omap: Separate out omap2 FS USB platform init functions

We want to split old FS USB platform init code and stop doing pin multiplexing
under plat-omap. First move 24xx specific init code into omap2_usb[012]_init
functions.

Cc: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Tony Lindgren <tony@atomide.com>

diff --git a/arch/arm/plat-omap/usb.c b/arch/arm/plat-omap/usb.c
index d3bf17cd36f37f997c1c3dbe879905f70bdf5289..9c4929a33e525bb32807bbc87b865bf824cf28db 100644 (file)
--- a/arch/arm/plat-omap/usb.c
+++ b/arch/arm/plat-omap/usb.c
@@ -115,15 +115,56 @@ static void omap2_usb2_enable_5pinunitll(void)
        omap_ctrl_writel(r, OMAP2_CONTROL_DEVCONF0);
 }
 
+static u32 __init omap2_usb0_init(unsigned nwires, unsigned is_device)
+{
+       u32     syscon1 = 0;
+
+       omap2_usb_devconf_clear(0, USB_BIDIR_TLL);
+
+       if (nwires == 0)
+               return 0;
+
+       if (is_device)
+               omap_cfg_reg(J20_24XX_USB0_PUEN);
+
+       omap_cfg_reg(K18_24XX_USB0_DAT);
+       omap_cfg_reg(K19_24XX_USB0_TXEN);
+       omap_cfg_reg(J14_24XX_USB0_SE0);
+       if (nwires != 3)
+               omap_cfg_reg(J18_24XX_USB0_RCV);
+
+       switch (nwires) {
+       case 3:
+               syscon1 = 2;
+               omap2_usb_devconf_set(0, USB_BIDIR);
+               break;
+       case 4:
+               syscon1 = 1;
+               omap2_usb_devconf_set(0, USB_BIDIR);
+               break;
+       case 6:
+               syscon1 = 3;
+               omap_cfg_reg(J19_24XX_USB0_VP);
+               omap_cfg_reg(K20_24XX_USB0_VM);
+               omap2_usb_devconf_set(0, USB_UNIDIR);
+               break;
+       default:
+               printk(KERN_ERR "illegal usb%d %d-wire transceiver\n",
+                       0, nwires);
+       }
+
+       return syscon1 << 16;
+}
+
 static u32 __init omap_usb0_init(unsigned nwires, unsigned is_device)
 {
        u32     syscon1 = 0;
 
        if (cpu_is_omap24xx())
-               omap2_usb_devconf_clear(0, USB_BIDIR_TLL);
+               return omap2_usb0_init(nwires, is_device);
 
        if (nwires == 0) {
-               if (cpu_class_is_omap1() && !cpu_is_omap15xx()) {
+               if (!cpu_is_omap15xx()) {
                        u32 l;
 
                        /* pulldown D+/D- */
@@ -135,9 +176,7 @@ static u32 __init omap_usb0_init(unsigned nwires, unsigned is_device)
        }
 
        if (is_device) {
-               if (cpu_is_omap24xx())
-                       omap_cfg_reg(J20_24XX_USB0_PUEN);
-               else if (cpu_is_omap7xx()) {
+               if (cpu_is_omap7xx()) {
                        omap_cfg_reg(AA17_7XX_USB_DM);
                        omap_cfg_reg(W16_7XX_USB_PU_EN);
                        omap_cfg_reg(W17_7XX_USB_VBUSI);
@@ -147,8 +186,7 @@ static u32 __init omap_usb0_init(unsigned nwires, unsigned is_device)
                        omap_cfg_reg(W4_USB_PUEN);
        }
 
-       /* internal transceiver (unavailable on 17xx, 24xx) */
-       if (!cpu_class_is_omap2() && nwires == 2) {
+       if (nwires == 2) {
                u32 l;
 
                // omap_cfg_reg(P9_USB_DP);
@@ -183,26 +221,18 @@ static u32 __init omap_usb0_init(unsigned nwires, unsigned is_device)
                return 0;
        }
 
