]> bbs.cooldavid.org Git - net-next-2.6.git/blame - firmware/Makefile
cxgb3: AEL2020 phy support update
[net-next-2.6.git] / firmware / Makefile
CommitLineData
4d2acfbf
DW
1#
2# kbuild file for firmware/
3#
4
5# Create $(fwabs) from $(CONFIG_EXTRA_FIRMWARE_DIR) -- if it doesn't have a
6# leading /, it's relative to $(srctree).
7fwdir := $(subst ",,$(CONFIG_EXTRA_FIRMWARE_DIR))
8fwabs := $(addprefix $(srctree)/,$(filter-out /%,$(fwdir)))$(filter /%,$(fwdir))
9
10fw-external-y := $(subst ",,$(CONFIG_EXTRA_FIRMWARE))
11
88ecf814
DW
12# There are three cases to care about:
13# 1. Building kernel with CONFIG_FIRMWARE_IN_KERNEL=y -- $(fw-shipped-y) should
14# include the firmware files to include, according to .config
15# 2. 'make modules_install', which will install firmware for modules, and
16# _also_ for the in-kernel drivers when CONFIG_FIRMWARE_IN_KERNEL=n
17# 3. 'make firmware_install', which installs all firmware, unconditionally.
d172e7f5 18
88ecf814
DW
19# For the former two cases we want $(fw-shipped-y) and $(fw-shipped-m) to be
20# accurate. In the latter case it doesn't matter -- it'll use $(fw-shipped-all).
21# But be aware that the config file might not be included at all.
22
949b4254
JS
23ifdef CONFIG_ACENIC_OMIT_TIGON_I
24acenic-objs := acenic/tg2.bin
25fw-shipped- += acenic/tg1.bin
26else
27acenic-objs := acenic/tg1.bin acenic/tg2.bin
28endif
4b6ece97 29fw-shipped-$(CONFIG_3C359) += 3com/3C359.bin
949b4254 30fw-shipped-$(CONFIG_ACENIC) += $(acenic-objs)
cfc3a44c
JSR
31fw-shipped-$(CONFIG_ADAPTEC_STARFIRE) += adaptec/starfire_rx.bin \
32 adaptec/starfire_tx.bin
7f127d5e 33fw-shipped-$(CONFIG_ATARI_DSP56K) += dsp56k/bootstrap.bin
27d202ff 34fw-shipped-$(CONFIG_ATM_AMBASSADOR) += atmsar11.fw
94a78b79 35fw-shipped-$(CONFIG_BNX2X) += bnx2x-e1-4.8.53.0.fw bnx2x-e1h-4.8.53.0.fw
57579f76
MC
36fw-shipped-$(CONFIG_BNX2) += bnx2/bnx2-mips-09-4.6.17.fw \
37 bnx2/bnx2-rv2p-09-4.6.15.fw \
38 bnx2/bnx2-mips-06-4.6.16.fw \
39 bnx2/bnx2-rv2p-06-4.6.16.fw
fcaa4066 40fw-shipped-$(CONFIG_CASSINI) += sun/cassini.bin
547d8bb7 41fw-shipped-$(CONFIG_COMPUTONE) += intelliport2.bin
ad58633c
DLR
42fw-shipped-$(CONFIG_CHELSIO_T3) += cxgb3/t3b_psram-1.1.0.bin \
43 cxgb3/t3c_psram-1.1.0.bin \
6ba5f9c7 44 cxgb3/t3fw-7.4.0.bin
9137f05f 45fw-shipped-$(CONFIG_DVB_AV7110) += av7110/bootcode.bin
0a2a736a 46fw-shipped-$(CONFIG_DVB_TTUSB_BUDGET) += ttusb-budget/dspbootcode.bin
9ac32e1b
JSR
47fw-shipped-$(CONFIG_E100) += e100/d101m_ucode.bin e100/d101s_ucode.bin \
48 e100/d102e_ucode.bin
cd36e9ef 49fw-shipped-$(CONFIG_MYRI_SBUS) += myricom/lanai.bin
99b28c47 50fw-shipped-$(CONFIG_PCMCIA_PCNET) += cis/LA-PCM.cis
f0a3a153
KK
51fw-shipped-$(CONFIG_PCMCIA_3C589) += cis/3CXEM556.cis
52fw-shipped-$(CONFIG_PCMCIA_3C574) += cis/3CCFEM556.cis
75bf758f 53fw-shipped-$(CONFIG_PCMCIA_SMC91C92) += ositech/Xilinx7OD.bin
