From 52b02d04c801fff51ca49ad033210846d1713253 Mon Sep 17 00:00:00 2001 From: Matt Carlson Date: Thu, 14 Oct 2010 10:37:41 +0000 Subject: [PATCH] tg3: Add EEE support This patch adds Energy Efficient Ethernet (EEE) support for the 5718 device ID and the 57765 B0 asic revision. Signed-off-by: Matt Carlson Reviewed-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/tg3.c | 114 ++++++++++++++++++++++++++++++++++++++++++++++ drivers/net/tg3.h | 33 +++++++++++++- 2 files changed, 146 insertions(+), 1 deletion(-) diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index afcc593108c..f2d96ddd464 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -1584,6 +1584,17 @@ static void tg3_phy_fini(struct tg3 *tp) } } +static int tg3_phydsp_read(struct tg3 *tp, u32 reg, u32 *val) +{ + int err; + + err = tg3_writephy(tp, MII_TG3_DSP_ADDRESS, reg); + if (!err) + err = tg3_readphy(tp, MII_TG3_DSP_RW_PORT, val); + + return err; +} + static int tg3_phydsp_write(struct tg3 *tp, u32 reg, u32 val) { int err; @@ -1747,6 +1758,42 @@ static void tg3_phy_apply_otp(struct tg3 *tp) tg3_writephy(tp, MII_TG3_AUX_CTRL, phy); } +static void tg3_phy_eee_adjust(struct tg3 *tp, u32 current_link_up) +{ + u32 val; + + if (!(tp->phy_flags & TG3_PHYFLG_EEE_CAP)) + return; + + tp->setlpicnt = 0; + + if (tp->link_config.autoneg == AUTONEG_ENABLE && + current_link_up == 1 && + (tp->link_config.active_speed == SPEED_1000 || + (tp->link_config.active_speed == SPEED_100 && + tp->link_config.active_duplex == DUPLEX_FULL))) { + u32 eeectl; + + if (tp->link_config.active_speed == SPEED_1000) + eeectl = TG3_CPMU_EEE_CTRL_EXIT_16_5_US; + else + eeectl = TG3_CPMU_EEE_CTRL_EXIT_36_US; + + tw32(TG3_CPMU_EEE_CTRL, eeectl); + + tg3_phy_cl45_read(tp, 0x7, TG3_CL45_D7_EEERES_STAT, &val); + + if (val == TG3_CL45_D7_EEERES_STAT_LP_1000T || + val == TG3_CL45_D7_EEERES_STAT_LP_100TX) + tp->setlpicnt = 2; + } + + if (!tp->setlpicnt) { + val = tr32(TG3_CPMU_EEE_MODE); + tw32(TG3_CPMU_EEE_MODE, val & ~TG3_CPMU_EEEMD_LPI_ENABLE); + } +} + static int tg3_wait_macro_done(struct tg3 *tp) { int limit = 100; @@ -2921,6 +2968,44 @@ static void tg3_phy_copper_begin(struct tg3 *tp) tg3_writephy(tp, MII_TG3_CTRL, new_adv); } + if (tp->phy_flags & TG3_PHYFLG_EEE_CAP) { + u32 val = 0; + + tw32(TG3_CPMU_EEE_MODE, + tr32(TG3_CPMU_EEE_MODE) & ~TG3_CPMU_EEEMD_LPI_ENABLE); + + /* Enable SM_DSP clock and tx 6dB coding. */ + val = MII_TG3_AUXCTL_SHDWSEL_AUXCTL | + MII_TG3_AUXCTL_ACTL_SMDSP_ENA | + MII_TG3_AUXCTL_ACTL_TX_6DB; + tg3_writephy(tp, MII_TG3_AUX_CTRL, val); + + if ((GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5717 || + GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57765) && + !tg3_phydsp_read(tp, MII_TG3_DSP_CH34TP2, &val)) + tg3_phydsp_write(tp, MII_TG3_DSP_CH34TP2, + val | MII_TG3_DSP_CH34TP2_HIBW01); + + if (tp->link_config.autoneg == AUTONEG_ENABLE) { + /* Advertise 100-BaseTX EEE ability */ + if (tp->link_config.advertising & + (ADVERTISED_100baseT_Half | + ADVERTISED_100baseT_Full)) + val |= TG3_CL45_D7_EEEADV_CAP_100TX; + /* Advertise 1000-BaseT EEE ability */ + if (tp->link_config.advertising & + (ADVERTISED_1000baseT_Half | + ADVERTISED_1000baseT_Full)) + val |= TG3_CL45_D7_EEEADV_CAP_1000T; + } + tg3_phy_cl45_write(tp, 0x7, TG3_CL45_D7_EEEADV_CAP, val); + + /* Turn off SM_DSP clock. */ + val = MII_TG3_AUXCTL_SHDWSEL_AUXCTL | + MII_TG3_AUXCTL_ACTL_TX_6DB; + tg3_writephy(tp, MII_TG3_AUX_CTRL, val); + } + if (tp->link_config.autoneg == AUTONEG_DISABLE && tp->link_config.speed != SPEED_INVALID) { u32 bmcr, orig_bmcr; @@ -3282,6 +3367,8 @@ relink: tw32_f(MAC_MODE, tp->mac_mode); udelay(40); + tg3_phy_eee_adjust(tp, current_link_up); + if (tp->tg3_flags & TG3_FLAG_USE_LINKCHG_REG) { /* Polled via timer. */ tw32_f(MAC_EVENT, 0); @@ -7790,6 +7877,22 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy) tw32(TG3_CPMU_LSPD_10MB_CLK, val); } + /* Enable MAC control of LPI */ + if (tp->phy_flags & TG3_PHYFLG_EEE_CAP) { + tw32_f(TG3_CPMU_EEE_LNKIDL_CTRL, + TG3_CPMU_EEE_LNKIDL_PCIE_NL0 | + TG3_CPMU_EEE_LNKIDL_UART_IDL); + + tw32_f(TG3_CPMU_EEE_CTRL, + TG3_CPMU_EEE_CTRL_EXIT_20_1_US); + + tw32_f(TG3_CPMU_EEE_MODE, + TG3_CPMU_EEEMD_ERLY_L1_XIT_DET | + TG3_CPMU_EEEMD_LPI_IN_TX | + TG3_CPMU_EEEMD_LPI_IN_RX | + TG3_CPMU_EEEMD_EEE_ENABLE); + } + /* This works around an issue with Athlon chipsets on * B3 tigon3 silicon. This bit has no effect on any * other revision. But do not set this on PCI Express @@ -8598,6 +8701,12 @@ static void tg3_timer(unsigned long __opaque) if (tp->tg3_flags2 & TG3_FLG2_5705_PLUS) tg3_periodic_fetch_stats(tp); + if (tp->setlpicnt && !--tp->setlpicnt) { + u32 val = tr32(TG3_CPMU_EEE_MODE); + tw32(TG3_CPMU_EEE_MODE, + val | TG3_CPMU_EEEMD_LPI_ENABLE); + } + if (tp->tg3_flags & TG3_FLAG_USE_LINKCHG_REG) { u32 mac_stat; int phy_event; @@ -12432,6 +12541,11 @@ static int __devinit tg3_phy_probe(struct tg3 *tp) } } + if (tp->pdev->device == TG3PCI_DEVICE_TIGON3_5718 || + (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57765 && + tp->pci_chip_rev_id != CHIPREV_ID_57765_A0)) + tp->phy_flags |= TG3_PHYFLG_EEE_CAP; + if (!