From 9d94674ab754be0e275120a183670ead435f9c0d Mon Sep 17 00:00:00 2001 From: "Luis R. Rodriguez" Date: Tue, 26 Oct 2010 15:27:23 -0700 Subject: [PATCH] ath9k: simplify hw reset locking The new PCU lock is better placed so we can just contend against that when trying to reset hardware. This is part of a series of patches which fix stopping TX DMA completley when requested on the driver. For more details about this issue refer to this thread: http://marc.info/?l=linux-wireless&m=128629803703756&w=2 Tested-by: Ben Greear Cc: Kyungwan Nam Cc: stable@kernel.org Signed-off-by: Luis R. Rodriguez Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/ath9k.h | 1 - drivers/net/wireless/ath/ath9k/init.c | 1 - drivers/net/wireless/ath/ath9k/main.c | 22 ++++++---------------- drivers/net/wireless/ath/ath9k/xmit.c | 4 ++-- 4 files changed, 8 insertions(+), 20 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h index 81fed83add7..cb9194a5b56 100644 --- a/drivers/net/wireless/ath/ath9k/ath9k.h +++ b/drivers/net/wireless/ath/ath9k/ath9k.h @@ -599,7 +599,6 @@ struct ath_softc { struct ath_hw *sc_ah; void __iomem *mem; int irq; - spinlock_t sc_resetlock; spinlock_t sc_serial_rw; spinlock_t sc_pm_lock; struct mutex mutex; diff --git a/drivers/net/wireless/ath/ath9k/init.c b/drivers/net/wireless/ath/ath9k/init.c index 1b72720b36e..adff0da01f4 100644 --- a/drivers/net/wireless/ath/ath9k/init.c +++ b/drivers/net/wireless/ath/ath9k/init.c @@ -580,7 +580,6 @@ static int ath9k_init_softc(u16 devid, struct ath_softc *sc, u16 subsysid, spin_lock_init(&common->cc_lock); spin_lock_init(&sc->wiphy_lock); - spin_lock_init(&sc->sc_resetlock); spin_lock_init(&sc->sc_serial_rw); spin_lock_init(&sc->sc_pm_lock); mutex_init(&sc->mutex); diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c index 92ed5bb7119..341d587b686 100644 --- a/drivers/net/wireless/ath/ath9k/main.c +++ b/drivers/net/wireless/ath/ath9k/main.c @@ -262,19 +262,15 @@ int ath_set_channel(struct ath_softc *sc, struct ieee80211_hw *hw, channel->center_freq, conf_is_ht40(conf), fastcc); - spin_lock_bh(&sc->sc_resetlock); - r = ath9k_hw_reset(ah, hchan, caldata, fastcc); if (r) { ath_print(common, ATH_DBG_FATAL, "Unable to reset channel (%u MHz), " "reset status %d\n", channel->center_freq, r); - spin_unlock_bh(&sc->sc_resetlock); spin_unlock_bh(&sc->rx.pcu_lock); goto ps_restore; } - spin_unlock_bh(&sc->sc_resetlock); if (ath_startrecv(sc) != 0) { ath_print(common, ATH_DBG_FATAL, @@ -886,7 +882,6 @@ void ath_radio_enable(struct ath_softc *sc, struct ieee80211_hw *hw) ah->curchan = ath_get_curchannel(sc, sc->hw); spin_lock_bh(&sc->rx.pcu_lock); - spin_lock_bh(&sc->sc_resetlock); r = ath9k_hw_reset(ah, ah->curchan, ah->caldata, false); if (r) { ath_print(common, ATH_DBG_FATAL, @@ -894,7 +889,6 @@ void ath_radio_enable(struct ath_softc *sc, struct ieee80211_hw *hw) "reset