* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev:
ata_generic: implement ATA_GEN_* flags and force enable DMA on MBP 7,1
ahci,ata_generic: let ata_generic handle new MBP w/ MCP89
libahci: Fix bug in storing EM messages
nowayout: Watchdog cannot be stopped once started
(default=kernel config parameter)
-------------------------------------------------
+imx2_wdt:
+timeout: Watchdog timeout in seconds (default 60 s)
+nowayout: Watchdog cannot be stopped once started
+ (default=kernel config parameter)
+-------------------------------------------------
indydog:
nowayout: Watchdog cannot be stopped once started
(default=kernel config parameter)
ARM/SAMSUNG ARM ARCHITECTURES
M: Ben Dooks <ben-linux@fluff.org>
+M: Kukjin Kim <kgene.kim@samsung.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
W: http://www.fluff.org/ben/linux/
S: Maintained
-F: arch/arm/plat-s3c/
+F: arch/arm/plat-samsung/
F: arch/arm/plat-s3c24xx/
+F: arch/arm/plat-s5p/
ARM/S3C2410 ARM ARCHITECTURE
M: Ben Dooks <ben-linux@fluff.org>
F: drivers/mmc/host/atmel-mci-regs.h
ATMEL AT91 / AT32 SERIAL DRIVER
-M: Haavard Skinnemoen <hskinnemoen@atmel.com>
+M: Nicolas Ferre <nicolas.ferre@atmel.com>
S: Supported
F: drivers/serial/atmel_serial.c
F: include/video/atmel_lcdc.h
ATMEL MACB ETHERNET DRIVER
-M: Haavard Skinnemoen <hskinnemoen@atmel.com>
+M: Nicolas Ferre <nicolas.ferre@atmel.com>
S: Supported
F: drivers/net/macb.*
ATMEL SPI DRIVER
-M: Haavard Skinnemoen <hskinnemoen@atmel.com>
+M: Nicolas Ferre <nicolas.ferre@atmel.com>
S: Supported
F: drivers/spi/atmel_spi.*
ATMEL USBA UDC DRIVER
-M: Haavard Skinnemoen <hskinnemoen@atmel.com>
-L: kernel@avr32linux.org
+M: Nicolas Ferre <nicolas.ferre@atmel.com>
+L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
W: http://avr32linux.org/twiki/bin/view/Main/AtmelUsbDeviceDriver
S: Supported
F: drivers/usb/gadget/atmel_usba_udc.*
M: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
M: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
M: "David S. Miller" <davem@davemloft.net>
-M: Masami Hiramatsu <mhiramat@redhat.com>
+M: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
S: Maintained
F: Documentation/kprobes.txt
F: include/linux/kprobes.h
L: rtc-linux@googlegroups.com
S: Maintained
+QLOGIC QLA1280 SCSI DRIVER
+M: Michael Reed <mdr@sgi.com>
+L: linux-scsi@vger.kernel.org
+S: Maintained
+F: drivers/scsi/qla1280.[ch]
+
QLOGIC QLA2XXX FC-SCSI DRIVER
M: Andrew Vasquez <andrew.vasquez@qlogic.com>
M: linux-driver@qlogic.com
printk(KERN_ERR "can't get ads7846 pen down GPIO\n");
gpio_direction_input(OMAP3_STALKER_TS_GPIO);
-
- omap_set_gpio_debounce(OMAP3_STALKER_TS_GPIO, 1);
- omap_set_gpio_debounce_time(OMAP3_STALKER_TS_GPIO, 0xa);
+ gpio_set_debounce(OMAP3_STALKER_TS_GPIO, 310);
}
static int ads7846_get_pendown_state(void)
.ops = &clkops_omap2_dflt,
.enable_reg = OMAP4430_CM_MEMIF_EMIF_1_CLKCTRL,
.enable_bit = OMAP4430_MODULEMODE_HWCTRL,
+ .flags = ENABLE_ON_INIT,
.clkdm_name = "l3_emif_clkdm",
.parent = &ddrphy_ck,
.recalc = &followparent_recalc,
.ops = &clkops_omap2_dflt,
.enable_reg = OMAP4430_CM_MEMIF_EMIF_2_CLKCTRL,
.enable_bit = OMAP4430_MODULEMODE_HWCTRL,
+ .flags = ENABLE_ON_INIT,
.clkdm_name = "l3_emif_clkdm",
.parent = &ddrphy_ck,
.recalc = &followparent_recalc,
return 0;
oh->_clk = omap_clk_get_by_name(oh->main_clk);
- if (!oh->_clk)
+ if (!oh->_clk) {
pr_warning("omap_hwmod: %s: cannot clk_get main_clk %s\n",
oh->name, oh->main_clk);
return -EINVAL;
+ }
if (!oh->_clk->clkdm)
pr_warning("omap_hwmod: %s: missing clockdomain for %s.\n",
continue;
c = omap_clk_get_by_name(os->clk);
- if (!c)
+ if (!c) {
pr_warning("omap_hwmod: %s: cannot clk_get interface_clk %s\n",
oh->name, os->clk);
ret = -EINVAL;
+ }
os->_clk = c;
}
for (i = oh->opt_clks_cnt, oc = oh->opt_clks; i > 0; i--, oc++) {
c = omap_clk_get_by_name(oc->clk);
- if (!c)
+ if (!c) {
pr_warning("omap_hwmod: %s: cannot clk_get opt_clk %s\n",
oh->name, oc->clk);
ret = -EINVAL;
+ }
oc->_clk = c;
}
/* Do a readback to assure write has been done */
prm_read_mod_reg(WKUP_MOD, PM_WKEN);
- while (!(prm_read_mod_reg(WKUP_MOD, PM_WKST) &
+ while (!(prm_read_mod_reg(WKUP_MOD, PM_WKEN) &
OMAP3430_ST_IO_CHAIN_MASK)) {
timeout++;
if (timeout > 1000) {
return;
}
prm_set_mod_reg_bits(OMAP3430_ST_IO_CHAIN_MASK,
- WKUP_MOD, PM_WKST);
+ WKUP_MOD, PM_WKEN);
}
}
}
#include <linux/delay.h>
#include <linux/platform_device.h>
#include <linux/clk.h>
+#include <linux/dma-mapping.h>
+
#include <asm/io.h>
#include <plat/mux.h>
* timer is stopped
*/
udelay(3500000 / clk_get_rate(timer->fclk) + 1);
- /* Ack possibly pending interrupt */
- omap_dm_timer_write_reg(timer, OMAP_TIMER_STAT_REG,
- OMAP_TIMER_INT_OVERFLOW);
#endif
}
+ /* Ack possibly pending interrupt */
+ omap_dm_timer_write_reg(timer, OMAP_TIMER_STAT_REG,
+ OMAP_TIMER_INT_OVERFLOW);
}
EXPORT_SYMBOL_GPL(omap_dm_timer_stop);
if (cpu_is_omap34xx() || cpu_is_omap44xx())
clk_disable(bank->dbck);
}
+ bank->dbck_enable_mask = val;
__raw_writel(val, reg);
}
return ERR_PTR(-ENOMEM);
err = sg_alloc_table(sgt, nr_entries, GFP_KERNEL);
- if (err)
+ if (err) {
+ kfree(sgt);
return ERR_PTR(err);
+ }
pr_debug("%s: sgt:%p(%d entries)\n", __func__, sgt, nr_entries);
ia64_invala();
for (;;) {
- asm volatile ("ld4.c.nc %0=[%1]" : "=r"(serve) : "r"(&ss->serve) : "memory");
+ asm volatile ("ld8.c.nc %0=[%1]" : "=r"(serve) : "r"(&ss->serve) : "memory");
if (time_before(t, serve))
return;
cpu_relax();
#include <errno.h>
#include <fcntl.h>
#include <string.h>
+#include <sys/stat.h>
#include <sys/mman.h>
#include <sys/param.h>
#include "init.h"
status = acpi_get_table(ACPI_SIG_ERST, 0,
(struct acpi_table_header **)&erst_tab);
if (status == AE_NOT_FOUND) {
- pr_err(ERST_PFX "Table is not found!\n");
+ pr_info(ERST_PFX "Table is not found!\n");
goto err;
} else if (ACPI_FAILURE(status)) {
const char *msg = acpi_format_exception(status);
void agp_alloc_page_array(size_t size, struct agp_memory *mem)
{
mem->pages = NULL;
- mem->vmalloc_flag = false;
if (size <= 2*PAGE_SIZE)
- mem->pages = kmalloc(size, GFP_KERNEL | __GFP_NORETRY);
+ mem->pages = kmalloc(size, GFP_KERNEL | __GFP_NOWARN);
if (mem->pages == NULL) {
mem->pages = vmalloc(size);
- mem->vmalloc_flag = true;
}
}
EXPORT_SYMBOL(agp_alloc_page_array);
void agp_free_page_array(struct agp_memory *mem)
{
- if (mem->vmalloc_flag) {
+ if (is_vmalloc_addr(mem->pages)) {
vfree(mem->pages);
} else {
kfree(mem->pages);
static int force_kipmid[SI_MAX_PARMS];
static int num_force_kipmid;
+#ifdef CONFIG_PCI
+static int pci_registered;
+#endif
+#ifdef CONFIG_PPC_OF
+static int of_registered;
+#endif
static unsigned int kipmid_max_busy_us[SI_MAX_PARMS];
static int num_max_busy_us;
else if (smi_result == SI_SM_IDLE)
schedule_timeout_interruptible(100);
else
- schedule_timeout_interruptible(0);
+ schedule_timeout_interruptible(1);
}
return 0;
}
rv = pci_register_driver(&ipmi_pci_driver);
if (rv)
printk(KERN_ERR PFX "Unable to register PCI driver: %d\n", rv);
+ else
+ pci_registered = 1;
#endif
#ifdef CONFIG_ACPI
#ifdef CONFIG_PPC_OF
of_register_platform_driver(&ipmi_of_platform_driver);
+ of_registered = 1;
#endif
/* We prefer devices with interrupts, but in the case of a machine
if (unload_when_empty && list_empty(&smi_infos)) {
mutex_unlock(&smi_infos_lock);
#ifdef CONFIG_PCI
- pci_unregister_driver(&ipmi_pci_driver);
+ if (pci_registered)
+ pci_unregister_driver(&ipmi_pci_driver);
#endif
#ifdef CONFIG_PPC_OF
- of_unregister_platform_driver(&ipmi_of_platform_driver);
+ if (of_registered)
+ of_unregister_platform_driver(&ipmi_of_platform_driver);
#endif
driver_unregister(&ipmi_driver.driver);
printk(KERN_WARNING PFX
return;
#ifdef CONFIG_PCI
- pci_unregister_driver(&ipmi_pci_driver);
+ if (pci_registered)
+ pci_unregister_driver(&ipmi_pci_driver);
#endif
#ifdef CONFIG_ACPI
pnp_unregister_driver(&ipmi_pnp_driver);
#endif
#ifdef CONFIG_PPC_OF
- of_unregister_platform_driver(&ipmi_of_platform_driver);
+ if (of_registered)
+ of_unregister_platform_driver(&ipmi_of_platform_driver);
#endif
mutex_lock(&smi_infos_lock);
#
-# GPIO infrastructure and expanders
+# platform-neutral GPIO infrastructure and expanders
#
config ARCH_WANT_OPTIONAL_GPIOLIB
-# gpio support: dedicated expander chips, etc
+# generic gpio support: dedicated expander chips, etc
+#
+# NOTE: platform-specific GPIO drivers don't belong in the
+# drivers/gpio directory; put them with other platform setup
+# code, IRQ controllers, board init, etc.
