config ARCH_S5PV210
bool "Samsung S5PV210/S5PC110"
select CPU_V7
+ select ARCH_SPARSEMEM_ENABLE
select GENERIC_GPIO
select HAVE_CLK
select ARM_L1_CACHE_SHIFT_6
+ select ARCH_HAS_CPUFREQ
select ARCH_USES_GETTIMEOFFSET
select HAVE_S3C2410_I2C
select HAVE_S3C_RTC
config ARCH_S5PV310
bool "Samsung S5PV310/S5PC210"
select CPU_V7
+ select ARCH_SPARSEMEM_ENABLE
select GENERIC_GPIO
select HAVE_CLK
select GENERIC_CLOCKEVENTS
+ select HAVE_S3C_RTC
+ select HAVE_S3C2410_I2C
+ select HAVE_S3C2410_WATCHDOG
help
Samsung S5PV310 series based systems
source "drivers/cpufreq/Kconfig"
+config CPU_FREQ_IMX
+ tristate "CPUfreq driver for i.MX CPUs"
+ depends on ARCH_MXC && CPU_FREQ
+ help
+ This enables the CPUfreq driver for i.MX CPUs.
+
config CPU_FREQ_SA1100
bool
CONFIG_INPUT_FF_MEMLESS=m
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_EVDEV=y
+CONFIG_KEYBOARD_GPIO=y
CONFIG_INPUT_EVBUG=m
CONFIG_MOUSE_PS2=m
CONFIG_MOUSE_PS2_ELANTECH=y
#define __ASM_ARM_HARDWARE_L2X0_H
#define L2X0_CACHE_ID 0x000
-#define L2X0_CACHE_ID_PART_MASK (0xf << 6)
-#define L2X0_CACHE_ID_PART_L210 (1 << 6)
-#define L2X0_CACHE_ID_PART_L310 (3 << 6)
#define L2X0_CACHE_TYPE 0x004
#define L2X0_CTRL 0x100
#define L2X0_AUX_CTRL 0x104
#define L2X0_LINE_DATA 0xF10
#define L2X0_LINE_TAG 0xF30
#define L2X0_DEBUG_CTRL 0xF40
+#define L2X0_PREFETCH_CTRL 0xF60
+#define L2X0_POWER_CTRL 0xF80
+#define L2X0_DYNAMIC_CLK_GATING_EN (1 << 1)
+#define L2X0_STNDBY_MODE_EN (1 << 0)
+
+/* Registers shifts and masks */
+#define L2X0_CACHE_ID_PART_MASK (0xf << 6)
+#define L2X0_CACHE_ID_PART_L210 (1 << 6)
+#define L2X0_CACHE_ID_PART_L310 (3 << 6)
+#define L2X0_AUX_CTRL_WAY_SIZE_MASK (0x3 << 17)
#ifndef __ASSEMBLY__
extern void __init l2x0_init(void __iomem *base, __u32 aux_val, __u32 aux_mask);
#ifndef _ASM_ARM_MEMBLOCK_H
#define _ASM_ARM_MEMBLOCK_H
-#ifdef CONFIG_MMU
-extern phys_addr_t lowmem_end_addr;
-#define MEMBLOCK_REAL_LIMIT lowmem_end_addr
-#else
-#define MEMBLOCK_REAL_LIMIT 0
-#endif
-
struct meminfo;
struct machine_desc;
void (*inv_range)(unsigned long, unsigned long);
void (*clean_range)(unsigned long, unsigned long);
void (*flush_range)(unsigned long, unsigned long);
+ void (*flush_all)(void);
+ void (*inv_all)(void);
+ void (*disable)(void);
#ifdef CONFIG_OUTER_CACHE_SYNC
void (*sync)(void);
#endif
outer_cache.flush_range(start, end);
}
+static inline void outer_flush_all(void)
+{
+ if (outer_cache.flush_all)
+ outer_cache.flush_all();
+}
+
+static inline void outer_inv_all(void)
+{
+ if (outer_cache.inv_all)
+ outer_cache.inv_all();
+}
+
+static inline void outer_disable(void)
+{
+ if (outer_cache.disable)
+ outer_cache.disable();
+}
+
#else
static inline void outer_inv_range(unsigned long start, unsigned long end)
{ }
static inline void outer_flush_range(unsigned long start, unsigned long end)
{ }
+static inline void outer_flush_all(void) { }
+static inline void outer_inv_all(void) { }
+static inline void outer_disable(void) { }
#endif
local_fiq_disable();
setup_mm_for_reboot(0); /* mode is not used, so just pass 0*/
flush_cache_all();
+ outer_flush_all();
+ outer_disable();
cpu_proc_fin();
+ outer_inv_all();
flush_cache_all();
cpu_reset(reboot_code_buffer_phys);
}
*(.rodata.*)
*(.glue_7)
*(.glue_7t)
+ . = ALIGN(4);
*(.got) /* Global offset table */
ARM_CPU_KEEP(PROC_INFO)
}
#include <linux/platform_device.h>
#include <linux/gpio.h>
#include <linux/input/matrix_keypad.h>
+#include <linux/irq.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
#include <mach/hardware.h>
#include <mach/common.h>
#include <mach/iomux-mx27.h>
+#include <mach/mmc.h>
#include "devices-imx27.h"
#include "devices.h"
+#define SD1_EN_GPIO (GPIO_PORTB + 25)
+
static const int mx27pdk_pins[] __initconst = {
/* UART1 */
PE12_PF_UART1_TXD,
PD15_AOUT_FEC_COL,
PD16_AIN_FEC_TX_ER,
PF23_AIN_FEC_TX_EN,
+ /* SDHC1 */
+ PE18_PF_SD1_D0,
+ PE19_PF_SD1_D1,
+ PE20_PF_SD1_D2,
+ PE21_PF_SD1_D3,
+ PE22_PF_SD1_CMD,
+ PE23_PF_SD1_CLK,
+ SD1_EN_GPIO | GPIO_GPIO | GPIO_OUT,
};
static const struct imxuart_platform_data uart_pdata __initconst = {
.keymap_size = ARRAY_SIZE(mx27_3ds_keymap),
};
+static int mx27_3ds_sdhc1_init(struct device *dev, irq_handler_t detect_irq,
+ void *data)
+{
+ return request_irq(IRQ_GPIOB(26), detect_irq, IRQF_TRIGGER_FALLING |
+ IRQF_TRIGGER_RISING, "sdhc1-card-detect", data);
+}
+
+static void mx27_3ds_sdhc1_exit(struct device *dev, void *data)
+{
+ free_irq(IRQ_GPIOB(26), data);
+}
+
+static struct imxmmc_platform_data sdhc1_pdata = {
+ .init = mx27_3ds_sdhc1_init,
+ .exit = mx27_3ds_sdhc1_exit,
+};
+
+static void mx27_3ds_sdhc1_enable_level_translator(void)
+{
+ /* Turn on TXB0108 OE pin */
+ gpio_request(SD1_EN_GPIO, "sd1_enable");
+ gpio_direction_output(SD1_EN_GPIO, 1);
+}
+
static void __init mx27pdk_init(void)
{
mxc_gpio_setup_multiple_pins(mx27pdk_pins, ARRAY_SIZE(mx27pdk_pins),
"mx27pdk");
+ mx27_3ds_sdhc1_enable_level_translator();
imx27_add_imx_uart0(&uart_pdata);
imx27_add_fec(NULL);
mxc_register_device(&imx_kpp_device, &mx27_3ds_keymap_data);
+ mxc_register_device(&mxc_sdhc_device0, &sdhc1_pdata);
}
static void __init mx27pdk_timer_init(void)
return offset / ticks_per_usec;
}
-static int ixp2000_timer_interrupt(int irq, void *dev_id)
+static irqreturn_t ixp2000_timer_interrupt(int irq, void *dev_id)
{
/* clear timer 1 */
ixp2000_reg_wrb(IXP2000_T1_CLR, 1);
bool "Support MX25PDK (3DS) Platform"
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_MXC_NAND
+ select IMX_HAVE_PLATFORM_ESDHC
config MACH_EUKREA_CPUIMX25
bool "Support Eukrea CPUIMX25 Platform"
MX25_PAD_KPP_COL1__KPP_COL1,
MX25_PAD_KPP_COL2__KPP_COL2,
MX25_PAD_KPP_COL3__KPP_COL3,
+
+ /* SD1 */
+ MX25_PAD_SD1_CMD__SD1_CMD,
+ MX25_PAD_SD1_CLK__SD1_CLK,
+ MX25_PAD_SD1_DATA0__SD1_DATA0,
+ MX25_PAD_SD1_DATA1__SD1_DATA1,
+ MX25_PAD_SD1_DATA2__SD1_DATA2,
+ MX25_PAD_SD1_DATA3__SD1_DATA3,
};
static const struct fec_platform_data mx25_fec_pdata __initconst = {
mx25pdk_fec_reset();
imx25_add_fec(&mx25_fec_pdata);
mxc_register_device(&mx25_kpp_device, &mx25pdk_keymap_data);
+
+ imx25_add_esdhc(0, NULL);
}
static void __init mx25pdk_timer_init(void)
config MACH_MX35_3DS
bool "Support MX35PDK platform"
select ARCH_MX35
+ select MXC_DEBUG_BOARD
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_MXC_NAND
+ select IMX_HAVE_PLATFORM_ESDHC
default n
help
Include support for MX35PDK platform. This includes specific
#ifdef CONFIG_ARCH_MX31
static struct resource mxcsdhc0_resources[] = {
{
- .start = MMC_SDHC1_BASE_ADDR,
- .end = MMC_SDHC1_BASE_ADDR + SZ_16K - 1,
+ .start = MX31_MMC_SDHC1_BASE_ADDR,
+ .end = MX31_MMC_SDHC1_BASE_ADDR + SZ_16K - 1,
.flags = IORESOURCE_MEM,
}, {
- .start = MXC_INT_MMC_SDHC1,
- .end = MXC_INT_MMC_SDHC1,
+ .start = MX31_INT_MMC_SDHC1,
+ .end = MX31_INT_MMC_SDHC1,
.flags = IORESOURCE_IRQ,
},
};
static struct resource mxcsdhc1_resources[] = {
{
- .start = MMC_SDHC2_BASE_ADDR,
- .end = MMC_SDHC2_BASE_ADDR + SZ_16K - 1,
+ .start = MX31_MMC_SDHC2_BASE_ADDR,
+ .end = MX31_MMC_SDHC2_BASE_ADDR + SZ_16K - 1,
.flags = IORESOURCE_MEM,
}, {
- .start = MXC_INT_MMC_SDHC2,
- .end = MXC_INT_MMC_SDHC2,
+ .start = MX31_INT_MMC_SDHC2,
+ .end = MX31_INT_MMC_SDHC2,
.flags = IORESOURCE_IRQ,
},
};
#include "devices-imx31.h"
#include "devices.h"
-/* Definitions for components on the Debug board */
-
-/* Base address of CPLD controller on the Debug board */
-#define DEBUG_BASE_ADDRESS CS5_IO_ADDRESS(MX3x_CS5_BASE_ADDR)
-
-/* LAN9217 ethernet base address */
-#define LAN9217_BASE_ADDR MX3x_CS5_BASE_ADDR
-
-/* CPLD config and interrupt base address */
-#define CPLD_ADDR (DEBUG_BASE_ADDRESS + 0x20000)
-
-/* status, interrupt */
-#define CPLD_INT_STATUS_REG (CPLD_ADDR + 0x10)
-#define CPLD_INT_MASK_REG (CPLD_ADDR + 0x38)
-#define CPLD_INT_RESET_REG (CPLD_ADDR + 0x20)
-/* magic word for debug CPLD */
-#define CPLD_MAGIC_NUMBER1_REG (CPLD_ADDR + 0x40)
-#define CPLD_MAGIC_NUMBER2_REG (CPLD_ADDR + 0x48)
-/* CPLD code version */
-#define CPLD_CODE_VER_REG (CPLD_ADDR + 0x50)
-/* magic word for debug CPLD */
-#define CPLD_MAGIC_NUMBER3_REG (CPLD_ADDR + 0x58)
-
/* CPLD IRQ line for external uart, external ethernet etc */
#define EXPIO_PARENT_INT IOMUX_TO_IRQ(MX31_PIN_GPIO1_1)
-#define MXC_EXP_IO_BASE (MXC_BOARD_IRQ_START)
-#define MXC_IRQ_TO_EXPIO(irq) ((irq) - MXC_EXP_IO_BASE)
-
-#define EXPIO_INT_ENET (MXC_EXP_IO_BASE + 0)
-
-#define MXC_MAX_EXP_IO_LINES 16
-
/*
* This file contains the board-specific initialization routines.
*/
imx31_add_imx_uart0(&uart_pdata);
imx31_add_mxc_nand(&mx31_3ds_nand_board_info);
- imx31_add_spi_imx0(&spi1_pdata);
+ imx31_add_spi_imx1(&spi1_pdata);
spi_register_board_info(mx31_3ds_spi_devs,
ARRAY_SIZE(mx31_3ds_spi_devs));
mx31_3ds_usbotg_init();
mxc_register_device(&mxc_otg_udc_device, &usbotg_pdata);
- if (!mxc_expio_init(CS5_BASE_ADDR, EXPIO_PARENT_INT))
- printk(KERN_WARNING "Init of the debugboard failed, all "
- "devices on the board are unusable.\n");
+ if (mxc_expio_init(MX31_CS5_BASE_ADDR, EXPIO_PARENT_INT))
+ printk(KERN_WARNING "Init of the debug board failed, all "
+ "devices on the debug board are unusable.\n");
}
static void __init mx31_3ds_timer_init(void)
#include <mach/hardware.h>
#include <mach/common.h>
#include <mach/iomux-mx35.h>
+#include <mach/irqs.h>
+#include <mach/3ds_debugboard.h>
#include <mach/mxc_ehci.h>
#include "devices-imx35.h"
#include "devices.h"
+#define EXPIO_PARENT_INT (MXC_INTERNAL_IRQS + GPIO_PORTA + 1)
+
static const struct imxuart_platform_data uart_pdata __initconst = {
.flags = IMXUART_HAVE_RTSCTS,
};
/* USBH1 */
MX35_PAD_I2C2_CLK__USB_TOP_USBH2_PWR,
MX35_PAD_I2C2_DAT__USB_TOP_USBH2_OC,
+ /* SDCARD */
+ MX35_PAD_SD1_CMD__ESDHC1_CMD,
+ MX35_PAD_SD1_CLK__ESDHC1_CLK,
+ MX35_PAD_SD1_DATA0__ESDHC1_DAT0,
+ MX35_PAD_SD1_DATA1__ESDHC1_DAT1,
+ MX35_PAD_SD1_DATA2__ESDHC1_DAT2,
+ MX35_PAD_SD1_DATA3__ESDHC1_DAT3,
};
/* OTG config */
mxc_register_device(&mxc_usbh1, &usb_host_pdata);
imx35_add_mxc_nand(&mx35pdk_nand_board_info);
+ imx35_add_esdhc(0, NULL);
+
+ if (mxc_expio_init(MX35_CS5_BASE_ADDR, EXPIO_PARENT_INT))
+ pr_warn("Init of the debugboard failed, all "
+ "devices on the debugboard are unusable.\n");
}
static void __init mx35pdk_timer_init(void)
select MXC_TZIC
select ARCH_MXC_IOMUX_V3
select ARCH_MXC_AUDMUX_V2
+ select ARCH_HAS_CPUFREQ
comment "MX5 platforms:"
bool "Support MX51 BABBAGE platforms"
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_UART
+ select IMX_HAVE_PLATFORM_ESDHC
help
Include support for MX51 Babbage platform, also known as MX51EVK in
u-boot. This includes specific configurations for the board and its
# Object file lists.
obj-y := cpu.o mm.o clock-mx51.o devices.o
+obj-$(CONFIG_CPU_FREQ_IMX) += cpu_op-mx51.o
obj-$(CONFIG_MACH_MX51_BABBAGE) += board-mx51_babbage.o
obj-$(CONFIG_MACH_MX51_3DS) += board-mx51_3ds.o
obj-$(CONFIG_MACH_EUKREA_CPUIMX51) += board-cpuimx51.o
/*
- * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved.
* Copyright (C) 2009-2010 Amit Kucheria <amit.kucheria@canonical.com>
*
* The code contained herein is licensed under the GNU General Public
#include <linux/io.h>
#include <linux/fsl_devices.h>
#include <linux/fec.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
#include <mach/common.h>
#include <mach/hardware.h>
#include "devices-imx51.h"
#include "devices.h"
+#include "cpu_op-mx51.h"
#define BABBAGE_USB_HUB_RESET (0*32 + 7) /* GPIO_1_7 */
#define BABBAGE_USBH1_STP (0*32 + 27) /* GPIO_1_27 */
#define BABBAGE_PHY_RESET (1*32 + 5) /* GPIO_2_5 */
#define BABBAGE_FEC_PHY_RESET (1*32 + 14) /* GPIO_2_14 */
+#define BABBAGE_POWER_KEY (1*32 + 21) /* GPIO_2_21 */
/* USB_CTRL_1 */
#define MX51_USB_CTRL_1_OFFSET 0x10
#define MX51_USB_PLL_DIV_19_2_MHZ 0x01
#define MX51_USB_PLL_DIV_24_MHZ 0x02
+static struct gpio_keys_button babbage_buttons[] = {
+ {
+ .gpio = BABBAGE_POWER_KEY,
+ .code = BTN_0,
+ .desc = "PWR",
+ .active_low = 1,
+ .wakeup = 1,
+ },
+};
+
+static const struct gpio_keys_platform_data imx_button_data __initconst = {
+ .buttons = babbage_buttons,
+ .nbuttons = ARRAY_SIZE(babbage_buttons),
+};
+
static struct pad_desc mx51babbage_pads[] = {
/* UART1 */
MX51_PAD_UART1_RXD__UART1_RXD,
/* FEC PHY reset line */
MX51_PAD_EIM_A20__GPIO_2_14,
+
+ /* SD 1 */
+ MX51_PAD_SD1_CMD__SD1_CMD,
+ MX51_PAD_SD1_CLK__SD1_CLK,
+ MX51_PAD_SD1_DATA0__SD1_DATA0,
+ MX51_PAD_SD1_DATA1__SD1_DATA1,
+ MX51_PAD_SD1_DATA2__SD1_DATA2,
+ MX51_PAD_SD1_DATA3__SD1_DATA3,
+
+ /* SD 2 */
+ MX51_PAD_SD2_CMD__SD2_CMD,
+ MX51_PAD_SD2_CLK__SD2_CLK,
+ MX51_PAD_SD2_DATA0__SD2_DATA0,
+ MX51_PAD_SD2_DATA1__SD2_DATA1,
+ MX51_PAD_SD2_DATA2__SD2_DATA2,
+ MX51_PAD_SD2_DATA3__SD2_DATA3,
};
/* Serial ports */
static void __init mxc_board_init(void)
{
struct pad_desc usbh1stp = MX51_PAD_USBH1_STP__USBH1_STP;
+ struct pad_desc power_key = MX51_PAD_EIM_A27__GPIO_2_21;
+#if defined(CONFIG_CPU_FREQ_IMX)
+ get_cpu_op = mx51_get_cpu_op;
+#endif
mxc_iomux_v3_setup_multiple_pads(mx51babbage_pads,
ARRAY_SIZE(mx51babbage_pads));
mxc_init_imx_uart();
babbage_fec_reset();
imx51_add_fec(NULL);
+ /* Set the PAD settings for the pwr key. */
+ power_key.pad_ctrl = MX51_GPIO_PAD_CTRL_2;
+ mxc_iomux_v3_setup_pad(&power_key);
+ imx51_add_gpio_keys(&imx_button_data);
+
imx51_add_imx_i2c(0, &babbage_i2c_data);
imx51_add_imx_i2c(1, &babbage_i2c_data);
mxc_register_device(&mxc_hsi2c_device, &babbage_hsi2c_data);
/* setback USBH1_STP to be function */
mxc_iomux_v3_setup_pad(&usbh1stp);
babbage_usbhub_reset();
+
+ imx51_add_esdhc(0, NULL);
+ imx51_add_esdhc(1, NULL);
}
static void __init mx51_babbage_timer_init(void)
return 0;
}
-static unsigned long clk_arm_get_rate(struct clk *clk)
+static unsigned long clk_cpu_get_rate(struct clk *clk)
{
u32 cacrr, div;
unsigned long parent_rate;
return parent_rate / div;
}
+static int clk_cpu_set_rate(struct clk *clk, unsigned long rate)
+{
+ u32 reg, cpu_podf;
+ unsigned long parent_rate;
+
+ parent_rate = clk_get_rate(clk->parent);
+ cpu_podf = parent_rate / rate - 1;
+ /* use post divider to change freq */
+ reg = __raw_readl(MXC_CCM_CACRR);
+ reg &= ~MXC_CCM_CACRR_ARM_PODF_MASK;
+ reg |= cpu_podf << MXC_CCM_CACRR_ARM_PODF_OFFSET;
+ __raw_writel(reg, MXC_CCM_CACRR);
+
+ return 0;
+}
+
static int _clk_periph_apm_set_parent(struct clk *clk, struct clk *parent)
{
u32 reg, mux;
static struct clk cpu_clk = {
.parent = &pll1_sw_clk,
- .get_rate = clk_arm_get_rate,
+ .get_rate = clk_cpu_get_rate,
+ .set_rate = clk_cpu_set_rate,
};
static struct clk ahb_clk = {
_REGISTER_CLOCK("imx51-cspi.0", NULL, cspi_clk)
_REGISTER_CLOCK("sdhci-esdhc-imx.0", NULL, esdhc1_clk)
_REGISTER_CLOCK("sdhci-esdhc-imx.1", NULL, esdhc2_clk)
+ _REGISTER_CLOCK(NULL, "cpu_clk", cpu_clk)
};
static void clk_tree_init(void)
--- /dev/null
+/*
+ * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/types.h>
+#include <mach/hardware.h>
+#include <linux/kernel.h>
+
+static struct cpu_op mx51_cpu_op[] = {
+ {
+ .cpu_rate = 160000000,},
+ {
+ .cpu_rate = 800000000,},
+};
+
+struct cpu_op *mx51_get_cpu_op(int *op)
+{
+ *op = ARRAY_SIZE(mx51_cpu_op);
+ return mx51_cpu_op;
+}
--- /dev/null
+/*
+ * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+extern struct cpu_op *mx51_get_cpu_op(int *op);
#define imx51_add_fec(pdata) \
imx_add_fec(&imx51_fec_data, pdata)
+#define imx51_add_gpio_keys(pdata) imx_add_gpio_keys(pdata)
+
extern const struct imx_imx_i2c_data imx51_imx_i2c_data[] __initconst;
#define imx51_add_imx_i2c(id, pdata) \
imx_add_imx_i2c(&imx51_imx_i2c_data[id], pdata)
}
#ifdef CONFIG_CACHE_L2X0
+
+static void omap4_l2x0_disable(void)
+{
+ /* Disable PL310 L2 Cache controller */
+ omap_smc1(0x102, 0x0);
+}
+
static int __init omap_l2_cache_init(void)
{
/*
else
l2x0_init(l2cache_base, 0x0e070000, 0xc0000fff);
+ /*
+ * Override default outer_cache.disable with a OMAP4
+ * specific one
+ */
+ outer_cache.disable = omap4_l2x0_disable;
+
return 0;
}
early_initcall(omap_l2_cache_init);
#ifdef CONFIG_CPU_S3C244X
#define ARCH_NR_GPIOS (32 * 9 + CONFIG_S3C24XX_GPIO_EXTRA)
+#elif defined(CONFIG_CPU_S3C2443) || defined(CONFIG_CPU_S3C2416)
+#define ARCH_NR_GPIOS (32 * 12 + CONFIG_S3C24XX_GPIO_EXTRA)
#else
#define ARCH_NR_GPIOS (256 + CONFIG_S3C24XX_GPIO_EXTRA)
#endif
#include <mach/gpio-nrs.h>
#include <mach/gpio-fns.h>
-#ifdef CONFIG_CPU_S3C24XX
-#define S3C_GPIO_END (S3C2410_GPIO_BANKJ + 32)
+#ifdef CONFIG_CPU_S3C244X
+#define S3C_GPIO_END (S3C2410_GPJ(0) + 32)
+#elif defined(CONFIG_CPU_S3C2443) || defined(CONFIG_CPU_S3C2416)
+#define S3C_GPIO_END (S3C2410_GPM(0) + 32)
#else
-#define S3C_GPIO_END (S3C2410_GPIO_BANKH + 32)
+#define S3C_GPIO_END (S3C2410_GPH(0) + 32)
#endif
#define S3C2443_SCLKCON_UARTCLK (1<<8)
#define S3C2443_SCLKCON_USBHOST (1<<1)
+#define S3C2443_PWRCFG_SLEEP (1<<15)
+
#include <asm/div64.h>
static inline unsigned int
#ifndef __ASM_ARCH_VMALLOC_H
#define __ASM_ARCH_VMALLOC_H
-#define VMALLOC_END 0xE0000000UL
+#define VMALLOC_END 0xF6000000UL
#endif /* __ASM_ARCH_VMALLOC_H */
#include <plat/clock.h>
#include <plat/pm.h>
#include <plat/pll.h>
+#include <plat/nand-core.h>
#ifndef CONFIG_CPU_S3C2412_ONLY
void __iomem *s3c24xx_va_gpio2 = S3C24XX_VA_GPIO;
/* rename devices that are s3c2412/s3c2413 specific */
s3c_device_sdi.name = "s3c2412-sdi";
s3c_device_lcd.name = "s3c2412-lcd";
- s3c_device_nand.name = "s3c2412-nand";
+ s3c_nand_setname("s3c2412-nand");
/* alter IRQ of SDI controller */
help
Internal config node for S3C2416 DMA support
+config S3C2416_PM
+ bool
+ help
+ Internal config node to apply S3C2416 power management
+
menu "S3C2416 Machines"
config MACH_SMDK2416
select S3C_DEV_FB
select S3C_DEV_HSMMC
select S3C_DEV_HSMMC1
+ select S3C2416_PM if PM
help
Say Y here if you are using an SMDK2416
obj-$(CONFIG_CPU_S3C2416) += s3c2416.o clock.o
obj-$(CONFIG_CPU_S3C2416) += irq.o
-
+obj-$(CONFIG_S3C2416_PM) += pm.o
#obj-$(CONFIG_S3C2416_DMA) += dma.o
# Machine support
static struct sysdev_driver s3c2416_irq_driver = {
.add = s3c2416_irq_add,
+ .suspend = s3c24xx_irq_suspend,
+ .resume = s3c24xx_irq_resume,
};
static int __init s3c2416_irq_init(void)
--- /dev/null
+/* linux/arch/arm/mach-s3c2416/pm.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * S3C2416 - PM support (Based on Ben Dooks' S3C2412 PM support)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/sysdev.h>
+#include <linux/io.h>
+
+#include <asm/cacheflush.h>
+
+#include <mach/regs-power.h>
+#include <mach/regs-s3c2443-clock.h>
+
+#include <plat/cpu.h>
+#include <plat/pm.h>
+
+extern void s3c2412_sleep_enter(void);
+
+static void s3c2416_cpu_suspend(void)
+{
+ flush_cache_all();
+
+ /* enable wakeup sources regardless of battery state */
+ __raw_writel(S3C2443_PWRCFG_SLEEP, S3C2443_PWRCFG);
+
+ /* set the mode as sleep, 2BED represents "Go to BED" */
+ __raw_writel(0x2BED, S3C2443_PWRMODE);
+
+ s3c2412_sleep_enter();
+}
+
+static void s3c2416_pm_prepare(void)
+{
+ /*
+ * write the magic value u-boot uses to check for resume into
+ * the INFORM0 register, and ensure INFORM1 is set to the
+ * correct address to resume from.
+ */
+ __raw_writel(0x2BED, S3C2412_INFORM0);
+ __raw_writel(virt_to_phys(s3c_cpu_resume), S3C2412_INFORM1);
+}
+
+static int s3c2416_pm_add(struct sys_device *sysdev)
+{
+ pm_cpu_prep = s3c2416_pm_prepare;
+ pm_cpu_sleep = s3c2416_cpu_suspend;
+
+ return 0;
+}
+
+static int s3c2416_pm_suspend(struct sys_device *dev, pm_message_t state)
+{
+ return 0;
+}
+
+static int s3c2416_pm_resume(struct sys_device *dev)
+{
+ /* unset the return-from-sleep amd inform flags */
+ __raw_writel(0x0, S3C2443_PWRMODE);
+ __raw_writel(0x0, S3C2412_INFORM0);
+ __raw_writel(0x0, S3C2412_INFORM1);
+
+ return 0;
+}
+
+static struct sysdev_driver s3c2416_pm_driver = {
+ .add = s3c2416_pm_add,
+ .suspend = s3c2416_pm_suspend,
+ .resume = s3c2416_pm_resume,
+};
+
+static __init int s3c2416_pm_init(void)
+{
+ return sysdev_driver_register(&s3c2416_sysclass, &s3c2416_pm_driver);
+}
+
+arch_initcall(s3c2416_pm_init);
#include <plat/iic-core.h>
#include <plat/fb-core.h>
+#include <plat/nand-core.h>
static struct map_desc s3c2416_iodesc[] __initdata = {
IODESC_ENT(WATCHDOG),
{
s3c24xx_init_uartdevs("s3c2440-uart", s3c2410_uart_resources, cfg, no);
- s3c_device_nand.name = "s3c2416-nand";
+ s3c_nand_setname("s3c2412-nand");
}
/* s3c2416_map_io
#include <plat/cpu.h>
#include <plat/pm.h>
#include <plat/pll.h>
+#include <plat/nand-core.h>
static struct map_desc s3c244x_iodesc[] __initdata = {
IODESC_ENT(CLKPWR),
s3c_device_sdi.name = "s3c2440-sdi";
s3c_device_i2c0.name = "s3c2440-i2c";
- s3c_device_nand.name = "s3c2440-nand";
+ s3c_nand_setname("s3c2440-nand");
s3c_device_ts.name = "s3c2440-ts";
s3c_device_usbgadget.name = "s3c2440-usbgadget";
}
#include <plat/devs.h>
#include <plat/cpu.h>
#include <plat/fb-core.h>
+#include <plat/nand-core.h>
static struct map_desc s3c2443_iodesc[] __initdata = {
IODESC_ENT(WATCHDOG),
s3c24xx_reset_hook = s3c2443_hard_reset;
- s3c_device_nand.name = "s3c2412-nand";
+ s3c_nand_setname("s3c2412-nand");
s3c_fb_setname("s3c2443-fb");
/* change WDT IRQ number */
#ifndef __ASM_ARCH_VMALLOC_H
#define __ASM_ARCH_VMALLOC_H
-#define VMALLOC_END (0xe0000000UL)
+#define VMALLOC_END 0xF6000000UL
#endif /* __ASM_ARCH_VMALLOC_H */
help
Machine support for the A&W6410
+config MACH_MINI6410
+ bool "MINI6410"
+ select CPU_S3C6410
+ select S3C_DEV_HSMMC
+ select S3C_DEV_HSMMC1
+ select S3C64XX_SETUP_SDHCI
+ select S3C_DEV_USB_HOST
+ select S3C_DEV_NAND
+ select S3C_DEV_FB
+ select S3C64XX_SETUP_FB_24BPP
+ select SAMSUNG_DEV_ADC
+ select SAMSUNG_DEV_TS
+ help
+ Machine support for the FriendlyARM MINI6410
+
config MACH_REAL6410
bool "REAL6410"
select CPU_S3C6410
select S3C_DEV_HSMMC
select S3C_DEV_HSMMC1
select S3C64XX_SETUP_SDHCI
+ select S3C_DEV_FB
+ select S3C64XX_SETUP_FB_24BPP
+ select S3C_DEV_NAND
+ select SAMSUNG_DEV_ADC
+ select SAMSUNG_DEV_TS
+ select S3C_DEV_USB_HOST
help
Machine support for the CoreWind REAL6410
obj-$(CONFIG_MACH_SMDK6400) += mach-smdk6400.o
obj-$(CONFIG_MACH_SMDK6410) += mach-smdk6410.o
obj-$(CONFIG_MACH_REAL6410) += mach-real6410.o
+obj-$(CONFIG_MACH_MINI6410) += mach-mini6410.o
obj-$(CONFIG_MACH_NCP) += mach-ncp.o
obj-$(CONFIG_MACH_HMT) += mach-hmt.o
obj-$(CONFIG_MACH_SMARTQ) += mach-smartq.o
#include <plat/audio.h>
#include <plat/gpio-cfg.h>
-#include <mach/gpio-bank-c.h>
-#include <mach/gpio-bank-d.h>
-#include <mach/gpio-bank-e.h>
-#include <mach/gpio-bank-h.h>
-
static int s3c64xx_i2sv3_cfg_gpio(struct platform_device *pdev)
{
+ unsigned int base;
+
switch (pdev->id) {
case 0:
- s3c_gpio_cfgpin(S3C64XX_GPD(0), S3C64XX_GPD0_I2S0_CLK);
- s3c_gpio_cfgpin(S3C64XX_GPD(1), S3C64XX_GPD1_I2S0_CDCLK);
- s3c_gpio_cfgpin(S3C64XX_GPD(2), S3C64XX_GPD2_I2S0_LRCLK);
- s3c_gpio_cfgpin(S3C64XX_GPD(3), S3C64XX_GPD3_I2S0_DI);
- s3c_gpio_cfgpin(S3C64XX_GPD(4), S3C64XX_GPD4_I2S0_D0);
+ base = S3C64XX_GPD(0);
break;
case 1:
- s3c_gpio_cfgpin(S3C64XX_GPE(0), S3C64XX_GPE0_I2S1_CLK);
- s3c_gpio_cfgpin(S3C64XX_GPE(1), S3C64XX_GPE1_I2S1_CDCLK);
- s3c_gpio_cfgpin(S3C64XX_GPE(2), S3C64XX_GPE2_I2S1_LRCLK);
- s3c_gpio_cfgpin(S3C64XX_GPE(3), S3C64XX_GPE3_I2S1_DI);
- s3c_gpio_cfgpin(S3C64XX_GPE(4), S3C64XX_GPE4_I2S1_D0);
+ base = S3C64XX_GPE(0);
break;
default:
printk(KERN_DEBUG "Invalid I2S Controller number: %d\n",
return -EINVAL;
}
+ s3c_gpio_cfgpin_range(base, 5, S3C_GPIO_SFN(3));
+
return 0;
}
static int s3c64xx_i2sv4_cfg_gpio(struct platform_device *pdev)
{
- s3c_gpio_cfgpin(S3C64XX_GPC(4), S3C64XX_GPC4_I2S_V40_DO0);
- s3c_gpio_cfgpin(S3C64XX_GPC(5), S3C64XX_GPC5_I2S_V40_DO1);
- s3c_gpio_cfgpin(S3C64XX_GPC(7), S3C64XX_GPC7_I2S_V40_DO2);
- s3c_gpio_cfgpin(S3C64XX_GPH(6), S3C64XX_GPH6_I2S_V40_BCLK);
- s3c_gpio_cfgpin(S3C64XX_GPH(7), S3C64XX_GPH7_I2S_V40_CDCLK);
- s3c_gpio_cfgpin(S3C64XX_GPH(8), S3C64XX_GPH8_I2S_V40_LRCLK);
- s3c_gpio_cfgpin(S3C64XX_GPH(9), S3C64XX_GPH9_I2S_V40_DI);
+ s3c_gpio_cfgpin(S3C64XX_GPC(4), S3C_GPIO_SFN(5));
+ s3c_gpio_cfgpin(S3C64XX_GPC(5), S3C_GPIO_SFN(5));
+ s3c_gpio_cfgpin(S3C64XX_GPC(7), S3C_GPIO_SFN(5));
+ s3c_gpio_cfgpin_range(S3C64XX_GPH(6), 4, S3C_GPIO_SFN(5));
return 0;
}
static int s3c64xx_pcm_cfg_gpio(struct platform_device *pdev)
{
+ unsigned int base;
+
switch (pdev->id) {
case 0:
- s3c_gpio_cfgpin(S3C64XX_GPD(0), S3C64XX_GPD0_PCM0_SCLK);
- s3c_gpio_cfgpin(S3C64XX_GPD(1), S3C64XX_GPD1_PCM0_EXTCLK);
- s3c_gpio_cfgpin(S3C64XX_GPD(2), S3C64XX_GPD2_PCM0_FSYNC);
- s3c_gpio_cfgpin(S3C64XX_GPD(3), S3C64XX_GPD3_PCM0_SIN);
- s3c_gpio_cfgpin(S3C64XX_GPD(4), S3C64XX_GPD4_PCM0_SOUT);
+ base = S3C64XX_GPD(0);
break;
case 1:
- s3c_gpio_cfgpin(S3C64XX_GPE(0), S3C64XX_GPE0_PCM1_SCLK);
- s3c_gpio_cfgpin(S3C64XX_GPE(1), S3C64XX_GPE1_PCM1_EXTCLK);
- s3c_gpio_cfgpin(S3C64XX_GPE(2), S3C64XX_GPE2_PCM1_FSYNC);
- s3c_gpio_cfgpin(S3C64XX_GPE(3), S3C64XX_GPE3_PCM1_SIN);
- s3c_gpio_cfgpin(S3C64XX_GPE(4), S3C64XX_GPE4_PCM1_SOUT);
+ base = S3C64XX_GPE(0);
break;
default:
printk(KERN_DEBUG "Invalid PCM Controller number: %d\n",
return -EINVAL;
}
+ s3c_gpio_cfgpin_range(base, 5, S3C_GPIO_SFN(2));
return 0;
}
static int s3c64xx_ac97_cfg_gpd(struct platform_device *pdev)
{
- s3c_gpio_cfgpin(S3C64XX_GPD(0), S3C64XX_GPD0_AC97_BITCLK);
- s3c_gpio_cfgpin(S3C64XX_GPD(1), S3C64XX_GPD1_AC97_nRESET);
- s3c_gpio_cfgpin(S3C64XX_GPD(2), S3C64XX_GPD2_AC97_SYNC);
- s3c_gpio_cfgpin(S3C64XX_GPD(3), S3C64XX_GPD3_AC97_SDI);
- s3c_gpio_cfgpin(S3C64XX_GPD(4), S3C64XX_GPD4_AC97_SDO);
-
- return 0;
+ return s3c_gpio_cfgpin_range(S3C64XX_GPD(0), 5, S3C_GPIO_SFN(4));
}
static int s3c64xx_ac97_cfg_gpe(struct platform_device *pdev)
{
- s3c_gpio_cfgpin(S3C64XX_GPE(0), S3C64XX_GPE0_AC97_BITCLK);
- s3c_gpio_cfgpin(S3C64XX_GPE(1), S3C64XX_GPE1_AC97_nRESET);
- s3c_gpio_cfgpin(S3C64XX_GPE(2), S3C64XX_GPE2_AC97_SYNC);
- s3c_gpio_cfgpin(S3C64XX_GPE(3), S3C64XX_GPE3_AC97_SDI);
- s3c_gpio_cfgpin(S3C64XX_GPE(4), S3C64XX_GPE4_AC97_SDO);
-
- return 0;
+ return s3c_gpio_cfgpin_range(S3C64XX_GPE(0), 5, S3C_GPIO_SFN(4));
}
static struct resource s3c64xx_ac97_resource[] = {
.get_pull = s3c_gpio_getpull_updown,
};
-int s3c64xx_gpio2int_gpn(struct gpio_chip *chip, unsigned pin)
-{
- return IRQ_EINT(0) + pin;
-}
-
static struct s3c_gpio_chip gpio_2bit[] = {
{
.base = S3C64XX_GPF_BASE,
},
}, {
.base = S3C64XX_GPN_BASE,
+ .irq_base = IRQ_EINT(0),
.config = &gpio_2bit_cfg_eint10,
.chip = {
.base = S3C64XX_GPN(0),
.ngpio = S3C64XX_GPIO_N_NR,
.label = "GPN",
- .to_irq = s3c64xx_gpio2int_gpn,
+ .to_irq = samsung_gpiolib_to_irq,
},
}, {
.base = S3C64XX_GPO_BASE,
#ifndef __ASM_ARCH_VMALLOC_H
#define __ASM_ARCH_VMALLOC_H
-#define VMALLOC_END 0xE0000000UL
+#define VMALLOC_END 0xF6000000UL
#endif /* __ASM_ARCH_VMALLOC_H */
--- /dev/null
+/* linux/arch/arm/mach-s3c64xx/mach-mini6410.c
+ *
+ * Copyright 2010 Darius Augulis <augulis.darius@gmail.com>
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/fb.h>
+#include <linux/gpio.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/dm9000.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/serial_core.h>
+#include <linux/types.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/map.h>
+#include <mach/regs-fb.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-modem.h>
+#include <mach/regs-srom.h>
+#include <mach/s3c6410.h>
+
+#include <plat/adc.h>
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/fb.h>
+#include <plat/nand.h>
+#include <plat/regs-serial.h>
+#include <plat/ts.h>
+
+#include <video/platform_lcd.h>
+
+#define UCON (S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK)
+#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB)
+#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
+
+static struct s3c2410_uartcfg mini6410_uartcfgs[] __initdata = {
+ [0] = {
+ .hwport = 0,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ },
+ [1] = {
+ .hwport = 1,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ },
+ [2] = {
+ .hwport = 2,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ },
+ [3] = {
+ .hwport = 3,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ },
+};
+
+/* DM9000AEP 10/100 ethernet controller */
+
+static struct resource mini6410_dm9k_resource[] = {
+ [0] = {
+ .start = S3C64XX_PA_XM0CSN1,
+ .end = S3C64XX_PA_XM0CSN1 + 1,
+ .flags = IORESOURCE_MEM
+ },
+ [1] = {
+ .start = S3C64XX_PA_XM0CSN1 + 4,
+ .end = S3C64XX_PA_XM0CSN1 + 5,
+ .flags = IORESOURCE_MEM
+ },
+ [2] = {
+ .start = S3C_EINT(7),
+ .end = S3C_EINT(7),
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL
+ }
+};
+
+static struct dm9000_plat_data mini6410_dm9k_pdata = {
+ .flags = (DM9000_PLATF_16BITONLY | DM9000_PLATF_NO_EEPROM),
+};
+
+static struct platform_device mini6410_device_eth = {
+ .name = "dm9000",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(mini6410_dm9k_resource),
+ .resource = mini6410_dm9k_resource,
+ .dev = {
+ .platform_data = &mini6410_dm9k_pdata,
+ },
+};
+
+static struct mtd_partition mini6410_nand_part[] = {
+ [0] = {
+ .name = "uboot",
+ .size = SZ_1M,
+ .offset = 0,
+ },
+ [1] = {
+ .name = "kernel",
+ .size = SZ_2M,
+ .offset = SZ_1M,
+ },
+ [2] = {
+ .name = "rootfs",
+ .size = MTDPART_SIZ_FULL,
+ .offset = SZ_1M + SZ_2M,
+ },
+};
+
+static struct s3c2410_nand_set mini6410_nand_sets[] = {
+ [0] = {
+ .name = "nand",
+ .nr_chips = 1,
+ .nr_partitions = ARRAY_SIZE(mini6410_nand_part),
+ .partitions = mini6410_nand_part,
+ },
+};
+
+static struct s3c2410_platform_nand mini6410_nand_info = {
+ .tacls = 25,
+ .twrph0 = 55,
+ .twrph1 = 40,
+ .nr_sets = ARRAY_SIZE(mini6410_nand_sets),
+ .sets = mini6410_nand_sets,
+};
+
+static struct s3c_fb_pd_win mini6410_fb_win[] = {
+ {
+ .win_mode = { /* 4.3" 480x272 */
+ .left_margin = 3,
+ .right_margin = 2,
+ .upper_margin = 1,
+ .lower_margin = 1,
+ .hsync_len = 40,
+ .vsync_len = 1,
+ .xres = 480,
+ .yres = 272,
+ },
+ .max_bpp = 32,
+ .default_bpp = 16,
+ }, {
+ .win_mode = { /* 7.0" 800x480 */
+ .left_margin = 8,
+ .right_margin = 13,
+ .upper_margin = 7,
+ .lower_margin = 5,
+ .hsync_len = 3,
+ .vsync_len = 1,
+ .xres = 800,
+ .yres = 480,
+ },
+ .max_bpp = 32,
+ .default_bpp = 16,
+ },
+};
+
+static struct s3c_fb_platdata mini6410_lcd_pdata __initdata = {
+ .setup_gpio = s3c64xx_fb_gpio_setup_24bpp,
+ .win[0] = &mini6410_fb_win[0],
+ .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
+ .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
+};
+
+static void mini6410_lcd_power_set(struct plat_lcd_data *pd,
+ unsigned int power)
+{
+ if (power)
+ gpio_direction_output(S3C64XX_GPE(0), 1);
+ else
+ gpio_direction_output(S3C64XX_GPE(0), 0);
+}
+
+static struct plat_lcd_data mini6410_lcd_power_data = {
+ .set_power = mini6410_lcd_power_set,
+};
+
+static struct platform_device mini6410_lcd_powerdev = {
+ .name = "platform-lcd",
+ .dev.parent = &s3c_device_fb.dev,
+ .dev.platform_data = &mini6410_lcd_power_data,
+};
+
+static struct s3c2410_ts_mach_info s3c_ts_platform __initdata = {
+ .delay = 10000,
+ .presc = 49,
+ .oversampling_shift = 2,
+};
+
+static struct platform_device *mini6410_devices[] __initdata = {
+ &mini6410_device_eth,
+ &s3c_device_hsmmc0,
+ &s3c_device_hsmmc1,
+ &s3c_device_ohci,
+ &s3c_device_nand,
+ &s3c_device_fb,
+ &mini6410_lcd_powerdev,
+ &s3c_device_adc,
+ &s3c_device_ts,
+};
+
+static void __init mini6410_map_io(void)
+{
+ u32 tmp;
+
+ s3c64xx_init_io(NULL, 0);
+ s3c24xx_init_clocks(12000000);
+ s3c24xx_init_uarts(mini6410_uartcfgs, ARRAY_SIZE(mini6410_uartcfgs));
+
+ /* set the LCD type */
+ tmp = __raw_readl(S3C64XX_SPCON);
+ tmp &= ~S3C64XX_SPCON_LCD_SEL_MASK;
+ tmp |= S3C64XX_SPCON_LCD_SEL_RGB;
+ __raw_writel(tmp, S3C64XX_SPCON);
+
+ /* remove the LCD bypass */
+ tmp = __raw_readl(S3C64XX_MODEM_MIFPCON);
+ tmp &= ~MIFPCON_LCD_BYPASS;
+ __raw_writel(tmp, S3C64XX_MODEM_MIFPCON);
+}
+
+/*
+ * mini6410_features string
+ *
+ * 0-9 LCD configuration
+ *
+ */
+static char mini6410_features_str[12] __initdata = "0";
+
+static int __init mini6410_features_setup(char *str)
+{
+ if (str)
+ strlcpy(mini6410_features_str, str,
+ sizeof(mini6410_features_str));
+ return 1;
+}
+
+__setup("mini6410=", mini6410_features_setup);
+
+#define FEATURE_SCREEN (1 << 0)
+
+struct mini6410_features_t {
+ int done;
+ int lcd_index;
+};
+
+static void mini6410_parse_features(
+ struct mini6410_features_t *features,
+ const char *features_str)
+{
+ const char *fp = features_str;
+
+ features->done = 0;
+ features->lcd_index = 0;
+
+ while (*fp) {
+ char f = *fp++;
+
+ switch (f) {
+ case '0'...'9': /* tft screen */
+ if (features->done & FEATURE_SCREEN) {
+ printk(KERN_INFO "MINI6410: '%c' ignored, "
+ "screen type already set\n", f);
+ } else {
+ int li = f - '0';
+ if (li >= ARRAY_SIZE(mini6410_fb_win))
+ printk(KERN_INFO "MINI6410: '%c' out "
+ "of range LCD mode\n", f);
+ else {
+ features->lcd_index = li;
+ }
+ }
+ features->done |= FEATURE_SCREEN;
+ break;
+ }
+ }
+}
+
+static void __init mini6410_machine_init(void)
+{
+ u32 cs1;
+ struct mini6410_features_t features = { 0 };
+
+ printk(KERN_INFO "MINI6410: Option string mini6410=%s\n",
+ mini6410_features_str);
+
+ /* Parse the feature string */
+ mini6410_parse_features(&features, mini6410_features_str);
+
+ mini6410_lcd_pdata.win[0] = &mini6410_fb_win[features.lcd_index];
+
+ printk(KERN_INFO "MINI6410: selected LCD display is %dx%d\n",
+ mini6410_lcd_pdata.win[0]->win_mode.xres,
+ mini6410_lcd_pdata.win[0]->win_mode.yres);
+
+ s3c_nand_set_platdata(&mini6410_nand_info);
+ s3c_fb_set_platdata(&mini6410_lcd_pdata);
+ s3c24xx_ts_set_platdata(&s3c_ts_platform);
+
+ /* configure nCS1 width to 16 bits */
+
+ cs1 = __raw_readl(S3C64XX_SROM_BW) &
+ ~(S3C64XX_SROM_BW__CS_MASK << S3C64XX_SROM_BW__NCS1__SHIFT);
+ cs1 |= ((1 << S3C64XX_SROM_BW__DATAWIDTH__SHIFT) |
+ (1 << S3C64XX_SROM_BW__WAITENABLE__SHIFT) |
+ (1 << S3C64XX_SROM_BW__BYTEENABLE__SHIFT)) <<
+ S3C64XX_SROM_BW__NCS1__SHIFT;
+ __raw_writel(cs1, S3C64XX_SROM_BW);
+
+ /* set timing for nCS1 suitable for ethernet chip */
+
+ __raw_writel((0 << S3C64XX_SROM_BCX__PMC__SHIFT) |
+ (6 << S3C64XX_SROM_BCX__TACP__SHIFT) |
+ (4 << S3C64XX_SROM_BCX__TCAH__SHIFT) |
+ (1 << S3C64XX_SROM_BCX__TCOH__SHIFT) |
+ (13 << S3C64XX_SROM_BCX__TACC__SHIFT) |
+ (4 << S3C64XX_SROM_BCX__TCOS__SHIFT) |
+ (0 << S3C64XX_SROM_BCX__TACS__SHIFT), S3C64XX_SROM_BC1);
+
+ gpio_request(S3C64XX_GPF(15), "LCD power");
+ gpio_request(S3C64XX_GPE(0), "LCD power");
+
+ platform_add_devices(mini6410_devices, ARRAY_SIZE(mini6410_devices));
+}
+
+MACHINE_START(MINI6410, "MINI6410")
+ /* Maintainer: Darius Augulis <augulis.darius@gmail.com> */
+ .boot_params = S3C64XX_PA_SDRAM + 0x100,
+ .init_irq = s3c6410_init_irq,
+ .map_io = mini6410_map_io,
+ .init_machine = mini6410_machine_init,
+ .timer = &s3c24xx_timer,
+MACHINE_END
*
*/
-#include <linux/kernel.h>
-#include <linux/types.h>
+#include <linux/init.h>
#include <linux/interrupt.h>
+#include <linux/fb.h>
+#include <linux/gpio.h>
+#include <linux/kernel.h>
#include <linux/list.h>
-#include <linux/init.h>
#include <linux/dm9000.h>
-#include <linux/serial_core.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
#include <linux/platform_device.h>
+#include <linux/serial_core.h>
+#include <linux/types.h>
+
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
+
#include <mach/map.h>
-#include <mach/s3c6410.h>
+#include <mach/regs-fb.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-modem.h>
#include <mach/regs-srom.h>
+#include <mach/s3c6410.h>
+
+#include <plat/adc.h>
#include <plat/cpu.h>
#include <plat/devs.h>
+#include <plat/fb.h>
+#include <plat/nand.h>
#include <plat/regs-serial.h>
+#include <plat/ts.h>
+
+#include <video/platform_lcd.h>
#define UCON (S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK)
#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB)
},
};
+static struct s3c_fb_pd_win real6410_fb_win[] = {
+ {
+ .win_mode = { /* 4.3" 480x272 */
+ .left_margin = 3,
+ .right_margin = 2,
+ .upper_margin = 1,
+ .lower_margin = 1,
+ .hsync_len = 40,
+ .vsync_len = 1,
+ .xres = 480,
+ .yres = 272,
+ },
+ .max_bpp = 32,
+ .default_bpp = 16,
+ }, {
+ .win_mode = { /* 7.0" 800x480 */
+ .left_margin = 8,
+ .right_margin = 13,
+ .upper_margin = 7,
+ .lower_margin = 5,
+ .hsync_len = 3,
+ .vsync_len = 1,
+ .xres = 800,
+ .yres = 480,
+ },
+ .max_bpp = 32,
+ .default_bpp = 16,
+ },
+};
+
+static struct s3c_fb_platdata real6410_lcd_pdata __initdata = {
+ .setup_gpio = s3c64xx_fb_gpio_setup_24bpp,
+ .win[0] = &real6410_fb_win[0],
+ .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
+ .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
+};
+
+static struct mtd_partition real6410_nand_part[] = {
+ [0] = {
+ .name = "uboot",
+ .size = SZ_1M,
+ .offset = 0,
+ },
+ [1] = {
+ .name = "kernel",
+ .size = SZ_2M,
+ .offset = SZ_1M,
+ },
+ [2] = {
+ .name = "rootfs",
+ .size = MTDPART_SIZ_FULL,
+ .offset = SZ_1M + SZ_2M,
+ },
+};
+
+static struct s3c2410_nand_set real6410_nand_sets[] = {
+ [0] = {
+ .name = "nand",
+ .nr_chips = 1,
+ .nr_partitions = ARRAY_SIZE(real6410_nand_part),
+ .partitions = real6410_nand_part,
+ },
+};
+
+static struct s3c2410_platform_nand real6410_nand_info = {
+ .tacls = 25,
+ .twrph0 = 55,
+ .twrph1 = 40,
+ .nr_sets = ARRAY_SIZE(real6410_nand_sets),
+ .sets = real6410_nand_sets,
+};
+
static struct platform_device *real6410_devices[] __initdata = {
&real6410_device_eth,
&s3c_device_hsmmc0,
&s3c_device_hsmmc1,
+ &s3c_device_fb,
+ &s3c_device_nand,
+ &s3c_device_adc,
+ &s3c_device_ts,
+ &s3c_device_ohci,
+};
+
+static struct s3c2410_ts_mach_info s3c_ts_platform __initdata = {
+ .delay = 10000,
+ .presc = 49,
+ .oversampling_shift = 2,
};
static void __init real6410_map_io(void)
{
+ u32 tmp;
+
s3c64xx_init_io(NULL, 0);
s3c24xx_init_clocks(12000000);
s3c24xx_init_uarts(real6410_uartcfgs, ARRAY_SIZE(real6410_uartcfgs));
+
+ /* set the LCD type */
+ tmp = __raw_readl(S3C64XX_SPCON);
+ tmp &= ~S3C64XX_SPCON_LCD_SEL_MASK;
+ tmp |= S3C64XX_SPCON_LCD_SEL_RGB;
+ __raw_writel(tmp, S3C64XX_SPCON);
+
+ /* remove the LCD bypass */
+ tmp = __raw_readl(S3C64XX_MODEM_MIFPCON);
+ tmp &= ~MIFPCON_LCD_BYPASS;
+ __raw_writel(tmp, S3C64XX_MODEM_MIFPCON);
+}
+
+/*
+ * real6410_features string
+ *
+ * 0-9 LCD configuration
+ *
+ */
+static char real6410_features_str[12] __initdata = "0";
+
+static int __init real6410_features_setup(char *str)
+{
+ if (str)
+ strlcpy(real6410_features_str, str,
+ sizeof(real6410_features_str));
+ return 1;
+}
+
+__setup("real6410=", real6410_features_setup);
+
+#define FEATURE_SCREEN (1 << 0)
+
+struct real6410_features_t {
+ int done;
+ int lcd_index;
+};
+
+static void real6410_parse_features(
+ struct real6410_features_t *features,
+ const char *features_str)
+{
+ const char *fp = features_str;
+
+ features->done = 0;
+ features->lcd_index = 0;
+
+ while (*fp) {
+ char f = *fp++;
+
+ switch (f) {
+ case '0'...'9': /* tft screen */
+ if (features->done & FEATURE_SCREEN) {
+ printk(KERN_INFO "REAL6410: '%c' ignored, "
+ "screen type already set\n", f);
+ } else {
+ int li = f - '0';
+ if (li >= ARRAY_SIZE(real6410_fb_win))
+ printk(KERN_INFO "REAL6410: '%c' out "
+ "of range LCD mode\n", f);
+ else {
+ features->lcd_index = li;
+ }
+ }
+ features->done |= FEATURE_SCREEN;
+ break;
+ }
+ }
}
static void __init real6410_machine_init(void)
{
u32 cs1;
+ struct real6410_features_t features = { 0 };
+
+ printk(KERN_INFO "REAL6410: Option string real6410=%s\n",
+ real6410_features_str);
+
+ /* Parse the feature string */
+ real6410_parse_features(&features, real6410_features_str);
+
+ real6410_lcd_pdata.win[0] = &real6410_fb_win[features.lcd_index];
+
+ printk(KERN_INFO "REAL6410: selected LCD display is %dx%d\n",
+ real6410_lcd_pdata.win[0]->win_mode.xres,
+ real6410_lcd_pdata.win[0]->win_mode.yres);
+
+ s3c_fb_set_platdata(&real6410_lcd_pdata);
+ s3c_nand_set_platdata(&real6410_nand_info);
+ s3c24xx_ts_set_platdata(&s3c_ts_platform);
/* configure nCS1 width to 16 bits */
(4 << S3C64XX_SROM_BCX__TCOS__SHIFT) |
(0 << S3C64XX_SROM_BCX__TACS__SHIFT), S3C64XX_SROM_BC1);
+ gpio_request(S3C64XX_GPF(15), "LCD power");
+
platform_add_devices(real6410_devices, ARRAY_SIZE(real6410_devices));
}
extern void s3c64xx_fb_gpio_setup_24bpp(void)
{
- unsigned int gpio;
-
- for (gpio = S3C64XX_GPI(0); gpio <= S3C64XX_GPI(15); gpio++) {
- s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
- s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
- }
-
- for (gpio = S3C64XX_GPJ(0); gpio <= S3C64XX_GPJ(11); gpio++) {
- s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
- s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
- }
+ s3c_gpio_cfgrange_nopull(S3C64XX_GPI(0), 16, S3C_GPIO_SFN(2));
+ s3c_gpio_cfgrange_nopull(S3C64XX_GPJ(0), 12, S3C_GPIO_SFN(2));
}
#include <mach/map.h>
#include <mach/regs-clock.h>
#include <plat/gpio-cfg.h>
+#include <plat/ata.h>
void s3c64xx_ide_setup_gpio(void)
{
u32 reg;
- u32 gpio = 0;
reg = readl(S3C_MEM_SYS_CFG) & (~0x3f);
s3c_gpio_cfgpin(S3C64XX_GPB(4), S3C_GPIO_SFN(4));
/* Set XhiDATA[15:0] pins as CF Data[15:0] */
- for (gpio = S3C64XX_GPK(0); gpio <= S3C64XX_GPK(15); gpio++)
- s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(5));
+ s3c_gpio_cfgpin_range(S3C64XX_GPK(0), 16, S3C_GPIO_SFN(5));
/* Set XhiADDR[2:0] pins as CF ADDR[2:0] */
- for (gpio = S3C64XX_GPL(0); gpio <= S3C64XX_GPL(2); gpio++)
- s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(6));
+ s3c_gpio_cfgpin_range(S3C64XX_GPL(0), 3, S3C_GPIO_SFN(6));
/* Set Xhi ctrl pins as CF ctrl pins(IORDY, IOWR, IORD, CE[0:1]) */
s3c_gpio_cfgpin(S3C64XX_GPM(5), S3C_GPIO_SFN(1));
- for (gpio = S3C64XX_GPM(0); gpio <= S3C64XX_GPM(4); gpio++)
- s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(6));
+ s3c_gpio_cfgpin_range(S3C64XX_GPM(0), 5, S3C_GPIO_SFN(6));
}
#include <linux/gpio.h>
#include <plat/gpio-cfg.h>
+#include <plat/keypad.h>
void samsung_keypad_cfg_gpio(unsigned int rows, unsigned int cols)
{
- unsigned int gpio;
- unsigned int end;
-
/* Set all the necessary GPK pins to special-function 3: KP_ROW[x] */
- end = S3C64XX_GPK(8 + rows);
- for (gpio = S3C64XX_GPK(8); gpio < end; gpio++) {
- s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(3));
- s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
- }
+ s3c_gpio_cfgrange_nopull(S3C64XX_GPK(8), 8 + rows, S3C_GPIO_SFN(3));
/* Set all the necessary GPL pins to special-function 3: KP_COL[x] */
- end = S3C64XX_GPL(0 + cols);
- for (gpio = S3C64XX_GPL(0); gpio < end; gpio++) {
- s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(3));
- s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
- }
+ s3c_gpio_cfgrange_nopull(S3C64XX_GPL(0), cols, S3C_GPIO_SFN(3));
}
void s3c64xx_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width)
{
struct s3c_sdhci_platdata *pdata = dev->dev.platform_data;
- unsigned int gpio;
- unsigned int end;
- end = S3C64XX_GPG(2 + width);
-
- /* Set all the necessary GPG pins to special-function 0 */
- for (gpio = S3C64XX_GPG(0); gpio < end; gpio++) {
- s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
- s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
- }
+ /* Set all the necessary GPG pins to special-function 2 */
+ s3c_gpio_cfgrange_nopull(S3C64XX_GPG(0), 2 + width, S3C_GPIO_SFN(2));
if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) {
s3c_gpio_setpull(S3C64XX_GPG(6), S3C_GPIO_PULL_UP);
void s3c64xx_setup_sdhci1_cfg_gpio(struct platform_device *dev, int width)
{
struct s3c_sdhci_platdata *pdata = dev->dev.platform_data;
- unsigned int gpio;
- unsigned int end;
- end = S3C64XX_GPH(2 + width);
-
- /* Set all the necessary GPG pins to special-function 0 */
- for (gpio = S3C64XX_GPH(0); gpio < end; gpio++) {
- s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
- s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
- }
+ /* Set all the necessary GPH pins to special-function 2 */
+ s3c_gpio_cfgrange_nopull(S3C64XX_GPH(0), 2 + width, S3C_GPIO_SFN(2));
if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) {
s3c_gpio_setpull(S3C64XX_GPG(6), S3C_GPIO_PULL_UP);
void s3c64xx_setup_sdhci2_cfg_gpio(struct platform_device *dev, int width)
{
- unsigned int gpio;
- unsigned int end;
+ /* Set all the necessary GPH pins to special-function 3 */
+ s3c_gpio_cfgrange_nopull(S3C64XX_GPH(6), width, S3C_GPIO_SFN(3));
- end = S3C64XX_GPH(6 + width);
-
- /* Set all the necessary GPH pins to special-function 1 */
- for (gpio = S3C64XX_GPH(6); gpio < end; gpio++) {
- s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(3));
- s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
- }
-
- /* Set all the necessary GPC pins to special-function 1 */
- for (gpio = S3C64XX_GPC(4); gpio < S3C64XX_GPC(6); gpio++) {
- s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(3));
- s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
- }
+ /* Set all the necessary GPC pins to special-function 3 */
+ s3c_gpio_cfgrange_nopull(S3C64XX_GPC(4), 2, S3C_GPIO_SFN(3));
}
config CPU_S5P6442
bool
- select PLAT_S5P
select S3C_PL330_DMA
help
Enable S5P6442 CPU support
.parent = &clk_hclkd1,
};
+int s5p6442_clk_ip0_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(S5P_CLKGATE_IP0, clk, enable);
+}
+
int s5p6442_clk_ip3_ctrl(struct clk *clk, int enable)
{
return s5p_gatectrl(S5P_CLKGATE_IP3, clk, enable);
clk_pclkd1.rate = pclkd1;
}
+static struct clk init_clocks_disable[] = {
+ {
+ .name = "pdma",
+ .id = -1,
+ .parent = &clk_pclkd1,
+ .enable = s5p6442_clk_ip0_ctrl,
+ .ctrlbit = (1 << 3),
+ },
+};
+
static struct clk init_clocks[] = {
{
.name = "systimer",
void __init s5p6442_register_clocks(void)
{
+ struct clk *clkptr;
+ int i, ret;
+
s3c24xx_register_clocks(clks, ARRAY_SIZE(clks));
s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs));
s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks));
+ clkptr = init_clocks_disable;
+ for (i = 0; i < ARRAY_SIZE(init_clocks_disable); i++, clkptr++) {
+ ret = s3c24xx_register_clock(clkptr);
+ if (ret < 0) {
+ printk(KERN_ERR "Fail to register clock %s (%d)\n",
+ clkptr->name, ret);
+ } else
+ (clkptr->enable)(clkptr, 0);
+ }
+
s3c_pwmclk_init();
}
static int s5p6442_cfg_i2s(struct platform_device *pdev)
{
+ unsigned int base;
+
/* configure GPIO for i2s port */
switch (pdev->id) {
case 1:
- s3c_gpio_cfgpin(S5P6442_GPC1(0), S3C_GPIO_SFN(2));
- s3c_gpio_cfgpin(S5P6442_GPC1(1), S3C_GPIO_SFN(2));
- s3c_gpio_cfgpin(S5P6442_GPC1(2), S3C_GPIO_SFN(2));
- s3c_gpio_cfgpin(S5P6442_GPC1(3), S3C_GPIO_SFN(2));
- s3c_gpio_cfgpin(S5P6442_GPC1(4), S3C_GPIO_SFN(2));
+ base = S5P6442_GPC1(0);
break;
case -1:
- s3c_gpio_cfgpin(S5P6442_GPC0(0), S3C_GPIO_SFN(2));
- s3c_gpio_cfgpin(S5P6442_GPC0(1), S3C_GPIO_SFN(2));
- s3c_gpio_cfgpin(S5P6442_GPC0(2), S3C_GPIO_SFN(2));
- s3c_gpio_cfgpin(S5P6442_GPC0(3), S3C_GPIO_SFN(2));
- s3c_gpio_cfgpin(S5P6442_GPC0(4), S3C_GPIO_SFN(2));
+ base = S5P6442_GPC0(0);
break;
default:
return -EINVAL;
}
+ s3c_gpio_cfgpin_range(base, 5, S3C_GPIO_SFN(2));
return 0;
}
static int s5p6442_pcm_cfg_gpio(struct platform_device *pdev)
{
+ unsigned int base;
+
switch (pdev->id) {
case 0:
- s3c_gpio_cfgpin(S5P6442_GPC0(0), S3C_GPIO_SFN(3));
- s3c_gpio_cfgpin(S5P6442_GPC0(1), S3C_GPIO_SFN(3));
- s3c_gpio_cfgpin(S5P6442_GPC0(2), S3C_GPIO_SFN(3));
- s3c_gpio_cfgpin(S5P6442_GPC0(3), S3C_GPIO_SFN(3));
- s3c_gpio_cfgpin(S5P6442_GPC0(4), S3C_GPIO_SFN(3));
+ base = S5P6442_GPC0(0);
break;
case 1:
- s3c_gpio_cfgpin(S5P6442_GPC1(0), S3C_GPIO_SFN(3));
- s3c_gpio_cfgpin(S5P6442_GPC1(1), S3C_GPIO_SFN(3));
- s3c_gpio_cfgpin(S5P6442_GPC1(2), S3C_GPIO_SFN(3));
- s3c_gpio_cfgpin(S5P6442_GPC1(3), S3C_GPIO_SFN(3));
- s3c_gpio_cfgpin(S5P6442_GPC1(4), S3C_GPIO_SFN(3));
+ base = S5P6442_GPC1(0);
break;
default:
return -EINVAL;
}
+ s3c_gpio_cfgpin_range(base, 5, S3C_GPIO_SFN(3));
return 0;
}
switch (pdev->id) {
case 0:
s3c_gpio_cfgpin(S5P6442_GPB(0), S3C_GPIO_SFN(2));
- s3c_gpio_cfgpin(S5P6442_GPB(2), S3C_GPIO_SFN(2));
- s3c_gpio_cfgpin(S5P6442_GPB(3), S3C_GPIO_SFN(2));
s3c_gpio_setpull(S5P6442_GPB(0), S3C_GPIO_PULL_UP);
- s3c_gpio_setpull(S5P6442_GPB(2), S3C_GPIO_PULL_UP);
- s3c_gpio_setpull(S5P6442_GPB(3), S3C_GPIO_PULL_UP);
+ s3c_gpio_cfgall_range(S5P6442_GPB(2), 2,
+ S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
break;
default:
static struct platform_device s5p6442_device_pdma = {
.name = "s3c-pl330",
- .id = 1,
+ .id = -1,
.num_resources = ARRAY_SIZE(s5p6442_pdma_resource),
.resource = s5p6442_pdma_resource,
.dev = {
#define S5P_CLK_DIV5 S5P_CLKREG(0x314)
#define S5P_CLK_DIV6 S5P_CLKREG(0x318)
+#define S5P_CLKGATE_IP0 S5P_CLKREG(0x460)
#define S5P_CLKGATE_IP3 S5P_CLKREG(0x46C)
/* CLK_OUT */
#ifndef __ASM_ARCH_VMALLOC_H
#define __ASM_ARCH_VMALLOC_H
-#define VMALLOC_END 0xE0000000UL
+#define VMALLOC_END 0xF6000000UL
#endif /* __ASM_ARCH_VMALLOC_H */
config CPU_S5P6440
bool
- select PLAT_S5P
select S3C_PL330_DMA
help
Enable S5P6440 CPU support
config CPU_S5P6450
bool
- select PLAT_S5P
select S3C_PL330_DMA
help
Enable S5P6450 CPU support
__raw_writel(epll_con, S5P64X0_EPLL_CON);
__raw_writel(epll_con_k, S5P64X0_EPLL_CON_K);
+ printk(KERN_WARNING "EPLL Rate changes from %lu to %lu\n",
+ clk->rate, rate);
+
clk->rate = rate;
return 0;
}
static struct clk_ops s5p6440_epll_ops = {
- .get_rate = s5p64x0_epll_get_rate,
+ .get_rate = s5p_epll_get_rate,
.set_rate = s5p6440_epll_set_rate,
};
.parent = &clk_hclk.clk,
.enable = s5p64x0_hclk0_ctrl,
.ctrlbit = (1 << 8),
+ }, {
+ .name = "pdma",
+ .id = -1,
+ .parent = &clk_hclk_low.clk,
+ .enable = s5p64x0_hclk0_ctrl,
+ .ctrlbit = (1 << 12),
}, {
.name = "hsmmc",
.id = 0,
.parent = &clk_hclk.clk,
.enable = s5p64x0_hclk0_ctrl,
.ctrlbit = (1 << 21),
- }, {
- .name = "dma",
- .id = -1,
- .parent = &clk_hclk_low.clk,
- .enable = s5p64x0_hclk0_ctrl,
- .ctrlbit = (1 << 12),
}, {
.name = "uart",
.id = 0,
/* Set S5P6440 functions for clk_fout_epll */
- clk_fout_epll.enable = s5p64x0_epll_enable;
+ clk_fout_epll.enable = s5p_epll_enable;
clk_fout_epll.ops = &s5p6440_epll_ops;
clk_48m.enable = s5p64x0_clk48m_ctrl;
__raw_writel(epll_con, S5P64X0_EPLL_CON);
__raw_writel(epll_con_k, S5P64X0_EPLL_CON_K);
+ printk(KERN_WARNING "EPLL Rate changes from %lu to %lu\n",
+ clk->rate, rate);
+
clk->rate = rate;
return 0;
}
static struct clk_ops s5p6450_epll_ops = {
- .get_rate = s5p64x0_epll_get_rate,
+ .get_rate = s5p_epll_get_rate,
.set_rate = s5p6450_epll_set_rate,
};
.parent = &clk_hclk_low.clk,
.enable = s5p64x0_hclk0_ctrl,
.ctrlbit = (1 << 3),
+ }, {
+ .name = "pdma",
+ .id = -1,
+ .parent = &clk_hclk_low.clk,
+ .enable = s5p64x0_hclk0_ctrl,
+ .ctrlbit = (1 << 12),
}, {
.name = "hsmmc",
.id = 0,
.parent = &clk_hclk.clk,
.enable = s5p64x0_hclk0_ctrl,
.ctrlbit = (1 << 21),
- }, {
- .name = "dma",
- .id = -1,
- .parent = &clk_hclk_low.clk,
- .enable = s5p64x0_hclk0_ctrl,
- .ctrlbit = (1 << 12),
}, {
.name = "uart",
.id = 0,
/* Set S5P6450 functions for clk_fout_epll */
- clk_fout_epll.enable = s5p64x0_epll_enable;
+ clk_fout_epll.enable = s5p_epll_enable;
clk_fout_epll.ops = &s5p6450_epll_ops;
clk_48m.enable = s5p64x0_clk48m_ctrl;
{L2 * 1000, (3 << ARM_DIV_RATIO_SHIFT), (0 << S5P64X0_CLKDIV0_HCLK_SHIFT)},
};
-int s5p64x0_epll_enable(struct clk *clk, int enable)
-{
- unsigned int ctrlbit = clk->ctrlbit;
- unsigned int epll_con = __raw_readl(S5P64X0_EPLL_CON) & ~ctrlbit;
-
- if (enable)
- __raw_writel(epll_con | ctrlbit, S5P64X0_EPLL_CON);
- else
- __raw_writel(epll_con, S5P64X0_EPLL_CON);
-
- return 0;
-}
-
-unsigned long s5p64x0_epll_get_rate(struct clk *clk)
-{
- return clk->rate;
-}
-
unsigned long s5p64x0_armclk_get_rate(struct clk *clk)
{
unsigned long rate = clk_get_rate(clk->parent);
/* configure GPIO for i2s port */
switch (pdev->id) {
case -1:
- s3c_gpio_cfgpin(S5P6440_GPR(4), S3C_GPIO_SFN(5));
- s3c_gpio_cfgpin(S5P6440_GPR(5), S3C_GPIO_SFN(5));
- s3c_gpio_cfgpin(S5P6440_GPR(6), S3C_GPIO_SFN(5));
- s3c_gpio_cfgpin(S5P6440_GPR(7), S3C_GPIO_SFN(5));
- s3c_gpio_cfgpin(S5P6440_GPR(8), S3C_GPIO_SFN(5));
- s3c_gpio_cfgpin(S5P6440_GPR(13), S3C_GPIO_SFN(5));
- s3c_gpio_cfgpin(S5P6440_GPR(14), S3C_GPIO_SFN(5));
+ s3c_gpio_cfgpin_range(S5P6440_GPR(4), 5, S3C_GPIO_SFN(5));
+ s3c_gpio_cfgpin_range(S5P6440_GPR(13), 2, S3C_GPIO_SFN(5));
break;
default:
switch (pdev->id) {
case -1:
s3c_gpio_cfgpin(S5P6450_GPB(4), S3C_GPIO_SFN(5));
- s3c_gpio_cfgpin(S5P6450_GPR(4), S3C_GPIO_SFN(5));
- s3c_gpio_cfgpin(S5P6450_GPR(5), S3C_GPIO_SFN(5));
- s3c_gpio_cfgpin(S5P6450_GPR(6), S3C_GPIO_SFN(5));
- s3c_gpio_cfgpin(S5P6450_GPR(7), S3C_GPIO_SFN(5));
- s3c_gpio_cfgpin(S5P6450_GPR(8), S3C_GPIO_SFN(5));
- s3c_gpio_cfgpin(S5P6450_GPR(13), S3C_GPIO_SFN(5));
- s3c_gpio_cfgpin(S5P6450_GPR(14), S3C_GPIO_SFN(5));
+ s3c_gpio_cfgpin_range(S5P6450_GPR(4), 5, S3C_GPIO_SFN(5));
+ s3c_gpio_cfgpin_range(S5P6450_GPR(13), 2, S3C_GPIO_SFN(5));
+
break;
default:
{
switch (pdev->id) {
case 0:
- s3c_gpio_cfgpin(S5P6440_GPR(7), S3C_GPIO_SFN(2));
- s3c_gpio_cfgpin(S5P6440_GPR(13), S3C_GPIO_SFN(2));
- s3c_gpio_cfgpin(S5P6440_GPR(14), S3C_GPIO_SFN(2));
- s3c_gpio_cfgpin(S5P6440_GPR(8), S3C_GPIO_SFN(2));
- s3c_gpio_cfgpin(S5P6440_GPR(6), S3C_GPIO_SFN(2));
+ s3c_gpio_cfgpin_range(S5P6440_GPR(6), 3, S3C_GPIO_SFN(2));
+ s3c_gpio_cfgpin_range(S5P6440_GPR(13), 2, S3C_GPIO_SFN(2));
break;
default:
*/
static int s5p6440_spi_cfg_gpio(struct platform_device *pdev)
