]> bbs.cooldavid.org Git - net-next-2.6.git/blob - fs/ubifs/io.c
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/vapier...
[net-next-2.6.git] / fs / ubifs / io.c
1 /*
2  * This file is part of UBIFS.
3  *
4  * Copyright (C) 2006-2008 Nokia Corporation.
5  * Copyright (C) 2006, 2007 University of Szeged, Hungary
6  *
7  * This program is free software; you can redistribute it and/or modify it
8  * under the terms of the GNU General Public License version 2 as published by
9  * the Free Software Foundation.
10  *
11  * This program is distributed in the hope that it will be useful, but WITHOUT
12  * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
13  * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
14  * more details.
15  *
16  * You should have received a copy of the GNU General Public License along with
17  * this program; if not, write to the Free Software Foundation, Inc., 51
18  * Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
19  *
20  * Authors: Artem Bityutskiy (Битюцкий Артём)
21  *          Adrian Hunter
22  *          Zoltan Sogor
23  */
24
25 /*
26  * This file implements UBIFS I/O subsystem which provides various I/O-related
27  * helper functions (reading/writing/checking/validating nodes) and implements
28  * write-buffering support. Write buffers help to save space which otherwise
29  * would have been wasted for padding to the nearest minimal I/O unit boundary.
30  * Instead, data first goes to the write-buffer and is flushed when the
31  * buffer is full or when it is not used for some time (by timer). This is
32  * similar to the mechanism is used by JFFS2.
33  *
34  * Write-buffers are defined by 'struct ubifs_wbuf' objects and protected by
35  * mutexes defined inside these objects. Since sometimes upper-level code
36  * has to lock the write-buffer (e.g. journal space reservation code), many
37  * functions related to write-buffers have "nolock" suffix which means that the
38  * caller has to lock the write-buffer before calling this function.
39  *
40  * UBIFS stores nodes at 64 bit-aligned addresses. If the node length is not
41  * aligned, UBIFS starts the next node from the aligned address, and the padded
42  * bytes may contain any rubbish. In other words, UBIFS does not put padding
43  * bytes in those small gaps. Common headers of nodes store real node lengths,
44  * not aligned lengths. Indexing nodes also store real lengths in branches.
45  *
46  * UBIFS uses padding when it pads to the next min. I/O unit. In this case it
47  * uses padding nodes or padding bytes, if the padding node does not fit.
48  *
49  * All UBIFS nodes are protected by CRC checksums and UBIFS checks all nodes
50  * every time they are read from the flash media.
51  */
52
53 #include <linux/crc32.h>
54 #include <linux/slab.h>
55 #include "ubifs.h"
56
57 /**
58  * ubifs_ro_mode - switch UBIFS to read read-only mode.
59  * @c: UBIFS file-system description object
60  * @err: error code which is the reason of switching to R/O mode
61  */
62 void ubifs_ro_mode(struct ubifs_info *c, int err)
63 {
64         if (!c->ro_error) {
65                 c->ro_error = 1;
66                 c->no_chk_data_crc = 0;
67                 c->vfs_sb->s_flags |= MS_RDONLY;
68                 ubifs_warn("switched to read-only mode, error %d", err);
69                 dbg_dump_stack();
70         }
71 }
72
73 /**
74  * ubifs_check_node - check node.
75  * @c: UBIFS file-system description object
76  * @buf: node to check
77  * @lnum: logical eraseblock number
78  * @offs: offset within the logical eraseblock
79  * @quiet: print no messages
80  * @must_chk_crc: indicates whether to always check the CRC
81  *
82  * This function checks node magic number and CRC checksum. This function also
83  * validates node length to prevent UBIFS from becoming crazy when an attacker
84  * feeds it a file-system image with incorrect nodes. For example, too large
85  * node length in the common header could cause UBIFS to read memory outside of
86  * allocated buffer when checking the CRC checksum.
87  *
88  * This function may skip data nodes CRC checking if @c->no_chk_data_crc is
89  * true, which is controlled by corresponding UBIFS mount option. However, if
90  * @must_chk_crc is true, then @c->no_chk_data_crc is ignored and CRC is
91  * checked. Similarly, if @c->always_chk_crc is true, @c->no_chk_data_crc is
92  * ignored and CRC is checked.
93  *
94  * This function returns zero in case of success and %-EUCLEAN in case of bad
95  * CRC or magic.
