]> bbs.cooldavid.org Git - net-next-2.6.git/blame - firmware/Makefile
bnx2x: change type of spq_left to atomic
[net-next-2.6.git] / firmware / Makefile
CommitLineData
4d2acfbf
DW
1#
2# kbuild file for firmware/
3#
4
5# Create $(fwabs) from $(CONFIG_EXTRA_FIRMWARE_DIR) -- if it doesn't have a
6# leading /, it's relative to $(srctree).
7fwdir := $(subst ",,$(CONFIG_EXTRA_FIRMWARE_DIR))
8fwabs := $(addprefix $(srctree)/,$(filter-out /%,$(fwdir)))$(filter /%,$(fwdir))
9
10fw-external-y := $(subst ",,$(CONFIG_EXTRA_FIRMWARE))
11
88ecf814
DW
12# There are three cases to care about:
13# 1. Building kernel with CONFIG_FIRMWARE_IN_KERNEL=y -- $(fw-shipped-y) should
14# include the firmware files to include, according to .config
15# 2. 'make modules_install', which will install firmware for modules, and
16# _also_ for the in-kernel drivers when CONFIG_FIRMWARE_IN_KERNEL=n
17# 3. 'make firmware_install', which installs all firmware, unconditionally.
d172e7f5 18
88ecf814
DW
19# For the former two cases we want $(fw-shipped-y) and $(fw-shipped-m) to be
20# accurate. In the latter case it doesn't matter -- it'll use $(fw-shipped-all).
21# But be aware that the config file might not be included at all.
22
949b4254
JS
23ifdef CONFIG_ACENIC_OMIT_TIGON_I
24acenic-objs := acenic/tg2.bin
25fw-shipped- += acenic/tg1.bin
26else
27acenic-objs := acenic/tg1.bin acenic/tg2.bin
28endif
4b6ece97 29fw-shipped-$(CONFIG_3C359) += 3com/3C359.bin
949b4254 30fw-shipped-$(CONFIG_ACENIC) += $(acenic-objs)
cfc3a44c
JSR
31fw-shipped-$(CONFIG_ADAPTEC_STARFIRE) += adaptec/starfire_rx.bin \
32 adaptec/starfire_tx.bin
7f127d5e 33fw-shipped-$(CONFIG_ATARI_DSP56K) += dsp56k/bootstrap.bin
27d202ff 34fw-shipped-$(CONFIG_ATM_AMBASSADOR) += atmsar11.fw
523224a3
DK
35fw-shipped-$(CONFIG_BNX2X) += bnx2x/bnx2x-e1-6.0.34.0.fw \
36 bnx2x/bnx2x-e1h-6.0.34.0.fw
a931d294 37fw-shipped-$(CONFIG_BNX2) += bnx2/bnx2-mips-09-5.0.0.j15.fw \
bec92044
MC
38 bnx2/bnx2-rv2p-09-5.0.0.j10.fw \
39 bnx2/bnx2-rv2p-09ax-5.0.0.j10.fw \
40 bnx2/bnx2-mips-06-5.0.0.j6.fw \
078b0735 41 bnx2/bnx2-rv2p-06-5.0.0.j3.fw
fcaa4066 42fw-shipped-$(CONFIG_CASSINI) += sun/cassini.bin
547d8bb7 43fw-shipped-$(CONFIG_COMPUTONE) += intelliport2.bin
ad58633c
DLR
44fw-shipped-$(CONFIG_CHELSIO_T3) += cxgb3/t3b_psram-1.1.0.bin \
45 cxgb3/t3c_psram-1.1.0.bin \
17acad30 46 cxgb3/t3fw-7.10.0.bin \
2e8c07c3
DLR
47 cxgb3/ael2005_opt_edc.bin \
48 cxgb3/ael2005_twx_edc.bin \
49 cxgb3/ael2020_twx_edc.bin
ece2be79 50fw-shipped-$(CONFIG_DRM_MGA) += matrox/g200_warp.fw matrox/g400_warp.fw
52f97df5 51fw-shipped-$(CONFIG_DRM_R128) += r128/r128_cce.bin
70967ab9
BH
52fw-shipped-$(CONFIG_DRM_RADEON) += radeon/R100_cp.bin radeon/R200_cp.bin \
53 radeon/R300_cp.bin radeon/R420_cp.bin \
