S: Maintained
F: arch/arm/mach-s5p*/
+ARM/SAMSUNG S5P SERIES FIMC SUPPORT
+M: Kyungmin Park <kyungmin.park@samsung.com>
+M: Sylwester Nawrocki <s.nawrocki@samsung.com>
+L: linux-arm-kernel@lists.infradead.org
+L: linux-media@vger.kernel.org
+S: Maintained
+F: arch/arm/plat-s5p/dev-fimc*
+F: arch/arm/plat-samsung/include/plat/*fimc*
+F: drivers/media/video/s5p-fimc/
+
ARM/SHMOBILE ARM ARCHITECTURE
M: Paul Mundt <lethal@linux-sh.org>
M: Magnus Damm <magnus.damm@gmail.com>
F: drivers/scsi/gdt*
GENERIC GPIO I2C DRIVER
-M: Haavard Skinnemoen <hskinnemoen@atmel.com>
+M: Haavard Skinnemoen <hskinnemoen@gmail.com>
S: Supported
F: drivers/i2c/busses/i2c-gpio.c
F: include/linux/i2c-gpio.h
VERSION = 2
PATCHLEVEL = 6
SUBLEVEL = 36
-EXTRAVERSION = -rc6
+EXTRAVERSION = -rc7
NAME = Sheep on Meth
# *DOCUMENTATION*
select HAVE_KPROBES
select HAVE_KRETPROBES
select RTC_LIB if !MACH_LOONGSON
+ select GENERIC_ATOMIC64 if !64BIT
mainmenu "Linux/MIPS Kernel Configuration"
select SYS_SUPPORTS_SMP
select SMP_UP
help
- This is a kernel model which is also known a VSMP or lately
- has been marketesed into SMVP.
+ This is a kernel model which is known a VSMP but lately has been
+ marketesed into SMVP.
+ Virtual SMP uses the processor's VPEs to implement virtual
+ processors. In currently available configuration of the 34K processor
+ this allows for a dual processor. Both processors will share the same
+ primary caches; each will obtain the half of the TLB for it's own
+ exclusive use. For a layman this model can be described as similar to
+ what Intel calls Hyperthreading.
+
+ For further information see http://www.linux-mips.org/wiki/34K#VSMP
config MIPS_MT_SMTC
bool "SMTC: Use all TCs on all VPEs for SMP"
help
This is a kernel model which is known a SMTC or lately has been
marketesed into SMVP.
+ is presenting the available TC's of the core as processors to Linux.
+ On currently available 34K processors this means a Linux system will
+ see up to 5 processors. The implementation of the SMTC kernel differs
+ significantly from VSMP and cannot efficiently coexist in the same
+ kernel binary so the choice between VSMP and SMTC is a compile time
+ decision.
+
+ For further information see http://www.linux-mips.org/wiki/34K#SMTC
endchoice
char **prom_argv;
char **prom_envp;
-void prom_init_cmdline(void)
+void __init prom_init_cmdline(void)
{
int i;
}
}
-int prom_get_ethernet_addr(char *ethernet_addr)
+int __init prom_get_ethernet_addr(char *ethernet_addr)
{
char *ethaddr_str;
return 0;
}
-EXPORT_SYMBOL(prom_get_ethernet_addr);
void __init prom_free_prom_memory(void)
{
hostprogs-y := calc_vmlinuz_load_addr
VMLINUZ_LOAD_ADDRESS = $(shell $(obj)/calc_vmlinuz_load_addr \
- $(objtree)/$(KBUILD_IMAGE) $(VMLINUX_LOAD_ADDRESS))
+ $(obj)/vmlinux.bin $(VMLINUX_LOAD_ADDRESS))
vmlinuzobjs-y += $(obj)/piggy.o
def_bool y
select SPARSEMEM_STATIC
depends on CPU_CAVIUM_OCTEON
+
+config CAVIUM_OCTEON_HELPER
+ def_bool y
+ depends on OCTEON_ETHERNET || PCI
return NOTIFY_OK; /* Let default notifier send signals */
}
-static int cnmips_cu2_setup(void)
+static int __init cnmips_cu2_setup(void)
{
return cu2_notifier(cnmips_cu2_call, 0);
}
obj-y += cvmx-bootmem.o cvmx-l2c.o cvmx-sysinfo.o octeon-model.o
-obj-$(CONFIG_PCI) += cvmx-helper-errata.o cvmx-helper-jtag.o
+obj-$(CONFIG_CAVIUM_OCTEON_HELPER) += cvmx-helper-errata.o cvmx-helper-jtag.o
*/
#define atomic64_add_negative(i, v) (atomic64_add_return(i, (v)) < 0)
+#else /* !CONFIG_64BIT */
+
+#include <asm-generic/atomic64.h>
+
#endif /* CONFIG_64BIT */
/*
#define cu2_notifier(fn, pri) \
({ \
- static struct notifier_block fn##_nb __cpuinitdata = { \
+ static struct notifier_block fn##_nb = { \
.notifier_call = fn, \
.priority = pri \
}; \
*/
struct gic_intr_map {
unsigned int cpunum; /* Directed to this CPU */
+#define GIC_UNUSED 0xdead /* Dummy data */
unsigned int pin; /* Directed to this Pin */
unsigned int polarity; /* Polarity : +/- */
unsigned int trigtype; /* Trigger : Edge/Levl */
#ifndef __ASM_MACH_TX49XX_KMALLOC_H
#define __ASM_MACH_TX49XX_KMALLOC_H
-#define ARCH_KMALLOC_MINALIGN L1_CACHE_BYTES
+#define ARCH_DMA_MINALIGN L1_CACHE_BYTES
#endif /* __ASM_MACH_TX49XX_KMALLOC_H */
#define GIC_EXT_INTR(x) x
-/* Dummy data */
-#define X 0xdead
-
/* External Interrupts used for IPI */
#define GIC_IPI_EXT_INTR_RESCHED_VPE0 16
#define GIC_IPI_EXT_INTR_CALLFNC_VPE0 17
((unsigned long)(x) - PAGE_OFFSET + PHYS_OFFSET)
#endif
#define __va(x) ((void *)((unsigned long)(x) + PAGE_OFFSET - PHYS_OFFSET))
+
+/*
+ * RELOC_HIDE was originally added by 6007b903dfe5f1d13e0c711ac2894bdd4a61b1ad
+ * (lmo) rsp. 8431fd094d625b94d364fe393076ccef88e6ce18 (kernel.org). The
+ * discussion can be found in lkml posting
+ * <a2ebde260608230500o3407b108hc03debb9da6e62c@mail.gmail.com> which is
+ * archived at http://lists.linuxcoding.com/kernel/2006-q3/msg17360.html
+ *
+ * It is unclear if the misscompilations mentioned in
+ * http://lkml.org/lkml/2010/8/8/138 also affect MIPS so we keep this one
+ * until GCC 3.x has been retired before we can apply
+ * https://patchwork.linux-mips.org/patch/1541/
+ */
+
#define __pa_symbol(x) __pa(RELOC_HIDE((unsigned long)(x), 0))
#define pfn_to_kaddr(pfn) __va((pfn) << PAGE_SHIFT)
#define _TIF_LOAD_WATCH (1<<TIF_LOAD_WATCH)
/* work to do on interrupt/exception return */
-#define _TIF_WORK_MASK (0x0000ffef & ~_TIF_SECCOMP)
+#define _TIF_WORK_MASK (0x0000ffef & \
+ ~(_TIF_SECCOMP | _TIF_SYSCALL_AUDIT))
/* work to do on any return to u-space */
