* - add clean lowlevel I/O emulation for cards with MII-lacking PHYs
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/kernel.h>
#define DRV_VERSION "3.5.24-k2"DRV_EXT
#define DRV_DESCRIPTION "Intel(R) PRO/100 Network Driver"
#define DRV_COPYRIGHT "Copyright(c) 1999-2006 Intel Corporation"
-#define PFX DRV_NAME ": "
#define E100_WATCHDOG_PERIOD (2 * HZ)
#define E100_NAPI_WEIGHT 16
MODULE_PARM_DESC(debug, "Debug level (0=none,...,16=all)");
MODULE_PARM_DESC(eeprom_bad_csum_allow, "Allow bad eeprom checksums");
MODULE_PARM_DESC(use_io, "Force use of i/o access mode");
-#define DPRINTK(nlevel, klevel, fmt, args...) \
- (void)((NETIF_MSG_##nlevel & nic->msg_enable) && \
- printk(KERN_##klevel PFX "%s: %s: " fmt, nic->netdev->name, \
- __func__ , ## args))
#define INTEL_8255X_ETHERNET_DEVICE(device_id, ich) {\
PCI_VENDOR_ID_INTEL, device_id, PCI_ANY_ID, PCI_ANY_ID, \
/* Check results of self-test */
if (nic->mem->selftest.result != 0) {
- DPRINTK(HW, ERR, "Self-test failed: result=0x%08X\n",
- nic->mem->selftest.result);
+ netif_err(nic, hw, nic->netdev,
+ "Self-test failed: result=0x%08X\n",
+ nic->mem->selftest.result);
return -ETIMEDOUT;
}
if (nic->mem->selftest.signature == 0) {
- DPRINTK(HW, ERR, "Self-test failed: timed out\n");
+ netif_err(nic, hw, nic->netdev, "Self-test failed: timed out\n");
return -ETIMEDOUT;
}
/* The checksum, stored in the last word, is calculated such that
* the sum of words should be 0xBABA */
if (cpu_to_le16(0xBABA - checksum) != nic->eeprom[nic->eeprom_wc - 1]) {
- DPRINTK(PROBE, ERR, "EEPROM corrupted\n");
+ netif_err(nic, probe, nic->netdev, "EEPROM corrupted\n");
if (!eeprom_bad_csum_allow)
return -EAGAIN;
}
udelay(20);
}
if (unlikely(!i)) {
- printk("e100.mdio_ctrl(%s) won't go Ready\n",
- nic->netdev->name );
+ netdev_err(nic->netdev, "e100.mdio_ctrl won't go Ready\n");
spin_unlock_irqrestore(&nic->mdio_lock, flags);
return 0; /* No way to indicate timeout error */
}
break;
}
spin_unlock_irqrestore(&nic->mdio_lock, flags);
- DPRINTK(HW, DEBUG,
- "%s:addr=%d, reg=%d, data_in=0x%04X, data_out=0x%04X\n",
- dir == mdi_read ? "READ" : "WRITE", addr, reg, data, data_out);
+ netif_printk(nic, hw, KERN_DEBUG, nic->netdev,
+ "%s:addr=%d, reg=%d, data_in=0x%04X, data_out=0x%04X\n",
+ dir == mdi_read ? "READ" : "WRITE",
+ addr, reg, data, data_out);
return (u16)data_out;
}
return ADVERTISE_10HALF |
ADVERTISE_10FULL;
default:
- DPRINTK(HW, DEBUG,
- "%s:addr=%d, reg=%d, data=0x%04X: unimplemented emulation!\n",
- dir == mdi_read ? "READ" : "WRITE", addr, reg, data);
+ netif_printk(nic, hw, KERN_DEBUG, nic->netdev,
+ "%s:addr=%d, reg=%d, data=0x%04X: unimplemented emulation!\n",
+ dir == mdi_read ? "READ" : "WRITE",
+ addr, reg, data);
return 0xFFFF;
}
} else {
switch (reg) {
default:
- DPRINTK(HW, DEBUG,
- "%s:addr=%d, reg=%d, data=0x%04X: unimplemented emulation!\n",
- dir == mdi_read ? "READ" : "WRITE", addr, reg, data);