-       if (cpu_is_omap24xx()) {
-               omap_cfg_reg(K18_24XX_USB0_DAT);
-               omap_cfg_reg(K19_24XX_USB0_TXEN);
-               omap_cfg_reg(J14_24XX_USB0_SE0);
-               if (nwires != 3)
-                       omap_cfg_reg(J18_24XX_USB0_RCV);
-       } else {
-               omap_cfg_reg(V6_USB0_TXD);
-               omap_cfg_reg(W9_USB0_TXEN);
-               omap_cfg_reg(W5_USB0_SE0);
-               if (nwires != 3)
-                       omap_cfg_reg(Y5_USB0_RCV);
-       }
+       omap_cfg_reg(V6_USB0_TXD);
+       omap_cfg_reg(W9_USB0_TXEN);
+       omap_cfg_reg(W5_USB0_SE0);
+       if (nwires != 3)
+               omap_cfg_reg(Y5_USB0_RCV);
 
        /* NOTE:  SPEED and SUSP aren't configured here.  OTG hosts
         * may be able to use I2C requests to set those bits along
         * with VBUS switching and overcurrent detection.
         */
 
-       if (cpu_class_is_omap1() && nwires != 6) {
+       if (nwires != 6) {
                u32 l;
 
                l = omap_readl(USB_TRANSCEIVER_CTRL);
@@ -213,21 +243,13 @@ static u32 __init omap_usb0_init(unsigned nwires, unsigned is_device)
        switch (nwires) {
        case 3:
                syscon1 = 2;
-               if (cpu_is_omap24xx())
-                       omap2_usb_devconf_set(0, USB_BIDIR);
                break;
        case 4:
                syscon1 = 1;
-               if (cpu_is_omap24xx())
-                       omap2_usb_devconf_set(0, USB_BIDIR);
                break;
        case 6:
                syscon1 = 3;
-               if (cpu_is_omap24xx()) {
-                       omap_cfg_reg(J19_24XX_USB0_VP);
-                       omap_cfg_reg(K20_24XX_USB0_VM);
-                       omap2_usb_devconf_set(0, USB_UNIDIR);
-               } else {
+               {
                        u32 l;
 
                        omap_cfg_reg(AA9_USB0_VP);
@@ -244,30 +266,66 @@ static u32 __init omap_usb0_init(unsigned nwires, unsigned is_device)
        return syscon1 << 16;
 }
 
+static u32 __init omap2_usb1_init(unsigned nwires)
+{
+       u32     syscon1 = 0;
+
+       omap2_usb_devconf_clear(1, USB_BIDIR_TLL);
+
+       if (nwires == 0)
+               return 0;
+
+       /* NOTE:  board-specific code must set up pin muxing for usb1,
+        * since each signal could come out on either of two balls.
+        */
+
+       switch (nwires) {
+       case 2:
+               /* NOTE: board-specific code must override this setting if
+                * this TLL link is not using DP/DM
+                */
+               syscon1 = 1;
+               omap2_usb_devconf_set(1, USB_BIDIR_TLL);
+               break;
+       case 3:
+               syscon1 = 2;
+               omap2_usb_devconf_set(1, USB_BIDIR);
+               break;
+       case 4:
+               syscon1 = 1;
+               omap2_usb_devconf_set(1, USB_BIDIR);
+               break;
+       case 6:
+       default:
+               printk(KERN_ERR "illegal usb%d %d-wire transceiver\n",
+                       1, nwires);
+       }
+
+       return syscon1 << 20;
+}
+
 static u32 __init omap_usb1_init(unsigned nwires)
 {
        u32     syscon1 = 0;
 
