]> bbs.cooldavid.org Git - net-next-2.6.git/blob - drivers/net/wireless/rt2x00/rt2x00usb.c
[RT2x00]: add driver for Ralink wireless hardware
[net-next-2.6.git] / drivers / net / wireless / rt2x00 / rt2x00usb.c
1 /*
2         Copyright (C) 2004 - 2007 rt2x00 SourceForge Project
3         <http://rt2x00.serialmonkey.com>
4
5         This program is free software; you can redistribute it and/or modify
6         it under the terms of the GNU General Public License as published by
7         the Free Software Foundation; either version 2 of the License, or
8         (at your option) any later version.
9
10         This program is distributed in the hope that it will be useful,
11         but WITHOUT ANY WARRANTY; without even the implied warranty of
12         MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13         GNU General Public License for more details.
14
15         You should have received a copy of the GNU General Public License
16         along with this program; if not, write to the
17         Free Software Foundation, Inc.,
18         59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
19  */
20
21 /*
22         Module: rt2x00usb
23         Abstract: rt2x00 generic usb device routines.
24  */
25
26 /*
27  * Set enviroment defines for rt2x00.h
28  */
29 #define DRV_NAME "rt2x00usb"
30
31 #include <linux/kernel.h>
32 #include <linux/module.h>
33 #include <linux/usb.h>
34
35 #include "rt2x00.h"
36 #include "rt2x00usb.h"
37
38 /*
39  * Interfacing with the HW.
40  */
41 int rt2x00usb_vendor_request(const struct rt2x00_dev *rt2x00dev,
42                              const u8 request, const u8 requesttype,
43                              const u16 offset, const u16 value,
44                              void *buffer, const u16 buffer_length,
45                              u16 timeout)
46 {
47         struct usb_device *usb_dev =
48             interface_to_usbdev(rt2x00dev_usb(rt2x00dev));
49         int status;
50         unsigned int i;
51         unsigned int pipe =
52             (requesttype == USB_VENDOR_REQUEST_IN) ?
53             usb_rcvctrlpipe(usb_dev, 0) : usb_sndctrlpipe(usb_dev, 0);
54
55         for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
56                 status = usb_control_msg(usb_dev, pipe, request, requesttype,
57                                          value, offset, buffer, buffer_length,
58                                          timeout);
59                 if (status >= 0)
60                         return 0;
61
62                 /*
63                  * Check for errors,
64                  * -ETIMEDOUT: We need a bit more time to complete.
65                  * -ENODEV: Device has disappeared, no point continuing.
66                  */
67                 if (status == -ETIMEDOUT)
68                         timeout *= 2;
69                 else if (status == -ENODEV)
70                         break;
71         }
72
73         ERROR(rt2x00dev,
74               "Vendor Request 0x%02x failed for offset 0x%04x with error %d.\n",
75               request, offset, status);
76
77         return status;
78 }
79 EXPORT_SYMBOL_GPL(rt2x00usb_vendor_request);
80
81 int rt2x00usb_vendor_request_buff(const struct rt2x00_dev *rt2x00dev,
82                                   const u8 request, const u8 requesttype,
83                                   const u16 offset, void *buffer,
84                                   const u16 buffer_length, u16 timeout)
85 {
86         int status;
87
88         /*
89          * Check for Cache availability.
90          */
91         if (unlikely(!rt2x00dev->csr_cache || buffer_length > CSR_CACHE_SIZE)) {
92                 ERROR(rt2x00dev, "CSR cache not available.\n");
93                 return -ENOMEM;
94         }
95
96         if (requesttype == USB_VENDOR_REQUEST_OUT)
97                 memcpy(rt2x00dev->csr_cache, buffer, buffer_length);
98
99         status = rt2x00usb_vendor_request(rt2x00dev, request, requesttype,
100                                           offset, 0, rt2x00dev->csr_cache,
101                                           buffer_length, timeout);
102
103         if (!status && requesttype == USB_VENDOR_REQUEST_IN)
104                 memcpy(buffer, rt2x00dev->csr_cache, buffer_length);
105
106         return status;
107 }
108 EXPORT_SYMBOL_GPL(rt2x00usb_vendor_request_buff);
109
110 /*
111  * TX data handlers.
