--- /dev/null
+/*
+ * Atheros CARL9170 driver
+ *
+ * 802.11 & command trap routines
+ *
+ * Copyright 2008, Johannes Berg <johannes@sipsolutions.net>
+ * Copyright 2009, 2010, Christian Lamparter <chunkeey@googlemail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING. If not, see
+ * http://www.gnu.org/licenses/.
+ *
+ * This file incorporates work covered by the following copyright and
+ * permission notice:
+ * Copyright (c) 2007-2008 Atheros Communications, Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/etherdevice.h>
+#include <linux/crc32.h>
+#include <net/mac80211.h>
+#include "carl9170.h"
+#include "hw.h"
+#include "cmd.h"
+
+static void carl9170_dbg_message(struct ar9170 *ar, const char *buf, u32 len)
+{
+ bool restart = false;
+ enum carl9170_restart_reasons reason = CARL9170_RR_NO_REASON;
+
+ if (len > 3) {
+ if (memcmp(buf, CARL9170_ERR_MAGIC, 3) == 0) {
+ ar->fw.err_counter++;
+ if (ar->fw.err_counter > 3) {
+ restart = true;
+ reason = CARL9170_RR_TOO_MANY_FIRMWARE_ERRORS;
+ }
+ }
+
+ if (memcmp(buf, CARL9170_BUG_MAGIC, 3) == 0) {
+ ar->fw.bug_counter++;
+ restart = true;
+ reason = CARL9170_RR_FATAL_FIRMWARE_ERROR;
+ }
+ }
+
+ wiphy_info(ar->hw->wiphy, "FW: %.*s\n", len, buf);
+
+ if (restart)
+ carl9170_restart(ar, reason);
+}
+
+static void carl9170_handle_ps(struct ar9170 *ar, struct carl9170_rsp *rsp)
+{
+ u32 ps;
+ bool new_ps;
+
+ ps = le32_to_cpu(rsp->psm.state);
+
+ new_ps = (ps & CARL9170_PSM_COUNTER) != CARL9170_PSM_WAKE;
+ if (ar->ps.state != new_ps) {
+ if (!new_ps) {
+ ar->ps.sleep_ms = jiffies_to_msecs(jiffies -
+ ar->ps.last_action);
+ }
+
+ ar->ps.last_action = jiffies;
+
+ ar->ps.state = new_ps;
+ }
+}
+
+static int carl9170_check_sequence(struct ar9170 *ar, unsigned int seq)
+{
+ if (ar->cmd_seq < -1)
+ return 0;
+
+ /*
+ * Initialize Counter
+ */
+ if (ar->cmd_seq < 0)
+ ar->cmd_seq = seq;
+
+ /*
+ * The sequence is strictly monotonic increasing and it never skips!
+ *
+ * Therefore we can safely assume that whenever we received an
+ * unexpected sequence we have lost some valuable data.
+ */
+ if (seq != ar->cmd_seq) {
+ int count;
+
+ count = (seq - ar->cmd_seq) % ar->fw.cmd_bufs;
+
+ wiphy_err(ar->hw->wiphy, "lost %d command responses/traps! "
+ "w:%d g:%d\n", count, ar->cmd_seq, seq);
+
+ carl9170_restart(ar, CARL9170_RR_LOST_RSP);
+ return -EIO;
+ }
+
+ ar->cmd_seq = (ar->cmd_seq + 1) % ar->fw.cmd_bufs;
+ return 0;
+}
+
+static void carl9170_cmd_callback(struct ar9170 *ar, u32 len, void *buffer)
+{
+ /*
+ * Some commands may have a variable response length
+ * and we cannot predict the correct length in advance.
+ * So we only check if we provided enough space for the data.
+ */
+ if (unlikely(ar->readlen != (len - 4))) {
+ dev_warn(&ar->udev->dev, "received invalid command response:"
+ "got %d, instead of %d\n", len - 4, ar->readlen);
+ print_hex_dump_bytes("carl9170 cmd:", DUMP_PREFIX_OFFSET,
+ ar->cmd_buf, (ar->cmd.hdr.len + 4) & 0x3f);
+ print_hex_dump_bytes("carl9170 rsp:", DUMP_PREFIX_OFFSET,
+ buffer, len);
+ /*
+ * Do not complete. The command times out,
+ * and we get a stack trace from there.
+ */
+ carl9170_restart(ar, CARL9170_RR_INVALID_RSP);
+ }
+
+ spin_lock(&ar->cmd_lock);
+ if (ar->readbuf) {
+ if (len >= 4)
+ memcpy(ar->readbuf, buffer + 4, len - 4);
+
+ ar->readbuf = NULL;
+ }
+ complete(&ar->cmd_wait);
+ spin_unlock(&ar->cmd_lock);
+}
+
+void carl9170_handle_command_response(struct ar9170 *ar, void *buf, u32 len)
+{
+ struct carl9170_rsp *cmd = (void *) buf;
+ struct ieee80211_vif *vif;
+
+ if (carl9170_check_sequence(ar, cmd->hdr.seq))
+ return;
+
+ if ((cmd->hdr.cmd & CARL9170_RSP_FLAG) != CARL9170_RSP_FLAG) {
+ if (!(cmd->hdr.cmd & CARL9170_CMD_ASYNC_FLAG))
+ carl9170_cmd_callback(ar, len, buf);
+
+ return;
+ }
+
+ if (unlikely(cmd->hdr.len != (len - 4))) {
+ if (net_ratelimit()) {
+ wiphy_err(ar->hw->wiphy, "FW: received over-/under"
+ "sized event %x (%d, but should be %d).\n",
+ cmd->hdr.cmd, cmd->hdr.len, len - 4);
+
+ print_hex_dump_bytes("dump:", DUMP_PREFIX_NONE,
+ buf, len);
+ }
+
+ return;
+ }
+
+ /* hardware event handlers */
+ switch (cmd->hdr.cmd) {
+ case CARL9170_RSP_PRETBTT:
+ /* pre-TBTT event */
+ rcu_read_lock();
+ vif = carl9170_get_main_vif(ar);
+
+ if (!vif) {
+ rcu_read_unlock();
+ break;
+ }
+
+ switch (vif->type) {
+ case NL80211_IFTYPE_STATION:
+ carl9170_handle_ps(ar, cmd);
+ break;
+
+ case NL80211_IFTYPE_AP:
+ case NL80211_IFTYPE_ADHOC:
+ carl9170_update_beacon(ar, true);
+ break;
+
+ default:
+ break;
+ }
+ rcu_read_unlock();
+
+ break;
+
+
+ case CARL9170_RSP_TXCOMP:
+ /* TX status notification */
+ carl9170_tx_process_status(ar, cmd);
+ break;
+
+ case CARL9170_RSP_BEACON_CONFIG:
+ /*
+ * (IBSS) beacon send notification
+ * bytes: 04 c2 XX YY B4 B3 B2 B1
+ *
+ * XX always 80
+ * YY always 00
+ * B1-B4 "should" be the number of send out beacons.
+ */
+ break;
+
+ case CARL9170_RSP_ATIM:
+ /* End of Atim Window */
+ break;
+
+ case CARL9170_RSP_WATCHDOG:
+ /* Watchdog Interrupt */
+ carl9170_restart(ar, CARL9170_RR_WATCHDOG);
+ break;
+
+ case CARL9170_RSP_TEXT:
+ /* firmware debug */
+ carl9170_dbg_message(ar, (char *)buf + 4, len - 4);
+ break;
+
+ case CARL9170_RSP_HEXDUMP:
+ wiphy_dbg(ar->hw->wiphy, "FW: HD %d\n", len - 4);
+ print_hex_dump_bytes("FW:", DUMP_PREFIX_NONE,
+ (char *)buf + 4, len - 4);
+ break;
+
+ case CARL9170_RSP_RADAR:
+ if (!net_ratelimit())
+ break;
+
+ wiphy_info(ar->hw->wiphy, "FW: RADAR! Please report this "
+ "incident to linux-wireless@vger.kernel.org !\n");
+ break;
+
+ case CARL9170_RSP_GPIO:
+#ifdef CONFIG_CARL9170_WPC
+ if (ar->wps.pbc) {
+ bool state = !!(cmd->gpio.gpio & cpu_to_le32(
+ AR9170_GPIO_PORT_WPS_BUTTON_PRESSED));
+
+ if (state != ar->wps.pbc_state) {
+ ar->wps.pbc_state = state;
+ input_report_key(ar->wps.pbc, KEY_WPS_BUTTON,
+ state);
+ input_sync(ar->wps.pbc);
+ }
+ }
+#endif /* CONFIG_CARL9170_WPC */
+ break;
+
+ case CARL9170_RSP_BOOT:
+ complete(&ar->fw_boot_wait);
+ break;
+
+ default:
+ wiphy_err(ar->hw->wiphy, "FW: received unhandled event %x\n",
+ cmd->hdr.cmd);
+ print_hex_dump_bytes("dump:", DUMP_PREFIX_NONE, buf, len);
+ break;
+ }
+}
+
+static int carl9170_rx_mac_status(struct ar9170 *ar,
+ struct ar9170_rx_head *head, struct ar9170_rx_macstatus *mac,
+ struct ieee80211_rx_status *status)
+{
+ struct ieee80211_channel *chan;
+ u8 error, decrypt;
+
+ BUILD_BUG_ON(sizeof(struct ar9170_rx_head) != 12);
+ BUILD_BUG_ON(sizeof(struct ar9170_rx_macstatus) != 4);
+
+ error = mac->error;
+
+ if (error & AR9170_RX_ERROR_WRONG_RA) {
+ if (!ar->sniffer_enabled)
+ return -EINVAL;
+ }
+
+ if (error & AR9170_RX_ERROR_PLCP) {
+ if (!(ar->filter_state & FIF_PLCPFAIL))
+ return -EINVAL;
+
+ status->flag |= RX_FLAG_FAILED_PLCP_CRC;
+ }
+
+ if (error & AR9170_RX_ERROR_FCS) {
+ ar->tx_fcs_errors++;
+
+ if (!(ar->filter_state & FIF_FCSFAIL))
+ return -EINVAL;
+
+ status->flag |= RX_FLAG_FAILED_FCS_CRC;
+ }
+
+ decrypt = ar9170_get_decrypt_type(mac);
+ if (!(decrypt & AR9170_RX_ENC_SOFTWARE) &&
+ decrypt != AR9170_ENC_ALG_NONE) {
+ if ((decrypt == AR9170_ENC_ALG_TKIP) &&
+ (error & AR9170_RX_ERROR_MMIC))
+ status->flag |= RX_FLAG_MMIC_ERROR;
+
+ status->flag |= RX_FLAG_DECRYPTED;
+ }
+
+ if (error & AR9170_RX_ERROR_DECRYPT && !ar->sniffer_enabled)
+ return -ENODATA;
+
+ error &= ~(AR9170_RX_ERROR_MMIC |
+ AR9170_RX_ERROR_FCS |
+ AR9170_RX_ERROR_WRONG_RA |
+ AR9170_RX_ERROR_DECRYPT |
+ AR9170_RX_ERROR_PLCP);
+
+ /* drop any other error frames */
+ if (unlikely(error)) {
+ /* TODO: update netdevice's RX dropped/errors statistics */
+
+ if (net_ratelimit())
+ wiphy_dbg(ar->hw->wiphy, "received frame with "
+ "suspicious error code (%#x).\n", error);
+
+ return -EINVAL;
+ }
+
+ chan = ar->channel;
+ if (chan) {
+ status->band = chan->band;
+ status->freq = chan->center_freq;
+ }
+
+ switch (mac->status & AR9170_RX_STATUS_MODULATION) {
+ case AR9170_RX_STATUS_MODULATION_CCK:
+ if (mac->status & AR9170_RX_STATUS_SHORT_PREAMBLE)
+ status->flag |= RX_FLAG_SHORTPRE;
+ switch (head->plcp[0]) {
+ case AR9170_RX_PHY_RATE_CCK_1M:
+ status->rate_idx = 0;
+ break;
+ case AR9170_RX_PHY_RATE_CCK_2M:
+ status->rate_idx = 1;
+ break;
+ case AR9170_RX_PHY_RATE_CCK_5M:
+ status->rate_idx = 2;
+ break;
+ case AR9170_RX_PHY_RATE_CCK_11M:
+ status->rate_idx = 3;
+ break;
+ default:
+ if (net_ratelimit()) {
+ wiphy_err(ar->hw->wiphy, "invalid plcp cck "
+ "rate (%x).\n", head->plcp[0]);
+ }
+
+ return -EINVAL;
+ }
+ break;
+
+ case AR9170_RX_STATUS_MODULATION_DUPOFDM:
+ case AR9170_RX_STATUS_MODULATION_OFDM:
+ switch (head->plcp[0] & 0xf) {
+ case AR9170_TXRX_PHY_RATE_OFDM_6M:
+ status->rate_idx = 0;
+ break;
+ case AR9170_TXRX_PHY_RATE_OFDM_9M:
+ status->rate_idx = 1;
+ break;
+ case AR9170_TXRX_PHY_RATE_OFDM_12M:
+ status->rate_idx = 2;
+ break;
+ case AR9170_TXRX_PHY_RATE_OFDM_18M:
+ status->rate_idx = 3;
+ break;
+ case AR9170_TXRX_PHY_RATE_OFDM_24M:
+ status->rate_idx = 4;
+ break;
+ case AR9170_TXRX_PHY_RATE_OFDM_36M:
+ status->rate_idx = 5;
+ break;
+ case AR9170_TXRX_PHY_RATE_OFDM_48M:
+ status->rate_idx = 6;
+ break;
+ case AR9170_TXRX_PHY_RATE_OFDM_54M:
+ status->rate_idx = 7;
+ break;
+ default:
+ if (net_ratelimit()) {
+ wiphy_err(ar->hw->wiphy, "invalid plcp ofdm "
+ "rate (%x).\n", head->plcp[0]);
+ }
+
+ return -EINVAL;
+ }
+ if (status->band == IEEE80211_BAND_2GHZ)
+ status->rate_idx += 4;
+ break;
+
+ case AR9170_RX_STATUS_MODULATION_HT:
+ if (head->plcp[3] & 0x80)
+ status->flag |= RX_FLAG_40MHZ;
+ if (head->plcp[6] & 0x80)
+ status->flag |= RX_FLAG_SHORT_GI;
+
+ status->rate_idx = clamp(0, 75, head->plcp[3] & 0x7f);
+ status->flag |= RX_FLAG_HT;
+ break;
+
+ default:
+ BUG();
+ return -ENOSYS;
+ }
+
+ return 0;
+}
+
+static void carl9170_rx_phy_status(struct ar9170 *ar,
+ struct ar9170_rx_phystatus *phy, struct ieee80211_rx_status *status)
+{
+ int i;
+
+ BUILD_BUG_ON(sizeof(struct ar9170_rx_phystatus) != 20);
+
+ for (i = 0; i < 3; i++)
+ if (phy->rssi[i] != 0x80)
+ status->antenna |= BIT(i);
+
+ /* post-process RSSI */
+ for (i = 0; i < 7; i++)
+ if (phy->rssi[i] & 0x80)
+ phy->rssi[i] = ((phy->rssi[i] & 0x7f) + 1) & 0x7f;
+
+ /* TODO: we could do something with phy_errors */
+ status->signal = ar->noise[0] + phy->rssi_combined;
+}
+
+static struct sk_buff *carl9170_rx_copy_data(u8 *buf, int len)
+{
+ struct sk_buff *skb;
+ int reserved = 0;
+ struct ieee80211_hdr *hdr = (void *) buf;
+
+ if (ieee80211_is_data_qos(hdr->frame_control)) {
+ u8 *qc = ieee80211_get_qos_ctl(hdr);
+ reserved += NET_IP_ALIGN;
+
+ if (*qc & IEEE80211_QOS_CONTROL_A_MSDU_PRESENT)
+ reserved += NET_IP_ALIGN;
+ }
+
+ if (ieee80211_has_a4(hdr->frame_control))
+ reserved += NET_IP_ALIGN;
+
+ reserved = 32 + (reserved & NET_IP_ALIGN);
+
+ skb = dev_alloc_skb(len + reserved);
+ if (likely(skb)) {
+ skb_reserve(skb, reserved);
+ memcpy(skb_put(skb, len), buf, len);
+ }
+
+ return skb;
+}
+
+static u8 *carl9170_find_ie(u8 *data, unsigned int len, u8 ie)
+{
+ struct ieee80211_mgmt *mgmt = (void *)data;
+ u8 *pos, *end;
+
+ pos = (u8 *)mgmt->u.beacon.variable;
+ end = data + len;
+ while (pos < end) {
+ if (pos + 2 + pos[1] > end)
+ return NULL;
+
+ if (pos[0] == ie)
+ return pos;
+
+ pos += 2 + pos[1];
+ }
+ return NULL;
+}
+
+/*
+ * NOTE:
+ *
+ * The firmware is in charge of waking up the device just before
+ * the AP is expected to transmit the next beacon.