96  */
97 int ubifs_check_node(const struct ubifs_info *c, const void *buf, int lnum,
98                      int offs, int quiet, int must_chk_crc)
99 {
100         int err = -EINVAL, type, node_len;
101         uint32_t crc, node_crc, magic;
102         const struct ubifs_ch *ch = buf;
103
104         ubifs_assert(lnum >= 0 && lnum < c->leb_cnt && offs >= 0);
105         ubifs_assert(!(offs & 7) && offs < c->leb_size);
106
107         magic = le32_to_cpu(ch->magic);
108         if (magic != UBIFS_NODE_MAGIC) {
109                 if (!quiet)
110                         ubifs_err("bad magic %#08x, expected %#08x",
111                                   magic, UBIFS_NODE_MAGIC);
112                 err = -EUCLEAN;
113                 goto out;
114         }
115
116         type = ch->node_type;
117         if (type < 0 || type >= UBIFS_NODE_TYPES_CNT) {
118                 if (!quiet)
119                         ubifs_err("bad node type %d", type);
120                 goto out;
121         }
122
123         node_len = le32_to_cpu(ch->len);
124         if (node_len + offs > c->leb_size)
125                 goto out_len;
126
127         if (c->ranges[type].max_len == 0) {
128                 if (node_len != c->ranges[type].len)
129                         goto out_len;
130         } else if (node_len < c->ranges[type].min_len ||
131                    node_len > c->ranges[type].max_len)
132                 goto out_len;
133
134         if (!must_chk_crc && type == UBIFS_DATA_NODE && !c->always_chk_crc &&
135              c->no_chk_data_crc)
136                 return 0;
137
138         crc = crc32(UBIFS_CRC32_INIT, buf + 8, node_len - 8);
139         node_crc = le32_to_cpu(ch->crc);
140         if (crc != node_crc) {
141                 if (!quiet)
142                         ubifs_err("bad CRC: calculated %#08x, read %#08x",
143                                   crc, node_crc);
144                 err = -EUCLEAN;
145                 goto out;
146         }
147
148         return 0;
149
150 out_len:
151         if (!quiet)
152                 ubifs_err("bad node length %d", node_len);
153 out:
154         if (!quiet) {
155                 ubifs_err("bad node at LEB %d:%d", lnum, offs);
156                 dbg_dump_node(c, buf);
157                 dbg_dump_stack();
158         }
159         return err;
160 }
161
162 /**
163  * ubifs_pad - pad flash space.
164  * @c: UBIFS file-system description object
165  * @buf: buffer to put padding to
166  * @pad: how many bytes to pad
167  *
168  * The flash media obliges us to write only in chunks of %c->min_io_size and
169  * when we have to write less data we add padding node to the write-buffer and
170  * pad it to the next minimal I/O unit's boundary. Padding nodes help when the
171  * media is being scanned. If the amount of wasted space is not enough to fit a
172  * padding node which takes %UBIFS_PAD_NODE_SZ bytes, we write padding bytes
173  * pattern (%UBIFS_PADDING_BYTE).
174  *
175  * Padding nodes are also used to fill gaps when the "commit-in-gaps" method is
176  * used.
177  */
178 void ubifs_pad(const struct ubifs_info *c, void *buf, int pad)
179 {
180         uint32_t crc;
181
182         ubifs_assert(pad >= 0 && !(pad & 7));
183
184         if (pad >= UBIFS_PAD_NODE_SZ) {
185                 struct ubifs_ch *ch = buf;
186                 struct ubifs_pad_node *pad_node = buf;
187
188                 ch->magic = cpu_to_le32(UBIFS_NODE_MAGIC);
189                 ch->node_type = UBIFS_PAD_NODE;
190                 ch->group_type = UBIFS_NO_NODE_GROUP;
191                 ch->padding[0] = ch->padding[1] = 0;
192                 ch->sqnum = 0;
193                 ch->len = cpu_to_le32(UBIFS_PAD_NODE_SZ);
194                 pad -= UBIFS_PAD_NODE_SZ;
195                 pad_node->pad_len = cpu_to_le32(pad);
196                 crc = crc32(UBIFS_CRC32_INIT, buf + 8, UBIFS_PAD_NODE_SZ - 8);
197                 ch->crc = cpu_to_le32(crc);
198                 memset(buf + UBIFS_PAD_NODE_SZ, 0, pad);
199         } else if (pad > 0)
200                 /* Too little space, padding node won't fit */
201                 memset(buf, UBIFS_PADDING_BYTE, pad);
202 }
203
204 /**
205  * next_sqnum - get next sequence number.
206  * @c: UBIFS file-system description object
207  */
208 static unsigned long long next_sqnum(struct ubifs_info *c)
209 {
210         unsigned long long sqnum;
211
212         spin_lock(&c->cnt_lock);
213         sqnum = ++c->max_sqnum;
214         spin_unlock(&c->cnt_lock);
215
216         if (unlikely(sqnum >= SQNUM_WARN_WATERMARK)) {
217                 if (sqnum >= SQNUM_WATERMARK) {
218                         ubifs_err("sequence number overflow %llu, end of life",
219                                   sqnum);
220                         ubifs_ro_mode(c, -EINVAL);
221                 }
222                 ubifs_warn("running out of sequence numbers, end of life soon");
223         }
224
225         return sqnum;
226 }
227
228 /**
229  * ubifs_prepare_node - prepare node to be written to flash.
