]>
Commit | Line | Data |
---|---|---|
1b8873a0 JI |
1 | #undef DEBUG |
2 | ||
3 | /* | |
4 | * ARM performance counter support. | |
5 | * | |
6 | * Copyright (C) 2009 picoChip Designs, Ltd., Jamie Iles | |
7 | * | |
796d1295 JP |
8 | * ARMv7 support: Jean Pihet <jpihet@mvista.com> |
9 | * 2010 (c) MontaVista Software, LLC. | |
10 | * | |
1b8873a0 JI |
11 | * This code is based on the sparc64 perf event code, which is in turn based |
12 | * on the x86 code. Callchain code is based on the ARM OProfile backtrace | |
13 | * code. | |
14 | */ | |
15 | #define pr_fmt(fmt) "hw perfevents: " fmt | |
16 | ||
17 | #include <linux/interrupt.h> | |
18 | #include <linux/kernel.h> | |
181193f3 | 19 | #include <linux/module.h> |
1b8873a0 | 20 | #include <linux/perf_event.h> |
49c006b9 | 21 | #include <linux/platform_device.h> |
1b8873a0 JI |
22 | #include <linux/spinlock.h> |
23 | #include <linux/uaccess.h> | |
24 | ||
25 | #include <asm/cputype.h> | |
26 | #include <asm/irq.h> | |
27 | #include <asm/irq_regs.h> | |
28 | #include <asm/pmu.h> | |
29 | #include <asm/stacktrace.h> | |
30 | ||
49c006b9 | 31 | static struct platform_device *pmu_device; |
1b8873a0 JI |
32 | |
33 | /* | |
34 | * Hardware lock to serialize accesses to PMU registers. Needed for the | |
35 | * read/modify/write sequences. | |
36 | */ | |
37 | DEFINE_SPINLOCK(pmu_lock); | |
38 | ||
39 | /* | |
40 | * ARMv6 supports a maximum of 3 events, starting from index 1. If we add | |
41 | * another platform that supports more, we need to increase this to be the | |
42 | * largest of all platforms. | |
796d1295 JP |
43 | * |
44 | * ARMv7 supports up to 32 events: | |
45 | * cycle counter CCNT + 31 events counters CNT0..30. | |
46 | * Cortex-A8 has 1+4 counters, Cortex-A9 has 1+6 counters. | |
1b8873a0 | 47 | */ |
796d1295 | 48 | #define ARMPMU_MAX_HWEVENTS 33 |
1b8873a0 JI |
49 | |
50 | /* The events for a given CPU. */ | |
51 | struct cpu_hw_events { | |
52 | /* | |
53 | * The events that are active on the CPU for the given index. Index 0 | |
54 | * is reserved. | |
55 | */ | |
56 | struct perf_event *events[ARMPMU_MAX_HWEVENTS]; | |
57 | ||
58 | /* | |
59 | * A 1 bit for an index indicates that the counter is being used for | |
60 | * an event. A 0 means that the counter can be used. | |
61 | */ | |
62 | unsigned long used_mask[BITS_TO_LONGS(ARMPMU_MAX_HWEVENTS)]; | |
63 | ||
64 | /* | |
65 | * A 1 bit for an index indicates that the counter is actively being | |
66 | * used. | |
67 | */ | |
68 | unsigned long active_mask[BITS_TO_LONGS(ARMPMU_MAX_HWEVENTS)]; | |
69 | }; | |
70 | DEFINE_PER_CPU(struct cpu_hw_events, cpu_hw_events); | |
71 | ||
181193f3 WD |
72 | /* PMU names. */ |
73 | static const char *arm_pmu_names[] = { | |
74 | [ARM_PERF_PMU_ID_XSCALE1] = "xscale1", | |
75 | [ARM_PERF_PMU_ID_XSCALE2] = "xscale2", | |
76 | [ARM_PERF_PMU_ID_V6] = "v6", | |
77 | [ARM_PERF_PMU_ID_V6MP] = "v6mpcore", | |
78 | [ARM_PERF_PMU_ID_CA8] = "ARMv7 Cortex-A8", | |
79 | [ARM_PERF_PMU_ID_CA9] = "ARMv7 Cortex-A9", | |
80 | }; | |
81 | ||
1b8873a0 | 82 | struct arm_pmu { |
181193f3 | 83 | enum arm_perf_pmu_ids id; |
1b8873a0 JI |
84 | irqreturn_t (*handle_irq)(int irq_num, void *dev); |
85 | void (*enable)(struct hw_perf_event *evt, int idx); | |
86 | void (*disable)(struct hw_perf_event *evt, int idx); | |
87 | int (*event_map)(int evt); | |
88 | u64 (*raw_event)(u64); | |
89 | int (*get_event_idx)(struct cpu_hw_events *cpuc, | |
90 | struct hw_perf_event *hwc); | |
91 | u32 (*read_counter)(int idx); | |
92 | void (*write_counter)(int idx, u32 val); | |
93 | void (*start)(void); | |
94 | void (*stop)(void); | |
95 | int num_events; | |
96 | u64 max_period; | |
97 | }; | |
98 | ||
99 | /* Set at runtime when we know what CPU type we are. */ | |
100 | static const struct arm_pmu *armpmu; | |
101 | ||
181193f3 WD |
102 | enum arm_perf_pmu_ids |
103 | armpmu_get_pmu_id(void) | |
104 | { | |
105 | int id = -ENODEV; | |
106 | ||
107 | if (armpmu != NULL) | |
108 | id = armpmu->id; | |
109 | ||
110 | return id; | |
111 | } | |
112 | EXPORT_SYMBOL_GPL(armpmu_get_pmu_id); | |
113 | ||
929f5199 WD |
114 | int |
115 | armpmu_get_max_events(void) | |
116 | { | |
117 | int max_events = 0; | |
118 | ||
119 | if (armpmu != NULL) | |
120 | max_events = armpmu->num_events; | |
121 | ||
122 | return max_events; | |
123 | } | |
124 | EXPORT_SYMBOL_GPL(armpmu_get_max_events); | |
125 | ||
3bf101ba MF |
126 | int perf_num_counters(void) |
127 | { | |
128 | return armpmu_get_max_events(); | |
129 | } | |
130 | EXPORT_SYMBOL_GPL(perf_num_counters); | |
131 | ||
1b8873a0 JI |
132 | #define HW_OP_UNSUPPORTED 0xFFFF |
133 | ||
134 | #define C(_x) \ | |
135 | PERF_COUNT_HW_CACHE_##_x | |
136 | ||
137 | #define CACHE_OP_UNSUPPORTED 0xFFFF | |
138 | ||
139 | static unsigned armpmu_perf_cache_map[PERF_COUNT_HW_CACHE_MAX] | |
140 | [PERF_COUNT_HW_CACHE_OP_MAX] | |
141 | [PERF_COUNT_HW_CACHE_RESULT_MAX]; | |
142 | ||
143 | static int | |
144 | armpmu_map_cache_event(u64 config) | |
145 | { | |
146 | unsigned int cache_type, cache_op, cache_result, ret; | |
147 | ||
148 | cache_type = (config >> 0) & 0xff; | |
149 | if (cache_type >= PERF_COUNT_HW_CACHE_MAX) | |
150 | return -EINVAL; | |
151 | ||
152 | cache_op = (config >> 8) & 0xff; | |
153 | if (cache_op >= PERF_COUNT_HW_CACHE_OP_MAX) | |
154 | return -EINVAL; | |
155 | ||
156 | cache_result = (config >> 16) & 0xff; | |
157 | if (cache_result >= PERF_COUNT_HW_CACHE_RESULT_MAX) | |
158 | return -EINVAL; | |
159 | ||
160 | ret = (int)armpmu_perf_cache_map[cache_type][cache_op][cache_result]; | |
161 | ||
162 | if (ret == CACHE_OP_UNSUPPORTED) | |
163 | return -ENOENT; | |
164 | ||
165 | return ret; | |
166 | } | |
167 | ||
168 | static int | |
169 | armpmu_event_set_period(struct perf_event *event, | |
170 | struct hw_perf_event *hwc, | |
171 | int idx) | |
172 | { | |
e7850595 | 173 | s64 left = local64_read(&hwc->period_left); |
1b8873a0 JI |
174 | s64 period = hwc->sample_period; |
175 | int ret = 0; | |
176 | ||
177 | if (unlikely(left <= -period)) { | |
178 | left = period; | |
e7850595 | 179 | local64_set(&hwc->period_left, left); |
1b8873a0 JI |
180 | hwc->last_period = period; |
181 | ret = 1; | |
182 | } | |
183 | ||
184 | if (unlikely(left <= 0)) { | |
185 | left += period; | |
e7850595 | 186 | local64_set(&hwc->period_left, left); |
1b8873a0 JI |
187 | hwc->last_period = period; |
188 | ret = 1; | |
189 | } | |
190 | ||
191 | if (left > (s64)armpmu->max_period) | |
192 | left = armpmu->max_period; | |
193 | ||
e7850595 | 194 | local64_set(&hwc->prev_count, (u64)-left); |
1b8873a0 JI |
195 | |
196 | armpmu->write_counter(idx, (u64)(-left) & 0xffffffff); | |
197 | ||
198 | perf_event_update_userpage(event); | |
199 | ||
200 | return ret; | |
201 | } | |
202 | ||
203 | static u64 | |
204 | armpmu_event_update(struct perf_event *event, | |
205 | struct hw_perf_event *hwc, | |
206 | int idx) | |
207 | { | |
208 | int shift = 64 - 32; | |
209 | s64 prev_raw_count, new_raw_count; | |
446a5a8b | 210 | u64 delta; |
1b8873a0 JI |
211 | |
212 | again: | |
e7850595 | 213 | prev_raw_count = local64_read(&hwc->prev_count); |
1b8873a0 JI |
214 | new_raw_count = armpmu->read_counter(idx); |
215 | ||
e7850595 | 216 | if (local64_cmpxchg(&hwc->prev_count, prev_raw_count, |
1b8873a0 JI |
217 | new_raw_count) != prev_raw_count) |
218 | goto again; | |
219 | ||
220 | delta = (new_raw_count << shift) - (prev_raw_count << shift); | |
221 | delta >>= shift; | |
222 | ||
e7850595 PZ |
223 | local64_add(delta, &event->count); |
224 | local64_sub(delta, &hwc->period_left); | |
1b8873a0 JI |
225 | |
226 | return new_raw_count; | |
227 | } | |
228 | ||
229 | static void | |
a4eaf7f1 | 230 | armpmu_read(struct perf_event *event) |
1b8873a0 | 231 | { |
1b8873a0 | 232 | struct hw_perf_event *hwc = &event->hw; |
1b8873a0 | 233 | |
a4eaf7f1 PZ |
234 | /* Don't read disabled counters! */ |
235 | if (hwc->idx < 0) | |
236 | return; | |
1b8873a0 | 237 | |
a4eaf7f1 | 238 | armpmu_event_update(event, hwc, hwc->idx); |
1b8873a0 JI |
239 | } |
240 | ||
241 | static void | |
a4eaf7f1 | 242 | armpmu_stop(struct perf_event *event, int flags) |
1b8873a0 JI |
243 | { |
244 | struct hw_perf_event *hwc = &event->hw; | |
245 | ||
a4eaf7f1 | 246 | if (!armpmu) |
1b8873a0 JI |
247 | return; |
248 | ||
a4eaf7f1 PZ |
249 | /* |
250 | * ARM pmu always has to update the counter, so ignore | |
251 | * PERF_EF_UPDATE, see comments in armpmu_start(). | |
252 | */ | |
253 | if (!(hwc->state & PERF_HES_STOPPED)) { | |
254 | armpmu->disable(hwc, hwc->idx); | |
255 | barrier(); /* why? */ | |
256 | armpmu_event_update(event, hwc, hwc->idx); | |
257 | hwc->state |= PERF_HES_STOPPED | PERF_HES_UPTODATE; | |
258 | } | |
1b8873a0 JI |
259 | } |
260 | ||
261 | static void | |
a4eaf7f1 | 262 | armpmu_start(struct perf_event *event, int flags) |
1b8873a0 JI |
263 | { |
264 | struct hw_perf_event *hwc = &event->hw; | |
265 | ||
a4eaf7f1 PZ |
266 | if (!armpmu) |
267 | return; | |
268 | ||
269 | /* | |
270 | * ARM pmu always has to reprogram the period, so ignore | |
271 | * PERF_EF_RELOAD, see the comment below. | |
272 | */ | |
273 | if (flags & PERF_EF_RELOAD) | |
274 | WARN_ON_ONCE(!(hwc->state & PERF_HES_UPTODATE)); | |
275 | ||
276 | hwc->state = 0; | |
1b8873a0 JI |
277 | /* |
278 | * Set the period again. Some counters can't be stopped, so when we | |
a4eaf7f1 | 279 | * were stopped we simply disabled the IRQ source and the counter |
1b8873a0 JI |
280 | * may have been left counting. If we don't do this step then we may |
281 | * get an interrupt too soon or *way* too late if the overflow has | |
282 | * happened since disabling. | |
283 | */ | |
284 | armpmu_event_set_period(event, hwc, hwc->idx); | |
285 | armpmu->enable(hwc, hwc->idx); | |
286 | } | |
287 | ||
a4eaf7f1 PZ |
288 | static void |
289 | armpmu_del(struct perf_event *event, int flags) | |
290 | { | |
291 | struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events); | |
292 | struct hw_perf_event *hwc = &event->hw; | |
293 | int idx = hwc->idx; | |
294 | ||
295 | WARN_ON(idx < 0); | |
296 | ||
297 | clear_bit(idx, cpuc->active_mask); | |
298 | armpmu_stop(event, PERF_EF_UPDATE); | |
299 | cpuc->events[idx] = NULL; | |
300 | clear_bit(idx, cpuc->used_mask); | |
301 | ||
302 | perf_event_update_userpage(event); | |
303 | } | |
304 | ||
1b8873a0 | 305 | static int |
a4eaf7f1 | 306 | armpmu_add(struct perf_event *event, int flags) |
1b8873a0 JI |
307 | { |
308 | struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events); | |
309 | struct hw_perf_event *hwc = &event->hw; | |
310 | int idx; | |
311 | int err = 0; | |
312 | ||
33696fc0 | 313 | perf_pmu_disable(event->pmu); |
24cd7f54 | 314 | |
1b8873a0 JI |
315 | /* If we don't have a space for the counter then finish early. */ |
316 | idx = armpmu->get_event_idx(cpuc, hwc); | |
317 | if (idx < 0) { | |
318 | err = idx; | |
319 | goto out; | |
320 | } | |
321 | ||
322 | /* | |
323 | * If there is an event in the counter we are going to use then make | |
324 | * sure it is disabled. | |
325 | */ | |
326 | event->hw.idx = idx; | |
327 | armpmu->disable(hwc, idx); | |
328 | cpuc->events[idx] = event; | |
329 | set_bit(idx, cpuc->active_mask); | |
330 | ||
a4eaf7f1 PZ |
331 | hwc->state = PERF_HES_STOPPED | PERF_HES_UPTODATE; |
332 | if (flags & PERF_EF_START) | |
333 | armpmu_start(event, PERF_EF_RELOAD); | |
1b8873a0 JI |
334 | |
335 | /* Propagate our changes to the userspace mapping. */ | |
336 | perf_event_update_userpage(event); | |
337 | ||
338 | out: | |
33696fc0 | 339 | perf_pmu_enable(event->pmu); |
1b8873a0 JI |
340 | return err; |
341 | } | |
342 | ||
b0a873eb | 343 | static struct pmu pmu; |
1b8873a0 JI |
344 | |
345 | static int | |
346 | validate_event(struct cpu_hw_events *cpuc, | |
347 | struct perf_event *event) | |
348 | { | |
349 | struct hw_perf_event fake_event = event->hw; | |
350 | ||
65b4711f WD |
351 | if (event->pmu != &pmu || event->state <= PERF_EVENT_STATE_OFF) |
352 | return 1; | |
1b8873a0 JI |
353 | |
354 | return armpmu->get_event_idx(cpuc, &fake_event) >= 0; | |
355 | } | |
356 | ||
357 | static int | |
358 | validate_group(struct perf_event *event) | |
359 | { | |
360 | struct perf_event *sibling, *leader = event->group_leader; | |
361 | struct cpu_hw_events fake_pmu; | |
362 | ||
363 | memset(&fake_pmu, 0, sizeof(fake_pmu)); | |
364 | ||
365 | if (!validate_event(&fake_pmu, leader)) | |
366 | return -ENOSPC; | |
367 | ||
368 | list_for_each_entry(sibling, &leader->sibling_list, group_entry) { | |
369 | if (!validate_event(&fake_pmu, sibling)) | |
370 | return -ENOSPC; | |
371 | } | |
372 | ||
373 | if (!validate_event(&fake_pmu, event)) | |
374 | return -ENOSPC; | |
375 | ||
376 | return 0; | |
377 | } | |
378 | ||
379 | static int | |
380 | armpmu_reserve_hardware(void) | |
381 | { | |
49c006b9 | 382 | int i, err = -ENODEV, irq; |
1b8873a0 | 383 | |
49c006b9 WD |
384 | pmu_device = reserve_pmu(ARM_PMU_DEVICE_CPU); |
385 | if (IS_ERR(pmu_device)) { | |
1b8873a0 | 386 | pr_warning("unable to reserve pmu\n"); |
49c006b9 | 387 | return PTR_ERR(pmu_device); |
1b8873a0 JI |
388 | } |
389 | ||
49c006b9 | 390 | init_pmu(ARM_PMU_DEVICE_CPU); |
1b8873a0 | 391 | |
49c006b9 | 392 | if (pmu_device->num_resources < 1) { |
1b8873a0 JI |
393 | pr_err("no irqs for PMUs defined\n"); |
394 | return -ENODEV; | |
395 | } | |
396 | ||
49c006b9 WD |
397 | for (i = 0; i < pmu_device->num_resources; ++i) { |
398 | irq = platform_get_irq(pmu_device, i); | |
399 | if (irq < 0) | |
400 | continue; | |
401 | ||
402 | err = request_irq(irq, armpmu->handle_irq, | |
ddee87f2 WD |
403 | IRQF_DISABLED | IRQF_NOBALANCING, |
404 | "armpmu", NULL); | |
1b8873a0 | 405 | if (err) { |
49c006b9 WD |
406 | pr_warning("unable to request IRQ%d for ARM perf " |
407 | "counters\n", irq); | |
1b8873a0 JI |
408 | break; |
409 | } | |
410 | } | |
411 | ||
412 | if (err) { | |
49c006b9 WD |
413 | for (i = i - 1; i >= 0; --i) { |
414 | irq = platform_get_irq(pmu_device, i); | |
415 | if (irq >= 0) | |
416 | free_irq(irq, NULL); | |
417 | } | |
418 | release_pmu(pmu_device); | |
419 | pmu_device = NULL; | |
1b8873a0 JI |
420 | } |
421 | ||
422 | return err; | |