+ *
+ * This leaves the driver with the important task of deciding when
+ * to set the PHY back to bed again.
+ */
+static void carl9170_ps_beacon(struct ar9170 *ar, void *data, unsigned int len)
+{
+ struct ieee80211_hdr *hdr = (void *) data;
+ struct ieee80211_tim_ie *tim_ie;
+ u8 *tim;
+ u8 tim_len;
+ bool cam;
+
+ if (likely(!(ar->hw->conf.flags & IEEE80211_CONF_PS)))
+ return;
+
+ /* check if this really is a beacon */
+ if (!ieee80211_is_beacon(hdr->frame_control))
+ return;
+
+ /* min. beacon length + FCS_LEN */
+ if (len <= 40 + FCS_LEN)
+ return;
+
+ /* and only beacons from the associated BSSID, please */
+ if (compare_ether_addr(hdr->addr3, ar->common.curbssid) ||
+ !ar->common.curaid)
+ return;
+
+ ar->ps.last_beacon = jiffies;
+
+ tim = carl9170_find_ie(data, len - FCS_LEN, WLAN_EID_TIM);
+ if (!tim)
+ return;
+
+ if (tim[1] < sizeof(*tim_ie))
+ return;
+
+ tim_len = tim[1];
+ tim_ie = (struct ieee80211_tim_ie *) &tim[2];
+
+ if (!WARN_ON_ONCE(!ar->hw->conf.ps_dtim_period))
+ ar->ps.dtim_counter = (tim_ie->dtim_count - 1) %
+ ar->hw->conf.ps_dtim_period;
+
+ /* Check whenever the PHY can be turned off again. */
+
+ /* 1. What about buffered unicast traffic for our AID? */
+ cam = ieee80211_check_tim(tim_ie, tim_len, ar->common.curaid);
+
+ /* 2. Maybe the AP wants to send multicast/broadcast data? */
+ cam = !!(tim_ie->bitmap_ctrl & 0x01);
+
+ if (!cam) {
+ /* back to low-power land. */
+ ar->ps.off_override &= ~PS_OFF_BCN;
+ carl9170_ps_check(ar);
+ } else {
+ /* force CAM */
+ ar->ps.off_override |= PS_OFF_BCN;
+ }
+}
+
+/*
+ * If the frame alignment is right (or the kernel has
+ * CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS), and there
+ * is only a single MPDU in the USB frame, then we could
+ * submit to mac80211 the SKB directly. However, since
+ * there may be multiple packets in one SKB in stream
+ * mode, and we need to observe the proper ordering,
+ * this is non-trivial.
+ */
+
+static void carl9170_handle_mpdu(struct ar9170 *ar, u8 *buf, int len)
+{
+ struct ar9170_rx_head *head;
+ struct ar9170_rx_macstatus *mac;
+ struct ar9170_rx_phystatus *phy = NULL;
+ struct ieee80211_rx_status status;
+ struct sk_buff *skb;
+ int mpdu_len;
+
+ if (!IS_STARTED(ar))
+ return;
+
+ if (unlikely(len < sizeof(*mac))) {
+ ar->rx_dropped++;
+ return;
+ }
+
+ mpdu_len = len - sizeof(*mac);
+
+ mac = (void *)(buf + mpdu_len);
+ if (unlikely(mac->error & AR9170_RX_ERROR_FATAL)) {
+ ar->rx_dropped++;
+ return;
+ }
+
+ switch (mac->status & AR9170_RX_STATUS_MPDU) {
+ case AR9170_RX_STATUS_MPDU_FIRST:
+ /* Aggregated MPDUs start with an PLCP header */
+ if (likely(mpdu_len >= sizeof(struct ar9170_rx_head))) {
+ head = (void *) buf;
+
+ /*
+ * The PLCP header needs to be cached for the
+ * following MIDDLE + LAST A-MPDU packets.
+ *
+ * So, if you are wondering why all frames seem
+ * to share a common RX status information,
+ * then you have the answer right here...
+ */
+ memcpy(&ar->rx_plcp, (void *) buf,
+ sizeof(struct ar9170_rx_head));
+
+ mpdu_len -= sizeof(struct ar9170_rx_head);
+ buf += sizeof(struct ar9170_rx_head);
+
+ ar->rx_has_plcp = true;
+ } else {
+ if (net_ratelimit()) {
+ wiphy_err(ar->hw->wiphy, "plcp info "
+ "is clipped.\n");
+ }
+
+ ar->rx_dropped++;
+ return;
+ }
+ break;
+
+ case AR9170_RX_STATUS_MPDU_LAST:
+ /*
+ * The last frame of an A-MPDU has an extra tail
+ * which does contain the phy status of the whole
+ * aggregate.
+ */
+
+ if (likely(mpdu_len >= sizeof(struct ar9170_rx_phystatus))) {
+ mpdu_len -= sizeof(struct ar9170_rx_phystatus);
+ phy = (void *)(buf + mpdu_len);
+ } else {
+ if (net_ratelimit()) {
+ wiphy_err(ar->hw->wiphy, "frame tail "
+ "is clipped.\n");
+ }
+
+ ar->rx_dropped++;
+ return;
+ }
+
+ case AR9170_RX_STATUS_MPDU_MIDDLE:
+ /* These are just data + mac status */
+ if (unlikely(!ar->rx_has_plcp)) {
+ if (!net_ratelimit())
+ return;
+
+ wiphy_err(ar->hw->wiphy, "rx stream does not start "
+ "with a first_mpdu frame tag.\n");
+
+ ar->rx_dropped++;
+ return;
+ }
+
+ head = &ar->rx_plcp;
+ break;
+
+ case AR9170_RX_STATUS_MPDU_SINGLE:
+ /* single mpdu has both: plcp (head) and phy status (tail) */
+ head = (void *) buf;
+
+ mpdu_len -= sizeof(struct ar9170_rx_head);
+ mpdu_len -= sizeof(struct ar9170_rx_phystatus);
+
+ buf += sizeof(struct ar9170_rx_head);
+ phy = (void *)(buf + mpdu_len);
+ break;
+
+ default:
+ BUG_ON(1);
+ break;
+ }
+
+ /* FC + DU + RA + FCS */
+ if (unlikely(mpdu_len < (2 + 2 + 6 + FCS_LEN))) {
+ ar->rx_dropped++;
+ return;
+ }
+
+ memset(&status, 0, sizeof(status));
+ if (unlikely(carl9170_rx_mac_status(ar, head, mac, &status))) {
+ ar->rx_dropped++;
+ return;
+ }
+
+ if (phy)
+ carl9170_rx_phy_status(ar, phy, &status);
+
+ carl9170_ps_beacon(ar, buf, mpdu_len);
+
+ skb = carl9170_rx_copy_data(buf, mpdu_len);
+ if (likely(skb)) {
+ memcpy(IEEE80211_SKB_RXCB(skb), &status, sizeof(status));
+ ieee80211_rx(ar->hw, skb);
+ } else {
+ ar->rx_dropped++;
+ }
+}
+
+static void carl9170_rx_untie_cmds(struct ar9170 *ar, const u8 *respbuf,
+ const unsigned int resplen)
+{
+ struct carl9170_rsp *cmd;
+ int i = 0;
+
+ while (i < resplen) {
+ cmd = (void *) &respbuf[i];
+
+ i += cmd->hdr.len + 4;
+ if (unlikely(i > resplen))
+ break;
+
+ carl9170_handle_command_response(ar, cmd, cmd->hdr.len + 4);
+ }
+
+ if (unlikely(i != resplen)) {
+ if (!net_ratelimit())
+ return;
+
+ wiphy_err(ar->hw->wiphy, "malformed firmware trap:\n");
+ print_hex_dump_bytes("rxcmd:", DUMP_PREFIX_OFFSET,
+ respbuf, resplen);
+ }
+}
+
+static void __carl9170_rx(struct ar9170 *ar, u8 *buf, unsigned int len)
+{
+ unsigned int i = 0;
+
+ /* weird thing, but this is the same in the original driver */
+ while (len > 2 && i < 12 && buf[0] == 0xff && buf[1] == 0xff) {
+ i += 2;
+ len -= 2;
+ buf += 2;
+ }
+
+ if (unlikely(len < 4))
+ return;
+
+ /* found the 6 * 0xffff marker? */
+ if (i == 12)
+ carl9170_rx_untie_cmds(ar, buf, len);
+ else
+ carl9170_handle_mpdu(ar, buf, len);
+}
+
+static void carl9170_rx_stream(struct ar9170 *ar, void *buf, unsigned int len)
+{
+ unsigned int tlen, wlen = 0, clen = 0;
+ struct ar9170_stream *rx_stream;
+ u8 *tbuf;
+
+ tbuf = buf;
+ tlen = len;
+
+ while (tlen >= 4) {
+ rx_stream = (void *) tbuf;
+ clen = le16_to_cpu(rx_stream->length);
+ wlen = ALIGN(clen, 4);
+
+ /* check if this is stream has a valid tag.*/
+ if (rx_stream->tag != cpu_to_le16(AR9170_RX_STREAM_TAG)) {
+ /*
+ * TODO: handle the highly unlikely event that the
+ * corrupted stream has the TAG at the right position.
+ */
+
+ /* check if the frame can be repaired. */
+ if (!ar->rx_failover_missing) {
+
+ /* this is not "short read". */
+ if (net_ratelimit()) {
+ wiphy_err(ar->hw->wiphy,
+ "missing tag!\n");
+ }
+
+ __carl9170_rx(ar, tbuf, tlen);
+ return;
+ }
+
+ if (ar->rx_failover_missing > tlen) {
+ if (net_ratelimit()) {
+ wiphy_err(ar->hw->wiphy,
+ "possible multi "
+ "stream corruption!\n");
+ goto err_telluser;
+ } else {
+ goto err_silent;
+ }
+ }
+
+ memcpy(skb_put(ar->rx_failover, tlen), tbuf, tlen);
+ ar->rx_failover_missing -= tlen;
+
+ if (ar->rx_failover_missing <= 0) {
+ /*
+ * nested carl9170_rx_stream call!
+ *
+ * termination is guranteed, even when the
+ * combined frame also have an element with
+ * a bad tag.
+ */
+
+ ar->rx_failover_missing = 0;
+ carl9170_rx_stream(ar, ar->rx_failover->data,
+ ar->rx_failover->len);
+
+ skb_reset_tail_pointer(ar->rx_failover);
+ skb_trim(ar->rx_failover, 0);
+ }
+
+ return;
+ }
+
+ /* check if stream is clipped */
+ if (wlen > tlen - 4) {
+ if (ar->rx_failover_missing) {
+ /* TODO: handle double stream corruption. */
+ if (net_ratelimit()) {
+ wiphy_err(ar->hw->wiphy, "double rx "
+ "stream corruption!\n");
+ goto err_telluser;
+ } else {
+ goto err_silent;
+ }
+ }
+
+ /*
+ * save incomplete data set.
+ * the firmware will resend the missing bits when
+ * the rx - descriptor comes round again.