230  * @c: UBIFS file-system description object
231  * @node: the node to pad
232  * @len: node length
233  * @pad: if the buffer has to be padded
234  *
235  * This function prepares node at @node to be written to the media - it
236  * calculates node CRC, fills the common header, and adds proper padding up to
237  * the next minimum I/O unit if @pad is not zero.
238  */
239 void ubifs_prepare_node(struct ubifs_info *c, void *node, int len, int pad)
240 {
241         uint32_t crc;
242         struct ubifs_ch *ch = node;
243         unsigned long long sqnum = next_sqnum(c);
244
245         ubifs_assert(len >= UBIFS_CH_SZ);
246
247         ch->magic = cpu_to_le32(UBIFS_NODE_MAGIC);
248         ch->len = cpu_to_le32(len);
249         ch->group_type = UBIFS_NO_NODE_GROUP;
250         ch->sqnum = cpu_to_le64(sqnum);
251         ch->padding[0] = ch->padding[1] = 0;
252         crc = crc32(UBIFS_CRC32_INIT, node + 8, len - 8);
253         ch->crc = cpu_to_le32(crc);
254
255         if (pad) {
256                 len = ALIGN(len, 8);
257                 pad = ALIGN(len, c->min_io_size) - len;
258                 ubifs_pad(c, node + len, pad);
259         }
260 }
261
262 /**
263  * ubifs_prep_grp_node - prepare node of a group to be written to flash.
264  * @c: UBIFS file-system description object
265  * @node: the node to pad
266  * @len: node length
267  * @last: indicates the last node of the group
268  *
269  * This function prepares node at @node to be written to the media - it
270  * calculates node CRC and fills the common header.
271  */
272 void ubifs_prep_grp_node(struct ubifs_info *c, void *node, int len, int last)
273 {
274         uint32_t crc;
275         struct ubifs_ch *ch = node;
276         unsigned long long sqnum = next_sqnum(c);
277
278         ubifs_assert(len >= UBIFS_CH_SZ);
279
280         ch->magic = cpu_to_le32(UBIFS_NODE_MAGIC);
281         ch->len = cpu_to_le32(len);
282         if (last)
283                 ch->group_type = UBIFS_LAST_OF_NODE_GROUP;
284         else
285                 ch->group_type = UBIFS_IN_NODE_GROUP;
286         ch->sqnum = cpu_to_le64(sqnum);
287         ch->padding[0] = ch->padding[1] = 0;
288         crc = crc32(UBIFS_CRC32_INIT, node + 8, len - 8);
289         ch->crc = cpu_to_le32(crc);
290 }
291
292 /**
293  * wbuf_timer_callback - write-buffer timer callback function.
294  * @data: timer data (write-buffer descriptor)
295  *
296  * This function is called when the write-buffer timer expires.
297  */
298 static enum hrtimer_restart wbuf_timer_callback_nolock(struct hrtimer *timer)
299 {
300         struct ubifs_wbuf *wbuf = container_of(timer, struct ubifs_wbuf, timer);
301
302         dbg_io("jhead %s", dbg_jhead(wbuf->jhead));
303         wbuf->need_sync = 1;
304         wbuf->c->need_wbuf_sync = 1;
305         ubifs_wake_up_bgt(wbuf->c);
306         return HRTIMER_NORESTART;
307 }
308
309 /**
310  * new_wbuf_timer - start new write-buffer timer.
311  * @wbuf: write-buffer descriptor
312  */
313 static void new_wbuf_timer_nolock(struct ubifs_wbuf *wbuf)
314 {
315         ubifs_assert(!hrtimer_active(&wbuf->timer));
316
317         if (wbuf->no_timer)
318                 return;
319         dbg_io("set timer for jhead %s, %llu-%llu millisecs",
320                dbg_jhead(wbuf->jhead),
321                div_u64(ktime_to_ns(wbuf->softlimit), USEC_PER_SEC),
322                div_u64(ktime_to_ns(wbuf->softlimit) + wbuf->delta,
323                        USEC_PER_SEC));
324         hrtimer_start_range_ns(&wbuf->timer, wbuf->softlimit, wbuf->delta,
325                                HRTIMER_MODE_REL);
326 }
327
328 /**
329  * cancel_wbuf_timer - cancel write-buffer timer.
330  * @wbuf: write-buffer descriptor
331  */
332 static void cancel_wbuf_timer_nolock(struct ubifs_wbuf *wbuf)
333 {
334         if (wbuf->no_timer)
335                 return;
336         wbuf->need_sync = 0;
337         hrtimer_cancel(&wbuf->timer);
338 }
339
340 /**
341  * ubifs_wbuf_sync_nolock - synchronize write-buffer.
