kirkwood_pcie_id(&dev, &rev);
- if ((dev == MV88F6281_DEV_ID && (rev == MV88F6281_REV_A0 ||
- rev == MV88F6281_REV_A1)) ||
- (dev == MV88F6282_DEV_ID))
- return 200000000;
+ if (dev == MV88F6281_DEV_ID || dev == MV88F6282_DEV_ID)
+ if (((readl(SAMPLE_AT_RESET) >> 21) & 1) == 0)
+ return 200000000;
return 166666667;
}
},
};
+static struct platform_device kirkwood_pcm_device = {
+ .name = "kirkwood-pcm-audio",
+ .id = -1,
+};
+
void __init kirkwood_audio_init(void)
{
kirkwood_clk_ctrl |= CGC_AUDIO;
platform_device_register(&kirkwood_i2s_device);
+ platform_device_register(&kirkwood_pcm_device);
}
/*****************************************************************************
}
MACHINE_START(D2NET_V2, "LaCie d2 Network v2")
- .phys_io = KIRKWOOD_REGS_PHYS_BASE,
- .io_pg_offst = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
.boot_params = 0x00000100,
.init_machine = d2net_v2_init,
.map_io = kirkwood_map_io,
.init_irq = kirkwood_init_irq,
- .timer = &lacie_v2_timer,
+ .timer = &kirkwood_timer,
MACHINE_END
#include <linux/gpio.h>
#include <linux/gpio_keys.h>
#include <linux/leds.h>
+#include <linux/gpio-fan.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <mach/kirkwood.h>
},
};
+/*****************************************************************************
+ * GPIO fan
+ ****************************************************************************/
+
+/* Designed for fan 40x40x16: ADDA AD0412LB-D50 6000rpm@12v */
+static struct gpio_fan_speed netspace_max_v2_fan_speed[] = {
+ { 0, 0 },
+ { 1500, 15 },
+ { 1700, 14 },
+ { 1800, 13 },
+ { 2100, 12 },
+ { 3100, 11 },
+ { 3300, 10 },
+ { 4300, 9 },
+ { 5500, 8 },
+};
+
+static unsigned netspace_max_v2_fan_ctrl[] = { 22, 7, 33, 23 };
+
+static struct gpio_fan_alarm netspace_max_v2_fan_alarm = {
+ .gpio = 25,
+ .active_low = 1,
+};
+
+static struct gpio_fan_platform_data netspace_max_v2_fan_data = {
+ .num_ctrl = ARRAY_SIZE(netspace_max_v2_fan_ctrl),
+ .ctrl = netspace_max_v2_fan_ctrl,
+ .alarm = &netspace_max_v2_fan_alarm,
+ .num_speed = ARRAY_SIZE(netspace_max_v2_fan_speed),
+ .speed = netspace_max_v2_fan_speed,
+};
+
+static struct platform_device netspace_max_v2_gpio_fan = {
+ .name = "gpio-fan",
+ .id = -1,
+ .dev = {
+ .platform_data = &netspace_max_v2_fan_data,
+ },
+};
+
/*****************************************************************************
* General Setup
****************************************************************************/
platform_device_register(&netspace_v2_leds);
platform_device_register(&netspace_v2_gpio_leds);
platform_device_register(&netspace_v2_gpio_buttons);
+ if (machine_is_netspace_max_v2())
+ platform_device_register(&netspace_max_v2_gpio_fan);
if (gpio_request(NETSPACE_V2_GPIO_POWER_OFF, "power-off") == 0 &&
gpio_direction_output(NETSPACE_V2_GPIO_POWER_OFF, 0) == 0)
#ifdef CONFIG_MACH_NETSPACE_V2
MACHINE_START(NETSPACE_V2, "LaCie Network Space v2")
- .phys_io = KIRKWOOD_REGS_PHYS_BASE,
- .io_pg_offst = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
.boot_params = 0x00000100,
.init_machine = netspace_v2_init,
