From 3742e3d794315be8b979d2fd5d6b90c82100df63 Mon Sep 17 00:00:00 2001 From: Tracey Dent Date: Mon, 20 Sep 2010 21:19:42 -0400 Subject: [PATCH] Staging: rtl8187se: r8185b_init: fixed a lot of checkpatch.pl issues Fixed numerous coding style issues using checkpatch.pl Signed-off-by: Tracey Dent Signed-off-by: Greg Kroah-Hartman --- drivers/staging/rtl8187se/r8185b_init.c | 1508 +++++++++++------------ 1 file changed, 716 insertions(+), 792 deletions(-) diff --git a/drivers/staging/rtl8187se/r8185b_init.c b/drivers/staging/rtl8187se/r8185b_init.c index a0ece1fd64a..46000d72f4c 100644 --- a/drivers/staging/rtl8187se/r8185b_init.c +++ b/drivers/staging/rtl8187se/r8185b_init.c @@ -2,14 +2,14 @@ Copyright (c) Realtek Semiconductor Corp. All rights reserved. Module Name: - r8185b_init.c + r8185b_init.c Abstract: - Hardware Initialization and Hardware IO for RTL8185B + Hardware Initialization and Hardware IO for RTL8185B Major Change History: - When Who What - ---------- --------------- ------------------------------- + When Who What + ---------- --------------- ------------------------------- 2006-11-15 Xiong Created Notes: @@ -29,94 +29,94 @@ Notes: #include "ieee80211/dot11d.h" -//#define CONFIG_RTL8180_IO_MAP +/* #define CONFIG_RTL8180_IO_MAP */ #define TC_3W_POLL_MAX_TRY_CNT 5 -static u8 MAC_REG_TABLE[][2]={ - //PAGA 0: - // 0x34(BRSR), 0xBE(RATE_FALLBACK_CTL), 0x1E0(ARFR) would set in HwConfigureRTL8185() - // 0x272(RFSW_CTRL), 0x1CE(AESMSK_QC) set in InitializeAdapter8185(). - // 0x1F0~0x1F8 set in MacConfig_85BASIC() - {0x08, 0xae}, {0x0a, 0x72}, {0x5b, 0x42}, - {0x84, 0x88}, {0x85, 0x24}, {0x88, 0x54}, {0x8b, 0xb8}, {0x8c, 0x03}, - {0x8d, 0x40}, {0x8e, 0x00}, {0x8f, 0x00}, {0x5b, 0x18}, {0x91, 0x03}, - {0x94, 0x0F}, {0x95, 0x32}, - {0x96, 0x00}, {0x97, 0x07}, {0xb4, 0x22}, {0xdb, 0x00}, - {0xf0, 0x32}, {0xf1, 0x32}, {0xf2, 0x00}, {0xf3, 0x00}, {0xf4, 0x32}, - {0xf5, 0x43}, {0xf6, 0x00}, {0xf7, 0x00}, {0xf8, 0x46}, {0xf9, 0xa4}, - {0xfa, 0x00}, {0xfb, 0x00}, {0xfc, 0x96}, {0xfd, 0xa4}, {0xfe, 0x00}, - {0xff, 0x00}, - - //PAGE 1: - // For Flextronics system Logo PCIHCT failure: - // 0x1C4~0x1CD set no-zero value to avoid PCI configuration space 0x45[7]=1 - {0x5e, 0x01}, - {0x58, 0x00}, {0x59, 0x00}, {0x5a, 0x04}, {0x5b, 0x00}, {0x60, 0x24}, - {0x61, 0x97}, {0x62, 0xF0}, {0x63, 0x09}, {0x80, 0x0F}, {0x81, 0xFF}, - {0x82, 0xFF}, {0x83, 0x03}, - {0xC4, 0x22}, {0xC5, 0x22}, {0xC6, 0x22}, {0xC7, 0x22}, {0xC8, 0x22}, //lzm add 080826 - {0xC9, 0x22}, {0xCA, 0x22}, {0xCB, 0x22}, {0xCC, 0x22}, {0xCD, 0x22},//lzm add 080826 - {0xe2, 0x00}, - - - //PAGE 2: - {0x5e, 0x02}, - {0x0c, 0x04}, {0x4c, 0x30}, {0x4d, 0x08}, {0x50, 0x05}, {0x51, 0xf5}, - {0x52, 0x04}, {0x53, 0xa0}, {0x54, 0xff}, {0x55, 0xff}, {0x56, 0xff}, - {0x57, 0xff}, {0x58, 0x08}, {0x59, 0x08}, {0x5a, 0x08}, {0x5b, 0x08}, - {0x60, 0x08}, {0x61, 0x08}, {0x62, 0x08}, {0x63, 0x08}, {0x64, 0x2f}, - {0x8c, 0x3f}, {0x8d, 0x3f}, {0x8e, 0x3f}, - {0x8f, 0x3f}, {0xc4, 0xff}, {0xc5, 0xff}, {0xc6, 0xff}, {0xc7, 0xff}, - {0xc8, 0x00}, {0xc9, 0x00}, {0xca, 0x80}, {0xcb, 0x00}, - - //PAGA 0: - {0x5e, 0x00},{0x9f, 0x03} - }; - - -static u8 ZEBRA_AGC[]={ +static u8 MAC_REG_TABLE[][2] = { + /*PAGA 0: */ + /* 0x34(BRSR), 0xBE(RATE_FALLBACK_CTL), 0x1E0(ARFR) would set in HwConfigureRTL8185() */ + /* 0x272(RFSW_CTRL), 0x1CE(AESMSK_QC) set in InitializeAdapter8185(). */ + /* 0x1F0~0x1F8 set in MacConfig_85BASIC() */ + {0x08, 0xae}, {0x0a, 0x72}, {0x5b, 0x42}, + {0x84, 0x88}, {0x85, 0x24}, {0x88, 0x54}, {0x8b, 0xb8}, {0x8c, 0x03}, + {0x8d, 0x40}, {0x8e, 0x00}, {0x8f, 0x00}, {0x5b, 0x18}, {0x91, 0x03}, + {0x94, 0x0F}, {0x95, 0x32}, + {0x96, 0x00}, {0x97, 0x07}, {0xb4, 0x22}, {0xdb, 0x00}, + {0xf0, 0x32}, {0xf1, 0x32}, {0xf2, 0x00}, {0xf3, 0x00}, {0xf4, 0x32}, + {0xf5, 0x43}, {0xf6, 0x00}, {0xf7, 0x00}, {0xf8, 0x46}, {0xf9, 0xa4}, + {0xfa, 0x00}, {0xfb, 0x00}, {0xfc, 0x96}, {0xfd, 0xa4}, {0xfe, 0x00}, + {0xff, 0x00}, + + /*PAGE 1: */ + /* For Flextronics system Logo PCIHCT failure: */ + /* 0x1C4~0x1CD set no-zero value to avoid PCI configuration space 0x45[7]=1 */ + {0x5e, 0x01}, + {0x58, 0x00}, {0x59, 0x00}, {0x5a, 0x04}, {0x5b, 0x00}, {0x60, 0x24}, + {0x61, 0x97}, {0x62, 0xF0}, {0x63, 0x09}, {0x80, 0x0F}, {0x81, 0xFF}, + {0x82, 0xFF}, {0x83, 0x03}, + {0xC4, 0x22}, {0xC5, 0x22}, {0xC6, 0x22}, {0xC7, 0x22}, {0xC8, 0x22}, /* lzm add 080826 */ + {0xC9, 0x22}, {0xCA, 0x22}, {0xCB, 0x22}, {0xCC, 0x22}, {0xCD, 0x22},/* lzm add 080826 */ + {0xe2, 0x00}, + + + /* PAGE 2: */ + {0x5e, 0x02}, + {0x0c, 0x04}, {0x4c, 0x30}, {0x4d, 0x08}, {0x50, 0x05}, {0x51, 0xf5}, + {0x52, 0x04}, {0x53, 0xa0}, {0x54, 0xff}, {0x55, 0xff}, {0x56, 0xff}, + {0x57, 0xff}, {0x58, 0x08}, {0x59, 0x08}, {0x5a, 0x08}, {0x5b, 0x08}, + {0x60, 0x08}, {0x61, 0x08}, {0x62, 0x08}, {0x63, 0x08}, {0x64, 0x2f}, + {0x8c, 0x3f}, {0x8d, 0x3f}, {0x8e, 0x3f}, + {0x8f, 0x3f}, {0xc4, 0xff}, {0xc5, 0xff}, {0xc6, 0xff}, {0xc7, 0xff}, + {0xc8, 0x00}, {0xc9, 0x00}, {0xca, 0x80}, {0xcb, 0x00}, + + /* PAGA 0: */ + {0x5e, 0x00}, {0x9f, 0x03} + }; + + +static u8 ZEBRA_AGC[] = { 0, - 0x7E,0x7E,0x7E,0x7E,0x7D,0x7C,0x7B,0x7A,0x79,0x78,0x77,0x76,0x75,0x74,0x73,0x72, - 0x71,0x70,0x6F,0x6E,0x6D,0x6C,0x6B,0x6A,0x69,0x68,0x67,0x66,0x65,0x64,0x63,0x62, - 0x48,0x47,0x46,0x45,0x44,0x29,0x28,0x27,0x26,0x25,0x24,0x23,0x22,0x21,0x08,0x07, - 0x06,0x05,0x04,0x03,0x02,0x01,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x0f,0x0f,0x0f,0x0f,0x0f,0x0f,0x0f,0x0f,0x0f,0x0f,0x10,0x11,0x12,0x13,0x15,0x16, - 0x17,0x17,0x18,0x18,0x19,0x1a,0x1a,0x1b,0x1b,0x1c,0x1c,0x1d,0x1d,0x1d,0x1e,0x1e, - 0x1f,0x1f,0x1f,0x20,0x20,0x20,0x20,0x21,0x21,0x21,0x22,0x22,0x22,0x23,0x23,0x24, - 0x24,0x25,0x25,0x25,0x26,0x26,0x27,0x27,0x2F,0x2F,0x2F,0x2F,0x2F,0x2F,0x2F,0x2F + 0x7E, 0x7E, 0x7E, 0x7E, 0x7D, 0x7C, 0x7B, 0x7A, 0x79, 0x78, 0x77, 0x76, 0x75, 0x74, 0x73, 0x72, + 0x71, 0x70, 0x6F, 0x6E, 0x6D, 0x6C, 0x6B, 0x6A, 0x69, 0x68, 0x67, 0x66, 0x65, 0x64, 0x63, 0x62, + 0x48, 0x47, 0x46, 0x45, 0x44, 0x29, 0x28, 0x27, 0x26, 0x25, 0x24, 0x23, 0x22, 0x21, 0x08, 0x07, + 0x06, 0x05, 0x04, 0x03, 0x02, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x10, 0x11, 0x12, 0x13, 0x15, 0x16, + 0x17, 0x17, 0x18, 0x18, 0x19, 0x1a, 0x1a, 0x1b, 0x1b, 0x1c, 0x1c, 0x1d, 0x1d, 0x1d, 0x1e, 0x1e, + 0x1f, 0x1f, 0x1f, 0x20, 0x20, 0x20, 0x20, 0x21, 0x21, 0x21, 0x22, 0x22, 0x22, 0x23, 0x23, 0x24, + 0x24, 0x25, 0x25, 0x25, 0x26, 0x26, 0x27, 0x27, 0x2F, 0x2F, 0x2F, 0x2F, 0x2F, 0x2F, 0x2F, 0x2F }; -static u32 ZEBRA_RF_RX_GAIN_TABLE[]={ - 0x0096,0x0076,0x0056,0x0036,0x0016,0x01f6,0x01d6,0x01b6, - 0x0196,0x0176,0x00F7,0x00D7,0x00B7,0x0097,0x0077,0x0057, - 0x0037,0x00FB,0x00DB,0x00BB,0x00FF,0x00E3,0x00C3,0x00A3, - 0x0083,0x0063,0x0043,0x0023,0x0003,0x01E3,0x01C3,0x01A3, - 0x0183,0x0163,0x0143,0x0123,0x0103 +static u32 ZEBRA_RF_RX_GAIN_TABLE[] = { + 0x0096, 0x0076, 0x0056, 0x0036, 0x0016, 0x01f6, 0x01d6, 0x01b6, + 0x0196, 0x0176, 0x00F7, 0x00D7, 0x00B7, 0x0097, 0x0077, 0x0057, + 0x0037, 0x00FB, 0x00DB, 0x00BB, 0x00FF, 0x00E3, 0x00C3, 0x00A3, + 0x0083, 0x0063, 0x0043, 0x0023, 0x0003, 0x01E3, 0x01C3, 0x01A3, + 0x0183, 0x0163, 0x0143, 0x0123, 0x0103 }; -static u8 OFDM_CONFIG[]={ - // OFDM reg0x06[7:0]=0xFF: Enable power saving mode in RX - // OFDM reg0x3C[4]=1'b1: Enable RX power saving mode - // ofdm 0x3a = 0x7b ,(original : 0xfb) For ECS shielding room TP test +static u8 OFDM_CONFIG[] = { + /* OFDM reg0x06[7:0]=0xFF: Enable power saving mode in RX */ + /* OFDM reg0x3C[4]=1'b1: Enable RX power saving mode */ + /* ofdm 0x3a = 0x7b ,(original : 0xfb) For ECS shielding room TP test */ - // 0x00 + /* 0x00 */ 0x10, 0x0F, 0x0A, 0x0C, 0x14, 0xFA, 0xFF, 0x50, 0x00, 0x50, 0x00, 0x00, 0x00, 0x5C, 0x00, 0x00, - // 0x10 + /* 0x10 */ 0x40, 0x00, 0x40, 0x00, 0x00, 0x00, 0xA8, 0x26, 0x32, 0x33, 0x06, 0xA5, 0x6F, 0x55, 0xC8, 0xBB, - // 0x20 + /* 0x20 */ 0x0A, 0xE1, 0x2C, 0x4A, 0x86, 0x83, 0x34, 0x00, 0x4F, 0x24, 0x6F, 0xC2, 0x03, 0x40, 0x80, 0x00, - // 0x30 + /* 0x30 */ 0xC0, 0xC1, 0x58, 0xF1, 0x00, 0xC4, 0x90, 0x3e, 0xD8, 0x3C, 0x7B, 0x10, 0x10 }; -/*--------------------------------------------------------------- - * Hardware IO - * the code is ported from Windows source code - ----------------------------------------------------------------*/ +/* --------------------------------------------------------------- + * Hardware IO + * the code is ported from Windows source code + ----------------------------------------------------------------*/ void PlatformIOWrite1Byte( @@ -126,7 +126,7 @@ PlatformIOWrite1Byte( ) { write_nic_byte(dev, offset, data); - read_nic_byte(dev, offset); // To make sure write operation is completed, 2005.11.09, by rcnjko. + read_nic_byte(dev, offset); /* To make sure write operation is completed, 2005.11.09, by rcnjko. */ } @@ -138,7 +138,7 @@ PlatformIOWrite2Byte( ) { write_nic_word(dev, offset, data); - read_nic_word(dev, offset); // To make sure write operation is completed, 2005.11.09, by rcnjko. + read_nic_word(dev, offset); /* To make sure write operation is completed, 2005.11.09, by rcnjko. */ } @@ -151,9 +151,9 @@ PlatformIOWrite4Byte( u32 data ) { -//{by amy 080312 -if (offset == PhyAddr) - {//For