.get_hcmd_size = iwl3945_get_hcmd_size,
.build_addsta_hcmd = iwl3945_build_addsta_hcmd,
.rts_tx_cmd_flag = iwlcore_rts_tx_cmd_flag,
+ .request_scan = iwl3945_request_scan,
};
static const struct iwl_ops iwl3945_ops = {
extern int iwl3945_rs_next_rate(struct iwl_priv *priv, int rate);
+/* scanning */
+void iwl3945_request_scan(struct iwl_priv *priv);
+
/* Requires full declaration of iwl_priv before including */
#include "iwl-io.h"
.gain_computation = iwl4965_gain_computation,
.rts_tx_cmd_flag = iwlcore_rts_tx_cmd_flag,
.calc_rssi = iwl4965_calc_rssi,
+ .request_scan = iwlagn_request_scan,
};
static struct iwl_lib_ops iwl4965_lib = {
.chain_noise_reset = iwlagn_chain_noise_reset,
.rts_tx_cmd_flag = iwlagn_rts_tx_cmd_flag,
.calc_rssi = iwlagn_calc_rssi,
+ .request_scan = iwlagn_request_scan,
};
memcpy(&priv->_agn.last_phy_res, pkt->u.raw,
sizeof(struct iwl_rx_phy_res));
}
+
+static int iwl_get_single_channel_for_scan(struct iwl_priv *priv,
+ enum ieee80211_band band,
+ struct iwl_scan_channel *scan_ch)
+{
+ const struct ieee80211_supported_band *sband;
+ const struct iwl_channel_info *ch_info;
+ u16 passive_dwell = 0;
+ u16 active_dwell = 0;
+ int i, added = 0;
+ u16 channel = 0;
+
+ sband = iwl_get_hw_mode(priv, band);
+ if (!sband) {
+ IWL_ERR(priv, "invalid band\n");
+ return added;
+ }
+
+ active_dwell = iwl_get_active_dwell_time(priv, band, 0);
+ passive_dwell = iwl_get_passive_dwell_time(priv, band);
+
+ if (passive_dwell <= active_dwell)
+ passive_dwell = active_dwell + 1;
+
+ /* only scan single channel, good enough to reset the RF */
+ /* pick the first valid not in-use channel */
+ if (band == IEEE80211_BAND_5GHZ) {
+ for (i = 14; i < priv->channel_count; i++) {
+ if (priv->channel_info[i].channel !=
+ le16_to_cpu(priv->staging_rxon.channel)) {
+ channel = priv->channel_info[i].channel;
+ ch_info = iwl_get_channel_info(priv,
+ band, channel);
+ if (is_channel_valid(ch_info))
+ break;
+ }
+ }
+ } else {
+ for (i = 0; i < 14; i++) {
+ if (priv->channel_info[i].channel !=
+ le16_to_cpu(priv->staging_rxon.channel)) {
+ channel =
+ priv->channel_info[i].channel;
+ ch_info = iwl_get_channel_info(priv,
+ band, channel);
+ if (is_channel_valid(ch_info))
+ break;
+ }
+ }
+ }
+ if (channel) {
+ scan_ch->channel = cpu_to_le16(channel);
+ scan_ch->type = SCAN_CHANNEL_TYPE_PASSIVE;
+ scan_ch->active_dwell = cpu_to_le16(active_dwell);
+ scan_ch->passive_dwell = cpu_to_le16(passive_dwell);
+ /* Set txpower levels to defaults */
+ scan_ch->dsp_atten = 110;
+ if (band == IEEE80211_BAND_5GHZ)
+ scan_ch->tx_gain = ((1 << 5) | (3 << 3)) | 3;
+ else
+ scan_ch->tx_gain = ((1 << 5) | (5 << 3));
+ added++;
+ } else
+ IWL_ERR(priv, "no valid channel found\n");
+ return added;
+}
+
+static int iwl_get_channels_for_scan(struct iwl_priv *priv,
+ enum ieee80211_band band,
+ u8 is_active, u8 n_probes,
+ struct iwl_scan_channel *scan_ch)
+{
+ struct ieee80211_channel *chan;
+ const struct ieee80211_supported_band *sband;
+ const struct iwl_channel_info *ch_info;
+ u16 passive_dwell = 0;
+ u16 active_dwell = 0;
+ int added, i;
+ u16 channel;
+
+ sband = iwl_get_hw_mode(priv, band);