423 | } | |
424 | ||
425 | static void | |
426 | armpmu_release_hardware(void) | |
427 | { | |
49c006b9 | 428 | int i, irq; |
1b8873a0 | 429 | |
49c006b9 WD |
430 | for (i = pmu_device->num_resources - 1; i >= 0; --i) { |
431 | irq = platform_get_irq(pmu_device, i); | |
432 | if (irq >= 0) | |
433 | free_irq(irq, NULL); | |
434 | } | |
1b8873a0 JI |
435 | armpmu->stop(); |
436 | ||
49c006b9 WD |
437 | release_pmu(pmu_device); |
438 | pmu_device = NULL; | |
1b8873a0 JI |
439 | } |
440 | ||
441 | static atomic_t active_events = ATOMIC_INIT(0); | |
442 | static DEFINE_MUTEX(pmu_reserve_mutex); | |
443 | ||
444 | static void | |
445 | hw_perf_event_destroy(struct perf_event *event) | |
446 | { | |
447 | if (atomic_dec_and_mutex_lock(&active_events, &pmu_reserve_mutex)) { | |
448 | armpmu_release_hardware(); | |
449 | mutex_unlock(&pmu_reserve_mutex); | |
450 | } | |
451 | } | |
452 | ||
453 | static int | |
454 | __hw_perf_event_init(struct perf_event *event) | |
455 | { | |
456 | struct hw_perf_event *hwc = &event->hw; | |
457 | int mapping, err; | |
458 | ||
459 | /* Decode the generic type into an ARM event identifier. */ | |
460 | if (PERF_TYPE_HARDWARE == event->attr.type) { | |
461 | mapping = armpmu->event_map(event->attr.config); | |
462 | } else if (PERF_TYPE_HW_CACHE == event->attr.type) { | |
463 | mapping = armpmu_map_cache_event(event->attr.config); | |
464 | } else if (PERF_TYPE_RAW == event->attr.type) { | |
465 | mapping = armpmu->raw_event(event->attr.config); | |
466 | } else { | |
467 | pr_debug("event type %x not supported\n", event->attr.type); | |
468 | return -EOPNOTSUPP; | |
469 | } | |
470 | ||
471 | if (mapping < 0) { | |
472 | pr_debug("event %x:%llx not supported\n", event->attr.type, | |
473 | event->attr.config); | |
474 | return mapping; | |
475 | } | |
476 | ||
477 | /* | |
478 | * Check whether we need to exclude the counter from certain modes. | |
479 | * The ARM performance counters are on all of the time so if someone | |
480 | * has asked us for some excludes then we have to fail. | |
481 | */ | |
482 | if (event->attr.exclude_kernel || event->attr.exclude_user || | |
483 | event->attr.exclude_hv || event->attr.exclude_idle) { | |
484 | pr_debug("ARM performance counters do not support " | |
485 | "mode exclusion\n"); | |
486 | return -EPERM; | |
487 | } | |
488 | ||
489 | /* | |
490 | * We don't assign an index until we actually place the event onto | |
491 | * hardware. Use -1 to signify that we haven't decided where to put it | |
492 | * yet. For SMP systems, each core has it's own PMU so we can't do any | |
493 | * clever allocation or constraints checking at this point. | |
494 | */ | |
495 | hwc->idx = -1; | |
496 | ||
497 | /* | |
498 | * Store the event encoding into the config_base field. config and | |
499 | * event_base are unused as the only 2 things we need to know are | |
500 | * the event mapping and the counter to use. The counter to use is | |
501 | * also the indx and the config_base is the event type. | |
502 | */ | |
503 | hwc->config_base = (unsigned long)mapping; | |
504 | hwc->config = 0; | |
505 | hwc->event_base = 0; | |
506 | ||
507 | if (!hwc->sample_period) { | |
508 | hwc->sample_period = armpmu->max_period; | |
509 | hwc->last_period = hwc->sample_period; | |
e7850595 | 510 | local64_set(&hwc->period_left, hwc->sample_period); |
1b8873a0 JI |
511 | } |
512 | ||
513 | err = 0; | |
514 | if (event->group_leader != event) { | |
515 | err = validate_group(event); | |
516 | if (err) | |
517 | return -EINVAL; | |
518 | } | |
519 | ||
520 | return err; | |
521 | } | |
522 | ||
b0a873eb | 523 | static int armpmu_event_init(struct perf_event *event) |
1b8873a0 JI |
524 | { |
525 | int err = 0; | |
526 | ||
b0a873eb PZ |
527 | switch (event->attr.type) { |
528 | case PERF_TYPE_RAW: | |
529 | case PERF_TYPE_HARDWARE: | |
530 | case PERF_TYPE_HW_CACHE: | |
531 | break; | |
532 | ||
533 | default: | |
534 | return -ENOENT; | |
535 | } | |
536 | ||
1b8873a0 | 537 | if (!armpmu) |
b0a873eb | 538 | return -ENODEV; |
1b8873a0 JI |
539 | |
540 | event->destroy = hw_perf_event_destroy; | |
541 | ||
542 | if (!atomic_inc_not_zero(&active_events)) { | |
1efeb08d | 543 | if (atomic_read(&active_events) > armpmu->num_events) { |
1b8873a0 | 544 | atomic_dec(&active_events); |
b0a873eb | 545 | return -ENOSPC; |
1b8873a0 JI |
546 | } |
547 | ||
548 | mutex_lock(&pmu_reserve_mutex); | |
549 | if (atomic_read(&active_events) == 0) { | |
550 | err = armpmu_reserve_hardware(); | |
551 | } | |
552 | ||
553 | if (!err) | |
554 | atomic_inc(&active_events); | |
555 | mutex_unlock(&pmu_reserve_mutex); | |
556 | } | |
557 | ||
558 | if (err) | |
b0a873eb | 559 | return err; |
1b8873a0 JI |
560 | |
561 | err = __hw_perf_event_init(event); | |
562 | if (err) | |
563 | hw_perf_event_destroy(event); | |
564 | ||
b0a873eb | 565 | return err; |
1b8873a0 JI |
566 | } |
567 | ||
a4eaf7f1 | 568 | static void armpmu_enable(struct pmu *pmu) |
1b8873a0 JI |
569 | { |
570 | /* Enable all of the perf events on hardware. */ | |
571 | int idx; | |
572 | struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events); | |
573 | ||
574 | if (!armpmu) | |
575 | return; | |
576 | ||
577 | for (idx = 0; idx <= armpmu->num_events; ++idx) { | |
578 | struct perf_event *event = cpuc->events[idx]; | |
579 | ||
580 | if (!event) | |
581 | continue; | |
582 | ||
583 | armpmu->enable(&event->hw, idx); | |
584 | } | |
585 | ||
586 | armpmu->start(); | |
587 | } | |
588 | ||
a4eaf7f1 | 589 | static void armpmu_disable(struct pmu *pmu) |
1b8873a0 JI |
590 | { |
591 | if (armpmu) | |
592 | armpmu->stop(); | |
593 | } | |
594 | ||
33696fc0 | 595 | static struct pmu pmu = { |
a4eaf7f1 PZ |
596 | .pmu_enable = armpmu_enable, |
597 | .pmu_disable = armpmu_disable, | |
598 | .event_init = armpmu_event_init, | |
599 | .add = armpmu_add, | |
600 | .del = armpmu_del, | |
601 | .start = armpmu_start, | |
602 | .stop = armpmu_stop, | |
603 | .read = armpmu_read, | |
33696fc0 PZ |
604 | }; |
605 | ||
1b8873a0 JI |
606 | /* |
607 | * ARMv6 Performance counter handling code. | |
608 | * | |
609 | * ARMv6 has 2 configurable performance counters and a single cycle counter. | |
610 | * They all share a single reset bit but can be written to zero so we can use | |
611 | * that for a reset. | |
612 | * | |
613 | * The counters can't be individually enabled or disabled so when we remove | |
614 | * one event and replace it with another we could get spurious counts from the | |
615 | * wrong event. However, we can take advantage of the fact that the | |
616 | * performance counters can export events to the event bus, and the event bus | |
617 | * itself can be monitored. This requires that we *don't* export the events to | |
618 | * the event bus. The procedure for disabling a configurable counter is: | |
619 | * - change the counter to count the ETMEXTOUT[0] signal (0x20). This | |
620 | * effectively stops the counter from counting. | |
621 | * - disable the counter's interrupt generation (each counter has it's | |
622 | * own interrupt enable bit). | |
623 | * Once stopped, the counter value can be written as 0 to reset. | |
624 | * | |
625 | * To enable a counter: | |
626 | * - enable the counter's interrupt generation. | |
627 | * - set the new event type. | |
628 | * | |
629 | * Note: the dedicated cycle counter only counts cycles and can't be | |
630 | * enabled/disabled independently of the others. When we want to disable the | |
631 | * cycle counter, we have to just disable the interrupt reporting and start | |
632 | * ignoring that counter. When re-enabling, we have to reset the value and | |
633 | * enable the interrupt. | |
634 | */ | |
635 | ||
636 | enum armv6_perf_types { | |
637 | ARMV6_PERFCTR_ICACHE_MISS = 0x0, | |
638 | ARMV6_PERFCTR_IBUF_STALL = 0x1, | |
639 | ARMV6_PERFCTR_DDEP_STALL = 0x2, | |
640 | ARMV6_PERFCTR_ITLB_MISS = 0x3, | |
641 | ARMV6_PERFCTR_DTLB_MISS = 0x4, | |
642 | ARMV6_PERFCTR_BR_EXEC = 0x5, | |
643 | ARMV6_PERFCTR_BR_MISPREDICT = 0x6, | |
644 | ARMV6_PERFCTR_INSTR_EXEC = 0x7, | |
645 | ARMV6_PERFCTR_DCACHE_HIT = 0x9, | |
646 | ARMV6_PERFCTR_DCACHE_ACCESS = 0xA, | |
647 | ARMV6_PERFCTR_DCACHE_MISS = 0xB, | |
648 | ARMV6_PERFCTR_DCACHE_WBACK = 0xC, | |
649 | ARMV6_PERFCTR_SW_PC_CHANGE = 0xD, | |
650 | ARMV6_PERFCTR_MAIN_TLB_MISS = 0xF, | |
651 | ARMV6_PERFCTR_EXPL_D_ACCESS = 0x10, | |
652 | ARMV6_PERFCTR_LSU_FULL_STALL = 0x11, | |
653 | ARMV6_PERFCTR_WBUF_DRAINED = 0x12, | |
654 | ARMV6_PERFCTR_CPU_CYCLES = 0xFF, | |
655 | ARMV6_PERFCTR_NOP = 0x20, | |
656 | }; | |
657 | ||
658 | enum armv6_counters { | |
659 | ARMV6_CYCLE_COUNTER = 1, | |
660 | ARMV6_COUNTER0, | |
661 | ARMV6_COUNTER1, | |
662 | }; | |
663 | ||
664 | /* | |
665 | * The hardware events that we support. We do support cache operations but | |
666 | * we have harvard caches and no way to combine instruction and data | |
667 | * accesses/misses in hardware. | |
668 | */ | |
669 | static const unsigned armv6_perf_map[PERF_COUNT_HW_MAX] = { | |
670 | [PERF_COUNT_HW_CPU_CYCLES] = ARMV6_PERFCTR_CPU_CYCLES, | |
671 | [PERF_COUNT_HW_INSTRUCTIONS] = ARMV6_PERFCTR_INSTR_EXEC, | |
672 | [PERF_COUNT_HW_CACHE_REFERENCES] = HW_OP_UNSUPPORTED, | |
673 | [PERF_COUNT_HW_CACHE_MISSES] = HW_OP_UNSUPPORTED, | |
674 | [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV6_PERFCTR_BR_EXEC, | |
675 | [PERF_COUNT_HW_BRANCH_MISSES] = ARMV6_PERFCTR_BR_MISPREDICT, | |
676 | [PERF_COUNT_HW_BUS_CYCLES] = HW_OP_UNSUPPORTED, | |
677 | }; | |
678 | ||
679 | static const unsigned armv6_perf_cache_map[PERF_COUNT_HW_CACHE_MAX] | |
680 | [PERF_COUNT_HW_CACHE_OP_MAX] | |
681 | [PERF_COUNT_HW_CACHE_RESULT_MAX] = { | |
682 | [C(L1D)] = { | |
683 | /* | |
684 | * The performance counters don't differentiate between read | |
685 | * and write accesses/misses so this isn't strictly correct, | |
686 | * but it's the best we can do. Writes and reads get | |
687 | * combined. | |
688 | */ | |
689 | [C(OP_READ)] = { | |
690 | [C(RESULT_ACCESS)] = ARMV6_PERFCTR_DCACHE_ACCESS, | |
691 | [C(RESULT_MISS)] = ARMV6_PERFCTR_DCACHE_MISS, | |
692 | }, | |
693 | [C(OP_WRITE)] = { | |
694 | [C(RESULT_ACCESS)] = ARMV6_PERFCTR_DCACHE_ACCESS, | |
695 | [C(RESULT_MISS)] = ARMV6_PERFCTR_DCACHE_MISS, | |
696 | }, | |
697 | [C(OP_PREFETCH)] = { | |
698 | [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, | |
699 | [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, | |
700 | }, | |
701 | }, | |
702 | [C(L1I)] = { | |
703 | [C(OP_READ)] = { | |
704 | [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, | |
705 | [C(RESULT_MISS)] = ARMV6_PERFCTR_ICACHE_MISS, | |
706 | }, | |
707 | [C(OP_WRITE)] = { | |
708 | [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, | |
709 | [C(RESULT_MISS)] = ARMV6_PERFCTR_ICACHE_MISS, | |
710 | }, | |
711 | [C(OP_PREFETCH)] = { | |
712 | [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, | |
713 | [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, | |
714 | }, | |
715 | }, | |
716 | [C(LL)] = { | |
717 | [C(OP_READ)] = { | |
718 | [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, | |
719 | [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, | |
720 | }, | |
721 | [C(OP_WRITE)] = { | |
722 | [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, | |
723 | [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, | |
724 | }, | |
725 | [C(OP_PREFETCH)] = { | |
726 | [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, | |
727 | [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, | |
728 | }, | |
729 | }, | |
730 | [C(DTLB)] = { | |
731 | /* | |
732 | * The ARM performance counters can count micro DTLB misses, | |
733 | * micro ITLB misses and main TLB misses. There isn't an event | |
734 | * for TLB misses, so use the micro misses here and if users | |
735 | * want the main TLB misses they can use a raw counter. | |
736 | */ | |
737 | [C(OP_READ)] = { | |
738 | [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, | |
739 | [C(RESULT_MISS)] = ARMV6_PERFCTR_DTLB_MISS, | |
740 | }, | |
741 | [C(OP_WRITE)] = { | |
742 | [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, | |
743 | [C(RESULT_MISS)] = ARMV6_PERFCTR_DTLB_MISS, | |
744 | }, | |
745 | [C(OP_PREFETCH)] = { | |
746 | [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, | |
747 | [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, | |
748 | }, | |
749 | }, | |
750 | [C(ITLB)] = { | |
751 | [C(OP_READ)] = { | |
752 | [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, | |
753 | [C(RESULT_MISS)] = ARMV6_PERFCTR_ITLB_MISS, | |
754 | }, | |
755 | [C(OP_WRITE)] = { | |
756 | [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, | |
757 | [C(RESULT_MISS)] = ARMV6_PERFCTR_ITLB_MISS, | |
758 | }, | |
759 | [C(OP_PREFETCH)] = { | |
760 | [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, | |
761 | [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, | |
762 | }, | |
763 | }, | |
764 | [C(BPU)] = { | |
765 | [C(OP_READ)] = { | |
766 | [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, | |
767 | [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, | |
768 | }, | |
769 | [C(OP_WRITE)] = { | |
770 | [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, | |
771 | [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, | |
772 | }, | |
773 | [C(OP_PREFETCH)] = { | |
774 | [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, | |
775 | [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, | |
776 | }, | |
777 | }, | |
778 | }; | |
779 | ||
780 | enum armv6mpcore_perf_types { | |
781 | ARMV6MPCORE_PERFCTR_ICACHE_MISS = 0x0, | |
782 | ARMV6MPCORE_PERFCTR_IBUF_STALL = 0x1, | |
783 | ARMV6MPCORE_PERFCTR_DDEP_STALL = 0x2, | |
784 | ARMV6MPCORE_PERFCTR_ITLB_MISS = 0x3, | |
785 | ARMV6MPCORE_PERFCTR_DTLB_MISS = 0x4, | |
786 | ARMV6MPCORE_PERFCTR_BR_EXEC = 0x5, | |
787 | ARMV6MPCORE_PERFCTR_BR_NOTPREDICT = 0x6, | |
788 | ARMV6MPCORE_PERFCTR_BR_MISPREDICT = 0x7, | |
789 | ARMV6MPCORE_PERFCTR_INSTR_EXEC = 0x8, | |
790 | ARMV6MPCORE_PERFCTR_DCACHE_RDACCESS = 0xA, | |
791 | ARMV6MPCORE_PERFCTR_DCACHE_RDMISS = 0xB, | |
792 | ARMV6MPCORE_PERFCTR_DCACHE_WRACCESS = 0xC, | |
793 | ARMV6MPCORE_PERFCTR_DCACHE_WRMISS = 0xD, | |