342  * @wbuf: write-buffer to synchronize
343  *
344  * This function synchronizes write-buffer @buf and returns zero in case of
345  * success or a negative error code in case of failure.
346  */
347 int ubifs_wbuf_sync_nolock(struct ubifs_wbuf *wbuf)
348 {
349         struct ubifs_info *c = wbuf->c;
350         int err, dirt;
351
352         cancel_wbuf_timer_nolock(wbuf);
353         if (!wbuf->used || wbuf->lnum == -1)
354                 /* Write-buffer is empty or not seeked */
355                 return 0;
356
357         dbg_io("LEB %d:%d, %d bytes, jhead %s",
358                wbuf->lnum, wbuf->offs, wbuf->used, dbg_jhead(wbuf->jhead));
359         ubifs_assert(!(wbuf->avail & 7));
360         ubifs_assert(wbuf->offs + c->min_io_size <= c->leb_size);
361         ubifs_assert(!c->ro_media && !c->ro_mount);
362
363         if (c->ro_error)
364                 return -EROFS;
365
366         ubifs_pad(c, wbuf->buf + wbuf->used, wbuf->avail);
367         err = ubi_leb_write(c->ubi, wbuf->lnum, wbuf->buf, wbuf->offs,
368                             c->min_io_size, wbuf->dtype);
369         if (err) {
370                 ubifs_err("cannot write %d bytes to LEB %d:%d",
371                           c->min_io_size, wbuf->lnum, wbuf->offs);
372                 dbg_dump_stack();
373                 return err;
374         }
375
376         dirt = wbuf->avail;
377
378         spin_lock(&wbuf->lock);
379         wbuf->offs += c->min_io_size;
380         wbuf->avail = c->min_io_size;
381         wbuf->used = 0;
382         wbuf->next_ino = 0;
383         spin_unlock(&wbuf->lock);
384
385         if (wbuf->sync_callback)
386                 err = wbuf->sync_callback(c, wbuf->lnum,
387                                           c->leb_size - wbuf->offs, dirt);
388         return err;
389 }
390
391 /**
392  * ubifs_wbuf_seek_nolock - seek write-buffer.
393  * @wbuf: write-buffer
394  * @lnum: logical eraseblock number to seek to
395  * @offs: logical eraseblock offset to seek to
396  * @dtype: data type
397  *
398  * This function targets the write-buffer to logical eraseblock @lnum:@offs.
399  * The write-buffer is synchronized if it is not empty. Returns zero in case of
400  * success and a negative error code in case of failure.
401  */
402 int ubifs_wbuf_seek_nolock(struct ubifs_wbuf *wbuf, int lnum, int offs,
403                            int dtype)
404 {
405         const struct ubifs_info *c = wbuf->c;
406
407         dbg_io("LEB %d:%d, jhead %s", lnum, offs, dbg_jhead(wbuf->jhead));
408         ubifs_assert(lnum >= 0 && lnum < c->leb_cnt);
409         ubifs_assert(offs >= 0 && offs <= c->leb_size);
410         ubifs_assert(offs % c->min_io_size == 0 && !(offs & 7));
411         ubifs_assert(lnum != wbuf->lnum);
412
413         if (wbuf->used > 0) {
414                 int err = ubifs_wbuf_sync_nolock(wbuf);
415
416                 if (err)
417                         return err;
418         }
419
420         spin_lock(&wbuf->lock);
421         wbuf->lnum = lnum;
422         wbuf->offs = offs;
423         wbuf->avail = c->min_io_size;
424         wbuf->used = 0;
425         spin_unlock(&wbuf->lock);
426         wbuf->dtype = dtype;
427
428         return 0;
429 }
430
431 /**
432  * ubifs_bg_wbufs_sync - synchronize write-buffers.
433  * @c: UBIFS file-system description object
434  *
435  * This function is called by background thread to synchronize write-buffers.
436  * Returns zero in case of success and a negative error code in case of
437  * failure.
438  */
439 int ubifs_bg_wbufs_sync(struct ubifs_info *c)
440 {
441         int err, i;
442
443         ubifs_assert(!c->ro_media && !c->ro_mount);
444         if (!c->need_wbuf_sync)
445                 return 0;
446         c->need_wbuf_sync = 0;
447
448         if (c->ro_error) {
449                 err = -EROFS;
450                 goto out_timers;
451         }
452
453         dbg_io("synchronize");
454         for (i = 0; i < c->jhead_cnt; i++) {
455                 struct ubifs_wbuf *wbuf = &c->jheads[i].wbuf;
456
457                 cond_resched();
458
459                 /*
460                  * If the mutex is locked then wbuf is being changed, so
461                  * synchronization is not necessary.
