* 'idle-release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-idle-2.6:
intel_idle: Voluntary leave_mm before entering deeper
acpi_idle: add missing \n to printk
intel_idle: add missing __percpu markup
intel_idle: Change mode 755 => 644
cpuidle: Fix typos
intel_idle: PCI quirk to prevent Lenovo Ideapad s10-3 boot hang
D: portions of the Linux Security Module (LSM) framework and security modules
N: Petr Vandrovec
-E: vandrove@vc.cvut.cz
+E: petr@vandrovec.name
D: Small contributions to ncpfs
D: Matrox framebuffer driver
-S: Chudenicka 8
-S: 10200 Prague 10, Hostivar
-S: Czech Republic
+S: 21513 Conradia Ct
+S: Cupertino, CA 95014
+S: USA
N: Thibaut Varene
E: T-Bone@parisc-linux.org
S: Maintained
F: arch/arm/mach-s3c6410/
+ARM/S5P ARM ARCHITECTURES
+M: Kukjin Kim <kgene.kim@samsung.com>
+L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+L: linux-samsung-soc@vger.kernel.org (moderated for non-subscribers)
+S: Maintained
+F: arch/arm/mach-s5p*/
+
ARM/SHMOBILE ARM ARCHITECTURE
M: Paul Mundt <lethal@linux-sh.org>
M: Magnus Damm <magnus.damm@gmail.com>
S: Supported
MATROX FRAMEBUFFER DRIVER
-M: Petr Vandrovec <vandrove@vc.cvut.cz>
L: linux-fbdev@vger.kernel.org
-S: Maintained
+S: Orphan
F: drivers/video/matrox/matroxfb_*
F: include/linux/matroxfb.h
F: drivers/net/natsemi.c
NCP FILESYSTEM
-M: Petr Vandrovec <vandrove@vc.cvut.cz>
-S: Maintained
+M: Petr Vandrovec <petr@vandrovec.name>
+S: Odd Fixes
F: fs/ncpfs/
NCR DUAL 700 SCSI DRIVER (MICROCHANNEL)
sigset_t mask;
unsigned long res;
- siginitset(&mask, newmask & ~_BLOCKABLE);
+ siginitset(&mask, newmask & _BLOCKABLE);
res = sigprocmask(how, &mask, &oldmask);
if (!res) {
force_successful_syscall_return();
config OMAP_DEBUG_LEDS
bool
depends on OMAP_DEBUG_DEVICES
- default y if LEDS
+ default y if LEDS_CLASS
config OMAP_RESET_CLOCKS
bool "Reset unused clocks during boot"
/* Writing zero to RSYNC_ERR clears the IRQ */
MCBSP_WRITE(mcbsp_rx, SPCR1, MCBSP_READ_CACHE(mcbsp_rx, SPCR1));
} else {
- complete(&mcbsp_rx->tx_irq_completion);
+ complete(&mcbsp_rx->rx_irq_completion);
}
return IRQ_HANDLED;
void mac_mksound( unsigned int freq, unsigned int length )
{
__u32 cfreq = ( freq << 5 ) / 468;
- __u32 flags;
+ unsigned long flags;
int i;
if ( mac_special_bell == NULL )
*/
static void mac_quadra_start_bell( unsigned int freq, unsigned int length, unsigned int volume )
{
- __u32 flags;
+ unsigned long flags;
/* if the bell is already ringing, ring longer */
if ( mac_bell_duration > 0 )
static void mac_quadra_ring_bell( unsigned long ignored )
{
int i, count = mac_asc_samplespersec / HZ;
- __u32 flags;
+ unsigned long flags;
/*
* we neither want a sound buffer overflow nor underflow, so we need to match
sh_chan = to_sh_chan(chan);
param = chan->private;
- slave_addr = param->config->addr;
/* Someone calling slave DMA on a public channel? */
if (!param || !sg_len) {
return NULL;
}
+ slave_addr = param->config->addr;
+
/*
* if (param != NULL), this is a successfully requested slave channel,
* therefore param->config != NULL too.