ccflags-$(CONFIG_DEBUG_GPIO) += -DDEBUG
cvt = 1;
break;
case 'R':
- if (!cvt)
+ if (cvt)
rb = 1;
break;
case 'm':
}
create_mode:
- mode = drm_cvt_mode(fb_helper_conn->connector->dev, cmdline_mode->xres,
- cmdline_mode->yres,
- cmdline_mode->refresh_specified ? cmdline_mode->refresh : 60,
- cmdline_mode->rb, cmdline_mode->interlace,
- cmdline_mode->margins);
+ if (cmdline_mode->cvt)
+ mode = drm_cvt_mode(fb_helper_conn->connector->dev,
+ cmdline_mode->xres, cmdline_mode->yres,
+ cmdline_mode->refresh_specified ? cmdline_mode->refresh : 60,
+ cmdline_mode->rb, cmdline_mode->interlace,
+ cmdline_mode->margins);
+ else
+ mode = drm_gtf_mode(fb_helper_conn->connector->dev,
+ cmdline_mode->xres, cmdline_mode->yres,
+ cmdline_mode->refresh_specified ? cmdline_mode->refresh : 60,
+ cmdline_mode->interlace,
+ cmdline_mode->margins);
drm_mode_set_crtcinfo(mode, CRTC_INTERLACE_HALVE_V);
list_add(&mode->head, &fb_helper_conn->connector->modes);
return mode;
mapping = inode->i_mapping;
for (i = 0; i < page_count; i++) {
page = read_cache_page_gfp(mapping, i,
- mapping_gfp_mask (mapping) |
+ GFP_HIGHUSER |
__GFP_COLD |
gfpmask);
if (IS_ERR(page))
if ((rdev->family == CHIP_RS600) ||
(rdev->family == CHIP_RS690) ||
(rdev->family == CHIP_RS740))
- pll->flags |= (RADEON_PLL_USE_FRAC_FB_DIV |
+ pll->flags |= (/*RADEON_PLL_USE_FRAC_FB_DIV |*/
RADEON_PLL_PREFER_CLOSEST_LOWER);
if (ASIC_IS_DCE32(rdev) && mode->clock > 200000) /* range limits??? */
WREG32(MC_VM_FB_LOCATION, tmp);
WREG32(HDP_NONSURFACE_BASE, (rdev->mc.vram_start >> 8));
WREG32(HDP_NONSURFACE_INFO, (2 << 7));
- WREG32(HDP_NONSURFACE_SIZE, (rdev->mc.mc_vram_size - 1) | 0x3FF);
+ WREG32(HDP_NONSURFACE_SIZE, 0x3FFFFFFF);
if (rdev->flags & RADEON_IS_AGP) {
WREG32(MC_VM_AGP_TOP, rdev->mc.gtt_end >> 16);
WREG32(MC_VM_AGP_BOT, rdev->mc.gtt_start >> 16);
ps_thread_count = 128;
sq_thread_resource_mgmt = NUM_PS_THREADS(ps_thread_count);
- sq_thread_resource_mgmt |= NUM_VS_THREADS(((rdev->config.evergreen.max_threads - ps_thread_count) / 6) / 8) * 8;
- sq_thread_resource_mgmt |= NUM_GS_THREADS(((rdev->config.evergreen.max_threads - ps_thread_count) / 6) / 8) * 8;
- sq_thread_resource_mgmt |= NUM_ES_THREADS(((rdev->config.evergreen.max_threads - ps_thread_count) / 6) / 8) * 8;
- sq_thread_resource_mgmt_2 = NUM_HS_THREADS(((rdev->config.evergreen.max_threads - ps_thread_count) / 6) / 8) * 8;
- sq_thread_resource_mgmt_2 |= NUM_LS_THREADS(((rdev->config.evergreen.max_threads - ps_thread_count) / 6) / 8) * 8;
+ sq_thread_resource_mgmt |= NUM_VS_THREADS((((rdev->config.evergreen.max_threads - ps_thread_count) / 6) / 8) * 8);
+ sq_thread_resource_mgmt |= NUM_GS_THREADS((((rdev->config.evergreen.max_threads - ps_thread_count) / 6) / 8) * 8);
+ sq_thread_resource_mgmt |= NUM_ES_THREADS((((rdev->config.evergreen.max_threads - ps_thread_count) / 6) / 8) * 8);
+ sq_thread_resource_mgmt_2 = NUM_HS_THREADS((((rdev->config.evergreen.max_threads - ps_thread_count) / 6) / 8) * 8);
+ sq_thread_resource_mgmt_2 |= NUM_LS_THREADS((((rdev->config.evergreen.max_threads - ps_thread_count) / 6) / 8) * 8);
sq_stack_resource_mgmt_1 = NUM_PS_STACK_ENTRIES((rdev->config.evergreen.max_stack_entries * 1) / 6);
sq_stack_resource_mgmt_1 |= NUM_VS_STACK_ENTRIES((rdev->config.evergreen.max_stack_entries * 1) / 6);
WREG32(VGT_GS_VERTEX_REUSE, 16);
WREG32(PA_SC_LINE_STIPPLE_STATE, 0);
+ WREG32(VGT_VERTEX_REUSE_BLOCK_CNTL, 14);
+ WREG32(VGT_OUT_DEALLOC_CNTL, 16);
+
WREG32(CB_PERF_CTR0_SEL_0, 0);
WREG32(CB_PERF_CTR0_SEL_1, 0);
WREG32(CB_PERF_CTR1_SEL_0, 0);
WREG32(CB_PERF_CTR3_SEL_0, 0);
WREG32(CB_PERF_CTR3_SEL_1, 0);
+ /* clear render buffer base addresses */
+ WREG32(CB_COLOR0_BASE, 0);
+ WREG32(CB_COLOR1_BASE, 0);
+ WREG32(CB_COLOR2_BASE, 0);
+ WREG32(CB_COLOR3_BASE, 0);
+ WREG32(CB_COLOR4_BASE, 0);
+ WREG32(CB_COLOR5_BASE, 0);
+ WREG32(CB_COLOR6_BASE, 0);
+ WREG32(CB_COLOR7_BASE, 0);
+ WREG32(CB_COLOR8_BASE, 0);
+ WREG32(CB_COLOR9_BASE, 0);
+ WREG32(CB_COLOR10_BASE, 0);
+ WREG32(CB_COLOR11_BASE, 0);
+
+ /* set the shader const cache sizes to 0 */
+ for (i = SQ_ALU_CONST_BUFFER_SIZE_PS_0; i < 0x28200; i += 4)
+ WREG32(i, 0);
+ for (i = SQ_ALU_CONST_BUFFER_SIZE_HS_0; i < 0x29000; i += 4)
+ WREG32(i, 0);
+
hdp_host_path_cntl = RREG32(HDP_HOST_PATH_CNTL);
WREG32(HDP_HOST_PATH_CNTL, hdp_host_path_cntl);
DRM_ERROR("bad SET_RESOURCE (tex)\n");
return -EINVAL;
}
- ib[idx+1+(i*8)+3] += (u32)((reloc->lobj.gpu_offset >> 8) & 0xffffffff);
+ ib[idx+1+(i*8)+2] += (u32)((reloc->lobj.gpu_offset >> 8) & 0xffffffff);
if (reloc->lobj.tiling_flags & RADEON_TILING_MACRO)
ib[idx+1+(i*8)+1] |= TEX_ARRAY_MODE(ARRAY_2D_TILED_THIN1);
else if (reloc->lobj.tiling_flags & RADEON_TILING_MICRO)
DRM_ERROR("bad SET_RESOURCE (tex)\n");
return -EINVAL;
}
- ib[idx+1+(i*8)+4] += (u32)((reloc->lobj.gpu_offset >> 8) & 0xffffffff);
+ ib[idx+1+(i*8)+3] += (u32)((reloc->lobj.gpu_offset >> 8) & 0xffffffff);
mipmap = reloc->robj;
r = evergreen_check_texture_resource(p, idx+1+(i*8),
texture, mipmap);
#define SQ_GSVS_RING_OFFSET_2 0x28930
#define SQ_GSVS_RING_OFFSET_3 0x28934
+#define SQ_ALU_CONST_BUFFER_SIZE_PS_0 0x28140
+#define SQ_ALU_CONST_BUFFER_SIZE_HS_0 0x28f80
+
#define SQ_ALU_CONST_CACHE_PS_0 0x28940
#define SQ_ALU_CONST_CACHE_PS_1 0x28944
#define SQ_ALU_CONST_CACHE_PS_2 0x28948
case RADEON_TXFORMAT_RGB332:
case RADEON_TXFORMAT_Y8:
track->textures[i].cpp = 1;
+ track->textures[i].compress_format = R100_TRACK_COMP_NONE;
break;
case RADEON_TXFORMAT_AI88:
case RADEON_TXFORMAT_ARGB1555:
case RADEON_TXFORMAT_LDUDV655:
case RADEON_TXFORMAT_DUDV88:
track->textures[i].cpp = 2;
+ track->textures[i].compress_format = R100_TRACK_COMP_NONE;
break;
case RADEON_TXFORMAT_ARGB8888:
case RADEON_TXFORMAT_RGBA8888:
case RADEON_TXFORMAT_SHADOW32:
case RADEON_TXFORMAT_LDUDUV8888:
track->textures[i].cpp = 4;
+ track->textures[i].compress_format = R100_TRACK_COMP_NONE;
break;
case RADEON_TXFORMAT_DXT1:
track->textures[i].cpp = 1;
int surf_index = reg * 16;
int flags = 0;
- /* r100/r200 divide by 16 */
- if (rdev->family < CHIP_R300)
- flags = pitch / 16;
- else
- flags = pitch / 8;
-
if (rdev->family <= CHIP_RS200) {
if ((tiling_flags & (RADEON_TILING_MACRO|RADEON_TILING_MICRO))
== (RADEON_TILING_MACRO|RADEON_TILING_MICRO))
if (tiling_flags & RADEON_TILING_SWAP_32BIT)
flags |= RADEON_SURF_AP0_SWP_32BPP | RADEON_SURF_AP1_SWP_32BPP;
+ /* when we aren't tiling the pitch seems to needs to be furtherdivided down. - tested on power5 + rn50 server */
+ if (tiling_flags & (RADEON_TILING_SWAP_16BIT | RADEON_TILING_SWAP_32BIT)) {
+ if (!(tiling_flags & (RADEON_TILING_MACRO | RADEON_TILING_MICRO)))
+ if (ASIC_IS_RN50(rdev))
+ pitch /= 16;
+ }
+
+ /* r100/r200 divide by 16 */
+ if (rdev->family < CHIP_R300)
+ flags |= pitch / 16;
+ else
+ flags |= pitch / 8;
+
+
DRM_DEBUG("writing surface %d %d %x %x\n", reg, flags, offset, offset+obj_size-1);
WREG32(RADEON_SURFACE0_INFO + surf_index, flags);
WREG32(RADEON_SURFACE0_LOWER_BOUND + surf_index, offset);
DRM_ERROR("compress format %d\n", t->compress_format);
}
-static int r100_cs_track_cube(struct radeon_device *rdev,
- struct r100_cs_track *track, unsigned idx)
-{
- unsigned face, w, h;
- struct radeon_bo *cube_robj;
- unsigned long size;
-
- for (face = 0; face < 5; face++) {
- cube_robj = track->textures[idx].cube_info[face].robj;
- w = track->textures[idx].cube_info[face].width;
- h = track->textures[idx].cube_info[face].height;
-
- size = w * h;
- size *= track->textures[idx].cpp;
-
- size += track->textures[idx].cube_info[face].offset;
-
- if (size > radeon_bo_size(cube_robj)) {
- DRM_ERROR("Cube texture offset greater than object size %lu %lu\n",
- size, radeon_bo_size(cube_robj));
- r100_cs_track_texture_print(&track->textures[idx]);
- return -1;
- }
- }
- return 0;
-}
-
static int r100_track_compress_size(int compress_format, int w, int h)
{
int block_width, block_height, block_bytes;
return sz;
}
+static int r100_cs_track_cube(struct radeon_device *rdev,
+ struct r100_cs_track *track, unsigned idx)
+{
+ unsigned face, w, h;
+ struct radeon_bo *cube_robj;
+ unsigned long size;
+ unsigned compress_format = track->textures[idx].compress_format;
+
+ for (face = 0; face < 5; face++) {
+ cube_robj = track->textures[idx].cube_info[face].robj;
+ w = track->textures[idx].cube_info[face].width;
+ h = track->textures[idx].cube_info[face].height;
+
+ if (compress_format) {
+ size = r100_track_compress_size(compress_format, w, h);
+ } else
+ size = w * h;
+ size *= track->textures[idx].cpp;
+
+ size += track->textures[idx].cube_info[face].offset;
+
+ if (size > radeon_bo_size(cube_robj)) {
+ DRM_ERROR("Cube texture offset greater than object size %lu %lu\n",
+ size, radeon_bo_size(cube_robj));
+ r100_cs_track_texture_print(&track->textures[idx]);
+ return -1;
+ }
+ }
+ return 0;
+}
+
static int r100_cs_track_texture_check(struct radeon_device *rdev,
struct r100_cs_track *track)
{
/* 2D, 3D, CUBE */
switch (tmp) {
case 0:
+ case 3:
+ case 4:
case 5:
case 6:
case 7:
case R200_TXFORMAT_RGB332:
case R200_TXFORMAT_Y8:
track->textures[i].cpp = 1;
+ track->textures[i].compress_format = R100_TRACK_COMP_NONE;
break;
case R200_TXFORMAT_AI88:
case R200_TXFORMAT_ARGB1555:
case R200_TXFORMAT_DVDU88:
case R200_TXFORMAT_AVYU4444:
track->textures[i].cpp = 2;
+ track->textures[i].compress_format = R100_TRACK_COMP_NONE;
break;
case R200_TXFORMAT_ARGB8888:
case R200_TXFORMAT_RGBA8888:
case R200_TXFORMAT_BGR111110:
case R200_TXFORMAT_LDVDU8888:
track->textures[i].cpp = 4;
+ track->textures[i].compress_format = R100_TRACK_COMP_NONE;
break;
case R200_TXFORMAT_DXT1:
track->textures[i].cpp = 1;
case R300_TX_FORMAT_Y4X4:
case R300_TX_FORMAT_Z3Y3X2:
track->textures[i].cpp = 1;
+ track->textures[i].compress_format = R100_TRACK_COMP_NONE;
break;
case R300_TX_FORMAT_X16:
case R300_TX_FORMAT_Y8X8:
case R300_TX_FORMAT_B8G8_B8G8:
case R300_TX_FORMAT_G8R8_G8B8:
track->textures[i].cpp = 2;
+ track->textures[i].compress_format = R100_TRACK_COMP_NONE;
break;
case R300_TX_FORMAT_Y16X16:
case R300_TX_FORMAT_Z11Y11X10:
case R300_TX_FORMAT_FL_I32:
case 0x1e:
track->textures[i].cpp = 4;
+ track->textures[i].compress_format = R100_TRACK_COMP_NONE;
break;
case R300_TX_FORMAT_W16Z16Y16X16:
case R300_TX_FORMAT_FL_R16G16B16A16:
case R300_TX_FORMAT_FL_I32A32:
track->textures[i].cpp = 8;
+ track->textures[i].compress_format = R100_TRACK_COMP_NONE;
break;
case R300_TX_FORMAT_FL_R32G32B32A32:
track->textures[i].cpp = 16;
+ track->textures[i].compress_format = R100_TRACK_COMP_NONE;
break;
case R300_TX_FORMAT_DXT1:
track->textures[i].cpp = 1;
break;
}
}
- } else
- rdev->pm.requested_power_state_index =
- rdev->pm.current_power_state_index - 1;
+ } else {
+ if (rdev->pm.current_power_state_index == 0)
+ rdev->pm.requested_power_state_index =
+ rdev->pm.num_power_states - 1;
+ else
+ rdev->pm.requested_power_state_index =
+ rdev->pm.current_power_state_index - 1;
+ }
}
rdev->pm.requested_clock_mode_index = 0;
/* don't use the power state if crtcs are active and no display flag is set */
WREG32(MC_VM_FB_LOCATION, tmp);
WREG32(HDP_NONSURFACE_BASE, (rdev->mc.vram_start >> 8));
WREG32(HDP_NONSURFACE_INFO, (2 << 7));
- WREG32(HDP_NONSURFACE_SIZE, rdev->mc.mc_vram_size | 0x3FF);
+ WREG32(HDP_NONSURFACE_SIZE, 0x3FFFFFFF);
if (rdev->flags & RADEON_IS_AGP) {
WREG32(MC_VM_AGP_TOP, rdev->mc.gtt_end >> 22);
WREG32(MC_VM_AGP_BOT, rdev->mc.gtt_start >> 22);
rdev->mc.visible_vram_size = rdev->mc.aper_size;
r600_vram_gtt_location(rdev, &rdev->mc);
- if (rdev->flags & RADEON_IS_IGP)
+ if (rdev->flags & RADEON_IS_IGP) {
+ rs690_pm_info(rdev);
rdev->mc.igp_sideport_enabled = radeon_atombios_sideport_present(rdev);
+ }
radeon_update_bandwidth_info(rdev);
return 0;
}
void radeon_combios_get_power_modes(struct radeon_device *rdev);
void radeon_atombios_get_power_modes(struct radeon_device *rdev);
void radeon_atom_set_voltage(struct radeon_device *rdev, u16 level);
+void rs690_pm_info(struct radeon_device *rdev);
/*
* Fences.
