From: Manuel Lauss Date: Mon, 2 Nov 2009 20:21:43 +0000 (+0100) Subject: MIPS: Alchemy: Extended DB1200 board support. X-Git-Tag: v2.6.34-rc1~269^2~117 X-Git-Url: https://bbs.cooldavid.org/git/?a=commitdiff_plain;h=63323ec54a7e922a232c82070727e44eb1a5b43c;p=net-next-2.6.git MIPS: Alchemy: Extended DB1200 board support. Create own directory for DB1200 code and update it with new features. - SPI support: - tmp121 temperature sensor - SPI flash on DB1200 - I2C support - NE1619 sensor - AT24 eeprom - I2C/SPI can be selected at boot time via switch S6.8 - Carddetect IRQs for SD cards. - gen_nand based NAND support. - hexleds count sleep/wake transitions. Signed-off-by: Manuel Lauss Cc: Linux-MIPS Signed-off-by: Ralf Baechle --- diff --git a/arch/mips/alchemy/common/reset.c b/arch/mips/alchemy/common/reset.c index 4791011e8f9..266afd48c19 100644 --- a/arch/mips/alchemy/common/reset.c +++ b/arch/mips/alchemy/common/reset.c @@ -164,9 +164,6 @@ void au1000_halt(void) #ifdef CONFIG_MIPS_MIRAGE gpio_direction_output(210, 1); #endif -#ifdef CONFIG_MIPS_DB1200 - au_writew(au_readw(0xB980001C) | (1 << 14), 0xB980001C); -#endif #ifdef CONFIG_PM au_sleep(); diff --git a/arch/mips/alchemy/devboards/Makefile b/arch/mips/alchemy/devboards/Makefile index c74ef80b92f..ecbd37f9ee8 100644 --- a/arch/mips/alchemy/devboards/Makefile +++ b/arch/mips/alchemy/devboards/Makefile @@ -11,7 +11,7 @@ obj-$(CONFIG_MIPS_PB1500) += pb1500/ obj-$(CONFIG_MIPS_PB1550) += pb1550/ obj-$(CONFIG_MIPS_DB1000) += db1x00/ obj-$(CONFIG_MIPS_DB1100) += db1x00/ -obj-$(CONFIG_MIPS_DB1200) += pb1200/ +obj-$(CONFIG_MIPS_DB1200) += db1200/ obj-$(CONFIG_MIPS_DB1500) += db1x00/ obj-$(CONFIG_MIPS_DB1550) += db1x00/ obj-$(CONFIG_MIPS_BOSPORUS) += db1x00/ diff --git a/arch/mips/alchemy/devboards/db1200/Makefile b/arch/mips/alchemy/devboards/db1200/Makefile new file mode 100644 index 00000000000..17840a5e273 --- /dev/null +++ b/arch/mips/alchemy/devboards/db1200/Makefile @@ -0,0 +1 @@ +obj-y += setup.o platform.o diff --git a/arch/mips/alchemy/devboards/db1200/platform.c b/arch/mips/alchemy/devboards/db1200/platform.c new file mode 100644 index 00000000000..5a6ef8deda1 --- /dev/null +++ b/arch/mips/alchemy/devboards/db1200/platform.c @@ -0,0 +1,510 @@ +/* + * DBAu1200 board platform device registration + * + * Copyright (C) 2008-2009 Manuel Lauss + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +#include "../platform.h" + +static struct mtd_partition db1200_spiflash_parts[] = { + { + .name = "DB1200 SPI flash", + .offset = 0, + .size = MTDPART_SIZ_FULL, + }, +}; + +static struct flash_platform_data db1200_spiflash_data = { + .name = "s25fl001", + .parts = db1200_spiflash_parts, + .nr_parts = ARRAY_SIZE(db1200_spiflash_parts), + .type = "m25p10", +}; + +static struct spi_board_info db1200_spi_devs[] __initdata = { + { + /* TI TMP121AIDBVR temp sensor */ + .modalias = "tmp121", + .max_speed_hz = 2000000, + .bus_num = 0, + .chip_select = 0, + .mode = 0, + }, + { + /* Spansion S25FL001D0FMA SPI flash */ + .modalias = "m25p80", + .max_speed_hz = 50000000, + .bus_num = 0, + .chip_select = 1, + .mode = 0, + .platform_data = &db1200_spiflash_data, + }, +}; + +static struct i2c_board_info db1200_i2c_devs[] __initdata = { + { + /* AT24C04-10 I2C eeprom */ + I2C_BOARD_INFO("24c04", 0x52), + }, + { + /* Philips NE1619 temp/voltage sensor (adm1025 drv) */ + I2C_BOARD_INFO("ne1619", 0x2d), + }, + { + /* I2S audio codec WM8731 */ + I2C_BOARD_INFO("wm8731", 0x1b), + }, +}; + +/**********************************************************************/ + +static void au1200_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, + unsigned int ctrl) +{ + struct nand_chip *this = mtd->priv; + unsigned long ioaddr = (unsigned long)this->IO_ADDR_W; + + ioaddr &= 0xffffff00; + + if (ctrl & NAND_CLE) { + ioaddr += MEM_STNAND_CMD; + } else if (ctrl & NAND_ALE) { + ioaddr += MEM_STNAND_ADDR; + } else { + /* assume we want to r/w real data by default */ + ioaddr += MEM_STNAND_DATA; + } + this->IO_ADDR_R = this->IO_ADDR_W = (void __iomem *)ioaddr; + if (cmd != NAND_CMD_NONE) { + __raw_writeb(cmd, this->IO_ADDR_W); + wmb(); + } +} + +static int au1200_nand_device_ready(struct mtd_info *mtd) +{ + return __raw_readl((void __iomem *)MEM_STSTAT) & 1; +} + +static const char *db1200_part_probes[] = { "cmdlinepart", NULL }; + +static struct mtd_partition db1200_nand_parts[] = { + { + .name = "NAND FS 0", + .offset = 0, + .size = 8 * 1024 * 1024, + }, + { + .name = "NAND FS 1", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL + }, +}; + +struct platform_nand_data db1200_nand_platdata = { + .chip = { + .nr_chips = 1, + .chip_offset = 0, + .nr_partitions = ARRAY_SIZE(db1200_nand_parts), + .partitions = db1200_nand_parts, + .chip_delay = 20, + .part_probe_types = db1200_part_probes, + }, + .ctrl = { + .dev_ready = au1200_nand_device_ready, + .cmd_ctrl = au1200_nand_cmd_ctrl, + }, +}; + +static struct resource db1200_nand_res[] = { + [0] = { + .start = DB1200_NAND_PHYS_ADDR, + .end = DB1200_NAND_PHYS_ADDR + 0xff, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device db1200_nand_dev = { + .name = "gen_nand", + .num_resources = ARRAY_SIZE(db1200_nand_res), + .resource = db1200_nand_res, + .id = -1, + .dev = { + .platform_data = &db1200_nand_platdata, + } +}; + +/**********************************************************************/ + +static struct smc91x_platdata db1200_eth_data = { + .flags = SMC91X_NOWAIT | SMC91X_USE_16BIT, + .leda = RPC_LED_100_10, + .ledb = RPC_LED_TX_RX, +}; + +static struct resource db1200_eth_res[] = { + [0] = { + .start = DB1200_ETH_PHYS_ADDR, + .end = DB1200_ETH_PHYS_ADDR + 0xf, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = DB1200_ETH_INT, + .end = DB1200_ETH_INT, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device db1200_eth_dev = { + .dev = { + .platform_data = &db1200_eth_data, + }, + .name = "smc91x", + .id = -1, + .num_resources = ARRAY_SIZE(db1200_eth_res), + .resource = db1200_eth_res, +}; + +/**********************************************************************/ + +static struct resource db1200_ide_res[] = { + [0] = { + .start = DB1200_IDE_PHYS_ADDR, + .end = DB1200_IDE_PHYS_ADDR + DB1200_IDE_PHYS_LEN - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = DB1200_IDE_INT, + .end = DB1200_IDE_INT, + .flags = IORESOURCE_IRQ, + } +}; + +static u64 ide_dmamask = DMA_32BIT_MASK; + +static struct platform_device db1200_ide_dev = { + .name = "au1200-ide", + .id = 0, + .dev = { + .dma_mask = &ide_dmamask, + .coherent_dma_mask = DMA_32BIT_MASK, + }, + .num_resources = ARRAY_SIZE(db1200_ide_res), + .resource = db1200_ide_res, +}; + +/**********************************************************************/ + +static struct platform_device db1200_rtc_dev = { + .name = "rtc-au1xxx", + .id = -1, +}; + +/**********************************************************************/ + +/* SD carddetects: they're supposed to be edge-triggered, but ack + * doesn't seem to work (CPLD Rev 2). Instead, the screaming one + * is disabled and its counterpart enabled. The 500ms timeout is + * because the carddetect isn't debounced in hardware. + */ +static irqreturn_t db1200_mmc_cd(int irq, void *ptr) +{ + void(*mmc_cd)(struct mmc_host *, unsigned long); + + if (irq == DB1200_SD0_INSERT_INT) { + disable_irq_nosync(DB1200_SD0_INSERT_INT); + enable_irq(DB1200_SD0_EJECT_INT); + } else { + disable_irq_nosync(DB1200_SD0_EJECT_INT); + enable_irq(DB1200_SD0_INSERT_INT); + } + + /* link against CONFIG_MMC=m */ + mmc_cd = symbol_get(mmc_detect_change); + if (mmc_cd) { + mmc_cd(ptr, msecs_to_jiffies(500)); + symbol_put(mmc_detect_change); + } + + return IRQ_HANDLED; +} + +static int db1200_mmc_cd_setup(void *mmc_host, int en) +{ + int ret; + + if (en) { + ret = request_irq(DB1200_SD0_INSERT_INT, db1200_mmc_cd, + IRQF_DISABLED, "sd_insert", mmc_host); + if (ret) + goto out; + + ret = request_irq(DB1200_SD0_EJECT_INT, db1200_mmc_cd, + IRQF_DISABLED, "sd_eject", mmc_host); + if (ret) { + free_irq(DB1200_SD0_INSERT_INT, mmc_host); + goto out; + } + + if (bcsr_read(BCSR_SIGSTAT) & BCSR_INT_SD0INSERT) + enable_irq(DB1200_SD0_EJECT_INT); + else + enable_irq(DB1200_SD0_INSERT_INT); + + } else { + free_irq(DB1200_SD0_INSERT_INT, mmc_host); + free_irq(DB1200_SD0_EJECT_INT, mmc_host); + } + ret = 0; +out: + return ret; +} + +static void db1200_mmc_set_power(void *mmc_host, int state) +{ + if (state) { + bcsr_mod(BCSR_BOARD, 0, BCSR_BOARD_SD0PWR); + msleep(400); /* stabilization time */ + } else + bcsr_mod(BCSR_BOARD, BCSR_BOARD_SD0PWR, 0); +} + +static int db1200_mmc_card_readonly(void *mmc_host) +{ + return (bcsr_read(BCSR_STATUS) & BCSR_STATUS_SD0WP) ? 1 : 0; +} + +static int db1200_mmc_card_inserted(void *mmc_host) +{ + return (bcsr_read(BCSR_SIGSTAT) & BCSR_INT_SD0INSERT) ? 