#define _TIF_ALLWORK_MASK (0x8000ffff & ~_TIF_SECCOMP)
#define __NR_perf_event_open (__NR_Linux + 333)
#define __NR_accept4 (__NR_Linux + 334)
#define __NR_recvmmsg (__NR_Linux + 335)
+#define __NR_fanotify_init (__NR_Linux + 336)
+#define __NR_fanotify_mark (__NR_Linux + 337)
+#define __NR_prlimit64 (__NR_Linux + 338)
/*
* Offset of the last Linux o32 flavoured syscall
*/
-#define __NR_Linux_syscalls 335
+#define __NR_Linux_syscalls 338
#endif /* _MIPS_SIM == _MIPS_SIM_ABI32 */
#define __NR_O32_Linux 4000
-#define __NR_O32_Linux_syscalls 335
+#define __NR_O32_Linux_syscalls 338
#if _MIPS_SIM == _MIPS_SIM_ABI64
#define __NR_perf_event_open (__NR_Linux + 292)
#define __NR_accept4 (__NR_Linux + 293)
#define __NR_recvmmsg (__NR_Linux + 294)
+#define __NR_fanotify_init (__NR_Linux + 295)
+#define __NR_fanotify_mark (__NR_Linux + 296)
+#define __NR_prlimit64 (__NR_Linux + 297)
/*
* Offset of the last Linux 64-bit flavoured syscall
*/
-#define __NR_Linux_syscalls 294
+#define __NR_Linux_syscalls 297
#endif /* _MIPS_SIM == _MIPS_SIM_ABI64 */
#define __NR_64_Linux 5000
-#define __NR_64_Linux_syscalls 294
+#define __NR_64_Linux_syscalls 297
#if _MIPS_SIM == _MIPS_SIM_NABI32
#define __NR_accept4 (__NR_Linux + 297)
#define __NR_recvmmsg (__NR_Linux + 298)
#define __NR_getdents64 (__NR_Linux + 299)
+#define __NR_fanotify_init (__NR_Linux + 300)
+#define __NR_fanotify_mark (__NR_Linux + 301)
+#define __NR_prlimit64 (__NR_Linux + 302)
/*
* Offset of the last N32 flavoured syscall
*/
-#define __NR_Linux_syscalls 299
+#define __NR_Linux_syscalls 302
#endif /* _MIPS_SIM == _MIPS_SIM_NABI32 */
#define __NR_N32_Linux 6000
-#define __NR_N32_Linux_syscalls 299
+#define __NR_N32_Linux_syscalls 302
#ifdef __KERNEL__
#include <asm/io.h>
#include <asm/gic.h>
#include <asm/gcmpregs.h>
-#include <asm/mips-boards/maltaint.h>
#include <asm/irq.h>
#include <linux/hardirq.h>
#include <asm-generic/bitops/find.h>
int i;
irq -= _irqbase;
- pr_debug(KERN_DEBUG "%s(%d) called\n", __func__, irq);
+ pr_debug("%s(%d) called\n", __func__, irq);
cpumask_and(&tmp, cpumask, cpu_online_mask);
if (cpus_empty(tmp))
return -1;
/* Setup specifics */
for (i = 0; i < mapsize; i++) {
cpu = intrmap[i].cpunum;
- if (cpu == X)
+ if (cpu == GIC_UNUSED)
continue;
if (cpu == 0 && i != 0 && intrmap[i].flags == 0)
continue;
struct pt_regs *regs = args->regs;
int trap = (regs->cp0_cause & 0x7c) >> 2;
- /* Userpace events, ignore. */
+ /* Userspace events, ignore. */
if (user_mode(regs))
return NOTIFY_DONE;
memset(&tz, 0, sizeof(tz));
if ((ret.retval = sp_syscall(__NR_gettimeofday, (int)&tv,
(int)&tz, 0, 0)) == 0)
- ret.retval = tv.tv_sec;
+ ret.retval = tv.tv_sec;
break;
case MTSP_SYSCALL_EXIT:
{
return sys_lookup_dcookie(merge_64(a0, a1), buf, len);
}
+
+SYSCALL_DEFINE6(32_fanotify_mark, int, fanotify_fd, unsigned int, flags,
+ u64, a3, u64, a4, int, dfd, const char __user *, pathname)
+{
+ return sys_fanotify_mark(fanotify_fd, flags, merge_64(a3, a4),
+ dfd, pathname);
+}
sys sys_rt_tgsigqueueinfo 4
sys sys_perf_event_open 5
sys sys_accept4 4
- sys sys_recvmmsg 5
+ sys sys_recvmmsg 5 /* 4335 */
+ sys sys_fanotify_init 2
+ sys sys_fanotify_mark 6
+ sys sys_prlimit64 4
.endm
/* We pre-compute the number of _instruction_ bytes needed to
PTR sys_pipe2
PTR sys_inotify_init1
PTR sys_preadv
- PTR sys_pwritev /* 5390 */
+ PTR sys_pwritev /* 5290 */
PTR sys_rt_tgsigqueueinfo
PTR sys_perf_event_open
PTR sys_accept4
- PTR sys_recvmmsg
+ PTR sys_recvmmsg
+ PTR sys_fanotify_init /* 5295 */
+ PTR sys_fanotify_mark
+ PTR sys_prlimit64
.size sys_call_table,.-sys_call_table
PTR sys_perf_event_open
PTR sys_accept4
PTR compat_sys_recvmmsg
- PTR sys_getdents
+ PTR sys_getdents64
+ PTR sys_fanotify_init /* 6300 */
+ PTR sys_fanotify_mark
+ PTR sys_prlimit64
.size sysn32_call_table,.-sysn32_call_table
PTR compat_sys_rt_tgsigqueueinfo
PTR sys_perf_event_open
PTR sys_accept4
- PTR compat_sys_recvmmsg
+ PTR compat_sys_recvmmsg /* 4335 */
+ PTR sys_fanotify_init
+ PTR sys_32_fanotify_mark
+ PTR sys_prlimit64
.size sys_call_table,.-sys_call_table
static gfp_t massage_gfp_flags(const struct device *dev, gfp_t gfp)
{
+ gfp_t dma_flag;
+
/* ignore region specifiers */
gfp &= ~(__GFP_DMA | __GFP_DMA32 | __GFP_HIGHMEM);
-#ifdef CONFIG_ZONE_DMA
+#ifdef CONFIG_ISA
if (dev == NULL)
- gfp |= __GFP_DMA;
- else if (dev->coherent_dma_mask < DMA_BIT_MASK(24))
- gfp |= __GFP_DMA;
+ dma_flag = __GFP_DMA;
else
#endif
-#ifdef CONFIG_ZONE_DMA32
+#if defined(CONFIG_ZONE_DMA32) && defined(CONFIG_ZONE_DMA)
if (dev->coherent_dma_mask < DMA_BIT_MASK(32))
- gfp |= __GFP_DMA32;
+ dma_flag = __GFP_DMA;
+ else if (dev->coherent_dma_mask < DMA_BIT_MASK(64))
+ dma_flag = __GFP_DMA32;
+ else
+#endif
+#if defined(CONFIG_ZONE_DMA32) && !defined(CONFIG_ZONE_DMA)
+ if (dev->coherent_dma_mask < DMA_BIT_MASK(64))
+ dma_flag = __GFP_DMA32;
+ else
+#endif
+#if defined(CONFIG_ZONE_DMA) && !defined(CONFIG_ZONE_DMA32)
+ if (dev->coherent_dma_mask < DMA_BIT_MASK(64))
+ dma_flag = __GFP_DMA;
else
#endif
- ;
+ dma_flag = 0;
/* Don't invoke OOM killer */
gfp |= __GFP_NORETRY;
- return gfp;
+ return gfp | dma_flag;
}
void *dma_alloc_noncoherent(struct device *dev, size_t size,
#define tc_lsize 32
extern unsigned long icache_way_size, dcache_way_size;
-unsigned long tcache_size;
+static unsigned long tcache_size;
#include <asm/r4kcache.h>
*/
#define GIC_CPU_NMI GIC_MAP_TO_NMI_MSK
+#define X GIC_UNUSED
+
static struct gic_intr_map gic_intr_map[GIC_NUM_INTRS] = {
{ X, X, X, X, 0 },
{ X, X, X, X, 0 },
{ X, X, X, X, 0 },