DYNPM_STATE_DISABLED,
DYNPM_STATE_MINIMUM,
DYNPM_STATE_PAUSED,
- DYNPM_STATE_ACTIVE
+ DYNPM_STATE_ACTIVE,
+ DYNPM_STATE_SUSPENDED,
};
enum radeon_dynpm_action {
DYNPM_ACTION_NONE,
case CHIP_R423:
case CHIP_RV410:
rdev->asic = &r420_asic;
+ /* handle macs */
+ if (rdev->bios == NULL) {
+ rdev->asic->get_engine_clock = &radeon_legacy_get_engine_clock;
+ rdev->asic->set_engine_clock = &radeon_legacy_set_engine_clock;
+ rdev->asic->get_memory_clock = &radeon_legacy_get_memory_clock;
+ rdev->asic->set_memory_clock = NULL;
+ }
break;
case CHIP_RS400:
case CHIP_RS480:
resource_size_t vram_base;
resource_size_t size = 256 * 1024; /* ??? */
+ if (!(rdev->flags & RADEON_IS_IGP))
+ if (!radeon_card_posted(rdev))
+ return false;
+
rdev->bios = NULL;
vram_base = drm_get_resource_start(rdev->ddev, 0);
bios = ioremap(vram_base, size);
rdev->mode_info.connector_table = CT_IMAC_G5_ISIGHT;
} else
#endif /* CONFIG_PPC_PMAC */
+#ifdef CONFIG_PPC64
+ if (ASIC_IS_RN50(rdev))
+ rdev->mode_info.connector_table = CT_RN50_POWER;
+ else
+#endif
rdev->mode_info.connector_table = CT_GENERIC;
}
CONNECTOR_OBJECT_ID_SVIDEO,
&hpd);
break;
+ case CT_RN50_POWER:
+ DRM_INFO("Connector Table: %d (rn50-power)\n",
+ rdev->mode_info.connector_table);
+ /* VGA - primary dac */
+ ddc_i2c = combios_setup_i2c_bus(rdev, RADEON_GPIO_VGA_DDC);
+ hpd.hpd = RADEON_HPD_NONE;
+ radeon_add_legacy_encoder(dev,
+ radeon_get_encoder_id(dev,
+ ATOM_DEVICE_CRT1_SUPPORT,
+ 1),
+ ATOM_DEVICE_CRT1_SUPPORT);
+ radeon_add_legacy_connector(dev, 0, ATOM_DEVICE_CRT1_SUPPORT,
+ DRM_MODE_CONNECTOR_VGA, &ddc_i2c,
+ CONNECTOR_OBJECT_ID_VGA,
+ &hpd);
+ ddc_i2c = combios_setup_i2c_bus(rdev, RADEON_GPIO_CRT2_DDC);
+ hpd.hpd = RADEON_HPD_NONE;
+ radeon_add_legacy_encoder(dev,
+ radeon_get_encoder_id(dev,
+ ATOM_DEVICE_CRT2_SUPPORT,
+ 2),
+ ATOM_DEVICE_CRT2_SUPPORT);
+ radeon_add_legacy_connector(dev, 1, ATOM_DEVICE_CRT2_SUPPORT,
+ DRM_MODE_CONNECTOR_VGA, &ddc_i2c,
+ CONNECTOR_OBJECT_ID_VGA,
+ &hpd);
+ break;
default:
DRM_INFO("Connector table: %d (invalid)\n",
rdev->mode_info.connector_table);
return false;
}
- /* Some RV100 cards with 2 VGA ports show up with DVI+VGA */
- if (dev->pdev->device == 0x5159 &&
- dev->pdev->subsystem_vendor == 0x1002 &&
- dev->pdev->subsystem_device == 0x013a) {
- if (*legacy_connector == CONNECTOR_DVI_I_LEGACY)
- *legacy_connector = CONNECTOR_CRT_LEGACY;
-
- }
-
/* X300 card with extra non-existent DVI port */
if (dev->pdev->device == 0x5B60 &&
dev->pdev->subsystem_vendor == 0x17af &&
combios_write_ram_size(dev);
}
+ /* quirk for rs4xx HP nx6125 laptop to make it resume
+ * - it hangs on resume inside the dynclk 1 table.
+ */
+ if (rdev->family == CHIP_RS480 &&
+ rdev->pdev->subsystem_vendor == 0x103c &&
+ rdev->pdev->subsystem_device == 0x308b)
+ return;
+
/* DYN CLK 1 */
table = combios_get_table_offset(dev, COMBIOS_DYN_CLK_1_TABLE);
if (table)
fail:
drm_gem_object_unreference_unlocked(obj);
- return 0;
+ return ret;
}
int radeon_crtc_cursor_move(struct drm_crtc *crtc,
int radeon_resume_kms(struct drm_device *dev)
{
+ struct drm_connector *connector;
struct radeon_device *rdev = dev->dev_private;
if (rdev->powered_down)
radeon_resume(rdev);
radeon_pm_resume(rdev);
radeon_restore_bios_scratch_regs(rdev);
+
+ /* turn on display hw */
+ list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
+ drm_helper_connector_dpms(connector, DRM_MODE_DPMS_ON);
+ }
+
radeon_fbdev_set_suspend(rdev, 0);
release_console_sem();
if (is_dig) {
switch (mode) {
case DRM_MODE_DPMS_ON:
+ if (!ASIC_IS_DCE4(rdev))
+ atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_ENABLE_OUTPUT, 0, 0);
if (atombios_get_encoder_mode(encoder) == ATOM_ENCODER_MODE_DP) {
struct drm_connector *connector = radeon_get_connector_for_encoder(encoder);
if (ASIC_IS_DCE4(rdev))
atombios_dig_encoder_setup(encoder, ATOM_ENCODER_CMD_DP_VIDEO_ON);
}
- if (!ASIC_IS_DCE4(rdev))
- atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_ENABLE_OUTPUT, 0, 0);
break;
case DRM_MODE_DPMS_STANDBY:
case DRM_MODE_DPMS_SUSPEND:
if (ASIC_IS_R300(rdev)) {
gpiopad_a = RREG32(RADEON_GPIOPAD_A) | 1;
disp_output_cntl = RREG32(RADEON_DISP_OUTPUT_CNTL);
- }
-
- if (rdev->family == CHIP_R200 || ASIC_IS_R300(rdev))
- disp_tv_out_cntl = RREG32(RADEON_DISP_TV_OUT_CNTL);
- else
+ } else if (rdev->family != CHIP_R200)
disp_hw_debug = RREG32(RADEON_DISP_HW_DEBUG);
-
- if (rdev->family == CHIP_R200)
+ else if (rdev->family == CHIP_R200)
fp2_gen_cntl = RREG32(RADEON_FP2_GEN_CNTL);
+ if (rdev->family >= CHIP_R200)
+ disp_tv_out_cntl = RREG32(RADEON_DISP_TV_OUT_CNTL);
+
if (is_tv) {
uint32_t dac_cntl;
if (ASIC_IS_R300(rdev)) {
WREG32_P(RADEON_GPIOPAD_A, gpiopad_a, ~1);
WREG32(RADEON_DISP_OUTPUT_CNTL, disp_output_cntl);
- }
+ } else if (rdev->family != CHIP_R200)
+ WREG32(RADEON_DISP_HW_DEBUG, disp_hw_debug);
+ else if (rdev->family == CHIP_R200)
+ WREG32(RADEON_FP2_GEN_CNTL, fp2_gen_cntl);
if (rdev->family >= CHIP_R200)
WREG32(RADEON_DISP_TV_OUT_CNTL, disp_tv_out_cntl);
- else
- WREG32(RADEON_DISP_HW_DEBUG, disp_hw_debug);
-
- if (rdev->family == CHIP_R200)
- WREG32(RADEON_FP2_GEN_CNTL, fp2_gen_cntl);
if (is_tv)
radeon_legacy_tv_mode_set(encoder, mode, adjusted_mode);
CT_MINI_INTERNAL,
CT_IMAC_G5_ISIGHT,
CT_EMAC,
+ CT_RN50_POWER,
};
enum radeon_dvo_chip {
rdev->pm.dynpm_planned_action = DYNPM_ACTION_DEFAULT;
mutex_unlock(&rdev->pm.mutex);
} else if (strncmp("profile", buf, strlen("profile")) == 0) {
+ bool flush_wq = false;
+
mutex_lock(&rdev->pm.mutex);
- rdev->pm.pm_method = PM_METHOD_PROFILE;
+ if (rdev->pm.pm_method == PM_METHOD_DYNPM) {
+ cancel_delayed_work(&rdev->pm.dynpm_idle_work);
+ flush_wq = true;
+ }
/* disable dynpm */
rdev->pm.dynpm_state = DYNPM_STATE_DISABLED;
rdev->pm.dynpm_planned_action = DYNPM_ACTION_NONE;
- cancel_delayed_work(&rdev->pm.dynpm_idle_work);
+ rdev->pm.pm_method = PM_METHOD_PROFILE;
mutex_unlock(&rdev->pm.mutex);
+ if (flush_wq)
+ flush_workqueue(rdev->wq);
} else {
DRM_ERROR("invalid power method!\n");
goto fail;
void radeon_pm_suspend(struct radeon_device *rdev)
{
+ bool flush_wq = false;
+
mutex_lock(&rdev->pm.mutex);
- cancel_delayed_work(&rdev->pm.dynpm_idle_work);
+ if (rdev->pm.pm_method == PM_METHOD_DYNPM) {
+ cancel_delayed_work(&rdev->pm.dynpm_idle_work);
+ if (rdev->pm.dynpm_state == DYNPM_STATE_ACTIVE)
+ rdev->pm.dynpm_state = DYNPM_STATE_SUSPENDED;
+ flush_wq = true;
+ }
mutex_unlock(&rdev->pm.mutex);
+ if (flush_wq)
+ flush_workqueue(rdev->wq);
}
void radeon_pm_resume(struct radeon_device *rdev)
rdev->pm.current_sclk = rdev->clock.default_sclk;
rdev->pm.current_mclk = rdev->clock.default_mclk;
rdev->pm.current_vddc = rdev->pm.power_state[rdev->pm.default_power_state_index].clock_info[0].voltage.voltage;
+ if (rdev->pm.pm_method == PM_METHOD_DYNPM
+ && rdev->pm.dynpm_state == DYNPM_STATE_SUSPENDED) {
+ rdev->pm.dynpm_state = DYNPM_STATE_ACTIVE;
+ queue_delayed_work(rdev->wq, &rdev->pm.dynpm_idle_work,
+ msecs_to_jiffies(RADEON_IDLE_LOOP_MS));
+ }
mutex_unlock(&rdev->pm.mutex);
radeon_pm_compute_clocks(rdev);
}
void radeon_pm_fini(struct radeon_device *rdev)
{
if (rdev->pm.num_power_states > 1) {
+ bool flush_wq = false;
+
mutex_lock(&rdev->pm.mutex);
if (rdev->pm.pm_method == PM_METHOD_PROFILE) {
rdev->pm.profile = PM_PROFILE_DEFAULT;
radeon_pm_set_clocks(rdev);
} else if (rdev->pm.pm_method == PM_METHOD_DYNPM) {
/* cancel work */
- cancel_delayed_work_sync(&rdev->pm.dynpm_idle_work);
+ cancel_delayed_work(&rdev->pm.dynpm_idle_work);
+ flush_wq = true;
/* reset default clocks */
rdev->pm.dynpm_state = DYNPM_STATE_DISABLED;
rdev->pm.dynpm_planned_action = DYNPM_ACTION_DEFAULT;
radeon_pm_set_clocks(rdev);
}
mutex_unlock(&rdev->pm.mutex);
+ if (flush_wq)
+ flush_workqueue(rdev->wq);
device_remove_file(rdev->dev, &dev_attr_power_profile);
device_remove_file(rdev->dev, &dev_attr_power_method);
radeon_pm_get_dynpm_state(rdev);
radeon_pm_set_clocks(rdev);
}
+
+ queue_delayed_work(rdev->wq, &rdev->pm.dynpm_idle_work,
+ msecs_to_jiffies(RADEON_IDLE_LOOP_MS));
}
mutex_unlock(&rdev->pm.mutex);
ttm_bo_unlock_delayed_workqueue(&rdev->mman.bdev, resched);
-
- queue_delayed_work(rdev->wq, &rdev->pm.dynpm_idle_work,
- msecs_to_jiffies(RADEON_IDLE_LOOP_MS));
}
/*
0x00028010 DB_RENDER_OVERRIDE2
0x00028028 DB_STENCIL_CLEAR
0x0002802C DB_DEPTH_CLEAR
-0x00028034 PA_SC_SCREEN_SCISSOR_BR
0x00028030 PA_SC_SCREEN_SCISSOR_TL
+0x00028034 PA_SC_SCREEN_SCISSOR_BR
0x0002805C DB_DEPTH_SLICE
0x00028140 SQ_ALU_CONST_BUFFER_SIZE_PS_0
0x00028144 SQ_ALU_CONST_BUFFER_SIZE_PS_1
0x00028844 SQ_PGM_RESOURCES_PS
0x00028848 SQ_PGM_RESOURCES_2_PS
0x0002884C SQ_PGM_EXPORTS_PS
-0x0002885C SQ_PGM_RESOURCES_VS
-0x00028860 SQ_PGM_RESOURCES_2_VS
+0x00028860 SQ_PGM_RESOURCES_VS
+0x00028864 SQ_PGM_RESOURCES_2_VS
0x00028878 SQ_PGM_RESOURCES_GS
0x0002887C SQ_PGM_RESOURCES_2_GS
0x00028890 SQ_PGM_RESOURCES_ES
0x000288A8 SQ_PGM_RESOURCES_FS
0x000288BC SQ_PGM_RESOURCES_HS
0x000288C0 SQ_PGM_RESOURCES_2_HS
-0x000288D0 SQ_PGM_RESOURCES_LS
-0x000288D4 SQ_PGM_RESOURCES_2_LS
+0x000288D4 SQ_PGM_RESOURCES_LS
+0x000288D8 SQ_PGM_RESOURCES_2_LS
0x000288E8 SQ_LDS_ALLOC
0x000288EC SQ_LDS_ALLOC_PS
0x000288F0 SQ_VTX_SEMANTIC_CLEAR
tmp.full = dfixed_const(100);
rdev->pm.igp_sideport_mclk.full = dfixed_const(info->info.ulBootUpMemoryClock);
rdev->pm.igp_sideport_mclk.full = dfixed_div(rdev->pm.igp_sideport_mclk, tmp);
- rdev->pm.igp_system_mclk.full = dfixed_const(le16_to_cpu(info->info.usK8MemoryClock));
+ if (info->info.usK8MemoryClock)
+ rdev->pm.igp_system_mclk.full = dfixed_const(le16_to_cpu(info->info.usK8MemoryClock));
+ else if (rdev->clock.default_mclk) {
+ rdev->pm.igp_system_mclk.full = dfixed_const(rdev->clock.default_mclk);
+ rdev->pm.igp_system_mclk.full = dfixed_div(rdev->pm.igp_system_mclk, tmp);
+ } else
+ rdev->pm.igp_system_mclk.full = dfixed_const(400);
rdev->pm.igp_ht_link_clk.full = dfixed_const(le16_to_cpu(info->info.usFSBClock));
rdev->pm.igp_ht_link_width.full = dfixed_const(info->info.ucHTLinkWidth);
break;
tmp.full = dfixed_const(100);
rdev->pm.igp_sideport_mclk.full = dfixed_const(info->info_v2.ulBootUpSidePortClock);
rdev->pm.igp_sideport_mclk.full = dfixed_div(rdev->pm.igp_sideport_mclk, tmp);
- rdev->pm.igp_system_mclk.full = dfixed_const(info->info_v2.ulBootUpUMAClock);
+ if (info->info_v2.ulBootUpUMAClock)
+ rdev->pm.igp_system_mclk.full = dfixed_const(info->info_v2.ulBootUpUMAClock);
+ else if (rdev->clock.default_mclk)
+ rdev->pm.igp_system_mclk.full = dfixed_const(rdev->clock.default_mclk);
+ else
