+++ /dev/null
-/*
- This files contains card eeprom (93c46 or 93c56) programming routines,
- memory is addressed by 16 bits words.
-
- This is part of rtl8180 OpenSource driver.
- Copyright (C) Andrea Merello 2004 <andreamrl@tiscali.it>
- Released under the terms of GPL (General Public Licence)
-
- Parts of this driver are based on the GPL part of the
- official realtek driver.
-
- Parts of this driver are based on the rtl8180 driver skeleton
- from Patric Schenke & Andres Salomon.
-
- Parts of this driver are based on the Intel Pro Wireless 2100 GPL driver.
-
- We want to tanks the Authors of those projects and the Ndiswrapper
- project Authors.
-*/
-
-#include "r8180_93cx6.h"
-
-void eprom_cs(struct net_device *dev, short bit)
-{
- if(bit)
- write_nic_byte(dev, EPROM_CMD,
- (1<<EPROM_CS_SHIFT) | \
- read_nic_byte(dev, EPROM_CMD)); //enable EPROM
- else
- write_nic_byte(dev, EPROM_CMD, read_nic_byte(dev, EPROM_CMD)\
- &~(1<<EPROM_CS_SHIFT)); //disable EPROM
-
- force_pci_posting(dev);
- udelay(EPROM_DELAY);
-}
-
-
-void eprom_ck_cycle(struct net_device *dev)
-{
- write_nic_byte(dev, EPROM_CMD,
- (1<<EPROM_CK_SHIFT) | read_nic_byte(dev,EPROM_CMD));
- force_pci_posting(dev);
- udelay(EPROM_DELAY);
- write_nic_byte(dev, EPROM_CMD,
- read_nic_byte(dev, EPROM_CMD) &~ (1<<EPROM_CK_SHIFT));
- force_pci_posting(dev);
- udelay(EPROM_DELAY);
-}
-
-
-void eprom_w(struct net_device *dev,short bit)
-{
- if(bit)
- write_nic_byte(dev, EPROM_CMD, (1<<EPROM_W_SHIFT) | \
- read_nic_byte(dev,EPROM_CMD));
- else
- write_nic_byte(dev, EPROM_CMD, read_nic_byte(dev,EPROM_CMD)\
- &~(1<<EPROM_W_SHIFT));
-
- force_pci_posting(dev);
- udelay(EPROM_DELAY);
-}
-
-
-short eprom_r(struct net_device *dev)
-{
- short bit;
-
- bit=(read_nic_byte(dev, EPROM_CMD) & (1<<EPROM_R_SHIFT) );
- udelay(EPROM_DELAY);
-
- if(bit) return 1;
- return 0;
-}
-
-
-void eprom_send_bits_string(struct net_device *dev, short b[], int len)
-{
- int i;
-
- for(i=0; i<len; i++){
- eprom_w(dev, b[i]);
- eprom_ck_cycle(dev);
- }
-}
-
-
-u32 eprom_read(struct net_device *dev, u32 addr)
-{
- struct r8180_priv *priv = ieee80211_priv(dev);
- short read_cmd[]={1,1,0};
- short addr_str[8];
- int i;
- int addr_len;
- u32 ret;
-
- ret=0;
- //enable EPROM programming
- write_nic_byte(dev, EPROM_CMD,
- (EPROM_CMD_PROGRAM<<EPROM_CMD_OPERATING_MODE_SHIFT));
- force_pci_posting(dev);
- udelay(EPROM_DELAY);
-
- if (priv->epromtype==EPROM_93c56){
- addr_str[7]=addr & 1;
- addr_str[6]=addr & (1<<1);
- addr_str[5]=addr & (1<<2);
- addr_str[4]=addr & (1<<3);
- addr_str[3]=addr & (1<<4);
- addr_str[2]=addr & (1<<5);
- addr_str[1]=addr & (1<<6);
- addr_str[0]=addr & (1<<7);
- addr_len=8;
- }else{
- addr_str[5]=addr & 1;
- addr_str[4]=addr & (1<<1);
- addr_str[3]=addr & (1<<2);
- addr_str[2]=addr & (1<<3);
- addr_str[1]=addr & (1<<4);
- addr_str[0]=addr & (1<<5);
- addr_len=6;
- }
- eprom_cs(dev, 1);
- eprom_ck_cycle(dev);
- eprom_send_bits_string(dev, read_cmd, 3);
- eprom_send_bits_string(dev, addr_str, addr_len);
-
- //keep chip pin D to low state while reading.