/* The remainder of this table is initialised by fill_ipi_map */
};
+#undef X
/*
* GCMP needs to be detected before any SMP initialisation
if (!((pcicvalue == PCIM_H_EA) ||
(pcicvalue == PCIM_H_IA_FIX) ||
(pcicvalue == PCIM_H_IA_RR))) {
- pr_err(KERN_ERR "PCI init error!!!\n");
+ pr_err("PCI init error!!!\n");
/* Not in Host Mode, return ERROR */
return -1;
}
*/
#include <linux/kernel.h>
+#include <asm/processor.h>
#include <asm/reboot.h>
#include <glb.h>
void pnx8550_machine_restart(char *command)
{
- char head[] = "************* Machine restart *************";
- char foot[] = "*******************************************";
-
- printk("\n\n");
- printk("%s\n", head);
- if (command != NULL)
- printk("* %s\n", command);
- printk("%s\n", foot);
-
PNX8550_RST_CTL = PNX8550_RST_DO_SW_RST;
}
void pnx8550_machine_halt(void)
{
- printk("*** Machine halt. (Not implemented) ***\n");
-}
-
-void pnx8550_machine_power_off(void)
-{
- printk("*** Machine power off. (Not implemented) ***\n");
+ while (1) {
+ if (cpu_wait)
+ cpu_wait();
+ }
}
extern void __init board_setup(void);
extern void pnx8550_machine_restart(char *);
extern void pnx8550_machine_halt(void);
-extern void pnx8550_machine_power_off(void);
extern struct resource ioport_resource;
extern struct resource iomem_resource;
extern char *prom_getcmdline(void);
_machine_restart = pnx8550_machine_restart;
_machine_halt = pnx8550_machine_halt;
- pm_power_off = pnx8550_machine_power_off;
+ pm_power_off = pnx8550_machine_halt;
/* Clear the Global 2 Register, PCI Inta Output Enable Registers
Bit 1:Enable DAC Powerdown
__init void xen_hvm_init_time_ops(void)
{
/* vector callback is needed otherwise we cannot receive interrupts
- * on cpu > 0 */
- if (!xen_have_vector_callback && num_present_cpus() > 1)
+ * on cpu > 0 and at this point we don't know how many cpus are
+ * available */
+ if (!xen_have_vector_callback)
return;
if (!xen_feature(XENFEAT_hvm_safe_pvclock)) {
printk(KERN_INFO "Xen doesn't support pvclock on HVM,"
dev_dbg(&ofdev->dev, "hw routines for %s registered.\n",
cpm->adap.name);
+ /*
+ * register OF I2C devices
+ */
+ of_i2c_register_devices(&cpm->adap);
+
return 0;
out_shut:
cpm_i2c_shutdown(cpm);
dev_info(&ofdev->dev, "using %s mode\n",
dev->fast_mode ? "fast (400 kHz)" : "standard (100 kHz)");
+ /* Now register all the child nodes */
+ of_i2c_register_devices(adap);
+
return 0;
error_cleanup:
dev_err(i2c->dev, "failed to add adapter\n");
goto fail_add;
}
+ of_i2c_register_devices(&i2c->adap);
return result;
static int pca_isa_waitforcompletion(void *pd)
{
- long ret = ~0;
unsigned long timeout;
+ long ret;
if (irq > -1) {
ret = wait_event_timeout(pca_wait,
} else {
/* Do polling */
timeout = jiffies + pca_isa_ops.timeout;
- while (((pca_isa_readbyte(pd, I2C_PCA_CON)
- & I2C_PCA_CON_SI) == 0)
- && (ret = time_before(jiffies, timeout)))
+ do {
+ ret = time_before(jiffies, timeout);
+ if (pca_isa_readbyte(pd, I2C_PCA_CON)
+ & I2C_PCA_CON_SI)
+ break;
udelay(100);
+ } while (ret);
}
+
return ret > 0;
}
static int i2c_pca_pf_waitforcompletion(void *pd)
{
struct i2c_pca_pf_data *i2c = pd;
- long ret = ~0;
unsigned long timeout;
+ long ret;
if (i2c->irq) {
ret = wait_event_timeout(i2c->wait,
} else {
/* Do polling */
timeout = jiffies + i2c->adap.timeout;
- while (((i2c->algo_data.read_byte(i2c, I2C_PCA_CON)
- & I2C_PCA_CON_SI) == 0)
- && (ret = time_before(jiffies, timeout)))
+ do {
+ ret = time_before(jiffies, timeout);
+ if (i2c->algo_data.read_byte(i2c, I2C_PCA_CON)
+ & I2C_PCA_CON_SI)
+ break;
udelay(100);
+ } while (ret);
}
return ret > 0;
#include <linux/init.h>
#include <linux/idr.h>
#include <linux/mutex.h>
-#include <linux/of_i2c.h>
#include <linux/of_device.h>
#include <linux/completion.h>
#include <linux/hardirq.h>
{
const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
- if (pm_runtime_suspended(dev))
- return 0;
-
- if (pm)
- return pm->suspend ? pm->suspend(dev) : 0;
+ if (pm) {
+ if (pm_runtime_suspended(dev))
+ return 0;
+ else
+ return pm->suspend ? pm->suspend(dev) : 0;
+ }
return i2c_legacy_suspend(dev, PMSG_SUSPEND);
}
else
ret = i2c_legacy_resume(dev);
- if (!ret) {
- pm_runtime_disable(dev);
- pm_runtime_set_active(dev);
- pm_runtime_enable(dev);
- }
-
return ret;
}
{
const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
- if (pm_runtime_suspended(dev))
- return 0;
-
- if (pm)
- return pm->freeze ? pm->freeze(dev) : 0;
+ if (pm) {
+ if (pm_runtime_suspended(dev))
+ return 0;
+ else
+ return pm->freeze ? pm->freeze(dev) : 0;
+ }
return i2c_legacy_suspend(dev, PMSG_FREEZE);
}
{
const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
- if (pm_runtime_suspended(dev))
- return 0;
-
- if (pm)
- return pm->thaw ? pm->thaw(dev) : 0;
+ if (pm) {
+ if (pm_runtime_suspended(dev))
+ return 0;
+ else
+ return pm->thaw ? pm->thaw(dev) : 0;
+ }
return i2c_legacy_resume(dev);
}
{
const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
- if (pm_runtime_suspended(dev))
- return 0;
-
- if (pm)
- return pm->poweroff ? pm->poweroff(dev) : 0;
+ if (pm) {
+ if (pm_runtime_suspended(dev))
+ return 0;
+ else
+ return pm->poweroff ? pm->poweroff(dev) : 0;
+ }
return i2c_legacy_suspend(dev, PMSG_HIBERNATE);
}
if (adap->nr < __i2c_first_dynamic_bus_num)
i2c_scan_static_board_info(adap);
- /* Register devices from the device tree */
- of_i2c_register_devices(adap);
-
/* Notify drivers */
mutex_lock(&core_lock);
bus_for_each_drv(&i2c_bus_type, NULL, adap, __process_new_adapter);
* a keyup event might follow immediately after the keydown.