{
+ unsigned int base;
+
switch (pdev->id) {
case 0:
- s3c_gpio_cfgpin(S5P6440_GPC(0), S3C_GPIO_SFN(2));
- s3c_gpio_cfgpin(S5P6440_GPC(1), S3C_GPIO_SFN(2));
- s3c_gpio_cfgpin(S5P6440_GPC(2), S3C_GPIO_SFN(2));
- s3c_gpio_setpull(S5P6440_GPC(0), S3C_GPIO_PULL_UP);
- s3c_gpio_setpull(S5P6440_GPC(1), S3C_GPIO_PULL_UP);
- s3c_gpio_setpull(S5P6440_GPC(2), S3C_GPIO_PULL_UP);
+ base = S5P6440_GPC(0);
break;
case 1:
- s3c_gpio_cfgpin(S5P6440_GPC(4), S3C_GPIO_SFN(2));
- s3c_gpio_cfgpin(S5P6440_GPC(5), S3C_GPIO_SFN(2));
- s3c_gpio_cfgpin(S5P6440_GPC(6), S3C_GPIO_SFN(2));
- s3c_gpio_setpull(S5P6440_GPC(4), S3C_GPIO_PULL_UP);
- s3c_gpio_setpull(S5P6440_GPC(5), S3C_GPIO_PULL_UP);
- s3c_gpio_setpull(S5P6440_GPC(6), S3C_GPIO_PULL_UP);
+ base = S5P6440_GPC(4);
break;
default:
return -EINVAL;
}
+ s3c_gpio_cfgall_range(base, 3,
+ S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
+
return 0;
}
static int s5p6450_spi_cfg_gpio(struct platform_device *pdev)
{
+ unsigned int base;
+
switch (pdev->id) {
case 0:
- s3c_gpio_cfgpin(S5P6450_GPC(0), S3C_GPIO_SFN(2));
- s3c_gpio_cfgpin(S5P6450_GPC(1), S3C_GPIO_SFN(2));
- s3c_gpio_cfgpin(S5P6450_GPC(2), S3C_GPIO_SFN(2));
- s3c_gpio_setpull(S5P6450_GPC(0), S3C_GPIO_PULL_UP);
- s3c_gpio_setpull(S5P6450_GPC(1), S3C_GPIO_PULL_UP);
- s3c_gpio_setpull(S5P6450_GPC(2), S3C_GPIO_PULL_UP);
+ base = S5P6450_GPC(0);
break;
case 1:
- s3c_gpio_cfgpin(S5P6450_GPC(4), S3C_GPIO_SFN(2));
- s3c_gpio_cfgpin(S5P6450_GPC(5), S3C_GPIO_SFN(2));
- s3c_gpio_cfgpin(S5P6450_GPC(6), S3C_GPIO_SFN(2));
- s3c_gpio_setpull(S5P6450_GPC(4), S3C_GPIO_PULL_UP);
- s3c_gpio_setpull(S5P6450_GPC(5), S3C_GPIO_PULL_UP);
- s3c_gpio_setpull(S5P6450_GPC(6), S3C_GPIO_PULL_UP);
+ base = S5P6450_GPC(4);
break;
default:
return -EINVAL;
}
+ s3c_gpio_cfgall_range(base, 3,
+ S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
+
return 0;
}
static struct platform_device s5p64x0_device_pdma = {
.name = "s3c-pl330",
- .id = 0,
+ .id = -1,
.num_resources = ARRAY_SIZE(s5p64x0_pdma_resource),
.resource = s5p64x0_pdma_resource,
.dev = {
#define ARM_DIV_RATIO_SHIFT 0
#define ARM_DIV_MASK (0xF << ARM_DIV_RATIO_SHIFT)
+#define S5P_EPLL_CON S5P64X0_EPLL_CON
+
#endif /* __ASM_ARCH_REGS_CLOCK_H */
#ifndef __ASM_ARCH_VMALLOC_H
#define __ASM_ARCH_VMALLOC_H
-#define VMALLOC_END 0xE0000000UL
+#define VMALLOC_END 0xF6000000UL
#endif /* __ASM_ARCH_VMALLOC_H */
void s5p6440_i2c0_cfg_gpio(struct platform_device *dev)
{
- s3c_gpio_cfgpin(S5P6440_GPB(5), S3C_GPIO_SFN(2));
- s3c_gpio_setpull(S5P6440_GPB(5), S3C_GPIO_PULL_UP);
- s3c_gpio_cfgpin(S5P6440_GPB(6), S3C_GPIO_SFN(2));
- s3c_gpio_setpull(S5P6440_GPB(6), S3C_GPIO_PULL_UP);
+ s3c_gpio_cfgall_range(S5P6440_GPB(5), 2,
+ S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
}
void s5p6450_i2c0_cfg_gpio(struct platform_device *dev)
{
- s3c_gpio_cfgpin(S5P6450_GPB(5), S3C_GPIO_SFN(2));
- s3c_gpio_setpull(S5P6450_GPB(5), S3C_GPIO_PULL_UP);
- s3c_gpio_cfgpin(S5P6450_GPB(6), S3C_GPIO_SFN(2));
- s3c_gpio_setpull(S5P6450_GPB(6), S3C_GPIO_PULL_UP);
+ s3c_gpio_cfgall_range(S5P6450_GPB(5), 2,
+ S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
}
void s3c_i2c0_cfg_gpio(struct platform_device *dev) { }
void s5p6440_i2c1_cfg_gpio(struct platform_device *dev)
{
- s3c_gpio_cfgpin(S5P6440_GPR(9), S3C_GPIO_SFN(6));
- s3c_gpio_setpull(S5P6440_GPR(9), S3C_GPIO_PULL_UP);
- s3c_gpio_cfgpin(S5P6440_GPR(10), S3C_GPIO_SFN(6));
- s3c_gpio_setpull(S5P6440_GPR(10), S3C_GPIO_PULL_UP);
+ s3c_gpio_cfgall_range(S5P6440_GPR(9), 2,
+ S3C_GPIO_SFN(6), S3C_GPIO_PULL_UP);
}
void s5p6450_i2c1_cfg_gpio(struct platform_device *dev)
{
- s3c_gpio_cfgpin(S5P6450_GPR(9), S3C_GPIO_SFN(6));
- s3c_gpio_setpull(S5P6450_GPR(9), S3C_GPIO_PULL_UP);
- s3c_gpio_cfgpin(S5P6450_GPR(10), S3C_GPIO_SFN(6));
- s3c_gpio_setpull(S5P6450_GPR(10), S3C_GPIO_PULL_UP);
+ s3c_gpio_cfgall_range(S5P6450_GPR(9), 2,
+ S3C_GPIO_SFN(6), S3C_GPIO_PULL_UP);
}
void s3c_i2c1_cfg_gpio(struct platform_device *dev) { }
config CPU_S5PC100
bool
- select PLAT_S5P
select S5P_EXT_INT
select S3C_PL330_DMA
help
# Core support for S5PC100 system
-obj-$(CONFIG_CPU_S5PC100) += cpu.o init.o clock.o gpiolib.o irq-gpio.o
+obj-$(CONFIG_CPU_S5PC100) += cpu.o init.o clock.o gpiolib.o
obj-$(CONFIG_CPU_S5PC100) += setup-i2c0.o
obj-$(CONFIG_CPU_S5PC100) += dma.o
.reg_div = { .reg = S5P_CLK_DIV3, .shift = 28, .size = 4 },
};
-static int s5pc100_epll_enable(struct clk *clk, int enable)
-{
- unsigned int ctrlbit = clk->ctrlbit;
- unsigned int epll_con = __raw_readl(S5P_EPLL_CON) & ~ctrlbit;
-
- if (enable)
- __raw_writel(epll_con | ctrlbit, S5P_EPLL_CON);
- else
- __raw_writel(epll_con, S5P_EPLL_CON);
-
- return 0;
-}
-
-static unsigned long s5pc100_epll_get_rate(struct clk *clk)
-{
- return clk->rate;
-}
-
static u32 epll_div[][4] = {
{ 32750000, 131, 3, 4 },
{ 32768000, 131, 3, 4 },
__raw_writel(epll_con, S5P_EPLL_CON);
+ printk(KERN_WARNING "EPLL Rate changes from %lu to %lu\n",
+ clk->rate, rate);
+
clk->rate = rate;
return 0;
}
static struct clk_ops s5pc100_epll_ops = {
- .get_rate = s5pc100_epll_get_rate,
+ .get_rate = s5p_epll_get_rate,
.set_rate = s5pc100_epll_set_rate,
};
}, {
.name = "iis",
.id = 0,
- .parent = &clk_div_d1_bus.clk,
+ .parent = &clk_div_pclkd1.clk,
.enable = s5pc100_d1_5_ctrl,
.ctrlbit = (1 << 0),
}, {
.name = "iis",
.id = 1,
- .parent = &clk_div_d1_bus.clk,
+ .parent = &clk_div_pclkd1.clk,
.enable = s5pc100_d1_5_ctrl,
.ctrlbit = (1 << 1),
}, {
.name = "iis",
.id = 2,
- .parent = &clk_div_d1_bus.clk,
+ .parent = &clk_div_pclkd1.clk,
.enable = s5pc100_d1_5_ctrl,
.ctrlbit = (1 << 2),
}, {
.name = "ac97",
.id = -1,
- .parent = &clk_div_d1_bus.clk,
+ .parent = &clk_div_pclkd1.clk,
.enable = s5pc100_d1_5_ctrl,
.ctrlbit = (1 << 3),
}, {
.name = "pcm",
.id = 0,
- .parent = &clk_div_d1_bus.clk,
+ .parent = &clk_div_pclkd1.clk,
.enable = s5pc100_d1_5_ctrl,
.ctrlbit = (1 << 4),
}, {
.name = "pcm",
.id = 1,
- .parent = &clk_div_d1_bus.clk,
+ .parent = &clk_div_pclkd1.clk,
.enable = s5pc100_d1_5_ctrl,
.ctrlbit = (1 << 5),
}, {
.name = "spdif",
.id = -1,
- .parent = &clk_div_d1_bus.clk,
+ .parent = &clk_div_pclkd1.clk,
.enable = s5pc100_d1_5_ctrl,
.ctrlbit = (1 << 6),
}, {
.name = "adc",
.id = -1,
- .parent = &clk_div_d1_bus.clk,
+ .parent = &clk_div_pclkd1.clk,
.enable = s5pc100_d1_5_ctrl,
.ctrlbit = (1 << 7),
}, {
.name = "keypad",
.id = -1,
- .parent = &clk_div_d1_bus.clk,
+ .parent = &clk_div_pclkd1.clk,
.enable = s5pc100_d1_5_ctrl,
.ctrlbit = (1 << 8),
}, {
.nr_sources = ARRAY_SIZE(clk_src_group3_list),
};
+static struct clksrc_clk clk_sclk_audio0 = {
+ .clk = {
+ .name = "sclk_audio",
+ .id = 0,
+ .ctrlbit = (1 << 8),
+ .enable = s5pc100_sclk1_ctrl,
+ },
+ .sources = &clk_src_group3,
+ .reg_src = { .reg = S5P_CLK_SRC3, .shift = 12, .size = 3 },
+ .reg_div = { .reg = S5P_CLK_DIV4, .shift = 12, .size = 4 },
+};
+
static struct clk *clk_src_group4_list[] = {
[0] = &clk_mout_epll.clk,
[1] = &clk_div_mpll.clk,
.nr_sources = ARRAY_SIZE(clk_src_group4_list),
};
+static struct clksrc_clk clk_sclk_audio1 = {
+ .clk = {
+ .name = "sclk_audio",
+ .id = 1,
+ .ctrlbit = (1 << 9),
+ .enable = s5pc100_sclk1_ctrl,
+ },
+ .sources = &clk_src_group4,
+ .reg_src = { .reg = S5P_CLK_SRC3, .shift = 16, .size = 3 },
+ .reg_div = { .reg = S5P_CLK_DIV4, .shift = 16, .size = 4 },
+};
+
static struct clk *clk_src_group5_list[] = {
[0] = &clk_mout_epll.clk,
[1] = &clk_div_mpll.clk,
.nr_sources = ARRAY_SIZE(clk_src_group5_list),
};
+static struct clksrc_clk clk_sclk_audio2 = {
+ .clk = {
+ .name = "sclk_audio",
+ .id = 2,
+ .ctrlbit = (1 << 10),
+ .enable = s5pc100_sclk1_ctrl,
+ },
+ .sources = &clk_src_group5,
+ .reg_src = { .reg = S5P_CLK_SRC3, .shift = 20, .size = 3 },
+ .reg_div = { .reg = S5P_CLK_DIV4, .shift = 20, .size = 4 },
+};
+
static struct clk *clk_src_group6_list[] = {
[0] = &s5p_clk_27m,
[1] = &clk_vclk54m,
.nr_sources = ARRAY_SIZE(clk_src_pwi_list),
};
+static struct clk *clk_sclk_spdif_list[] = {
+ [0] = &clk_sclk_audio0.clk,
+ [1] = &clk_sclk_audio1.clk,
+ [2] = &clk_sclk_audio2.clk,
+};
+
+struct clksrc_sources clk_src_sclk_spdif = {
+ .sources = clk_sclk_spdif_list,
+ .nr_sources = ARRAY_SIZE(clk_sclk_spdif_list),
+};
+
+static int s5pc100_spdif_set_rate(struct clk *clk, unsigned long rate)
+{
+ struct clk *pclk;
+ int ret;
+
+ pclk = clk_get_parent(clk);
+ if (IS_ERR(pclk))
+ return -EINVAL;
+
+ ret = pclk->ops->set_rate(pclk, rate);
+ clk_put(pclk);
+
+ return ret;
+}
+
+static unsigned long s5pc100_spdif_get_rate(struct clk *clk)
+{
+ struct clk *pclk;
+ int rate;
+
+ pclk = clk_get_parent(clk);
+ if (IS_ERR(pclk))
+ return -EINVAL;
+
+ rate = pclk->ops->get_rate(clk);
+ clk_put(pclk);
+
+ return rate;
+}
+
+static struct clk_ops s5pc100_sclk_spdif_ops = {
+ .set_rate = s5pc100_spdif_set_rate,
+ .get_rate = s5pc100_spdif_get_rate,
+};
+
+static struct clksrc_clk clk_sclk_spdif = {
+ .clk = {
+ .name = "sclk_spdif",
+ .id = -1,
+ .ctrlbit = (1 << 11),
+ .enable = s5pc100_sclk1_ctrl,
+ .ops = &s5pc100_sclk_spdif_ops,
+ },
+ .sources = &clk_src_sclk_spdif,
+ .reg_src = { .reg = S5P_CLK_SRC3, .shift = 24, .size = 2 },
+};
+
static struct clksrc_clk clksrcs[] = {
{
.clk = {
},
.sources = &clk_src_group6,
.reg_src = { .reg = S5P_CLK_SRC2, .shift = 28, .size = 2 },
- }, {
- .clk = {
- .name = "sclk_audio",
- .id = 0,
- .ctrlbit = (1 << 8),
- .enable = s5pc100_sclk1_ctrl,
-
- },
- .sources = &clk_src_group3,
- .reg_src = { .reg = S5P_CLK_SRC3, .shift = 12, .size = 3 },
- .reg_div = { .reg = S5P_CLK_DIV4, .shift = 12, .size = 4 },
- }, {
- .clk = {
- .name = "sclk_audio",
- .id = 1,
- .ctrlbit = (1 << 9),
- .enable = s5pc100_sclk1_ctrl,
-
- },
- .sources = &clk_src_group4,
- .reg_src = { .reg = S5P_CLK_SRC3, .shift = 16, .size = 3 },
- .reg_div = { .reg = S5P_CLK_DIV4, .shift = 16, .size = 4 },
- }, {
- .clk = {
- .name = "sclk_audio",
- .id = 2,
- .ctrlbit = (1 << 10),
- .enable = s5pc100_sclk1_ctrl,
-
- },
- .sources = &clk_src_group5,
- .reg_src = { .reg = S5P_CLK_SRC3, .shift = 20, .size = 3 },
- .reg_div = { .reg = S5P_CLK_DIV4, .shift = 20, .size = 4 },
}, {
.clk = {
.name = "sclk_lcd",
&clk_div_pclkd1,
&clk_div_cam,
&clk_div_hdmi,
+ &clk_sclk_audio0,
+ &clk_sclk_audio1,
+ &clk_sclk_audio2,
+ &clk_sclk_spdif,
};
void __init_or_cpufreq s5pc100_setup_clocks(void)
unsigned int ptr;
/* Set S5PC100 functions for clk_fout_epll */
- clk_fout_epll.enable = s5pc100_epll_enable;
+ clk_fout_epll.enable = s5p_epll_enable;
clk_fout_epll.ops = &s5pc100_epll_ops;
printk(KERN_DEBUG "%s: registering clocks\n", __func__);
/* configure GPIO for i2s port */
switch (pdev->id) {
case 1:
- s3c_gpio_cfgpin(S5PC100_GPC(0), S3C_GPIO_SFN(2));
- s3c_gpio_cfgpin(S5PC100_GPC(1), S3C_GPIO_SFN(2));
- s3c_gpio_cfgpin(S5PC100_GPC(2), S3C_GPIO_SFN(2));
- s3c_gpio_cfgpin(S5PC100_GPC(3), S3C_GPIO_SFN(2));
- s3c_gpio_cfgpin(S5PC100_GPC(4), S3C_GPIO_SFN(2));
+ s3c_gpio_cfgpin_range(S5PC100_GPC(0), 5, S3C_GPIO_SFN(2));
break;
case 2:
- s3c_gpio_cfgpin(S5PC100_GPG3(0), S3C_GPIO_SFN(4));
- s3c_gpio_cfgpin(S5PC100_GPG3(1), S3C_GPIO_SFN(4));
- s3c_gpio_cfgpin(S5PC100_GPG3(2), S3C_GPIO_SFN(4));
- s3c_gpio_cfgpin(S5PC100_GPG3(3), S3C_GPIO_SFN(4));
- s3c_gpio_cfgpin(S5PC100_GPG3(4), S3C_GPIO_SFN(4));
+ s3c_gpio_cfgpin_range(S5PC100_GPG3(0), 5, S3C_GPIO_SFN(4));
break;
case -1: /* Dedicated pins */
{
switch (pdev->id) {
case 0:
- s3c_gpio_cfgpin(S5PC100_GPG3(0), S3C_GPIO_SFN(5));
- s3c_gpio_cfgpin(S5PC100_GPG3(1), S3C_GPIO_SFN(5));
- s3c_gpio_cfgpin(S5PC100_GPG3(2), S3C_GPIO_SFN(5));
- s3c_gpio_cfgpin(S5PC100_GPG3(3), S3C_GPIO_SFN(5));
- s3c_gpio_cfgpin(S5PC100_GPG3(4), S3C_GPIO_SFN(5));
+ s3c_gpio_cfgpin_range(S5PC100_GPG3(0), 5, S3C_GPIO_SFN(5));
break;
case 1:
- s3c_gpio_cfgpin(S5PC100_GPC(0), S3C_GPIO_SFN(3));
- s3c_gpio_cfgpin(S5PC100_GPC(1), S3C_GPIO_SFN(3));
- s3c_gpio_cfgpin(S5PC100_GPC(2), S3C_GPIO_SFN(3));
- s3c_gpio_cfgpin(S5PC100_GPC(3), S3C_GPIO_SFN(3));
- s3c_gpio_cfgpin(S5PC100_GPC(4), S3C_GPIO_SFN(3));
+ s3c_gpio_cfgpin_range(S5PC100_GPC(0), 5, S3C_GPIO_SFN(3));
break;
default:
static int s5pc100_ac97_cfg_gpio(struct platform_device *pdev)
{
- s3c_gpio_cfgpin(S5PC100_GPC(0), S3C_GPIO_SFN(4));
- s3c_gpio_cfgpin(S5PC100_GPC(1), S3C_GPIO_SFN(4));
- s3c_gpio_cfgpin(S5PC100_GPC(2), S3C_GPIO_SFN(4));
- s3c_gpio_cfgpin(S5PC100_GPC(3), S3C_GPIO_SFN(4));
- s3c_gpio_cfgpin(S5PC100_GPC(4), S3C_GPIO_SFN(4));
-
- return 0;
+ return s3c_gpio_cfgpin_range(S5PC100_GPC(0), 5, S3C_GPIO_SFN(4));
}
static struct resource s5pc100_ac97_resource[] = {
.coherent_dma_mask = DMA_BIT_MASK(32),
},
};
+
+/* S/PDIF Controller platform_device */
+static int s5pc100_spdif_cfg_gpd(struct platform_device *pdev)
+{
+ s3c_gpio_cfgpin_range(S5PC100_GPD(5), 2, S3C_GPIO_SFN(3));
+
+ return 0;
+}
+
+static int s5pc100_spdif_cfg_gpg3(struct platform_device *pdev)
+{
+ s3c_gpio_cfgpin_range(S5PC100_GPG3(5), 2, S3C_GPIO_SFN(3));
+
+ return 0;
+}
+
+static struct resource s5pc100_spdif_resource[] = {
+ [0] = {
+ .start = S5PC100_PA_SPDIF,
+ .end = S5PC100_PA_SPDIF + 0x100 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = DMACH_SPDIF,
+ .end = DMACH_SPDIF,
+ .flags = IORESOURCE_DMA,
+ },
+};
+
+static struct s3c_audio_pdata s5p_spdif_pdata = {
+ .cfg_gpio = s5pc100_spdif_cfg_gpd,
+};
+
+static u64 s5pc100_spdif_dmamask = DMA_BIT_MASK(32);
+
+struct platform_device s5pc100_device_spdif = {
+ .name = "samsung-spdif",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(s5pc100_spdif_resource),
+ .resource = s5pc100_spdif_resource,
+ .dev = {
+ .platform_data = &s5p_spdif_pdata,
+ .dma_mask = &s5pc100_spdif_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+};
+
+void __init s5pc100_spdif_setup_gpio(int gpio)
+{
+ if (gpio == S5PC100_SPDIF_GPD)
+ s5p_spdif_pdata.cfg_gpio = s5pc100_spdif_cfg_gpd;
+ else
+ s5p_spdif_pdata.cfg_gpio = s5pc100_spdif_cfg_gpg3;
+}
{
switch (pdev->id) {
case 0:
- s3c_gpio_cfgpin(S5PC100_GPB(0), S3C_GPIO_SFN(2));
- s3c_gpio_cfgpin(S5PC100_GPB(1), S3C_GPIO_SFN(2));
- s3c_gpio_cfgpin(S5PC100_GPB(2), S3C_GPIO_SFN(2));
- s3c_gpio_setpull(S5PC100_GPB(0), S3C_GPIO_PULL_UP);
- s3c_gpio_setpull(S5PC100_GPB(1), S3C_GPIO_PULL_UP);
- s3c_gpio_setpull(S5PC100_GPB(2), S3C_GPIO_PULL_UP);
+ s3c_gpio_cfgall_range(S5PC100_GPB(0), 3,
+ S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
break;
case 1:
- s3c_gpio_cfgpin(S5PC100_GPB(4), S3C_GPIO_SFN(2));
- s3c_gpio_cfgpin(S5PC100_GPB(5), S3C_GPIO_SFN(2));
- s3c_gpio_cfgpin(S5PC100_GPB(6), S3C_GPIO_SFN(2));
- s3c_gpio_setpull(S5PC100_GPB(4), S3C_GPIO_PULL_UP);
- s3c_gpio_setpull(S5PC100_GPB(5), S3C_GPIO_PULL_UP);
- s3c_gpio_setpull(S5PC100_GPB(6), S3C_GPIO_PULL_UP);
+ s3c_gpio_cfgall_range(S5PC100_GPB(4), 3,
+ S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
break;
case 2:
s3c_gpio_cfgpin(S5PC100_GPG3(0), S3C_GPIO_SFN(3));
- s3c_gpio_cfgpin(S5PC100_GPG3(2), S3C_GPIO_SFN(3));
- s3c_gpio_cfgpin(S5PC100_GPG3(3), S3C_GPIO_SFN(3));
s3c_gpio_setpull(S5PC100_GPG3(0), S3C_GPIO_PULL_UP);
- s3c_gpio_setpull(S5PC100_GPG3(2), S3C_GPIO_PULL_UP);
- s3c_gpio_setpull(S5PC100_GPG3(3), S3C_GPIO_PULL_UP);
+ s3c_gpio_cfgall_range(S5PC100_GPB(2), 2,
+ S3C_GPIO_SFN(3), S3C_GPIO_PULL_UP);
break;
default:
static struct platform_device s5pc100_device_pdma0 = {
.name = "s3c-pl330",
- .id = 1,
+ .id = 0,
.num_resources = ARRAY_SIZE(s5pc100_pdma0_resource),
.resource = s5pc100_pdma0_resource,
.dev = {
static struct platform_device s5pc100_device_pdma1 = {
.name = "s3c-pl330",
- .id = 2,
+ .id = 1,
.num_resources = ARRAY_SIZE(s5pc100_pdma1_resource),
.resource = s5pc100_pdma1_resource,
.dev = {
-/*
- * arch/arm/plat-s5pc100/gpiolib.c
+/* linux/arch/arm/mach-s5pc100/gpiolib.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
*
* Copyright 2009 Samsung Electronics Co
* Kyungmin Park <kyungmin.park@samsung.com>
* L3 8 4Bit None
*/
-static int s5pc100_gpiolib_to_irq(struct gpio_chip *chip, unsigned int offset)
-{
- return S3C_IRQ_GPIO(chip->base + offset);
-}
-
-static int s5pc100_gpiolib_to_eint(struct gpio_chip *chip, unsigned int offset)
-{
- int base;
-
- base = chip->base - S5PC100_GPH0(0);
- if (base == 0)
- return IRQ_EINT(offset);
- base = chip->base - S5PC100_GPH1(0);
- if (base == 0)
- return IRQ_EINT(8 + offset);
- base = chip->base - S5PC100_GPH2(0);
- if (base == 0)
- return IRQ_EINT(16 + offset);
- base = chip->base - S5PC100_GPH3(0);
- if (base == 0)
- return IRQ_EINT(24 + offset);
- return -EINVAL;
-}
-
static struct s3c_gpio_cfg gpio_cfg = {
.set_config = s3c_gpio_setcfg_s3c64xx_4bit,
.set_pull = s3c_gpio_setpull_updown,
.get_pull = s3c_gpio_getpull_updown,
};
+/*
+ * GPIO bank's base address given the index of the bank in the
+ * list of all gpio banks.
+ */
+#define S5PC100_BANK_BASE(bank_nr) (S5P_VA_GPIO + ((bank_nr) * 0x20))
+
+/*
+ * Following are the gpio banks in S5PC100.
+ *
+ * The 'config' member when left to NULL, is initialized to the default
+ * structure gpio_cfg in the init function below.
+ *
+ * The 'base' member is also initialized in the init function below.
+ * Note: The initialization of 'base' member of s3c_gpio_chip structure
+ * uses the above macro and depends on the banks being listed in order here.
+ */
static struct s3c_gpio_chip s5pc100_gpio_chips[] = {
{
- .base = S5PC100_GPA0_BASE,
- .config = &gpio_cfg,
.chip = {
.base = S5PC100_GPA0(0),
.ngpio = S5PC100_GPIO_A0_NR,
.label = "GPA0",
},
}, {
- .base = S5PC100_GPA1_BASE,
- .config = &gpio_cfg,
.chip = {
.base = S5PC100_GPA1(0),
.ngpio = S5PC100_GPIO_A1_NR,
.label = "GPA1",
},
}, {
- .base = S5PC100_GPB_BASE,
- .config = &gpio_cfg,
.chip = {
.base = S5PC100_GPB(0),
.ngpio = S5PC100_GPIO_B_NR,
.label = "GPB",
},
}, {
- .base = S5PC100_GPC_BASE,
- .config = &gpio_cfg,
.chip = {
.base = S5PC100_GPC(0),
.ngpio = S5PC100_GPIO_C_NR,
.label = "GPC",
},
}, {
- .base = S5PC100_GPD_BASE,
- .config = &gpio_cfg,
.chip = {
.base = S5PC100_GPD(0),
.ngpio = S5PC100_GPIO_D_NR,
.label = "GPD",
},
}, {
- .base = S5PC100_GPE0_BASE,
- .config = &gpio_cfg,
.chip = {
.base = S5PC100_GPE0(0),
.ngpio = S5PC100_GPIO_E0_NR,
.label = "GPE0",
},
}, {
- .base = S5PC100_GPE1_BASE,
- .config = &gpio_cfg,
.chip = {
.base = S5PC100_GPE1(0),
.ngpio = S5PC100_GPIO_E1_NR,
.label = "GPE1",
},
}, {
- .base = S5PC100_GPF0_BASE,
- .config = &gpio_cfg,
.chip = {
.base = S5PC100_GPF0(0),
.ngpio = S5PC100_GPIO_F0_NR,
.label = "GPF0",
},
}, {
- .base = S5PC100_GPF1_BASE,
- .config = &gpio_cfg,
.chip = {
.base = S5PC100_GPF1(0),
.ngpio = S5PC100_GPIO_F1_NR,
.label = "GPF1",
},
}, {
- .base = S5PC100_GPF2_BASE,
- .config = &gpio_cfg,
.chip = {
.base = S5PC100_GPF2(0),
.ngpio = S5PC100_GPIO_F2_NR,
.label = "GPF2",
},
}, {
- .base = S5PC100_GPF3_BASE,
- .config = &gpio_cfg,
.chip = {
.base = S5PC100_GPF3(0),
.ngpio = S5PC100_GPIO_F3_NR,
.label = "GPF3",
},
}, {
- .base = S5PC100_GPG0_BASE,
- .config = &gpio_cfg,
.chip = {
.base = S5PC100_GPG0(0),
.ngpio = S5PC100_GPIO_G0_NR,
.label = "GPG0",
},
}, {
- .base = S5PC100_GPG1_BASE,
- .config = &gpio_cfg,
.chip = {
.base = S5PC100_GPG1(0),
.ngpio = S5PC100_GPIO_G1_NR,
.label = "GPG1",
},
}, {
- .base = S5PC100_GPG2_BASE,
- .config = &gpio_cfg,
.chip = {
.base = S5PC100_GPG2(0),
.ngpio = S5PC100_GPIO_G2_NR,
.label = "GPG2",
},
}, {
- .base = S5PC100_GPG3_BASE,
- .config = &gpio_cfg,
.chip = {
.base = S5PC100_GPG3(0),
.ngpio = S5PC100_GPIO_G3_NR,
.label = "GPG3",
},
}, {
- .base = S5PC100_GPH0_BASE,
- .config = &gpio_cfg_eint,
- .chip = {
- .base = S5PC100_GPH0(0),
- .ngpio = S5PC100_GPIO_H0_NR,
- .label = "GPH0",
- },
- }, {
- .base = S5PC100_GPH1_BASE,
- .config = &gpio_cfg_eint,
- .chip = {
- .base = S5PC100_GPH1(0),
- .ngpio = S5PC100_GPIO_H1_NR,
- .label = "GPH1",
- },
- }, {
- .base = S5PC100_GPH2_BASE,
- .config = &gpio_cfg_eint,
- .chip = {
- .base = S5PC100_GPH2(0),
- .ngpio = S5PC100_GPIO_H2_NR,
- .label = "GPH2",
- },
- }, {
- .base = S5PC100_GPH3_BASE,
- .config = &gpio_cfg_eint,
- .chip = {
- .base = S5PC100_GPH3(0),
- .ngpio = S5PC100_GPIO_H3_NR,
- .label = "GPH3",
- },
- }, {
- .base = S5PC100_GPI_BASE,
- .config = &gpio_cfg,
.chip = {
.base = S5PC100_GPI(0),
.ngpio = S5PC100_GPIO_I_NR,
.label = "GPI",
},
}, {
- .base = S5PC100_GPJ0_BASE,
- .config = &gpio_cfg,
.chip = {
.base = S5PC100_GPJ0(0),
.ngpio = S5PC100_GPIO_J0_NR,
.label = "GPJ0",
},
}, {
- .base = S5PC100_GPJ1_BASE,
- .config = &gpio_cfg,
.chip = {
.base = S5PC100_GPJ1(0),
.ngpio = S5PC100_GPIO_J1_NR,
.label = "GPJ1",
},
}, {
- .base = S5PC100_GPJ2_BASE,
- .config = &gpio_cfg,
.chip = {
.base = S5PC100_GPJ2(0),
.ngpio = S5PC100_GPIO_J2_NR,
.label = "GPJ2",
},
}, {
- .base = S5PC100_GPJ3_BASE,
- .config = &gpio_cfg,
.chip = {
.base = S5PC100_GPJ3(0),
.ngpio = S5PC100_GPIO_J3_NR,
.label = "GPJ3",
},
}, {
- .base = S5PC100_GPJ4_BASE,
- .config = &gpio_cfg,
.chip = {
.base = S5PC100_GPJ4(0),
.ngpio = S5PC100_GPIO_J4_NR,
.label = "GPJ4",
},
}, {
- .base = S5PC100_GPK0_BASE,
.config = &gpio_cfg_noint,
.chip = {
.base = S5PC100_GPK0(0),
.label = "GPK0",
},
}, {
- .base = S5PC100_GPK1_BASE,
.config = &gpio_cfg_noint,
.chip = {
.base = S5PC100_GPK1(0),
.label = "GPK1",
},
}, {
- .base = S5PC100_GPK2_BASE,
.config = &gpio_cfg_noint,
.chip = {
.base = S5PC100_GPK2(0),
.label = "GPK2",
},
}, {
- .base = S5PC100_GPK3_BASE,
.config = &gpio_cfg_noint,
.chip = {
.base = S5PC100_GPK3(0),
.label = "GPK3",
},
}, {
- .base = S5PC100_GPL0_BASE,
.config = &gpio_cfg_noint,
.chip = {
.base = S5PC100_GPL0(0),
.label = "GPL0",
},
}, {
- .base = S5PC100_GPL1_BASE,
.config = &gpio_cfg_noint,
.chip = {
.base = S5PC100_GPL1(0),
.label = "GPL1",
},
}, {
- .base = S5PC100_GPL2_BASE,
.config = &gpio_cfg_noint,
.chip = {
.base = S5PC100_GPL2(0),
.label = "GPL2",
},
}, {
- .base = S5PC100_GPL3_BASE,
.config = &gpio_cfg_noint,
.chip = {
.base = S5PC100_GPL3(0),
.label = "GPL3",
},
}, {
- .base = S5PC100_GPL4_BASE,
.config = &gpio_cfg_noint,
.chip = {
.base = S5PC100_GPL4(0),
.ngpio = S5PC100_GPIO_L4_NR,
.label = "GPL4",
},
+ }, {
+ .base = (S5P_VA_GPIO + 0xC00),
+ .config = &gpio_cfg_eint,
+ .irq_base = IRQ_EINT(0),
+ .chip = {
+ .base = S5PC100_GPH0(0),
+ .ngpio = S5PC100_GPIO_H0_NR,
+ .label = "GPH0",
+ .to_irq = samsung_gpiolib_to_irq,
+ },
+ }, {
+ .base = (S5P_VA_GPIO + 0xC20),
+ .config = &gpio_cfg_eint,
+ .irq_base = IRQ_EINT(8),
+ .chip = {
+ .base = S5PC100_GPH1(0),
+ .ngpio = S5PC100_GPIO_H1_NR,
+ .label = "GPH1",
+ .to_irq = samsung_gpiolib_to_irq,
+ },
+ }, {
+ .base = (S5P_VA_GPIO + 0xC40),
+ .config = &gpio_cfg_eint,
+ .irq_base = IRQ_EINT(16),
+ .chip = {
+ .base = S5PC100_GPH2(0),
+ .ngpio = S5PC100_GPIO_H2_NR,
+ .label = "GPH2",
+ .to_irq = samsung_gpiolib_to_irq,
+ },
+ }, {
+ .base = (S5P_VA_GPIO + 0xC60),
+ .config = &gpio_cfg_eint,
+ .irq_base = IRQ_EINT(24),
+ .chip = {
+ .base = S5PC100_GPH3(0),
+ .ngpio = S5PC100_GPIO_H3_NR,
+ .label = "GPH3",
+ .to_irq = samsung_gpiolib_to_irq,
+ },
},
};
-/* FIXME move from irq-gpio.c */
-extern struct irq_chip s5pc100_gpioint;
-extern void s5pc100_irq_gpioint_handler(unsigned int irq, struct irq_desc *desc);
-
-static __init void s5pc100_gpiolib_link(struct s3c_gpio_chip *chip)
+static __init int s5pc100_gpiolib_init(void)
{
- /* Interrupt */
- if (chip->config == &gpio_cfg) {
- int i, irq;
-
- chip->chip.to_irq = s5pc100_gpiolib_to_irq;
+ struct s3c_gpio_chip *chip = s5pc100_gpio_chips;
+ int nr_chips = ARRAY_SIZE(s5pc100_gpio_chips);
+ int gpioint_group = 0;
+ int i;
- for (i = 0; i < chip->chip.ngpio; i++) {
- irq = S3C_IRQ_GPIO_BASE + chip->chip.base + i;
- set_irq_chip(irq, &s5pc100_gpioint);
- set_irq_data(irq, &chip->chip);
- set_irq_handler(irq, handle_level_irq);
- set_irq_flags(irq, IRQF_VALID);
+ for (i = 0; i < nr_chips; i++, chip++) {
+ if (chip->config == NULL) {
+ chip->config = &gpio_cfg;
+ chip->group = gpioint_group++;
}
- } else if (chip->config == &gpio_cfg_eint) {
- chip->chip.to_irq = s5pc100_gpiolib_to_eint;
+ if (chip->base == NULL)
+ chip->base = S5PC100_BANK_BASE(i);
}
-}
-
-static __init int s5pc100_gpiolib_init(void)
-{
- struct s3c_gpio_chip *chip;
- int nr_chips;
-
- chip = s5pc100_gpio_chips;
- nr_chips = ARRAY_SIZE(s5pc100_gpio_chips);
-
- for (; nr_chips > 0; nr_chips--, chip++)
- s5pc100_gpiolib_link(chip);
-
- samsung_gpiolib_add_4bit_chips(s5pc100_gpio_chips,
- ARRAY_SIZE(s5pc100_gpio_chips));
- /* Interrupt */
- set_irq_chained_handler(IRQ_GPIOINT, s5pc100_irq_gpioint_handler);
+ samsung_gpiolib_add_4bit_chips(s5pc100_gpio_chips, nr_chips);
return 0;
}
/* define the number of gpios we need to the one after the MP04() range */
#define ARCH_NR_GPIOS (S5PC100_GPIO_END + 1)
-#define EINT_MODE S3C_GPIO_SFN(0x2)
-
-#define EINT_GPIO_0(x) S5PC100_GPH0(x)
-#define EINT_GPIO_1(x) S5PC100_GPH1(x)
-#define EINT_GPIO_2(x) S5PC100_GPH2(x)
-#define EINT_GPIO_3(x) S5PC100_GPH3(x)
-
#include <asm-generic/gpio.h>
#endif /* __ASM_ARCH_GPIO_H */
#define IRQ_SPI1 S5P_IRQ_VIC1(16)
#define IRQ_SPI2 S5P_IRQ_VIC1(17)
#define IRQ_IRDA S5P_IRQ_VIC1(18)
-#define IRQ_CAN0 S5P_IRQ_VIC1(19)
-#define IRQ_CAN1 S5P_IRQ_VIC1(20)
+#define IRQ_IIC2 S5P_IRQ_VIC1(19)
+#define IRQ_IIC3 S5P_IRQ_VIC1(20)
#define IRQ_HSIRX S5P_IRQ_VIC1(21)
#define IRQ_HSITX S5P_IRQ_VIC1(22)
#define IRQ_UHOST S5P_IRQ_VIC1(23)
#define S5P_EINT_BASE1 (S5P_IRQ_VIC0(0))
#define S5P_EINT_BASE2 (IRQ_VIC_END + 1)
-#define S3C_IRQ_GPIO_BASE (IRQ_EINT(31) + 1)
-#define S3C_IRQ_GPIO(x) (S3C_IRQ_GPIO_BASE + (x))
+/* GPIO interrupt */
+#define S5P_GPIOINT_BASE (IRQ_EINT(31) + 1)
+#define S5P_GPIOINT_GROUP_MAXNR 21
-/* Until MP04 Groups -> 40 (exactly 39) Groups * 8 ~= 320 GPIOs */
-#define NR_IRQS (S3C_IRQ_GPIO(320) + 1)
+/* Set the default NR_IRQS */
+#define NR_IRQS (IRQ_EINT(31) + S5P_GPIOINT_COUNT + 1)
/* Compatibility */
#define IRQ_LCD_FIFO IRQ_LCD0
#define S5PC100_PA_PCM0 0xF2400000
#define S5PC100_PA_PCM1 0xF2500000
+#define S5PC100_PA_SPDIF 0xF2600000
+
#define S5PC100_PA_TSADC (0xF3000000)
/* KEYPAD */
#include <mach/map.h>
-/* S5PC100 */
-#define S5PC100_GPIO_BASE S5P_VA_GPIO
-#define S5PC100_GPA0_BASE (S5PC100_GPIO_BASE + 0x0000)
-#define S5PC100_GPA1_BASE (S5PC100_GPIO_BASE + 0x0020)
-#define S5PC100_GPB_BASE (S5PC100_GPIO_BASE + 0x0040)
-#define S5PC100_GPC_BASE (S5PC100_GPIO_BASE + 0x0060)
-#define S5PC100_GPD_BASE (S5PC100_GPIO_BASE + 0x0080)
-#define S5PC100_GPE0_BASE (S5PC100_GPIO_BASE + 0x00A0)
-#define S5PC100_GPE1_BASE (S5PC100_GPIO_BASE + 0x00C0)
-#define S5PC100_GPF0_BASE (S5PC100_GPIO_BASE + 0x00E0)
-#define S5PC100_GPF1_BASE (S5PC100_GPIO_BASE + 0x0100)
-#define S5PC100_GPF2_BASE (S5PC100_GPIO_BASE + 0x0120)
-#define S5PC100_GPF3_BASE (S5PC100_GPIO_BASE + 0x0140)
-#define S5PC100_GPG0_BASE (S5PC100_GPIO_BASE + 0x0160)
-#define S5PC100_GPG1_BASE (S5PC100_GPIO_BASE + 0x0180)
-#define S5PC100_GPG2_BASE (S5PC100_GPIO_BASE + 0x01A0)
-#define S5PC100_GPG3_BASE (S5PC100_GPIO_BASE + 0x01C0)
-#define S5PC100_GPH0_BASE (S5PC100_GPIO_BASE + 0x0C00)
-#define S5PC100_GPH1_BASE (S5PC100_GPIO_BASE + 0x0C20)
-#define S5PC100_GPH2_BASE (S5PC100_GPIO_BASE + 0x0C40)
-#define S5PC100_GPH3_BASE (S5PC100_GPIO_BASE + 0x0C60)
-#define S5PC100_GPI_BASE (S5PC100_GPIO_BASE + 0x01E0)
-#define S5PC100_GPJ0_BASE (S5PC100_GPIO_BASE + 0x0200)
-#define S5PC100_GPJ1_BASE (S5PC100_GPIO_BASE + 0x0220)
-#define S5PC100_GPJ2_BASE (S5PC100_GPIO_BASE + 0x0240)
-#define S5PC100_GPJ3_BASE (S5PC100_GPIO_BASE + 0x0260)
-#define S5PC100_GPJ4_BASE (S5PC100_GPIO_BASE + 0x0280)
-#define S5PC100_GPK0_BASE (S5PC100_GPIO_BASE + 0x02A0)
-#define S5PC100_GPK1_BASE (S5PC100_GPIO_BASE + 0x02C0)
-#define S5PC100_GPK2_BASE (S5PC100_GPIO_BASE + 0x02E0)
-#define S5PC100_GPK3_BASE (S5PC100_GPIO_BASE + 0x0300)
-#define S5PC100_GPL0_BASE (S5PC100_GPIO_BASE + 0x0320)
-#define S5PC100_GPL1_BASE (S5PC100_GPIO_BASE + 0x0340)
-#define S5PC100_GPL2_BASE (S5PC100_GPIO_BASE + 0x0360)
-#define S5PC100_GPL3_BASE (S5PC100_GPIO_BASE + 0x0380)
-#define S5PC100_GPL4_BASE (S5PC100_GPIO_BASE + 0x03A0)
-
#define S5PC100EINT30CON (S5P_VA_GPIO + 0xE00)
#define S5P_EINT_CON(x) (S5PC100EINT30CON + ((x) * 0x4))
#define eint_irq_to_bit(irq) (1 << (EINT_OFFSET(irq) & 0x7))
-/* values for S5P_EXTINT0 */
-#define S5P_EXTINT_LOWLEV (0x00)
-#define S5P_EXTINT_HILEV (0x01)
-#define S5P_EXTINT_FALLEDGE (0x02)
-#define S5P_EXTINT_RISEEDGE (0x03)
-#define S5P_EXTINT_BOTHEDGE (0x04)
+#define EINT_MODE S3C_GPIO_SFN(0x2)
+
+#define EINT_GPIO_0(x) S5PC100_GPH0(x)
+#define EINT_GPIO_1(x) S5PC100_GPH1(x)
+#define EINT_GPIO_2(x) S5PC100_GPH2(x)
+#define EINT_GPIO_3(x) S5PC100_GPH3(x)
#endif /* __ASM_MACH_S5PC100_REGS_GPIO_H */
#ifndef __ASM_ARCH_VMALLOC_H
#define __ASM_ARCH_VMALLOC_H
-#define VMALLOC_END (0xe0000000UL)
+#define VMALLOC_END 0xF6000000UL
#endif /* __ASM_ARCH_VMALLOC_H */
+++ /dev/null
-/*
- * arch/arm/mach-s5pc100/irq-gpio.c
- *
- * Copyright (C) 2009 Samsung Electronics
- *
- * S5PC100 - Interrupt handling for IRQ_GPIO${group}(x)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-
-#include <mach/map.h>
-#include <plat/gpio-cfg.h>
-
-#define S5P_GPIOREG(x) (S5P_VA_GPIO + (x))
-
-#define CON_OFFSET 0x700
-#define MASK_OFFSET 0x900
-#define PEND_OFFSET 0xA00
-#define CON_OFFSET_2 0xE00
-#define MASK_OFFSET_2 0xF00
-#define PEND_OFFSET_2 0xF40
-
-#define GPIOINT_LEVEL_LOW 0x0
-#define GPIOINT_LEVEL_HIGH 0x1
-#define GPIOINT_EDGE_FALLING 0x2
-#define GPIOINT_EDGE_RISING 0x3
-#define GPIOINT_EDGE_BOTH 0x4
-
-static int group_to_con_offset(int group)
-{
- return group << 2;
-}
-
-static int group_to_mask_offset(int group)
-{
- return group << 2;
-}
-
-static int group_to_pend_offset(int group)
-{
- return group << 2;
-}
-
-static int s5pc100_get_start(unsigned int group)
-{
- switch (group) {
- case 0: return S5PC100_GPIO_A0_START;
- case 1: return S5PC100_GPIO_A1_START;
- case 2: return S5PC100_GPIO_B_START;
- case 3: return S5PC100_GPIO_C_START;
- case 4: return S5PC100_GPIO_D_START;
- case 5: return S5PC100_GPIO_E0_START;
- case 6: return S5PC100_GPIO_E1_START;
- case 7: return S5PC100_GPIO_F0_START;
- case 8: return S5PC100_GPIO_F1_START;
- case 9: return S5PC100_GPIO_F2_START;
- case 10: return S5PC100_GPIO_F3_START;
- case 11: return S5PC100_GPIO_G0_START;
- case 12: return S5PC100_GPIO_G1_START;
- case 13: return S5PC100_GPIO_G2_START;
- case 14: return S5PC100_GPIO_G3_START;
- case 15: return S5PC100_GPIO_I_START;
- case 16: return S5PC100_GPIO_J0_START;
- case 17: return S5PC100_GPIO_J1_START;
- case 18: return S5PC100_GPIO_J2_START;
- case 19: return S5PC100_GPIO_J3_START;
- case 20: return S5PC100_GPIO_J4_START;
- default:
- BUG();
- }
-
- return -EINVAL;
-}
-
-static int s5pc100_get_group(unsigned int irq)
-{
- irq -= S3C_IRQ_GPIO(0);
-
- switch (irq) {
- case S5PC100_GPIO_A0_START ... S5PC100_GPIO_A1_START - 1:
- return 0;
- case S5PC100_GPIO_A1_START ... S5PC100_GPIO_B_START - 1:
- return 1;
- case S5PC100_GPIO_B_START ... S5PC100_GPIO_C_START - 1:
- return 2;
- case S5PC100_GPIO_C_START ... S5PC100_GPIO_D_START - 1:
- return 3;
- case S5PC100_GPIO_D_START ... S5PC100_GPIO_E0_START - 1:
- return 4;
- case S5PC100_GPIO_E0_START ... S5PC100_GPIO_E1_START - 1:
- return 5;
- case S5PC100_GPIO_E1_START ... S5PC100_GPIO_F0_START - 1:
- return 6;
- case S5PC100_GPIO_F0_START ... S5PC100_GPIO_F1_START - 1:
- return 7;
- case S5PC100_GPIO_F1_START ... S5PC100_GPIO_F2_START - 1:
- return 8;
- case S5PC100_GPIO_F2_START ... S5PC100_GPIO_F3_START - 1:
- return 9;
- case S5PC100_GPIO_F3_START ... S5PC100_GPIO_G0_START - 1:
- return 10;
- case S5PC100_GPIO_G0_START ... S5PC100_GPIO_G1_START - 1:
- return 11;
- case S5PC100_GPIO_G1_START ... S5PC100_GPIO_G2_START - 1:
- return 12;
- case S5PC100_GPIO_G2_START ... S5PC100_GPIO_G3_START - 1:
- return 13;
- case S5PC100_GPIO_G3_START ... S5PC100_GPIO_H0_START - 1:
- return 14;
- case S5PC100_GPIO_I_START ... S5PC100_GPIO_J0_START - 1:
- return 15;
- case S5PC100_GPIO_J0_START ... S5PC100_GPIO_J1_START - 1:
- return 16;
- case S5PC100_GPIO_J1_START ... S5PC100_GPIO_J2_START - 1:
- return 17;
- case S5PC100_GPIO_J2_START ... S5PC100_GPIO_J3_START - 1:
- return 18;
- case S5PC100_GPIO_J3_START ... S5PC100_GPIO_J4_START - 1:
- return 19;
- case S5PC100_GPIO_J4_START ... S5PC100_GPIO_K0_START - 1:
- return 20;
- default:
- BUG();
- }
-
- return -EINVAL;
-}
-
-static int s5pc100_get_offset(unsigned int irq)
-{
- struct gpio_chip *chip = get_irq_data(irq);
- return irq - S3C_IRQ_GPIO(chip->base);
-}
-
-static void s5pc100_gpioint_ack(unsigned int irq)
-{
- int group, offset, pend_offset;
- unsigned int value;
-
- group = s5pc100_get_group(irq);
- offset = s5pc100_get_offset(irq);
- pend_offset = group_to_pend_offset(group);
-
- value = __raw_readl(S5P_GPIOREG(PEND_OFFSET) + pend_offset);
- value |= 1 << offset;
- __raw_writel(value, S5P_GPIOREG(PEND_OFFSET) + pend_offset);
-}
-
-static void s5pc100_gpioint_mask(unsigned int irq)
-{
- int group, offset, mask_offset;
- unsigned int value;
-
- group = s5pc100_get_group(irq);
- offset = s5pc100_get_offset(irq);
- mask_offset = group_to_mask_offset(group);
-
- value = __raw_readl(S5P_GPIOREG(MASK_OFFSET) + mask_offset);
- value |= 1 << offset;
- __raw_writel(value, S5P_GPIOREG(MASK_OFFSET) + mask_offset);
-}
-
-static void s5pc100_gpioint_unmask(unsigned int irq)
-{
- int group, offset, mask_offset;
- unsigned int value;
-
- group = s5pc100_get_group(irq);
- offset = s5pc100_get_offset(irq);
- mask_offset = group_to_mask_offset(group);
-
- value = __raw_readl(S5P_GPIOREG(MASK_OFFSET) + mask_offset);
- value &= ~(1 << offset);
- __raw_writel(value, S5P_GPIOREG(MASK_OFFSET) + mask_offset);
-}
-
-static void s5pc100_gpioint_mask_ack(unsigned int irq)
-{
- s5pc100_gpioint_mask(irq);
- s5pc100_gpioint_ack(irq);
-}
-
-static int s5pc100_gpioint_set_type(unsigned int irq, unsigned int type)
-{
- int group, offset, con_offset;
- unsigned int value;
-
- group = s5pc100_get_group(irq);
- offset = s5pc100_get_offset(irq);
- con_offset = group_to_con_offset(group);
-
- switch (type) {
- case IRQ_TYPE_NONE:
- printk(KERN_WARNING "No irq type\n");
- return -EINVAL;
- case IRQ_TYPE_EDGE_RISING:
- type = GPIOINT_EDGE_RISING;
- break;
- case IRQ_TYPE_EDGE_FALLING:
- type = GPIOINT_EDGE_FALLING;
- break;
- case IRQ_TYPE_EDGE_BOTH:
- type = GPIOINT_EDGE_BOTH;
- break;
- case IRQ_TYPE_LEVEL_HIGH:
- type = GPIOINT_LEVEL_HIGH;
- break;
- case IRQ_TYPE_LEVEL_LOW:
- type = GPIOINT_LEVEL_LOW;
- break;
- default:
- BUG();
- }
-
-
- value = __raw_readl(S5P_GPIOREG(CON_OFFSET) + con_offset);
- value &= ~(0xf << (offset * 0x4));
- value |= (type << (offset * 0x4));
- __raw_writel(value, S5P_GPIOREG(CON_OFFSET) + con_offset);
-
- return 0;
-}
-
-struct irq_chip s5pc100_gpioint = {
- .name = "GPIO",
- .ack = s5pc100_gpioint_ack,
- .mask = s5pc100_gpioint_mask,
- .mask_ack = s5pc100_gpioint_mask_ack,
- .unmask = s5pc100_gpioint_unmask,
- .set_type = s5pc100_gpioint_set_type,
-};
-
-void s5pc100_irq_gpioint_handler(unsigned int irq, struct irq_desc *desc)
-{
- int group, offset, pend_offset, mask_offset;
- int real_irq, group_end;
- unsigned int pend, mask;
-
- group_end = 21;
-
- for (group = 0; group < group_end; group++) {
- pend_offset = group_to_pend_offset(group);
- pend = __raw_readl(S5P_GPIOREG(PEND_OFFSET) + pend_offset);
- if (!pend)
- continue;
-
- mask_offset = group_to_mask_offset(group);
- mask = __raw_readl(S5P_GPIOREG(MASK_OFFSET) + mask_offset);
- pend &= ~mask;
-
- for (offset = 0; offset < 8; offset++) {
- if (pend & (1 << offset)) {
- real_irq = s5pc100_get_start(group) + offset;
- generic_handle_irq(S3C_IRQ_GPIO(real_irq));
- }
- }
- }
-}
#include <plat/adc.h>
#include <plat/keypad.h>
#include <plat/ts.h>
+#include <plat/audio.h>
/* Following are default values for UCON, ULCON and UFCON UART registers */
#define SMDKC100_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
&s5p_device_fimc0,
&s5p_device_fimc1,
&s5p_device_fimc2,
+ &s5pc100_device_spdif,
};
static struct s3c2410_ts_mach_info s3c_ts_platform __initdata = {
samsung_keypad_set_platdata(&smdkc100_keypad_data);
+ s5pc100_spdif_setup_gpio(S5PC100_SPDIF_GPD);
+
/* LCD init */
gpio_request(S5PC100_GPD(0), "GPD");
gpio_request(S5PC100_GPH0(6), "GPH0");
#define DISR_OFFSET 0x7008
-void s5pc100_fb_gpio_setup_24bpp(void)
+static void s5pc100_fb_setgpios(unsigned int base, unsigned int nr)
{
- unsigned int gpio = 0;
-
- for (gpio = S5PC100_GPF0(0); gpio <= S5PC100_GPF0(7); gpio++) {
- s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
- s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
- }
-
- for (gpio = S5PC100_GPF1(0); gpio <= S5PC100_GPF1(7); gpio++) {
- s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
- s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
- }
-
- for (gpio = S5PC100_GPF2(0); gpio <= S5PC100_GPF2(7); gpio++) {
- s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
- s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
- }
+ s3c_gpio_cfgrange_nopull(base, nr, S3C_GPIO_SFN(2));
+}
- for (gpio = S5PC100_GPF3(0); gpio <= S5PC100_GPF3(3); gpio++) {
- s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
- s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
- }
+void s5pc100_fb_gpio_setup_24bpp(void)
+{
+ s5pc100_fb_setgpios(S5PC100_GPF0(0), 8);
+ s5pc100_fb_setgpios(S5PC100_GPF1(0), 8);
+ s5pc100_fb_setgpios(S5PC100_GPF2(0), 8);
+ s5pc100_fb_setgpios(S5PC100_GPF3(0), 4);
}
void s3c_i2c0_cfg_gpio(struct platform_device *dev)
{
- s3c_gpio_cfgpin(S5PC100_GPD(3), S3C_GPIO_SFN(2));
- s3c_gpio_setpull(S5PC100_GPD(3), S3C_GPIO_PULL_UP);
- s3c_gpio_cfgpin(S5PC100_GPD(4), S3C_GPIO_SFN(2));
- s3c_gpio_setpull(S5PC100_GPD(4), S3C_GPIO_PULL_UP);
+ s3c_gpio_cfgall_range(S5PC100_GPD(3), 2,
+ S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
}
void s3c_i2c1_cfg_gpio(struct platform_device *dev)
{
- s3c_gpio_cfgpin(S5PC100_GPD(5), S3C_GPIO_SFN(2));
- s3c_gpio_setpull(S5PC100_GPD(5), S3C_GPIO_PULL_UP);
- s3c_gpio_cfgpin(S5PC100_GPD(6), S3C_GPIO_SFN(2));
- s3c_gpio_setpull(S5PC100_GPD(6), S3C_GPIO_PULL_UP);
+ s3c_gpio_cfgall_range(S5PC100_GPD(5), 2,
+ S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
}
#include <mach/regs-clock.h>
#include <plat/gpio-cfg.h>
+static void s5pc100_ide_cfg_gpios(unsigned int base, unsigned int nr)
+{
+ s3c_gpio_cfgrange_nopull(base, nr, S3C_GPIO_SFN(4));
+
+ for (; nr > 0; nr--, base++)
+ s5p_gpio_set_drvstr(base, S5P_GPIO_DRVSTR_LV4);
+}
+
void s5pc100_ide_setup_gpio(void)
{
u32 reg;
- u32 gpio = 0;
/* Independent CF interface, CF chip select configuration */
reg = readl(S5PC100_MEM_SYS_CFG) & (~0x3f);
writel(reg | MEM_SYS_CFG_EBI_FIX_PRI_CFCON, S5PC100_MEM_SYS_CFG);
/* CF_Add[0 - 2], CF_IORDY, CF_INTRQ, CF_DMARQ, CF_DMARST, CF_DMACK */
- for (gpio = S5PC100_GPJ0(0); gpio <= S5PC100_GPJ0(7); gpio++) {
- s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(4));
- s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
- s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
- }
+ s5pc100_ide_cfg_gpios(S5PC100_GPJ0(0), 8);
/*CF_Data[0 - 7] */
- for (gpio = S5PC100_GPJ2(0); gpio <= S5PC100_GPJ2(7); gpio++) {
- s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(4));
- s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
- s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
- }
+ s5pc100_ide_cfg_gpios(S5PC100_GPJ2(0), 8);
/* CF_Data[8 - 15] */
- for (gpio = S5PC100_GPJ3(0); gpio <= S5PC100_GPJ3(7); gpio++) {
- s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(4));
- s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
- s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
- }
+ s5pc100_ide_cfg_gpios(S5PC100_GPJ3(0), 8);
/* CF_CS0, CF_CS1, CF_IORD, CF_IOWR */
- for (gpio = S5PC100_GPJ4(0); gpio <= S5PC100_GPJ4(3); gpio++) {
- s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(4));
- s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
- s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
- }
+ s5pc100_ide_cfg_gpios(S5PC100_GPJ4(0), 4);
/* EBI_OE, EBI_WE */
- for (gpio = S5PC100_GPK0(6); gpio <= S5PC100_GPK0(7); gpio++)
- s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(0));
+ s3c_gpio_cfgpin_range(S5PC100_GPK0(6), 2, S3C_GPIO_SFN(0));
/* CF_OE, CF_WE */
- for (gpio = S5PC100_GPK1(6); gpio <= S5PC100_GPK1(7); gpio++) {
- s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
- s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
- }
+ s3c_gpio_cfgrange_nopull(S5PC100_GPK1(6), 8, S3C_GPIO_SFN(2));
/* CF_CD */
s3c_gpio_cfgpin(S5PC100_GPK3(5), S3C_GPIO_SFN(2));
void samsung_keypad_cfg_gpio(unsigned int rows, unsigned int cols)
{
- unsigned int gpio;
- unsigned int end;
-
/* Set all the necessary GPH3 pins to special-function 3: KP_ROW[x] */
- end = S5PC100_GPH3(rows);
- for (gpio = S5PC100_GPH3(0); gpio < end; gpio++) {
- s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(3));
- s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
- }
+ s3c_gpio_cfgrange_nopull(S5PC100_GPH3(0), rows, S3C_GPIO_SFN(3));
/* Set all the necessary GPH2 pins to special-function 3: KP_COL[x] */
- end = S5PC100_GPH2(cols);
- for (gpio = S5PC100_GPH2(0); gpio < end; gpio++) {
- s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(3));
- s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
- }
+ s3c_gpio_cfgrange_nopull(S5PC100_GPH2(0), cols, S3C_GPIO_SFN(3));
}
void s5pc100_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width)
{
struct s3c_sdhci_platdata *pdata = dev->dev.platform_data;
- unsigned int gpio;
- unsigned int end;
unsigned int num;
num = width;
if (width == 8)
num = width - 2;
- end = S5PC100_GPG0(2 + num);
-
/* Set all the necessary GPG0/GPG1 pins to special-function 0 */
- for (gpio = S5PC100_GPG0(0); gpio < end; gpio++) {
- s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
- s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
- }
+ s3c_gpio_cfgrange_nopull(S5PC100_GPG0(0), 2 + num, S3C_GPIO_SFN(2));
- if (width == 8) {
- for (gpio = S5PC100_GPG1(0); gpio <= S5PC100_GPG1(1); gpio++) {
- s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
- s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
- }
- }
+ if (width == 8)
+ s3c_gpio_cfgrange_nopull(S5PC100_GPG1(0), 2, S3C_GPIO_SFN(2));
if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) {
s3c_gpio_setpull(S5PC100_GPG1(2), S3C_GPIO_PULL_UP);
void s5pc100_setup_sdhci1_cfg_gpio(struct platform_device *dev, int width)
{
struct s3c_sdhci_platdata *pdata = dev->dev.platform_data;
- unsigned int gpio;
- unsigned int end;
-
- end = S5PC100_GPG2(2 + width);
/* Set all the necessary GPG2 pins to special-function 2 */
- for (gpio = S5PC100_GPG2(0); gpio < end; gpio++) {
- s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
- s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
- }
+ s3c_gpio_cfgrange_nopull(S5PC100_GPG2(0), 2 + width, S3C_GPIO_SFN(2));
if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) {
s3c_gpio_setpull(S5PC100_GPG2(6), S3C_GPIO_PULL_UP);
void s5pc100_setup_sdhci2_cfg_gpio(struct platform_device *dev, int width)
{
struct s3c_sdhci_platdata *pdata = dev->dev.platform_data;
- unsigned int gpio;
- unsigned int end;
-
- end = S5PC100_GPG3(2 + width);
/* Set all the necessary GPG3 pins to special-function 2 */
- for (gpio = S5PC100_GPG3(0); gpio < end; gpio++) {
- s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
- s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
- }
+ s3c_gpio_cfgrange_nopull(S5PC100_GPG3(0), 2 + width, S3C_GPIO_SFN(2));
if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) {
s3c_gpio_setpull(S5PC100_GPG3(6), S3C_GPIO_PULL_UP);
config CPU_S5PV210
bool
- select PLAT_S5P
select S3C_PL330_DMA
select S5P_EXT_INT
+ select S5PV210_PM if PM
help
Enable S5PV210 CPU support
config MACH_AQUILA
bool "Aquila"
select CPU_S5PV210
- select ARCH_SPARSEMEM_ENABLE
select S3C_DEV_FB
select S5P_DEV_FIMC0
select S5P_DEV_FIMC1
config MACH_GONI
bool "GONI"
select CPU_S5PV210
- select ARCH_SPARSEMEM_ENABLE
+ select S5P_GPIO_INT
select S3C_DEV_FB
select S5P_DEV_FIMC0
select S5P_DEV_FIMC1
select S3C_DEV_HSMMC
select S3C_DEV_HSMMC1
select S3C_DEV_HSMMC2
+ select S3C_DEV_I2C1
+ select S3C_DEV_I2C2
+ select S3C_DEV_USB_HSOTG
select S5P_DEV_ONENAND
+ select SAMSUNG_DEV_KEYPAD
select S5PV210_SETUP_FB_24BPP
+ select S5PV210_SETUP_I2C1
+ select S5PV210_SETUP_I2C2
+ select S5PV210_SETUP_KEYPAD
select S5PV210_SETUP_SDHCI
help
Machine support for Samsung GONI board
config MACH_SMDKC110
bool "SMDKC110"
select CPU_S5PV210
- select ARCH_SPARSEMEM_ENABLE
select S3C_DEV_I2C1
select S3C_DEV_I2C2
select S3C_DEV_RTC
config MACH_SMDKV210
bool "SMDKV210"
select CPU_S5PV210
- select ARCH_SPARSEMEM_ENABLE
select S3C_DEV_HSMMC
select S3C_DEV_HSMMC1
select S3C_DEV_HSMMC2
help
Machine support for Samsung SMDKV210
+config MACH_TORBRECK
+ bool "Torbreck"
+ select CPU_S5PV210
+ select ARCH_SPARSEMEM_ENABLE
+ select S3C_DEV_HSMMC
+ select S3C_DEV_HSMMC1
+ select S3C_DEV_HSMMC2
+ select S3C_DEV_HSMMC3
+ select S3C_DEV_I2C1
+ select S3C_DEV_I2C2
+ select S3C_DEV_RTC
+ select S3C_DEV_WDT
+ select S5PV210_SETUP_I2C1
+ select S5PV210_SETUP_I2C2
+ select S5PV210_SETUP_SDHCI
+ help
+ Machine support for aESOP Torbreck
+
endmenu
+config S5PV210_PM
+ bool
+ help
+ Power Management code common to S5PV210
+
endif
obj-$(CONFIG_CPU_S5PV210) += cpu.o init.o clock.o dma.o gpiolib.o
obj-$(CONFIG_CPU_S5PV210) += setup-i2c0.o
+obj-$(CONFIG_S5PV210_PM) += pm.o sleep.o
+obj-$(CONFIG_CPU_FREQ) += cpufreq.o
# machine support
obj-$(CONFIG_MACH_SMDKV210) += mach-smdkv210.o
obj-$(CONFIG_MACH_SMDKC110) += mach-smdkc110.o
obj-$(CONFIG_MACH_GONI) += mach-goni.o
+obj-$(CONFIG_MACH_TORBRECK) += mach-torbreck.o
# device support
#include <plat/clock-clksrc.h>
#include <plat/s5pv210.h>
+static unsigned long xtal;
+
static struct clksrc_clk clk_mout_apll = {
.clk = {
.name = "mout_apll",
.reg_src = { .reg = S5P_CLK_SRC0, .shift = 12, .size = 1 },
};
+static struct clk *clkset_moutdmc0src_list[] = {
+ [0] = &clk_sclk_a2m.clk,
+ [1] = &clk_mout_mpll.clk,
+ [2] = NULL,
+ [3] = NULL,
+};
+
+static struct clksrc_sources clkset_moutdmc0src = {
+ .sources = clkset_moutdmc0src_list,
+ .nr_sources = ARRAY_SIZE(clkset_moutdmc0src_list),
+};
+
+static struct clksrc_clk clk_mout_dmc0 = {
+ .clk = {
+ .name = "mout_dmc0",
+ .id = -1,
+ },
+ .sources = &clkset_moutdmc0src,
+ .reg_src = { .reg = S5P_CLK_SRC6, .shift = 24, .size = 2 },
+};
+
+static struct clksrc_clk clk_sclk_dmc0 = {
+ .clk = {
+ .name = "sclk_dmc0",
+ .id = -1,
+ .parent = &clk_mout_dmc0.clk,
+ },
+ .reg_div = { .reg = S5P_CLK_DIV6, .shift = 28, .size = 4 },
+};
+
static unsigned long s5pv210_clk_imem_get_rate(struct clk *clk)
{
return clk_get_rate(clk->parent) / 2;
.get_rate = s5pv210_clk_imem_get_rate,
};
+static unsigned long s5pv210_clk_fout_apll_get_rate(struct clk *clk)
+{
+ return s5p_get_pll45xx(xtal, __raw_readl(S5P_APLL_CON), pll_4508);
+}
+
+static struct clk_ops clk_fout_apll_ops = {
+ .get_rate = s5pv210_clk_fout_apll_get_rate,
+};
+
static struct clk init_clocks_disable[] = {
{
+ .name = "pdma",
+ .id = 0,
+ .parent = &clk_hclk_psys.clk,
+ .enable = s5pv210_clk_ip0_ctrl,
+ .ctrlbit = (1 << 3),
+ }, {
+ .name = "pdma",
+ .id = 1,
+ .parent = &clk_hclk_psys.clk,
+ .enable = s5pv210_clk_ip0_ctrl,
+ .ctrlbit = (1 << 4),
+ }, {
.name = "rot",
.id = -1,
.parent = &clk_hclk_dsys.clk,
.parent = &clk_p,
.enable = s5pv210_clk_ip3_ctrl,
.ctrlbit = (1 << 6),
+ }, {
+ .name = "spdif",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s5pv210_clk_ip3_ctrl,
+ .ctrlbit = (1 << 0),
},
};
.nr_sources = ARRAY_SIZE(clkset_sclk_spdif_list),
};
+static int s5pv210_spdif_set_rate(struct clk *clk, unsigned long rate)
+{
+ struct clk *pclk;
+ int ret;
+
+ pclk = clk_get_parent(clk);
+ if (IS_ERR(pclk))
+ return -EINVAL;
+
+ ret = pclk->ops->set_rate(pclk, rate);
+ clk_put(pclk);
+
+ return ret;
+}
+
+static unsigned long s5pv210_spdif_get_rate(struct clk *clk)
+{
+ struct clk *pclk;
+ int rate;
+
+ pclk = clk_get_parent(clk);
+ if (IS_ERR(pclk))
+ return -EINVAL;
+
+ rate = pclk->ops->get_rate(clk);
+ clk_put(pclk);
+
+ return rate;
+}
+
+static struct clk_ops s5pv210_sclk_spdif_ops = {
+ .set_rate = s5pv210_spdif_set_rate,
+ .get_rate = s5pv210_spdif_get_rate,
+};
+
+static struct clksrc_clk clk_sclk_spdif = {
+ .clk = {
+ .name = "sclk_spdif",
+ .id = -1,
+ .enable = s5pv210_clk_mask0_ctrl,
+ .ctrlbit = (1 << 27),
+ .ops = &s5pv210_sclk_spdif_ops,
+ },
+ .sources = &clkset_sclk_spdif,
+ .reg_src = { .reg = S5P_CLK_SRC6, .shift = 12, .size = 2 },
+};
+
static struct clk *clkset_group2_list[] = {
[0] = &clk_ext_xtal_mux,
[1] = &clk_xusbxti,
},
.sources = &clkset_sclk_mixer,
.reg_src = { .reg = S5P_CLK_SRC1, .shift = 4, .size = 1 },
- }, {
- .clk = {
- .name = "sclk_spdif",
- .id = -1,
- .enable = s5pv210_clk_mask0_ctrl,
- .ctrlbit = (1 << 27),
- },
- .sources = &clkset_sclk_spdif,
- .reg_src = { .reg = S5P_CLK_SRC6, .shift = 12, .size = 2 },
}, {
.clk = {
.name = "sclk_fimc",
&clk_sclk_dac,
&clk_sclk_pixel,
&clk_sclk_hdmi,
+ &clk_mout_dmc0,
+ &clk_sclk_dmc0,
+ &clk_sclk_audio0,
+ &clk_sclk_audio1,
+ &clk_sclk_audio2,
+ &clk_sclk_spdif,
+};
+
+static u32 epll_div[][6] = {
+ { 48000000, 0, 48, 3, 3, 0 },
+ { 96000000, 0, 48, 3, 2, 0 },
+ { 144000000, 1, 72, 3, 2, 0 },
+ { 192000000, 0, 48, 3, 1, 0 },
+ { 288000000, 1, 72, 3, 1, 0 },
+ { 32750000, 1, 65, 3, 4, 35127 },
+ { 32768000, 1, 65, 3, 4, 35127 },
+ { 45158400, 0, 45, 3, 3, 10355 },
+ { 45000000, 0, 45, 3, 3, 10355 },
+ { 45158000, 0, 45, 3, 3, 10355 },
+ { 49125000, 0, 49, 3, 3, 9961 },
+ { 49152000, 0, 49, 3, 3, 9961 },
+ { 67737600, 1, 67, 3, 3, 48366 },
+ { 67738000, 1, 67, 3, 3, 48366 },
+ { 73800000, 1, 73, 3, 3, 47710 },
+ { 73728000, 1, 73, 3, 3, 47710 },
+ { 36000000, 1, 32, 3, 4, 0 },
+ { 60000000, 1, 60, 3, 3, 0 },
+ { 72000000, 1, 72, 3, 3, 0 },
+ { 80000000, 1, 80, 3, 3, 0 },
+ { 84000000, 0, 42, 3, 2, 0 },
+ { 50000000, 0, 50, 3, 3, 0 },
+};
+
+static int s5pv210_epll_set_rate(struct clk *clk, unsigned long rate)
+{
+ unsigned int epll_con, epll_con_k;
+ unsigned int i;
+
+ /* Return if nothing changed */
+ if (clk->rate == rate)
+ return 0;
+
+ epll_con = __raw_readl(S5P_EPLL_CON);
+ epll_con_k = __raw_readl(S5P_EPLL_CON1);
+
+ epll_con_k &= ~PLL46XX_KDIV_MASK;
+ epll_con &= ~(1 << 27 |
+ PLL46XX_MDIV_MASK << PLL46XX_MDIV_SHIFT |
+ PLL46XX_PDIV_MASK << PLL46XX_PDIV_SHIFT |
+ PLL46XX_SDIV_MASK << PLL46XX_SDIV_SHIFT);
+
+ for (i = 0; i < ARRAY_SIZE(epll_div); i++) {
+ if (epll_div[i][0] == rate) {
+ epll_con_k |= epll_div[i][5] << 0;
+ epll_con |= (epll_div[i][1] << 27 |
+ epll_div[i][2] << PLL46XX_MDIV_SHIFT |
+ epll_div[i][3] << PLL46XX_PDIV_SHIFT |
+ epll_div[i][4] << PLL46XX_SDIV_SHIFT);
+ break;
+ }
+ }
+
+ if (i == ARRAY_SIZE(epll_div)) {
+ printk(KERN_ERR "%s: Invalid Clock EPLL Frequency\n",
+ __func__);
+ return -EINVAL;
+ }
+
+ __raw_writel(epll_con, S5P_EPLL_CON);
+ __raw_writel(epll_con_k, S5P_EPLL_CON1);
+
+ printk(KERN_WARNING "EPLL Rate changes from %lu to %lu\n",
+ clk->rate, rate);
+
+ clk->rate = rate;
+
+ return 0;
+}
+
+static struct clk_ops s5pv210_epll_ops = {
+ .set_rate = s5pv210_epll_set_rate,
+ .get_rate = s5p_epll_get_rate,
};
void __init_or_cpufreq s5pv210_setup_clocks(void)
{
struct clk *xtal_clk;
- unsigned long xtal;
unsigned long vpllsrc;
unsigned long armclk;
unsigned long hclk_msys;
unsigned int ptr;
u32 clkdiv0, clkdiv1;
+ /* Set functions for clk_fout_epll */
+ clk_fout_epll.enable = s5p_epll_enable;
+ clk_fout_epll.ops = &s5pv210_epll_ops;
+
printk(KERN_DEBUG "%s: registering clocks\n", __func__);
clkdiv0 = __raw_readl(S5P_CLK_DIV0);
apll = s5p_get_pll45xx(xtal, __raw_readl(S5P_APLL_CON), pll_4508);
mpll = s5p_get_pll45xx(xtal, __raw_readl(S5P_MPLL_CON), pll_4502);
- epll = s5p_get_pll45xx(xtal, __raw_readl(S5P_EPLL_CON), pll_4500);
+ epll = s5p_get_pll46xx(xtal, __raw_readl(S5P_EPLL_CON),
+ __raw_readl(S5P_EPLL_CON1), pll_4600);
vpllsrc = clk_get_rate(&clk_vpllsrc.clk);
vpll = s5p_get_pll45xx(vpllsrc, __raw_readl(S5P_VPLL_CON), pll_4502);
- clk_fout_apll.rate = apll;
+ clk_fout_apll.ops = &clk_fout_apll_ops;
clk_fout_mpll.rate = mpll;
clk_fout_epll.rate = epll;
clk_fout_vpll.rate = vpll;
.pfn = __phys_to_pfn(S5PV210_PA_SROMC),
.length = SZ_4K,
.type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S5P_VA_DMC0,
+ .pfn = __phys_to_pfn(S5PV210_PA_DMC0),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S5P_VA_DMC1,
+ .pfn = __phys_to_pfn(S5PV210_PA_DMC1),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S3C_VA_USB_HSPHY,
+ .pfn =__phys_to_pfn(S5PV210_PA_HSPHY),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
}
};
--- /dev/null
+/* linux/arch/arm/mach-s5pv210/cpufreq.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * CPU frequency scaling for S5PC110/S5PV210
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/cpufreq.h>
+
+#include <mach/map.h>
+#include <mach/regs-clock.h>
+
+static struct clk *cpu_clk;
+static struct clk *dmc0_clk;
+static struct clk *dmc1_clk;
+static struct cpufreq_freqs freqs;
+
+/* APLL M,P,S values for 1G/800Mhz */
+#define APLL_VAL_1000 ((1 << 31) | (125 << 16) | (3 << 8) | 1)
+#define APLL_VAL_800 ((1 << 31) | (100 << 16) | (3 << 8) | 1)
+
+/*
+ * DRAM configurations to calculate refresh counter for changing
+ * frequency of memory.