+ rdev->pm.igp_system_mclk.full = dfixed_const(66700);
rdev->pm.igp_system_mclk.full = dfixed_div(rdev->pm.igp_system_mclk, tmp);
rdev->pm.igp_ht_link_clk.full = dfixed_const(info->info_v2.ulHTLinkFreq);
rdev->pm.igp_ht_link_clk.full = dfixed_div(rdev->pm.igp_ht_link_clk, tmp);
rdev->pm.igp_ht_link_width.full = dfixed_const(le16_to_cpu(info->info_v2.usMinHTLinkWidth));
break;
default:
- tmp.full = dfixed_const(100);
/* We assume the slower possible clock ie worst case */
- /* DDR 333Mhz */
- rdev->pm.igp_sideport_mclk.full = dfixed_const(333);
- /* FIXME: system clock ? */
- rdev->pm.igp_system_mclk.full = dfixed_const(100);
- rdev->pm.igp_system_mclk.full = dfixed_div(rdev->pm.igp_system_mclk, tmp);
- rdev->pm.igp_ht_link_clk.full = dfixed_const(200);
+ rdev->pm.igp_sideport_mclk.full = dfixed_const(200);
+ rdev->pm.igp_system_mclk.full = dfixed_const(200);
+ rdev->pm.igp_ht_link_clk.full = dfixed_const(1000);
rdev->pm.igp_ht_link_width.full = dfixed_const(8);
DRM_ERROR("No integrated system info for your GPU, using safe default\n");
break;
}
} else {
- tmp.full = dfixed_const(100);
/* We assume the slower possible clock ie worst case */
- /* DDR 333Mhz */
- rdev->pm.igp_sideport_mclk.full = dfixed_const(333);
- /* FIXME: system clock ? */
- rdev->pm.igp_system_mclk.full = dfixed_const(100);
- rdev->pm.igp_system_mclk.full = dfixed_div(rdev->pm.igp_system_mclk, tmp);
- rdev->pm.igp_ht_link_clk.full = dfixed_const(200);
+ rdev->pm.igp_sideport_mclk.full = dfixed_const(200);
+ rdev->pm.igp_system_mclk.full = dfixed_const(200);
+ rdev->pm.igp_ht_link_clk.full = dfixed_const(1000);
rdev->pm.igp_ht_link_width.full = dfixed_const(8);
DRM_ERROR("No integrated system info for your GPU, using safe default\n");
}
fixed20_12 a, b, c;
fixed20_12 pclk, request_fifo_depth, tolerable_latency, estimated_width;
fixed20_12 consumption_time, line_time, chunk_time, read_delay_latency;
- /* FIXME: detect IGP with sideport memory, i don't think there is any
- * such product available
- */
- bool sideport = false;
if (!crtc->base.enabled) {
/* FIXME: wouldn't it better to set priority mark to maximum */
/* Maximun bandwidth is the minimun bandwidth of all component */
rdev->pm.max_bandwidth = rdev->pm.core_bandwidth;
- if (sideport) {
+ if (rdev->mc.igp_sideport_enabled) {
if (rdev->pm.max_bandwidth.full > rdev->pm.sideport_bandwidth.full &&
rdev->pm.sideport_bandwidth.full)
rdev->pm.max_bandwidth = rdev->pm.sideport_bandwidth;
WREG32(MC_VM_FB_LOCATION, tmp);
WREG32(HDP_NONSURFACE_BASE, (rdev->mc.vram_start >> 8));
WREG32(HDP_NONSURFACE_INFO, (2 << 7));
- WREG32(HDP_NONSURFACE_SIZE, (rdev->mc.mc_vram_size - 1) | 0x3FF);
+ WREG32(HDP_NONSURFACE_SIZE, 0x3FFFFFFF);
if (rdev->flags & RADEON_IS_AGP) {
WREG32(MC_VM_AGP_TOP, rdev->mc.gtt_end >> 16);
WREG32(MC_VM_AGP_BOT, rdev->mc.gtt_start >> 16);
{
struct ttm_page_pool *pool = ttm_get_pool(flags, cstate);
struct page *p = NULL;
- int gfp_flags = 0;
+ int gfp_flags = GFP_USER;
int r;
/* set zero flag for page allocation if required */
read_rtc:
/* read RTC registers */
- tmp = ds1307->read_block_data(ds1307->client, 0, 8, buf);
+ tmp = ds1307->read_block_data(ds1307->client, ds1307->offset, 8, buf);
if (tmp != 8) {
pr_debug("read error %d\n", tmp);
err = -EIO;
if (ds1307->regs[DS1307_REG_HOUR] & DS1307_BIT_PM)
tmp += 12;
i2c_smbus_write_byte_data(client,
- DS1307_REG_HOUR,
+ ds1307->offset + DS1307_REG_HOUR,
bin2bcd(tmp));
}
}
}
+#if defined(CONFIG_CONSOLE_POLL) || defined(CONFIG_SERIAL_CPM_CONSOLE)
+/*
+ * Write a string to the serial port
+ * Note that this is called with interrupts already disabled
+ */
+static void cpm_uart_early_write(struct uart_cpm_port *pinfo,
+ const char *string, u_int count)
+{
+ unsigned int i;
+ cbd_t __iomem *bdp, *bdbase;
+ unsigned char *cpm_outp_addr;
+
+ /* Get the address of the host memory buffer.
+ */
+ bdp = pinfo->tx_cur;
+ bdbase = pinfo->tx_bd_base;
+
+ /*
+ * Now, do each character. This is not as bad as it looks
+ * since this is a holding FIFO and not a transmitting FIFO.
+ * We could add the complexity of filling the entire transmit
+ * buffer, but we would just wait longer between accesses......
+ */
+ for (i = 0; i < count; i++, string++) {
+ /* Wait for transmitter fifo to empty.
+ * Ready indicates output is ready, and xmt is doing
+ * that, not that it is ready for us to send.
+ */
+ while ((in_be16(&bdp->cbd_sc) & BD_SC_READY) != 0)
+ ;
+
+ /* Send the character out.
+ * If the buffer address is in the CPM DPRAM, don't
+ * convert it.
+ */
+ cpm_outp_addr = cpm2cpu_addr(in_be32(&bdp->cbd_bufaddr),
+ pinfo);
+ *cpm_outp_addr = *string;
+
+ out_be16(&bdp->cbd_datlen, 1);
+ setbits16(&bdp->cbd_sc, BD_SC_READY);
+
+ if (in_be16(&bdp->cbd_sc) & BD_SC_WRAP)
+ bdp = bdbase;
+ else
+ bdp++;
+
+ /* if a LF, also do CR... */
+ if (*string == 10) {
+ while ((in_be16(&bdp->cbd_sc) & BD_SC_READY) != 0)
+ ;
+
+ cpm_outp_addr = cpm2cpu_addr(in_be32(&bdp->cbd_bufaddr),
+ pinfo);
+ *cpm_outp_addr = 13;
+
+ out_be16(&bdp->cbd_datlen, 1);
+ setbits16(&bdp->cbd_sc, BD_SC_READY);
+
+ if (in_be16(&bdp->cbd_sc) & BD_SC_WRAP)
+ bdp = bdbase;
+ else
+ bdp++;
+ }
+ }
+
+ /*
+ * Finally, Wait for transmitter & holding register to empty
+ * and restore the IER
+ */
+ while ((in_be16(&bdp->cbd_sc) & BD_SC_READY) != 0)
+ ;
+
+ pinfo->tx_cur = bdp;
+}
+#endif
+
#ifdef CONFIG_CONSOLE_POLL
/* Serial polling routines for writing and reading from the uart while
* in an interrupt or debug context.
static char ch[2];
ch[0] = (char)c;
- cpm_uart_early_write(pinfo->port.line, ch, 1);
+ cpm_uart_early_write(pinfo, ch, 1);
}
#endif /* CONFIG_CONSOLE_POLL */
u_int count)
{
struct uart_cpm_port *pinfo = &cpm_uart_ports[co->index];
- unsigned int i;
- cbd_t __iomem *bdp, *bdbase;
- unsigned char *cp;
unsigned long flags;
int nolock = oops_in_progress;
spin_lock_irqsave(&pinfo->port.lock, flags);
}
- /* Get the address of the host memory buffer.
- */
- bdp = pinfo->tx_cur;
- bdbase = pinfo->tx_bd_base;
-
- /*
- * Now, do each character. This is not as bad as it looks
- * since this is a holding FIFO and not a transmitting FIFO.
- * We could add the complexity of filling the entire transmit
- * buffer, but we would just wait longer between accesses......
- */
- for (i = 0; i < count; i++, s++) {
- /* Wait for transmitter fifo to empty.
- * Ready indicates output is ready, and xmt is doing
- * that, not that it is ready for us to send.
- */
- while ((in_be16(&bdp->cbd_sc) & BD_SC_READY) != 0)
- ;
-
- /* Send the character out.
- * If the buffer address is in the CPM DPRAM, don't
- * convert it.
- */
- cp = cpm2cpu_addr(in_be32(&bdp->cbd_bufaddr), pinfo);
- *cp = *s;
-
- out_be16(&bdp->cbd_datlen, 1);
- setbits16(&bdp->cbd_sc, BD_SC_READY);
-
- if (in_be16(&bdp->cbd_sc) & BD_SC_WRAP)
- bdp = bdbase;
- else
- bdp++;
-
- /* if a LF, also do CR... */
- if (*s == 10) {
- while ((in_be16(&bdp->cbd_sc) & BD_SC_READY) != 0)
- ;
-
- cp = cpm2cpu_addr(in_be32(&bdp->cbd_bufaddr), pinfo);
- *cp = 13;
-
- out_be16(&bdp->cbd_datlen, 1);
- setbits16(&bdp->cbd_sc, BD_SC_READY);
-
- if (in_be16(&bdp->cbd_sc) & BD_SC_WRAP)
- bdp = bdbase;
- else
- bdp++;
- }
- }
-
- /*
- * Finally, Wait for transmitter & holding register to empty
- * and restore the IER
- */
- while ((in_be16(&bdp->cbd_sc) & BD_SC_READY) != 0)
- ;
-
- pinfo->tx_cur = bdp;
+ cpm_uart_early_write(pinfo, s, count);
if (unlikely(nolock)) {
local_irq_restore(flags);
NULL,
};
-static ssize_t transtable_local_read(struct kobject *kobj,
- struct bin_attribute *bin_attr,
- char *buff, loff_t off, size_t count)
+static ssize_t transtable_local_read(struct file *filp, struct kobject *kobj,
+ struct bin_attribute *bin_attr,
+ char *buff, loff_t off, size_t count)
{
struct device *dev = to_dev(kobj->parent);
struct net_device *net_dev = to_net_dev(dev);
return hna_local_fill_buffer_text(net_dev, buff, count, off);
}
-static ssize_t transtable_global_read(struct kobject *kobj,
- struct bin_attribute *bin_attr,
- char *buff, loff_t off, size_t count)
+static ssize_t transtable_global_read(struct file *filp, struct kobject *kobj,
+ struct bin_attribute *bin_attr,
+ char *buff, loff_t off, size_t count)
{
struct device *dev = to_dev(kobj->parent);
struct net_device *net_dev = to_net_dev(dev);
return hna_global_fill_buffer_text(net_dev, buff, count, off);
}
-static ssize_t originators_read(struct kobject *kobj,
- struct bin_attribute *bin_attr,
- char *buff, loff_t off, size_t count)
+static ssize_t originators_read(struct file *filp, struct kobject *kobj,
+ struct bin_attribute *bin_attr,
+ char *buff, loff_t off, size_t count)
{
struct device *dev = to_dev(kobj->parent);
struct net_device *net_dev = to_net_dev(dev);
return orig_fill_buffer_text(net_dev, buff, count, off);
}
-static ssize_t vis_data_read(struct kobject *kobj,
- struct bin_attribute *bin_attr,
- char *buff, loff_t off, size_t count)
+static ssize_t vis_data_read(struct file *filp, struct kobject *kobj,
+ struct bin_attribute *bin_attr,
+ char *buff, loff_t off, size_t count)
{
struct device *dev = to_dev(kobj->parent);
struct net_device *net_dev = to_net_dev(dev);
kfree(device_packet);
if (error)
- return error;
+ return -EFAULT;
return sizeof(struct icmp_packet);
}
plx9050_interrupt_control(dev_private->lcr_io_base, true, true,
false, true, true);
- dev_private->scan_delay =
- (async_cmd->scan_begin_arg / (async_cmd->convert_arg *
- async_cmd->chanlist_len)) - 1;
+ if (async_cmd->scan_begin_src == TRIG_TIMER) {
+ dev_private->scan_delay =
+ (async_cmd->scan_begin_arg /
+ (async_cmd->convert_arg *
+ async_cmd->chanlist_len)) - 1;
+ }
break;
#include "8255.h"
#define PCI_VENDOR_ID_CB 0x1307 /* PCI vendor number of ComputerBoards */
-#define N_BOARDS 10 /* Number of boards in cb_pcidda_boards */
#define EEPROM_SIZE 128 /* number of entries in eeprom */
#define MAX_AO_CHANNELS 8 /* maximum number of ao channels for supported boards */
continue;
}
}
- for (index = 0; index < N_BOARDS; index++) {
+ for (index = 0; index < ARRAY_SIZE(cb_pcidda_boards); index++) {
if (cb_pcidda_boards[index].device_id ==
pcidev->device) {
goto found;
#include <linux/slab.h>
#include <linux/list.h>
#include <linux/module.h>
+#include <linux/completion.h>
#include "osd.h"
#include "logging.h"
#include "vmbus_private.h"
Channel);
}
+
+DECLARE_COMPLETION(hv_channel_ready);
+
+/*
+ * Count initialized channels, and ensure all channels are ready when hv_vmbus
+ * module loading completes.