462                  */
463                 if (mutex_is_locked(&wbuf->io_mutex))
464                         continue;
465
466                 mutex_lock_nested(&wbuf->io_mutex, wbuf->jhead);
467                 if (!wbuf->need_sync) {
468                         mutex_unlock(&wbuf->io_mutex);
469                         continue;
470                 }
471
472                 err = ubifs_wbuf_sync_nolock(wbuf);
473                 mutex_unlock(&wbuf->io_mutex);
474                 if (err) {
475                         ubifs_err("cannot sync write-buffer, error %d", err);
476                         ubifs_ro_mode(c, err);
477                         goto out_timers;
478                 }
479         }
480
481         return 0;
482
483 out_timers:
484         /* Cancel all timers to prevent repeated errors */
485         for (i = 0; i < c->jhead_cnt; i++) {
486                 struct ubifs_wbuf *wbuf = &c->jheads[i].wbuf;
487
488                 mutex_lock_nested(&wbuf->io_mutex, wbuf->jhead);
489                 cancel_wbuf_timer_nolock(wbuf);
490                 mutex_unlock(&wbuf->io_mutex);
491         }
492         return err;
493 }
494
495 /**
496  * ubifs_wbuf_write_nolock - write data to flash via write-buffer.
497  * @wbuf: write-buffer
498  * @buf: node to write
499  * @len: node length
500  *
501  * This function writes data to flash via write-buffer @wbuf. This means that
502  * the last piece of the node won't reach the flash media immediately if it
503  * does not take whole minimal I/O unit. Instead, the node will sit in RAM
504  * until the write-buffer is synchronized (e.g., by timer).
505  *
506  * This function returns zero in case of success and a negative error code in
507  * case of failure. If the node cannot be written because there is no more
508  * space in this logical eraseblock, %-ENOSPC is returned.
509  */
510 int ubifs_wbuf_write_nolock(struct ubifs_wbuf *wbuf, void *buf, int len)
511 {
512         struct ubifs_info *c = wbuf->c;
513         int err, written, n, aligned_len = ALIGN(len, 8), offs;
514
515         dbg_io("%d bytes (%s) to jhead %s wbuf at LEB %d:%d", len,
516                dbg_ntype(((struct ubifs_ch *)buf)->node_type),
517                dbg_jhead(wbuf->jhead), wbuf->lnum, wbuf->offs + wbuf->used);
518         ubifs_assert(len > 0 && wbuf->lnum >= 0 && wbuf->lnum < c->leb_cnt);
519         ubifs_assert(wbuf->offs >= 0 && wbuf->offs % c->min_io_size == 0);
520         ubifs_assert(!(wbuf->offs & 7) && wbuf->offs <= c->leb_size);
521         ubifs_assert(wbuf->avail > 0 && wbuf->avail <= c->min_io_size);
522         ubifs_assert(mutex_is_locked(&wbuf->io_mutex));
523         ubifs_assert(!c->ro_media && !c->ro_mount);
524
525         if (c->leb_size - wbuf->offs - wbuf->used < aligned_len) {
526                 err = -ENOSPC;
527                 goto out;
528         }
529
530         cancel_wbuf_timer_nolock(wbuf);
531
532         if (c->ro_error)
533                 return -EROFS;
534
535         if (aligned_len <= wbuf->avail) {
536                 /*
537                  * The node is not very large and fits entirely within
538                  * write-buffer.
539                  */
540                 memcpy(wbuf->buf + wbuf->used, buf, len);
541
542                 if (aligned_len == wbuf->avail) {
543                         dbg_io("flush jhead %s wbuf to LEB %d:%d",
544                                dbg_jhead(wbuf->jhead), wbuf->lnum, wbuf->offs);
545                         err = ubi_leb_write(c->ubi, wbuf->lnum, wbuf->buf,
546                                             wbuf->offs, c->min_io_size,
547                                             wbuf->dtype);
548                         if (err)
549                                 goto out;
550
551                         spin_lock(&wbuf->lock);
552                         wbuf->offs += c->min_io_size;
553                         wbuf->avail = c->min_io_size;
554                         wbuf->used = 0;
555                         wbuf->next_ino = 0;
556                         spin_unlock(&wbuf->lock);
557                 } else {
558                         spin_lock(&wbuf->lock);
559                         wbuf->avail -= aligned_len;
560                         wbuf->used += aligned_len;
561                         spin_unlock(&wbuf->lock);
562                 }
563
564                 goto exit;
565         }
566
567         /*
568          * The node is large enough and does not fit entirely within current
569          * minimal I/O unit. We have to fill and flush write-buffer and switch
570          * to the next min. I/O unit.
571          */
572         dbg_io("flush jhead %s wbuf to LEB %d:%d",
573                dbg_jhead(wbuf->jhead), wbuf->lnum, wbuf->offs);
574         memcpy(wbuf->buf + wbuf->used, buf, wbuf->avail);
575         err = ubi_leb_write(c->ubi, wbuf->lnum, wbuf->buf, wbuf->offs,
576                             c->min_io_size, wbuf->dtype);
577         if (err)
578                 goto out;
579
580         offs = wbuf->offs + c->min_io_size;
581         len -= wbuf->avail;
582         aligned_len -= wbuf->avail;
583         written = wbuf->avail;
584
585         /*
586          * The remaining data may take more whole min. I/O units, so write the
587          * remains multiple to min. I/O unit size directly to the flash media.