54 radeon/RS690_cp.bin radeon/RS600_cp.bin \
55 radeon/R520_cp.bin \
56 radeon/R600_pfp.bin radeon/R600_me.bin \
57 radeon/RV610_pfp.bin radeon/RV610_me.bin \
58 radeon/RV630_pfp.bin radeon/RV630_me.bin \
59 radeon/RV620_pfp.bin radeon/RV620_me.bin \
60 radeon/RV635_pfp.bin radeon/RV635_me.bin \
61 radeon/RV670_pfp.bin radeon/RV670_me.bin \
62 radeon/RS780_pfp.bin radeon/RS780_me.bin \
63 radeon/RV770_pfp.bin radeon/RV770_me.bin \
64 radeon/RV730_pfp.bin radeon/RV730_me.bin \
65 radeon/RV710_pfp.bin radeon/RV710_me.bin
9137f05f 66fw-shipped-$(CONFIG_DVB_AV7110) += av7110/bootcode.bin
0a2a736a 67fw-shipped-$(CONFIG_DVB_TTUSB_BUDGET) += ttusb-budget/dspbootcode.bin
9ac32e1b
JSR
68fw-shipped-$(CONFIG_E100) += e100/d101m_ucode.bin e100/d101s_ucode.bin \
69 e100/d102e_ucode.bin
cd36e9ef 70fw-shipped-$(CONFIG_MYRI_SBUS) += myricom/lanai.bin
bf6fda63
KK
71fw-shipped-$(CONFIG_PCMCIA_PCNET) += cis/LA-PCM.cis cis/PCMLM28.cis \
72 cis/DP83903.cis cis/NE2K.cis \
abe88069
KK
73 cis/tamarack.cis cis/PE-200.cis \
74 cis/PE520.cis
f0a3a153
KK
75fw-shipped-$(CONFIG_PCMCIA_3C589) += cis/3CXEM556.cis
76fw-shipped-$(CONFIG_PCMCIA_3C574) += cis/3CCFEM556.cis
bf6fda63 77fw-shipped-$(CONFIG_SERIAL_8250_CS) += cis/MT5634ZLX.cis cis/RS-COM-2P.cis \
63ca2d74
KK
78 cis/COMpad2.cis cis/COMpad4.cis \
79 cis/SW_555_SER.cis cis/SW_7xx_SER.cis \
80 cis/SW_8xx_SER.cis
75bf758f 81fw-shipped-$(CONFIG_PCMCIA_SMC91C92) += ositech/Xilinx7OD.bin
989bb5f5
JSR
82fw-shipped-$(CONFIG_SCSI_ADVANSYS) += advansys/mcode.bin advansys/38C1600.bin \
83 advansys/3550.bin advansys/38C0800.bin
1bfa11db
JSR
84fw-shipped-$(CONFIG_SCSI_QLOGIC_1280) += qlogic/1040.bin qlogic/1280.bin \
85 qlogic/12160.bin
f894e74d 86fw-shipped-$(CONFIG_SCSI_QLOGICPTI) += qlogic/isp1000.bin
ecd4b48a 87fw-shipped-$(CONFIG_INFINIBAND_QIB) += qlogic/sd7220.fw
0f805b86 88fw-shipped-$(CONFIG_SMCTR) += tr_smctr.bin
76770664 89fw-shipped-$(CONFIG_SND_KORG1212) += korg/k1212.dsp
a292f404
DW
90fw-shipped-$(CONFIG_SND_MAESTRO3) += ess/maestro3_assp_kernel.fw \
91 ess/maestro3_assp_minisrc.fw
d71792ac
JS
92fw-shipped-$(CONFIG_SND_SB16_CSP) += sb16/mulaw_main.csp sb16/alaw_main.csp \
93 sb16/ima_adpcm_init.csp \
94 sb16/ima_adpcm_playback.csp \
95 sb16/ima_adpcm_capture.csp
18ee6dfa
DW
96fw-shipped-$(CONFIG_SND_YMFPCI) += yamaha/ds1_ctrl.fw yamaha/ds1_dsp.fw \
97 yamaha/ds1e_ctrl.fw
7c7cae17 98fw-shipped-$(CONFIG_SND_WAVEFRONT) += yamaha/yss225_registers.bin
06e1f9ff 99fw-shipped-$(CONFIG_TEHUTI) += tehuti/bdx.bin
077f849d
JSR
100fw-shipped-$(CONFIG_TIGON3) += tigon/tg3.bin tigon/tg3_tso.bin \
101 tigon/tg3_tso5.bin
b775a750 102fw-shipped-$(CONFIG_TYPHOON) += 3com/typhoon.bin
c4667746 103fw-shipped-$(CONFIG_USB_DABUSB) += dabusb/firmware.fw dabusb/bitstream.bin
ae93a55b