Base Band configuration. +/* {by amy 080312 */ +if (offset == PhyAddr) { +/* For Base Band configuration. */ unsigned char cmdByte; unsigned long dataBytes; unsigned char idx; @@ -162,37 +162,36 @@ if (offset == PhyAddr) cmdByte = (u8)(data & 0x000000ff); dataBytes = data>>8; - // - // 071010, rcnjko: - // The critical section is only BB read/write race condition. - // Assumption: - // 1. We assume NO one will access BB at DIRQL, otherwise, system will crash for - // acquiring the spinlock in such context. - // 2. PlatformIOWrite4Byte() MUST NOT be recursive. - // -// NdisAcquireSpinLock( &(pDevice->IoSpinLock) ); - - for(idx = 0; idx < 30; idx++) - { // Make sure command bit is clear before access it. + /* + 071010, rcnjko: + The critical section is only BB read/write race condition. + Assumption: + 1. We assume NO one will access BB at DIRQL, otherwise, system will crash for + acquiring the spinlock in such context. + 2. PlatformIOWrite4Byte() MUST NOT be recursive. + */ +/* NdisAcquireSpinLock( &(pDevice->IoSpinLock) ); */ + + for (idx = 0; idx < 30; idx++) { + /* Make sure command bit is clear before access it. */ u1bTmp = PlatformIORead1Byte(dev, PhyAddr); - if((u1bTmp & BIT7) == 0) + if ((u1bTmp & BIT7) == 0) break; else mdelay(10); } - for(idx=0; idx < 3; idx++) - { - PlatformIOWrite1Byte(dev,offset+1+idx,((u8*)&dataBytes)[idx] ); - } + for (idx = 0; idx < 3; idx++) + PlatformIOWrite1Byte(dev, offset+1+idx, ((u8 *)&dataBytes)[idx]); + write_nic_byte(dev, offset, cmdByte); -// NdisReleaseSpinLock( &(pDevice->IoSpinLock) ); +/* NdisReleaseSpinLock( &(pDevice->IoSpinLock) ); */ } -//by amy 080312} - else{ +/* by amy 080312} */ + else { write_nic_dword(dev, offset, data); - read_nic_dword(dev, offset); // To make sure write operation is completed, 2005.11.09, by rcnjko. + read_nic_dword(dev, offset); /* To make sure write operation is completed, 2005.11.09, by rcnjko. */ } } @@ -256,59 +255,49 @@ HwHSSIThreeWire( u8 TryCnt; u8 u1bTmp; - do - { - // Check if WE and RE are cleared. - for(TryCnt = 0; TryCnt < TC_3W_POLL_MAX_TRY_CNT; TryCnt++) - { + do { + /* Check if WE and RE are cleared. */ + for (TryCnt = 0; TryCnt < TC_3W_POLL_MAX_TRY_CNT; TryCnt++) { u1bTmp = read_nic_byte(dev, SW_3W_CMD1); - if( (u1bTmp & (SW_3W_CMD1_RE|SW_3W_CMD1_WE)) == 0 ) - { + if ((u1bTmp & (SW_3W_CMD1_RE|SW_3W_CMD1_WE)) == 0) break; - } + udelay(10); } if (TryCnt == TC_3W_POLL_MAX_TRY_CNT) panic("HwThreeWire(): CmdReg: %#X RE|WE bits are not clear!!\n", u1bTmp); - // RTL8187S HSSI Read/Write Function + /* RTL8187S HSSI Read/Write Function */ u1bTmp = read_nic_byte(dev, RF_SW_CONFIG); - if(bSI) - { - u1bTmp |= RF_SW_CFG_SI; //reg08[1]=1 Serial Interface(SI) - }else - { - u1bTmp &= ~RF_SW_CFG_SI; //reg08[1]=0 Parallel Interface(PI) - } + if (bSI) + u1bTmp |= RF_SW_CFG_SI; /* reg08[1]=1 Serial Interface(SI) */ + + else + u1bTmp &= ~RF_SW_CFG_SI; /* reg08[1]=0 Parallel Interface(PI) */ + write_nic_byte(dev, RF_SW_CONFIG, u1bTmp); - if(bSI) - { - // jong: HW SI read must set reg84[3]=0. + if (bSI) { + /* jong: HW SI read must set reg84[3]=0. */ u1bTmp = read_nic_byte(dev, RFPinsSelect); u1bTmp &= ~BIT3; - write_nic_byte(dev, RFPinsSelect, u1bTmp ); + write_nic_byte(dev, RFPinsSelect, u1bTmp); } - // Fill up data buffer for write operation. - - if(bWrite) - { - if(nDataBufBitCnt == 16) - { - write_nic_word(dev, SW_3W_DB0, *((u16*)pDataBuf)); - } - else if(nDataBufBitCnt == 64) // RTL8187S shouldn't enter this case - { - write_nic_dword(dev, SW_3W_DB0, *((u32*)pDataBuf)); - write_nic_dword(dev, SW_3W_DB1, *((u32*)(pDataBuf + 4))); - } - else - { + /* Fill up data buffer for write operation. */ + + if (bWrite) { + if (nDataBufBitCnt == 16) { + write_nic_word(dev, SW_3W_DB0, *((u16 *)pDataBuf)); + } else if (nDataBufBitCnt == 64) { + /* RTL8187S shouldn't enter this case */ + write_nic_dword(dev, SW_3W_DB0, *((u32 *)pDataBuf)); + write_nic_dword(dev, SW_3W_DB1, *((u32 *)(pDataBuf + 4))); + } else { int idx; int ByteCnt = nDataBufBitCnt / 8; - //printk("%d\n",nDataBufBitCnt); + /* printk("%d\n",nDataBufBitCnt); */ if ((nDataBufBitCnt % 8) != 0) panic("HwThreeWire(): nDataBufBitCnt(%d) should be multiple of 8!!!\n", nDataBufBitCnt); @@ -317,67 +306,53 @@ HwHSSIThreeWire( panic("HwThreeWire(): nDataBufBitCnt(%d) should <= 64!!!\n", nDataBufBitCnt); - for(idx = 0; idx < ByteCnt; idx++) - { + for (idx = 0; idx < ByteCnt; idx++) write_nic_byte(dev, (SW_3W_DB0+idx), *(pDataBuf+idx)); - } - } - } - else //read - { - if(bSI) - { - // SI - reg274[3:0] : RF register's Address - write_nic_word(dev, SW_3W_DB0, *((u16*)pDataBuf) ); + } - else - { - // PI - reg274[15:12] : RF register's Address - write_nic_word(dev, SW_3W_DB0, (*((u16*)pDataBuf)) << 12); + } else { /* read */ + if (bSI) { + /* SI - reg274[3:0] : RF register's Address */ + write_nic_word(dev, SW_3W_DB0, *((u16 *)pDataBuf)); + } else { + /* PI - reg274[15:12] : RF register's Address */ + write_nic_word(dev, SW_3W_DB0, (*((u16 *)pDataBuf)) << 12); } } - // Set up command: WE or RE. - if(bWrite) - { + /* Set up command: WE or RE. */ + if (bWrite) write_nic_byte(dev, SW_3W_CMD1, SW_3W_CMD1_WE); - } + else - { write_nic_byte(dev, SW_3W_CMD1, SW_3W_CMD1_RE); - } - // Check if DONE is set. - for(TryCnt = 0; TryCnt < TC_3W_POLL_MAX_TRY_CNT; TryCnt++) - { + + /* Check if DONE is set. */ + for (TryCnt = 0; TryCnt < TC_3W_POLL_MAX_TRY_CNT; TryCnt++) { u1bTmp = read_nic_byte(dev, SW_3W_CMD1); - if( (u1bTmp & SW_3W_CMD1_DONE) != 0 ) - { + if ((u1bTmp & SW_3W_CMD1_DONE) != 0) break; - } + udelay(10); } write_nic_byte(dev, SW_3W_CMD1, 0); - // Read back data for read operation. - if(bWrite == 0) - { - if(bSI) - { - //Serial Interface : reg363_362[11:0] - *((u16*)pDataBuf) = read_nic_word(dev, SI_DATA_READ) ; - } - else - { - //Parallel Interface : reg361_360[11:0] - *((u16*)pDataBuf) = read_nic_word(dev, PI_DATA_READ); + /* Read back data for read operation. */ + if (bWrite == 0) { + if (bSI) { + /* Serial Interface : reg363_362[11:0] */ + *((u16 *)pDataBuf) = read_nic_word(dev, SI_DATA_READ) ; + } else { + /* Parallel Interface : reg361_360[11:0] */ + *((u16 *)pDataBuf) = read_nic_word(dev, PI_DATA_READ); } - *((u16*)pDataBuf) &= 0x0FFF; + *((u16 *)pDataBuf) &= 0x0FFF; } - }while(0); + } while (0); return bResult; } @@ -410,25 +385,25 @@ u32 RF_ReadReg(struct net_device *dev, u8 offset) } -// by Owen on 04/07/14 for writing BB register successfully +/* by Owen on 04/07/14 for writing BB register successfully */ void WriteBBPortUchar( struct net_device *dev, u32 Data ) { - //u8 TimeoutCounter; + /* u8 TimeoutCounter; */ u8 RegisterContent; u8 UCharData; UCharData = (u8)((Data & 0x0000ff00) >> 8); PlatformIOWrite4Byte(dev, PhyAddr, Data); - //for(TimeoutCounter = 10; TimeoutCounter > 0; TimeoutCounter--) + /* for(TimeoutCounter = 10; TimeoutCounter > 0; TimeoutCounter--) */ { PlatformIOWrite4Byte(dev, PhyAddr, Data & 0xffffff7f); RegisterContent = PlatformIORead1Byte(dev, PhyDataR); - //if(UCharData == RegisterContent) - // break; + /*if(UCharData == RegisterContent) */ + /* break; */ } } @@ -438,7 +413,7 @@ ReadBBPortUchar( u32 addr ) { - //u8 TimeoutCounter; + /*u8 TimeoutCounter; */ u8 RegisterContent; PlatformIOWrite4Byte(dev, PhyAddr, addr & 0xffffff7f); @@ -446,93 +421,87 @@ ReadBBPortUchar( return RegisterContent; } -//{by amy 080312 -// -// Description: -// Perform Antenna settings with antenna diversity on 87SE. -// Created by Roger, 2008.01.25. -// +/* {by amy 080312 */ +/* + Description: + Perform Antenna settings with antenna diversity on 87SE. + Created by Roger, 2008.01.25. +*/ bool SetAntennaConfig87SE( struct net_device *dev, - u8 DefaultAnt, // 0: Main, 1: Aux. - bool bAntDiversity // 1:Enable, 0: Disable. + u8 DefaultAnt, /* 0: Main, 1: Aux. */ + bool bAntDiversity /* 1:Enable, 0: Disable. */ ) { struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev); bool bAntennaSwitched = true; - //printk("SetAntennaConfig87SE(): DefaultAnt(%d), bAntDiversity(%d)\n", DefaultAnt, bAntDiversity); + /* printk("SetAntennaConfig87SE(): DefaultAnt(%d), bAntDiversity(%d)\n", DefaultAnt, bAntDiversity); */ - // Threshold for antenna diversity. - write_phy_cck(dev, 0x0c, 0x09); // Reg0c : 09 + /* Threshold for antenna diversity. */ + write_phy_cck(dev, 0x0c, 0x09); /* Reg0c : 09 */ - if( bAntDiversity ) // Enable Antenna Diversity. - { - if( DefaultAnt == 1 ) // aux antenna - { - // Mac register, aux antenna + if (bAntDiversity) { /* Enable Antenna Diversity. */ + if (DefaultAnt == 1) { /* aux antenna */ + + /* Mac register, aux antenna */ write_nic_byte(dev, ANTSEL, 0x00); - // Config CCK RX antenna. - write_phy_cck(dev, 0x11, 0xbb); // Reg11 : bb - write_phy_cck(dev, 0x01, 0xc7); // Reg01 : c7 + /* Config CCK RX antenna. */ + write_phy_cck(dev, 0x11, 0xbb); /* Reg11 : bb */ + write_phy_cck(dev, 0x01, 0xc7); /* Reg01 : c7 */ - // Config OFDM RX antenna. - write_phy_ofdm(dev, 0x0D, 0x54); // Reg0d : 54 - write_phy_ofdm(dev, 0x18, 0xb2); // Reg18 : b2 - } - else // use main antenna - { - // Mac register, main antenna + /* Config OFDM RX antenna. */ + write_phy_ofdm(dev, 0x0D, 