+ */
+
+ memcpy(skb_put(ar->rx_failover, tlen), tbuf, tlen);
+ ar->rx_failover_missing = clen - tlen;
+ return;
+ }
+ __carl9170_rx(ar, rx_stream->payload, clen);
+
+ tbuf += wlen + 4;
+ tlen -= wlen + 4;
+ }
+
+ if (tlen) {
+ if (net_ratelimit()) {
+ wiphy_err(ar->hw->wiphy, "%d bytes of unprocessed "
+ "data left in rx stream!\n", tlen);
+ }
+
+ goto err_telluser;
+ }
+
+ return;
+
+err_telluser:
+ wiphy_err(ar->hw->wiphy, "damaged RX stream data [want:%d, "
+ "data:%d, rx:%d, pending:%d ]\n", clen, wlen, tlen,
+ ar->rx_failover_missing);
+
+ if (ar->rx_failover_missing)
+ print_hex_dump_bytes("rxbuf:", DUMP_PREFIX_OFFSET,
+ ar->rx_failover->data,
+ ar->rx_failover->len);
+
+ print_hex_dump_bytes("stream:", DUMP_PREFIX_OFFSET,
+ buf, len);
+
+ wiphy_err(ar->hw->wiphy, "please check your hardware and cables, if "
+ "you see this message frequently.\n");
+
+err_silent:
+ if (ar->rx_failover_missing) {
+ skb_reset_tail_pointer(ar->rx_failover);
+ skb_trim(ar->rx_failover, 0);
+ ar->rx_failover_missing = 0;
+ }
+}
+
+void carl9170_rx(struct ar9170 *ar, void *buf, unsigned int len)
+{
+ if (ar->fw.rx_stream)
+ carl9170_rx_stream(ar, buf, len);
+ else
+ __carl9170_rx(ar, buf, len);
+}
--- /dev/null
+/*
+ * Atheros CARL9170 driver
+ *
+ * 802.11 xmit & status routines
+ *
+ * Copyright 2008, Johannes Berg <johannes@sipsolutions.net>
+ * Copyright 2009, 2010, Christian Lamparter <chunkeey@googlemail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING. If not, see
+ * http://www.gnu.org/licenses/.
+ *
+ * This file incorporates work covered by the following copyright and
+ * permission notice:
+ * Copyright (c) 2007-2008 Atheros Communications, Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/etherdevice.h>
+#include <net/mac80211.h>
+#include "carl9170.h"
+#include "hw.h"
+#include "cmd.h"
+
+static inline unsigned int __carl9170_get_queue(struct ar9170 *ar,
+ unsigned int queue)
+{
+ if (unlikely(modparam_noht)) {
+ return queue;
+ } else {
+ /*
+ * This is just another workaround, until
+ * someone figures out how to get QoS and
+ * AMPDU to play nicely together.
+ */
+
+ return 2; /* AC_BE */
+ }
+}
+
+static inline unsigned int carl9170_get_queue(struct ar9170 *ar,
+ struct sk_buff *skb)
+{
+ return __carl9170_get_queue(ar, skb_get_queue_mapping(skb));
+}
+
+static bool is_mem_full(struct ar9170 *ar)
+{
+ return (DIV_ROUND_UP(IEEE80211_MAX_FRAME_LEN, ar->fw.mem_block_size) >
+ atomic_read(&ar->mem_free_blocks));
+}
+
+static void carl9170_tx_accounting(struct ar9170 *ar, struct sk_buff *skb)
+{
+ int queue, i;
+ bool mem_full;
+
+ atomic_inc(&ar->tx_total_queued);
+
+ queue = skb_get_queue_mapping(skb);
+ spin_lock_bh(&ar->tx_stats_lock);
+
+ /*
+ * The driver has to accept the frame, regardless if the queue is
+ * full to the brim, or not. We have to do the queuing internally,
+ * since mac80211 assumes that a driver which can operate with
+ * aggregated frames does not reject frames for this reason.
+ */
+ ar->tx_stats[queue].len++;
+ ar->tx_stats[queue].count++;
+
+ mem_full = is_mem_full(ar);
+ for (i = 0; i < ar->hw->queues; i++) {
+ if (mem_full || ar->tx_stats[i].len >= ar->tx_stats[i].limit) {
+ ieee80211_stop_queue(ar->hw, i);
+ ar->queue_stop_timeout[i] = jiffies;
+ }
+ }
+
+ spin_unlock_bh(&ar->tx_stats_lock);
+}
+
+static void carl9170_tx_accounting_free(struct ar9170 *ar, struct sk_buff *skb)
+{
+ struct ieee80211_tx_info *txinfo;
+ int queue;
+
+ txinfo = IEEE80211_SKB_CB(skb);
+ queue = skb_get_queue_mapping(skb);
+
+ spin_lock_bh(&ar->tx_stats_lock);
+
+ ar->tx_stats[queue].len--;
+
+ if (!is_mem_full(ar)) {
+ unsigned int i;
+ for (i = 0; i < ar->hw->queues; i++) {
+ if (ar->tx_stats[i].len >= CARL9170_NUM_TX_LIMIT_SOFT)
+ continue;
+
+ if (ieee80211_queue_stopped(ar->hw, i)) {
+ unsigned long tmp;
+
+ tmp = jiffies - ar->queue_stop_timeout[i];
+ if (tmp > ar->max_queue_stop_timeout[i])
+ ar->max_queue_stop_timeout[i] = tmp;
+ }
+
+ ieee80211_wake_queue(ar->hw, i);
+ }
+ }
+
+ spin_unlock_bh(&ar->tx_stats_lock);
+ if (atomic_dec_and_test(&ar->tx_total_queued))
+ complete(&ar->tx_flush);
+}
+
+static int carl9170_alloc_dev_space(struct ar9170 *ar, struct sk_buff *skb)
+{
+ struct _carl9170_tx_superframe *super = (void *) skb->data;
+ unsigned int chunks;
+ int cookie = -1;
+
+ atomic_inc(&ar->mem_allocs);
+
+ chunks = DIV_ROUND_UP(skb->len, ar->fw.mem_block_size);
+ if (unlikely(atomic_sub_return(chunks, &ar->mem_free_blocks) < 0)) {
+ atomic_add(chunks, &ar->mem_free_blocks);
+ return -ENOSPC;
+ }
+
+ spin_lock_bh(&ar->mem_lock);
+ cookie = bitmap_find_free_region(ar->mem_bitmap, ar->fw.mem_blocks, 0);
+ spin_unlock_bh(&ar->mem_lock);
+
+ if (unlikely(cookie < 0)) {
+ atomic_add(chunks, &ar->mem_free_blocks);
+ return -ENOSPC;
+ }
+
+ super = (void *) skb->data;
+
+ /*
+ * Cookie #0 serves two special purposes:
+ * 1. The firmware might use it generate BlockACK frames
+ * in responds of an incoming BlockAckReqs.
+ *
+ * 2. Prevent double-free bugs.
+ */
+ super->s.cookie = (u8) cookie + 1;
+ return 0;
+}
+
+static void carl9170_release_dev_space(struct ar9170 *ar, struct sk_buff *skb)
+{
+ struct _carl9170_tx_superframe *super = (void *) skb->data;
+ int cookie;
+
+ /* make a local copy of the cookie */
+ cookie = super->s.cookie;
+ /* invalidate cookie */
+ super->s.cookie = 0;
+
+ /*
+ * Do a out-of-bounds check on the cookie:
+ *
+ * * cookie "0" is reserved and won't be assigned to any
+ * out-going frame. Internally however, it is used to
+ * mark no longer/un-accounted frames and serves as a
+ * cheap way of preventing frames from being freed
+ * twice by _accident_. NB: There is a tiny race...
+ *
+ * * obviously, cookie number is limited by the amount
+ * of available memory blocks, so the number can
+ * never execeed the mem_blocks count.
+ */
+ if (unlikely(WARN_ON_ONCE(cookie == 0) ||
+ WARN_ON_ONCE(cookie > ar->fw.mem_blocks)))
+ return;
+
+ atomic_add(DIV_ROUND_UP(skb->len, ar->fw.mem_block_size),
+ &ar->mem_free_blocks);
+
+ spin_lock_bh(&ar->mem_lock);
+ bitmap_release_region(ar->mem_bitmap, cookie - 1, 0);
+ spin_unlock_bh(&ar->mem_lock);
+}
+
+/* Called from any context */
+static void carl9170_tx_release(struct kref *ref)
+{
+ struct ar9170 *ar;
+ struct carl9170_tx_info *arinfo;
+ struct ieee80211_tx_info *txinfo;
+ struct sk_buff *skb;
+
+ arinfo = container_of(ref, struct carl9170_tx_info, ref);
+ txinfo = container_of((void *) arinfo, struct ieee80211_tx_info,
+ rate_driver_data);
+ skb = container_of((void *) txinfo, struct sk_buff, cb);
+
+ ar = arinfo->ar;
+ if (WARN_ON_ONCE(!ar))
+ return;
+
+ BUILD_BUG_ON(
+ offsetof(struct ieee80211_tx_info, status.ampdu_ack_len) != 23);
+
+ memset(&txinfo->status.ampdu_ack_len, 0,
+ sizeof(struct ieee80211_tx_info) -
+ offsetof(struct ieee80211_tx_info, status.ampdu_ack_len));
+
+ if (atomic_read(&ar->tx_total_queued))
+ ar->tx_schedule = true;
+
+ if (txinfo->flags & IEEE80211_TX_CTL_AMPDU) {
+ if (!atomic_read(&ar->tx_ampdu_upload))
+ ar->tx_ampdu_schedule = true;
+
+ if (txinfo->flags & IEEE80211_TX_STAT_AMPDU) {
+ txinfo->status.ampdu_len = txinfo->pad[0];
+ txinfo->status.ampdu_ack_len = txinfo->pad[1];
+ txinfo->pad[0] = txinfo->pad[1] = 0;
+ } else if (txinfo->flags & IEEE80211_TX_STAT_ACK) {
+ /*
+ * drop redundant tx_status reports:
+ *
+ * 1. ampdu_ack_len of the final tx_status does
+ * include the feedback of this particular frame.
+ *
+ * 2. tx_status_irqsafe only queues up to 128
+ * tx feedback reports and discards the rest.
+ *
+ * 3. minstrel_ht is picky, it only accepts
+ * reports of frames with the TX_STATUS_AMPDU flag.
+ */
+
+ dev_kfree_skb_any(skb);
+ return;
+ } else {
+ /*
+ * Frame has failed, but we want to keep it in
+ * case it was lost due to a power-state
+ * transition.
+ */
+ }
+ }
+
+ skb_pull(skb, sizeof(struct _carl9170_tx_superframe));
+ ieee80211_tx_status_irqsafe(ar->hw, skb);
+}
+
+void carl9170_tx_get_skb(struct sk_buff *skb)
+{
+ struct carl9170_tx_info *arinfo = (void *)
+ (IEEE80211_SKB_CB(skb))->rate_driver_data;
+ kref_get(&arinfo->ref);
+}
+
+int carl9170_tx_put_skb(struct sk_buff *skb)
+{
+ struct carl9170_tx_info *arinfo = (void *)
+ (IEEE80211_SKB_CB(skb))->rate_driver_data;
+
+ return kref_put(&arinfo->ref, carl9170_tx_release);
+}
+
+/* Caller must hold the tid_info->lock & rcu_read_lock */
+static void carl9170_tx_shift_bm(struct ar9170 *ar,
+ struct carl9170_sta_tid *tid_info, u16 seq)
+{
+ u16 off;
+
+ off = SEQ_DIFF(seq, tid_info->bsn);
+
+ if (WARN_ON_ONCE(off >= CARL9170_BAW_BITS))
+ return;
+
+ /*
+ * Sanity check. For each MPDU we set the bit in bitmap and
+ * clear it once we received the tx_status.
+ * But if the bit is already cleared then we've been bitten
+ * by a bug.
+ */
+ WARN_ON_ONCE(!test_and_clear_bit(off, tid_info->bitmap));
+
+ off = SEQ_DIFF(tid_info->snx, tid_info->bsn);
+ if (WARN_ON_ONCE(off >= CARL9170_BAW_BITS))
+ return;
+
+ if (!bitmap_empty(tid_info->bitmap, off))
+ off = find_first_bit(tid_info->bitmap, off);
+
+ tid_info->bsn += off;
+ tid_info->bsn &= 0x0fff;
+
+ bitmap_shift_right(tid_info->bitmap, tid_info->bitmap,
+ off, CARL9170_BAW_BITS);
+}
+
+static void carl9170_tx_status_process_ampdu(struct ar9170 *ar,
+ struct sk_buff *skb, struct ieee80211_tx_info *txinfo)
+{
+ struct _carl9170_tx_superframe *super = (void *) skb->data;
+ struct ieee80211_hdr *hdr = (void *) super->frame_data;
+ struct ieee80211_tx_info *tx_info;
+ struct carl9170_tx_info *ar_info;
+ struct carl9170_sta_info *sta_info;
+ struct ieee80211_sta *sta;
+ struct carl9170_sta_tid *tid_info;
+ struct ieee80211_vif *vif;
+ unsigned int vif_id;
+ u8 tid;
+
+ if (!(txinfo->flags & IEEE80211_TX_CTL_AMPDU) ||
+ txinfo->flags & IEEE80211_TX_CTL_INJECTED)
+ return;
+
+ tx_info = IEEE80211_SKB_CB(skb);
+ ar_info = (void *) tx_info->rate_driver_data;
+
+ vif_id = (super->s.misc & CARL9170_TX_SUPER_MISC_VIF_ID) >>
+ CARL9170_TX_SUPER_MISC_VIF_ID_S;
+
+ if (WARN_ON_ONCE(vif_id >= AR9170_MAX_VIRTUAL_MAC))
+ return;
+
+ rcu_read_lock();
+ vif = rcu_dereference(ar->vif_priv[vif_id].vif);
+ if (unlikely(!vif))
+ goto out_rcu;
+
+ /*
+ * Normally we should use wrappers like ieee80211_get_DA to get
+ * the correct peer ieee80211_sta.
+ *
+ * But there is a problem with indirect traffic (broadcasts, or
+ * data which is designated for other stations) in station mode.
+ * The frame will be directed to the AP for distribution and not
+ * to the actual destination.
