ARM: 6297/1: move U300 timer to dynamic clock lookup

This moves the U300 timer code to look up its clock rate from the
clock framework as is apropriate and also switches it over to use
the generic code for *calc_mult_shift() on clock source and clock
event.

Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

diff --git a/arch/arm/mach-u300/clock.c b/arch/arm/mach-u300/clock.c
index 7a94729caff9a87e2576a1b5822b6bb452a70ad1..60acf9e708ae9d655423e46e804f509908642c04 100644 (file)
--- a/arch/arm/mach-u300/clock.c
+++ b/arch/arm/mach-u300/clock.c
@@ -1204,10 +1204,14 @@ static struct clk timer_clk = {
        .lock       = __SPIN_LOCK_UNLOCKED(timer_clk.lock),
 };
 
+/*
+ * There is a binary divider in the hardware that divides
+ * the 13MHz PLL by 13 down to 1 MHz.
+ */
 static struct clk app_timer_clk = {
        .name       = "TIMER_APP",
        .parent     = &slow_clk,
-       .rate       = 13000000,
+       .rate       = 1000000,
        .hw_ctrld   = true,
        .reset      = true,
        .res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RSR,

diff --git a/arch/arm/mach-u300/timer.c b/arch/arm/mach-u300/timer.c
index 01f161831956e9c7dc02445a34845546f17dffdf..3fc4472719be0f05bfeb3823fbe000a7818cf2d5 100644 (file)
--- a/arch/arm/mach-u300/timer.c
+++ b/arch/arm/mach-u300/timer.c
@@ -25,6 +25,8 @@
 #include <asm/mach/time.h>
 #include <asm/mach/irq.h>
 
+/* Be able to sleep for atleast 4 seconds (usually more) */
+#define APPTIMER_MIN_RANGE 4
 
 /*
  * APP side special timer registers
@@ -308,8 +310,6 @@ static struct clock_event_device clockevent_u300_1mhz = {
        .name           = "GPT1",
        .rating         = 300, /* Reasonably fast and accurate clock event */
        .features       = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
-       /* 22 calculated using the algorithm in arch/mips/kernel/time.c */
-       .shift          = 22,
        .set_next_event = u300_set_next_event,
        .set_mode       = u300_set_mode,
 };
@@ -342,8 +342,6 @@ static struct clocksource clocksource_u300_1mhz = {
        .rating         = 300, /* Reasonably fast and accurate clock source */
        .read           = u300_get_cycles,
        .mask           = CLOCKSOURCE_MASK(32), /* 32 bits */
-       /* 22 calculated using the algorithm in arch/mips/kernel/time.c */
-       .shift          = 22,
        .flags          = CLOCK_SOURCE_IS_CONTINUOUS,
 };
 
@@ -369,11 +367,13 @@ unsigned long long notrace sched_clock(void)
 static void __init u300_timer_init(void)
 {
        struct clk *clk;
+       unsigned long rate;
 
        /* Clock the interrupt controller */
        clk = clk_get_sys("apptimer", NULL);
        BUG_ON(IS_ERR(clk));
        clk_enable(clk);
+       rate = clk_get_rate(clk);
 
        /*
         * Disable the "OS" and "DD" timers - these are designed for Symbian!
@@ -412,15 +412,14 @@ static void __init u300_timer_init(void)
        writel(U300_TIMER_APP_EGPT2_TIMER_ENABLE,
                U300_TIMER_APP_VBASE + U300_TIMER_APP_EGPT2);
 
-       /* This is a pure microsecond clock source */
-       clocksource_u300_1mhz.mult =
-               clocksource_khz2mult(1000, clocksource_u300_1mhz.shift);
+       clocksource_calc_mult_shift(&clocksource_u300_1mhz,
+                                   rate, APPTIMER_MIN_RANGE);
        if (clocksource_register(&clocksource_u300_1mhz))
                printk(KERN_ERR "timer: failed to initialize clock "
                       "source %s\n", clocksource_u300_1mhz.name);
 
-       clockevent_u300_1mhz.mult =
-               div_sc(1000000, NSEC_PER_SEC, clockevent_u300_1mhz.shift);
+       clockevents_calc_mult_shift(&clockevent_u300_1mhz,
+                                   rate, APPTIMER_MIN_RANGE);
        /* 32bit counter, so 32bits delta is max */
        clockevent_u300_1mhz.max_delta_ns =
                clockevent_delta2ns(0xffffffff, &clockevent_u300_1mhz);