ATTR_COUNTER(0),
ATTR_COUNTER(1),
ATTR_COUNTER(2),
+ { .attr = { .name = NULL } }
};
static struct mcidev_sysfs_group i7core_udimm_counters = {
irq_tsc = cache_tsc;
for (i = 0; i < ARRAY_SIZE(max8925_irqs); i++) {
irq_data = &max8925_irqs[i];
+ /* 1 -- disable, 0 -- enable */
switch (irq_data->mask_reg) {
case MAX8925_CHG_IRQ1_MASK:
- irq_chg[0] &= irq_data->enable;
+ irq_chg[0] &= ~irq_data->enable;
break;
case MAX8925_CHG_IRQ2_MASK:
- irq_chg[1] &= irq_data->enable;
+ irq_chg[1] &= ~irq_data->enable;
break;
case MAX8925_ON_OFF_IRQ1_MASK:
- irq_on[0] &= irq_data->enable;
+ irq_on[0] &= ~irq_data->enable;
break;
case MAX8925_ON_OFF_IRQ2_MASK:
- irq_on[1] &= irq_data->enable;
+ irq_on[1] &= ~irq_data->enable;
break;
case MAX8925_RTC_IRQ_MASK:
- irq_rtc &= irq_data->enable;
+ irq_rtc &= ~irq_data->enable;
break;
case MAX8925_TSC_IRQ_MASK:
- irq_tsc &= irq_data->enable;
+ irq_tsc &= ~irq_data->enable;
break;
default:
dev_err(chip->dev, "wrong IRQ\n");
irq = irq - wm831x->irq_base;
- if (irq < WM831X_IRQ_GPIO_1 || irq > WM831X_IRQ_GPIO_11)
- return -EINVAL;
+ if (irq < WM831X_IRQ_GPIO_1 || irq > WM831X_IRQ_GPIO_11) {
+ /* Ignore internal-only IRQs */
+ if (irq >= 0 && irq < WM831X_NUM_IRQS)
+ return 0;
+ else
+ return -EINVAL;
+ }
switch (type) {
case IRQ_TYPE_EDGE_BOTH:
prefetch_status = gpmc_read_status(GPMC_PREFETCH_COUNT);
} while (prefetch_status);
/* disable and stop the PFPW engine */
- gpmc_prefetch_reset();
+ gpmc_prefetch_reset(info->gpmc_cs);
dma_unmap_single(&info->pdev->dev, dma_addr, len, dir);
return 0;
#include <linux/init.h>
#include <linux/console.h>
#include <linux/sysrq.h>
+#include <linux/slab.h>
#include <linux/serial_reg.h>
#include <linux/circ_buf.h>
#include <linux/delay.h>
#include <linux/module.h>
#include <linux/ioport.h>
+#include <linux/irq.h>
#include <linux/init.h>
#include <linux/console.h>
#include <linux/sysrq.h>
}
/* Fast symlinks can't be large */
- len = strlen(target);
+ len = strnlen(target, ocfs2_fast_symlink_chars(inode->i_sb));
link = kzalloc(len + 1, GFP_NOFS);
if (!link) {
status = -ENOMEM;
INF("auxv", S_IRUSR, proc_pid_auxv),
ONE("status", S_IRUGO, proc_pid_status),
ONE("personality", S_IRUSR, proc_pid_personality),
- INF("limits", S_IRUSR, proc_pid_limits),
+ INF("limits", S_IRUGO, proc_pid_limits),
#ifdef CONFIG_SCHED_DEBUG
REG("sched", S_IRUGO|S_IWUSR, proc_pid_sched_operations),
#endif
INF("auxv", S_IRUSR, proc_pid_auxv),
ONE("status", S_IRUGO, proc_pid_status),
ONE("personality", S_IRUSR, proc_pid_personality),
- INF("limits", S_IRUSR, proc_pid_limits),
+ INF("limits", S_IRUGO, proc_pid_limits),
#ifdef CONFIG_SCHED_DEBUG
REG("sched", S_IRUGO|S_IWUSR, proc_pid_sched_operations),
#endif
int reiserfs_unpack(struct inode *inode, struct file *filp)
{
int retval = 0;
+ int depth;
int index;
struct page *page;
struct address_space *mapping;
/* we need to make sure nobody is changing the file size beneath
** us
*/
- mutex_lock(&inode->i_mutex);
- reiserfs_write_lock(inode->i_sb);
+ reiserfs_mutex_lock_safe(&inode->i_mutex, inode->i_sb);
+ depth = reiserfs_write_lock_once(inode->i_sb);
write_from = inode->i_size & (blocksize - 1);
/* if we are on a block boundary, we are already unpacked. */
out:
mutex_unlock(&inode->i_mutex);
- reiserfs_write_unlock(inode->i_sb);
+ reiserfs_write_unlock_once(inode->i_sb, depth);
