tg3: Set card 57765 card reader MRRS to 1024B

This patch sets the Maximum Read Request Size for the card reader
function to 1024 bytes to prevent an SD controller lockup.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Reviewed-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index 4ae01b3799f47ae142541fad0f0e7fa3d5a42fd9..a0ab89eb8bcc3fc52d352244cb91120e38995fe6 100644 (file)
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -7704,6 +7704,8 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy)
            GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57765) {
                val = tr32(TG3PCI_DMA_RW_CTRL) &
                      ~DMA_RWCTRL_DIS_CACHE_ALIGNMENT;
+               if (tp->pci_chip_rev_id == CHIPREV_ID_57765_A0)
+                       val &= ~DMA_RWCTRL_CRDRDR_RDMA_MRRS_MSK;
                tw32(TG3PCI_DMA_RW_CTRL, val | tp->dma_rwctrl);
        } else if (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5784 &&
                   GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5761) {

diff --git a/drivers/net/tg3.h b/drivers/net/tg3.h
index 8a6012ab23ffff3d7448344e6da286768167646b..9e7fe0e7cdb865fda9ae6a6018b764390a738adb 100644 (file)
--- a/drivers/net/tg3.h
+++ b/drivers/net/tg3.h
@@ -183,6 +183,7 @@
 #define   METAL_REV_B2                  0x02
 #define TG3PCI_DMA_RW_CTRL             0x0000006c
 #define  DMA_RWCTRL_DIS_CACHE_ALIGNMENT  0x00000001
+#define  DMA_RWCTRL_CRDRDR_RDMA_MRRS_MSK 0x00000380
 #define  DMA_RWCTRL_READ_BNDRY_MASK     0x00000700
 #define  DMA_RWCTRL_READ_BNDRY_DISAB    0x00000000
 #define  DMA_RWCTRL_READ_BNDRY_16       0x00000100