+ */
+ sta = ieee80211_find_sta(vif, hdr->addr1);
+ if (unlikely(!sta))
+ goto out_rcu;
+
+ tid = get_tid_h(hdr);
+
+ sta_info = (void *) sta->drv_priv;
+ tid_info = rcu_dereference(sta_info->agg[tid]);
+ if (!tid_info)
+ goto out_rcu;
+
+ spin_lock_bh(&tid_info->lock);
+ if (likely(tid_info->state >= CARL9170_TID_STATE_IDLE))
+ carl9170_tx_shift_bm(ar, tid_info, get_seq_h(hdr));
+
+ if (sta_info->stats[tid].clear) {
+ sta_info->stats[tid].clear = false;
+ sta_info->stats[tid].ampdu_len = 0;
+ sta_info->stats[tid].ampdu_ack_len = 0;
+ }
+
+ sta_info->stats[tid].ampdu_len++;
+ if (txinfo->status.rates[0].count == 1)
+ sta_info->stats[tid].ampdu_ack_len++;
+
+ if (super->f.mac_control & cpu_to_le16(AR9170_TX_MAC_IMM_BA)) {
+ txinfo->pad[0] = sta_info->stats[tid].ampdu_len;
+ txinfo->pad[1] = sta_info->stats[tid].ampdu_ack_len;
+ txinfo->flags |= IEEE80211_TX_STAT_AMPDU;
+ sta_info->stats[tid].clear = true;
+ }
+ spin_unlock_bh(&tid_info->lock);
+
+out_rcu:
+ rcu_read_unlock();
+}
+
+void carl9170_tx_status(struct ar9170 *ar, struct sk_buff *skb,
+ const bool success)
+{
+ struct ieee80211_tx_info *txinfo;
+
+ carl9170_tx_accounting_free(ar, skb);
+
+ txinfo = IEEE80211_SKB_CB(skb);
+
+ if (success)
+ txinfo->flags |= IEEE80211_TX_STAT_ACK;
+ else
+ ar->tx_ack_failures++;
+
+ if (txinfo->flags & IEEE80211_TX_CTL_AMPDU)
+ carl9170_tx_status_process_ampdu(ar, skb, txinfo);
+
+ carl9170_tx_put_skb(skb);
+}
+
+/* This function may be called form any context */
+void carl9170_tx_callback(struct ar9170 *ar, struct sk_buff *skb)
+{
+ struct ieee80211_tx_info *txinfo = IEEE80211_SKB_CB(skb);
+
+ atomic_dec(&ar->tx_total_pending);
+
+ if (txinfo->flags & IEEE80211_TX_CTL_AMPDU)
+ atomic_dec(&ar->tx_ampdu_upload);
+
+ if (carl9170_tx_put_skb(skb))
+ tasklet_hi_schedule(&ar->usb_tasklet);
+}
+
+static struct sk_buff *carl9170_get_queued_skb(struct ar9170 *ar, u8 cookie,
+ struct sk_buff_head *queue)
+{
+ struct sk_buff *skb;
+
+ spin_lock_bh(&queue->lock);
+ skb_queue_walk(queue, skb) {
+ struct _carl9170_tx_superframe *txc = (void *) skb->data;
+
+ if (txc->s.cookie != cookie)
+ continue;
+
+ __skb_unlink(skb, queue);
+ spin_unlock_bh(&queue->lock);
+
+ carl9170_release_dev_space(ar, skb);
+ return skb;
+ }
+ spin_unlock_bh(&queue->lock);
+
+ return NULL;
+}
+
+static void carl9170_tx_fill_rateinfo(struct ar9170 *ar, unsigned int rix,
+ unsigned int tries, struct ieee80211_tx_info *txinfo)
+{
+ unsigned int i;
+
+ for (i = 0; i < IEEE80211_TX_MAX_RATES; i++) {
+ if (txinfo->status.rates[i].idx < 0)
+ break;
+
+ if (i == rix) {
+ txinfo->status.rates[i].count = tries;
+ i++;
+ break;
+ }
+ }
+
+ for (; i < IEEE80211_TX_MAX_RATES; i++) {
+ txinfo->status.rates[i].idx = -1;
+ txinfo->status.rates[i].count = 0;
+ }
+}
+
+static void carl9170_check_queue_stop_timeout(struct ar9170 *ar)
+{
+ int i;
+ struct sk_buff *skb;
+ struct ieee80211_tx_info *txinfo;
+ struct carl9170_tx_info *arinfo;
+ bool restart = false;
+
+ for (i = 0; i < ar->hw->queues; i++) {
+ spin_lock_bh(&ar->tx_status[i].lock);
+
+ skb = skb_peek(&ar->tx_status[i]);
+
+ if (!skb)
+ goto next;
+
+ txinfo = IEEE80211_SKB_CB(skb);
+ arinfo = (void *) txinfo->rate_driver_data;
+
+ if (time_is_before_jiffies(arinfo->timeout +
+ msecs_to_jiffies(CARL9170_QUEUE_STUCK_TIMEOUT)) == true)
+ restart = true;
+
+next:
+ spin_unlock_bh(&ar->tx_status[i].lock);
+ }
+
+ if (restart) {
+ /*
+ * At least one queue has been stuck for long enough.
+ * Give the device a kick and hope it gets back to
+ * work.
+ *
+ * possible reasons may include:
+ * - frames got lost/corrupted (bad connection to the device)
+ * - stalled rx processing/usb controller hiccups
+ * - firmware errors/bugs
+ * - every bug you can think of.
+ * - all bugs you can't...
+ * - ...
+ */
+ carl9170_restart(ar, CARL9170_RR_STUCK_TX);
+ }
+}
+
+void carl9170_tx_janitor(struct work_struct *work)
+{
+ struct ar9170 *ar = container_of(work, struct ar9170,
+ tx_janitor.work);
+ if (!IS_STARTED(ar))
+ return;
+
+ ar->tx_janitor_last_run = jiffies;
+
+ carl9170_check_queue_stop_timeout(ar);
+
+ if (!atomic_read(&ar->tx_total_queued))
+ return;
+
+ ieee80211_queue_delayed_work(ar->hw, &ar->tx_janitor,
+ msecs_to_jiffies(CARL9170_TX_TIMEOUT));
+}
+
+static void __carl9170_tx_process_status(struct ar9170 *ar,
+ const uint8_t cookie, const uint8_t info)
+{
+ struct sk_buff *skb;
+ struct ieee80211_tx_info *txinfo;
+ struct carl9170_tx_info *arinfo;
+ unsigned int r, t, q;
+ bool success = true;
+
+ q = ar9170_qmap[info & CARL9170_TX_STATUS_QUEUE];
+
+ skb = carl9170_get_queued_skb(ar, cookie, &ar->tx_status[q]);
+ if (!skb) {
+ /*
+ * We have lost the race to another thread.
+ */
+
+ return ;
+ }
+
+ txinfo = IEEE80211_SKB_CB(skb);
+ arinfo = (void *) txinfo->rate_driver_data;
+
+ if (!(info & CARL9170_TX_STATUS_SUCCESS))
+ success = false;
+
+ r = (info & CARL9170_TX_STATUS_RIX) >> CARL9170_TX_STATUS_RIX_S;
+ t = (info & CARL9170_TX_STATUS_TRIES) >> CARL9170_TX_STATUS_TRIES_S;
+
+ carl9170_tx_fill_rateinfo(ar, r, t, txinfo);
+ carl9170_tx_status(ar, skb, success);
+}
+
+void carl9170_tx_process_status(struct ar9170 *ar,
+ const struct carl9170_rsp *cmd)
+{
+ unsigned int i;
+
+ for (i = 0; i < cmd->hdr.ext; i++) {
+ if (WARN_ON(i > ((cmd->hdr.len / 2) + 1))) {
+ print_hex_dump_bytes("UU:", DUMP_PREFIX_NONE,
+ (void *) cmd, cmd->hdr.len + 4);
+ break;
+ }
+
+ __carl9170_tx_process_status(ar, cmd->_tx_status[i].cookie,
+ cmd->_tx_status[i].info);
+ }
+}
+
+static __le32 carl9170_tx_physet(struct ar9170 *ar,
+ struct ieee80211_tx_info *info, struct ieee80211_tx_rate *txrate)
+{
+ struct ieee80211_rate *rate = NULL;
+ u32 power, chains;
+ __le32 tmp;
+
+ tmp = cpu_to_le32(0);
+
+ if (txrate->flags & IEEE80211_TX_RC_40_MHZ_WIDTH)
+ tmp |= cpu_to_le32(AR9170_TX_PHY_BW_40MHZ <<
+ AR9170_TX_PHY_BW_S);
+ /* this works because 40 MHz is 2 and dup is 3 */
+ if (txrate->flags & IEEE80211_TX_RC_DUP_DATA)
+ tmp |= cpu_to_le32(AR9170_TX_PHY_BW_40MHZ_DUP <<
+ AR9170_TX_PHY_BW_S);
+
+ if (txrate->flags & IEEE80211_TX_RC_SHORT_GI)
+ tmp |= cpu_to_le32(AR9170_TX_PHY_SHORT_GI);
+
+ if (txrate->flags & IEEE80211_TX_RC_MCS) {
+ u32 r = txrate->idx;
+ u8 *txpower;
+
+ /* heavy clip control */
+ tmp |= cpu_to_le32((r & 0x7) <<
+ AR9170_TX_PHY_TX_HEAVY_CLIP_S);
+
+ if (txrate->flags & IEEE80211_TX_RC_40_MHZ_WIDTH) {
+ if (info->band == IEEE80211_BAND_5GHZ)
+ txpower = ar->power_5G_ht40;
+ else
+ txpower = ar->power_2G_ht40;
+ } else {
+ if (info->band == IEEE80211_BAND_5GHZ)
+ txpower = ar->power_5G_ht20;
+ else
+ txpower = ar->power_2G_ht20;
+ }
+
+ power = txpower[r & 7];
+
+ /* +1 dBm for HT40 */
+ if (txrate->flags & IEEE80211_TX_RC_40_MHZ_WIDTH)
+ power += 2;
+
+ r <<= AR9170_TX_PHY_MCS_S;
+ BUG_ON(r & ~AR9170_TX_PHY_MCS);
+
+ tmp |= cpu_to_le32(r & AR9170_TX_PHY_MCS);
+ tmp |= cpu_to_le32(AR9170_TX_PHY_MOD_HT);
+
+ /*
+ * green field preamble does not work.
+ *
+ * if (txrate->flags & IEEE80211_TX_RC_GREEN_FIELD)
+ * tmp |= cpu_to_le32(AR9170_TX_PHY_GREENFIELD);
+ */
+ } else {
+ u8 *txpower;
+ u32 mod;
+ u32 phyrate;
+ u8 idx = txrate->idx;
+
+ if (info->band != IEEE80211_BAND_2GHZ) {
+ idx += 4;
+ txpower = ar->power_5G_leg;
+ mod = AR9170_TX_PHY_MOD_OFDM;
+ } else {
+ if (idx < 4) {
+ txpower = ar->power_2G_cck;
+ mod = AR9170_TX_PHY_MOD_CCK;
+ } else {
+ mod = AR9170_TX_PHY_MOD_OFDM;
+ txpower = ar->power_2G_ofdm;
+ }
+ }
+
+ rate = &__carl9170_ratetable[idx];
+
+ phyrate = rate->hw_value & 0xF;
+ power = txpower[(rate->hw_value & 0x30) >> 4];
+ phyrate <<= AR9170_TX_PHY_MCS_S;
+
+ tmp |= cpu_to_le32(mod);
+ tmp |= cpu_to_le32(phyrate);
+
+ /*
+ * short preamble seems to be broken too.
+ *
+ * if (txrate->flags & IEEE80211_TX_RC_USE_SHORT_PREAMBLE)
+ * tmp |= cpu_to_le32(AR9170_TX_PHY_SHORT_PREAMBLE);
+ */
+ }
+ power <<= AR9170_TX_PHY_TX_PWR_S;
+ power &= AR9170_TX_PHY_TX_PWR;
+ tmp |= cpu_to_le32(power);
+
+ /* set TX chains */
+ if (ar->eeprom.tx_mask == 1) {
+ chains = AR9170_TX_PHY_TXCHAIN_1;
+ } else {
+ chains = AR9170_TX_PHY_TXCHAIN_2;
+
+ /* >= 36M legacy OFDM - use only one chain */
+ if (rate && rate->bitrate >= 360 &&
+ !(txrate->flags & IEEE80211_TX_RC_MCS))
+ chains = AR9170_TX_PHY_TXCHAIN_1;
+ }
+ tmp |= cpu_to_le32(chains << AR9170_TX_PHY_TXCHAIN_S);
+
+ return tmp;
+}
+
+static bool carl9170_tx_rts_check(struct ar9170 *ar,
+ struct ieee80211_tx_rate *rate,
+ bool ampdu, bool multi)
+{
+ switch (ar->erp_mode) {
+ case CARL9170_ERP_AUTO:
+ if (ampdu)
+ break;
+
+ case CARL9170_ERP_MAC80211:
+ if (!(rate->flags & IEEE80211_TX_RC_USE_RTS_CTS))
+ break;
+
+ case CARL9170_ERP_RTS:
+ if (likely(!multi))
+ return true;
+
+ default:
+ break;
+ }
+
+ return false;
+}
+
+static bool carl9170_tx_cts_check(struct ar9170 *ar,
+ struct ieee80211_tx_rate *rate)
+{
+ switch (ar->erp_mode) {
+ case CARL9170_ERP_AUTO:
+ case CARL9170_ERP_MAC80211:
+ if (!(rate->flags & IEEE80211_TX_RC_USE_CTS_PROTECT))
+ break;
+
+ case CARL9170_ERP_CTS:
+ return true;
+
+ default:
+ break;
+ }
+
+ return false;
+}
+
+static int carl9170_tx_prepare(struct ar9170 *ar, struct sk_buff *skb)
+{
+ struct ieee80211_hdr *hdr;
+ struct _carl9170_tx_superframe *txc;
+ struct carl9170_vif_info *cvif;
+ struct ieee80211_tx_info *info;
+ struct ieee80211_tx_rate *txrate;
+ struct ieee80211_sta *sta;
+ struct carl9170_tx_info *arinfo;
+ unsigned int hw_queue;
+ int i;
+ u16 keytype = 0;
+ u16 len, icv = 0;
+ bool ampdu, no_ack;
+
+ BUILD_BUG_ON(sizeof(*arinfo) > sizeof(info->rate_driver_data));
+ BUILD_BUG_ON(sizeof(struct _carl9170_tx_superdesc) !=
+ CARL9170_TX_SUPERDESC_LEN);
+
+ BUILD_BUG_ON(sizeof(struct _ar9170_tx_hwdesc) !=
+ AR9170_TX_HWDESC_LEN);
+
+ BUILD_BUG_ON(IEEE80211_TX_MAX_RATES < CARL9170_TX_MAX_RATES);
+
+ hw_queue = ar9170_qmap[carl9170_get_queue(ar, skb)];
+
+ hdr = (void *)skb->data;
+ info = IEEE80211_SKB_CB(skb);
+ len = skb->len;
+
+ /*
+ * Note: If the frame was sent through a monitor interface,
+ * the ieee80211_vif pointer can be NULL.