- //I'm unsure if it is necessary, but anyway shouldn't hurt
- eprom_w(dev, 0);
-
- for(i=0;i<16;i++){
- //eeprom needs a clk cycle between writing opcode&adr
- //and reading data. (eeprom outs a dummy 0)
- eprom_ck_cycle(dev);
- ret |= (eprom_r(dev)<<(15-i));
- }
-
- eprom_cs(dev, 0);
- eprom_ck_cycle(dev);
-
- //disable EPROM programming
- write_nic_byte(dev, EPROM_CMD,
- (EPROM_CMD_NORMAL<<EPROM_CMD_OPERATING_MODE_SHIFT));
- return ret;
-}
#undef DUMMY_RX
#include <linux/syscalls.h>
+#include <linux/eeprom_93cx6.h>
#include "r8180_hw.h"
#include "r8180.h"
}
//YJ,add,080828,end
+static void rtl8187se_eeprom_register_read(struct eeprom_93cx6 *eeprom)
+{
+ struct net_device *dev = eeprom->data;
+ u8 reg = read_nic_byte(dev, EPROM_CMD);
+
+ eeprom->reg_data_in = reg & RTL818X_EEPROM_CMD_WRITE;
+ eeprom->reg_data_out = reg & RTL818X_EEPROM_CMD_READ;
+ eeprom->reg_data_clock = reg & RTL818X_EEPROM_CMD_CK;
+ eeprom->reg_chip_select = reg & RTL818X_EEPROM_CMD_CS;
+}
+
+static void rtl8187se_eeprom_register_write(struct eeprom_93cx6 *eeprom)
+{
+ struct net_device *dev = eeprom->data;
+ u8 reg = 2 << 6;
+
+ if (eeprom->reg_data_in)
+ reg |= RTL818X_EEPROM_CMD_WRITE;
+ if (eeprom->reg_data_out)
+ reg |= RTL818X_EEPROM_CMD_READ;
+ if (eeprom->reg_data_clock)
+ reg |= RTL818X_EEPROM_CMD_CK;
+ if (eeprom->reg_chip_select)
+ reg |= RTL818X_EEPROM_CMD_CS;
+
+ write_nic_byte(dev, EPROM_CMD, reg);
+ read_nic_byte(dev, EPROM_CMD);
+ udelay(10);
+}
+
short rtl8180_init(struct net_device *dev)
{
struct r8180_priv *priv = ieee80211_priv(dev);
u32 usValue;
u16 tmpu16;
int i, j;
+ struct eeprom_93cx6 eeprom;
+ u16 eeprom_val;
+
+ eeprom.data = dev;
+ eeprom.register_read = rtl8187se_eeprom_register_read;
+ eeprom.register_write = rtl8187se_eeprom_register_write;
+ eeprom.width = PCI_EEPROM_WIDTH_93C46;
- priv->channel_plan = eprom_read(dev, EEPROM_COUNTRY_CODE>>1) & 0xFF;
+ eeprom_93cx6_read(&eeprom, EEPROM_COUNTRY_CODE>>1, &eeprom_val);
+ priv->channel_plan = eeprom_val & 0xFF;
if(priv->channel_plan > COUNTRY_CODE_GLOBAL_DOMAIN){
printk("rtl8180_init:Error channel plan! Set to default.\n");
priv->channel_plan = 0;
// just for sync 85
priv->enable_gpio0 = 0;
- usValue = eprom_read(dev, EEPROM_SW_REVD_OFFSET);
