This patch adds IRQ support for S5P6440 CPU.
Signed-off-by: Adityapratap Sharma <aditya.ps@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
--- /dev/null
+/* linux/arch/arm/mach-s5p6440/include/mach/irqs.h
+ *
+ * Copyright 2009 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * S5P6440 - IRQ definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_S5P_IRQS_H
+#define __ASM_ARCH_S5P_IRQS_H __FILE__
+
+#include <plat/irqs.h>
+
+/* VIC0 */
+
+#define IRQ_EINT0_3 S5P_IRQ_VIC0(0)
+#define IRQ_EINT4_11 S5P_IRQ_VIC0(1)
+#define IRQ_RTC_TIC S5P_IRQ_VIC0(2)
+#define IRQ_IIC1 S5P_IRQ_VIC0(5)
+#define IRQ_I2SV40 S5P_IRQ_VIC0(6)
+#define IRQ_GPS S5P_IRQ_VIC0(7)
+#define IRQ_POST0 S5P_IRQ_VIC0(9)
+#define IRQ_2D S5P_IRQ_VIC0(11)
+#define IRQ_TIMER0_VIC S5P_IRQ_VIC0(23)
+#define IRQ_TIMER1_VIC S5P_IRQ_VIC0(24)
+#define IRQ_TIMER2_VIC S5P_IRQ_VIC0(25)
+#define IRQ_WDT S5P_IRQ_VIC0(26)
+#define IRQ_TIMER3_VIC S5P_IRQ_VIC0(27)
+#define IRQ_TIMER4_VIC S5P_IRQ_VIC0(28)
+#define IRQ_DISPCON0 S5P_IRQ_VIC0(29)
+#define IRQ_DISPCON1 S5P_IRQ_VIC0(30)
+#define IRQ_DISPCON2 S5P_IRQ_VIC0(31)
+
+/* VIC1 */
+
+#define IRQ_EINT12_15 S5P_IRQ_VIC1(0)
+#define IRQ_PCM0 S5P_IRQ_VIC1(2)
+#define IRQ_UART0 S5P_IRQ_VIC1(5)
+#define IRQ_UART1 S5P_IRQ_VIC1(6)
+#define IRQ_UART2 S5P_IRQ_VIC1(7)
+#define IRQ_UART3 S5P_IRQ_VIC1(8)
+#define IRQ_DMA0 S5P_IRQ_VIC1(9)
+#define IRQ_NFC S5P_IRQ_VIC1(13)
+#define IRQ_SPI0 S5P_IRQ_VIC1(16)
+#define IRQ_SPI1 S5P_IRQ_VIC1(17)
+#define IRQ_IIC S5P_IRQ_VIC1(18)
+#define IRQ_DISPCON3 S5P_IRQ_VIC1(19)
+#define IRQ_FIMGVG S5P_IRQ_VIC1(20)
+#define IRQ_EINT_GROUPS S5P_IRQ_VIC1(21)
+#define IRQ_PMUIRQ S5P_IRQ_VIC1(23)
+#define IRQ_HSMMC0 S5P_IRQ_VIC1(24)
+#define IRQ_HSMMC1 S5P_IRQ_VIC1(25)
+#define IRQ_HSMMC2 IRQ_SPI1 /* shared with SPI1 */
+#define IRQ_OTG S5P_IRQ_VIC1(26)
+#define IRQ_DSI S5P_IRQ_VIC1(27)
+#define IRQ_RTC_ALARM S5P_IRQ_VIC1(28)
+#define IRQ_TSI S5P_IRQ_VIC1(29)
+#define IRQ_PENDN S5P_IRQ_VIC1(30)
+#define IRQ_TC IRQ_PENDN
+#define IRQ_ADC S5P_IRQ_VIC1(31)
+
+/*
+ * Since the IRQ_EINT(x) are a linear mapping on s5p6440 we just defined
+ * them as an IRQ_EINT(x) macro from S5P_IRQ_EINT_BASE which we place
+ * after the pair of VICs.
+ */
+
+#define S5P_IRQ_EINT_BASE (S5P_IRQ_VIC1(31) + 6)
+
+#define S5P_EINT(x) ((x) + S5P_IRQ_EINT_BASE)
+#define IRQ_EINT(x) S5P_EINT(x)
+
+/*
+ * Next the external interrupt groups. These are similar to the IRQ_EINT(x)
+ * that they are sourced from the GPIO pins but with a different scheme for
+ * priority and source indication.
+ *
+ * The IRQ_EINT(x) can be thought of as 'group 0' of the available GPIO
+ * interrupts, but for historical reasons they are kept apart from these
+ * next interrupts.