-       if (cpu_class_is_omap1() && !cpu_is_omap15xx() && nwires != 6) {
+       if (cpu_is_omap24xx())
+               return omap2_usb1_init(nwires);
+
+       if (!cpu_is_omap15xx() && nwires != 6) {
                u32 l;
 
                l = omap_readl(USB_TRANSCEIVER_CTRL);
                l &= ~CONF_USB1_UNI_R;
                omap_writel(l, USB_TRANSCEIVER_CTRL);
        }
-       if (cpu_is_omap24xx())
-               omap2_usb_devconf_clear(1, USB_BIDIR_TLL);
-
        if (nwires == 0)
                return 0;
 
        /* external transceiver */
-       if (cpu_class_is_omap1()) {
-               omap_cfg_reg(USB1_TXD);
-               omap_cfg_reg(USB1_TXEN);
-               if (nwires != 3)
-                       omap_cfg_reg(USB1_RCV);
-       }
+       omap_cfg_reg(USB1_TXD);
+       omap_cfg_reg(USB1_TXEN);
+       if (nwires != 3)
+               omap_cfg_reg(USB1_RCV);
 
        if (cpu_is_omap15xx()) {
                omap_cfg_reg(USB1_SEO);
@@ -280,10 +338,6 @@ static u32 __init omap_usb1_init(unsigned nwires)
        } else if (cpu_is_omap1710()) {
                omap_cfg_reg(R13_1710_USB1_SE0);
                // SUSP
-       } else if (cpu_is_omap24xx()) {
-               /* NOTE:  board-specific code must set up pin muxing for usb1,
-                * since each signal could come out on either of two balls.
-                */
        } else {
                pr_debug("usb%d cpu unrecognized\n", 1);
                return 0;
@@ -291,27 +345,14 @@ static u32 __init omap_usb1_init(unsigned nwires)
 
        switch (nwires) {
        case 2:
-               if (!cpu_is_omap24xx())
-                       goto bad;
-               /* NOTE: board-specific code must override this setting if
-                * this TLL link is not using DP/DM
-                */
-               syscon1 = 1;
-               omap2_usb_devconf_set(1, USB_BIDIR_TLL);
-               break;
+               goto bad;
        case 3:
                syscon1 = 2;
-               if (cpu_is_omap24xx())
-                       omap2_usb_devconf_set(1, USB_BIDIR);
                break;
        case 4:
                syscon1 = 1;
-               if (cpu_is_omap24xx())
-                       omap2_usb_devconf_set(1, USB_BIDIR);
                break;
        case 6:
-               if (cpu_is_omap24xx())
-                       goto bad;
                syscon1 = 3;
                omap_cfg_reg(USB1_VP);
                omap_cfg_reg(USB1_VM);
@@ -331,20 +372,70 @@ bad:
        return syscon1 << 20;
 }
 
-static u32 __init omap_usb2_init(unsigned nwires, unsigned alt_pingroup)
+static u32 __init omap2_usb2_init(unsigned nwires, unsigned alt_pingroup)
 {
        u32     syscon1 = 0;
 
-       if (cpu_is_omap24xx()) {
-               omap2_usb2_disable_5pinbitll();
-               alt_pingroup = 0;
+       omap2_usb2_disable_5pinbitll();
+       alt_pingroup = 0;
+
+       /* NOTE omap1 erratum: must leave USB2_UNI_R set if usb0 in use */
+       if (alt_pingroup || nwires == 0)
+               return 0;
+
+       omap_cfg_reg(Y11_24XX_USB2_DAT);
+       omap_cfg_reg(AA10_24XX_USB2_SE0);
+       if (nwires > 2)
+               omap_cfg_reg(AA12_24XX_USB2_TXEN);
+       if (nwires > 3)
+               omap_cfg_reg(AA6_24XX_USB2_RCV);
+
+       switch (nwires) {
+       case 2:
+               /* NOTE: board-specific code must override this setting if
+                * this TLL link is not using DP/DM
+                */
+               syscon1 = 1;
+               omap2_usb_devconf_set(2, USB_BIDIR_TLL);
+               break;
+       case 3:
+               syscon1 = 2;
+               omap2_usb_devconf_set(2, USB_BIDIR);
+               break;
+       case 4:
+               syscon1 = 1;
+               omap2_usb_devconf_set(2, USB_BIDIR);
+               break;
+       case 5:
+               omap_cfg_reg(AA4_24XX_USB2_TLLSE0);
+               /* NOTE: board-specific code must override this setting if
+                * this TLL link is not using DP/DM.  Something must also
+                * set up OTG_SYSCON2.HMC_TLL{ATTACH,SPEED}
+                */
+               syscon1 = 3;
+               omap2_usb2_enable_5pinunitll();
+               break;
+       case 6:
+       default:
+               printk(KERN_ERR "illegal usb%d %d-wire transceiver\n",
+                       2, nwires);
        }
 