989bb5f5
JSR
54fw-shipped-$(CONFIG_SCSI_ADVANSYS) += advansys/mcode.bin advansys/38C1600.bin \
55 advansys/3550.bin advansys/38C0800.bin
1bfa11db
JSR
56fw-shipped-$(CONFIG_SCSI_QLOGIC_1280) += qlogic/1040.bin qlogic/1280.bin \
57 qlogic/12160.bin
f894e74d 58fw-shipped-$(CONFIG_SCSI_QLOGICPTI) += qlogic/isp1000.bin
0f805b86 59fw-shipped-$(CONFIG_SMCTR) += tr_smctr.bin
76770664 60fw-shipped-$(CONFIG_SND_KORG1212) += korg/k1212.dsp
a292f404
DW
61fw-shipped-$(CONFIG_SND_MAESTRO3) += ess/maestro3_assp_kernel.fw \
62 ess/maestro3_assp_minisrc.fw
d71792ac
JS
63fw-shipped-$(CONFIG_SND_SB16_CSP) += sb16/mulaw_main.csp sb16/alaw_main.csp \
64 sb16/ima_adpcm_init.csp \
65 sb16/ima_adpcm_playback.csp \
66 sb16/ima_adpcm_capture.csp
18ee6dfa
DW
67fw-shipped-$(CONFIG_SND_YMFPCI) += yamaha/ds1_ctrl.fw yamaha/ds1_dsp.fw \
68 yamaha/ds1e_ctrl.fw
7c7cae17 69fw-shipped-$(CONFIG_SND_WAVEFRONT) += yamaha/yss225_registers.bin
06e1f9ff 70fw-shipped-$(CONFIG_TEHUTI) += tehuti/bdx.bin
077f849d
JSR
71fw-shipped-$(CONFIG_TIGON3) += tigon/tg3.bin tigon/tg3_tso.bin \
72 tigon/tg3_tso5.bin
b775a750 73fw-shipped-$(CONFIG_TYPHOON) += 3com/typhoon.bin
c4667746 74fw-shipped-$(CONFIG_USB_DABUSB) += dabusb/firmware.fw dabusb/bitstream.bin
ae93a55b
DW
75fw-shipped-$(CONFIG_USB_EMI26) += emi26/loader.fw emi26/firmware.fw \
76 emi26/bitstream.fw
b8e24bfa
DW
77fw-shipped-$(CONFIG_USB_EMI62) += emi62/loader.fw emi62/bitstream.fw \
78 emi62/spdif.fw emi62/midi.fw
79682499
DW
79fw-shipped-$(CONFIG_USB_KAWETH) += kaweth/new_code.bin kaweth/trigger_code.bin \
80 kaweth/new_code_fix.bin \
81 kaweth/trigger_code_fix.bin
2971c579
DW
82ifdef CONFIG_FIRMWARE_IN_KERNEL
83fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_MPR) += keyspan/mpr.fw
84fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA18X) += keyspan/usa18x.fw
85fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA19) += keyspan/usa19.fw
86fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA19QI) += keyspan/usa19qi.fw
87fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA19QW) += keyspan/usa19qw.fw
88fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA19W) += keyspan/usa19w.fw
89fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA28) += keyspan/usa28.fw
90fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA28XA) += keyspan/usa28xa.fw
91fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA28XB) += keyspan/usa28xb.fw
92fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA28X) += keyspan/usa28x.fw
93fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA49W) += keyspan/usa49w.fw
94fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA49WLC) += keyspan/usa49wlc.fw
95else
d25dc7fd 96fw-shipped- += keyspan/mpr.fw keyspan/usa18x.fw keyspan/usa19.fw \
2971c579
DW
97 keyspan/usa19qi.fw keyspan/usa19qw.fw keyspan/usa19w.fw \