+ *
+ * Use IRQ_EINT_GROUP(group, offset) to get the number for use in the
+ * machine specific support files.
+ */
+
+/* Actually, #6 and #7 are missing in the EINT_GROUP1 */
+#define IRQ_EINT_GROUP1_NR (15)
+#define IRQ_EINT_GROUP2_NR (8)
+#define IRQ_EINT_GROUP5_NR (7)
+#define IRQ_EINT_GROUP6_NR (10)
+/* Actually, #0, #1 and #2 are missing in the EINT_GROUP8 */
+#define IRQ_EINT_GROUP8_NR (11)
+
+#define IRQ_EINT_GROUP_BASE S5P_EINT(16)
+#define IRQ_EINT_GROUP1_BASE (IRQ_EINT_GROUP_BASE + 0)
+#define IRQ_EINT_GROUP2_BASE (IRQ_EINT_GROUP1_BASE + IRQ_EINT_GROUP1_NR)
+#define IRQ_EINT_GROUP5_BASE (IRQ_EINT_GROUP2_BASE + IRQ_EINT_GROUP2_NR)
+#define IRQ_EINT_GROUP6_BASE (IRQ_EINT_GROUP5_BASE + IRQ_EINT_GROUP5_NR)
+#define IRQ_EINT_GROUP8_BASE (IRQ_EINT_GROUP6_BASE + IRQ_EINT_GROUP6_NR)
+
+#define IRQ_EINT_GROUP(grp, x) (IRQ_EINT_GROUP##grp##_BASE + (x))
+
+/* Set the default NR_IRQS */
+
+#define NR_IRQS (IRQ_EINT_GROUP8_BASE + IRQ_EINT_GROUP8_NR + 1)
+
+#endif /* __ASM_ARCH_S5P_IRQS_H */
--- /dev/null
+/* linux/arch/arm/mach-s5p6440/include/mach/regs-irq.h
+ *
+ * Copyright (c) 2009 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * S5P6440 - IRQ register definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_REGS_IRQ_H
+#define __ASM_ARCH_REGS_IRQ_H __FILE__
+
+#include <asm/hardware/vic.h>
+#include <mach/map.h>
+
+#endif /* __ASM_ARCH_REGS_IRQ_H */
--- /dev/null
+/* linux/arch/arm/plat-s5p/include/plat/irqs.h
+ *
+ * Copyright (c) 2009 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * S5P Common IRQ support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_PLAT_S5P_IRQS_H
+#define __ASM_PLAT_S5P_IRQS_H __FILE__
+
+/* we keep the first set of CPU IRQs out of the range of
+ * the ISA space, so that the PC104 has them to itself
+ * and we don't end up having to do horrible things to the
+ * standard ISA drivers....
+ *
+ * note, since we're using the VICs, our start must be a
+ * mulitple of 32 to allow the common code to work
+ */
+
+#define S5P_IRQ_OFFSET (32)
+
+#define S5P_IRQ(x) ((x) + S5P_IRQ_OFFSET)
+
+#define S5P_VIC0_BASE S5P_IRQ(0)
+#define S5P_VIC1_BASE S5P_IRQ(32)
+
+#define IRQ_VIC0_BASE S5P_VIC0_BASE
+#define IRQ_VIC1_BASE S5P_VIC1_BASE
+
+/* UART interrupts, each UART has 4 intterupts per channel so
+ * use the space between the ISA and S3C main interrupts. Note, these
+ * are not in the same order as the S3C24XX series! */
+
+#define IRQ_S5P_UART_BASE0 (16)
+#define IRQ_S5P_UART_BASE1 (20)
+#define IRQ_S5P_UART_BASE2 (24)
+#define IRQ_S5P_UART_BASE3 (28)
+
+#define UART_IRQ_RXD (0)
+#define UART_IRQ_ERR (1)
+#define UART_IRQ_TXD (2)
+
+#define IRQ_S5P_UART_RX0 (IRQ_S5P_UART_BASE0 + UART_IRQ_RXD)
+#define IRQ_S5P_UART_TX0 (IRQ_S5P_UART_BASE0 + UART_IRQ_TXD)
+#define IRQ_S5P_UART_ERR0 (IRQ_S5P_UART_BASE0 + UART_IRQ_ERR)
+
+#define IRQ_S5P_UART_RX1 (IRQ_S5P_UART_BASE1 + UART_IRQ_RXD)