(tp->phy_flags & TG3_PHYFLG_ANY_SERDES) && !(tp->tg3_flags3 & TG3_FLG3_ENABLE_APE) && !(tp->tg3_flags & TG3_FLAG_ENABLE_ASF)) { diff --git a/drivers/net/tg3.h b/drivers/net/tg3.h index 99fc3068021..8342190df0f 100644 --- a/drivers/net/tg3.h +++ b/drivers/net/tg3.h @@ -1091,7 +1091,26 @@ #define CPMU_MUTEX_GNT_DRIVER 0x00001000 #define TG3_CPMU_PHY_STRAP 0x00003664 #define TG3_CPMU_PHY_STRAP_IS_SERDES 0x00000020 -/* 0x3664 --> 0x3800 unused */ +/* 0x3664 --> 0x36b0 unused */ + +#define TG3_CPMU_EEE_MODE 0x000036b0 +#define TG3_CPMU_EEEMD_ERLY_L1_XIT_DET 0x00000008 +#define TG3_CPMU_EEEMD_LPI_ENABLE 0x00000080 +#define TG3_CPMU_EEEMD_LPI_IN_TX 0x00000100 +#define TG3_CPMU_EEEMD_LPI_IN_RX 0x00000200 +#define TG3_CPMU_EEEMD_EEE_ENABLE 0x00100000 +/* 0x36b4 --> 0x36b8 unused */ + +#define TG3_CPMU_EEE_LNKIDL_CTRL 0x000036bc +#define TG3_CPMU_EEE_LNKIDL_PCIE_NL0 0x01000000 +#define TG3_CPMU_EEE_LNKIDL_UART_IDL 0x00000004 +/* 0x36c0 --> 0x36d0 unused */ + +#define TG3_CPMU_EEE_CTRL 0x000036d0 +#define TG3_CPMU_EEE_CTRL_EXIT_16_5_US 0x0000019d +#define TG3_CPMU_EEE_CTRL_EXIT_36_US 0x00000384 +#define TG3_CPMU_EEE_CTRL_EXIT_20_1_US 0x000001f8 +/* 0x36d4 --> 0x3800 unused */ /* Mbuf cluster free registers */ #define MBFREE_MODE 0x00003800 @@ -2082,6 +2101,8 @@ #define MII_TG3_DSP_TAP1 0x0001 #define MII_TG3_DSP_TAP1_AGCTGT_DFLT 0x0007 #define MII_TG3_DSP_AADJ1CH0 0x001f +#define MII_TG3_DSP_CH34TP2 0x4022 +#define MII_TG3_DSP_CH34TP2_HIBW01 0x0010 #define MII_TG3_DSP_AADJ1CH3 0x601f #define MII_TG3_DSP_AADJ1CH3_ADCCKADJ 0x0002 #define MII_TG3_DSP_EXP1_INT_STAT 0x0f01 @@ -2148,6 +2169,14 @@ #define MII_TG3_TEST1_TRIM_EN 0x0010 #define MII_TG3_TEST1_CRC_EN 0x8000 +/* Clause 45 expansion registers */ +#define TG3_CL45_D7_EEEADV_CAP 0x003c +#define TG3_CL45_D7_EEEADV_CAP_100TX 0x0002 +#define TG3_CL45_D7_EEEADV_CAP_1000T 0x0004 +#define TG3_CL45_D7_EEERES_STAT 0x803e +#define TG3_CL45_D7_EEERES_STAT_LP_100TX 0x0002 +#define TG3_CL45_D7_EEERES_STAT_LP_1000T 0x0004 + /* Fast Ethernet Tranceiver definitions */ #define MII_TG3_FET_PTEST 0x17 @@ -2992,9 +3021,11 @@ struct tg3 { #define TG3_PHYFLG_BER_BUG 0x00008000 #define TG3_PHYFLG_SERDES_PREEMPHASIS 0x00010000 #define TG3_PHYFLG_PARALLEL_DETECT 0x00020000 +#define TG3_PHYFLG_EEE_CAP 0x00040000 u32 led_ctrl; u32 phy_otp; + u32 setlpicnt; #define TG3_BPN_SIZE 24 char board_part_number[TG3_BPN_SIZE]; -- 2.39.3