[ARM] pxa/balloon3: Machine file cleanup

Logically separate parts of the file that are handled by one particular driver.

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>

diff --git a/arch/arm/mach-pxa/balloon3.c b/arch/arm/mach-pxa/balloon3.c
index f3b5ace815e51488f8437f4fc08866e6478e12be..8adb87a036740ff991422344b3c513adbf9bef16 100644 (file)
--- a/arch/arm/mach-pxa/balloon3.c
+++ b/arch/arm/mach-pxa/balloon3.c
@@ -51,87 +51,27 @@
 #include "generic.h"
 #include "devices.h"
 
-static unsigned long balloon3_irq_enabled;
-
-static unsigned long balloon3_features_present =
-               (1 << BALLOON3_FEATURE_OHCI) | (1 << BALLOON3_FEATURE_CF) |
-               (1 << BALLOON3_FEATURE_AUDIO) |
-               (1 << BALLOON3_FEATURE_TOPPOLY);
-
-int balloon3_has(enum balloon3_features feature)
-{
-       return (balloon3_features_present & (1 << feature)) ? 1 : 0;
-}
-EXPORT_SYMBOL_GPL(balloon3_has);
-
-int __init parse_balloon3_features(char *arg)
-{
-       if (!arg)
-               return 0;
-
-       return strict_strtoul(arg, 0, &balloon3_features_present);
-}
-early_param("balloon3_features", parse_balloon3_features);
-
-static void balloon3_mask_irq(unsigned int irq)
-{
-       int balloon3_irq = (irq - BALLOON3_IRQ(0));
-       balloon3_irq_enabled &= ~(1 << balloon3_irq);
-       __raw_writel(~balloon3_irq_enabled, BALLOON3_INT_CONTROL_REG);
-}
+/******************************************************************************
+ * Pin configuration
+ ******************************************************************************/
+static unsigned long balloon3_pin_config[] __initdata = {
+       /* Select BTUART 'COM1/ttyS0' as IO option for pins 42/43/44/45 */
+       GPIO42_BTUART_RXD,
+       GPIO43_BTUART_TXD,
+       GPIO44_BTUART_CTS,
+       GPIO45_BTUART_RTS,
 
-static void balloon3_unmask_irq(unsigned int irq)
-{
-       int balloon3_irq = (irq - BALLOON3_IRQ(0));
-       balloon3_irq_enabled |= (1 << balloon3_irq);
-       __raw_writel(~balloon3_irq_enabled, BALLOON3_INT_CONTROL_REG);
-}
+       /* Wakeup GPIO */
+       GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH,
 
-static struct irq_chip balloon3_irq_chip = {
-       .name           = "FPGA",
-       .ack            = balloon3_mask_irq,
-       .mask           = balloon3_mask_irq,
-       .unmask         = balloon3_unmask_irq,
+       /* NAND & IDLE LED GPIOs */
+       GPIO9_GPIO,
+       GPIO10_GPIO,
 };
 
