USB: musb: Enable the maximum supported burst mode for DMA

Setting MUSB Burst Mode 3 automatically enables support for
lower burst modes (BURST4, BURST8, BURST16 or bursts of unspecified
length). There is no need to set these burst modes based on the
packet size. Also enable the burst mode for both mode1 and mode0.

This is a fix for buggy hardware - having the lower burst modes
enabled can potentially cause lockups of the DMA engine used in
OMAP2/3/4 chips.

Signed-off-by: Hema HK <hemahk@ti.com>
Signed-off-by: Anand Gadiyar <gadiyar@ti.com>
Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
Acked-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

diff --git a/drivers/usb/musb/musbhsdma.c b/drivers/usb/musb/musbhsdma.c
index 1008044a3bbc38efc580ae72211fd7a33b29d4d3..dc66e4376d4906a4454b90a393851cd72631aefa 100644 (file)
--- a/drivers/usb/musb/musbhsdma.c
+++ b/drivers/usb/musb/musbhsdma.c
@@ -132,18 +132,9 @@ static void configure_channel(struct dma_channel *channel,
        if (mode) {
                csr |= 1 << MUSB_HSDMA_MODE1_SHIFT;
                BUG_ON(len < packet_sz);
-
-               if (packet_sz >= 64) {
-                       csr |= MUSB_HSDMA_BURSTMODE_INCR16
-                                       << MUSB_HSDMA_BURSTMODE_SHIFT;
-               } else if (packet_sz >= 32) {
-                       csr |= MUSB_HSDMA_BURSTMODE_INCR8
-                                       << MUSB_HSDMA_BURSTMODE_SHIFT;
-               } else if (packet_sz >= 16) {
-                       csr |= MUSB_HSDMA_BURSTMODE_INCR4
-                                       << MUSB_HSDMA_BURSTMODE_SHIFT;
-               }
        }
+       csr |= MUSB_HSDMA_BURSTMODE_INCR16
+                               << MUSB_HSDMA_BURSTMODE_SHIFT;
 
        csr |= (musb_channel->epnum << MUSB_HSDMA_ENDPOINT_SHIFT)
                | (1 << MUSB_HSDMA_ENABLE_SHIFT)