588          * We align node length to 8-byte boundary because we anyway flash wbuf
589          * if the remaining space is less than 8 bytes.
590          */
591         n = aligned_len >> c->min_io_shift;
592         if (n) {
593                 n <<= c->min_io_shift;
594                 dbg_io("write %d bytes to LEB %d:%d", n, wbuf->lnum, offs);
595                 err = ubi_leb_write(c->ubi, wbuf->lnum, buf + written, offs, n,
596                                     wbuf->dtype);
597                 if (err)
598                         goto out;
599                 offs += n;
600                 aligned_len -= n;
601                 len -= n;
602                 written += n;
603         }
604
605         spin_lock(&wbuf->lock);
606         if (aligned_len)
607                 /*
608                  * And now we have what's left and what does not take whole
609                  * min. I/O unit, so write it to the write-buffer and we are
610                  * done.
611                  */
612                 memcpy(wbuf->buf, buf + written, len);
613
614         wbuf->offs = offs;
615         wbuf->used = aligned_len;
616         wbuf->avail = c->min_io_size - aligned_len;
617         wbuf->next_ino = 0;
618         spin_unlock(&wbuf->lock);
619
620 exit:
621         if (wbuf->sync_callback) {
622                 int free = c->leb_size - wbuf->offs - wbuf->used;
623
624                 err = wbuf->sync_callback(c, wbuf->lnum, free, 0);
625                 if (err)
626                         goto out;
627         }
628
629         if (wbuf->used)
630                 new_wbuf_timer_nolock(wbuf);
631
632         return 0;
633
634 out:
635         ubifs_err("cannot write %d bytes to LEB %d:%d, error %d",
636                   len, wbuf->lnum, wbuf->offs, err);
637         dbg_dump_node(c, buf);
638         dbg_dump_stack();
639         dbg_dump_leb(c, wbuf->lnum);
640         return err;
641 }
642
643 /**
644  * ubifs_write_node - write node to the media.
645  * @c: UBIFS file-system description object
646  * @buf: the node to write
647  * @len: node length
648  * @lnum: logical eraseblock number
649  * @offs: offset within the logical eraseblock
650  * @dtype: node life-time hint (%UBI_LONGTERM, %UBI_SHORTTERM, %UBI_UNKNOWN)
651  *
652  * This function automatically fills node magic number, assigns sequence
653  * number, and calculates node CRC checksum. The length of the @buf buffer has
654  * to be aligned to the minimal I/O unit size. This function automatically
655  * appends padding node and padding bytes if needed. Returns zero in case of
656  * success and a negative error code in case of failure.
657  */
658 int ubifs_write_node(struct ubifs_info *c, void *buf, int len, int lnum,
659                      int offs, int dtype)
660 {
661         int err, buf_len = ALIGN(len, c->min_io_size);
662
663         dbg_io("LEB %d:%d, %s, length %d (aligned %d)",
664                lnum, offs, dbg_ntype(((struct ubifs_ch *)buf)->node_type), len,
665                buf_len);
666         ubifs_assert(lnum >= 0 && lnum < c->leb_cnt && offs >= 0);
667         ubifs_assert(offs % c->min_io_size == 0 && offs < c->leb_size);
668         ubifs_assert(!c->ro_media && !c->ro_mount);
669
670         if (c->ro_error)
671                 return -EROFS;
672
673         ubifs_prepare_node(c, buf, len, 1);
674         err = ubi_leb_write(c->ubi, lnum, buf, offs, buf_len, dtype);
675         if (err) {
676                 ubifs_err("cannot write %d bytes to LEB %d:%d, error %d",
677                           buf_len, lnum, offs, err);
678                 dbg_dump_node(c, buf);
679                 dbg_dump_stack();
680         }
681
682         return err;
683 }
684
685 /**
686  * ubifs_read_node_wbuf - read node from the media or write-buffer.
687  * @wbuf: wbuf to check for un-written data
688  * @buf: buffer to read to
689  * @type: node type
690  * @len: node length
691  * @lnum: logical eraseblock number
692  * @offs: offset within the logical eraseblock
693  *
694  * This function reads a node of known type and length, checks it and stores
695  * in @buf. If the node partially or fully sits in the write-buffer, this
696  * function takes data from the buffer, otherwise it reads the flash media.
697  * Returns zero in case of success, %-EUCLEAN if CRC mismatched and a negative
698  * error code in case of failure.