status %d\n", channel->center_freq, r); } - spin_unlock_bh(&sc->sc_resetlock); ath_update_txpow(sc); if (ath_startrecv(sc) != 0) { @@ -951,7 +945,6 @@ void ath_radio_disable(struct ath_softc *sc, struct ieee80211_hw *hw) if (!ah->curchan) ah->curchan = ath_get_curchannel(sc, hw); - spin_lock_bh(&sc->sc_resetlock); r = ath9k_hw_reset(ah, ah->curchan, ah->caldata, false); if (r) { ath_print(ath9k_hw_common(sc->sc_ah), ATH_DBG_FATAL, @@ -959,7 +952,6 @@ void ath_radio_disable(struct ath_softc *sc, struct ieee80211_hw *hw) "reset status %d\n", channel->center_freq, r); } - spin_unlock_bh(&sc->sc_resetlock); ath9k_hw_phy_disable(ah); @@ -990,12 +982,10 @@ int ath_reset(struct ath_softc *sc, bool retry_tx) ath_stoprecv(sc); ath_flushrecv(sc); - spin_lock_bh(&sc->sc_resetlock); r = ath9k_hw_reset(ah, sc->sc_ah->curchan, ah->caldata, false); if (r) ath_print(common, ATH_DBG_FATAL, "Unable to reset hardware; reset status %d\n", r); - spin_unlock_bh(&sc->sc_resetlock); if (ath_startrecv(sc) != 0) ath_print(common, ATH_DBG_FATAL, @@ -1166,18 +1156,15 @@ static int ath9k_start(struct ieee80211_hw *hw) * and then setup of the interrupt mask. */ spin_lock_bh(&sc->rx.pcu_lock); - spin_lock_bh(&sc->sc_resetlock); r = ath9k_hw_reset(ah, init_channel, ah->caldata, false); if (r) { ath_print(common, ATH_DBG_FATAL, "Unable to reset hardware; reset status %d " "(freq %u MHz)\n", r, curchan->center_freq); - spin_unlock_bh(&sc->sc_resetlock); spin_unlock_bh(&sc->rx.pcu_lock); goto mutex_unlock; } - spin_unlock_bh(&sc->sc_resetlock); /* * This is needed only to setup initial state @@ -1398,14 +1385,17 @@ static void ath9k_stop(struct ieee80211_hw *hw) * before setting the invalid flag. */ ath9k_hw_disable_interrupts(ah); - spin_lock_bh(&sc->rx.pcu_lock); if (!(sc->sc_flags & SC_OP_INVALID)) { ath_drain_all_txq(sc, false); + spin_lock_bh(&sc->rx.pcu_lock); ath_stoprecv(sc); ath9k_hw_phy_disable(ah); - } else + spin_unlock_bh(&sc->rx.pcu_lock); + } else { + spin_lock_bh(&sc->rx.pcu_lock); sc->rx.rxlink = NULL; - spin_unlock_bh(&sc->rx.pcu_lock); + spin_unlock_bh(&sc->rx.pcu_lock); + } /* disable HAL and put h/w to sleep */ ath9k_hw_disable(ah); diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c index f2ade2402ce..e662ecade39 100644 --- a/drivers/net/wireless/ath/ath9k/xmit.c +++ b/drivers/net/wireless/ath/ath9k/xmit.c @@ -1148,13 +1148,13 @@ void ath_drain_all_txq(struct ath_softc *sc, bool retry_tx) ath_print(common, ATH_DBG_FATAL, "Failed to stop TX DMA. Resetting hardware!\n"); - spin_lock_bh(&sc->sc_resetlock); + spin_lock_bh(&sc->rx.pcu_lock); r = ath9k_hw_reset(ah, sc->sc_ah->curchan, ah->caldata, false); if (r) ath_print(common, ATH_DBG_FATAL, "Unable to reset hardware; reset status %d\n", r); - spin_unlock_bh(&sc->sc_resetlock); + spin_unlock_bh(&sc->rx.pcu_lock); } for (i = 0; i < ATH9K_NUM_TX_QUEUES; i++) { -- 2.39.3