+ if (!sband)
+ return 0;
+
+ active_dwell = iwl_get_active_dwell_time(priv, band, n_probes);
+ passive_dwell = iwl_get_passive_dwell_time(priv, band);
+
+ if (passive_dwell <= active_dwell)
+ passive_dwell = active_dwell + 1;
+
+ for (i = 0, added = 0; i < priv->scan_request->n_channels; i++) {
+ chan = priv->scan_request->channels[i];
+
+ if (chan->band != band)
+ continue;
+
+ channel = ieee80211_frequency_to_channel(chan->center_freq);
+ scan_ch->channel = cpu_to_le16(channel);
+
+ ch_info = iwl_get_channel_info(priv, band, channel);
+ if (!is_channel_valid(ch_info)) {
+ IWL_DEBUG_SCAN(priv, "Channel %d is INVALID for this band.\n",
+ channel);
+ continue;
+ }
+
+ if (!is_active || is_channel_passive(ch_info) ||
+ (chan->flags & IEEE80211_CHAN_PASSIVE_SCAN))
+ scan_ch->type = SCAN_CHANNEL_TYPE_PASSIVE;
+ else
+ scan_ch->type = SCAN_CHANNEL_TYPE_ACTIVE;
+
+ if (n_probes)
+ scan_ch->type |= IWL_SCAN_PROBE_MASK(n_probes);
+
+ scan_ch->active_dwell = cpu_to_le16(active_dwell);
+ scan_ch->passive_dwell = cpu_to_le16(passive_dwell);
+
+ /* Set txpower levels to defaults */
+ scan_ch->dsp_atten = 110;
+
+ /* NOTE: if we were doing 6Mb OFDM for scans we'd use
+ * power level:
+ * scan_ch->tx_gain = ((1 << 5) | (2 << 3)) | 3;
+ */
+ if (band == IEEE80211_BAND_5GHZ)
+ scan_ch->tx_gain = ((1 << 5) | (3 << 3)) | 3;
+ else
+ scan_ch->tx_gain = ((1 << 5) | (5 << 3));
+
+ IWL_DEBUG_SCAN(priv, "Scanning ch=%d prob=0x%X [%s %d]\n",
+ channel, le32_to_cpu(scan_ch->type),
+ (scan_ch->type & SCAN_CHANNEL_TYPE_ACTIVE) ?
+ "ACTIVE" : "PASSIVE",
+ (scan_ch->type & SCAN_CHANNEL_TYPE_ACTIVE) ?
+ active_dwell : passive_dwell);
+
+ scan_ch++;
+ added++;
+ }
+
+ IWL_DEBUG_SCAN(priv, "total channels to scan %d\n", added);
+ return added;
+}
+
+void iwlagn_request_scan(struct iwl_priv *priv)
+{
+ struct iwl_host_cmd cmd = {
+ .id = REPLY_SCAN_CMD,
+ .len = sizeof(struct iwl_scan_cmd),
+ .flags = CMD_SIZE_HUGE,
+ };
+ struct iwl_scan_cmd *scan;
+ struct ieee80211_conf *conf = NULL;
+ u32 rate_flags = 0;
+ u16 cmd_len;
+ u16 rx_chain = 0;
+ enum ieee80211_band band;
+ u8 n_probes = 0;
+ u8 rx_ant = priv->hw_params.valid_rx_ant;
+ u8 rate;
+ bool is_active = false;
+ int chan_mod;
+ u8 active_chains;
+
+ conf = ieee80211_get_hw_conf(priv->hw);
+
+ cancel_delayed_work(&priv->scan_check);
+
+ if (!iwl_is_ready(priv)) {
+ IWL_WARN(priv, "request scan called when driver not ready.\n");
+ goto done;
+ }
+
+ /* Make sure the scan wasn't canceled before this queued work
+ * was given the chance to run... */
+ if (!test_bit(STATUS_SCANNING, &priv->status))
+ goto done;
+
+ /* This should never be called or scheduled if there is currently
+ * a scan active in the hardware. */
+ if (test_bit(STATUS_SCAN_HW, &priv->status)) {
+ IWL_DEBUG_INFO(priv, "Multiple concurrent scan requests in parallel. "
+ "Ignoring second request.\n");
+ goto done;
+ }
+
+ if (test_bit(STATUS_EXIT_PENDING, &priv->status)) {
+ IWL_DEBUG_SCAN(priv, "Aborting scan due to device shutdown\n");
+ goto done;
+ }
+
+ if (test_bit(STATUS_SCAN_ABORTING, &priv->status)) {