0x54); /* Reg0d : 54 */ + write_phy_ofdm(dev, 0x18, 0xb2); /* Reg18 : b2 */ + } else { /* use main antenna */ + /* Mac register, main antenna */ write_nic_byte(dev, ANTSEL, 0x03); - //base band - // Config CCK RX antenna. - write_phy_cck(dev, 0x11, 0x9b); // Reg11 : 9b - write_phy_cck(dev, 0x01, 0xc7); // Reg01 : c7 - - // Config OFDM RX antenna. - write_phy_ofdm(dev, 0x0d, 0x5c); // Reg0d : 5c - write_phy_ofdm(dev, 0x18, 0xb2); // Reg18 : b2 + /* base band */ + /* Config CCK RX antenna. */ + write_phy_cck(dev, 0x11, 0x9b); /* Reg11 : 9b */ + write_phy_cck(dev, 0x01, 0xc7); /* Reg01 : c7 */ + + /* Config OFDM RX antenna. */ + write_phy_ofdm(dev, 0x0d, 0x5c); /* Reg0d : 5c */ + write_phy_ofdm(dev, 0x18, 0xb2); /* Reg18 : b2 */ } - } - else // Disable Antenna Diversity. - { - if( DefaultAnt == 1 ) // aux Antenna - { - // Mac register, aux antenna + } else { + /* Disable Antenna Diversity. */ + if (DefaultAnt == 1) { /* aux Antenna */ + /* Mac register, aux antenna */ write_nic_byte(dev, ANTSEL, 0x00); - // Config CCK RX antenna. - write_phy_cck(dev, 0x11, 0xbb); // Reg11 : bb - write_phy_cck(dev, 0x01, 0x47); // Reg01 : 47 + /* Config CCK RX antenna. */ + write_phy_cck(dev, 0x11, 0xbb); /* Reg11 : bb */ + write_phy_cck(dev, 0x01, 0x47); /* Reg01 : 47 */ - // Config OFDM RX antenna. - write_phy_ofdm(dev, 0x0D, 0x54); // Reg0d : 54 - write_phy_ofdm(dev, 0x18, 0x32); // Reg18 : 32 - } - else // main Antenna - { - // Mac register, main antenna + /* Config OFDM RX antenna. */ + write_phy_ofdm(dev, 0x0D, 0x54); /* Reg0d : 54 */ + write_phy_ofdm(dev, 0x18, 0x32); /* Reg18 : 32 */ + } else { /* main Antenna */ + /* Mac register, main antenna */ write_nic_byte(dev, ANTSEL, 0x03); - // Config CCK RX antenna. - write_phy_cck(dev, 0x11, 0x9b); // Reg11 : 9b - write_phy_cck(dev, 0x01, 0x47); // Reg01 : 47 + /* Config CCK RX antenna. */ + write_phy_cck(dev, 0x11, 0x9b); /* Reg11 : 9b */ + write_phy_cck(dev, 0x01, 0x47); /* Reg01 : 47 */ - // Config OFDM RX antenna. - write_phy_ofdm(dev, 0x0D, 0x5c); // Reg0d : 5c - write_phy_ofdm(dev, 0x18, 0x32); // Reg18 : 32 + /* Config OFDM RX antenna. */ + write_phy_ofdm(dev, 0x0D, 0x5c); /* Reg0d : 5c */ + write_phy_ofdm(dev, 0x18, 0x32); /*Reg18 : 32 */ } } - priv->CurrAntennaIndex = DefaultAnt; // Update default settings. + priv->CurrAntennaIndex = DefaultAnt; /* Update default settings. */ return bAntennaSwitched; } -//by amy 080312 -/*--------------------------------------------------------------- - * Hardware Initialization. - * the code is ported from Windows source code - ----------------------------------------------------------------*/ +/* by amy 080312 */ +/* +--------------------------------------------------------------- + * Hardware Initialization. + * the code is ported from Windows source code +----------------------------------------------------------------*/ void ZEBRA_Config_85BASIC_HardCode( @@ -542,36 +511,38 @@ ZEBRA_Config_85BASIC_HardCode( struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev); u32 i; - u32 addr,data; + u32 addr, data; u32 u4bRegOffset, u4bRegValue, u4bRF23, u4bRF24; - u8 u1b24E; + u8 u1b24E; int d_cut = 0; - //============================================================================= - // 87S_PCIE :: RADIOCFG.TXT - //============================================================================= +/* +============================================================================= + 87S_PCIE :: RADIOCFG.TXT +============================================================================= +*/ - // Page1 : reg16-reg30 - RF_WriteReg(dev, 0x00, 0x013f); mdelay(1); // switch to page1 - u4bRF23= RF_ReadReg(dev, 0x08); mdelay(1); - u4bRF24= RF_ReadReg(dev, 0x09); mdelay(1); + /* Page1 : reg16-reg30 */ + RF_WriteReg(dev, 0x00, 0x013f); mdelay(1); /* switch to page1 */ + u4bRF23 = RF_ReadReg(dev, 0x08); mdelay(1); + u4bRF24 = RF_ReadReg(dev, 0x09); mdelay(1); if (u4bRF23 == 0x818 && u4bRF24 == 0x70C) { d_cut = 1; printk(KERN_INFO "rtl8187se: card type changed from C- to D-cut\n"); } - // Page0 : reg0-reg15 + /* Page0 : reg0-reg15 */ - RF_WriteReg(dev, 0x00, 0x009f); mdelay(1);// 1 + RF_WriteReg(dev, 0x00, 0x009f); mdelay(1);/* 1 */ RF_WriteReg(dev, 0x01, 0x06e0); mdelay(1); - RF_WriteReg(dev, 0x02, 0x004d); mdelay(1);// 2 + RF_WriteReg(dev, 0x02, 0x004d); mdelay(1);/* 2 */ - RF_WriteReg(dev, 0x03, 0x07f1); mdelay(1);// 3 + RF_WriteReg(dev, 0x03, 0x07f1); mdelay(1);/* 3 */ RF_WriteReg(dev, 0x04, 0x0975); mdelay(1); RF_WriteReg(dev, 0x05, 0x0c72); mdelay(1); @@ -587,7 +558,7 @@ ZEBRA_Config_85BASIC_HardCode( RF_WriteReg(dev, 0x0f, 0x0990); mdelay(1); - // Page1 : reg16-reg30 + /* Page1 : reg16-reg30 */ RF_WriteReg(dev, 0x00, 0x013f); mdelay(1); RF_WriteReg(dev, 0x03, 0x0806); mdelay(1); @@ -598,143 +569,142 @@ ZEBRA_Config_85BASIC_HardCode( RF_WriteReg(dev, 0x07, 0x01A0); mdelay(1); -// Don't write RF23/RF24 to make a difference between 87S C cut and D cut. asked by SD3 stevenl. +/* Don't write RF23/RF24 to make a difference between 87S C cut and D cut. asked by SD3 stevenl. */ RF_WriteReg(dev, 0x0a, 0x0001); mdelay(1); RF_WriteReg(dev, 0x0b, 0x0418); mdelay(1); if (d_cut) { RF_WriteReg(dev, 0x0c, 0x0fbe); mdelay(1); RF_WriteReg(dev, 0x0d, 0x0008); mdelay(1); - RF_WriteReg(dev, 0x0e, 0x0807); mdelay(1); // RX LO buffer - } else { + RF_WriteReg(dev, 0x0e, 0x0807); mdelay(1); /* RX LO buffer */ + } else { RF_WriteReg(dev, 0x0c, 0x0fbe); mdelay(1); RF_WriteReg(dev, 0x0d, 0x0008); mdelay(1); - RF_WriteReg(dev, 0x0e, 0x0806); mdelay(1); // RX LO buffer + RF_WriteReg(dev, 0x0e, 0x0806); mdelay(1); /* RX LO buffer */ } RF_WriteReg(dev, 0x0f, 0x0acc); mdelay(1); - RF_WriteReg(dev, 0x00, 0x01d7); mdelay(1);// 6 + RF_WriteReg(dev, 0x00, 0x01d7); mdelay(1); /* 6 */ RF_WriteReg(dev, 0x03, 0x0e00); mdelay(1); RF_WriteReg(dev, 0x04, 0x0e50); mdelay(1); - for(i=0;i<=36;i++) - { + for (i = 0; i <= 36; i++) { RF_WriteReg(dev, 0x01, i); mdelay(1); RF_WriteReg(dev, 0x02, ZEBRA_RF_RX_GAIN_TABLE[i]); mdelay(1); } - RF_WriteReg(dev, 0x05, 0x0203); mdelay(1); /// 203, 343 - RF_WriteReg(dev, 0x06, 0x0200); mdelay(1); // 400 + RF_WriteReg(dev, 0x05, 0x0203); mdelay(1); /* 203, 343 */ + RF_WriteReg(dev, 0x06, 0x0200); mdelay(1); /* 400 */ - RF_WriteReg(dev, 0x00, 0x0137); mdelay(1); // switch to reg16-reg30, and HSSI disable 137 - mdelay(10); // Deay 10 ms. //0xfd + RF_WriteReg(dev, 0x00, 0x0137); mdelay(1); /* switch to reg16-reg30, and HSSI disable 137 */ + mdelay(10); /* Deay 10 ms. */ /* 0xfd */ - RF_WriteReg(dev, 0x0d, 0x0008); mdelay(1); // Z4 synthesizer loop filter setting, 392 - mdelay(10); // Deay 10 ms. //0xfd + RF_WriteReg(dev, 0x0d, 0x0008); mdelay(1); /* Z4 synthesizer loop filter setting, 392 */ + mdelay(10); /* Deay 10 ms. */ /* 0xfd */ - RF_WriteReg(dev, 0x00, 0x0037); mdelay(1); // switch to reg0-reg15, and HSSI disable - mdelay(10); // Deay 10 ms. //0xfd + RF_WriteReg(dev, 0x00, 0x0037); mdelay(1); /* switch to reg0-reg15, and HSSI disable */ + mdelay(10); /* Deay 10 ms. */ /* 0xfd */ - RF_WriteReg(dev, 0x04, 0x0160); mdelay(1); // CBC on, Tx Rx disable, High gain - mdelay(10); // Deay 10 ms. //0xfd + RF_WriteReg(dev, 0x04, 0x0160); mdelay(1); /* CBC on, Tx Rx disable, High gain */ + mdelay(10); /* Deay 10 ms. */ /* 0xfd */ - RF_WriteReg(dev, 0x07, 0x0080); mdelay(1); // Z4 setted channel 1 - mdelay(10); // Deay 10 ms. //0xfd + RF_WriteReg(dev, 0x07, 0x0080); mdelay(1); /* Z4 setted channel 1 */ + mdelay(10); /* Deay 10 ms. */ /* 0xfd */ - RF_WriteReg(dev, 0x02, 0x088D); mdelay(1); // LC calibration - mdelay(200); // Deay 200 ms. //0xfd - mdelay(10); // Deay 10 ms. //0xfd - mdelay(10); // Deay 10 ms. //0xfd + RF_WriteReg(dev, 0x02, 0x088D); mdelay(1); /* LC calibration */ + mdelay(200); /* Deay 200 ms. */ /* 0xfd */ + mdelay(10); /* Deay 10 ms. */ /* 0xfd */ + mdelay(10); /* Deay 10 ms. */ /* 0xfd */ - RF_WriteReg(dev, 0x00, 0x0137); mdelay(1); // switch to reg16-reg30 137, and HSSI disable 137 - mdelay(10); // Deay 10 ms. //0xfd + RF_WriteReg(dev, 0x00, 0x0137); mdelay(1); /* switch to reg16-reg30 137, and HSSI disable 137 */ + mdelay(10); /* Deay 10 ms. */ /* 0xfd */ RF_WriteReg(dev, 0x07, 0x0000); mdelay(1); RF_WriteReg(dev, 0x07, 0x0180); mdelay(1); RF_WriteReg(dev, 0x07, 0x0220); mdelay(1); RF_WriteReg(dev, 0x07, 0x03E0); mdelay(1); - // DAC calibration off 20070702 + /* DAC calibration off 20070702 */ RF_WriteReg(dev, 0x06, 0x00c1); mdelay(1); RF_WriteReg(dev, 0x0a, 0x0001); mdelay(1); -//{by amy 080312 - // For crystal calibration, added by Roger, 2007.12.11. - if( priv->bXtalCalibration ) // reg 30. - { // enable crystal calibration. - // RF Reg[30], (1)Xin:[12:9], Xout:[8:5], addr[4:0]. - // (2)PA Pwr delay timer[15:14], default: 2.4us, set BIT15=0 - // (3)RF signal on/off when calibration[13], default: on, set BIT13=0. - // So we should minus 4 BITs offset. - RF_WriteReg(dev, 0x0f, (priv->XtalCal_Xin<<5)|(priv->XtalCal_Xout<<1)|BIT11|BIT9); mdelay(1); +/* {by amy 080312 */ + /* For crystal calibration, added by Roger, 2007.12.11. */ + if (priv->bXtalCalibration) { /* reg 30. */ + /* enable crystal calibration. + RF