+ eeprom_93cx6_read(&eeprom, EEPROM_SW_REVD_OFFSET, &eeprom_val);
+ usValue = eeprom_val;
DMESG("usValue is 0x%x\n",usValue);
//3Read AntennaDiversity
else
priv->epromtype=EPROM_93c46;
- dev->dev_addr[0]=eprom_read(dev,MAC_ADR) & 0xff;
- dev->dev_addr[1]=(eprom_read(dev,MAC_ADR) & 0xff00)>>8;
- dev->dev_addr[2]=eprom_read(dev,MAC_ADR+1) & 0xff;
- dev->dev_addr[3]=(eprom_read(dev,MAC_ADR+1) & 0xff00)>>8;
- dev->dev_addr[4]=eprom_read(dev,MAC_ADR+2) & 0xff;
- dev->dev_addr[5]=(eprom_read(dev,MAC_ADR+2) & 0xff00)>>8;
+ eeprom_93cx6_multiread(&eeprom, 0x7, (__le16 *)
+ dev->dev_addr, 3);
for(i=1,j=0; i<14; i+=2,j++){
- word = eprom_read(dev,EPROM_TXPW_CH1_2 + j);
+ eeprom_93cx6_read(&eeprom, EPROM_TXPW_CH1_2 + j, &word);
priv->chtxpwr[i]=word & 0xff;
priv->chtxpwr[i+1]=(word & 0xff00)>>8;
}
for (i = 1, j = 0; i < 14; i += 2, j++) {
- word = eprom_read(dev, EPROM_TXPW_OFDM_CH1_2 + j);
+ eeprom_93cx6_read(&eeprom, EPROM_TXPW_OFDM_CH1_2 + j, &word);
priv->chtxpwr_ofdm[i] = word & 0xff;
priv->chtxpwr_ofdm[i+1] = (word & 0xff00) >> 8;
}
/* 3Read crystal calibtration and thermal meter indication on 87SE. */
+ eeprom_93cx6_read(&eeprom, EEPROM_RSV>>1, &tmpu16);
- tmpu16 = eprom_read(dev, EEPROM_RSV >> 1);
/* Crystal calibration for Xin and Xout resp. */
priv->XtalCal_Xout = tmpu16 & EEPROM_XTAL_CAL_XOUT_MASK;
priv->XtalCal_Xin = (tmpu16 & EEPROM_XTAL_CAL_XIN_MASK) >> 4;
if ((tmpu16 & EEPROM_THERMAL_METER_ENABLE) >> 13)
priv->bTxPowerTrack = true;
- word = eprom_read(dev,EPROM_TXPW_BASE);
+ eeprom_93cx6_read(&eeprom, EPROM_TXPW_BASE, &word);
priv->cck_txpwr_base = word & 0xf;
priv->ofdm_txpwr_base = (word>>4) & 0xf;
- version = eprom_read(dev,EPROM_VERSION);
+ eeprom_93cx6_read(&eeprom, EPROM_VERSION, &version);
DMESG("EEPROM version %x",version);
priv->rcr_csense = 3;
- priv->cs_treshold = (eprom_read(dev, ENERGY_TRESHOLD) & 0xff00) >> 8;
+ eeprom_93cx6_read(&eeprom, ENERGY_TRESHOLD, &eeprom_val);
+ priv->cs_treshold = (eeprom_val & 0xff00) >> 8;
- priv->rf_chip = 0xff & eprom_read(dev, RFCHIPID);
+ eeprom_93cx6_read(&eeprom, RFCHIPID, &eeprom_val);
+ priv->rf_chip = 0xff & eeprom_val;
priv->rf_chip = RF_ZEBRA4;
priv->rf_sleep = rtl8225z4_rf_sleep;
git://bbs.cooldavid.org / net-next-2.6.git / commitdiff