+ netif_printk(nic, hw, KERN_DEBUG, nic->netdev,
+ "%s:addr=%d, reg=%d, data=0x%04X: unimplemented emulation!\n",
+ dir == mdi_read ? "READ" : "WRITE",
+ addr, reg, data);
return 0xFFFF;
}
}
}
}
- DPRINTK(HW, DEBUG, "[00-07]=%02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X\n",
- c[0], c[1], c[2], c[3], c[4], c[5], c[6], c[7]);
- DPRINTK(HW, DEBUG, "[08-15]=%02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X\n",
- c[8], c[9], c[10], c[11], c[12], c[13], c[14], c[15]);
- DPRINTK(HW, DEBUG, "[16-23]=%02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X\n",
- c[16], c[17], c[18], c[19], c[20], c[21], c[22], c[23]);
+ netif_printk(nic, hw, KERN_DEBUG, nic->netdev,
+ "[00-07]=%02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X\n",
+ c[0], c[1], c[2], c[3], c[4], c[5], c[6], c[7]);
+ netif_printk(nic, hw, KERN_DEBUG, nic->netdev,
+ "[08-15]=%02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X\n",
+ c[8], c[9], c[10], c[11], c[12], c[13], c[14], c[15]);
+ netif_printk(nic, hw, KERN_DEBUG, nic->netdev,
+ "[16-23]=%02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X\n",
+ c[16], c[17], c[18], c[19], c[20], c[21], c[22], c[23]);
}
/*************************************************************************
err = request_firmware(&fw, fw_name, &nic->pdev->dev);
if (err) {
- DPRINTK(PROBE, ERR, "Failed to load firmware \"%s\": %d\n",
- fw_name, err);
+ netif_err(nic, probe, nic->netdev,
+ "Failed to load firmware \"%s\": %d\n",
+ fw_name, err);
return ERR_PTR(err);
}
/* Firmware should be precisely UCODE_SIZE (words) plus three bytes
indicating the offsets for BUNDLESMALL, BUNDLEMAX, INTDELAY */
if (fw->size != UCODE_SIZE * 4 + 3) {
- DPRINTK(PROBE, ERR, "Firmware \"%s\" has wrong size %zu\n",
- fw_name, fw->size);
+ netif_err(nic, probe, nic->netdev,
+ "Firmware \"%s\" has wrong size %zu\n",
+ fw_name, fw->size);
release_firmware(fw);
return ERR_PTR(-EINVAL);
}
if (timer >= UCODE_SIZE || bundle >= UCODE_SIZE ||
min_size >= UCODE_SIZE) {
- DPRINTK(PROBE, ERR,
- "\"%s\" has bogus offset values (0x%x,0x%x,0x%x)\n",
- fw_name, timer, bundle, min_size);
+ netif_err(nic, probe, nic->netdev,
+ "\"%s\" has bogus offset values (0x%x,0x%x,0x%x)\n",
+ fw_name, timer, bundle, min_size);
release_firmware(fw);
return ERR_PTR(-EINVAL);
}
return PTR_ERR(fw);
if ((err = e100_exec_cb(nic, (void *)fw, e100_setup_ucode)))
- DPRINTK(PROBE,ERR, "ucode cmd failed with error %d\n", err);
+ netif_err(nic, probe, nic->netdev,
+ "ucode cmd failed with error %d\n", err);
/* must restart cuc */
nic->cuc_cmd = cuc_start;
/* if the command failed, or is not OK, notify and return */
if (!counter || !(cb->status & cpu_to_le16(cb_ok))) {
- DPRINTK(PROBE,ERR, "ucode load failed\n");
+ netif_err(nic, probe, nic->netdev, "ucode load failed\n");
err = -EPERM;
}
* media is sensed automatically based on how the link partner
* is configured. This is, in essence, manual configuration.