Reg[30], (1)Xin:[12:9], Xout:[8:5], addr[4:0]. + (2)PA Pwr delay timer[15:14], default: 2.4us, set BIT15=0 + (3)RF signal on/off when calibration[13], default: on, set BIT13=0. + So we should minus 4 BITs offset. */ + RF_WriteReg(dev, 0x0f, (priv->XtalCal_Xin<<5) | (priv->XtalCal_Xout<<1) | BIT11 | BIT9); mdelay(1); printk("ZEBRA_Config_85BASIC_HardCode(): (%02x)\n", - (priv->XtalCal_Xin<<5) | (priv->XtalCal_Xout<<1) | BIT11| BIT9); - } - else - { // using default value. Xin=6, Xout=6. + (priv->XtalCal_Xin<<5) | (priv->XtalCal_Xout<<1) | BIT11 | BIT9); + } else { + /* using default value. Xin=6, Xout=6. */ RF_WriteReg(dev, 0x0f, 0x0acc); mdelay(1); } -//by amy 080312 - - RF_WriteReg(dev, 0x00, 0x00bf); mdelay(1); // switch to reg0-reg15, and HSSI enable - RF_WriteReg(dev, 0x0d, 0x08df); mdelay(1); // Rx BB start calibration, 00c//+edward - RF_WriteReg(dev, 0x02, 0x004d); mdelay(1); // temperature meter off - RF_WriteReg(dev, 0x04, 0x0975); mdelay(1); // Rx mode - mdelay(10); // Deay 10 ms. //0xfe - mdelay(10); // Deay 10 ms. //0xfe - mdelay(10); // Deay 10 ms. //0xfe - RF_WriteReg(dev, 0x00, 0x0197); mdelay(1); // Rx mode//+edward - RF_WriteReg(dev, 0x05, 0x05ab); mdelay(1); // Rx mode//+edward - RF_WriteReg(dev, 0x00, 0x009f); mdelay(1); // Rx mode//+edward - - RF_WriteReg(dev, 0x01, 0x0000); mdelay(1); // Rx mode//+edward - RF_WriteReg(dev, 0x02, 0x0000); mdelay(1); // Rx mode//+edward - //power save parameters. +/* by amy 080312 */ + + RF_WriteReg(dev, 0x00, 0x00bf); mdelay(1); /* switch to reg0-reg15, and HSSI enable */ + RF_WriteReg(dev, 0x0d, 0x08df); mdelay(1); /* Rx BB start calibration, 00c//+edward */ + RF_WriteReg(dev, 0x02, 0x004d); mdelay(1); /* temperature meter off */ + RF_WriteReg(dev, 0x04, 0x0975); mdelay(1); /* Rx mode */ + mdelay(10); /* Deay 10 ms.*/ /* 0xfe */ + mdelay(10); /* Deay 10 ms.*/ /* 0xfe */ + mdelay(10); /* Deay 10 ms.*/ /* 0xfe */ + RF_WriteReg(dev, 0x00, 0x0197); mdelay(1); /* Rx mode*/ /*+edward */ + RF_WriteReg(dev, 0x05, 0x05ab); mdelay(1); /* Rx mode*/ /*+edward */ + RF_WriteReg(dev, 0x00, 0x009f); mdelay(1); /* Rx mode*/ /*+edward */ + + RF_WriteReg(dev, 0x01, 0x0000); mdelay(1); /* Rx mode*/ /*+edward */ + RF_WriteReg(dev, 0x02, 0x0000); mdelay(1); /* Rx mode*/ /*+edward */ + /* power save parameters. */ u1b24E = read_nic_byte(dev, 0x24E); write_nic_byte(dev, 0x24E, (u1b24E & (~(BIT5|BIT6)))); - //============================================================================= - - //============================================================================= - // CCKCONF.TXT - //============================================================================= + /*============================================================================= + ============================================================================= + CCKCONF.TXT + ============================================================================= + */ /* [POWER SAVE] Power Saving Parameters by jong. 2007-11-27 - CCK reg0x00[7]=1'b1 :power saving for TX (default) + CCK reg0x00[7]=1'b1 :power saving for TX (default) CCK reg0x00[6]=1'b1: power saving for RX (default) CCK reg0x06[4]=1'b1: turn off channel estimation related circuits if not doing channel estimation. CCK reg0x06[3]=1'b1: turn off unused circuits before cca = 1 CCK reg0x06[2]=1'b1: turn off cck's circuit if macrst =0 */ - write_phy_cck(dev,0x00,0xc8); - write_phy_cck(dev,0x06,0x1c); - write_phy_cck(dev,0x10,0x78); - write_phy_cck(dev,0x2e,0xd0); - write_phy_cck(dev,0x2f,0x06); - write_phy_cck(dev,0x01,0x46); + write_phy_cck(dev, 0x00, 0xc8); + write_phy_cck(dev, 0x06, 0x1c); + write_phy_cck(dev, 0x10, 0x78); + write_phy_cck(dev, 0x2e, 0xd0); + write_phy_cck(dev, 0x2f, 0x06); + write_phy_cck(dev, 0x01, 0x46); - // power control + /* power control */ write_nic_byte(dev, CCK_TXAGC, 0x10); write_nic_byte(dev, OFDM_TXAGC, 0x1B); write_nic_byte(dev, ANTSEL, 0x03); - //============================================================================= - // AGC.txt - //============================================================================= + /* + ============================================================================= + AGC.txt + ============================================================================= + */ write_phy_ofdm(dev, 0x00, 0x12); - for (i=0; i<128; i++) - { + for (i = 0; i < 128; i++) { data = ZEBRA_AGC[i+1]; data = data << 8; data = data | 0x0000008F; - addr = i + 0x80; //enable writing AGC table + addr = i + 0x80; /* enable writing AGC table */ addr = addr << 8; addr = addr | 0x0000008E; @@ -743,18 +713,19 @@ ZEBRA_Config_85BASIC_HardCode( WriteBBPortUchar(dev, 0x0000008E); } - PlatformIOWrite4Byte( dev, PhyAddr, 0x00001080); // Annie, 2006-05-05 + PlatformIOWrite4Byte(dev, PhyAddr, 0x00001080); /* Annie, 2006-05-05 */ - //============================================================================= + /* + ============================================================================= - //============================================================================= - // OFDMCONF.TXT - //============================================================================= + ============================================================================= + OFDMCONF.TXT + ============================================================================= + */ - for(i=0; i<60; i++) - { - u4bRegOffset=i; - u4bRegValue=OFDM_CONFIG[i]; + for (i = 0; i < 60; i++) { + u4bRegOffset = i; + u4bRegValue = OFDM_CONFIG[i]; WriteBBPortUchar(dev, (0x00000080 | @@ -762,14 +733,16 @@ ZEBRA_Config_85BASIC_HardCode( ((u4bRegValue & 0xff) << 8))); } - //============================================================================= -//by amy for antenna - //============================================================================= -//{by amy 080312 - // Config Sw/Hw Combinational Antenna Diversity. Added by Roger, 2008.02.26. + /* + ============================================================================= + by amy for antenna + ============================================================================= + */ +/* {by amy 080312 */ + /* Config Sw/Hw Combinational Antenna Diversity. Added by Roger, 2008.02.26. */ SetAntennaConfig87SE(dev, priv->bDefaultAntenna1, priv->bSwAntennaDiverity); -//by amy 080312} -//by amy for antenna +/* by amy 080312} */ +/* by amy for antenna */ } @@ -780,13 +753,13 @@ UpdateInitialGain( { struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev); - //lzm add 080826 - if(priv->eRFPowerState != eRfOn) - { - //Don't access BB/RF under disable PLL situation. - //RT_TRACE(COMP_DIG, DBG_LOUD, ("UpdateInitialGain - pHalData->eRFPowerState!=eRfOn\n")); - // Back to the original state - priv->InitialGain= priv->InitialGainBackUp; + /* lzm add 080826 */ + if (priv->eRFPowerState != eRfOn) { + /* Don't access BB/RF under disable PLL situation. + RT_TRACE(COMP_DIG, DBG_LOUD, ("UpdateInitialGain - pHalData->eRFPowerState!=eRfOn\n")); + Back to the original state + */ + priv->InitialGain = priv->InitialGainBackUp; return; } @@ -846,11 +819,11 @@ UpdateInitialGain( break; } } -// -// Description: -// Tx Power tracking mechanism routine on 87SE. -// Created by Roger, 2007.12.11. -// +/* + Description: + Tx Power tracking mechanism routine on 87SE. + Created by Roger, 2007.12.11. +*/ void InitTxPwrTracking87SE( struct net_device *dev @@ -860,7 +833,7 @@ InitTxPwrTracking87SE( u4bRfReg = RF_ReadReg(dev, 0x02); - // Enable Thermal meter indication. + /* Enable Thermal meter indication. */ RF_WriteReg(dev, 0x02, u4bRfReg|PWR_METER_EN); mdelay(1); } @@ -870,28 +843,27 @@ PhyConfig8185( ) { struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev); - write_nic_dword(dev, RCR, priv->ReceiveConfig); + write_nic_dword(dev, RCR, priv->ReceiveConfig); priv->RFProgType = read_nic_byte(dev, CONFIG4) & 0x03; /* RF config */ ZEBRA_Config_85BASIC_HardCode(dev); -//{by amy 080312 - // Set default initial gain state to 4, approved by SD3 DZ, by Bruce, 2007-06-06. - if(priv->bDigMechanism) - { - if(priv->InitialGain == 0) +/* {by amy 080312 */ + /* Set default initial gain state to 4, approved by SD3 DZ, by Bruce, 2007-06-06. */ + if (priv->bDigMechanism) { + if (priv->InitialGain == 0) priv->InitialGain = 4; } - // - // Enable thermal meter indication to implement TxPower tracking on 87SE. - // We initialize thermal meter here to avoid unsuccessful configuration. - // Added by Roger, 2007.12.11. - // - if(priv->bTxPowerTrack) + /* + Enable thermal meter indication to implement TxPower tracking on 87SE. + We initialize thermal meter here to avoid unsuccessful configuration. + Added by Roger, 2007.12.11. + */ + if (priv->bTxPowerTrack) InitTxPwrTracking87SE(dev); -//by amy 080312} - priv->InitialGainBackUp= priv->InitialGain; +/* by amy 080312} */ + priv->InitialGainBackUp = priv->InitialGain; UpdateInitialGain(dev); return; @@ -902,63 +874,56 @@ HwConfigureRTL8185( struct net_device *dev ) { - //RTL8185_TODO: Determine Retrylimit, TxAGC, AutoRateFallback control. - u8 bUNIVERSAL_CONTROL_RL = 0; + /* RTL8185_TODO: Determine Retrylimit, TxAGC, AutoRateFallback control. */ + u8 