*/
spin_lock_irqsave(&ir->keylock, flags);
- if (time_is_after_eq_jiffies(ir->keyup_jiffies))
+ if (time_is_before_eq_jiffies(ir->keyup_jiffies))
ir_keyup(ir);
spin_unlock_irqrestore(&ir->keylock, flags);
}
(ir_dev->props && ir_dev->props->driver_type == RC_DRIVER_IR_RAW) ?
" in raw mode" : "");
+ /*
+ * Default delay of 250ms is too short for some protocols, expecially
+ * since the timeout is currently set to 250ms. Increase it to 500ms,
+ * to avoid wrong repetition of the keycodes.
+ */
+ input_dev->rep[REP_DELAY] = 500;
+
return 0;
out_event:
features |= LIRC_CAN_SET_SEND_CARRIER;
if (ir_dev->props->s_tx_duty_cycle)
- features |= LIRC_CAN_SET_REC_DUTY_CYCLE;
+ features |= LIRC_CAN_SET_SEND_DUTY_CYCLE;
}
if (ir_dev->props->s_rx_carrier_range)
"rc%u", (unsigned int)ir->devno);
if (IS_ERR(ir->raw->thread)) {
+ int ret = PTR_ERR(ir->raw->thread);
+
kfree(ir->raw);
ir->raw = NULL;
- return PTR_ERR(ir->raw->thread);
+ return ret;
}
mutex_lock(&ir_raw_handler_lock);
char *tmp = buf;
int i;
- if (ir_dev->props->driver_type == RC_DRIVER_SCANCODE) {
+ if (ir_dev->props && ir_dev->props->driver_type == RC_DRIVER_SCANCODE) {
enabled = ir_dev->rc_tab.ir_type;
allowed = ir_dev->props->allowed_protos;
- } else {
+ } else if (ir_dev->raw) {
enabled = ir_dev->raw->enabled_protocols;
allowed = ir_raw_get_allowed_protocols();
- }
+ } else
+ return sprintf(tmp, "[builtin]\n");
IR_dprintk(1, "allowed - 0x%llx, enabled - 0x%llx\n",
(long long)allowed,
int rc, i, count = 0;
unsigned long flags;
- if (ir_dev->props->driver_type == RC_DRIVER_SCANCODE)
+ if (ir_dev->props && ir_dev->props->driver_type == RC_DRIVER_SCANCODE)
type = ir_dev->rc_tab.ir_type;
- else
+ else if (ir_dev->raw)
type = ir_dev->raw->enabled_protocols;
+ else {
+ IR_dprintk(1, "Protocol switching not supported\n");
+ return -EINVAL;
+ }
while ((tmp = strsep((char **) &data, " \n")) != NULL) {
if (!*tmp)
}
}
- if (ir_dev->props->driver_type == RC_DRIVER_SCANCODE) {
+ if (ir_dev->props && ir_dev->props->driver_type == RC_DRIVER_SCANCODE) {
spin_lock_irqsave(&ir_dev->rc_tab.lock, flags);
ir_dev->rc_tab.ir_type = type;
spin_unlock_irqrestore(&ir_dev->rc_tab.lock, flags);
{ 0x800f0416, KEY_PLAY },
{ 0x800f0418, KEY_PAUSE },
+ { 0x800f046e, KEY_PLAYPAUSE },
{ 0x800f0419, KEY_STOP },
{ 0x800f0417, KEY_RECORD },
{ 0x800f0411, KEY_VOLUMEDOWN },
{ 0x800f0412, KEY_CHANNELUP },
{ 0x800f0413, KEY_CHANNELDOWN },
+ { 0x800f043a, KEY_BRIGHTNESSUP },
+ { 0x800f0480, KEY_BRIGHTNESSDOWN },
{ 0x800f0401, KEY_NUMERIC_1 },
{ 0x800f0402, KEY_NUMERIC_2 },
{ USB_DEVICE(VENDOR_PHILIPS, 0x0613) },
/* Philips eHome Infrared Transceiver */
{ USB_DEVICE(VENDOR_PHILIPS, 0x0815) },
+ /* Philips/Spinel plus IR transceiver for ASUS */
+ { USB_DEVICE(VENDOR_PHILIPS, 0x206c) },
+ /* Philips/Spinel plus IR transceiver for ASUS */
+ { USB_DEVICE(VENDOR_PHILIPS, 0x2088) },
/* Realtek MCE IR Receiver */
{ USB_DEVICE(VENDOR_REALTEK, 0x0161) },
/* SMK/Toshiba G83C0004D410 */
else
dev->props.rc.core.bulk_mode = false;
- /* Need a higher delay, to avoid wrong repeat */
- dev->rc_input_dev->rep[REP_DELAY] = 500;
-
dib0700_rc_setup(dev);
return 0;
return adap->fe == NULL ? -ENODEV : 0;
}
+/* STK7770P */
+static struct dib7000p_config dib7770p_dib7000p_config = {
+ .output_mpeg2_in_188_bytes = 1,
+
+ .agc_config_count = 1,
+ .agc = &dib7070_agc_config,
+ .bw = &dib7070_bw_config_12_mhz,
+ .tuner_is_baseband = 1,
+ .spur_protect = 1,
+
+ .gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS,
+ .gpio_val = DIB7000P_GPIO_DEFAULT_VALUES,
+ .gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS,
+
+ .hostbus_diversity = 1,
+ .enable_current_mirror = 1,
+ .disable_sample_and_hold = 0,
+};
+
+static int stk7770p_frontend_attach(struct dvb_usb_adapter *adap)
+{
+ struct usb_device_descriptor *p = &adap->dev->udev->descriptor;
+ if (p->idVendor == cpu_to_le16(USB_VID_PINNACLE) &&
+ p->idProduct == cpu_to_le16(USB_PID_PINNACLE_PCTV72E))
+ dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0);
+ else
+ dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
+ msleep(10);
+ dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
+ dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
+ dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
+ dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
+
+ dib0700_ctrl_clock(adap->dev, 72, 1);
+
+ msleep(10);
+ dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
+ msleep(10);
+ dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
+
+ if (dib7000p_i2c_enumeration(&adap->dev->i2c_adap, 1, 18,
+ &dib7770p_dib7000p_config) != 0) {
+ err("%s: dib7000p_i2c_enumeration failed. Cannot continue\n",
+ __func__);
+ return -ENODEV;
+ }
+
+ adap->fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap, 0x80,
+ &dib7770p_dib7000p_config);
+ return adap->fe == NULL ? -ENODEV : 0;
+}
+
/* DIB807x generic */
static struct dibx000_agc_config dib807x_agc_config[2] = {
{
/* 60 */{ USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_T_XXS_2) },
{ USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_STK807XPVR) },
{ USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_STK807XP) },
- { USB_DEVICE(USB_VID_PIXELVIEW, USB_PID_PIXELVIEW_SBTVD) },
+ { USB_DEVICE_VER(USB_VID_PIXELVIEW, USB_PID_PIXELVIEW_SBTVD, 0x000, 0x3f00) },
{ USB_DEVICE(USB_VID_EVOLUTEPC, USB_PID_TVWAY_PLUS) },
/* 65 */{ USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV73ESE) },
{ USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV282E) },
.pid_filter_count = 32,
.pid_filter = stk70x0p_pid_filter,
.pid_filter_ctrl = stk70x0p_pid_filter_ctrl,
- .frontend_attach = stk7070p_frontend_attach,
+ .frontend_attach = stk7770p_frontend_attach,
.tuner_attach = dib7770p_tuner_attach,
DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
}
}
kfree(p);
- if (fw) {
- release_firmware(fw);
- }
+ release_firmware(fw);
return ret;
}
// dprintk( "908: %x, 909: %x\n", reg_908, reg_909);
+ reg_909 |= (state->cfg.disable_sample_and_hold & 1) << 4;
+ reg_908 |= (state->cfg.enable_current_mirror & 1) << 7;
+
dib7000p_write_word(state, 908, reg_908);
dib7000p_write_word(state, 909, reg_909);
}
default:
case GUARD_INTERVAL_1_32: value *= 1; break;
}
- state->div_sync_wait = (value * 3) / 2 + 32; // add 50% SFN margin + compensate for one DVSY-fifo TODO
+ if (state->cfg.diversity_delay == 0)
+ state->div_sync_wait = (value * 3) / 2 + 48; // add 50% SFN margin + compensate for one DVSY-fifo
+ else
+ state->div_sync_wait = (value * 3) / 2 + state->cfg.diversity_delay; // add 50% SFN margin + compensate for one DVSY-fifo
/* deactive the possibility of diversity reception if extended interleaver */
state->div_force_off = !1 && ch->u.ofdm.transmission_mode != TRANSMISSION_MODE_8K;
int (*agc_control) (struct dvb_frontend *, u8 before);
u8 output_mode;
+ u8 disable_sample_and_hold : 1;
+
+ u8 enable_current_mirror : 1;
+ u8 diversity_delay;
+
};
#define DEFAULT_DIB7000P_I2C_ADDRESS 18
*
* @return pointer to descriptor on success, NULL on error.