DW
104fw-shipped-$(CONFIG_USB_EMI26) += emi26/loader.fw emi26/firmware.fw \
105 emi26/bitstream.fw
b8e24bfa
DW
106fw-shipped-$(CONFIG_USB_EMI62) += emi62/loader.fw emi62/bitstream.fw \
107 emi62/spdif.fw emi62/midi.fw
79682499
DW
108fw-shipped-$(CONFIG_USB_KAWETH) += kaweth/new_code.bin kaweth/trigger_code.bin \
109 kaweth/new_code_fix.bin \
110 kaweth/trigger_code_fix.bin
2971c579
DW
111ifdef CONFIG_FIRMWARE_IN_KERNEL
112fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_MPR) += keyspan/mpr.fw
113fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA18X) += keyspan/usa18x.fw
114fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA19) += keyspan/usa19.fw
115fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA19QI) += keyspan/usa19qi.fw
116fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA19QW) += keyspan/usa19qw.fw
117fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA19W) += keyspan/usa19w.fw
118fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA28) += keyspan/usa28.fw
119fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA28XA) += keyspan/usa28xa.fw
120fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA28XB) += keyspan/usa28xb.fw
121fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA28X) += keyspan/usa28x.fw
122fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA49W) += keyspan/usa49w.fw
123fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA49WLC) += keyspan/usa49wlc.fw
124else
d25dc7fd 125fw-shipped- += keyspan/mpr.fw keyspan/usa18x.fw keyspan/usa19.fw \
2971c579
DW
126 keyspan/usa19qi.fw keyspan/usa19qw.fw keyspan/usa19w.fw \
127 keyspan/usa28.fw keyspan/usa28xa.fw keyspan/usa28xb.fw \
128 keyspan/usa28x.fw keyspan/usa49w.fw keyspan/usa49wlc.fw
129endif
7df52316
CA
130fw-shipped-$(CONFIG_USB_SERIAL_TI) += ti_3410.fw ti_5052.fw \
131 mts_cdma.fw mts_gsm.fw mts_edge.fw
5b9ea932
JS
132fw-shipped-$(CONFIG_USB_SERIAL_EDGEPORT) += edgeport/boot.fw edgeport/boot2.fw \
133 edgeport/down.fw edgeport/down2.fw
d12b219a 134fw-shipped-$(CONFIG_USB_SERIAL_EDGEPORT_TI) += edgeport/down3.bin
ec6752f5
DW
135fw-shipped-$(CONFIG_USB_SERIAL_WHITEHEAT) += whiteheat_loader.fw whiteheat.fw \
136 # whiteheat_loader_debug.fw
3edbf98b
DW
137fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_PDA) += keyspan_pda/keyspan_pda.fw
138fw-shipped-$(CONFIG_USB_SERIAL_XIRCOM) += keyspan_pda/xircom_pgs.fw
fb54be87 139fw-shipped-$(CONFIG_USB_VICAM) += vicam/firmware.fw
04a33e40 140fw-shipped-$(CONFIG_VIDEO_CPIA2) += cpia2/stv0672_vp4.bin
a7a5eb9d 141fw-shipped-$(CONFIG_YAM) += yam/1200.bin yam/9600.bin
88ecf814
DW
142
143fw-shipped-all := $(fw-shipped-y) $(fw-shipped-m) $(fw-shipped-)
144
145# Directories which we _might_ need to create, so we have a rule for them.