+ IWL_DEBUG_HC(priv, "Scan request while abort pending. Queuing.\n");
+ goto done;
+ }
+
+ if (iwl_is_rfkill(priv)) {
+ IWL_DEBUG_HC(priv, "Aborting scan due to RF Kill activation\n");
+ goto done;
+ }
+
+ if (!test_bit(STATUS_READY, &priv->status)) {
+ IWL_DEBUG_HC(priv, "Scan request while uninitialized. Queuing.\n");
+ goto done;
+ }
+
+ if (!priv->scan_cmd) {
+ priv->scan_cmd = kmalloc(sizeof(struct iwl_scan_cmd) +
+ IWL_MAX_SCAN_SIZE, GFP_KERNEL);
+ if (!priv->scan_cmd) {
+ IWL_DEBUG_SCAN(priv,
+ "fail to allocate memory for scan\n");
+ goto done;
+ }
+ }
+ scan = priv->scan_cmd;
+ memset(scan, 0, sizeof(struct iwl_scan_cmd) + IWL_MAX_SCAN_SIZE);
+
+ scan->quiet_plcp_th = IWL_PLCP_QUIET_THRESH;
+ scan->quiet_time = IWL_ACTIVE_QUIET_TIME;
+
+ if (iwl_is_associated(priv)) {
+ u16 interval = 0;
+ u32 extra;
+ u32 suspend_time = 100;
+ u32 scan_suspend_time = 100;
+ unsigned long flags;
+
+ IWL_DEBUG_INFO(priv, "Scanning while associated...\n");
+ spin_lock_irqsave(&priv->lock, flags);
+ interval = priv->beacon_int;
+ spin_unlock_irqrestore(&priv->lock, flags);
+
+ scan->suspend_time = 0;
+ scan->max_out_time = cpu_to_le32(200 * 1024);
+ if (!interval)
+ interval = suspend_time;
+
+ extra = (suspend_time / interval) << 22;
+ scan_suspend_time = (extra |
+ ((suspend_time % interval) * 1024));
+ scan->suspend_time = cpu_to_le32(scan_suspend_time);
+ IWL_DEBUG_SCAN(priv, "suspend_time 0x%X beacon interval %d\n",
+ scan_suspend_time, interval);
+ }
+
+ if (priv->is_internal_short_scan) {
+ IWL_DEBUG_SCAN(priv, "Start internal passive scan.\n");
+ } else if (priv->scan_request->n_ssids) {
+ int i, p = 0;
+ IWL_DEBUG_SCAN(priv, "Kicking off active scan\n");
+ for (i = 0; i < priv->scan_request->n_ssids; i++) {
+ /* always does wildcard anyway */
+ if (!priv->scan_request->ssids[i].ssid_len)
+ continue;
+ scan->direct_scan[p].id = WLAN_EID_SSID;
+ scan->direct_scan[p].len =
+ priv->scan_request->ssids[i].ssid_len;
+ memcpy(scan->direct_scan[p].ssid,
+ priv->scan_request->ssids[i].ssid,
+ priv->scan_request->ssids[i].ssid_len);
+ n_probes++;
+ p++;
+ }
+ is_active = true;
+ } else
+ IWL_DEBUG_SCAN(priv, "Start passive scan.\n");
+
+ scan->tx_cmd.tx_flags = TX_CMD_FLG_SEQ_CTL_MSK;
+ scan->tx_cmd.sta_id = priv->hw_params.bcast_sta_id;
+ scan->tx_cmd.stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE;
+
+ switch (priv->scan_band) {
+ case IEEE80211_BAND_2GHZ:
+ scan->flags = RXON_FLG_BAND_24G_MSK | RXON_FLG_AUTO_DETECT_MSK;
+ chan_mod = le32_to_cpu(priv->active_rxon.flags & RXON_FLG_CHANNEL_MODE_MSK)
+ >> RXON_FLG_CHANNEL_MODE_POS;
+ if (chan_mod == CHANNEL_MODE_PURE_40) {
+ rate = IWL_RATE_6M_PLCP;
+ } else {
+ rate = IWL_RATE_1M_PLCP;
+ rate_flags = RATE_MCS_CCK_MSK;
+ }
+ scan->good_CRC_th = 0;
+ break;
+ case IEEE80211_BAND_5GHZ:
+ rate = IWL_RATE_6M_PLCP;
+ /*
+ * If active scaning is requested but a certain channel
+ * is marked passive, we can do active scanning if we
+ * detect transmissions.
+ */
+ scan->good_CRC_th = is_active ? IWL_GOOD_CRC_TH : 0;
+
+ /* Force use of chains B and C (0x6) for scan Rx
+ * Avoid A (0x1) for the device has off-channel reception
+ * on A-band.