*/
-struct smscore_buffer_t *smscore_getbuffer(struct smscore_device_t *coredev)
+
+struct smscore_buffer_t *get_entry(struct smscore_device_t *coredev)
{
struct smscore_buffer_t *cb = NULL;
unsigned long flags;
- DEFINE_WAIT(wait);
-
spin_lock_irqsave(&coredev->bufferslock, flags);
-
- /* This function must return a valid buffer, since the buffer list is
- * finite, we check that there is an available buffer, if not, we wait
- * until such buffer become available.
- */
-
- prepare_to_wait(&coredev->buffer_mng_waitq, &wait, TASK_INTERRUPTIBLE);
- if (list_empty(&coredev->buffers)) {
- spin_unlock_irqrestore(&coredev->bufferslock, flags);
- schedule();
- spin_lock_irqsave(&coredev->bufferslock, flags);
+ if (!list_empty(&coredev->buffers)) {
+ cb = (struct smscore_buffer_t *) coredev->buffers.next;
+ list_del(&cb->entry);
}
+ spin_unlock_irqrestore(&coredev->bufferslock, flags);
+ return cb;
+}
- finish_wait(&coredev->buffer_mng_waitq, &wait);
-
- cb = (struct smscore_buffer_t *) coredev->buffers.next;
- list_del(&cb->entry);
+struct smscore_buffer_t *smscore_getbuffer(struct smscore_device_t *coredev)
+{
+ struct smscore_buffer_t *cb = NULL;
- spin_unlock_irqrestore(&coredev->bufferslock, flags);
+ wait_event(coredev->buffer_mng_waitq, (cb = get_entry(coredev)));
return cb;
}
radio->registers[POWERCFG] = POWERCFG_ENABLE;
if (si470x_set_register(radio, POWERCFG) < 0) {
retval = -EIO;
- goto err_all;
+ goto err_video;
}
msleep(110);
EXTRA_CFLAGS += -Idrivers/media/common/tuners
EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core
EXTRA_CFLAGS += -Idrivers/media/dvb/frontends
+EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-usb
#include <media/v4l2-chip-ident.h>
#include <media/cx25840.h>
+#include "dvb-usb-ids.h"
#include "xc5000.h"
#include "cx231xx.h"
.driver_info = CX231XX_BOARD_CNXT_RDE_250},
{USB_DEVICE(0x0572, 0x58A1),
.driver_info = CX231XX_BOARD_CNXT_RDU_250},
+ {USB_DEVICE_VER(USB_VID_PIXELVIEW, USB_PID_PIXELVIEW_SBTVD, 0x4000,0x4fff),
+ .driver_info = CX231XX_BOARD_UNKNOWN},
{},
};
dev->board.name, dev->model);
/* set the direction for GPIO pins */
- cx231xx_set_gpio_direction(dev, dev->board.tuner_gpio->bit, 1);
- cx231xx_set_gpio_value(dev, dev->board.tuner_gpio->bit, 1);
- cx231xx_set_gpio_direction(dev, dev->board.tuner_sif_gpio, 1);
+ if (dev->board.tuner_gpio) {
+ cx231xx_set_gpio_direction(dev, dev->board.tuner_gpio->bit, 1);
+ cx231xx_set_gpio_value(dev, dev->board.tuner_gpio->bit, 1);
+ cx231xx_set_gpio_direction(dev, dev->board.tuner_sif_gpio, 1);
- /* request some modules if any required */
+ /* request some modules if any required */
- /* reset the Tuner */
- cx231xx_gpio_set(dev, dev->board.tuner_gpio);
+ /* reset the Tuner */
+ cx231xx_gpio_set(dev, dev->board.tuner_gpio);
+ }
/* set the mode to Analog mode initially */
cx231xx_set_mode(dev, CX231XX_ANALOG_MODE);
state->volume = v4l2_ctrl_new_std(&state->hdl,
&cx25840_audio_ctrl_ops, V4L2_CID_AUDIO_VOLUME,
- 0, 65335, 65535 / 100, default_volume);
+ 0, 65535, 65535 / 100, default_volume);
state->mute = v4l2_ctrl_new_std(&state->hdl,
&cx25840_audio_ctrl_ops, V4L2_CID_AUDIO_MUTE,
0, 1, 1, 0);
config VIDEO_CX88_ALSA
tristate "Conexant 2388x DMA audio support"
- depends on VIDEO_CX88 && SND && EXPERIMENTAL
+ depends on VIDEO_CX88 && SND
select SND_PCM
---help---
This is a video4linux driver for direct (DMA) audio on
usb_rcvintpipe(dev, ep->bEndpointAddress),
buffer, buffer_len,
int_irq, (void *)gspca_dev, interval);
+ urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
gspca_dev->int_urb = urb;
ret = usb_submit_urb(urb, GFP_KERNEL);
if (ret < 0) {
(data[33] << 10);
avg_lum >>= 9;
atomic_set(&sd->avg_lum, avg_lum);
- gspca_frame_add(gspca_dev, LAST_PACKET,
- data, len);
+ gspca_frame_add(gspca_dev, LAST_PACKET, NULL, 0);
return;
}
if (gspca_dev->last_packet_type == LAST_PACKET) {
struct fb_vblank vblank;
u32 trace;
+ memset(&vblank, 0, sizeof(struct fb_vblank));
+
vblank.flags = FB_VBLANK_HAVE_COUNT |FB_VBLANK_HAVE_VCOUNT |
FB_VBLANK_HAVE_VSYNC;
trace = read_reg(IVTV_REG_DEC_LINE_FIELD) >> 16;
return -EFAULT;
}
- if (in_buf->vb.size < out_buf->vb.size) {
+ if (in_buf->vb.size > out_buf->vb.size) {
v4l2_err(&dev->v4l2_dev, "Output buffer is too small\n");
return -EINVAL;
}
v4l2_m2m_release(dev->m2m_dev);
del_timer_sync(&dev->timer);
video_unregister_device(dev->vfd);
+ video_device_release(dev->vfd);
v4l2_device_unregister(&dev->v4l2_dev);
kfree(dev);
dev_dbg(&client->dev, "%s left=%d, top=%d, width=%d, height=%d\n",
__func__, rect.left, rect.top, rect.width, rect.height);
+ if (a->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+ return -EINVAL;
+
ret = mt9m111_make_rect(client, &rect);
if (!ret)
mt9m111->rect = rect;
static int mt9m111_cropcap(struct v4l2_subdev *sd, struct v4l2_cropcap *a)
{
+ if (a->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+ return -EINVAL;
+
a->bounds.left = MT9M111_MIN_DARK_COLS;
a->bounds.top = MT9M111_MIN_DARK_ROWS;
a->bounds.width = MT9M111_MAX_WIDTH;
a->bounds.height = MT9M111_MAX_HEIGHT;
a->defrect = a->bounds;