+ */
+struct dram_conf {
+ unsigned long freq; /* HZ */
+ unsigned long refresh; /* DRAM refresh counter * 1000 */
+};
+
+/* DRAM configuration (DMC0 and DMC1) */
+static struct dram_conf s5pv210_dram_conf[2];
+
+enum perf_level {
+ L0, L1, L2, L3, L4,
+};
+
+enum s5pv210_mem_type {
+ LPDDR = 0x1,
+ LPDDR2 = 0x2,
+ DDR2 = 0x4,
+};
+
+enum s5pv210_dmc_port {
+ DMC0 = 0,
+ DMC1,
+};
+
+static struct cpufreq_frequency_table s5pv210_freq_table[] = {
+ {L0, 1000*1000},
+ {L1, 800*1000},
+ {L2, 400*1000},
+ {L3, 200*1000},
+ {L4, 100*1000},
+ {0, CPUFREQ_TABLE_END},
+};
+
+static u32 clkdiv_val[5][11] = {
+ /*
+ * Clock divider value for following
+ * { APLL, A2M, HCLK_MSYS, PCLK_MSYS,
+ * HCLK_DSYS, PCLK_DSYS, HCLK_PSYS, PCLK_PSYS,
+ * ONEDRAM, MFC, G3D }
+ */
+
+ /* L0 : [1000/200/100][166/83][133/66][200/200] */
+ {0, 4, 4, 1, 3, 1, 4, 1, 3, 0, 0},
+
+ /* L1 : [800/200/100][166/83][133/66][200/200] */
+ {0, 3, 3, 1, 3, 1, 4, 1, 3, 0, 0},
+
+ /* L2 : [400/200/100][166/83][133/66][200/200] */
+ {1, 3, 1, 1, 3, 1, 4, 1, 3, 0, 0},
+
+ /* L3 : [200/200/100][166/83][133/66][200/200] */
+ {3, 3, 1, 1, 3, 1, 4, 1, 3, 0, 0},
+
+ /* L4 : [100/100/100][83/83][66/66][100/100] */
+ {7, 7, 0, 0, 7, 0, 9, 0, 7, 0, 0},
+};
+
+/*
+ * This function set DRAM refresh counter
+ * accoriding to operating frequency of DRAM
+ * ch: DMC port number 0 or 1
+ * freq: Operating frequency of DRAM(KHz)
+ */
+static void s5pv210_set_refresh(enum s5pv210_dmc_port ch, unsigned long freq)
+{
+ unsigned long tmp, tmp1;
+ void __iomem *reg = NULL;
+
+ if (ch == DMC0)
+ reg = (S5P_VA_DMC0 + 0x30);
+ else if (ch == DMC1)
+ reg = (S5P_VA_DMC1 + 0x30);
+ else
+ printk(KERN_ERR "Cannot find DMC port\n");
+
+ /* Find current DRAM frequency */
+ tmp = s5pv210_dram_conf[ch].freq;
+
+ do_div(tmp, freq);
+
+ tmp1 = s5pv210_dram_conf[ch].refresh;
+
+ do_div(tmp1, tmp);
+
+ __raw_writel(tmp1, reg);
+}
+
+int s5pv210_verify_speed(struct cpufreq_policy *policy)
+{
+ if (policy->cpu)
+ return -EINVAL;
+
+ return cpufreq_frequency_table_verify(policy, s5pv210_freq_table);
+}
+
+unsigned int s5pv210_getspeed(unsigned int cpu)
+{
+ if (cpu)
+ return 0;
+
+ return clk_get_rate(cpu_clk) / 1000;
+}
+
+static int s5pv210_target(struct cpufreq_policy *policy,
+ unsigned int target_freq,
+ unsigned int relation)
+{
+ unsigned long reg;
+ unsigned int index, priv_index;
+ unsigned int pll_changing = 0;
+ unsigned int bus_speed_changing = 0;
+
+ freqs.old = s5pv210_getspeed(0);
+
+ if (cpufreq_frequency_table_target(policy, s5pv210_freq_table,
+ target_freq, relation, &index))
+ return -EINVAL;
+
+ freqs.new = s5pv210_freq_table[index].frequency;
+ freqs.cpu = 0;
+
+ if (freqs.new == freqs.old)
+ return 0;
+
+ /* Finding current running level index */
+ if (cpufreq_frequency_table_target(policy, s5pv210_freq_table,
+ freqs.old, relation, &priv_index))
+ return -EINVAL;
+
+ cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+
+ if (freqs.new > freqs.old) {
+ /* Voltage up: will be implemented */
+ }
+
+ /* Check if there need to change PLL */
+ if ((index == L0) || (priv_index == L0))
+ pll_changing = 1;
+
+ /* Check if there need to change System bus clock */
+ if ((index == L4) || (priv_index == L4))
+ bus_speed_changing = 1;
+
+ if (bus_speed_changing) {
+ /*
+ * Reconfigure DRAM refresh counter value for minimum
+ * temporary clock while changing divider.
+ * expected clock is 83Mhz : 7.8usec/(1/83Mhz) = 0x287
+ */
+ if (pll_changing)
+ s5pv210_set_refresh(DMC1, 83000);
+ else
+ s5pv210_set_refresh(DMC1, 100000);
+
+ s5pv210_set_refresh(DMC0, 83000);
+ }
+
+ /*
+ * APLL should be changed in this level
+ * APLL -> MPLL(for stable transition) -> APLL
+ * Some clock source's clock API are not prepared.
+ * Do not use clock API in below code.
+ */
+ if (pll_changing) {
+ /*
+ * 1. Temporary Change divider for MFC and G3D
+ * SCLKA2M(200/1=200)->(200/4=50)Mhz
+ */
+ reg = __raw_readl(S5P_CLK_DIV2);
+ reg &= ~(S5P_CLKDIV2_G3D_MASK | S5P_CLKDIV2_MFC_MASK);
+ reg |= (3 << S5P_CLKDIV2_G3D_SHIFT) |
+ (3 << S5P_CLKDIV2_MFC_SHIFT);
+ __raw_writel(reg, S5P_CLK_DIV2);
+
+ /* For MFC, G3D dividing */
+ do {
+ reg = __raw_readl(S5P_CLKDIV_STAT0);
+ } while (reg & ((1 << 16) | (1 << 17)));
+
+ /*
+ * 2. Change SCLKA2M(200Mhz)to SCLKMPLL in MFC_MUX, G3D MUX
+ * (200/4=50)->(667/4=166)Mhz
+ */
+ reg = __raw_readl(S5P_CLK_SRC2);
+ reg &= ~(S5P_CLKSRC2_G3D_MASK | S5P_CLKSRC2_MFC_MASK);
+ reg |= (1 << S5P_CLKSRC2_G3D_SHIFT) |
+ (1 << S5P_CLKSRC2_MFC_SHIFT);
+ __raw_writel(reg, S5P_CLK_SRC2);
+
+ do {
+ reg = __raw_readl(S5P_CLKMUX_STAT1);
+ } while (reg & ((1 << 7) | (1 << 3)));
+
+ /*
+ * 3. DMC1 refresh count for 133Mhz if (index == L4) is
+ * true refresh counter is already programed in upper
+ * code. 0x287@83Mhz
+ */
+ if (!bus_speed_changing)
+ s5pv210_set_refresh(DMC1, 133000);
+
+ /* 4. SCLKAPLL -> SCLKMPLL */
+ reg = __raw_readl(S5P_CLK_SRC0);
+ reg &= ~(S5P_CLKSRC0_MUX200_MASK);
+ reg |= (0x1 << S5P_CLKSRC0_MUX200_SHIFT);
+ __raw_writel(reg, S5P_CLK_SRC0);
+
+ do {
+ reg = __raw_readl(S5P_CLKMUX_STAT0);
+ } while (reg & (0x1 << 18));
+
+ }
+
+ /* Change divider */
+ reg = __raw_readl(S5P_CLK_DIV0);
+
+ reg &= ~(S5P_CLKDIV0_APLL_MASK | S5P_CLKDIV0_A2M_MASK |
+ S5P_CLKDIV0_HCLK200_MASK | S5P_CLKDIV0_PCLK100_MASK |
+ S5P_CLKDIV0_HCLK166_MASK | S5P_CLKDIV0_PCLK83_MASK |
+ S5P_CLKDIV0_HCLK133_MASK | S5P_CLKDIV0_PCLK66_MASK);
+
+ reg |= ((clkdiv_val[index][0] << S5P_CLKDIV0_APLL_SHIFT) |
+ (clkdiv_val[index][1] << S5P_CLKDIV0_A2M_SHIFT) |
+ (clkdiv_val[index][2] << S5P_CLKDIV0_HCLK200_SHIFT) |
+ (clkdiv_val[index][3] << S5P_CLKDIV0_PCLK100_SHIFT) |
+ (clkdiv_val[index][4] << S5P_CLKDIV0_HCLK166_SHIFT) |
+ (clkdiv_val[index][5] << S5P_CLKDIV0_PCLK83_SHIFT) |
+ (clkdiv_val[index][6] << S5P_CLKDIV0_HCLK133_SHIFT) |
+ (clkdiv_val[index][7] << S5P_CLKDIV0_PCLK66_SHIFT));
+
+ __raw_writel(reg, S5P_CLK_DIV0);
+
+ do {
+ reg = __raw_readl(S5P_CLKDIV_STAT0);
+ } while (reg & 0xff);
+
+ /* ARM MCS value changed */
+ reg = __raw_readl(S5P_ARM_MCS_CON);
+ reg &= ~0x3;
+ if (index >= L3)
+ reg |= 0x3;
+ else
+ reg |= 0x1;
+
+ __raw_writel(reg, S5P_ARM_MCS_CON);
+
+ if (pll_changing) {
+ /* 5. Set Lock time = 30us*24Mhz = 0x2cf */
+ __raw_writel(0x2cf, S5P_APLL_LOCK);
+
+ /*
+ * 6. Turn on APLL
+ * 6-1. Set PMS values
+ * 6-2. Wait untile the PLL is locked
+ */
+ if (index == L0)
+ __raw_writel(APLL_VAL_1000, S5P_APLL_CON);
+ else
+ __raw_writel(APLL_VAL_800, S5P_APLL_CON);
+
+ do {
+ reg = __raw_readl(S5P_APLL_CON);
+ } while (!(reg & (0x1 << 29)));
+
+ /*
+ * 7. Change souce clock from SCLKMPLL(667Mhz)
+ * to SCLKA2M(200Mhz) in MFC_MUX and G3D MUX
+ * (667/4=166)->(200/4=50)Mhz
+ */
+ reg = __raw_readl(S5P_CLK_SRC2);
+ reg &= ~(S5P_CLKSRC2_G3D_MASK | S5P_CLKSRC2_MFC_MASK);
+ reg |= (0 << S5P_CLKSRC2_G3D_SHIFT) |
+ (0 << S5P_CLKSRC2_MFC_SHIFT);
+ __raw_writel(reg, S5P_CLK_SRC2);
+
+ do {
+ reg = __raw_readl(S5P_CLKMUX_STAT1);
+ } while (reg & ((1 << 7) | (1 << 3)));
+
+ /*
+ * 8. Change divider for MFC and G3D
+ * (200/4=50)->(200/1=200)Mhz
+ */
+ reg = __raw_readl(S5P_CLK_DIV2);
+ reg &= ~(S5P_CLKDIV2_G3D_MASK | S5P_CLKDIV2_MFC_MASK);
+ reg |= (clkdiv_val[index][10] << S5P_CLKDIV2_G3D_SHIFT) |
+ (clkdiv_val[index][9] << S5P_CLKDIV2_MFC_SHIFT);
+ __raw_writel(reg, S5P_CLK_DIV2);
+
+ /* For MFC, G3D dividing */
+ do {
+ reg = __raw_readl(S5P_CLKDIV_STAT0);
+ } while (reg & ((1 << 16) | (1 << 17)));
+
+ /* 9. Change MPLL to APLL in MSYS_MUX */
+ reg = __raw_readl(S5P_CLK_SRC0);
+ reg &= ~(S5P_CLKSRC0_MUX200_MASK);
+ reg |= (0x0 << S5P_CLKSRC0_MUX200_SHIFT);
+ __raw_writel(reg, S5P_CLK_SRC0);
+
+ do {
+ reg = __raw_readl(S5P_CLKMUX_STAT0);
+ } while (reg & (0x1 << 18));
+
+ /*
+ * 10. DMC1 refresh counter
+ * L4 : DMC1 = 100Mhz 7.8us/(1/100) = 0x30c
+ * Others : DMC1 = 200Mhz 7.8us/(1/200) = 0x618
+ */
+ if (!bus_speed_changing)
+ s5pv210_set_refresh(DMC1, 200000);
+ }
+
+ /*
+ * L4 level need to change memory bus speed, hence onedram clock divier
+ * and memory refresh parameter should be changed
+ */
+ if (bus_speed_changing) {
+ reg = __raw_readl(S5P_CLK_DIV6);
+ reg &= ~S5P_CLKDIV6_ONEDRAM_MASK;
+ reg |= (clkdiv_val[index][8] << S5P_CLKDIV6_ONEDRAM_SHIFT);
+ __raw_writel(reg, S5P_CLK_DIV6);
+
+ do {
+ reg = __raw_readl(S5P_CLKDIV_STAT1);
+ } while (reg & (1 << 15));
+
+ /* Reconfigure DRAM refresh counter value */
+ if (index != L4) {
+ /*
+ * DMC0 : 166Mhz
+ * DMC1 : 200Mhz
+ */
+ s5pv210_set_refresh(DMC0, 166000);
+ s5pv210_set_refresh(DMC1, 200000);
+ } else {
+ /*
+ * DMC0 : 83Mhz
+ * DMC1 : 100Mhz
+ */
+ s5pv210_set_refresh(DMC0, 83000);
+ s5pv210_set_refresh(DMC1, 100000);
+ }
+ }
+
+ if (freqs.new < freqs.old) {
+ /* Voltage down: will be implemented */
+ }
+
+ cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+
+ printk(KERN_DEBUG "Perf changed[L%d]\n", index);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int s5pv210_cpufreq_suspend(struct cpufreq_policy *policy,
+ pm_message_t pmsg)
+{
+ return 0;
+}
+
+static int s5pv210_cpufreq_resume(struct cpufreq_policy *policy)
+{
+ return 0;
+}
+#endif
+
+static int check_mem_type(void __iomem *dmc_reg)
+{
+ unsigned long val;
+
+ val = __raw_readl(dmc_reg + 0x4);
+ val = (val & (0xf << 8));
+
+ return val >> 8;
+}
+
+static int __init s5pv210_cpu_init(struct cpufreq_policy *policy)
+{
+ unsigned long mem_type;
+
+ cpu_clk = clk_get(NULL, "armclk");
+ if (IS_ERR(cpu_clk))
+ return PTR_ERR(cpu_clk);
+
+ dmc0_clk = clk_get(NULL, "sclk_dmc0");
+ if (IS_ERR(dmc0_clk)) {
+ clk_put(cpu_clk);
+ return PTR_ERR(dmc0_clk);
+ }
+
+ dmc1_clk = clk_get(NULL, "hclk_msys");
+ if (IS_ERR(dmc1_clk)) {
+ clk_put(dmc0_clk);
+ clk_put(cpu_clk);
+ return PTR_ERR(dmc1_clk);
+ }
+
+ if (policy->cpu != 0)
+ return -EINVAL;
+
+ /*
+ * check_mem_type : This driver only support LPDDR & LPDDR2.
+ * other memory type is not supported.
+ */
+ mem_type = check_mem_type(S5P_VA_DMC0);
+
+ if ((mem_type != LPDDR) && (mem_type != LPDDR2)) {
+ printk(KERN_ERR "CPUFreq doesn't support this memory type\n");
+ return -EINVAL;
+ }
+
+ /* Find current refresh counter and frequency each DMC */
+ s5pv210_dram_conf[0].refresh = (__raw_readl(S5P_VA_DMC0 + 0x30) * 1000);
+ s5pv210_dram_conf[0].freq = clk_get_rate(dmc0_clk);
+
+ s5pv210_dram_conf[1].refresh = (__raw_readl(S5P_VA_DMC1 + 0x30) * 1000);
+ s5pv210_dram_conf[1].freq = clk_get_rate(dmc1_clk);
+
+ policy->cur = policy->min = policy->max = s5pv210_getspeed(0);
+
+ cpufreq_frequency_table_get_attr(s5pv210_freq_table, policy->cpu);
+
+ policy->cpuinfo.transition_latency = 40000;
+
+ return cpufreq_frequency_table_cpuinfo(policy, s5pv210_freq_table);
+}
+
+static struct cpufreq_driver s5pv210_driver = {
+ .flags = CPUFREQ_STICKY,
+ .verify = s5pv210_verify_speed,
+ .target = s5pv210_target,
+ .get = s5pv210_getspeed,
+ .init = s5pv210_cpu_init,
+ .name = "s5pv210",
+#ifdef CONFIG_PM
+ .suspend = s5pv210_cpufreq_suspend,
+ .resume = s5pv210_cpufreq_resume,
+#endif
+};
+
+static int __init s5pv210_cpufreq_init(void)
+{
+ return cpufreq_register_driver(&s5pv210_driver);
+}
+
+late_initcall(s5pv210_cpufreq_init);
/* configure GPIO for i2s port */
switch (pdev->id) {
case 1:
- s3c_gpio_cfgpin(S5PV210_GPC0(0), S3C_GPIO_SFN(2));
- s3c_gpio_cfgpin(S5PV210_GPC0(1), S3C_GPIO_SFN(2));
- s3c_gpio_cfgpin(S5PV210_GPC0(2), S3C_GPIO_SFN(2));
- s3c_gpio_cfgpin(S5PV210_GPC0(3), S3C_GPIO_SFN(2));
- s3c_gpio_cfgpin(S5PV210_GPC0(4), S3C_GPIO_SFN(2));
+ s3c_gpio_cfgpin_range(S5PV210_GPC0(0), 5, S3C_GPIO_SFN(2));
break;
case 2:
- s3c_gpio_cfgpin(S5PV210_GPC1(0), S3C_GPIO_SFN(4));
- s3c_gpio_cfgpin(S5PV210_GPC1(1), S3C_GPIO_SFN(4));
- s3c_gpio_cfgpin(S5PV210_GPC1(2), S3C_GPIO_SFN(4));
- s3c_gpio_cfgpin(S5PV210_GPC1(3), S3C_GPIO_SFN(4));
- s3c_gpio_cfgpin(S5PV210_GPC1(4), S3C_GPIO_SFN(4));
+ s3c_gpio_cfgpin_range(S5PV210_GPC1(0), 5, S3C_GPIO_SFN(4));
break;
case -1:
- s3c_gpio_cfgpin(S5PV210_GPI(0), S3C_GPIO_SFN(2));
- s3c_gpio_cfgpin(S5PV210_GPI(1), S3C_GPIO_SFN(2));
- s3c_gpio_cfgpin(S5PV210_GPI(2), S3C_GPIO_SFN(2));
- s3c_gpio_cfgpin(S5PV210_GPI(3), S3C_GPIO_SFN(2));
- s3c_gpio_cfgpin(S5PV210_GPI(4), S3C_GPIO_SFN(2));
- s3c_gpio_cfgpin(S5PV210_GPI(5), S3C_GPIO_SFN(2));
- s3c_gpio_cfgpin(S5PV210_GPI(6), S3C_GPIO_SFN(2));
+ s3c_gpio_cfgpin_range(S5PV210_GPI(0), 7, S3C_GPIO_SFN(2));
break;
default:
{
switch (pdev->id) {
case 0:
- s3c_gpio_cfgpin(S5PV210_GPI(0), S3C_GPIO_SFN(3));
- s3c_gpio_cfgpin(S5PV210_GPI(1), S3C_GPIO_SFN(3));
- s3c_gpio_cfgpin(S5PV210_GPI(2), S3C_GPIO_SFN(3));
- s3c_gpio_cfgpin(S5PV210_GPI(3), S3C_GPIO_SFN(3));
- s3c_gpio_cfgpin(S5PV210_GPI(4), S3C_GPIO_SFN(3));
+ s3c_gpio_cfgpin_range(S5PV210_GPI(0), 5, S3C_GPIO_SFN(3));
break;
case 1:
- s3c_gpio_cfgpin(S5PV210_GPC0(0), S3C_GPIO_SFN(3));
- s3c_gpio_cfgpin(S5PV210_GPC0(1), S3C_GPIO_SFN(3));
- s3c_gpio_cfgpin(S5PV210_GPC0(2), S3C_GPIO_SFN(3));
- s3c_gpio_cfgpin(S5PV210_GPC0(3), S3C_GPIO_SFN(3));
- s3c_gpio_cfgpin(S5PV210_GPC0(4), S3C_GPIO_SFN(3));
+ s3c_gpio_cfgpin_range(S5PV210_GPC0(0), 5, S3C_GPIO_SFN(3));
break;
case 2:
- s3c_gpio_cfgpin(S5PV210_GPC1(0), S3C_GPIO_SFN(2));
- s3c_gpio_cfgpin(S5PV210_GPC1(1), S3C_GPIO_SFN(2));
- s3c_gpio_cfgpin(S5PV210_GPC1(2), S3C_GPIO_SFN(2));
- s3c_gpio_cfgpin(S5PV210_GPC1(3), S3C_GPIO_SFN(2));
- s3c_gpio_cfgpin(S5PV210_GPC1(4), S3C_GPIO_SFN(2));
+ s3c_gpio_cfgpin_range(S5PV210_GPC1(0), 5, S3C_GPIO_SFN(2));
break;
default:
printk(KERN_DEBUG "Invalid PCM Controller number!");
static int s5pv210_ac97_cfg_gpio(struct platform_device *pdev)
{
- s3c_gpio_cfgpin(S5PV210_GPC0(0), S3C_GPIO_SFN(4));
- s3c_gpio_cfgpin(S5PV210_GPC0(1), S3C_GPIO_SFN(4));
- s3c_gpio_cfgpin(S5PV210_GPC0(2), S3C_GPIO_SFN(4));
- s3c_gpio_cfgpin(S5PV210_GPC0(3), S3C_GPIO_SFN(4));
- s3c_gpio_cfgpin(S5PV210_GPC0(4), S3C_GPIO_SFN(4));
-
- return 0;
+ return s3c_gpio_cfgpin_range(S5PV210_GPC0(0), 5, S3C_GPIO_SFN(4));
}
static struct resource s5pv210_ac97_resource[] = {
.coherent_dma_mask = DMA_BIT_MASK(32),
},
};
+
+/* S/PDIF Controller platform_device */
+
+static int s5pv210_spdif_cfg_gpio(struct platform_device *pdev)
+{
+ s3c_gpio_cfgpin_range(S5PV210_GPC1(0), 2, S3C_GPIO_SFN(3));
+
+ return 0;
+}
+
+static struct resource s5pv210_spdif_resource[] = {
+ [0] = {
+ .start = S5PV210_PA_SPDIF,
+ .end = S5PV210_PA_SPDIF + 0x100 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = DMACH_SPDIF,
+ .end = DMACH_SPDIF,
+ .flags = IORESOURCE_DMA,
+ },
+};
+
+static struct s3c_audio_pdata samsung_spdif_pdata = {
+ .cfg_gpio = s5pv210_spdif_cfg_gpio,
+};
+
+static u64 s5pv210_spdif_dmamask = DMA_BIT_MASK(32);
+
+struct platform_device s5pv210_device_spdif = {
+ .name = "samsung-spdif",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(s5pv210_spdif_resource),
+ .resource = s5pv210_spdif_resource,
+ .dev = {
+ .platform_data = &samsung_spdif_pdata,
+ .dma_mask = &s5pv210_spdif_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+};
*/
static int s5pv210_spi_cfg_gpio(struct platform_device *pdev)
{
+ unsigned int base;
+
switch (pdev->id) {
case 0:
- s3c_gpio_cfgpin(S5PV210_GPB(0), S3C_GPIO_SFN(2));
- s3c_gpio_cfgpin(S5PV210_GPB(1), S3C_GPIO_SFN(2));
- s3c_gpio_cfgpin(S5PV210_GPB(2), S3C_GPIO_SFN(2));
- s3c_gpio_setpull(S5PV210_GPB(0), S3C_GPIO_PULL_UP);
- s3c_gpio_setpull(S5PV210_GPB(1), S3C_GPIO_PULL_UP);
- s3c_gpio_setpull(S5PV210_GPB(2), S3C_GPIO_PULL_UP);
+ base = S5PV210_GPB(0);
break;
case 1:
- s3c_gpio_cfgpin(S5PV210_GPB(4), S3C_GPIO_SFN(2));
- s3c_gpio_cfgpin(S5PV210_GPB(5), S3C_GPIO_SFN(2));
- s3c_gpio_cfgpin(S5PV210_GPB(6), S3C_GPIO_SFN(2));
- s3c_gpio_setpull(S5PV210_GPB(4), S3C_GPIO_PULL_UP);
- s3c_gpio_setpull(S5PV210_GPB(5), S3C_GPIO_PULL_UP);
- s3c_gpio_setpull(S5PV210_GPB(6), S3C_GPIO_PULL_UP);
+ base = S5PV210_GPB(4);
break;
default:
return -EINVAL;
}
+ s3c_gpio_cfgall_range(base, 3,
+ S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
+
return 0;
}
static struct platform_device s5pv210_device_pdma0 = {
.name = "s3c-pl330",
- .id = 1,
+ .id = 0,
.num_resources = ARRAY_SIZE(s5pv210_pdma0_resource),
.resource = s5pv210_pdma0_resource,
.dev = {
static struct platform_device s5pv210_device_pdma1 = {
.name = "s3c-pl330",
- .id = 2,
+ .id = 1,
.num_resources = ARRAY_SIZE(s5pv210_pdma1_resource),
.resource = s5pv210_pdma1_resource,
.dev = {
.label = "GPG3",
},
}, {
+ .config = &gpio_cfg_noint,
.chip = {
.base = S5PV210_GPI(0),
.ngpio = S5PV210_GPIO_I_NR,
}, {
.base = (S5P_VA_GPIO + 0xC00),
.config = &gpio_cfg_noint,
+ .irq_base = IRQ_EINT(0),
.chip = {
.base = S5PV210_GPH0(0),
.ngpio = S5PV210_GPIO_H0_NR,
.label = "GPH0",
+ .to_irq = samsung_gpiolib_to_irq,
},
}, {
.base = (S5P_VA_GPIO + 0xC20),
.config = &gpio_cfg_noint,
+ .irq_base = IRQ_EINT(8),
.chip = {
.base = S5PV210_GPH1(0),
.ngpio = S5PV210_GPIO_H1_NR,
.label = "GPH1",
+ .to_irq = samsung_gpiolib_to_irq,
},
}, {
.base = (S5P_VA_GPIO + 0xC40),
.config = &gpio_cfg_noint,
+ .irq_base = IRQ_EINT(16),
.chip = {
.base = S5PV210_GPH2(0),
.ngpio = S5PV210_GPIO_H2_NR,
.label = "GPH2",
+ .to_irq = samsung_gpiolib_to_irq,
},
}, {
.base = (S5P_VA_GPIO + 0xC60),
.config = &gpio_cfg_noint,
+ .irq_base = IRQ_EINT(24),
.chip = {
.base = S5PV210_GPH3(0),
.ngpio = S5PV210_GPIO_H3_NR,
.label = "GPH3",
+ .to_irq = samsung_gpiolib_to_irq,
},
},
};
{
struct s3c_gpio_chip *chip = s5pv210_gpio_4bit;
int nr_chips = ARRAY_SIZE(s5pv210_gpio_4bit);
+ int gpioint_group = 0;
int i = 0;
for (i = 0; i < nr_chips; i++, chip++) {
- if (chip->config == NULL)
+ if (chip->config == NULL) {
chip->config = &gpio_cfg;
+ chip->group = gpioint_group++;
+ }
if (chip->base == NULL)
chip->base = S5PV210_BANK_BASE(i);
}
#define IRQ_SPI1 S5P_IRQ_VIC1(16)
#define IRQ_SPI2 S5P_IRQ_VIC1(17)
#define IRQ_IRDA S5P_IRQ_VIC1(18)
-#define IRQ_CAN0 S5P_IRQ_VIC1(19)
-#define IRQ_CAN1 S5P_IRQ_VIC1(20)
+#define IRQ_IIC2 S5P_IRQ_VIC1(19)
+#define IRQ_IIC3 S5P_IRQ_VIC1(20)
#define IRQ_HSIRX S5P_IRQ_VIC1(21)
#define IRQ_HSITX S5P_IRQ_VIC1(22)
#define IRQ_UHOST S5P_IRQ_VIC1(23)
#define IRQ_IPC S5P_IRQ_VIC3(0)
#define IRQ_HOSTIF S5P_IRQ_VIC3(1)
-#define IRQ_MMC3 S5P_IRQ_VIC3(2)
+#define IRQ_HSMMC3 S5P_IRQ_VIC3(2)
#define IRQ_CEC S5P_IRQ_VIC3(3)
#define IRQ_TSI S5P_IRQ_VIC3(4)
#define IRQ_MDNIE0 S5P_IRQ_VIC3(5)
#define S5P_EINT_BASE1 (S5P_IRQ_VIC0(0))
#define S5P_EINT_BASE2 (IRQ_VIC_END + 1)
+/* GPIO interrupt */
+#define S5P_GPIOINT_BASE (IRQ_EINT(31) + 1)
+#define S5P_GPIOINT_GROUP_MAXNR 22
+
/* Set the default NR_IRQS */
-#define NR_IRQS (IRQ_EINT(31) + 1)
+#define NR_IRQS (IRQ_EINT(31) + S5P_GPIOINT_COUNT + 1)
/* Compatibility */
#define IRQ_LCD_FIFO IRQ_LCD0
#define S5P_SZ_UART SZ_256
+#define S3C_VA_UARTx(x) (S3C_VA_UART + ((x) * S3C_UART_OFFSET))
+
#define S5PV210_PA_SROMC (0xE8000000)
#define S5PV210_PA_CFCON (0xE8200000)
#define S5PV210_PA_HSMMC(x) (0xEB000000 + ((x) * 0x100000))
+#define S5PV210_PA_HSOTG (0xEC000000)
+#define S5PV210_PA_HSPHY (0xEC100000)
+
#define S5PV210_PA_VIC0 (0xF2000000)
#define S5PV210_PA_VIC1 (0xF2100000)
#define S5PV210_PA_VIC2 (0xF2200000)
#define S5PV210_PA_SDRAM (0x20000000)
#define S5P_PA_SDRAM S5PV210_PA_SDRAM
+/* S/PDIF */
+#define S5PV210_PA_SPDIF 0xE1100000
+
/* I2S */
#define S5PV210_PA_IIS0 0xEEE30000
#define S5PV210_PA_IIS1 0xE2100000
#define S5PV210_PA_ADC (0xE1700000)
+#define S5PV210_PA_DMC0 (0xF0000000)
+#define S5PV210_PA_DMC1 (0xF1400000)
+
/* compatibiltiy defines. */
#define S3C_PA_UART S5PV210_PA_UART
#define S3C_PA_HSMMC0 S5PV210_PA_HSMMC(0)
#define S3C_PA_FB S5PV210_PA_FB
#define S3C_PA_RTC S5PV210_PA_RTC
#define S3C_PA_WDT S5PV210_PA_WATCHDOG
+#define S3C_PA_USB_HSOTG S5PV210_PA_HSOTG
#define S5P_PA_FIMC0 S5PV210_PA_FIMC0
#define S5P_PA_FIMC1 S5PV210_PA_FIMC1
#define S5P_PA_FIMC2 S5PV210_PA_FIMC2
--- /dev/null
+/* linux/arch/arm/mach-s5pv210/include/mach/pm-core.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * Based on arch/arm/mach-s3c2410/include/mach/pm-core.h,
+ * Copyright 2008 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * S5PV210 - PM core support for arch/arm/plat-s5p/pm.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+static inline void s3c_pm_debug_init_uart(void)
+{
+ /* nothing here yet */
+}
+
+static inline void s3c_pm_arch_prepare_irqs(void)
+{
+ __raw_writel(s3c_irqwake_intmask, S5P_WAKEUP_MASK);
+ __raw_writel(s3c_irqwake_eintmask, S5P_EINT_WAKEUP_MASK);
+}
+
+static inline void s3c_pm_arch_stop_clocks(void)
+{
+ /* nothing here yet */
+}
+
+static inline void s3c_pm_arch_show_resume_irqs(void)
+{
+ /* nothing here yet */
+}
+
+static inline void s3c_pm_arch_update_uart(void __iomem *regs,
+ struct pm_uart_save *save)
+{
+ /* nothing here yet */
+}
#define S5P_APLL_CON S5P_CLKREG(0x100)
#define S5P_MPLL_CON S5P_CLKREG(0x108)
#define S5P_EPLL_CON S5P_CLKREG(0x110)
+#define S5P_EPLL_CON1 S5P_CLKREG(0x114)
#define S5P_VPLL_CON S5P_CLKREG(0x120)
#define S5P_CLK_SRC0 S5P_CLKREG(0x200)
#define S5P_CLKGATE_BUS1 S5P_CLKREG(0x488)
#define S5P_CLK_OUT S5P_CLKREG(0x500)
+/* DIV/MUX STATUS */
+#define S5P_CLKDIV_STAT0 S5P_CLKREG(0x1000)
+#define S5P_CLKDIV_STAT1 S5P_CLKREG(0x1004)
+#define S5P_CLKMUX_STAT0 S5P_CLKREG(0x1100)
+#define S5P_CLKMUX_STAT1 S5P_CLKREG(0x1104)
+
/* CLKSRC0 */
-#define S5P_CLKSRC0_MUX200_MASK (0x1<<16)
+#define S5P_CLKSRC0_MUX200_SHIFT (16)
+#define S5P_CLKSRC0_MUX200_MASK (0x1 << S5P_CLKSRC0_MUX200_SHIFT)
#define S5P_CLKSRC0_MUX166_MASK (0x1<<20)
#define S5P_CLKSRC0_MUX133_MASK (0x1<<24)
+/* CLKSRC2 */
+#define S5P_CLKSRC2_G3D_SHIFT (0)
+#define S5P_CLKSRC2_G3D_MASK (0x3 << S5P_CLKSRC2_G3D_SHIFT)
+#define S5P_CLKSRC2_MFC_SHIFT (4)
+#define S5P_CLKSRC2_MFC_MASK (0x3 << S5P_CLKSRC2_MFC_SHIFT)
+
+/* CLKSRC6*/
+#define S5P_CLKSRC6_ONEDRAM_SHIFT (24)
+#define S5P_CLKSRC6_ONEDRAM_MASK (0x3 << S5P_CLKSRC6_ONEDRAM_SHIFT)
+
/* CLKDIV0 */
#define S5P_CLKDIV0_APLL_SHIFT (0)
#define S5P_CLKDIV0_APLL_MASK (0x7 << S5P_CLKDIV0_APLL_SHIFT)
#define S5P_CLKDIV0_PCLK66_SHIFT (28)
#define S5P_CLKDIV0_PCLK66_MASK (0x7 << S5P_CLKDIV0_PCLK66_SHIFT)
+/* CLKDIV2 */
+#define S5P_CLKDIV2_G3D_SHIFT (0)
+#define S5P_CLKDIV2_G3D_MASK (0xF << S5P_CLKDIV2_G3D_SHIFT)
+#define S5P_CLKDIV2_MFC_SHIFT (4)
+#define S5P_CLKDIV2_MFC_MASK (0xF << S5P_CLKDIV2_MFC_SHIFT)
+
+/* CLKDIV6 */
+#define S5P_CLKDIV6_ONEDRAM_SHIFT (28)
+#define S5P_CLKDIV6_ONEDRAM_MASK (0xF << S5P_CLKDIV6_ONEDRAM_SHIFT)
+
#define S5P_SWRESET S5P_CLKREG(0x2000)
+#define S5P_ARM_MCS_CON S5P_CLKREG(0x6100)
+
/* Registers related to power management */
#define S5P_PWR_CFG S5P_CLKREG(0xC000)
#define S5P_EINT_WAKEUP_MASK S5P_CLKREG(0xC004)
-#define S5P_WAKEUP_MASK S5P_CLKREG(0xC008)
+#define S5P_WAKEUP_MASK S5P_CLKREG(0xC008)
#define S5P_PWR_MODE S5P_CLKREG(0xC00C)
#define S5P_NORMAL_CFG S5P_CLKREG(0xC010)
#define S5P_IDLE_CFG S5P_CLKREG(0xC020)
#define S5P_SLEEP_CFG_USBOSC_EN (1 << 1)
/* OTHERS Resgister */
+#define S5P_OTHERS_RET_IO (1 << 31)
+#define S5P_OTHERS_RET_CF (1 << 30)
+#define S5P_OTHERS_RET_MMC (1 << 29)
+#define S5P_OTHERS_RET_UART (1 << 28)
#define S5P_OTHERS_USB_SIG_MASK (1 << 16)
-#define S5P_OTHERS_MIPI_DPHY_EN (1 << 28)
/* MIPI */
#define S5P_MIPI_DPHY_EN (3)
#define eint_irq_to_bit(irq) (1 << (EINT_OFFSET(irq) & 0x7))
-/* values for S5P_EXTINT0 */
-#define S5P_EXTINT_LOWLEV (0x00)
-#define S5P_EXTINT_HILEV (0x01)
-#define S5P_EXTINT_FALLEDGE (0x02)
-#define S5P_EXTINT_RISEEDGE (0x03)
-#define S5P_EXTINT_BOTHEDGE (0x04)
-
#define EINT_MODE S3C_GPIO_SFN(0xf)
#define EINT_GPIO_0(x) S5PV210_GPH0(x)
--- /dev/null
+/* arch/arm/mach-s5pv210/include/mach/regs-sys.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * S5PV210 - System registers definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#define S5PV210_USB_PHY_CON (S3C_VA_SYS + 0xE80C)
+#define S5PV210_USB_PHY0_EN (1 << 0)
+#define S5PV210_USB_PHY1_EN (1 << 1)
+
+/* compatibility defines for s3c-hsotg driver */
+#define S3C64XX_OTHERS S5PV210_USB_PHY_CON
+#define S3C64XX_OTHERS_USBMASK S5PV210_USB_PHY0_EN
#ifndef __ASM_ARCH_VMALLOC_H
#define __ASM_ARCH_VMALLOC_H __FILE__
-#define VMALLOC_END (0xE0000000UL)
+#define VMALLOC_END 0xF6000000UL
#endif /* __ASM_ARCH_VMALLOC_H */
#include <linux/i2c.h>
#include <linux/i2c-gpio.h>
#include <linux/mfd/max8998.h>
+#include <linux/mfd/wm8994/pdata.h>
+#include <linux/regulator/fixed.h>
#include <linux/gpio_keys.h>
#include <linux/input.h>
#include <linux/gpio.h>
};
#endif
+static struct regulator_consumer_supply wm8994_fixed_voltage0_supplies[] = {
+ {
+ .dev_name = "5-001a",
+ .supply = "DBVDD",
+ }, {
+ .dev_name = "5-001a",
+ .supply = "AVDD2",
+ }, {
+ .dev_name = "5-001a",
+ .supply = "CPVDD",
+ },
+};
+
+static struct regulator_consumer_supply wm8994_fixed_voltage1_supplies[] = {
+ {
+ .dev_name = "5-001a",
+ .supply = "SPKVDD1",
+ }, {
+ .dev_name = "5-001a",
+ .supply = "SPKVDD2",
+ },
+};
+
+static struct regulator_init_data wm8994_fixed_voltage0_init_data = {
+ .constraints = {
+ .always_on = 1,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(wm8994_fixed_voltage0_supplies),
+ .consumer_supplies = wm8994_fixed_voltage0_supplies,
+};
+
+static struct regulator_init_data wm8994_fixed_voltage1_init_data = {
+ .constraints = {
+ .always_on = 1,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(wm8994_fixed_voltage1_supplies),
+ .consumer_supplies = wm8994_fixed_voltage1_supplies,
+};
+
+static struct fixed_voltage_config wm8994_fixed_voltage0_config = {
+ .supply_name = "VCC_1.8V_PDA",
+ .microvolts = 1800000,
+ .gpio = -EINVAL,
+ .init_data = &wm8994_fixed_voltage0_init_data,
+};
+
+static struct fixed_voltage_config wm8994_fixed_voltage1_config = {
+ .supply_name = "V_BAT",
+ .microvolts = 3700000,
+ .gpio = -EINVAL,
+ .init_data = &wm8994_fixed_voltage1_init_data,
+};
+
+static struct platform_device wm8994_fixed_voltage0 = {
+ .name = "reg-fixed-voltage",
+ .id = 0,
+ .dev = {
+ .platform_data = &wm8994_fixed_voltage0_config,
+ },
+};
+
+static struct platform_device wm8994_fixed_voltage1 = {
+ .name = "reg-fixed-voltage",
+ .id = 1,
+ .dev = {
+ .platform_data = &wm8994_fixed_voltage1_config,
+ },
+};
+
+static struct regulator_consumer_supply wm8994_avdd1_supply = {
+ .dev_name = "5-001a",
+ .supply = "AVDD1",
+};
+
+static struct regulator_consumer_supply wm8994_dcvdd_supply = {
+ .dev_name = "5-001a",
+ .supply = "DCVDD",
+};
+
+static struct regulator_init_data wm8994_ldo1_data = {
+ .constraints = {
+ .name = "AVDD1_3.0V",
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &wm8994_avdd1_supply,
+};
+
+static struct regulator_init_data wm8994_ldo2_data = {
+ .constraints = {
+ .name = "DCVDD_1.0V",
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &wm8994_dcvdd_supply,
+};
+
+static struct wm8994_pdata wm8994_platform_data = {
+ /* configure gpio1 function: 0x0001(Logic level input/output) */
+ .gpio_defaults[0] = 0x0001,
+ /* configure gpio3/4/5/7 function for AIF2 voice */
+ .gpio_defaults[2] = 0x8100,
+ .gpio_defaults[3] = 0x8100,
+ .gpio_defaults[4] = 0x8100,
+ .gpio_defaults[6] = 0x0100,
+ /* configure gpio8/9/10/11 function for AIF3 BT */
+ .gpio_defaults[7] = 0x8100,
+ .gpio_defaults[8] = 0x0100,
+ .gpio_defaults[9] = 0x0100,
+ .gpio_defaults[10] = 0x0100,
+ .ldo[0] = { S5PV210_MP03(6), NULL, &wm8994_ldo1_data }, /* XM0FRNB_2 */
+ .ldo[1] = { 0, NULL, &wm8994_ldo2_data },
+};
+
/* GPIO I2C PMIC */
#define AP_I2C_GPIO_PMIC_BUS_4 4
static struct i2c_gpio_platform_data aquila_i2c_gpio_pmic_data = {
#endif
};
+/* GPIO I2C AP 1.8V */
+#define AP_I2C_GPIO_BUS_5 5
+static struct i2c_gpio_platform_data aquila_i2c_gpio5_data = {
+ .sda_pin = S5PV210_MP05(3), /* XM0ADDR_11 */
+ .scl_pin = S5PV210_MP05(2), /* XM0ADDR_10 */
+};
+
+static struct platform_device aquila_i2c_gpio5 = {
+ .name = "i2c-gpio",
+ .id = AP_I2C_GPIO_BUS_5,
+ .dev = {
+ .platform_data = &aquila_i2c_gpio5_data,
+ },
+};
+
+static struct i2c_board_info i2c_gpio5_devs[] __initdata = {
+ {
+ /* CS/ADDR = low 0x34 (FYI: high = 0x36) */
+ I2C_BOARD_INFO("wm8994", 0x1a),
+ .platform_data = &wm8994_platform_data,
+ },
+};
+
/* PMIC Power button */
static struct gpio_keys_button aquila_gpio_keys_table[] = {
{
static struct platform_device *aquila_devices[] __initdata = {
&aquila_i2c_gpio_pmic,
+ &aquila_i2c_gpio5,
&aquila_device_gpiokeys,
&s3c_device_fb,
&s5p_device_onenand,
&s5p_device_fimc0,
&s5p_device_fimc1,
&s5p_device_fimc2,
+ &s5pv210_device_iis0,
+ &wm8994_fixed_voltage0,
+ &wm8994_fixed_voltage1,
};
+static void __init aquila_sound_init(void)
+{
+ unsigned int gpio;
+
+ /* CODEC_XTAL_EN
+ *
+ * The Aquila board have a oscillator which provide main clock
+ * to WM8994 codec. The oscillator provide 24MHz clock to WM8994
+ * clock. Set gpio setting of "CODEC_XTAL_EN" to enable a oscillator.
+ * */
+ gpio = S5PV210_GPH3(2); /* XEINT_26 */
+ gpio_request(gpio, "CODEC_XTAL_EN");
+ s3c_gpio_cfgpin(gpio, S3C_GPIO_OUTPUT);
+ s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+
+ /* Ths main clock of WM8994 codec uses the output of CLKOUT pin.
+ * The CLKOUT[9:8] set to 0x3(XUSBXTI) of 0xE010E000(OTHERS)
+ * because it needs 24MHz clock to operate WM8994 codec.
+ */
+ __raw_writel(__raw_readl(S5P_OTHERS) | (0x3 << 8), S5P_OTHERS);
+}
+
static void __init aquila_map_io(void)
{
s5p_init_io(NULL, 0, S5P_VA_CHIPID);
s3c_fimc_setname(1, "s5p-fimc");
s3c_fimc_setname(2, "s5p-fimc");
+ /* SOUND */
+ aquila_sound_init();
+ i2c_register_board_info(AP_I2C_GPIO_BUS_5, i2c_gpio5_devs,
+ ARRAY_SIZE(i2c_gpio5_devs));
+
/* FB */
s3c_fb_set_platdata(&aquila_lcd_pdata);
#include <linux/fb.h>
#include <linux/i2c.h>
#include <linux/i2c-gpio.h>
+#include <linux/i2c/qt602240_ts.h>
#include <linux/mfd/max8998.h>
+#include <linux/mfd/wm8994/pdata.h>
+#include <linux/regulator/fixed.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/spi_gpio.h>
+#include <linux/lcd.h>
#include <linux/gpio_keys.h>
#include <linux/input.h>
#include <linux/gpio.h>
#include <plat/devs.h>
#include <plat/cpu.h>
#include <plat/fb.h>
+#include <plat/iic.h>
+#include <plat/keypad.h>
#include <plat/sdhci.h>
+#include <plat/clock.h>
/* Following are default values for UCON, ULCON and UFCON UART registers */
#define GONI_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
/* Frame Buffer */
static struct s3c_fb_pd_win goni_fb_win0 = {
.win_mode = {
- .pixclock = 1000000000000ULL / ((16+16+2+480)*(28+3+2+800)*55),
.left_margin = 16,
.right_margin = 16,
- .upper_margin = 3,
+ .upper_margin = 2,
.lower_margin = 28,
.hsync_len = 2,
- .vsync_len = 2,
+ .vsync_len = 1,
.xres = 480,
.yres = 800,
.refresh = 55,
.setup_gpio = s5pv210_fb_gpio_setup_24bpp,
};
+static int lcd_power_on(struct lcd_device *ld, int enable)
+{
+ return 1;
+}
+
+static int reset_lcd(struct lcd_device *ld)
+{
+ static unsigned int first = 1;
+ int reset_gpio = -1;
+
+ reset_gpio = S5PV210_MP05(5);
+
+ if (first) {
+ gpio_request(reset_gpio, "MLCD_RST");
+ first = 0;
+ }
+
+ gpio_direction_output(reset_gpio, 1);
+ return 1;
+}
+
+static struct lcd_platform_data goni_lcd_platform_data = {
+ .reset = reset_lcd,
+ .power_on = lcd_power_on,
+ .lcd_enabled = 0,
+ .reset_delay = 120, /* 120ms */
+ .power_on_delay = 25, /* 25ms */
+ .power_off_delay = 200, /* 200ms */
+};
+
+#define LCD_BUS_NUM 3
+static struct spi_board_info spi_board_info[] __initdata = {
+ {
+ .modalias = "s6e63m0",
+ .platform_data = &goni_lcd_platform_data,
+ .max_speed_hz = 1200000,
+ .bus_num = LCD_BUS_NUM,
+ .chip_select = 0,
+ .mode = SPI_MODE_3,
+ .controller_data = (void *)S5PV210_MP01(1), /* DISPLAY_CS */
+ },
+};
+
+static struct spi_gpio_platform_data lcd_spi_gpio_data = {
+ .sck = S5PV210_MP04(1), /* DISPLAY_CLK */
+ .mosi = S5PV210_MP04(3), /* DISPLAY_SI */
+ .miso = SPI_GPIO_NO_MISO,
+ .num_chipselect = 1,
+};
+
+static struct platform_device goni_spi_gpio = {
+ .name = "spi_gpio",
+ .id = LCD_BUS_NUM,
+ .dev = {
+ .parent = &s3c_device_fb.dev,
+ .platform_data = &lcd_spi_gpio_data,
+ },
+};
+
+/* KEYPAD */
+static uint32_t keymap[] __initdata = {
+ /* KEY(row, col, keycode) */
+ KEY(0, 1, KEY_MENU), /* Send */
+ KEY(0, 2, KEY_BACK), /* End */
+ KEY(1, 1, KEY_CONFIG), /* Half shot */
+ KEY(1, 2, KEY_VOLUMEUP),
+ KEY(2, 1, KEY_CAMERA), /* Full shot */
+ KEY(2, 2, KEY_VOLUMEDOWN),
+};
+
+static struct matrix_keymap_data keymap_data __initdata = {
+ .keymap = keymap,
+ .keymap_size = ARRAY_SIZE(keymap),
+};
+
+static struct samsung_keypad_platdata keypad_data __initdata = {
+ .keymap_data = &keymap_data,
+ .rows = 3,
+ .cols = 3,
+};
+
+/* Radio */
+static struct i2c_board_info i2c1_devs[] __initdata = {
+ {
+ I2C_BOARD_INFO("si470x", 0x10),
+ },
+};
+
+static void __init goni_radio_init(void)
+{
+ int gpio;
+
+ gpio = S5PV210_GPJ2(4); /* XMSMDATA_4 */
+ gpio_request(gpio, "FM_INT");
+ s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(0xf));
+ i2c1_devs[0].irq = gpio_to_irq(gpio);
+
+ gpio = S5PV210_GPJ2(5); /* XMSMDATA_5 */
+ gpio_request(gpio, "FM_RST");
+ gpio_direction_output(gpio, 1);
+}
+
+/* TSP */
+static struct qt602240_platform_data qt602240_platform_data = {
+ .x_line = 17,
+ .y_line = 11,
+ .x_size = 800,
+ .y_size = 480,
+ .blen = 0x21,
+ .threshold = 0x28,
+ .voltage = 2800000, /* 2.8V */
+ .orient = QT602240_DIAGONAL,
+};
+
+static struct s3c2410_platform_i2c i2c2_data __initdata = {
+ .flags = 0,
+ .bus_num = 2,
+ .slave_addr = 0x10,
+ .frequency = 400 * 1000,
+ .sda_delay = 100,
+};
+
+static struct i2c_board_info i2c2_devs[] __initdata = {
+ {
+ I2C_BOARD_INFO("qt602240_ts", 0x4a),
+ .platform_data = &qt602240_platform_data,
+ },
+};
+
+static void __init goni_tsp_init(void)
+{
+ int gpio;
+
+ gpio = S5PV210_GPJ1(3); /* XMSMADDR_11 */
+ gpio_request(gpio, "TSP_LDO_ON");
+ gpio_direction_output(gpio, 1);
+ gpio_export(gpio, 0);
+
+ gpio = S5PV210_GPJ0(5); /* XMSMADDR_5 */
+ gpio_request(gpio, "TSP_INT");
+
+ s5p_register_gpio_interrupt(gpio);
+ s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(0xf));
+ s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP);
+ i2c2_devs[0].irq = gpio_to_irq(gpio);
+}
+
/* MAX8998 regulators */
#if defined(CONFIG_REGULATOR_MAX8998) || defined(CONFIG_REGULATOR_MAX8998_MODULE)
+static struct regulator_consumer_supply goni_ldo5_consumers[] = {
+ REGULATOR_SUPPLY("vmmc", "s3c-sdhci.0"),
+};
+
static struct regulator_init_data goni_ldo2_data = {
.constraints = {
.name = "VALIVE_1.1V",
.max_uV = 2800000,
.apply_uV = 1,
},
+ .num_consumer_supplies = ARRAY_SIZE(goni_ldo5_consumers),
+ .consumer_supplies = goni_ldo5_consumers,
};
static struct regulator_init_data goni_ldo6_data = {
};
#endif
+static struct regulator_consumer_supply wm8994_fixed_voltage0_supplies[] = {
+ {
+ .dev_name = "5-001a",
+ .supply = "DBVDD",
+ }, {
+ .dev_name = "5-001a",
+ .supply = "AVDD2",
+ }, {
+ .dev_name = "5-001a",
+ .supply = "CPVDD",
+ },
+};
+
+static struct regulator_consumer_supply wm8994_fixed_voltage1_supplies[] = {
+ {
+ .dev_name = "5-001a",
+ .supply = "SPKVDD1",
+ }, {
+ .dev_name = "5-001a",
+ .supply = "SPKVDD2",
+ },
+};
+
+static struct regulator_init_data wm8994_fixed_voltage0_init_data = {
+ .constraints = {
+ .always_on = 1,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(wm8994_fixed_voltage0_supplies),
+ .consumer_supplies = wm8994_fixed_voltage0_supplies,
+};
+
+static struct regulator_init_data wm8994_fixed_voltage1_init_data = {
+ .constraints = {
+ .always_on = 1,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(wm8994_fixed_voltage1_supplies),
+ .consumer_supplies = wm8994_fixed_voltage1_supplies,
+};
+
+static struct fixed_voltage_config wm8994_fixed_voltage0_config = {
+ .supply_name = "VCC_1.8V_PDA",
+ .microvolts = 1800000,
+ .gpio = -EINVAL,
+ .init_data = &wm8994_fixed_voltage0_init_data,
+};
+
+static struct fixed_voltage_config wm8994_fixed_voltage1_config = {
+ .supply_name = "V_BAT",
+ .microvolts = 3700000,
+ .gpio = -EINVAL,
+ .init_data = &wm8994_fixed_voltage1_init_data,
+};
+
+static struct platform_device wm8994_fixed_voltage0 = {
+ .name = "reg-fixed-voltage",
+ .id = 0,
+ .dev = {
+ .platform_data = &wm8994_fixed_voltage0_config,
+ },
+};
+
+static struct platform_device wm8994_fixed_voltage1 = {
+ .name = "reg-fixed-voltage",
+ .id = 1,
+ .dev = {
+ .platform_data = &wm8994_fixed_voltage1_config,
+ },
+};
+
+static struct regulator_consumer_supply wm8994_avdd1_supply = {
+ .dev_name = "5-001a",
+ .supply = "AVDD1",
+};
+
+static struct regulator_consumer_supply wm8994_dcvdd_supply = {
+ .dev_name = "5-001a",
+ .supply = "DCVDD",
+};
+
+static struct regulator_init_data wm8994_ldo1_data = {
+ .constraints = {
+ .name = "AVDD1_3.0V",
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &wm8994_avdd1_supply,
+};
+
+static struct regulator_init_data wm8994_ldo2_data = {
+ .constraints = {
+ .name = "DCVDD_1.0V",
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &wm8994_dcvdd_supply,
+};
+
+static struct wm8994_pdata wm8994_platform_data = {
+ /* configure gpio1 function: 0x0001(Logic level input/output) */
+ .gpio_defaults[0] = 0x0001,
+ /* configure gpio3/4/5/7 function for AIF2 voice */
+ .gpio_defaults[2] = 0x8100,
+ .gpio_defaults[3] = 0x8100,
+ .gpio_defaults[4] = 0x8100,
+ .gpio_defaults[6] = 0x0100,
+ /* configure gpio8/9/10/11 function for AIF3 BT */
+ .gpio_defaults[7] = 0x8100,
+ .gpio_defaults[8] = 0x0100,
+ .gpio_defaults[9] = 0x0100,
+ .gpio_defaults[10] = 0x0100,
+ .ldo[0] = { S5PV210_MP03(6), NULL, &wm8994_ldo1_data }, /* XM0FRNB_2 */
+ .ldo[1] = { 0, NULL, &wm8994_ldo2_data },
+};
+
/* GPIO I2C PMIC */
#define AP_I2C_GPIO_PMIC_BUS_4 4
static struct i2c_gpio_platform_data goni_i2c_gpio_pmic_data = {
#endif
};
+/* GPIO I2C AP 1.8V */
+#define AP_I2C_GPIO_BUS_5 5
+static struct i2c_gpio_platform_data goni_i2c_gpio5_data = {
+ .sda_pin = S5PV210_MP05(3), /* XM0ADDR_11 */
+ .scl_pin = S5PV210_MP05(2), /* XM0ADDR_10 */
+};
+
+static struct platform_device goni_i2c_gpio5 = {
+ .name = "i2c-gpio",
+ .id = AP_I2C_GPIO_BUS_5,
+ .dev = {
+ .platform_data = &goni_i2c_gpio5_data,
+ },
+};
+
+static struct i2c_board_info i2c_gpio5_devs[] __initdata = {
+ {
+ /* CS/ADDR = low 0x34 (FYI: high = 0x36) */
+ I2C_BOARD_INFO("wm8994", 0x1a),
+ .platform_data = &wm8994_platform_data,
+ },
+};
+
/* PMIC Power button */
static struct gpio_keys_button goni_gpio_keys_table[] = {
{
.ext_cd_gpio_invert = 1,
};
+static struct regulator_consumer_supply mmc2_supplies[] = {
+ REGULATOR_SUPPLY("vmmc", "s3c-sdhci.2"),
+};
+
+static struct regulator_init_data mmc2_fixed_voltage_init_data = {
+ .constraints = {
+ .name = "V_TF_2.8V",
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(mmc2_supplies),
+ .consumer_supplies = mmc2_supplies,
+};
+
+static struct fixed_voltage_config mmc2_fixed_voltage_config = {
+ .supply_name = "EXT_FLASH_EN",
+ .microvolts = 2800000,
+ .gpio = GONI_EXT_FLASH_EN,
+ .enable_high = true,
+ .init_data = &mmc2_fixed_voltage_init_data,
+};
+
+static struct platform_device mmc2_fixed_voltage = {
+ .name = "reg-fixed-voltage",
+ .id = 2,
+ .dev = {
+ .platform_data = &mmc2_fixed_voltage_config,
+ },
+};
+
static void goni_setup_sdhci(void)
{
- gpio_request(GONI_EXT_FLASH_EN, "FLASH_EN");
- gpio_direction_output(GONI_EXT_FLASH_EN, 1);
-
s3c_sdhci0_set_platdata(&goni_hsmmc0_data);
s3c_sdhci1_set_platdata(&goni_hsmmc1_data);
s3c_sdhci2_set_platdata(&goni_hsmmc2_data);
static struct platform_device *goni_devices[] __initdata = {
&s3c_device_fb,
&s5p_device_onenand,
+ &goni_spi_gpio,
&goni_i2c_gpio_pmic,
+ &goni_i2c_gpio5,
+ &mmc2_fixed_voltage,
&goni_device_gpiokeys,
&s5p_device_fimc0,
&s5p_device_fimc1,
&s3c_device_hsmmc0,
&s3c_device_hsmmc1,
&s3c_device_hsmmc2,
+ &s5pv210_device_iis0,
+ &s3c_device_usb_hsotg,
+ &samsung_device_keypad,
+ &s3c_device_i2c1,
+ &s3c_device_i2c2,
+ &wm8994_fixed_voltage0,
+ &wm8994_fixed_voltage1,
};
+static void __init goni_sound_init(void)
+{
+ /* Ths main clock of WM8994 codec uses the output of CLKOUT pin.