98 keyspan/usa28.fw keyspan/usa28xa.fw keyspan/usa28xb.fw \
99 keyspan/usa28x.fw keyspan/usa49w.fw keyspan/usa49wlc.fw
100endif
7df52316
CA
101fw-shipped-$(CONFIG_USB_SERIAL_TI) += ti_3410.fw ti_5052.fw \
102 mts_cdma.fw mts_gsm.fw mts_edge.fw
5b9ea932
JS
103fw-shipped-$(CONFIG_USB_SERIAL_EDGEPORT) += edgeport/boot.fw edgeport/boot2.fw \
104 edgeport/down.fw edgeport/down2.fw
d12b219a 105fw-shipped-$(CONFIG_USB_SERIAL_EDGEPORT_TI) += edgeport/down3.bin
ec6752f5
DW
106fw-shipped-$(CONFIG_USB_SERIAL_WHITEHEAT) += whiteheat_loader.fw whiteheat.fw \
107 # whiteheat_loader_debug.fw
3edbf98b
DW
108fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_PDA) += keyspan_pda/keyspan_pda.fw
109fw-shipped-$(CONFIG_USB_SERIAL_XIRCOM) += keyspan_pda/xircom_pgs.fw
fb54be87 110fw-shipped-$(CONFIG_USB_VICAM) += vicam/firmware.fw
04a33e40 111fw-shipped-$(CONFIG_VIDEO_CPIA2) += cpia2/stv0672_vp4.bin
a7a5eb9d 112fw-shipped-$(CONFIG_YAM) += yam/1200.bin yam/9600.bin
88ecf814
DW
113
114fw-shipped-all := $(fw-shipped-y) $(fw-shipped-m) $(fw-shipped-)
115
116# Directories which we _might_ need to create, so we have a rule for them.
117firmware-dirs := $(sort $(patsubst %,$(objtree)/$(obj)/%/,$(dir $(fw-external-y) $(fw-shipped-all))))
4d2acfbf
DW
118
119quiet_cmd_mkdir = MKDIR $(patsubst $(objtree)/%,%,$@)
120 cmd_mkdir = mkdir -p $@
121
122quiet_cmd_ihex = IHEX $@
123 cmd_ihex = $(OBJCOPY) -Iihex -Obinary $< $@
124
8bd6b222 125quiet_cmd_ihex2fw = IHEX2FW $@
556b0f58 126 cmd_ihex2fw = $(objtree)/$(obj)/ihex2fw $< $@
8bd6b222 127
59890f74 128quiet_cmd_h16tofw = H16TOFW $@
556b0f58 129 cmd_h16tofw = $(objtree)/$(obj)/ihex2fw -w $< $@
59890f74 130
4d2acfbf
DW
131quiet_cmd_fwbin = MK_FW $@
132 cmd_fwbin = FWNAME="$(patsubst firmware/%.gen.S,%,$@)"; \
133 FWSTR="$(subst /,_,$(subst .,_,$(subst -,_,$(patsubst \
134 firmware/%.gen.S,%,$@))))"; \
135 ASM_WORD=$(if $(CONFIG_64BIT),.quad,.long); \
136 ASM_ALIGN=$(if $(CONFIG_64BIT),3,2); \
137 PROGBITS=$(if $(CONFIG_ARM),%,@)progbits; \
138 echo "/* Generated by firmware/Makefile */" > $@;\
139 echo " .section .rodata" >>$@;\
140 echo " .p2align $${ASM_ALIGN}" >>$@;\
141 echo "_fw_$${FWSTR}_bin:" >>$@;\
142 echo " .incbin \"$(2)\"" >>$@;\
143 echo "_fw_end:" >>$@;\
144 echo " .section .rodata.str,\"aMS\",$${PROGBITS},1" >>$@;\
145 echo " .p2align $${ASM_ALIGN}" >>$@;\
146 echo "_fw_$${FWSTR}_name:" >>$@;\
147 echo " .string \"$$FWNAME\"" >>$@;\
148 echo " .section .builtin_fw,\"a\",$${PROGBITS}" >>$@;\
149 echo " .p2align $${ASM_ALIGN}" >>$@;\
150 echo " $${ASM_WORD} _fw_$${FWSTR}_name" >>$@;\
151 echo " $${ASM_WORD} _fw_$${FWSTR}_bin" >>$@;\
152 echo " $${ASM_WORD} _fw_end - _fw_$${FWSTR}_bin" >>$@;
153
154# One of these files will change, or come into existence, whenever
155# the configuration changes between 32-bit and 64-bit. The .S files
156# need to change when that happens.