return retval;
}
new_ctx = kmem_zalloc(sizeof(*new_ctx), KM_SLEEP|KM_NOFS);
new_ctx->ticket = xlog_cil_ticket_alloc(log);
- /* lock out transaction commit, but don't block on background push */
+ /*
+ * Lock out transaction commit, but don't block for background pushes
+ * unless we are well over the CIL space limit. See the definition of
+ * XLOG_CIL_HARD_SPACE_LIMIT() for the full explanation of the logic
+ * used here.
+ */
if (!down_write_trylock(&cil->xc_ctx_lock)) {
- if (!push_seq)
+ if (!push_seq &&
+ cil->xc_ctx->space_used < XLOG_CIL_HARD_SPACE_LIMIT(log))
goto out_free_ticket;
down_write(&cil->xc_ctx_lock);
}
goto out_skip;
/* check for a previously pushed seqeunce */
- if (push_seq < cil->xc_ctx->sequence)
+ if (push_seq && push_seq < cil->xc_ctx->sequence)
goto out_skip;
/*
};
/*
- * The amount of log space we should the CIL to aggregate is difficult to size.
- * Whatever we chose we have to make we can get a reservation for the log space
- * effectively, that it is large enough to capture sufficient relogging to
- * reduce log buffer IO significantly, but it is not too large for the log or
- * induces too much latency when writing out through the iclogs. We track both
- * space consumed and the number of vectors in the checkpoint context, so we
- * need to decide which to use for limiting.
+ * The amount of log space we allow the CIL to aggregate is difficult to size.
+ * Whatever we choose, we have to make sure we can get a reservation for the
+ * log space effectively, that it is large enough to capture sufficient
+ * relogging to reduce log buffer IO significantly, but it is not too large for
+ * the log or induces too much latency when writing out through the iclogs. We
+ * track both space consumed and the number of vectors in the checkpoint
+ * context, so we need to decide which to use for limiting.
*
* Every log buffer we write out during a push needs a header reserved, which
* is at least one sector and more for v2 logs. Hence we need a reservation of
* checkpoint transaction ticket is specific to the checkpoint context, rather
* than the CIL itself.
*
- * With dynamic reservations, we can basically make up arbitrary limits for the
- * checkpoint size so long as they don't violate any other size rules. Hence
- * the initial maximum size for the checkpoint transaction will be set to a
- * quarter of the log or 8MB, which ever is smaller. 8MB is an arbitrary limit
- * right now based on the latency of writing out a large amount of data through
- * the circular iclog buffers.
+ * With dynamic reservations, we can effectively make up arbitrary limits for
+ * the checkpoint size so long as they don't violate any other size rules.
+ * Recovery imposes a rule that no transaction exceed half the log, so we are
+ * limited by that. Furthermore, the log transaction reservation subsystem
+ * tries to keep 25% of the log free, so we need to keep below that limit or we
+ * risk running out of free log space to start any new transactions.
+ *
+ * In order to keep background CIL push efficient, we will set a lower
+ * threshold at which background pushing is attempted without blocking current
+ * transaction commits. A separate, higher bound defines when CIL pushes are
+ * enforced to ensure we stay within our maximum checkpoint size bounds.