112  */
113 static void rt2x00usb_interrupt_txdone(struct urb *urb)
114 {
115         struct data_entry *entry = (struct data_entry *)urb->context;
116         struct data_ring *ring = entry->ring;
117         struct rt2x00_dev *rt2x00dev = ring->rt2x00dev;
118         struct data_desc *txd = (struct data_desc *)entry->skb->data;
119         u32 word;
120         int tx_status;
121
122         if (!test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags) ||
123             !__test_and_clear_bit(ENTRY_OWNER_NIC, &entry->flags))
124                 return;
125
126         rt2x00_desc_read(txd, 0, &word);
127
128         /*
129          * Remove the descriptor data from the buffer.
130          */
131         skb_pull(entry->skb, ring->desc_size);
132
133         /*
134          * Obtain the status about this packet.
135          */
136         tx_status = !urb->status ? TX_SUCCESS : TX_FAIL_RETRY;
137
138         rt2x00lib_txdone(entry, tx_status, 0);
139
140         /*
141          * Make this entry available for reuse.
142          */
143         entry->flags = 0;
144         rt2x00_ring_index_done_inc(entry->ring);
145
146         /*
147          * If the data ring was full before the txdone handler
148          * we must make sure the packet queue in the mac80211 stack
149          * is reenabled when the txdone handler has finished.
150          */
151         if (!rt2x00_ring_full(ring))
152                 ieee80211_wake_queue(rt2x00dev->hw,
153                                      entry->tx_status.control.queue);
154 }
155
156 int rt2x00usb_write_tx_data(struct rt2x00_dev *rt2x00dev,
157                             struct data_ring *ring, struct sk_buff *skb,
158                             struct ieee80211_tx_control *control)
159 {
160         struct usb_device *usb_dev =
161             interface_to_usbdev(rt2x00dev_usb(rt2x00dev));
162         struct ieee80211_hdr *ieee80211hdr = (struct ieee80211_hdr *)skb->data;
163         struct data_entry *entry = rt2x00_get_data_entry(ring);
164         u32 length = skb->len;
165
166         if (rt2x00_ring_full(ring)) {
167                 ieee80211_stop_queue(rt2x00dev->hw, control->queue);
168                 return -EINVAL;
169         }
170
171         if (test_bit(ENTRY_OWNER_NIC, &entry->flags)) {
172                 ERROR(rt2x00dev,
173                       "Arrived at non-free entry in the non-full queue %d.\n"
174                       "Please file bug report to %s.\n",
175                       control->queue, DRV_PROJECT);
176                 ieee80211_stop_queue(rt2x00dev->hw, control->queue);
177                 return -EINVAL;
178         }
179
180         /*
181          * Add the descriptor in front of the skb.
182          */
183         skb_push(skb, rt2x00dev->hw->extra_tx_headroom);
184         memset(skb->data, 0x00, rt2x00dev->hw->extra_tx_headroom);
185
186         rt2x00lib_write_tx_desc(rt2x00dev, (struct data_desc *)skb->data,
187                                 ieee80211hdr, length, control);
188         memcpy(&entry->tx_status.control, control, sizeof(*control));
189         entry->skb = skb;
190
191         /*
192          * Length passed to usb_fill_urb cannot be an odd number,
193          * so add 1 byte to make it even.
194          */
195         length += rt2x00dev->hw->extra_tx_headroom;
196         if (length % 2)
197                 length++;
198
199         __set_bit(ENTRY_OWNER_NIC, &entry->flags);
200         usb_fill_bulk_urb(entry->priv, usb_dev,
201                           usb_sndbulkpipe(usb_dev, 1),
202                           skb->data, length, rt2x00usb_interrupt_txdone, entry);
203         usb_submit_urb(entry->priv, GFP_ATOMIC);
204
205         rt2x00_ring_index_inc(ring);
206
207         if (rt2x00_ring_full(ring))
208                 ieee80211_stop_queue(rt2x00dev->hw, control->queue);
209
210         return 0;
211 }
212 EXPORT_SYMBOL_GPL(rt2x00usb_write_tx_data);
213
214 /*
215  * RX data handlers.