+ */
+static void count_hv_channel(void)
+{
+ static int counter;
+ unsigned long flags;
+
+ spin_lock_irqsave(&gVmbusConnection.channel_lock, flags);
+ if (++counter == MAX_MSG_TYPES)
+ complete(&hv_channel_ready);
+ spin_unlock_irqrestore(&gVmbusConnection.channel_lock, flags);
+}
+
+
/*
* VmbusChannelProcessOffer - Process the offer by creating a channel/device
* associated with this offer
* can cleanup properly
*/
newChannel->State = CHANNEL_OPEN_STATE;
- cnt = 0;
- while (cnt != MAX_MSG_TYPES) {
+ /* Open IC channels */
+ for (cnt = 0; cnt < MAX_MSG_TYPES; cnt++) {
if (memcmp(&newChannel->OfferMsg.Offer.InterfaceType,
&hv_cb_utils[cnt].data,
- sizeof(struct hv_guid)) == 0) {
+ sizeof(struct hv_guid)) == 0 &&
+ VmbusChannelOpen(newChannel, 2 * PAGE_SIZE,
+ 2 * PAGE_SIZE, NULL, 0,
+ hv_cb_utils[cnt].callback,
+ newChannel) == 0) {
+ hv_cb_utils[cnt].channel = newChannel;
DPRINT_INFO(VMBUS, "%s",
- hv_cb_utils[cnt].log_msg);
-
- if (VmbusChannelOpen(newChannel, 2 * PAGE_SIZE,
- 2 * PAGE_SIZE, NULL, 0,
- hv_cb_utils[cnt].callback,
- newChannel) == 0)
- hv_cb_utils[cnt].channel = newChannel;
+ hv_cb_utils[cnt].log_msg);
+ count_hv_channel();
}
- cnt++;
}
}
DPRINT_EXIT(VMBUS);
#include <linux/slab.h>
#include <linux/sysctl.h>
#include <linux/reboot.h>
+#include <linux/dmi.h>
+#include <linux/pci.h>
#include "logging.h"
#include "osd.h"
DPRINT_EXIT(VMBUS);
}
+static const struct pci_device_id __initconst
+hv_utils_pci_table[] __maybe_unused = {
+ { PCI_DEVICE(0x1414, 0x5353) }, /* Hyper-V emulated VGA controller */
+ { 0 }
+};
+MODULE_DEVICE_TABLE(pci, hv_utils_pci_table);
+
+
+static const struct dmi_system_id __initconst
+hv_utils_dmi_table[] __maybe_unused = {
+ {
+ .ident = "Hyper-V",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Microsoft Corporation"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Virtual Machine"),
+ DMI_MATCH(DMI_BOARD_NAME, "Virtual Machine"),
+ },
+ },
+ { },
+};
+MODULE_DEVICE_TABLE(dmi, hv_utils_dmi_table);
+
+
static int __init init_hyperv_utils(void)
{
printk(KERN_INFO "Registering HyperV Utility Driver\n");
+ if (!dmi_check_system(hv_utils_dmi_table))
+ return -ENODEV;
+
hv_cb_utils[HV_SHUTDOWN_MSG].channel->OnChannelCallback =
&shutdown_onchannelcallback;
hv_cb_utils[HV_SHUTDOWN_MSG].callback = &shutdown_onchannelcallback;
void vmbus_child_driver_unregister(struct driver_context *driver_ctx);
void vmbus_get_interface(struct vmbus_channel_interface *interface);
+extern struct completion hv_channel_ready;
+
#endif /* _VMBUS_H_ */
#include <linux/pci.h>
#include <linux/dmi.h>
#include <linux/slab.h>
+#include <linux/completion.h>
#include "version_info.h"
#include "osd.h"
#include "logging.h"
vmbus_drv_obj->GetChannelOffers();
+ wait_for_completion(&hv_channel_ready);
+
cleanup:
DPRINT_EXIT(VMBUS_DRV);
free_irq(mrstouchdevp->irq, mrstouchdevp);
input_unregister_device(mrstouchdevp->input);
input_free_device(mrstouchdevp->input);
- kfree(mrstouchdevp);
if (mrstouchdevp->pendet_thrd)
kthread_stop(mrstouchdevp->pendet_thrd);
+ kfree(mrstouchdevp);
return 0;
}
{USB_DEVICE(0x083A, 0x7522)}, /* Arcadyan */
{USB_DEVICE(0x0CDE, 0x0022)}, /* ZCOM */
{USB_DEVICE(0x0586, 0x3416)}, /* Zyxel */
+ {USB_DEVICE(0x0586, 0x341a)}, /* Zyxel NWD-270N */
{USB_DEVICE(0x0CDE, 0x0025)}, /* Zyxel */
{USB_DEVICE(0x1740, 0x9701)}, /* EnGenius */
{USB_DEVICE(0x1740, 0x9702)}, /* EnGenius */
static int hwwep = 0;
static int channels = 0x3fff;
-#define eqMacAddr(a, b) (((a)[0] == (b)[0] && (a)[1] == (b)[1] && (a)[2] == (b)[2] && (a)[3] == (b)[3] && (a)[4] == (b)[4] && (a)[5] == (b)[5]) ? 1 : 0)
-#define cpMacAddr(des, src) ((des)[0] = (src)[0], (des)[1] = (src)[1], (des)[2] = (src)[2], (des)[3] = (src)[3], (des)[4] = (src)[4], (des)[5] = (src)[5])
MODULE_LICENSE("GPL");
MODULE_DEVICE_TABLE(pci, rtl8180_pci_id_tbl);
MODULE_AUTHOR("Andrea Merello <andreamrl@tiscali.it>");
#define CAM_CONTENT_COUNT 8
static const struct usb_device_id rtl8192_usb_id_tbl[] = {
- /* Realtek */
- {USB_DEVICE(0x0bda, 0x8171)},
- {USB_DEVICE(0x0bda, 0x8192)},
- {USB_DEVICE(0x0bda, 0x8709)},
- /* Corega */
- {USB_DEVICE(0x07aa, 0x0043)},
- /* Belkin */
- {USB_DEVICE(0x050d, 0x805E)},
- {USB_DEVICE(0x050d, 0x815F)}, /* Belkin F5D8053 v6 */
- /* Sitecom */
- {USB_DEVICE(0x0df6, 0x0031)},
- {USB_DEVICE(0x0df6, 0x004b)}, /* WL-349 */
- /* EnGenius */
- {USB_DEVICE(0x1740, 0x9201)},
- /* Dlink */
- {USB_DEVICE(0x2001, 0x3301)},
- /* Zinwell */
- {USB_DEVICE(0x5a57, 0x0290)},
- /* Guillemot */
- {USB_DEVICE(0x06f8, 0xe031)},
- //92SU
+ {USB_DEVICE(0x0bda, 0x8171)}, /* Realtek */
{USB_DEVICE(0x0bda, 0x8172)},
+ {USB_DEVICE(0x0bda, 0x8173)},
+ {USB_DEVICE(0x0bda, 0x8174)},
+ {USB_DEVICE(0x0bda, 0x8712)},
+ {USB_DEVICE(0x0bda, 0x8713)},
+ {USB_DEVICE(0x07aa, 0x0047)},
+ {USB_DEVICE(0x07d1, 0x3303)},
+ {USB_DEVICE(0x07d1, 0x3302)},
+ {USB_DEVICE(0x07d1, 0x3300)},
+ {USB_DEVICE(0x1740, 0x9603)},
+ {USB_DEVICE(0x1740, 0x9605)},
+ {USB_DEVICE(0x050d, 0x815F)},
+ {USB_DEVICE(0x06f8, 0xe031)},
+ {USB_DEVICE(0x7392, 0x7611)},
+ {USB_DEVICE(0x7392, 0x7612)},
+ {USB_DEVICE(0x7392, 0x7622)},
+ {USB_DEVICE(0x0DF6, 0x0045)},
+ {USB_DEVICE(0x0E66, 0x0015)},
+ {USB_DEVICE(0x0E66, 0x0016)},
+ {USB_DEVICE(0x0b05, 0x1786)},
+ /* these are not in the official list */
+ {USB_DEVICE(0x0df6, 0x004b)}, /* WL-349 */
{}
};
{USB_DEVICE(0x2001, 0x3301)},
/* Zinwell */
{USB_DEVICE(0x5a57, 0x0290)},
+ /* LG */
+ {USB_DEVICE(0x043e, 0x7a01)},
{}
};
complete_and_exit(&ut->thread_done, 0);
}
+static void stop_rx_thread(struct usbip_device *ud)
+{
+ if (ud->tcp_rx.thread != NULL) {
+ send_sig(SIGKILL, ud->tcp_rx.thread, 1);
+ wait_for_completion(&ud->tcp_rx.thread_done);
+ usbip_udbg("rx_thread for ud %p has finished\n", ud);
+ }
+}
+
+static void stop_tx_thread(struct usbip_device *ud)
+{
+ if (ud->tcp_tx.thread != NULL) {
+ send_sig(SIGKILL, ud->tcp_tx.thread, 1);
+ wait_for_completion(&ud->tcp_tx.thread_done);
+ usbip_udbg("tx_thread for ud %p has finished\n", ud);
+ }
+}
+
int usbip_start_threads(struct usbip_device *ud)
{
/*
* threads are invoked per one device (per one connection).
*/
struct task_struct *th;
+ int err = 0;
th = kthread_run(usbip_thread, (void *)&ud->tcp_rx, "usbip");
if (IS_ERR(th)) {
printk(KERN_WARNING
"Unable to start control thread\n");
- return PTR_ERR(th);
+ err = PTR_ERR(th);
+ goto ust_exit;
}
+
th = kthread_run(usbip_thread, (void *)&ud->tcp_tx, "usbip");
if (IS_ERR(th)) {
printk(KERN_WARNING
"Unable to start control thread\n");
- return PTR_ERR(th);
+ err = PTR_ERR(th);
+ goto tx_thread_err;
}
/* confirm threads are starting */
wait_for_completion(&ud->tcp_rx.thread_done);
wait_for_completion(&ud->tcp_tx.thread_done);
+
return 0;
+
+tx_thread_err:
+ stop_rx_thread(ud);
+
+ust_exit:
+ return err;
}
EXPORT_SYMBOL_GPL(usbip_start_threads);
void usbip_stop_threads(struct usbip_device *ud)
{
/* kill threads related to this sdev, if v.c. exists */
- if (ud->tcp_rx.thread != NULL) {
- send_sig(SIGKILL, ud->tcp_rx.thread, 1);
- wait_for_completion(&ud->tcp_rx.thread_done);
- usbip_udbg("rx_thread for ud %p has finished\n", ud);
- }
-
- if (ud->tcp_tx.thread != NULL) {
- send_sig(SIGKILL, ud->tcp_tx.thread, 1);
- wait_for_completion(&ud->tcp_tx.thread_done);
- usbip_udbg("tx_thread for ud %p has finished\n", ud);
- }
+ stop_rx_thread(ud);
+ stop_tx_thread(ud);
}
EXPORT_SYMBOL_GPL(usbip_stop_threads);
/*******************************************************************************
* include files
******************************************************************************/
+#include <linux/string.h>
#include <wl_version.h>
#include <debug.h>
extern void register_wlags_sysfs(struct net_device *);
extern void unregister_wlags_sysfs(struct net_device *);
#else
-static void register_wlags_sysfs(struct net_device *) { return; };
-static void unregister_wlags_sysfs(struct net_device *) { return; };
+static inline void register_wlags_sysfs(struct net_device *net) { }
+static inline void unregister_wlags_sysfs(struct net_device *net) { }
#endif
static void choose_wakeup(struct usb_device *udev, pm_message_t msg)
{
- int w, i;
- struct usb_interface *intf;
+ int w;
/* Remote wakeup is needed only when we actually go to sleep.
* For things like FREEZE and QUIESCE, if the device is already
return;
}
- /* If remote wakeup is permitted, see whether any interface drivers
+ /* Enable remote wakeup if it is allowed, even if no interface drivers
* actually want it.
*/
- w = 0;
- if (device_may_wakeup(&udev->dev) && udev->actconfig) {
- for (i = 0; i < udev->actconfig->desc.bNumInterfaces; i++) {
- intf = udev->actconfig->interface[i];
- w |= intf->needs_remote_wakeup;
- }
- }
+ w = device_may_wakeup(&udev->dev);
/* If the device is autosuspended with the wrong wakeup setting,
* autoresume now so the setting can be changed.
/* A length of zero means transfer the whole sg list */
len = length;
if (len == 0) {
- for_each_sg(sg, sg, nents, i)
- len += sg->length;
+ struct scatterlist *sg2;
+ int j;
+
+ for_each_sg(sg, sg2, nents, j)
+ len += sg2->length;
}
} else {
/*
crc = get_unaligned_le32(skb->data + len
- ETH_FCS_LEN);
crc2 = ~crc32_le(~0,
- skb->data,
- skb->len - ETH_FCS_LEN);
+ skb->data, len - ETH_FCS_LEN);
} else {
crc = get_unaligned_be32(skb->data + len
- ETH_FCS_LEN);
/* Data shared by all the FSG instances. */
struct fsg_common {
struct usb_gadget *gadget;
- struct fsg_dev *fsg;
- struct fsg_dev *prev_fsg;
+ struct fsg_dev *fsg, *new_fsg;
+ wait_queue_head_t fsg_wait;
/* filesem protects: backing files in use */
struct rw_semaphore filesem;
enum fsg_state state; /* For exception handling */
unsigned int exception_req_tag;
- u8 config, new_config;
enum data_direction data_dir;
u32 data_size;
u32 data_size_from_cmnd;
u16 w_value = le16_to_cpu(ctrl->wValue);
u16 w_length = le16_to_cpu(ctrl->wLength);
- if (!fsg->common->config)
+ if (!fsg_is_set(fsg->common))
return -EOPNOTSUPP;
switch (ctrl->bRequest) {
return -ENOMEM;
}
-/*
- * Reset interface setting and re-init endpoint state (toggle etc).
