From 50d6c681d0c38208e494f0c6302ef13d21dababa Mon Sep 17 00:00:00 2001 From: Alexander Duyck Date: Tue, 16 Nov 2010 19:27:05 -0800 Subject: [PATCH] ixgbe: add WOL support for backplane adapters This change adds support for certain 82599 based Mezzanine adapters. Signed-off-by: Alexander Duyck Tested-by: Ross Brattain Signed-off-by: Jeff Kirsher --- drivers/net/ixgbe/ixgbe_ethtool.c | 17 +++++++++++++++++ drivers/net/ixgbe/ixgbe_main.c | 7 +++++++ drivers/net/ixgbe/ixgbe_type.h | 1 + 3 files changed, 25 insertions(+) diff --git a/drivers/net/ixgbe/ixgbe_ethtool.c b/drivers/net/ixgbe/ixgbe_ethtool.c index f61a8ce908e..0a4b322fab6 100644 --- a/drivers/net/ixgbe/ixgbe_ethtool.c +++ b/drivers/net/ixgbe/ixgbe_ethtool.c @@ -185,6 +185,16 @@ static int ixgbe_get_settings(struct net_device *netdev, ADVERTISED_FIBRE); ecmd->port = PORT_FIBRE; ecmd->autoneg = AUTONEG_DISABLE; + } else if ((hw->device_id == IXGBE_DEV_ID_82599_COMBO_BACKPLANE) || + (hw->device_id == IXGBE_DEV_ID_82599_KX4_MEZZ)) { + ecmd->supported |= (SUPPORTED_1000baseT_Full | + SUPPORTED_Autoneg | + SUPPORTED_FIBRE); + ecmd->advertising = (ADVERTISED_10000baseT_Full | + ADVERTISED_1000baseT_Full | + ADVERTISED_Autoneg | + ADVERTISED_FIBRE); + ecmd->port = PORT_FIBRE; } else { ecmd->supported |= (SUPPORTED_1000baseT_Full | SUPPORTED_FIBRE); @@ -1862,6 +1872,13 @@ static int ixgbe_wol_exclusion(struct ixgbe_adapter *adapter, int retval = 1; switch(hw->device_id) { + case IXGBE_DEV_ID_82599_COMBO_BACKPLANE: + /* All except this subdevice support WOL */ + if (hw->subsystem_device_id == + IXGBE_SUBDEV_ID_82599_KX4_KR_MEZZ) { + wol->supported = 0; + break; + } case IXGBE_DEV_ID_82599_KX4: retval = 0; break; diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c index 10fff68088e..af4ef29cae1 100644 --- a/drivers/net/ixgbe/ixgbe_main.c +++ b/drivers/net/ixgbe/ixgbe_main.c @@ -7088,6 +7088,13 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev, goto err_sw_init; switch (pdev->device) { + case IXGBE_DEV_ID_82599_COMBO_BACKPLANE: + /* All except this subdevice support WOL */ + if (pdev->subsystem_device == + IXGBE_SUBDEV_ID_82599_KX4_KR_MEZZ) { + adapter->wol = 0; + break; + } case IXGBE_DEV_ID_82599_KX4: adapter->wol = (IXGBE_WUFC_MAG | IXGBE_WUFC_EX | IXGBE_WUFC_MC | IXGBE_WUFC_BC); diff --git a/drivers/net/ixgbe/ixgbe_type.h b/drivers/net/ixgbe/ixgbe_type.h index 96dea7731e6..9e6908dff9b 100644 --- a/drivers/net/ixgbe/ixgbe_type.h +++ b/drivers/net/ixgbe/ixgbe_type.h @@ -57,6 +57,7 @@ #define IXGBE_DEV_ID_82599_SFP_EM 0x1507 #define IXGBE_DEV_ID_82599_XAUI_LOM 0x10FC #define IXGBE_DEV_ID_82599_COMBO_BACKPLANE 0x10F8 +#define IXGBE_SUBDEV_ID_82599_KX4_KR_MEZZ 0x000C /* General Registers */ #define IXGBE_CTRL 0x00000 -- 2.39.3