+ * The CLKOUT[9:8] set to 0x3(XUSBXTI) of 0xE010E000(OTHERS)
+ * because it needs 24MHz clock to operate WM8994 codec.
+ */
+ __raw_writel(__raw_readl(S5P_OTHERS) | (0x3 << 8), S5P_OTHERS);
+}
+
static void __init goni_map_io(void)
{
s5p_init_io(NULL, 0, S5P_VA_CHIPID);
static void __init goni_machine_init(void)
{
+ /* Radio: call before I2C 1 registeration */
+ goni_radio_init();
+
+ /* I2C1 */
+ s3c_i2c1_set_platdata(NULL);
+ i2c_register_board_info(1, i2c1_devs, ARRAY_SIZE(i2c1_devs));
+
+ /* TSP: call before I2C 2 registeration */
+ goni_tsp_init();
+
+ /* I2C2 */
+ s3c_i2c2_set_platdata(&i2c2_data);
+ i2c_register_board_info(2, i2c2_devs, ARRAY_SIZE(i2c2_devs));
+
/* PMIC */
goni_pmic_init();
i2c_register_board_info(AP_I2C_GPIO_PMIC_BUS_4, i2c_gpio_pmic_devs,
/* SDHCI */
goni_setup_sdhci();
+ /* SOUND */
+ goni_sound_init();
+ i2c_register_board_info(AP_I2C_GPIO_BUS_5, i2c_gpio5_devs,
+ ARRAY_SIZE(i2c_gpio5_devs));
+
/* FB */
s3c_fb_set_platdata(&goni_lcd_pdata);
+ /* SPI */
+ spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
+
+ /* KEYPAD */
+ samsung_keypad_set_platdata(&keypad_data);
+
+ clk_xusbxti.rate = 24000000;
+
platform_add_devices(goni_devices, ARRAY_SIZE(goni_devices));
}
#include <plat/cpu.h>
#include <plat/ata.h>
#include <plat/iic.h>
+#include <plat/pm.h>
/* Following are default values for UCON, ULCON and UFCON UART registers */
#define SMDKC110_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
static struct platform_device *smdkc110_devices[] __initdata = {
&s5pv210_device_iis0,
&s5pv210_device_ac97,
+ &s5pv210_device_spdif,
&s3c_device_cfcon,
&s3c_device_i2c0,
&s3c_device_i2c1,
static void __init smdkc110_machine_init(void)
{
+ s3c_pm_init();
+
s3c_i2c0_set_platdata(NULL);
s3c_i2c1_set_platdata(NULL);
s3c_i2c2_set_platdata(NULL);
#include <plat/ata.h>
#include <plat/iic.h>
#include <plat/keypad.h>
+#include <plat/pm.h>
/* Following are default values for UCON, ULCON and UFCON UART registers */
#define SMDKV210_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
static struct platform_device *smdkv210_devices[] __initdata = {
&s5pv210_device_iis0,
&s5pv210_device_ac97,
+ &s5pv210_device_spdif,
&s3c_device_adc,
&s3c_device_cfcon,
&s3c_device_hsmmc0,
static void __init smdkv210_machine_init(void)
{
+ s3c_pm_init();
+
samsung_keypad_set_platdata(&smdkv210_keypad_data);
s3c24xx_ts_set_platdata(&s3c_ts_platform);
--- /dev/null
+/* linux/arch/arm/mach-s5pv210/mach-torbreck.c
+ *
+ * Copyright (c) 2010 aESOP Community
+ * http://www.aesop.or.kr/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+
+#include <mach/map.h>
+#include <mach/regs-clock.h>
+
+#include <plat/regs-serial.h>
+#include <plat/s5pv210.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+#include <plat/iic.h>
+
+/* Following are default values for UCON, ULCON and UFCON UART registers */
+#define TORBRECK_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
+ S3C2410_UCON_RXILEVEL | \
+ S3C2410_UCON_TXIRQMODE | \
+ S3C2410_UCON_RXIRQMODE | \
+ S3C2410_UCON_RXFIFO_TOI | \
+ S3C2443_UCON_RXERR_IRQEN)
+
+#define TORBRECK_ULCON_DEFAULT S3C2410_LCON_CS8
+
+#define TORBRECK_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \
+ S5PV210_UFCON_TXTRIG4 | \
+ S5PV210_UFCON_RXTRIG4)
+
+static struct s3c2410_uartcfg torbreck_uartcfgs[] __initdata = {
+ [0] = {
+ .hwport = 0,
+ .flags = 0,
+ .ucon = TORBRECK_UCON_DEFAULT,
+ .ulcon = TORBRECK_ULCON_DEFAULT,
+ .ufcon = TORBRECK_UFCON_DEFAULT,
+ },
+ [1] = {
+ .hwport = 1,
+ .flags = 0,
+ .ucon = TORBRECK_UCON_DEFAULT,
+ .ulcon = TORBRECK_ULCON_DEFAULT,
+ .ufcon = TORBRECK_UFCON_DEFAULT,
+ },
+ [2] = {
+ .hwport = 2,
+ .flags = 0,
+ .ucon = TORBRECK_UCON_DEFAULT,
+ .ulcon = TORBRECK_ULCON_DEFAULT,
+ .ufcon = TORBRECK_UFCON_DEFAULT,
+ },
+ [3] = {
+ .hwport = 3,
+ .flags = 0,
+ .ucon = TORBRECK_UCON_DEFAULT,
+ .ulcon = TORBRECK_ULCON_DEFAULT,
+ .ufcon = TORBRECK_UFCON_DEFAULT,
+ },
+};
+
+static struct platform_device *torbreck_devices[] __initdata = {
+ &s5pv210_device_iis0,
+ &s3c_device_cfcon,
+ &s3c_device_hsmmc0,
+ &s3c_device_hsmmc1,
+ &s3c_device_hsmmc2,
+ &s3c_device_hsmmc3,
+ &s3c_device_i2c0,
+ &s3c_device_i2c1,
+ &s3c_device_i2c2,
+ &s3c_device_rtc,
+ &s3c_device_wdt,
+};
+
+static struct i2c_board_info torbreck_i2c_devs0[] __initdata = {
+ /* To Be Updated */
+};
+
+static struct i2c_board_info torbreck_i2c_devs1[] __initdata = {
+ /* To Be Updated */
+};
+
+static struct i2c_board_info torbreck_i2c_devs2[] __initdata = {
+ /* To Be Updated */
+};
+
+static void __init torbreck_map_io(void)
+{
+ s5p_init_io(NULL, 0, S5P_VA_CHIPID);
+ s3c24xx_init_clocks(24000000);
+ s3c24xx_init_uarts(torbreck_uartcfgs, ARRAY_SIZE(torbreck_uartcfgs));
+}
+
+static void __init torbreck_machine_init(void)
+{
+ s3c_i2c0_set_platdata(NULL);
+ s3c_i2c1_set_platdata(NULL);
+ s3c_i2c2_set_platdata(NULL);
+ i2c_register_board_info(0, torbreck_i2c_devs0,
+ ARRAY_SIZE(torbreck_i2c_devs0));
+ i2c_register_board_info(1, torbreck_i2c_devs1,
+ ARRAY_SIZE(torbreck_i2c_devs1));
+ i2c_register_board_info(2, torbreck_i2c_devs2,
+ ARRAY_SIZE(torbreck_i2c_devs2));
+
+ platform_add_devices(torbreck_devices, ARRAY_SIZE(torbreck_devices));
+}
+
+MACHINE_START(TORBRECK, "TORBRECK")
+ /* Maintainer: Hyunchul Ko <ghcstop@gmail.com> */
+ .boot_params = S5P_PA_SDRAM + 0x100,
+ .init_irq = s5pv210_init_irq,
+ .map_io = torbreck_map_io,
+ .init_machine = torbreck_machine_init,
+ .timer = &s3c24xx_timer,
+MACHINE_END
--- /dev/null
+/* linux/arch/arm/mach-s5pv210/pm.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * S5PV210 - Power Management support
+ *
+ * Based on arch/arm/mach-s3c2410/pm.c
+ * Copyright (c) 2006 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/suspend.h>
+#include <linux/io.h>
+
+#include <plat/cpu.h>
+#include <plat/pm.h>
+#include <plat/regs-timer.h>
+
+#include <mach/regs-irq.h>
+#include <mach/regs-clock.h>
+
+static struct sleep_save s5pv210_core_save[] = {
+ /* Clock source */
+ SAVE_ITEM(S5P_CLK_SRC0),
+ SAVE_ITEM(S5P_CLK_SRC1),
+ SAVE_ITEM(S5P_CLK_SRC2),
+ SAVE_ITEM(S5P_CLK_SRC3),
+ SAVE_ITEM(S5P_CLK_SRC4),
+ SAVE_ITEM(S5P_CLK_SRC5),
+ SAVE_ITEM(S5P_CLK_SRC6),
+
+ /* Clock source Mask */
+ SAVE_ITEM(S5P_CLK_SRC_MASK0),
+ SAVE_ITEM(S5P_CLK_SRC_MASK1),
+
+ /* Clock Divider */
+ SAVE_ITEM(S5P_CLK_DIV0),
+ SAVE_ITEM(S5P_CLK_DIV1),
+ SAVE_ITEM(S5P_CLK_DIV2),
+ SAVE_ITEM(S5P_CLK_DIV3),
+ SAVE_ITEM(S5P_CLK_DIV4),
+ SAVE_ITEM(S5P_CLK_DIV5),
+ SAVE_ITEM(S5P_CLK_DIV6),
+ SAVE_ITEM(S5P_CLK_DIV7),
+
+ /* Clock Main Gate */
+ SAVE_ITEM(S5P_CLKGATE_MAIN0),
+ SAVE_ITEM(S5P_CLKGATE_MAIN1),
+ SAVE_ITEM(S5P_CLKGATE_MAIN2),
+
+ /* Clock source Peri Gate */
+ SAVE_ITEM(S5P_CLKGATE_PERI0),
+ SAVE_ITEM(S5P_CLKGATE_PERI1),
+
+ /* Clock source SCLK Gate */
+ SAVE_ITEM(S5P_CLKGATE_SCLK0),
+ SAVE_ITEM(S5P_CLKGATE_SCLK1),
+
+ /* Clock IP Clock gate */
+ SAVE_ITEM(S5P_CLKGATE_IP0),
+ SAVE_ITEM(S5P_CLKGATE_IP1),
+ SAVE_ITEM(S5P_CLKGATE_IP2),
+ SAVE_ITEM(S5P_CLKGATE_IP3),
+ SAVE_ITEM(S5P_CLKGATE_IP4),
+
+ /* Clock Blcok and Bus gate */
+ SAVE_ITEM(S5P_CLKGATE_BLOCK),
+ SAVE_ITEM(S5P_CLKGATE_BUS0),
+
+ /* Clock ETC */
+ SAVE_ITEM(S5P_CLK_OUT),
+ SAVE_ITEM(S5P_MDNIE_SEL),
+
+ /* PWM Register */
+ SAVE_ITEM(S3C2410_TCFG0),
+ SAVE_ITEM(S3C2410_TCFG1),
+ SAVE_ITEM(S3C64XX_TINT_CSTAT),
+ SAVE_ITEM(S3C2410_TCON),
+ SAVE_ITEM(S3C2410_TCNTB(0)),
+ SAVE_ITEM(S3C2410_TCMPB(0)),
+ SAVE_ITEM(S3C2410_TCNTO(0)),
+};
+
+void s5pv210_cpu_suspend(void)
+{
+ unsigned long tmp;
+
+ /* issue the standby signal into the pm unit. Note, we
+ * issue a write-buffer drain just in case */
+
+ tmp = 0;
+
+ asm("b 1f\n\t"
+ ".align 5\n\t"
+ "1:\n\t"
+ "mcr p15, 0, %0, c7, c10, 5\n\t"
+ "mcr p15, 0, %0, c7, c10, 4\n\t"
+ "wfi" : : "r" (tmp));
+
+ /* we should never get past here */
+ panic("sleep resumed to originator?");
+}
+
+static void s5pv210_pm_prepare(void)
+{
+ unsigned int tmp;
+
+ /* ensure at least INFORM0 has the resume address */
+ __raw_writel(virt_to_phys(s3c_cpu_resume), S5P_INFORM0);
+
+ tmp = __raw_readl(S5P_SLEEP_CFG);
+ tmp &= ~(S5P_SLEEP_CFG_OSC_EN | S5P_SLEEP_CFG_USBOSC_EN);
+ __raw_writel(tmp, S5P_SLEEP_CFG);
+
+ /* WFI for SLEEP mode configuration by SYSCON */
+ tmp = __raw_readl(S5P_PWR_CFG);
+ tmp &= S5P_CFG_WFI_CLEAN;
+ tmp |= S5P_CFG_WFI_SLEEP;
+ __raw_writel(tmp, S5P_PWR_CFG);
+
+ /* SYSCON interrupt handling disable */
+ tmp = __raw_readl(S5P_OTHERS);
+ tmp |= S5P_OTHER_SYSC_INTOFF;
+ __raw_writel(tmp, S5P_OTHERS);
+
+ s3c_pm_do_save(s5pv210_core_save, ARRAY_SIZE(s5pv210_core_save));
+}
+
+static int s5pv210_pm_add(struct sys_device *sysdev)
+{
+ pm_cpu_prep = s5pv210_pm_prepare;
+ pm_cpu_sleep = s5pv210_cpu_suspend;
+
+ return 0;
+}
+
+static int s5pv210_pm_resume(struct sys_device *dev)
+{
+ u32 tmp;
+
+ tmp = __raw_readl(S5P_OTHERS);
+ tmp |= (S5P_OTHERS_RET_IO | S5P_OTHERS_RET_CF |\
+ S5P_OTHERS_RET_MMC | S5P_OTHERS_RET_UART);
+ __raw_writel(tmp , S5P_OTHERS);
+
+ s3c_pm_do_restore_core(s5pv210_core_save, ARRAY_SIZE(s5pv210_core_save));
+
+ return 0;
+}
+
+static struct sysdev_driver s5pv210_pm_driver = {
+ .add = s5pv210_pm_add,
+ .resume = s5pv210_pm_resume,
+};
+
+static __init int s5pv210_pm_drvinit(void)
+{
+ return sysdev_driver_register(&s5pv210_sysclass, &s5pv210_pm_driver);
+}
+arch_initcall(s5pv210_pm_drvinit);
#include <mach/regs-clock.h>
#include <plat/gpio-cfg.h>
-void s5pv210_fb_gpio_setup_24bpp(void)
+static void s5pv210_fb_cfg_gpios(unsigned int base, unsigned int nr)
{
- unsigned int gpio = 0;
-
- for (gpio = S5PV210_GPF0(0); gpio <= S5PV210_GPF0(7); gpio++) {
- s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
- s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
- s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
- }
+ s3c_gpio_cfgrange_nopull(base, nr, S3C_GPIO_SFN(2));
- for (gpio = S5PV210_GPF1(0); gpio <= S5PV210_GPF1(7); gpio++) {
- s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
- s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
- s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
- }
+ for (; nr > 0; nr--, base++)
+ s5p_gpio_set_drvstr(base, S5P_GPIO_DRVSTR_LV4);
+}
- for (gpio = S5PV210_GPF2(0); gpio <= S5PV210_GPF2(7); gpio++) {
- s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
- s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
- s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
- }
- for (gpio = S5PV210_GPF3(0); gpio <= S5PV210_GPF3(3); gpio++) {
- s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
- s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
- s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
- }
+void s5pv210_fb_gpio_setup_24bpp(void)
+{
+ s5pv210_fb_cfg_gpios(S5PV210_GPF0(0), 8);
+ s5pv210_fb_cfg_gpios(S5PV210_GPF1(0), 8);
+ s5pv210_fb_cfg_gpios(S5PV210_GPF2(0), 8);
+ s5pv210_fb_cfg_gpios(S5PV210_GPF3(0), 4);
/* Set DISPLAY_CONTROL register for Display path selection.
*
void s3c_i2c0_cfg_gpio(struct platform_device *dev)
{
- s3c_gpio_cfgpin(S5PV210_GPD1(0), S3C_GPIO_SFN(2));
- s3c_gpio_setpull(S5PV210_GPD1(0), S3C_GPIO_PULL_UP);
- s3c_gpio_cfgpin(S5PV210_GPD1(1), S3C_GPIO_SFN(2));
- s3c_gpio_setpull(S5PV210_GPD1(1), S3C_GPIO_PULL_UP);
+ s3c_gpio_cfgall_range(S5PV210_GPD1(0), 2,
+ S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
}
void s3c_i2c1_cfg_gpio(struct platform_device *dev)
{
- s3c_gpio_cfgpin(S5PV210_GPD1(2), S3C_GPIO_SFN(2));
- s3c_gpio_setpull(S5PV210_GPD1(2), S3C_GPIO_PULL_UP);
- s3c_gpio_cfgpin(S5PV210_GPD1(3), S3C_GPIO_SFN(2));
- s3c_gpio_setpull(S5PV210_GPD1(3), S3C_GPIO_PULL_UP);
+ s3c_gpio_cfgall_range(S5PV210_GPD1(2), 2,
+ S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
}
void s3c_i2c2_cfg_gpio(struct platform_device *dev)
{
- s3c_gpio_cfgpin(S5PV210_GPD1(4), S3C_GPIO_SFN(2));
- s3c_gpio_setpull(S5PV210_GPD1(4), S3C_GPIO_PULL_UP);
- s3c_gpio_cfgpin(S5PV210_GPD1(5), S3C_GPIO_SFN(2));
- s3c_gpio_setpull(S5PV210_GPD1(5), S3C_GPIO_PULL_UP);
+ s3c_gpio_cfgall_range(S5PV210_GPD1(4), 2,
+ S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
}
#include <plat/gpio-cfg.h>
+static void s5pv210_ide_cfg_gpios(unsigned int base, unsigned int nr)
+{
+ s3c_gpio_cfgrange_nopull(base, nr, S3C_GPIO_SFN(4));
+
+ for (; nr > 0; nr--, base++)
+ s5p_gpio_set_drvstr(base, S5P_GPIO_DRVSTR_LV4);
+}
+
void s5pv210_ide_setup_gpio(void)
{
- unsigned int gpio = 0;
-
- for (gpio = S5PV210_GPJ0(0); gpio <= S5PV210_GPJ0(7); gpio++) {
- /* CF_Add[0 - 2], CF_IORDY, CF_INTRQ, CF_DMARQ, CF_DMARST,
- CF_DMACK */
- s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(4));
- s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
- s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
- }
-
- for (gpio = S5PV210_GPJ2(0); gpio <= S5PV210_GPJ2(7); gpio++) {
- /*CF_Data[0 - 7] */
- s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(4));
- s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
- s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
- }
-
- for (gpio = S5PV210_GPJ3(0); gpio <= S5PV210_GPJ3(7); gpio++) {
- /* CF_Data[8 - 15] */
- s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(4));
- s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
- s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
- }
-
- for (gpio = S5PV210_GPJ4(0); gpio <= S5PV210_GPJ4(3); gpio++) {
- /* CF_CS0, CF_CS1, CF_IORD, CF_IOWR */
- s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(4));
- s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
- s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
- }
+ /* CF_Add[0 - 2], CF_IORDY, CF_INTRQ, CF_DMARQ, CF_DMARST, CF_DMACK */
+ s5pv210_ide_cfg_gpios(S5PV210_GPJ0(0), 8);
+
+ /* CF_Data[0 - 7] */
+ s5pv210_ide_cfg_gpios(S5PV210_GPJ2(0), 8);
+
+ /* CF_Data[8 - 15] */
+ s5pv210_ide_cfg_gpios(S5PV210_GPJ3(0), 8);
+
+ /* CF_CS0, CF_CS1, CF_IORD, CF_IOWR */
+ s5pv210_ide_cfg_gpios(S5PV210_GPJ4(0), 4);
}
void samsung_keypad_cfg_gpio(unsigned int rows, unsigned int cols)
{
- unsigned int gpio, end;
-
/* Set all the necessary GPH3 pins to special-function 3: KP_ROW[x] */
- end = S5PV210_GPH3(rows);
- for (gpio = S5PV210_GPH3(0); gpio < end; gpio++) {
- s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(3));
- s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
- }
+ s3c_gpio_cfgrange_nopull(S5PV210_GPH3(0), rows, S3C_GPIO_SFN(3));
/* Set all the necessary GPH2 pins to special-function 3: KP_COL[x] */
- end = S5PV210_GPH2(cols);
- for (gpio = S5PV210_GPH2(0); gpio < end; gpio++) {
- s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(3));
- s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
- }
+ s3c_gpio_cfgrange_nopull(S5PV210_GPH2(0), cols, S3C_GPIO_SFN(3));
}
void s5pv210_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width)
{
struct s3c_sdhci_platdata *pdata = dev->dev.platform_data;
- unsigned int gpio;
/* Set all the necessary GPG0/GPG1 pins to special-function 2 */
- for (gpio = S5PV210_GPG0(0); gpio < S5PV210_GPG0(2); gpio++) {
- s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
- s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
- }
+ s3c_gpio_cfgrange_nopull(S5PV210_GPG0(0), 2, S3C_GPIO_SFN(2));
+
switch (width) {
case 8:
/* GPG1[3:6] special-funtion 3 */
- for (gpio = S5PV210_GPG1(3); gpio <= S5PV210_GPG1(6); gpio++) {
- s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(3));
- s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
- }
+ s3c_gpio_cfgrange_nopull(S5PV210_GPG1(3), 4, S3C_GPIO_SFN(3));
case 4:
/* GPG0[3:6] special-funtion 2 */
- for (gpio = S5PV210_GPG0(3); gpio <= S5PV210_GPG0(6); gpio++) {
- s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
- s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
- }
+ s3c_gpio_cfgrange_nopull(S5PV210_GPG0(3), 4, S3C_GPIO_SFN(2));
default:
break;
}
void s5pv210_setup_sdhci1_cfg_gpio(struct platform_device *dev, int width)
{
struct s3c_sdhci_platdata *pdata = dev->dev.platform_data;
- unsigned int gpio;
/* Set all the necessary GPG1[0:1] pins to special-function 2 */
- for (gpio = S5PV210_GPG1(0); gpio < S5PV210_GPG1(2); gpio++) {
- s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
- s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
- }
+ s3c_gpio_cfgrange_nopull(S5PV210_GPG1(0), 2, S3C_GPIO_SFN(2));
/* Data pin GPG1[3:6] to special-function 2 */
- for (gpio = S5PV210_GPG1(3); gpio <= S5PV210_GPG1(6); gpio++) {
- s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
- s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
- }
+ s3c_gpio_cfgrange_nopull(S5PV210_GPG1(3), 4, S3C_GPIO_SFN(2));
if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) {
s3c_gpio_setpull(S5PV210_GPG1(2), S3C_GPIO_PULL_UP);
void s5pv210_setup_sdhci2_cfg_gpio(struct platform_device *dev, int width)
{
struct s3c_sdhci_platdata *pdata = dev->dev.platform_data;
- unsigned int gpio;
/* Set all the necessary GPG2[0:1] pins to special-function 2 */
- for (gpio = S5PV210_GPG2(0); gpio < S5PV210_GPG2(2); gpio++) {
- s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
- s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
- }
+ s3c_gpio_cfgrange_nopull(S5PV210_GPG2(0), 2, S3C_GPIO_SFN(2));
switch (width) {
case 8:
/* Data pin GPG3[3:6] to special-function 3 */
- for (gpio = S5PV210_GPG3(3); gpio <= S5PV210_GPG3(6); gpio++) {
- s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(3));
- s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
- }
+ s3c_gpio_cfgrange_nopull(S5PV210_GPG3(3), 4, S3C_GPIO_SFN(3));
case 4:
/* Data pin GPG2[3:6] to special-function 2 */
- for (gpio = S5PV210_GPG2(3); gpio <= S5PV210_GPG2(6); gpio++) {
- s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
- s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
- }
+ s3c_gpio_cfgrange_nopull(S5PV210_GPG2(3), 4, S3C_GPIO_SFN(2));
default:
break;
}
void s5pv210_setup_sdhci3_cfg_gpio(struct platform_device *dev, int width)
{
struct s3c_sdhci_platdata *pdata = dev->dev.platform_data;
- unsigned int gpio;
- /* Set all the necessary GPG3[0:2] pins to special-function 2 */
- for (gpio = S5PV210_GPG3(0); gpio < S5PV210_GPG3(2); gpio++) {
- s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
- s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
- }
+ /* Set all the necessary GPG3[0:1] pins to special-function 2 */
+ s3c_gpio_cfgrange_nopull(S5PV210_GPG3(0), 2, S3C_GPIO_SFN(2));
/* Data pin GPG3[3:6] to special-function 2 */
- for (gpio = S5PV210_GPG3(3); gpio <= S5PV210_GPG3(6); gpio++) {
- s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
- s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
- }
+ s3c_gpio_cfgrange_nopull(S5PV210_GPG3(3), 4, S3C_GPIO_SFN(2));
if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) {
s3c_gpio_setpull(S5PV210_GPG3(2), S3C_GPIO_PULL_UP);
--- /dev/null
+/* linux/arch/arm/plat-s5p/sleep.S
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * S5PV210 power Manager (Suspend-To-RAM) support
+ * Based on S3C2410 sleep code by:
+ * Ben Dooks, (c) 2004 Simtec Electronics
+ *
+ * Based on PXA/SA1100 sleep code by:
+ * Nicolas Pitre, (c) 2002 Monta Vista Software Inc
+ * Cliff Brake, (c) 2001
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+*/
+
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+#include <asm/memory.h>
+
+ .text
+
+ /* s3c_cpu_save
+ *
+ * entry:
+ * r0 = save address (virtual addr of s3c_sleep_save_phys)
+ */
+
+ENTRY(s3c_cpu_save)
+
+ stmfd sp!, { r3 - r12, lr }
+
+ mrc p15, 0, r4, c13, c0, 0 @ FCSE/PID
+ mrc p15, 0, r5, c3, c0, 0 @ Domain ID
+ mrc p15, 0, r6, c2, c0, 0 @ Translation Table BASE0
+ mrc p15, 0, r7, c2, c0, 1 @ Translation Table BASE1
+ mrc p15, 0, r8, c2, c0, 2 @ Translation Table Control
+ mrc p15, 0, r9, c1, c0, 0 @ Control register
+ mrc p15, 0, r10, c1, c0, 1 @ Auxiliary control register
+ mrc p15, 0, r11, c1, c0, 2 @ Co-processor access controls
+ mrc p15, 0, r12, c10, c2, 0 @ Read PRRR
+ mrc p15, 0, r3, c10, c2, 1 @ READ NMRR
+
+ stmia r0, { r3 - r13 }
+
+ bl s3c_pm_cb_flushcache
+
+ ldr r0, =pm_cpu_sleep
+ ldr r0, [ r0 ]
+ mov pc, r0
+
+resume_with_mmu:
+ /*
+ * After MMU is turned on, restore the previous MMU table.
+ */
+ ldr r9 , =(PAGE_OFFSET - PHYS_OFFSET)
+ add r4, r4, r9
+ str r12, [r4]
+
+ ldmfd sp!, { r3 - r12, pc }
+
+ .ltorg
+
+ .data
+
+ .global s3c_sleep_save_phys
+s3c_sleep_save_phys:
+ .word 0
+
+ /* sleep magic, to allow the bootloader to check for an valid
+ * image to resume to. Must be the first word before the
+ * s3c_cpu_resume entry.
+ */
+
+ .word 0x2bedf00d
+
+ /* s3c_cpu_resume
+ *
+ * resume code entry for bootloader to call
+ *
+ * we must put this code here in the data segment as we have no
+ * other way of restoring the stack pointer after sleep, and we
+ * must not write to the code segment (code is read-only)
+ */
+
+ENTRY(s3c_cpu_resume)
+ mov r0, #PSR_I_BIT | PSR_F_BIT | SVC_MODE
+ msr cpsr_c, r0
+
+ mov r1, #0
+ mcr p15, 0, r1, c8, c7, 0 @ invalidate TLBs
+ mcr p15, 0, r1, c7, c5, 0 @ invalidate I Cache
+
+ ldr r0, s3c_sleep_save_phys @ address of restore block
+ ldmia r0, { r3 - r13 }
+
+ mcr p15, 0, r4, c13, c0, 0 @ FCSE/PID
+ mcr p15, 0, r5, c3, c0, 0 @ Domain ID
+
+ mcr p15, 0, r8, c2, c0, 2 @ Translation Table Control
+ mcr p15, 0, r7, c2, c0, 1 @ Translation Table BASE1
+ mcr p15, 0, r6, c2, c0, 0 @ Translation Table BASE0
+
+ mcr p15, 0, r10, c1, c0, 1 @ Auxiliary control register
+
+ mov r0, #0
+ mcr p15, 0, r0, c8, c7, 0 @ Invalidate I & D TLB
+
+ mov r0, #0 @ restore copro access
+ mcr p15, 0, r11, c1, c0, 2 @ Co-processor access
+ mcr p15, 0, r0, c7, c5, 4
+
+ mcr p15, 0, r12, c10, c2, 0 @ write PRRR
+ mcr p15, 0, r3, c10, c2, 1 @ write NMRR
+
+ /*
+ * In Cortex-A8, when MMU is turned on, the pipeline is flushed.
+ * And there are no valid entries in the MMU table at this point.
+ * So before turning on the MMU, the MMU entry for the DRAM address
+ * range is added. After the MMU is turned on, the other entries
+ * in the MMU table will be restored.
+ */
+
+ /* r6 = Translation Table BASE0 */
+ mov r4, r6
+ mov r4, r4, LSR #14
+ mov r4, r4, LSL #14
+
+ /* Load address for adding to MMU table list */
+ ldr r11, =0xE010F000 @ INFORM0 reg.
+ ldr r10, [r11, #0]
+ mov r10, r10, LSR #18
+ bic r10, r10, #0x3
+ orr r4, r4, r10
+
+ /* Calculate MMU table entry */
+ mov r10, r10, LSL #18
+ ldr r5, =0x40E
+ orr r10, r10, r5
+
+ /* Back up originally data */
+ ldr r12, [r4]
+
+ /* Add calculated MMU table entry into MMU table list */
+ str r10, [r4]
+
+ ldr r2, =resume_with_mmu
+ mcr p15, 0, r9, c1, c0, 0 @ turn on MMU, etc
+
+ nop
+ nop
+ nop
+ nop
+ nop @ second-to-last before mmu
+
+ mov pc, r2 @ go back to virtual address
+
+ .ltorg
config CPU_S5PV310
bool
- select PLAT_S5P
help
Enable S5PV310 CPU support
help
Common setup code for i2c bus 2.
+config S5PV310_SETUP_I2C3
+ bool
+ help
+ Common setup code for i2c bus 3.
+
+config S5PV310_SETUP_I2C4
+ bool
+ help
+ Common setup code for i2c bus 4.
+
+config S5PV310_SETUP_I2C5
+ bool
+ help
+ Common setup code for i2c bus 5.
+
+config S5PV310_SETUP_I2C6
+ bool
+ help
+ Common setup code for i2c bus 6.
+
+config S5PV310_SETUP_I2C7
+ bool
+ help
+ Common setup code for i2c bus 7.
+
+config S5PV310_SETUP_SDHCI
+ bool
+ select S5PV310_SETUP_SDHCI_GPIO
+ help
+ Internal helper functions for S5PV310 based SDHCI systems.
+
+config S5PV310_SETUP_SDHCI_GPIO
+ bool
+ help
+ Common setup code for SDHCI gpio.
+
# machine support
-config MACH_SMDKV310
- bool "SMDKV310"
+menu "S5PC210 Machines"
+
+config MACH_SMDKC210
+ bool "SMDKC210"
select CPU_S5PV310
- select ARCH_SPARSEMEM_ENABLE
+ select S3C_DEV_RTC
+ select S3C_DEV_WDT
+ select S3C_DEV_HSMMC
+ select S3C_DEV_HSMMC1
+ select S3C_DEV_HSMMC2
+ select S3C_DEV_HSMMC3
+ select S5PV310_SETUP_SDHCI
help
- Machine support for Samsung SMDKV310
+ Machine support for Samsung SMDKC210
+ S5PC210(MCP) is one of package option of S5PV310
config MACH_UNIVERSAL_C210
bool "Mobile UNIVERSAL_C210 Board"
select CPU_S5PV310
- select ARCH_SPARSEMEM_ENABLE
+ select S5P_DEV_ONENAND
+ select S3C_DEV_I2C1
+ select S5PV310_SETUP_I2C1
help
Machine support for Samsung Mobile Universal S5PC210 Reference
Board. S5PC210(MCP) is one of package option of S5PV310
+endmenu
+
+menu "S5PV310 Machines"
+
+config MACH_SMDKV310
+ bool "SMDKV310"
+ select CPU_S5PV310
+ select S3C_DEV_RTC
+ select S3C_DEV_WDT
+ select S3C_DEV_HSMMC
+ select S3C_DEV_HSMMC1
+ select S3C_DEV_HSMMC2
+ select S3C_DEV_HSMMC3
+ select S5PV310_SETUP_SDHCI
+ help
+ Machine support for Samsung SMDKV310
+
+endmenu
+
+comment "Configuration for HSMMC bus width"
+
+menu "Use 8-bit bus width"
+
+config S5PV310_SDHCI_CH0_8BIT
+ bool "Channel 0 with 8-bit bus"
+ help
+ Support HSMMC Channel 0 8-bit bus.
+ If selected, Channel 1 is disabled.
+
+config S5PV310_SDHCI_CH2_8BIT
+ bool "Channel 2 with 8-bit bus"
+ help
+ Support HSMMC Channel 2 8-bit bus.
+ If selected, Channel 3 is disabled.
+
+endmenu
+
endif
# Core support for S5PV310 system
obj-$(CONFIG_CPU_S5PV310) += cpu.o init.o clock.o irq-combiner.o
-obj-$(CONFIG_CPU_S5PV310) += setup-i2c0.o time.o
+obj-$(CONFIG_CPU_S5PV310) += setup-i2c0.o time.o gpiolib.o irq-eint.o
obj-$(CONFIG_SMP) += platsmp.o headsmp.o
obj-$(CONFIG_LOCAL_TIMERS) += localtimer.o
# machine support
+obj-$(CONFIG_MACH_SMDKC210) += mach-smdkc210.o
obj-$(CONFIG_MACH_SMDKV310) += mach-smdkv310.o
obj-$(CONFIG_MACH_UNIVERSAL_C210) += mach-universal_c210.o
obj-$(CONFIG_S5PV310_SETUP_I2C1) += setup-i2c1.o
obj-$(CONFIG_S5PV310_SETUP_I2C2) += setup-i2c2.o
+obj-$(CONFIG_S5PV310_SETUP_I2C3) += setup-i2c3.o
+obj-$(CONFIG_S5PV310_SETUP_I2C4) += setup-i2c4.o
+obj-$(CONFIG_S5PV310_SETUP_I2C5) += setup-i2c5.o
+obj-$(CONFIG_S5PV310_SETUP_I2C6) += setup-i2c6.o
+obj-$(CONFIG_S5PV310_SETUP_I2C7) += setup-i2c7.o
+obj-$(CONFIG_S5PV310_SETUP_SDHCI) += setup-sdhci.o
+obj-$(CONFIG_S5PV310_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o
.rate = 27000000,
};
+static struct clk clk_sclk_hdmiphy = {
+ .name = "sclk_hdmiphy",
+ .id = -1,
+};
+
+static struct clk clk_sclk_usbphy0 = {
+ .name = "sclk_usbphy0",
+ .id = -1,
+ .rate = 27000000,
+};
+
+static struct clk clk_sclk_usbphy1 = {
+ .name = "sclk_usbphy1",
+ .id = -1,
+};
+
+static int s5pv310_clksrc_mask_top_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(S5P_CLKSRC_MASK_TOP, clk, enable);
+}
+
+static int s5pv310_clksrc_mask_cam_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(S5P_CLKSRC_MASK_CAM, clk, enable);
+}
+
+static int s5pv310_clksrc_mask_lcd0_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(S5P_CLKSRC_MASK_LCD0, clk, enable);
+}
+
+static int s5pv310_clksrc_mask_lcd1_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(S5P_CLKSRC_MASK_LCD1, clk, enable);
+}
+
+static int s5pv310_clksrc_mask_fsys_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(S5P_CLKSRC_MASK_FSYS, clk, enable);
+}
+
static int s5pv310_clksrc_mask_peril0_ctrl(struct clk *clk, int enable)
{
return s5p_gatectrl(S5P_CLKSRC_MASK_PERIL0, clk, enable);
}
+static int s5pv310_clksrc_mask_peril1_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(S5P_CLKSRC_MASK_PERIL1, clk, enable);
+}
+
+static int s5pv310_clk_ip_cam_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(S5P_CLKGATE_IP_CAM, clk, enable);
+}
+
+static int s5pv310_clk_ip_image_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(S5P_CLKGATE_IP_IMAGE, clk, enable);
+}
+
+static int s5pv310_clk_ip_lcd0_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(S5P_CLKGATE_IP_LCD0, clk, enable);
+}
+
+static int s5pv310_clk_ip_lcd1_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(S5P_CLKGATE_IP_LCD1, clk, enable);
+}
+
+static int s5pv310_clk_ip_fsys_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(S5P_CLKGATE_IP_FSYS, clk, enable);
+}
+
static int s5pv310_clk_ip_peril_ctrl(struct clk *clk, int enable)
{
return s5p_gatectrl(S5P_CLKGATE_IP_PERIL, clk, enable);
}
+static int s5pv310_clk_ip_perir_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(S5P_CLKGATE_IP_PERIR, clk, enable);
+}
+
/* Core list of CMU_CPU side */
static struct clksrc_clk clk_mout_apll = {
};
static struct clk *clkset_moutcore_list[] = {
- [0] = &clk_sclk_apll.clk,
+ [0] = &clk_mout_apll.clk,
[1] = &clk_mout_mpll.clk,
};
.reg_div = { .reg = S5P_CLKDIV_CPU, .shift = 12, .size = 3 },
};
-static struct clksrc_clk clk_atclk = {
- .clk = {
- .name = "atclk",
- .id = -1,
- .parent = &clk_moutcore.clk,
- },
- .reg_div = { .reg = S5P_CLKDIV_CPU, .shift = 16, .size = 3 },
-};
-
-static struct clksrc_clk clk_pclk_dbg = {
- .clk = {
- .name = "pclk_dbg",
- .id = -1,
- .parent = &clk_atclk.clk,
- },
- .reg_div = { .reg = S5P_CLKDIV_CPU, .shift = 20, .size = 3 },
-};
-
/* Core list of CMU_CORE side */
static struct clk *clkset_corebus_list[] = {
[1] = &clk_sclk_apll.clk,
};
-static struct clksrc_sources clkset_aclk_200 = {
+static struct clksrc_sources clkset_aclk = {
.sources = clkset_aclk_top_list,
.nr_sources = ARRAY_SIZE(clkset_aclk_top_list),
};
.name = "aclk_200",
.id = -1,
},
- .sources = &clkset_aclk_200,
+ .sources = &clkset_aclk,
.reg_src = { .reg = S5P_CLKSRC_TOP0, .shift = 12, .size = 1 },
.reg_div = { .reg = S5P_CLKDIV_TOP, .shift = 0, .size = 3 },
};
-static struct clksrc_sources clkset_aclk_100 = {
- .sources = clkset_aclk_top_list,
- .nr_sources = ARRAY_SIZE(clkset_aclk_top_list),
-};
-
static struct clksrc_clk clk_aclk_100 = {
.clk = {
.name = "aclk_100",
.id = -1,
},
- .sources = &clkset_aclk_100,
+ .sources = &clkset_aclk,
.reg_src = { .reg = S5P_CLKSRC_TOP0, .shift = 16, .size = 1 },
.reg_div = { .reg = S5P_CLKDIV_TOP, .shift = 4, .size = 4 },
};
-static struct clksrc_sources clkset_aclk_160 = {
- .sources = clkset_aclk_top_list,
- .nr_sources = ARRAY_SIZE(clkset_aclk_top_list),
-};
-
static struct clksrc_clk clk_aclk_160 = {
.clk = {
.name = "aclk_160",
.id = -1,
},
- .sources = &clkset_aclk_160,
+ .sources = &clkset_aclk,
.reg_src = { .reg = S5P_CLKSRC_TOP0, .shift = 20, .size = 1 },
.reg_div = { .reg = S5P_CLKDIV_TOP, .shift = 8, .size = 3 },
};
-static struct clksrc_sources clkset_aclk_133 = {
- .sources = clkset_aclk_top_list,
- .nr_sources = ARRAY_SIZE(clkset_aclk_top_list),
-};
-
static struct clksrc_clk clk_aclk_133 = {
.clk = {
.name = "aclk_133",
.id = -1,
},
- .sources = &clkset_aclk_133,
+ .sources = &clkset_aclk,
.reg_src = { .reg = S5P_CLKSRC_TOP0, .shift = 24, .size = 1 },
.reg_div = { .reg = S5P_CLKDIV_TOP, .shift = 12, .size = 3 },
};
.clk = {
.name = "vpll_src",
.id = -1,
+ .enable = s5pv310_clksrc_mask_top_ctrl,
+ .ctrlbit = (1 << 0),
},
.sources = &clkset_vpllsrc,
.reg_src = { .reg = S5P_CLKSRC_TOP1, .shift = 0, .size = 1 },
.parent = &clk_aclk_100.clk,
.enable = s5pv310_clk_ip_peril_ctrl,
.ctrlbit = (1<<24),
- }
+ }, {
+ .name = "csis",
+ .id = 0,
+ .enable = s5pv310_clk_ip_cam_ctrl,
+ .ctrlbit = (1 << 4),
+ }, {
+ .name = "csis",
+ .id = 1,
+ .enable = s5pv310_clk_ip_cam_ctrl,
+ .ctrlbit = (1 << 5),
+ }, {
+ .name = "fimc",
+ .id = 0,
+ .enable = s5pv310_clk_ip_cam_ctrl,
+ .ctrlbit = (1 << 0),
+ }, {
+ .name = "fimc",
+ .id = 1,
+ .enable = s5pv310_clk_ip_cam_ctrl,
+ .ctrlbit = (1 << 1),
+ }, {
+ .name = "fimc",
+ .id = 2,
+ .enable = s5pv310_clk_ip_cam_ctrl,
+ .ctrlbit = (1 << 2),
+ }, {
+ .name = "fimc",
+ .id = 3,
+ .enable = s5pv310_clk_ip_cam_ctrl,
+ .ctrlbit = (1 << 3),
+ }, {
+ .name = "fimd",
+ .id = 0,
+ .enable = s5pv310_clk_ip_lcd0_ctrl,
+ .ctrlbit = (1 << 0),
+ }, {
+ .name = "fimd",
+ .id = 1,
+ .enable = s5pv310_clk_ip_lcd1_ctrl,
+ .ctrlbit = (1 << 0),
+ }, {
+ .name = "hsmmc",
+ .id = 0,
+ .parent = &clk_aclk_133.clk,
+ .enable = s5pv310_clk_ip_fsys_ctrl,
+ .ctrlbit = (1 << 5),
+ }, {
+ .name = "hsmmc",
+ .id = 1,
+ .parent = &clk_aclk_133.clk,
+ .enable = s5pv310_clk_ip_fsys_ctrl,
+ .ctrlbit = (1 << 6),
+ }, {
+ .name = "hsmmc",
+ .id = 2,
+ .parent = &clk_aclk_133.clk,
+ .enable = s5pv310_clk_ip_fsys_ctrl,
+ .ctrlbit = (1 << 7),
+ }, {
+ .name = "hsmmc",
+ .id = 3,
+ .parent = &clk_aclk_133.clk,
+ .enable = s5pv310_clk_ip_fsys_ctrl,
+ .ctrlbit = (1 << 8),
+ }, {
+ .name = "hsmmc",
+ .id = 4,
+ .parent = &clk_aclk_133.clk,
+ .enable = s5pv310_clk_ip_fsys_ctrl,
+ .ctrlbit = (1 << 9),
+ }, {
+ .name = "sata",
+ .id = -1,
+ .enable = s5pv310_clk_ip_fsys_ctrl,
+ .ctrlbit = (1 << 10),
+ }, {
+ .name = "adc",
+ .id = -1,
+ .enable = s5pv310_clk_ip_peril_ctrl,
+ .ctrlbit = (1 << 15),
+ }, {
+ .name = "rtc",
+ .id = -1,
+ .enable = s5pv310_clk_ip_perir_ctrl,
+ .ctrlbit = (1 << 15),
+ }, {
+ .name = "watchdog",
+ .id = -1,
+ .enable = s5pv310_clk_ip_perir_ctrl,
+ .ctrlbit = (1 << 14),
+ }, {
+ .name = "usbhost",
+ .id = -1,
+ .enable = s5pv310_clk_ip_fsys_ctrl ,
+ .ctrlbit = (1 << 12),
+ }, {
+ .name = "otg",
+ .id = -1,
+ .enable = s5pv310_clk_ip_fsys_ctrl,
+ .ctrlbit = (1 << 13),
+ }, {
+ .name = "spi",
+ .id = 0,
+ .enable = s5pv310_clk_ip_peril_ctrl,
+ .ctrlbit = (1 << 16),
+ }, {
+ .name = "spi",
+ .id = 1,
+ .enable = s5pv310_clk_ip_peril_ctrl,
+ .ctrlbit = (1 << 17),
+ }, {
+ .name = "spi",
+ .id = 2,
+ .enable = s5pv310_clk_ip_peril_ctrl,
+ .ctrlbit = (1 << 18),
+ }, {
+ .name = "fimg2d",
+ .id = -1,
+ .enable = s5pv310_clk_ip_image_ctrl,
+ .ctrlbit = (1 << 0),
+ }, {
+ .name = "i2c",
+ .id = 0,
+ .parent = &clk_aclk_100.clk,
+ .enable = s5pv310_clk_ip_peril_ctrl,
+ .ctrlbit = (1 << 6),
+ }, {
+ .name = "i2c",
+ .id = 1,
+ .parent = &clk_aclk_100.clk,
+ .enable = s5pv310_clk_ip_peril_ctrl,
+ .ctrlbit = (1 << 7),
+ }, {
+ .name = "i2c",
+ .id = 2,
+ .parent = &clk_aclk_100.clk,
+ .enable = s5pv310_clk_ip_peril_ctrl,
+ .ctrlbit = (1 << 8),
+ }, {
+ .name = "i2c",
+ .id = 3,
+ .parent = &clk_aclk_100.clk,
+ .enable = s5pv310_clk_ip_peril_ctrl,
+ .ctrlbit = (1 << 9),
+ }, {
+ .name = "i2c",
+ .id = 4,
+ .parent = &clk_aclk_100.clk,
+ .enable = s5pv310_clk_ip_peril_ctrl,
+ .ctrlbit = (1 << 10),
+ }, {
+ .name = "i2c",
+ .id = 5,
+ .parent = &clk_aclk_100.clk,
+ .enable = s5pv310_clk_ip_peril_ctrl,
+ .ctrlbit = (1 << 11),
+ }, {
+ .name = "i2c",
+ .id = 6,
+ .parent = &clk_aclk_100.clk,
+ .enable = s5pv310_clk_ip_peril_ctrl,
+ .ctrlbit = (1 << 12),
+ }, {
+ .name = "i2c",
+ .id = 7,
+ .parent = &clk_aclk_100.clk,
+ .enable = s5pv310_clk_ip_peril_ctrl,
+ .ctrlbit = (1 << 13),
+ },
};
static struct clk init_clocks[] = {
[0] = &clk_ext_xtal_mux,
[1] = &clk_xusbxti,
[2] = &clk_sclk_hdmi27m,
+ [3] = &clk_sclk_usbphy0,
+ [4] = &clk_sclk_usbphy1,
+ [5] = &clk_sclk_hdmiphy,
[6] = &clk_mout_mpll.clk,
[7] = &clk_mout_epll.clk,
[8] = &clk_sclk_vpll.clk,
.nr_sources = ARRAY_SIZE(clkset_group_list),
};
+static struct clk *clkset_mout_g2d0_list[] = {
+ [0] = &clk_mout_mpll.clk,
+ [1] = &clk_sclk_apll.clk,
+};
+
+static struct clksrc_sources clkset_mout_g2d0 = {
+ .sources = clkset_mout_g2d0_list,
+ .nr_sources = ARRAY_SIZE(clkset_mout_g2d0_list),
+};
+
+static struct clksrc_clk clk_mout_g2d0 = {
+ .clk = {
+ .name = "mout_g2d0",
+ .id = -1,
+ },
+ .sources = &clkset_mout_g2d0,
+ .reg_src = { .reg = S5P_CLKSRC_IMAGE, .shift = 0, .size = 1 },
+};
+
+static struct clk *clkset_mout_g2d1_list[] = {
+ [0] = &clk_mout_epll.clk,
+ [1] = &clk_sclk_vpll.clk,
+};
+
+static struct clksrc_sources clkset_mout_g2d1 = {
+ .sources = clkset_mout_g2d1_list,
+ .nr_sources = ARRAY_SIZE(clkset_mout_g2d1_list),
+};
+
+static struct clksrc_clk clk_mout_g2d1 = {
+ .clk = {
+ .name = "mout_g2d1",
+ .id = -1,
+ },
+ .sources = &clkset_mout_g2d1,
+ .reg_src = { .reg = S5P_CLKSRC_IMAGE, .shift = 4, .size = 1 },
+};
+
+static struct clk *clkset_mout_g2d_list[] = {
+ [0] = &clk_mout_g2d0.clk,
+ [1] = &clk_mout_g2d1.clk,
+};
+
+static struct clksrc_sources clkset_mout_g2d = {
+ .sources = clkset_mout_g2d_list,
+ .nr_sources = ARRAY_SIZE(clkset_mout_g2d_list),
+};
+
+static struct clksrc_clk clk_dout_mmc0 = {
+ .clk = {
+ .name = "dout_mmc0",
+ .id = -1,
+ },
+ .sources = &clkset_group,
+ .reg_src = { .reg = S5P_CLKSRC_FSYS, .shift = 0, .size = 4 },
+ .reg_div = { .reg = S5P_CLKDIV_FSYS1, .shift = 0, .size = 4 },
+};
+
+static struct clksrc_clk clk_dout_mmc1 = {
+ .clk = {
+ .name = "dout_mmc1",
+ .id = -1,
+ },
+ .sources = &clkset_group,
+ .reg_src = { .reg = S5P_CLKSRC_FSYS, .shift = 4, .size = 4 },
+ .reg_div = { .reg = S5P_CLKDIV_FSYS1, .shift = 16, .size = 4 },
+};
+
+static struct clksrc_clk clk_dout_mmc2 = {
+ .clk = {
+ .name = "dout_mmc2",
+ .id = -1,
+ },
+ .sources = &clkset_group,
+ .reg_src = { .reg = S5P_CLKSRC_FSYS, .shift = 8, .size = 4 },
+ .reg_div = { .reg = S5P_CLKDIV_FSYS2, .shift = 0, .size = 4 },
+};
+
+static struct clksrc_clk clk_dout_mmc3 = {
+ .clk = {
+ .name = "dout_mmc3",
+ .id = -1,
+ },
+ .sources = &clkset_group,
+ .reg_src = { .reg = S5P_CLKSRC_FSYS, .shift = 12, .size = 4 },
+ .reg_div = { .reg = S5P_CLKDIV_FSYS2, .shift = 16, .size = 4 },
+};
+
+static struct clksrc_clk clk_dout_mmc4 = {
+ .clk = {
+ .name = "dout_mmc4",
+ .id = -1,
+ },
+ .sources = &clkset_group,
+ .reg_src = { .reg = S5P_CLKSRC_FSYS, .shift = 16, .size = 4 },
+ .reg_div = { .reg = S5P_CLKDIV_FSYS3, .shift = 0, .size = 4 },
+};
+
static struct clksrc_clk clksrcs[] = {
{
.clk = {
.sources = &clkset_group,
.reg_src = { .reg = S5P_CLKSRC_PERIL0, .shift = 24, .size = 4 },
.reg_div = { .reg = S5P_CLKDIV_PERIL3, .shift = 0, .size = 4 },
- },
+ }, {
+ .clk = {
+ .name = "sclk_csis",
+ .id = 0,
+ .enable = s5pv310_clksrc_mask_cam_ctrl,
+ .ctrlbit = (1 << 24),
+ },
+ .sources = &clkset_group,
+ .reg_src = { .reg = S5P_CLKSRC_CAM, .shift = 24, .size = 4 },
+ .reg_div = { .reg = S5P_CLKDIV_CAM, .shift = 24, .size = 4 },
+ }, {
+ .clk = {
+ .name = "sclk_csis",
+ .id = 1,
+ .enable = s5pv310_clksrc_mask_cam_ctrl,
+ .ctrlbit = (1 << 28),
+ },
+ .sources = &clkset_group,
+ .reg_src = { .reg = S5P_CLKSRC_CAM, .shift = 28, .size = 4 },
+ .reg_div = { .reg = S5P_CLKDIV_CAM, .shift = 28, .size = 4 },
+ }, {
+ .clk = {
+ .name = "sclk_cam",
+ .id = 0,
+ .enable = s5pv310_clksrc_mask_cam_ctrl,
+ .ctrlbit = (1 << 16),
+ },
+ .sources = &clkset_group,
+ .reg_src = { .reg = S5P_CLKSRC_CAM, .shift = 16, .size = 4 },
+ .reg_div = { .reg = S5P_CLKDIV_CAM, .shift = 16, .size = 4 },
+ }, {
+ .clk = {
+ .name = "sclk_cam",
+ .id = 1,
+ .enable = s5pv310_clksrc_mask_cam_ctrl,
+ .ctrlbit = (1 << 20),
+ },
+ .sources = &clkset_group,
+ .reg_src = { .reg = S5P_CLKSRC_CAM, .shift = 20, .size = 4 },
+ .reg_div = { .reg = S5P_CLKDIV_CAM, .shift = 20, .size = 4 },
+ }, {
+ .clk = {
+ .name = "sclk_fimc",
+ .id = 0,
+ .enable = s5pv310_clksrc_mask_cam_ctrl,
+ .ctrlbit = (1 << 0),
+ },
+ .sources = &clkset_group,
+ .reg_src = { .reg = S5P_CLKSRC_CAM, .shift = 0, .size = 4 },
+ .reg_div = { .reg = S5P_CLKDIV_CAM, .shift = 0, .size = 4 },
+ }, {
+ .clk = {
+ .name = "sclk_fimc",
+ .id = 1,
+ .enable = s5pv310_clksrc_mask_cam_ctrl,
+ .ctrlbit = (1 << 4),
+ },
+ .sources = &clkset_group,
+ .reg_src = { .reg = S5P_CLKSRC_CAM, .shift = 4, .size = 4 },
+ .reg_div = { .reg = S5P_CLKDIV_CAM, .shift = 4, .size = 4 },
+ }, {
+ .clk = {
+ .name = "sclk_fimc",
+ .id = 2,
+ .enable = s5pv310_clksrc_mask_cam_ctrl,
+ .ctrlbit = (1 << 8),
+ },
+ .sources = &clkset_group,
+ .reg_src = { .reg = S5P_CLKSRC_CAM, .shift = 8, .size = 4 },
+ .reg_div = { .reg = S5P_CLKDIV_CAM, .shift = 8, .size = 4 },
+ }, {
+ .clk = {
+ .name = "sclk_fimc",
+ .id = 3,
+ .enable = s5pv310_clksrc_mask_cam_ctrl,
+ .ctrlbit = (1 << 12),
+ },
+ .sources = &clkset_group,
+ .reg_src = { .reg = S5P_CLKSRC_CAM, .shift = 12, .size = 4 },
+ .reg_div = { .reg = S5P_CLKDIV_CAM, .shift = 12, .size = 4 },
+ }, {
+ .clk = {
+ .name = "sclk_fimd",
+ .id = 0,
+ .enable = s5pv310_clksrc_mask_lcd0_ctrl,
+ .ctrlbit = (1 << 0),
+ },
+ .sources = &clkset_group,
+ .reg_src = { .reg = S5P_CLKSRC_LCD0, .shift = 0, .size = 4 },
+ .reg_div = { .reg = S5P_CLKDIV_LCD0, .shift = 0, .size = 4 },
+ }, {
+ .clk = {
+ .name = "sclk_fimd",
+ .id = 1,
+ .enable = s5pv310_clksrc_mask_lcd1_ctrl,
+ .ctrlbit = (1 << 0),
+ },
+ .sources = &clkset_group,
+ .reg_src = { .reg = S5P_CLKSRC_LCD1, .shift = 0, .size = 4 },
+ .reg_div = { .reg = S5P_CLKDIV_LCD1, .shift = 0, .size = 4 },
+ }, {
+ .clk = {
+ .name = "sclk_sata",
+ .id = -1,
+ .enable = s5pv310_clksrc_mask_fsys_ctrl,
+ .ctrlbit = (1 << 24),
+ },
+ .sources = &clkset_mout_corebus,
+ .reg_src = { .reg = S5P_CLKSRC_FSYS, .shift = 24, .size = 1 },
+ .reg_div = { .reg = S5P_CLKDIV_FSYS0, .shift = 20, .size = 4 },
+ }, {
+ .clk = {
+ .name = "sclk_spi",
+ .id = 0,
+ .enable = s5pv310_clksrc_mask_peril1_ctrl,
+ .ctrlbit = (1 << 16),
+ },
+ .sources = &clkset_group,
+ .reg_src = { .reg = S5P_CLKSRC_PERIL1, .shift = 16, .size = 4 },
+ .reg_div = { .reg = S5P_CLKDIV_PERIL1, .shift = 0, .size = 4 },
+ }, {
+ .clk = {
+ .name = "sclk_spi",
+ .id = 1,
+ .enable = s5pv310_clksrc_mask_peril1_ctrl,
+ .ctrlbit = (1 << 20),
+ },
+ .sources = &clkset_group,
+ .reg_src = { .reg = S5P_CLKSRC_PERIL1, .shift = 20, .size = 4 },
+ .reg_div = { .reg = S5P_CLKDIV_PERIL1, .shift = 16, .size = 4 },
+ }, {
+ .clk = {
+ .name = "sclk_spi",
+ .id = 2,
+ .enable = s5pv310_clksrc_mask_peril1_ctrl,
+ .ctrlbit = (1 << 24),
+ },
+ .sources = &clkset_group,
+ .reg_src = { .reg = S5P_CLKSRC_PERIL1, .shift = 24, .size = 4 },
+ .reg_div = { .reg = S5P_CLKDIV_PERIL2, .shift = 0, .size = 4 },
+ }, {
+ .clk = {
+ .name = "sclk_fimg2d",
+ .id = -1,
+ },
+ .sources = &clkset_mout_g2d,
+ .reg_src = { .reg = S5P_CLKSRC_IMAGE, .shift = 8, .size = 1 },
+ .reg_div = { .reg = S5P_CLKDIV_IMAGE, .shift = 0, .size = 4 },
+ }, {
+ .clk = {
+ .name = "sclk_mmc",
+ .id = 0,
+ .parent = &clk_dout_mmc0.clk,
+ .enable = s5pv310_clksrc_mask_fsys_ctrl,
+ .ctrlbit = (1 << 0),
+ },
+ .reg_div = { .reg = S5P_CLKDIV_FSYS1, .shift = 8, .size = 8 },
+ }, {
+ .clk = {
+ .name = "sclk_mmc",
+ .id = 1,
+ .parent = &clk_dout_mmc1.clk,
+ .enable = s5pv310_clksrc_mask_fsys_ctrl,
+ .ctrlbit = (1 << 4),
+ },
+ .reg_div = { .reg = S5P_CLKDIV_FSYS1, .shift = 24, .size = 8 },
+ }, {
+ .clk = {
+ .name = "sclk_mmc",
+ .id = 2,
+ .parent = &clk_dout_mmc2.clk,
+ .enable = s5pv310_clksrc_mask_fsys_ctrl,
+ .ctrlbit = (1 << 8),
+ },
+ .reg_div = { .reg = S5P_CLKDIV_FSYS2, .shift = 8, .size = 8 },
+ }, {
+ .clk = {
+ .name = "sclk_mmc",
+ .id = 3,
+ .parent = &clk_dout_mmc3.clk,
+ .enable = s5pv310_clksrc_mask_fsys_ctrl,
+ .ctrlbit = (1 << 12),
+ },
+ .reg_div = { .reg = S5P_CLKDIV_FSYS2, .shift = 24, .size = 8 },
+ }, {
+ .clk = {
+ .name = "sclk_mmc",
+ .id = 4,
+ .parent = &clk_dout_mmc4.clk,
+ .enable = s5pv310_clksrc_mask_fsys_ctrl,
+ .ctrlbit = (1 << 16),
+ },
+ .reg_div = { .reg = S5P_CLKDIV_FSYS3, .shift = 8, .size = 8 },
+ }
};
/* Clock initialization code */
&clk_aclk_cores,
&clk_aclk_corem1,
&clk_periphclk,
- &clk_atclk,
- &clk_pclk_dbg,
&clk_mout_corebus,
&clk_sclk_dmc,
&clk_aclk_cored,
&clk_aclk_100,
&clk_aclk_160,
&clk_aclk_133,
+ &clk_dout_mmc0,
+ &clk_dout_mmc1,
+ &clk_dout_mmc2,
+ &clk_dout_mmc3,
+ &clk_dout_mmc4,
};
void __init_or_cpufreq s5pv310_setup_clocks(void)
unsigned long vpllsrc;
unsigned long xtal;
unsigned long armclk;
- unsigned long aclk_corem0;
- unsigned long aclk_cores;
- unsigned long aclk_corem1;
- unsigned long periphclk;
unsigned long sclk_dmc;
- unsigned long aclk_cored;
- unsigned long aclk_corep;
- unsigned long aclk_acp;
- unsigned long pclk_acp;
+ unsigned long aclk_200;
+ unsigned long aclk_100;
+ unsigned long aclk_160;
+ unsigned long aclk_133;
unsigned int ptr;
printk(KERN_DEBUG "%s: registering clocks\n", __func__);
apll, mpll, epll, vpll);
armclk = clk_get_rate(&clk_armclk.clk);
- aclk_corem0 = clk_get_rate(&clk_aclk_corem0.clk);
- aclk_cores = clk_get_rate(&clk_aclk_cores.clk);
- aclk_corem1 = clk_get_rate(&clk_aclk_corem1.clk);
- periphclk = clk_get_rate(&clk_periphclk.clk);
sclk_dmc = clk_get_rate(&clk_sclk_dmc.clk);
- aclk_cored = clk_get_rate(&clk_aclk_cored.clk);
- aclk_corep = clk_get_rate(&clk_aclk_corep.clk);
- aclk_acp = clk_get_rate(&clk_aclk_acp.clk);
- pclk_acp = clk_get_rate(&clk_pclk_acp.clk);
-
- printk(KERN_INFO "S5PV310: ARMCLK=%ld, COREM0=%ld, CORES=%ld\n"
- "COREM1=%ld, PERI=%ld, DMC=%ld, CORED=%ld\n"
- "COREP=%ld, ACLK_ACP=%ld, PCLK_ACP=%ld",
- armclk, aclk_corem0, aclk_cores, aclk_corem1,
- periphclk, sclk_dmc, aclk_cored, aclk_corep,
- aclk_acp, pclk_acp);
+
+ aclk_200 = clk_get_rate(&clk_aclk_200.clk);
+ aclk_100 = clk_get_rate(&clk_aclk_100.clk);
+ aclk_160 = clk_get_rate(&clk_aclk_160.clk);
+ aclk_133 = clk_get_rate(&clk_aclk_133.clk);
+
+ printk(KERN_INFO "S5PV310: ARMCLK=%ld, DMC=%ld, ACLK200=%ld\n"
+ "ACLK100=%ld, ACLK160=%ld, ACLK133=%ld\n",
+ armclk, sclk_dmc, aclk_200,
+ aclk_100, aclk_160, aclk_133);
clk_f.rate = armclk;
clk_h.rate = sclk_dmc;
- clk_p.rate = periphclk;
+ clk_p.rate = aclk_100;
for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++)
s3c_set_clksrc(&clksrcs[ptr], true);
#include <asm/mach/irq.h>
#include <asm/proc-fns.h>
+#include <asm/hardware/cache-l2x0.h>
#include <plat/cpu.h>
#include <plat/clock.h>
#include <plat/s5pv310.h>
+#include <plat/sdhci.h>
#include <mach/regs-irq.h>
.length = SZ_4K,
.type = MT_DEVICE,
}, {
- .virtual = (unsigned long)S5P_VA_GPIO,
+ .virtual = (unsigned long)S5P_VA_GPIO1,
.pfn = __phys_to_pfn(S5PV310_PA_GPIO1),
.length = SZ_4K,
.type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S5P_VA_GPIO2,
+ .pfn = __phys_to_pfn(S5PV310_PA_GPIO2),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S5P_VA_GPIO3,
+ .pfn = __phys_to_pfn(S5PV310_PA_GPIO3),
+ .length = SZ_256,
+ .type = MT_DEVICE,
}, {
.virtual = (unsigned long)S3C_VA_UART,
.pfn = __phys_to_pfn(S3C_PA_UART),
.length = SZ_512K,
.type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S5P_VA_SROMC,
+ .pfn = __phys_to_pfn(S5PV310_PA_SROMC),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
},
};
void __init s5pv310_map_io(void)
{
iotable_init(s5pv310_iodesc, ARRAY_SIZE(s5pv310_iodesc));
+
+ /* initialize device information early */
+ s5pv310_default_sdhci0();
+ s5pv310_default_sdhci1();
+ s5pv310_default_sdhci2();
+ s5pv310_default_sdhci3();
}
void __init s5pv310_init_clocks(int xtal)
core_initcall(s5pv310_core_init);
+#ifdef CONFIG_CACHE_L2X0
+static int __init s5pv310_l2x0_cache_init(void)
+{
+ /* TAG, Data Latency Control: 2cycle */
+ __raw_writel(0x110, S5P_VA_L2CC + L2X0_TAG_LATENCY_CTRL);
+ __raw_writel(0x110, S5P_VA_L2CC + L2X0_DATA_LATENCY_CTRL);
+
+ /* L2X0 Prefetch Control */
+ __raw_writel(0x30000007, S5P_VA_L2CC + L2X0_PREFETCH_CTRL);
+
+ /* L2X0 Power Control */
+ __raw_writel(L2X0_DYNAMIC_CLK_GATING_EN | L2X0_STNDBY_MODE_EN,
+ S5P_VA_L2CC + L2X0_POWER_CTRL);
+
+ l2x0_init(S5P_VA_L2CC, 0x7C070001, 0xC200ffff);
+
+ return 0;
+}
+
+early_initcall(s5pv310_l2x0_cache_init);
+#endif
+
int __init s5pv310_init(void)
{
printk(KERN_INFO "S5PV310: Initializing architecture\n");
--- /dev/null
+/* linux/arch/arm/mach-s5pv310/gpiolib.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * S5PV310 - GPIOlib support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+
+#include <mach/map.h>
+
+#include <plat/gpio-core.h>
+#include <plat/gpio-cfg.h>
+#include <plat/gpio-cfg-helpers.h>
+
+static struct s3c_gpio_cfg gpio_cfg = {
+ .set_config = s3c_gpio_setcfg_s3c64xx_4bit,
+ .set_pull = s3c_gpio_setpull_updown,
+ .get_pull = s3c_gpio_getpull_updown,
+};
+
+static struct s3c_gpio_cfg gpio_cfg_noint = {
+ .set_config = s3c_gpio_setcfg_s3c64xx_4bit,
+ .set_pull = s3c_gpio_setpull_updown,
+ .get_pull = s3c_gpio_getpull_updown,
+};
+
+/*
+ * Following are the gpio banks in v310.