+ */
+ if (priv->cfg->off_channel_workaround)
+ rx_ant = ANT_BC;
+ break;
+ default:
+ IWL_WARN(priv, "Invalid scan band count\n");
+ goto done;
+ }
+
+ band = priv->scan_band;
+
+ priv->scan_tx_ant[band] =
+ iwl_toggle_tx_ant(priv, priv->scan_tx_ant[band]);
+ rate_flags |= iwl_ant_idx_to_flags(priv->scan_tx_ant[band]);
+ scan->tx_cmd.rate_n_flags = iwl_hw_set_rate_n_flags(rate, rate_flags);
+
+ /* In power save mode use one chain, otherwise use all chains */
+ if (test_bit(STATUS_POWER_PMI, &priv->status)) {
+ /* rx_ant has been set to all valid chains previously */
+ active_chains = rx_ant &
+ ((u8)(priv->chain_noise_data.active_chains));
+ if (!active_chains)
+ active_chains = rx_ant;
+
+ IWL_DEBUG_SCAN(priv, "chain_noise_data.active_chains: %u\n",
+ priv->chain_noise_data.active_chains);
+
+ rx_ant = first_antenna(active_chains);
+ }
+ /* MIMO is not used here, but value is required */
+ rx_chain |= priv->hw_params.valid_rx_ant << RXON_RX_CHAIN_VALID_POS;
+ rx_chain |= rx_ant << RXON_RX_CHAIN_FORCE_MIMO_SEL_POS;
+ rx_chain |= rx_ant << RXON_RX_CHAIN_FORCE_SEL_POS;
+ rx_chain |= 0x1 << RXON_RX_CHAIN_DRIVER_FORCE_POS;
+ scan->rx_chain = cpu_to_le16(rx_chain);
+ if (!priv->is_internal_short_scan) {
+ cmd_len = iwl_fill_probe_req(priv,
+ (struct ieee80211_mgmt *)scan->data,
+ priv->scan_request->ie,
+ priv->scan_request->ie_len,
+ IWL_MAX_SCAN_SIZE - sizeof(*scan));
+ } else {
+ cmd_len = iwl_fill_probe_req(priv,
+ (struct ieee80211_mgmt *)scan->data,
+ NULL, 0,
+ IWL_MAX_SCAN_SIZE - sizeof(*scan));
+
+ }
+ scan->tx_cmd.len = cpu_to_le16(cmd_len);
+ if (iwl_is_monitor_mode(priv))
+ scan->filter_flags = RXON_FILTER_PROMISC_MSK;
+
+ scan->filter_flags |= (RXON_FILTER_ACCEPT_GRP_MSK |
+ RXON_FILTER_BCON_AWARE_MSK);
+
+ if (priv->is_internal_short_scan) {
+ scan->channel_count =
+ iwl_get_single_channel_for_scan(priv, band,
+ (void *)&scan->data[le16_to_cpu(
+ scan->tx_cmd.len)]);
+ } else {
+ scan->channel_count =
+ iwl_get_channels_for_scan(priv, band,
+ is_active, n_probes,
+ (void *)&scan->data[le16_to_cpu(
+ scan->tx_cmd.len)]);
+ }
+ if (scan->channel_count == 0) {
+ IWL_DEBUG_SCAN(priv, "channel count %d\n", scan->channel_count);
+ goto done;
+ }
+
+ cmd.len += le16_to_cpu(scan->tx_cmd.len) +
+ scan->channel_count * sizeof(struct iwl_scan_channel);
+ cmd.data = scan;
+ scan->len = cpu_to_le16(cmd.len);
+
+ set_bit(STATUS_SCAN_HW, &priv->status);
+ if (iwl_send_cmd_sync(priv, &cmd))
+ goto done;
+
+ queue_delayed_work(priv->workqueue, &priv->scan_check,
+ IWL_SCAN_CHECK_WATCHDOG);
+
+ return;
+
+ done:
+ /* Cannot perform scan. Make sure we clear scanning
+ * bits from status so next scan request can be performed.
+ * If we don't clear scanning status bit here all next scan
+ * will fail
+ */
+ clear_bit(STATUS_SCAN_HW, &priv->status);
+ clear_bit(STATUS_SCANNING, &priv->status);
+ /* inform mac80211 scan aborted */
+ queue_work(priv->workqueue, &priv->scan_completed);
+}
(status == TX_STATUS_DIRECT_DONE);
}
+/* scan */
+void iwlagn_request_scan(struct iwl_priv *priv);
+
#endif /* __iwl_agn_h__ */
__le32 *tx_flags);
int (*calc_rssi)(struct iwl_priv *priv,
struct iwl_rx_phy_res *rx_resp);
+ void (*request_scan)(struct iwl_priv *priv);
};
struct iwl_apm_ops {
#define IWL_ACTIVE_QUIET_TIME cpu_to_le16(10) /* msec */
#define IWL_PLCP_QUIET_THRESH cpu_to_le16(1) /* packets */
+#define IWL_SCAN_CHECK_WATCHDOG (HZ * 7)
/*******************************************************************************
* Calibrations - implemented in iwl-calib.c
struct work_struct scan_completed;
struct work_struct rx_replenish;
struct work_struct abort_scan;
- struct work_struct request_scan;
struct work_struct beacon_update;
struct work_struct tt_work;
struct work_struct ct_enter;
}
EXPORT_SYMBOL(iwl_get_passive_dwell_time);