794 | ARMV6MPCORE_PERFCTR_DCACHE_EVICTION = 0xE, | |
795 | ARMV6MPCORE_PERFCTR_SW_PC_CHANGE = 0xF, | |
796 | ARMV6MPCORE_PERFCTR_MAIN_TLB_MISS = 0x10, | |
797 | ARMV6MPCORE_PERFCTR_EXPL_MEM_ACCESS = 0x11, | |
798 | ARMV6MPCORE_PERFCTR_LSU_FULL_STALL = 0x12, | |
799 | ARMV6MPCORE_PERFCTR_WBUF_DRAINED = 0x13, | |
800 | ARMV6MPCORE_PERFCTR_CPU_CYCLES = 0xFF, | |
801 | }; | |
802 | ||
803 | /* | |
804 | * The hardware events that we support. We do support cache operations but | |
805 | * we have harvard caches and no way to combine instruction and data | |
806 | * accesses/misses in hardware. | |
807 | */ | |
808 | static const unsigned armv6mpcore_perf_map[PERF_COUNT_HW_MAX] = { | |
809 | [PERF_COUNT_HW_CPU_CYCLES] = ARMV6MPCORE_PERFCTR_CPU_CYCLES, | |
810 | [PERF_COUNT_HW_INSTRUCTIONS] = ARMV6MPCORE_PERFCTR_INSTR_EXEC, | |
811 | [PERF_COUNT_HW_CACHE_REFERENCES] = HW_OP_UNSUPPORTED, | |
812 | [PERF_COUNT_HW_CACHE_MISSES] = HW_OP_UNSUPPORTED, | |
813 | [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV6MPCORE_PERFCTR_BR_EXEC, | |
814 | [PERF_COUNT_HW_BRANCH_MISSES] = ARMV6MPCORE_PERFCTR_BR_MISPREDICT, | |
815 | [PERF_COUNT_HW_BUS_CYCLES] = HW_OP_UNSUPPORTED, | |
816 | }; | |
817 | ||
818 | static const unsigned armv6mpcore_perf_cache_map[PERF_COUNT_HW_CACHE_MAX] | |
819 | [PERF_COUNT_HW_CACHE_OP_MAX] | |
820 | [PERF_COUNT_HW_CACHE_RESULT_MAX] = { | |
821 | [C(L1D)] = { | |
822 | [C(OP_READ)] = { | |
823 | [C(RESULT_ACCESS)] = | |
824 | ARMV6MPCORE_PERFCTR_DCACHE_RDACCESS, | |
825 | [C(RESULT_MISS)] = | |
826 | ARMV6MPCORE_PERFCTR_DCACHE_RDMISS, | |
827 | }, | |
828 | [C(OP_WRITE)] = { | |
829 | [C(RESULT_ACCESS)] = | |
830 | ARMV6MPCORE_PERFCTR_DCACHE_WRACCESS, | |
831 | [C(RESULT_MISS)] = | |
832 | ARMV6MPCORE_PERFCTR_DCACHE_WRMISS, | |
833 | }, | |
834 | [C(OP_PREFETCH)] = { | |
835 | [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, | |
836 | [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, | |
837 | }, | |
838 | }, | |
839 | [C(L1I)] = { | |
840 | [C(OP_READ)] = { | |
841 | [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, | |
842 | [C(RESULT_MISS)] = ARMV6MPCORE_PERFCTR_ICACHE_MISS, | |
843 | }, | |
844 | [C(OP_WRITE)] = { | |
845 | [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, | |
846 | [C(RESULT_MISS)] = ARMV6MPCORE_PERFCTR_ICACHE_MISS, | |
847 | }, | |
848 | [C(OP_PREFETCH)] = { | |
849 | [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, | |
850 | [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, | |
851 | }, | |
852 | }, | |
853 | [C(LL)] = { | |
854 | [C(OP_READ)] = { | |
855 | [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, | |
856 | [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, | |
857 | }, | |
858 | [C(OP_WRITE)] = { | |
859 | [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, | |
860 | [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, | |
861 | }, | |
862 | [C(OP_PREFETCH)] = { | |
863 | [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, | |
864 | [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, | |
865 | }, | |
866 | }, | |
867 | [C(DTLB)] = { | |
868 | /* | |
869 | * The ARM performance counters can count micro DTLB misses, | |
870 | * micro ITLB misses and main TLB misses. There isn't an event | |
871 | * for TLB misses, so use the micro misses here and if users | |
872 | * want the main TLB misses they can use a raw counter. | |
873 | */ | |
874 | [C(OP_READ)] = { | |
875 | [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, | |
876 | [C(RESULT_MISS)] = ARMV6MPCORE_PERFCTR_DTLB_MISS, | |
877 | }, | |
878 | [C(OP_WRITE)] = { | |
879 | [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, | |
880 | [C(RESULT_MISS)] = ARMV6MPCORE_PERFCTR_DTLB_MISS, | |
881 | }, | |
882 | [C(OP_PREFETCH)] = { | |
883 | [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, | |
884 | [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, | |
885 | }, | |
886 | }, | |
887 | [C(ITLB)] = { | |
888 | [C(OP_READ)] = { | |
889 | [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, | |
890 | [C(RESULT_MISS)] = ARMV6MPCORE_PERFCTR_ITLB_MISS, | |
891 | }, | |
892 | [C(OP_WRITE)] = { | |
893 | [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, | |
894 | [C(RESULT_MISS)] = ARMV6MPCORE_PERFCTR_ITLB_MISS, | |
895 | }, | |
896 | [C(OP_PREFETCH)] = { | |
897 | [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, | |
898 | [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, | |
899 | }, | |
900 | }, | |
901 | [C(BPU)] = { | |
902 | [C(OP_READ)] = { | |
903 | [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, | |
904 | [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, | |
905 | }, | |
906 | [C(OP_WRITE)] = { | |
907 | [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, | |
908 | [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, | |
909 | }, | |
910 | [C(OP_PREFETCH)] = { | |
911 | [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, | |
912 | [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, | |
913 | }, | |
914 | }, | |
915 | }; | |
916 | ||
917 | static inline unsigned long | |
918 | armv6_pmcr_read(void) | |
919 | { | |
920 | u32 val; | |
921 | asm volatile("mrc p15, 0, %0, c15, c12, 0" : "=r"(val)); | |
922 | return val; | |
923 | } | |
924 | ||
925 | static inline void | |
926 | armv6_pmcr_write(unsigned long val) | |
927 | { | |
928 | asm volatile("mcr p15, 0, %0, c15, c12, 0" : : "r"(val)); | |
929 | } | |
930 | ||
931 | #define ARMV6_PMCR_ENABLE (1 << 0) | |
932 | #define ARMV6_PMCR_CTR01_RESET (1 << 1) | |
933 | #define ARMV6_PMCR_CCOUNT_RESET (1 << 2) | |
934 | #define ARMV6_PMCR_CCOUNT_DIV (1 << 3) | |
935 | #define ARMV6_PMCR_COUNT0_IEN (1 << 4) | |
936 | #define ARMV6_PMCR_COUNT1_IEN (1 << 5) | |
937 | #define ARMV6_PMCR_CCOUNT_IEN (1 << 6) | |
938 | #define ARMV6_PMCR_COUNT0_OVERFLOW (1 << 8) | |
939 | #define ARMV6_PMCR_COUNT1_OVERFLOW (1 << 9) | |
940 | #define ARMV6_PMCR_CCOUNT_OVERFLOW (1 << 10) | |
941 | #define ARMV6_PMCR_EVT_COUNT0_SHIFT 20 | |
942 | #define ARMV6_PMCR_EVT_COUNT0_MASK (0xFF << ARMV6_PMCR_EVT_COUNT0_SHIFT) | |
943 | #define ARMV6_PMCR_EVT_COUNT1_SHIFT 12 | |
944 | #define ARMV6_PMCR_EVT_COUNT1_MASK (0xFF << ARMV6_PMCR_EVT_COUNT1_SHIFT) | |
945 | ||
946 | #define ARMV6_PMCR_OVERFLOWED_MASK \ | |
947 | (ARMV6_PMCR_COUNT0_OVERFLOW | ARMV6_PMCR_COUNT1_OVERFLOW | \ | |
948 | ARMV6_PMCR_CCOUNT_OVERFLOW) | |
949 | ||
950 | static inline int | |
951 | armv6_pmcr_has_overflowed(unsigned long pmcr) | |
952 | { | |
953 | return (pmcr & ARMV6_PMCR_OVERFLOWED_MASK); | |
954 | } | |
955 | ||
956 | static inline int | |
957 | armv6_pmcr_counter_has_overflowed(unsigned long pmcr, | |
958 | enum armv6_counters counter) | |
959 | { | |
960 | int ret = 0; | |
961 | ||
962 | if (ARMV6_CYCLE_COUNTER == counter) | |
963 | ret = pmcr & ARMV6_PMCR_CCOUNT_OVERFLOW; | |
964 | else if (ARMV6_COUNTER0 == counter) | |
965 | ret = pmcr & ARMV6_PMCR_COUNT0_OVERFLOW; | |
966 | else if (ARMV6_COUNTER1 == counter) | |
967 | ret = pmcr & ARMV6_PMCR_COUNT1_OVERFLOW; | |
968 | else | |
969 | WARN_ONCE(1, "invalid counter number (%d)\n", counter); | |
970 | ||
971 | return ret; | |
972 | } | |
973 | ||
974 | static inline u32 | |
975 | armv6pmu_read_counter(int counter) | |
976 | { | |
977 | unsigned long value = 0; | |
978 | ||
979 | if (ARMV6_CYCLE_COUNTER == counter) | |
980 | asm volatile("mrc p15, 0, %0, c15, c12, 1" : "=r"(value)); | |
981 | else if (ARMV6_COUNTER0 == counter) | |
982 | asm volatile("mrc p15, 0, %0, c15, c12, 2" : "=r"(value)); | |
983 | else if (ARMV6_COUNTER1 == counter) | |
984 | asm volatile("mrc p15, 0, %0, c15, c12, 3" : "=r"(value)); | |
985 | else | |
986 | WARN_ONCE(1, "invalid counter number (%d)\n", counter); | |
987 | ||
988 | return value; | |
989 | } | |
990 | ||
991 | static inline void | |
992 | armv6pmu_write_counter(int counter, | |
993 | u32 value) | |
994 | { | |
995 | if (ARMV6_CYCLE_COUNTER == counter) | |
996 | asm volatile("mcr p15, 0, %0, c15, c12, 1" : : "r"(value)); | |
997 | else if (ARMV6_COUNTER0 == counter) | |
998 | asm volatile("mcr p15, 0, %0, c15, c12, 2" : : "r"(value)); | |
999 | else if (ARMV6_COUNTER1 == counter) | |
1000 | asm volatile("mcr p15, 0, %0, c15, c12, 3" : : "r"(value)); | |
1001 | else | |
1002 | WARN_ONCE(1, "invalid counter number (%d)\n", counter); | |
1003 | } | |
1004 | ||
1005 | void | |
1006 | armv6pmu_enable_event(struct hw_perf_event *hwc, | |
1007 | int idx) | |
1008 | { | |
1009 | unsigned long val, mask, evt, flags; | |
1010 | ||
1011 | if (ARMV6_CYCLE_COUNTER == idx) { | |
1012 | mask = 0; | |
1013 | evt = ARMV6_PMCR_CCOUNT_IEN; | |
1014 | } else if (ARMV6_COUNTER0 == idx) { | |
1015 | mask = ARMV6_PMCR_EVT_COUNT0_MASK; | |
1016 | evt = (hwc->config_base << ARMV6_PMCR_EVT_COUNT0_SHIFT) | | |
1017 | ARMV6_PMCR_COUNT0_IEN; | |
1018 | } else if (ARMV6_COUNTER1 == idx) { | |
1019 | mask = ARMV6_PMCR_EVT_COUNT1_MASK; | |
1020 | evt = (hwc->config_base << ARMV6_PMCR_EVT_COUNT1_SHIFT) | | |
1021 | ARMV6_PMCR_COUNT1_IEN; | |
1022 | } else { | |
1023 | WARN_ONCE(1, "invalid counter number (%d)\n", idx); | |
1024 | return; | |
1025 | } | |
1026 | ||
1027 | /* | |
1028 | * Mask out the current event and set the counter to count the event | |
1029 | * that we're interested in. | |
1030 | */ | |
1031 | spin_lock_irqsave(&pmu_lock, flags); | |
1032 | val = armv6_pmcr_read(); | |
1033 | val &= ~mask; | |
1034 | val |= evt; | |
1035 | armv6_pmcr_write(val); | |
1036 | spin_unlock_irqrestore(&pmu_lock, flags); | |
1037 | } | |
1038 | ||
1039 | static irqreturn_t | |
1040 | armv6pmu_handle_irq(int irq_num, | |
1041 | void *dev) | |
1042 | { | |
1043 | unsigned long pmcr = armv6_pmcr_read(); | |
1044 | struct perf_sample_data data; | |
1045 | struct cpu_hw_events *cpuc; | |
1046 | struct pt_regs *regs; | |
1047 | int idx; | |
1048 | ||
1049 | if (!armv6_pmcr_has_overflowed(pmcr)) | |
1050 | return IRQ_NONE; | |
1051 | ||
1052 | regs = get_irq_regs(); | |
1053 | ||
1054 | /* | |
1055 | * The interrupts are cleared by writing the overflow flags back to | |
1056 | * the control register. All of the other bits don't have any effect | |
1057 | * if they are rewritten, so write the whole value back. | |
1058 | */ | |
1059 | armv6_pmcr_write(pmcr); | |
1060 | ||
dc1d628a | 1061 | perf_sample_data_init(&data, 0); |
1b8873a0 JI |
1062 | |
1063 | cpuc = &__get_cpu_var(cpu_hw_events); | |
1064 | for (idx = 0; idx <= armpmu->num_events; ++idx) { | |
1065 | struct perf_event *event = cpuc->events[idx]; | |
1066 | struct hw_perf_event *hwc; | |
1067 | ||
1068 | if (!test_bit(idx, cpuc->active_mask)) | |
1069 | continue; | |
1070 | ||
1071 | /* | |
1072 | * We have a single interrupt for all counters. Check that | |
1073 | * each counter has overflowed before we process it. | |
1074 | */ | |
1075 | if (!armv6_pmcr_counter_has_overflowed(pmcr, idx)) | |
1076 | continue; | |
1077 | ||
1078 | hwc = &event->hw; | |
1079 | armpmu_event_update(event, hwc, idx); | |
1080 | data.period = event->hw.last_period; | |
1081 | if (!armpmu_event_set_period(event, hwc, idx)) | |
1082 | continue; | |
1083 | ||
1084 | if (perf_event_overflow(event, 0, &data, regs)) | |
1085 | armpmu->disable(hwc, idx); | |
1086 | } | |
1087 | ||
1088 | /* | |
1089 | * Handle the pending perf events. | |
1090 | * | |
25d35847 WD |
1091 | * Note: this call *must* be run with interrupts disabled. For |
1092 | * platforms that can have the PMU interrupts raised as an NMI, this | |
1b8873a0 JI |
1093 | * will not work. |
1094 | */ | |
e360adbe | 1095 | irq_work_run(); |
1b8873a0 JI |
1096 | |
1097 | return IRQ_HANDLED; | |
1098 | } | |
1099 | ||
1100 | static void | |
1101 | armv6pmu_start(void) | |
1102 | { | |
1103 | unsigned long flags, val; | |
1104 | ||
1105 | spin_lock_irqsave(&pmu_lock, flags); | |
1106 | val = armv6_pmcr_read(); | |
1107 | val |= ARMV6_PMCR_ENABLE; | |
1108 | armv6_pmcr_write(val); | |
1109 | spin_unlock_irqrestore(&pmu_lock, flags); | |
1110 | } | |
1111 | ||
1112 | void | |
1113 | armv6pmu_stop(void) | |
1114 | { | |
1115 | unsigned long flags, val; | |
1116 | ||
1117 | spin_lock_irqsave(&pmu_lock, flags); | |
1118 | val = armv6_pmcr_read(); | |
1119 | val &= ~ARMV6_PMCR_ENABLE; | |
1120 | armv6_pmcr_write(val); | |
1121 | spin_unlock_irqrestore(&pmu_lock, flags); | |
1122 | } | |
1123 | ||
1124 | static inline int | |
1125 | armv6pmu_event_map(int config) | |
1126 | { | |
1127 | int mapping = armv6_perf_map[config]; | |
1128 | if (HW_OP_UNSUPPORTED == mapping) | |
1129 | mapping = -EOPNOTSUPP; | |
1130 | return mapping; | |
1131 | } | |
1132 | ||
1133 | static inline int | |
1134 | armv6mpcore_pmu_event_map(int config) | |
1135 | { | |
1136 | int mapping = armv6mpcore_perf_map[config]; | |
1137 | if (HW_OP_UNSUPPORTED == mapping) | |
1138 | mapping = -EOPNOTSUPP; | |
1139 | return mapping; | |
1140 | } | |
1141 | ||
1142 | static u64 | |
1143 | armv6pmu_raw_event(u64 config) | |
1144 | { | |
1145 | return config & 0xff; | |
1146 | } | |
1147 | ||
1148 | static int | |
1149 | armv6pmu_get_event_idx(struct cpu_hw_events *cpuc, | |
1150 | struct hw_perf_event *event) | |
1151 | { | |
1152 | /* Always place a cycle counter into the cycle counter. */ | |
1153 | if (ARMV6_PERFCTR_CPU_CYCLES == event->config_base) { | |
1154 | if (test_and_set_bit(ARMV6_CYCLE_COUNTER, cpuc->used_mask)) | |
1155 | return -EAGAIN; | |
1156 | ||
1157 | return ARMV6_CYCLE_COUNTER; | |
1158 | } else { | |
1159 | /* | |
1160 | * For anything other than a cycle counter, try and use | |
1161 | * counter0 and counter1. | |
1162 | */ | |
1163 | if (!test_and_set_bit(ARMV6_COUNTER1, cpuc->used_mask)) { | |
1164 | return ARMV6_COUNTER1; | |
1165 | } | |
1166 | ||
1167 | if (!test_and_set_bit(ARMV6_COUNTER0, cpuc->used_mask)) { | |
1168 | return ARMV6_COUNTER0; | |
1169 | } | |
1170 | ||
1171 | /* The counters are all in use. */ | |
1172 | return -EAGAIN; | |
1173 | } | |
1174 | } | |
1175 | ||
1176 | static void | |
1177 | armv6pmu_disable_event(struct hw_perf_event *hwc, | |
1178 | int idx) | |
1179 | { | |
1180 | unsigned long val, mask, evt, flags; | |
1181 | ||
1182 | if (ARMV6_CYCLE_COUNTER == idx) { | |
1183 | mask = ARMV6_PMCR_CCOUNT_IEN; | |