+ *
+ * The 'config' member when left to NULL, is initialized to the default
+ * structure gpio_cfg in the init function below.
+ *
+ * The 'base' member is also initialized in the init function below.
+ * Note: The initialization of 'base' member of s3c_gpio_chip structure
+ * uses the above macro and depends on the banks being listed in order here.
+ */
+static struct s3c_gpio_chip s5pv310_gpio_part1_4bit[] = {
+ {
+ .chip = {
+ .base = S5PV310_GPA0(0),
+ .ngpio = S5PV310_GPIO_A0_NR,
+ .label = "GPA0",
+ },
+ }, {
+ .chip = {
+ .base = S5PV310_GPA1(0),
+ .ngpio = S5PV310_GPIO_A1_NR,
+ .label = "GPA1",
+ },
+ }, {
+ .chip = {
+ .base = S5PV310_GPB(0),
+ .ngpio = S5PV310_GPIO_B_NR,
+ .label = "GPB",
+ },
+ }, {
+ .chip = {
+ .base = S5PV310_GPC0(0),
+ .ngpio = S5PV310_GPIO_C0_NR,
+ .label = "GPC0",
+ },
+ }, {
+ .chip = {
+ .base = S5PV310_GPC1(0),
+ .ngpio = S5PV310_GPIO_C1_NR,
+ .label = "GPC1",
+ },
+ }, {
+ .chip = {
+ .base = S5PV310_GPD0(0),
+ .ngpio = S5PV310_GPIO_D0_NR,
+ .label = "GPD0",
+ },
+ }, {
+ .chip = {
+ .base = S5PV310_GPD1(0),
+ .ngpio = S5PV310_GPIO_D1_NR,
+ .label = "GPD1",
+ },
+ }, {
+ .chip = {
+ .base = S5PV310_GPE0(0),
+ .ngpio = S5PV310_GPIO_E0_NR,
+ .label = "GPE0",
+ },
+ }, {
+ .chip = {
+ .base = S5PV310_GPE1(0),
+ .ngpio = S5PV310_GPIO_E1_NR,
+ .label = "GPE1",
+ },
+ }, {
+ .chip = {
+ .base = S5PV310_GPE2(0),
+ .ngpio = S5PV310_GPIO_E2_NR,
+ .label = "GPE2",
+ },
+ }, {
+ .chip = {
+ .base = S5PV310_GPE3(0),
+ .ngpio = S5PV310_GPIO_E3_NR,
+ .label = "GPE3",
+ },
+ }, {
+ .chip = {
+ .base = S5PV310_GPE4(0),
+ .ngpio = S5PV310_GPIO_E4_NR,
+ .label = "GPE4",
+ },
+ }, {
+ .chip = {
+ .base = S5PV310_GPF0(0),
+ .ngpio = S5PV310_GPIO_F0_NR,
+ .label = "GPF0",
+ },
+ }, {
+ .chip = {
+ .base = S5PV310_GPF1(0),
+ .ngpio = S5PV310_GPIO_F1_NR,
+ .label = "GPF1",
+ },
+ }, {
+ .chip = {
+ .base = S5PV310_GPF2(0),
+ .ngpio = S5PV310_GPIO_F2_NR,
+ .label = "GPF2",
+ },
+ }, {
+ .chip = {
+ .base = S5PV310_GPF3(0),
+ .ngpio = S5PV310_GPIO_F3_NR,
+ .label = "GPF3",
+ },
+ },
+};
+
+static struct s3c_gpio_chip s5pv310_gpio_part2_4bit[] = {
+ {
+ .chip = {
+ .base = S5PV310_GPJ0(0),
+ .ngpio = S5PV310_GPIO_J0_NR,
+ .label = "GPJ0",
+ },
+ }, {
+ .chip = {
+ .base = S5PV310_GPJ1(0),
+ .ngpio = S5PV310_GPIO_J1_NR,
+ .label = "GPJ1",
+ },
+ }, {
+ .chip = {
+ .base = S5PV310_GPK0(0),
+ .ngpio = S5PV310_GPIO_K0_NR,
+ .label = "GPK0",
+ },
+ }, {
+ .chip = {
+ .base = S5PV310_GPK1(0),
+ .ngpio = S5PV310_GPIO_K1_NR,
+ .label = "GPK1",
+ },
+ }, {
+ .chip = {
+ .base = S5PV310_GPK2(0),
+ .ngpio = S5PV310_GPIO_K2_NR,
+ .label = "GPK2",
+ },
+ }, {
+ .chip = {
+ .base = S5PV310_GPK3(0),
+ .ngpio = S5PV310_GPIO_K3_NR,
+ .label = "GPK3",
+ },
+ }, {
+ .chip = {
+ .base = S5PV310_GPL0(0),
+ .ngpio = S5PV310_GPIO_L0_NR,
+ .label = "GPL0",
+ },
+ }, {
+ .chip = {
+ .base = S5PV310_GPL1(0),
+ .ngpio = S5PV310_GPIO_L1_NR,
+ .label = "GPL1",
+ },
+ }, {
+ .chip = {
+ .base = S5PV310_GPL2(0),
+ .ngpio = S5PV310_GPIO_L2_NR,
+ .label = "GPL2",
+ },
+ }, {
+ .base = (S5P_VA_GPIO2 + 0xC00),
+ .config = &gpio_cfg_noint,
+ .irq_base = IRQ_EINT(0),
+ .chip = {
+ .base = S5PV310_GPX0(0),
+ .ngpio = S5PV310_GPIO_X0_NR,
+ .label = "GPX0",
+ .to_irq = samsung_gpiolib_to_irq,
+ },
+ }, {
+ .base = (S5P_VA_GPIO2 + 0xC20),
+ .config = &gpio_cfg_noint,
+ .irq_base = IRQ_EINT(8),
+ .chip = {
+ .base = S5PV310_GPX1(0),
+ .ngpio = S5PV310_GPIO_X1_NR,
+ .label = "GPX1",
+ .to_irq = samsung_gpiolib_to_irq,
+ },
+ }, {
+ .base = (S5P_VA_GPIO2 + 0xC40),
+ .config = &gpio_cfg_noint,
+ .irq_base = IRQ_EINT(16),
+ .chip = {
+ .base = S5PV310_GPX2(0),
+ .ngpio = S5PV310_GPIO_X2_NR,
+ .label = "GPX2",
+ .to_irq = samsung_gpiolib_to_irq,
+ },
+ }, {
+ .base = (S5P_VA_GPIO2 + 0xC60),
+ .config = &gpio_cfg_noint,
+ .irq_base = IRQ_EINT(24),
+ .chip = {
+ .base = S5PV310_GPX3(0),
+ .ngpio = S5PV310_GPIO_X3_NR,
+ .label = "GPX3",
+ .to_irq = samsung_gpiolib_to_irq,
+ },
+ },
+};
+
+static struct s3c_gpio_chip s5pv310_gpio_part3_4bit[] = {
+ {
+ .chip = {
+ .base = S5PV310_GPZ(0),
+ .ngpio = S5PV310_GPIO_Z_NR,
+ .label = "GPZ",
+ },
+ },
+};
+
+static __init int s5pv310_gpiolib_init(void)
+{
+ struct s3c_gpio_chip *chip;
+ int i;
+ int nr_chips;
+
+ /* GPIO part 1 */
+
+ chip = s5pv310_gpio_part1_4bit;
+ nr_chips = ARRAY_SIZE(s5pv310_gpio_part1_4bit);
+
+ for (i = 0; i < nr_chips; i++, chip++) {
+ if (chip->config == NULL)
+ chip->config = &gpio_cfg;
+ if (chip->base == NULL)
+ chip->base = S5P_VA_GPIO1 + (i) * 0x20;
+ }
+
+ samsung_gpiolib_add_4bit_chips(s5pv310_gpio_part1_4bit, nr_chips);
+
+ /* GPIO part 2 */
+
+ chip = s5pv310_gpio_part2_4bit;
+ nr_chips = ARRAY_SIZE(s5pv310_gpio_part2_4bit);
+
+ for (i = 0; i < nr_chips; i++, chip++) {
+ if (chip->config == NULL)
+ chip->config = &gpio_cfg;
+ if (chip->base == NULL)
+ chip->base = S5P_VA_GPIO2 + (i) * 0x20;
+ }
+
+ samsung_gpiolib_add_4bit_chips(s5pv310_gpio_part2_4bit, nr_chips);
+
+ /* GPIO part 3 */
+
+ chip = s5pv310_gpio_part3_4bit;
+ nr_chips = ARRAY_SIZE(s5pv310_gpio_part3_4bit);
+
+ for (i = 0; i < nr_chips; i++, chip++) {
+ if (chip->config == NULL)
+ chip->config = &gpio_cfg;
+ if (chip->base == NULL)
+ chip->base = S5P_VA_GPIO3 + (i) * 0x20;
+ }
+
+ samsung_gpiolib_add_4bit_chips(s5pv310_gpio_part3_4bit, nr_chips);
+
+ return 0;
+}
+core_initcall(s5pv310_gpiolib_init);
--- /dev/null
+/* linux arch/arm/mach-s5pv310/hotplug.c
+ *
+ * Cloned from linux/arch/arm/mach-realview/hotplug.c
+ *
+ * Copyright (C) 2002 ARM Ltd.
+ * All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/smp.h>
+#include <linux/completion.h>
+
+#include <asm/cacheflush.h>
+
+extern volatile int pen_release;
+
+static DECLARE_COMPLETION(cpu_killed);
+
+static inline void cpu_enter_lowpower(void)
+{
+ unsigned int v;
+
+ flush_cache_all();
+ asm volatile(
+ " mcr p15, 0, %1, c7, c5, 0\n"
+ " mcr p15, 0, %1, c7, c10, 4\n"
+ /*
+ * Turn off coherency
+ */
+ " mrc p15, 0, %0, c1, c0, 1\n"
+ " bic %0, %0, #0x20\n"
+ " mcr p15, 0, %0, c1, c0, 1\n"
+ " mrc p15, 0, %0, c1, c0, 0\n"
+ " bic %0, %0, #0x04\n"
+ " mcr p15, 0, %0, c1, c0, 0\n"
+ : "=&r" (v)
+ : "r" (0)
+ : "cc");
+}
+
+static inline void cpu_leave_lowpower(void)
+{
+ unsigned int v;
+
+ asm volatile(
+ "mrc p15, 0, %0, c1, c0, 0\n"
+ " orr %0, %0, #0x04\n"
+ " mcr p15, 0, %0, c1, c0, 0\n"
+ " mrc p15, 0, %0, c1, c0, 1\n"
+ " orr %0, %0, #0x20\n"
+ " mcr p15, 0, %0, c1, c0, 1\n"
+ : "=&r" (v)
+ :
+ : "cc");
+}
+
+static inline void platform_do_lowpower(unsigned int cpu)
+{
+ /*
+ * there is no power-control hardware on this platform, so all
+ * we can do is put the core into WFI; this is safe as the calling
+ * code will have already disabled interrupts
+ */
+ for (;;) {
+ /*
+ * here's the WFI
+ */
+ asm(".word 0xe320f003\n"
+ :
+ :
+ : "memory", "cc");
+
+ if (pen_release == cpu) {
+ /*
+ * OK, proper wakeup, we're done
+ */
+ break;
+ }
+
+ /*
+ * getting here, means that we have come out of WFI without
+ * having been woken up - this shouldn't happen
+ *
+ * The trouble is, letting people know about this is not really
+ * possible, since we are currently running incoherently, and
+ * therefore cannot safely call printk() or anything else
+ */
+#ifdef DEBUG
+ printk(KERN_WARN "CPU%u: spurious wakeup call\n", cpu);
+#endif
+ }
+}
+
+int platform_cpu_kill(unsigned int cpu)
+{
+ return wait_for_completion_timeout(&cpu_killed, 5000);
+}
+
+/*
+ * platform-specific code to shutdown a CPU
+ *
+ * Called with IRQs disabled
+ */
+void platform_cpu_die(unsigned int cpu)
+{
+#ifdef DEBUG
+ unsigned int this_cpu = hard_smp_processor_id();
+
+ if (cpu != this_cpu) {
+ printk(KERN_CRIT "Eek! platform_cpu_die running on %u, should be %u\n",
+ this_cpu, cpu);
+ BUG();
+ }
+#endif
+
+ printk(KERN_NOTICE "CPU%u: shutdown\n", cpu);
+ complete(&cpu_killed);
+
+ /*
+ * we're ready for shutdown now, so do it
+ */
+ cpu_enter_lowpower();
+ platform_do_lowpower(cpu);
+
+ /*
+ * bring this CPU back into the world of cache
+ * coherency, and then restore interrupts
+ */
+ cpu_leave_lowpower();
+}
+
+int platform_cpu_disable(unsigned int cpu)
+{
+ /*
+ * we don't allow CPU 0 to be shutdown (it is still too special
+ * e.g. clock tick interrupts)
+ */
+ return cpu == 0 ? -EPERM : 0;
+}
* Copyright (c) 2010 Samsung Electronics Co., Ltd.
* http://www.samsung.com/
*
- * S5PV210 - IRQ definitions
+ * S5PV310 - IRQ definitions
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
#define IRQ_TIMER3_VIC COMBINER_IRQ(22, 3)
#define IRQ_TIMER4_VIC COMBINER_IRQ(22, 4)
+#define IRQ_RTC_ALARM COMBINER_IRQ(23, 0)
+#define IRQ_RTC_TIC COMBINER_IRQ(23, 1)
+
#define IRQ_UART0 COMBINER_IRQ(26, 0)
#define IRQ_UART1 COMBINER_IRQ(26, 1)
#define IRQ_UART2 COMBINER_IRQ(26, 2)
#define IRQ_UART4 COMBINER_IRQ(26, 4)
#define IRQ_IIC COMBINER_IRQ(27, 0)
+#define IRQ_IIC1 COMBINER_IRQ(27, 1)
+#define IRQ_IIC2 COMBINER_IRQ(27, 2)
+#define IRQ_IIC3 COMBINER_IRQ(27, 3)
+#define IRQ_IIC4 COMBINER_IRQ(27, 4)
+#define IRQ_IIC5 COMBINER_IRQ(27, 5)
+#define IRQ_IIC6 COMBINER_IRQ(27, 6)
+#define IRQ_IIC7 COMBINER_IRQ(27, 7)
+
+#define IRQ_HSMMC0 COMBINER_IRQ(29, 0)
+#define IRQ_HSMMC1 COMBINER_IRQ(29, 1)
+#define IRQ_HSMMC2 COMBINER_IRQ(29, 2)
+#define IRQ_HSMMC3 COMBINER_IRQ(29, 3)
#define IRQ_ONENAND_AUDI COMBINER_IRQ(34, 0)
-/* Set the default NR_IRQS */
+#define IRQ_EINT4 COMBINER_IRQ(37, 0)
+#define IRQ_EINT5 COMBINER_IRQ(37, 1)
+#define IRQ_EINT6 COMBINER_IRQ(37, 2)
+#define IRQ_EINT7 COMBINER_IRQ(37, 3)
+#define IRQ_EINT8 COMBINER_IRQ(38, 0)
+
+#define IRQ_EINT9 COMBINER_IRQ(38, 1)
+#define IRQ_EINT10 COMBINER_IRQ(38, 2)
+#define IRQ_EINT11 COMBINER_IRQ(38, 3)
+#define IRQ_EINT12 COMBINER_IRQ(38, 4)
+#define IRQ_EINT13 COMBINER_IRQ(38, 5)
+#define IRQ_EINT14 COMBINER_IRQ(38, 6)
+#define IRQ_EINT15 COMBINER_IRQ(38, 7)
+
+#define IRQ_EINT16_31 COMBINER_IRQ(39, 0)
-#define NR_IRQS COMBINER_IRQ(MAX_COMBINER_NR, 0)
+#define MAX_COMBINER_NR 40
+
+#define S5P_IRQ_EINT_BASE COMBINER_IRQ(MAX_COMBINER_NR, 0)
+
+#define S5P_EINT_BASE1 (S5P_IRQ_EINT_BASE + 0)
+#define S5P_EINT_BASE2 (S5P_IRQ_EINT_BASE + 16)
+
+/* Set the default NR_IRQS */
-#define MAX_COMBINER_NR 39
+#define NR_IRQS (S5P_IRQ_EINT_BASE + 32)
#endif /* __ASM_ARCH_IRQS_H */
#define S5PV310_PA_SYSRAM (0x02025000)
+#define S5PV310_PA_SROM_BANK(x) (0x04000000 + ((x) * 0x01000000))
+
#define S5PC210_PA_ONENAND (0x0C000000)
#define S5P_PA_ONENAND S5PC210_PA_ONENAND
#define S5PV310_PA_CHIPID (0x10000000)
#define S5P_PA_CHIPID S5PV310_PA_CHIPID
-#define S5PV310_PA_SYSCON (0x10020000)
+#define S5PV310_PA_SYSCON (0x10010000)
#define S5P_PA_SYSCON S5PV310_PA_SYSCON
#define S5PV310_PA_CMU (0x10030000)
#define S5PV310_PA_WATCHDOG (0x10060000)
+#define S5PV310_PA_RTC (0x10070000)
#define S5PV310_PA_COMBINER (0x10448000)
#define S5PV310_PA_HSMMC(x) (0x12510000 + ((x) * 0x10000))
+#define S5PV310_PA_SROMC (0x12570000)
+
#define S5PV310_PA_UART (0x13800000)
#define S5P_PA_UART(x) (S5PV310_PA_UART + ((x) * S3C_UART_OFFSET))
#define S5P_SZ_UART SZ_256
-#define S5PV310_PA_IIC0 (0x13860000)
+#define S5PV310_PA_IIC(x) (0x13860000 + ((x) * 0x10000))
#define S5PV310_PA_TIMER (0x139D0000)
#define S5P_PA_TIMER S5PV310_PA_TIMER
#define S3C_PA_HSMMC1 S5PV310_PA_HSMMC(1)
#define S3C_PA_HSMMC2 S5PV310_PA_HSMMC(2)
#define S3C_PA_HSMMC3 S5PV310_PA_HSMMC(3)
-#define S3C_PA_IIC S5PV310_PA_IIC0
+#define S3C_PA_IIC S5PV310_PA_IIC(0)
+#define S3C_PA_IIC1 S5PV310_PA_IIC(1)
+#define S3C_PA_IIC2 S5PV310_PA_IIC(2)
+#define S3C_PA_IIC3 S5PV310_PA_IIC(3)
+#define S3C_PA_IIC4 S5PV310_PA_IIC(4)
+#define S3C_PA_IIC5 S5PV310_PA_IIC(5)
+#define S3C_PA_IIC6 S5PV310_PA_IIC(6)
+#define S3C_PA_IIC7 S5PV310_PA_IIC(7)
+#define S3C_PA_RTC S5PV310_PA_RTC
#define S3C_PA_WDT S5PV310_PA_WATCHDOG
#endif /* __ASM_ARCH_MAP_H */
#define S5P_CLKSRC_TOP0 S5P_CLKREG(0x0C210)
#define S5P_CLKSRC_TOP1 S5P_CLKREG(0x0C214)
-
+#define S5P_CLKSRC_CAM S5P_CLKREG(0x0C220)
+#define S5P_CLKSRC_IMAGE S5P_CLKREG(0x0C230)
+#define S5P_CLKSRC_LCD0 S5P_CLKREG(0x0C234)
+#define S5P_CLKSRC_LCD1 S5P_CLKREG(0x0C238)
+#define S5P_CLKSRC_FSYS S5P_CLKREG(0x0C240)
#define S5P_CLKSRC_PERIL0 S5P_CLKREG(0x0C250)
+#define S5P_CLKSRC_PERIL1 S5P_CLKREG(0x0C254)
#define S5P_CLKDIV_TOP S5P_CLKREG(0x0C510)
-
+#define S5P_CLKDIV_CAM S5P_CLKREG(0x0C520)
+#define S5P_CLKDIV_IMAGE S5P_CLKREG(0x0C530)
+#define S5P_CLKDIV_LCD0 S5P_CLKREG(0x0C534)
+#define S5P_CLKDIV_LCD1 S5P_CLKREG(0x0C538)
+#define S5P_CLKDIV_FSYS0 S5P_CLKREG(0x0C540)
+#define S5P_CLKDIV_FSYS1 S5P_CLKREG(0x0C544)
+#define S5P_CLKDIV_FSYS2 S5P_CLKREG(0x0C548)
+#define S5P_CLKDIV_FSYS3 S5P_CLKREG(0x0C54C)
#define S5P_CLKDIV_PERIL0 S5P_CLKREG(0x0C550)
#define S5P_CLKDIV_PERIL1 S5P_CLKREG(0x0C554)
#define S5P_CLKDIV_PERIL2 S5P_CLKREG(0x0C558)
#define S5P_CLKDIV_PERIL4 S5P_CLKREG(0x0C560)
#define S5P_CLKDIV_PERIL5 S5P_CLKREG(0x0C564)
+#define S5P_CLKSRC_MASK_TOP S5P_CLKREG(0x0C310)
+#define S5P_CLKSRC_MASK_CAM S5P_CLKREG(0x0C320)
+#define S5P_CLKSRC_MASK_LCD0 S5P_CLKREG(0x0C334)
+#define S5P_CLKSRC_MASK_LCD1 S5P_CLKREG(0x0C338)
+#define S5P_CLKSRC_MASK_FSYS S5P_CLKREG(0x0C340)
#define S5P_CLKSRC_MASK_PERIL0 S5P_CLKREG(0x0C350)
+#define S5P_CLKSRC_MASK_PERIL1 S5P_CLKREG(0x0C354)
+#define S5P_CLKGATE_IP_CAM S5P_CLKREG(0x0C920)
+#define S5P_CLKGATE_IP_IMAGE S5P_CLKREG(0x0C930)
+#define S5P_CLKGATE_IP_LCD0 S5P_CLKREG(0x0C934)
+#define S5P_CLKGATE_IP_LCD1 S5P_CLKREG(0x0C938)
+#define S5P_CLKGATE_IP_FSYS S5P_CLKREG(0x0C940)
#define S5P_CLKGATE_IP_PERIL S5P_CLKREG(0x0C950)
+#define S5P_CLKGATE_IP_PERIR S5P_CLKREG(0x0C960)
#define S5P_CLKSRC_CORE S5P_CLKREG(0x10200)
#define S5P_CLKDIV_CORE0 S5P_CLKREG(0x10500)
#define S5P_CLKGATE_SCLKCPU S5P_CLKREG(0x14800)
+/* Compatibility defines */
+
+#define S5P_EPLL_CON S5P_EPLL_CON0
+
#endif /* __ASM_ARCH_REGS_CLOCK_H */
--- /dev/null
+/* linux/arch/arm/mach-s5pv310/include/mach/regs-gpio.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * S5PV310 - GPIO (including EINT) register definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_REGS_GPIO_H
+#define __ASM_ARCH_REGS_GPIO_H __FILE__
+
+#include <mach/map.h>
+#include <mach/irqs.h>
+
+#define S5PV310_EINT40CON (S5P_VA_GPIO2 + 0xE00)
+#define S5P_EINT_CON(x) (S5PV310_EINT40CON + ((x) * 0x4))
+
+#define S5PV310_EINT40FLTCON0 (S5P_VA_GPIO2 + 0xE80)
+#define S5P_EINT_FLTCON(x) (S5PV310_EINT40FLTCON0 + ((x) * 0x4))
+
+#define S5PV310_EINT40MASK (S5P_VA_GPIO2 + 0xF00)
+#define S5P_EINT_MASK(x) (S5PV310_EINT40MASK + ((x) * 0x4))
+
+#define S5PV310_EINT40PEND (S5P_VA_GPIO2 + 0xF40)
+#define S5P_EINT_PEND(x) (S5PV310_EINT40PEND + ((x) * 0x4))
+
+#define EINT_REG_NR(x) (EINT_OFFSET(x) >> 3)
+
+#define eint_irq_to_bit(irq) (1 << (EINT_OFFSET(irq) & 0x7))
+
+#define EINT_MODE S3C_GPIO_SFN(0xf)
+
+#define EINT_GPIO_0(x) S5PV310_GPX0(x)
+#define EINT_GPIO_1(x) S5PV310_GPX1(x)
+#define EINT_GPIO_2(x) S5PV310_GPX2(x)
+#define EINT_GPIO_3(x) S5PV310_GPX3(x)
+
+#endif /* __ASM_ARCH_REGS_GPIO_H */
--- /dev/null
+/* linux/arch/arm/mach-s5pv310/include/mach/regs-srom.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * S5PV310 - SROMC register definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_REGS_SROM_H
+#define __ASM_ARCH_REGS_SROM_H __FILE__
+
+#include <mach/map.h>
+
+#define S5PV310_SROMREG(x) (S5P_VA_SROMC + (x))
+
+#define S5PV310_SROM_BW S5PV310_SROMREG(0x0)
+#define S5PV310_SROM_BC0 S5PV310_SROMREG(0x4)
+#define S5PV310_SROM_BC1 S5PV310_SROMREG(0x8)
+#define S5PV310_SROM_BC2 S5PV310_SROMREG(0xc)
+#define S5PV310_SROM_BC3 S5PV310_SROMREG(0x10)
+
+/* one register BW holds 4 x 4-bit packed settings for NCS0 - NCS3 */
+
+#define S5PV310_SROM_BW__DATAWIDTH__SHIFT 0
+#define S5PV310_SROM_BW__ADDRMODE__SHIFT 1
+#define S5PV310_SROM_BW__WAITENABLE__SHIFT 2
+#define S5PV310_SROM_BW__BYTEENABLE__SHIFT 3
+
+#define S5PV310_SROM_BW__CS_MASK 0xf
+
+#define S5PV310_SROM_BW__NCS0__SHIFT 0
+#define S5PV310_SROM_BW__NCS1__SHIFT 4
+#define S5PV310_SROM_BW__NCS2__SHIFT 8
+#define S5PV310_SROM_BW__NCS3__SHIFT 12
+
+/* applies to same to BCS0 - BCS3 */
+
+#define S5PV310_SROM_BCX__PMC__SHIFT 0
+#define S5PV310_SROM_BCX__TACP__SHIFT 4
+#define S5PV310_SROM_BCX__TCAH__SHIFT 8
+#define S5PV310_SROM_BCX__TCOH__SHIFT 12
+#define S5PV310_SROM_BCX__TACC__SHIFT 16
+#define S5PV310_SROM_BCX__TCOS__SHIFT 24
+#define S5PV310_SROM_BCX__TACS__SHIFT 28
+
+#endif /* __ASM_ARCH_REGS_SROM_H */
#ifndef __ASM_ARCH_VMALLOC_H
#define __ASM_ARCH_VMALLOC_H __FILE__
-#define VMALLOC_END (0xF0000000UL)
+#define VMALLOC_END 0xF6000000UL
#endif /* __ASM_ARCH_VMALLOC_H */
if (status == 0)
goto out;
- for (combiner_irq = 0; combiner_irq < 32; combiner_irq++) {
- if (status & 0x1)
- break;
- status >>= 1;
- }
+ combiner_irq = __ffs(status);
cascade_irq = combiner_irq + (chip_data->irq_offset & ~31);
if (unlikely(cascade_irq >= NR_IRQS))
--- /dev/null
+/* linux/arch/arm/mach-s5pv310/irq-eint.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * S5PV310 - IRQ EINT support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/sysdev.h>
+#include <linux/gpio.h>
+
+#include <plat/pm.h>
+#include <plat/cpu.h>
+#include <plat/gpio-cfg.h>
+
+#include <mach/regs-gpio.h>
+
+static DEFINE_SPINLOCK(eint_lock);
+
+static unsigned int eint0_15_data[16];
+
+static unsigned int s5pv310_get_irq_nr(unsigned int number)
+{
+ u32 ret = 0;
+
+ switch (number) {
+ case 0 ... 3:
+ ret = (number + IRQ_EINT0);
+ break;
+ case 4 ... 7:
+ ret = (number + (IRQ_EINT4 - 4));
+ break;
+ case 8 ... 15:
+ ret = (number + (IRQ_EINT8 - 8));
+ break;
+ default:
+ printk(KERN_ERR "number available : %d\n", number);
+ }
+
+ return ret;
+}
+
+static inline void s5pv310_irq_eint_mask(unsigned int irq)
+{
+ u32 mask;
+
+ spin_lock(&eint_lock);
+ mask = __raw_readl(S5P_EINT_MASK(EINT_REG_NR(irq)));
+ mask |= eint_irq_to_bit(irq);
+ __raw_writel(mask, S5P_EINT_MASK(EINT_REG_NR(irq)));
+ spin_unlock(&eint_lock);
+}
+
+static void s5pv310_irq_eint_unmask(unsigned int irq)
+{
+ u32 mask;
+
+ spin_lock(&eint_lock);
+ mask = __raw_readl(S5P_EINT_MASK(EINT_REG_NR(irq)));
+ mask &= ~(eint_irq_to_bit(irq));
+ __raw_writel(mask, S5P_EINT_MASK(EINT_REG_NR(irq)));
+ spin_unlock(&eint_lock);
+}
+
+static inline void s5pv310_irq_eint_ack(unsigned int irq)
+{
+ __raw_writel(eint_irq_to_bit(irq), S5P_EINT_PEND(EINT_REG_NR(irq)));
+}
+
+static void s5pv310_irq_eint_maskack(unsigned int irq)
+{
+ s5pv310_irq_eint_mask(irq);
+ s5pv310_irq_eint_ack(irq);
+}
+
+static int s5pv310_irq_eint_set_type(unsigned int irq, unsigned int type)
+{
+ int offs = EINT_OFFSET(irq);
+ int shift;
+ u32 ctrl, mask;
+ u32 newvalue = 0;
+
+ switch (type) {
+ case IRQ_TYPE_EDGE_RISING:
+ newvalue = S5P_IRQ_TYPE_EDGE_RISING;
+ break;
+
+ case IRQ_TYPE_EDGE_FALLING:
+ newvalue = S5P_IRQ_TYPE_EDGE_FALLING;
+ break;
+
+ case IRQ_TYPE_EDGE_BOTH:
+ newvalue = S5P_IRQ_TYPE_EDGE_BOTH;
+ break;
+
+ case IRQ_TYPE_LEVEL_LOW:
+ newvalue = S5P_IRQ_TYPE_LEVEL_LOW;
+ break;
+
+ case IRQ_TYPE_LEVEL_HIGH:
+ newvalue = S5P_IRQ_TYPE_LEVEL_HIGH;
+ break;
+
+ default:
+ printk(KERN_ERR "No such irq type %d", type);
+ return -EINVAL;
+ }
+
+ shift = (offs & 0x7) * 4;
+ mask = 0x7 << shift;
+
+ spin_lock(&eint_lock);
+ ctrl = __raw_readl(S5P_EINT_CON(EINT_REG_NR(irq)));
+ ctrl &= ~mask;
+ ctrl |= newvalue << shift;
+ __raw_writel(ctrl, S5P_EINT_CON(EINT_REG_NR(irq)));
+ spin_unlock(&eint_lock);
+
+ switch (offs) {
+ case 0 ... 7:
+ s3c_gpio_cfgpin(EINT_GPIO_0(offs & 0x7), EINT_MODE);
+ break;
+ case 8 ... 15:
+ s3c_gpio_cfgpin(EINT_GPIO_1(offs & 0x7), EINT_MODE);
+ break;
+ case 16 ... 23:
+ s3c_gpio_cfgpin(EINT_GPIO_2(offs & 0x7), EINT_MODE);
+ break;
+ case 24 ... 31:
+ s3c_gpio_cfgpin(EINT_GPIO_3(offs & 0x7), EINT_MODE);
+ break;
+ default:
+ printk(KERN_ERR "No such irq number %d", offs);
+ }
+
+ return 0;
+}
+
+static struct irq_chip s5pv310_irq_eint = {
+ .name = "s5pv310-eint",
+ .mask = s5pv310_irq_eint_mask,
+ .unmask = s5pv310_irq_eint_unmask,
+ .mask_ack = s5pv310_irq_eint_maskack,
+ .ack = s5pv310_irq_eint_ack,
+ .set_type = s5pv310_irq_eint_set_type,
+#ifdef CONFIG_PM
+ .set_wake = s3c_irqext_wake,
+#endif
+};
+
+/* s5pv310_irq_demux_eint
+ *
+ * This function demuxes the IRQ from from EINTs 16 to 31.
+ * It is designed to be inlined into the specific handler
+ * s5p_irq_demux_eintX_Y.
+ *
+ * Each EINT pend/mask registers handle eight of them.
+ */
+static inline void s5pv310_irq_demux_eint(unsigned int start)
+{
+ unsigned int irq;
+
+ u32 status = __raw_readl(S5P_EINT_PEND(EINT_REG_NR(start)));
+ u32 mask = __raw_readl(S5P_EINT_MASK(EINT_REG_NR(start)));
+
+ status &= ~mask;
+ status &= 0xff;
+
+ while (status) {
+ irq = fls(status) - 1;
+ generic_handle_irq(irq + start);
+ status &= ~(1 << irq);
+ }
+}
+
+static void s5pv310_irq_demux_eint16_31(unsigned int irq, struct irq_desc *desc)
+{
+ s5pv310_irq_demux_eint(IRQ_EINT(16));
+ s5pv310_irq_demux_eint(IRQ_EINT(24));
+}
+
+static void s5pv310_irq_eint0_15(unsigned int irq, struct irq_desc *desc)
+{
+ u32 *irq_data = get_irq_data(irq);
+ struct irq_chip *chip = get_irq_chip(irq);
+
+ chip->mask(irq);
+
+ if (chip->ack)
+ chip->ack(irq);
+
+ generic_handle_irq(*irq_data);
+
+ chip->unmask(irq);
+}
+
+int __init s5pv310_init_irq_eint(void)
+{
+ int irq;
+
+ for (irq = 0 ; irq <= 31 ; irq++) {
+ set_irq_chip(IRQ_EINT(irq), &s5pv310_irq_eint);
+ set_irq_handler(IRQ_EINT(irq), handle_level_irq);
+ set_irq_flags(IRQ_EINT(irq), IRQF_VALID);
+ }
+
+ set_irq_chained_handler(IRQ_EINT16_31, s5pv310_irq_demux_eint16_31);
+
+ for (irq = 0 ; irq <= 15 ; irq++) {
+ eint0_15_data[irq] = IRQ_EINT(irq);
+
+ set_irq_data(s5pv310_get_irq_nr(irq), &eint0_15_data[irq]);
+ set_irq_chained_handler(s5pv310_get_irq_nr(irq),
+ s5pv310_irq_eint0_15);
+ }
+
+ return 0;
+}
+
+arch_initcall(s5pv310_init_irq_eint);
--- /dev/null
+/* linux/arch/arm/mach-s5pv310/mach-smdkc210.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/serial_core.h>
+#include <linux/gpio.h>
+#include <linux/mmc/host.h>
+#include <linux/platform_device.h>
+#include <linux/smsc911x.h>
+#include <linux/io.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach-types.h>
+
+#include <plat/regs-serial.h>
+#include <plat/s5pv310.h>
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/sdhci.h>
+
+#include <mach/map.h>
+#include <mach/regs-srom.h>
+
+/* Following are default values for UCON, ULCON and UFCON UART registers */
+#define SMDKC210_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
+ S3C2410_UCON_RXILEVEL | \
+ S3C2410_UCON_TXIRQMODE | \
+ S3C2410_UCON_RXIRQMODE | \
+ S3C2410_UCON_RXFIFO_TOI | \
+ S3C2443_UCON_RXERR_IRQEN)
+
+#define SMDKC210_ULCON_DEFAULT S3C2410_LCON_CS8
+
+#define SMDKC210_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \
+ S5PV210_UFCON_TXTRIG4 | \
+ S5PV210_UFCON_RXTRIG4)
+
+static struct s3c2410_uartcfg smdkc210_uartcfgs[] __initdata = {
+ [0] = {
+ .hwport = 0,
+ .flags = 0,
+ .ucon = SMDKC210_UCON_DEFAULT,
+ .ulcon = SMDKC210_ULCON_DEFAULT,
+ .ufcon = SMDKC210_UFCON_DEFAULT,
+ },
+ [1] = {
+ .hwport = 1,
+ .flags = 0,
+ .ucon = SMDKC210_UCON_DEFAULT,
+ .ulcon = SMDKC210_ULCON_DEFAULT,
+ .ufcon = SMDKC210_UFCON_DEFAULT,
+ },
+ [2] = {
+ .hwport = 2,
+ .flags = 0,
+ .ucon = SMDKC210_UCON_DEFAULT,
+ .ulcon = SMDKC210_ULCON_DEFAULT,
+ .ufcon = SMDKC210_UFCON_DEFAULT,
+ },
+ [3] = {
+ .hwport = 3,
+ .flags = 0,
+ .ucon = SMDKC210_UCON_DEFAULT,
+ .ulcon = SMDKC210_ULCON_DEFAULT,
+ .ufcon = SMDKC210_UFCON_DEFAULT,
+ },
+};
+
+static struct s3c_sdhci_platdata smdkc210_hsmmc0_pdata __initdata = {
+ .cd_type = S3C_SDHCI_CD_GPIO,
+ .ext_cd_gpio = S5PV310_GPK0(2),
+ .ext_cd_gpio_invert = 1,
+ .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL,
+#ifdef CONFIG_S5PV310_SDHCI_CH0_8BIT
+ .max_width = 8,
+ .host_caps = MMC_CAP_8_BIT_DATA,
+#endif
+};
+
+static struct s3c_sdhci_platdata smdkc210_hsmmc1_pdata __initdata = {
+ .cd_type = S3C_SDHCI_CD_GPIO,
+ .ext_cd_gpio = S5PV310_GPK0(2),
+ .ext_cd_gpio_invert = 1,
+ .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL,
+};
+
+static struct s3c_sdhci_platdata smdkc210_hsmmc2_pdata __initdata = {
+ .cd_type = S3C_SDHCI_CD_GPIO,
+ .ext_cd_gpio = S5PV310_GPK2(2),
+ .ext_cd_gpio_invert = 1,
+ .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL,
+#ifdef CONFIG_S5PV310_SDHCI_CH2_8BIT
+ .max_width = 8,
+ .host_caps = MMC_CAP_8_BIT_DATA,
+#endif
+};
+
+static struct s3c_sdhci_platdata smdkc210_hsmmc3_pdata __initdata = {
+ .cd_type = S3C_SDHCI_CD_GPIO,
+ .ext_cd_gpio = S5PV310_GPK2(2),
+ .ext_cd_gpio_invert = 1,
+ .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL,
+};
+
+static struct resource smdkc210_smsc911x_resources[] = {
+ [0] = {
+ .start = S5PV310_PA_SROM_BANK(1),
+ .end = S5PV310_PA_SROM_BANK(1) + SZ_64K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_EINT(5),
+ .end = IRQ_EINT(5),
+ .flags = IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
+ },
+};
+
+static struct smsc911x_platform_config smsc9215_config = {
+ .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_HIGH,
+ .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
+ .flags = SMSC911X_USE_16BIT | SMSC911X_FORCE_INTERNAL_PHY,
+ .phy_interface = PHY_INTERFACE_MODE_MII,
+ .mac = {0x00, 0x80, 0x00, 0x23, 0x45, 0x67},
+};
+
+static struct platform_device smdkc210_smsc911x = {
+ .name = "smsc911x",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(smdkc210_smsc911x_resources),
+ .resource = smdkc210_smsc911x_resources,
+ .dev = {
+ .platform_data = &smsc9215_config,
+ },
+};
+
+static struct platform_device *smdkc210_devices[] __initdata = {
+ &s3c_device_hsmmc0,
+ &s3c_device_hsmmc1,
+ &s3c_device_hsmmc2,
+ &s3c_device_hsmmc3,
+ &s3c_device_rtc,
+ &s3c_device_wdt,
+ &smdkc210_smsc911x,
+};
+
+static void __init smdkc210_smsc911x_init(void)
+{
+ u32 cs1;
+
+ /* configure nCS1 width to 16 bits */
+ cs1 = __raw_readl(S5PV310_SROM_BW) &
+ ~(S5PV310_SROM_BW__CS_MASK <<
+ S5PV310_SROM_BW__NCS1__SHIFT);
+ cs1 |= ((1 << S5PV310_SROM_BW__DATAWIDTH__SHIFT) |
+ (1 << S5PV310_SROM_BW__WAITENABLE__SHIFT) |
+ (1 << S5PV310_SROM_BW__BYTEENABLE__SHIFT)) <<
+ S5PV310_SROM_BW__NCS1__SHIFT;
+ __raw_writel(cs1, S5PV310_SROM_BW);
+
+ /* set timing for nCS1 suitable for ethernet chip */
+ __raw_writel((0x1 << S5PV310_SROM_BCX__PMC__SHIFT) |
+ (0x9 << S5PV310_SROM_BCX__TACP__SHIFT) |
+ (0xc << S5PV310_SROM_BCX__TCAH__SHIFT) |
+ (0x1 << S5PV310_SROM_BCX__TCOH__SHIFT) |
+ (0x6 << S5PV310_SROM_BCX__TACC__SHIFT) |
+ (0x1 << S5PV310_SROM_BCX__TCOS__SHIFT) |
+ (0x1 << S5PV310_SROM_BCX__TACS__SHIFT), S5PV310_SROM_BC1);
+}
+
+static void __init smdkc210_map_io(void)
+{
+ s5p_init_io(NULL, 0, S5P_VA_CHIPID);
+ s3c24xx_init_clocks(24000000);
+ s3c24xx_init_uarts(smdkc210_uartcfgs, ARRAY_SIZE(smdkc210_uartcfgs));
+}
+
+static void __init smdkc210_machine_init(void)
+{
+ smdkc210_smsc911x_init();
+
+ s3c_sdhci0_set_platdata(&smdkc210_hsmmc0_pdata);
+ s3c_sdhci1_set_platdata(&smdkc210_hsmmc1_pdata);
+ s3c_sdhci2_set_platdata(&smdkc210_hsmmc2_pdata);
+ s3c_sdhci3_set_platdata(&smdkc210_hsmmc3_pdata);
+
+ platform_add_devices(smdkc210_devices, ARRAY_SIZE(smdkc210_devices));
+}
+
+MACHINE_START(SMDKC210, "SMDKC210")
+ /* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
+ .boot_params = S5P_PA_SDRAM + 0x100,
+ .init_irq = s5pv310_init_irq,
+ .map_io = smdkc210_map_io,
+ .init_machine = smdkc210_machine_init,
+ .timer = &s5pv310_timer,
+MACHINE_END
*/
#include <linux/serial_core.h>
+#include <linux/gpio.h>
+#include <linux/mmc/host.h>
+#include <linux/platform_device.h>
+#include <linux/smsc911x.h>
+#include <linux/io.h>
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
-#include <asm/hardware/cache-l2x0.h>
#include <plat/regs-serial.h>
#include <plat/s5pv310.h>
#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/sdhci.h>
#include <mach/map.h>
+#include <mach/regs-srom.h>
/* Following are default values for UCON, ULCON and UFCON UART registers */
#define SMDKV310_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
},
};
+static struct s3c_sdhci_platdata smdkv310_hsmmc0_pdata __initdata = {
+ .cd_type = S3C_SDHCI_CD_GPIO,
+ .ext_cd_gpio = S5PV310_GPK0(2),
+ .ext_cd_gpio_invert = 1,
+ .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL,
+#ifdef CONFIG_S5PV310_SDHCI_CH0_8BIT
+ .max_width = 8,
+ .host_caps = MMC_CAP_8_BIT_DATA,
+#endif
+};
+
+static struct s3c_sdhci_platdata smdkv310_hsmmc1_pdata __initdata = {
+ .cd_type = S3C_SDHCI_CD_GPIO,
+ .ext_cd_gpio = S5PV310_GPK0(2),
+ .ext_cd_gpio_invert = 1,
+ .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL,
+};
+
+static struct s3c_sdhci_platdata smdkv310_hsmmc2_pdata __initdata = {
+ .cd_type = S3C_SDHCI_CD_GPIO,
+ .ext_cd_gpio = S5PV310_GPK2(2),
+ .ext_cd_gpio_invert = 1,
+ .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL,
+#ifdef CONFIG_S5PV310_SDHCI_CH2_8BIT
+ .max_width = 8,
+ .host_caps = MMC_CAP_8_BIT_DATA,
+#endif
+};
+
+static struct s3c_sdhci_platdata smdkv310_hsmmc3_pdata __initdata = {
+ .cd_type = S3C_SDHCI_CD_GPIO,
+ .ext_cd_gpio = S5PV310_GPK2(2),
+ .ext_cd_gpio_invert = 1,
+ .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL,
+};
+
+static struct resource smdkv310_smsc911x_resources[] = {
+ [0] = {
+ .start = S5PV310_PA_SROM_BANK(1),
+ .end = S5PV310_PA_SROM_BANK(1) + SZ_64K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_EINT(5),
+ .end = IRQ_EINT(5),
+ .flags = IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
+ },
+};
+
+static struct smsc911x_platform_config smsc9215_config = {
+ .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_HIGH,
+ .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
+ .flags = SMSC911X_USE_16BIT | SMSC911X_FORCE_INTERNAL_PHY,
+ .phy_interface = PHY_INTERFACE_MODE_MII,
+ .mac = {0x00, 0x80, 0x00, 0x23, 0x45, 0x67},
+};
+
+static struct platform_device smdkv310_smsc911x = {
+ .name = "smsc911x",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(smdkv310_smsc911x_resources),
+ .resource = smdkv310_smsc911x_resources,
+ .dev = {
+ .platform_data = &smsc9215_config,
+ },
+};
+
+static struct platform_device *smdkv310_devices[] __initdata = {
+ &s3c_device_hsmmc0,
+ &s3c_device_hsmmc1,
+ &s3c_device_hsmmc2,
+ &s3c_device_hsmmc3,
+ &s3c_device_rtc,
+ &s3c_device_wdt,
+ &smdkv310_smsc911x,
+};
+
+static void __init smdkv310_smsc911x_init(void)
+{
+ u32 cs1;
+
+ /* configure nCS1 width to 16 bits */
+ cs1 = __raw_readl(S5PV310_SROM_BW) &
+ ~(S5PV310_SROM_BW__CS_MASK <<
+ S5PV310_SROM_BW__NCS1__SHIFT);
+ cs1 |= ((1 << S5PV310_SROM_BW__DATAWIDTH__SHIFT) |
+ (1 << S5PV310_SROM_BW__WAITENABLE__SHIFT) |
+ (1 << S5PV310_SROM_BW__BYTEENABLE__SHIFT)) <<
+ S5PV310_SROM_BW__NCS1__SHIFT;
+ __raw_writel(cs1, S5PV310_SROM_BW);
+
+ /* set timing for nCS1 suitable for ethernet chip */
+ __raw_writel((0x1 << S5PV310_SROM_BCX__PMC__SHIFT) |
+ (0x9 << S5PV310_SROM_BCX__TACP__SHIFT) |
+ (0xc << S5PV310_SROM_BCX__TCAH__SHIFT) |
+ (0x1 << S5PV310_SROM_BCX__TCOH__SHIFT) |
+ (0x6 << S5PV310_SROM_BCX__TACC__SHIFT) |
+ (0x1 << S5PV310_SROM_BCX__TCOS__SHIFT) |
+ (0x1 << S5PV310_SROM_BCX__TACS__SHIFT), S5PV310_SROM_BC1);
+}
+
static void __init smdkv310_map_io(void)
{
s5p_init_io(NULL, 0, S5P_VA_CHIPID);
static void __init smdkv310_machine_init(void)
{
-#ifdef CONFIG_CACHE_L2X0
- l2x0_init(S5P_VA_L2CC, 1 << 28, 0xffffffff);
-#endif
+ smdkv310_smsc911x_init();
+
+ s3c_sdhci0_set_platdata(&smdkv310_hsmmc0_pdata);
+ s3c_sdhci1_set_platdata(&smdkv310_hsmmc1_pdata);
+ s3c_sdhci2_set_platdata(&smdkv310_hsmmc2_pdata);
+ s3c_sdhci3_set_platdata(&smdkv310_hsmmc3_pdata);
+
+ platform_add_devices(smdkv310_devices, ARRAY_SIZE(smdkv310_devices));
}
MACHINE_START(SMDKV310, "SMDKV310")
* published by the Free Software Foundation.
*/
+#include <linux/platform_device.h>
#include <linux/serial_core.h>
+#include <linux/input.h>
+#include <linux/i2c.h>
+#include <linux/gpio_keys.h>
+#include <linux/gpio.h>
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
-#include <asm/hardware/cache-l2x0.h>
#include <plat/regs-serial.h>
#include <plat/s5pv310.h>
#include <plat/cpu.h>
+#include <plat/devs.h>
#include <mach/map.h>
},
};
+static struct gpio_keys_button universal_gpio_keys_tables[] = {
+ {
+ .code = KEY_VOLUMEUP,
+ .gpio = S5PV310_GPX2(0), /* XEINT16 */
+ .desc = "gpio-keys: KEY_VOLUMEUP",
+ .type = EV_KEY,
+ .active_low = 1,
+ .debounce_interval = 1,
+ }, {
+ .code = KEY_VOLUMEDOWN,
+ .gpio = S5PV310_GPX2(1), /* XEINT17 */
+ .desc = "gpio-keys: KEY_VOLUMEDOWN",
+ .type = EV_KEY,
+ .active_low = 1,
+ .debounce_interval = 1,
+ }, {
+ .code = KEY_CONFIG,
+ .gpio = S5PV310_GPX2(2), /* XEINT18 */
+ .desc = "gpio-keys: KEY_CONFIG",
+ .type = EV_KEY,
+ .active_low = 1,
+ .debounce_interval = 1,
+ }, {
+ .code = KEY_CAMERA,
+ .gpio = S5PV310_GPX2(3), /* XEINT19 */
+ .desc = "gpio-keys: KEY_CAMERA",
+ .type = EV_KEY,
+ .active_low = 1,
+ .debounce_interval = 1,
+ }, {
+ .code = KEY_OK,
+ .gpio = S5PV310_GPX3(5), /* XEINT29 */
+ .desc = "gpio-keys: KEY_OK",
+ .type = EV_KEY,
+ .active_low = 1,
+ .debounce_interval = 1,
+ },
+};
+
+static struct gpio_keys_platform_data universal_gpio_keys_data = {
+ .buttons = universal_gpio_keys_tables,
+ .nbuttons = ARRAY_SIZE(universal_gpio_keys_tables),
+};
+
+static struct platform_device universal_gpio_keys = {
+ .name = "gpio-keys",
+ .dev = {
+ .platform_data = &universal_gpio_keys_data,
+ },
+};
+
+/* I2C0 */
+static struct i2c_board_info i2c0_devs[] __initdata = {
+ /* Camera, To be updated */
+};
+
+/* I2C1 */
+static struct i2c_board_info i2c1_devs[] __initdata = {
+ /* Gyro, To be updated */
+};
+
+static struct platform_device *universal_devices[] __initdata = {
+ &universal_gpio_keys,
+ &s5p_device_onenand,
+};
+
static void __init universal_map_io(void)
{
s5p_init_io(NULL, 0, S5P_VA_CHIPID);
static void __init universal_machine_init(void)
{
-#ifdef CONFIG_CACHE_L2X0
- l2x0_init(S5P_VA_L2CC, 1 << 28, 0xffffffff);
-#endif
+ i2c_register_board_info(0, i2c0_devs, ARRAY_SIZE(i2c0_devs));
+ i2c_register_board_info(1, i2c1_devs, ARRAY_SIZE(i2c1_devs));
+
+ /* Last */
+ platform_add_devices(universal_devices, ARRAY_SIZE(universal_devices));
}
MACHINE_START(UNIVERSAL_C210, "UNIVERSAL_C210")
void s3c_i2c0_cfg_gpio(struct platform_device *dev)
{
- s3c_gpio_cfgpin(S5PV310_GPD1(0), S3C_GPIO_SFN(2));
- s3c_gpio_setpull(S5PV310_GPD1(0), S3C_GPIO_PULL_UP);
- s3c_gpio_cfgpin(S5PV310_GPD1(1), S3C_GPIO_SFN(2));
- s3c_gpio_setpull(S5PV310_GPD1(1), S3C_GPIO_PULL_UP);
+ s3c_gpio_cfgall_range(S5PV310_GPD1(0), 2,
+ S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
}
void s3c_i2c1_cfg_gpio(struct platform_device *dev)
{
- s3c_gpio_cfgpin(S5PV310_GPD1(2), S3C_GPIO_SFN(2));
- s3c_gpio_setpull(S5PV310_GPD1(2), S3C_GPIO_PULL_UP);
- s3c_gpio_cfgpin(S5PV310_GPD1(3), S3C_GPIO_SFN(2));
- s3c_gpio_setpull(S5PV310_GPD1(3), S3C_GPIO_PULL_UP);
+ s3c_gpio_cfgall_range(S5PV310_GPD1(2), 2,
+ S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
}
void s3c_i2c2_cfg_gpio(struct platform_device *dev)
{
- s3c_gpio_cfgpin(S5PV310_GPA0(6), S3C_GPIO_SFN(3));
- s3c_gpio_setpull(S5PV310_GPA0(6), S3C_GPIO_PULL_UP);
- s3c_gpio_cfgpin(S5PV310_GPA0(7), S3C_GPIO_SFN(3));
- s3c_gpio_setpull(S5PV310_GPA0(7), S3C_GPIO_PULL_UP);
+ s3c_gpio_cfgall_range(S5PV310_GPA0(6), 2,
+ S3C_GPIO_SFN(3), S3C_GPIO_PULL_UP);
}
--- /dev/null
+/*
+ * linux/arch/arm/mach-s5pv310/setup-i2c3.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *
+ * I2C3 GPIO configuration.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+struct platform_device; /* don't need the contents */
+
+#include <linux/gpio.h>
+#include <plat/iic.h>
+#include <plat/gpio-cfg.h>
+
+void s3c_i2c3_cfg_gpio(struct platform_device *dev)
+{
+ s3c_gpio_cfgall_range(S5PV310_GPA1(2), 2,
+ S3C_GPIO_SFN(3), S3C_GPIO_PULL_UP);
+}
--- /dev/null
+/*
+ * linux/arch/arm/mach-s5pv310/setup-i2c4.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *
+ * I2C4 GPIO configuration.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+struct platform_device; /* don't need the contents */
+
+#include <linux/gpio.h>
+#include <plat/iic.h>
+#include <plat/gpio-cfg.h>
+
+void s3c_i2c4_cfg_gpio(struct platform_device *dev)
+{
+ s3c_gpio_cfgall_range(S5PV310_GPB(2), 2,
+ S3C_GPIO_SFN(3), S3C_GPIO_PULL_UP);
+}
--- /dev/null
+/*
+ * linux/arch/arm/mach-s5pv310/setup-i2c5.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *
+ * I2C5 GPIO configuration.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+struct platform_device; /* don't need the contents */
+
+#include <linux/gpio.h>
+#include <plat/iic.h>
+#include <plat/gpio-cfg.h>
+
+void s3c_i2c5_cfg_gpio(struct platform_device *dev)
+{
+ s3c_gpio_cfgall_range(S5PV310_GPB(6), 2,
+ S3C_GPIO_SFN(3), S3C_GPIO_PULL_UP);
+}
--- /dev/null
+/*
+ * linux/arch/arm/mach-s5pv310/setup-i2c6.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *
+ * I2C6 GPIO configuration.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+struct platform_device; /* don't need the contents */
+
+#include <linux/gpio.h>
+#include <plat/iic.h>
+#include <plat/gpio-cfg.h>
+
+void s3c_i2c6_cfg_gpio(struct platform_device *dev)
+{
+ s3c_gpio_cfgall_range(S5PV310_GPC1(3), 2,
+ S3C_GPIO_SFN(4), S3C_GPIO_PULL_UP);
+}
--- /dev/null
+/*
+ * linux/arch/arm/mach-s5pv310/setup-i2c7.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *
+ * I2C7 GPIO configuration.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+struct platform_device; /* don't need the contents */
+
+#include <linux/gpio.h>
+#include <plat/iic.h>
+#include <plat/gpio-cfg.h>
+
+void s3c_i2c7_cfg_gpio(struct platform_device *dev)
+{
+ s3c_gpio_cfgall_range(S5PV310_GPD0(2), 2,
+ S3C_GPIO_SFN(3), S3C_GPIO_PULL_UP);
+}
--- /dev/null
+/* linux/arch/arm/mach-s5pv310/setup-sdhci-gpio.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * S5PV310 - Helper functions for setting up SDHCI device(s) GPIO (HSMMC)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/mmc/host.h>
+#include <linux/mmc/card.h>
+
+#include <plat/gpio-cfg.h>
+#include <plat/regs-sdhci.h>
+#include <plat/sdhci.h>
+
+void s5pv310_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width)
+{
+ struct s3c_sdhci_platdata *pdata = dev->dev.platform_data;
+ unsigned int gpio;
+
+ /* Set all the necessary GPK0[0:1] pins to special-function 2 */
+ for (gpio = S5PV310_GPK0(0); gpio < S5PV310_GPK0(2); gpio++) {
+ s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+ s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+ s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
+ }
+
+ switch (width) {
+ case 8:
+ for (gpio = S5PV310_GPK1(3); gpio <= S5PV310_GPK1(6); gpio++) {
+ /* Data pin GPK1[3:6] to special-funtion 3 */
+ s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(3));
+ s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP);
+ s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
+ }
+ case 4:
+ for (gpio = S5PV310_GPK0(3); gpio <= S5PV310_GPK0(6); gpio++) {
+ /* Data pin GPK0[3:6] to special-funtion 2 */
+ s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+ s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP);
+ s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
+ }
+ default:
+ break;
+ }
+
+ if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) {
+ s3c_gpio_cfgpin(S5PV310_GPK0(2), S3C_GPIO_SFN(2));
+ s3c_gpio_setpull(S5PV310_GPK0(2), S3C_GPIO_PULL_UP);
+ s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
+ }
+}
+
+void s5pv310_setup_sdhci1_cfg_gpio(struct platform_device *dev, int width)
+{
+ struct s3c_sdhci_platdata *pdata = dev->dev.platform_data;
+ unsigned int gpio;
+
+ /* Set all the necessary GPK1[0:1] pins to special-function 2 */
+ for (gpio = S5PV310_GPK1(0); gpio < S5PV310_GPK1(2); gpio++) {
+ s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+ s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+ s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
+ }
+
+ for (gpio = S5PV310_GPK1(3); gpio <= S5PV310_GPK1(6); gpio++) {
+ /* Data pin GPK1[3:6] to special-function 2 */
+ s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+ s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP);
+ s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
+ }
+
+ if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) {
+ s3c_gpio_cfgpin(S5PV310_GPK1(2), S3C_GPIO_SFN(2));
+ s3c_gpio_setpull(S5PV310_GPK1(2), S3C_GPIO_PULL_UP);
+ s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
+ }
+}
+
+void s5pv310_setup_sdhci2_cfg_gpio(struct platform_device *dev, int width)
+{
+ struct s3c_sdhci_platdata *pdata = dev->dev.platform_data;
+ unsigned int gpio;
+
+ /* Set all the necessary GPK2[0:1] pins to special-function 2 */
+ for (gpio = S5PV310_GPK2(0); gpio < S5PV310_GPK2(2); gpio++) {
+ s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+ s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+ s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
+ }
+
+ switch (width) {
+ case 8:
+ for (gpio = S5PV310_GPK3(3); gpio <= S5PV310_GPK3(6); gpio++) {
+ /* Data pin GPK3[3:6] to special-function 3 */
+ s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(3));
+ s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP);
+ s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
+ }
+ case 4:
+ for (gpio = S5PV310_GPK2(3); gpio <= S5PV310_GPK2(6); gpio++) {
+ /* Data pin GPK2[3:6] to special-function 2 */
+ s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+ s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP);
+ s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
+ }
+ default:
+ break;
+ }
+
+ if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) {
+ s3c_gpio_cfgpin(S5PV310_GPK2(2), S3C_GPIO_SFN(2));
+ s3c_gpio_setpull(S5PV310_GPK2(2), S3C_GPIO_PULL_UP);
+ s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
+ }
+}
+
+void s5pv310_setup_sdhci3_cfg_gpio(struct platform_device *dev, int width)
+{
+ struct s3c_sdhci_platdata *pdata = dev->dev.platform_data;
+ unsigned int gpio;
+
+ /* Set all the necessary GPK3[0:1] pins to special-function 2 */
+ for (gpio = S5PV310_GPK3(0); gpio < S5PV310_GPK3(2); gpio++) {
+ s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+ s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+ s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
+ }
+
+ for (gpio = S5PV310_GPK3(3); gpio <= S5PV310_GPK3(6); gpio++) {
+ /* Data pin GPK3[3:6] to special-function 2 */
+ s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+ s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP);
+ s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
+ }
+
+ if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) {
+ s3c_gpio_cfgpin(S5PV310_GPK3(2), S3C_GPIO_SFN(2));
+ s3c_gpio_setpull(S5PV310_GPK3(2), S3C_GPIO_PULL_UP);
+ s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
+ }
+}
--- /dev/null
+/* linux/arch/arm/mach-s5pv310/setup-sdhci.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * S5PV310 - Helper functions for settign up SDHCI device(s) (HSMMC)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+
+#include <linux/mmc/card.h>
+#include <linux/mmc/host.h>
+
+#include <plat/regs-sdhci.h>
+
+/* clock sources for the mmc bus clock, order as for the ctrl2[5..4] */
+
+char *s5pv310_hsmmc_clksrcs[4] = {
+ [0] = NULL,
+ [1] = NULL,
+ [2] = "sclk_mmc", /* mmc_bus */
+ [3] = NULL,
+};
+
+void s5pv310_setup_sdhci_cfg_card(struct platform_device *dev, void __iomem *r,
+ struct mmc_ios *ios, struct mmc_card *card)
+{
+ u32 ctrl2, ctrl3;
+
+ /* don't need to alter anything acording to card-type */
+
+ ctrl2 = readl(r + S3C_SDHCI_CONTROL2);
+
+ /* select base clock source to HCLK */
+
+ ctrl2 &= S3C_SDHCI_CTRL2_SELBASECLK_MASK;
+
+ /*
+ * clear async mode, enable conflict mask, rx feedback ctrl, SD
+ * clk hold and no use debounce count
+ */
+
+ ctrl2 |= (S3C64XX_SDHCI_CTRL2_ENSTAASYNCCLR |
+ S3C64XX_SDHCI_CTRL2_ENCMDCNFMSK |
+ S3C_SDHCI_CTRL2_ENFBCLKRX |
+ S3C_SDHCI_CTRL2_DFCNT_NONE |
+ S3C_SDHCI_CTRL2_ENCLKOUTHOLD);
+
+ /* Tx and Rx feedback clock delay control */
+
+ if (ios->clock < 25 * 1000000)
+ ctrl3 = (S3C_SDHCI_CTRL3_FCSEL3 |
+ S3C_SDHCI_CTRL3_FCSEL2 |
+ S3C_SDHCI_CTRL3_FCSEL1 |
+ S3C_SDHCI_CTRL3_FCSEL0);
+ else
+ ctrl3 = (S3C_SDHCI_CTRL3_FCSEL1 | S3C_SDHCI_CTRL3_FCSEL0);
+
+ writel(ctrl2, r + S3C_SDHCI_CONTROL2);
+ writel(ctrl3, r + S3C_SDHCI_CONTROL3);
+}
{
unsigned int cur = sa11x0_getspeed(0);
unsigned int new_ppcr;
-
struct cpufreq_freqs freqs;
+
+ new_ppcr = sa11x0_freq_to_ppcr(target_freq);
switch(relation){
case CPUFREQ_RELATION_L:
- new_ppcr = sa11x0_freq_to_ppcr(target_freq);
if (sa11x0_ppcr_to_freq(new_ppcr) > policy->max)
new_ppcr--;
break;
case CPUFREQ_RELATION_H:
- new_ppcr = sa11x0_freq_to_ppcr(target_freq);
if ((sa11x0_ppcr_to_freq(new_ppcr) > target_freq) &&
(sa11x0_ppcr_to_freq(new_ppcr - 1) >= policy->min))
new_ppcr--;
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
-#include <linux/mmc/host.h>
#include <linux/mmc/sh_mmcif.h>
#include <linux/i2c.h>
#include <linux/i2c/tsc2007.h>
#include <linux/input/sh_keysc.h>
#include <linux/usb/r8a66597.h>
+#include <media/sh_mobile_ceu.h>
+#include <media/sh_mobile_csi2.h>
+#include <media/soc_camera.h>
+
#include <sound/sh_fsi.h>
#include <video/sh_mobile_hdmi.h>
/* SH_MMCIF */
static struct resource sh_mmcif_resources[] = {
[0] = {
- .name = "SH_MMCIF",
+ .name = "MMCIF",
.start = 0xE6BD0000,
.end = 0xE6BD00FF,
.flags = IORESOURCE_MEM,
.resource = usb1_host_resources,
};
+const static struct fb_videomode ap4evb_lcdc_modes[] = {
+ {
+#ifdef CONFIG_AP4EVB_QHD
+ .name = "R63302(QHD)",
+ .xres = 544,
+ .yres = 961,
+ .left_margin = 72,
+ .right_margin = 600,
+ .hsync_len = 16,
+ .upper_margin = 8,
+ .lower_margin = 8,
+ .vsync_len = 2,
+ .sync = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_HOR_HIGH_ACT,
+#else
+ .name = "WVGA Panel",
+ .xres = 800,
+ .yres = 480,
+ .left_margin = 220,
+ .right_margin = 110,
+ .hsync_len = 70,
+ .upper_margin = 20,
+ .lower_margin = 5,
+ .vsync_len = 5,
+ .sync = 0,
+#endif
+ },
+};
+
static struct sh_mobile_lcdc_info lcdc_info = {
.ch[0] = {
.chan = LCDC_CHAN_MAINLCD,
.bpp = 16,
+ .lcd_cfg = ap4evb_lcdc_modes,
+ .num_cfg = ARRAY_SIZE(ap4evb_lcdc_modes),
}
};
/* FSI */
#define IRQ_FSI evt2irq(0x1840)
-#define FSIACKCR 0xE6150018
-static void fsiackcr_init(struct clk *clk)
-{
- u32 status = __raw_readl(clk->enable_reg);
-
- /* use external clock */
- status &= ~0x000000ff;
- status |= 0x00000080;
- __raw_writel(status, clk->enable_reg);
-}
-
-static struct clk_ops fsiackcr_clk_ops = {
- .init = fsiackcr_init,
-};
-
-static struct clk fsiackcr_clk = {
- .ops = &fsiackcr_clk_ops,
- .enable_reg = (void __iomem *)FSIACKCR,
- .rate = 0, /* unknown */
-};
-
static struct sh_fsi_platform_info fsi_info = {
.porta_flags = SH_FSI_BRS_INV |
SH_FSI_OUT_SLAVE_MODE |
.interface_type = RGB24,
.clock_divider = 1,
.flags = LCDC_FLAGS_DWPOL,
- .lcd_cfg = {
- .name = "HDMI",
- /* So far only 720p is supported */
- .xres = 1280,
- .yres = 720,
- /*
- * If left and right margins are not multiples of 8,
- * LDHAJR will be adjusted accordingly by the LCDC
- * driver. Until we start using EDID, these values
- * might have to be adjusted for different monitors.
- */
- .left_margin = 200,
- .right_margin = 88,
- .hsync_len = 48,
- .upper_margin = 20,
- .lower_margin = 5,
- .vsync_len = 5,
- .pixclock = 13468,
- .sync = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_HOR_HIGH_ACT,
- },
}
};
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = intcs_evt2irq(0x17a0),
+ .start = intcs_evt2irq(0x1780),
.flags = IORESOURCE_IRQ,
},
};
},
};
+static struct i2c_board_info imx074_info = {
+ I2C_BOARD_INFO("imx074", 0x1a),
+};
+
+struct soc_camera_link imx074_link = {
+ .bus_id = 0,
+ .board_info = &imx074_info,
+ .i2c_adapter_id = 0,
+ .module_name = "imx074",
+};
+
+static struct platform_device ap4evb_camera = {
+ .name = "soc-camera-pdrv",
+ .id = 0,
+ .dev = {
+ .platform_data = &imx074_link,
+ },
+};
+
+static struct sh_csi2_client_config csi2_clients[] = {
+ {
+ .phy = SH_CSI2_PHY_MAIN,
+ .lanes = 3,
+ .channel = 0,
+ .pdev = &ap4evb_camera,
+ },
+};
+
+static struct sh_csi2_pdata csi2_info = {
+ .type = SH_CSI2C,
+ .clients = csi2_clients,
+ .num_clients = ARRAY_SIZE(csi2_clients),
+ .flags = SH_CSI2_ECC | SH_CSI2_CRC,
+};
+
+static struct resource csi2_resources[] = {
+ [0] = {
+ .name = "CSI2",
+ .start = 0xffc90000,
+ .end = 0xffc90fff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = intcs_evt2irq(0x17a0),
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device csi2_device = {
+ .name = "sh-mobile-csi2",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(csi2_resources),
+ .resource = csi2_resources,
+ .dev = {
+ .platform_data = &csi2_info,
+ },
+};
+
+static struct sh_mobile_ceu_info sh_mobile_ceu_info = {
+ .flags = SH_CEU_FLAG_USE_8BIT_BUS,
+ .csi2_dev = &csi2_device.dev,
+};
+
+static struct resource ceu_resources[] = {
+ [0] = {
+ .name = "CEU",
+ .start = 0xfe910000,
+ .end = 0xfe91009f,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = intcs_evt2irq(0x880),
+ .flags = IORESOURCE_IRQ,
+ },
+ [2] = {
+ /* place holder for contiguous memory */
+ },
+};
+
+static struct platform_device ceu_device = {
+ .name = "sh_mobile_ceu",
+ .id = 0, /* "ceu0" clock */
+ .num_resources = ARRAY_SIZE(ceu_resources),
+ .resource = ceu_resources,
+ .dev = {
+ .platform_data = &sh_mobile_ceu_info,
+ },
+};
+
static struct platform_device *ap4evb_devices[] __initdata = {
&leds_device,
&nor_flash_device,
&lcdc1_device,
&lcdc_device,
&hdmi_device,
+ &csi2_device,
+ &ceu_device,
+ &ap4evb_camera,
};
static int __init hdmi_init_pm_clock(void)
goto out;
}
- ret = clk_set_parent(&pllc2_clk, &dv_clki_div2_clk);
+ ret = clk_set_parent(&sh7372_pllc2_clk, &sh7372_dv_clki_div2_clk);
if (ret < 0) {
- pr_err("Cannot set PLLC2 parent: %d, %d users\n", ret, pllc2_clk.usecount);
+ pr_err("Cannot set PLLC2 parent: %d, %d users\n", ret, sh7372_pllc2_clk.usecount);
goto out;
}
- pr_debug("PLLC2 initial frequency %lu\n", clk_get_rate(&pllc2_clk));
+ pr_debug("PLLC2 initial frequency %lu\n", clk_get_rate(&sh7372_pllc2_clk));
- rate = clk_round_rate(&pllc2_clk, 594000000);
+ rate = clk_round_rate(&sh7372_pllc2_clk, 594000000);
if (rate < 0) {
pr_err("Cannot get suitable rate: %ld\n", rate);
ret = rate;
goto out;
}
- ret = clk_set_rate(&pllc2_clk, rate);
+ ret = clk_set_rate(&sh7372_pllc2_clk, rate);
if (ret < 0) {
pr_err("Cannot set rate %ld: %d\n", rate, ret);
goto out;
pr_debug("PLLC2 set frequency %lu\n", rate);
- ret = clk_set_parent(hdmi_ick, &pllc2_clk);
+ ret = clk_set_parent(hdmi_ick, &sh7372_pllc2_clk);
if (ret < 0) {
pr_err("Cannot set HDMI parent: %d\n", ret);
goto out;
device_initcall(hdmi_init_pm_clock);
+#define FSIACK_DUMMY_RATE 48000
+static int __init fsi_init_pm_clock(void)
+{
+ struct clk *fsia_ick;
+ int ret;
+
+ /*
+ * FSIACK is connected to AK4642,
+ * and the rate is depend on playing sound rate.