- a->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
a->pixelaspect.numerator = 1;
a->pixelaspect.denominator = 1;
mf->width = mt9m111->rect.width;
mf->height = mt9m111->rect.height;
mf->code = mt9m111->fmt->code;
+ mf->colorspace = mt9m111->fmt->colorspace;
mf->field = V4L2_FIELD_NONE;
return 0;
if (mt9v022->model != V4L2_IDENT_MT9V022IX7ATC)
return -EINVAL;
break;
- case 0:
- /* No format change, only geometry */
- break;
default:
return -EINVAL;
}
spin_lock_irqsave(&pcdev->lock, flags);
+ if (*fb_active == NULL)
+ goto out;
+
vb = &(*fb_active)->vb;
dev_dbg(pcdev->dev, "%s (vb=0x%p) 0x%08lx %d\n", __func__,
vb, vb->baddr, vb->bsize);
*fb_active = buf;
+out:
spin_unlock_irqrestore(&pcdev->lock, flags);
}
if (ret >= 0) {
ret = pvr2_ctrl_range_check(cptr,*valptr);
}
- if (maskptr) *maskptr = ~0;
+ *maskptr = ~0;
} else if (cptr->info->type == pvr2_ctl_bool) {
ret = parse_token(ptr,len,valptr,boolNames,
ARRAY_SIZE(boolNames));
} else if (ret == 0) {
*valptr = (*valptr & 1) ? !0 : 0;
}
- if (maskptr) *maskptr = 1;
+ *maskptr = 1;
} else if (cptr->info->type == pvr2_ctl_enum) {
ret = parse_token(
ptr,len,valptr,
if (ret >= 0) {
ret = pvr2_ctrl_range_check(cptr,*valptr);
}
- if (maskptr) *maskptr = ~0;
+ *maskptr = ~0;
} else if (cptr->info->type == pvr2_ctl_bitmask) {
ret = parse_tlist(
ptr,len,maskptr,valptr,
dbg("ctx->out_order_1p= %d", ctx->out_order_1p);
}
+static void fimc_prepare_dma_offset(struct fimc_ctx *ctx, struct fimc_frame *f)
+{
+ struct samsung_fimc_variant *variant = ctx->fimc_dev->variant;
+
+ f->dma_offset.y_h = f->offs_h;
+ if (!variant->pix_hoff)
+ f->dma_offset.y_h *= (f->fmt->depth >> 3);
+
+ f->dma_offset.y_v = f->offs_v;
+
+ f->dma_offset.cb_h = f->offs_h;
+ f->dma_offset.cb_v = f->offs_v;
+
+ f->dma_offset.cr_h = f->offs_h;
+ f->dma_offset.cr_v = f->offs_v;
+
+ if (!variant->pix_hoff) {
+ if (f->fmt->planes_cnt == 3) {
+ f->dma_offset.cb_h >>= 1;
+ f->dma_offset.cr_h >>= 1;
+ }
+ if (f->fmt->color == S5P_FIMC_YCBCR420) {
+ f->dma_offset.cb_v >>= 1;
+ f->dma_offset.cr_v >>= 1;
+ }
+ }
+
+ dbg("in_offset: color= %d, y_h= %d, y_v= %d",
+ f->fmt->color, f->dma_offset.y_h, f->dma_offset.y_v);
+}
+
/**
* fimc_prepare_config - check dimensions, operation and color mode
* and pre-calculate offset and the scaling coefficients.
{
struct fimc_frame *s_frame, *d_frame;
struct fimc_vid_buffer *buf = NULL;
- struct samsung_fimc_variant *variant = ctx->fimc_dev->variant;
int ret = 0;
s_frame = &ctx->s_frame;
swap(d_frame->width, d_frame->height);
}
- /* Prepare the output offset ratios for scaler. */
- d_frame->dma_offset.y_h = d_frame->offs_h;
- if (!variant->pix_hoff)
- d_frame->dma_offset.y_h *= (d_frame->fmt->depth >> 3);
-
- d_frame->dma_offset.y_v = d_frame->offs_v;
-
- d_frame->dma_offset.cb_h = d_frame->offs_h;
- d_frame->dma_offset.cb_v = d_frame->offs_v;
-
- d_frame->dma_offset.cr_h = d_frame->offs_h;
- d_frame->dma_offset.cr_v = d_frame->offs_v;
+ /* Prepare the DMA offset ratios for scaler. */
+ fimc_prepare_dma_offset(ctx, &ctx->s_frame);
+ fimc_prepare_dma_offset(ctx, &ctx->d_frame);
- if (!variant->pix_hoff && d_frame->fmt->planes_cnt == 3) {
- d_frame->dma_offset.cb_h >>= 1;
- d_frame->dma_offset.cb_v >>= 1;
- d_frame->dma_offset.cr_h >>= 1;
- d_frame->dma_offset.cr_v >>= 1;
- }
-
- dbg("out offset: color= %d, y_h= %d, y_v= %d",
- d_frame->fmt->color,
- d_frame->dma_offset.y_h, d_frame->dma_offset.y_v);
-
- /* Prepare the input offset ratios for scaler. */
- s_frame->dma_offset.y_h = s_frame->offs_h;
- if (!variant->pix_hoff)
- s_frame->dma_offset.y_h *= (s_frame->fmt->depth >> 3);
- s_frame->dma_offset.y_v = s_frame->offs_v;
-
- s_frame->dma_offset.cb_h = s_frame->offs_h;
- s_frame->dma_offset.cb_v = s_frame->offs_v;
-
- s_frame->dma_offset.cr_h = s_frame->offs_h;
- s_frame->dma_offset.cr_v = s_frame->offs_v;
-
- if (!variant->pix_hoff && s_frame->fmt->planes_cnt == 3) {
- s_frame->dma_offset.cb_h >>= 1;
- s_frame->dma_offset.cb_v >>= 1;
- s_frame->dma_offset.cr_h >>= 1;
- s_frame->dma_offset.cr_v >>= 1;
- }
-
- dbg("in offset: color= %d, y_h= %d, y_v= %d",
- s_frame->fmt->color, s_frame->dma_offset.y_h,
- s_frame->dma_offset.y_v);
-
- fimc_set_yuv_order(ctx);
-
- /* Check against the scaler ratio. */
if (s_frame->height > (SCALER_MAX_VRATIO * d_frame->height) ||
s_frame->width > (SCALER_MAX_HRATIO * d_frame->width)) {
err("out of scaler range");
return -EINVAL;
}
+ fimc_set_yuv_order(ctx);
}
/* Input DMA mode is not allowed when the scaler is disabled. */
} else {
v4l2_err(&ctx->fimc_dev->m2m.v4l2_dev,
"Wrong buffer/video queue type (%d)\n", f->type);
- return -EINVAL;
+ ret = -EINVAL;
+ goto s_fmt_out;
}
pix = &f->fmt.pix;
}
fimc->work_queue = create_workqueue(dev_name(&fimc->pdev->dev));
- if (!fimc->work_queue)
+ if (!fimc->work_queue) {
+ ret = -ENOMEM;
goto err_irq;
+ }
ret = fimc_register_m2m_device(fimc);
if (ret)
};
static struct samsung_fimc_variant fimc01_variant_s5pv210 = {
+ .pix_hoff = 1,
.has_inp_rot = 1,
.has_out_rot = 1,
.min_inp_pixsize = 16,
};
static struct samsung_fimc_variant fimc2_variant_s5pv210 = {
+ .pix_hoff = 1,
.min_inp_pixsize = 16,