-static void balloon3_irq_handler(unsigned int irq, struct irq_desc *desc)
-{
-       unsigned long pending = __raw_readl(BALLOON3_INT_CONTROL_REG) &
-                                       balloon3_irq_enabled;
-
-       do {
-               /* clear useless edge notification */
-               if (desc->chip->ack)
-                       desc->chip->ack(BALLOON3_AUX_NIRQ);
-               while (pending) {
-                       irq = BALLOON3_IRQ(0) + __ffs(pending);
-                       generic_handle_irq(irq);
-                       pending &= pending - 1;
-               }
-               pending = __raw_readl(BALLOON3_INT_CONTROL_REG) &
-                               balloon3_irq_enabled;
-       } while (pending);
-}
-
-static void __init balloon3_init_irq(void)
-{
-       int irq;
-
-       pxa27x_init_irq();
-       /* setup extra Balloon3 irqs */
-       for (irq = BALLOON3_IRQ(0); irq <= BALLOON3_IRQ(7); irq++) {
-               set_irq_chip(irq, &balloon3_irq_chip);
-               set_irq_handler(irq, handle_level_irq);
-               set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
-       }
-
-       set_irq_chained_handler(BALLOON3_AUX_NIRQ, balloon3_irq_handler);
-       set_irq_type(BALLOON3_AUX_NIRQ, IRQ_TYPE_EDGE_FALLING);
-
-       pr_debug("%s: chained handler installed - irq %d automatically "
-               "enabled\n", __func__, BALLOON3_AUX_NIRQ);
-}
-
+/******************************************************************************
+ * Audio and Touchscreen
+ ******************************************************************************/
 static unsigned long balloon3_ac97_pin_config[] = {
        GPIO28_AC97_BITCLK,
        GPIO29_AC97_SDATA_IN_0,
@@ -140,19 +80,16 @@ static unsigned long balloon3_ac97_pin_config[] = {
        GPIO113_AC97_nRESET,
 };
 
+/******************************************************************************
+ * Framebuffer
+ ******************************************************************************/
+
 static void balloon3_backlight_power(int on)
 {
        pr_debug("%s: power is %s\n", __func__, on ? "on" : "off");
        gpio_set_value(BALLOON3_GPIO_RUN_BACKLIGHT, on);
 }
 
-static unsigned long balloon3_lcd_pin_config[] = {
-       /* LCD - 16bpp Active TFT */
-       GPIOxx_LCD_TFT_16BPP,
-
-       GPIO99_GPIO,            /* Backlight */
-};
-
 static struct pxafb_mode_info balloon3_lcd_modes[] = {
        {
                .pixclock               = 38000,
@@ -176,6 +113,9 @@ static struct pxafb_mach_info balloon3_pxafb_info = {
        .pxafb_backlight_power  = balloon3_backlight_power,
 };
 
+/******************************************************************************
+ * SD/MMC card controller
+ ******************************************************************************/
 static unsigned long balloon3_mmc_pin_config[] = {
        GPIO32_MMC_CLK,
        GPIO92_MMC_DAT_0,
@@ -203,6 +143,9 @@ static struct pxamci_platform_data balloon3_mci_platform_data = {
        .setpower       = balloon3_mci_setpower,
 };
 
+/******************************************************************************
+ * USB Gadget
+ ******************************************************************************/
 static int balloon3_udc_is_connected(void)
 {
        pr_debug("%s: udc connected\n", __func__);
@@ -228,10 +171,16 @@ static struct pxa2xx_udc_mach_info balloon3_udc_info = {
        .udc_command      = balloon3_udc_command,
 };
 
+/******************************************************************************
+ * IrDA
+ ******************************************************************************/
 static struct pxaficp_platform_data balloon3_ficp_platform_data = {
        .transceiver_cap  = IR_SIRMODE | IR_FIRMODE | IR_OFF,
 };
 
+/******************************************************************************
+ * USB Host
+ ******************************************************************************/
 static unsigned long balloon3_ohci_pin_config[] = {
        GPIO88_USBH1_PWR,
        GPIO89_USBH1_PEN,
@@ -242,21 +191,9 @@ static struct pxaohci_platform_data balloon3_ohci_platform_data = {
        .flags          = ENABLE_PORT_ALL | POWER_CONTROL_LOW | POWER_SENSE_LOW,
 };
 
-static unsigned long balloon3_pin_config[] __initdata = {
-       /* Select BTUART 'COM1/ttyS0' as IO option for pins 42/43/44/45 */
-       GPIO42_BTUART_RXD,
-       GPIO43_BTUART_TXD,
-       GPIO44_BTUART_CTS,
-       GPIO45_BTUART_RTS,
-
-       /* Wakeup GPIO */
-       GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH,
-
-       /* NAND & IDLE LED GPIOs */
-       GPIO9_GPIO,
-       GPIO10_GPIO,
-};
-
+/******************************************************************************
+ * LED
+ ******************************************************************************/
 static struct gpio_led balloon3_gpio_leds[] = {
        {
                .name                   = "balloon3:green:idle",
@@ -285,6 +222,96 @@ static struct platform_device balloon3led_device = {
        },
 };
 