216  */
217 static void rt2x00usb_interrupt_rxdone(struct urb *urb)
218 {
219         struct data_entry *entry = (struct data_entry *)urb->context;
220         struct data_ring *ring = entry->ring;
221         struct rt2x00_dev *rt2x00dev = ring->rt2x00dev;
222         struct sk_buff *skb;
223         int retval;
224         int signal;
225         int rssi;
226         int ofdm;
227         int size;
228         int frame_size;
229
230         if (!test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags) ||
231             !test_and_clear_bit(ENTRY_OWNER_NIC, &entry->flags))
232                 return;
233
234         /*
235          * Check if the received data is simply too small
236          * to be actually valid, or if the urb is signaling
237          * a problem.
238          */
239         if (urb->actual_length < entry->ring->desc_size || urb->status)
240                 goto skip_entry;
241
242         retval = rt2x00dev->ops->lib->fill_rxdone(entry, &signal, &rssi,
243                                                   &ofdm, &size);
244         if (retval)
245                 goto skip_entry;
246
247         /*
248          * Allocate a new sk buffer to replace the current one.
249          * If allocation fails, we should drop the current frame
250          * so we can recycle the existing sk buffer for the new frame.
251          */
252         frame_size = entry->ring->data_size + entry->ring->desc_size;
253         skb = dev_alloc_skb(frame_size + NET_IP_ALIGN);
254         if (!skb)
255                 goto skip_entry;
256
257         skb_reserve(skb, NET_IP_ALIGN);
258         skb_put(skb, frame_size);
259
260         /*
261          * Trim the skb_buffer to only contain the valid
262          * frame data (so ignore the device's descriptor).
263          */
264         skb_trim(entry->skb, size);
265
266         /*
267          * Send the frame to rt2x00lib for further processing.
268          */
269         rt2x00lib_rxdone(entry, entry->skb, signal, rssi, ofdm);
270
271         /*
272          * Replace current entry's skb with the newly allocated one,
273          * and reinitialize the urb.
274          */
275         entry->skb = skb;
276         urb->transfer_buffer = entry->skb->data;
277         urb->transfer_buffer_length = entry->skb->len;
278
279 skip_entry:
280         if (test_bit(DEVICE_ENABLED_RADIO, &ring->rt2x00dev->flags)) {
281                 __set_bit(ENTRY_OWNER_NIC, &entry->flags);
282                 usb_submit_urb(urb, GFP_ATOMIC);
283         }
284
285         rt2x00_ring_index_inc(ring);
286 }
287
288 /*
289  * Radio handlers
290  */
291 void rt2x00usb_enable_radio(struct rt2x00_dev *rt2x00dev)
292 {
293         struct usb_device *usb_dev =
294             interface_to_usbdev(rt2x00dev_usb(rt2x00dev));
295         struct data_ring *ring;
296         struct data_entry *entry;
297         unsigned int i;
298
299         /*
300          * Initialize the TX rings
301          */
302         txringall_for_each(rt2x00dev, ring) {
303                 for (i = 0; i < ring->stats.limit; i++)
304                         ring->entry[i].flags = 0;
305
306                 rt2x00_ring_index_clear(ring);
307         }
308
309         /*
310          * Initialize and start the RX ring.
311          */
312         rt2x00_ring_index_clear(rt2x00dev->rx);
313
314         for (i = 0; i < rt2x00dev->rx->stats.limit; i++) {
315                 entry = &rt2x00dev->rx->entry[i];
316
317                 usb_fill_bulk_urb(entry->priv, usb_dev,
318                                   usb_rcvbulkpipe(usb_dev, 1),
319                                   entry->skb->data, entry->skb->len,
320                                   rt2x00usb_interrupt_rxdone, entry);
321
322                 __set_bit(ENTRY_OWNER_NIC, &entry->flags);
323                 usb_submit_urb(entry->priv, GFP_ATOMIC);
324         }
325 }
326 EXPORT_SYMBOL_GPL(rt2x00usb_enable_radio);
327
328 void rt2x00usb_disable_radio(struct rt2x00_dev *rt2x00dev)
329 {
330         struct data_ring *ring;
331         unsigned int i;
332
333         rt2x00usb_vendor_request_sw(rt2x00dev, USB_RX_CONTROL, 0x0000, 0x0000,
334                                     REGISTER_TIMEOUT);
335
336         /*
337          * Cancel all rings.