.min_out_pixsize = 32,
},
[SAA7134_BOARD_BEHOLD_COLUMBUS_TVFM] = {
/* Beholder Intl. Ltd. 2008 */
- /*Dmitry Belimov <d.belimov@gmail.com> */
- .name = "Beholder BeholdTV Columbus TVFM",
+ /* Dmitry Belimov <d.belimov@gmail.com> */
+ .name = "Beholder BeholdTV Columbus TV/FM",
.audio_clock = 0x00187de7,
.tuner_type = TUNER_ALPS_TSBE5_PAL,
- .radio_type = UNSET,
- .tuner_addr = ADDR_UNSET,
- .radio_addr = ADDR_UNSET,
+ .radio_type = TUNER_TEA5767,
+ .tuner_addr = 0xc2 >> 1,
+ .radio_addr = 0xc0 >> 1,
.tda9887_conf = TDA9887_PRESENT,
.gpiomask = 0x000A8004,
.inputs = {{
int saa7164_buffer_dealloc(struct saa7164_tsport *port,
struct saa7164_buffer *buf)
{
- struct saa7164_dev *dev = port->dev;
+ struct saa7164_dev *dev;
- if ((buf == 0) || (port == 0))
+ if (!buf || !port)
return SAA_ERR_BAD_PARAMETER;
+ dev = port->dev;
dprintk(DBGLVL_BUF, "%s() deallocating buffer @ 0x%p\n", __func__, buf);
max(frame->dwFrameInterval[0],
frame->dwDefaultFrameInterval));
+ if (dev->quirks & UVC_QUIRK_RESTRICT_FRAME_RATE) {
+ frame->bFrameIntervalType = 1;
+ frame->dwFrameInterval[0] =
+ frame->dwDefaultFrameInterval;
+ }
+
uvc_trace(UVC_TRACE_DESCR, "- %ux%u (%u.%u fps)\n",
frame->wWidth, frame->wHeight,
10000000/frame->dwDefaultFrameInterval,
.bInterfaceClass = USB_CLASS_VENDOR_SPEC,
.bInterfaceSubClass = 1,
.bInterfaceProtocol = 0 },
+ /* Chicony CNF7129 (Asus EEE 100HE) */
+ { .match_flags = USB_DEVICE_ID_MATCH_DEVICE
+ | USB_DEVICE_ID_MATCH_INT_INFO,
+ .idVendor = 0x04f2,
+ .idProduct = 0xb071,
+ .bInterfaceClass = USB_CLASS_VIDEO,
+ .bInterfaceSubClass = 1,
+ .bInterfaceProtocol = 0,
+ .driver_info = UVC_QUIRK_RESTRICT_FRAME_RATE },
/* Alcor Micro AU3820 (Future Boy PC USB Webcam) */
{ .match_flags = USB_DEVICE_ID_MATCH_DEVICE
| USB_DEVICE_ID_MATCH_INT_INFO,
.bInterfaceProtocol = 0,
.driver_info = UVC_QUIRK_PROBE_MINMAX
| UVC_QUIRK_PROBE_DEF },
+ /* IMC Networks (Medion Akoya) */
+ { .match_flags = USB_DEVICE_ID_MATCH_DEVICE
+ | USB_DEVICE_ID_MATCH_INT_INFO,
+ .idVendor = 0x13d3,
+ .idProduct = 0x5103,
+ .bInterfaceClass = USB_CLASS_VIDEO,
+ .bInterfaceSubClass = 1,
+ .bInterfaceProtocol = 0,
+ .driver_info = UVC_QUIRK_STREAM_NO_FID },
/* Syntek (HP Spartan) */
{ .match_flags = USB_DEVICE_ID_MATCH_DEVICE
| USB_DEVICE_ID_MATCH_INT_INFO,
#define UVC_QUIRK_IGNORE_SELECTOR_UNIT 0x00000020
#define UVC_QUIRK_FIX_BANDWIDTH 0x00000080
#define UVC_QUIRK_PROBE_DEF 0x00000100
+#define UVC_QUIRK_RESTRICT_FRAME_RATE 0x00000200
/* Format flags */
#define UVC_FMT_FLAG_COMPRESSED 0x00000001
}
/* read() method */
- dma_free_coherent(q->dev, mem->size, mem->vaddr, mem->dma_handle);
- mem->vaddr = NULL;
+ if (mem->vaddr) {
+ dma_free_coherent(q->dev, mem->size, mem->vaddr, mem->dma_handle);
+ mem->vaddr = NULL;
+ }
}
EXPORT_SYMBOL_GPL(videobuf_dma_contig_free);
* must free the memory.
*/
static struct scatterlist *videobuf_pages_to_sg(struct page **pages,
- int nr_pages, int offset)
+ int nr_pages, int offset, size_t size)
{
struct scatterlist *sglist;
int i;
/* DMA to highmem pages might not work */
goto highmem;
sg_set_page(&sglist[0], pages[0], PAGE_SIZE - offset, offset);
+ size -= PAGE_SIZE - offset;
for (i = 1; i < nr_pages; i++) {
if (NULL == pages[i])
goto nopage;
if (PageHighMem(pages[i]))
goto highmem;
- sg_set_page(&sglist[i], pages[i], PAGE_SIZE, 0);
+ sg_set_page(&sglist[i], pages[i], min(PAGE_SIZE, size), 0);
+ size -= min(PAGE_SIZE, size);
}
return sglist;
first = (data & PAGE_MASK) >> PAGE_SHIFT;
last = ((data+size-1) & PAGE_MASK) >> PAGE_SHIFT;
- dma->offset = data & ~PAGE_MASK;
+ dma->offset = data & ~PAGE_MASK;
+ dma->size = size;
dma->nr_pages = last-first+1;
dma->pages = kmalloc(dma->nr_pages * sizeof(struct page *), GFP_KERNEL);
if (NULL == dma->pages)
if (dma->pages) {
dma->sglist = videobuf_pages_to_sg(dma->pages, dma->nr_pages,
- dma->offset);
+ dma->offset, dma->size);
}
if (dma->vaddr) {
dma->sglist = videobuf_vmalloc_to_sg(dma->vaddr,
ddata = i2c_get_clientdata(client);
sysfs_remove_group(&client->dev.kobj, &bh1780_attr_group);
- i2c_set_clientdata(client, NULL);
kfree(ddata);
return 0;
regulator_unregister(chip->rdev);
kfree(chip);
- i2c_set_clientdata(client, NULL);
return 0;
}
struct isl_pmic *pmic = i2c_get_clientdata(i2c);
int i;
- i2c_set_clientdata(i2c, NULL);
-
for (i = 0; i < 3; i++)
regulator_unregister(pmic->rdev[i]);
free_irq(client->irq, client);
out_free:
- i2c_set_clientdata(client, NULL);
kfree(ds3232);
return ret;
}
}
rtc_device_unregister(ds3232->rtc);
- i2c_set_clientdata(client, NULL);
kfree(ds3232);
return 0;
}
config VIDEO_TM6000
tristate "TV Master TM5600/6000/6010 driver"
- depends on VIDEO_DEV && I2C && INPUT && USB && EXPERIMENTAL
+ depends on VIDEO_DEV && I2C && INPUT && IR_CORE && USB && EXPERIMENTAL
select VIDEO_TUNER
select MEDIA_TUNER_XC2028
select MEDIA_TUNER_XC5000
}
struct tm6000_ir_poll_result {
- u8 rc_data[4];
+ u16 rc_data;
};
struct tm6000_IR {
int polling;
struct delayed_work work;
u8 wait:1;
+ u8 key:1;
struct urb *int_urb;
u8 *urb_data;
- u8 key:1;
int (*get_key) (struct tm6000_IR *, struct tm6000_ir_poll_result *);
