[ARM] pxa/vpac270: Convert to use PATA PXA driver

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>

diff --git a/arch/arm/mach-pxa/vpac270.c b/arch/arm/mach-pxa/vpac270.c
index 9884fa978f1648262127489ab7ff9e1bb2d539a2..fb4b801dab0376f68e26c07892bbecc7e56ac80e 100644 (file)
--- a/arch/arm/mach-pxa/vpac270.c
+++ b/arch/arm/mach-pxa/vpac270.c
@@ -37,6 +37,7 @@
 #include <mach/ohci.h>
 #include <mach/pxa27x-udc.h>
 #include <mach/udc.h>
+#include <mach/pata_pxa.h>
 
 #include <plat/i2c.h>
 
@@ -538,9 +539,10 @@ static inline void vpac270_lcd_init(void) {}
 /******************************************************************************
  * PATA IDE
  ******************************************************************************/
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
-static struct pata_platform_info vpac270_pata_pdata = {
-       .ioport_shift   = 1,
+#if defined(CONFIG_PATA_PXA) || defined(CONFIG_PATA_PXA_MODULE)
+static struct pata_pxa_pdata vpac270_pata_pdata = {
+       .reg_shift      = 1,
+       .dma_dreq       = 1,
        .irq_flags      = IRQF_TRIGGER_RISING,
 };
 
@@ -555,7 +557,12 @@ static struct resource vpac270_ide_resources[] = {
               .end     = PXA_CS3_PHYS + 0x15f,
               .flags   = IORESOURCE_MEM
        },
-       [2] = { /* IDE IRQ pin */
+       [2] = { /* DMA Base address */
+              .start   = PXA_CS3_PHYS + 0x20,
+              .end     = PXA_CS3_PHYS + 0x2f,
+              .flags   = IORESOURCE_DMA
+       },
+       [3] = { /* IDE IRQ pin */
               .start   = gpio_to_irq(GPIO36_VPAC270_IDE_IRQ),
               .end     = gpio_to_irq(GPIO36_VPAC270_IDE_IRQ),
               .flags   = IORESOURCE_IRQ
@@ -563,11 +570,12 @@ static struct resource vpac270_ide_resources[] = {
 };
 
 static struct platform_device vpac270_ide_device = {
-       .name           = "pata_platform",
+       .name           = "pata_pxa",
        .num_resources  = ARRAY_SIZE(vpac270_ide_resources),
        .resource       = vpac270_ide_resources,
        .dev            = {
                .platform_data  = &vpac270_pata_pdata,
+               .coherent_dma_mask      = 0xffffffff,
        }
 };