sys_sigreturn_wrapper:
add r0, sp, #S_OFF
+ mov why, #0 @ prevent syscall restart handling
b sys_sigreturn
ENDPROC(sys_sigreturn_wrapper)
sys_rt_sigreturn_wrapper:
add r0, sp, #S_OFF
+ mov why, #0 @ prevent syscall restart handling
b sys_rt_sigreturn
ENDPROC(sys_rt_sigreturn_wrapper)
ifdef CONFIG_CC_STACKPROTECTOR
cc_has_sp := $(srctree)/scripts/gcc-x86_$(BITS)-has-stack-protector.sh
- ifeq ($(shell $(CONFIG_SHELL) $(cc_has_sp) $(CC) $(biarch)),y)
+ ifeq ($(shell $(CONFIG_SHELL) $(cc_has_sp) $(CC) $(KBUILD_CPPFLAGS) $(biarch)),y)
stackp-y := -fstack-protector
KBUILD_CFLAGS += $(stackp-y)
else
#endif /* CONFIG_X86_64 */
+#if __GNUC__ >= 4
/*
* Static testing of CPU features. Used the same as boot_cpu_has().
* These are only valid after alternatives have run, but will statically
*/
static __always_inline __pure bool __static_cpu_has(u16 bit)
{
-#if __GNUC__ > 4 || (__GNUC__ == 4 && __GNUC_MINOR__ >= 5)
+#if __GNUC__ > 4 || __GNUC_MINOR__ >= 5
asm goto("1: jmp %l[t_no]\n"
"2:\n"
".section .altinstructions,\"a\"\n"
#endif
}
-#if __GNUC__ >= 4
#define static_cpu_has(bit) \
( \
__builtin_constant_p(boot_cpu_has(bit)) ? \
extern u8 hpet_blockid;
extern int hpet_force_user;
extern u8 hpet_msi_disable;
-extern u8 hpet_readback_cmp;
extern int is_hpet_enabled(void);
extern int hpet_enable(void);
extern void hpet_disable(void);
for (j = 0; j < 64; j++) {
if (!test_bit(j, &present))
continue;
- uv_blade_info[blade].pnode = (i * 64 + j);
+ pnode = (i * 64 + j);
+ uv_blade_info[blade].pnode = pnode;
uv_blade_info[blade].nr_possible_cpus = 0;
uv_blade_info[blade].nr_online_cpus = 0;
+ max_pnode = max(pnode, max_pnode);
blade++;
}
}
uv_cpu_hub_info(cpu)->scir.offset = uv_scir_offset(apicid);
uv_node_to_blade[nid] = blade;
uv_cpu_to_blade[cpu] = blade;
- max_pnode = max(pnode, max_pnode);
}
/* Add blade/pnode info for nodes without cpus */
pnode = (paddr >> m_val) & pnode_mask;
blade = boot_pnode_to_blade(pnode);
uv_node_to_blade[nid] = blade;
- max_pnode = max(pnode, max_pnode);
}
map_gru_high(max_pnode);
#include <asm/apic.h>
#include <asm/iommu.h>
#include <asm/gart.h>
-#include <asm/hpet.h>
static void __init fix_hypertransport_config(int num, int slot, int func)
{
}
#endif
-/*
- * Force the read back of the CMP register in hpet_next_event()
- * to work around the problem that the CMP register write seems to be
- * delayed. See hpet_next_event() for details.
- *
- * We do this on all SMBUS incarnations for now until we have more
- * information about the affected chipsets.
- */
-static void __init ati_hpet_bugs(int num, int slot, int func)
-{
-#ifdef CONFIG_HPET_TIMER
- hpet_readback_cmp = 1;
-#endif
-}
-
#define QFLAG_APPLY_ONCE 0x1
#define QFLAG_APPLIED 0x2
#define QFLAG_DONE (QFLAG_APPLY_ONCE|QFLAG_APPLIED)
PCI_CLASS_SERIAL_SMBUS, PCI_ANY_ID, 0, ati_bugs },
{ PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_SBX00_SMBUS,
PCI_CLASS_SERIAL_SMBUS, PCI_ANY_ID, 0, ati_bugs_contd },
- { PCI_VENDOR_ID_ATI, PCI_ANY_ID,
- PCI_CLASS_SERIAL_SMBUS, PCI_ANY_ID, 0, ati_hpet_bugs },
{}
};
unsigned long hpet_address;
u8 hpet_blockid; /* OS timer block num */
u8 hpet_msi_disable;
-u8 hpet_readback_cmp;
#ifdef CONFIG_PCI_MSI
static unsigned long hpet_num_timers;
* at that point and we would wait for the next hpet interrupt
* forever. We found out that reading the CMP register back
* forces the transfer so we can rely on the comparison with
- * the counter register below.
