]> bbs.cooldavid.org Git - net-next-2.6.git/blob - drivers/mfd/stmpe.h
xps: Transmit Packet Steering
[net-next-2.6.git] / drivers / mfd / stmpe.h
1 /*
2  * Copyright (C) ST-Ericsson SA 2010
3  *
4  * License Terms: GNU General Public License, version 2
5  * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
6  */
7
8 #ifndef __STMPE_H
9 #define __STMPE_H
10
11 #ifdef STMPE_DUMP_BYTES
12 static inline void stmpe_dump_bytes(const char *str, const void *buf,
13                                     size_t len)
14 {
15         print_hex_dump_bytes(str, DUMP_PREFIX_OFFSET, buf, len);
16 }
17 #else
18 static inline void stmpe_dump_bytes(const char *str, const void *buf,
19                                     size_t len)
20 {
21 }
22 #endif
23
24 /**
25  * struct stmpe_variant_block - information about block
26  * @cell:       base mfd cell
27  * @irq:        interrupt number to be added to each IORESOURCE_IRQ
28  *              in the cell
29  * @block:      block id; used for identification with platform data and for
30  *              enable and altfunc callbacks
31  */
32 struct stmpe_variant_block {
33         struct mfd_cell         *cell;
34         int                     irq;
35         enum stmpe_block        block;
36 };
37
38 /**
39  * struct stmpe_variant_info - variant-specific information
40  * @name:       part name
41  * @id_val:     content of CHIPID register
42  * @id_mask:    bits valid in CHIPID register for comparison with id_val
43  * @num_gpios:  number of GPIOS
44  * @af_bits:    number of bits used to specify the alternate function
45  * @blocks:     list of blocks present on this device
46  * @num_blocks: number of blocks present on this device
47  * @num_irqs:   number of internal IRQs available on this device
48  * @enable:     callback to enable the specified blocks.
49  *              Called with the I/O lock held.
50  * @get_altfunc: callback to get the alternate function number for the
51  *               specific block
52  * @enable_autosleep: callback to configure autosleep with specified timeout
53  */
54 struct stmpe_variant_info {
55         const char *name;
56         u16 id_val;
57         u16 id_mask;
58         int num_gpios;
59         int af_bits;
60         const u8 *regs;
61         struct stmpe_variant_block *blocks;
62         int num_blocks;
63         int num_irqs;
64         int (*enable)(struct stmpe *stmpe, unsigned int blocks, bool enable);
65         int (*get_altfunc)(struct stmpe *stmpe, enum stmpe_block block);
66         int (*enable_autosleep)(struct stmpe *stmpe, int autosleep_timeout);
67 };
68
69 #define STMPE_ICR_LSB_HIGH      (1 << 2)
70 #define STMPE_ICR_LSB_EDGE      (1 << 1)
71 #define STMPE_ICR_LSB_GIM       (1 << 0)
72
73 /*
74  * STMPE811
75  */
76
77 #define STMPE811_IRQ_TOUCH_DET          0
78 #define STMPE811_IRQ_FIFO_TH            1
79 #define STMPE811_IRQ_FIFO_OFLOW         2
80 #define STMPE811_IRQ_FIFO_FULL          3
81 #define STMPE811_IRQ_FIFO_EMPTY         4
82 #define STMPE811_IRQ_TEMP_SENS          5
83 #define STMPE811_IRQ_ADC                6
84 #define STMPE811_IRQ_GPIOC              7
85 #define STMPE811_NR_INTERNAL_IRQS       8
86
87 #define STMPE811_REG_CHIP_ID            0x00
88 #define STMPE811_REG_SYS_CTRL2          0x04
89 #define STMPE811_REG_INT_CTRL           0x09
90 #define STMPE811_REG_INT_EN             0x0A
91 #define STMPE811_REG_INT_STA            0x0B
92 #define STMPE811_REG_GPIO_INT_EN        0x0C
93 #define STMPE811_REG_GPIO_INT_STA       0x0D
94 #define STMPE811_REG_GPIO_SET_PIN       0x10
95 #define STMPE811_REG_GPIO_CLR_PIN       0x11
96 #define STMPE811_REG_GPIO_MP_STA        0x12