3c955b40 146firmware-dirs := $(sort $(addprefix $(objtree)/$(obj)/,$(dir $(fw-external-y) $(fw-shipped-all))))
4d2acfbf
DW
147
148quiet_cmd_mkdir = MKDIR $(patsubst $(objtree)/%,%,$@)
149 cmd_mkdir = mkdir -p $@
150
151quiet_cmd_ihex = IHEX $@
152 cmd_ihex = $(OBJCOPY) -Iihex -Obinary $< $@
153
8bd6b222 154quiet_cmd_ihex2fw = IHEX2FW $@
556b0f58 155 cmd_ihex2fw = $(objtree)/$(obj)/ihex2fw $< $@
8bd6b222 156
59890f74 157quiet_cmd_h16tofw = H16TOFW $@
556b0f58 158 cmd_h16tofw = $(objtree)/$(obj)/ihex2fw -w $< $@
59890f74 159
4d2acfbf
DW
160quiet_cmd_fwbin = MK_FW $@
161 cmd_fwbin = FWNAME="$(patsubst firmware/%.gen.S,%,$@)"; \
162 FWSTR="$(subst /,_,$(subst .,_,$(subst -,_,$(patsubst \
163 firmware/%.gen.S,%,$@))))"; \
164 ASM_WORD=$(if $(CONFIG_64BIT),.quad,.long); \
165 ASM_ALIGN=$(if $(CONFIG_64BIT),3,2); \
166 PROGBITS=$(if $(CONFIG_ARM),%,@)progbits; \
167 echo "/* Generated by firmware/Makefile */" > $@;\
168 echo " .section .rodata" >>$@;\
169 echo " .p2align $${ASM_ALIGN}" >>$@;\
170 echo "_fw_$${FWSTR}_bin:" >>$@;\
171 echo " .incbin \"$(2)\"" >>$@;\
172 echo "_fw_end:" >>$@;\
173 echo " .section .rodata.str,\"aMS\",$${PROGBITS},1" >>$@;\
174 echo " .p2align $${ASM_ALIGN}" >>$@;\
175 echo "_fw_$${FWSTR}_name:" >>$@;\
176 echo " .string \"$$FWNAME\"" >>$@;\
177 echo " .section .builtin_fw,\"a\",$${PROGBITS}" >>$@;\
178 echo " .p2align $${ASM_ALIGN}" >>$@;\
179 echo " $${ASM_WORD} _fw_$${FWSTR}_name" >>$@;\
180 echo " $${ASM_WORD} _fw_$${FWSTR}_bin" >>$@;\
181 echo " $${ASM_WORD} _fw_end - _fw_$${FWSTR}_bin" >>$@;
182
183# One of these files will change, or come into existence, whenever
184# the configuration changes between 32-bit and 64-bit. The .S files
185# need to change when that happens.
186wordsize_deps := $(wildcard include/config/64bit.h include/config/32bit.h \
187 include/config/ppc32.h include/config/ppc64.h \
188 include/config/superh32.h include/config/superh64.h \
189 include/config/x86_32.h include/config/x86_64.h)
190
191# Workaround for make < 3.81, where .SECONDEXPANSION doesn't work.
192# It'll end up depending on these targets, so make them a PHONY rule which
193# depends on _all_ the directories in $(firmware-dirs), and it'll work out OK.