if (urb->status != 0)
printk(KERN_INFO "not ready\n");
- else if (urb->actual_length > 0)
+ else if (urb->actual_length > 0) {
memcpy(ir->urb_data, urb->transfer_buffer, urb->actual_length);
- dprintk("data %02x %02x %02x %02x\n", ir->urb_data[0],
- ir->urb_data[1], ir->urb_data[2], ir->urb_data[3]);
+ dprintk("data %02x %02x %02x %02x\n", ir->urb_data[0],
+ ir->urb_data[1], ir->urb_data[2], ir->urb_data[3]);
- ir->key = 1;
+ ir->key = 1;
+ }
rc = usb_submit_urb(urb, GFP_ATOMIC);
}
int rc;
u8 buf[2];
- if (ir->wait && !&dev->int_in) {
- poll_result->rc_data[0] = 0xff;
+ if (ir->wait && !&dev->int_in)
return 0;
- }
if (&dev->int_in) {
- poll_result->rc_data[0] = ir->urb_data[0];
- poll_result->rc_data[1] = ir->urb_data[1];
+ if (ir->ir.ir_type == IR_TYPE_RC5)
+ poll_result->rc_data = ir->urb_data[0];
+ else
+ poll_result->rc_data = ir->urb_data[0] | ir->urb_data[1] << 8;
} else {
tm6000_set_reg(dev, REQ_04_EN_DISABLE_MCU_INT, 2, 0);
msleep(10);
tm6000_set_reg(dev, REQ_04_EN_DISABLE_MCU_INT, 2, 1);
msleep(10);
- rc = tm6000_read_write_usb(dev, USB_DIR_IN | USB_TYPE_VENDOR |
- USB_RECIP_DEVICE, REQ_02_GET_IR_CODE, 0, 0, buf, 1);
+ if (ir->ir.ir_type == IR_TYPE_RC5) {
+ rc = tm6000_read_write_usb(dev, USB_DIR_IN |
+ USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+ REQ_02_GET_IR_CODE, 0, 0, buf, 1);
- msleep(10);
+ msleep(10);
- dprintk("read data=%02x\n", buf[0]);
- if (rc < 0)
- return rc;
+ dprintk("read data=%02x\n", buf[0]);
+ if (rc < 0)
+ return rc;
- poll_result->rc_data[0] = buf[0];
+ poll_result->rc_data = buf[0];
+ } else {
+ rc = tm6000_read_write_usb(dev, USB_DIR_IN |
+ USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+ REQ_02_GET_IR_CODE, 0, 0, buf, 2);
+
+ msleep(10);
+
+ dprintk("read data=%04x\n", buf[0] | buf[1] << 8);
+ if (rc < 0)
+ return rc;
+
+ poll_result->rc_data = buf[0] | buf[1] << 8;
+ }
+ if ((poll_result->rc_data & 0x00ff) != 0xff)
+ ir->key = 1;
}
return 0;
}
return;
}
- dprintk("ir->get_key result data=%02x %02x\n",
- poll_result.rc_data[0], poll_result.rc_data[1]);
+ dprintk("ir->get_key result data=%04x\n", poll_result.rc_data);
- if (poll_result.rc_data[0] != 0xff && ir->key == 1) {
+ if (ir->key) {
ir_input_keydown(ir->input->input_dev, &ir->ir,
- poll_result.rc_data[0] | poll_result.rc_data[1] << 8);
+ (u32)poll_result.rc_data);
ir_input_nokey(ir->input->input_dev, &ir->ir);
ir->key = 0;
{
int ret = 0;
- blocking_notifier_chain_register(&xenstore_chain, nb);
+ if (xenstored_ready > 0)
+ ret = nb->notifier_call(nb, 0, NULL);
+ else
+ blocking_notifier_chain_register(&xenstore_chain, nb);
return ret;
}
void xenbus_probe(struct work_struct *unused)
{
- BUG_ON((xenstored_ready <= 0));
+ xenstored_ready = 1;
/* Enumerate devices in xenstore and watch for changes. */
xenbus_probe_devices(&xenbus_frontend);
xen_store_evtchn = xen_start_info->store_evtchn;
xen_store_mfn = xen_start_info->store_mfn;
xen_store_interface = mfn_to_virt(xen_store_mfn);
+ xenstored_ready = 1;
}
- xenstored_ready = 1;
}
/* Initialize the interface to xenstore. */
static inline struct backing_dev_info *inode_to_bdi(struct inode *inode)
{
struct super_block *sb = inode->i_sb;
- struct backing_dev_info *bdi = inode->i_mapping->backing_dev_info;
- /*
- * For inodes on standard filesystems, we use superblock's bdi. For
- * inodes on virtual filesystems, we want to use inode mapping's bdi
- * because they can possibly point to something useful (think about
- * block_dev filesystem).
- */
- if (sb->s_bdi && sb->s_bdi != &noop_backing_dev_info) {
- /* Some device inodes could play dirty tricks. Catch them... */
- WARN(bdi != sb->s_bdi && bdi_cap_writeback_dirty(bdi),
- "Dirtiable inode bdi %s != sb bdi %s\n",
- bdi->name, sb->s_bdi->name);
- return sb->s_bdi;
- }
- return bdi;
+ if (strcmp(sb->s_type->name, "bdev") == 0)
+ return inode->i_mapping->backing_dev_info;
+
+ return sb->s_bdi;
}
static void bdi_queue_work(struct backing_dev_info *bdi,
loff_t file_size;
unsigned int num;
unsigned int offset;
- size_t total_len;
+ size_t total_len = 0;
req = fuse_get_req(fc);
if (IS_ERR(req))
/* for userland buffer */
int offset;
+ size_t size;
struct page **pages;
/* for kernel buffers */
kbuf[left] = 0;
}
- for (; left && vleft--; i++, min++, max++, first=0) {
+ for (; left && vleft--; i++, first = 0) {
unsigned long val;
if (write) {
static void mem_cgroup_threshold(struct mem_cgroup *memcg)
{
- __mem_cgroup_threshold(memcg, false);
- if (do_swap_account)
- __mem_cgroup_threshold(memcg, true);
+ while (memcg) {
+ __mem_cgroup_threshold(memcg, false);
+ if (do_swap_account)
+ __mem_cgroup_threshold(memcg, true);
+
+ memcg = parent_mem_cgroup(memcg);
+ }
}
static int compare_thresholds(const void *a, const void *b)
if (!table)
panic("Failed to allocate %s hash table\n", tablename);
- printk(KERN_INFO "%s hash table entries: %d (order: %d, %lu bytes)\n",
+ printk(KERN_INFO "%s hash table entries: %ld (order: %d, %lu bytes)\n",
tablename,
- (1U << log2qty),
+ (1UL << log2qty),
ilog2(size) - PAGE_SHIFT,
size);
git://bbs.cooldavid.org / net-next-2.6.git / commitdiff