UBI: introduce new constants

This patch is a clean-up and a preparation for the following
patches. It introduece constants for the return values of the
'ubi_eba_copy_leb()' function.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>

diff --git a/drivers/mtd/ubi/eba.c b/drivers/mtd/ubi/eba.c
index 25def348e5ba9f93324ce1f9765af5fcf17c7807..7ab79e247245e442f3df07770f9f42206d3abb7e 100644 (file)
--- a/drivers/mtd/ubi/eba.c
+++ b/drivers/mtd/ubi/eba.c
@@ -950,12 +950,7 @@ write_error:
  * physical eraseblock @to. The @vid_hdr buffer may be changed by this
  * function. Returns:
  *   o %0 in case of success;
- *   o %1 if the operation was canceled because the volume is being deleted
- *        or because the PEB was put meanwhile;
- *   o %2 if the operation was canceled because there was a write error to the
- *        target PEB;
- *   o %-EAGAIN if the operation was canceled because a bit-flip was detected
- *     in the target PEB;
+ *   o %MOVE_CANCEL_RACE, %MOVE_TARGET_WR_ERR, or %MOVE_CANCEL_BITFLIPS;
  *   o a negative error code in case of failure.
  */
 int ubi_eba_copy_leb(struct ubi_device *ubi, int from, int to,
@@ -986,13 +981,12 @@ int ubi_eba_copy_leb(struct ubi_device *ubi, int from, int to,
         * be locked in 'ubi_wl_put_peb()' and wait for the WL worker to finish.
         */
        vol = ubi->volumes[idx];
+       spin_unlock(&ubi->volumes_lock);
        if (!vol) {
                /* No need to do further work, cancel */
                dbg_eba("volume %d is being removed, cancel", vol_id);
-               spin_unlock(&ubi->volumes_lock);
-               return 1;
+               return MOVE_CANCEL_RACE;
        }
-       spin_unlock(&ubi->volumes_lock);
 
        /*
         * We do not want anybody to write to this logical eraseblock while we
@@ -1004,12 +998,13 @@ int ubi_eba_copy_leb(struct ubi_device *ubi, int from, int to,
         * (@from). This task locks the LEB and goes sleep in the
         * 'ubi_wl_put_peb()' function on the @ubi->move_mutex. In turn, we are
         * holding @ubi->move_mutex and go sleep on the LEB lock. So, if the
-        * LEB is already locked, we just do not move it and return %1.
+        * LEB is already locked, we just do not move it and return
+        * %MOVE_CANCEL_RACE, which means that UBI will re-try, but later.
         */
        err = leb_write_trylock(ubi, vol_id, lnum);
        if (err) {
                dbg_eba("contention on LEB %d:%d, cancel", vol_id, lnum);
-               return err;
+               return MOVE_CANCEL_RACE;
        }
 
        /*
@@ -1021,14 +1016,14 @@ int ubi_eba_copy_leb(struct ubi_device *ubi, int from, int to,
                dbg_eba("LEB %d:%d is no longer mapped to PEB %d, mapped to "
                        "PEB %d, cancel", vol_id, lnum, from,
                        vol->eba_tbl[lnum]);
-               err = 1;
+               err = MOVE_CANCEL_RACE;
                goto out_unlock_leb;
        }
 
        /*
         * OK, now the LEB is locked and we can safely start moving it. Since
-        * this function utilizes the @ubi->peb1_buf buffer which is shared
-        * with some other functions, so lock the buffer by taking the
+        * this function utilizes the @ubi->peb_buf1 buffer which is shared
+        * with some other functions - we lock the buffer by taking the
         * @ubi->buf_mutex.
         */
        mutex_lock(&ubi->buf_mutex);
@@ -1059,7 +1054,7 @@ int ubi_eba_copy_leb(struct ubi_device *ubi, int from, int to,
        cond_resched();
 
        /*
-        * It may turn out to me that the whole @from physical eraseblock
+        * It may turn out to be that the whole @from physical eraseblock
         * contains only 0xFF bytes. Then we have to only write the VID header
         * and do not write any data. This also means we should not set
         * @vid_hdr->copy_flag, @vid_hdr->data_size, and @vid_hdr->data_crc.
@@ -1074,7 +1069,7 @@ int ubi_eba_copy_leb(struct ubi_device *ubi, int from, int to,
        err = ubi_io_write_vid_hdr(ubi, to, vid_hdr);
        if (err) {
                if (err == -EIO)
-                       err = 2;
+                       err = MOVE_TARGET_WR_ERR;
                goto out_unlock_buf;
        }
 