bUNIVERSAL_CONTROL_RL = 0; u8 bUNIVERSAL_CONTROL_AGC = 1; u8 bUNIVERSAL_CONTROL_ANT = 1; u8 bAUTO_RATE_FALLBACK_CTL = 1; u8 val8; - write_nic_word(dev, BRSR, 0x0fff); - // Retry limit + write_nic_word(dev, BRSR, 0x0fff); + /* Retry limit */ val8 = read_nic_byte(dev, CW_CONF); - if(bUNIVERSAL_CONTROL_RL) + if (bUNIVERSAL_CONTROL_RL) val8 = val8 & 0xfd; else val8 = val8 | 0x02; write_nic_byte(dev, CW_CONF, val8); - // Tx AGC + /* Tx AGC */ val8 = read_nic_byte(dev, TXAGC_CTL); - if(bUNIVERSAL_CONTROL_AGC) - { + if (bUNIVERSAL_CONTROL_AGC) { write_nic_byte(dev, CCK_TXAGC, 128); write_nic_byte(dev, OFDM_TXAGC, 128); val8 = val8 & 0xfe; - } - else - { + } else { val8 = val8 | 0x01 ; } write_nic_byte(dev, TXAGC_CTL, val8); - // Tx Antenna including Feedback control - val8 = read_nic_byte(dev, TXAGC_CTL ); + /* Tx Antenna including Feedback control */ + val8 = read_nic_byte(dev, TXAGC_CTL); - if(bUNIVERSAL_CONTROL_ANT) - { + if (bUNIVERSAL_CONTROL_ANT) { write_nic_byte(dev, ANTSEL, 0x00); val8 = val8 & 0xfd; - } - else - { - val8 = val8 & (val8|0x02); //xiong-2006-11-15 + } else { + val8 = val8 & (val8|0x02); /* xiong-2006-11-15 */ } write_nic_byte(dev, TXAGC_CTL, val8); - // Auto Rate fallback control + /* Auto Rate fallback control */ val8 = read_nic_byte(dev, RATE_FALLBACK); val8 &= 0x7c; - if( bAUTO_RATE_FALLBACK_CTL ) - { + if (bAUTO_RATE_FALLBACK_CTL) { val8 |= RATE_FALLBACK_CTL_ENABLE | RATE_FALLBACK_CTL_AUTO_STEP1; - // We shall set up the ARFR according to user's setting. - PlatformIOWrite2Byte(dev, ARFR, 0x0fff); //set 1M ~ 54Mbps. + /* We shall set up the ARFR according to user's setting. */ + PlatformIOWrite2Byte(dev, ARFR, 0x0fff); /* set 1M ~ 54Mbps. */ } write_nic_byte(dev, RATE_FALLBACK, val8); } @@ -967,32 +932,31 @@ static void MacConfig_85BASIC_HardCode( struct net_device *dev) { - //============================================================================ - // MACREG.TXT - //============================================================================ + /* + ============================================================================ + MACREG.TXT + ============================================================================ + */ int nLinesRead = 0; - u32 u4bRegOffset, u4bRegValue,u4bPageIndex = 0; + u32 u4bRegOffset, u4bRegValue, u4bPageIndex = 0; int i; - nLinesRead=sizeof(MAC_REG_TABLE)/2; + nLinesRead = sizeof(MAC_REG_TABLE)/2; + + for (i = 0; i < nLinesRead; i++) { /* nLinesRead=101 */ + u4bRegOffset = MAC_REG_TABLE[i][0]; + u4bRegValue = MAC_REG_TABLE[i][1]; + + if (u4bRegOffset == 0x5e) + u4bPageIndex = u4bRegValue; + + else + u4bRegOffset |= (u4bPageIndex << 8); - for(i = 0; i < nLinesRead; i++) //nLinesRead=101 - { - u4bRegOffset=MAC_REG_TABLE[i][0]; - u4bRegValue=MAC_REG_TABLE[i][1]; - - if(u4bRegOffset == 0x5e) - { - u4bPageIndex = u4bRegValue; - } - else - { - u4bRegOffset |= (u4bPageIndex << 8); - } write_nic_byte(dev, u4bRegOffset, (u8)u4bRegValue); } - //============================================================================ + /* ============================================================================ */ } static void @@ -1000,34 +964,34 @@ MacConfig_85BASIC( struct net_device *dev) { - u8 u1DA; + u8 u1DA; MacConfig_85BASIC_HardCode(dev); - //============================================================================ + /* ============================================================================ */ - // Follow TID_AC_MAP of WMac. + /* Follow TID_AC_MAP of WMac. */ write_nic_word(dev, TID_AC_MAP, 0xfa50); - // Interrupt Migration, Jong suggested we use set 0x0000 first, 2005.12.14, by rcnjko. + /* Interrupt Migration, Jong suggested we use set 0x0000 first, 2005.12.14, by rcnjko. */ write_nic_word(dev, IntMig, 0x0000); - // Prevent TPC to cause CRC error. Added by Annie, 2006-06-10. + /* Prevent TPC to cause CRC error. Added by Annie, 2006-06-10. */ PlatformIOWrite4Byte(dev, 0x1F0, 0x00000000); PlatformIOWrite4Byte(dev, 0x1F4, 0x00000000); PlatformIOWrite1Byte(dev, 0x1F8, 0x00); - // Asked for by SD3 CM Lin, 2006.06.27, by rcnjko. - // power save parameter based on "87SE power save parameters 20071127.doc", as follow. + /* Asked for by SD3 CM Lin, 2006.06.27, by rcnjko. */ + /* power save parameter based on "87SE power save parameters 20071127.doc", as follow. */ - //Enable DA10 TX power saving + /* Enable DA10 TX power saving */ u1DA = read_nic_byte(dev, PHYPR); - write_nic_byte(dev, PHYPR, (u1DA | BIT2) ); + write_nic_byte(dev, PHYPR, (u1DA | BIT2)); - //POWER: + /* POWER: */ write_nic_word(dev, 0x360, 0x1000); write_nic_word(dev, 0x362, 0x1000); - // AFE. + /* AFE. */ write_nic_word(dev, 0x370, 0x0560); write_nic_word(dev, 0x372, 0x0560); write_nic_word(dev, 0x374, 0x0DA4); @@ -1035,8 +999,8 @@ MacConfig_85BASIC( write_nic_word(dev, 0x378, 0x0560); write_nic_word(dev, 0x37A, 0x0560); write_nic_word(dev, 0x37C, 0x00EC); - write_nic_word(dev, 0x37E, 0x00EC);//+edward - write_nic_byte(dev, 0x24E,0x01); + write_nic_word(dev, 0x37E, 0x00EC); /*+edward */ + write_nic_byte(dev, 0x24E, 0x01); } u8 @@ -1064,63 +1028,60 @@ ActUpdateChannelAccessSetting( u8 bFollowLegacySetting = 0; u8 u1bAIFS; - // - // - // TODO: We still don't know how to set up these registers, just follow WMAC to - // verify 8185B FPAG. - // - // - // Jong said CWmin/CWmax register are not functional in 8185B, - // so we shall fill channel access realted register into AC parameter registers, - // even in nQBss. - // - ChnlAccessSetting->SIFS_Timer = 0x22; // Suggested by Jong, 2005.12.08. - ChnlAccessSetting->DIFS_Timer = 0x1C; // 2006.06.02, by rcnjko. - ChnlAccessSetting->SlotTimeTimer = 9; // 2006.06.02, by rcnjko. - ChnlAccessSetting->EIFS_Timer = 0x5B; // Suggested by wcchu, it is the default value of EIFS register, 2005.12.08. - ChnlAccessSetting->CWminIndex = 3; // 2006.06.02, by rcnjko. - ChnlAccessSetting->CWmaxIndex = 7; // 2006.06.02, by rcnjko. + /* + + TODO: We still don't know how to set up these registers, just follow WMAC to + verify 8185B FPAG. + + + Jong said CWmin/CWmax register are not functional in 8185B, + so we shall fill channel access realted register into AC parameter registers, + even in nQBss. + */ + ChnlAccessSetting->SIFS_Timer = 0x22; /* Suggested by Jong, 2005.12.08. */ + ChnlAccessSetting->DIFS_Timer = 0x1C; /* 2006.06.02, by rcnjko. */ + ChnlAccessSetting->SlotTimeTimer = 9; /* 2006.06.02, by rcnjko. */ + ChnlAccessSetting->EIFS_Timer = 0x5B; /* Suggested by wcchu, it is the default value of EIFS register, 2005.12.08. */ + ChnlAccessSetting->CWminIndex = 3; /* 2006.06.02, by rcnjko. */ + ChnlAccessSetting->CWmaxIndex = 7; /* 2006.06.02, by rcnjko. */ write_nic_byte(dev, SIFS, ChnlAccessSetting->SIFS_Timer); - write_nic_byte(dev, SLOT, ChnlAccessSetting->SlotTimeTimer); // Rewrited from directly use PlatformEFIOWrite1Byte(), by Annie, 2006-03-29. + write_nic_byte(dev, SLOT, ChnlAccessSetting->SlotTimeTimer); /* Rewrited from directly use PlatformEFIOWrite1Byte(), by Annie, 2006-03-29. */ - u1bAIFS = aSifsTime + (2 * ChnlAccessSetting->SlotTimeTimer ); + u1bAIFS = aSifsTime + (2 * ChnlAccessSetting->SlotTimeTimer); write_nic_byte(dev, EIFS, ChnlAccessSetting->EIFS_Timer); - write_nic_byte(dev, AckTimeOutReg, 0x5B); // Suggested by wcchu, it is the default value of EIFS register, 2005.12.08. + write_nic_byte(dev, AckTimeOutReg, 0x5B); /* Suggested by wcchu, it is the default value of EIFS register, 2005.12.08. */ - { // Legacy 802.11. + { /* Legacy 802.11. */ bFollowLegacySetting = 1; } - // this setting is copied from rtl8187B. xiong-2006-11-13 - if(bFollowLegacySetting) - { - + /* this setting is copied from rtl8187B. xiong-2006-11-13 */ + if (bFollowLegacySetting) { - // - // Follow 802.11 seeting to AC parameter, all AC shall use the same parameter. - // 2005.12.01, by rcnjko. - // + /* + Follow 802.11 seeting to AC parameter, all AC shall use the same parameter. + 2005.12.01, by rcnjko. + */ AcParam.longData = 0; - AcParam.f.AciAifsn.f.AIFSN = 2; // Follow 802.11 DIFS. + AcParam.f.AciAifsn.f.AIFSN = 2; /* Follow 802.11 DIFS. */ AcParam.f.AciAifsn.f.ACM = 0; - AcParam.f.Ecw.f.ECWmin = ChnlAccessSetting->CWminIndex; // Follow 802.11 CWmin. - AcParam.f.Ecw.f.ECWmax = ChnlAccessSetting->CWmaxIndex; // Follow 802.11 CWmax. + AcParam.f.Ecw.f.ECWmin = ChnlAccessSetting->CWminIndex; /* Follow 802.11 CWmin. */ + AcParam.f.Ecw.f.ECWmax = ChnlAccessSetting->CWmaxIndex; /* Follow 802.11 CWmax. */ AcParam.f.TXOPLimit = 0; - //lzm reserved 080826 - // For turbo mode setting. port from 87B by Isaiah 2008-08-01 - if( ieee->current_network.Turbo_Enable == 1 ) + /* lzm reserved 080826 */ + /* For turbo mode setting. port from 87B by Isaiah 2008-08-01 */ + if (ieee->current_network.Turbo_Enable == 1) AcParam.f.TXOPLimit = 0x01FF; - // For 87SE with Intel 4965 Ad-Hoc mode have poor throughput (19MB) + /* For 87SE with Intel 4965 Ad-Hoc mode have poor throughput (19MB) */ if (ieee->iw_mode == IW_MODE_ADHOC) AcParam.f.TXOPLimit = 0x0020; - for(eACI = 0; eACI < AC_MAX; eACI++) - { + for (eACI = 0; eACI < AC_MAX; eACI++) { AcParam.f.AciAifsn.f.ACI = (u8)eACI; { PAC_PARAM pAcParam = (PAC_PARAM)(&AcParam); @@ -1128,85 +1089,81 @@ ActUpdateChannelAccessSetting( u8 u1bAIFS; u32 u4bAcParam; - // Retrive paramters to udpate. + /* Retrive paramters to udpate. */ eACI = pAcParam->f.AciAifsn.f.ACI; u1bAIFS = pAcParam->f.AciAifsn.f.AIFSN * ChnlAccessSetting->SlotTimeTimer + aSifsTime; - u4bAcParam = ( (((u32)(pAcParam->f.TXOPLimit)) << AC_PARAM_TXOP_LIMIT_OFFSET) | + u4bAcParam = ((((u32)(pAcParam->f.TXOPLimit)) << AC_PARAM_TXOP_LIMIT_OFFSET) | (((u32)(pAcParam->f.Ecw.f.ECWmax)) << AC_PARAM_ECW_MAX_OFFSET) | (((u32)(pAcParam->f.Ecw.f.ECWmin)) << AC_PARAM_ECW_MIN_OFFSET) | (((u32)u1bAIFS) << AC_PARAM_AIFS_OFFSET)); - switch(eACI) - { - case AC1_BK: - //write_nic_dword(dev, AC_BK_PARAM, u4bAcParam); - break; + switch (eACI) { + case AC1_BK: + /* write_nic_dword(dev, AC_BK_PARAM, u4bAcParam); */ + break; - case AC0_BE: - //write_nic_dword(dev, AC_BE_PARAM, u4bAcParam); - break; + case AC0_BE: + /* write_nic_dword(dev, AC_BK_PARAM, u4bAcParam); */ + break; - case AC2_VI: - //write_nic_dword(dev, AC_VI_PARAM, u4bAcParam); - break; + case AC2_VI: + /* write_nic_dword(dev, AC_BK_PARAM, u4bAcParam); */ + break; - case AC3_VO: - //write_nic_dword(dev, AC_VO_PARAM, u4bAcParam); - break; + case AC3_VO: + /* write_nic_dword(dev, AC_BK_PARAM, u4bAcParam); */ + break; - default: - DMESGW( "SetHwReg8185(): invalid ACI: %d !