- * Call with altsetting < 0 to disable the interface. The only other
- * available altsetting is 0, which enables the interface.
- */
-static int do_set_interface(struct fsg_common *common, int altsetting)
+/* Reset interface setting and re-init endpoint state (toggle etc). */
+static int do_set_interface(struct fsg_common *common, struct fsg_dev *new_fsg)
{
- int rc = 0;
- int i;
- const struct usb_endpoint_descriptor *d;
+ const struct usb_endpoint_descriptor *d;
+ struct fsg_dev *fsg;
+ int i, rc = 0;
if (common->running)
DBG(common, "reset interface\n");
reset:
/* Deallocate the requests */
- if (common->prev_fsg) {
- struct fsg_dev *fsg = common->prev_fsg;
+ if (common->fsg) {
+ fsg = common->fsg;
for (i = 0; i < FSG_NUM_BUFFERS; ++i) {
struct fsg_buffhd *bh = &common->buffhds[i];
fsg->bulk_out_enabled = 0;
}
- common->prev_fsg = 0;
+ common->fsg = NULL;
+ wake_up(&common->fsg_wait);
}
common->running = 0;
- if (altsetting < 0 || rc != 0)
+ if (!new_fsg || rc)
return rc;
- DBG(common, "set interface %d\n", altsetting);
+ common->fsg = new_fsg;
+ fsg = common->fsg;
- if (fsg_is_set(common)) {
- struct fsg_dev *fsg = common->fsg;
- common->prev_fsg = common->fsg;
+ /* Enable the endpoints */
+ d = fsg_ep_desc(common->gadget,
+ &fsg_fs_bulk_in_desc, &fsg_hs_bulk_in_desc);
+ rc = enable_endpoint(common, fsg->bulk_in, d);
+ if (rc)
+ goto reset;
+ fsg->bulk_in_enabled = 1;
+
+ d = fsg_ep_desc(common->gadget,
+ &fsg_fs_bulk_out_desc, &fsg_hs_bulk_out_desc);
+ rc = enable_endpoint(common, fsg->bulk_out, d);
+ if (rc)
+ goto reset;
+ fsg->bulk_out_enabled = 1;
+ common->bulk_out_maxpacket = le16_to_cpu(d->wMaxPacketSize);
+ clear_bit(IGNORE_BULK_OUT, &fsg->atomic_bitflags);
- /* Enable the endpoints */
- d = fsg_ep_desc(common->gadget,
- &fsg_fs_bulk_in_desc, &fsg_hs_bulk_in_desc);
- rc = enable_endpoint(common, fsg->bulk_in, d);
+ /* Allocate the requests */
+ for (i = 0; i < FSG_NUM_BUFFERS; ++i) {
+ struct fsg_buffhd *bh = &common->buffhds[i];
+
+ rc = alloc_request(common, fsg->bulk_in, &bh->inreq);
if (rc)
goto reset;
- fsg->bulk_in_enabled = 1;
-
- d = fsg_ep_desc(common->gadget,
- &fsg_fs_bulk_out_desc, &fsg_hs_bulk_out_desc);
- rc = enable_endpoint(common, fsg->bulk_out, d);
+ rc = alloc_request(common, fsg->bulk_out, &bh->outreq);
if (rc)
goto reset;
- fsg->bulk_out_enabled = 1;
- common->bulk_out_maxpacket = le16_to_cpu(d->wMaxPacketSize);
- clear_bit(IGNORE_BULK_OUT, &fsg->atomic_bitflags);
-
- /* Allocate the requests */
- for (i = 0; i < FSG_NUM_BUFFERS; ++i) {
- struct fsg_buffhd *bh = &common->buffhds[i];
-
- rc = alloc_request(common, fsg->bulk_in, &bh->inreq);
- if (rc)
- goto reset;
- rc = alloc_request(common, fsg->bulk_out, &bh->outreq);
- if (rc)
- goto reset;
- bh->inreq->buf = bh->outreq->buf = bh->buf;
- bh->inreq->context = bh->outreq->context = bh;
- bh->inreq->complete = bulk_in_complete;
- bh->outreq->complete = bulk_out_complete;
- }
-
- common->running = 1;
- for (i = 0; i < common->nluns; ++i)
- common->luns[i].unit_attention_data = SS_RESET_OCCURRED;
- return rc;
- } else {
- return -EIO;
- }
-}
-
-
-/*
- * Change our operational configuration. This code must agree with the code
- * that returns config descriptors, and with interface altsetting code.
- *
- * It's also responsible for power management interactions. Some
- * configurations might not work with our current power sources.
- * For now we just assume the gadget is always self-powered.
- */
-static int do_set_config(struct fsg_common *common, u8 new_config)
-{
- int rc = 0;
-
- /* Disable the single interface */
- if (common->config != 0) {
- DBG(common, "reset config\n");
- common->config = 0;
- rc = do_set_interface(common, -1);
+ bh->inreq->buf = bh->outreq->buf = bh->buf;
+ bh->inreq->context = bh->outreq->context = bh;
+ bh->inreq->complete = bulk_in_complete;
+ bh->outreq->complete = bulk_out_complete;
}
- /* Enable the interface */
- if (new_config != 0) {
- common->config = new_config;
- rc = do_set_interface(common, 0);
- if (rc != 0)
- common->config = 0; /* Reset on errors */
- }
+ common->running = 1;
+ for (i = 0; i < common->nluns; ++i)
+ common->luns[i].unit_attention_data = SS_RESET_OCCURRED;
return rc;
}
static int fsg_set_alt(struct usb_function *f, unsigned intf, unsigned alt)
{
struct fsg_dev *fsg = fsg_from_func(f);
- fsg->common->prev_fsg = fsg->common->fsg;
- fsg->common->fsg = fsg;
- fsg->common->new_config = 1;
+ fsg->common->new_fsg = fsg;
raise_exception(fsg->common, FSG_STATE_CONFIG_CHANGE);
return 0;
}
static void fsg_disable(struct usb_function *f)
{
struct fsg_dev *fsg = fsg_from_func(f);
- fsg->common->prev_fsg = fsg->common->fsg;
- fsg->common->fsg = fsg;
- fsg->common->new_config = 0;
+ fsg->common->new_fsg = NULL;
raise_exception(fsg->common, FSG_STATE_CONFIG_CHANGE);
}
static void handle_exception(struct fsg_common *common)
{
siginfo_t info;
- int sig;
int i;
struct fsg_buffhd *bh;
enum fsg_state old_state;
- u8 new_config;
struct fsg_lun *curlun;
unsigned int exception_req_tag;
- int rc;
/* Clear the existing signals. Anything but SIGUSR1 is converted
* into a high-priority EXIT exception. */
for (;;) {
- sig = dequeue_signal_lock(current, ¤t->blocked, &info);
+ int sig =
+ dequeue_signal_lock(current, ¤t->blocked, &info);
if (!sig)
break;
if (sig != SIGUSR1) {
}
/* Cancel all the pending transfers */
- if (fsg_is_set(common)) {
+ if (likely(common->fsg)) {
for (i = 0; i < FSG_NUM_BUFFERS; ++i) {
bh = &common->buffhds[i];
if (bh->inreq_busy)
common->next_buffhd_to_fill = &common->buffhds[0];
common->next_buffhd_to_drain = &common->buffhds[0];
exception_req_tag = common->exception_req_tag;
- new_config = common->new_config;
old_state = common->state;
if (old_state == FSG_STATE_ABORT_BULK_OUT)
break;
case FSG_STATE_CONFIG_CHANGE:
- rc = do_set_config(common, new_config);
+ do_set_interface(common, common->new_fsg);
break;
case FSG_STATE_EXIT:
case FSG_STATE_TERMINATED:
- do_set_config(common, 0); /* Free resources */
+ do_set_interface(common, NULL); /* Free resources */
spin_lock_irq(&common->lock);
common->state = FSG_STATE_TERMINATED; /* Stop the thread */
spin_unlock_irq(&common->lock);
goto error_release;
}
init_completion(&common->thread_notifier);
+ init_waitqueue_head(&common->fsg_wait);
#undef OR
static void fsg_unbind(struct usb_configuration *c, struct usb_function *f)
{
struct fsg_dev *fsg = fsg_from_func(f);
+ struct fsg_common *common = fsg->common;
DBG(fsg, "unbind\n");
- fsg_common_put(fsg->common);
+ if (fsg->common->fsg == fsg) {
+ fsg->common->new_fsg = NULL;
+ raise_exception(fsg->common, FSG_STATE_CONFIG_CHANGE);
+ /* FIXME: make interruptible or killable somehow? */
+ wait_event(common->fsg_wait, common->fsg != fsg);
+ }
+
+ fsg_common_put(common);
usb_free_descriptors(fsg->function.descriptors);
usb_free_descriptors(fsg->function.hs_descriptors);
kfree(fsg);
{
struct fsg_dev *fsg = fsg_from_func(f);
struct usb_gadget *gadget = c->cdev->gadget;
- int rc;
int i;
struct usb_ep *ep;
ep->driver_data = fsg->common; /* claim the endpoint */
fsg->bulk_out = ep;
+ /* Copy descriptors */
+ f->descriptors = usb_copy_descriptors(fsg_fs_function);
+ if (unlikely(!f->descriptors))
+ return -ENOMEM;
+
if (gadget_is_dualspeed(gadget)) {
/* Assume endpoint addresses are the same for both speeds */
fsg_hs_bulk_in_desc.bEndpointAddress =
fsg_hs_bulk_out_desc.bEndpointAddress =
fsg_fs_bulk_out_desc.bEndpointAddress;
f->hs_descriptors = usb_copy_descriptors(fsg_hs_function);
- if (unlikely(!f->hs_descriptors))
+ if (unlikely(!f->hs_descriptors)) {
+ usb_free_descriptors(f->descriptors);
return -ENOMEM;
+ }
}
return 0;
autoconf_fail:
ERROR(fsg, "unable to autoconfigure all endpoints\n");
- rc = -ENOTSUPP;
- return rc;
+ return -ENOTSUPP;
}
fsg->function.name = FSG_DRIVER_DESC;
fsg->function.strings = fsg_strings_array;
- fsg->function.descriptors = usb_copy_descriptors(fsg_fs_function);
- if (unlikely(!fsg->function.descriptors)) {
- rc = -ENOMEM;
- goto error_free_fsg;
- }
fsg->function.bind = fsg_bind;
fsg->function.unbind = fsg_unbind;
fsg->function.setup = fsg_setup;
rc = usb_add_function(c, &fsg->function);
if (unlikely(rc))
- goto error_free_all;
-
- fsg_common_get(fsg->common);
- return 0;
-
-error_free_all:
- usb_free_descriptors(fsg->function.descriptors);
- /* fsg_bind() might have copied those; or maybe not? who cares
- * -- free it just in case. */
- usb_free_descriptors(fsg->function.hs_descriptors);
-error_free_fsg:
- kfree(fsg);
-
+ kfree(fsg);
+ else
+ fsg_common_get(fsg->common);
return rc;
}
if (unlikely(ret < 0))
return ret;
+ /* After previous do_configs there may be some invalid
+ * pointers in c->interface array. This happens every time
+ * a user space function with fewer interfaces than a user
+ * space function that was run before the new one is run. The
+ * compasit's set_config() assumes that if there is no more
+ * then MAX_CONFIG_INTERFACES interfaces in a configuration
+ * then there is a NULL pointer after the last interface in
+ * c->interface array. We need to make sure this is true. */
+ if (c->next_interface_id < ARRAY_SIZE(c->interface))
+ c->interface[c->next_interface_id] = NULL;
+
return 0;
}
struct printer_dev {
spinlock_t lock; /* lock this structure */
/* lock buffer lists during read/write calls */
- spinlock_t lock_printer_io;
+ struct mutex lock_printer_io;
struct usb_gadget *gadget;
struct usb_request *req; /* for control responses */
u8 config;
DBG(dev, "printer_read trying to read %d bytes\n", (int)len);
- spin_lock(&dev->lock_printer_io);
+ mutex_lock(&dev->lock_printer_io);
spin_lock_irqsave(&dev->lock, flags);
/* We will use this flag later to check if a printer reset happened
* call or not.
*/
if (fd->f_flags & (O_NONBLOCK|O_NDELAY)) {
- spin_unlock(&dev->lock_printer_io);
+ mutex_unlock(&dev->lock_printer_io);
return -EAGAIN;
}
if (dev->reset_printer) {
list_add(¤t_rx_req->list, &dev->rx_reqs);
spin_unlock_irqrestore(&dev->lock, flags);
- spin_unlock(&dev->lock_printer_io);
+ mutex_unlock(&dev->lock_printer_io);
return -EAGAIN;
}
dev->current_rx_buf = current_rx_buf;
spin_unlock_irqrestore(&dev->lock, flags);
- spin_unlock(&dev->lock_printer_io);
+ mutex_unlock(&dev->lock_printer_io);
DBG(dev, "printer_read returned %d bytes\n", (int)bytes_copied);
if (len == 0)
return -EINVAL;
- spin_lock(&dev->lock_printer_io);
+ mutex_lock(&dev->lock_printer_io);
spin_lock_irqsave(&dev->lock, flags);
/* Check if a printer reset happens while we have interrupts on */
* a NON-Blocking call or not.