+ */
+ if (likely(info->control.vif))
+ cvif = (void *) info->control.vif->drv_priv;
+ else
+ cvif = NULL;
+
+ sta = info->control.sta;
+
+ txc = (void *)skb_push(skb, sizeof(*txc));
+ memset(txc, 0, sizeof(*txc));
+
+ ampdu = !!(info->flags & IEEE80211_TX_CTL_AMPDU);
+ no_ack = !!(info->flags & IEEE80211_TX_CTL_NO_ACK);
+
+ if (info->control.hw_key) {
+ icv = info->control.hw_key->icv_len;
+
+ switch (info->control.hw_key->cipher) {
+ case WLAN_CIPHER_SUITE_WEP40:
+ case WLAN_CIPHER_SUITE_WEP104:
+ case WLAN_CIPHER_SUITE_TKIP:
+ keytype = AR9170_TX_MAC_ENCR_RC4;
+ break;
+ case WLAN_CIPHER_SUITE_CCMP:
+ keytype = AR9170_TX_MAC_ENCR_AES;
+ break;
+ default:
+ WARN_ON(1);
+ goto err_out;
+ }
+ }
+
+ BUILD_BUG_ON(AR9170_MAX_VIRTUAL_MAC >
+ ((CARL9170_TX_SUPER_MISC_VIF_ID >>
+ CARL9170_TX_SUPER_MISC_VIF_ID_S) + 1));
+
+ txc->s.len = cpu_to_le16(len + sizeof(*txc));
+ txc->f.length = cpu_to_le16(len + icv + 4);
+ SET_VAL(CARL9170_TX_SUPER_MISC_VIF_ID, txc->s.misc,
+ cvif ? cvif->id : 0);
+
+ txc->f.mac_control = cpu_to_le16(AR9170_TX_MAC_HW_DURATION |
+ AR9170_TX_MAC_BACKOFF);
+
+ SET_VAL(CARL9170_TX_SUPER_MISC_QUEUE, txc->s.misc, hw_queue);
+
+ txc->f.mac_control |= cpu_to_le16(hw_queue << AR9170_TX_MAC_QOS_S);
+ txc->f.mac_control |= cpu_to_le16(keytype);
+ txc->f.phy_control = cpu_to_le32(0);
+
+ if (no_ack)
+ txc->f.mac_control |= cpu_to_le16(AR9170_TX_MAC_NO_ACK);
+
+ if (info->flags & IEEE80211_TX_CTL_SEND_AFTER_DTIM)
+ txc->s.misc |= CARL9170_TX_SUPER_MISC_CAB;
+
+ txrate = &info->control.rates[0];
+ if (carl9170_tx_rts_check(ar, txrate, ampdu, no_ack))
+ txc->f.mac_control |= cpu_to_le16(AR9170_TX_MAC_PROT_RTS);
+ else if (carl9170_tx_cts_check(ar, txrate))
+ txc->f.mac_control |= cpu_to_le16(AR9170_TX_MAC_PROT_CTS);
+
+ SET_VAL(CARL9170_TX_SUPER_RI_TRIES, txc->s.ri[0], txrate->count);
+ txc->f.phy_control |= carl9170_tx_physet(ar, info, txrate);
+
+ if (info->flags & IEEE80211_TX_CTL_AMPDU) {
+ for (i = 1; i < CARL9170_TX_MAX_RATES; i++) {
+ txrate = &info->control.rates[i];
+ if (txrate->idx >= 0)
+ continue;
+
+ txrate->idx = 0;
+ txrate->count = ar->hw->max_rate_tries;
+ }
+ }
+
+ /*
+ * NOTE: For the first rate, the ERP & AMPDU flags are directly
+ * taken from mac_control. For all fallback rate, the firmware
+ * updates the mac_control flags from the rate info field.
+ */
+ for (i = 1; i < CARL9170_TX_MAX_RATES; i++) {
+ txrate = &info->control.rates[i];
+ if (txrate->idx < 0)
+ break;
+
+ SET_VAL(CARL9170_TX_SUPER_RI_TRIES, txc->s.ri[i],
+ txrate->count);
+
+ if (carl9170_tx_rts_check(ar, txrate, ampdu, no_ack))
+ txc->s.ri[i] |= (AR9170_TX_MAC_PROT_RTS <<
+ CARL9170_TX_SUPER_RI_ERP_PROT_S);
+ else if (carl9170_tx_cts_check(ar, txrate))
+ txc->s.ri[i] |= (AR9170_TX_MAC_PROT_CTS <<
+ CARL9170_TX_SUPER_RI_ERP_PROT_S);
+
+ /*
+ * unaggregated fallback, in case aggregation
+ * proves to be unsuccessful and unreliable.
+ */
+ if (ampdu && i < 3)
+ txc->s.ri[i] |= CARL9170_TX_SUPER_RI_AMPDU;
+
+ txc->s.rr[i - 1] = carl9170_tx_physet(ar, info, txrate);
+ }
+
+ if (ieee80211_is_probe_resp(hdr->frame_control))
+ txc->s.misc |= CARL9170_TX_SUPER_MISC_FILL_IN_TSF;
+
+ if (ampdu) {
+ unsigned int density, factor;
+
+ if (unlikely(!sta || !cvif))
+ goto err_out;
+
+ density = info->control.sta->ht_cap.ampdu_density;
+ factor = info->control.sta->ht_cap.ampdu_factor;
+
+ if (density) {
+ /*
+ * Watch out!
+ *
+ * Otus uses slightly different density values than
+ * those from the 802.11n spec.
+ */
+
+ density = max_t(unsigned int, density + 1, 7u);
+ }
+
+ factor = min_t(unsigned int, 1u, factor);
+
+ SET_VAL(CARL9170_TX_SUPER_AMPDU_DENSITY,
+ txc->s.ampdu_settings, density);
+
+ SET_VAL(CARL9170_TX_SUPER_AMPDU_FACTOR,
+ txc->s.ampdu_settings, factor);
+
+ if (info->control.rates[0].flags & IEEE80211_TX_RC_MCS) {
+ txc->f.mac_control |= cpu_to_le16(AR9170_TX_MAC_AGGR);
+ } else {
+ /*
+ * Not sure if it's even possible to aggregate
+ * non-ht rates with this HW.
+ */
+ WARN_ON_ONCE(1);
+ }
+ }
+
+ arinfo = (void *)info->rate_driver_data;
+ arinfo->timeout = jiffies;
+ arinfo->ar = ar;
+ kref_init(&arinfo->ref);
+ return 0;
+
+err_out:
+ skb_pull(skb, sizeof(*txc));
+ return -EINVAL;
+}
+
+static void carl9170_set_immba(struct ar9170 *ar, struct sk_buff *skb)
+{
+ struct _carl9170_tx_superframe *super;
+
+ super = (void *) skb->data;
+ super->f.mac_control |= cpu_to_le16(AR9170_TX_MAC_IMM_BA);
+}
+
+static void carl9170_set_ampdu_params(struct ar9170 *ar, struct sk_buff *skb)
+{
+ struct _carl9170_tx_superframe *super;
+ int tmp;
+
+ super = (void *) skb->data;
+
+ tmp = (super->s.ampdu_settings & CARL9170_TX_SUPER_AMPDU_DENSITY) <<
+ CARL9170_TX_SUPER_AMPDU_DENSITY_S;
+
+ /*
+ * If you haven't noticed carl9170_tx_prepare has already filled
+ * in all ampdu spacing & factor parameters.
+ * Now it's the time to check whenever the settings have to be
+ * updated by the firmware, or if everything is still the same.
+ *
+ * There's no sane way to handle different density values with
+ * this hardware, so we may as well just do the compare in the
+ * driver.
+ */
+
+ if (tmp != ar->current_density) {
+ ar->current_density = tmp;
+ super->s.ampdu_settings |=
+ CARL9170_TX_SUPER_AMPDU_COMMIT_DENSITY;
+ }
+
+ tmp = (super->s.ampdu_settings & CARL9170_TX_SUPER_AMPDU_FACTOR) <<
+ CARL9170_TX_SUPER_AMPDU_FACTOR_S;
+
+ if (tmp != ar->current_factor) {
+ ar->current_factor = tmp;
+ super->s.ampdu_settings |=
+ CARL9170_TX_SUPER_AMPDU_COMMIT_FACTOR;
+ }
+}
+
+static bool carl9170_tx_rate_check(struct ar9170 *ar, struct sk_buff *_dest,
+ struct sk_buff *_src)
+{
+ struct _carl9170_tx_superframe *dest, *src;
+
+ dest = (void *) _dest->data;
+ src = (void *) _src->data;
+
+ /*
+ * The mac80211 rate control algorithm expects that all MPDUs in
+ * an AMPDU share the same tx vectors.
+ * This is not really obvious right now, because the hardware
+ * does the AMPDU setup according to its own rulebook.
+ * Our nicely assembled, strictly monotonic increasing mpdu
+ * chains will be broken up, mashed back together...
+ */
+
+ return (dest->f.phy_control == src->f.phy_control);
+}
+
+static void carl9170_tx_ampdu(struct ar9170 *ar)
+{
+ struct sk_buff_head agg;
+ struct carl9170_sta_tid *tid_info;
+ struct sk_buff *skb, *first;
+ unsigned int i = 0, done_ampdus = 0;
+ u16 seq, queue, tmpssn;
+
+ atomic_inc(&ar->tx_ampdu_scheduler);
+ ar->tx_ampdu_schedule = false;
+
+ if (atomic_read(&ar->tx_ampdu_upload))
+ return;
+
+ if (!ar->tx_ampdu_list_len)
+ return;
+
+ __skb_queue_head_init(&agg);
+
+ rcu_read_lock();
+ tid_info = rcu_dereference(ar->tx_ampdu_iter);
+ if (WARN_ON_ONCE(!tid_info)) {
+ rcu_read_unlock();
+ return;
+ }
+
+retry:
+ list_for_each_entry_continue_rcu(tid_info, &ar->tx_ampdu_list, list) {
+ i++;
+
+ if (tid_info->state < CARL9170_TID_STATE_PROGRESS)
+ continue;
+
+ queue = TID_TO_WME_AC(tid_info->tid);
+
+ spin_lock_bh(&tid_info->lock);
+ if (tid_info->state != CARL9170_TID_STATE_XMIT) {
+ first = skb_peek(&tid_info->queue);
+ if (first) {
+ struct ieee80211_tx_info *txinfo;
+ struct carl9170_tx_info *arinfo;
+
+ txinfo = IEEE80211_SKB_CB(first);
+ arinfo = (void *) txinfo->rate_driver_data;
+
+ if (time_is_after_jiffies(arinfo->timeout +
+ msecs_to_jiffies(CARL9170_QUEUE_TIMEOUT))
+ == true)
+ goto processed;
+
+ /*
+ * We've been waiting for the frame which
+ * matches "snx" (start sequence of the
+ * next aggregate) for some time now.
+ *
+ * But it never arrived. Therefore
+ * jump to the next available frame
+ * and kick-start the transmission.
+ *
+ * Note: This might induce odd latency
+ * spikes because the receiver will be
+ * waiting for the lost frame too.
+ */
+ ar->tx_ampdu_timeout++;
+
+ tid_info->snx = carl9170_get_seq(first);
+ tid_info->state = CARL9170_TID_STATE_XMIT;
+ } else {
+ goto processed;
+ }
+ }
+
+ tid_info->counter++;
+ first = skb_peek(&tid_info->queue);
+ tmpssn = carl9170_get_seq(first);
+ seq = tid_info->snx;
+
+ if (unlikely(tmpssn != seq)) {
+ tid_info->state = CARL9170_TID_STATE_IDLE;
+
+ goto processed;
+ }
+
+ while ((skb = skb_peek(&tid_info->queue))) {
+ /* strict 0, 1, ..., n - 1, n frame sequence order */
+ if (unlikely(carl9170_get_seq(skb) != seq))
+ break;
+
+ /* don't upload more than AMPDU FACTOR allows. */
+ if (unlikely(SEQ_DIFF(tid_info->snx, tid_info->bsn) >=
+ (tid_info->max - 1)))
+ break;
+
+ if (!carl9170_tx_rate_check(ar, skb, first))
+ break;
+
+ atomic_inc(&ar->tx_ampdu_upload);
+ tid_info->snx = seq = SEQ_NEXT(seq);
+ __skb_unlink(skb, &tid_info->queue);
+
+ __skb_queue_tail(&agg, skb);
+
+ if (skb_queue_len(&agg) >= CARL9170_NUM_TX_AGG_MAX)
+ break;
+ }
+
+ if (skb_queue_empty(&tid_info->queue) ||
+ carl9170_get_seq(skb_peek(&tid_info->queue)) !=
+ tid_info->snx) {
+ /*
+ * stop TID, if A-MPDU frames are still missing,
+ * or whenever the queue is empty.
+ */
+
+ tid_info->state = CARL9170_TID_STATE_IDLE;
+ }
+ done_ampdus++;
+
+processed:
+ spin_unlock_bh(&tid_info->lock);
+
+ if (skb_queue_empty(&agg))
+ continue;
+
+ /* apply ampdu spacing & factor settings */
+ carl9170_set_ampdu_params(ar, skb_peek(&agg));
+
+ /* set aggregation push bit */
+ carl9170_set_immba(ar, skb_peek_tail(&agg));
+
+ spin_lock_bh(&ar->tx_pending[queue].lock);
+ skb_queue_splice_tail_init(&agg, &ar->tx_pending[queue]);
+ spin_unlock_bh(&ar->tx_pending[queue].lock);
+ ar->tx_schedule = true;
+ }
+ if ((done_ampdus++ == 0) && (i++ == 0))
+ goto retry;
+
+ rcu_assign_pointer(ar->tx_ampdu_iter, tid_info);
+ rcu_read_unlock();
+}
+
+static struct sk_buff *carl9170_tx_pick_skb(struct ar9170 *ar,
+ struct sk_buff_head *queue)
+{
+ struct sk_buff *skb;
+ struct ieee80211_tx_info *info;
+ struct carl9170_tx_info *arinfo;
+
+ BUILD_BUG_ON(sizeof(*arinfo) > sizeof(info->rate_driver_data));
+
+ spin_lock_bh(&queue->lock);
+ skb = skb_peek(queue);
+ if (unlikely(!skb))
+ goto err_unlock;
+
+ if (carl9170_alloc_dev_space(ar, skb))
+ goto err_unlock;
+
+ __skb_unlink(skb, queue);
+ spin_unlock_bh(&queue->lock);
+
+ info = IEEE80211_SKB_CB(skb);
+ arinfo = (void *) info->rate_driver_data;
+
+ arinfo->timeout = jiffies;
+
+ /*
+ * increase ref count to "2".