1184 | evt = 0; | |
1185 | } else if (ARMV6_COUNTER0 == idx) { | |
1186 | mask = ARMV6_PMCR_COUNT0_IEN | ARMV6_PMCR_EVT_COUNT0_MASK; | |
1187 | evt = ARMV6_PERFCTR_NOP << ARMV6_PMCR_EVT_COUNT0_SHIFT; | |
1188 | } else if (ARMV6_COUNTER1 == idx) { | |
1189 | mask = ARMV6_PMCR_COUNT1_IEN | ARMV6_PMCR_EVT_COUNT1_MASK; | |
1190 | evt = ARMV6_PERFCTR_NOP << ARMV6_PMCR_EVT_COUNT1_SHIFT; | |
1191 | } else { | |
1192 | WARN_ONCE(1, "invalid counter number (%d)\n", idx); | |
1193 | return; | |
1194 | } | |
1195 | ||
1196 | /* | |
1197 | * Mask out the current event and set the counter to count the number | |
1198 | * of ETM bus signal assertion cycles. The external reporting should | |
1199 | * be disabled and so this should never increment. | |
1200 | */ | |
1201 | spin_lock_irqsave(&pmu_lock, flags); | |
1202 | val = armv6_pmcr_read(); | |
1203 | val &= ~mask; | |
1204 | val |= evt; | |
1205 | armv6_pmcr_write(val); | |
1206 | spin_unlock_irqrestore(&pmu_lock, flags); | |
1207 | } | |
1208 | ||
1209 | static void | |
1210 | armv6mpcore_pmu_disable_event(struct hw_perf_event *hwc, | |
1211 | int idx) | |
1212 | { | |
1213 | unsigned long val, mask, flags, evt = 0; | |
1214 | ||
1215 | if (ARMV6_CYCLE_COUNTER == idx) { | |
1216 | mask = ARMV6_PMCR_CCOUNT_IEN; | |
1217 | } else if (ARMV6_COUNTER0 == idx) { | |
1218 | mask = ARMV6_PMCR_COUNT0_IEN; | |
1219 | } else if (ARMV6_COUNTER1 == idx) { | |
1220 | mask = ARMV6_PMCR_COUNT1_IEN; | |
1221 | } else { | |
1222 | WARN_ONCE(1, "invalid counter number (%d)\n", idx); | |
1223 | return; | |
1224 | } | |
1225 | ||
1226 | /* | |
1227 | * Unlike UP ARMv6, we don't have a way of stopping the counters. We | |
1228 | * simply disable the interrupt reporting. | |
1229 | */ | |
1230 | spin_lock_irqsave(&pmu_lock, flags); | |
1231 | val = armv6_pmcr_read(); | |
1232 | val &= ~mask; | |
1233 | val |= evt; | |
1234 | armv6_pmcr_write(val); | |
1235 | spin_unlock_irqrestore(&pmu_lock, flags); | |
1236 | } | |
1237 | ||
1238 | static const struct arm_pmu armv6pmu = { | |
181193f3 | 1239 | .id = ARM_PERF_PMU_ID_V6, |
1b8873a0 JI |
1240 | .handle_irq = armv6pmu_handle_irq, |
1241 | .enable = armv6pmu_enable_event, | |
1242 | .disable = armv6pmu_disable_event, | |
1243 | .event_map = armv6pmu_event_map, | |
1244 | .raw_event = armv6pmu_raw_event, | |
1245 | .read_counter = armv6pmu_read_counter, | |
1246 | .write_counter = armv6pmu_write_counter, | |
1247 | .get_event_idx = armv6pmu_get_event_idx, | |
1248 | .start = armv6pmu_start, | |
1249 | .stop = armv6pmu_stop, | |
1250 | .num_events = 3, | |
1251 | .max_period = (1LLU << 32) - 1, | |
1252 | }; | |
1253 | ||
1254 | /* | |
1255 | * ARMv6mpcore is almost identical to single core ARMv6 with the exception | |
1256 | * that some of the events have different enumerations and that there is no | |
1257 | * *hack* to stop the programmable counters. To stop the counters we simply | |
1258 | * disable the interrupt reporting and update the event. When unthrottling we | |
1259 | * reset the period and enable the interrupt reporting. | |
1260 | */ | |
1261 | static const struct arm_pmu armv6mpcore_pmu = { | |
181193f3 | 1262 | .id = ARM_PERF_PMU_ID_V6MP, |
1b8873a0 JI |
1263 | .handle_irq = armv6pmu_handle_irq, |
1264 | .enable = armv6pmu_enable_event, | |
1265 | .disable = armv6mpcore_pmu_disable_event, | |
1266 | .event_map = armv6mpcore_pmu_event_map, | |
1267 | .raw_event = armv6pmu_raw_event, | |
1268 | .read_counter = armv6pmu_read_counter, | |
1269 | .write_counter = armv6pmu_write_counter, | |
1270 | .get_event_idx = armv6pmu_get_event_idx, | |
1271 | .start = armv6pmu_start, | |
1272 | .stop = armv6pmu_stop, | |
1273 | .num_events = 3, | |
1274 | .max_period = (1LLU << 32) - 1, | |
1275 | }; | |
1276 | ||
796d1295 JP |
1277 | /* |
1278 | * ARMv7 Cortex-A8 and Cortex-A9 Performance Events handling code. | |
1279 | * | |
1280 | * Copied from ARMv6 code, with the low level code inspired | |
1281 | * by the ARMv7 Oprofile code. | |
1282 | * | |
1283 | * Cortex-A8 has up to 4 configurable performance counters and | |
1284 | * a single cycle counter. | |
1285 | * Cortex-A9 has up to 31 configurable performance counters and | |
1286 | * a single cycle counter. | |
1287 | * | |
1288 | * All counters can be enabled/disabled and IRQ masked separately. The cycle | |
1289 | * counter and all 4 performance counters together can be reset separately. | |
1290 | */ | |
1291 | ||
796d1295 JP |
1292 | /* Common ARMv7 event types */ |
1293 | enum armv7_perf_types { | |
1294 | ARMV7_PERFCTR_PMNC_SW_INCR = 0x00, | |
1295 | ARMV7_PERFCTR_IFETCH_MISS = 0x01, | |
1296 | ARMV7_PERFCTR_ITLB_MISS = 0x02, | |
1297 | ARMV7_PERFCTR_DCACHE_REFILL = 0x03, | |
1298 | ARMV7_PERFCTR_DCACHE_ACCESS = 0x04, | |
1299 | ARMV7_PERFCTR_DTLB_REFILL = 0x05, | |
1300 | ARMV7_PERFCTR_DREAD = 0x06, | |
1301 | ARMV7_PERFCTR_DWRITE = 0x07, | |
1302 | ||
1303 | ARMV7_PERFCTR_EXC_TAKEN = 0x09, | |
1304 | ARMV7_PERFCTR_EXC_EXECUTED = 0x0A, | |
1305 | ARMV7_PERFCTR_CID_WRITE = 0x0B, | |
1306 | /* ARMV7_PERFCTR_PC_WRITE is equivalent to HW_BRANCH_INSTRUCTIONS. | |
1307 | * It counts: | |
1308 | * - all branch instructions, | |
1309 | * - instructions that explicitly write the PC, | |
1310 | * - exception generating instructions. | |
1311 | */ | |
1312 | ARMV7_PERFCTR_PC_WRITE = 0x0C, | |
1313 | ARMV7_PERFCTR_PC_IMM_BRANCH = 0x0D, | |
1314 | ARMV7_PERFCTR_UNALIGNED_ACCESS = 0x0F, | |
1315 | ARMV7_PERFCTR_PC_BRANCH_MIS_PRED = 0x10, | |
1316 | ARMV7_PERFCTR_CLOCK_CYCLES = 0x11, | |
1317 | ||
1318 | ARMV7_PERFCTR_PC_BRANCH_MIS_USED = 0x12, | |
1319 | ||
1320 | ARMV7_PERFCTR_CPU_CYCLES = 0xFF | |
1321 | }; | |
1322 | ||
1323 | /* ARMv7 Cortex-A8 specific event types */ | |
1324 | enum armv7_a8_perf_types { | |
1325 | ARMV7_PERFCTR_INSTR_EXECUTED = 0x08, | |
1326 | ||
1327 | ARMV7_PERFCTR_PC_PROC_RETURN = 0x0E, | |
1328 | ||
1329 | ARMV7_PERFCTR_WRITE_BUFFER_FULL = 0x40, | |
1330 | ARMV7_PERFCTR_L2_STORE_MERGED = 0x41, | |
1331 | ARMV7_PERFCTR_L2_STORE_BUFF = 0x42, | |
1332 | ARMV7_PERFCTR_L2_ACCESS = 0x43, | |
1333 | ARMV7_PERFCTR_L2_CACH_MISS = 0x44, | |
1334 | ARMV7_PERFCTR_AXI_READ_CYCLES = 0x45, | |
1335 | ARMV7_PERFCTR_AXI_WRITE_CYCLES = 0x46, | |
1336 | ARMV7_PERFCTR_MEMORY_REPLAY = 0x47, | |
1337 | ARMV7_PERFCTR_UNALIGNED_ACCESS_REPLAY = 0x48, | |
1338 | ARMV7_PERFCTR_L1_DATA_MISS = 0x49, | |
1339 | ARMV7_PERFCTR_L1_INST_MISS = 0x4A, | |
1340 | ARMV7_PERFCTR_L1_DATA_COLORING = 0x4B, | |
1341 | ARMV7_PERFCTR_L1_NEON_DATA = 0x4C, | |
1342 | ARMV7_PERFCTR_L1_NEON_CACH_DATA = 0x4D, | |
1343 | ARMV7_PERFCTR_L2_NEON = 0x4E, | |
1344 | ARMV7_PERFCTR_L2_NEON_HIT = 0x4F, | |
1345 | ARMV7_PERFCTR_L1_INST = 0x50, | |
1346 | ARMV7_PERFCTR_PC_RETURN_MIS_PRED = 0x51, | |
1347 | ARMV7_PERFCTR_PC_BRANCH_FAILED = 0x52, | |
1348 | ARMV7_PERFCTR_PC_BRANCH_TAKEN = 0x53, | |
1349 | ARMV7_PERFCTR_PC_BRANCH_EXECUTED = 0x54, | |
1350 | ARMV7_PERFCTR_OP_EXECUTED = 0x55, | |
1351 | ARMV7_PERFCTR_CYCLES_INST_STALL = 0x56, | |
1352 | ARMV7_PERFCTR_CYCLES_INST = 0x57, | |
1353 | ARMV7_PERFCTR_CYCLES_NEON_DATA_STALL = 0x58, | |
1354 | ARMV7_PERFCTR_CYCLES_NEON_INST_STALL = 0x59, | |
1355 | ARMV7_PERFCTR_NEON_CYCLES = 0x5A, | |
1356 | ||
1357 | ARMV7_PERFCTR_PMU0_EVENTS = 0x70, | |
1358 | ARMV7_PERFCTR_PMU1_EVENTS = 0x71, | |
1359 | ARMV7_PERFCTR_PMU_EVENTS = 0x72, | |
1360 | }; | |
1361 | ||
1362 | /* ARMv7 Cortex-A9 specific event types */ | |
1363 | enum armv7_a9_perf_types { | |
1364 | ARMV7_PERFCTR_JAVA_HW_BYTECODE_EXEC = 0x40, | |
1365 | ARMV7_PERFCTR_JAVA_SW_BYTECODE_EXEC = 0x41, | |
1366 | ARMV7_PERFCTR_JAZELLE_BRANCH_EXEC = 0x42, | |
1367 | ||
1368 | ARMV7_PERFCTR_COHERENT_LINE_MISS = 0x50, | |
1369 | ARMV7_PERFCTR_COHERENT_LINE_HIT = 0x51, | |
1370 | ||
1371 | ARMV7_PERFCTR_ICACHE_DEP_STALL_CYCLES = 0x60, | |
1372 | ARMV7_PERFCTR_DCACHE_DEP_STALL_CYCLES = 0x61, | |
1373 | ARMV7_PERFCTR_TLB_MISS_DEP_STALL_CYCLES = 0x62, | |
1374 | ARMV7_PERFCTR_STREX_EXECUTED_PASSED = 0x63, | |
1375 | ARMV7_PERFCTR_STREX_EXECUTED_FAILED = 0x64, | |
1376 | ARMV7_PERFCTR_DATA_EVICTION = 0x65, | |
1377 | ARMV7_PERFCTR_ISSUE_STAGE_NO_INST = 0x66, | |
1378 | ARMV7_PERFCTR_ISSUE_STAGE_EMPTY = 0x67, | |
1379 | ARMV7_PERFCTR_INST_OUT_OF_RENAME_STAGE = 0x68, | |
1380 | ||
1381 | ARMV7_PERFCTR_PREDICTABLE_FUNCT_RETURNS = 0x6E, | |
1382 | ||
1383 | ARMV7_PERFCTR_MAIN_UNIT_EXECUTED_INST = 0x70, | |
1384 | ARMV7_PERFCTR_SECOND_UNIT_EXECUTED_INST = 0x71, | |
1385 | ARMV7_PERFCTR_LD_ST_UNIT_EXECUTED_INST = 0x72, | |
1386 | ARMV7_PERFCTR_FP_EXECUTED_INST = 0x73, | |
1387 | ARMV7_PERFCTR_NEON_EXECUTED_INST = 0x74, | |
1388 | ||
1389 | ARMV7_PERFCTR_PLD_FULL_DEP_STALL_CYCLES = 0x80, | |
1390 | ARMV7_PERFCTR_DATA_WR_DEP_STALL_CYCLES = 0x81, | |
1391 | ARMV7_PERFCTR_ITLB_MISS_DEP_STALL_CYCLES = 0x82, | |
1392 | ARMV7_PERFCTR_DTLB_MISS_DEP_STALL_CYCLES = 0x83, | |
1393 | ARMV7_PERFCTR_MICRO_ITLB_MISS_DEP_STALL_CYCLES = 0x84, | |
1394 | ARMV7_PERFCTR_MICRO_DTLB_MISS_DEP_STALL_CYCLES = 0x85, | |
1395 | ARMV7_PERFCTR_DMB_DEP_STALL_CYCLES = 0x86, | |
1396 | ||
1397 | ARMV7_PERFCTR_INTGR_CLK_ENABLED_CYCLES = 0x8A, | |
1398 | ARMV7_PERFCTR_DATA_ENGINE_CLK_EN_CYCLES = 0x8B, | |
1399 | ||
1400 | ARMV7_PERFCTR_ISB_INST = 0x90, | |
1401 | ARMV7_PERFCTR_DSB_INST = 0x91, | |
1402 | ARMV7_PERFCTR_DMB_INST = 0x92, | |
1403 | ARMV7_PERFCTR_EXT_INTERRUPTS = 0x93, | |
1404 | ||
1405 | ARMV7_PERFCTR_PLE_CACHE_LINE_RQST_COMPLETED = 0xA0, | |
1406 | ARMV7_PERFCTR_PLE_CACHE_LINE_RQST_SKIPPED = 0xA1, | |
1407 | ARMV7_PERFCTR_PLE_FIFO_FLUSH = 0xA2, | |
1408 | ARMV7_PERFCTR_PLE_RQST_COMPLETED = 0xA3, | |
1409 | ARMV7_PERFCTR_PLE_FIFO_OVERFLOW = 0xA4, | |
1410 | ARMV7_PERFCTR_PLE_RQST_PROG = 0xA5 | |
1411 | }; | |
1412 | ||
1413 | /* | |
1414 | * Cortex-A8 HW events mapping | |
1415 | * | |
1416 | * The hardware events that we support. We do support cache operations but | |
1417 | * we have harvard caches and no way to combine instruction and data | |
1418 | * accesses/misses in hardware. | |
1419 | */ | |
1420 | static const unsigned armv7_a8_perf_map[PERF_COUNT_HW_MAX] = { | |
1421 | [PERF_COUNT_HW_CPU_CYCLES] = ARMV7_PERFCTR_CPU_CYCLES, | |
1422 | [PERF_COUNT_HW_INSTRUCTIONS] = ARMV7_PERFCTR_INSTR_EXECUTED, | |
1423 | [PERF_COUNT_HW_CACHE_REFERENCES] = HW_OP_UNSUPPORTED, | |
1424 | [PERF_COUNT_HW_CACHE_MISSES] = HW_OP_UNSUPPORTED, | |
1425 | [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV7_PERFCTR_PC_WRITE, | |
1426 | [PERF_COUNT_HW_BRANCH_MISSES] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, | |
1427 | [PERF_COUNT_HW_BUS_CYCLES] = ARMV7_PERFCTR_CLOCK_CYCLES, | |
1428 | }; | |
1429 | ||
1430 | static const unsigned armv7_a8_perf_cache_map[PERF_COUNT_HW_CACHE_MAX] | |
1431 | [PERF_COUNT_HW_CACHE_OP_MAX] | |
1432 | [PERF_COUNT_HW_CACHE_RESULT_MAX] = { | |
1433 | [C(L1D)] = { | |
1434 | /* | |
1435 | * The performance counters don't differentiate between read | |
1436 | * and write accesses/misses so this isn't strictly correct, | |
1437 | * but it's the best we can do. Writes and reads get | |
1438 | * combined. | |
1439 | */ | |
1440 | [C(OP_READ)] = { | |
1441 | [C(RESULT_ACCESS)] = ARMV7_PERFCTR_DCACHE_ACCESS, | |
1442 | [C(RESULT_MISS)] = ARMV7_PERFCTR_DCACHE_REFILL, | |
1443 | }, | |
1444 | [C(OP_WRITE)] = { | |
1445 | [C(RESULT_ACCESS)] = ARMV7_PERFCTR_DCACHE_ACCESS, | |
1446 | [C(RESULT_MISS)] = ARMV7_PERFCTR_DCACHE_REFILL, | |
1447 | }, | |
1448 | [C(OP_PREFETCH)] = { | |
1449 | [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, | |
1450 | [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, | |
1451 | }, | |
1452 | }, | |
1453 | [C(L1I)] = { | |
1454 | [C(OP_READ)] = { | |
1455 | [C(RESULT_ACCESS)] = ARMV7_PERFCTR_L1_INST, | |
1456 | [C(RESULT_MISS)] = ARMV7_PERFCTR_L1_INST_MISS, | |
1457 | }, | |
1458 | [C(OP_WRITE)] = { | |
1459 | [C(RESULT_ACCESS)] = ARMV7_PERFCTR_L1_INST, | |
1460 | [C(RESULT_MISS)] = ARMV7_PERFCTR_L1_INST_MISS, | |
1461 | }, | |
1462 | [C(OP_PREFETCH)] = { | |
1463 | [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, | |
1464 | [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, | |
1465 | }, | |
1466 | }, | |
1467 | [C(LL)] = { | |
1468 | [C(OP_READ)] = { | |
1469 | [C(RESULT_ACCESS)] = ARMV7_PERFCTR_L2_ACCESS, | |
1470 | [C(RESULT_MISS)] = ARMV7_PERFCTR_L2_CACH_MISS, | |
1471 | }, | |
1472 | [C(OP_WRITE)] = { | |
1473 | [C(RESULT_ACCESS)] = ARMV7_PERFCTR_L2_ACCESS, | |
1474 | [C(RESULT_MISS)] = ARMV7_PERFCTR_L2_CACH_MISS, | |
1475 | }, | |
1476 | [C(OP_PREFETCH)] = { | |
1477 | [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, | |
1478 | [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, | |
1479 | }, | |
1480 | }, | |
1481 | [C(DTLB)] = { | |
1482 | /* | |
1483 | * Only ITLB misses and DTLB refills are supported. | |
1484 | * If users want the DTLB refills misses a raw counter | |
1485 | * must be used. | |
1486 | */ | |
1487 | [C(OP_READ)] = { | |
1488 | [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, | |
1489 | [C(RESULT_MISS)] = ARMV7_PERFCTR_DTLB_REFILL, | |
1490 | }, | |
1491 | [C(OP_WRITE)] = { | |
1492 | [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, | |
1493 | [C(RESULT_MISS)] = ARMV7_PERFCTR_DTLB_REFILL, | |
1494 | }, | |
1495 | [C(OP_PREFETCH)] = { | |
1496 | [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, | |
1497 | [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, | |
1498 | }, | |
1499 | }, | |
1500 | [C(ITLB)] = { | |
1501 | [C(OP_READ)] = { | |
1502 | [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, | |
1503 | [C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_MISS, | |
1504 | }, | |
1505 | [C(OP_WRITE)] = { | |
1506 | [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, | |
1507 | [C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_MISS, | |
1508 | }, | |
1509 | [C(OP_PREFETCH)] = { | |
1510 | [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, | |
1511 | [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, | |
1512 | }, | |
1513 | }, | |
1514 | [C(BPU)] = { | |
1515 | [C(OP_READ)] = { | |
1516 | [C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_WRITE, | |
1517 | [C(RESULT_MISS)] | |
1518 | = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, | |
1519 | }, | |
1520 | [C(OP_WRITE)] = { | |