\n", eACI); - break; + default: + DMESGW("SetHwReg8185(): invalid ACI: %d !\n", eACI); + break; } - // Cehck ACM bit. - // If it is set, immediately set ACM control bit to downgrading AC for passing WMM testplan. Annie, 2005-12-13. + /* Cehck ACM bit. */ + /* If it is set, immediately set ACM control bit to downgrading AC for passing WMM testplan. Annie, 2005-12-13. */ { PACI_AIFSN pAciAifsn = (PACI_AIFSN)(&pAcParam->f.AciAifsn); AC_CODING eACI = pAciAifsn->f.ACI; - //modified Joseph - //for 8187B AsynIORead issue + /*modified Joseph */ + /*for 8187B AsynIORead issue */ u8 AcmCtrl = 0; - if( pAciAifsn->f.ACM ) - { // ACM bit is 1. - switch(eACI) - { - case AC0_BE: - AcmCtrl |= (BEQ_ACM_EN|BEQ_ACM_CTL|ACM_HW_EN); // or 0x21 - break; - - case AC2_VI: - AcmCtrl |= (VIQ_ACM_EN|VIQ_ACM_CTL|ACM_HW_EN); // or 0x42 - break; - - case AC3_VO: - AcmCtrl |= (VOQ_ACM_EN|VOQ_ACM_CTL|ACM_HW_EN); // or 0x84 - break; - - default: - DMESGW("SetHwReg8185(): [HW_VAR_ACM_CTRL] ACM set failed: eACI is %d\n", eACI ); - break; + if (pAciAifsn->f.ACM) { + /* ACM bit is 1. */ + switch (eACI) { + case AC0_BE: + AcmCtrl |= (BEQ_ACM_EN|BEQ_ACM_CTL|ACM_HW_EN); /* or 0x21 */ + break; + + case AC2_VI: + AcmCtrl |= (VIQ_ACM_EN|VIQ_ACM_CTL|ACM_HW_EN); /* or 0x42 */ + break; + + case AC3_VO: + AcmCtrl |= (VOQ_ACM_EN|VOQ_ACM_CTL|ACM_HW_EN); /* or 0x84 */ + break; + + default: + DMESGW("SetHwReg8185(): [HW_VAR_ACM_CTRL] ACM set failed: eACI is %d\n", eACI); + break; } - } - else - { // ACM bit is 0. - switch(eACI) - { - case AC0_BE: - AcmCtrl &= ( (~BEQ_ACM_EN) & (~BEQ_ACM_CTL) & (~ACM_HW_EN) ); // and 0xDE - break; - - case AC2_VI: - AcmCtrl &= ( (~VIQ_ACM_EN) & (~VIQ_ACM_CTL) & (~ACM_HW_EN) ); // and 0xBD - break; - - case AC3_VO: - AcmCtrl &= ( (~VOQ_ACM_EN) & (~VOQ_ACM_CTL) & (~ACM_HW_EN) ); // and 0x7B - break; - - default: - break; + } else { + /* ACM bit is 0. */ + switch (eACI) { + case AC0_BE: + AcmCtrl &= ((~BEQ_ACM_EN) & (~BEQ_ACM_CTL) & (~ACM_HW_EN)); /* and 0xDE */ + break; + + case AC2_VI: + AcmCtrl &= ((~VIQ_ACM_EN) & (~VIQ_ACM_CTL) & (~ACM_HW_EN)); /* and 0xBD */ + break; + + case AC3_VO: + AcmCtrl &= ((~VOQ_ACM_EN) & (~VOQ_ACM_CTL) & (~ACM_HW_EN)); /* and 0x7B */ + break; + + default: + break; } } write_nic_byte(dev, ACM_CONTROL, 0); @@ -1226,33 +1183,26 @@ ActSetWirelessMode8185( struct ieee80211_device *ieee = priv->ieee80211; u8 btSupportedWirelessMode = GetSupportedWirelessMode8185(dev); - if( (btWirelessMode & btSupportedWirelessMode) == 0 ) - { // Don't switch to unsupported wireless mode, 2006.02.15, by rcnjko. + if ((btWirelessMode & btSupportedWirelessMode) == 0) { + /* Don't switch to unsupported wireless mode, 2006.02.15, by rcnjko. */ DMESGW("ActSetWirelessMode8185(): WirelessMode(%d) is not supported (%d)!\n", btWirelessMode, btSupportedWirelessMode); return; } - // 1. Assign wireless mode to swtich if necessary. - if (btWirelessMode == WIRELESS_MODE_AUTO) - { - if((btSupportedWirelessMode & WIRELESS_MODE_A)) - { + /* 1. Assign wireless mode to swtich if necessary. */ + if (btWirelessMode == WIRELESS_MODE_AUTO) { + if ((btSupportedWirelessMode & WIRELESS_MODE_A)) { btWirelessMode = WIRELESS_MODE_A; - } - else if((btSupportedWirelessMode & WIRELESS_MODE_G)) - { - btWirelessMode = WIRELESS_MODE_G; - } - else if((btSupportedWirelessMode & WIRELESS_MODE_B)) - { - btWirelessMode = WIRELESS_MODE_B; - } - else - { - DMESGW("ActSetWirelessMode8185(): No valid wireless mode supported, btSupportedWirelessMode(%x)!!!\n", - btSupportedWirelessMode); - btWirelessMode = WIRELESS_MODE_B; + } else if (btSupportedWirelessMode & WIRELESS_MODE_G) { + btWirelessMode = WIRELESS_MODE_G; + + } else if ((btSupportedWirelessMode & WIRELESS_MODE_B)) { + btWirelessMode = WIRELESS_MODE_B; + } else { + DMESGW("ActSetWirelessMode8185(): No valid wireless mode supported, btSupportedWirelessMode(%x)!!!\n", + btSupportedWirelessMode); + btWirelessMode = WIRELESS_MODE_B; } } @@ -1260,17 +1210,16 @@ ActSetWirelessMode8185( * for example, refresh tables in omc8255, or change initial gain if necessary. * Nothing to do for Zebra to switch band. * Update current wireless mode if we swtich to specified band successfully. */ + ieee->mode = (WIRELESS_MODE)btWirelessMode; - // 3. Change related setting. - if( ieee->mode == WIRELESS_MODE_A ){ + /* 3. Change related setting. */ + if( ieee->mode == WIRELESS_MODE_A ) { DMESG("WIRELESS_MODE_A\n"); - } - else if( ieee->mode == WIRELESS_MODE_B ){ - DMESG("WIRELESS_MODE_B\n"); - } - else if( ieee->mode == WIRELESS_MODE_G ){ - DMESG("WIRELESS_MODE_G\n"); + } else if( ieee->mode == WIRELESS_MODE_B ) { + DMESG("WIRELESS_MODE_B\n"); + } else if( ieee->mode == WIRELESS_MODE_G ) { + DMESG("WIRELESS_MODE_G\n"); } ActUpdateChannelAccessSetting( dev, ieee->mode, &priv->ChannelAccessSetting); } @@ -1282,15 +1231,15 @@ void rtl8185b_irq_enable(struct net_device *dev) priv->irq_enabled = 1; write_nic_dword(dev, IMR, priv->IntrMask); } -//by amy for power save +/* by amy for power save */ void DrvIFIndicateDisassociation( struct net_device *dev, u16 reason ) { - // nothing is needed after disassociation request. -} + /* nothing is needed after disassociation request. */ + } void MgntDisconnectIBSS( struct net_device *dev @@ -1300,17 +1249,21 @@ MgntDisconnectIBSS( u8 i; DrvIFIndicateDisassociation(dev, unspec_reason); - for(i=0;i<6;i++) priv->ieee80211->current_network.bssid[i] = 0x55; - priv->ieee80211->state = IEEE80211_NOLINK; + for (i = 0; i < 6 ; i++) + priv->ieee80211->current_network.bssid[i] = 0x55; - //Stop Beacon. - // Vista add a Adhoc profile, HW radio off untill OID_DOT11_RESET_REQUEST - // Driver would set MSR=NO_LINK, then HW Radio ON, MgntQueue Stuck. - // Because Bcn DMA isn't complete, mgnt queue would stuck until Bcn packet send. - // Disable Beacon Queue Own bit, suggested by jong + priv->ieee80211->state = IEEE80211_NOLINK; + /* + Stop Beacon. + + Vista add a Adhoc profile, HW radio off untill OID_DOT11_RESET_REQUEST + Driver would set MSR=NO_LINK, then HW Radio ON, MgntQueue Stuck. + Because Bcn DMA isn't complete, mgnt queue would stuck until Bcn packet send. + + Disable Beacon Queue Own bit, suggested by jong */ ieee80211_stop_send_beacons(priv->ieee80211); priv->ieee80211->link_change(dev); @@ -1319,22 +1272,25 @@ MgntDisconnectIBSS( void MlmeDisassociateRequest( struct net_device *dev, - u8* asSta, - u8 asRsn + u8 *asSta, + u8 asRsn ) { struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev); u8 i; - SendDisassociation(priv->ieee80211, asSta, asRsn ); + SendDisassociation(priv->ieee80211, asSta, asRsn); - if( memcmp(priv->ieee80211->current_network.bssid, asSta, 6 ) == 0 ){ - //ShuChen TODO: change media status. - //ShuChen TODO: What to do when disassociate. + if (memcmp(priv->ieee80211->current_network.bssid, asSta, 6) == 0) { + /*ShuChen TODO: change media status. */ + /*ShuChen TODO: What to do when disassociate. */ DrvIFIndicateDisassociation(dev, unspec_reason); - for(i=0;i<6;i++) priv->ieee80211->current_network.bssid[i] = 0x22; + + for (i = 0; i < 6; i++) + priv->ieee80211->current_network.bssid[i] = 0x22; + ieee80211_disassociate(priv->ieee80211); } @@ -1348,15 +1304,15 @@ MgntDisconnectAP( { struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev); -// -// Commented out by rcnjko, 2005.01.27: -// I move SecClearAllKeys() to MgntActSet_802_11_DISASSOCIATE(). -// -// //2004/09/15, kcwu, the key should be cleared, or the new handshaking will not success + /* + Commented out by rcnjko, 2005.01.27: + I move SecClearAllKeys() to MgntActSet_802_11_DISASSOCIATE(). + + 2004/09/15, kcwu, the key should be cleared, or the new handshaking will not success - // In WPA WPA2 need to Clear all key ... because new key will set after new handshaking. - // 2004.10.11, by