+ * Ref counting is the easiest way to solve the race between
+ * the the urb's completion routine: carl9170_tx_callback and
+ * wlan tx status functions: carl9170_tx_status/janitor.
+ */
+ carl9170_tx_get_skb(skb);
+
+ return skb;
+
+err_unlock:
+ spin_unlock_bh(&queue->lock);
+ return NULL;
+}
+
+void carl9170_tx_drop(struct ar9170 *ar, struct sk_buff *skb)
+{
+ struct _carl9170_tx_superframe *super;
+ uint8_t q = 0;
+
+ ar->tx_dropped++;
+
+ super = (void *)skb->data;
+ SET_VAL(CARL9170_TX_SUPER_MISC_QUEUE, q,
+ ar9170_qmap[carl9170_get_queue(ar, skb)]);
+ __carl9170_tx_process_status(ar, super->s.cookie, q);
+}
+
+static void carl9170_tx(struct ar9170 *ar)
+{
+ struct sk_buff *skb;
+ unsigned int i, q;
+ bool schedule_garbagecollector = false;
+
+ ar->tx_schedule = false;
+
+ if (unlikely(!IS_STARTED(ar)))
+ return;
+
+ carl9170_usb_handle_tx_err(ar);
+
+ for (i = 0; i < ar->hw->queues; i++) {
+ while (!skb_queue_empty(&ar->tx_pending[i])) {
+ skb = carl9170_tx_pick_skb(ar, &ar->tx_pending[i]);
+ if (unlikely(!skb))
+ break;
+
+ atomic_inc(&ar->tx_total_pending);
+
+ q = __carl9170_get_queue(ar, i);
+ /*
+ * NB: tx_status[i] vs. tx_status[q],
+ * TODO: Move into pick_skb or alloc_dev_space.
+ */
+ skb_queue_tail(&ar->tx_status[q], skb);
+
+ carl9170_usb_tx(ar, skb);
+ schedule_garbagecollector = true;
+ }
+ }
+
+ if (!schedule_garbagecollector)
+ return;
+
+ ieee80211_queue_delayed_work(ar->hw, &ar->tx_janitor,
+ msecs_to_jiffies(CARL9170_TX_TIMEOUT));
+}
+
+static bool carl9170_tx_ampdu_queue(struct ar9170 *ar,
+ struct ieee80211_sta *sta, struct sk_buff *skb)
+{
+ struct carl9170_sta_info *sta_info;
+ struct carl9170_sta_tid *agg;
+ struct sk_buff *iter;
+ unsigned int max;
+ u16 tid, seq, qseq, off;
+ bool run = false;
+
+ tid = carl9170_get_tid(skb);
+ seq = carl9170_get_seq(skb);
+ sta_info = (void *) sta->drv_priv;
+
+ rcu_read_lock();
+ agg = rcu_dereference(sta_info->agg[tid]);
+ max = sta_info->ampdu_max_len;
+
+ if (!agg)
+ goto err_unlock_rcu;
+
+ spin_lock_bh(&agg->lock);
+ if (unlikely(agg->state < CARL9170_TID_STATE_IDLE))
+ goto err_unlock;
+
+ /* check if sequence is within the BA window */
+ if (unlikely(!BAW_WITHIN(agg->bsn, CARL9170_BAW_BITS, seq)))
+ goto err_unlock;
+
+ if (WARN_ON_ONCE(!BAW_WITHIN(agg->snx, CARL9170_BAW_BITS, seq)))
+ goto err_unlock;
+
+ off = SEQ_DIFF(seq, agg->bsn);
+ if (WARN_ON_ONCE(test_and_set_bit(off, agg->bitmap)))
+ goto err_unlock;
+
+ if (likely(BAW_WITHIN(agg->hsn, CARL9170_BAW_BITS, seq))) {
+ __skb_queue_tail(&agg->queue, skb);
+ agg->hsn = seq;
+ goto queued;
+ }
+
+ skb_queue_reverse_walk(&agg->queue, iter) {
+ qseq = carl9170_get_seq(iter);
+
+ if (BAW_WITHIN(qseq, CARL9170_BAW_BITS, seq)) {
+ __skb_queue_after(&agg->queue, iter, skb);
+ goto queued;
+ }
+ }
+
+ __skb_queue_head(&agg->queue, skb);
+queued:
+
+ if (unlikely(agg->state != CARL9170_TID_STATE_XMIT)) {
+ if (agg->snx == carl9170_get_seq(skb_peek(&agg->queue))) {
+ agg->state = CARL9170_TID_STATE_XMIT;
+ run = true;
+ }
+ }
+
+ spin_unlock_bh(&agg->lock);
+ rcu_read_unlock();
+
+ return run;
+
+err_unlock:
+ spin_unlock_bh(&agg->lock);
+
+err_unlock_rcu:
+ rcu_read_unlock();
+ carl9170_tx_status(ar, skb, false);
+ ar->tx_dropped++;
+ return false;
+}
+
+int carl9170_op_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
+{
+ struct ar9170 *ar = hw->priv;
+ struct ieee80211_tx_info *info;
+ struct ieee80211_sta *sta;
+ bool run;
+
+ if (unlikely(!IS_STARTED(ar)))
+ goto err_free;
+
+ info = IEEE80211_SKB_CB(skb);
+ sta = info->control.sta;
+
+ if (unlikely(carl9170_tx_prepare(ar, skb)))
+ goto err_free;
+
+ carl9170_tx_accounting(ar, skb);
+ /*
+ * from now on, one has to use carl9170_tx_status to free
+ * all ressouces which are associated with the frame.
+ */
+
+ if (info->flags & IEEE80211_TX_CTL_AMPDU) {
+ if (WARN_ON_ONCE(!sta))
+ goto err_free;
+
+ run = carl9170_tx_ampdu_queue(ar, sta, skb);
+ if (run)
+ carl9170_tx_ampdu(ar);
+
+ } else {
+ unsigned int queue = skb_get_queue_mapping(skb);
+
+ skb_queue_tail(&ar->tx_pending[queue], skb);
+ }
+
+ carl9170_tx(ar);
+ return NETDEV_TX_OK;
+
+err_free:
+ ar->tx_dropped++;
+ dev_kfree_skb_any(skb);
+ return NETDEV_TX_OK;
+}
+
+void carl9170_tx_scheduler(struct ar9170 *ar)
+{
+
+ if (ar->tx_ampdu_schedule)
+ carl9170_tx_ampdu(ar);
+
+ if (ar->tx_schedule)
+ carl9170_tx(ar);
+}
--- /dev/null
+/*
+ * Atheros CARL9170 driver
+ *
+ * USB - frontend
+ *
+ * Copyright 2008, Johannes Berg <johannes@sipsolutions.net>
+ * Copyright 2009, 2010, Christian Lamparter <chunkeey@googlemail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING. If not, see
+ * http://www.gnu.org/licenses/.
+ *
+ * This file incorporates work covered by the following copyright and
+ * permission notice:
+ * Copyright (c) 2007-2008 Atheros Communications, Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/usb.h>
+#include <linux/firmware.h>
+#include <linux/etherdevice.h>
+#include <linux/device.h>
+#include <net/mac80211.h>
+#include "carl9170.h"
+#include "cmd.h"
+#include "hw.h"
+#include "fwcmd.h"
+
+MODULE_AUTHOR("Johannes Berg <johannes@sipsolutions.net>");
+MODULE_AUTHOR("Christian Lamparter <chunkeey@googlemail.com>");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Atheros AR9170 802.11n USB wireless");
+MODULE_FIRMWARE(CARL9170FW_NAME);
+MODULE_ALIAS("ar9170usb");
+MODULE_ALIAS("arusb_lnx");
+
+/*
+ * Note:
+ *
+ * Always update our wiki's device list (located at:
+ * http://wireless.kernel.org/en/users/Drivers/ar9170/devices ),
+ * whenever you add a new device.
+ */
+static struct usb_device_id carl9170_usb_ids[] = {
+ /* Atheros 9170 */
+ { USB_DEVICE(0x0cf3, 0x9170) },
+ /* Atheros TG121N */
+ { USB_DEVICE(0x0cf3, 0x1001) },
+ /* TP-Link TL-WN821N v2 */
+ { USB_DEVICE(0x0cf3, 0x1002), .driver_info = CARL9170_WPS_BUTTON |
+ CARL9170_ONE_LED },
+ /* 3Com Dual Band 802.11n USB Adapter */
+ { USB_DEVICE(0x0cf3, 0x1010) },
+ /* H3C Dual Band 802.11n USB Adapter */
+ { USB_DEVICE(0x0cf3, 0x1011) },
+ /* Cace Airpcap NX */
+ { USB_DEVICE(0xcace, 0x0300) },
+ /* D-Link DWA 160 A1 */
+ { USB_DEVICE(0x07d1, 0x3c10) },
+ /* D-Link DWA 160 A2 */
+ { USB_DEVICE(0x07d1, 0x3a09) },
+ /* Netgear WNA1000 */
+ { USB_DEVICE(0x0846, 0x9040) },
+ /* Netgear WNDA3100 */
+ { USB_DEVICE(0x0846, 0x9010) },
+ /* Netgear WN111 v2 */
+ { USB_DEVICE(0x0846, 0x9001), .driver_info = CARL9170_ONE_LED },
+ /* Zydas ZD1221 */
+ { USB_DEVICE(0x0ace, 0x1221) },
+ /* Proxim ORiNOCO 802.11n USB */
+ { USB_DEVICE(0x1435, 0x0804) },
+ /* WNC Generic 11n USB Dongle */
+ { USB_DEVICE(0x1435, 0x0326) },
+ /* ZyXEL NWD271N */
+ { USB_DEVICE(0x0586, 0x3417) },
+ /* Z-Com UB81 BG */
+ { USB_DEVICE(0x0cde, 0x0023) },
+ /* Z-Com UB82 ABG */
+ { USB_DEVICE(0x0cde, 0x0026) },
+ /* Sphairon Homelink 1202 */
+ { USB_DEVICE(0x0cde, 0x0027) },
+ /* Arcadyan WN7512 */
+ { USB_DEVICE(0x083a, 0xf522) },
+ /* Planex GWUS300 */
+ { USB_DEVICE(0x2019, 0x5304) },
+ /* IO-Data WNGDNUS2 */
+ { USB_DEVICE(0x04bb, 0x093f) },
+ /* NEC WL300NU-G */
+ { USB_DEVICE(0x0409, 0x0249) },
+ /* AVM FRITZ!WLAN USB Stick N */
+ { USB_DEVICE(0x057c, 0x8401) },
+ /* AVM FRITZ!WLAN USB Stick N 2.4 */
+ { USB_DEVICE(0x057c, 0x8402) },
+ /* Qwest/Actiontec 802AIN Wireless N USB Network Adapter */
+ { USB_DEVICE(0x1668, 0x1200) },
+
+ /* terminate */
+ {}
+};
+MODULE_DEVICE_TABLE(usb, carl9170_usb_ids);
+
+static void carl9170_usb_submit_data_urb(struct ar9170 *ar)
+{
+ struct urb *urb;
+ int err;
+
+ if (atomic_inc_return(&ar->tx_anch_urbs) > AR9170_NUM_TX_URBS)
+ goto err_acc;
+
+ urb = usb_get_from_anchor(&ar->tx_wait);
+ if (!urb)
+ goto err_acc;
+
+ usb_anchor_urb(urb, &ar->tx_anch);
+
+ err = usb_submit_urb(urb, GFP_ATOMIC);
+ if (unlikely(err)) {
+ if (net_ratelimit()) {
+ dev_err(&ar->udev->dev, "tx submit failed (%d)\n",
+ urb->status);
+ }
+
+ usb_unanchor_urb(urb);
+ usb_anchor_urb(urb, &ar->tx_err);
+ }
+
+ usb_free_urb(urb);
+
+ if (likely(err == 0))
+ return;
+
+err_acc:
+ atomic_dec(&ar->tx_anch_urbs);
+}
+
+static void carl9170_usb_tx_data_complete(struct urb *urb)
+{
+ struct ar9170 *ar = (struct ar9170 *)
+ usb_get_intfdata(usb_ifnum_to_if(urb->dev, 0));
+
+ if (WARN_ON_ONCE(!ar)) {
+ dev_kfree_skb_irq(urb->context);
+ return;
+ }
+
+ atomic_dec(&ar->tx_anch_urbs);
+
+ switch (urb->status) {
+ /* everything is fine */
+ case 0:
+ carl9170_tx_callback(ar, (void *)urb->context);
+ break;
+
+ /* disconnect */
+ case -ENOENT:
+ case -ECONNRESET:
+ case -ENODEV:
+ case -ESHUTDOWN:
+ /*
+ * Defer the frame clean-up to the tasklet worker.
+ * This is necessary, because carl9170_tx_drop
+ * does not work in an irqsave context.