699  */
700 int ubifs_read_node_wbuf(struct ubifs_wbuf *wbuf, void *buf, int type, int len,
701                          int lnum, int offs)
702 {
703         const struct ubifs_info *c = wbuf->c;
704         int err, rlen, overlap;
705         struct ubifs_ch *ch = buf;
706
707         dbg_io("LEB %d:%d, %s, length %d, jhead %s", lnum, offs,
708                dbg_ntype(type), len, dbg_jhead(wbuf->jhead));
709         ubifs_assert(wbuf && lnum >= 0 && lnum < c->leb_cnt && offs >= 0);
710         ubifs_assert(!(offs & 7) && offs < c->leb_size);
711         ubifs_assert(type >= 0 && type < UBIFS_NODE_TYPES_CNT);
712
713         spin_lock(&wbuf->lock);
714         overlap = (lnum == wbuf->lnum && offs + len > wbuf->offs);
715         if (!overlap) {
716                 /* We may safely unlock the write-buffer and read the data */
717                 spin_unlock(&wbuf->lock);
718                 return ubifs_read_node(c, buf, type, len, lnum, offs);
719         }
720
721         /* Don't read under wbuf */
722         rlen = wbuf->offs - offs;
723         if (rlen < 0)
724                 rlen = 0;
725
726         /* Copy the rest from the write-buffer */
727         memcpy(buf + rlen, wbuf->buf + offs + rlen - wbuf->offs, len - rlen);
728         spin_unlock(&wbuf->lock);
729
730         if (rlen > 0) {
731                 /* Read everything that goes before write-buffer */
732                 err = ubi_read(c->ubi, lnum, buf, offs, rlen);
733                 if (err && err != -EBADMSG) {
734                         ubifs_err("failed to read node %d from LEB %d:%d, "
735                                   "error %d", type, lnum, offs, err);
736                         dbg_dump_stack();
737                         return err;
738                 }
739         }
740
741         if (type != ch->node_type) {
742                 ubifs_err("bad node type (%d but expected %d)",
743                           ch->node_type, type);
744                 goto out;
745         }
746
747         err = ubifs_check_node(c, buf, lnum, offs, 0, 0);
748         if (err) {
749                 ubifs_err("expected node type %d", type);
750                 return err;
751         }
752
753         rlen = le32_to_cpu(ch->len);
754         if (rlen != len) {
755                 ubifs_err("bad node length %d, expected %d", rlen, len);
756                 goto out;
757         }
758
759         return 0;
760
761 out:
762         ubifs_err("bad node at LEB %d:%d", lnum, offs);
763         dbg_dump_node(c, buf);
764         dbg_dump_stack();
765         return -EINVAL;
766 }
767
768 /**
769  * ubifs_read_node - read node.
770  * @c: UBIFS file-system description object
771  * @buf: buffer to read to
772  * @type: node type
773  * @len: node length (not aligned)
774  * @lnum: logical eraseblock number
775  * @offs: offset within the logical eraseblock
776  *
777  * This function reads a node of known type and and length, checks it and
778  * stores in @buf. Returns zero in case of success, %-EUCLEAN if CRC mismatched
779  * and a negative error code in case of failure.
780  */
781 int ubifs_read_node(const struct ubifs_info *c, void *buf, int type, int len,
782                     int lnum, int offs)
783 {
784         int err, l;
785         struct ubifs_ch *ch = buf;
786
787         dbg_io("LEB %d:%d, %s, length %d", lnum, offs, dbg_ntype(type), len);
788         ubifs_assert(lnum >= 0 && lnum < c->leb_cnt && offs >= 0);
789         ubifs_assert(len >= UBIFS_CH_SZ && offs + len <= c->leb_size);
790         ubifs_assert(!(offs & 7) && offs < c->leb_size);
791         ubifs_assert(type >= 0 && type < UBIFS_NODE_TYPES_CNT);
792
793         err = ubi_read(c->ubi, lnum, buf, offs, len);
794         if (err && err != -EBADMSG) {
795                 ubifs_err("cannot read node %d from LEB %d:%d, error %d",
796                           type, lnum, offs, err);
797                 return err;
798         }
799
800         if (type != ch->node_type) {
801                 ubifs_err("bad node type (%d but expected %d)",
802                           ch->node_type, type);
803                 goto out;
804         }
805
806         err = ubifs_check_node(c, buf, lnum, offs, 0, 0);
807         if (err) {
808                 ubifs_err("expected node type %d", type);
809                 return err;
810         }
811
812         l = le32_to_cpu(ch->len);
813         if (l != len) {
814                 ubifs_err("bad node length %d, expected %d", l, len);
815                 goto out;
816         }
817
818         return 0;
819
820 out:
821         ubifs_err("bad node at LEB %d:%d, LEB mapping status %d", lnum, offs,
822                   ubi_is_mapped(c->ubi, lnum));
823         dbg_dump_node(c, buf);
824         dbg_dump_stack();
825         return -EINVAL;
826 }
827
828 /**
829  * ubifs_wbuf_init - initialize write-buffer.
