From b6e37e55c250f5233401b2566b1a4b512a98bc7b Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Fri, 14 Jul 2006 12:15:40 +0100 Subject: [PATCH] [PATCH] Cleanup SLHC configuration Convert selection of serial line header compression to use CONFIG_SLHC rather than makefile ifeq uglyness. This makes it easier to select the SLHC module from other code. Signed-off-by: Ralf Baechle Signed-off-by: Jeff Garzik --- drivers/isdn/i4l/Kconfig | 1 + drivers/net/Kconfig | 8 ++++++++ drivers/net/Makefile | 10 ++-------- 3 files changed, 11 insertions(+), 8 deletions(-) diff --git a/drivers/isdn/i4l/Kconfig b/drivers/isdn/i4l/Kconfig index a4f7288a1fc..3ef567b99c7 100644 --- a/drivers/isdn/i4l/Kconfig +++ b/drivers/isdn/i4l/Kconfig @@ -5,6 +5,7 @@ config ISDN_PPP bool "Support synchronous PPP" depends on INET + select SLHC help Over digital connections such as ISDN, there is no need to synchronize sender and recipient's clocks with start and stop bits diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 39189903e35..7c826db8460 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -2509,6 +2509,7 @@ config PLIP config PPP tristate "PPP (point-to-point protocol) support" + select SLHC ---help--- PPP (Point to Point Protocol) is a newer and better SLIP. It serves the same purpose: sending Internet traffic over telephone (and other @@ -2689,6 +2690,7 @@ config SLIP config SLIP_COMPRESSED bool "CSLIP compressed headers" depends on SLIP + select SLHC ---help--- This protocol is faster than SLIP because it uses compression on the TCP/IP headers (not on the data itself), but it has to be supported @@ -2701,6 +2703,12 @@ config SLIP_COMPRESSED , explains how to configure CSLIP. This won't enlarge your kernel. +config SLHC + tristate + help + This option enables Van Jacobsen serial line header compression + routines. + config SLIP_SMART bool "Keepalive and linefill" depends on SLIP diff --git a/drivers/net/Makefile b/drivers/net/Makefile index c91e95126f7..038a8e02f64 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -2,10 +2,6 @@ # Makefile for the Linux network (ethercard) device drivers. # -ifeq ($(CONFIG_ISDN_PPP),y) - obj-$(CONFIG_ISDN) += slhc.o -endif - obj-$(CONFIG_E1000) += e1000/ obj-$(CONFIG_IBM_EMAC) += ibm_emac/ obj-$(CONFIG_IXGB) += ixgb/ @@ -111,7 +107,7 @@ obj-$(CONFIG_NE_H8300) += ne-h8300.o 8390.o obj-$(CONFIG_MV643XX_ETH) += mv643xx_eth.o -obj-$(CONFIG_PPP) += ppp_generic.o slhc.o +obj-$(CONFIG_PPP) += ppp_generic.o obj-$(CONFIG_PPP_ASYNC) += ppp_async.o obj-$(CONFIG_PPP_SYNC_TTY) += ppp_synctty.o obj-$(CONFIG_PPP_DEFLATE) += ppp_deflate.o @@ -120,9 +116,7 @@ obj-$(CONFIG_PPP_MPPE) += ppp_mppe.o obj-$(CONFIG_PPPOE) += pppox.o pppoe.o obj-$(CONFIG_SLIP) += slip.o -ifeq ($(CONFIG_SLIP_COMPRESSED),y) - obj-$(CONFIG_SLIP) += slhc.o -endif +obj-$(CONFIG_SLHC) += slhc.o obj-$(CONFIG_DUMMY) += dummy.o obj-$(CONFIG_IFB) += ifb.o -- 2.39.3