1521 | [C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_WRITE, | |
1522 | [C(RESULT_MISS)] | |
1523 | = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, | |
1524 | }, | |
1525 | [C(OP_PREFETCH)] = { | |
1526 | [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, | |
1527 | [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, | |
1528 | }, | |
1529 | }, | |
1530 | }; | |
1531 | ||
1532 | /* | |
1533 | * Cortex-A9 HW events mapping | |
1534 | */ | |
1535 | static const unsigned armv7_a9_perf_map[PERF_COUNT_HW_MAX] = { | |
1536 | [PERF_COUNT_HW_CPU_CYCLES] = ARMV7_PERFCTR_CPU_CYCLES, | |
1537 | [PERF_COUNT_HW_INSTRUCTIONS] = | |
1538 | ARMV7_PERFCTR_INST_OUT_OF_RENAME_STAGE, | |
1539 | [PERF_COUNT_HW_CACHE_REFERENCES] = ARMV7_PERFCTR_COHERENT_LINE_HIT, | |
1540 | [PERF_COUNT_HW_CACHE_MISSES] = ARMV7_PERFCTR_COHERENT_LINE_MISS, | |
1541 | [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV7_PERFCTR_PC_WRITE, | |
1542 | [PERF_COUNT_HW_BRANCH_MISSES] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, | |
1543 | [PERF_COUNT_HW_BUS_CYCLES] = ARMV7_PERFCTR_CLOCK_CYCLES, | |
1544 | }; | |
1545 | ||
1546 | static const unsigned armv7_a9_perf_cache_map[PERF_COUNT_HW_CACHE_MAX] | |
1547 | [PERF_COUNT_HW_CACHE_OP_MAX] | |
1548 | [PERF_COUNT_HW_CACHE_RESULT_MAX] = { | |
1549 | [C(L1D)] = { | |
1550 | /* | |
1551 | * The performance counters don't differentiate between read | |
1552 | * and write accesses/misses so this isn't strictly correct, | |
1553 | * but it's the best we can do. Writes and reads get | |
1554 | * combined. | |
1555 | */ | |
1556 | [C(OP_READ)] = { | |
1557 | [C(RESULT_ACCESS)] = ARMV7_PERFCTR_DCACHE_ACCESS, | |
1558 | [C(RESULT_MISS)] = ARMV7_PERFCTR_DCACHE_REFILL, | |
1559 | }, | |
1560 | [C(OP_WRITE)] = { | |
1561 | [C(RESULT_ACCESS)] = ARMV7_PERFCTR_DCACHE_ACCESS, | |
1562 | [C(RESULT_MISS)] = ARMV7_PERFCTR_DCACHE_REFILL, | |
1563 | }, | |
1564 | [C(OP_PREFETCH)] = { | |
1565 | [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, | |
1566 | [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, | |
1567 | }, | |
1568 | }, | |
1569 | [C(L1I)] = { | |
1570 | [C(OP_READ)] = { | |
1571 | [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, | |
1572 | [C(RESULT_MISS)] = ARMV7_PERFCTR_IFETCH_MISS, | |
1573 | }, | |
1574 | [C(OP_WRITE)] = { | |
1575 | [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, | |
1576 | [C(RESULT_MISS)] = ARMV7_PERFCTR_IFETCH_MISS, | |
1577 | }, | |
1578 | [C(OP_PREFETCH)] = { | |
1579 | [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, | |
1580 | [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, | |
1581 | }, | |
1582 | }, | |
1583 | [C(LL)] = { | |
1584 | [C(OP_READ)] = { | |
1585 | [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, | |
1586 | [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, | |
1587 | }, | |
1588 | [C(OP_WRITE)] = { | |
1589 | [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, | |
1590 | [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, | |
1591 | }, | |
1592 | [C(OP_PREFETCH)] = { | |
1593 | [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, | |
1594 | [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, | |
1595 | }, | |
1596 | }, | |
1597 | [C(DTLB)] = { | |
1598 | /* | |
1599 | * Only ITLB misses and DTLB refills are supported. | |
1600 | * If users want the DTLB refills misses a raw counter | |
1601 | * must be used. | |
1602 | */ | |
1603 | [C(OP_READ)] = { | |
1604 | [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, | |
1605 | [C(RESULT_MISS)] = ARMV7_PERFCTR_DTLB_REFILL, | |
1606 | }, | |
1607 | [C(OP_WRITE)] = { | |
1608 | [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, | |
1609 | [C(RESULT_MISS)] = ARMV7_PERFCTR_DTLB_REFILL, | |
1610 | }, | |
1611 | [C(OP_PREFETCH)] = { | |
1612 | [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, | |
1613 | [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, | |
1614 | }, | |
1615 | }, | |
1616 | [C(ITLB)] = { | |
1617 | [C(OP_READ)] = { | |
1618 | [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, | |
1619 | [C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_MISS, | |
1620 | }, | |
1621 | [C(OP_WRITE)] = { | |
1622 | [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, | |
1623 | [C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_MISS, | |
1624 | }, | |
1625 | [C(OP_PREFETCH)] = { | |
1626 | [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, | |
1627 | [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, | |
1628 | }, | |
1629 | }, | |
1630 | [C(BPU)] = { | |
1631 | [C(OP_READ)] = { | |
1632 | [C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_WRITE, | |
1633 | [C(RESULT_MISS)] | |
1634 | = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, | |
1635 | }, | |
1636 | [C(OP_WRITE)] = { | |
1637 | [C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_WRITE, | |
1638 | [C(RESULT_MISS)] | |
1639 | = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, | |
1640 | }, | |
1641 | [C(OP_PREFETCH)] = { | |
1642 | [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, | |
1643 | [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, | |
1644 | }, | |
1645 | }, | |
1646 | }; | |
1647 | ||
1648 | /* | |
1649 | * Perf Events counters | |
1650 | */ | |
1651 | enum armv7_counters { | |
1652 | ARMV7_CYCLE_COUNTER = 1, /* Cycle counter */ | |
1653 | ARMV7_COUNTER0 = 2, /* First event counter */ | |
1654 | }; | |
1655 | ||
1656 | /* | |
1657 | * The cycle counter is ARMV7_CYCLE_COUNTER. | |
1658 | * The first event counter is ARMV7_COUNTER0. | |
1659 | * The last event counter is (ARMV7_COUNTER0 + armpmu->num_events - 1). | |
1660 | */ | |
1661 | #define ARMV7_COUNTER_LAST (ARMV7_COUNTER0 + armpmu->num_events - 1) | |
1662 | ||
1663 | /* | |
1664 | * ARMv7 low level PMNC access | |
1665 | */ | |
1666 | ||
1667 | /* | |
1668 | * Per-CPU PMNC: config reg | |
1669 | */ | |
1670 | #define ARMV7_PMNC_E (1 << 0) /* Enable all counters */ | |
1671 | #define ARMV7_PMNC_P (1 << 1) /* Reset all counters */ | |
1672 | #define ARMV7_PMNC_C (1 << 2) /* Cycle counter reset */ | |
1673 | #define ARMV7_PMNC_D (1 << 3) /* CCNT counts every 64th cpu cycle */ | |
1674 | #define ARMV7_PMNC_X (1 << 4) /* Export to ETM */ | |
1675 | #define ARMV7_PMNC_DP (1 << 5) /* Disable CCNT if non-invasive debug*/ | |
1676 | #define ARMV7_PMNC_N_SHIFT 11 /* Number of counters supported */ | |
1677 | #define ARMV7_PMNC_N_MASK 0x1f | |
1678 | #define ARMV7_PMNC_MASK 0x3f /* Mask for writable bits */ | |
1679 | ||
1680 | /* | |
1681 | * Available counters | |
1682 | */ | |
1683 | #define ARMV7_CNT0 0 /* First event counter */ | |
1684 | #define ARMV7_CCNT 31 /* Cycle counter */ | |
1685 | ||
1686 | /* Perf Event to low level counters mapping */ | |
1687 | #define ARMV7_EVENT_CNT_TO_CNTx (ARMV7_COUNTER0 - ARMV7_CNT0) | |
1688 | ||
1689 | /* | |
1690 | * CNTENS: counters enable reg | |
1691 | */ | |
1692 | #define ARMV7_CNTENS_P(idx) (1 << (idx - ARMV7_EVENT_CNT_TO_CNTx)) | |
1693 | #define ARMV7_CNTENS_C (1 << ARMV7_CCNT) | |
1694 | ||
1695 | /* | |
1696 | * CNTENC: counters disable reg | |
1697 | */ | |
1698 | #define ARMV7_CNTENC_P(idx) (1 << (idx - ARMV7_EVENT_CNT_TO_CNTx)) | |
1699 | #define ARMV7_CNTENC_C (1 << ARMV7_CCNT) | |
1700 | ||
1701 | /* | |
1702 | * INTENS: counters overflow interrupt enable reg | |
1703 | */ | |
1704 | #define ARMV7_INTENS_P(idx) (1 << (idx - ARMV7_EVENT_CNT_TO_CNTx)) | |
1705 | #define ARMV7_INTENS_C (1 << ARMV7_CCNT) | |
1706 | ||
1707 | /* | |
1708 | * INTENC: counters overflow interrupt disable reg | |
1709 | */ | |
1710 | #define ARMV7_INTENC_P(idx) (1 << (idx - ARMV7_EVENT_CNT_TO_CNTx)) | |
1711 | #define ARMV7_INTENC_C (1 << ARMV7_CCNT) | |
1712 | ||
1713 | /* | |
1714 | * EVTSEL: Event selection reg | |
1715 | */ | |
d10fca9f | 1716 | #define ARMV7_EVTSEL_MASK 0xff /* Mask for writable bits */ |
796d1295 JP |
1717 | |
1718 | /* | |
1719 | * SELECT: Counter selection reg | |
1720 | */ | |
1721 | #define ARMV7_SELECT_MASK 0x1f /* Mask for writable bits */ | |
1722 | ||
1723 | /* | |
1724 | * FLAG: counters overflow flag status reg | |
1725 | */ | |
1726 | #define ARMV7_FLAG_P(idx) (1 << (idx - ARMV7_EVENT_CNT_TO_CNTx)) | |
1727 | #define ARMV7_FLAG_C (1 << ARMV7_CCNT) | |
1728 | #define ARMV7_FLAG_MASK 0xffffffff /* Mask for writable bits */ | |
1729 | #define ARMV7_OVERFLOWED_MASK ARMV7_FLAG_MASK | |
1730 | ||
1731 | static inline unsigned long armv7_pmnc_read(void) | |
1732 | { | |
1733 | u32 val; | |
1734 | asm volatile("mrc p15, 0, %0, c9, c12, 0" : "=r"(val)); | |
1735 | return val; | |
1736 | } | |
1737 | ||
1738 | static inline void armv7_pmnc_write(unsigned long val) | |
1739 | { | |
1740 | val &= ARMV7_PMNC_MASK; | |
1741 | asm volatile("mcr p15, 0, %0, c9, c12, 0" : : "r"(val)); | |
1742 | } | |
1743 | ||
1744 | static inline int armv7_pmnc_has_overflowed(unsigned long pmnc) | |
1745 | { | |
1746 | return pmnc & ARMV7_OVERFLOWED_MASK; | |
1747 | } | |
1748 | ||
1749 | static inline int armv7_pmnc_counter_has_overflowed(unsigned long pmnc, | |
1750 | enum armv7_counters counter) | |
1751 | { | |
c3b291d9 | 1752 | int ret = 0; |
796d1295 JP |
1753 | |
1754 | if (counter == ARMV7_CYCLE_COUNTER) | |
1755 | ret = pmnc & ARMV7_FLAG_C; | |
1756 | else if ((counter >= ARMV7_COUNTER0) && (counter <= ARMV7_COUNTER_LAST)) | |
1757 | ret = pmnc & ARMV7_FLAG_P(counter); | |
1758 | else | |
1759 | pr_err("CPU%u checking wrong counter %d overflow status\n", | |
1760 | smp_processor_id(), counter); | |
1761 | ||
1762 | return ret; | |
1763 | } | |
1764 | ||
1765 | static inline int armv7_pmnc_select_counter(unsigned int idx) | |
1766 | { | |
1767 | u32 val; | |
1768 | ||
1769 | if ((idx < ARMV7_COUNTER0) || (idx > ARMV7_COUNTER_LAST)) { | |
1770 | pr_err("CPU%u selecting wrong PMNC counter" | |
1771 | " %d\n", smp_processor_id(), idx); | |
1772 | return -1; | |
1773 | } | |
1774 | ||
1775 | val = (idx - ARMV7_EVENT_CNT_TO_CNTx) & ARMV7_SELECT_MASK; | |
1776 | asm volatile("mcr p15, 0, %0, c9, c12, 5" : : "r" (val)); | |
1777 | ||
1778 | return idx; | |
1779 | } | |
1780 | ||
1781 | static inline u32 armv7pmu_read_counter(int idx) | |
1782 | { | |
1783 | unsigned long value = 0; | |
1784 | ||
1785 | if (idx == ARMV7_CYCLE_COUNTER) | |
1786 | asm volatile("mrc p15, 0, %0, c9, c13, 0" : "=r" (value)); | |
1787 | else if ((idx >= ARMV7_COUNTER0) && (idx <= ARMV7_COUNTER_LAST)) { | |
1788 | if (armv7_pmnc_select_counter(idx) == idx) | |
1789 | asm volatile("mrc p15, 0, %0, c9, c13, 2" | |
1790 | : "=r" (value)); | |
1791 | } else | |
1792 | pr_err("CPU%u reading wrong counter %d\n", | |
1793 | smp_processor_id(), idx); | |
1794 | ||
1795 | return value; | |
1796 | } | |
1797 | ||
1798 | static inline void armv7pmu_write_counter(int idx, u32 value) | |
1799 | { | |
1800 | if (idx == ARMV7_CYCLE_COUNTER) | |
1801 | asm volatile("mcr p15, 0, %0, c9, c13, 0" : : "r" (value)); | |
1802 | else if ((idx >= ARMV7_COUNTER0) && (idx <= ARMV7_COUNTER_LAST)) { | |
1803 | if (armv7_pmnc_select_counter(idx) == idx) | |
1804 | asm volatile("mcr p15, 0, %0, c9, c13, 2" | |
1805 | : : "r" (value)); | |
1806 | } else | |
1807 | pr_err("CPU%u writing wrong counter %d\n", | |
1808 | smp_processor_id(), idx); | |
1809 | } | |
1810 | ||
1811 | static inline void armv7_pmnc_write_evtsel(unsigned int idx, u32 val) | |
1812 | { | |
1813 | if (armv7_pmnc_select_counter(idx) == idx) { | |
1814 | val &= ARMV7_EVTSEL_MASK; | |
1815 | asm volatile("mcr p15, 0, %0, c9, c13, 1" : : "r" (val)); | |
1816 | } | |
1817 | } | |
1818 | ||
1819 | static inline u32 armv7_pmnc_enable_counter(unsigned int idx) | |
1820 | { | |
1821 | u32 val; | |
1822 | ||
1823 | if ((idx != ARMV7_CYCLE_COUNTER) && | |
1824 | ((idx < ARMV7_COUNTER0) || (idx > ARMV7_COUNTER_LAST))) { | |
1825 | pr_err("CPU%u enabling wrong PMNC counter" | |
1826 | " %d\n", smp_processor_id(), idx); | |
1827 | return -1; | |
1828 | } | |
1829 | ||
1830 | if (idx == ARMV7_CYCLE_COUNTER) | |
1831 | val = ARMV7_CNTENS_C; | |
1832 | else | |
1833 | val = ARMV7_CNTENS_P(idx); | |
1834 | ||
1835 | asm volatile("mcr p15, 0, %0, c9, c12, 1" : : "r" (val)); | |
1836 | ||
1837 | return idx; | |
1838 | } | |
1839 | ||
1840 | static inline u32 armv7_pmnc_disable_counter(unsigned int idx) | |
1841 | { | |
1842 | u32 val; | |
1843 | ||
1844 | ||
1845 | if ((idx != ARMV7_CYCLE_COUNTER) && | |
1846 | ((idx < ARMV7_COUNTER0) || (idx > ARMV7_COUNTER_LAST))) { | |
1847 | pr_err("CPU%u disabling wrong PMNC counter" | |
1848 | " %d\n", smp_processor_id(), idx); | |
1849 | return -1; | |
1850 | } | |
1851 | ||
1852 | if (idx == ARMV7_CYCLE_COUNTER) | |
1853 | val = ARMV7_CNTENC_C; | |
1854 | else | |
1855 | val = ARMV7_CNTENC_P(idx); | |
1856 | ||
1857 | asm volatile("mcr p15, 0, %0, c9, c12, 2" : : "r" (val)); | |
1858 | ||
1859 | return idx; | |
1860 | } | |
1861 | ||
1862 | static inline u32 armv7_pmnc_enable_intens(unsigned int idx) | |
1863 | { | |
1864 | u32 val; | |
1865 | ||
1866 | if ((idx != ARMV7_CYCLE_COUNTER) && | |
1867 | ((idx < ARMV7_COUNTER0) || (idx > ARMV7_COUNTER_LAST))) { | |
1868 | pr_err("CPU%u enabling wrong PMNC counter" | |
1869 | " interrupt enable %d\n", smp_processor_id(), idx); | |
1870 | return -1; | |
1871 | } | |
1872 | ||
1873 | if (idx == ARMV7_CYCLE_COUNTER) | |
1874 | val = ARMV7_INTENS_C; | |
1875 | else | |
1876 | val = ARMV7_INTENS_P(idx); | |
1877 | ||
1878 | asm volatile("mcr p15, 0, %0, c9, c14, 1" : : "r" (val)); | |
1879 | ||
1880 | return idx; | |
1881 | } | |
1882 | ||
1883 | static inline u32 armv7_pmnc_disable_intens(unsigned int idx) | |
1884 | { | |
1885 | u32 val; | |
1886 | ||
1887 | if ((idx != ARMV7_CYCLE_COUNTER) && | |
1888 | ((idx < ARMV7_COUNTER0) || (idx > ARMV7_COUNTER_LAST))) { | |
1889 | pr_err("CPU%u disabling wrong PMNC counter" | |
1890 | " interrupt enable %d\n", smp_processor_id(), idx); | |
1891 | return -1; | |
1892 | } | |
1893 | ||
1894 | if (idx == ARMV7_CYCLE_COUNTER) | |
1895 | val = ARMV7_INTENC_C; | |
1896 | else | |
1897 | val = ARMV7_INTENC_P(idx); | |
1898 | ||
1899 | asm volatile("mcr p15, 0, %0, c9, c14, 2" : : "r" (val)); | |
1900 | ||
1901 | return idx; | |
1902 | } | |