*/
- DPRINTK(PROBE, INFO,
- "found MII-less i82503 or 80c24 or other PHY\n");
+ netif_info(nic, probe, nic->netdev,
+ "found MII-less i82503 or 80c24 or other PHY\n");
nic->mdio_ctrl = mdio_ctrl_phy_mii_emulated;
nic->mii.phy_id = 0; /* is this ok for an MII-less PHY? */
return 0; /* simply return and hope for the best */
else {
/* for unknown cases log a fatal error */
- DPRINTK(HW, ERR,
- "Failed to locate any known PHY, aborting.\n");
+ netif_err(nic, hw, nic->netdev,
+ "Failed to locate any known PHY, aborting\n");
return -EAGAIN;
}
} else
- DPRINTK(HW, DEBUG, "phy_addr = %d\n", nic->mii.phy_id);
+ netif_printk(nic, hw, KERN_DEBUG, nic->netdev,
+ "phy_addr = %d\n", nic->mii.phy_id);
/* Get phy ID */
id_lo = mdio_read(netdev, nic->mii.phy_id, MII_PHYSID1);
id_hi = mdio_read(netdev, nic->mii.phy_id, MII_PHYSID2);
nic->phy = (u32)id_hi << 16 | (u32)id_lo;
- DPRINTK(HW, DEBUG, "phy ID = 0x%08X\n", nic->phy);
+ netif_printk(nic, hw, KERN_DEBUG, nic->netdev,
+ "phy ID = 0x%08X\n", nic->phy);
/* Select the phy and isolate the rest */
for (addr = 0; addr < 32; addr++) {
e100_hw_reset(nic);
- DPRINTK(HW, ERR, "e100_hw_init\n");
+ netif_err(nic, hw, nic->netdev, "e100_hw_init\n");
if (!in_interrupt() && (err = e100_self_test(nic)))
return err;
{
struct nic *nic = netdev_priv(netdev);
- DPRINTK(HW, DEBUG, "mc_count=%d, flags=0x%04X\n",
- netdev_mc_count(netdev), netdev->flags);
+ netif_printk(nic, hw, KERN_DEBUG, nic->netdev,
+ "mc_count=%d, flags=0x%04X\n",
+ netdev_mc_count(netdev), netdev->flags);
if (netdev->flags & IFF_PROMISC)
nic->flags |= promiscuous;
if (e100_exec_cmd(nic, cuc_dump_reset, 0))
- DPRINTK(TX_ERR, DEBUG, "exec cuc_dump_reset failed\n");
+ netif_printk(nic, tx_err, KERN_DEBUG, nic->netdev,
+ "exec cuc_dump_reset failed\n");
}
static void e100_adjust_adaptive_ifs(struct nic *nic, int speed, int duplex)
struct nic *nic = (struct nic *)data;
struct ethtool_cmd cmd;
- DPRINTK(TIMER, DEBUG, "right now = %ld\n", jiffies);
+ netif_printk(nic, timer, KERN_DEBUG, nic->netdev,
+ "right now = %ld\n", jiffies);
/* mii library handles link maintenance tasks */
mii_ethtool_gset(&nic->mii, &cmd);
if (mii_link_ok(&nic->mii) && !netif_carrier_ok(nic->netdev)) {
- printk(KERN_INFO "e100: %s NIC Link is Up %s Mbps %s Duplex\n",
- nic->netdev->name,
- cmd.speed == SPEED_100 ? "100" : "10",
- cmd.duplex == DUPLEX_FULL ? "Full" : "Half");
+ netdev_info(nic->netdev, "NIC Link is Up %u Mbps %s Duplex\n",
+ cmd.speed == SPEED_100 ? 100 : 10,
+ cmd.duplex == DUPLEX_FULL ? "Full" : "Half");
} else if (!mii_link_ok(&nic->mii) && netif_carrier_ok(nic->netdev)) {
- printk(KERN_INFO "e100: %s NIC Link is Down\n",
- nic->netdev->name);
+ netdev_info(nic->netdev, "NIC Link is Down\n");
}
mii_check_link(&nic->mii);
Issue a NOP command followed by a 1us delay before
issuing the Tx command. */
if (e100_exec_cmd(nic, cuc_nop, 0))
- DPRINTK(TX_ERR, DEBUG, "exec cuc_nop failed\n");
+ netif_printk(nic, tx_err, KERN_DEBUG, nic->netdev,
+ "exec cuc_nop failed\n");
udelay(1);
}
switch (err) {
case -ENOSPC:
/* We queued the skb, but now we're out of space. */