+ * So, set dummy rate (= 48k) here
+ */
+ ret = clk_set_rate(&sh7372_fsiack_clk, FSIACK_DUMMY_RATE);
+ if (ret < 0) {
+ pr_err("Cannot set FSIACK dummy rate: %d\n", ret);
+ return ret;
+ }
+
+ fsia_ick = clk_get(&fsi_device.dev, "icka");
+ if (IS_ERR(fsia_ick)) {
+ ret = PTR_ERR(fsia_ick);
+ pr_err("Cannot get FSI ICK: %d\n", ret);
+ return ret;
+ }
+
+ ret = clk_set_parent(fsia_ick, &sh7372_fsiack_clk);
+ if (ret < 0) {
+ pr_err("Cannot set FSI-A parent: %d\n", ret);
+ goto out;
+ }
+
+ ret = clk_set_rate(fsia_ick, FSIACK_DUMMY_RATE);
+ if (ret < 0)
+ pr_err("Cannot set FSI-A rate: %d\n", ret);
+
+out:
+ clk_put(fsia_ick);
+
+ return ret;
+}
+device_initcall(fsi_init_pm_clock);
+
/*
* FIXME !!
*
* gpio_no_direction
- * gpio_pull_up
* are quick_hack.
*
* current gpio frame work doesn't have
__raw_writeb(0x00, addr);
}
-static void __init gpio_pull_up(u32 addr)
-{
- u8 data = __raw_readb(addr);
-
- data &= 0x0F;
- data |= 0xC0;
- __raw_writeb(data, addr);
-}
-
/* TouchScreen */
+#ifdef CONFIG_AP4EVB_QHD
+# define GPIO_TSC_IRQ GPIO_FN_IRQ28_123
+# define GPIO_TSC_PORT GPIO_PORT123
+#else /* WVGA */
+# define GPIO_TSC_IRQ GPIO_FN_IRQ7_40
+# define GPIO_TSC_PORT GPIO_PORT40
+#endif
+
#define IRQ28 evt2irq(0x3380) /* IRQ28A */
#define IRQ7 evt2irq(0x02e0) /* IRQ7A */
static int ts_get_pendown_state(void)
{
- int val1, val2;
+ int val;
- gpio_free(GPIO_FN_IRQ28_123);
- gpio_free(GPIO_FN_IRQ7_40);
+ gpio_free(GPIO_TSC_IRQ);
- gpio_request(GPIO_PORT123, NULL);
- gpio_request(GPIO_PORT40, NULL);
+ gpio_request(GPIO_TSC_PORT, NULL);
- gpio_direction_input(GPIO_PORT123);
- gpio_direction_input(GPIO_PORT40);
+ gpio_direction_input(GPIO_TSC_PORT);
- val1 = gpio_get_value(GPIO_PORT123);
- val2 = gpio_get_value(GPIO_PORT40);
+ val = gpio_get_value(GPIO_TSC_PORT);
- gpio_request(GPIO_FN_IRQ28_123, NULL); /* for QHD */
- gpio_request(GPIO_FN_IRQ7_40, NULL); /* for WVGA */
+ gpio_request(GPIO_TSC_IRQ, NULL);
- return val1 ^ val2;
+ return !val;
}
-#define PORT40CR 0xE6051028
-#define PORT123CR 0xE605007B
static int ts_init(void)
{
- gpio_request(GPIO_FN_IRQ28_123, NULL); /* for QHD */
- gpio_request(GPIO_FN_IRQ7_40, NULL); /* for WVGA */
-
- gpio_pull_up(PORT40CR);
- gpio_pull_up(PORT123CR);
+ gpio_request(GPIO_TSC_IRQ, NULL);
return 0;
}
clk_put(clk);
}
- /* change parent of FSI A */
- clk = clk_get(NULL, "fsia_clk");
- if (!IS_ERR(clk)) {
- clk_register(&fsiackcr_clk);
- clk_set_parent(clk, &fsiackcr_clk);
- clk_put(clk);
- }
-
/*
* set irq priority, to avoid sound chopping
* when NFS rootfs is used
ARRAY_SIZE(i2c1_devices));
#ifdef CONFIG_AP4EVB_QHD
+
/*
- * QHD
+ * For QHD Panel (MIPI-DSI, CONFIG_AP4EVB_QHD=y) and
+ * IRQ28 for Touch Panel, set dip switches S3, S43 as OFF, ON.
*/
/* enable KEYSC */
lcdc_info.ch[0].interface_type = RGB24;
lcdc_info.ch[0].clock_divider = 1;
lcdc_info.ch[0].flags = LCDC_FLAGS_DWPOL;
- lcdc_info.ch[0].lcd_cfg.name = "R63302(QHD)";
- lcdc_info.ch[0].lcd_cfg.xres = 544;
- lcdc_info.ch[0].lcd_cfg.yres = 961;
- lcdc_info.ch[0].lcd_cfg.left_margin = 72;
- lcdc_info.ch[0].lcd_cfg.right_margin = 600;
- lcdc_info.ch[0].lcd_cfg.hsync_len = 16;
- lcdc_info.ch[0].lcd_cfg.upper_margin = 8;
- lcdc_info.ch[0].lcd_cfg.lower_margin = 8;
- lcdc_info.ch[0].lcd_cfg.vsync_len = 2;
- lcdc_info.ch[0].lcd_cfg.sync = FB_SYNC_VERT_HIGH_ACT |
- FB_SYNC_HOR_HIGH_ACT;
lcdc_info.ch[0].lcd_size_cfg.width = 44;
lcdc_info.ch[0].lcd_size_cfg.height = 79;
#else
/*
- * WVGA
+ * For WVGA Panel (18-bit RGB, CONFIG_AP4EVB_WVGA=y) and
+ * IRQ7 for Touch Panel, set dip switches S3, S43 to ON, OFF.
*/
+
gpio_request(GPIO_FN_LCDD17, NULL);
gpio_request(GPIO_FN_LCDD16, NULL);
gpio_request(GPIO_FN_LCDD15, NULL);
lcdc_info.ch[0].interface_type = RGB18;
lcdc_info.ch[0].clock_divider = 2;
lcdc_info.ch[0].flags = 0;
- lcdc_info.ch[0].lcd_cfg.name = "WVGA Panel";
- lcdc_info.ch[0].lcd_cfg.xres = 800;
- lcdc_info.ch[0].lcd_cfg.yres = 480;
- lcdc_info.ch[0].lcd_cfg.left_margin = 220;
- lcdc_info.ch[0].lcd_cfg.right_margin = 110;
- lcdc_info.ch[0].lcd_cfg.hsync_len = 70;
- lcdc_info.ch[0].lcd_cfg.upper_margin = 20;
- lcdc_info.ch[0].lcd_cfg.lower_margin = 5;
- lcdc_info.ch[0].lcd_cfg.vsync_len = 5;
- lcdc_info.ch[0].lcd_cfg.sync = 0;
lcdc_info.ch[0].lcd_size_cfg.width = 152;
lcdc_info.ch[0].lcd_size_cfg.height = 91;
i2c_register_board_info(0, &tsc_device, 1);
#endif /* CONFIG_AP4EVB_QHD */
+ /* CEU */
+
+ /*
+ * TODO: reserve memory for V4L2 DMA buffers, when a suitable API
+ * becomes available
+ */
+
+ /* MIPI-CSI stuff */
+ gpio_request(GPIO_FN_VIO_CKO, NULL);
+
+ clk = clk_get(NULL, "vck1_clk");
+ if (!IS_ERR(clk)) {
+ clk_set_rate(clk, clk_round_rate(clk, 13000000));
+ clk_enable(clk);
+ clk_put(clk);
+ }
+
sh7372_add_standard_devices();
/* HDMI */
shmobile_timer.init();
/* External clock source */
- clk_set_rate(&dv_clki_clk, 27000000);
+ clk_set_rate(&sh7372_dv_clki_clk, 27000000);
}
static struct sys_timer ap4evb_timer = {
CLKDEV_DEV_ID("sh-sci.3", &mstp_clks[SYMSTP001]), /* SCIFA3 */
CLKDEV_DEV_ID("sh-sci.4", &mstp_clks[SYMSTP000]), /* SCIFA4 */
CLKDEV_DEV_ID("sh_siu", &mstp_clks[SYMSTP231]), /* SIU */
- CLKDEV_CON_ID("cmt1", &mstp_clks[SYMSTP229]), /* CMT10 */
+ CLKDEV_DEV_ID("sh_cmt.10", &mstp_clks[SYMSTP229]), /* CMT10 */
CLKDEV_DEV_ID("sh_irda", &mstp_clks[SYMSTP225]), /* IRDA */
CLKDEV_DEV_ID("i2c-sh_mobile.1", &mstp_clks[SYMSTP223]), /* IIC1 */
CLKDEV_DEV_ID("r8a66597_hcd.0", &mstp_clks[SYMSTP222]), /* USBHS */
#define SMSTPCR4 0xe6150140
/* Platforms must set frequency on their DV_CLKI pin */
-struct clk dv_clki_clk = {
+struct clk sh7372_dv_clki_clk = {
};
/* Fixed 32 KHz root clock from EXTALR pin */
};
/* Divide dv_clki by two */
-struct clk dv_clki_div2_clk = {
+struct clk sh7372_dv_clki_div2_clk = {
.ops = &div2_clk_ops,
- .parent = &dv_clki_clk,
+ .parent = &sh7372_dv_clki_clk,
};
/* Divide extal1 by two */
static struct clk *pllc2_parent[] = {
[0] = &extal1_div2_clk,
[1] = &extal2_div2_clk,
- [2] = &dv_clki_div2_clk,
+ [2] = &sh7372_dv_clki_div2_clk,
};
/* Only multipliers 20 * 2 to 46 * 2 are valid, last entry for CPUFREQ_TABLE_END */
.set_parent = pllc2_set_parent,
};
-struct clk pllc2_clk = {
+struct clk sh7372_pllc2_clk = {
.ops = &pllc2_clk_ops,
.parent = &extal1_div2_clk,
.freq_table = pllc2_freq_table,
.parent_num = ARRAY_SIZE(pllc2_parent),
};
+/* External input clock (pin name: FSIACK/FSIBCK ) */
+struct clk sh7372_fsiack_clk = {
+};
+
+struct clk sh7372_fsibck_clk = {
+};
+
static struct clk *main_clks[] = {
- &dv_clki_clk,
+ &sh7372_dv_clki_clk,
&r_clk,
&sh7372_extal1_clk,
&sh7372_extal2_clk,
- &dv_clki_div2_clk,
+ &sh7372_dv_clki_div2_clk,
&extal1_div2_clk,
&extal2_div2_clk,
&extal2_div4_clk,
&pllc0_clk,
&pllc1_clk,
&pllc1_div2_clk,
- &pllc2_clk,
+ &sh7372_pllc2_clk,
+ &sh7372_fsiack_clk,
+ &sh7372_fsibck_clk,
};
static void div4_kick(struct clk *clk)
};
enum { DIV6_VCK1, DIV6_VCK2, DIV6_VCK3, DIV6_FMSI, DIV6_FMSO,
- DIV6_FSIA, DIV6_FSIB, DIV6_SUB, DIV6_SPU,
+ DIV6_SUB, DIV6_SPU,
DIV6_VOU, DIV6_DSIT, DIV6_DSI0P, DIV6_DSI1P,
DIV6_NR };
[DIV6_VCK3] = SH_CLK_DIV6(&pllc1_div2_clk, VCLKCR3, 0),
[DIV6_FMSI] = SH_CLK_DIV6(&pllc1_div2_clk, FMSICKCR, 0),
[DIV6_FMSO] = SH_CLK_DIV6(&pllc1_div2_clk, FMSOCKCR, 0),
- [DIV6_FSIA] = SH_CLK_DIV6(&pllc1_div2_clk, FSIACKCR, 0),
- [DIV6_FSIB] = SH_CLK_DIV6(&pllc1_div2_clk, FSIBCKCR, 0),
[DIV6_SUB] = SH_CLK_DIV6(&sh7372_extal2_clk, SUBCKCR, 0),
[DIV6_SPU] = SH_CLK_DIV6(&pllc1_div2_clk, SPUCKCR, 0),
[DIV6_VOU] = SH_CLK_DIV6(&pllc1_div2_clk, VOUCKCR, 0),
[DIV6_DSI1P] = SH_CLK_DIV6(&pllc1_div2_clk, DSI1PCKCR, 0),
};
-enum { DIV6_HDMI, DIV6_REPARENT_NR };
+enum { DIV6_HDMI, DIV6_FSIA, DIV6_FSIB, DIV6_REPARENT_NR };
/* Indices are important - they are the actual src selecting values */
static struct clk *hdmi_parent[] = {
[0] = &pllc1_div2_clk,
- [1] = &pllc2_clk,
- [2] = &dv_clki_clk,
+ [1] = &sh7372_pllc2_clk,
+ [2] = &sh7372_dv_clki_clk,
[3] = NULL, /* pllc2_div4 not implemented yet */
};
+static struct clk *fsiackcr_parent[] = {
+ [0] = &pllc1_div2_clk,
+ [1] = &sh7372_pllc2_clk,
+ [2] = &sh7372_fsiack_clk, /* external input for FSI A */
+ [3] = NULL, /* setting prohibited */
+};
+
+static struct clk *fsibckcr_parent[] = {
+ [0] = &pllc1_div2_clk,
+ [1] = &sh7372_pllc2_clk,
+ [2] = &sh7372_fsibck_clk, /* external input for FSI B */
+ [3] = NULL, /* setting prohibited */
+};
+
static struct clk div6_reparent_clks[DIV6_REPARENT_NR] = {
[DIV6_HDMI] = SH_CLK_DIV6_EXT(&pllc1_div2_clk, HDMICKCR, 0,
hdmi_parent, ARRAY_SIZE(hdmi_parent), 6, 2),
+ [DIV6_FSIA] = SH_CLK_DIV6_EXT(&pllc1_div2_clk, FSIACKCR, 0,
+ fsiackcr_parent, ARRAY_SIZE(fsiackcr_parent), 6, 2),
+ [DIV6_FSIB] = SH_CLK_DIV6_EXT(&pllc1_div2_clk, FSIBCKCR, 0,
+ fsibckcr_parent, ARRAY_SIZE(fsibckcr_parent), 6, 2),
};
enum { MSTP001,
MSTP131, MSTP130,
- MSTP129, MSTP128, MSTP127, MSTP126,
+ MSTP129, MSTP128, MSTP127, MSTP126, MSTP125,
MSTP118, MSTP117, MSTP116,
MSTP106, MSTP101, MSTP100,
MSTP223,
[MSTP128] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 28, 0), /* VEU0 */
[MSTP127] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 27, 0), /* CEU */
[MSTP126] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 26, 0), /* CSI2 */
+ [MSTP125] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR1, 25, 0), /* TMU0 */
[MSTP118] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 18, 0), /* DSITX */
[MSTP117] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 17, 0), /* LCDC1 */
[MSTP116] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR1, 16, 0), /* IIC0 */
[MSTP201] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 1, 0), /* SCIFA3 */
[MSTP200] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 0, 0), /* SCIFA4 */
[MSTP329] = MSTP(&r_clk, SMSTPCR3, 29, 0), /* CMT10 */
- [MSTP328] = MSTP(&div6_clks[DIV6_SPU], SMSTPCR3, 28, 0), /* FSIA */
+ [MSTP328] = MSTP(&div6_clks[DIV6_SPU], SMSTPCR3, 28, 0), /* FSI2 */
[MSTP323] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR3, 23, 0), /* IIC1 */
[MSTP322] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR3, 22, 0), /* USB0 */
[MSTP314] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 14, 0), /* SDHI0 */
#define CLKDEV_CON_ID(_id, _clk) { .con_id = _id, .clk = _clk }
#define CLKDEV_DEV_ID(_id, _clk) { .dev_id = _id, .clk = _clk }
+#define CLKDEV_ICK_ID(_cid, _did, _clk) { .con_id = _cid, .dev_id = _did, .clk = _clk }
static struct clk_lookup lookups[] = {
/* main clocks */
- CLKDEV_CON_ID("dv_clki_div2_clk", &dv_clki_div2_clk),
+ CLKDEV_CON_ID("dv_clki_div2_clk", &sh7372_dv_clki_div2_clk),
CLKDEV_CON_ID("r_clk", &r_clk),
CLKDEV_CON_ID("extal1", &sh7372_extal1_clk),
CLKDEV_CON_ID("extal2", &sh7372_extal2_clk),
CLKDEV_CON_ID("pllc0_clk", &pllc0_clk),
CLKDEV_CON_ID("pllc1_clk", &pllc1_clk),
CLKDEV_CON_ID("pllc1_div2_clk", &pllc1_div2_clk),
- CLKDEV_CON_ID("pllc2_clk", &pllc2_clk),
+ CLKDEV_CON_ID("pllc2_clk", &sh7372_pllc2_clk),
/* DIV4 clocks */
CLKDEV_CON_ID("i_clk", &div4_clks[DIV4_I]),
CLKDEV_CON_ID("vck3_clk", &div6_clks[DIV6_VCK3]),
CLKDEV_CON_ID("fmsi_clk", &div6_clks[DIV6_FMSI]),
CLKDEV_CON_ID("fmso_clk", &div6_clks[DIV6_FMSO]),
- CLKDEV_CON_ID("fsia_clk", &div6_clks[DIV6_FSIA]),
- CLKDEV_CON_ID("fsib_clk", &div6_clks[DIV6_FSIB]),
+ CLKDEV_CON_ID("fsia_clk", &div6_reparent_clks[DIV6_FSIA]),
+ CLKDEV_CON_ID("fsib_clk", &div6_reparent_clks[DIV6_FSIB]),
CLKDEV_CON_ID("sub_clk", &div6_clks[DIV6_SUB]),
CLKDEV_CON_ID("spu_clk", &div6_clks[DIV6_SPU]),
CLKDEV_CON_ID("vou_clk", &div6_clks[DIV6_VOU]),
CLKDEV_DEV_ID("uio_pdrv_genirq.1", &mstp_clks[MSTP128]), /* VEU0 */
CLKDEV_DEV_ID("sh_mobile_ceu.0", &mstp_clks[MSTP127]), /* CEU */
CLKDEV_DEV_ID("sh-mobile-csi2.0", &mstp_clks[MSTP126]), /* CSI2 */
+ CLKDEV_DEV_ID("sh_tmu.0", &mstp_clks[MSTP125]), /* TMU00 */
+ CLKDEV_DEV_ID("sh_tmu.1", &mstp_clks[MSTP125]), /* TMU01 */
CLKDEV_DEV_ID("sh-mipi-dsi.0", &mstp_clks[MSTP118]), /* DSITX */
CLKDEV_DEV_ID("sh_mobile_lcdc_fb.1", &mstp_clks[MSTP117]), /* LCDC1 */
CLKDEV_DEV_ID("i2c-sh_mobile.0", &mstp_clks[MSTP116]), /* IIC0 */
CLKDEV_DEV_ID("sh-sci.2", &mstp_clks[MSTP202]), /* SCIFA2 */
CLKDEV_DEV_ID("sh-sci.3", &mstp_clks[MSTP201]), /* SCIFA3 */
CLKDEV_DEV_ID("sh-sci.4", &mstp_clks[MSTP200]), /* SCIFA4 */
- CLKDEV_CON_ID("cmt1", &mstp_clks[MSTP329]), /* CMT10 */
+ CLKDEV_DEV_ID("sh_cmt.10", &mstp_clks[MSTP329]), /* CMT10 */
CLKDEV_DEV_ID("sh_fsi2", &mstp_clks[MSTP328]), /* FSI2 */
CLKDEV_DEV_ID("i2c-sh_mobile.1", &mstp_clks[MSTP323]), /* IIC1 */
CLKDEV_DEV_ID("r8a66597_hcd.0", &mstp_clks[MSTP323]), /* USB0 */
CLKDEV_DEV_ID("r8a66597_hcd.1", &mstp_clks[MSTP406]), /* USB1 */
CLKDEV_DEV_ID("r8a66597_udc.1", &mstp_clks[MSTP406]), /* USB1 */
CLKDEV_DEV_ID("sh_keysc.0", &mstp_clks[MSTP403]), /* KEYSC */
- {.con_id = "ick", .dev_id = "sh-mobile-hdmi", .clk = &div6_reparent_clks[DIV6_HDMI]},
+
+ CLKDEV_ICK_ID("ick", "sh-mobile-hdmi", &div6_reparent_clks[DIV6_HDMI]),
+ CLKDEV_ICK_ID("icka", "sh_fsi2", &div6_reparent_clks[DIV6_FSIA]),
+ CLKDEV_ICK_ID("ickb", "sh_fsi2", &div6_reparent_clks[DIV6_FSIB]),
};
void __init sh7372_clock_init(void)
ret = sh_clk_div6_register(div6_clks, DIV6_NR);
if (!ret)
- ret = sh_clk_div6_reparent_register(div6_reparent_clks, DIV6_NR);
+ ret = sh_clk_div6_reparent_register(div6_reparent_clks, DIV6_REPARENT_NR);
if (!ret)
ret = sh_clk_mstp32_register(mstp_clks, MSTP_NR);
CLKDEV_DEV_ID("sh-sci.3", &mstp_clks[MSTP201]), /* SCIFA3 */
CLKDEV_DEV_ID("sh-sci.4", &mstp_clks[MSTP200]), /* SCIFA4 */
CLKDEV_DEV_ID("sh-sci.6", &mstp_clks[MSTP331]), /* SCIFA6 */
- CLKDEV_CON_ID("cmt1", &mstp_clks[MSTP329]), /* CMT10 */
+ CLKDEV_DEV_ID("sh_cmt.10", &mstp_clks[MSTP329]), /* CMT10 */
CLKDEV_DEV_ID("sh_irda", &mstp_clks[MSTP325]), /* IRDA */
CLKDEV_DEV_ID("i2c-sh_mobile.1", &mstp_clks[MSTP323]), /* IIC1 */
CLKDEV_DEV_ID("r8a66597_hcd.0", &mstp_clks[MSTP322]), /* USBHS */
SHDMA_SLAVE_SDHI2_TX,
};
-extern struct clk dv_clki_clk;
-extern struct clk dv_clki_div2_clk;
-extern struct clk pllc2_clk;
+extern struct clk sh7372_extal1_clk;
+extern struct clk sh7372_extal2_clk;
+extern struct clk sh7372_dv_clki_clk;
+extern struct clk sh7372_dv_clki_div2_clk;
+extern struct clk sh7372_pllc2_clk;
+extern struct clk sh7372_fsiack_clk;
+extern struct clk sh7372_fsibck_clk;
#endif /* __ASM_SH7372_H__ */
INTCS,
/* interrupt sources INTCS */
+
+ /* IRQ0S - IRQ31S */
VEU_VEU0, VEU_VEU1, VEU_VEU2, VEU_VEU3,
RTDMAC_1_DEI0, RTDMAC_1_DEI1, RTDMAC_1_DEI2, RTDMAC_1_DEI3,
CEU, BEU_BEU0, BEU_BEU1, BEU_BEU2,
+ /* MFI */
+ /* BBIF2 */
VPU,
TSIF1,
_3DG_SGX530,
IIC2_ALI2, IIC2_TACKI2, IIC2_WAITI2, IIC2_DTEI2,
IPMMU_IPMMUR, IPMMU_IPMMUR2,
RTDMAC_2_DEI4, RTDMAC_2_DEI5, RTDMAC_2_DADERR,
+ /* KEYSC */
+ /* TTI20 */
MSIOF,
IIC0_ALI0, IIC0_TACKI0, IIC0_WAITI0, IIC0_DTEI0,
TMU_TUNI0, TMU_TUNI1, TMU_TUNI2,
CMT0,
TSIF0,
+ /* CMT2 */
LMB,
CTI,
+ /* RWDT0 */
ICB,
JPU_JPEG,
LCDC,
CSIRX,
DSITX_DSITX0,
DSITX_DSITX1,
+ /* SPU2 */
+ /* FSI */
+ /* FMSI */
+ /* HDMI */
TMU1_TUNI0, TMU1_TUNI1, TMU1_TUNI2,
CMT4,
DSITX1_DSITX1_0,
DSITX1_DSITX1_1,
+ /* MFIS2 */
CPORTS2R,
+ /* CEC */
JPU6E,
/* interrupt groups INTCS */
};
static struct intc_vect intcs_vectors[] = {
+ /* IRQ0S - IRQ31S */
INTCS_VECT(VEU_VEU0, 0x700), INTCS_VECT(VEU_VEU1, 0x720),
INTCS_VECT(VEU_VEU2, 0x740), INTCS_VECT(VEU_VEU3, 0x760),
INTCS_VECT(RTDMAC_1_DEI0, 0x800), INTCS_VECT(RTDMAC_1_DEI1, 0x820),
INTCS_VECT(RTDMAC_1_DEI2, 0x840), INTCS_VECT(RTDMAC_1_DEI3, 0x860),
INTCS_VECT(CEU, 0x880), INTCS_VECT(BEU_BEU0, 0x8a0),
INTCS_VECT(BEU_BEU1, 0x8c0), INTCS_VECT(BEU_BEU2, 0x8e0),
+ /* MFI */
+ /* BBIF2 */
INTCS_VECT(VPU, 0x980),
INTCS_VECT(TSIF1, 0x9a0),
INTCS_VECT(_3DG_SGX530, 0x9e0),
INTCS_VECT(IPMMU_IPMMUR, 0xb00), INTCS_VECT(IPMMU_IPMMUR2, 0xb20),
INTCS_VECT(RTDMAC_2_DEI4, 0xb80), INTCS_VECT(RTDMAC_2_DEI5, 0xba0),
INTCS_VECT(RTDMAC_2_DADERR, 0xbc0),
+ /* KEYSC */
+ /* TTI20 */
+ INTCS_VECT(MSIOF, 0x0d20),
INTCS_VECT(IIC0_ALI0, 0xe00), INTCS_VECT(IIC0_TACKI0, 0xe20),
INTCS_VECT(IIC0_WAITI0, 0xe40), INTCS_VECT(IIC0_DTEI0, 0xe60),
INTCS_VECT(TMU_TUNI0, 0xe80), INTCS_VECT(TMU_TUNI1, 0xea0),
INTCS_VECT(TMU_TUNI2, 0xec0),
INTCS_VECT(CMT0, 0xf00),
INTCS_VECT(TSIF0, 0xf20),
+ /* CMT2 */
INTCS_VECT(LMB, 0xf60),
INTCS_VECT(CTI, 0x400),
+ /* RWDT0 */
INTCS_VECT(ICB, 0x480),
INTCS_VECT(JPU_JPEG, 0x560),
INTCS_VECT(LCDC, 0x580),
INTCS_VECT(CSIRX, 0x17a0),
INTCS_VECT(DSITX_DSITX0, 0x17c0),
INTCS_VECT(DSITX_DSITX1, 0x17e0),
+ /* SPU2 */
+ /* FSI */
+ /* FMSI */
+ /* HDMI */
INTCS_VECT(TMU1_TUNI0, 0x1900), INTCS_VECT(TMU1_TUNI1, 0x1920),
INTCS_VECT(TMU1_TUNI2, 0x1940),
INTCS_VECT(CMT4, 0x1980),
INTCS_VECT(DSITX1_DSITX1_0, 0x19a0),
INTCS_VECT(DSITX1_DSITX1_1, 0x19c0),
+ /* MFIS2 */
INTCS_VECT(CPORTS2R, 0x1a20),
+ /* CEC */
INTCS_VECT(JPU6E, 0x1a80),
INTC_VECT(INTCS, 0xf80),
MSIOF2_TSYNC_MARK, MSIOF2_TSCK_MARK, MSIOF2_RXD_MARK,
MSIOF2_TXD_MARK,
- /* MSIOF3 */
+ /* BBIF1 */
BBIF1_RXD_MARK, BBIF1_TSYNC_MARK, BBIF1_TSCK_MARK,
BBIF1_TXD_MARK, BBIF1_RSCK_MARK, BBIF1_RSYNC_MARK,
BBIF1_FLOW_MARK, BB_RX_FLOW_N_MARK,
- /* MSIOF4 */
+ /* BBIF2 */
BBIF2_TSCK1_MARK, BBIF2_TSYNC1_MARK,
BBIF2_TXD1_MARK, BBIF2_RXD_MARK,
GPIO_FN(MSIOF2_TSYNC), GPIO_FN(MSIOF2_TSCK), GPIO_FN(MSIOF2_RXD),
GPIO_FN(MSIOF2_TXD),
- /* MSIOF3 */
+ /* BBIF1 */
GPIO_FN(BBIF1_RXD), GPIO_FN(BBIF1_TSYNC), GPIO_FN(BBIF1_TSCK),
GPIO_FN(BBIF1_TXD), GPIO_FN(BBIF1_RSCK), GPIO_FN(BBIF1_RSYNC),
GPIO_FN(BBIF1_FLOW), GPIO_FN(BB_RX_FLOW_N),
- /* MSIOF4 */
+ /* BBIF2 */
GPIO_FN(BBIF2_TSCK1), GPIO_FN(BBIF2_TSYNC1),
GPIO_FN(BBIF2_TXD1), GPIO_FN(BBIF2_RXD),
.name = "CMT10",
.channel_offset = 0x10,
.timer_bit = 0,
- .clk = "r_clk",
.clockevent_rating = 125,
.clocksource_rating = 125,
};
.name = "CMT10",
.channel_offset = 0x10,
.timer_bit = 0,
- .clk = "cmt1",
.clockevent_rating = 125,
.clocksource_rating = 125,
};
.num_resources = ARRAY_SIZE(cmt10_resources),
};
+/* TMU */
+static struct sh_timer_config tmu00_platform_data = {
+ .name = "TMU00",
+ .channel_offset = 0x4,
+ .timer_bit = 0,
+ .clockevent_rating = 200,
+};
+
+static struct resource tmu00_resources[] = {
+ [0] = {
+ .name = "TMU00",
+ .start = 0xfff60008,
+ .end = 0xfff60013,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = intcs_evt2irq(0xe80), /* TMU_TUNI0 */
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device tmu00_device = {
+ .name = "sh_tmu",
+ .id = 0,
+ .dev = {
+ .platform_data = &tmu00_platform_data,
+ },
+ .resource = tmu00_resources,
+ .num_resources = ARRAY_SIZE(tmu00_resources),
+};
+
+static struct sh_timer_config tmu01_platform_data = {
+ .name = "TMU01",
+ .channel_offset = 0x10,
+ .timer_bit = 1,
+ .clocksource_rating = 200,
+};
+
+static struct resource tmu01_resources[] = {
+ [0] = {
+ .name = "TMU01",
+ .start = 0xfff60014,
+ .end = 0xfff6001f,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = intcs_evt2irq(0xea0), /* TMU_TUNI1 */
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device tmu01_device = {
+ .name = "sh_tmu",
+ .id = 1,
+ .dev = {
+ .platform_data = &tmu01_platform_data,
+ },
+ .resource = tmu01_resources,
+ .num_resources = ARRAY_SIZE(tmu01_resources),
+};
+
/* I2C */
static struct resource iic0_resources[] = {
[0] = {
},
{
/* DMA error IRQ */
- .start = 246,
- .end = 246,
+ .start = evt2irq(0x20c0),
+ .end = evt2irq(0x20c0),
.flags = IORESOURCE_IRQ,
},
{
/* IRQ for channels 0-5 */
- .start = 240,
- .end = 245,
+ .start = evt2irq(0x2000),
+ .end = evt2irq(0x20a0),
.flags = IORESOURCE_IRQ,
},
};
},
{
/* DMA error IRQ */
- .start = 254,
- .end = 254,
+ .start = evt2irq(0x21c0),
+ .end = evt2irq(0x21c0),
.flags = IORESOURCE_IRQ,
},
{
/* IRQ for channels 0-5 */
- .start = 248,
- .end = 253,
+ .start = evt2irq(0x2100),
+ .end = evt2irq(0x21a0),
.flags = IORESOURCE_IRQ,
},
};
},
{
/* DMA error IRQ */
- .start = 262,
- .end = 262,
+ .start = evt2irq(0x22c0),
+ .end = evt2irq(0x22c0),
.flags = IORESOURCE_IRQ,
},
{
/* IRQ for channels 0-5 */
- .start = 256,
- .end = 261,
+ .start = evt2irq(0x2200),
+ .end = evt2irq(0x22a0),
.flags = IORESOURCE_IRQ,
},
};
&scif5_device,
&scif6_device,
&cmt10_device,
+ &tmu00_device,
+ &tmu01_device,
+};
+
+static struct platform_device *sh7372_late_devices[] __initdata = {
&iic0_device,
&iic1_device,
&dma0_device,
{
platform_add_devices(sh7372_early_devices,
ARRAY_SIZE(sh7372_early_devices));
+
+ platform_add_devices(sh7372_late_devices,
+ ARRAY_SIZE(sh7372_late_devices));
}
void __init sh7372_add_early_devices(void)
.name = "CMT10",
.channel_offset = 0x10,
.timer_bit = 0,
- .clk = "r_clk",
.clockevent_rating = 125,
.clocksource_rating = 125,
};
#include <linux/io.h>
#include <linux/clk.h>
+#include <asm/cacheflush.h>
#include <asm/hardware/cache-l2x0.h>
#include <asm/hardware/gic.h>
#include <asm/mach/map.h>
}
#ifdef CONFIG_CACHE_L2X0
+static inline void ux500_cache_wait(void __iomem *reg, unsigned long mask)
+{
+ /* wait for the operation to complete */
+ while (readl(reg) & mask)
+ ;
+}
+
+static inline void ux500_cache_sync(void)
+{
+ void __iomem *base = __io_address(UX500_L2CC_BASE);
+ writel(0, base + L2X0_CACHE_SYNC);
+ ux500_cache_wait(base + L2X0_CACHE_SYNC, 1);
+}
+
+/*
+ * The L2 cache cannot be turned off in the non-secure world.
+ * Dummy until a secure service is in place.
+ */
+static void ux500_l2x0_disable(void)
+{
+}
+
+/*
+ * This is only called when doing a kexec, just after turning off the L2
+ * and L1 cache, and it is surrounded by a spinlock in the generic version.
+ * However, we're not really turning off the L2 cache right now and the
+ * PL310 does not support exclusive accesses (used to implement the spinlock).
+ * So, the invalidation needs to be done without the spinlock.
+ */
+static void ux500_l2x0_inv_all(void)
+{
+ void __iomem *l2x0_base = __io_address(UX500_L2CC_BASE);
+ uint32_t l2x0_way_mask = (1<<16) - 1; /* Bitmask of active ways */
+
+ /* invalidate all ways */
+ writel(l2x0_way_mask, l2x0_base + L2X0_INV_WAY);
+ ux500_cache_wait(l2x0_base + L2X0_INV_WAY, l2x0_way_mask);
+ ux500_cache_sync();
+}
+
static int ux500_l2x0_init(void)
{
void __iomem *l2x0_base;
/* 64KB way size, 8 way associativity, force WA */
l2x0_init(l2x0_base, 0x3e060000, 0xc0000fff);
+ /* Override invalidate function */
+ outer_cache.disable = ux500_l2x0_disable;
+ outer_cache.inv_all = ux500_l2x0_inv_all;
+
return 0;
}
early_initcall(ux500_l2x0_init);
help
This option enables the L2x0 PrimeCell.
+config CACHE_PL310
+ bool
+ depends on CACHE_L2X0
+ default y if CPU_V7 && !CPU_V6
+ help
+ This option enables optimisations for the PL310 cache
+ controller.
+
config CACHE_TAUROS2
bool "Enable the Tauros2 L2 cache controller"
depends on (ARCH_DOVE || ARCH_MMP)
/* FIXME: put optimal value here. Current one is just estimation */
#define CACHE_DLIMIT (CACHE_DSIZE * 2)
+/*
+ * flush_icache_all()
+ *
+ * Unconditionally clean and invalidate the entire icache.
+ */
+ENTRY(fa_flush_icache_all)
+ mov r0, #0
+ mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache
+ mov pc, lr
+ENDPROC(fa_flush_icache_all)
+
/*
* flush_user_cache_all()
*
.type fa_cache_fns, #object
ENTRY(fa_cache_fns)
+ .long fa_flush_icache_all
.long fa_flush_kern_cache_all
.long fa_flush_user_cache_all
.long fa_flush_user_cache_range
static void __iomem *l2x0_base;
static DEFINE_SPINLOCK(l2x0_lock);
static uint32_t l2x0_way_mask; /* Bitmask of active ways */
+static uint32_t l2x0_size;
-static inline void cache_wait(void __iomem *reg, unsigned long mask)
+static inline void cache_wait_way(void __iomem *reg, unsigned long mask)
{
- /* wait for the operation to complete */
+ /* wait for cache operation by line or way to complete */
while (readl_relaxed(reg) & mask)
;
}
+#ifdef CONFIG_CACHE_PL310
+static inline void cache_wait(void __iomem *reg, unsigned long mask)
+{
+ /* cache operations by line are atomic on PL310 */
+}
+#else
+#define cache_wait cache_wait_way
+#endif
+
static inline void cache_sync(void)
{
void __iomem *base = l2x0_base;
spin_unlock_irqrestore(&l2x0_lock, flags);
}
-static inline void l2x0_inv_all(void)
+static void l2x0_flush_all(void)
+{
+ unsigned long flags;
+
+ /* clean all ways */
+ spin_lock_irqsave(&l2x0_lock, flags);
+ writel_relaxed(l2x0_way_mask, l2x0_base + L2X0_CLEAN_INV_WAY);
+ cache_wait_way(l2x0_base + L2X0_CLEAN_INV_WAY, l2x0_way_mask);
+ cache_sync();
+ spin_unlock_irqrestore(&l2x0_lock, flags);
+}
+
+static void l2x0_clean_all(void)
+{
+ unsigned long flags;
+
+ /* clean all ways */
+ spin_lock_irqsave(&l2x0_lock, flags);
+ writel_relaxed(l2x0_way_mask, l2x0_base + L2X0_CLEAN_WAY);
+ cache_wait_way(l2x0_base + L2X0_CLEAN_WAY, l2x0_way_mask);
+ cache_sync();
+ spin_unlock_irqrestore(&l2x0_lock, flags);
+}
+
+static void l2x0_inv_all(void)
{
unsigned long flags;
/* invalidate all ways */
spin_lock_irqsave(&l2x0_lock, flags);
+ /* Invalidating when L2 is enabled is a nono */
+ BUG_ON(readl(l2x0_base + L2X0_CTRL) & 1);
writel_relaxed(l2x0_way_mask, l2x0_base + L2X0_INV_WAY);
- cache_wait(l2x0_base + L2X0_INV_WAY, l2x0_way_mask);
+ cache_wait_way(l2x0_base + L2X0_INV_WAY, l2x0_way_mask);
cache_sync();
spin_unlock_irqrestore(&l2x0_lock, flags);
}
void __iomem *base = l2x0_base;
unsigned long flags;
+ if ((end - start) >= l2x0_size) {
+ l2x0_clean_all();
+ return;
+ }
+
spin_lock_irqsave(&l2x0_lock, flags);
start &= ~(CACHE_LINE_SIZE - 1);
while (start < end) {
void __iomem *base = l2x0_base;
unsigned long flags;
+ if ((end - start) >= l2x0_size) {
+ l2x0_flush_all();
+ return;
+ }
+
spin_lock_irqsave(&l2x0_lock, flags);
start &= ~(CACHE_LINE_SIZE - 1);
while (start < end) {
spin_unlock_irqrestore(&l2x0_lock, flags);
}
+static void l2x0_disable(void)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&l2x0_lock, flags);
+ writel(0, l2x0_base + L2X0_CTRL);
+ spin_unlock_irqrestore(&l2x0_lock, flags);
+}
+
void __init l2x0_init(void __iomem *base, __u32 aux_val, __u32 aux_mask)
{
__u32 aux;
__u32 cache_id;
+ __u32 way_size = 0;
int ways;
const char *type;
l2x0_way_mask = (1 << ways) - 1;
+ /*
+ * L2 cache Size = Way size * Number of ways
+ */
+ way_size = (aux & L2X0_AUX_CTRL_WAY_SIZE_MASK) >> 17;
+ way_size = 1 << (way_size + 3);
+ l2x0_size = ways * way_size * SZ_1K;
+
/*
* Check if l2x0 controller is already enabled.
* If you are booting from non-secure mode
outer_cache.clean_range = l2x0_clean_range;
outer_cache.flush_range = l2x0_flush_range;
outer_cache.sync = l2x0_cache_sync;
+ outer_cache.flush_all = l2x0_flush_all;
+ outer_cache.inv_all = l2x0_inv_all;
+ outer_cache.disable = l2x0_disable;
printk(KERN_INFO "%s cache controller enabled\n", type);
- printk(KERN_INFO "l2x0: %d ways, CACHE_ID 0x%08x, AUX_CTRL 0x%08x\n",
- ways, cache_id, aux);
+ printk(KERN_INFO "l2x0: %d ways, CACHE_ID 0x%08x, AUX_CTRL 0x%08x, Cache size: %d B\n",
+ ways, cache_id, aux, l2x0_size);
}
#include <asm/page.h>
#include "proc-macros.S"
+/*
+ * flush_icache_all()
+ *
+ * Unconditionally clean and invalidate the entire icache.
+ */
+ENTRY(v3_flush_icache_all)
+ mov pc, lr
+ENDPROC(v3_flush_icache_all)
+
/*
* flush_user_cache_all()
*
.type v3_cache_fns, #object
ENTRY(v3_cache_fns)
+ .long v3_flush_icache_all
.long v3_flush_kern_cache_all
.long v3_flush_user_cache_all
.long v3_flush_user_cache_range
#include <asm/page.h>
#include "proc-macros.S"
+/*
+ * flush_icache_all()
+ *
+ * Unconditionally clean and invalidate the entire icache.
+ */
+ENTRY(v4_flush_icache_all)
+ mov pc, lr
+ENDPROC(v4_flush_icache_all)
+
/*
* flush_user_cache_all()
*
.type v4_cache_fns, #object
ENTRY(v4_cache_fns)
+ .long v4_flush_icache_all
.long v4_flush_kern_cache_all
.long v4_flush_user_cache_all
.long v4_flush_user_cache_range
.long FLUSH_BASE
.text
+/*
+ * flush_icache_all()
+ *
+ * Unconditionally clean and invalidate the entire icache.
+ */
+ENTRY(v4wb_flush_icache_all)
+ mov r0, #0
+ mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache
+ mov pc, lr
+ENDPROC(v4wb_flush_icache_all)
+
/*
* flush_user_cache_all()
*
.type v4wb_cache_fns, #object
ENTRY(v4wb_cache_fns)
+ .long v4wb_flush_icache_all
.long v4wb_flush_kern_cache_all
.long v4wb_flush_user_cache_all
.long v4wb_flush_user_cache_range
*/
#define CACHE_DLIMIT 16384
+/*
+ * flush_icache_all()
+ *
+ * Unconditionally clean and invalidate the entire icache.
+ */
+ENTRY(v4wt_flush_icache_all)
+ mov r0, #0
+ mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache
+ mov pc, lr
+ENDPROC(v4wt_flush_icache_all)
+
/*
* flush_user_cache_all()
*
.type v4wt_cache_fns, #object
ENTRY(v4wt_cache_fns)
+ .long v4wt_flush_icache_all
.long v4wt_flush_kern_cache_all
.long v4wt_flush_user_cache_all
.long v4wt_flush_user_cache_range
return ret;
}
+#if USE_SPLIT_PTLOCKS
+/*
+ * If we are using split PTE locks, then we need to take the page
+ * lock here. Otherwise we are using shared mm->page_table_lock
+ * which is already locked, thus cannot take it.
+ */
+static inline void do_pte_lock(spinlock_t *ptl)
+{
+ /*
+ * Use nested version here to indicate that we are already
+ * holding one similar spinlock.
+ */
+ spin_lock_nested(ptl, SINGLE_DEPTH_NESTING);
+}
+
+static inline void do_pte_unlock(spinlock_t *ptl)
+{
+ spin_unlock(ptl);
+}
+#else /* !USE_SPLIT_PTLOCKS */
+static inline void do_pte_lock(spinlock_t *ptl) {}
+static inline void do_pte_unlock(spinlock_t *ptl) {}
+#endif /* USE_SPLIT_PTLOCKS */
+
static int adjust_pte(struct vm_area_struct *vma, unsigned long address,
unsigned long pfn)
{
*/
ptl = pte_lockptr(vma->vm_mm, pmd);
pte = pte_offset_map(pmd, address);
- spin_lock(ptl);
+ do_pte_lock(ptl);
ret = do_adjust_pte(vma, address, pfn, pte);
- spin_unlock(ptl);
+ do_pte_unlock(ptl);
pte_unmap(pte);
return ret;
#include <linux/highmem.h>
#include <linux/gfp.h>
#include <linux/memblock.h>
+#include <linux/sort.h>
#include <asm/mach-types.h>
#include <asm/sections.h>
printk("%d pages swap cached\n", cached);
}
-static void __init find_limits(struct meminfo *mi,
- unsigned long *min, unsigned long *max_low, unsigned long *max_high)
+static void __init find_limits(unsigned long *min, unsigned long *max_low,
+ unsigned long *max_high)
{
+ struct meminfo *mi = &meminfo;
int i;
*min = -1UL;
}
}
-static void __init arm_bootmem_init(struct meminfo *mi,
- unsigned long start_pfn, unsigned long end_pfn)
+static void __init arm_bootmem_init(unsigned long start_pfn,
+ unsigned long end_pfn)
{
struct memblock_region *reg;
unsigned int boot_pages;
phys_addr_t bitmap;
pg_data_t *pgdat;
- int i;
/*
* Allocate the bootmem bitmap page. This must be in a region
pgdat = NODE_DATA(0);
init_bootmem_node(pgdat, __phys_to_pfn(bitmap), start_pfn, end_pfn);
- for_each_bank(i, mi) {
- struct membank *bank = &mi->bank[i];
- if (!bank->highmem)
- free_bootmem(bank_phys_start(bank), bank_phys_size(bank));
+ /* Free the lowmem regions from memblock into bootmem. */
+ for_each_memblock(memory, reg) {
+ unsigned long start = memblock_region_memory_base_pfn(reg);
+ unsigned long end = memblock_region_memory_end_pfn(reg);
+
+ if (end >= end_pfn)
+ end = end_pfn;
+ if (start >= end)
+ break;
+
+ free_bootmem(__pfn_to_phys(start), (end - start) << PAGE_SHIFT);
}
- /*
- * Reserve the memblock reserved regions in bootmem.
- */
+ /* Reserve the lowmem memblock reserved regions in bootmem. */
for_each_memblock(reserved, reg) {
- phys_addr_t start = memblock_region_reserved_base_pfn(reg);
- phys_addr_t end = memblock_region_reserved_end_pfn(reg);
- if (start >= start_pfn && end <= end_pfn)
- reserve_bootmem_node(pgdat, __pfn_to_phys(start),
- (end - start) << PAGE_SHIFT,
- BOOTMEM_DEFAULT);
+ unsigned long start = memblock_region_reserved_base_pfn(reg);
+ unsigned long end = memblock_region_reserved_end_pfn(reg);
+
+ if (end >= end_pfn)
+ end = end_pfn;
+ if (start >= end)
+ break;
+
+ reserve_bootmem(__pfn_to_phys(start),
+ (end - start) << PAGE_SHIFT, BOOTMEM_DEFAULT);
}
}
-static void __init arm_bootmem_free(struct meminfo *mi, unsigned long min,
- unsigned long max_low, unsigned long max_high)
+static void __init arm_bootmem_free(unsigned long min, unsigned long max_low,
+ unsigned long max_high)
{
unsigned long zone_size[MAX_NR_ZONES], zhole_size[MAX_NR_ZONES];
- int i;
+ struct memblock_region *reg;
/*
* initialise the zones.
* holes = node_size - sum(bank_sizes)
*/
memcpy(zhole_size, zone_size, sizeof(zhole_size));
- for_each_bank(i, mi) {
- int idx = 0;
+ for_each_memblock(memory, reg) {
+ unsigned long start = memblock_region_memory_base_pfn(reg);
+ unsigned long end = memblock_region_memory_end_pfn(reg);
+
+ if (start < max_low) {
+ unsigned long low_end = min(end, max_low);
+ zhole_size[0] -= low_end - start;
+ }
#ifdef CONFIG_HIGHMEM
- if (mi->bank[i].highmem)
- idx = ZONE_HIGHMEM;
+ if (end > max_low) {
+ unsigned long high_start = max(start, max_low);
+ zhole_size[ZONE_HIGHMEM] -= end - high_start;
+ }
#endif
- zhole_size[idx] -= bank_pfn_size(&mi->bank[i]);
}
/*
}
#endif
+static int __init meminfo_cmp(const void *_a, const void *_b)
+{
+ const struct membank *a = _a, *b = _b;
+ long cmp = bank_pfn_start(a) - bank_pfn_start(b);
+ return cmp < 0 ? -1 : cmp > 0 ? 1 : 0;
+}
+
void __init arm_memblock_init(struct meminfo *mi, struct machine_desc *mdesc)
{
int i;
+ sort(&meminfo.bank, meminfo.nr_banks, sizeof(meminfo.bank[0]), meminfo_cmp, NULL);
+
memblock_init();
for (i = 0; i < mi->nr_banks; i++)
memblock_add(mi->bank[i].start, mi->bank[i].size);
void __init bootmem_init(void)
{
- struct meminfo *mi = &meminfo;
unsigned long min, max_low, max_high;
max_low = max_high = 0;
- find_limits(mi, &min, &max_low, &max_high);
+ find_limits(&min, &max_low, &max_high);
- arm_bootmem_init(mi, min, max_low);
+ arm_bootmem_init(min, max_low);
/*
* Sparsemem tries to allocate bootmem in memory_present(),
* the sparse mem_map arrays initialized by sparse_init()
* for memmap_init_zone(), otherwise all PFNs are invalid.
*/
- arm_bootmem_free(mi, min, max_low, max_high);
+ arm_bootmem_free(min, max_low, max_high);
high_memory = __va((max_low << PAGE_SHIFT) - 1) + 1;
}
}
+static void __init free_highpages(void)
+{
+#ifdef CONFIG_HIGHMEM
+ unsigned long max_low = max_low_pfn + PHYS_PFN_OFFSET;
+ struct memblock_region *mem, *res;
+
+ /* set highmem page free */
+ for_each_memblock(memory, mem) {
+ unsigned long start = memblock_region_memory_base_pfn(mem);
+ unsigned long end = memblock_region_memory_end_pfn(mem);
+
+ /* Ignore complete lowmem entries */
+ if (end <= max_low)
+ continue;
+
+ /* Truncate partial highmem entries */
+ if (start < max_low)
+ start = max_low;
+
+ /* Find and exclude any reserved regions */
+ for_each_memblock(reserved, res) {
+ unsigned long res_start, res_end;
+
+ res_start = memblock_region_reserved_base_pfn(res);
+ res_end = memblock_region_reserved_end_pfn(res);
+
+ if (res_end < start)
+ continue;
+ if (res_start < start)
+ res_start = start;
+ if (res_start > end)
+ res_start = end;
+ if (res_end > end)
+ res_end = end;
+ if (res_start != start)
+ totalhigh_pages += free_area(start, res_start,
+ NULL);
+ start = res_end;
+ if (start == end)
+ break;
+ }
+
+ /* And now free anything which remains */
+ if (start < end)
+ totalhigh_pages += free_area(start, end, NULL);
+ }
+ totalram_pages += totalhigh_pages;
+#endif
+}
+
/*
* mem_init() marks the free areas in the mem_map and tells us how much
* memory is free. This is done after various parts of the system have
void __init mem_init(void)
{
unsigned long reserved_pages, free_pages;
+ struct memblock_region *reg;
int i;
#ifdef CONFIG_HAVE_TCM
/* These pointers are filled in on TCM detection */
__phys_to_pfn(__pa(swapper_pg_dir)), NULL);
#endif
-#ifdef CONFIG_HIGHMEM
- /* set highmem page free */
- for_each_bank (i, &meminfo) {
- unsigned long start = bank_pfn_start(&meminfo.bank[i]);
- unsigned long end = bank_pfn_end(&meminfo.bank[i]);
- if (start >= max_low_pfn + PHYS_PFN_OFFSET)
- totalhigh_pages += free_area(start, end, NULL);
- }
- totalram_pages += totalhigh_pages;
-#endif
+ free_highpages();
reserved_pages = free_pages = 0;
*/
printk(KERN_INFO "Memory:");
num_physpages = 0;
- for (i = 0; i < meminfo.nr_banks; i++) {
- num_physpages += bank_pfn_size(&meminfo.bank[i]);
- printk(" %ldMB", bank_phys_size(&meminfo.bank[i]) >> 20);
+ for_each_memblock(memory, reg) {
+ unsigned long pages = memblock_region_memory_end_pfn(reg) -
+ memblock_region_memory_base_pfn(reg);
+ num_physpages += pages;
+ printk(" %ldMB", pages >> (20 - PAGE_SHIFT));
}
printk(" = %luMB total\n", num_physpages >> (20 - PAGE_SHIFT));
#include <linux/mman.h>
#include <linux/nodemask.h>
#include <linux/memblock.h>
-#include <linux/sort.h>
#include <linux/fs.h>
#include <asm/cputype.h>
.domain = DOMAIN_KERNEL,
},
[MT_MEMORY_DTCM] = {
- .prot_pte = L_PTE_PRESENT | L_PTE_YOUNG |
- L_PTE_DIRTY | L_PTE_WRITE,
- .prot_l1 = PMD_TYPE_TABLE,
- .prot_sect = PMD_TYPE_SECT | PMD_SECT_XN,
- .domain = DOMAIN_KERNEL,
+ .prot_pte = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY |
+ L_PTE_WRITE,
+ .prot_l1 = PMD_TYPE_TABLE,
+ .prot_sect = PMD_TYPE_SECT | PMD_SECT_XN,
+ .domain = DOMAIN_KERNEL,
},
[MT_MEMORY_ITCM] = {
.prot_pte = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY |
- L_PTE_USER | L_PTE_EXEC,
+ L_PTE_WRITE | L_PTE_EXEC,
.prot_l1 = PMD_TYPE_TABLE,
- .domain = DOMAIN_IO,
+ .domain = DOMAIN_KERNEL,
},
};
}
early_param("vmalloc", early_vmalloc);
-phys_addr_t lowmem_end_addr;
+static phys_addr_t lowmem_limit __initdata = 0;
static void __init sanity_check_meminfo(void)
{
int i, j, highmem = 0;
- lowmem_end_addr = __pa(vmalloc_min - 1) + 1;
+ lowmem_limit = __pa(vmalloc_min - 1) + 1;
+ memblock_set_current_limit(lowmem_limit);
for (i = 0, j = 0; i < meminfo.nr_banks; i++) {
struct membank *bank = &meminfo.bank[j];
static inline void prepare_page_table(void)
{
unsigned long addr;
+ phys_addr_t end;
/*
* Clear out all the mappings below the kernel image.
for ( ; addr < PAGE_OFFSET; addr += PGDIR_SIZE)
pmd_clear(pmd_off_k(addr));
+ /*
+ * Find the end of the first block of lowmem.
+ */
+ end = memblock.memory.regions[0].base + memblock.memory.regions[0].size;
+ if (end >= lowmem_limit)
+ end = lowmem_limit;
+
/*
* Clear out all the kernel space mappings, except for the first
* memory bank, up to the end of the vmalloc region.
*/
- for (addr = __phys_to_virt(bank_phys_end(&meminfo.bank[0]));
+ for (addr = __phys_to_virt(end);
addr < VMALLOC_END; addr += PGDIR_SIZE)
pmd_clear(pmd_off_k(addr));
}
#endif
}
-static inline void map_memory_bank(struct membank *bank)
-{
- struct map_desc map;
-
- map.pfn = bank_pfn_start(bank);
- map.virtual = __phys_to_virt(bank_phys_start(bank));
- map.length = bank_phys_size(bank);
- map.type = MT_MEMORY;
-
- create_mapping(&map);
-}
-
static void __init map_lowmem(void)
{
- struct meminfo *mi = &meminfo;
- int i;
+ struct memblock_region *reg;
/* Map all the lowmem memory banks. */
- for (i = 0; i < mi->nr_banks; i++) {
- struct membank *bank = &mi->bank[i];
+ for_each_memblock(memory, reg) {
+ phys_addr_t start = reg->base;
+ phys_addr_t end = start + reg->size;
+ struct map_desc map;
+
+ if (end > lowmem_limit)
+ end = lowmem_limit;
+ if (start >= end)
+ break;
- if (!bank->highmem)
- map_memory_bank(bank);
- }
-}
+ map.pfn = __phys_to_pfn(start);
+ map.virtual = __phys_to_virt(start);
+ map.length = end - start;
+ map.type = MT_MEMORY;
-static int __init meminfo_cmp(const void *_a, const void *_b)
-{
- const struct membank *a = _a, *b = _b;
- long cmp = bank_pfn_start(a) - bank_pfn_start(b);
- return cmp < 0 ? -1 : cmp > 0 ? 1 : 0;
+ create_mapping(&map);
+ }
}
/*
{
void *zero_page;
- sort(&meminfo.bank, meminfo.nr_banks, sizeof(meminfo.bank[0]), meminfo_cmp, NULL);
-
build_mem_type_table();
sanity_check_meminfo();
prepare_page_table();
/* ================================= CACHE ================================ */
.align 5
+
+/*
+ * flush_icache_all()
+ *
+ * Unconditionally clean and invalidate the entire icache.
+ */
+ENTRY(arm1020_flush_icache_all)
+#ifndef CONFIG_CPU_ICACHE_DISABLE
+ mov r0, #0
+ mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache
+#endif
+ mov pc, lr
+ENDPROC(arm1020_flush_icache_all)
+
/*
* flush_user_cache_all()
*
ENDPROC(arm1020_dma_unmap_area)
ENTRY(arm1020_cache_fns)
+ .long arm1020_flush_icache_all
.long arm1020_flush_kern_cache_all
.long arm1020_flush_user_cache_all
.long arm1020_flush_user_cache_range
/* ================================= CACHE ================================ */
.align 5
+
+/*
+ * flush_icache_all()
+ *
+ * Unconditionally clean and invalidate the entire icache.
+ */
+ENTRY(arm1020e_flush_icache_all)
+#ifndef CONFIG_CPU_ICACHE_DISABLE
+ mov r0, #0
+ mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache
+#endif
+ mov pc, lr
+ENDPROC(arm1020e_flush_icache_all)
+
/*
* flush_user_cache_all()
*
ENDPROC(arm1020e_dma_unmap_area)
ENTRY(arm1020e_cache_fns)
+ .long arm1020e_flush_icache_all
.long arm1020e_flush_kern_cache_all
.long arm1020e_flush_user_cache_all
.long arm1020e_flush_user_cache_range
/* ================================= CACHE ================================ */
.align 5
+
+/*
+ * flush_icache_all()
+ *
+ * Unconditionally clean and invalidate the entire icache.
+ */
+ENTRY(arm1022_flush_icache_all)
+#ifndef CONFIG_CPU_ICACHE_DISABLE
+ mov r0, #0
+ mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache
+#endif
+ mov pc, lr
+ENDPROC(arm1022_flush_icache_all)
+
/*
* flush_user_cache_all()
*
ENDPROC(arm1022_dma_unmap_area)
ENTRY(arm1022_cache_fns)
+ .long arm1022_flush_icache_all
.long arm1022_flush_kern_cache_all
.long arm1022_flush_user_cache_all
.long arm1022_flush_user_cache_range
/* ================================= CACHE ================================ */
.align 5
+
+/*
+ * flush_icache_all()
+ *
+ * Unconditionally clean and invalidate the entire icache.
+ */
+ENTRY(arm1026_flush_icache_all)
+#ifndef CONFIG_CPU_ICACHE_DISABLE
+ mov r0, #0
+ mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache
+#endif
+ mov pc, lr
+ENDPROC(arm1026_flush_icache_all)
+
/*
* flush_user_cache_all()
*
ENDPROC(arm1026_dma_unmap_area)
ENTRY(arm1026_cache_fns)
+ .long arm1026_flush_icache_all
.long arm1026_flush_kern_cache_all
.long arm1026_flush_user_cache_all
.long arm1026_flush_user_cache_range
#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
+/*
+ * flush_icache_all()
+ *
+ * Unconditionally clean and invalidate the entire icache.
+ */
+ENTRY(arm920_flush_icache_all)
+ mov r0, #0
+ mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache
+ mov pc, lr
+ENDPROC(arm920_flush_icache_all)
+
/*
* flush_user_cache_all()
*
ENDPROC(arm920_dma_unmap_area)
ENTRY(arm920_cache_fns)
+ .long arm920_flush_icache_all
.long arm920_flush_kern_cache_all
.long arm920_flush_user_cache_all
.long arm920_flush_user_cache_range
#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
+/*
+ * flush_icache_all()
+ *
+ * Unconditionally clean and invalidate the entire icache.
+ */
+ENTRY(arm922_flush_icache_all)
+ mov r0, #0
+ mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache
+ mov pc, lr
+ENDPROC(arm922_flush_icache_all)
+
/*
* flush_user_cache_all()
*
ENDPROC(arm922_dma_unmap_area)
ENTRY(arm922_cache_fns)
+ .long arm922_flush_icache_all
.long arm922_flush_kern_cache_all
.long arm922_flush_user_cache_all
.long arm922_flush_user_cache_range
mcr p15, 0, r1, c1, c0, 0 @ Restore ICache enable
mov pc, lr
+/*
+ * flush_icache_all()
+ *
+ * Unconditionally clean and invalidate the entire icache.
+ */
+ENTRY(arm925_flush_icache_all)
+ mov r0, #0
+ mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache
+ mov pc, lr
+ENDPROC(arm925_flush_icache_all)
+
/*
* flush_user_cache_all()
*
ENDPROC(arm925_dma_unmap_area)
ENTRY(arm925_cache_fns)
+ .long arm925_flush_icache_all
.long arm925_flush_kern_cache_all
.long arm925_flush_user_cache_all
.long arm925_flush_user_cache_range
msr cpsr_c, r3 @ Restore FIQ state
mov pc, lr
+/*
+ * flush_icache_all()
+ *
+ * Unconditionally clean and invalidate the entire icache.
+ */
+ENTRY(arm926_flush_icache_all)
+ mov r0, #0
+ mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache
+ mov pc, lr
+ENDPROC(arm926_flush_icache_all)
+
/*
* flush_user_cache_all()
*
ENDPROC(arm926_dma_unmap_area)
ENTRY(arm926_cache_fns)
+ .long arm926_flush_icache_all
.long arm926_flush_kern_cache_all
.long arm926_flush_user_cache_all
.long arm926_flush_user_cache_range
mcr p15, 0, r0, c7, c0, 4 @ Wait for interrupt
mov pc, lr
+/*
+ * flush_icache_all()
+ *
+ * Unconditionally clean and invalidate the entire icache.
+ */
+ENTRY(arm940_flush_icache_all)
+ mov r0, #0
+ mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache
+ mov pc, lr
+ENDPROC(arm940_flush_icache_all)
+
/*
* flush_user_cache_all()
*/
ENDPROC(arm940_dma_unmap_area)
ENTRY(arm940_cache_fns)
+ .long arm940_flush_icache_all
.long arm940_flush_kern_cache_all
.long arm940_flush_user_cache_all
.long arm940_flush_user_cache_range
mcr p15, 0, r0, c7, c0, 4 @ Wait for interrupt
mov pc, lr
+/*
+ * flush_icache_all()
+ *
+ * Unconditionally clean and invalidate the entire icache.
+ */
+ENTRY(arm946_flush_icache_all)
+ mov r0, #0
+ mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache
+ mov pc, lr
+ENDPROC(arm946_flush_icache_all)
+
/*
* flush_user_cache_all()
*/
ENDPROC(arm946_dma_unmap_area)
ENTRY(arm946_cache_fns)
+ .long arm946_flush_icache_all
.long arm946_flush_kern_cache_all
.long arm946_flush_user_cache_all
.long arm946_flush_user_cache_range
mcr p15, 0, r0, c7, c0, 4 @ Wait for interrupt
mov pc, lr
+/*
+ * flush_icache_all()
+ *
+ * Unconditionally clean and invalidate the entire icache.
+ */
+ENTRY(feroceon_flush_icache_all)
+ mov r0, #0
+ mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache
+ mov pc, lr
+ENDPROC(feroceon_flush_icache_all)
+
/*
* flush_user_cache_all()
*
ENDPROC(feroceon_dma_unmap_area)
ENTRY(feroceon_cache_fns)
+ .long feroceon_flush_icache_all
.long feroceon_flush_kern_cache_all
.long feroceon_flush_user_cache_all
.long feroceon_flush_user_cache_range
.long feroceon_dma_flush_range
ENTRY(feroceon_range_cache_fns)
+ .long feroceon_flush_icache_all
.long feroceon_flush_kern_cache_all
.long feroceon_flush_user_cache_all
.long feroceon_flush_user_cache_range
/* ================================= CACHE ================================ */
+/*
+ * flush_icache_all()
+ *
+ * Unconditionally clean and invalidate the entire icache.
+ */
+ENTRY(xsc3_flush_icache_all)
+ mov r0, #0
+ mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache
+ mov pc, lr
+ENDPROC(xsc3_flush_icache_all)
+
/*
* flush_user_cache_all()
*
ENDPROC(xsc3_dma_unmap_area)
ENTRY(xsc3_cache_fns)
+ .long xsc3_flush_icache_all
.long xsc3_flush_kern_cache_all
.long xsc3_flush_user_cache_all
.long xsc3_flush_user_cache_range
/* ================================= CACHE ================================ */
+/*
+ * flush_icache_all()
+ *
+ * Unconditionally clean and invalidate the entire icache.
+ */
+ENTRY(xscale_flush_icache_all)
+ mov r0, #0
+ mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache
+ mov pc, lr
+ENDPROC(xscale_flush_icache_all)
+
/*
* flush_user_cache_all()
*
ENDPROC(xscale_dma_unmap_area)
ENTRY(xscale_cache_fns)
+ .long xscale_flush_icache_all
.long xscale_flush_kern_cache_all
.long xscale_flush_user_cache_all
.long xscale_flush_user_cache_range
obj-$(CONFIG_ARCH_MXC_AUDMUX_V1) += audmux-v1.o
obj-$(CONFIG_ARCH_MXC_AUDMUX_V2) += audmux-v2.o
obj-$(CONFIG_MXC_DEBUG_BOARD) += 3ds_debugboard.o
+obj-$(CONFIG_CPU_FREQ_IMX) += cpufreq.o
ifdef CONFIG_SND_IMX_SOC
obj-y += ssi-fiq.o
obj-y += ssi-fiq-ksym.o
--- /dev/null
+/*
+ * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/*
+ * A driver for the Freescale Semiconductor i.MXC CPUfreq module.
+ * The CPUFREQ driver is for controling CPU frequency. It allows you to change
+ * the CPU clock speed on the fly.