rcnjko. - MlmeDisassociateRequest( dev, priv->ieee80211->current_network.bssid, asRsn ); + In WPA WPA2 need to Clear all key ... because new key will set after new handshaking. + 2004.10.11, by rcnjko. */ + MlmeDisassociateRequest(dev, priv->ieee80211->current_network.bssid, asRsn); priv->ieee80211->state = IEEE80211_NOLINK; } @@ -1367,40 +1323,37 @@ MgntDisconnect( ) { struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev); - // - // Schedule an workitem to wake up for ps mode, 070109, by rcnjko. - // + /* + Schedule an workitem to wake up for ps mode, 070109, by rcnjko. + */ - if(IS_DOT11D_ENABLE(priv->ieee80211)) + if (IS_DOT11D_ENABLE(priv->ieee80211)) Dot11d_Reset(priv->ieee80211); - // In adhoc mode, update beacon frame. - if( priv->ieee80211->state == IEEE80211_LINKED ) - { - if( priv->ieee80211->iw_mode == IW_MODE_ADHOC ) - { + /* In adhoc mode, update beacon frame. */ + if (priv->ieee80211->state == IEEE80211_LINKED) { + if (priv->ieee80211->iw_mode == IW_MODE_ADHOC) MgntDisconnectIBSS(dev); - } - if( priv->ieee80211->iw_mode == IW_MODE_INFRA ) - { - // We clear key here instead of MgntDisconnectAP() because that - // MgntActSet_802_11_DISASSOCIATE() is an interface called by OS, - // e.g. OID_802_11_DISASSOCIATE in Windows while as MgntDisconnectAP() is - // used to handle disassociation related things to AP, e.g. send Disassoc - // frame to AP. 2005.01.27, by rcnjko. + + if (priv->ieee80211->iw_mode == IW_MODE_INFRA) { + /* We clear key here instead of MgntDisconnectAP() because that + MgntActSet_802_11_DISASSOCIATE() is an interface called by OS, + e.g. OID_802_11_DISASSOCIATE in Windows while as MgntDisconnectAP() is + used to handle disassociation related things to AP, e.g. send Disassoc + frame to AP. 2005.01.27, by rcnjko. */ MgntDisconnectAP(dev, asRsn); } - // Inidicate Disconnect, 2005.02.23, by rcnjko. + /* Inidicate Disconnect, 2005.02.23, by rcnjko. */ } return true; } -// -// Description: -// Chang RF Power State. -// Note that, only MgntActSet_RF_State() is allowed to set HW_VAR_RF_STATE. -// -// Assumption: -// PASSIVE LEVEL. -// +/* + Description: + Chang RF Power State. + Note that, only MgntActSet_RF_State() is allowed to set HW_VAR_RF_STATE. + + Assumption: + PASSIVE LEVEL. +*/ bool SetRFPowerState( struct net_device *dev, @@ -1410,10 +1363,8 @@ SetRFPowerState( struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev); bool bResult = false; - if(eRFPowerState == priv->eRFPowerState) - { + if (eRFPowerState == priv->eRFPowerState) return bResult; - } bResult = SetZebraRFPowerState8185(dev, eRFPowerState); @@ -1442,83 +1393,70 @@ MgntActSet_RF_State( struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev); bool bActionAllowed = false; bool bConnectBySSID = false; - RT_RF_POWER_STATE rtState; + RT_RF_POWER_STATE rtState; u16 RFWaitCounter = 0; unsigned long flag; - // - // Prevent the race condition of RF state change. By Bruce, 2007-11-28. - // Only one thread can change the RF state at one time, and others should wait to be executed. - // - while(true) - { - spin_lock_irqsave(&priv->rf_ps_lock,flag); - if(priv->RFChangeInProgress) - { - spin_unlock_irqrestore(&priv->rf_ps_lock,flag); - // Set RF after the previous action is done. - while(priv->RFChangeInProgress) - { - RFWaitCounter ++; - udelay(1000); // 1 ms - - // Wait too long, return FALSE to avoid to be stuck here. - if(RFWaitCounter > 1000) // 1sec - { + /* + Prevent the race condition of RF state change. By Bruce, 2007-11-28. + Only one thread can change the RF state at one time, and others should wait to be executed. + */ + while (true) { + spin_lock_irqsave(&priv->rf_ps_lock, flag); + if (priv->RFChangeInProgress) { + spin_unlock_irqrestore(&priv->rf_ps_lock, flag); + /* Set RF after the previous action is done. */ + while (priv->RFChangeInProgress) { + RFWaitCounter++; + udelay(1000); /* 1 ms */ + + /* Wait too long, return FALSE to avoid to be stuck here. */ + if (RFWaitCounter > 1000) { /* 1sec */ printk("MgntActSet_RF_State(): Wait too long to set RF\n"); - // TODO: Reset RF state? + /* TODO: Reset RF state? */ return false; } } - } - else - { + } else { priv->RFChangeInProgress = true; - spin_unlock_irqrestore(&priv->rf_ps_lock,flag); + spin_unlock_irqrestore(&priv->rf_ps_lock, flag); break; } } rtState = priv->eRFPowerState; - switch(StateToSet) - { + switch (StateToSet) { case eRfOn: - // - // Turn On RF no matter the IPS setting because we need to update the RF state to Ndis under Vista, or - // the Windows does not allow the driver to perform site survey any more. By Bruce, 2007-10-02. - // + /* + Turn On RF no matter the IPS setting because we need to update the RF state to Ndis under Vista, or + the Windows does not allow the driver to perform site survey any more. By Bruce, 2007-10-02. + */ priv->RfOffReason &= (~ChangeSource); - if(! priv->RfOffReason) - { + if (!priv->RfOffReason) { priv->RfOffReason = 0; bActionAllowed = true; - if(rtState == eRfOff && ChangeSource >=RF_CHANGE_BY_HW && !priv->bInHctTest) - { + if (rtState == eRfOff && ChangeSource >= RF_CHANGE_BY_HW && !priv->bInHctTest) bConnectBySSID = true; - } - } - else - ; + + } else + ; break; case eRfOff: - // 070125, rcnjko: we always keep connected in AP mode. + /* 070125, rcnjko: we always keep connected in AP mode. */ - if (priv->RfOffReason > RF_CHANGE_BY_IPS) - { - // - // 060808, Annie: - // Disconnect to current BSS when radio off. Asked by QuanTa. - // - - // - // Calling MgntDisconnect() instead of MgntActSet_802_11_DISASSOCIATE(), - // because we do NOT need to set ssid to dummy ones. - // - MgntDisconnect( dev, disas_lv_ss ); - - // Clear content of bssDesc[] and bssDesc4Query[] to avoid reporting old bss to UI. + if (priv->RfOffReason > RF_CHANGE_BY_IPS) { + /* + 060808, Annie: + Disconnect to current BSS when radio off. Asked by QuanTa. + + Calling MgntDisconnect() instead of MgntActSet_802_11_DISASSOCIATE(), + because we do NOT need to set ssid to dummy ones. + */ + MgntDisconnect(dev, disas_lv_ss); + + /* Clear content of bssDesc[] and bssDesc4Query[] to avoid reporting old bss to UI. */ } priv->RfOffReason |= ChangeSource; @@ -1532,31 +1470,27 @@ MgntActSet_RF_State( break; } - if(bActionAllowed) - { - // Config HW to the specified mode. + if (bActionAllowed) { + /* Config HW to the specified mode. */ SetRFPowerState(dev, StateToSet); - // Turn on RF. - if(StateToSet == eRfOn) - { + /* Turn on RF. */ + if (StateToSet == eRfOn) { HalEnableRx8185Dummy(dev); - if(bConnectBySSID) - { - // by amy not supported + if (bConnectBySSID) { + /* by amy not supported */ } } - // Turn off RF. - else if(StateToSet == eRfOff) - { + /* Turn off RF. */ + else if (StateToSet == eRfOff) HalDisableRx8185Dummy(dev); - } + } - // Release RF spinlock - spin_lock_irqsave(&priv->rf_ps_lock,flag); + /* Release RF spinlock */ + spin_lock_irqsave(&priv->rf_ps_lock, flag); priv->RFChangeInProgress = false; - spin_unlock_irqrestore(&priv->rf_ps_lock,flag); + spin_unlock_irqrestore(&priv->rf_ps_lock, flag); return bActionAllowed; } void @@ -1565,28 +1499,28 @@ InactivePowerSave( ) { struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev); - // - // This flag "bSwRfProcessing", indicates the status of IPS procedure, should be set if the IPS workitem - // is really scheduled. - // The old code, sets this flag before scheduling the IPS workitem and however, at the same time the - // previous IPS workitem did not end yet, fails to schedule the current workitem. Thus, bSwRfProcessing - // blocks the IPS procedure of switching RF. - // + /* + This flag "bSwRfProcessing", indicates the status of IPS procedure, should be set if the IPS workitem + is really scheduled. + The old code, sets this flag before scheduling the IPS workitem and however, at the same time the + previous IPS workitem did not end yet, fails to schedule the current workitem. Thus, bSwRfProcessing + blocks the IPS procedure of switching RF. + */ priv->bSwRfProcessing = true; MgntActSet_RF_State(dev, priv->eInactivePowerState, RF_CHANGE_BY_IPS); - // - // To solve CAM values miss in RF OFF, rewrite CAM values after RF ON. By Bruce, 2007-09-20. - // + /* + To solve CAM values miss in RF OFF, rewrite CAM values after RF ON. By Bruce, 2007-09-20. + */ priv->bSwRfProcessing = false; } -// -// Description: -// Enter the inactive power save mode. RF will be off -// +/* + Description: + Enter the inactive power save mode. RF will be off +*/ void IPSEnter( struct net_device *dev @@ -1594,21 +1528,19 @@ IPSEnter( { struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev); RT_RF_POWER_STATE rtState; - if (priv->bInactivePs) - { + if (priv->bInactivePs) { rtState = priv->eRFPowerState; - // - // Do not enter IPS in the following conditions: - // (1) RF is already OFF or Sleep - // (2) bSwRfProcessing (indicates the IPS is still under going) - // (3) Connectted (only disconnected can trigger IPS) - // (4) IBSS (send Beacon) - // (5) AP mode (send Beacon) - // + /* + Do not enter IPS in the following conditions: + (1) RF is already OFF or Sleep + (2) bSwRfProcessing (indicates the