*/
if (fd->f_flags & (O_NONBLOCK|O_NDELAY)) {
- spin_unlock(&dev->lock_printer_io);
+ mutex_unlock(&dev->lock_printer_io);
return -EAGAIN;
}
if (copy_from_user(req->buf, buf, size)) {
list_add(&req->list, &dev->tx_reqs);
- spin_unlock(&dev->lock_printer_io);
+ mutex_unlock(&dev->lock_printer_io);
return bytes_copied;
}
if (dev->reset_printer) {
list_add(&req->list, &dev->tx_reqs);
spin_unlock_irqrestore(&dev->lock, flags);
- spin_unlock(&dev->lock_printer_io);
+ mutex_unlock(&dev->lock_printer_io);
return -EAGAIN;
}
if (usb_ep_queue(dev->in_ep, req, GFP_ATOMIC)) {
list_add(&req->list, &dev->tx_reqs);
spin_unlock_irqrestore(&dev->lock, flags);
- spin_unlock(&dev->lock_printer_io);
+ mutex_unlock(&dev->lock_printer_io);
return -EAGAIN;
}
}
spin_unlock_irqrestore(&dev->lock, flags);
- spin_unlock(&dev->lock_printer_io);
+ mutex_unlock(&dev->lock_printer_io);
DBG(dev, "printer_write sent %d bytes\n", (int)bytes_copied);
unsigned long flags;
int status = 0;
- spin_lock(&dev->lock_printer_io);
+ mutex_lock(&dev->lock_printer_io);
spin_lock_irqsave(&dev->lock, flags);
setup_rx_reqs(dev);
spin_unlock_irqrestore(&dev->lock, flags);
- spin_unlock(&dev->lock_printer_io);
+ mutex_unlock(&dev->lock_printer_io);
poll_wait(fd, &dev->rx_wait, wait);
poll_wait(fd, &dev->tx_wait, wait);
}
spin_lock_init(&dev->lock);
- spin_lock_init(&dev->lock_printer_io);
+ mutex_init(&dev->lock_printer_io);
INIT_LIST_HEAD(&dev->tx_reqs);
INIT_LIST_HEAD(&dev->tx_reqs_active);
INIT_LIST_HEAD(&dev->rx_reqs);
{
int status;
- spin_lock(&usb_printer_gadget.lock_printer_io);
+ mutex_lock(&usb_printer_gadget.lock_printer_io);
class_destroy(usb_gadget_class);
unregister_chrdev_region(g_printer_devno, 2);
if (status)
ERROR(dev, "usb_gadget_unregister_driver %x\n", status);
- spin_unlock(&usb_printer_gadget.lock_printer_io);
+ mutex_unlock(&usb_printer_gadget.lock_printer_io);
}
module_exit(cleanup);
if (!driver || driver != udc->driver || !driver->unbind)
return -EINVAL;
- dprintk(DEBUG_NORMAL,"usb_gadget_register_driver() '%s'\n",
+ dprintk(DEBUG_NORMAL, "usb_gadget_unregister_driver() '%s'\n",
driver->driver.name);
+ /* report disconnect */
+ if (driver->disconnect)
+ driver->disconnect(&udc->gadget);
+
driver->unbind(&udc->gadget);
device_del(&udc->gadget.dev);
list_move(&req->list, &port->read_pool);
}
- /* Push from tty to ldisc; this is immediate with low_latency, and
- * may trigger callbacks to this driver ... so drop the spinlock.
+ /* Push from tty to ldisc; without low_latency set this is handled by
+ * a workqueue, so we won't get callbacks and can hold port_lock
*/
if (tty && do_push) {
- spin_unlock_irq(&port->port_lock);
tty_flip_buffer_push(tty);
- wake_up_interruptible(&tty->read_wait);
- spin_lock_irq(&port->port_lock);
-
- /* tty may have been closed */
- tty = port->port_tty;
}
port->open_count = 1;
port->openclose = false;
- /* low_latency means ldiscs work in tasklet context, without
- * needing a workqueue schedule ... easier to keep up.
- */
- tty->low_latency = 1;
-
/* if connected, start the I/O stream */
if (port->port_usb) {
struct gserial *gser = port->port_usb;
n_ports = 0;
tty_unregister_driver(gs_tty_driver);
+ put_tty_driver(gs_tty_driver);
gs_tty_driver = NULL;
pr_debug("%s: cleaned up ttyGS* support\n", __func__);
/* Initialize the transceiver */
if (pdata->otg) {
pdata->otg->io_priv = hcd->regs + ULPI_VIEWPORT_OFFSET;
- if (otg_init(pdata->otg) != 0)
- dev_err(dev, "unable to init transceiver\n");
- else if (otg_set_vbus(pdata->otg, 1) != 0)
+ ret = otg_init(pdata->otg);
+ if (ret) {
+ dev_err(dev, "unable to init transceiver, probably missing\n");
+ ret = -ENODEV;
+ goto err_add;
+ }
+ ret = otg_set_vbus(pdata->otg, 1);
+ if (ret) {
dev_err(dev, "unable to enable vbus on transceiver\n");
+ goto err_add;
+ }
}
priv->hcd = hcd;
/*-------------------------------------------------------------------------*/
-static void isp1362_sw_reset(struct isp1362_hcd *isp1362_hcd)
+static void __isp1362_sw_reset(struct isp1362_hcd *isp1362_hcd)
{
int tmp = 20;
- unsigned long flags;
-
- spin_lock_irqsave(&isp1362_hcd->lock, flags);
isp1362_write_reg16(isp1362_hcd, HCSWRES, HCSWRES_MAGIC);
isp1362_write_reg32(isp1362_hcd, HCCMDSTAT, OHCI_HCR);
}
if (!tmp)
pr_err("Software reset timeout\n");
+}
+
+static void isp1362_sw_reset(struct isp1362_hcd *isp1362_hcd)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&isp1362_hcd->lock, flags);
+ __isp1362_sw_reset(isp1362_hcd);
spin_unlock_irqrestore(&isp1362_hcd->lock, flags);
}
if (isp1362_hcd->board && isp1362_hcd->board->reset)
isp1362_hcd->board->reset(hcd->self.controller, 1);
else
- isp1362_sw_reset(isp1362_hcd);
+ __isp1362_sw_reset(isp1362_hcd);
if (isp1362_hcd->board && isp1362_hcd->board->clock)
isp1362_hcd->board->clock(hcd->self.controller, 0);
else if (speed == LSMODE)
rh->port |= USB_PORT_STAT_LOW_SPEED;
- rh->port &= USB_PORT_STAT_RESET;
+ rh->port &= ~USB_PORT_STAT_RESET;
rh->port |= USB_PORT_STAT_ENABLE;
}
* set, but other sections talk about dealing with the chain bit set. This was
* fixed in the 0.96 specification errata, but we have to assume that all 0.95
* xHCI hardware can't handle the chain bit being cleared on a link TRB.
+ *
+ * @more_trbs_coming: Will you enqueue more TRBs before calling
+ * prepare_transfer()?
*/
-static void inc_enq(struct xhci_hcd *xhci, struct xhci_ring *ring, bool consumer)
+static void inc_enq(struct xhci_hcd *xhci, struct xhci_ring *ring,
+ bool consumer, bool more_trbs_coming)
{
u32 chain;
union xhci_trb *next;
while (last_trb(xhci, ring, ring->enq_seg, next)) {
if (!consumer) {
if (ring != xhci->event_ring) {
- if (chain) {
- next->link.control |= TRB_CHAIN;
-
- /* Give this link TRB to the hardware */
- wmb();
- next->link.control ^= TRB_CYCLE;
- } else {
+ /*
+ * If the caller doesn't plan on enqueueing more
+ * TDs before ringing the doorbell, then we
+ * don't want to give the link TRB to the
+ * hardware just yet. We'll give the link TRB
+ * back in prepare_ring() just before we enqueue
+ * the TD at the top of the ring.
+ */
+ if (!chain && !more_trbs_coming)
break;
+
+ /* If we're not dealing with 0.95 hardware,
+ * carry over the chain bit of the previous TRB
+ * (which may mean the chain bit is cleared).
+ */
+ if (!xhci_link_trb_quirk(xhci)) {
+ next->link.control &= ~TRB_CHAIN;
+ next->link.control |= chain;
}
+ /* Give this link TRB to the hardware */
+ wmb();
+ next->link.control ^= TRB_CYCLE;
}
/* Toggle the cycle bit after the last ring segment. */
if (last_trb_on_last_seg(xhci, ring, ring->enq_seg, next)) {
/*
* Generic function for queueing a TRB on a ring.
* The caller must have checked to make sure there's room on the ring.
+ *
+ * @more_trbs_coming: Will you enqueue more TRBs before calling
+ * prepare_transfer()?
*/
static void queue_trb(struct xhci_hcd *xhci, struct xhci_ring *ring,
- bool consumer,
+ bool consumer, bool more_trbs_coming,
u32 field1, u32 field2, u32 field3, u32 field4)
{
struct xhci_generic_trb *trb;
trb->field[1] = field2;
trb->field[2] = field3;
trb->field[3] = field4;
- inc_enq(xhci, ring, consumer);
+ inc_enq(xhci, ring, consumer, more_trbs_coming);
}
/*
int trb_buff_len, this_sg_len, running_total;
bool first_trb;
u64 addr;
+ bool more_trbs_coming;
struct xhci_generic_trb *start_trb;
int start_cycle;
length_field = TRB_LEN(trb_buff_len) |
remainder |
TRB_INTR_TARGET(0);
- queue_trb(xhci, ep_ring, false,
+ if (num_trbs > 1)
+ more_trbs_coming = true;
+ else
+ more_trbs_coming = false;
+ queue_trb(xhci, ep_ring, false, more_trbs_coming,
lower_32_bits(addr),
upper_32_bits(addr),
length_field,
int num_trbs;
struct xhci_generic_trb *start_trb;
bool first_trb;
+ bool more_trbs_coming;
int start_cycle;
u32 field, length_field;
length_field = TRB_LEN(trb_buff_len) |
remainder |
TRB_INTR_TARGET(0);
- queue_trb(xhci, ep_ring, false,
+ if (num_trbs > 1)
+ more_trbs_coming = true;
+ else
+ more_trbs_coming = false;
+ queue_trb(xhci, ep_ring, false, more_trbs_coming,
lower_32_bits(addr),
upper_32_bits(addr),
length_field,
/* Queue setup TRB - see section 6.4.1.2.1 */
/* FIXME better way to translate setup_packet into two u32 fields? */
setup = (struct usb_ctrlrequest *) urb->setup_packet;
- queue_trb(xhci, ep_ring, false,
+ queue_trb(xhci, ep_ring, false, true,
/* FIXME endianness is probably going to bite my ass here. */
setup->bRequestType | setup->bRequest << 8 | setup->wValue << 16,
setup->wIndex | setup->wLength << 16,
if (urb->transfer_buffer_length > 0) {
if (setup->bRequestType & USB_DIR_IN)
field |= TRB_DIR_IN;
- queue_trb(xhci, ep_ring, false,
+ queue_trb(xhci, ep_ring, false, true,
lower_32_bits(urb->transfer_dma),
upper_32_bits(urb->transfer_dma),
length_field,
field = 0;
else
field = TRB_DIR_IN;
- queue_trb(xhci, ep_ring, false,
+ queue_trb(xhci, ep_ring, false, false,
0,
0,
TRB_INTR_TARGET(0),
"unfailable commands failed.\n");
return -ENOMEM;
}
- queue_trb(xhci, xhci->cmd_ring, false, field1, field2, field3,
+ queue_trb(xhci, xhci->cmd_ring, false, false, field1, field2, field3,
field4 | xhci->cmd_ring->cycle_state);
return 0;
}
return 0;
}
#else
-#define musb_ulpi_read(a, b) NULL
-#define musb_ulpi_write(a, b, c) NULL
+#define musb_ulpi_read NULL
+#define musb_ulpi_write NULL
#endif
static struct otg_io_access_ops musb_ulpi_access = {
* @param power
*/
-#define STAGE0_MASK (MUSB_INTR_RESUME | MUSB_INTR_SESSREQ \
- | MUSB_INTR_VBUSERROR | MUSB_INTR_CONNECT \
- | MUSB_INTR_RESET)
-
static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb,
u8 devctl, u8 power)
{
handled = IRQ_HANDLED;
}
-
+#endif
if (int_usb & MUSB_INTR_SUSPEND) {
DBG(1, "SUSPEND (%s) devctl %02x power %02x\n",
otg_state_string(musb), devctl, power);
}
}
+#ifdef CONFIG_USB_MUSB_HDRC_HCD
if (int_usb & MUSB_INTR_CONNECT) {
struct usb_hcd *hcd = musb_to_hcd(musb);
void __iomem *mbase = musb->mregs;
/* the core can interrupt us for multiple reasons; docs have
* a generic interrupt flowchart to follow
*/
- if (musb->int_usb & STAGE0_MASK)
+ if (musb->int_usb)
retval |= musb_stage0_irq(musb, musb->int_usb,
devctl, power);
struct musb_context_registers {
-#ifdef CONFIG_PM
+#if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3) || \
+ defined(CONFIG_ARCH_OMAP4)
u32 otg_sysconfig, otg_forcestandby;
#endif
u8 power;
struct musb_csr_regs index_regs[MUSB_C_NUM_EPS];
};
-#ifdef CONFIG_PM
+#if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3) || \
+ defined(CONFIG_ARCH_OMAP4)
extern void musb_platform_save_context(struct musb *musb,
struct musb_context_registers *musb_context);
extern void musb_platform_restore_context(struct musb *musb,
if (mode) {
csr |= 1 << MUSB_HSDMA_MODE1_SHIFT;
BUG_ON(len < packet_sz);
-
- if (packet_sz >= 64) {
- csr |= MUSB_HSDMA_BURSTMODE_INCR16
- << MUSB_HSDMA_BURSTMODE_SHIFT;
- } else if (packet_sz >= 32) {
- csr |= MUSB_HSDMA_BURSTMODE_INCR8
- << MUSB_HSDMA_BURSTMODE_SHIFT;
- } else if (packet_sz >= 16) {
- csr |= MUSB_HSDMA_BURSTMODE_INCR4
- << MUSB_HSDMA_BURSTMODE_SHIFT;
- }
}
+ csr |= MUSB_HSDMA_BURSTMODE_INCR16
+ << MUSB_HSDMA_BURSTMODE_SHIFT;
csr |= (musb_channel->epnum << MUSB_HSDMA_ENDPOINT_SHIFT)
| (1 << MUSB_HSDMA_ENABLE_SHIFT)
static int ulpi_init(struct otg_transceiver *otg)
{
- int i, vid, pid;
-
- vid = (otg_io_read(otg, ULPI_VENDOR_ID_HIGH) << 8) |
- otg_io_read(otg, ULPI_VENDOR_ID_LOW);
- pid = (otg_io_read(otg, ULPI_PRODUCT_ID_HIGH) << 8) |
- otg_io_read(otg, ULPI_PRODUCT_ID_LOW);
+ int i, vid, pid, ret;
+ u32 ulpi_id = 0;
+
+ for (i = 0; i < 4; i++) {
+ ret = otg_io_read(otg, ULPI_PRODUCT_ID_HIGH - i);
+ if (ret < 0)
+ return ret;
+ ulpi_id = (ulpi_id << 8) | ret;
+ }
+ vid = ulpi_id & 0xffff;
+ pid = ulpi_id >> 16;
pr_info("ULPI transceiver vendor/product ID 0x%04x/0x%04x\n", vid, pid);
{ USB_DEVICE(EVOLUTION_VID, EVOLUTION_ER1_PID) },
{ USB_DEVICE(EVOLUTION_VID, EVO_HYBRID_PID) },
{ USB_DEVICE(EVOLUTION_VID, EVO_RCM4_PID) },
- { USB_DEVICE(CONTEC_VID, CONTEC_COM1USBH_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ARTEMIS_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ATIK_ATK16_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ATIK_ATK16C_PID) },
#define CONTEC_VID 0x06CE /* Vendor ID */
#define CONTEC_COM1USBH_PID 0x8311 /* COM-1(USB)H */
-/*
- * Contec products (http://www.contec.com)
- * Submitted by Daniel Sangorrin
- */
-#define CONTEC_VID 0x06CE /* Vendor ID */
-#define CONTEC_COM1USBH_PID 0x8311 /* COM-1(USB)H */
-
/*
* Definitions for B&B Electronics products.