338          */
339         ring_for_each(rt2x00dev, ring) {
340                 for (i = 0; i < ring->stats.limit; i++)
341                         usb_kill_urb(ring->entry[i].priv);
342         }
343 }
344 EXPORT_SYMBOL_GPL(rt2x00usb_disable_radio);
345
346 /*
347  * Device initialization handlers.
348  */
349 static int rt2x00usb_alloc_urb(struct rt2x00_dev *rt2x00dev,
350                                struct data_ring *ring)
351 {
352         unsigned int i;
353
354         /*
355          * Allocate the URB's
356          */
357         for (i = 0; i < ring->stats.limit; i++) {
358                 ring->entry[i].priv = usb_alloc_urb(0, GFP_KERNEL);
359                 if (!ring->entry[i].priv)
360                         return -ENOMEM;
361         }
362
363         return 0;
364 }
365
366 static void rt2x00usb_free_urb(struct rt2x00_dev *rt2x00dev,
367                                struct data_ring *ring)
368 {
369         unsigned int i;
370
371         if (!ring->entry)
372                 return;
373
374         for (i = 0; i < ring->stats.limit; i++) {
375                 usb_kill_urb(ring->entry[i].priv);
376                 usb_free_urb(ring->entry[i].priv);
377                 if (ring->entry[i].skb)
378                         kfree_skb(ring->entry[i].skb);
379         }
380 }
381
382 int rt2x00usb_initialize(struct rt2x00_dev *rt2x00dev)
383 {
384         struct data_ring *ring;
385         struct sk_buff *skb;
386         unsigned int entry_size;
387         unsigned int i;
388         int status;
389
390         /*
391          * Allocate DMA
392          */
393         ring_for_each(rt2x00dev, ring) {
394                 status = rt2x00usb_alloc_urb(rt2x00dev, ring);
395                 if (status)
396                         goto exit;
397         }
398
399         /*
400          * For the RX ring, skb's should be allocated.
401          */
402         entry_size = rt2x00dev->rx->data_size + rt2x00dev->rx->desc_size;
403         for (i = 0; i < rt2x00dev->rx->stats.limit; i++) {
404                 skb = dev_alloc_skb(NET_IP_ALIGN + entry_size);
405                 if (!skb)
406                         goto exit;
407
408                 skb_reserve(skb, NET_IP_ALIGN);
409                 skb_put(skb, entry_size);
410
411                 rt2x00dev->rx->entry[i].skb = skb;
412         }
413
414         return 0;
415
416 exit:
417         rt2x00usb_uninitialize(rt2x00dev);
418
419         return status;
420 }
421 EXPORT_SYMBOL_GPL(rt2x00usb_initialize);
422
423 void rt2x00usb_uninitialize(struct rt2x00_dev *rt2x00dev)
424 {
425         struct data_ring *ring;
426
427         ring_for_each(rt2x00dev, ring)
428                 rt2x00usb_free_urb(rt2x00dev, ring);
429 }
430 EXPORT_SYMBOL_GPL(rt2x00usb_uninitialize);
431
432 /*
433  * USB driver handlers.
434  */
435 static void rt2x00usb_free_reg(struct rt2x00_dev *rt2x00dev)
436 {
437         kfree(rt2x00dev->rf);
438         rt2x00dev->rf = NULL;
439
440         kfree(rt2x00dev->eeprom);
441         rt2x00dev->eeprom = NULL;
442
443         kfree(rt2x00dev->csr_cache);
444         rt2x00dev->csr_cache = NULL;
445 }
446
447 static int rt2x00usb_alloc_reg(struct rt2x00_dev *rt2x00dev)
448 {
449         rt2x00dev->csr_cache = kzalloc(CSR_CACHE_SIZE, GFP_KERNEL);
450         if (!rt2x00dev->csr_cache)
451                 goto exit;
452
453         rt2x00dev->eeprom = kzalloc(rt2x00dev->ops->eeprom_size, GFP_KERNEL);
454         if (!rt2x00dev->eeprom)
455                 goto exit;
456
457         rt2x00dev->rf = kzalloc(rt2x00dev->ops->rf_size, GFP_KERNEL);
458         if (!rt2x00dev->rf)
459                 goto exit;
460
461         return 0;
462
463 exit:
464         ERROR_PROBE("Failed to allocate registers.\n");
465
466         rt2x00usb_free_reg(rt2x00dev);
467
468         return -ENOMEM;
469 }
470
471 int rt2x00usb_probe(struct usb_interface *usb_intf,
472                     const struct usb_device_id *id)
473 {
474         struct usb_device *usb_dev = interface_to_usbdev(usb_intf);
475         struct rt2x00_ops *ops = (struct rt2x00_ops *)id->driver_info;
476         struct ieee80211_hw *hw;
477         struct rt2x00_dev *rt2x00dev;
478         int retval;
479
480         usb_dev = usb_get_dev(usb_dev);
481
482         hw = ieee80211_alloc_hw(sizeof(struct rt2x00_dev), ops->hw);
483         if (!hw) {
484                 ERROR_PROBE("Failed to allocate hardware.\n");
485                 retval = -ENOMEM;
486                 goto exit_put_device;
487         }
488
489         usb_set_intfdata(usb_intf, hw);
490
491         rt2x00dev = hw->priv;
492         rt2x00dev->dev = usb_intf;
493         rt2x00dev->ops = ops;
494         rt2x00dev->hw = hw;
495
496         retval = rt2x00usb_alloc_reg(rt2x00dev);
497         if (retval)
498                 goto exit_free_device;
499
500         retval = rt2x00lib_probe_dev(rt2x00dev);
501         if (retval)
502                 goto exit_free_reg;
503
504         return 0;
505
506 exit_free_reg:
507         rt2x00usb_free_reg(rt2x00dev);
508
509 exit_free_device:
510         ieee80211_free_hw(hw);
511
512 exit_put_device:
513         usb_put_dev(usb_dev);
514
515         usb_set_intfdata(usb_intf, NULL);
516
517         return retval;
518 }
519 EXPORT_SYMBOL_GPL(rt2x00usb_probe);
520
521 void rt2x00usb_disconnect(struct usb_interface *usb_intf)
522 {
523         struct ieee80211_hw *hw = usb_get_intfdata(usb_intf);
524         struct rt2x00_dev *rt2x00dev = hw->priv;
525
526         /*
527          * Free all allocated data.
528          */
529         rt2x00lib_remove_dev(rt2x00dev);
530         rt2x00usb_free_reg(rt2x00dev);
531         ieee80211_free_hw(hw);
532
533         /*
534          * Free the USB device data.
535          */
536         usb_set_intfdata(usb_intf, NULL);
537         usb_put_dev(interface_to_usbdev(usb_intf));
538 }
539 EXPORT_SYMBOL_GPL(rt2x00usb_disconnect);
540
541 #ifdef CONFIG_PM
542 int rt2x00usb_suspend(struct usb_interface *usb_intf, pm_message_t state)
543 {
544         struct ieee80211_hw *hw = usb_get_intfdata(usb_intf);
545         struct rt2x00_dev *rt2x00dev = hw->priv;
546         int retval;
547
548         retval = rt2x00lib_suspend(rt2x00dev, state);
549         if (retval)
550                 return retval;
551
552         rt2x00usb_free_reg(rt2x00dev);
553
554         /*
555          * Decrease usbdev refcount.
556          */
557         usb_put_dev(interface_to_usbdev(usb_intf));
558
559         return 0;
560 }
561 EXPORT_SYMBOL_GPL(rt2x00usb_suspend);
562
563 int rt2x00usb_resume(struct usb_interface *usb_intf)
564 {
565         struct ieee80211_hw *hw = usb_get_intfdata(usb_intf);
566         struct rt2x00_dev *rt2x00dev = hw->priv;
567         int retval;
568
569         usb_get_dev(interface_to_usbdev(usb_intf));
570
571         retval = rt2x00usb_alloc_reg(rt2x00dev);
572         if (retval)
573                 return retval;
574
575         retval = rt2x00lib_resume(rt2x00dev);
576         if (retval)
577                 goto exit_free_reg;
578
579         return 0;
580
581 exit_free_reg:
582         rt2x00usb_free_reg(rt2x00dev);
583
584         return retval;
585 }
586 EXPORT_SYMBOL_GPL(rt2x00usb_resume);
587 #endif /* CONFIG_PM */
588
589 /*
590  * rt2x00pci module information.
591  */
592 MODULE_AUTHOR(DRV_PROJECT);
593 MODULE_VERSION(DRV_VERSION);
594 MODULE_DESCRIPTION("rt2x00 library");
595 MODULE_LICENSE("GPL");