+ */
+
+#include <linux/cpufreq.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+#include <mach/hardware.h>
+#include <mach/clock.h>
+
+#define CLK32_FREQ 32768
+#define NANOSECOND (1000 * 1000 * 1000)
+
+struct cpu_op *(*get_cpu_op)(int *op);
+
+static int cpu_freq_khz_min;
+static int cpu_freq_khz_max;
+
+static struct clk *cpu_clk;
+static struct cpufreq_frequency_table *imx_freq_table;
+
+static int cpu_op_nr;
+static struct cpu_op *cpu_op_tbl;
+
+static int set_cpu_freq(int freq)
+{
+ int ret = 0;
+ int org_cpu_rate;
+
+ org_cpu_rate = clk_get_rate(cpu_clk);
+ if (org_cpu_rate == freq)
+ return ret;
+
+ ret = clk_set_rate(cpu_clk, freq);
+ if (ret != 0) {
+ printk(KERN_DEBUG "cannot set CPU clock rate\n");
+ return ret;
+ }
+
+ return ret;
+}
+
+static int mxc_verify_speed(struct cpufreq_policy *policy)
+{
+ if (policy->cpu != 0)
+ return -EINVAL;
+
+ return cpufreq_frequency_table_verify(policy, imx_freq_table);
+}
+
+static unsigned int mxc_get_speed(unsigned int cpu)
+{
+ if (cpu)
+ return 0;
+
+ return clk_get_rate(cpu_clk) / 1000;
+}
+
+static int mxc_set_target(struct cpufreq_policy *policy,
+ unsigned int target_freq, unsigned int relation)
+{
+ struct cpufreq_freqs freqs;
+ int freq_Hz;
+ int ret = 0;
+ unsigned int index;
+
+ cpufreq_frequency_table_target(policy, imx_freq_table,
+ target_freq, relation, &index);
+ freq_Hz = imx_freq_table[index].frequency * 1000;
+
+ freqs.old = clk_get_rate(cpu_clk) / 1000;
+ freqs.new = freq_Hz / 1000;
+ freqs.cpu = 0;
+ freqs.flags = 0;
+ cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+
+ ret = set_cpu_freq(freq_Hz);
+
+ cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+
+ return ret;
+}
+
+static int __init mxc_cpufreq_init(struct cpufreq_policy *policy)
+{
+ int ret;
+ int i;
+
+ printk(KERN_INFO "i.MXC CPU frequency driver\n");
+
+ if (policy->cpu != 0)
+ return -EINVAL;
+
+ if (!get_cpu_op)
+ return -EINVAL;
+
+ cpu_clk = clk_get(NULL, "cpu_clk");
+ if (IS_ERR(cpu_clk)) {
+ printk(KERN_ERR "%s: failed to get cpu clock\n", __func__);
+ return PTR_ERR(cpu_clk);
+ }
+
+ cpu_op_tbl = get_cpu_op(&cpu_op_nr);
+
+ cpu_freq_khz_min = cpu_op_tbl[0].cpu_rate / 1000;
+ cpu_freq_khz_max = cpu_op_tbl[0].cpu_rate / 1000;
+
+ imx_freq_table = kmalloc(
+ sizeof(struct cpufreq_frequency_table) * (cpu_op_nr + 1),
+ GFP_KERNEL);
+ if (!imx_freq_table) {
+ ret = -ENOMEM;
+ goto err1;
+ }
+
+ for (i = 0; i < cpu_op_nr; i++) {
+ imx_freq_table[i].index = i;
+ imx_freq_table[i].frequency = cpu_op_tbl[i].cpu_rate / 1000;
+
+ if ((cpu_op_tbl[i].cpu_rate / 1000) < cpu_freq_khz_min)
+ cpu_freq_khz_min = cpu_op_tbl[i].cpu_rate / 1000;
+
+ if ((cpu_op_tbl[i].cpu_rate / 1000) > cpu_freq_khz_max)
+ cpu_freq_khz_max = cpu_op_tbl[i].cpu_rate / 1000;
+ }
+
+ imx_freq_table[i].index = i;
+ imx_freq_table[i].frequency = CPUFREQ_TABLE_END;
+
+ policy->cur = clk_get_rate(cpu_clk) / 1000;
+ policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
+ policy->min = policy->cpuinfo.min_freq = cpu_freq_khz_min;
+ policy->max = policy->cpuinfo.max_freq = cpu_freq_khz_max;
+
+ /* Manual states, that PLL stabilizes in two CLK32 periods */
+ policy->cpuinfo.transition_latency = 2 * NANOSECOND / CLK32_FREQ;
+
+ ret = cpufreq_frequency_table_cpuinfo(policy, imx_freq_table);
+
+ if (ret < 0) {
+ printk(KERN_ERR "%s: failed to register i.MXC CPUfreq \
+ with error code %d\n", __func__, ret);
+ goto err;
+ }
+
+ cpufreq_frequency_table_get_attr(imx_freq_table, policy->cpu);
+ return 0;
+err:
+ kfree(imx_freq_table);
+err1:
+ clk_put(cpu_clk);
+ return ret;
+}
+
+static int mxc_cpufreq_exit(struct cpufreq_policy *policy)
+{
+ cpufreq_frequency_table_put_attr(policy->cpu);
+
+ set_cpu_freq(cpu_freq_khz_max * 1000);
+ clk_put(cpu_clk);
+ kfree(imx_freq_table);
+ return 0;
+}
+
+static struct cpufreq_driver mxc_driver = {
+ .flags = CPUFREQ_STICKY,
+ .verify = mxc_verify_speed,
+ .target = mxc_set_target,
+ .get = mxc_get_speed,
+ .init = mxc_cpufreq_init,
+ .exit = mxc_cpufreq_exit,
+ .name = "imx",
+};
+
+static int __devinit mxc_cpufreq_driver_init(void)
+{
+ return cpufreq_register_driver(&mxc_driver);
+}
+
+static void mxc_cpufreq_driver_exit(void)
+{
+ cpufreq_unregister_driver(&mxc_driver);
+}
+
+module_init(mxc_cpufreq_driver_init);
+module_exit(mxc_cpufreq_driver_exit);
+
+MODULE_AUTHOR("Freescale Semiconductor Inc. Yong Shen <yong.shen@linaro.org>");
+MODULE_DESCRIPTION("CPUfreq driver for i.MX");
+MODULE_LICENSE("GPL");
default y if ARCH_MX25 || SOC_IMX27 || ARCH_MX35 || ARCH_MX51
config IMX_HAVE_PLATFORM_FLEXCAN
- select HAVE_CAN_FLEXCAN
+ select HAVE_CAN_FLEXCAN if CAN
bool
+config IMX_HAVE_PLATFORM_GPIO_KEYS
+ bool
+ default y if ARCH_MX51
+
config IMX_HAVE_PLATFORM_IMX_I2C
bool
obj-$(CONFIG_IMX_HAVE_PLATFORM_ESDHC) += platform-esdhc.o
obj-$(CONFIG_IMX_HAVE_PLATFORM_FEC) += platform-fec.o
obj-$(CONFIG_IMX_HAVE_PLATFORM_FLEXCAN) += platform-flexcan.o
+obj-$(CONFIG_IMX_HAVE_PLATFORM_GPIO_KEYS) += platform-gpio_keys.o
obj-y += platform-imx-dma.o
obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_I2C) += platform-imx-i2c.o
obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_SSI) += platform-imx-ssi.o
--- /dev/null
+/*
+ * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ * Boston, MA 02110-1301, USA.
+ */
+#include <asm/sizes.h>
+#include <mach/hardware.h>
+#include <mach/devices-common.h>
+
+struct platform_device *__init imx_add_gpio_keys(
+ const struct gpio_keys_platform_data *pdata)
+{
+ return imx_add_platform_device("gpio-keys", -1, NULL,
+ 0, pdata, sizeof(*pdata));
+}
*/
#include <linux/init.h>
+#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/irq.h>
#include <linux/gpio.h>
}
}
+/*
+ * Set interrupt number "irq" in the GPIO as a wake-up source.
+ * While system is running, all registered GPIO interrupts need to have
+ * wake-up enabled. When system is suspended, only selected GPIO interrupts
+ * need to have wake-up enabled.
+ * @param irq interrupt source number
+ * @param enable enable as wake-up if equal to non-zero
+ * @return This function returns 0 on success.
+ */
+static int gpio_set_wake_irq(u32 irq, u32 enable)
+{
+ u32 gpio = irq_to_gpio(irq);
+ u32 gpio_idx = gpio & 0x1F;
+ struct mxc_gpio_port *port = &mxc_gpio_ports[gpio / 32];
+
+ if (enable) {
+ if (port->irq_high && (gpio_idx >= 16))
+ enable_irq_wake(port->irq_high);
+ else
+ enable_irq_wake(port->irq);
+ } else {
+ if (port->irq_high && (gpio_idx >= 16))
+ disable_irq_wake(port->irq_high);
+ else
+ disable_irq_wake(port->irq);
+ }
+
+ return 0;
+}
+
static struct irq_chip gpio_irq_chip = {
.ack = gpio_ack_irq,
.mask = gpio_mask_irq,
.unmask = gpio_unmask_irq,
.set_type = gpio_set_irq_type,
+ .set_wake = gpio_set_wake_irq,
};
static void _set_gpio_direction(struct gpio_chip *chip, unsigned offset,
resource_size_t irq,
const struct flexcan_platform_data *pdata);
+#include <linux/gpio_keys.h>
+struct platform_device *__init imx_add_gpio_keys(
+ const struct gpio_keys_platform_data *pdata);
+
#include <mach/i2c.h>
struct imx_imx_i2c_data {
int id;
PAD_CTL_PKE | PAD_CTL_HYS)
#define MX51_GPIO_PAD_CTRL (PAD_CTL_DSE_HIGH | PAD_CTL_PKE | \
PAD_CTL_SRE_FAST)
+#define MX51_GPIO_PAD_CTRL_2 (PAD_CTL_SRE_FAST | PAD_CTL_DSE_HIGH | \
+ PAD_CTL_PUS_100K_UP)
#define MX51_ECSPI_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_PKE | PAD_CTL_DSE_HIGH | \
PAD_CTL_SRE_FAST)
#define MX51_SDHCI_PAD_CTRL (PAD_CTL_DSE_HIGH | PAD_CTL_PUS_47K_UP | \
#define MPEG4_ENC_BASE_ADDR MX31_MPEG4_ENC_BASE_ADDR
#define MXC_INT_MPEG4_ENCODER MX31_INT_MPEG4_ENCODER
#define MXC_INT_FIRI MX31_INT_FIRI
-#define MXC_INT_MMC_SDHC1 MX31_INT_MMC_SDHC1
#define MXC_INT_MBX MX31_INT_MBX
#define MXC_INT_CSPI3 MX31_INT_CSPI3
#define MXC_INT_SIM2 MX31_INT_SIM2
/* these should go away */
#define MXC_FEC_BASE_ADDR MX35_FEC_BASE_ADDR
#define MXC_INT_OWIRE MX35_INT_OWIRE
-#define MXC_INT_MMC_SDHC2 MX35_INT_MMC_SDHC2
-#define MXC_INT_MMC_SDHC3 MX35_INT_MMC_SDHC3
#define MXC_INT_GPU2D MX35_INT_GPU2D
#define MXC_INT_ASRC MX35_INT_ASRC
#define MXC_INT_USBHS MX35_INT_USBHS
/*
- * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2004-2007, 2010 Freescale Semiconductor, Inc. All Rights Reserved.
* Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
*
* This program is free software; you can redistribute it and/or
#ifndef __ASM_ARCH_MXC_H__
#define __ASM_ARCH_MXC_H__
+#include <linux/types.h>
+
#ifndef __ASM_ARCH_MXC_HARDWARE_H__
#error "Do not include directly."
#endif
# define cpu_is_mxc91231() (0)
#endif
+#ifndef __ASSEMBLY__
+
+struct cpu_op {
+ u32 cpu_rate;
+};
+
+extern struct cpu_op *(*get_cpu_op)(int *op);
+#endif
+
#if defined(CONFIG_ARCH_MX3) || defined(CONFIG_ARCH_MX2)
/* These are deprecated, use mx[23][157]_setup_weimcs instead. */
#define CSCR_U(n) (IO_ADDRESS(WEIM_BASE_ADDR + n * 0x10))
[7] = {
.name = "S3C2410 flash partition 7",
.offset = SZ_1M * 48,
- .size = SZ_16M,
+ .size = MTDPART_SIZ_FULL,
}
};
return -EINVAL;
}
-static int s3c24xx_gpiolib_bankg_toirq(struct gpio_chip *chip, unsigned offset)
-{
- return IRQ_EINT8 + offset;
-}
-
static struct s3c_gpio_cfg s3c24xx_gpiocfg_banka = {
.set_config = s3c_gpio_setcfg_s3c24xx_a,
.get_config = s3c_gpio_getcfg_s3c24xx_a,
[6] = {
.base = S3C2410_GPGCON,
.pm = __gpio_pm(&s3c_gpio_pm_2bit),
+ .irq_base = IRQ_EINT8,
.chip = {
.base = S3C2410_GPG(0),
.owner = THIS_MODULE,
.label = "GPIOG",
.ngpio = 16,
- .to_irq = s3c24xx_gpiolib_bankg_toirq,
+ .to_irq = samsung_gpiolib_to_irq,
},
}, {
.base = S3C2410_GPHCON,
Use the external interrupts (other than GPIO interrupts.)
Note: Do not choose this for S5P6440 and S5P6450.
+config S5P_GPIO_INT
+ bool
+ help
+ Common code for the GPIO interrupts (other than external interrupts.)
+
config S5P_DEV_FIMC0
bool
help
obj-y += clock.o
obj-y += irq.o
obj-$(CONFIG_S5P_EXT_INT) += irq-eint.o
+obj-$(CONFIG_S5P_GPIO_INT) += irq-gpioint.o
+obj-$(CONFIG_PM) += pm.o
+obj-$(CONFIG_PM) += irq-pm.o
# devices
#include <linux/io.h>
#include <asm/div64.h>
+#include <mach/regs-clock.h>
+
#include <plat/clock.h>
#include <plat/clock-clksrc.h>
#include <plat/s5p-clock.h>
.ctrlbit = (1 << 31),
};
-/* ARM clock */
-struct clk clk_arm = {
- .name = "armclk",
- .id = -1,
- .rate = 0,
- .ctrlbit = 0,
-};
-
/* Possible clock sources for APLL Mux */
static struct clk *clk_src_apll_list[] = {
[0] = &clk_fin_apll,
return 0;
}
+int s5p_epll_enable(struct clk *clk, int enable)
+{
+ unsigned int ctrlbit = clk->ctrlbit;
+ unsigned int epll_con = __raw_readl(S5P_EPLL_CON) & ~ctrlbit;
+
+ if (enable)
+ __raw_writel(epll_con | ctrlbit, S5P_EPLL_CON);
+ else
+ __raw_writel(epll_con, S5P_EPLL_CON);
+
+ return 0;
+}
+
+unsigned long s5p_epll_get_rate(struct clk *clk)
+{
+ return clk->rate;
+}
+
static struct clk *s5p_clks[] __initdata = {
&clk_ext_xtal_mux,
&clk_48m,
&clk_fout_epll,
&clk_fout_dpll,
&clk_fout_vpll,
- &clk_arm,
&clk_vpll,
&clk_xusbxti,
};
((irq) - S5P_EINT_BASE1) : \
((irq) + 16 - S5P_EINT_BASE2))
+#define IRQ_EINT_BIT(x) EINT_OFFSET(x)
+
+/* Typically only a few gpio chips require gpio interrupt support.
+ To avoid memory waste irq descriptors are allocated only for
+ S5P_GPIOINT_GROUP_COUNT chips, each with total number of
+ S5P_GPIOINT_GROUP_SIZE pins/irqs. Each GPIOINT group can be assiged
+ to any gpio chip with the s5p_register_gpio_interrupt() function */
+#define S5P_GPIOINT_GROUP_COUNT 4
+#define S5P_GPIOINT_GROUP_SIZE 8
+#define S5P_GPIOINT_COUNT (S5P_GPIOINT_GROUP_COUNT * S5P_GPIOINT_GROUP_SIZE)
+
+/* IRQ types common for all s5p platforms */
+#define S5P_IRQ_TYPE_LEVEL_LOW (0x00)
+#define S5P_IRQ_TYPE_LEVEL_HIGH (0x01)
+#define S5P_IRQ_TYPE_EDGE_FALLING (0x02)
+#define S5P_IRQ_TYPE_EDGE_RISING (0x03)
+#define S5P_IRQ_TYPE_EDGE_BOTH (0x04)
+
#endif /* __ASM_PLAT_S5P_IRQS_H */
#ifndef __ASM_PLAT_MAP_S5P_H
#define __ASM_PLAT_MAP_S5P_H __FILE__
-#define S5P_VA_CHIPID S3C_ADDR(0x00700000)
-#define S5P_VA_GPIO S3C_ADDR(0x00500000)
-#define S5P_VA_SYSTIMER S3C_ADDR(0x01200000)
-#define S5P_VA_SROMC S3C_ADDR(0x01100000)
-#define S5P_VA_SYSRAM S3C_ADDR(0x01180000)
-
-#define S5P_VA_COMBINER_BASE S3C_ADDR(0x00600000)
+#define S5P_VA_CHIPID S3C_ADDR(0x02000000)
+#define S5P_VA_CMU S3C_ADDR(0x02100000)
+#define S5P_VA_GPIO S3C_ADDR(0x02200000)
+#define S5P_VA_GPIO1 S5P_VA_GPIO
+#define S5P_VA_GPIO2 S3C_ADDR(0x02240000)
+#define S5P_VA_GPIO3 S3C_ADDR(0x02280000)
+
+#define S5P_VA_SYSRAM S3C_ADDR(0x02400000)
+#define S5P_VA_DMC0 S3C_ADDR(0x02440000)
+#define S5P_VA_DMC1 S3C_ADDR(0x02480000)
+#define S5P_VA_SROMC S3C_ADDR(0x024C0000)
+
+#define S5P_VA_SYSTIMER S3C_ADDR(0x02500000)
+#define S5P_VA_L2CC S3C_ADDR(0x02600000)
+
+#define S5P_VA_COMBINER_BASE S3C_ADDR(0x02700000)
#define S5P_VA_COMBINER(x) (S5P_VA_COMBINER_BASE + ((x) >> 2) * 0x10)
-#define S5P_VA_COREPERI_BASE S3C_ADDR(0x00800000)
+#define S5P_VA_COREPERI_BASE S3C_ADDR(0x02800000)
#define S5P_VA_COREPERI(x) (S5P_VA_COREPERI_BASE + (x))
#define S5P_VA_SCU S5P_VA_COREPERI(0x0)
#define S5P_VA_GIC_CPU S5P_VA_COREPERI(0x100)
#define S5P_VA_TWD S5P_VA_COREPERI(0x600)
#define S5P_VA_GIC_DIST S5P_VA_COREPERI(0x1000)
-#define S5P_VA_L2CC S3C_ADDR(0x00900000)
-#define S5P_VA_CMU S3C_ADDR(0x00920000)
+#define S3C_VA_USB_HSPHY S3C_ADDR(0x02900000)
+
+#define VA_VIC(x) (S3C_VA_IRQ + ((x) * 0x10000))
+#define VA_VIC0 VA_VIC(0)
+#define VA_VIC1 VA_VIC(1)
+#define VA_VIC2 VA_VIC(2)
+#define VA_VIC3 VA_VIC(3)
#define S5P_VA_UART(x) (S3C_VA_UART + ((x) * S3C_UART_OFFSET))
#define S5P_VA_UART0 S5P_VA_UART(0)
#define S3C_UART_OFFSET (0x400)
#endif
-#define VA_VIC(x) (S3C_VA_IRQ + ((x) * 0x10000))
-#define VA_VIC0 VA_VIC(0)
-#define VA_VIC1 VA_VIC(1)
-#define VA_VIC2 VA_VIC(2)
-#define VA_VIC3 VA_VIC(3)
-
#endif /* __ASM_PLAT_MAP_S5P_H */
extern int s5p_gatectrl(void __iomem *reg, struct clk *clk, int enable);
+/* Common EPLL operations for S5P platform */
+extern int s5p_epll_enable(struct clk *clk, int enable);
+extern unsigned long s5p_epll_get_rate(struct clk *clk);
+
#endif /* __ASM_PLAT_S5P_CLOCK_H */
switch (type) {
case IRQ_TYPE_EDGE_RISING:
- newvalue = S5P_EXTINT_RISEEDGE;
+ newvalue = S5P_IRQ_TYPE_EDGE_RISING;
break;
case IRQ_TYPE_EDGE_FALLING:
- newvalue = S5P_EXTINT_FALLEDGE;
+ newvalue = S5P_IRQ_TYPE_EDGE_FALLING;
break;
case IRQ_TYPE_EDGE_BOTH:
- newvalue = S5P_EXTINT_BOTHEDGE;
+ newvalue = S5P_IRQ_TYPE_EDGE_BOTH;
break;
case IRQ_TYPE_LEVEL_LOW:
- newvalue = S5P_EXTINT_LOWLEV;
+ newvalue = S5P_IRQ_TYPE_LEVEL_LOW;
break;
case IRQ_TYPE_LEVEL_HIGH:
- newvalue = S5P_EXTINT_HILEV;
+ newvalue = S5P_IRQ_TYPE_LEVEL_HIGH;
break;
default:
--- /dev/null
+/* linux/arch/arm/plat-s5p/irq-gpioint.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * Author: Kyungmin Park <kyungmin.park@samsung.com>
+ * Author: Joonyoung Shim <jy0922.shim@samsung.com>
+ * Author: Marek Szyprowski <m.szyprowski@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+
+#include <mach/map.h>
+#include <plat/gpio-core.h>
+#include <plat/gpio-cfg.h>
+
+#define S5P_GPIOREG(x) (S5P_VA_GPIO + (x))
+
+#define GPIOINT_CON_OFFSET 0x700
+#define GPIOINT_MASK_OFFSET 0x900
+#define GPIOINT_PEND_OFFSET 0xA00
+
+static struct s3c_gpio_chip *irq_chips[S5P_GPIOINT_GROUP_MAXNR];
+
+static int s5p_gpioint_get_group(unsigned int irq)
+{
+ struct gpio_chip *chip = get_irq_data(irq);
+ struct s3c_gpio_chip *s3c_chip = container_of(chip,
+ struct s3c_gpio_chip, chip);
+ int group;
+
+ for (group = 0; group < S5P_GPIOINT_GROUP_MAXNR; group++)
+ if (s3c_chip == irq_chips[group])
+ break;
+
+ return group;
+}
+
+static int s5p_gpioint_get_offset(unsigned int irq)
+{
+ struct gpio_chip *chip = get_irq_data(irq);
+ struct s3c_gpio_chip *s3c_chip = container_of(chip,
+ struct s3c_gpio_chip, chip);
+
+ return irq - s3c_chip->irq_base;
+}
+
+static void s5p_gpioint_ack(unsigned int irq)
+{
+ int group, offset, pend_offset;
+ unsigned int value;
+
+ group = s5p_gpioint_get_group(irq);
+ offset = s5p_gpioint_get_offset(irq);
+ pend_offset = group << 2;
+
+ value = __raw_readl(S5P_GPIOREG(GPIOINT_PEND_OFFSET) + pend_offset);
+ value |= 1 << offset;
+ __raw_writel(value, S5P_GPIOREG(GPIOINT_PEND_OFFSET) + pend_offset);
+}
+
+static void s5p_gpioint_mask(unsigned int irq)
+{
+ int group, offset, mask_offset;
+ unsigned int value;
+
+ group = s5p_gpioint_get_group(irq);
+ offset = s5p_gpioint_get_offset(irq);
+ mask_offset = group << 2;
+
+ value = __raw_readl(S5P_GPIOREG(GPIOINT_MASK_OFFSET) + mask_offset);
+ value |= 1 << offset;
+ __raw_writel(value, S5P_GPIOREG(GPIOINT_MASK_OFFSET) + mask_offset);
+}
+
+static void s5p_gpioint_unmask(unsigned int irq)
+{
+ int group, offset, mask_offset;
+ unsigned int value;
+
+ group = s5p_gpioint_get_group(irq);
+ offset = s5p_gpioint_get_offset(irq);
+ mask_offset = group << 2;
+
+ value = __raw_readl(S5P_GPIOREG(GPIOINT_MASK_OFFSET) + mask_offset);
+ value &= ~(1 << offset);
+ __raw_writel(value, S5P_GPIOREG(GPIOINT_MASK_OFFSET) + mask_offset);
+}
+
+static void s5p_gpioint_mask_ack(unsigned int irq)
+{
+ s5p_gpioint_mask(irq);
+ s5p_gpioint_ack(irq);
+}
+
+static int s5p_gpioint_set_type(unsigned int irq, unsigned int type)
+{
+ int group, offset, con_offset;
+ unsigned int value;
+
+ group = s5p_gpioint_get_group(irq);
+ offset = s5p_gpioint_get_offset(irq);
+ con_offset = group << 2;
+
+ switch (type) {
+ case IRQ_TYPE_EDGE_RISING:
+ type = S5P_IRQ_TYPE_EDGE_RISING;
+ break;
+ case IRQ_TYPE_EDGE_FALLING:
+ type = S5P_IRQ_TYPE_EDGE_FALLING;
+ break;
+ case IRQ_TYPE_EDGE_BOTH:
+ type = S5P_IRQ_TYPE_EDGE_BOTH;
+ break;
+ case IRQ_TYPE_LEVEL_HIGH:
+ type = S5P_IRQ_TYPE_LEVEL_HIGH;
+ break;
+ case IRQ_TYPE_LEVEL_LOW:
+ type = S5P_IRQ_TYPE_LEVEL_LOW;
+ break;
+ case IRQ_TYPE_NONE:
+ default:
+ printk(KERN_WARNING "No irq type\n");
+ return -EINVAL;
+ }
+
+ value = __raw_readl(S5P_GPIOREG(GPIOINT_CON_OFFSET) + con_offset);
+ value &= ~(0x7 << (offset * 0x4));
+ value |= (type << (offset * 0x4));
+ __raw_writel(value, S5P_GPIOREG(GPIOINT_CON_OFFSET) + con_offset);
+
+ return 0;
+}
+
+struct irq_chip s5p_gpioint = {
+ .name = "s5p_gpioint",
+ .ack = s5p_gpioint_ack,
+ .mask = s5p_gpioint_mask,
+ .mask_ack = s5p_gpioint_mask_ack,
+ .unmask = s5p_gpioint_unmask,
+ .set_type = s5p_gpioint_set_type,
+};
+
+static void s5p_gpioint_handler(unsigned int irq, struct irq_desc *desc)
+{
+ int group, offset, pend_offset, mask_offset;
+ int real_irq;
+ unsigned int pend, mask;
+
+ for (group = 0; group < S5P_GPIOINT_GROUP_MAXNR; group++) {
+ pend_offset = group << 2;
+ pend = __raw_readl(S5P_GPIOREG(GPIOINT_PEND_OFFSET) +
+ pend_offset);
+ if (!pend)
+ continue;
+
+ mask_offset = group << 2;
+ mask = __raw_readl(S5P_GPIOREG(GPIOINT_MASK_OFFSET) +
+ mask_offset);
+ pend &= ~mask;
+
+ for (offset = 0; offset < 8; offset++) {
+ if (pend & (1 << offset)) {
+ struct s3c_gpio_chip *chip = irq_chips[group];
+ if (chip) {
+ real_irq = chip->irq_base + offset;
+ generic_handle_irq(real_irq);
+ }
+ }
+ }
+ }
+}
+
+static __init int s5p_gpioint_add(struct s3c_gpio_chip *chip)
+{
+ static int used_gpioint_groups = 0;
+ static bool handler_registered = 0;
+ int irq, group = chip->group;
+ int i;
+
+ if (used_gpioint_groups >= S5P_GPIOINT_GROUP_COUNT)
+ return -ENOMEM;
+
+ chip->irq_base = S5P_GPIOINT_BASE +
+ used_gpioint_groups * S5P_GPIOINT_GROUP_SIZE;
+ used_gpioint_groups++;
+
+ if (!handler_registered) {
+ set_irq_chained_handler(IRQ_GPIOINT, s5p_gpioint_handler);
+ handler_registered = 1;
+ }
+
+ irq_chips[group] = chip;
+ for (i = 0; i < chip->chip.ngpio; i++) {
+ irq = chip->irq_base + i;
+ set_irq_chip(irq, &s5p_gpioint);
+ set_irq_data(irq, &chip->chip);
+ set_irq_handler(irq, handle_level_irq);
+ set_irq_flags(irq, IRQF_VALID);
+ }
+ return 0;
+}
+
+int __init s5p_register_gpio_interrupt(int pin)
+{
+ struct s3c_gpio_chip *my_chip = s3c_gpiolib_getchip(pin);
+ int offset, group;
+ int ret;
+
+ if (!my_chip)
+ return -EINVAL;
+
+ offset = pin - my_chip->chip.base;
+ group = my_chip->group;
+
+ /* check if the group has been already registered */
+ if (my_chip->irq_base)
+ return my_chip->irq_base + offset;
+
+ /* register gpio group */
+ ret = s5p_gpioint_add(my_chip);
+ if (ret == 0) {
+ my_chip->chip.to_irq = samsung_gpiolib_to_irq;
+ printk(KERN_INFO "Registered interrupt support for gpio group %d.\n",
+ group);
+ return my_chip->irq_base + offset;
+ }
+ return ret;
+}
--- /dev/null
+/* linux/arch/arm/plat-s5p/irq-pm.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * Based on arch/arm/plat-s3c24xx/irq-pm.c,
+ * Copyright (c) 2003,2004 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/sysdev.h>
+
+#include <plat/cpu.h>
+#include <plat/irqs.h>
+#include <plat/pm.h>
+#include <mach/map.h>
+
+#include <mach/regs-gpio.h>
+#include <mach/regs-irq.h>
+
+/* state for IRQs over sleep */
+
+/* default is to allow for EINT0..EINT31, and IRQ_RTC_TIC, IRQ_RTC_ALARM,
+ * as wakeup sources
+ *
+ * set bit to 1 in allow bitfield to enable the wakeup settings on it
+*/
+
+unsigned long s3c_irqwake_intallow = 0x00000006L;
+unsigned long s3c_irqwake_eintallow = 0xffffffffL;
+
+int s3c_irq_wake(unsigned int irqno, unsigned int state)
+{
+ unsigned long irqbit;
+
+ switch (irqno) {
+ case IRQ_RTC_TIC:
+ case IRQ_RTC_ALARM:
+ irqbit = 1 << (irqno + 1 - IRQ_RTC_ALARM);
+ if (!state)
+ s3c_irqwake_intmask |= irqbit;
+ else
+ s3c_irqwake_intmask &= ~irqbit;
+ break;
+ default:
+ return -ENOENT;
+ }
+ return 0;
+}
+
+static struct sleep_save eint_save[] = {
+ SAVE_ITEM(S5P_EINT_CON(0)),
+ SAVE_ITEM(S5P_EINT_CON(1)),
+ SAVE_ITEM(S5P_EINT_CON(2)),
+ SAVE_ITEM(S5P_EINT_CON(3)),
+
+ SAVE_ITEM(S5P_EINT_FLTCON(0)),
+ SAVE_ITEM(S5P_EINT_FLTCON(1)),
+ SAVE_ITEM(S5P_EINT_FLTCON(2)),
+ SAVE_ITEM(S5P_EINT_FLTCON(3)),
+ SAVE_ITEM(S5P_EINT_FLTCON(4)),
+ SAVE_ITEM(S5P_EINT_FLTCON(5)),
+ SAVE_ITEM(S5P_EINT_FLTCON(6)),
+ SAVE_ITEM(S5P_EINT_FLTCON(7)),
+
+ SAVE_ITEM(S5P_EINT_MASK(0)),
+ SAVE_ITEM(S5P_EINT_MASK(1)),
+ SAVE_ITEM(S5P_EINT_MASK(2)),
+ SAVE_ITEM(S5P_EINT_MASK(3)),
+};
+
+int s3c24xx_irq_suspend(struct sys_device *dev, pm_message_t state)
+{
+ s3c_pm_do_save(eint_save, ARRAY_SIZE(eint_save));
+
+ return 0;
+}
+
+int s3c24xx_irq_resume(struct sys_device *dev)
+{
+ s3c_pm_do_restore(eint_save, ARRAY_SIZE(eint_save));
+
+ return 0;
+}
+
--- /dev/null
+/* linux/arch/arm/plat-s5p/pm.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * S5P Power Manager (Suspend-To-RAM) support
+ *
+ * Based on arch/arm/plat-s3c24xx/pm.c
+ * Copyright (c) 2004,2006 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/suspend.h>
+#include <plat/pm.h>
+
+#define PFX "s5p pm: "
+
+/* s3c_pm_check_resume_pin
+ *
+ * check to see if the pin is configured correctly for sleep mode, and
+ * make any necessary adjustments if it is not
+*/
+
+static void s3c_pm_check_resume_pin(unsigned int pin, unsigned int irqoffs)
+{
+ /* nothing here yet */
+}
+
+/* s3c_pm_configure_extint
+ *
+ * configure all external interrupt pins
+*/
+
+void s3c_pm_configure_extint(void)
+{
+ /* nothing here yet */
+}
+
+void s3c_pm_restore_core(void)
+{
+ /* nothing here yet */
+}
+
+void s3c_pm_save_core(void)
+{
+ /* nothing here yet */
+}
+
help
Compile in platform device definitions for I2C channel 2
+config S3C_DEV_I2C3
+ bool
+ help
+ Compile in platform device definition for I2C controller 3
+
+config S3C_DEV_I2C4
+ bool
+ help
+ Compile in platform device definition for I2C controller 4
+
+config S3C_DEV_I2C5
+ bool
+ help
+ Compile in platform device definition for I2C controller 5
+
+config S3C_DEV_I2C6
+ bool
+ help
+ Compile in platform device definition for I2C controller 6
+
+config S3C_DEV_I2C7
+ bool
+ help
+ Compile in platform device definition for I2C controller 7
+
config S3C_DEV_FB
bool
help
obj-y += dev-i2c0.o
obj-$(CONFIG_S3C_DEV_I2C1) += dev-i2c1.o
obj-$(CONFIG_S3C_DEV_I2C2) += dev-i2c2.o
+obj-$(CONFIG_S3C_DEV_I2C3) += dev-i2c3.o
+obj-$(CONFIG_S3C_DEV_I2C4) += dev-i2c4.o
+obj-$(CONFIG_S3C_DEV_I2C5) += dev-i2c5.o
+obj-$(CONFIG_S3C_DEV_I2C6) += dev-i2c6.o
+obj-$(CONFIG_S3C_DEV_I2C7) += dev-i2c7.o
obj-$(CONFIG_S3C_DEV_FB) += dev-fb.o
obj-y += dev-uart.o
obj-$(CONFIG_S3C_DEV_USB_HOST) += dev-usb.o
.max_width = 4,
.host_caps = (MMC_CAP_4_BIT_DATA |
MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED),
+ .clk_type = S3C_SDHCI_CLK_DIV_INTERNAL,
};
struct platform_device s3c_device_hsmmc0 = {
{
struct s3c_sdhci_platdata *set = &s3c_hsmmc0_def_platdata;
- set->max_width = pd->max_width;
set->cd_type = pd->cd_type;
set->ext_cd_init = pd->ext_cd_init;
set->ext_cd_cleanup = pd->ext_cd_cleanup;
set->ext_cd_gpio = pd->ext_cd_gpio;
set->ext_cd_gpio_invert = pd->ext_cd_gpio_invert;
+ if (pd->max_width)
+ set->max_width = pd->max_width;
if (pd->cfg_gpio)
set->cfg_gpio = pd->cfg_gpio;
if (pd->cfg_card)
set->cfg_card = pd->cfg_card;
if (pd->host_caps)
- set->host_caps = pd->host_caps;
+ set->host_caps |= pd->host_caps;
+ if (pd->clk_type)
+ set->clk_type = pd->clk_type;
}
.max_width = 4,
.host_caps = (MMC_CAP_4_BIT_DATA |
MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED),
+ .clk_type = S3C_SDHCI_CLK_DIV_INTERNAL,
};
struct platform_device s3c_device_hsmmc1 = {
{
struct s3c_sdhci_platdata *set = &s3c_hsmmc1_def_platdata;
- set->max_width = pd->max_width;
set->cd_type = pd->cd_type;
set->ext_cd_init = pd->ext_cd_init;
set->ext_cd_cleanup = pd->ext_cd_cleanup;
set->ext_cd_gpio = pd->ext_cd_gpio;
set->ext_cd_gpio_invert = pd->ext_cd_gpio_invert;
+ if (pd->max_width)
+ set->max_width = pd->max_width;
if (pd->cfg_gpio)
set->cfg_gpio = pd->cfg_gpio;
if (pd->cfg_card)
set->cfg_card = pd->cfg_card;
if (pd->host_caps)
- set->host_caps = pd->host_caps;
+ set->host_caps |= pd->host_caps;
+ if (pd->clk_type)
+ set->clk_type = pd->clk_type;
}
.max_width = 4,
.host_caps = (MMC_CAP_4_BIT_DATA |
MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED),
+ .clk_type = S3C_SDHCI_CLK_DIV_INTERNAL,
};
struct platform_device s3c_device_hsmmc2 = {
{
struct s3c_sdhci_platdata *set = &s3c_hsmmc2_def_platdata;
- set->max_width = pd->max_width;
set->cd_type = pd->cd_type;
set->ext_cd_init = pd->ext_cd_init;
set->ext_cd_cleanup = pd->ext_cd_cleanup;
set->ext_cd_gpio = pd->ext_cd_gpio;
set->ext_cd_gpio_invert = pd->ext_cd_gpio_invert;
+ if (pd->max_width)
+ set->max_width = pd->max_width;
if (pd->cfg_gpio)
set->cfg_gpio = pd->cfg_gpio;
if (pd->cfg_card)
set->cfg_card = pd->cfg_card;
if (pd->host_caps)
- set->host_caps = pd->host_caps;
+ set->host_caps |= pd->host_caps;
+ if (pd->clk_type)
+ set->clk_type = pd->clk_type;
}
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = IRQ_MMC3,
- .end = IRQ_MMC3,
+ .start = IRQ_HSMMC3,
+ .end = IRQ_HSMMC3,
.flags = IORESOURCE_IRQ,
}
};
.max_width = 4,
.host_caps = (MMC_CAP_4_BIT_DATA |
MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED),
+ .clk_type = S3C_SDHCI_CLK_DIV_INTERNAL,
};
struct platform_device s3c_device_hsmmc3 = {
{
struct s3c_sdhci_platdata *set = &s3c_hsmmc3_def_platdata;
- set->max_width = pd->max_width;
set->cd_type = pd->cd_type;
set->ext_cd_init = pd->ext_cd_init;
set->ext_cd_cleanup = pd->ext_cd_cleanup;
set->ext_cd_gpio = pd->ext_cd_gpio;
set->ext_cd_gpio_invert = pd->ext_cd_gpio_invert;
+ if (pd->max_width)
+ set->max_width = pd->max_width;
if (pd->cfg_gpio)
set->cfg_gpio = pd->cfg_gpio;
if (pd->cfg_card)
set->cfg_card = pd->cfg_card;
+ if (pd->host_caps)
+ set->host_caps |= pd->host_caps;
+ if (pd->clk_type)
+ set->clk_type = pd->clk_type;
}
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = IRQ_CAN0,
- .end = IRQ_CAN0,
+ .start = IRQ_IIC2,
+ .end = IRQ_IIC2,
.flags = IORESOURCE_IRQ,
},
};
--- /dev/null
+/* linux/arch/arm/plat-samsung/dev-i2c3.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * S5P series device definition for i2c device 3
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/gfp.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/platform_device.h>
+
+#include <mach/irqs.h>
+#include <mach/map.h>
+
+#include <plat/regs-iic.h>
+#include <plat/iic.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+
+static struct resource s3c_i2c_resource[] = {
+ [0] = {
+ .start = S3C_PA_IIC3,
+ .end = S3C_PA_IIC3 + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_IIC3,
+ .end = IRQ_IIC3,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device s3c_device_i2c3 = {
+ .name = "s3c2440-i2c",
+ .id = 3,
+ .num_resources = ARRAY_SIZE(s3c_i2c_resource),
+ .resource = s3c_i2c_resource,
+};
+
+static struct s3c2410_platform_i2c default_i2c_data3 __initdata = {
+ .flags = 0,
+ .bus_num = 3,
+ .slave_addr = 0x10,
+ .frequency = 100*1000,
+ .sda_delay = 100,
+};
+
+void __init s3c_i2c3_set_platdata(struct s3c2410_platform_i2c *pd)
+{
+ struct s3c2410_platform_i2c *npd;
+
+ if (!pd)
+ pd = &default_i2c_data3;
+
+ npd = kmemdup(pd, sizeof(struct s3c2410_platform_i2c), GFP_KERNEL);
+ if (!npd)
+ printk(KERN_ERR "%s: no memory for platform data\n", __func__);
+ else if (!npd->cfg_gpio)
+ npd->cfg_gpio = s3c_i2c3_cfg_gpio;
+
+ s3c_device_i2c3.dev.platform_data = npd;
+}
--- /dev/null
+/* linux/arch/arm/plat-samsung/dev-i2c4.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * S5P series device definition for i2c device 3
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/gfp.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/platform_device.h>
+
+#include <mach/irqs.h>
+#include <mach/map.h>
+
+#include <plat/regs-iic.h>
+#include <plat/iic.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+
+static struct resource s3c_i2c_resource[] = {
+ [0] = {
+ .start = S3C_PA_IIC4,
+ .end = S3C_PA_IIC4 + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_IIC4,
+ .end = IRQ_IIC4,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device s3c_device_i2c4 = {
+ .name = "s3c2440-i2c",
+ .id = 4,
+ .num_resources = ARRAY_SIZE(s3c_i2c_resource),
+ .resource = s3c_i2c_resource,
+};
+
+static struct s3c2410_platform_i2c default_i2c_data4 __initdata = {
+ .flags = 0,
+ .bus_num = 4,
+ .slave_addr = 0x10,
+ .frequency = 100*1000,
+ .sda_delay = 100,
+};
+
+void __init s3c_i2c4_set_platdata(struct s3c2410_platform_i2c *pd)
+{
+ struct s3c2410_platform_i2c *npd;
+
+ if (!pd)
+ pd = &default_i2c_data4;
+
+ npd = kmemdup(pd, sizeof(struct s3c2410_platform_i2c), GFP_KERNEL);
+ if (!npd)
+ printk(KERN_ERR "%s: no memory for platform data\n", __func__);
+ else if (!npd->cfg_gpio)
+ npd->cfg_gpio = s3c_i2c4_cfg_gpio;
+
+ s3c_device_i2c4.dev.platform_data = npd;
+}
--- /dev/null
+/* linux/arch/arm/plat-samsung/dev-i2c3.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * S5P series device definition for i2c device 3
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/gfp.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/platform_device.h>
+
+#include <mach/irqs.h>
+#include <mach/map.h>
+
+#include <plat/regs-iic.h>
+#include <plat/iic.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+
+static struct resource s3c_i2c_resource[] = {
+ [0] = {
+ .start = S3C_PA_IIC5,
+ .end = S3C_PA_IIC5 + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_IIC5,
+ .end = IRQ_IIC5,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device s3c_device_i2c5 = {
+ .name = "s3c2440-i2c",
+ .id = 5,
+ .num_resources = ARRAY_SIZE(s3c_i2c_resource),
+ .resource = s3c_i2c_resource,
+};
+
+static struct s3c2410_platform_i2c default_i2c_data5 __initdata = {
+ .flags = 0,
+ .bus_num = 5,
+ .slave_addr = 0x10,
+ .frequency = 100*1000,
+ .sda_delay = 100,
+};
+
+void __init s3c_i2c5_set_platdata(struct s3c2410_platform_i2c *pd)
+{
+ struct s3c2410_platform_i2c *npd;
+
+ if (!pd)
+ pd = &default_i2c_data5;
+
+ npd = kmemdup(pd, sizeof(struct s3c2410_platform_i2c), GFP_KERNEL);
+ if (!npd)
+ printk(KERN_ERR "%s: no memory for platform data\n", __func__);
+ else if (!npd->cfg_gpio)
+ npd->cfg_gpio = s3c_i2c5_cfg_gpio;
+
+ s3c_device_i2c5.dev.platform_data = npd;
+}
--- /dev/null
+/* linux/arch/arm/plat-samsung/dev-i2c6.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * S5P series device definition for i2c device 6
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/gfp.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/platform_device.h>
+
+#include <mach/irqs.h>
+#include <mach/map.h>
+
+#include <plat/regs-iic.h>
+#include <plat/iic.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+
+static struct resource s3c_i2c_resource[] = {
+ [0] = {
+ .start = S3C_PA_IIC6,
+ .end = S3C_PA_IIC6 + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_IIC6,
+ .end = IRQ_IIC6,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device s3c_device_i2c6 = {
+ .name = "s3c2440-i2c",
+ .id = 6,
+ .num_resources = ARRAY_SIZE(s3c_i2c_resource),
+ .resource = s3c_i2c_resource,
+};
+
+static struct s3c2410_platform_i2c default_i2c_data6 __initdata = {
+ .flags = 0,
+ .bus_num = 6,
+ .slave_addr = 0x10,
+ .frequency = 100*1000,
+ .sda_delay = 100,
+};
+
+void __init s3c_i2c6_set_platdata(struct s3c2410_platform_i2c *pd)
+{
+ struct s3c2410_platform_i2c *npd;
+
+ if (!pd)
+ pd = &default_i2c_data6;
+
+ npd = kmemdup(pd, sizeof(struct s3c2410_platform_i2c), GFP_KERNEL);
+ if (!npd)
+ printk(KERN_ERR "%s: no memory for platform data\n", __func__);
+ else if (!npd->cfg_gpio)
+ npd->cfg_gpio = s3c_i2c6_cfg_gpio;
+
+ s3c_device_i2c6.dev.platform_data = npd;
+}
--- /dev/null
+/* linux/arch/arm/plat-samsung/dev-i2c7.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * S5P series device definition for i2c device 7
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/gfp.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/platform_device.h>
+
+#include <mach/irqs.h>
+#include <mach/map.h>
+
+#include <plat/regs-iic.h>
+#include <plat/iic.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+
+static struct resource s3c_i2c_resource[] = {
+ [0] = {
+ .start = S3C_PA_IIC7,
+ .end = S3C_PA_IIC7 + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_IIC7,
+ .end = IRQ_IIC7,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device s3c_device_i2c7 = {
+ .name = "s3c2440-i2c",
+ .id = 7,
+ .num_resources = ARRAY_SIZE(s3c_i2c_resource),
+ .resource = s3c_i2c_resource,
+};
+
+static struct s3c2410_platform_i2c default_i2c_data7 __initdata = {
+ .flags = 0,
+ .bus_num = 7,
+ .slave_addr = 0x10,
+ .frequency = 100*1000,
+ .sda_delay = 100,
+};
+
+void __init s3c_i2c7_set_platdata(struct s3c2410_platform_i2c *pd)
+{
+ struct s3c2410_platform_i2c *npd;
+
+ if (!pd)
+ pd = &default_i2c_data7;
+
+ npd = kmemdup(pd, sizeof(struct s3c2410_platform_i2c), GFP_KERNEL);
+ if (!npd)
+ printk(KERN_ERR "%s: no memory for platform data\n", __func__);
+ else if (!npd->cfg_gpio)
+ npd->cfg_gpio = s3c_i2c7_cfg_gpio;
+
+ s3c_device_i2c7.dev.platform_data = npd;
+}
}
EXPORT_SYMBOL(s3c_gpio_cfgpin);
+int s3c_gpio_cfgpin_range(unsigned int start, unsigned int nr,
+ unsigned int cfg)
+{
+ int ret;
+
+ for (; nr > 0; nr--, start++) {
+ ret = s3c_gpio_cfgpin(start, cfg);
+ if (ret != 0)
+ return ret;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(s3c_gpio_cfgpin_range);
+
+int s3c_gpio_cfgall_range(unsigned int start, unsigned int nr,
+ unsigned int cfg, s3c_gpio_pull_t pull)
+{
+ int ret;
+
+ for (; nr > 0; nr--, start++) {
+ s3c_gpio_setpull(start, pull);
+ ret = s3c_gpio_cfgpin(start, cfg);
+ if (ret != 0)
+ return ret;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(s3c_gpio_cfgall_range);
+
unsigned s3c_gpio_getcfg(unsigned int pin)
{
struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin);
}
EXPORT_SYMBOL(s3c_gpio_setpull);
+s3c_gpio_pull_t s3c_gpio_getpull(unsigned int pin)
+{
+ struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin);
+ unsigned long flags;
+ int offset;
+ u32 pup = 0;
+
+ if (chip) {
+ offset = pin - chip->chip.base;
+
+ s3c_gpio_lock(chip, flags);
+ pup = s3c_gpio_do_getpull(chip, offset);
+ s3c_gpio_unlock(chip, flags);
+ }
+
+ return (__force s3c_gpio_pull_t)pup;
+}
+EXPORT_SYMBOL(s3c_gpio_getpull);
+
#ifdef CONFIG_S3C_GPIO_CFG_S3C24XX
int s3c_gpio_setcfg_s3c24xx_a(struct s3c_gpio_chip *chip,
unsigned int off, unsigned int cfg)
if (ret >= 0)
s3c_gpiolib_track(chip);
}
+
+int samsung_gpiolib_to_irq(struct gpio_chip *chip, unsigned int offset)
+{
+ struct s3c_gpio_chip *s3c_chip = container_of(chip,
+ struct s3c_gpio_chip, chip);
+
+ return s3c_chip->irq_base + offset;
+}
#define S3C64XX_AC97_GPE 1
extern void s3c64xx_ac97_setup_gpio(int);
+/*
+ * The machine init code calls s5p*_spdif_setup_gpio with
+ * one of these defines in order to select appropriate bank
+ * of GPIO for S/PDIF pins
+ */
+#define S5PC100_SPDIF_GPD 0
+#define S5PC100_SPDIF_GPG3 1
+extern void s5pc100_spdif_setup_gpio(int);
+
/**
* struct s3c_audio_pdata - common platform data for audio device drivers
* @cfg_gpio: Callback function to setup mux'ed pins in I2S/PCM/AC97 mode
extern struct platform_device s3c_device_i2c0;
extern struct platform_device s3c_device_i2c1;
extern struct platform_device s3c_device_i2c2;
+extern struct platform_device s3c_device_i2c3;
+extern struct platform_device s3c_device_i2c4;
+extern struct platform_device s3c_device_i2c5;
+extern struct platform_device s3c_device_i2c6;
+extern struct platform_device s3c_device_i2c7;
extern struct platform_device s3c_device_rtc;
extern struct platform_device s3c_device_adc;
extern struct platform_device s3c_device_sdi;
extern struct platform_device s5pv210_device_iis0;
extern struct platform_device s5pv210_device_iis1;
extern struct platform_device s5pv210_device_iis2;
+extern struct platform_device s5pv210_device_spdif;
extern struct platform_device s5p6442_device_pcm0;
extern struct platform_device s5p6442_device_pcm1;
extern struct platform_device s5pc100_device_iis0;
extern struct platform_device s5pc100_device_iis1;
extern struct platform_device s5pc100_device_iis2;
+extern struct platform_device s5pc100_device_spdif;
extern struct platform_device samsung_device_keypad;
return (chip->config->set_pull)(chip, off, pull);
}
+static inline s3c_gpio_pull_t s3c_gpio_do_getpull(struct s3c_gpio_chip *chip,
+ unsigned int off)
+{
+ return chip->config->get_pull(chip, off);
+}
+
/**
* s3c_gpio_setcfg_s3c24xx - S3C24XX style GPIO configuration.
* @chip: The gpio chip that is being configured.
*/
extern unsigned s3c_gpio_getcfg(unsigned int pin);
+/**
+ * s3c_gpio_cfgpin_range() - Change the GPIO function for configuring pin range
+ * @start: The pin number to start at
+ * @nr: The number of pins to configure from @start.
+ * @cfg: The configuration for the pin's function
+ *
+ * Call s3c_gpio_cfgpin() for the @nr pins starting at @start.
+ *
+ * @sa s3c_gpio_cfgpin.
+ */
+extern int s3c_gpio_cfgpin_range(unsigned int start, unsigned int nr,
+ unsigned int cfg);
+
/* Define values for the pull-{up,down} available for each gpio pin.
*
* These values control the state of the weak pull-{up,down} resistors
*/
extern s3c_gpio_pull_t s3c_gpio_getpull(unsigned int pin);
+/* configure `all` aspects of an gpio */
+
+/**
+ * s3c_gpio_cfgall_range() - configure range of gpio functtion and pull.
+ * @start: The gpio number to start at.
+ * @nr: The number of gpio to configure from @start.
+ * @cfg: The configuration to use
+ * @pull: The pull setting to use.
+ *
+ * Run s3c_gpio_cfgpin() and s3c_gpio_setpull() over the gpio range starting
+ * @gpio and running for @size.
+ *
+ * @sa s3c_gpio_cfgpin
+ * @sa s3c_gpio_setpull
+ * @sa s3c_gpio_cfgpin_range
+ */
+extern int s3c_gpio_cfgall_range(unsigned int start, unsigned int nr,
+ unsigned int cfg, s3c_gpio_pull_t pull);
+
+static inline int s3c_gpio_cfgrange_nopull(unsigned int pin, unsigned int size,
+ unsigned int cfg)
+{
+ return s3c_gpio_cfgall_range(pin, size, cfg, S3C_GPIO_PULL_NONE);
+}
+
/* Define values for the drvstr available for each gpio pin.
*
* These values control the value of the output signal driver strength,
*/
extern int s5p_gpio_set_drvstr(unsigned int pin, s5p_gpio_drvstr_t drvstr);
+/**
+ * s5p_register_gpio_interrupt() - register interrupt support for a gpio group
+ * @pin: The pin number from the group to be registered
+ *
+ * This function registers gpio interrupt support for the group that the
+ * specified pin belongs to.
+ *
+ * The total number of gpio pins is quite large ob s5p series. Registering
+ * irq support for all of them would be a resource waste. Because of that the
+ * interrupt support for standard gpio pins is registered dynamically.
+ *
+ * It will return the irq number of the interrupt that has been registered
+ * or -ENOMEM if no more gpio interrupts can be registered. It is allowed
+ * to call this function more than once for the same gpio group (the group
+ * will be registered only once).
+ */
+extern int s5p_register_gpio_interrupt(int pin);
+
#endif /* __PLAT_GPIO_CFG_H */
* struct s3c_gpio_chip - wrapper for specific implementation of gpio
* @chip: The chip structure to be exported via gpiolib.
* @base: The base pointer to the gpio configuration registers.
+ * @group: The group register number for gpio interrupt support.
+ * @irq_base: The base irq number.
* @config: special function and pull-resistor control information.
* @lock: Lock for exclusive access to this gpio bank.
* @pm_save: Save information for suspend/resume support.
struct s3c_gpio_cfg *config;
struct s3c_gpio_pm *pm;
void __iomem *base;
+ int irq_base;
+ int group;
spinlock_t lock;
#ifdef CONFIG_PM
u32 pm_save[4];
extern void samsung_gpiolib_add_4bit(struct s3c_gpio_chip *chip);
extern void samsung_gpiolib_add_4bit2(struct s3c_gpio_chip *chip);
+
+/**
+ * samsung_gpiolib_to_irq - convert gpio pin to irq number
+ * @chip: The gpio chip that the pin belongs to.
+ * @offset: The offset of the pin in the chip.
+ *
+ * This helper returns the irq number calculated from the chip->irq_base and
+ * the provided offset.
+ */
+extern int samsung_gpiolib_to_irq(struct gpio_chip *chip, unsigned int offset);
+
/* exported for core SoC support to change */
extern struct s3c_gpio_cfg s3c24xx_gpiocfg_default;
extern void s3c_i2c0_set_platdata(struct s3c2410_platform_i2c *i2c);
extern void s3c_i2c1_set_platdata(struct s3c2410_platform_i2c *i2c);
extern void s3c_i2c2_set_platdata(struct s3c2410_platform_i2c *i2c);
+extern void s3c_i2c3_set_platdata(struct s3c2410_platform_i2c *i2c);
+extern void s3c_i2c4_set_platdata(struct s3c2410_platform_i2c *i2c);
+extern void s3c_i2c5_set_platdata(struct s3c2410_platform_i2c *i2c);
+extern void s3c_i2c6_set_platdata(struct s3c2410_platform_i2c *i2c);
+extern void s3c_i2c7_set_platdata(struct s3c2410_platform_i2c *i2c);
/* defined by architecture to configure gpio */
extern void s3c_i2c0_cfg_gpio(struct platform_device *dev);
extern void s3c_i2c1_cfg_gpio(struct platform_device *dev);
extern void s3c_i2c2_cfg_gpio(struct platform_device *dev);
+extern void s3c_i2c3_cfg_gpio(struct platform_device *dev);
+extern void s3c_i2c4_cfg_gpio(struct platform_device *dev);
+extern void s3c_i2c5_cfg_gpio(struct platform_device *dev);
+extern void s3c_i2c6_cfg_gpio(struct platform_device *dev);
+extern void s3c_i2c7_cfg_gpio(struct platform_device *dev);
#endif /* __ASM_ARCH_IIC_H */
#ifndef __ASM_PLAT_MAP_H
#define __ASM_PLAT_MAP_H __FILE__
-/* Fit all our registers in at 0xF4000000 upwards, trying to use as
+/* Fit all our registers in at 0xF6000000 upwards, trying to use as
* little of the VA space as possible so vmalloc and friends have a
* better chance of getting memory.
*
* an single MOVS instruction (ie, only 8 bits of set data)
*/
-#define S3C_ADDR_BASE (0xF4000000)
+#define S3C_ADDR_BASE 0xF6000000
#ifndef __ASSEMBLY__
#define S3C_ADDR(x) ((void __iomem __force *)S3C_ADDR_BASE + (x))
--- /dev/null
+/* arch/arm/plat-samsung/include/plat/nand-core.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * S3C - Nand Controller core functions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_NAND_CORE_H
+#define __ASM_ARCH_NAND_CORE_H __FILE__
+
+/* These functions are only for use with the core support code, such as
+ * the cpu specific initialisation code
+ */
+
+/* re-define device name depending on support. */
+static inline void s3c_nand_setname(char *name)
+{
+#ifdef CONFIG_S3C_DEV_NAND
+ s3c_device_nand.name = name;
+#endif
+}
+
+#endif /* __ASM_ARCH_NAND_CORE_H */
S3C_SDHCI_CD_PERMANENT, /* no CD line, card permanently wired to host */
};
+enum clk_types {
+ S3C_SDHCI_CLK_DIV_INTERNAL, /* use mmc internal clock divider */
+ S3C_SDHCI_CLK_DIV_EXTERNAL, /* use external clock divider */
+};
+
/**
* struct s3c_sdhci_platdata() - Platform device data for Samsung SDHCI
* @max_width: The maximum number of data bits supported.
* @host_caps: Standard MMC host capabilities bit field.
* @cd_type: Type of Card Detection method (see cd_types enum above)
+ * @clk_type: Type of clock divider method (see clk_types enum above)
* @ext_cd_init: Initialize external card detect subsystem. Called on
* sdhci-s3c driver probe when cd_type == S3C_SDHCI_CD_EXTERNAL.
* notify_func argument is a callback to the sdhci-s3c driver
unsigned int max_width;
unsigned int host_caps;
enum cd_types cd_type;
+ enum clk_types clk_type;
char **clocks; /* set of clock sources */
extern void s5pv210_setup_sdhci1_cfg_gpio(struct platform_device *, int w);
extern void s5pv210_setup_sdhci2_cfg_gpio(struct platform_device *, int w);
extern void s5pv210_setup_sdhci3_cfg_gpio(struct platform_device *, int w);
+extern void s5pv310_setup_sdhci0_cfg_gpio(struct platform_device *, int w);
+extern void s5pv310_setup_sdhci1_cfg_gpio(struct platform_device *, int w);
+extern void s5pv310_setup_sdhci2_cfg_gpio(struct platform_device *, int w);
+extern void s5pv310_setup_sdhci3_cfg_gpio(struct platform_device *, int w);
/* S3C64XX SDHCI setup */
#endif /* CONFIG_S5PV210_SETUP_SDHCI */
+/* S5PV310 SDHCI setup */
+#ifdef CONFIG_S5PV310_SETUP_SDHCI
+extern char *s5pv310_hsmmc_clksrcs[4];
+
+extern void s5pv310_setup_sdhci_cfg_card(struct platform_device *dev,
+ void __iomem *r,
+ struct mmc_ios *ios,
+ struct mmc_card *card);
+
+static inline void s5pv310_default_sdhci0(void)
+{
+#ifdef CONFIG_S3C_DEV_HSMMC
+ s3c_hsmmc0_def_platdata.clocks = s5pv310_hsmmc_clksrcs;
+ s3c_hsmmc0_def_platdata.cfg_gpio = s5pv310_setup_sdhci0_cfg_gpio;
+ s3c_hsmmc0_def_platdata.cfg_card = s5pv310_setup_sdhci_cfg_card;
+#endif
+}
+
+static inline void s5pv310_default_sdhci1(void)
+{
+#ifdef CONFIG_S3C_DEV_HSMMC1
+ s3c_hsmmc1_def_platdata.clocks = s5pv310_hsmmc_clksrcs;
+ s3c_hsmmc1_def_platdata.cfg_gpio = s5pv310_setup_sdhci1_cfg_gpio;
+ s3c_hsmmc1_def_platdata.cfg_card = s5pv310_setup_sdhci_cfg_card;
+#endif
+}
+
+static inline void s5pv310_default_sdhci2(void)
+{
+#ifdef CONFIG_S3C_DEV_HSMMC2
+ s3c_hsmmc2_def_platdata.clocks = s5pv310_hsmmc_clksrcs;
+ s3c_hsmmc2_def_platdata.cfg_gpio = s5pv310_setup_sdhci2_cfg_gpio;
+ s3c_hsmmc2_def_platdata.cfg_card = s5pv310_setup_sdhci_cfg_card;
+#endif
+}
+
+static inline void s5pv310_default_sdhci3(void)
+{
+#ifdef CONFIG_S3C_DEV_HSMMC3
+ s3c_hsmmc3_def_platdata.clocks = s5pv310_hsmmc_clksrcs;
+ s3c_hsmmc3_def_platdata.cfg_gpio = s5pv310_setup_sdhci3_cfg_gpio;
+ s3c_hsmmc3_def_platdata.cfg_card = s5pv310_setup_sdhci_cfg_card;
+#endif
+}
+
+#else
+static inline void s5pv310_default_sdhci0(void) { }
+static inline void s5pv310_default_sdhci1(void) { }
+static inline void s5pv310_default_sdhci2(void) { }
+static inline void s5pv310_default_sdhci3(void) { }
+
+#endif /* CONFIG_S5PV310_SETUP_SDHCI */
+
#endif /* __PLAT_S3C_SDHCI_H */
.resume = s3c_gpio_pm_2bit_resume,
};
-#ifdef CONFIG_ARCH_S3C64XX
+#if defined(CONFIG_ARCH_S3C64XX) || defined(CONFIG_PLAT_S5P)
static void s3c_gpio_pm_4bit_save(struct s3c_gpio_chip *chip)
{
chip->pm_save[1] = __raw_readl(chip->base + OFFS_CON);
.save = s3c_gpio_pm_4bit_save,
.resume = s3c_gpio_pm_4bit_resume,
};
-#endif /* CONFIG_ARCH_S3C64XX */
+#endif /* CONFIG_ARCH_S3C64XX || CONFIG_PLAT_S5P */
/**
* s3c_pm_save_gpio() - save gpio chip data for suspend
#include <linux/io.h>
#include <linux/slab.h>
#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/err.h>
#include <asm/hardware/pl330.h>
* @node: To attach to the global list of DMACs.
* @pi: PL330 configuration info for the DMAC.
* @kmcache: Pool to quickly allocate xfers for all channels in the dmac.
+ * @clk: Pointer of DMAC operation clock.