-static int iwl_get_single_channel_for_scan(struct iwl_priv *priv,
- enum ieee80211_band band,
- struct iwl_scan_channel *scan_ch)
-{
- const struct ieee80211_supported_band *sband;
- const struct iwl_channel_info *ch_info;
- u16 passive_dwell = 0;
- u16 active_dwell = 0;
- int i, added = 0;
- u16 channel = 0;
-
- sband = iwl_get_hw_mode(priv, band);
- if (!sband) {
- IWL_ERR(priv, "invalid band\n");
- return added;
- }
-
- active_dwell = iwl_get_active_dwell_time(priv, band, 0);
- passive_dwell = iwl_get_passive_dwell_time(priv, band);
-
- if (passive_dwell <= active_dwell)
- passive_dwell = active_dwell + 1;
-
- /* only scan single channel, good enough to reset the RF */
- /* pick the first valid not in-use channel */
- if (band == IEEE80211_BAND_5GHZ) {
- for (i = 14; i < priv->channel_count; i++) {
- if (priv->channel_info[i].channel !=
- le16_to_cpu(priv->staging_rxon.channel)) {
- channel = priv->channel_info[i].channel;
- ch_info = iwl_get_channel_info(priv,
- band, channel);
- if (is_channel_valid(ch_info))
- break;
- }
- }
- } else {
- for (i = 0; i < 14; i++) {
- if (priv->channel_info[i].channel !=
- le16_to_cpu(priv->staging_rxon.channel)) {
- channel =
- priv->channel_info[i].channel;
- ch_info = iwl_get_channel_info(priv,
- band, channel);
- if (is_channel_valid(ch_info))
- break;
- }
- }
- }
- if (channel) {
- scan_ch->channel = cpu_to_le16(channel);
- scan_ch->type = SCAN_CHANNEL_TYPE_PASSIVE;
- scan_ch->active_dwell = cpu_to_le16(active_dwell);
- scan_ch->passive_dwell = cpu_to_le16(passive_dwell);
- /* Set txpower levels to defaults */
- scan_ch->dsp_atten = 110;
- if (band == IEEE80211_BAND_5GHZ)
- scan_ch->tx_gain = ((1 << 5) | (3 << 3)) | 3;
- else
- scan_ch->tx_gain = ((1 << 5) | (5 << 3));
- added++;
- } else
- IWL_ERR(priv, "no valid channel found\n");
- return added;
-}
-
-static int iwl_get_channels_for_scan(struct iwl_priv *priv,
- enum ieee80211_band band,
- u8 is_active, u8 n_probes,
- struct iwl_scan_channel *scan_ch)
-{
- struct ieee80211_channel *chan;
- const struct ieee80211_supported_band *sband;
- const struct iwl_channel_info *ch_info;
- u16 passive_dwell = 0;
- u16 active_dwell = 0;
- int added, i;
- u16 channel;
-
- sband = iwl_get_hw_mode(priv, band);
- if (!sband)
- return 0;
-
- active_dwell = iwl_get_active_dwell_time(priv, band, n_probes);
- passive_dwell = iwl_get_passive_dwell_time(priv, band);
-
- if (passive_dwell <= active_dwell)
- passive_dwell = active_dwell + 1;
-
- for (i = 0, added = 0; i < priv->scan_request->n_channels; i++) {
- chan = priv->scan_request->channels[i];
-
- if (chan->band != band)
- continue;
-
- channel = ieee80211_frequency_to_channel(chan->center_freq);
- scan_ch->channel = cpu_to_le16(channel);
-
- ch_info = iwl_get_channel_info(priv, band, channel);
- if (!is_channel_valid(ch_info)) {
- IWL_DEBUG_SCAN(priv, "Channel %d is INVALID for this band.\n",
- channel);
- continue;
- }
-
- if (!is_active || is_channel_passive(ch_info) ||
- (chan->flags & IEEE80211_CHAN_PASSIVE_SCAN))
- scan_ch->type = SCAN_CHANNEL_TYPE_PASSIVE;
- else
- scan_ch->type = SCAN_CHANNEL_TYPE_ACTIVE;
-
- if (n_probes)
- scan_ch->type |= IWL_SCAN_PROBE_MASK(n_probes);
-
- scan_ch->active_dwell = cpu_to_le16(active_dwell);
- scan_ch->passive_dwell = cpu_to_le16(passive_dwell);
-
- /* Set txpower levels to defaults */
- scan_ch->dsp_atten = 110;
-
- /* NOTE: if we were doing 6Mb OFDM for scans we'd use
- * power level:
- * scan_ch->tx_gain = ((1 << 5) | (2 << 3)) | 3;
- */
- if (band == IEEE80211_BAND_5GHZ)
- scan_ch->tx_gain = ((1 << 5) | (3 << 3)) | 3;
- else
- scan_ch->tx_gain = ((1 << 5) | (5 << 3));
-
- IWL_DEBUG_SCAN(priv, "Scanning ch=%d prob=0x%X [%s %d]\n",
- channel, le32_to_cpu(scan_ch->type),
- (scan_ch->type & SCAN_CHANNEL_TYPE_ACTIVE) ?
- "ACTIVE" : "PASSIVE",
- (scan_ch->type & SCAN_CHANNEL_TYPE_ACTIVE) ?