*/
"Could not set interface, error %d\n",
retval);
retval = -ENODEV;
+ kfree(data);
}
return retval;
}
"Could not set interface, error %d\n",
retval);
retval = -ENODEV;
+ kfree(data);
}
return retval;
}
default:
dev_err(&serial->dev->dev,
"unknown number of interfaces: %d\n", nintf);
+ kfree(data);
return -ENODEV;
}
static int vt_switch;
/* Modes relevant to the GX (taken from modedb.c) */
-static struct fb_videomode gx_modedb[] __initdata = {
+static struct fb_videomode gx_modedb[] __devinitdata = {
/* 640x480-60 VESA */
{ NULL, 60, 640, 480, 39682, 48, 16, 33, 10, 96, 2,
0, FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
#ifdef CONFIG_OLPC
#include <asm/olpc.h>
-static struct fb_videomode gx_dcon_modedb[] __initdata = {
+static struct fb_videomode gx_dcon_modedb[] __devinitdata = {
/* The only mode the DCON has is 1200x900 */
{ NULL, 50, 1200, 900, 17460, 24, 8, 4, 5, 8, 3,
FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
FB_VMODE_NONINTERLACED, 0 }
};
-static void __init get_modedb(struct fb_videomode **modedb, unsigned int *size)
+static void __devinit get_modedb(struct fb_videomode **modedb,
+ unsigned int *size)
{
if (olpc_has_dcon()) {
*modedb = (struct fb_videomode *) gx_dcon_modedb;
}
#else
-static void __init get_modedb(struct fb_videomode **modedb, unsigned int *size)
+static void __devinit get_modedb(struct fb_videomode **modedb,
+ unsigned int *size)
{
*modedb = (struct fb_videomode *) gx_modedb;
*size = ARRAY_SIZE(gx_modedb);
return gx_blank_display(info, blank_mode);
}
-static int __init gxfb_map_video_memory(struct fb_info *info, struct pci_dev *dev)
+static int __devinit gxfb_map_video_memory(struct fb_info *info,
+ struct pci_dev *dev)
{
struct gxfb_par *par = info->par;
int ret;
.fb_imageblit = cfb_imageblit,
};
-static struct fb_info * __init gxfb_init_fbinfo(struct device *dev)
+static struct fb_info *__devinit gxfb_init_fbinfo(struct device *dev)
{
struct gxfb_par *par;
struct fb_info *info;
}
#endif
-static int __init gxfb_probe(struct pci_dev *pdev, const struct pci_device_id *id)
+static int __devinit gxfb_probe(struct pci_dev *pdev,
+ const struct pci_device_id *id)
{
struct gxfb_par *par;
struct fb_info *info;
return ret;
}
-static void gxfb_remove(struct pci_dev *pdev)
+static void __devexit gxfb_remove(struct pci_dev *pdev)
{
struct fb_info *info = pci_get_drvdata(pdev);
struct gxfb_par *par = info->par;
* we try to make it something sane - 640x480-60 is sane
*/
-static struct fb_videomode geode_modedb[] __initdata = {
+static struct fb_videomode geode_modedb[] __devinitdata = {
/* 640x480-60 */
{ NULL, 60, 640, 480, 39682, 48, 8, 25, 2, 88, 2,
FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
#ifdef CONFIG_OLPC
#include <asm/olpc.h>
-static struct fb_videomode olpc_dcon_modedb[] __initdata = {
+static struct fb_videomode olpc_dcon_modedb[] __devinitdata = {
/* The only mode the DCON has is 1200x900 */
{ NULL, 50, 1200, 900, 17460, 24, 8, 4, 5, 8, 3,
FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
FB_VMODE_NONINTERLACED, 0 }
};
-static void __init get_modedb(struct fb_videomode **modedb, unsigned int *size)
+static void __devinit get_modedb(struct fb_videomode **modedb,
+ unsigned int *size)
{
if (olpc_has_dcon()) {
*modedb = (struct fb_videomode *) olpc_dcon_modedb;
}
#else
-static void __init get_modedb(struct fb_videomode **modedb, unsigned int *size)
+static void __devinit get_modedb(struct fb_videomode **modedb,
+ unsigned int *size)
{
*modedb = (struct fb_videomode *) geode_modedb;
*size = ARRAY_SIZE(geode_modedb);
}
-static int __init lxfb_map_video_memory(struct fb_info *info,
+static int __devinit lxfb_map_video_memory(struct fb_info *info,
struct pci_dev *dev)
{
struct lxfb_par *par = info->par;
.fb_imageblit = cfb_imageblit,
};
-static struct fb_info * __init lxfb_init_fbinfo(struct device *dev)
+static struct fb_info * __devinit lxfb_init_fbinfo(struct device *dev)
{
struct lxfb_par *par;
struct fb_info *info;
#define lxfb_resume NULL
#endif
-static int __init lxfb_probe(struct pci_dev *pdev,
+static int __devinit lxfb_probe(struct pci_dev *pdev,
const struct pci_device_id *id)
{
struct lxfb_par *par;
return ret;
}
-static void lxfb_remove(struct pci_dev *pdev)
+static void __devexit lxfb_remove(struct pci_dev *pdev)
{
struct fb_info *info = pci_get_drvdata(pdev);
struct lxfb_par *par = info->par;
goto release_regs;
}
- nuc900_driver_clksrc_div(&pdev->dev, "ext", 0x2);
-
fbi->clk = clk_get(&pdev->dev, NULL);
if (!fbi->clk || IS_ERR(fbi->clk)) {
printk(KERN_ERR "nuc900-lcd:failed to get lcd clock source\n");
* Here we can be a bit looser than the data sections since this
* needs to only meet arch ABI requirements.
*/
-#ifdef ARCH_SLAB_MINALIGN
-#define FLAT_STACK_ALIGN (ARCH_SLAB_MINALIGN)
-#else
-#define FLAT_STACK_ALIGN (sizeof(void *))
-#endif
+#define FLAT_STACK_ALIGN max_t(unsigned long, sizeof(void *), ARCH_SLAB_MINALIGN)
#define RELOC_FAILED 0xff00ff01 /* Relocation incorrect somewhere */
#define UNLOADED_LIB 0x7ff000ff /* Placeholder for unused library */
{
while (fa) {
struct fown_struct *fown;
+ unsigned long flags;
+
if (fa->magic != FASYNC_MAGIC) {
printk(KERN_ERR "kill_fasync: bad magic number in "
"fasync_struct!\n");
return;
}
- spin_lock(&fa->fa_lock);
+ spin_lock_irqsave(&fa->fa_lock, flags);
if (fa->fa_file) {
fown = &fa->fa_file->f_owner;
/* Don't send SIGURG to processes which have not set a
if (!(sig == SIGURG && fown->signum == 0))
send_sigio(fown, fa->fa_fd, band);
}
- spin_unlock(&fa->fa_lock);
+ spin_unlock_irqrestore(&fa->fa_lock, flags);
fa = rcu_dereference(fa->fa_next);
}
}
return size;
}
+static void pad_len_spaces(struct seq_file *m, int len)
+{
+ len = 25 + sizeof(void*) * 6 - len;
+ if (len < 1)
+ len = 1;
+ seq_printf(m, "%*c", len, ' ');
+}
+
/*
* display a single VMA to a sequenced file
*/
static int nommu_vma_show(struct seq_file *m, struct vm_area_struct *vma)
{
+ struct mm_struct *mm = vma->vm_mm;
unsigned long ino = 0;
struct file *file;
dev_t dev = 0;
MAJOR(dev), MINOR(dev), ino, &len);
if (file) {
- len = 25 + sizeof(void *) * 6 - len;
- if (len < 1)
- len = 1;
- seq_printf(m, "%*c", len, ' ');
+ pad_len_spaces(m, len);
seq_path(m, &file->f_path, "");
+ } else if (mm) {
+ if (vma->vm_start <= mm->start_stack &&
+ vma->vm_end >= mm->start_stack) {
+ pad_len_spaces(m, len);
+ seq_puts(m, "[stack]");
+ }
}
seq_putc(m, '\n');
#include <linux/stat.h>
#include <linux/string.h>
#include <linux/buffer_head.h>
+#include <linux/writeback.h>
#include "sysv.h"
/* We don't trust the value of
struct inode *inode;
sysv_ino_t ino;
unsigned count;
+ struct writeback_control wbc = {
+ .sync_mode = WB_SYNC_NONE
+ };
inode = new_inode(sb);
if (!inode)
insert_inode_hash(inode);
mark_inode_dirty(inode);
- sysv_write_inode(inode, 0); /* ensure inode not allocated again */
+ sysv_write_inode(inode, &wbc); /* ensure inode not allocated again */
mark_inode_dirty(inode); /* cleared by sysv_write_inode() */
/* That's it. */
unlock_super(sb);
u32 physical;
bool is_bound;
bool is_flushed;
- bool vmalloc_flag;
/* list of agp_memory mapped to the aperture */
struct list_head mapped_list;
/* DMA-mapped addresses */
* naked functions because then mcount is called without stack and frame pointer
* being set up and there is no chance to restore the lr register to the value
* before mcount was called.
+ *
+ * The asm() bodies of naked functions often depend on standard calling conventions,
+ * therefore they must be noinline and noclone. GCC 4.[56] currently fail to enforce
+ * this, so we must do so ourselves. See GCC PR44290.
*/
-#define __naked __attribute__((naked)) notrace
+#define __naked __attribute__((naked)) noinline __noclone notrace
#define __noreturn __attribute__((noreturn))
#define _gcc_header(x) __gcc_header(linux/compiler-gcc##x.h)
#define gcc_header(x) _gcc_header(x)
#include gcc_header(__GNUC__)
+
+#if !defined(__noclone)
+#define __noclone /* not needed */
+#endif
* unreleased. Really, we need to have autoconf for the kernel.
*/
#define unreachable() __builtin_unreachable()
+
+/* Mark a function definition as prohibited from being cloned. */
+#define __noclone __attribute__((__noclone__))
+
#endif
#endif
#define FBINFO_MISC_USEREVENT 0x10000 /* event request
from userspace */
#define FBINFO_MISC_TILEBLITTING 0x20000 /* use tile blitting */
-#define FBINFO_MISC_FIRMWARE 0x40000 /* a replaceable firmware
- inited framebuffer */
/* A driver may set this flag to indicate that it does want a set_par to be
* called every time when fbcon_switch is executed. The advantage is that with
*/
#define FBINFO_MISC_ALWAYS_SETPAR 0x40000
+/* where the fb is a firmware driver, and can be replaced with a proper one */
+#define FBINFO_MISC_FIRMWARE 0x80000
/*
* Host and GPU endianness differ.
*/
static struct task_struct * futex_find_get_task(pid_t pid)
{
struct task_struct *p;
- const struct cred *cred = current_cred(), *pcred;
rcu_read_lock();
p = find_task_by_vpid(pid);
- if (!p) {
- p = ERR_PTR(-ESRCH);
- } else {
- pcred = __task_cred(p);
- if (cred->euid != pcred->euid &&
- cred->euid != pcred->uid)
- p = ERR_PTR(-ESRCH);
- else
- get_task_struct(p);
- }
+ if (p)
+ get_task_struct(p);
rcu_read_unlock();
if (!pid)
return -ESRCH;
p = futex_find_get_task(pid);
- if (IS_ERR(p))
- return PTR_ERR(p);
+ if (!p)
+ return -ESRCH;
/*
* We need to look at the task state flags to figure out,
size_t crash_get_memory_size(void)
{
- size_t size;
+ size_t size = 0;
mutex_lock(&kexec_mutex);
- size = crashk_res.end - crashk_res.start + 1;
+ if (crashk_res.end != crashk_res.start)
+ size = crashk_res.end - crashk_res.start + 1;
mutex_unlock(&kexec_mutex);
return size;
}
free_reserved_phys_range(end, crashk_res.end);
- if (start == end)
+ if ((start == end) && (crashk_res.parent != NULL))
release_resource(&crashk_res);
crashk_res.end = end - 1;
chunk = list_entry(_chunk, struct gen_pool_chunk, next_chunk);
end_bit = (chunk->end_addr - chunk->start_addr) >> order;
- end_bit -= nbits + 1;
spin_lock_irqsave(&chunk->lock, flags);
start_bit = bitmap_find_next_zero_area(chunk->bits, end_bit, 0,
static void memcg_oom_recover(struct mem_cgroup *mem)
{
- if (mem->oom_kill_disable && atomic_read(&mem->oom_lock))
+ if (atomic_read(&mem->oom_lock))
memcg_wakeup_oom(mem);
}
return -EINVAL;
}
mem->oom_kill_disable = val;
+ if (!val)
+ memcg_oom_recover(mem);
cgroup_unlock();
return 0;
}
NODEMASK_SCRATCH(scratch);
if (!scratch)
- return;
+ goto put_mpol;
/* contextualize the tmpfs mount point mempolicy */
new = mpol_new(mpol->mode, mpol->flags, &mpol->w.user_nodemask);
if (IS_ERR(new))
task_lock(current);
ret = mpol_set_nodemask(new, &mpol->w.user_nodemask, scratch);
task_unlock(current);
- mpol_put(mpol); /* drop our ref on sb mpol */
if (ret)
- goto put_free;
+ goto put_new;
/* Create pseudo-vma that contains just the policy */
memset(&pvma, 0, sizeof(struct vm_area_struct));
pvma.vm_end = TASK_SIZE; /* policy covers entire file */
mpol_set_shared_policy(sp, &pvma, new); /* adds ref */
-put_free:
+put_new:
mpol_put(new); /* drop initial ref */
free_scratch:
NODEMASK_SCRATCH_FREE(scratch);
+put_mpol:
+ mpol_put(mpol); /* drop our incoming ref on sb mpol */
}
}
git://bbs.cooldavid.org / net-next-2.6.git / commitdiff