*/
struct s3c_pl330_dmac {
unsigned busy_chan;
struct list_head node;
struct pl330_info *pi;
struct kmem_cache *kmcache;
+ struct clk *clk;
};
/**
if (ret)
goto probe_err4;
- ret = pl330_add(pl330_info);
- if (ret)
- goto probe_err5;
-
/* Allocate a new DMAC */
s3c_pl330_dmac = kmalloc(sizeof(*s3c_pl330_dmac), GFP_KERNEL);
if (!s3c_pl330_dmac) {
ret = -ENOMEM;
+ goto probe_err5;
+ }
+
+ /* Get operation clock and enable it */
+ s3c_pl330_dmac->clk = clk_get(&pdev->dev, "pdma");
+ if (IS_ERR(s3c_pl330_dmac->clk)) {
+ dev_err(&pdev->dev, "Cannot get operation clock.\n");
+ ret = -EINVAL;
goto probe_err6;
}
+ clk_enable(s3c_pl330_dmac->clk);
+
+ ret = pl330_add(pl330_info);
+ if (ret)
+ goto probe_err7;
/* Hook the info */
s3c_pl330_dmac->pi = pl330_info;
if (!s3c_pl330_dmac->kmcache) {
ret = -ENOMEM;
- goto probe_err7;
+ goto probe_err8;
}
/* Get the list of peripherals */
return 0;
+probe_err8:
+ pl330_del(pl330_info);
probe_err7:
- kfree(s3c_pl330_dmac);
+ clk_disable(s3c_pl330_dmac->clk);
+ clk_put(s3c_pl330_dmac->clk);
probe_err6:
- pl330_del(pl330_info);
+ kfree(s3c_pl330_dmac);
probe_err5:
free_irq(irq, pl330_info);
probe_err4:
}
}
+ /* Disable operation clock */
+ clk_disable(dmac->clk);
+ clk_put(dmac->clk);
+
/* Remove the DMAC */
list_del(&dmac->node);
kfree(dmac);
__raw_writew(0, FPGA_LCDREG);
}
+const static struct fb_videomode ap325rxa_lcdc_modes[] = {
+ {
+ .name = "LB070WV1",
+ .xres = 800,
+ .yres = 480,
+ .left_margin = 32,
+ .right_margin = 160,
+ .hsync_len = 8,
+ .upper_margin = 63,
+ .lower_margin = 80,
+ .vsync_len = 1,
+ .sync = 0, /* hsync and vsync are active low */
+ },
+};
+
static struct sh_mobile_lcdc_info lcdc_info = {
.clock_source = LCDC_CLK_EXTERNAL,
.ch[0] = {
.bpp = 16,
.interface_type = RGB18,
.clock_divider = 1,
- .lcd_cfg = {
- .name = "LB070WV1",
- .xres = 800,
- .yres = 480,
- .left_margin = 32,
- .right_margin = 160,
- .hsync_len = 8,
- .upper_margin = 63,
- .lower_margin = 80,
- .vsync_len = 1,
- .sync = 0, /* hsync and vsync are active low */
- },
+ .lcd_cfg = ap325rxa_lcdc_modes,
+ .num_cfg = ARRAY_SIZE(ap325rxa_lcdc_modes),
.lcd_size_cfg = { /* 7.0 inch */
.width = 152,
.height = 91,
};
/* LCDC */
+const static struct fb_videomode ecovec_lcd_modes[] = {
+ {
+ .name = "Panel",
+ .xres = 800,
+ .yres = 480,
+ .left_margin = 220,
+ .right_margin = 110,
+ .hsync_len = 70,
+ .upper_margin = 20,
+ .lower_margin = 5,
+ .vsync_len = 5,
+ .sync = 0, /* hsync and vsync are active low */
+ },
+};
+
+const static struct fb_videomode ecovec_dvi_modes[] = {
+ {
+ .name = "DVI",
+ .xres = 1280,
+ .yres = 720,
+ .left_margin = 220,
+ .right_margin = 110,
+ .hsync_len = 40,
+ .upper_margin = 20,
+ .lower_margin = 5,
+ .vsync_len = 5,
+ .sync = 0, /* hsync and vsync are active low */
+ },
+};
+
static struct sh_mobile_lcdc_info lcdc_info = {
.ch[0] = {
.interface_type = RGB18,
.chan = LCDC_CHAN_MAINLCD,
.bpp = 16,
- .lcd_cfg = {
- .sync = 0, /* hsync and vsync are active low */
- },
.lcd_size_cfg = { /* 7.0 inch */
.width = 152,
.height = 91,
if (gpio_get_value(GPIO_PTE6)) {
/* DVI */
lcdc_info.clock_source = LCDC_CLK_EXTERNAL;
- lcdc_info.ch[0].clock_divider = 1,
- lcdc_info.ch[0].lcd_cfg.name = "DVI";
- lcdc_info.ch[0].lcd_cfg.xres = 1280;
- lcdc_info.ch[0].lcd_cfg.yres = 720;
- lcdc_info.ch[0].lcd_cfg.left_margin = 220;
- lcdc_info.ch[0].lcd_cfg.right_margin = 110;
- lcdc_info.ch[0].lcd_cfg.hsync_len = 40;
- lcdc_info.ch[0].lcd_cfg.upper_margin = 20;
- lcdc_info.ch[0].lcd_cfg.lower_margin = 5;
- lcdc_info.ch[0].lcd_cfg.vsync_len = 5;
+ lcdc_info.ch[0].clock_divider = 1;
+ lcdc_info.ch[0].lcd_cfg = ecovec_dvi_modes;
+ lcdc_info.ch[0].num_cfg = ARRAY_SIZE(ecovec_dvi_modes);
gpio_set_value(GPIO_PTA2, 1);
gpio_set_value(GPIO_PTU1, 1);
} else {
/* Panel */
-
lcdc_info.clock_source = LCDC_CLK_PERIPHERAL;
- lcdc_info.ch[0].clock_divider = 2,
- lcdc_info.ch[0].lcd_cfg.name = "Panel";
- lcdc_info.ch[0].lcd_cfg.xres = 800;
- lcdc_info.ch[0].lcd_cfg.yres = 480;
- lcdc_info.ch[0].lcd_cfg.left_margin = 220;
- lcdc_info.ch[0].lcd_cfg.right_margin = 110;
- lcdc_info.ch[0].lcd_cfg.hsync_len = 70;
- lcdc_info.ch[0].lcd_cfg.upper_margin = 20;
- lcdc_info.ch[0].lcd_cfg.lower_margin = 5;
- lcdc_info.ch[0].lcd_cfg.vsync_len = 5;
+ lcdc_info.ch[0].clock_divider = 2;
+ lcdc_info.ch[0].lcd_cfg = ecovec_lcd_modes;
+ lcdc_info.ch[0].num_cfg = ARRAY_SIZE(ecovec_lcd_modes);
gpio_set_value(GPIO_PTR1, 1);
},
};
+const static struct fb_videomode kfr2r09_lcdc_modes[] = {
+ {
+ .name = "TX07D34VM0AAA",
+ .xres = 240,
+ .yres = 400,
+ .left_margin = 0,
+ .right_margin = 16,
+ .hsync_len = 8,
+ .upper_margin = 0,
+ .lower_margin = 1,
+ .vsync_len = 1,
+ .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+ },
+};
+
static struct sh_mobile_lcdc_info kfr2r09_sh_lcdc_info = {
.clock_source = LCDC_CLK_BUS,
.ch[0] = {
.interface_type = SYS18,
.clock_divider = 6,
.flags = LCDC_FLAGS_DWPOL,
- .lcd_cfg = {
- .name = "TX07D34VM0AAA",
- .xres = 240,
- .yres = 400,
- .left_margin = 0,
- .right_margin = 16,
- .hsync_len = 8,
- .upper_margin = 0,
- .lower_margin = 1,
- .vsync_len = 1,
- .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
- },
+ .lcd_cfg = kfr2r09_lcdc_modes,
+ .num_cfg = ARRAY_SIZE(kfr2r09_lcdc_modes),
.lcd_size_cfg = {
.width = 35,
.height = 58,
}
};
+const static struct fb_videomode migor_lcd_modes[] = {
+ {
+#if defined(CONFIG_SH_MIGOR_RTA_WVGA)
+ .name = "LB070WV1",
+ .xres = 800,
+ .yres = 480,
+ .left_margin = 64,
+ .right_margin = 16,
+ .hsync_len = 120,
+ .sync = 0,
+#elif defined(CONFIG_SH_MIGOR_QVGA)
+ .name = "PH240320T",
+ .xres = 320,
+ .yres = 240,
+ .left_margin = 0,
+ .right_margin = 16,
+ .hsync_len = 8,
+ .sync = FB_SYNC_HOR_HIGH_ACT,
+#endif
+ .upper_margin = 1,
+ .lower_margin = 17,
+ .vsync_len = 2,
+ },
+};
+
static struct sh_mobile_lcdc_info sh_mobile_lcdc_info = {
-#ifdef CONFIG_SH_MIGOR_RTA_WVGA
+#if defined(CONFIG_SH_MIGOR_RTA_WVGA)
.clock_source = LCDC_CLK_BUS,
.ch[0] = {
.chan = LCDC_CHAN_MAINLCD,
.bpp = 16,
.interface_type = RGB16,
.clock_divider = 2,
- .lcd_cfg = {
- .name = "LB070WV1",
- .xres = 800,
- .yres = 480,
- .left_margin = 64,
- .right_margin = 16,
- .hsync_len = 120,
- .upper_margin = 1,
- .lower_margin = 17,
- .vsync_len = 2,
- .sync = 0,
- },
+ .lcd_cfg = migor_lcd_modes,
+ .num_cfg = ARRAY_SIZE(migor_lcd_modes),
.lcd_size_cfg = { /* 7.0 inch */
.width = 152,
.height = 91,
},
}
-#endif
-#ifdef CONFIG_SH_MIGOR_QVGA
+#elif defined(CONFIG_SH_MIGOR_QVGA)
.clock_source = LCDC_CLK_PERIPHERAL,
.ch[0] = {
.chan = LCDC_CHAN_MAINLCD,
.bpp = 16,
.interface_type = SYS16A,
.clock_divider = 10,
- .lcd_cfg = {
- .name = "PH240320T",
- .xres = 320,
- .yres = 240,
- .left_margin = 0,
- .right_margin = 16,
- .hsync_len = 8,
- .upper_margin = 1,
- .lower_margin = 17,
- .vsync_len = 2,
- .sync = FB_SYNC_HOR_HIGH_ACT,
- },
+ .lcd_cfg = migor_lcd_modes,
+ .num_cfg = ARRAY_SIZE(migor_lcd_modes),
.lcd_size_cfg = { /* 2.4 inch */
.width = 49,
.height = 37,
};
/* LCDC */
+const static struct fb_videomode lcdc_720p_modes[] = {
+ {
+ .name = "LB070WV1",
+ .sync = 0, /* hsync and vsync are active low */
+ .xres = 1280,
+ .yres = 720,
+ .left_margin = 220,
+ .right_margin = 110,
+ .hsync_len = 40,
+ .upper_margin = 20,
+ .lower_margin = 5,
+ .vsync_len = 5,
+ },
+};
+
+const static struct fb_videomode lcdc_vga_modes[] = {
+ {
+ .name = "LB070WV1",
+ .sync = 0, /* hsync and vsync are active low */
+ .xres = 640,
+ .yres = 480,
+ .left_margin = 105,
+ .right_margin = 50,
+ .hsync_len = 96,
+ .upper_margin = 33,
+ .lower_margin = 10,
+ .vsync_len = 2,
+ },
+};
+
static struct sh_mobile_lcdc_info lcdc_info = {
.clock_source = LCDC_CLK_EXTERNAL,
.ch[0] = {
.chan = LCDC_CHAN_MAINLCD,
.bpp = 16,
.clock_divider = 1,
- .lcd_cfg = {
- .name = "LB070WV1",
- .sync = 0, /* hsync and vsync are active low */
- },
.lcd_size_cfg = { /* 7.0 inch */
.width = 152,
.height = 91,
if (sw & SW41_B) {
/* 720p */
- lcdc_info.ch[0].lcd_cfg.xres = 1280;
- lcdc_info.ch[0].lcd_cfg.yres = 720;
- lcdc_info.ch[0].lcd_cfg.left_margin = 220;
- lcdc_info.ch[0].lcd_cfg.right_margin = 110;
- lcdc_info.ch[0].lcd_cfg.hsync_len = 40;
- lcdc_info.ch[0].lcd_cfg.upper_margin = 20;
- lcdc_info.ch[0].lcd_cfg.lower_margin = 5;
- lcdc_info.ch[0].lcd_cfg.vsync_len = 5;
+ lcdc_info.ch[0].lcd_cfg = lcdc_720p_modes;
+ lcdc_info.ch[0].num_cfg = ARRAY_SIZE(lcdc_720p_modes);
} else {
/* VGA */
- lcdc_info.ch[0].lcd_cfg.xres = 640;
- lcdc_info.ch[0].lcd_cfg.yres = 480;
- lcdc_info.ch[0].lcd_cfg.left_margin = 105;
- lcdc_info.ch[0].lcd_cfg.right_margin = 50;
- lcdc_info.ch[0].lcd_cfg.hsync_len = 96;
- lcdc_info.ch[0].lcd_cfg.upper_margin = 33;
- lcdc_info.ch[0].lcd_cfg.lower_margin = 10;
- lcdc_info.ch[0].lcd_cfg.vsync_len = 2;
+ lcdc_info.ch[0].lcd_cfg = lcdc_vga_modes;
+ lcdc_info.ch[0].num_cfg = ARRAY_SIZE(lcdc_vga_modes);
}
if (sw & SW41_A) {
u32 linelength;
bool yuv;
- /* Select data format */
+ /*
+ * Select data format. MIPI DSI is not hot-pluggable, so, we just use
+ * the default videomode. If this ever becomes a problem, We'll have to
+ * move this to mipi_display_on() above and use info->var.xres
+ */
switch (pdata->data_format) {
case MIPI_RGB888:
pctype = 0;
datatype = MIPI_DSI_PACKED_PIXEL_STREAM_24;
pixfmt = MIPI_DCS_PIXEL_FMT_24BIT;
- linelength = ch->lcd_cfg.xres * 3;
+ linelength = ch->lcd_cfg[0].xres * 3;
yuv = false;
break;
case MIPI_RGB565:
pctype = 1;
datatype = MIPI_DSI_PACKED_PIXEL_STREAM_16;
pixfmt = MIPI_DCS_PIXEL_FMT_16BIT;
- linelength = ch->lcd_cfg.xres * 2;
+ linelength = ch->lcd_cfg[0].xres * 2;
yuv = false;
break;
case MIPI_RGB666_LP:
pctype = 2;
datatype = MIPI_DSI_PIXEL_STREAM_3BYTE_18;
pixfmt = MIPI_DCS_PIXEL_FMT_24BIT;
- linelength = ch->lcd_cfg.xres * 3;
+ linelength = ch->lcd_cfg[0].xres * 3;
yuv = false;
break;
case MIPI_RGB666:
pctype = 3;
datatype = MIPI_DSI_PACKED_PIXEL_STREAM_18;
pixfmt = MIPI_DCS_PIXEL_FMT_18BIT;
- linelength = (ch->lcd_cfg.xres * 18 + 7) / 8;
+ linelength = (ch->lcd_cfg[0].xres * 18 + 7) / 8;
yuv = false;
break;
case MIPI_BGR888:
pctype = 8;
datatype = MIPI_DSI_PACKED_PIXEL_STREAM_24;
pixfmt = MIPI_DCS_PIXEL_FMT_24BIT;
- linelength = ch->lcd_cfg.xres * 3;
+ linelength = ch->lcd_cfg[0].xres * 3;
yuv = false;
break;
case MIPI_BGR565:
pctype = 9;
datatype = MIPI_DSI_PACKED_PIXEL_STREAM_16;
pixfmt = MIPI_DCS_PIXEL_FMT_16BIT;
- linelength = ch->lcd_cfg.xres * 2;
+ linelength = ch->lcd_cfg[0].xres * 2;
yuv = false;
break;
case MIPI_BGR666_LP:
pctype = 0xa;
datatype = MIPI_DSI_PIXEL_STREAM_3BYTE_18;
pixfmt = MIPI_DCS_PIXEL_FMT_24BIT;
- linelength = ch->lcd_cfg.xres * 3;
+ linelength = ch->lcd_cfg[0].xres * 3;
yuv = false;
break;
case MIPI_BGR666:
pctype = 0xb;
datatype = MIPI_DSI_PACKED_PIXEL_STREAM_18;
pixfmt = MIPI_DCS_PIXEL_FMT_18BIT;
- linelength = (ch->lcd_cfg.xres * 18 + 7) / 8;
+ linelength = (ch->lcd_cfg[0].xres * 18 + 7) / 8;
yuv = false;
break;
case MIPI_YUYV:
pctype = 4;
datatype = MIPI_DSI_PACKED_PIXEL_STREAM_YCBCR16;
pixfmt = MIPI_DCS_PIXEL_FMT_16BIT;
- linelength = ch->lcd_cfg.xres * 2;
+ linelength = ch->lcd_cfg[0].xres * 2;
yuv = true;
break;
case MIPI_UYVY:
pctype = 5;
datatype = MIPI_DSI_PACKED_PIXEL_STREAM_YCBCR16;
pixfmt = MIPI_DCS_PIXEL_FMT_16BIT;
- linelength = ch->lcd_cfg.xres * 2;
+ linelength = ch->lcd_cfg[0].xres * 2;
yuv = true;
break;
case MIPI_YUV420_L:
pctype = 6;
datatype = MIPI_DSI_PACKED_PIXEL_STREAM_YCBCR12;
pixfmt = MIPI_DCS_PIXEL_FMT_12BIT;
- linelength = (ch->lcd_cfg.xres * 12 + 7) / 8;
+ linelength = (ch->lcd_cfg[0].xres * 12 + 7) / 8;
yuv = true;
break;
case MIPI_YUV420:
datatype = MIPI_DSI_PACKED_PIXEL_STREAM_YCBCR12;
pixfmt = MIPI_DCS_PIXEL_FMT_12BIT;
/* Length of U/V line */
- linelength = (ch->lcd_cfg.xres + 1) / 2;
+ linelength = (ch->lcd_cfg[0].xres + 1) / 2;
yuv = true;
break;
default:
iowrite32(0x00e00000, base + 0x8024); /* VMCTR2 */
/*
* 0x660 = 1632 bytes per line (RGB24, 544 pixels: see
- * sh_mobile_lcdc_info.ch[0].lcd_cfg.xres), HSALEN = 1 - default
+ * sh_mobile_lcdc_info.ch[0].lcd_cfg[0].xres), HSALEN = 1 - default
* (unused, since VMCTR2[HSABM] = 0)
*/
iowrite32(1 | (linelength << 16), base + 0x8028); /* VMLEN1 */
#include <video/sh_mobile_hdmi.h>
#include <video/sh_mobile_lcdc.h>
+#include "sh_mobile_lcdcfb.h"
+
#define HDMI_SYSTEM_CTRL 0x00 /* System control */
#define HDMI_L_R_DATA_SWAP_CTRL_RPKT 0x01 /* L/R data swap control,
bits 19..16 of 20-bit N for Audio Clock Regeneration packet */
struct sh_hdmi {
void __iomem *base;
- enum hotplug_state hp_state;
+ enum hotplug_state hp_state; /* hot-plug status */
+ bool preprogrammed_mode; /* use a pre-programmed VIC or the external mode */
struct clk *hdmi_clk;
struct device *dev;
struct fb_info *info;
+ struct mutex mutex; /* Protect the info pointer */
struct delayed_work edid_work;
struct fb_var_screeninfo var;
+ struct fb_monspecs monspec;
};
static void hdmi_write(struct sh_hdmi *hdmi, u8 data, u8 reg)
*/
/* External video parameter settings */
-static void hdmi_external_video_param(struct sh_hdmi *hdmi)
+static void sh_hdmi_external_video_param(struct sh_hdmi *hdmi)
{
struct fb_var_screeninfo *var = &hdmi->var;
u16 htotal, hblank, hdelay, vtotal, vblank, vdelay, voffset;
if (var->sync & FB_SYNC_VERT_HIGH_ACT)
sync |= 8;
- pr_debug("H: %u, %u, %u, %u; V: %u, %u, %u, %u; sync 0x%x\n",
- htotal, hblank, hdelay, var->hsync_len,
- vtotal, vblank, vdelay, var->vsync_len, sync);
+ dev_dbg(hdmi->dev, "H: %u, %u, %u, %u; V: %u, %u, %u, %u; sync 0x%x\n",
+ htotal, hblank, hdelay, var->hsync_len,
+ vtotal, vblank, vdelay, var->vsync_len, sync);
hdmi_write(hdmi, sync | (voffset << 4), HDMI_EXTERNAL_VIDEO_PARAM_SETTINGS);
hdmi_write(hdmi, var->vsync_len, HDMI_EXTERNAL_V_DURATION);
- /* Set bit 0 of HDMI_EXTERNAL_VIDEO_PARAM_SETTINGS here for manual mode */
+ /* Set bit 0 of HDMI_EXTERNAL_VIDEO_PARAM_SETTINGS here for external mode */
+ if (!hdmi->preprogrammed_mode)
+ hdmi_write(hdmi, sync | 1 | (voffset << 4),
+ HDMI_EXTERNAL_VIDEO_PARAM_SETTINGS);
}
/**
}
/**
- * sh_hdmi_phy_config()
+ * sh_hdmi_phy_config() - configure the HDMI PHY for the used video mode
*/
static void sh_hdmi_phy_config(struct sh_hdmi *hdmi)
{
- /* 720p, 8bit, 74.25MHz. Might need to be adjusted for other formats */
- hdmi_write(hdmi, 0x19, HDMI_SLIPHDMIT_PARAM_SETTINGS_1);
- hdmi_write(hdmi, 0x00, HDMI_SLIPHDMIT_PARAM_SETTINGS_2);
- hdmi_write(hdmi, 0x00, HDMI_SLIPHDMIT_PARAM_SETTINGS_3);
- /* PLLA_CONFIG[7:0]: VCO gain, VCO offset, LPF resistance[0] */
- hdmi_write(hdmi, 0x44, HDMI_SLIPHDMIT_PARAM_SETTINGS_5);
- hdmi_write(hdmi, 0x32, HDMI_SLIPHDMIT_PARAM_SETTINGS_6);
- hdmi_write(hdmi, 0x4A, HDMI_SLIPHDMIT_PARAM_SETTINGS_7);
- hdmi_write(hdmi, 0x0E, HDMI_SLIPHDMIT_PARAM_SETTINGS_8);
- hdmi_write(hdmi, 0x25, HDMI_SLIPHDMIT_PARAM_SETTINGS_9);
- hdmi_write(hdmi, 0x04, HDMI_SLIPHDMIT_PARAM_SETTINGS_10);
+ if (hdmi->var.yres > 480) {
+ /* 720p, 8bit, 74.25MHz. Might need to be adjusted for other formats */
+ /*
+ * [1:0] Speed_A
+ * [3:2] Speed_B
+ * [4] PLLA_Bypass
+ * [6] DRV_TEST_EN
+ * [7] DRV_TEST_IN
+ */
+ hdmi_write(hdmi, 0x0f, HDMI_SLIPHDMIT_PARAM_SETTINGS_1);
+ /* PLLB_CONFIG[17], PLLA_CONFIG[17] - not in PHY datasheet */
+ hdmi_write(hdmi, 0x00, HDMI_SLIPHDMIT_PARAM_SETTINGS_2);
+ /*
+ * [2:0] BGR_I_OFFSET
+ * [6:4] BGR_V_OFFSET
+ */
+ hdmi_write(hdmi, 0x00, HDMI_SLIPHDMIT_PARAM_SETTINGS_3);
+ /* PLLA_CONFIG[7:0]: VCO gain, VCO offset, LPF resistance[0] */
+ hdmi_write(hdmi, 0x44, HDMI_SLIPHDMIT_PARAM_SETTINGS_5);
+ /*
+ * PLLA_CONFIG[15:8]: regulator voltage[0], CP current,
+ * LPF capacitance, LPF resistance[1]
+ */
+ hdmi_write(hdmi, 0x32, HDMI_SLIPHDMIT_PARAM_SETTINGS_6);
+ /* PLLB_CONFIG[7:0]: LPF resistance[0], VCO offset, VCO gain */
+ hdmi_write(hdmi, 0x4A, HDMI_SLIPHDMIT_PARAM_SETTINGS_7);
+ /*
+ * PLLB_CONFIG[15:8]: regulator voltage[0], CP current,
+ * LPF capacitance, LPF resistance[1]
+ */
+ hdmi_write(hdmi, 0x00, HDMI_SLIPHDMIT_PARAM_SETTINGS_8);
+ /* DRV_CONFIG, PE_CONFIG */
+ hdmi_write(hdmi, 0x25, HDMI_SLIPHDMIT_PARAM_SETTINGS_9);
+ /*
+ * [2:0] AMON_SEL (4 == LPF voltage)
+ * [4] PLLA_CONFIG[16]
+ * [5] PLLB_CONFIG[16]
+ */
+ hdmi_write(hdmi, 0x04, HDMI_SLIPHDMIT_PARAM_SETTINGS_10);
+ } else {
+ /* for 480p8bit 27MHz */
+ hdmi_write(hdmi, 0x19, HDMI_SLIPHDMIT_PARAM_SETTINGS_1);
+ hdmi_write(hdmi, 0x00, HDMI_SLIPHDMIT_PARAM_SETTINGS_2);
+ hdmi_write(hdmi, 0x00, HDMI_SLIPHDMIT_PARAM_SETTINGS_3);
+ hdmi_write(hdmi, 0x44, HDMI_SLIPHDMIT_PARAM_SETTINGS_5);
+ hdmi_write(hdmi, 0x32, HDMI_SLIPHDMIT_PARAM_SETTINGS_6);
+ hdmi_write(hdmi, 0x48, HDMI_SLIPHDMIT_PARAM_SETTINGS_7);
+ hdmi_write(hdmi, 0x0F, HDMI_SLIPHDMIT_PARAM_SETTINGS_8);
+ hdmi_write(hdmi, 0x20, HDMI_SLIPHDMIT_PARAM_SETTINGS_9);
+ hdmi_write(hdmi, 0x04, HDMI_SLIPHDMIT_PARAM_SETTINGS_10);
+ }
}
/**
*/
static void sh_hdmi_avi_infoframe_setup(struct sh_hdmi *hdmi)
{
+ u8 vic;
+
/* AVI InfoFrame */
hdmi_write(hdmi, 0x06, HDMI_CTRL_PKT_BUF_INDEX);
hdmi_write(hdmi, 0x00, HDMI_CTRL_PKT_BUF_ACCESS_PB1);
/*
- * C = No Data
- * M = 16:9 Picture Aspect Ratio
- * R = Same as picture aspect ratio
+ * [7:6] C = Colorimetry: no data
+ * [5:4] M = 2: 16:9, 1: 4:3 Picture Aspect Ratio
+ * [3:0] R = 8: Active Frame Aspect Ratio: same as picture aspect ratio
*/
hdmi_write(hdmi, 0x28, HDMI_CTRL_PKT_BUF_ACCESS_PB2);
/*
* VIC = 1280 x 720p: ignored if external config is used
- * Send 2 for 720 x 480p, 16 for 1080p
+ * Send 2 for 720 x 480p, 16 for 1080p, ignored in external mode
*/
- hdmi_write(hdmi, 4, HDMI_CTRL_PKT_BUF_ACCESS_PB4);
+ if (hdmi->var.yres == 1080 && hdmi->var.xres == 1920)
+ vic = 16;
+ else if (hdmi->var.yres == 480 && hdmi->var.xres == 720)
+ vic = 2;
+ else
+ vic = 4;
+ hdmi_write(hdmi, vic, HDMI_CTRL_PKT_BUF_ACCESS_PB4);
/* PR = No Repetition */
hdmi_write(hdmi, 0x00, HDMI_CTRL_PKT_BUF_ACCESS_PB5);
hdmi_write(hdmi, 0x00, HDMI_CTRL_PKT_BUF_ACCESS_PB10);
}
-/**
- * sh_hdmi_gamut_metadata_setup() - Gamut Metadata Packet of CONTROL PACKET
- */
-static void sh_hdmi_gamut_metadata_setup(struct sh_hdmi *hdmi)
-{
- int i;
-
- /* Gamut Metadata Packet */
- hdmi_write(hdmi, 0x04, HDMI_CTRL_PKT_BUF_INDEX);
-
- /* Packet Type = 0x0A */
- hdmi_write(hdmi, 0x0A, HDMI_CTRL_PKT_BUF_ACCESS_HB0);
- /* Gamut Packet is not used, so default value */
- hdmi_write(hdmi, 0x00, HDMI_CTRL_PKT_BUF_ACCESS_HB1);
- /* Gamut Packet is not used, so default value */
- hdmi_write(hdmi, 0x10, HDMI_CTRL_PKT_BUF_ACCESS_HB2);
-
- /* GBD bytes 0 through 27 */
- for (i = 0; i <= 27; i++)
- /* HDMI_CTRL_PKT_BUF_ACCESS_PB0_63H - PB27_7EH */
- hdmi_write(hdmi, 0x00, HDMI_CTRL_PKT_BUF_ACCESS_PB0 + i);
-}
-
-/**
- * sh_hdmi_acp_setup() - Audio Content Protection Packet (ACP)
- */
-static void sh_hdmi_acp_setup(struct sh_hdmi *hdmi)
-{
- int i;
-
- /* Audio Content Protection Packet (ACP) */
- hdmi_write(hdmi, 0x01, HDMI_CTRL_PKT_BUF_INDEX);
-
- /* Packet Type = 0x04 */
- hdmi_write(hdmi, 0x04, HDMI_CTRL_PKT_BUF_ACCESS_HB0);
- /* ACP_Type */
- hdmi_write(hdmi, 0x00, HDMI_CTRL_PKT_BUF_ACCESS_HB1);
- /* Reserved (0) */
- hdmi_write(hdmi, 0x00, HDMI_CTRL_PKT_BUF_ACCESS_HB2);
-
- /* GBD bytes 0 through 27 */
- for (i = 0; i <= 27; i++)
- /* HDMI_CTRL_PKT_BUF_ACCESS_PB0 - PB27 */
- hdmi_write(hdmi, 0x00, HDMI_CTRL_PKT_BUF_ACCESS_PB0 + i);
-}
-
-/**
- * sh_hdmi_isrc1_setup() - ISRC1 Packet
- */
-static void sh_hdmi_isrc1_setup(struct sh_hdmi *hdmi)
-{
- int i;
-
- /* ISRC1 Packet */
- hdmi_write(hdmi, 0x02, HDMI_CTRL_PKT_BUF_INDEX);
-
- /* Packet Type = 0x05 */
- hdmi_write(hdmi, 0x05, HDMI_CTRL_PKT_BUF_ACCESS_HB0);
- /* ISRC_Cont, ISRC_Valid, Reserved (0), ISRC_Status */
- hdmi_write(hdmi, 0x00, HDMI_CTRL_PKT_BUF_ACCESS_HB1);
- /* Reserved (0) */
- hdmi_write(hdmi, 0x00, HDMI_CTRL_PKT_BUF_ACCESS_HB2);
-
- /* PB0 UPC_EAN_ISRC_0-15 */
- /* Bytes PB16-PB27 shall be set to a value of 0. */
- for (i = 0; i <= 27; i++)
- /* HDMI_CTRL_PKT_BUF_ACCESS_PB0 - PB27 */
- hdmi_write(hdmi, 0x00, HDMI_CTRL_PKT_BUF_ACCESS_PB0 + i);
-}
-
-/**
- * sh_hdmi_isrc2_setup() - ISRC2 Packet
- */
-static void sh_hdmi_isrc2_setup(struct sh_hdmi *hdmi)
-{
- int i;
-
- /* ISRC2 Packet */
- hdmi_write(hdmi, 0x03, HDMI_CTRL_PKT_BUF_INDEX);
-
- /* HB0 Packet Type = 0x06 */
- hdmi_write(hdmi, 0x06, HDMI_CTRL_PKT_BUF_ACCESS_HB0);
- /* Reserved (0) */
- hdmi_write(hdmi, 0x00, HDMI_CTRL_PKT_BUF_ACCESS_HB1);
- /* Reserved (0) */
- hdmi_write(hdmi, 0x00, HDMI_CTRL_PKT_BUF_ACCESS_HB2);
-
- /* PB0 UPC_EAN_ISRC_16-31 */
- /* Bytes PB16-PB27 shall be set to a value of 0. */
- for (i = 0; i <= 27; i++)
- /* HDMI_CTRL_PKT_BUF_ACCESS_PB0 - PB27 */
- hdmi_write(hdmi, 0x00, HDMI_CTRL_PKT_BUF_ACCESS_PB0 + i);
-}
-
/**
* sh_hdmi_configure() - Initialise HDMI for output
*/
/* Audio InfoFrame */
sh_hdmi_audio_infoframe_setup(hdmi);
- /* Gamut Metadata packet */
- sh_hdmi_gamut_metadata_setup(hdmi);
-
- /* Audio Content Protection (ACP) Packet */
- sh_hdmi_acp_setup(hdmi);
-
- /* ISRC1 Packet */
- sh_hdmi_isrc1_setup(hdmi);
-
- /* ISRC2 Packet */
- sh_hdmi_isrc2_setup(hdmi);
-
/*
* Control packet auto send with VSYNC control: auto send
* General control, Gamut metadata, ISRC, and ACP packets
hdmi_write(hdmi, 0x40, HDMI_SYSTEM_CTRL);
}
-static void sh_hdmi_read_edid(struct sh_hdmi *hdmi)
+static unsigned long sh_hdmi_rate_error(struct sh_hdmi *hdmi,
+ const struct fb_videomode *mode)
{
- struct fb_var_screeninfo *var = &hdmi->var;
- struct sh_mobile_hdmi_info *pdata = hdmi->dev->platform_data;
- struct fb_videomode *lcd_cfg = &pdata->lcd_chan->lcd_cfg;
- unsigned long height = var->height, width = var->width;
- int i;
+ long target = PICOS2KHZ(mode->pixclock) * 1000,
+ rate = clk_round_rate(hdmi->hdmi_clk, target);
+ unsigned long rate_error = rate > 0 ? abs(rate - target) : ULONG_MAX;
+
+ dev_dbg(hdmi->dev, "%u-%u-%u-%u x %u-%u-%u-%u\n",
+ mode->left_margin, mode->xres,
+ mode->right_margin, mode->hsync_len,
+ mode->upper_margin, mode->yres,
+ mode->lower_margin, mode->vsync_len);
+
+ dev_dbg(hdmi->dev, "\t@%lu(+/-%lu)Hz, e=%lu / 1000, r=%uHz\n", target,
+ rate_error, rate_error ? 10000 / (10 * target / rate_error) : 0,
+ mode->refresh);
+
+ return rate_error;
+}
+
+static int sh_hdmi_read_edid(struct sh_hdmi *hdmi)
+{
+ struct fb_var_screeninfo tmpvar;
+ struct fb_var_screeninfo *var = &tmpvar;
+ const struct fb_videomode *mode, *found = NULL;
+ struct fb_info *info = hdmi->info;
+ struct fb_modelist *modelist = NULL;
+ unsigned int f_width = 0, f_height = 0, f_refresh = 0;
+ unsigned long found_rate_error = ULONG_MAX; /* silly compiler... */
+ bool exact_match = false;
u8 edid[128];
+ char *forced;
+ int i;
/* Read EDID */
- pr_debug("Read back EDID code:");
+ dev_dbg(hdmi->dev, "Read back EDID code:");
for (i = 0; i < 128; i++) {
edid[i] = hdmi_read(hdmi, HDMI_EDID_KSV_FIFO_ACCESS_WINDOW);
#ifdef DEBUG
#ifdef DEBUG
printk(KERN_CONT "\n");
#endif
- fb_parse_edid(edid, var);
- pr_debug("%u-%u-%u-%u x %u-%u-%u-%u @ %lu kHz monitor detected\n",
- var->left_margin, var->xres, var->right_margin, var->hsync_len,
- var->upper_margin, var->yres, var->lower_margin, var->vsync_len,
- PICOS2KHZ(var->pixclock));
-
- /* FIXME: Use user-provided configuration instead of EDID */
- var->width = width;
- var->xres = lcd_cfg->xres;
- var->xres_virtual = lcd_cfg->xres;
- var->left_margin = lcd_cfg->left_margin;
- var->right_margin = lcd_cfg->right_margin;
- var->hsync_len = lcd_cfg->hsync_len;
- var->height = height;
- var->yres = lcd_cfg->yres;
- var->yres_virtual = lcd_cfg->yres * 2;
- var->upper_margin = lcd_cfg->upper_margin;
- var->lower_margin = lcd_cfg->lower_margin;
- var->vsync_len = lcd_cfg->vsync_len;
- var->sync = lcd_cfg->sync;
- var->pixclock = lcd_cfg->pixclock;
-
- hdmi_external_video_param(hdmi);
+
+ fb_edid_to_monspecs(edid, &hdmi->monspec);
+
+ fb_get_options("sh_mobile_lcdc", &forced);
+ if (forced && *forced) {
+ /* Only primitive parsing so far */
+ i = sscanf(forced, "%ux%u@%u",
+ &f_width, &f_height, &f_refresh);
+ if (i < 2) {
+ f_width = 0;
+ f_height = 0;
+ }
+ dev_dbg(hdmi->dev, "Forced mode %ux%u@%uHz\n",
+ f_width, f_height, f_refresh);
+ }
+
+ /* Walk monitor modes to find the best or the exact match */
+ for (i = 0, mode = hdmi->monspec.modedb;
+ f_width && f_height && i < hdmi->monspec.modedb_len && !exact_match;
+ i++, mode++) {
+ unsigned long rate_error = sh_hdmi_rate_error(hdmi, mode);
+
+ /* No interest in unmatching modes */
+ if (f_width != mode->xres || f_height != mode->yres)
+ continue;
+ if (f_refresh == mode->refresh || (!f_refresh && !rate_error))
+ /*
+ * Exact match if either the refresh rate matches or it
+ * hasn't been specified and we've found a mode, for
+ * which we can configure the clock precisely
+ */
+ exact_match = true;
+ else if (found && found_rate_error <= rate_error)
+ /*
+ * We otherwise search for the closest matching clock
+ * rate - either if no refresh rate has been specified
+ * or we cannot find an exactly matching one
+ */
+ continue;
+
+ /* Check if supported: sufficient fb memory, supported clock-rate */
+ fb_videomode_to_var(var, mode);
+
+ if (info && info->fbops->fb_check_var &&
+ info->fbops->fb_check_var(var, info)) {
+ exact_match = false;
+ continue;
+ }
+
+ found = mode;
+ found_rate_error = rate_error;
+ }
+
+ /*
+ * TODO 1: if no ->info is present, postpone running the config until
+ * after ->info first gets registered.
+ * TODO 2: consider registering the HDMI platform device from the LCDC
+ * driver, and passing ->info with HDMI platform data.
+ */
+ if (info && !found) {
+ modelist = hdmi->info->modelist.next &&
+ !list_empty(&hdmi->info->modelist) ?
+ list_entry(hdmi->info->modelist.next,
+ struct fb_modelist, list) :
+ NULL;
+
+ if (modelist) {
+ found = &modelist->mode;
+ found_rate_error = sh_hdmi_rate_error(hdmi, found);
+ }
+ }
+
+ /* No cookie today */
+ if (!found)
+ return -ENXIO;
+
+ dev_info(hdmi->dev, "Using %s mode %ux%u@%uHz (%luHz), clock error %luHz\n",
+ modelist ? "default" : "EDID", found->xres, found->yres,
+ found->refresh, PICOS2KHZ(found->pixclock) * 1000, found_rate_error);
+
+ if ((found->xres == 720 && found->yres == 480) ||
+ (found->xres == 1280 && found->yres == 720) ||
+ (found->xres == 1920 && found->yres == 1080))
+ hdmi->preprogrammed_mode = true;
+ else
+ hdmi->preprogrammed_mode = false;
+
+ fb_videomode_to_var(&hdmi->var, found);
+ sh_hdmi_external_video_param(hdmi);
+
+ return 0;
}
static irqreturn_t sh_hdmi_hotplug(int irq, void *dev_id)
hdmi_write(hdmi, 0xFF, HDMI_INTERRUPT_STATUS_2);
if (printk_ratelimit())
- pr_debug("IRQ #%d: Status #1: 0x%x & 0x%x, #2: 0x%x & 0x%x\n",
- irq, status1, mask1, status2, mask2);
+ dev_dbg(hdmi->dev, "IRQ #%d: Status #1: 0x%x & 0x%x, #2: 0x%x & 0x%x\n",
+ irq, status1, mask1, status2, mask2);
if (!((status1 & mask1) | (status2 & mask2))) {
return IRQ_NONE;
udelay(500);
msens = hdmi_read(hdmi, HDMI_HOT_PLUG_MSENS_STATUS);
- pr_debug("MSENS 0x%x\n", msens);
+ dev_dbg(hdmi->dev, "MSENS 0x%x\n", msens);
/* Check, if hot plug & MSENS pin status are both high */
if ((msens & 0xC0) == 0xC0) {
/* Display plug in */
return IRQ_HANDLED;
}
-static void hdmi_display_on(void *arg, struct fb_info *info)
+/* locking: called with info->lock held, or before register_framebuffer() */
+static void sh_hdmi_display_on(void *arg, struct fb_info *info)
{
+ /*
+ * info is guaranteed to be valid, when we are called, because our
+ * FB_EVENT_FB_UNBIND notify is also called with info->lock held
+ */
struct sh_hdmi *hdmi = arg;
struct sh_mobile_hdmi_info *pdata = hdmi->dev->platform_data;
+ struct sh_mobile_lcdc_chan *ch = info->par;
- if (info->var.xres != 1280 || info->var.yres != 720) {
- dev_warn(info->device, "Unsupported framebuffer geometry %ux%u\n",
- info->var.xres, info->var.yres);
- return;
- }
+ dev_dbg(hdmi->dev, "%s(%p): state %x\n", __func__,
+ pdata->lcd_dev, info->state);
+
+ /* No need to lock */
+ hdmi->info = info;
- pr_debug("%s(%p): state %x\n", __func__, pdata->lcd_dev, info->state);
/*
- * FIXME: not a good place to store fb_info. And we cannot nullify it
- * even on monitor disconnect. What should the lifecycle be?
+ * hp_state can be set to
+ * HDMI_HOTPLUG_DISCONNECTED: on monitor unplug
+ * HDMI_HOTPLUG_CONNECTED: on monitor plug-in
+ * HDMI_HOTPLUG_EDID_DONE: on EDID read completion
*/
- hdmi->info = info;
switch (hdmi->hp_state) {
case HDMI_HOTPLUG_EDID_DONE:
/* PS mode d->e. All functions are active */
hdmi_write(hdmi, 0x80, HDMI_SYSTEM_CTRL);
- pr_debug("HDMI running\n");
+ dev_dbg(hdmi->dev, "HDMI running\n");
break;
case HDMI_HOTPLUG_DISCONNECTED:
info->state = FBINFO_STATE_SUSPENDED;
default:
- hdmi->var = info->var;
+ hdmi->var = ch->display_var;
}
}
-static void hdmi_display_off(void *arg)
+/* locking: called with info->lock held */
+static void sh_hdmi_display_off(void *arg)
{
struct sh_hdmi *hdmi = arg;
struct sh_mobile_hdmi_info *pdata = hdmi->dev->platform_data;
- pr_debug("%s(%p)\n", __func__, pdata->lcd_dev);
+ dev_dbg(hdmi->dev, "%s(%p)\n", __func__, pdata->lcd_dev);
/* PS mode e->a */
hdmi_write(hdmi, 0x10, HDMI_SYSTEM_CTRL);
}
+static bool sh_hdmi_must_reconfigure(struct sh_hdmi *hdmi)
+{
+ struct fb_info *info = hdmi->info;
+ struct sh_mobile_lcdc_chan *ch = info->par;
+ struct fb_var_screeninfo *new_var = &hdmi->var, *old_var = &ch->display_var;
+ struct fb_videomode mode1, mode2;
+
+ fb_var_to_videomode(&mode1, old_var);
+ fb_var_to_videomode(&mode2, new_var);
+
+ dev_dbg(info->dev, "Old %ux%u, new %ux%u\n",
+ mode1.xres, mode1.yres, mode2.xres, mode2.yres);
+
+ if (fb_mode_is_equal(&mode1, &mode2))
+ return false;
+
+ dev_dbg(info->dev, "Switching %u -> %u lines\n",
+ mode1.yres, mode2.yres);
+ *old_var = *new_var;
+
+ return true;
+}
+
+/**
+ * sh_hdmi_clk_configure() - set HDMI clock frequency and enable the clock
+ * @hdmi: driver context
+ * @pixclock: pixel clock period in picoseconds
+ * return: configured positive rate if successful
+ * 0 if couldn't set the rate, but managed to enable the clock
+ * negative error, if couldn't enable the clock
+ */
+static long sh_hdmi_clk_configure(struct sh_hdmi *hdmi, unsigned long pixclock)
+{
+ long rate;
+ int ret;
+
+ rate = PICOS2KHZ(pixclock) * 1000;
+ rate = clk_round_rate(hdmi->hdmi_clk, rate);
+ if (rate > 0) {
+ ret = clk_set_rate(hdmi->hdmi_clk, rate);
+ if (ret < 0) {
+ dev_warn(hdmi->dev, "Cannot set rate %ld: %d\n", rate, ret);
+ rate = 0;
+ } else {
+ dev_dbg(hdmi->dev, "HDMI set frequency %lu\n", rate);
+ }
+ } else {
+ rate = 0;
+ dev_warn(hdmi->dev, "Cannot get suitable rate: %ld\n", rate);
+ }
+
+ ret = clk_enable(hdmi->hdmi_clk);
+ if (ret < 0) {
+ dev_err(hdmi->dev, "Cannot enable clock: %d\n", ret);
+ return ret;
+ }
+
+ return rate;
+}
+
/* Hotplug interrupt occurred, read EDID */
-static void edid_work_fn(struct work_struct *work)
+static void sh_hdmi_edid_work_fn(struct work_struct *work)
{
struct sh_hdmi *hdmi = container_of(work, struct sh_hdmi, edid_work.work);
struct sh_mobile_hdmi_info *pdata = hdmi->dev->platform_data;
+ struct sh_mobile_lcdc_chan *ch;
+ int ret;
- pr_debug("%s(%p): begin, hotplug status %d\n", __func__,
- pdata->lcd_dev, hdmi->hp_state);
+ dev_dbg(hdmi->dev, "%s(%p): begin, hotplug status %d\n", __func__,
+ pdata->lcd_dev, hdmi->hp_state);
if (!pdata->lcd_dev)
return;
+ mutex_lock(&hdmi->mutex);
+
if (hdmi->hp_state == HDMI_HOTPLUG_EDID_DONE) {
- pm_runtime_get_sync(hdmi->dev);
/* A device has been plugged in */
- sh_hdmi_read_edid(hdmi);
+ pm_runtime_get_sync(hdmi->dev);
+
+ ret = sh_hdmi_read_edid(hdmi);
+ if (ret < 0)
+ goto out;
+
+ /* Reconfigure the clock */
+ clk_disable(hdmi->hdmi_clk);
+ ret = sh_hdmi_clk_configure(hdmi, hdmi->var.pixclock);
+ if (ret < 0)
+ goto out;
+
msleep(10);
sh_hdmi_configure(hdmi);
/* Switched to another (d) power-save mode */
msleep(10);
if (!hdmi->info)
- return;
+ goto out;
+
+ ch = hdmi->info->par;
acquire_console_sem();
/* HDMI plug in */
- hdmi->info->var = hdmi->var;
- if (hdmi->info->state != FBINFO_STATE_RUNNING)
+ if (!sh_hdmi_must_reconfigure(hdmi) &&
+ hdmi->info->state == FBINFO_STATE_RUNNING) {
+ /*
+ * First activation with the default monitor - just turn
+ * on, if we run a resume here, the logo disappears
+ */
+ if (lock_fb_info(hdmi->info)) {
+ sh_hdmi_display_on(hdmi, hdmi->info);
+ unlock_fb_info(hdmi->info);
+ }
+ } else {
+ /* New monitor or have to wake up */
fb_set_suspend(hdmi->info, 0);
- else
- hdmi_display_on(hdmi, hdmi->info);
+ }
release_console_sem();
} else {
+ ret = 0;
if (!hdmi->info)
- return;
+ goto out;
acquire_console_sem();
release_console_sem();
pm_runtime_put(hdmi->dev);
+ fb_destroy_modedb(hdmi->monspec.modedb);
}
- pr_debug("%s(%p): end\n", __func__, pdata->lcd_dev);
+out:
+ if (ret < 0)
+ hdmi->hp_state = HDMI_HOTPLUG_DISCONNECTED;
+ mutex_unlock(&hdmi->mutex);
+
+ dev_dbg(hdmi->dev, "%s(%p): end\n", __func__, pdata->lcd_dev);
+}
+
+static int sh_hdmi_notify(struct notifier_block *nb,
+ unsigned long action, void *data);
+
+static struct notifier_block sh_hdmi_notifier = {
+ .notifier_call = sh_hdmi_notify,
+};
+
+static int sh_hdmi_notify(struct notifier_block *nb,
+ unsigned long action, void *data)
+{
+ struct fb_event *event = data;
+ struct fb_info *info = event->info;
+ struct sh_mobile_lcdc_chan *ch = info->par;
+ struct sh_mobile_lcdc_board_cfg *board_cfg = &ch->cfg.board_cfg;
+ struct sh_hdmi *hdmi = board_cfg->board_data;
+
+ if (nb != &sh_hdmi_notifier || !hdmi || hdmi->info != info)
+ return NOTIFY_DONE;
+
+ switch(action) {
+ case FB_EVENT_FB_REGISTERED:
+ /* Unneeded, activation taken care by sh_hdmi_display_on() */
+ break;
+ case FB_EVENT_FB_UNREGISTERED:
+ /*
+ * We are called from unregister_framebuffer() with the
+ * info->lock held. This is bad for us, because we can race with
+ * the scheduled work, which has to call fb_set_suspend(), which
+ * takes info->lock internally, so, sh_hdmi_edid_work_fn()
+ * cannot take and hold info->lock for the whole function
+ * duration. Using an additional lock creates a classical AB-BA
+ * lock up. Therefore, we have to release the info->lock
+ * temporarily, synchronise with the work queue and re-acquire
+ * the info->lock.
+ */
+ unlock_fb_info(hdmi->info);
+ mutex_lock(&hdmi->mutex);
+ hdmi->info = NULL;
+ mutex_unlock(&hdmi->mutex);
+ lock_fb_info(hdmi->info);
+ return NOTIFY_OK;
+ }
+ return NOTIFY_DONE;
}
static int __init sh_hdmi_probe(struct platform_device *pdev)
{
struct sh_mobile_hdmi_info *pdata = pdev->dev.platform_data;
struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ struct sh_mobile_lcdc_board_cfg *board_cfg;
int irq = platform_get_irq(pdev, 0), ret;
struct sh_hdmi *hdmi;
long rate;
return -ENOMEM;
}
- ret = snd_soc_register_codec(&pdev->dev,
- &soc_codec_dev_sh_hdmi, &sh_hdmi_dai, 1);
- if (ret < 0)
- goto esndreg;
+ mutex_init(&hdmi->mutex);
hdmi->dev = &pdev->dev;
goto egetclk;
}
- rate = PICOS2KHZ(pdata->lcd_chan->lcd_cfg.pixclock) * 1000;
-
- rate = clk_round_rate(hdmi->hdmi_clk, rate);
+ /* Some arbitrary relaxed pixclock just to get things started */
+ rate = sh_hdmi_clk_configure(hdmi, 37037);
if (rate < 0) {
ret = rate;
- dev_err(&pdev->dev, "Cannot get suitable rate: %ld\n", rate);
goto erate;
}
- ret = clk_set_rate(hdmi->hdmi_clk, rate);
- if (ret < 0) {
- dev_err(&pdev->dev, "Cannot set rate %ld: %d\n", rate, ret);
- goto erate;
- }
-
- pr_debug("HDMI set frequency %lu\n", rate);
-
- ret = clk_enable(hdmi->hdmi_clk);
- if (ret < 0) {
- dev_err(&pdev->dev, "Cannot enable clock: %d\n", ret);
- goto eclkenable;
- }
-
- dev_info(&pdev->dev, "Enabled HDMI clock at %luHz\n", rate);
+ dev_dbg(&pdev->dev, "Enabled HDMI clock at %luHz\n", rate);
if (!request_mem_region(res->start, resource_size(res), dev_name(&pdev->dev))) {
dev_err(&pdev->dev, "HDMI register region already claimed\n");
platform_set_drvdata(pdev, hdmi);
-#if 1
/* Product and revision IDs are 0 in sh-mobile version */
dev_info(&pdev->dev, "Detected HDMI controller 0x%x:0x%x\n",
hdmi_read(hdmi, HDMI_PRODUCT_ID), hdmi_read(hdmi, HDMI_REVISION_ID));
-#endif
/* Set up LCDC callbacks */
- pdata->lcd_chan->board_cfg.board_data = hdmi;
- pdata->lcd_chan->board_cfg.display_on = hdmi_display_on;
- pdata->lcd_chan->board_cfg.display_off = hdmi_display_off;
+ board_cfg = &pdata->lcd_chan->board_cfg;
+ board_cfg->owner = THIS_MODULE;
+ board_cfg->board_data = hdmi;
+ board_cfg->display_on = sh_hdmi_display_on;
+ board_cfg->display_off = sh_hdmi_display_off;
- INIT_DELAYED_WORK(&hdmi->edid_work, edid_work_fn);
+ INIT_DELAYED_WORK(&hdmi->edid_work, sh_hdmi_edid_work_fn);
pm_runtime_enable(&pdev->dev);
pm_runtime_resume(&pdev->dev);
goto ereqirq;
}
+ ret = snd_soc_register_codec(&pdev->dev,
+ &soc_codec_dev_sh_hdmi, &sh_hdmi_dai, 1);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "codec registration failed\n");
+ goto ecodec;
+ }
+
return 0;
+ecodec:
+ free_irq(irq, hdmi);
ereqirq:
pm_runtime_disable(&pdev->dev);
iounmap(hdmi->base);
release_mem_region(res->start, resource_size(res));
ereqreg:
clk_disable(hdmi->hdmi_clk);
-eclkenable:
erate:
clk_put(hdmi->hdmi_clk);
egetclk:
- snd_soc_unregister_codec(&pdev->dev);
-esndreg:
+ mutex_destroy(&hdmi->mutex);
kfree(hdmi);
return ret;
struct sh_mobile_hdmi_info *pdata = pdev->dev.platform_data;
struct sh_hdmi *hdmi = platform_get_drvdata(pdev);
struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ struct sh_mobile_lcdc_board_cfg *board_cfg = &pdata->lcd_chan->board_cfg;
int irq = platform_get_irq(pdev, 0);
snd_soc_unregister_codec(&pdev->dev);
- pdata->lcd_chan->board_cfg.display_on = NULL;
- pdata->lcd_chan->board_cfg.display_off = NULL;
- pdata->lcd_chan->board_cfg.board_data = NULL;
+ board_cfg->display_on = NULL;
+ board_cfg->display_off = NULL;
+ board_cfg->board_data = NULL;
+ board_cfg->owner = NULL;
+ /* No new work will be scheduled, wait for running ISR */
free_irq(irq, hdmi);
- pm_runtime_disable(&pdev->dev);
+ /* Wait for already scheduled work */
cancel_delayed_work_sync(&hdmi->edid_work);
+ pm_runtime_disable(&pdev->dev);
clk_disable(hdmi->hdmi_clk);
clk_put(hdmi->hdmi_clk);
iounmap(hdmi->base);
release_mem_region(res->start, resource_size(res));
+ mutex_destroy(&hdmi->mutex);
kfree(hdmi);
return 0;
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/mm.h>
-#include <linux/fb.h>
#include <linux/clk.h>
#include <linux/pm_runtime.h>
#include <linux/platform_device.h>
#include <linux/vmalloc.h>
#include <linux/ioctl.h>
#include <linux/slab.h>
+#include <linux/console.h>
#include <video/sh_mobile_lcdc.h>
#include <asm/atomic.h>
-#define PALETTE_NR 16
+#include "sh_mobile_lcdcfb.h"
+
#define SIDE_B_OFFSET 0x1000
#define MIRROR_OFFSET 0x2000
};
#define NR_SHARED_REGS ARRAY_SIZE(lcdc_shared_regs)
-/* per-channel registers */
-enum { LDDCKPAT1R, LDDCKPAT2R, LDMT1R, LDMT2R, LDMT3R, LDDFR, LDSM1R,
- LDSM2R, LDSA1R, LDMLSR, LDHCNR, LDHSYNR, LDVLNR, LDVSYNR, LDPMR,
- LDHAJR,
- NR_CH_REGS };
+#define DEFAULT_XRES 1280
+#define DEFAULT_YRES 1024
static unsigned long lcdc_offs_mainlcd[NR_CH_REGS] = {
[LDDCKPAT1R] = 0x400,
#define LDRCNTR_MRC 0x00000001
#define LDSR_MRS 0x00000100
-struct sh_mobile_lcdc_priv;
-struct sh_mobile_lcdc_chan {
- struct sh_mobile_lcdc_priv *lcdc;
- unsigned long *reg_offs;
- unsigned long ldmt1r_value;
- unsigned long enabled; /* ME and SE in LDCNT2R */
- struct sh_mobile_lcdc_chan_cfg cfg;
- u32 pseudo_palette[PALETTE_NR];
- unsigned long saved_ch_regs[NR_CH_REGS];
- struct fb_info *info;
- dma_addr_t dma_handle;
- struct fb_deferred_io defio;
- struct scatterlist *sglist;
- unsigned long frame_end;
- unsigned long pan_offset;
- wait_queue_head_t frame_end_wait;
- struct completion vsync_completion;
+static const struct fb_videomode default_720p = {
+ .name = "HDMI 720p",
+ .xres = 1280,
+ .yres = 720,
+
+ .left_margin = 200,
+ .right_margin = 88,
+ .hsync_len = 48,
+
+ .upper_margin = 20,
+ .lower_margin = 5,
+ .vsync_len = 5,
+
+ .pixclock = 13468,
+ .sync = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_HOR_HIGH_ACT,
};
struct sh_mobile_lcdc_priv {
static void sh_mobile_lcdc_geometry(struct sh_mobile_lcdc_chan *ch)
{
- struct fb_var_screeninfo *var = &ch->info->var;
- unsigned long h_total, hsync_pos;
+ struct fb_var_screeninfo *var = &ch->info->var, *display_var = &ch->display_var;
+ unsigned long h_total, hsync_pos, display_h_total;
u32 tmp;
tmp = ch->ldmt1r_value;
lcdc_write_chan(ch, LDMT3R, ch->cfg.sys_bus_cfg.ldmt3r);
/* horizontal configuration */
- h_total = var->xres + var->hsync_len +
- var->left_margin + var->right_margin;
+ h_total = display_var->xres + display_var->hsync_len +
+ display_var->left_margin + display_var->right_margin;
tmp = h_total / 8; /* HTCN */
- tmp |= (var->xres / 8) << 16; /* HDCN */
+ tmp |= (min(display_var->xres, var->xres) / 8) << 16; /* HDCN */
lcdc_write_chan(ch, LDHCNR, tmp);
- hsync_pos = var->xres + var->right_margin;
+ hsync_pos = display_var->xres + display_var->right_margin;
tmp = hsync_pos / 8; /* HSYNP */
- tmp |= (var->hsync_len / 8) << 16; /* HSYNW */
+ tmp |= (display_var->hsync_len / 8) << 16; /* HSYNW */
lcdc_write_chan(ch, LDHSYNR, tmp);
/* vertical configuration */
- tmp = var->yres + var->vsync_len +
- var->upper_margin + var->lower_margin; /* VTLN */
- tmp |= var->yres << 16; /* VDLN */
+ tmp = display_var->yres + display_var->vsync_len +
+ display_var->upper_margin + display_var->lower_margin; /* VTLN */
+ tmp |= min(display_var->yres, var->yres) << 16; /* VDLN */
lcdc_write_chan(ch, LDVLNR, tmp);
- tmp = var->yres + var->lower_margin; /* VSYNP */
- tmp |= var->vsync_len << 16; /* VSYNW */
+ tmp = display_var->yres + display_var->lower_margin; /* VSYNP */
+ tmp |= display_var->vsync_len << 16; /* VSYNW */
lcdc_write_chan(ch, LDVSYNR, tmp);
/* Adjust horizontal synchronisation for HDMI */
- tmp = ((var->xres & 7) << 24) |
- ((h_total & 7) << 16) |
- ((var->hsync_len & 7) << 8) |
+ display_h_total = display_var->xres + display_var->hsync_len +
+ display_var->left_margin + display_var->right_margin;
+ tmp = ((display_var->xres & 7) << 24) |
+ ((display_h_total & 7) << 16) |
+ ((display_var->hsync_len & 7) << 8) |
hsync_pos;
lcdc_write_chan(ch, LDHAJR, tmp);
}
static int sh_mobile_lcdc_start(struct sh_mobile_lcdc_priv *priv)
{
struct sh_mobile_lcdc_chan *ch;
- struct fb_videomode *lcd_cfg;
struct sh_mobile_lcdc_board_cfg *board_cfg;
unsigned long tmp;
int k, m;
m = 1 << 6;
tmp |= m << (lcdc_chan_is_sublcd(ch) ? 8 : 0);
- lcdc_write_chan(ch, LDDCKPAT1R, 0x00000000);
+ /* FIXME: sh7724 can only use 42, 48, 54 and 60 for the divider denominator */
+ lcdc_write_chan(ch, LDDCKPAT1R, 0);
lcdc_write_chan(ch, LDDCKPAT2R, (1 << (m/2)) - 1);
}
for (k = 0; k < ARRAY_SIZE(priv->ch); k++) {
ch = &priv->ch[k];
- lcd_cfg = &ch->cfg.lcd_cfg;
if (!ch->enabled)
continue;
/* set bpp format in PKF[4:0] */
tmp = lcdc_read_chan(ch, LDDFR);
- tmp &= ~(0x0001001f);
+ tmp &= ~0x0001001f;
tmp |= (ch->info->var.bits_per_pixel == 16) ? 3 : 0;
lcdc_write_chan(ch, LDDFR, tmp);
continue;
board_cfg = &ch->cfg.board_cfg;
- if (board_cfg->display_on)
+ if (try_module_get(board_cfg->owner) && board_cfg->display_on) {
board_cfg->display_on(board_cfg->board_data, ch->info);
+ module_put(board_cfg->owner);
+ }
}
return 0;
* flush frame, and wait for frame end interrupt
* clean up deferred io and enable clock
*/
- if (ch->info->fbdefio) {
+ if (ch->info && ch->info->fbdefio) {
ch->frame_end = 0;
schedule_delayed_work(&ch->info->deferred_work, 0);
wait_event(ch->frame_end_wait, ch->frame_end);
}
board_cfg = &ch->cfg.board_cfg;
- if (board_cfg->display_off)
+ if (try_module_get(board_cfg->owner) && board_cfg->display_off) {
board_cfg->display_off(board_cfg->board_data);
+ module_put(board_cfg->owner);
+ }
}
/* stop the lcdc */
return PTR_ERR(priv->dot_clk);
}
}
- atomic_set(&priv->hw_usecnt, -1);
/* Runtime PM support involves two step for this driver:
* 1) Enable Runtime PM
return retval;
}
+static void sh_mobile_fb_reconfig(struct fb_info *info)
+{
+ struct sh_mobile_lcdc_chan *ch = info->par;
+ struct fb_videomode mode1, mode2;
+ struct fb_event event;
+ int evnt = FB_EVENT_MODE_CHANGE_ALL;
+
+ if (ch->use_count > 1 || (ch->use_count == 1 && !info->fbcon_par))
+ /* More framebuffer users are active */
+ return;
+
+ fb_var_to_videomode(&mode1, &ch->display_var);
+ fb_var_to_videomode(&mode2, &info->var);
+
+ if (fb_mode_is_equal(&mode1, &mode2))
+ return;
+
+ /* Display has been re-plugged, framebuffer is free now, reconfigure */
+ if (fb_set_var(info, &ch->display_var) < 0)
+ /* Couldn't reconfigure, hopefully, can continue as before */
+ return;
+
+ info->fix.line_length = mode2.xres * (ch->cfg.bpp / 8);
+
+ /*
+ * fb_set_var() calls the notifier change internally, only if
+ * FBINFO_MISC_USEREVENT flag is set. Since we do not want to fake a
+ * user event, we have to call the chain ourselves.
+ */
+ event.info = info;
+ event.data = &mode2;
+ fb_notifier_call_chain(evnt, &event);
+}
+
+/*
+ * Locking: both .fb_release() and .fb_open() are called with info->lock held if
+ * user == 1, or with console sem held, if user == 0.
+ */
+static int sh_mobile_release(struct fb_info *info, int user)
+{
+ struct sh_mobile_lcdc_chan *ch = info->par;
+
+ mutex_lock(&ch->open_lock);
+ dev_dbg(info->dev, "%s(): %d users\n", __func__, ch->use_count);
+
+ ch->use_count--;
+
+ /* Nothing to reconfigure, when called from fbcon */
+ if (user) {
+ acquire_console_sem();
+ sh_mobile_fb_reconfig(info);
+ release_console_sem();
+ }
+
+ mutex_unlock(&ch->open_lock);
+
+ return 0;
+}
+
+static int sh_mobile_open(struct fb_info *info, int user)
+{
+ struct sh_mobile_lcdc_chan *ch = info->par;
+
+ mutex_lock(&ch->open_lock);
+ ch->use_count++;
+
+ dev_dbg(info->dev, "%s(): %d users\n", __func__, ch->use_count);
+ mutex_unlock(&ch->open_lock);
+
+ return 0;
+}
+
+static int sh_mobile_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
+{
+ struct sh_mobile_lcdc_chan *ch = info->par;
+
+ if (var->xres < 160 || var->xres > 1920 ||
+ var->yres < 120 || var->yres > 1080 ||
+ var->left_margin < 32 || var->left_margin > 320 ||
+ var->right_margin < 12 || var->right_margin > 240 ||
+ var->upper_margin < 12 || var->upper_margin > 120 ||
+ var->lower_margin < 1 || var->lower_margin > 64 ||
+ var->hsync_len < 32 || var->hsync_len > 240 ||
+ var->vsync_len < 2 || var->vsync_len > 64 ||
+ var->pixclock < 6000 || var->pixclock > 40000 ||
+ var->xres * var->yres * (ch->cfg.bpp / 8) * 2 > info->fix.smem_len) {
+ dev_warn(info->dev, "Invalid info: %u %u %u %u %u %u %u %u %u!\n",
+ var->xres, var->yres,
+ var->left_margin, var->right_margin,
+ var->upper_margin, var->lower_margin,
+ var->hsync_len, var->vsync_len,
+ var->pixclock);
+ return -EINVAL;
+ }
+ return 0;
+}
static struct fb_ops sh_mobile_lcdc_ops = {
.owner = THIS_MODULE,
.fb_imageblit = sh_mobile_lcdc_imageblit,
.fb_pan_display = sh_mobile_fb_pan_display,
.fb_ioctl = sh_mobile_ioctl,
+ .fb_open = sh_mobile_open,
+ .fb_release = sh_mobile_release,
+ .fb_check_var = sh_mobile_check_var,
};
static int sh_mobile_lcdc_set_bpp(struct fb_var_screeninfo *var, int bpp)
.runtime_resume = sh_mobile_lcdc_runtime_resume,
};
+/* locking: called with info->lock held */
static int sh_mobile_lcdc_notify(struct notifier_block *nb,
unsigned long action, void *data)
{
struct fb_info *info = event->info;
struct sh_mobile_lcdc_chan *ch = info->par;
struct sh_mobile_lcdc_board_cfg *board_cfg = &ch->cfg.board_cfg;
- struct fb_var_screeninfo *var;
+ int ret;
if (&ch->lcdc->notifier != nb)
- return 0;
+ return NOTIFY_DONE;
dev_dbg(info->dev, "%s(): action = %lu, data = %p\n",
__func__, action, event->data);
switch(action) {
case FB_EVENT_SUSPEND:
- if (board_cfg->display_off)
+ if (try_module_get(board_cfg->owner) && board_cfg->display_off) {
board_cfg->display_off(board_cfg->board_data);
+ module_put(board_cfg->owner);
+ }
pm_runtime_put(info->device);
+ sh_mobile_lcdc_stop(ch->lcdc);
break;
case FB_EVENT_RESUME:
- var = &info->var;
+ mutex_lock(&ch->open_lock);
+ sh_mobile_fb_reconfig(info);
+ mutex_unlock(&ch->open_lock);
/* HDMI must be enabled before LCDC configuration */
- if (board_cfg->display_on)
- board_cfg->display_on(board_cfg->board_data, ch->info);
-
- /* Check if the new display is not in our modelist */
- if (ch->info->modelist.next &&
- !fb_match_mode(var, &ch->info->modelist)) {
- struct fb_videomode mode;
- int ret;
-
- /* Can we handle this display? */
- if (var->xres > ch->cfg.lcd_cfg.xres ||
- var->yres > ch->cfg.lcd_cfg.yres)
- return -ENOMEM;
-
- /* Add to the modelist */
- fb_var_to_videomode(&mode, var);
- ret = fb_add_videomode(&mode, &ch->info->modelist);
- if (ret < 0)
- return ret;
+ if (try_module_get(board_cfg->owner) && board_cfg->display_on) {
+ board_cfg->display_on(board_cfg->board_data, info);
+ module_put(board_cfg->owner);
}
- pm_runtime_get_sync(info->device);
-
- sh_mobile_lcdc_geometry(ch);
-
- break;
+ ret = sh_mobile_lcdc_start(ch->lcdc);
+ if (!ret)
+ pm_runtime_get_sync(info->device);
}
- return 0;
+ return NOTIFY_OK;
}
static int sh_mobile_lcdc_remove(struct platform_device *pdev);
{
struct fb_info *info;
struct sh_mobile_lcdc_priv *priv;
- struct sh_mobile_lcdc_info *pdata;
- struct sh_mobile_lcdc_chan_cfg *cfg;
+ struct sh_mobile_lcdc_info *pdata = pdev->dev.platform_data;
struct resource *res;
int error;
void *buf;
int i, j;
- if (!pdev->dev.platform_data) {
+ if (!pdata) {
dev_err(&pdev->dev, "no platform data defined\n");
return -EINVAL;
}
}
priv->irq = i;
- pdata = pdev->dev.platform_data;
+ atomic_set(&priv->hw_usecnt, -1);
j = 0;
for (i = 0; i < ARRAY_SIZE(pdata->ch); i++) {
- priv->ch[j].lcdc = priv;
- memcpy(&priv->ch[j].cfg, &pdata->ch[i], sizeof(pdata->ch[i]));
+ struct sh_mobile_lcdc_chan *ch = priv->ch + j;
+
+ ch->lcdc = priv;
+ memcpy(&ch->cfg, &pdata->ch[i], sizeof(pdata->ch[i]));
- error = sh_mobile_lcdc_check_interface(&priv->ch[j]);
+ error = sh_mobile_lcdc_check_interface(ch);
if (error) {
dev_err(&pdev->dev, "unsupported interface type\n");
goto err1;
}
- init_waitqueue_head(&priv->ch[j].frame_end_wait);
- init_completion(&priv->ch[j].vsync_completion);
- priv->ch[j].pan_offset = 0;
+ init_waitqueue_head(&ch->frame_end_wait);
+ init_completion(&ch->vsync_completion);
+ ch->pan_offset = 0;
switch (pdata->ch[i].chan) {
case LCDC_CHAN_MAINLCD:
- priv->ch[j].enabled = 1 << 1;
- priv->ch[j].reg_offs = lcdc_offs_mainlcd;
+ ch->enabled = 1 << 1;
+ ch->reg_offs = lcdc_offs_mainlcd;
j++;
break;
case LCDC_CHAN_SUBLCD:
- priv->ch[j].enabled = 1 << 2;
- priv->ch[j].reg_offs = lcdc_offs_sublcd;
+ ch->enabled = 1 << 2;
+ ch->reg_offs = lcdc_offs_sublcd;
j++;
break;
}
for (i = 0; i < j; i++) {
struct fb_var_screeninfo *var;
- struct fb_videomode *lcd_cfg;
- cfg = &priv->ch[i].cfg;
+ const struct fb_videomode *lcd_cfg, *max_cfg = NULL;
+ struct sh_mobile_lcdc_chan *ch = priv->ch + i;
+ struct sh_mobile_lcdc_chan_cfg *cfg = &ch->cfg;
+ const struct fb_videomode *mode = cfg->lcd_cfg;
+ unsigned long max_size = 0;
+ int k;
- priv->ch[i].info = framebuffer_alloc(0, &pdev->dev);
- if (!priv->ch[i].info) {
+ ch->info = framebuffer_alloc(0, &pdev->dev);
+ if (!ch->info) {
dev_err(&pdev->dev, "unable to allocate fb_info\n");
error = -ENOMEM;
break;
}
- info = priv->ch[i].info;
+ info = ch->info;
var = &info->var;
- lcd_cfg = &cfg->lcd_cfg;
info->fbops = &sh_mobile_lcdc_ops;
- var->xres = var->xres_virtual = lcd_cfg->xres;
- var->yres = lcd_cfg->yres;
+ info->par = ch;
+
+ mutex_init(&ch->open_lock);
+
+ for (k = 0, lcd_cfg = mode;
+ k < cfg->num_cfg && lcd_cfg;
+ k++, lcd_cfg++) {
+ unsigned long size = lcd_cfg->yres * lcd_cfg->xres;
+
+ if (size > max_size) {
+ max_cfg = lcd_cfg;
+ max_size = size;
+ }
+ }
+
+ if (!mode)
+ max_size = DEFAULT_XRES * DEFAULT_YRES;
+ else if (max_cfg)
+ dev_dbg(&pdev->dev, "Found largest videomode %ux%u\n",
+ max_cfg->xres, max_cfg->yres);
+
+ info->fix = sh_mobile_lcdc_fix;
+ info->fix.smem_len = max_size * (cfg->bpp / 8) * 2;
+
+ if (!mode)
+ mode = &default_720p;
+
+ fb_videomode_to_var(var, mode);
/* Default Y virtual resolution is 2x panel size */
var->yres_virtual = var->yres * 2;
- var->width = cfg->lcd_size_cfg.width;
- var->height = cfg->lcd_size_cfg.height;
var->activate = FB_ACTIVATE_NOW;
- var->left_margin = lcd_cfg->left_margin;
- var->right_margin = lcd_cfg->right_margin;
- var->upper_margin = lcd_cfg->upper_margin;
- var->lower_margin = lcd_cfg->lower_margin;
- var->hsync_len = lcd_cfg->hsync_len;
- var->vsync_len = lcd_cfg->vsync_len;
- var->sync = lcd_cfg->sync;
- var->pixclock = lcd_cfg->pixclock;
error = sh_mobile_lcdc_set_bpp(var, cfg->bpp);
if (error)
break;
- info->fix = sh_mobile_lcdc_fix;
- info->fix.line_length = lcd_cfg->xres * (cfg->bpp / 8);
- info->fix.smem_len = info->fix.line_length *
- var->yres_virtual;
-
buf = dma_alloc_coherent(&pdev->dev, info->fix.smem_len,
- &priv->ch[i].dma_handle, GFP_KERNEL);
+ &ch->dma_handle, GFP_KERNEL);
if (!buf) {
dev_err(&pdev->dev, "unable to allocate buffer\n");
error = -ENOMEM;
break;
}
- info->pseudo_palette = &priv->ch[i].pseudo_palette;
+ info->pseudo_palette = &ch->pseudo_palette;
info->flags = FBINFO_FLAG_DEFAULT;
error = fb_alloc_cmap(&info->cmap, PALETTE_NR, 0);
if (error < 0) {
dev_err(&pdev->dev, "unable to allocate cmap\n");
dma_free_coherent(&pdev->dev, info->fix.smem_len,
- buf, priv->ch[i].dma_handle);
+ buf, ch->dma_handle);
break;
}
- memset(buf, 0, info->fix.smem_len);
- info->fix.smem_start = priv->ch[i].dma_handle;
+ info->fix.smem_start = ch->dma_handle;
+ info->fix.line_length = var->xres * (cfg->bpp / 8);
info->screen_base = buf;
info->device = &pdev->dev;
- info->par = &priv->ch[i];
+ ch->display_var = *var;
}
if (error)
for (i = 0; i < j; i++) {
struct sh_mobile_lcdc_chan *ch = priv->ch + i;
+ const struct fb_videomode *mode = ch->cfg.lcd_cfg;
+
+ if (!mode)
+ mode = &default_720p;
info = ch->info;
}
}
+ fb_videomode_to_modelist(mode, ch->cfg.num_cfg, &info->modelist);
error = register_framebuffer(info);
if (error < 0)
goto err1;
pdev->name,
(ch->cfg.chan == LCDC_CHAN_MAINLCD) ?
"mainlcd" : "sublcd",
- (int) ch->cfg.lcd_cfg.xres,
- (int) ch->cfg.lcd_cfg.yres,
+ info->var.xres, info->var.yres,
ch->cfg.bpp);
/* deferred io mode: disable clock to save power */
--- /dev/null
+#ifndef SH_MOBILE_LCDCFB_H
+#define SH_MOBILE_LCDCFB_H
+
+#include <linux/completion.h>
+#include <linux/fb.h>
+#include <linux/mutex.h>
+#include <linux/wait.h>
+
+/* per-channel registers */
+enum { LDDCKPAT1R, LDDCKPAT2R, LDMT1R, LDMT2R, LDMT3R, LDDFR, LDSM1R,
+ LDSM2R, LDSA1R, LDMLSR, LDHCNR, LDHSYNR, LDVLNR, LDVSYNR, LDPMR,
+ LDHAJR,
+ NR_CH_REGS };
+
+#define PALETTE_NR 16
+
+struct sh_mobile_lcdc_priv;
+struct fb_info;
+
+struct sh_mobile_lcdc_chan {
+ struct sh_mobile_lcdc_priv *lcdc;
+ unsigned long *reg_offs;
+ unsigned long ldmt1r_value;
+ unsigned long enabled; /* ME and SE in LDCNT2R */
+ struct sh_mobile_lcdc_chan_cfg cfg;
+ u32 pseudo_palette[PALETTE_NR];
+ unsigned long saved_ch_regs[NR_CH_REGS];
+ struct fb_info *info;
+ dma_addr_t dma_handle;
+ struct fb_deferred_io defio;
+ struct scatterlist *sglist;
+ unsigned long frame_end;
+ unsigned long pan_offset;
+ wait_queue_head_t frame_end_wait;
+ struct completion vsync_completion;
+ struct fb_var_screeninfo display_var;
+ int use_count;
+ struct mutex open_lock; /* protects the use counter */
+};
+
+#endif
unsigned long (*read_data)(void *handle);
};
+struct module;
struct sh_mobile_lcdc_board_cfg {
+ struct module *owner;
void *board_data;
int (*setup_sys)(void *board_data, void *sys_ops_handle,
struct sh_mobile_lcdc_sys_bus_ops *sys_ops);
int interface_type; /* selects RGBn or SYSn I/F, see above */
int clock_divider;
unsigned long flags; /* LCDC_FLAGS_... */
- struct fb_videomode lcd_cfg;
+ const struct fb_videomode *lcd_cfg;
+ int num_cfg;
struct sh_mobile_lcdc_lcd_size_cfg lcd_size_cfg;
struct sh_mobile_lcdc_board_cfg board_cfg;
struct sh_mobile_lcdc_sys_bus_cfg sys_bus_cfg; /* only for SYSn I/F */
git://bbs.cooldavid.org / net-next-2.6.git / commitdiff