@@ -1086,7 +1081,7 @@ int ubi_eba_copy_leb(struct ubi_device *ubi, int from, int to,
                if (err != UBI_IO_BITFLIPS)
                        ubi_warn("cannot read VID header back from PEB %d", to);
                else
-                       err = -EAGAIN;
+                       err = MOVE_CANCEL_BITFLIPS;
                goto out_unlock_buf;
        }
 
@@ -1094,7 +1089,7 @@ int ubi_eba_copy_leb(struct ubi_device *ubi, int from, int to,
                err = ubi_io_write_data(ubi, ubi->peb_buf1, to, 0, aldata_size);
                if (err) {
                        if (err == -EIO)
-                               err = 2;
+                               err = MOVE_TARGET_WR_ERR;
                        goto out_unlock_buf;
                }
 
@@ -1111,7 +1106,7 @@ int ubi_eba_copy_leb(struct ubi_device *ubi, int from, int to,
                                ubi_warn("cannot read data back from PEB %d",
                                         to);
                        else
-                               err = -EAGAIN;
+                               err = MOVE_CANCEL_BITFLIPS;
                        goto out_unlock_buf;
                }
 

diff --git a/drivers/mtd/ubi/ubi.h b/drivers/mtd/ubi/ubi.h
index 749007e9f1aae14edac974b56606fa381c22df39..fd9b20da5b6bfda29be9f278120d0ce83ea91ae7 100644 (file)
--- a/drivers/mtd/ubi/ubi.h
+++ b/drivers/mtd/ubi/ubi.h
@@ -100,6 +100,22 @@ enum {
        UBI_IO_BITFLIPS
 };
 
+/*
+ * Return codes of the 'ubi_eba_copy_leb()' function.
+ *
+ * MOVE_CANCEL_RACE: canceled because the volume is being deleted, the source
+ *                   PEB was put meanwhile, or there is I/O on the source PEB
+ * MOVE_TARGET_WR_ERR: canceled because there was a write error to the target
+ *                     PEB
+ * MOVE_CANCEL_BITFLIPS: canceled because a bit-flip was detected in the
+ *                       target PEB
+ */
+enum {
+       MOVE_CANCEL_RACE = 1,
+       MOVE_TARGET_WR_ERR,
+       MOVE_CANCEL_BITFLIPS,
+};
+
 /**
  * struct ubi_wl_entry - wear-leveling entry.
  * @u.rb: link in the corresponding (free/used) RB-tree

diff --git a/drivers/mtd/ubi/wl.c b/drivers/mtd/ubi/wl.c
index 891534f8210d595f2eea3a2b5d3a22e17facdce7..ec915c02301cdb9bbc8bba07839b5fbd00684260 100644 (file)
--- a/drivers/mtd/ubi/wl.c
+++ b/drivers/mtd/ubi/wl.c
@@ -756,15 +756,14 @@ static int wear_leveling_worker(struct ubi_device *ubi, struct ubi_work *wrk,
 
        err = ubi_eba_copy_leb(ubi, e1->pnum, e2->pnum, vid_hdr);
        if (err) {
-               if (err == -EAGAIN)
-                       goto out_not_moved;
-               if (err < 0)
-                       goto out_error;
-               if (err == 2) {
-                       /* Target PEB write error, torture it */
+               if (err == MOVE_CANCEL_BITFLIPS ||
+                   err == MOVE_TARGET_WR_ERR) {
+                       /* Target PEB bit-flips or write error, torture it */
                        torture = 1;
                        goto out_not_moved;
                }
+               if (err < 0)
+                       goto out_error;
 
                /*
                 * The LEB has not been moved because the volume is being
@@ -774,7 +773,7 @@ static int wear_leveling_worker(struct ubi_device *ubi, struct ubi_work *wrk,
                 */
 
                dbg_wl("canceled moving PEB %d", e1->pnum);
-               ubi_assert(err == 1);
+               ubi_assert(err == MOVE_CANCEL_RACE);
 
                ubi_free_vid_hdr(ubi, vid_hdr);
                vid_hdr = NULL;