IPS is still under going) + (3) Connectted (only disconnected can trigger IPS) + (4) IBSS (send Beacon) + (5) AP mode (send Beacon) + */ if (rtState == eRfOn && !priv->bSwRfProcessing - && (priv->ieee80211->state != IEEE80211_LINKED )) - { + && (priv->ieee80211->state != IEEE80211_LINKED)) { priv->eInactivePowerState = eRfOff; InactivePowerSave(dev); } @@ -1621,11 +1553,9 @@ IPSLeave( { struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev); RT_RF_POWER_STATE rtState; - if (priv->bInactivePs) - { + if (priv->bInactivePs) { rtState = priv->eRFPowerState; - if ((rtState == eRfOff || rtState == eRfSleep) && (!priv->bSwRfProcessing) && priv->RfOffReason <= RF_CHANGE_BY_IPS) - { + if ((rtState == eRfOff || rtState == eRfSleep) && (!priv->bSwRfProcessing) && priv->RfOffReason <= RF_CHANGE_BY_IPS) { priv->eInactivePowerState = eRfOn; InactivePowerSave(dev); } @@ -1634,7 +1564,7 @@ IPSLeave( void rtl8185b_adapter_start(struct net_device *dev) { - struct r8180_priv *priv = ieee80211_priv(dev); + struct r8180_priv *priv = ieee80211_priv(dev); struct ieee80211_device *ieee = priv->ieee80211; u8 SupportedWirelessMode; @@ -1645,141 +1575,133 @@ void rtl8185b_adapter_start(struct net_device *dev) u8 TmpU1b; u8 btPSR; - write_nic_byte(dev,0x24e, (BIT5|BIT6|BIT0)); + write_nic_byte(dev, 0x24e, (BIT5|BIT6|BIT0)); rtl8180_reset(dev); priv->dma_poll_mask = 0; priv->dma_poll_stop_mask = 0; HwConfigureRTL8185(dev); - write_nic_dword(dev, MAC0, ((u32*)dev->dev_addr)[0]); - write_nic_word(dev, MAC4, ((u32*)dev->dev_addr)[1] & 0xffff ); - write_nic_byte(dev, MSR, read_nic_byte(dev, MSR) & 0xf3); // default network type to 'No Link' + write_nic_dword(dev, MAC0, ((u32 *)dev->dev_addr)[0]); + write_nic_word(dev, MAC4, ((u32 *)dev->dev_addr)[1] & 0xffff); + write_nic_byte(dev, MSR, read_nic_byte(dev, MSR) & 0xf3); /* default network type to 'No Link' */ write_nic_word(dev, BcnItv, 100); write_nic_word(dev, AtimWnd, 2); PlatformIOWrite2Byte(dev, FEMR, 0xFFFF); write_nic_byte(dev, WPA_CONFIG, 0); MacConfig_85BASIC(dev); - // Override the RFSW_CTRL (MAC offset 0x272-0x273), 2006.06.07, by rcnjko. - // BT_DEMO_BOARD type + /* Override the RFSW_CTRL (MAC offset 0x272-0x273), 2006.06.07, by rcnjko. */ + /* BT_DEMO_BOARD type */ PlatformIOWrite2Byte(dev, RFSW_CTRL, 0x569a); - //----------------------------------------------------------------------------- - // Set up PHY related. - //----------------------------------------------------------------------------- - // Enable Config3.PARAM_En to revise AnaaParm. - write_nic_byte(dev, CR9346, 0xc0); // enable config register write + /* + ----------------------------------------------------------------------------- + Set up PHY related. + ----------------------------------------------------------------------------- + */ + /* Enable Config3.PARAM_En to revise AnaaParm. */ + write_nic_byte(dev, CR9346, 0xc0); /* enable config register write */ tmpu8 = read_nic_byte(dev, CONFIG3); - write_nic_byte(dev, CONFIG3, (tmpu8 |CONFIG3_PARM_En) ); - // Turn on Analog power. - // Asked for by William, otherwise, MAC 3-wire can't work, 2006.06.27, by rcnjko. + write_nic_byte(dev, CONFIG3, (tmpu8 | CONFIG3_PARM_En)); + /* Turn on Analog power. */ + /* Asked for by William, otherwise, MAC 3-wire can't work, 2006.06.27, by rcnjko. */ write_nic_dword(dev, ANAPARAM2, ANAPARM2_ASIC_ON); write_nic_dword(dev, ANAPARAM, ANAPARM_ASIC_ON); write_nic_word(dev, ANAPARAM3, 0x0010); write_nic_byte(dev, CONFIG3, tmpu8); write_nic_byte(dev, CR9346, 0x00); - // enable EEM0 and EEM1 in 9346CR + /* enable EEM0 and EEM1 in 9346CR */ btCR9346 = read_nic_byte(dev, CR9346); - write_nic_byte(dev, CR9346, (btCR9346|0xC0) ); + write_nic_byte(dev, CR9346, (btCR9346 | 0xC0)); - // B cut use LED1 to control HW RF on/off + /* B cut use LED1 to control HW RF on/off */ TmpU1b = read_nic_byte(dev, CONFIG5); TmpU1b = TmpU1b & ~BIT3; - write_nic_byte(dev,CONFIG5, TmpU1b); + write_nic_byte(dev, CONFIG5, TmpU1b); - // disable EEM0 and EEM1 in 9346CR + /* disable EEM0 and EEM1 in 9346CR */ btCR9346 &= ~(0xC0); write_nic_byte(dev, CR9346, btCR9346); - //Enable Led (suggested by Jong) - // B-cut RF Radio on/off 5e[3]=0 + /* Enable Led (suggested by Jong) */ + /* B-cut RF Radio on/off 5e[3]=0 */ btPSR = read_nic_byte(dev, PSR); write_nic_byte(dev, PSR, (btPSR | BIT3)); - // setup initial timing for RFE. + /* setup initial timing for RFE. */ write_nic_word(dev, RFPinsOutput, 0x0480); SetOutputEnableOfRfPins(dev); write_nic_word(dev, RFPinsSelect, 0x2488); - // PHY config. + /* PHY config. */ PhyConfig8185(dev); - // We assume RegWirelessMode has already been initialized before, - // however, we has to validate the wireless mode here and provide a - // reasonable initialized value if necessary. 2005.01.13, by rcnjko. + /* + We assume RegWirelessMode has already been initialized before, + however, we has to validate the wireless mode here and provide a + reasonable initialized value if necessary. 2005.01.13, by rcnjko. + */ SupportedWirelessMode = GetSupportedWirelessMode8185(dev); - if( (ieee->mode != WIRELESS_MODE_B) && + if ((ieee->mode != WIRELESS_MODE_B) && (ieee->mode != WIRELESS_MODE_G) && (ieee->mode != WIRELESS_MODE_A) && - (ieee->mode != WIRELESS_MODE_AUTO)) - { // It should be one of B, G, A, or AUTO. + (ieee->mode != WIRELESS_MODE_AUTO)) { + /* It should be one of B, G, A, or AUTO. */ bInvalidWirelessMode = 1; - } - else - { // One of B, G, A, or AUTO. - // Check if the wireless mode is supported by RF. - if( (ieee->mode != WIRELESS_MODE_AUTO) && - (ieee->mode & SupportedWirelessMode) == 0 ) - { + } else { + /* One of B, G, A, or AUTO. */ + /* Check if the wireless mode is supported by RF. */ + if ((ieee->mode != WIRELESS_MODE_AUTO) && + (ieee->mode & SupportedWirelessMode) == 0) { bInvalidWirelessMode = 1; } } - if(bInvalidWirelessMode || ieee->mode==WIRELESS_MODE_AUTO) - { // Auto or other invalid value. - // Assigne a wireless mode to initialize. - if((SupportedWirelessMode & WIRELESS_MODE_A)) - { + if (bInvalidWirelessMode || ieee->mode == WIRELESS_MODE_AUTO) { + /* Auto or other invalid value. */ + /* Assigne a wireless mode to initialize. */ + if ((SupportedWirelessMode & WIRELESS_MODE_A)) { InitWirelessMode = WIRELESS_MODE_A; - } - else if((SupportedWirelessMode & WIRELESS_MODE_G)) - { + } else if ((SupportedWirelessMode & WIRELESS_MODE_G)) { InitWirelessMode = WIRELESS_MODE_G; - } - else if((SupportedWirelessMode & WIRELESS_MODE_B)) - { + } else if ((SupportedWirelessMode & WIRELESS_MODE_B)) { InitWirelessMode = WIRELESS_MODE_B; - } - else - { + } else { DMESGW("InitializeAdapter8185(): No valid wireless mode supported, SupportedWirelessMode(%x)!!!\n", SupportedWirelessMode); InitWirelessMode = WIRELESS_MODE_B; } - // Initialize RegWirelessMode if it is not a valid one. - if(bInvalidWirelessMode) - { + /* Initialize RegWirelessMode if it is not a valid one. */ + if (bInvalidWirelessMode) ieee->mode = (WIRELESS_MODE)InitWirelessMode; - } - } - else - { // One of B, G, A. + + } else { + /* One of B, G, A. */ InitWirelessMode = ieee->mode; } -//by amy for power save +/* by amy for power save */ priv->eRFPowerState = eRfOff; priv->RfOffReason = 0; { MgntActSet_RF_State(dev, eRfOn, 0); } - // - // If inactive power mode is enabled, disable rf while in disconnected state. - // + /* + If inactive power mode is enabled, disable rf while in disconnected state. + */ if (priv->bInactivePs) - { - MgntActSet_RF_State(dev,eRfOff, RF_CHANGE_BY_IPS); - } -//by amy for power save + MgntActSet_RF_State(dev , eRfOff, RF_CHANGE_BY_IPS); + +/* by amy for power save */ ActSetWirelessMode8185(dev, (u8)(InitWirelessMode)); - //----------------------------------------------------------------------------- + /* ----------------------------------------------------------------------------- */ rtl8185b_irq_enable(dev); netif_start_queue(dev); - } + } void rtl8185b_rx_enable(struct net_device *dev) { @@ -1787,27 +1709,29 @@ void rtl8185b_rx_enable(struct net_device *dev) /* for now we accept data, management & ctl frame*/ struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev); - if (dev->flags & IFF_PROMISC) DMESG ("NIC in promisc mode"); - if(priv->ieee80211->iw_mode == IW_MODE_MONITOR || \ - dev->flags & IFF_PROMISC){ - priv->ReceiveConfig = priv->ReceiveConfig & (~RCR_APM); + if (dev->flags & IFF_PROMISC) + DMESG("NIC in promisc mode"); + + if (priv->ieee80211->iw_mode == IW_MODE_MONITOR || \ + dev->flags & IFF_PROMISC) { + priv->ReceiveConfig = priv->ReceiveConfig & (~RCR_APM); priv->ReceiveConfig = priv->ReceiveConfig | RCR_AAP; } - if(priv->ieee80211->iw_mode == IW_MODE_MONITOR){ + if (priv->ieee80211->iw_mode == IW_MODE_MONITOR) priv->ReceiveConfig = priv->ReceiveConfig | RCR_ACF | RCR_APWRMGT | RCR_AICV; - } - if( priv->crcmon == 1 && priv->ieee80211->iw_mode == IW_MODE_MONITOR) + + if (priv->crcmon == 1 && priv->ieee80211->iw_mode == IW_MODE_MONITOR) priv->ReceiveConfig = priv->ReceiveConfig | RCR_ACRC32; write_nic_dword(dev, RCR, priv->ReceiveConfig); fix_rx_fifo(dev); - cmd=read_nic_byte(dev,CMD); - write_nic_byte(dev,CMD,cmd | (1<