- DPRINTK(TX_ERR, DEBUG, "No space for CB\n");
+ netif_printk(nic, tx_err, KERN_DEBUG, nic->netdev,
+ "No space for CB\n");
netif_stop_queue(netdev);
break;
case -ENOMEM:
/* This is a hard error - log it. */
- DPRINTK(TX_ERR, DEBUG, "Out of Tx resources, returning skb\n");
+ netif_printk(nic, tx_err, KERN_DEBUG, nic->netdev,
+ "Out of Tx resources, returning skb\n");
netif_stop_queue(netdev);
return NETDEV_TX_BUSY;
}
for (cb = nic->cb_to_clean;
cb->status & cpu_to_le16(cb_complete);
cb = nic->cb_to_clean = cb->next) {
- DPRINTK(TX_DONE, DEBUG, "cb[%d]->status = 0x%04X\n",
- (int)(((void*)cb - (void*)nic->cbs)/sizeof(struct cb)),
- cb->status);
+ netif_printk(nic, tx_done, KERN_DEBUG, nic->netdev,
+ "cb[%d]->status = 0x%04X\n",
+ (int)(((void*)cb - (void*)nic->cbs)/sizeof(struct cb)),
+ cb->status);
if (likely(cb->skb != NULL)) {
dev->stats.tx_packets++;
sizeof(struct rfd), PCI_DMA_BIDIRECTIONAL);
rfd_status = le16_to_cpu(rfd->status);
- DPRINTK(RX_STATUS, DEBUG, "status=0x%04X\n", rfd_status);
+ netif_printk(nic, rx_status, KERN_DEBUG, nic->netdev,
+ "status=0x%04X\n", rfd_status);
/* If data isn't ready, nothing to indicate */
if (unlikely(!(rfd_status & cb_complete))) {
struct nic *nic = netdev_priv(netdev);
u8 stat_ack = ioread8(&nic->csr->scb.stat_ack);
- DPRINTK(INTR, DEBUG, "stat_ack = 0x%02X\n", stat_ack);
+ netif_printk(nic, intr, KERN_DEBUG, nic->netdev,
+ "stat_ack = 0x%02X\n", stat_ack);
if (stat_ack == stat_ack_not_ours || /* Not our interrupt */
stat_ack == stat_ack_not_present) /* Hardware is ejected */
struct nic *nic = container_of(work, struct nic, tx_timeout_task);
struct net_device *netdev = nic->netdev;
- DPRINTK(TX_ERR, DEBUG, "scb.status=0x%02X\n",
- ioread8(&nic->csr->scb.status));
+ netif_printk(nic, tx_err, KERN_DEBUG, nic->netdev,
+ "scb.status=0x%02X\n", ioread8(&nic->csr->scb.status));
e100_down(netdev_priv(netdev));
e100_up(netdev_priv(netdev));
}
rfds->count = min(rfds->count, rfds->max);
cbs->count = max(ring->tx_pending, cbs->min);
cbs->count = min(cbs->count, cbs->max);
- DPRINTK(DRV, INFO, "Ring Param settings: rx: %d, tx %d\n",
- rfds->count, cbs->count);
+ netif_info(nic, drv, nic->netdev, "Ring Param settings: rx: %d, tx %d\n",
+ rfds->count, cbs->count);
if (netif_running(netdev))
e100_up(nic);
netif_carrier_off(netdev);
if ((err = e100_up(nic)))
- DPRINTK(IFUP, ERR, "Cannot open interface, aborting.\n");
+ netif_err(nic, ifup, nic->netdev, "Cannot open interface, aborting\n");
return err;
}
if (!(netdev = alloc_etherdev(sizeof(struct nic)))) {
if (((1 << debug) - 1) & NETIF_MSG_PROBE)
- printk(KERN_ERR PFX "Etherdev alloc failed, abort.\n");
+ pr_err("Etherdev alloc failed, aborting\n");
return -ENOMEM;
}
pci_set_drvdata(pdev, netdev);
if ((err = pci_enable_device(pdev))) {
- DPRINTK(PROBE, ERR, "Cannot enable PCI device, aborting.\n");
+ netif_err(nic, probe, nic->netdev, "Cannot enable PCI device, aborting\n");
goto err_out_free_dev;
}
if (!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM)) {
- DPRINTK(PROBE, ERR, "Cannot find proper PCI device "
- "base address, aborting.\n");