+/******************************************************************************
+ * Compatibility: Parameter parsing
+ ******************************************************************************/
+static unsigned long balloon3_irq_enabled;
+
+static unsigned long balloon3_features_present =
+               (1 << BALLOON3_FEATURE_OHCI) | (1 << BALLOON3_FEATURE_CF) |
+               (1 << BALLOON3_FEATURE_AUDIO) |
+               (1 << BALLOON3_FEATURE_TOPPOLY);
+
+int balloon3_has(enum balloon3_features feature)
+{
+       return (balloon3_features_present & (1 << feature)) ? 1 : 0;
+}
+EXPORT_SYMBOL_GPL(balloon3_has);
+
+int __init parse_balloon3_features(char *arg)
+{
+       if (!arg)
+               return 0;
+
+       return strict_strtoul(arg, 0, &balloon3_features_present);
+}
+early_param("balloon3_features", parse_balloon3_features);
+
+/******************************************************************************
+ * FPGA IRQ
+ ******************************************************************************/
+static void balloon3_mask_irq(unsigned int irq)
+{
+       int balloon3_irq = (irq - BALLOON3_IRQ(0));
+       balloon3_irq_enabled &= ~(1 << balloon3_irq);
+       __raw_writel(~balloon3_irq_enabled, BALLOON3_INT_CONTROL_REG);
+}
+
+static void balloon3_unmask_irq(unsigned int irq)
+{
+       int balloon3_irq = (irq - BALLOON3_IRQ(0));
+       balloon3_irq_enabled |= (1 << balloon3_irq);
+       __raw_writel(~balloon3_irq_enabled, BALLOON3_INT_CONTROL_REG);
+}
+
+static struct irq_chip balloon3_irq_chip = {
+       .name           = "FPGA",
+       .ack            = balloon3_mask_irq,
+       .mask           = balloon3_mask_irq,
+       .unmask         = balloon3_unmask_irq,
+};
+
+static void balloon3_irq_handler(unsigned int irq, struct irq_desc *desc)
+{
+       unsigned long pending = __raw_readl(BALLOON3_INT_CONTROL_REG) &
+                                       balloon3_irq_enabled;
+
+       do {
+               /* clear useless edge notification */
+               if (desc->chip->ack)
+                       desc->chip->ack(BALLOON3_AUX_NIRQ);
+               while (pending) {
+                       irq = BALLOON3_IRQ(0) + __ffs(pending);
+                       generic_handle_irq(irq);
+                       pending &= pending - 1;
+               }
+               pending = __raw_readl(BALLOON3_INT_CONTROL_REG) &
+                               balloon3_irq_enabled;
+       } while (pending);
+}
+
+static void __init balloon3_init_irq(void)
+{
+       int irq;
+
+       pxa27x_init_irq();
+       /* setup extra Balloon3 irqs */
+       for (irq = BALLOON3_IRQ(0); irq <= BALLOON3_IRQ(7); irq++) {
+               set_irq_chip(irq, &balloon3_irq_chip);
+               set_irq_handler(irq, handle_level_irq);
+               set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
+       }
+
+       set_irq_chained_handler(BALLOON3_AUX_NIRQ, balloon3_irq_handler);
+       set_irq_type(BALLOON3_AUX_NIRQ, IRQ_TYPE_EDGE_FALLING);
+
+       pr_debug("%s: chained handler installed - irq %d automatically "
+               "enabled\n", __func__, BALLOON3_AUX_NIRQ);
+}
+
+/******************************************************************************
+ * Machine init
+ ******************************************************************************/
 static void __init balloon3_init(void)
 {
        pr_info("Initialising Balloon3\n");