+ * the counter register below. If the read back from the
+ * compare register does not match the value we programmed
+ * then we might have a real hardware problem. We can not do
+ * much about it here, but at least alert the user/admin with
+ * a prominent warning.
*
- * That works fine on those ATI chipsets, but on newer Intel
- * chipsets (ICH9...) this triggers due to an erratum: Reading
- * the comparator immediately following a write is returning
- * the old value.
+ * An erratum on some chipsets (ICH9,..), results in
+ * comparator read immediately following a write returning old
+ * value. Workaround for this is to read this value second
+ * time, when first read returns old value.
*
- * We restrict the read back to the affected ATI chipsets (set
- * by quirks) and also run it with hpet=verbose for debugging
- * purposes.
+ * In fact the write to the comparator register is delayed up
+ * to two HPET cycles so the workaround we tried to restrict
+ * the readback to those known to be borked ATI chipsets
+ * failed miserably. So we give up on optimizations forever
+ * and penalize all HPET incarnations unconditionally.
*/
- if (hpet_readback_cmp || hpet_verbose) {
- u32 cmp = hpet_readl(HPET_Tn_CMP(timer));
-
- if (cmp != cnt)
+ if (unlikely((u32)hpet_readl(HPET_Tn_CMP(timer)) != cnt)) {
+ if (hpet_readl(HPET_Tn_CMP(timer)) != cnt)
printk_once(KERN_WARNING
- "hpet: compare register read back failed.\n");
+ "hpet: compare register read back failed.\n");
}
return (s32)(hpet_readl(HPET_COUNTER) - cnt) >= 0 ? -ETIME : 0;
obj-y += net/
obj-$(CONFIG_ATM) += atm/
obj-$(CONFIG_FUSION) += message/
-obj-$(CONFIG_FIREWIRE) += firewire/
+obj-y += firewire/
obj-y += ieee1394/
obj-$(CONFIG_UIO) += uio/
obj-y += cdrom/
{PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB38X_FW, QUIRK_NO_MSI},
{PCI_VENDOR_ID_NEC, PCI_ANY_ID, QUIRK_CYCLE_TIMER},
{PCI_VENDOR_ID_VIA, PCI_ANY_ID, QUIRK_CYCLE_TIMER},
+ {PCI_VENDOR_ID_RICOH, PCI_ANY_ID, QUIRK_CYCLE_TIMER},
{PCI_VENDOR_ID_APPLE, PCI_DEVICE_ID_APPLE_UNI_N_FW, QUIRK_BE_HEADERS},
};
bmask = queue_logical_block_size(rdev->bdev->bd_disk->queue)-1;
if (rdev->sb_size & bmask)
rdev->sb_size = (rdev->sb_size | bmask) + 1;
- }
+ } else
+ max_dev = le32_to_cpu(sb->max_dev);
+
for (i=0; i<max_dev;i++)
sb->dev_roles[i] = cpu_to_le16(0xfffe);
if (mddev->ro && !test_bit(MD_RECOVERY_NEEDED, &mddev->recovery))
return;
if ( ! (
- (mddev->flags && !mddev->external) ||
+ (mddev->flags & ~ (1<<MD_CHANGE_PENDING)) ||
test_bit(MD_RECOVERY_NEEDED, &mddev->recovery) ||
test_bit(MD_RECOVERY_DONE, &mddev->recovery) ||
(mddev->external == 0 && mddev->safemode == 1) ||
git://bbs.cooldavid.org / net-next-2.6.git / commitdiff