- active_dwell : passive_dwell);
-
- scan_ch++;
- added++;
- }
-
- IWL_DEBUG_SCAN(priv, "total channels to scan %d\n", added);
- return added;
-}
-
void iwl_init_scan_params(struct iwl_priv *priv)
{
u8 ant_idx = fls(priv->hw_params.valid_tx_ant) - 1;
priv->is_internal_short_scan = false;
priv->scan_start = jiffies;
- queue_work(priv->workqueue, &priv->request_scan);
+ if (WARN_ON(!priv->cfg->ops->utils->request_scan))
+ return -EOPNOTSUPP;
+
+ priv->cfg->ops->utils->request_scan(priv);
return 0;
}
int iwl_mac_hw_scan(struct ieee80211_hw *hw,
struct cfg80211_scan_request *req)
{
- unsigned long flags;
struct iwl_priv *priv = hw->priv;
int ret;
return -EINVAL;
mutex_lock(&priv->mutex);
- spin_lock_irqsave(&priv->lock, flags);
if (!iwl_is_ready_rf(priv)) {
ret = -EIO;
IWL_DEBUG_MAC80211(priv, "leave\n");
out_unlock:
- spin_unlock_irqrestore(&priv->lock, flags);
mutex_unlock(&priv->mutex);
return ret;
IWL_DEBUG_SCAN(priv, "Start internal short scan...\n");
set_bit(STATUS_SCANNING, &priv->status);
priv->is_internal_short_scan = true;
- queue_work(priv->workqueue, &priv->request_scan);
+
+ if (WARN_ON(!priv->cfg->ops->utils->request_scan))
+ goto unlock;
+
+ priv->cfg->ops->utils->request_scan(priv);
unlock:
mutex_unlock(&priv->mutex);
}
-#define IWL_SCAN_CHECK_WATCHDOG (7 * HZ)
-
void iwl_bg_scan_check(struct work_struct *data)
{
struct iwl_priv *priv =
}
EXPORT_SYMBOL(iwl_fill_probe_req);
-static void iwl_bg_request_scan(struct work_struct *data)
-{
- struct iwl_priv *priv =
- container_of(data, struct iwl_priv, request_scan);
- struct iwl_host_cmd cmd = {
- .id = REPLY_SCAN_CMD,
- .len = sizeof(struct iwl_scan_cmd),
- .flags = CMD_SIZE_HUGE,
- };
- struct iwl_scan_cmd *scan;
- struct ieee80211_conf *conf = NULL;
- u32 rate_flags = 0;
- u16 cmd_len;
- u16 rx_chain = 0;
- enum ieee80211_band band;
- u8 n_probes = 0;
- u8 rx_ant = priv->hw_params.valid_rx_ant;
- u8 rate;
- bool is_active = false;
- int chan_mod;
- u8 active_chains;
-
- conf = ieee80211_get_hw_conf(priv->hw);
-
- mutex_lock(&priv->mutex);
-
- cancel_delayed_work(&priv->scan_check);
-
- if (!iwl_is_ready(priv)) {
- IWL_WARN(priv, "request scan called when driver not ready.\n");
- goto done;
- }
-
- /* Make sure the scan wasn't canceled before this queued work
- * was given the chance to run... */
- if (!test_bit(STATUS_SCANNING, &priv->status))
- goto done;
-
- /* This should never be called or scheduled if there is currently
- * a scan active in the hardware. */
- if (test_bit(STATUS_SCAN_HW, &priv->status)) {
- IWL_DEBUG_INFO(priv, "Multiple concurrent scan requests in parallel. "
- "Ignoring second request.\n");
- goto done;
- }
-
- if (test_bit(STATUS_EXIT_PENDING, &priv->status)) {
- IWL_DEBUG_SCAN(priv, "Aborting scan due to device shutdown\n");
- goto done;
- }
-
- if (test_bit(STATUS_SCAN_ABORTING, &priv->status)) {
- IWL_DEBUG_HC(priv, "Scan request while abort pending. Queuing.\n");
- goto done;
- }
-
- if (iwl_is_rfkill(priv)) {
- IWL_DEBUG_HC(priv, "Aborting scan due to RF Kill activation\n");
- goto done;
- }
-
- if (!test_bit(STATUS_READY, &priv->status)) {
- IWL_DEBUG_HC(priv, "Scan request while uninitialized. Queuing.\n");
- goto done;
- }
-
- if (!priv->scan_cmd) {
- priv->scan_cmd = kmalloc(sizeof(struct iwl_scan_cmd) +
- IWL_MAX_SCAN_SIZE, GFP_KERNEL);
- if (!priv->scan_cmd) {
- IWL_DEBUG_SCAN(priv,
- "fail to allocate memory for scan\n");
- goto done;
- }
- }
- scan = priv->scan_cmd;
- memset(scan, 0, sizeof(struct iwl_scan_cmd) + IWL_MAX_SCAN_SIZE);
-
- scan->quiet_plcp_th = IWL_PLCP_QUIET_THRESH;