830  * @c: UBIFS file-system description object
831  * @wbuf: write-buffer to initialize
832  *
833  * This function initializes write-buffer. Returns zero in case of success
834  * %-ENOMEM in case of failure.
835  */
836 int ubifs_wbuf_init(struct ubifs_info *c, struct ubifs_wbuf *wbuf)
837 {
838         size_t size;
839
840         wbuf->buf = kmalloc(c->min_io_size, GFP_KERNEL);
841         if (!wbuf->buf)
842                 return -ENOMEM;
843
844         size = (c->min_io_size / UBIFS_CH_SZ + 1) * sizeof(ino_t);
845         wbuf->inodes = kmalloc(size, GFP_KERNEL);
846         if (!wbuf->inodes) {
847                 kfree(wbuf->buf);
848                 wbuf->buf = NULL;
849                 return -ENOMEM;
850         }
851
852         wbuf->used = 0;
853         wbuf->lnum = wbuf->offs = -1;
854         wbuf->avail = c->min_io_size;
855         wbuf->dtype = UBI_UNKNOWN;
856         wbuf->sync_callback = NULL;
857         mutex_init(&wbuf->io_mutex);
858         spin_lock_init(&wbuf->lock);
859         wbuf->c = c;
860         wbuf->next_ino = 0;
861
862         hrtimer_init(&wbuf->timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
863         wbuf->timer.function = wbuf_timer_callback_nolock;
864         wbuf->softlimit = ktime_set(WBUF_TIMEOUT_SOFTLIMIT, 0);
865         wbuf->delta = WBUF_TIMEOUT_HARDLIMIT - WBUF_TIMEOUT_SOFTLIMIT;
866         wbuf->delta *= 1000000000ULL;
867         ubifs_assert(wbuf->delta <= ULONG_MAX);
868         return 0;
869 }
870
871 /**
872  * ubifs_wbuf_add_ino_nolock - add an inode number into the wbuf inode array.
873  * @wbuf: the write-buffer where to add
874  * @inum: the inode number
875  *
876  * This function adds an inode number to the inode array of the write-buffer.
877  */
878 void ubifs_wbuf_add_ino_nolock(struct ubifs_wbuf *wbuf, ino_t inum)
879 {
880         if (!wbuf->buf)
881                 /* NOR flash or something similar */
882                 return;
883
884         spin_lock(&wbuf->lock);
885         if (wbuf->used)
886                 wbuf->inodes[wbuf->next_ino++] = inum;
887         spin_unlock(&wbuf->lock);
888 }
889
890 /**
891  * wbuf_has_ino - returns if the wbuf contains data from the inode.
892  * @wbuf: the write-buffer
893  * @inum: the inode number
894  *
895  * This function returns with %1 if the write-buffer contains some data from the
896  * given inode otherwise it returns with %0.
897  */
898 static int wbuf_has_ino(struct ubifs_wbuf *wbuf, ino_t inum)
899 {
900         int i, ret = 0;
901
902         spin_lock(&wbuf->lock);
903         for (i = 0; i < wbuf->next_ino; i++)
904                 if (inum == wbuf->inodes[i]) {
905                         ret = 1;
906                         break;
907                 }
908         spin_unlock(&wbuf->lock);
909
910         return ret;
911 }
912
913 /**
914  * ubifs_sync_wbufs_by_inode - synchronize write-buffers for an inode.
915  * @c: UBIFS file-system description object
916  * @inode: inode to synchronize
917  *
918  * This function synchronizes write-buffers which contain nodes belonging to
919  * @inode. Returns zero in case of success and a negative error code in case of
920  * failure.
921  */
922 int ubifs_sync_wbufs_by_inode(struct ubifs_info *c, struct inode *inode)
923 {
924         int i, err = 0;
925
926         for (i = 0; i < c->jhead_cnt; i++) {
927                 struct ubifs_wbuf *wbuf = &c->jheads[i].wbuf;
928
929                 if (i == GCHD)
930                         /*
931                          * GC head is special, do not look at it. Even if the
932                          * head contains something related to this inode, it is
933                          * a _copy_ of corresponding on-flash node which sits
934                          * somewhere else.
935                          */
936                         continue;
937
938                 if (!wbuf_has_ino(wbuf, inode->i_ino))
939                         continue;
940
941                 mutex_lock_nested(&wbuf->io_mutex, wbuf->jhead);
942                 if (wbuf_has_ino(wbuf, inode->i_ino))
943                         err = ubifs_wbuf_sync_nolock(wbuf);
944                 mutex_unlock(&wbuf->io_mutex);
945
946                 if (err) {
947                         ubifs_ro_mode(c, err);
948                         return err;
949                 }
950         }
951         return 0;
952 }