194PHONY += $(objtree)/$$(%) $(objtree)/$(obj)/$$(%)
195$(objtree)/$$(%) $(objtree)/$(obj)/$$(%): $(firmware-dirs)
196 @true
197
198# For the $$(dir %) trick, where we need % to be expanded first.
199.SECONDEXPANSION:
200
201$(patsubst %,$(obj)/%.gen.S, $(fw-shipped-y)): %: $(wordsize_deps) \
202 | $(objtree)/$$(dir %)
203 $(call cmd,fwbin,$(patsubst %.gen.S,%,$@))
204$(patsubst %,$(obj)/%.gen.S, $(fw-external-y)): %: $(wordsize_deps) \
50515af2 205 include/config/extra/firmware/dir.h | $(objtree)/$$(dir %)
4d2acfbf
DW
206 $(call cmd,fwbin,$(fwabs)/$(patsubst $(obj)/%.gen.S,%,$@))
207
208# The .o files depend on the binaries directly; the .S files don't.
209$(patsubst %,$(obj)/%.gen.o, $(fw-shipped-y)): %.gen.o: %
210$(patsubst %,$(obj)/%.gen.o, $(fw-external-y)): $(obj)/%.gen.o: $(fwdir)/%
211
8bd6b222
DW
212# .ihex is used just as a simple way to hold binary files in a source tree
213# where binaries are frowned upon. They are directly converted with objcopy.
4d2acfbf
DW
214$(obj)/%: $(obj)/%.ihex | $(objtree)/$(obj)/$$(dir %)
215 $(call cmd,ihex)
216
4528e429
DW
217# Don't depend on ihex2fw if we're installing and it already exists.
218# Putting it after | in the dependencies doesn't seem sufficient when
219# we're installing after a cross-compile, because ihex2fw has dependencies
220# on stuff like /usr/lib/gcc/ppc64-redhat-linux/4.3.0/include/stddef.h and
221# thus wants to be rebuilt. Which it can't be, if the prebuilt kernel tree
222# is exported read-only for someone to run 'make install'.
223ifeq ($(INSTALL):$(wildcard $(obj)/ihex2fw),install:$(obj)/ihex2fw)
224ihex2fw_dep :=
225else
226ihex2fw_dep := $(obj)/ihex2fw
227endif
228
8bd6b222
DW
229# .HEX is also Intel HEX, but where the offset and length in each record
230# is actually meaningful, because the firmware has to be loaded in a certain
231# order rather than as a single binary blob. Thus, we convert them into our
232# more compact binary representation of ihex records (<linux/ihex.h>)
4528e429 233$(obj)/%.fw: $(obj)/%.HEX $(ihex2fw_dep) | $(objtree)/$(obj)/$$(dir %)
8bd6b222
DW
234 $(call cmd,ihex2fw)
235
59890f74 236# .H16 is our own modified form of Intel HEX, with 16-bit length for records.
4528e429 237$(obj)/%.fw: $(obj)/%.H16 $(ihex2fw_dep) | $(objtree)/$(obj)/$$(dir %)
59890f74
DW
238 $(call cmd,h16tofw)
239
4d2acfbf
DW
240$(firmware-dirs):
241 $(call cmd,mkdir)
242
88ecf814
DW
243obj-y += $(patsubst %,%.gen.o, $(fw-external-y))
244obj-$(CONFIG_FIRMWARE_IN_KERNEL) += $(patsubst %,%.gen.o, $(fw-shipped-y))
4d2acfbf
DW
245
246# Remove .S files and binaries created from ihex
247# (during 'make clean' .config isn't included so they're all in $(fw-shipped-))
248targets := $(fw-shipped-) $(patsubst $(obj)/%,%, \
249 $(shell find $(obj) -name \*.gen.S 2>/dev/null))
250
251# Without this, built-in.o won't be created when it's empty, and the
252# final vmlinux link will fail.
253obj-n := dummy
556b0f58
DW
254
255hostprogs-y := ihex2fw