- scan->quiet_time = IWL_ACTIVE_QUIET_TIME;
-
- if (iwl_is_associated(priv)) {
- u16 interval = 0;
- u32 extra;
- u32 suspend_time = 100;
- u32 scan_suspend_time = 100;
- unsigned long flags;
-
- IWL_DEBUG_INFO(priv, "Scanning while associated...\n");
- spin_lock_irqsave(&priv->lock, flags);
- interval = priv->beacon_int;
- spin_unlock_irqrestore(&priv->lock, flags);
-
- scan->suspend_time = 0;
- scan->max_out_time = cpu_to_le32(200 * 1024);
- if (!interval)
- interval = suspend_time;
-
- extra = (suspend_time / interval) << 22;
- scan_suspend_time = (extra |
- ((suspend_time % interval) * 1024));
- scan->suspend_time = cpu_to_le32(scan_suspend_time);
- IWL_DEBUG_SCAN(priv, "suspend_time 0x%X beacon interval %d\n",
- scan_suspend_time, interval);
- }
-
- if (priv->is_internal_short_scan) {
- IWL_DEBUG_SCAN(priv, "Start internal passive scan.\n");
- } else if (priv->scan_request->n_ssids) {
- int i, p = 0;
- IWL_DEBUG_SCAN(priv, "Kicking off active scan\n");
- for (i = 0; i < priv->scan_request->n_ssids; i++) {
- /* always does wildcard anyway */
- if (!priv->scan_request->ssids[i].ssid_len)
- continue;
- scan->direct_scan[p].id = WLAN_EID_SSID;
- scan->direct_scan[p].len =
- priv->scan_request->ssids[i].ssid_len;
- memcpy(scan->direct_scan[p].ssid,
- priv->scan_request->ssids[i].ssid,
- priv->scan_request->ssids[i].ssid_len);
- n_probes++;
- p++;
- }
- is_active = true;
- } else
- IWL_DEBUG_SCAN(priv, "Start passive scan.\n");
-
- scan->tx_cmd.tx_flags = TX_CMD_FLG_SEQ_CTL_MSK;
- scan->tx_cmd.sta_id = priv->hw_params.bcast_sta_id;
- scan->tx_cmd.stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE;
-
- switch (priv->scan_band) {
- case IEEE80211_BAND_2GHZ:
- scan->flags = RXON_FLG_BAND_24G_MSK | RXON_FLG_AUTO_DETECT_MSK;
- chan_mod = le32_to_cpu(priv->active_rxon.flags & RXON_FLG_CHANNEL_MODE_MSK)
- >> RXON_FLG_CHANNEL_MODE_POS;
- if (chan_mod == CHANNEL_MODE_PURE_40) {
- rate = IWL_RATE_6M_PLCP;
- } else {
- rate = IWL_RATE_1M_PLCP;
- rate_flags = RATE_MCS_CCK_MSK;
- }
- scan->good_CRC_th = 0;
- break;
- case IEEE80211_BAND_5GHZ:
- rate = IWL_RATE_6M_PLCP;
- /*
- * If active scaning is requested but a certain channel
- * is marked passive, we can do active scanning if we
- * detect transmissions.
- */
- scan->good_CRC_th = is_active ? IWL_GOOD_CRC_TH : 0;
-
- /* Force use of chains B and C (0x6) for scan Rx
- * Avoid A (0x1) for the device has off-channel reception
- * on A-band.
- */
- if (priv->cfg->off_channel_workaround)
- rx_ant = ANT_BC;
- break;
- default:
- IWL_WARN(priv, "Invalid scan band count\n");
- goto done;
- }
-
- band = priv->scan_band;
-
- priv->scan_tx_ant[band] =
- iwl_toggle_tx_ant(priv, priv->scan_tx_ant[band]);
- rate_flags |= iwl_ant_idx_to_flags(priv->scan_tx_ant[band]);
- scan->tx_cmd.rate_n_flags = iwl_hw_set_rate_n_flags(rate, rate_flags);
-
- /* In power save mode use one chain, otherwise use all chains */
- if (test_bit(STATUS_POWER_PMI, &priv->status)) {
- /* rx_ant has been set to all valid chains previously */
- active_chains = rx_ant &
- ((u8)(priv->chain_noise_data.active_chains));
- if (!active_chains)
- active_chains = rx_ant;
-
- IWL_DEBUG_SCAN(priv, "chain_noise_data.active_chains: %u\n",
- priv->chain_noise_data.active_chains);
-
- rx_ant = first_antenna(active_chains);
- }
- /* MIMO is not used here, but value is required */
- rx_chain |= priv->hw_params.valid_rx_ant << RXON_RX_CHAIN_VALID_POS;
- rx_chain |= rx_ant << RXON_RX_CHAIN_FORCE_MIMO_SEL_POS;
- rx_chain |= rx_ant << RXON_RX_CHAIN_FORCE_SEL_POS;