+ netif_err(nic, probe, nic->netdev, "Cannot find proper PCI device base address, aborting\n");
err = -ENODEV;
goto err_out_disable_pdev;
}
if ((err = pci_request_regions(pdev, DRV_NAME))) {
- DPRINTK(PROBE, ERR, "Cannot obtain PCI resources, aborting.\n");
+ netif_err(nic, probe, nic->netdev, "Cannot obtain PCI resources, aborting\n");
goto err_out_disable_pdev;
}
if ((err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32)))) {
- DPRINTK(PROBE, ERR, "No usable DMA configuration, aborting.\n");
+ netif_err(nic, probe, nic->netdev, "No usable DMA configuration, aborting\n");
goto err_out_free_res;
}
SET_NETDEV_DEV(netdev, &pdev->dev);
if (use_io)
- DPRINTK(PROBE, INFO, "using i/o access mode\n");
+ netif_info(nic, probe, nic->netdev, "using i/o access mode\n");
nic->csr = pci_iomap(pdev, (use_io ? 1 : 0), sizeof(struct csr));
if (!nic->csr) {
- DPRINTK(PROBE, ERR, "Cannot map device registers, aborting.\n");
+ netif_err(nic, probe, nic->netdev, "Cannot map device registers, aborting\n");
err = -ENOMEM;
goto err_out_free_res;
}
INIT_WORK(&nic->tx_timeout_task, e100_tx_timeout_task);
if ((err = e100_alloc(nic))) {
- DPRINTK(PROBE, ERR, "Cannot alloc driver memory, aborting.\n");
+ netif_err(nic, probe, nic->netdev, "Cannot alloc driver memory, aborting\n");
goto err_out_iounmap;
}
memcpy(netdev->perm_addr, nic->eeprom, ETH_ALEN);
if (!is_valid_ether_addr(netdev->perm_addr)) {
if (!eeprom_bad_csum_allow) {
- DPRINTK(PROBE, ERR, "Invalid MAC address from "
- "EEPROM, aborting.\n");
+ netif_err(nic, probe, nic->netdev, "Invalid MAC address from EEPROM, aborting\n");
err = -EAGAIN;
goto err_out_free;
} else {
- DPRINTK(PROBE, ERR, "Invalid MAC address from EEPROM, "
- "you MUST configure one.\n");
+ netif_err(nic, probe, nic->netdev, "Invalid MAC address from EEPROM, you MUST configure one.\n");
}
}
strcpy(netdev->name, "eth%d");
if ((err = register_netdev(netdev))) {
- DPRINTK(PROBE, ERR, "Cannot register net device, aborting.\n");
+ netif_err(nic, probe, nic->netdev, "Cannot register net device, aborting\n");
goto err_out_free;
}
nic->cbs_pool = pci_pool_create(netdev->name,
nic->params.cbs.max * sizeof(struct cb),
sizeof(u32),
0);
- DPRINTK(PROBE, INFO, "addr 0x%llx, irq %d, MAC addr %pM\n",
- (unsigned long long)pci_resource_start(pdev, use_io ? 1 : 0),
- pdev->irq, netdev->dev_addr);
+ netif_info(nic, probe, nic->netdev,
+ "addr 0x%llx, irq %d, MAC addr %pM\n",
+ (unsigned long long)pci_resource_start(pdev, use_io ? 1 : 0),
+ pdev->irq, netdev->dev_addr);
return 0;
struct nic *nic = netdev_priv(netdev);
if (pci_enable_device(pdev)) {
- printk(KERN_ERR "e100: Cannot re-enable PCI device after reset.\n");
+ pr_err("Cannot re-enable PCI device after reset\n");
return PCI_ERS_RESULT_DISCONNECT;
}
pci_set_master(pdev);
static int __init e100_init_module(void)
{
if (((1 << debug) - 1) & NETIF_MSG_DRV) {
- printk(KERN_INFO PFX "%s, %s\n", DRV_DESCRIPTION, DRV_VERSION);
- printk(KERN_INFO PFX "%s\n", DRV_COPYRIGHT);
+ pr_info("%s, %s\n", DRV_DESCRIPTION, DRV_VERSION);
+ pr_info("%s\n", DRV_COPYRIGHT);
}
return pci_register_driver(&e100_driver);
}
git://bbs.cooldavid.org / net-next-2.6.git / commitdiff