1903 | ||
1904 | static inline u32 armv7_pmnc_getreset_flags(void) | |
1905 | { | |
1906 | u32 val; | |
1907 | ||
1908 | /* Read */ | |
1909 | asm volatile("mrc p15, 0, %0, c9, c12, 3" : "=r" (val)); | |
1910 | ||
1911 | /* Write to clear flags */ | |
1912 | val &= ARMV7_FLAG_MASK; | |
1913 | asm volatile("mcr p15, 0, %0, c9, c12, 3" : : "r" (val)); | |
1914 | ||
1915 | return val; | |
1916 | } | |
1917 | ||
1918 | #ifdef DEBUG | |
1919 | static void armv7_pmnc_dump_regs(void) | |
1920 | { | |
1921 | u32 val; | |
1922 | unsigned int cnt; | |
1923 | ||
1924 | printk(KERN_INFO "PMNC registers dump:\n"); | |
1925 | ||
1926 | asm volatile("mrc p15, 0, %0, c9, c12, 0" : "=r" (val)); | |
1927 | printk(KERN_INFO "PMNC =0x%08x\n", val); | |
1928 | ||
1929 | asm volatile("mrc p15, 0, %0, c9, c12, 1" : "=r" (val)); | |
1930 | printk(KERN_INFO "CNTENS=0x%08x\n", val); | |
1931 | ||
1932 | asm volatile("mrc p15, 0, %0, c9, c14, 1" : "=r" (val)); | |
1933 | printk(KERN_INFO "INTENS=0x%08x\n", val); | |
1934 | ||
1935 | asm volatile("mrc p15, 0, %0, c9, c12, 3" : "=r" (val)); | |
1936 | printk(KERN_INFO "FLAGS =0x%08x\n", val); | |
1937 | ||
1938 | asm volatile("mrc p15, 0, %0, c9, c12, 5" : "=r" (val)); | |
1939 | printk(KERN_INFO "SELECT=0x%08x\n", val); | |
1940 | ||
1941 | asm volatile("mrc p15, 0, %0, c9, c13, 0" : "=r" (val)); | |
1942 | printk(KERN_INFO "CCNT =0x%08x\n", val); | |
1943 | ||
1944 | for (cnt = ARMV7_COUNTER0; cnt < ARMV7_COUNTER_LAST; cnt++) { | |
1945 | armv7_pmnc_select_counter(cnt); | |
1946 | asm volatile("mrc p15, 0, %0, c9, c13, 2" : "=r" (val)); | |
1947 | printk(KERN_INFO "CNT[%d] count =0x%08x\n", | |
1948 | cnt-ARMV7_EVENT_CNT_TO_CNTx, val); | |
1949 | asm volatile("mrc p15, 0, %0, c9, c13, 1" : "=r" (val)); | |
1950 | printk(KERN_INFO "CNT[%d] evtsel=0x%08x\n", | |
1951 | cnt-ARMV7_EVENT_CNT_TO_CNTx, val); | |
1952 | } | |
1953 | } | |
1954 | #endif | |
1955 | ||
1956 | void armv7pmu_enable_event(struct hw_perf_event *hwc, int idx) | |
1957 | { | |
1958 | unsigned long flags; | |
1959 | ||
1960 | /* | |
1961 | * Enable counter and interrupt, and set the counter to count | |
1962 | * the event that we're interested in. | |
1963 | */ | |
1964 | spin_lock_irqsave(&pmu_lock, flags); | |
1965 | ||
1966 | /* | |
1967 | * Disable counter | |
1968 | */ | |
1969 | armv7_pmnc_disable_counter(idx); | |
1970 | ||
1971 | /* | |
1972 | * Set event (if destined for PMNx counters) | |
1973 | * We don't need to set the event if it's a cycle count | |
1974 | */ | |
1975 | if (idx != ARMV7_CYCLE_COUNTER) | |
1976 | armv7_pmnc_write_evtsel(idx, hwc->config_base); | |
1977 | ||
1978 | /* | |
1979 | * Enable interrupt for this counter | |
1980 | */ | |
1981 | armv7_pmnc_enable_intens(idx); | |
1982 | ||
1983 | /* | |
1984 | * Enable counter | |
1985 | */ | |
1986 | armv7_pmnc_enable_counter(idx); | |
1987 | ||
1988 | spin_unlock_irqrestore(&pmu_lock, flags); | |
1989 | } | |
1990 | ||
1991 | static void armv7pmu_disable_event(struct hw_perf_event *hwc, int idx) | |
1992 | { | |
1993 | unsigned long flags; | |
1994 | ||
1995 | /* | |
1996 | * Disable counter and interrupt | |
1997 | */ | |
1998 | spin_lock_irqsave(&pmu_lock, flags); | |
1999 | ||
2000 | /* | |
2001 | * Disable counter | |
2002 | */ | |
2003 | armv7_pmnc_disable_counter(idx); | |
2004 | ||
2005 | /* | |
2006 | * Disable interrupt for this counter | |
2007 | */ | |
2008 | armv7_pmnc_disable_intens(idx); | |
2009 | ||
2010 | spin_unlock_irqrestore(&pmu_lock, flags); | |
2011 | } | |
2012 | ||
2013 | static irqreturn_t armv7pmu_handle_irq(int irq_num, void *dev) | |
2014 | { | |
2015 | unsigned long pmnc; | |
2016 | struct perf_sample_data data; | |
2017 | struct cpu_hw_events *cpuc; | |
2018 | struct pt_regs *regs; | |
2019 | int idx; | |
2020 | ||
2021 | /* | |
2022 | * Get and reset the IRQ flags | |
2023 | */ | |
2024 | pmnc = armv7_pmnc_getreset_flags(); | |
2025 | ||
2026 | /* | |
2027 | * Did an overflow occur? | |
2028 | */ | |
2029 | if (!armv7_pmnc_has_overflowed(pmnc)) | |
2030 | return IRQ_NONE; | |
2031 | ||
2032 | /* | |
2033 | * Handle the counter(s) overflow(s) | |
2034 | */ | |
2035 | regs = get_irq_regs(); | |
2036 | ||
dc1d628a | 2037 | perf_sample_data_init(&data, 0); |
796d1295 JP |
2038 | |
2039 | cpuc = &__get_cpu_var(cpu_hw_events); | |
2040 | for (idx = 0; idx <= armpmu->num_events; ++idx) { | |
2041 | struct perf_event *event = cpuc->events[idx]; | |
2042 | struct hw_perf_event *hwc; | |
2043 | ||
2044 | if (!test_bit(idx, cpuc->active_mask)) | |
2045 | continue; | |
2046 | ||
2047 | /* | |
2048 | * We have a single interrupt for all counters. Check that | |
2049 | * each counter has overflowed before we process it. | |
2050 | */ | |
2051 | if (!armv7_pmnc_counter_has_overflowed(pmnc, idx)) | |
2052 | continue; | |
2053 | ||
2054 | hwc = &event->hw; | |
2055 | armpmu_event_update(event, hwc, idx); | |
2056 | data.period = event->hw.last_period; | |
2057 | if (!armpmu_event_set_period(event, hwc, idx)) | |
2058 | continue; | |
2059 | ||
2060 | if (perf_event_overflow(event, 0, &data, regs)) | |
2061 | armpmu->disable(hwc, idx); | |
2062 | } | |
2063 | ||
2064 | /* | |
2065 | * Handle the pending perf events. | |
2066 | * | |
25d35847 WD |
2067 | * Note: this call *must* be run with interrupts disabled. For |
2068 | * platforms that can have the PMU interrupts raised as an NMI, this | |
796d1295 JP |
2069 | * will not work. |
2070 | */ | |
e360adbe | 2071 | irq_work_run(); |
796d1295 JP |
2072 | |
2073 | return IRQ_HANDLED; | |
2074 | } | |
2075 | ||
2076 | static void armv7pmu_start(void) | |
2077 | { | |
2078 | unsigned long flags; | |
2079 | ||
2080 | spin_lock_irqsave(&pmu_lock, flags); | |
2081 | /* Enable all counters */ | |
2082 | armv7_pmnc_write(armv7_pmnc_read() | ARMV7_PMNC_E); | |
2083 | spin_unlock_irqrestore(&pmu_lock, flags); | |
2084 | } | |
2085 | ||
2086 | static void armv7pmu_stop(void) | |
2087 | { | |
2088 | unsigned long flags; | |
2089 | ||
2090 | spin_lock_irqsave(&pmu_lock, flags); | |
2091 | /* Disable all counters */ | |
2092 | armv7_pmnc_write(armv7_pmnc_read() & ~ARMV7_PMNC_E); | |
2093 | spin_unlock_irqrestore(&pmu_lock, flags); | |
2094 | } | |
2095 | ||
2096 | static inline int armv7_a8_pmu_event_map(int config) | |
2097 | { | |
2098 | int mapping = armv7_a8_perf_map[config]; | |
2099 | if (HW_OP_UNSUPPORTED == mapping) | |
2100 | mapping = -EOPNOTSUPP; | |
2101 | return mapping; | |
2102 | } | |
2103 | ||
2104 | static inline int armv7_a9_pmu_event_map(int config) | |
2105 | { | |
2106 | int mapping = armv7_a9_perf_map[config]; | |
2107 | if (HW_OP_UNSUPPORTED == mapping) | |
2108 | mapping = -EOPNOTSUPP; | |
2109 | return mapping; | |
2110 | } | |
2111 | ||
2112 | static u64 armv7pmu_raw_event(u64 config) | |
2113 | { | |
2114 | return config & 0xff; | |
2115 | } | |
2116 | ||
2117 | static int armv7pmu_get_event_idx(struct cpu_hw_events *cpuc, | |
2118 | struct hw_perf_event *event) | |
2119 | { | |
2120 | int idx; | |
2121 | ||
2122 | /* Always place a cycle counter into the cycle counter. */ | |
2123 | if (event->config_base == ARMV7_PERFCTR_CPU_CYCLES) { | |
2124 | if (test_and_set_bit(ARMV7_CYCLE_COUNTER, cpuc->used_mask)) | |
2125 | return -EAGAIN; | |
2126 | ||
2127 | return ARMV7_CYCLE_COUNTER; | |
2128 | } else { | |
2129 | /* | |
2130 | * For anything other than a cycle counter, try and use | |
2131 | * the events counters | |
2132 | */ | |
2133 | for (idx = ARMV7_COUNTER0; idx <= armpmu->num_events; ++idx) { | |
2134 | if (!test_and_set_bit(idx, cpuc->used_mask)) | |
2135 | return idx; | |
2136 | } | |
2137 | ||
2138 | /* The counters are all in use. */ | |
2139 | return -EAGAIN; | |
2140 | } | |
2141 | } | |
2142 | ||
2143 | static struct arm_pmu armv7pmu = { | |
2144 | .handle_irq = armv7pmu_handle_irq, | |
2145 | .enable = armv7pmu_enable_event, | |
2146 | .disable = armv7pmu_disable_event, | |
2147 | .raw_event = armv7pmu_raw_event, | |
2148 | .read_counter = armv7pmu_read_counter, | |
2149 | .write_counter = armv7pmu_write_counter, | |
2150 | .get_event_idx = armv7pmu_get_event_idx, | |
2151 | .start = armv7pmu_start, | |
2152 | .stop = armv7pmu_stop, | |
2153 | .max_period = (1LLU << 32) - 1, | |
2154 | }; | |
2155 | ||
2156 | static u32 __init armv7_reset_read_pmnc(void) | |
2157 | { | |
2158 | u32 nb_cnt; | |
2159 | ||
2160 | /* Initialize & Reset PMNC: C and P bits */ | |
2161 | armv7_pmnc_write(ARMV7_PMNC_P | ARMV7_PMNC_C); | |
2162 | ||
2163 | /* Read the nb of CNTx counters supported from PMNC */ | |
2164 | nb_cnt = (armv7_pmnc_read() >> ARMV7_PMNC_N_SHIFT) & ARMV7_PMNC_N_MASK; | |
2165 | ||
2166 | /* Add the CPU cycles counter and return */ | |
2167 | return nb_cnt + 1; | |
2168 | } | |
2169 | ||
49e6a32f WD |
2170 | /* |
2171 | * ARMv5 [xscale] Performance counter handling code. | |
2172 | * | |
2173 | * Based on xscale OProfile code. | |
2174 | * | |
2175 | * There are two variants of the xscale PMU that we support: | |
2176 | * - xscale1pmu: 2 event counters and a cycle counter | |
2177 | * - xscale2pmu: 4 event counters and a cycle counter | |
2178 | * The two variants share event definitions, but have different | |
2179 | * PMU structures. | |
2180 | */ | |
2181 | ||
2182 | enum xscale_perf_types { | |
2183 | XSCALE_PERFCTR_ICACHE_MISS = 0x00, | |
2184 | XSCALE_PERFCTR_ICACHE_NO_DELIVER = 0x01, | |
2185 | XSCALE_PERFCTR_DATA_STALL = 0x02, | |
2186 | XSCALE_PERFCTR_ITLB_MISS = 0x03, | |
2187 | XSCALE_PERFCTR_DTLB_MISS = 0x04, | |
2188 | XSCALE_PERFCTR_BRANCH = 0x05, | |
2189 | XSCALE_PERFCTR_BRANCH_MISS = 0x06, | |
2190 | XSCALE_PERFCTR_INSTRUCTION = 0x07, | |
2191 | XSCALE_PERFCTR_DCACHE_FULL_STALL = 0x08, | |
2192 | XSCALE_PERFCTR_DCACHE_FULL_STALL_CONTIG = 0x09, | |
2193 | XSCALE_PERFCTR_DCACHE_ACCESS = 0x0A, | |
2194 | XSCALE_PERFCTR_DCACHE_MISS = 0x0B, | |
2195 | XSCALE_PERFCTR_DCACHE_WRITE_BACK = 0x0C, | |
2196 | XSCALE_PERFCTR_PC_CHANGED = 0x0D, | |
2197 | XSCALE_PERFCTR_BCU_REQUEST = 0x10, | |
2198 | XSCALE_PERFCTR_BCU_FULL = 0x11, | |
2199 | XSCALE_PERFCTR_BCU_DRAIN = 0x12, | |
2200 | XSCALE_PERFCTR_BCU_ECC_NO_ELOG = 0x14, | |
2201 | XSCALE_PERFCTR_BCU_1_BIT_ERR = 0x15, | |
2202 | XSCALE_PERFCTR_RMW = 0x16, | |
2203 | /* XSCALE_PERFCTR_CCNT is not hardware defined */ | |
2204 | XSCALE_PERFCTR_CCNT = 0xFE, | |
2205 | XSCALE_PERFCTR_UNUSED = 0xFF, | |
2206 | }; | |
2207 | ||
2208 | enum xscale_counters { | |
2209 | XSCALE_CYCLE_COUNTER = 1, | |
2210 | XSCALE_COUNTER0, | |
2211 | XSCALE_COUNTER1, | |
2212 | XSCALE_COUNTER2, | |
2213 | XSCALE_COUNTER3, | |
2214 | }; | |
2215 | ||
2216 | static const unsigned xscale_perf_map[PERF_COUNT_HW_MAX] = { | |
2217 | [PERF_COUNT_HW_CPU_CYCLES] = XSCALE_PERFCTR_CCNT, | |
2218 | [PERF_COUNT_HW_INSTRUCTIONS] = XSCALE_PERFCTR_INSTRUCTION, | |
2219 | [PERF_COUNT_HW_CACHE_REFERENCES] = HW_OP_UNSUPPORTED, | |
2220 | [PERF_COUNT_HW_CACHE_MISSES] = HW_OP_UNSUPPORTED, | |
2221 | [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = XSCALE_PERFCTR_BRANCH, | |
2222 | [PERF_COUNT_HW_BRANCH_MISSES] = XSCALE_PERFCTR_BRANCH_MISS, | |
2223 | [PERF_COUNT_HW_BUS_CYCLES] = HW_OP_UNSUPPORTED, | |
2224 | }; | |
2225 | ||
2226 | static const unsigned xscale_perf_cache_map[PERF_COUNT_HW_CACHE_MAX] | |
2227 | [PERF_COUNT_HW_CACHE_OP_MAX] | |
2228 | [PERF_COUNT_HW_CACHE_RESULT_MAX] = { | |
2229 | [C(L1D)] = { | |
2230 | [C(OP_READ)] = { | |
2231 | [C(RESULT_ACCESS)] = XSCALE_PERFCTR_DCACHE_ACCESS, | |
2232 | [C(RESULT_MISS)] = XSCALE_PERFCTR_DCACHE_MISS, | |
2233 | }, | |
2234 | [C(OP_WRITE)] = { | |
2235 | [C(RESULT_ACCESS)] = XSCALE_PERFCTR_DCACHE_ACCESS, | |
2236 | [C(RESULT_MISS)] = XSCALE_PERFCTR_DCACHE_MISS, | |
2237 | }, | |
2238 | [C(OP_PREFETCH)] = { | |
2239 | [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, | |
2240 | [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, | |
2241 | }, | |
2242 | }, | |
2243 | [C(L1I)] = { | |
2244 | [C(OP_READ)] = { | |
2245 | [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, | |
2246 | [C(RESULT_MISS)] = XSCALE_PERFCTR_ICACHE_MISS, | |
2247 | }, | |
2248 | [C(OP_WRITE)] = { | |
2249 | [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, | |
2250 | [C(RESULT_MISS)] = XSCALE_PERFCTR_ICACHE_MISS, | |
2251 | }, | |
2252 | [C(OP_PREFETCH)] = { | |
2253 | [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, | |
2254 | [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, | |
2255 | }, | |
2256 | }, | |
2257 | [C(LL)] = { | |
2258 | [C(OP_READ)] = { | |
2259 | [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, | |
2260 | [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, | |
2261 | }, | |
2262 | [C(OP_WRITE)] = { | |
2263 | [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, | |
2264 | [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, | |
2265 | }, | |
2266 | [C(OP_PREFETCH)] = { | |
2267 | [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, | |
2268 | [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, | |
2269 | }, | |
2270 | }, | |
2271 | [C(DTLB)] = { | |
2272 | [C(OP_READ)] = { | |
2273 | [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, | |
2274 | [C(RESULT_MISS)] = XSCALE_PERFCTR_DTLB_MISS, | |
2275 | }, | |
2276 | [C(OP_WRITE)] = { | |
2277 | [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, | |
2278 | [C(RESULT_MISS)] = XSCALE_PERFCTR_DTLB_MISS, | |
2279 | }, | |
2280 | [C(OP_PREFETCH)] = { | |
2281 | [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, | |
2282 | [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, | |
2283 | }, | |
2284 | }, | |
2285 | [C(ITLB)] = { | |
2286 | [C(OP_READ)] = { | |
2287 | [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, | |
2288 | [C(RESULT_MISS)] = XSCALE_PERFCTR_ITLB_MISS, | |
2289 | }, | |
2290 | [C(OP_WRITE)] = { | |
2291 | [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, | |
2292 | [C(RESULT_MISS)] = XSCALE_PERFCTR_ITLB_MISS, | |
2293 | }, | |
2294 | [C(OP_PREFETCH)] = { | |
2295 | [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, | |
2296 | [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, | |
2297 | }, | |
2298 | }, | |
2299 | [C(BPU)] = { | |
2300 | [C(OP_READ)] = { | |
2301 | [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, | |