157wordsize_deps := $(wildcard include/config/64bit.h include/config/32bit.h \
158 include/config/ppc32.h include/config/ppc64.h \
159 include/config/superh32.h include/config/superh64.h \
160 include/config/x86_32.h include/config/x86_64.h)
161
162# Workaround for make < 3.81, where .SECONDEXPANSION doesn't work.
163# It'll end up depending on these targets, so make them a PHONY rule which
164# depends on _all_ the directories in $(firmware-dirs), and it'll work out OK.
165PHONY += $(objtree)/$$(%) $(objtree)/$(obj)/$$(%)
166$(objtree)/$$(%) $(objtree)/$(obj)/$$(%): $(firmware-dirs)
167 @true
168
169# For the $$(dir %) trick, where we need % to be expanded first.
170.SECONDEXPANSION:
171
172$(patsubst %,$(obj)/%.gen.S, $(fw-shipped-y)): %: $(wordsize_deps) \
173 | $(objtree)/$$(dir %)
174 $(call cmd,fwbin,$(patsubst %.gen.S,%,$@))
175$(patsubst %,$(obj)/%.gen.S, $(fw-external-y)): %: $(wordsize_deps) \
50515af2 176 include/config/extra/firmware/dir.h | $(objtree)/$$(dir %)
4d2acfbf
DW
177 $(call cmd,fwbin,$(fwabs)/$(patsubst $(obj)/%.gen.S,%,$@))
178
179# The .o files depend on the binaries directly; the .S files don't.
180$(patsubst %,$(obj)/%.gen.o, $(fw-shipped-y)): %.gen.o: %
181$(patsubst %,$(obj)/%.gen.o, $(fw-external-y)): $(obj)/%.gen.o: $(fwdir)/%
182
8bd6b222
DW
183# .ihex is used just as a simple way to hold binary files in a source tree
184# where binaries are frowned upon. They are directly converted with objcopy.
4d2acfbf
DW
185$(obj)/%: $(obj)/%.ihex | $(objtree)/$(obj)/$$(dir %)
186 $(call cmd,ihex)
187
4528e429
DW
188# Don't depend on ihex2fw if we're installing and it already exists.
189# Putting it after | in the dependencies doesn't seem sufficient when
190# we're installing after a cross-compile, because ihex2fw has dependencies
191# on stuff like /usr/lib/gcc/ppc64-redhat-linux/4.3.0/include/stddef.h and
192# thus wants to be rebuilt. Which it can't be, if the prebuilt kernel tree
193# is exported read-only for someone to run 'make install'.
194ifeq ($(INSTALL):$(wildcard $(obj)/ihex2fw),install:$(obj)/ihex2fw)
195ihex2fw_dep :=
196else
197ihex2fw_dep := $(obj)/ihex2fw
198endif
199
8bd6b222
DW
200# .HEX is also Intel HEX, but where the offset and length in each record
201# is actually meaningful, because the firmware has to be loaded in a certain
202# order rather than as a single binary blob. Thus, we convert them into our
203# more compact binary representation of ihex records (<linux/ihex.h>)
4528e429 204$(obj)/%.fw: $(obj)/%.HEX $(ihex2fw_dep) | $(objtree)/$(obj)/$$(dir %)
8bd6b222
DW
205 $(call cmd,ihex2fw)
206
59890f74 207# .H16 is our own modified form of Intel HEX, with 16-bit length for records.
4528e429 208$(obj)/%.fw: $(obj)/%.H16 $(ihex2fw_dep) | $(objtree)/$(obj)/$$(dir %)
59890f74
DW
209 $(call cmd,h16tofw)
210
4d2acfbf
DW
211$(firmware-dirs):
212 $(call cmd,mkdir)
213
88ecf814
DW
214obj-y += $(patsubst %,%.gen.o, $(fw-external-y))
215obj-$(CONFIG_FIRMWARE_IN_KERNEL) += $(patsubst %,%.gen.o, $(fw-shipped-y))
4d2acfbf
DW
216
217# Remove .S files and binaries created from ihex
218# (during 'make clean' .config isn't included so they're all in $(fw-shipped-))
219targets := $(fw-shipped-) $(patsubst $(obj)/%,%, \
220 $(shell find $(obj) -name \*.gen.S 2>/dev/null))
221
222# Without this, built-in.o won't be created when it's empty, and the
223# final vmlinux link will fail.
224obj-n := dummy
556b0f58
DW
225
226hostprogs-y := ihex2fw