+ * threshold, yet give us plenty of space for aggregation on large logs.
*/
-
-#define XLOG_CIL_SPACE_LIMIT(log) \
- (min((log->l_logsize >> 2), (8 * 1024 * 1024)))
+#define XLOG_CIL_SPACE_LIMIT(log) (log->l_logsize >> 3)
+#define XLOG_CIL_HARD_SPACE_LIMIT(log) (3 * (log->l_logsize >> 4))
/*
* The reservation head lsn is not made up of a cycle number and block number.
return (dma->max_pq & DMA_HAS_PQ_CONTINUE) == DMA_HAS_PQ_CONTINUE;
}
-static unsigned short dma_dev_to_maxpq(struct dma_device *dma)
+static inline unsigned short dma_dev_to_maxpq(struct dma_device *dma)
{
return dma->max_pq & ~DMA_HAS_PQ_CONTINUE;
}
{
struct semid_ds out;
+ memset(&out, 0, sizeof(out));
+
ipc64_perm_to_ipc_perm(&in->sem_perm, &out.sem_perm);
out.sem_otime = in->sem_otime;
n = setup_sgl_buf(sgl, fifo->data + off, nents, l);
n += setup_sgl_buf(sgl + n, fifo->data, nents - n, len - l);
- if (n)
- sg_mark_end(sgl + n - 1);
return n;
}
* element comparison is needed, so the client's cmp()
* routine can invoke cond_resched() periodically.
*/
- (*cmp)(priv, tail, tail);
+ (*cmp)(priv, tail->next, tail->next);
tail->next->prev = tail;
tail = tail->next;
{
int i;
unsigned int ret;
+ unsigned int nents;
struct scatterlist sg[10];
printk(KERN_INFO "DMA fifo test start\n");
* byte at the beginning, after the kfifo_skip().
*/
sg_init_table(sg, ARRAY_SIZE(sg));
- ret = kfifo_dma_in_prepare(&fifo, sg, ARRAY_SIZE(sg), FIFO_SIZE);
- printk(KERN_INFO "DMA sgl entries: %d\n", ret);
- if (!ret) {
+ nents = kfifo_dma_in_prepare(&fifo, sg, ARRAY_SIZE(sg), FIFO_SIZE);
+ printk(KERN_INFO "DMA sgl entries: %d\n", nents);
+ if (!nents) {
/* fifo is full and no sgl was created */
printk(KERN_WARNING "error kfifo_dma_in_prepare\n");
return -EIO;
/* receive data */
printk(KERN_INFO "scatterlist for receive:\n");
- for (i = 0; i < ARRAY_SIZE(sg); i++) {
+ for (i = 0; i < nents; i++) {
printk(KERN_INFO
"sg[%d] -> "
"page_link 0x%.8lx offset 0x%.8x length 0x%.8x\n",
kfifo_dma_in_finish(&fifo, ret);
/* Prepare to transmit data, example: 8 bytes */
- ret = kfifo_dma_out_prepare(&fifo, sg, ARRAY_SIZE(sg), 8);
- printk(KERN_INFO "DMA sgl entries: %d\n", ret);
- if (!ret) {
+ nents = kfifo_dma_out_prepare(&fifo, sg, ARRAY_SIZE(sg), 8);
+ printk(KERN_INFO "DMA sgl entries: %d\n", nents);
+ if (!nents) {
/* no data was available and no sgl was created */
printk(KERN_WARNING "error kfifo_dma_out_prepare\n");
return -EIO;
}
printk(KERN_INFO "scatterlist for transmit:\n");
- for (i = 0; i < ARRAY_SIZE(sg); i++) {
+ for (i = 0; i < nents; i++) {
printk(KERN_INFO
"sg[%d] -> "
"page_link 0x%.8lx offset 0x%.8x length 0x%.8x\n",
git://bbs.cooldavid.org / net-next-2.6.git / commitdiff