2302 | [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, | |
2303 | }, | |
2304 | [C(OP_WRITE)] = { | |
2305 | [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, | |
2306 | [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, | |
2307 | }, | |
2308 | [C(OP_PREFETCH)] = { | |
2309 | [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, | |
2310 | [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, | |
2311 | }, | |
2312 | }, | |
2313 | }; | |
2314 | ||
2315 | #define XSCALE_PMU_ENABLE 0x001 | |
2316 | #define XSCALE_PMN_RESET 0x002 | |
2317 | #define XSCALE_CCNT_RESET 0x004 | |
2318 | #define XSCALE_PMU_RESET (CCNT_RESET | PMN_RESET) | |
2319 | #define XSCALE_PMU_CNT64 0x008 | |
2320 | ||
2321 | static inline int | |
2322 | xscalepmu_event_map(int config) | |
2323 | { | |
2324 | int mapping = xscale_perf_map[config]; | |
2325 | if (HW_OP_UNSUPPORTED == mapping) | |
2326 | mapping = -EOPNOTSUPP; | |
2327 | return mapping; | |
2328 | } | |
2329 | ||
2330 | static u64 | |
2331 | xscalepmu_raw_event(u64 config) | |
2332 | { | |
2333 | return config & 0xff; | |
2334 | } | |
2335 | ||
2336 | #define XSCALE1_OVERFLOWED_MASK 0x700 | |
2337 | #define XSCALE1_CCOUNT_OVERFLOW 0x400 | |
2338 | #define XSCALE1_COUNT0_OVERFLOW 0x100 | |
2339 | #define XSCALE1_COUNT1_OVERFLOW 0x200 | |
2340 | #define XSCALE1_CCOUNT_INT_EN 0x040 | |
2341 | #define XSCALE1_COUNT0_INT_EN 0x010 | |
2342 | #define XSCALE1_COUNT1_INT_EN 0x020 | |
2343 | #define XSCALE1_COUNT0_EVT_SHFT 12 | |
2344 | #define XSCALE1_COUNT0_EVT_MASK (0xff << XSCALE1_COUNT0_EVT_SHFT) | |
2345 | #define XSCALE1_COUNT1_EVT_SHFT 20 | |
2346 | #define XSCALE1_COUNT1_EVT_MASK (0xff << XSCALE1_COUNT1_EVT_SHFT) | |
2347 | ||
2348 | static inline u32 | |
2349 | xscale1pmu_read_pmnc(void) | |
2350 | { | |
2351 | u32 val; | |
2352 | asm volatile("mrc p14, 0, %0, c0, c0, 0" : "=r" (val)); | |
2353 | return val; | |
2354 | } | |
2355 | ||
2356 | static inline void | |
2357 | xscale1pmu_write_pmnc(u32 val) | |
2358 | { | |
2359 | /* upper 4bits and 7, 11 are write-as-0 */ | |
2360 | val &= 0xffff77f; | |
2361 | asm volatile("mcr p14, 0, %0, c0, c0, 0" : : "r" (val)); | |
2362 | } | |
2363 | ||
2364 | static inline int | |
2365 | xscale1_pmnc_counter_has_overflowed(unsigned long pmnc, | |
2366 | enum xscale_counters counter) | |
2367 | { | |
2368 | int ret = 0; | |
2369 | ||
2370 | switch (counter) { | |
2371 | case XSCALE_CYCLE_COUNTER: | |
2372 | ret = pmnc & XSCALE1_CCOUNT_OVERFLOW; | |
2373 | break; | |
2374 | case XSCALE_COUNTER0: | |
2375 | ret = pmnc & XSCALE1_COUNT0_OVERFLOW; | |
2376 | break; | |
2377 | case XSCALE_COUNTER1: | |
2378 | ret = pmnc & XSCALE1_COUNT1_OVERFLOW; | |
2379 | break; | |
2380 | default: | |
2381 | WARN_ONCE(1, "invalid counter number (%d)\n", counter); | |
2382 | } | |
2383 | ||
2384 | return ret; | |
2385 | } | |
2386 | ||
2387 | static irqreturn_t | |
2388 | xscale1pmu_handle_irq(int irq_num, void *dev) | |
2389 | { | |
2390 | unsigned long pmnc; | |
2391 | struct perf_sample_data data; | |
2392 | struct cpu_hw_events *cpuc; | |
2393 | struct pt_regs *regs; | |
2394 | int idx; | |
2395 | ||
2396 | /* | |
2397 | * NOTE: there's an A stepping erratum that states if an overflow | |
2398 | * bit already exists and another occurs, the previous | |
2399 | * Overflow bit gets cleared. There's no workaround. | |
2400 | * Fixed in B stepping or later. | |
2401 | */ | |
2402 | pmnc = xscale1pmu_read_pmnc(); | |
2403 | ||
2404 | /* | |
2405 | * Write the value back to clear the overflow flags. Overflow | |
2406 | * flags remain in pmnc for use below. We also disable the PMU | |
2407 | * while we process the interrupt. | |
2408 | */ | |
2409 | xscale1pmu_write_pmnc(pmnc & ~XSCALE_PMU_ENABLE); | |
2410 | ||
2411 | if (!(pmnc & XSCALE1_OVERFLOWED_MASK)) | |
2412 | return IRQ_NONE; | |
2413 | ||
2414 | regs = get_irq_regs(); | |
2415 | ||
2416 | perf_sample_data_init(&data, 0); | |
2417 | ||
2418 | cpuc = &__get_cpu_var(cpu_hw_events); | |
2419 | for (idx = 0; idx <= armpmu->num_events; ++idx) { | |
2420 | struct perf_event *event = cpuc->events[idx]; | |
2421 | struct hw_perf_event *hwc; | |
2422 | ||
2423 | if (!test_bit(idx, cpuc->active_mask)) | |
2424 | continue; | |
2425 | ||
2426 | if (!xscale1_pmnc_counter_has_overflowed(pmnc, idx)) | |
2427 | continue; | |
2428 | ||
2429 | hwc = &event->hw; | |
2430 | armpmu_event_update(event, hwc, idx); | |
2431 | data.period = event->hw.last_period; | |
2432 | if (!armpmu_event_set_period(event, hwc, idx)) | |
2433 | continue; | |
2434 | ||
2435 | if (perf_event_overflow(event, 0, &data, regs)) | |
2436 | armpmu->disable(hwc, idx); | |
2437 | } | |
2438 | ||
e360adbe | 2439 | irq_work_run(); |
49e6a32f WD |
2440 | |
2441 | /* | |
2442 | * Re-enable the PMU. | |
2443 | */ | |
2444 | pmnc = xscale1pmu_read_pmnc() | XSCALE_PMU_ENABLE; | |
2445 | xscale1pmu_write_pmnc(pmnc); | |
2446 | ||
2447 | return IRQ_HANDLED; | |
2448 | } | |
2449 | ||
2450 | static void | |
2451 | xscale1pmu_enable_event(struct hw_perf_event *hwc, int idx) | |
2452 | { | |
2453 | unsigned long val, mask, evt, flags; | |
2454 | ||
2455 | switch (idx) { | |
2456 | case XSCALE_CYCLE_COUNTER: | |
2457 | mask = 0; | |
2458 | evt = XSCALE1_CCOUNT_INT_EN; | |
2459 | break; | |
2460 | case XSCALE_COUNTER0: | |
2461 | mask = XSCALE1_COUNT0_EVT_MASK; | |
2462 | evt = (hwc->config_base << XSCALE1_COUNT0_EVT_SHFT) | | |
2463 | XSCALE1_COUNT0_INT_EN; | |
2464 | break; | |
2465 | case XSCALE_COUNTER1: | |
2466 | mask = XSCALE1_COUNT1_EVT_MASK; | |
2467 | evt = (hwc->config_base << XSCALE1_COUNT1_EVT_SHFT) | | |
2468 | XSCALE1_COUNT1_INT_EN; | |
2469 | break; | |
2470 | default: | |
2471 | WARN_ONCE(1, "invalid counter number (%d)\n", idx); | |
2472 | return; | |
2473 | } | |
2474 | ||
2475 | spin_lock_irqsave(&pmu_lock, flags); | |
2476 | val = xscale1pmu_read_pmnc(); | |
2477 | val &= ~mask; | |
2478 | val |= evt; | |
2479 | xscale1pmu_write_pmnc(val); | |
2480 | spin_unlock_irqrestore(&pmu_lock, flags); | |
2481 | } | |
2482 | ||
2483 | static void | |
2484 | xscale1pmu_disable_event(struct hw_perf_event *hwc, int idx) | |
2485 | { | |
2486 | unsigned long val, mask, evt, flags; | |
2487 | ||
2488 | switch (idx) { | |
2489 | case XSCALE_CYCLE_COUNTER: | |
2490 | mask = XSCALE1_CCOUNT_INT_EN; | |
2491 | evt = 0; | |
2492 | break; | |
2493 | case XSCALE_COUNTER0: | |
2494 | mask = XSCALE1_COUNT0_INT_EN | XSCALE1_COUNT0_EVT_MASK; | |
2495 | evt = XSCALE_PERFCTR_UNUSED << XSCALE1_COUNT0_EVT_SHFT; | |
2496 | break; | |
2497 | case XSCALE_COUNTER1: | |
2498 | mask = XSCALE1_COUNT1_INT_EN | XSCALE1_COUNT1_EVT_MASK; | |
2499 | evt = XSCALE_PERFCTR_UNUSED << XSCALE1_COUNT1_EVT_SHFT; | |
2500 | break; | |
2501 | default: | |
2502 | WARN_ONCE(1, "invalid counter number (%d)\n", idx); | |
2503 | return; | |
2504 | } | |
2505 | ||
2506 | spin_lock_irqsave(&pmu_lock, flags); | |
2507 | val = xscale1pmu_read_pmnc(); | |
2508 | val &= ~mask; | |
2509 | val |= evt; | |
2510 | xscale1pmu_write_pmnc(val); | |
2511 | spin_unlock_irqrestore(&pmu_lock, flags); | |
2512 | } | |
2513 | ||
2514 | static int | |
2515 | xscale1pmu_get_event_idx(struct cpu_hw_events *cpuc, | |
2516 | struct hw_perf_event *event) | |
2517 | { | |
2518 | if (XSCALE_PERFCTR_CCNT == event->config_base) { | |
2519 | if (test_and_set_bit(XSCALE_CYCLE_COUNTER, cpuc->used_mask)) | |
2520 | return -EAGAIN; | |
2521 | ||
2522 | return XSCALE_CYCLE_COUNTER; | |
2523 | } else { | |
2524 | if (!test_and_set_bit(XSCALE_COUNTER1, cpuc->used_mask)) { | |
2525 | return XSCALE_COUNTER1; | |
2526 | } | |
2527 | ||
2528 | if (!test_and_set_bit(XSCALE_COUNTER0, cpuc->used_mask)) { | |
2529 | return XSCALE_COUNTER0; | |
2530 | } | |
2531 | ||
2532 | return -EAGAIN; | |
2533 | } | |
2534 | } | |
2535 | ||
2536 | static void | |
2537 | xscale1pmu_start(void) | |
2538 | { | |
2539 | unsigned long flags, val; | |
2540 | ||
2541 | spin_lock_irqsave(&pmu_lock, flags); | |
2542 | val = xscale1pmu_read_pmnc(); | |
2543 | val |= XSCALE_PMU_ENABLE; | |
2544 | xscale1pmu_write_pmnc(val); | |
2545 | spin_unlock_irqrestore(&pmu_lock, flags); | |
2546 | } | |
2547 | ||
2548 | static void | |
2549 | xscale1pmu_stop(void) | |
2550 | { | |
2551 | unsigned long flags, val; | |
2552 | ||
2553 | spin_lock_irqsave(&pmu_lock, flags); | |
2554 | val = xscale1pmu_read_pmnc(); | |
2555 | val &= ~XSCALE_PMU_ENABLE; | |
2556 | xscale1pmu_write_pmnc(val); | |
2557 | spin_unlock_irqrestore(&pmu_lock, flags); | |
2558 | } | |
2559 | ||
2560 | static inline u32 | |
2561 | xscale1pmu_read_counter(int counter) | |
2562 | { | |
2563 | u32 val = 0; | |
2564 | ||
2565 | switch (counter) { | |
2566 | case XSCALE_CYCLE_COUNTER: | |
2567 | asm volatile("mrc p14, 0, %0, c1, c0, 0" : "=r" (val)); | |
2568 | break; | |
2569 | case XSCALE_COUNTER0: | |
2570 | asm volatile("mrc p14, 0, %0, c2, c0, 0" : "=r" (val)); | |
2571 | break; | |
2572 | case XSCALE_COUNTER1: | |
2573 | asm volatile("mrc p14, 0, %0, c3, c0, 0" : "=r" (val)); | |
2574 | break; | |
2575 | } | |
2576 | ||
2577 | return val; | |
2578 | } | |
2579 | ||
2580 | static inline void | |
2581 | xscale1pmu_write_counter(int counter, u32 val) | |
2582 | { | |
2583 | switch (counter) { | |
2584 | case XSCALE_CYCLE_COUNTER: | |
2585 | asm volatile("mcr p14, 0, %0, c1, c0, 0" : : "r" (val)); | |
2586 | break; | |
2587 | case XSCALE_COUNTER0: | |
2588 | asm volatile("mcr p14, 0, %0, c2, c0, 0" : : "r" (val)); | |
2589 | break; | |
2590 | case XSCALE_COUNTER1: | |
2591 | asm volatile("mcr p14, 0, %0, c3, c0, 0" : : "r" (val)); | |
2592 | break; | |
2593 | } | |
2594 | } | |
2595 | ||
2596 | static const struct arm_pmu xscale1pmu = { | |
2597 | .id = ARM_PERF_PMU_ID_XSCALE1, | |
2598 | .handle_irq = xscale1pmu_handle_irq, | |
2599 | .enable = xscale1pmu_enable_event, | |
2600 | .disable = xscale1pmu_disable_event, | |
2601 | .event_map = xscalepmu_event_map, | |
2602 | .raw_event = xscalepmu_raw_event, | |
2603 | .read_counter = xscale1pmu_read_counter, | |
2604 | .write_counter = xscale1pmu_write_counter, | |
2605 | .get_event_idx = xscale1pmu_get_event_idx, | |
2606 | .start = xscale1pmu_start, | |
2607 | .stop = xscale1pmu_stop, | |
2608 | .num_events = 3, | |
2609 | .max_period = (1LLU << 32) - 1, | |
2610 | }; | |
2611 | ||
2612 | #define XSCALE2_OVERFLOWED_MASK 0x01f | |
2613 | #define XSCALE2_CCOUNT_OVERFLOW 0x001 | |
2614 | #define XSCALE2_COUNT0_OVERFLOW 0x002 | |
2615 | #define XSCALE2_COUNT1_OVERFLOW 0x004 | |
2616 | #define XSCALE2_COUNT2_OVERFLOW 0x008 | |
2617 | #define XSCALE2_COUNT3_OVERFLOW 0x010 | |
2618 | #define XSCALE2_CCOUNT_INT_EN 0x001 | |
2619 | #define XSCALE2_COUNT0_INT_EN 0x002 | |
2620 | #define XSCALE2_COUNT1_INT_EN 0x004 | |
2621 | #define XSCALE2_COUNT2_INT_EN 0x008 | |
2622 | #define XSCALE2_COUNT3_INT_EN 0x010 | |
2623 | #define XSCALE2_COUNT0_EVT_SHFT 0 | |
2624 | #define XSCALE2_COUNT0_EVT_MASK (0xff << XSCALE2_COUNT0_EVT_SHFT) | |
2625 | #define XSCALE2_COUNT1_EVT_SHFT 8 | |
2626 | #define XSCALE2_COUNT1_EVT_MASK (0xff << XSCALE2_COUNT1_EVT_SHFT) | |
2627 | #define XSCALE2_COUNT2_EVT_SHFT 16 | |
2628 | #define XSCALE2_COUNT2_EVT_MASK (0xff << XSCALE2_COUNT2_EVT_SHFT) | |
2629 | #define XSCALE2_COUNT3_EVT_SHFT 24 | |
2630 | #define XSCALE2_COUNT3_EVT_MASK (0xff << XSCALE2_COUNT3_EVT_SHFT) | |
2631 | ||
2632 | static inline u32 | |
2633 | xscale2pmu_read_pmnc(void) | |
2634 | { | |
2635 | u32 val; | |
2636 | asm volatile("mrc p14, 0, %0, c0, c1, 0" : "=r" (val)); | |
2637 | /* bits 1-2 and 4-23 are read-unpredictable */ | |
2638 | return val & 0xff000009; | |
2639 | } | |
2640 | ||
2641 | static inline void | |
2642 | xscale2pmu_write_pmnc(u32 val) | |
2643 | { | |
2644 | /* bits 4-23 are write-as-0, 24-31 are write ignored */ | |
2645 | val &= 0xf; | |
2646 | asm volatile("mcr p14, 0, %0, c0, c1, 0" : : "r" (val)); | |
2647 | } | |
2648 | ||
2649 | static inline u32 | |
2650 | xscale2pmu_read_overflow_flags(void) | |
2651 | { | |
2652 | u32 val; | |
2653 | asm volatile("mrc p14, 0, %0, c5, c1, 0" : "=r" (val)); | |
2654 | return val; | |
2655 | } | |
2656 | ||
2657 | static inline void | |
2658 | xscale2pmu_write_overflow_flags(u32 val) | |
2659 | { | |
2660 | asm volatile("mcr p14, 0, %0, c5, c1, 0" : : "r" (val)); | |
2661 | } | |
2662 | ||
2663 | static inline u32 | |
2664 | xscale2pmu_read_event_select(void) | |
2665 | { | |
2666 | u32 val; | |
2667 | asm volatile("mrc p14, 0, %0, c8, c1, 0" : "=r" (val)); | |
2668 | return val; | |
2669 | } | |
2670 | ||
2671 | static inline void | |
2672 | xscale2pmu_write_event_select(u32 val) | |
2673 | { | |
2674 | asm volatile("mcr p14, 0, %0, c8, c1, 0" : : "r"(val)); | |
2675 | } | |
2676 | ||
2677 | static inline u32 | |
2678 | xscale2pmu_read_int_enable(void) | |
2679 | { | |
2680 | u32 val; | |
2681 | asm volatile("mrc p14, 0, %0, c4, c1, 0" : "=r" (val)); | |
2682 | return val; | |
2683 | } | |
2684 | ||
2685 | static void | |
2686 | xscale2pmu_write_int_enable(u32 val) | |
2687 | { | |
2688 | asm volatile("mcr p14, 0, %0, c4, c1, 0" : : "r" (val)); | |
2689 | } | |
2690 | ||
2691 | static inline int | |
2692 | xscale2_pmnc_counter_has_overflowed(unsigned long of_flags, | |
2693 | enum xscale_counters counter) | |
2694 | { | |
2695 | int ret = 0; | |
2696 | ||
2697 | switch (counter) { | |
2698 | case XSCALE_CYCLE_COUNTER: | |
2699 | ret = of_flags & XSCALE2_CCOUNT_OVERFLOW; | |
2700 | break; | |
2701 | case XSCALE_COUNTER0: | |
2702 | ret = of_flags & XSCALE2_COUNT0_OVERFLOW; | |
2703 | break; | |
2704 | case XSCALE_COUNTER1: | |
2705 | ret = of_flags & XSCALE2_COUNT1_OVERFLOW; | |
2706 | break; | |
2707 | case XSCALE_COUNTER2: | |
2708 | ret = of_flags & XSCALE2_COUNT2_OVERFLOW; | |
2709 | break; | |
2710 | case XSCALE_COUNTER3: | |
2711 | ret = of_flags & XSCALE2_COUNT3_OVERFLOW; | |
2712 | break; | |
2713 | default: | |
2714 | WARN_ONCE(1, "invalid counter number (%d)\n", counter); | |
2715 | } | |
2716 | ||
2717 | return ret; | |
2718 | } | |
2719 | ||
2720 | static irqreturn_t | |
2721 | xscale2pmu_handle_irq(int irq_num, void *dev) | |
2722 | { | |
2723 | unsigned long pmnc, of_flags; | |
2724 | struct perf_sample_data data; | |
2725 | struct cpu_hw_events *cpuc; | |