+       return syscon1 << 24;
+}
+
+static u32 __init omap_usb2_init(unsigned nwires, unsigned alt_pingroup)
+{
+       u32     syscon1 = 0;
+
+       if (cpu_is_omap24xx())
+               return omap2_usb2_init(nwires, alt_pingroup);
+
        /* NOTE omap1 erratum: must leave USB2_UNI_R set if usb0 in use */
        if (alt_pingroup || nwires == 0)
                return 0;
 
-       if (cpu_class_is_omap1() && !cpu_is_omap15xx() && nwires != 6) {
+       if (!cpu_is_omap15xx() && nwires != 6) {
                u32 l;
 
                l = omap_readl(USB_TRANSCEIVER_CTRL);
@@ -367,53 +458,24 @@ static u32 __init omap_usb2_init(unsigned nwires, unsigned alt_pingroup)
                if (nwires != 3)
                        omap_cfg_reg(Y5_USB2_RCV);
                // FIXME omap_cfg_reg(USB2_SPEED);
-       } else if (cpu_is_omap24xx()) {
-               omap_cfg_reg(Y11_24XX_USB2_DAT);
-               omap_cfg_reg(AA10_24XX_USB2_SE0);
-               if (nwires > 2)
-                       omap_cfg_reg(AA12_24XX_USB2_TXEN);
-               if (nwires > 3)
-                       omap_cfg_reg(AA6_24XX_USB2_RCV);
        } else {
                pr_debug("usb%d cpu unrecognized\n", 1);
                return 0;
        }
-       // if (cpu_class_is_omap1()) omap_cfg_reg(USB2_SUSP);
+       // omap_cfg_reg(USB2_SUSP);
 
        switch (nwires) {
        case 2:
-               if (!cpu_is_omap24xx())
-                       goto bad;
-               /* NOTE: board-specific code must override this setting if
-                * this TLL link is not using DP/DM
-                */
-               syscon1 = 1;
-               omap2_usb_devconf_set(2, USB_BIDIR_TLL);
-               break;
+               goto bad;
        case 3:
                syscon1 = 2;
-               if (cpu_is_omap24xx())
-                       omap2_usb_devconf_set(2, USB_BIDIR);
                break;
        case 4:
                syscon1 = 1;
-               if (cpu_is_omap24xx())
-                       omap2_usb_devconf_set(2, USB_BIDIR);
                break;
        case 5:
-               if (!cpu_is_omap24xx())
-                       goto bad;
-               omap_cfg_reg(AA4_24XX_USB2_TLLSE0);
-               /* NOTE: board-specific code must override this setting if
-                * this TLL link is not using DP/DM.  Something must also
-                * set up OTG_SYSCON2.HMC_TLL{ATTACH,SPEED}
-                */
-               syscon1 = 3;
-               omap2_usb2_enable_5pinunitll();
-               break;
+               goto bad;
        case 6:
-               if (cpu_is_omap24xx())
-                       goto bad;
                syscon1 = 3;
                if (cpu_is_omap15xx()) {
                        omap_cfg_reg(USB2_VP);