+ */
+ usb_anchor_urb(urb, &ar->tx_err);
+ return;
+
+ /* a random transmission error has occurred? */
+ default:
+ if (net_ratelimit()) {
+ dev_err(&ar->udev->dev, "tx failed (%d)\n",
+ urb->status);
+ }
+
+ usb_anchor_urb(urb, &ar->tx_err);
+ break;
+ }
+
+ if (likely(IS_STARTED(ar)))
+ carl9170_usb_submit_data_urb(ar);
+}
+
+static int carl9170_usb_submit_cmd_urb(struct ar9170 *ar)
+{
+ struct urb *urb;
+ int err;
+
+ if (atomic_inc_return(&ar->tx_cmd_urbs) != 1) {
+ atomic_dec(&ar->tx_cmd_urbs);
+ return 0;
+ }
+
+ urb = usb_get_from_anchor(&ar->tx_cmd);
+ if (!urb) {
+ atomic_dec(&ar->tx_cmd_urbs);
+ return 0;
+ }
+
+ usb_anchor_urb(urb, &ar->tx_anch);
+ err = usb_submit_urb(urb, GFP_ATOMIC);
+ if (unlikely(err)) {
+ usb_unanchor_urb(urb);
+ atomic_dec(&ar->tx_cmd_urbs);
+ }
+ usb_free_urb(urb);
+
+ return err;
+}
+
+static void carl9170_usb_cmd_complete(struct urb *urb)
+{
+ struct ar9170 *ar = urb->context;
+ int err = 0;
+
+ if (WARN_ON_ONCE(!ar))
+ return;
+
+ atomic_dec(&ar->tx_cmd_urbs);
+
+ switch (urb->status) {
+ /* everything is fine */
+ case 0:
+ break;
+
+ /* disconnect */
+ case -ENOENT:
+ case -ECONNRESET:
+ case -ENODEV:
+ case -ESHUTDOWN:
+ return;
+
+ default:
+ err = urb->status;
+ break;
+ }
+
+ if (!IS_INITIALIZED(ar))
+ return;
+
+ if (err)
+ dev_err(&ar->udev->dev, "submit cmd cb failed (%d).\n", err);
+
+ err = carl9170_usb_submit_cmd_urb(ar);
+ if (err)
+ dev_err(&ar->udev->dev, "submit cmd failed (%d).\n", err);
+}
+
+static void carl9170_usb_rx_irq_complete(struct urb *urb)
+{
+ struct ar9170 *ar = urb->context;
+
+ if (WARN_ON_ONCE(!ar))
+ return;
+
+ switch (urb->status) {
+ /* everything is fine */
+ case 0:
+ break;
+
+ /* disconnect */
+ case -ENOENT:
+ case -ECONNRESET:
+ case -ENODEV:
+ case -ESHUTDOWN:
+ return;
+
+ default:
+ goto resubmit;
+ }
+
+ carl9170_handle_command_response(ar, urb->transfer_buffer,
+ urb->actual_length);
+
+resubmit:
+ usb_anchor_urb(urb, &ar->rx_anch);
+ if (unlikely(usb_submit_urb(urb, GFP_ATOMIC)))
+ usb_unanchor_urb(urb);
+}
+
+static int carl9170_usb_submit_rx_urb(struct ar9170 *ar, gfp_t gfp)
+{
+ struct urb *urb;
+ int err = 0, runs = 0;
+
+ while ((atomic_read(&ar->rx_anch_urbs) < AR9170_NUM_RX_URBS) &&
+ (runs++ < AR9170_NUM_RX_URBS)) {
+ err = -ENOSPC;
+ urb = usb_get_from_anchor(&ar->rx_pool);
+ if (urb) {
+ usb_anchor_urb(urb, &ar->rx_anch);
+ err = usb_submit_urb(urb, gfp);
+ if (unlikely(err)) {
+ usb_unanchor_urb(urb);
+ usb_anchor_urb(urb, &ar->rx_pool);
+ } else {
+ atomic_dec(&ar->rx_pool_urbs);
+ atomic_inc(&ar->rx_anch_urbs);
+ }
+ usb_free_urb(urb);
+ }
+ }
+
+ return err;
+}
+
+static void carl9170_usb_rx_work(struct ar9170 *ar)
+{
+ struct urb *urb;
+ int i;
+
+ for (i = 0; i < AR9170_NUM_RX_URBS_POOL; i++) {
+ urb = usb_get_from_anchor(&ar->rx_work);
+ if (!urb)
+ break;
+
+ atomic_dec(&ar->rx_work_urbs);
+ if (IS_INITIALIZED(ar)) {
+ carl9170_rx(ar, urb->transfer_buffer,
+ urb->actual_length);
+ }
+
+ usb_anchor_urb(urb, &ar->rx_pool);
+ atomic_inc(&ar->rx_pool_urbs);
+
+ usb_free_urb(urb);
+
+ carl9170_usb_submit_rx_urb(ar, GFP_ATOMIC);
+ }
+}
+
+void carl9170_usb_handle_tx_err(struct ar9170 *ar)
+{
+ struct urb *urb;
+
+ while ((urb = usb_get_from_anchor(&ar->tx_err))) {
+ struct sk_buff *skb = (void *)urb->context;
+
+ carl9170_tx_drop(ar, skb);
+ carl9170_tx_callback(ar, skb);
+ usb_free_urb(urb);
+ }
+}
+
+static void carl9170_usb_tasklet(unsigned long data)
+{
+ struct ar9170 *ar = (struct ar9170 *) data;
+
+ carl9170_usb_rx_work(ar);
+
+ /*
+ * Strictly speaking: The tx scheduler is not part of the USB system.
+ * But the rx worker returns frames back to the mac80211-stack and
+ * this is the _perfect_ place to generate the next transmissions.
+ */
+ if (IS_STARTED(ar))
+ carl9170_tx_scheduler(ar);
+}
+
+static void carl9170_usb_rx_complete(struct urb *urb)
+{
+ struct ar9170 *ar = (struct ar9170 *)urb->context;
+ int err;
+
+ if (WARN_ON_ONCE(!ar))
+ return;
+
+ atomic_dec(&ar->rx_anch_urbs);
+
+ switch (urb->status) {
+ case 0:
+ /* rx path */
+ usb_anchor_urb(urb, &ar->rx_work);
+ atomic_inc(&ar->rx_work_urbs);
+ break;
+
+ case -ENOENT:
+ case -ECONNRESET:
+ case -ENODEV:
+ case -ESHUTDOWN:
+ /* handle disconnect events*/
+ return;
+
+ default:
+ /* handle all other errors */
+ usb_anchor_urb(urb, &ar->rx_pool);
+ atomic_inc(&ar->rx_pool_urbs);
+ break;
+ }
+
+ err = carl9170_usb_submit_rx_urb(ar, GFP_ATOMIC);
+ if (unlikely(err)) {
+ /*
+ * usb_submit_rx_urb reported a problem.
+ * In case this is due to a rx buffer shortage,
+ * elevate the tasklet worker priority to
+ * the highest available level.
+ */
+ tasklet_hi_schedule(&ar->usb_tasklet);
+
+ if (atomic_read(&ar->rx_anch_urbs) == 0) {
+ /*
+ * The system is too slow to cope with
+ * the enormous workload. We have simply
+ * run out of active rx urbs and this
+ * unfortunatly leads to an unpredictable
+ * device.
+ */
+
+ carl9170_restart(ar, CARL9170_RR_SLOW_SYSTEM);
+ }
+ } else {
+ /*
+ * Using anything less than _high_ priority absolutely
+ * kills the rx performance my UP-System...
+ */
+ tasklet_hi_schedule(&ar->usb_tasklet);
+ }
+}
+
+static struct urb *carl9170_usb_alloc_rx_urb(struct ar9170 *ar, gfp_t gfp)
+{
+ struct urb *urb;
+ void *buf;
+
+ buf = kmalloc(ar->fw.rx_size, gfp);
+ if (!buf)
+ return NULL;
+
+ urb = usb_alloc_urb(0, gfp);
+ if (!urb) {
+ kfree(buf);
+ return NULL;
+ }
+
+ usb_fill_bulk_urb(urb, ar->udev, usb_rcvbulkpipe(ar->udev,
+ AR9170_USB_EP_RX), buf, ar->fw.rx_size,
+ carl9170_usb_rx_complete, ar);
+
+ urb->transfer_flags |= URB_FREE_BUFFER;
+
+ return urb;
+}
+
+static int carl9170_usb_send_rx_irq_urb(struct ar9170 *ar)
+{
+ struct urb *urb = NULL;
+ void *ibuf;
+ int err = -ENOMEM;
+
+ urb = usb_alloc_urb(0, GFP_KERNEL);
+ if (!urb)
+ goto out;
+
+ ibuf = kmalloc(AR9170_USB_EP_CTRL_MAX, GFP_KERNEL);
+ if (!ibuf)
+ goto out;
+
+ usb_fill_int_urb(urb, ar->udev, usb_rcvintpipe(ar->udev,
+ AR9170_USB_EP_IRQ), ibuf, AR9170_USB_EP_CTRL_MAX,
+ carl9170_usb_rx_irq_complete, ar, 1);
+
+ urb->transfer_flags |= URB_FREE_BUFFER;
+
+ usb_anchor_urb(urb, &ar->rx_anch);
+ err = usb_submit_urb(urb, GFP_KERNEL);
+ if (err)
+ usb_unanchor_urb(urb);
+
+out:
+ usb_free_urb(urb);
+ return err;
+}
+
+static int carl9170_usb_init_rx_bulk_urbs(struct ar9170 *ar)
+{
+ struct urb *urb;
+ int i, err = -EINVAL;
+
+ /*
+ * The driver actively maintains a second shadow
+ * pool for inactive, but fully-prepared rx urbs.
+ *
+ * The pool should help the driver to master huge
+ * workload spikes without running the risk of
+ * undersupplying the hardware or wasting time by
+ * processing rx data (streams) inside the urb
+ * completion (hardirq context).
+ */
+ for (i = 0; i < AR9170_NUM_RX_URBS_POOL; i++) {
+ urb = carl9170_usb_alloc_rx_urb(ar, GFP_KERNEL);
+ if (!urb) {
+ err = -ENOMEM;
+ goto err_out;
+ }
+
+ usb_anchor_urb(urb, &ar->rx_pool);
+ atomic_inc(&ar->rx_pool_urbs);
+ usb_free_urb(urb);
+ }
+
+ err = carl9170_usb_submit_rx_urb(ar, GFP_KERNEL);
+ if (err)
+ goto err_out;
+
+ /* the device now waiting for the firmware. */
+ carl9170_set_state_when(ar, CARL9170_STOPPED, CARL9170_IDLE);
+ return 0;
+
+err_out:
+
+ usb_scuttle_anchored_urbs(&ar->rx_pool);
+ usb_scuttle_anchored_urbs(&ar->rx_work);
+ usb_kill_anchored_urbs(&ar->rx_anch);
+ return err;
+}
+
+static int carl9170_usb_flush(struct ar9170 *ar)
+{
+ struct urb *urb;
+ int ret, err = 0;
+
+ while ((urb = usb_get_from_anchor(&ar->tx_wait))) {
+ struct sk_buff *skb = (void *)urb->context;
+ carl9170_tx_drop(ar, skb);
+ carl9170_tx_callback(ar, skb);
+ usb_free_urb(urb);
+ }
+
+ ret = usb_wait_anchor_empty_timeout(&ar->tx_cmd, HZ);
+ if (ret == 0)
+ err = -ETIMEDOUT;
+
+ /* lets wait a while until the tx - queues are dried out */
+ ret = usb_wait_anchor_empty_timeout(&ar->tx_anch, HZ);
+ if (ret == 0)
+ err = -ETIMEDOUT;
+
+ usb_kill_anchored_urbs(&ar->tx_anch);
+ carl9170_usb_handle_tx_err(ar);
+
+ return err;
+}
+
+static void carl9170_usb_cancel_urbs(struct ar9170 *ar)
+{
+ int err;
+
+ carl9170_set_state(ar, CARL9170_UNKNOWN_STATE);
+
+ err = carl9170_usb_flush(ar);
+ if (err)
+ dev_err(&ar->udev->dev, "stuck tx urbs!\n");
+
+ usb_poison_anchored_urbs(&ar->tx_anch);
+ carl9170_usb_handle_tx_err(ar);
+ usb_poison_anchored_urbs(&ar->rx_anch);
+
+ tasklet_kill(&ar->usb_tasklet);
+
+ usb_scuttle_anchored_urbs(&ar->rx_work);
+ usb_scuttle_anchored_urbs(&ar->rx_pool);
+ usb_scuttle_anchored_urbs(&ar->tx_cmd);
+}
+
+int __carl9170_exec_cmd(struct ar9170 *ar, struct carl9170_cmd *cmd,
+ const bool free_buf)
+{
+ struct urb *urb;
+
+ if (!IS_INITIALIZED(ar))
+ return -EPERM;
+
+ if (WARN_ON(cmd->hdr.len > CARL9170_MAX_CMD_LEN - 4))
+ return -EINVAL;
+
+ urb = usb_alloc_urb(0, GFP_ATOMIC);
+ if (!urb)
+ return -ENOMEM;
+
+ usb_fill_int_urb(urb, ar->udev, usb_sndintpipe(ar->udev,
+ AR9170_USB_EP_CMD), cmd, cmd->hdr.len + 4,
+ carl9170_usb_cmd_complete, ar, 1);
+
+ urb->transfer_flags |= URB_ZERO_PACKET;
+
+ if (free_buf)
+ urb->transfer_flags |= URB_FREE_BUFFER;
+
+ usb_anchor_urb(urb, &ar->tx_cmd);
+ usb_free_urb(urb);
+
+ return carl9170_usb_submit_cmd_urb(ar);
+}
+
+int carl9170_exec_cmd(struct ar9170 *ar, const enum carl9170_cmd_oids cmd,
+ unsigned int plen, void *payload, unsigned int outlen, void *out)
+{
+ int err = -ENOMEM;
+
+ if (!IS_ACCEPTING_CMD(ar))
+ return -EIO;
+
+ if (!(cmd & CARL9170_CMD_ASYNC_FLAG))
+ might_sleep();
+
+ ar->cmd.hdr.len = plen;
+ ar->cmd.hdr.cmd = cmd;
+ /* writing multiple regs fills this buffer already */
+ if (plen && payload != (u8 *)(ar->cmd.data))
+ memcpy(ar->cmd.data, payload, plen);
+
+ spin_lock_bh(&ar->cmd_lock);
+ ar->readbuf = (u8 *)out;
+ ar->readlen = outlen;
+ spin_unlock_bh(&ar->cmd_lock);
+
+ err = __carl9170_exec_cmd(ar, &ar->cmd, false);
+
+ if (!(cmd & CARL9170_CMD_ASYNC_FLAG)) {
+ err = wait_for_completion_timeout(&ar->cmd_wait, HZ);
+ if (err == 0) {
+ err = -ETIMEDOUT;
+ goto err_unbuf;
+ }
+
+ if (ar->readlen != outlen) {
+ err = -EMSGSIZE;
+ goto err_unbuf;
+ }
+ }
+
+ return 0;
+
+err_unbuf:
+ /* Maybe the device was removed in the moment we were waiting? */
+ if (IS_STARTED(ar)) {
+ dev_err(&ar->udev->dev, "no command feedback "
+ "received (%d).\n", err);
+
+ /* provide some maybe useful debug information */
+ print_hex_dump_bytes("carl9170 cmd: ", DUMP_PREFIX_NONE,
+ &ar->cmd, plen + 4);
+
+ carl9170_restart(ar, CARL9170_RR_COMMAND_TIMEOUT);
+ }
+
+ /* invalidate to avoid completing the next command prematurely */
+ spin_lock_bh(&ar->cmd_lock);
+ ar->readbuf = NULL;
+ ar->readlen = 0;
+ spin_unlock_bh(&ar->cmd_lock);
+
+ return err;
+}
+
+void carl9170_usb_tx(struct ar9170 *ar, struct sk_buff *skb)
+{
+ struct urb *urb;
+ struct ar9170_stream *tx_stream;
+ void *data;
+ unsigned int len;
+
+ if (!IS_STARTED(ar))
+ goto err_drop;
+
+ urb = usb_alloc_urb(0, GFP_ATOMIC);
+ if (!urb)
+ goto err_drop;
+
+ if (ar->fw.tx_stream) {
+ tx_stream = (void *) (skb->data - sizeof(*tx_stream));
+
+ len = skb->len + sizeof(*tx_stream);
+ tx_stream->length = cpu_to_le16(len);
+ tx_stream->tag = cpu_to_le16(AR9170_TX_STREAM_TAG);
+ data = tx_stream;
+ } else {
+ data = skb->data;
+ len = skb->len;
+ }
+
+ usb_fill_bulk_urb(urb, ar->udev, usb_sndbulkpipe(ar->udev,
+ AR9170_USB_EP_TX), data, len,
+ carl9170_usb_tx_data_complete, skb);
+
+ urb->transfer_flags |= URB_ZERO_PACKET;
+
+ usb_anchor_urb(urb, &ar->tx_wait);
+
+ usb_free_urb(urb);
+
+ carl9170_usb_submit_data_urb(ar);
+ return;
+
+err_drop:
+ carl9170_tx_drop(ar, skb);
+ carl9170_tx_callback(ar, skb);
+}
+
+static void carl9170_release_firmware(struct ar9170 *ar)
+{
+ if (ar->fw.fw) {
+ release_firmware(ar->fw.fw);
+ memset(&ar->fw, 0, sizeof(ar->fw));
+ }
+}
+
+void carl9170_usb_stop(struct ar9170 *ar)
+{
+ int ret;
+
+ carl9170_set_state_when(ar, CARL9170_IDLE, CARL9170_STOPPED);
+
+ ret = carl9170_usb_flush(ar);
+ if (ret)
+ dev_err(&ar->udev->dev, "kill pending tx urbs.\n");
+
+ usb_poison_anchored_urbs(&ar->tx_anch);
+ carl9170_usb_handle_tx_err(ar);
+
+ /* kill any pending command */
+ spin_lock_bh(&ar->cmd_lock);
+ ar->readlen = 0;
+ spin_unlock_bh(&ar->cmd_lock);
+ complete_all(&ar->cmd_wait);
+
+ /* This is required to prevent an early completion on _start */
+ INIT_COMPLETION(ar->cmd_wait);
+
+ /*
+ * Note:
+ * So far we freed all tx urbs, but we won't dare to touch any rx urbs.