2726 | struct pt_regs *regs; | |
2727 | int idx; | |
2728 | ||
2729 | /* Disable the PMU. */ | |
2730 | pmnc = xscale2pmu_read_pmnc(); | |
2731 | xscale2pmu_write_pmnc(pmnc & ~XSCALE_PMU_ENABLE); | |
2732 | ||
2733 | /* Check the overflow flag register. */ | |
2734 | of_flags = xscale2pmu_read_overflow_flags(); | |
2735 | if (!(of_flags & XSCALE2_OVERFLOWED_MASK)) | |
2736 | return IRQ_NONE; | |
2737 | ||
2738 | /* Clear the overflow bits. */ | |
2739 | xscale2pmu_write_overflow_flags(of_flags); | |
2740 | ||
2741 | regs = get_irq_regs(); | |
2742 | ||
2743 | perf_sample_data_init(&data, 0); | |
2744 | ||
2745 | cpuc = &__get_cpu_var(cpu_hw_events); | |
2746 | for (idx = 0; idx <= armpmu->num_events; ++idx) { | |
2747 | struct perf_event *event = cpuc->events[idx]; | |
2748 | struct hw_perf_event *hwc; | |
2749 | ||
2750 | if (!test_bit(idx, cpuc->active_mask)) | |
2751 | continue; | |
2752 | ||
2753 | if (!xscale2_pmnc_counter_has_overflowed(pmnc, idx)) | |
2754 | continue; | |
2755 | ||
2756 | hwc = &event->hw; | |
2757 | armpmu_event_update(event, hwc, idx); | |
2758 | data.period = event->hw.last_period; | |
2759 | if (!armpmu_event_set_period(event, hwc, idx)) | |
2760 | continue; | |
2761 | ||
2762 | if (perf_event_overflow(event, 0, &data, regs)) | |
2763 | armpmu->disable(hwc, idx); | |
2764 | } | |
2765 | ||
e360adbe | 2766 | irq_work_run(); |
49e6a32f WD |
2767 | |
2768 | /* | |
2769 | * Re-enable the PMU. | |
2770 | */ | |
2771 | pmnc = xscale2pmu_read_pmnc() | XSCALE_PMU_ENABLE; | |
2772 | xscale2pmu_write_pmnc(pmnc); | |
2773 | ||
2774 | return IRQ_HANDLED; | |
2775 | } | |
2776 | ||
2777 | static void | |
2778 | xscale2pmu_enable_event(struct hw_perf_event *hwc, int idx) | |
2779 | { | |
2780 | unsigned long flags, ien, evtsel; | |
2781 | ||
2782 | ien = xscale2pmu_read_int_enable(); | |
2783 | evtsel = xscale2pmu_read_event_select(); | |
2784 | ||
2785 | switch (idx) { | |
2786 | case XSCALE_CYCLE_COUNTER: | |
2787 | ien |= XSCALE2_CCOUNT_INT_EN; | |
2788 | break; | |
2789 | case XSCALE_COUNTER0: | |
2790 | ien |= XSCALE2_COUNT0_INT_EN; | |
2791 | evtsel &= ~XSCALE2_COUNT0_EVT_MASK; | |
2792 | evtsel |= hwc->config_base << XSCALE2_COUNT0_EVT_SHFT; | |
2793 | break; | |
2794 | case XSCALE_COUNTER1: | |
2795 | ien |= XSCALE2_COUNT1_INT_EN; | |
2796 | evtsel &= ~XSCALE2_COUNT1_EVT_MASK; | |
2797 | evtsel |= hwc->config_base << XSCALE2_COUNT1_EVT_SHFT; | |
2798 | break; | |
2799 | case XSCALE_COUNTER2: | |
2800 | ien |= XSCALE2_COUNT2_INT_EN; | |
2801 | evtsel &= ~XSCALE2_COUNT2_EVT_MASK; | |
2802 | evtsel |= hwc->config_base << XSCALE2_COUNT2_EVT_SHFT; | |
2803 | break; | |
2804 | case XSCALE_COUNTER3: | |
2805 | ien |= XSCALE2_COUNT3_INT_EN; | |
2806 | evtsel &= ~XSCALE2_COUNT3_EVT_MASK; | |
2807 | evtsel |= hwc->config_base << XSCALE2_COUNT3_EVT_SHFT; | |
2808 | break; | |
2809 | default: | |
2810 | WARN_ONCE(1, "invalid counter number (%d)\n", idx); | |
2811 | return; | |
2812 | } | |
2813 | ||
2814 | spin_lock_irqsave(&pmu_lock, flags); | |
2815 | xscale2pmu_write_event_select(evtsel); | |
2816 | xscale2pmu_write_int_enable(ien); | |
2817 | spin_unlock_irqrestore(&pmu_lock, flags); | |
2818 | } | |
2819 | ||
2820 | static void | |
2821 | xscale2pmu_disable_event(struct hw_perf_event *hwc, int idx) | |
2822 | { | |
2823 | unsigned long flags, ien, evtsel; | |
2824 | ||
2825 | ien = xscale2pmu_read_int_enable(); | |
2826 | evtsel = xscale2pmu_read_event_select(); | |
2827 | ||
2828 | switch (idx) { | |
2829 | case XSCALE_CYCLE_COUNTER: | |
2830 | ien &= ~XSCALE2_CCOUNT_INT_EN; | |
2831 | break; | |
2832 | case XSCALE_COUNTER0: | |
2833 | ien &= ~XSCALE2_COUNT0_INT_EN; | |
2834 | evtsel &= ~XSCALE2_COUNT0_EVT_MASK; | |
2835 | evtsel |= XSCALE_PERFCTR_UNUSED << XSCALE2_COUNT0_EVT_SHFT; | |
2836 | break; | |
2837 | case XSCALE_COUNTER1: | |
2838 | ien &= ~XSCALE2_COUNT1_INT_EN; | |
2839 | evtsel &= ~XSCALE2_COUNT1_EVT_MASK; | |
2840 | evtsel |= XSCALE_PERFCTR_UNUSED << XSCALE2_COUNT1_EVT_SHFT; | |
2841 | break; | |
2842 | case XSCALE_COUNTER2: | |
2843 | ien &= ~XSCALE2_COUNT2_INT_EN; | |
2844 | evtsel &= ~XSCALE2_COUNT2_EVT_MASK; | |
2845 | evtsel |= XSCALE_PERFCTR_UNUSED << XSCALE2_COUNT2_EVT_SHFT; | |
2846 | break; | |
2847 | case XSCALE_COUNTER3: | |
2848 | ien &= ~XSCALE2_COUNT3_INT_EN; | |
2849 | evtsel &= ~XSCALE2_COUNT3_EVT_MASK; | |
2850 | evtsel |= XSCALE_PERFCTR_UNUSED << XSCALE2_COUNT3_EVT_SHFT; | |
2851 | break; | |
2852 | default: | |
2853 | WARN_ONCE(1, "invalid counter number (%d)\n", idx); | |
2854 | return; | |
2855 | } | |
2856 | ||
2857 | spin_lock_irqsave(&pmu_lock, flags); | |
2858 | xscale2pmu_write_event_select(evtsel); | |
2859 | xscale2pmu_write_int_enable(ien); | |
2860 | spin_unlock_irqrestore(&pmu_lock, flags); | |
2861 | } | |
2862 | ||
2863 | static int | |
2864 | xscale2pmu_get_event_idx(struct cpu_hw_events *cpuc, | |
2865 | struct hw_perf_event *event) | |
2866 | { | |
2867 | int idx = xscale1pmu_get_event_idx(cpuc, event); | |
2868 | if (idx >= 0) | |
2869 | goto out; | |
2870 | ||
2871 | if (!test_and_set_bit(XSCALE_COUNTER3, cpuc->used_mask)) | |
2872 | idx = XSCALE_COUNTER3; | |
2873 | else if (!test_and_set_bit(XSCALE_COUNTER2, cpuc->used_mask)) | |
2874 | idx = XSCALE_COUNTER2; | |
2875 | out: | |
2876 | return idx; | |
2877 | } | |
2878 | ||
2879 | static void | |
2880 | xscale2pmu_start(void) | |
2881 | { | |
2882 | unsigned long flags, val; | |
2883 | ||
2884 | spin_lock_irqsave(&pmu_lock, flags); | |
2885 | val = xscale2pmu_read_pmnc() & ~XSCALE_PMU_CNT64; | |
2886 | val |= XSCALE_PMU_ENABLE; | |
2887 | xscale2pmu_write_pmnc(val); | |
2888 | spin_unlock_irqrestore(&pmu_lock, flags); | |
2889 | } | |
2890 | ||
2891 | static void | |
2892 | xscale2pmu_stop(void) | |
2893 | { | |
2894 | unsigned long flags, val; | |
2895 | ||
2896 | spin_lock_irqsave(&pmu_lock, flags); | |
2897 | val = xscale2pmu_read_pmnc(); | |
2898 | val &= ~XSCALE_PMU_ENABLE; | |
2899 | xscale2pmu_write_pmnc(val); | |
2900 | spin_unlock_irqrestore(&pmu_lock, flags); | |
2901 | } | |
2902 | ||
2903 | static inline u32 | |
2904 | xscale2pmu_read_counter(int counter) | |
2905 | { | |
2906 | u32 val = 0; | |
2907 | ||
2908 | switch (counter) { | |
2909 | case XSCALE_CYCLE_COUNTER: | |
2910 | asm volatile("mrc p14, 0, %0, c1, c1, 0" : "=r" (val)); | |
2911 | break; | |
2912 | case XSCALE_COUNTER0: | |
2913 | asm volatile("mrc p14, 0, %0, c0, c2, 0" : "=r" (val)); | |
2914 | break; | |
2915 | case XSCALE_COUNTER1: | |
2916 | asm volatile("mrc p14, 0, %0, c1, c2, 0" : "=r" (val)); | |
2917 | break; | |
2918 | case XSCALE_COUNTER2: | |
2919 | asm volatile("mrc p14, 0, %0, c2, c2, 0" : "=r" (val)); | |
2920 | break; | |
2921 | case XSCALE_COUNTER3: | |
2922 | asm volatile("mrc p14, 0, %0, c3, c2, 0" : "=r" (val)); | |
2923 | break; | |
2924 | } | |
2925 | ||
2926 | return val; | |
2927 | } | |
2928 | ||
2929 | static inline void | |
2930 | xscale2pmu_write_counter(int counter, u32 val) | |
2931 | { | |
2932 | switch (counter) { | |
2933 | case XSCALE_CYCLE_COUNTER: | |
2934 | asm volatile("mcr p14, 0, %0, c1, c1, 0" : : "r" (val)); | |
2935 | break; | |
2936 | case XSCALE_COUNTER0: | |
2937 | asm volatile("mcr p14, 0, %0, c0, c2, 0" : : "r" (val)); | |
2938 | break; | |
2939 | case XSCALE_COUNTER1: | |
2940 | asm volatile("mcr p14, 0, %0, c1, c2, 0" : : "r" (val)); | |
2941 | break; | |
2942 | case XSCALE_COUNTER2: | |
2943 | asm volatile("mcr p14, 0, %0, c2, c2, 0" : : "r" (val)); | |
2944 | break; | |
2945 | case XSCALE_COUNTER3: | |
2946 | asm volatile("mcr p14, 0, %0, c3, c2, 0" : : "r" (val)); | |
2947 | break; | |
2948 | } | |
2949 | } | |
2950 | ||
2951 | static const struct arm_pmu xscale2pmu = { | |
2952 | .id = ARM_PERF_PMU_ID_XSCALE2, | |
2953 | .handle_irq = xscale2pmu_handle_irq, | |
2954 | .enable = xscale2pmu_enable_event, | |
2955 | .disable = xscale2pmu_disable_event, | |
2956 | .event_map = xscalepmu_event_map, | |
2957 | .raw_event = xscalepmu_raw_event, | |
2958 | .read_counter = xscale2pmu_read_counter, | |
2959 | .write_counter = xscale2pmu_write_counter, | |
2960 | .get_event_idx = xscale2pmu_get_event_idx, | |
2961 | .start = xscale2pmu_start, | |
2962 | .stop = xscale2pmu_stop, | |
2963 | .num_events = 5, | |
2964 | .max_period = (1LLU << 32) - 1, | |
2965 | }; | |
2966 | ||
1b8873a0 JI |
2967 | static int __init |
2968 | init_hw_perf_events(void) | |
2969 | { | |
2970 | unsigned long cpuid = read_cpuid_id(); | |
2971 | unsigned long implementor = (cpuid & 0xFF000000) >> 24; | |
2972 | unsigned long part_number = (cpuid & 0xFFF0); | |
2973 | ||
49e6a32f | 2974 | /* ARM Ltd CPUs. */ |
1b8873a0 JI |
2975 | if (0x41 == implementor) { |
2976 | switch (part_number) { | |
2977 | case 0xB360: /* ARM1136 */ | |
2978 | case 0xB560: /* ARM1156 */ | |
2979 | case 0xB760: /* ARM1176 */ | |
2980 | armpmu = &armv6pmu; | |
2981 | memcpy(armpmu_perf_cache_map, armv6_perf_cache_map, | |
2982 | sizeof(armv6_perf_cache_map)); | |
1b8873a0 JI |
2983 | break; |
2984 | case 0xB020: /* ARM11mpcore */ | |
2985 | armpmu = &armv6mpcore_pmu; | |
2986 | memcpy(armpmu_perf_cache_map, | |
2987 | armv6mpcore_perf_cache_map, | |
2988 | sizeof(armv6mpcore_perf_cache_map)); | |
1b8873a0 | 2989 | break; |
796d1295 | 2990 | case 0xC080: /* Cortex-A8 */ |
181193f3 | 2991 | armv7pmu.id = ARM_PERF_PMU_ID_CA8; |
796d1295 JP |
2992 | memcpy(armpmu_perf_cache_map, armv7_a8_perf_cache_map, |
2993 | sizeof(armv7_a8_perf_cache_map)); | |
2994 | armv7pmu.event_map = armv7_a8_pmu_event_map; | |
2995 | armpmu = &armv7pmu; | |
2996 | ||
2997 | /* Reset PMNC and read the nb of CNTx counters | |
2998 | supported */ | |
2999 | armv7pmu.num_events = armv7_reset_read_pmnc(); | |
796d1295 JP |
3000 | break; |
3001 | case 0xC090: /* Cortex-A9 */ | |
181193f3 | 3002 | armv7pmu.id = ARM_PERF_PMU_ID_CA9; |
796d1295 JP |
3003 | memcpy(armpmu_perf_cache_map, armv7_a9_perf_cache_map, |
3004 | sizeof(armv7_a9_perf_cache_map)); | |
3005 | armv7pmu.event_map = armv7_a9_pmu_event_map; | |
3006 | armpmu = &armv7pmu; | |
3007 | ||
3008 | /* Reset PMNC and read the nb of CNTx counters | |
3009 | supported */ | |
3010 | armv7pmu.num_events = armv7_reset_read_pmnc(); | |
796d1295 | 3011 | break; |
49e6a32f WD |
3012 | } |
3013 | /* Intel CPUs [xscale]. */ | |
3014 | } else if (0x69 == implementor) { | |
3015 | part_number = (cpuid >> 13) & 0x7; | |
3016 | switch (part_number) { | |
3017 | case 1: | |
3018 | armpmu = &xscale1pmu; | |
3019 | memcpy(armpmu_perf_cache_map, xscale_perf_cache_map, | |
3020 | sizeof(xscale_perf_cache_map)); | |
49e6a32f WD |
3021 | break; |
3022 | case 2: | |
3023 | armpmu = &xscale2pmu; | |
3024 | memcpy(armpmu_perf_cache_map, xscale_perf_cache_map, | |
3025 | sizeof(xscale_perf_cache_map)); | |
49e6a32f | 3026 | break; |
1b8873a0 JI |
3027 | } |
3028 | } | |
3029 | ||
49e6a32f | 3030 | if (armpmu) { |
796d1295 | 3031 | pr_info("enabled with %s PMU driver, %d counters available\n", |
49e6a32f WD |
3032 | arm_pmu_names[armpmu->id], armpmu->num_events); |
3033 | } else { | |
3034 | pr_info("no hardware support available\n"); | |
49e6a32f | 3035 | } |
1b8873a0 | 3036 | |
b0a873eb PZ |
3037 | perf_pmu_register(&pmu); |
3038 | ||
1b8873a0 JI |
3039 | return 0; |
3040 | } | |
3041 | arch_initcall(init_hw_perf_events); | |
3042 | ||
3043 | /* | |
3044 | * Callchain handling code. | |
3045 | */ | |
1b8873a0 JI |
3046 | |
3047 | /* | |
3048 | * The registers we're interested in are at the end of the variable | |
3049 | * length saved register structure. The fp points at the end of this | |
3050 | * structure so the address of this struct is: | |
3051 | * (struct frame_tail *)(xxx->fp)-1 | |
3052 | * | |
3053 | * This code has been adapted from the ARM OProfile support. | |
3054 | */ | |
3055 | struct frame_tail { | |
3056 | struct frame_tail *fp; | |
3057 | unsigned long sp; | |
3058 | unsigned long lr; | |
3059 | } __attribute__((packed)); | |
3060 | ||
3061 | /* | |
3062 | * Get the return address for a single stackframe and return a pointer to the | |
3063 | * next frame tail. | |
3064 | */ | |
3065 | static struct frame_tail * | |
3066 | user_backtrace(struct frame_tail *tail, | |
3067 | struct perf_callchain_entry *entry) | |
3068 | { | |
3069 | struct frame_tail buftail; | |
3070 | ||
3071 | /* Also check accessibility of one struct frame_tail beyond */ | |
3072 | if (!access_ok(VERIFY_READ, tail, sizeof(buftail))) | |
3073 | return NULL; | |
3074 | if (__copy_from_user_inatomic(&buftail, tail, sizeof(buftail))) | |
3075 | return NULL; | |
3076 | ||
70791ce9 | 3077 | perf_callchain_store(entry, buftail.lr); |
1b8873a0 JI |
3078 | |
3079 | /* | |
3080 | * Frame pointers should strictly progress back up the stack | |
3081 | * (towards higher addresses). | |
3082 | */ | |
3083 | if (tail >= buftail.fp) | |
3084 | return NULL; | |
3085 | ||
3086 | return buftail.fp - 1; | |
3087 | } | |
3088 | ||
56962b44 FW |
3089 | void |
3090 | perf_callchain_user(struct perf_callchain_entry *entry, struct pt_regs *regs) | |
1b8873a0 JI |
3091 | { |
3092 | struct frame_tail *tail; | |
3093 | ||
1b8873a0 JI |
3094 | |
3095 | tail = (struct frame_tail *)regs->ARM_fp - 1; | |
3096 | ||
3097 | while (tail && !((unsigned long)tail & 0x3)) | |
3098 | tail = user_backtrace(tail, entry); | |
3099 | } | |
3100 | ||
3101 | /* | |
3102 | * Gets called by walk_stackframe() for every stackframe. This will be called | |
3103 | * whist unwinding the stackframe and is like a subroutine return so we use | |
3104 | * the PC. | |
3105 | */ | |
3106 | static int | |
3107 | callchain_trace(struct stackframe *fr, | |
3108 | void *data) | |
3109 | { | |
3110 | struct perf_callchain_entry *entry = data; | |
70791ce9 | 3111 | perf_callchain_store(entry, fr->pc); |
1b8873a0 JI |
3112 | return 0; |
3113 | } | |
3114 | ||
56962b44 FW |
3115 | void |
3116 | perf_callchain_kernel(struct perf_callchain_entry *entry, struct pt_regs *regs) | |
1b8873a0 JI |
3117 | { |
3118 | struct stackframe fr; | |
3119 | ||
1b8873a0 JI |
3120 | fr.fp = regs->ARM_fp; |
3121 | fr.sp = regs->ARM_sp; | |
3122 | fr.lr = regs->ARM_lr; | |
3123 | fr.pc = regs->ARM_pc; | |
3124 | walk_stackframe(&fr, callchain_trace, entry); | |
3125 | } |