+#define IRQ_S5P_UART_TX1 (IRQ_S5P_UART_BASE1 + UART_IRQ_TXD)
+#define IRQ_S5P_UART_ERR1 (IRQ_S5P_UART_BASE1 + UART_IRQ_ERR)
+
+#define IRQ_S5P_UART_RX2 (IRQ_S5P_UART_BASE2 + UART_IRQ_RXD)
+#define IRQ_S5P_UART_TX2 (IRQ_S5P_UART_BASE2 + UART_IRQ_TXD)
+#define IRQ_S5P_UART_ERR2 (IRQ_S5P_UART_BASE2 + UART_IRQ_ERR)
+
+#define IRQ_S5P_UART_RX3 (IRQ_S5P_UART_BASE3 + UART_IRQ_RXD)
+#define IRQ_S5P_UART_TX3 (IRQ_S5P_UART_BASE3 + UART_IRQ_TXD)
+#define IRQ_S5P_UART_ERR3 (IRQ_S5P_UART_BASE3 + UART_IRQ_ERR)
+
+/* S3C compatibilty defines */
+#define IRQ_S3CUART_RX0 IRQ_S5P_UART_RX0
+#define IRQ_S3CUART_RX1 IRQ_S5P_UART_RX1
+#define IRQ_S3CUART_RX2 IRQ_S5P_UART_RX2
+#define IRQ_S3CUART_RX3 IRQ_S5P_UART_RX3
+
+/* VIC based IRQs */
+
+#define S5P_IRQ_VIC0(x) (S5P_VIC0_BASE + (x))
+#define S5P_IRQ_VIC1(x) (S5P_VIC1_BASE + (x))
+
+#define S5P_TIMER_IRQ(x) S5P_IRQ(64 + (x))
+
+#define IRQ_TIMER0 S5P_TIMER_IRQ(0)
+#define IRQ_TIMER1 S5P_TIMER_IRQ(1)
+#define IRQ_TIMER2 S5P_TIMER_IRQ(2)
+#define IRQ_TIMER3 S5P_TIMER_IRQ(3)
+#define IRQ_TIMER4 S5P_TIMER_IRQ(4)
+
+#endif /* __ASM_PLAT_S5P_IRQS_H */
--- /dev/null
+/* arch/arm/plat-s5p/irq.c
+ *
+ * Copyright (c) 2009 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * S5P - Interrupt handling
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+
+#include <asm/hardware/vic.h>
+
+#include <linux/serial_core.h>
+#include <mach/map.h>
+#include <plat/regs-timer.h>
+#include <plat/regs-serial.h>
+#include <plat/cpu.h>
+#include <plat/irq-vic-timer.h>
+#include <plat/irq-uart.h>
+
+#define VIC_VAADDR(no) (S5P_VA_VIC0 + ((no)*0x10000))
+#define VIC_BASE(no) (S5P_VIC0_BASE + ((no)*32))
+
+/*
+ * Note, we make use of the fact that the parent IRQs, IRQ_UART[0..3]
+ * are consecutive when looking up the interrupt in the demux routines.
+ */
+static struct s3c_uart_irq uart_irqs[] = {
+ [0] = {
+ .regs = S5P_VA_UART0,
+ .base_irq = IRQ_S5P_UART_BASE0,
+ .parent_irq = IRQ_UART0,
+ },
+ [1] = {
+ .regs = S5P_VA_UART1,
+ .base_irq = IRQ_S5P_UART_BASE1,
+ .parent_irq = IRQ_UART1,
+ },
+ [2] = {
+ .regs = S5P_VA_UART2,
+ .base_irq = IRQ_S5P_UART_BASE2,
+ .parent_irq = IRQ_UART2,
+ },
+ [3] = {
+ .regs = S5P_VA_UART3,
+ .base_irq = IRQ_S5P_UART_BASE3,
+ .parent_irq = IRQ_UART3,
+ },
+};
+
+void __init s5p_init_irq(u32 *vic, u32 num_vic)
+{
+ int irq;
+
+ /* initialize the VICs */
+ for (irq = 0; irq < num_vic; irq++)
+ vic_init(VIC_VAADDR(irq), VIC_BASE(irq), vic[irq], 0);
+
+ s3c_init_vic_timer_irq(IRQ_TIMER0_VIC, IRQ_TIMER0);
+ s3c_init_vic_timer_irq(IRQ_TIMER1_VIC, IRQ_TIMER1);
+ s3c_init_vic_timer_irq(IRQ_TIMER2_VIC, IRQ_TIMER2);
+ s3c_init_vic_timer_irq(IRQ_TIMER3_VIC, IRQ_TIMER3);
+ s3c_init_vic_timer_irq(IRQ_TIMER4_VIC, IRQ_TIMER4);
+
+ s3c_init_uart_irqs(uart_irqs, ARRAY_SIZE(uart_irqs));
+}
git://bbs.cooldavid.org / net-next-2.6.git / commitdiff