+ * Else we would end up with a unresponsive device...
+ */
+}
+
+int carl9170_usb_open(struct ar9170 *ar)
+{
+ usb_unpoison_anchored_urbs(&ar->tx_anch);
+
+ carl9170_set_state_when(ar, CARL9170_STOPPED, CARL9170_IDLE);
+ return 0;
+}
+
+static int carl9170_usb_load_firmware(struct ar9170 *ar)
+{
+ const u8 *data;
+ u8 *buf;
+ unsigned int transfer;
+ size_t len;
+ u32 addr;
+ int err = 0;
+
+ buf = kmalloc(4096, GFP_KERNEL);
+ if (!buf) {
+ err = -ENOMEM;
+ goto err_out;
+ }
+
+ data = ar->fw.fw->data;
+ len = ar->fw.fw->size;
+ addr = ar->fw.address;
+
+ /* this removes the miniboot image */
+ data += ar->fw.offset;
+ len -= ar->fw.offset;
+
+ while (len) {
+ transfer = min_t(unsigned int, len, 4096u);
+ memcpy(buf, data, transfer);
+
+ err = usb_control_msg(ar->udev, usb_sndctrlpipe(ar->udev, 0),
+ 0x30 /* FW DL */, 0x40 | USB_DIR_OUT,
+ addr >> 8, 0, buf, transfer, 100);
+
+ if (err < 0) {
+ kfree(buf);
+ goto err_out;
+ }
+
+ len -= transfer;
+ data += transfer;
+ addr += transfer;
+ }
+ kfree(buf);
+
+ err = usb_control_msg(ar->udev, usb_sndctrlpipe(ar->udev, 0),
+ 0x31 /* FW DL COMPLETE */,
+ 0x40 | USB_DIR_OUT, 0, 0, NULL, 0, 200);
+
+ if (wait_for_completion_timeout(&ar->fw_boot_wait, HZ) == 0) {
+ err = -ETIMEDOUT;
+ goto err_out;
+ }
+
+ err = carl9170_echo_test(ar, 0x4a110123);
+ if (err)
+ goto err_out;
+
+ /* firmware restarts cmd counter */
+ ar->cmd_seq = -1;
+
+ return 0;
+
+err_out:
+ dev_err(&ar->udev->dev, "firmware upload failed (%d).\n", err);
+ return err;
+}
+
+int carl9170_usb_restart(struct ar9170 *ar)
+{
+ int err = 0;
+
+ if (ar->intf->condition != USB_INTERFACE_BOUND)
+ return 0;
+
+ /* Disable command response sequence counter. */
+ ar->cmd_seq = -2;
+
+ err = carl9170_reboot(ar);
+
+ carl9170_usb_stop(ar);
+
+ carl9170_set_state(ar, CARL9170_UNKNOWN_STATE);
+
+ if (err)
+ goto err_out;
+
+ tasklet_schedule(&ar->usb_tasklet);
+
+ /* The reboot procedure can take quite a while to complete. */
+ msleep(1100);
+
+ err = carl9170_usb_open(ar);
+ if (err)
+ goto err_out;
+
+ err = carl9170_usb_load_firmware(ar);
+ if (err)
+ goto err_out;
+
+ return 0;
+
+err_out:
+ carl9170_usb_cancel_urbs(ar);
+ return err;
+}
+
+void carl9170_usb_reset(struct ar9170 *ar)
+{
+ /*
+ * This is the last resort to get the device going again
+ * without any *user replugging action*.
+ *
+ * But there is a catch: usb_reset really is like a physical
+ * *reconnect*. The mac80211 state will be lost in the process.
+ * Therefore a userspace application, which is monitoring
+ * the link must step in.
+ */
+ carl9170_usb_cancel_urbs(ar);
+
+ carl9170_usb_stop(ar);
+
+ usb_queue_reset_device(ar->intf);
+}
+
+static int carl9170_usb_init_device(struct ar9170 *ar)
+{
+ int err;
+
+ err = carl9170_usb_send_rx_irq_urb(ar);
+ if (err)
+ goto err_out;
+
+ err = carl9170_usb_init_rx_bulk_urbs(ar);
+ if (err)
+ goto err_unrx;
+
+ mutex_lock(&ar->mutex);
+ err = carl9170_usb_load_firmware(ar);
+ mutex_unlock(&ar->mutex);
+ if (err)
+ goto err_unrx;
+
+ return 0;
+
+err_unrx:
+ carl9170_usb_cancel_urbs(ar);
+
+err_out:
+ return err;
+}
+
+static void carl9170_usb_firmware_failed(struct ar9170 *ar)
+{
+ struct device *parent = ar->udev->dev.parent;
+ struct usb_device *udev;
+
+ /*
+ * Store a copy of the usb_device pointer locally.
+ * This is because device_release_driver initiates
+ * carl9170_usb_disconnect, which in turn frees our
+ * driver context (ar).
+ */
+ udev = ar->udev;
+
+ complete(&ar->fw_load_wait);
+
+ /* unbind anything failed */
+ if (parent)
+ device_lock(parent);
+
+ device_release_driver(&udev->dev);
+ if (parent)
+ device_unlock(parent);
+
+ usb_put_dev(udev);
+}
+
+static void carl9170_usb_firmware_finish(struct ar9170 *ar)
+{
+ int err;
+
+ err = carl9170_parse_firmware(ar);
+ if (err)
+ goto err_freefw;
+
+ err = carl9170_usb_init_device(ar);
+ if (err)
+ goto err_freefw;
+
+ err = carl9170_usb_open(ar);
+ if (err)
+ goto err_unrx;
+
+ err = carl9170_register(ar);
+
+ carl9170_usb_stop(ar);
+ if (err)
+ goto err_unrx;
+
+ complete(&ar->fw_load_wait);
+ usb_put_dev(ar->udev);
+ return;
+
+err_unrx:
+ carl9170_usb_cancel_urbs(ar);
+
+err_freefw:
+ carl9170_release_firmware(ar);
+ carl9170_usb_firmware_failed(ar);
+}
+
+static void carl9170_usb_firmware_step2(const struct firmware *fw,
+ void *context)
+{
+ struct ar9170 *ar = context;
+
+ if (fw) {
+ ar->fw.fw = fw;
+ carl9170_usb_firmware_finish(ar);
+ return;
+ }
+
+ dev_err(&ar->udev->dev, "firmware not found.\n");
+ carl9170_usb_firmware_failed(ar);
+}
+
+static int carl9170_usb_probe(struct usb_interface *intf,
+ const struct usb_device_id *id)
+{
+ struct ar9170 *ar;
+ struct usb_device *udev;
+ int err;
+
+ err = usb_reset_device(interface_to_usbdev(intf));
+ if (err)
+ return err;
+
+ ar = carl9170_alloc(sizeof(*ar));
+ if (IS_ERR(ar))
+ return PTR_ERR(ar);
+
+ udev = interface_to_usbdev(intf);
+ usb_get_dev(udev);
+ ar->udev = udev;
+ ar->intf = intf;
+ ar->features = id->driver_info;
+
+ usb_set_intfdata(intf, ar);
+ SET_IEEE80211_DEV(ar->hw, &intf->dev);
+
+ init_usb_anchor(&ar->rx_anch);
+ init_usb_anchor(&ar->rx_pool);
+ init_usb_anchor(&ar->rx_work);
+ init_usb_anchor(&ar->tx_wait);
+ init_usb_anchor(&ar->tx_anch);
+ init_usb_anchor(&ar->tx_cmd);
+ init_usb_anchor(&ar->tx_err);
+ init_completion(&ar->cmd_wait);
+ init_completion(&ar->fw_boot_wait);
+ init_completion(&ar->fw_load_wait);
+ tasklet_init(&ar->usb_tasklet, carl9170_usb_tasklet,
+ (unsigned long)ar);
+
+ atomic_set(&ar->tx_cmd_urbs, 0);
+ atomic_set(&ar->tx_anch_urbs, 0);
+ atomic_set(&ar->rx_work_urbs, 0);
+ atomic_set(&ar->rx_anch_urbs, 0);
+ atomic_set(&ar->rx_pool_urbs, 0);
+ ar->cmd_seq = -2;
+
+ usb_get_dev(ar->udev);
+
+ carl9170_set_state(ar, CARL9170_STOPPED);
+
+ return request_firmware_nowait(THIS_MODULE, 1, CARL9170FW_NAME,
+ &ar->udev->dev, GFP_KERNEL, ar, carl9170_usb_firmware_step2);
+}
+
+static void carl9170_usb_disconnect(struct usb_interface *intf)
+{
+ struct ar9170 *ar = usb_get_intfdata(intf);
+ struct usb_device *udev;
+
+ if (WARN_ON(!ar))
+ return;
+
+ udev = ar->udev;
+ wait_for_completion(&ar->fw_load_wait);
+
+ if (IS_INITIALIZED(ar)) {
+ carl9170_reboot(ar);
+ carl9170_usb_stop(ar);
+ }
+
+ carl9170_usb_cancel_urbs(ar);
+ carl9170_unregister(ar);
+
+ usb_set_intfdata(intf, NULL);
+
+ carl9170_release_firmware(ar);
+ carl9170_free(ar);
+ usb_put_dev(udev);
+}
+
+#ifdef CONFIG_PM
+static int carl9170_usb_suspend(struct usb_interface *intf,
+ pm_message_t message)
+{
+ struct ar9170 *ar = usb_get_intfdata(intf);
+
+ if (!ar)
+ return -ENODEV;
+
+ carl9170_usb_cancel_urbs(ar);
+
+ /*
+ * firmware automatically reboots for usb suspend.
+ */
+
+ return 0;
+}
+
+static int carl9170_usb_resume(struct usb_interface *intf)
+{
+ struct ar9170 *ar = usb_get_intfdata(intf);
+ int err;
+
+ if (!ar)
+ return -ENODEV;
+
+ usb_unpoison_anchored_urbs(&ar->rx_anch);
+
+ err = carl9170_usb_init_device(ar);
+ if (err)
+ goto err_unrx;
+
+ err = carl9170_usb_open(ar);
+ if (err)
+ goto err_unrx;
+
+ return 0;
+
+err_unrx:
+ carl9170_usb_cancel_urbs(ar);
+
+ return err;
+}
+#endif /* CONFIG_PM */
+
+static struct usb_driver carl9170_driver = {
+ .name = KBUILD_MODNAME,
+ .probe = carl9170_usb_probe,
+ .disconnect = carl9170_usb_disconnect,
+ .id_table = carl9170_usb_ids,
+ .soft_unbind = 1,
+#ifdef CONFIG_PM
+ .suspend = carl9170_usb_suspend,
+ .resume = carl9170_usb_resume,
+#endif /* CONFIG_PM */
+};
+
+static int __init carl9170_usb_init(void)
+{
+ return usb_register(&carl9170_driver);
+}
+
+static void __exit carl9170_usb_exit(void)
+{
+ usb_deregister(&carl9170_driver);
+}
+
+module_init(carl9170_usb_init);
+module_exit(carl9170_usb_exit);
git://bbs.cooldavid.org / net-next-2.6.git / commitdiff