.map_io = kirkwood_map_io,
.init_irq = kirkwood_init_irq,
- .timer = &lacie_v2_timer,
+ .timer = &kirkwood_timer,
MACHINE_END
#endif
#ifdef CONFIG_MACH_INETSPACE_V2
MACHINE_START(INETSPACE_V2, "LaCie Internet Space v2")
- .phys_io = KIRKWOOD_REGS_PHYS_BASE,
- .io_pg_offst = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
.boot_params = 0x00000100,
.init_machine = netspace_v2_init,
.map_io = kirkwood_map_io,
.init_irq = kirkwood_init_irq,
- .timer = &lacie_v2_timer,
+ .timer = &kirkwood_timer,
MACHINE_END
#endif
#ifdef CONFIG_MACH_NETSPACE_MAX_V2
MACHINE_START(NETSPACE_MAX_V2, "LaCie Network Space Max v2")
- .phys_io = KIRKWOOD_REGS_PHYS_BASE,
- .io_pg_offst = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
.boot_params = 0x00000100,
.init_machine = netspace_v2_init,
.map_io = kirkwood_map_io,
.init_irq = kirkwood_init_irq,
- .timer = &lacie_v2_timer,
+ .timer = &kirkwood_timer,
MACHINE_END
#endif
#ifdef CONFIG_MACH_NET2BIG_V2
MACHINE_START(NET2BIG_V2, "LaCie 2Big Network v2")
- .phys_io = KIRKWOOD_REGS_PHYS_BASE,
- .io_pg_offst = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
.boot_params = 0x00000100,
.init_machine = netxbig_v2_init,
.map_io = kirkwood_map_io,
.init_irq = kirkwood_init_irq,
- .timer = &lacie_v2_timer,
+ .timer = &kirkwood_timer,
MACHINE_END
#endif
#ifdef CONFIG_MACH_NET5BIG_V2
MACHINE_START(NET5BIG_V2, "LaCie 5Big Network v2")
- .phys_io = KIRKWOOD_REGS_PHYS_BASE,
- .io_pg_offst = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
.boot_params = 0x00000100,
.init_machine = netxbig_v2_init,
.map_io = kirkwood_map_io,
.init_irq = kirkwood_init_irq,
- .timer = &lacie_v2_timer,
+ .timer = &kirkwood_timer,
MACHINE_END
#endif
#include "mpp.h"
#include "tsx1x-common.h"
+ /* for the PCIe reset workaround */
+ #include <plat/pcie.h>
+
+
#define QNAP_TS41X_JUMPER_JP1 45
static struct i2c_board_info __initdata qnap_ts41x_i2c_rtc = {
static int __init ts41x_pci_init(void)
{
- if (machine_is_ts41x())
+ if (machine_is_ts41x()) {
+ /*
+ * Without this explicit reset, the PCIe SATA controller
+ * (Marvell 88sx7042/sata_mv) is known to stop working
+ * after a few minutes.
+ */
+ orion_pcie_reset((void __iomem *)PCIE_VIRT_BASE);
+
kirkwood_pcie_init(KW_PCIE0);
+ }
return 0;
}
MACHINE_START(TS41X, "QNAP TS-41x")
/* Maintainer: Martin Michlmayr <tbm@cyrius.com> */
- .phys_io = KIRKWOOD_REGS_PHYS_BASE,
- .io_pg_offst = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
.boot_params = 0x00000100,
.init_machine = qnap_ts41x_init,
.map_io = kirkwood_map_io,
static struct resource ts78xx_ts_nand_resources = {
.start = TS_NAND_DATA,
.end = TS_NAND_DATA + 4,
- .flags = IORESOURCE_IO,
+ .flags = IORESOURCE_MEM,
};
static struct platform_device ts78xx_ts_nand_device = {
MACHINE_START(TS78XX, "Technologic Systems TS-78xx SBC")
/* Maintainer: Alexander Clouter <alex@digriz.org.uk> */
- .phys_io = ORION5X_REGS_PHYS_BASE,
- .io_pg_offst = ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC,
.boot_params = 0x00000100,
.init_machine = ts78xx_init,
.map_io = ts78xx_map_io,