97 #define STMPE811_REG_GPIO_DIR           0x13
98 #define STMPE811_REG_GPIO_ED            0x14
99 #define STMPE811_REG_GPIO_RE            0x15
100 #define STMPE811_REG_GPIO_FE            0x16
101 #define STMPE811_REG_GPIO_AF            0x17
102
103 #define STMPE811_SYS_CTRL2_ADC_OFF      (1 << 0)
104 #define STMPE811_SYS_CTRL2_TSC_OFF      (1 << 1)
105 #define STMPE811_SYS_CTRL2_GPIO_OFF     (1 << 2)
106 #define STMPE811_SYS_CTRL2_TS_OFF       (1 << 3)
107
108 /*
109  * STMPE1601
110  */
111
112 #define STMPE1601_IRQ_GPIOC             8
113 #define STMPE1601_IRQ_PWM3              7
114 #define STMPE1601_IRQ_PWM2              6
115 #define STMPE1601_IRQ_PWM1              5
116 #define STMPE1601_IRQ_PWM0              4
117 #define STMPE1601_IRQ_KEYPAD_OVER       2
118 #define STMPE1601_IRQ_KEYPAD            1
119 #define STMPE1601_IRQ_WAKEUP            0
120 #define STMPE1601_NR_INTERNAL_IRQS      9
121
122 #define STMPE1601_REG_SYS_CTRL                  0x02
123 #define STMPE1601_REG_SYS_CTRL2                 0x03
124 #define STMPE1601_REG_ICR_LSB                   0x11
125 #define STMPE1601_REG_IER_LSB                   0x13
126 #define STMPE1601_REG_ISR_MSB                   0x14
127 #define STMPE1601_REG_CHIP_ID                   0x80
128 #define STMPE1601_REG_INT_EN_GPIO_MASK_LSB      0x17
129 #define STMPE1601_REG_INT_STA_GPIO_MSB          0x18
130 #define STMPE1601_REG_GPIO_MP_LSB               0x87
131 #define STMPE1601_REG_GPIO_SET_LSB              0x83
132 #define STMPE1601_REG_GPIO_CLR_LSB              0x85
133 #define STMPE1601_REG_GPIO_SET_DIR_LSB          0x89
134 #define STMPE1601_REG_GPIO_ED_MSB               0x8A
135 #define STMPE1601_REG_GPIO_RE_LSB               0x8D
136 #define STMPE1601_REG_GPIO_FE_LSB               0x8F
137 #define STMPE1601_REG_GPIO_AF_U_MSB             0x92
138
139 #define STMPE1601_SYS_CTRL_ENABLE_GPIO          (1 << 3)
140 #define STMPE1601_SYS_CTRL_ENABLE_KPC           (1 << 1)
141 #define STMPE1601_SYSCON_ENABLE_SPWM            (1 << 0)
142
143 /* The 1601/2403 share the same masks */
144 #define STMPE1601_AUTOSLEEP_TIMEOUT_MASK        (0x7)
145 #define STPME1601_AUTOSLEEP_ENABLE              (1 << 3)
146
147 /*
148  * STMPE24xx
149  */
150
151 #define STMPE24XX_IRQ_GPIOC             8
152 #define STMPE24XX_IRQ_PWM2              7
153 #define STMPE24XX_IRQ_PWM1              6
154 #define STMPE24XX_IRQ_PWM0              5
155 #define STMPE24XX_IRQ_ROT_OVER          4
156 #define STMPE24XX_IRQ_ROT               3
157 #define STMPE24XX_IRQ_KEYPAD_OVER       2
158 #define STMPE24XX_IRQ_KEYPAD            1
159 #define STMPE24XX_IRQ_WAKEUP            0
160 #define STMPE24XX_NR_INTERNAL_IRQS      9
161
162 #define STMPE24XX_REG_SYS_CTRL          0x02
163 #define STMPE24XX_REG_ICR_LSB           0x11
164 #define STMPE24XX_REG_IER_LSB           0x13
165 #define STMPE24XX_REG_ISR_MSB           0x14
166 #define STMPE24XX_REG_CHIP_ID           0x80
167 #define STMPE24XX_REG_IEGPIOR_LSB       0x18
168 #define STMPE24XX_REG_ISGPIOR_MSB       0x19
169 #define STMPE24XX_REG_GPMR_LSB          0xA5
170 #define STMPE24XX_REG_GPSR_LSB          0x85
171 #define STMPE24XX_REG_GPCR_LSB          0x88
172 #define STMPE24XX_REG_GPDR_LSB          0x8B
173 #define STMPE24XX_REG_GPEDR_MSB         0x8C
174 #define STMPE24XX_REG_GPRER_LSB         0x91
175 #define STMPE24XX_REG_GPFER_LSB         0x94
176 #define STMPE24XX_REG_GPAFR_U_MSB       0x9B
177
178 #define STMPE24XX_SYS_CTRL_ENABLE_GPIO          (1 << 3)
179 #define STMPE24XX_SYSCON_ENABLE_PWM             (1 << 2)
180 #define STMPE24XX_SYS_CTRL_ENABLE_KPC           (1 << 1)
181 #define STMPE24XX_SYSCON_ENABLE_ROT             (1 << 0)
182
183 #endif