- rx_chain |= 0x1 << RXON_RX_CHAIN_DRIVER_FORCE_POS;
- scan->rx_chain = cpu_to_le16(rx_chain);
- if (!priv->is_internal_short_scan) {
- cmd_len = iwl_fill_probe_req(priv,
- (struct ieee80211_mgmt *)scan->data,
- priv->scan_request->ie,
- priv->scan_request->ie_len,
- IWL_MAX_SCAN_SIZE - sizeof(*scan));
- } else {
- cmd_len = iwl_fill_probe_req(priv,
- (struct ieee80211_mgmt *)scan->data,
- NULL, 0,
- IWL_MAX_SCAN_SIZE - sizeof(*scan));
-
- }
- scan->tx_cmd.len = cpu_to_le16(cmd_len);
- if (iwl_is_monitor_mode(priv))
- scan->filter_flags = RXON_FILTER_PROMISC_MSK;
-
- scan->filter_flags |= (RXON_FILTER_ACCEPT_GRP_MSK |
- RXON_FILTER_BCON_AWARE_MSK);
-
- if (priv->is_internal_short_scan) {
- scan->channel_count =
- iwl_get_single_channel_for_scan(priv, band,
- (void *)&scan->data[le16_to_cpu(
- scan->tx_cmd.len)]);
- } else {
- scan->channel_count =
- iwl_get_channels_for_scan(priv, band,
- is_active, n_probes,
- (void *)&scan->data[le16_to_cpu(
- scan->tx_cmd.len)]);
- }
- if (scan->channel_count == 0) {
- IWL_DEBUG_SCAN(priv, "channel count %d\n", scan->channel_count);
- goto done;
- }
-
- cmd.len += le16_to_cpu(scan->tx_cmd.len) +
- scan->channel_count * sizeof(struct iwl_scan_channel);
- cmd.data = scan;
- scan->len = cpu_to_le16(cmd.len);
-
- set_bit(STATUS_SCAN_HW, &priv->status);
- if (iwl_send_cmd_sync(priv, &cmd))
- goto done;
-
- queue_delayed_work(priv->workqueue, &priv->scan_check,
- IWL_SCAN_CHECK_WATCHDOG);
-
- mutex_unlock(&priv->mutex);
- return;
-
- done:
- /* Cannot perform scan. Make sure we clear scanning
- * bits from status so next scan request can be performed.
- * If we don't clear scanning status bit here all next scan
- * will fail
- */
- clear_bit(STATUS_SCAN_HW, &priv->status);
- clear_bit(STATUS_SCANNING, &priv->status);
- /* inform mac80211 scan aborted */
- queue_work(priv->workqueue, &priv->scan_completed);
- mutex_unlock(&priv->mutex);
-}
-
void iwl_bg_abort_scan(struct work_struct *work)
{
struct iwl_priv *priv = container_of(work, struct iwl_priv, abort_scan);
void iwl_setup_scan_deferred_work(struct iwl_priv *priv)
{
INIT_WORK(&priv->scan_completed, iwl_bg_scan_completed);
- INIT_WORK(&priv->request_scan, iwl_bg_request_scan);
INIT_WORK(&priv->abort_scan, iwl_bg_abort_scan);
INIT_WORK(&priv->start_internal_scan, iwl_bg_start_internal_scan);
INIT_DELAYED_WORK(&priv->scan_check, iwl_bg_scan_check);
}
-#define IWL_SCAN_CHECK_WATCHDOG (7 * HZ)
-static void iwl3945_bg_request_scan(struct work_struct *data)
+void iwl3945_request_scan(struct iwl_priv *priv)
{
- struct iwl_priv *priv =
- container_of(data, struct iwl_priv, request_scan);
struct iwl_host_cmd cmd = {
.id = REPLY_SCAN_CMD,
.len = sizeof(struct iwl3945_scan_cmd),
conf = ieee80211_get_hw_conf(priv->hw);
- mutex_lock(&priv->mutex);
-
cancel_delayed_work(&priv->scan_check);
if (!iwl_is_ready(priv)) {
queue_delayed_work(priv->workqueue, &priv->scan_check,
IWL_SCAN_CHECK_WATCHDOG);
- mutex_unlock(&priv->mutex);
return;
done:
/* inform mac80211 scan aborted */
queue_work(priv->workqueue, &priv->scan_completed);
- mutex_unlock(&priv->mutex);
}
static void iwl3945_bg_restart(struct work_struct *data)
INIT_DELAYED_WORK(&priv->alive_start, iwl3945_bg_alive_start);
INIT_DELAYED_WORK(&priv->_3945.rfkill_poll, iwl3945_rfkill_poll);
INIT_WORK(&priv->scan_completed, iwl_bg_scan_completed);
- INIT_WORK(&priv->request_scan, iwl3945_bg_request_scan);
INIT_WORK(&priv->abort_scan, iwl_bg_abort_scan);
INIT_DELAYED_WORK(&priv->scan_check, iwl_bg_scan_check);
git://bbs.cooldavid.org / net-next-2.6.git / commitdiff