1 : 0; +} + +static void db1200_mmcled_set(struct led_classdev *led, + enum led_brightness brightness) +{ + if (brightness != LED_OFF) + bcsr_mod(BCSR_LEDS, BCSR_LEDS_LED0, 0); + else + bcsr_mod(BCSR_LEDS, 0, BCSR_LEDS_LED0); +} + +static struct led_classdev db1200_mmc_led = { + .brightness_set = db1200_mmcled_set, +}; + +/* needed by arch/mips/alchemy/common/platform.c */ +struct au1xmmc_platform_data au1xmmc_platdata[] = { + [0] = { + .cd_setup = db1200_mmc_cd_setup, + .set_power = db1200_mmc_set_power, + .card_inserted = db1200_mmc_card_inserted, + .card_readonly = db1200_mmc_card_readonly, + .led = &db1200_mmc_led, + }, +}; + +/**********************************************************************/ + +static struct resource au1200_psc0_res[] = { + [0] = { + .start = PSC0_PHYS_ADDR, + .end = PSC0_PHYS_ADDR + 0x000fffff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AU1200_PSC0_INT, + .end = AU1200_PSC0_INT, + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = DSCR_CMD0_PSC0_TX, + .end = DSCR_CMD0_PSC0_TX, + .flags = IORESOURCE_DMA, + }, + [3] = { + .start = DSCR_CMD0_PSC0_RX, + .end = DSCR_CMD0_PSC0_RX, + .flags = IORESOURCE_DMA, + }, +}; + +static struct platform_device db1200_i2c_dev = { + .name = "au1xpsc_smbus", + .id = 0, /* bus number */ + .num_resources = ARRAY_SIZE(au1200_psc0_res), + .resource = au1200_psc0_res, +}; + +static void db1200_spi_cs_en(struct au1550_spi_info *spi, int cs, int pol) +{ + if (cs) + bcsr_mod(BCSR_RESETS, 0, BCSR_RESETS_SPISEL); + else + bcsr_mod(BCSR_RESETS, BCSR_RESETS_SPISEL, 0); +} + +static struct au1550_spi_info db1200_spi_platdata = { + .mainclk_hz = 50000000, /* PSC0 clock */ + .num_chipselect = 2, + .activate_cs = db1200_spi_cs_en, +}; + +static u64 spi_dmamask = DMA_32BIT_MASK; + +static struct platform_device db1200_spi_dev = { + .dev = { + .dma_mask = &spi_dmamask, + .coherent_dma_mask = DMA_32BIT_MASK, + .platform_data = &db1200_spi_platdata, + }, + .name = "au1550-spi", + .id = 0, /* bus number */ + .num_resources = ARRAY_SIZE(au1200_psc0_res), + .resource = au1200_psc0_res, +}; + +static struct platform_device *db1200_devs[] __initdata = { + NULL, /* PSC0, selected by S6.8 */ + &db1200_ide_dev, + &db1200_eth_dev, + &db1200_rtc_dev, + &db1200_nand_dev, +}; + +static int __init db1200_dev_init(void) +{ + unsigned long pfc; + unsigned short sw; + int swapped; + + i2c_register_board_info(0, db1200_i2c_devs, + ARRAY_SIZE(db1200_i2c_devs)); + spi_register_board_info(db1200_spi_devs, + ARRAY_SIZE(db1200_i2c_devs)); + + /* SWITCHES: S6.8 I2C/SPI selector (OFF=I2C ON=SPI) + */ + + /* NOTE: GPIO215 controls OTG VBUS supply. In SPI mode however + * this pin is claimed by PSC0 (unused though, but pinmux doesn't + * allow to free it without crippling the SPI interface). + * As a result, in SPI mode, OTG simply won't work (PSC0 uses + * it as an input pin which is pulled high on the boards). + */ + pfc = __raw_readl((void __iomem *)SYS_PINFUNC) & ~SYS_PINFUNC_P0A; + + /* switch off OTG VBUS supply */ + gpio_request(215, "otg-vbus"); + gpio_direction_output(215, 1); + + printk(KERN_INFO "DB1200 device configuration:\n"); + + sw = bcsr_read(BCSR_SWITCHES); + if (sw & BCSR_SWITCHES_DIP_8) { + db1200_devs[0] = &db1200_i2c_dev; + bcsr_mod(BCSR_RESETS, BCSR_RESETS_PSC0MUX, 0); + + pfc |= (2 << 17); /* GPIO2 block owns GPIO215 */ + + printk(KERN_INFO " S6.8 OFF: PSC0 mode I2C\n"); + printk(KERN_INFO " OTG port VBUS supply available!\n"); + } else { + db1200_devs[0] = &db1200_spi_dev; + bcsr_mod(BCSR_RESETS, 0, BCSR_RESETS_PSC0MUX); + + pfc |= (1 << 17); /* PSC0 owns GPIO215 */ + + printk(KERN_INFO " S6.8 ON : PSC0 mode SPI\n"); + printk(KERN_INFO " OTG port VBUS supply disabled\n"); + } + __raw_writel(pfc, (void __iomem *)SYS_PINFUNC); + wmb(); + + db1x_register_pcmcia_socket(PCMCIA_ATTR_PSEUDO_PHYS, + PCMCIA_ATTR_PSEUDO_PHYS + 0x00040000 - 1, + PCMCIA_MEM_PSEUDO_PHYS, + PCMCIA_MEM_PSEUDO_PHYS + 0x00040000 - 1, + PCMCIA_IO_PSEUDO_PHYS, + PCMCIA_IO_PSEUDO_PHYS + 0x00001000 - 1, + DB1200_PC0_INT, + DB1200_PC0_INSERT_INT, + /*DB1200_PC0_STSCHG_INT*/0, + DB1200_PC0_EJECT_INT, + 0); + + db1x_register_pcmcia_socket(PCMCIA_ATTR_PSEUDO_PHYS + 0x00400000, + PCMCIA_ATTR_PSEUDO_PHYS + 0x00440000 - 1, + PCMCIA_MEM_PSEUDO_PHYS + 0x00400000, + PCMCIA_MEM_PSEUDO_PHYS + 0x00440000 - 1, + PCMCIA_IO_PSEUDO_PHYS + 0x00400000, + PCMCIA_IO_PSEUDO_PHYS + 0x00401000 - 1, + DB1200_PC1_INT, + DB1200_PC1_INSERT_INT, + /*DB1200_PC1_STSCHG_INT*/0, + DB1200_PC1_EJECT_INT, + 1); + + swapped = bcsr_read(BCSR_STATUS) & BCSR_STATUS_DB1200_SWAPBOOT; + db1x_register_norflash(64 << 20, 2, swapped); + + return platform_add_devices(db1200_devs, ARRAY_SIZE(db1200_devs)); +} +device_initcall(db1200_dev_init); + +/* au1200fb calls these: STERBT EINEN TRAGISCHEN TOD!!! */ +int board_au1200fb_panel(void) +{ + return (bcsr_read(BCSR_SWITCHES) >> 8) & 0x0f; +} + +int board_au1200fb_panel_init(void) +{ + /* Apply power */ + bcsr_mod(BCSR_BOARD, 0, BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD | + BCSR_BOARD_LCDBL); + return 0; +} + +int board_au1200fb_panel_shutdown(void) +{ + /* Remove power */ + bcsr_mod(BCSR_BOARD, BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD | + BCSR_BOARD_LCDBL, 0); + return 0; +} diff --git a/arch/mips/alchemy/devboards/db1200/setup.c b/arch/mips/alchemy/devboards/db1200/setup.c new file mode 100644 index 00000000000..a3458c0e405 --- /dev/null +++ b/arch/mips/alchemy/devboards/db1200/setup.c @@ -0,0 +1,137 @@ +/* + * Alchemy/AMD/RMI DB1200 board setup. + * + * Licensed under the terms outlined in the file COPYING in the root of + * this source archive. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +const char *get_system_type(void) +{ + return "Alchemy Db1200"; +} + +static void board_power_off(void) +{ + bcsr_write(BCSR_RESETS, 0); + bcsr_write(BCSR_SYSTEM, BCSR_SYSTEM_PWROFF | BCSR_SYSTEM_RESET); +} + +void board_reset(void) +{ + bcsr_write(BCSR_RESETS, 0); + bcsr_write(BCSR_SYSTEM, 0); +} + +void __init board_setup(void) +{ + unsigned long freq0, clksrc, div, pfc; + unsigned short whoami; + + bcsr_init(DB1200_BCSR_PHYS_ADDR, + DB1200_BCSR_PHYS_ADDR + DB1200_BCSR_HEXLED_OFS); + + whoami = bcsr_read(BCSR_WHOAMI); + printk(KERN_INFO "Alchemy/AMD/RMI DB1200 Board, CPLD Rev %d" + " Board-ID %d Daughtercard ID %d\n", + (whoami >> 4) & 0xf, (whoami >> 8) & 0xf, whoami & 0xf); + + /* SMBus/SPI on PSC0, Audio on PSC1 */ + pfc = __raw_readl((void __iomem *)SYS_PINFUNC); + pfc &= ~(SYS_PINFUNC_P0A | SYS_PINFUNC_P0B); + pfc &= ~(SYS_PINFUNC_P1A | SYS_PINFUNC_P1B | SYS_PINFUNC_FS3); + pfc |= SYS_PINFUNC_P1C; /* SPI is configured later */ + __raw_writel(pfc, (void __iomem *)SYS_PINFUNC); + wmb(); + + /* Clock configurations: PSC0: ~50MHz via Clkgen0, derived from + * CPU clock; all other clock generators off/unused. + */ + div = (get_au1x00_speed() + 25000000) / 50000000; + if (div & 1) + div++; + div = ((div >> 1) - 1) & 0xff; + + freq0 = div << SYS_FC_FRDIV0_BIT; + __raw_writel(freq0, (void __iomem *)SYS_FREQCTRL0); + wmb(); + freq0 |= SYS_FC_FE0; /* enable F0 */ + __raw_writel(freq0, (void __iomem *)SYS_FREQCTRL0); + wmb(); + + /* psc0_intclk comes 1:1 from F0 */ + clksrc = SYS_CS_MUX_FQ0 << SYS_CS_ME0_BIT; + __raw_writel(clksrc, (void __iomem *)SYS_CLKSRC); + wmb(); + + pm_power_off = board_power_off; + _machine_halt = board_power_off; + _machine_restart = (void(*)(char *))board_reset; +} + +/* use the hexleds to count the number of times the cpu has entered + * wait, the dots to indicate whether the CPU is currently idle or + * active (dots off = sleeping, dots on = working) for cases where + * the number doesn't change for a long(er) period of time. + */ +static void db1200_wait(void) +{ + __asm__(" .set push \n" + " .set mips3 \n" + " .set noreorder \n" + " cache 0x14, 0(%0) \n" + " cache 0x14, 32(%0) \n" + " cache 0x14, 64(%0) \n" + /* dots off: we're about to call wait */ + " lui $26, 0xb980 \n" + " ori $27, $0, 3 \n" + " sb $27, 0x18($26) \n" + " sync \n" + " nop \n" + " wait \n" + " nop \n" + " nop \n" + " nop \n" + " nop \n" + " nop \n" + /* dots on: there's work to do, increment cntr */ + " lui $26, 0xb980 \n" + " sb $0, 0x18($26) \n" + " lui $26, 0xb9c0 \n" + " lb $27, 0($26) \n" + " addiu $27, $27, 1 \n" + " sb $27, 0($26) \n" + " sync \n" + " .set pop \n" + : : "r" (db1200_wait)); +} + +static int __init db1200_arch_init(void) +{ + /* GPIO7 is low-level triggered CPLD cascade */ + set_irq_type(AU1200_GPIO7_INT, IRQF_TRIGGER_LOW); + bcsr_init_irq(DB1200_INT_BEGIN, DB1200_INT_END, AU1200_GPIO7_INT); + + /* do not autoenable these: CPLD has broken edge int handling, + * and the CD handler setup requires manual enabling to work + * around that. + */ + irq_to_desc(DB1200_SD0_INSERT_INT)->status |= IRQ_NOAUTOEN; + irq_to_desc(DB1200_SD0_EJECT_INT)->status |= IRQ_NOAUTOEN; + + if (cpu_wait) + cpu_wait = db1200_wait; + + return 0; +} +arch_initcall(db1200_arch_init); diff --git a/arch/mips/alchemy/devboards/pb1200/board_setup.c b/arch/mips/alchemy/devboards/pb1200/board_setup.c index 352acf68fc8..2cf59e72824 100644 --- a/arch/mips/alchemy/devboards/pb1200/board_setup.c +++ b/arch/mips/alchemy/devboards/pb1200/board_setup.c @@ -58,16 +58,9 @@ void __init board_setup(void) { char *argptr; -#ifdef CONFIG_MIPS_PB1200 printk(KERN_INFO "AMD Alchemy Pb1200 Board\n"); bcsr_init(PB1200_BCSR_PHYS_ADDR, PB1200_BCSR_PHYS_ADDR + PB1200_BCSR_HEXLED_OFS); -#endif -#ifdef CONFIG_MIPS_DB1200 - printk(KERN_INFO "AMD Alchemy Db1200 Board\n"); - bcsr_init(DB1200_BCSR_PHYS_ADDR, - DB1200_BCSR_PHYS_ADDR + DB1200_BCSR_HEXLED_OFS); -#endif argptr = prom_getcmdline(); #ifdef CONFIG_SERIAL_8250_CONSOLE @@ -149,7 +142,6 @@ void __init board_setup(void) static int __init pb1200_init_irq(void) { -#ifdef CONFIG_MIPS_PB1200 /* We have a problem with CPLD rev 3. */ if (BCSR_WHOAMI_CPLD(bcsr_read(BCSR_WHOAMI)) <= 3) { printk(KERN_ERR "WARNING!!!\n"); @@ -169,7 +161,6 @@ static int __init pb1200_init_irq(void) printk(KERN_ERR "WARNING!!!\n"); panic("Game over. Your score is 0."); } -#endif set_irq_type(AU1200_GPIO7_INT, IRQF_TRIGGER_LOW); bcsr_init_irq(PB1200_INT_BEGIN, PB1200_INT_END, AU1200_GPIO7_INT); diff --git a/arch/mips/alchemy/devboards/pb1200/platform.c b/arch/mips/alchemy/devboards/pb1200/platform.c index 736d647ebe0..14e889fffcc 100644 --- a/arch/mips/alchemy/devboards/pb1200/platform.c +++ b/arch/mips/alchemy/devboards/pb1200/platform.c @@ -68,7 +68,6 @@ static struct led_classdev pb1200mmc_led = { .brightness_set = pb1200_mmcled_set, }; -#ifndef CONFIG_MIPS_DB1200 static void pb1200mmc1_set_power(void *mmc_host, int state) { if (state) @@ -88,7 +87,6 @@ static int pb1200mmc1_card_inserted(void *mmc_host) { return (bcsr_read(BCSR_SIGSTAT) & BCSR_INT_SD1INSERT) ? 1 : 0; } -#endif const struct au1xmmc_platform_data au1xmmc_platdata[2] = { [0] = { @@ -98,7 +96,6 @@ const struct au1xmmc_platform_data au1xmmc_platdata[2] = { .cd_setup = NULL, /* use poll-timer in driver */ .led = &pb1200mmc_led, }, -#ifndef CONFIG_MIPS_DB1200 [1] = { .set_power = pb1200mmc1_set_power, .card_inserted = pb1200mmc1_card_inserted, @@ -106,7 +103,6 @@ const struct au1xmmc_platform_data au1xmmc_platdata[2] = { .cd_setup = NULL, /* use poll-timer in driver */ .led = &pb1200mmc_led, }, -#endif }; static struct resource ide_resources[] = { @@ -174,7 +170,6 @@ static int __init board_register_devices(void) { int swapped; -#ifdef CONFIG_MIPS_PB1200 db1x_register_pcmcia_socket(PCMCIA_ATTR_PSEUDO_PHYS, PCMCIA_ATTR_PSEUDO_PHYS + 0x00040000 - 1, PCMCIA_MEM_PSEUDO_PHYS, @@ -198,38 +193,9 @@ static int __init board_register_devices(void) /*PB1200_PC1_STSCHG_INT*/0, PB1200_PC1_EJECT_INT, 1); -#else - db1x_register_pcmcia_socket(PCMCIA_ATTR_PSEUDO_PHYS, - PCMCIA_ATTR_PSEUDO_PHYS + 0x00040000 - 1, - PCMCIA_MEM_PSEUDO_PHYS, - PCMCIA_MEM_PSEUDO_PHYS + 0x00040000 - 1, - PCMCIA_IO_PSEUDO_PHYS, - PCMCIA_IO_PSEUDO_PHYS + 0x00001000 - 1, - DB1200_PC0_INT, - DB1200_PC0_INSERT_INT, - /*DB1200_PC0_STSCHG_INT*/0, - DB1200_PC0_EJECT_INT, - 0); - - db1x_register_pcmcia_socket(PCMCIA_ATTR_PSEUDO_PHYS + 0x00400000, - PCMCIA_ATTR_PSEUDO_PHYS + 0x00440000 - 1, - PCMCIA_MEM_PSEUDO_PHYS + 0x00400000, - PCMCIA_MEM_PSEUDO_PHYS + 0x00440000 - 1, - PCMCIA_IO_PSEUDO_PHYS + 0x00400000, - PCMCIA_IO_PSEUDO_PHYS + 0x00401000 - 1, - DB1200_PC1_INT, - DB1200_PC1_INSERT_INT, - /*DB1200_PC1_STSCHG_INT*/0, - DB1200_PC1_EJECT_INT, - 1); -#endif swapped = bcsr_read(BCSR_STATUS) & BCSR_STATUS_DB1200_SWAPBOOT; -#ifdef CONFIG_MIPS_PB1200 db1x_register_norflash(128 * 1024 * 1024, 2, swapped); -#else - db1x_register_norflash(64 * 1024 * 1024, 2, swapped); -#endif return platform_add_devices(board_platform_devices, ARRAY_SIZE(board_platform_devices)); diff --git a/arch/mips/include/asm/mach-db1x00/db1200.h b/arch/mips/include/asm/mach-db1x00/db1200.h index 52b1d84a92c..3404248f509 100644 --- a/arch/mips/include/asm/mach-db1x00/db1200.h +++ b/arch/mips/include/asm/mach-db1x00/db1200.h @@ -28,24 +28,6 @@ #include #include -#define DBDMA_AC97_TX_CHAN DSCR_CMD0_PSC1_TX -#define DBDMA_AC97_RX_CHAN DSCR_CMD0_PSC1_RX -#define DBDMA_I2S_TX_CHAN DSCR_CMD0_PSC1_TX -#define DBDMA_I2S_RX_CHAN DSCR_CMD0_PSC1_RX - -/* - * SPI and SMB are muxed on the DBAu1200 board. - * Refer to board documentation. - */ -#define SPI_PSC_BASE PSC0_BASE_ADDR -#define SMBUS_PSC_BASE PSC0_BASE_ADDR -/* - * AC'97 and I2S are muxed on the DBAu1200 board. - * Refer to board documentation. - */ -#define AC97_PSC_BASE PSC1_BASE_ADDR -#define I2S_PSC_BASE PSC1_BASE_ADDR - /* Bit positions for the different interrupt sources */ #define BCSR_INT_IDE 0x0001 #define BCSR_INT_ETH 0x0002 @@ -62,17 +44,15 @@ #define BCSR_INT_SD0INSERT 0x1000 #define BCSR_INT_SD0EJECT 0x2000 -#define SMC91C111_PHYS_ADDR 0x19000300 -#define SMC91C111_INT DB1200_ETH_INT - #define IDE_PHYS_ADDR 0x18800000 #define IDE_REG_SHIFT 5 -#define IDE_PHYS_LEN (16 << IDE_REG_SHIFT) -#define IDE_INT DB1200_IDE_INT #define IDE_DDMA_REQ DSCR_CMD0_DMA_REQ1 #define IDE_RQSIZE 128 -#define NAND_PHYS_ADDR 0x20000000 +#define DB1200_IDE_PHYS_ADDR IDE_PHYS_ADDR +#define DB1200_IDE_PHYS_LEN (16 << IDE_REG_SHIFT) +#define DB1200_ETH_PHYS_ADDR 0x19000300 +#define DB1200_NAND_PHYS_ADDR 0x20000000 /* * External Interrupts for DBAu1200 as of 8/6/2004. @@ -82,7 +62,7 @@ * Example: IDE bis pos is = 64 - 64 * ETH bit pos is = 65 - 64 */ -enum external_pb1200_ints { +enum external_db1200_ints { DB1200_INT_BEGIN = AU1000_MAX_INTR + 1, DB1200_IDE_INT = DB1200_INT_BEGIN, @@ -103,7 +83,4 @@ enum external_pb1200_ints { DB1200_INT_END = DB1200_INT_BEGIN + 15, }; -/* NAND chip select */ -#define NAND_CS 1 - #endif /* __ASM_DB1200_H */