Everything should be in sync now.
Signed-off-by: Markus Grabner <grabner@icg.tugraz.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
/*
- * Line6 Linux USB driver - 0.9.0
+ * Line6 Linux USB driver - 0.9.1beta
*
* Copyright (C) 2004-2010 Markus Grabner (grabner@icg.tugraz.at)
*
#include "driver.h"
#include "audio.h"
-
static int line6_index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX;
static char *line6_id[SNDRV_CARDS] = SNDRV_DEFAULT_STR;
-
/*
Initialize the Line6 USB audio system.
*/
strcpy(card->id, line6->properties->id);
strcpy(card->driver, DRIVER_NAME);
strcpy(card->shortname, line6->properties->name);
- sprintf(card->longname, "Line6 %s at USB %s", line6->properties->name,
- dev_name(line6->ifcdev)); /* 80 chars - see asound.h */
+ sprintf(card->longname, "Line6 %s at USB %s", line6->properties->name, dev_name(line6->ifcdev)); /* 80 chars - see asound.h */
return 0;
}
/*
- * Line6 Linux USB driver - 0.9.0
+ * Line6 Linux USB driver - 0.9.1beta
*
* Copyright (C) 2004-2010 Markus Grabner (grabner@icg.tugraz.at)
*
#ifndef AUDIO_H
#define AUDIO_H
-
#include "driver.h"
-
extern void line6_cleanup_audio(struct usb_line6 *);
extern int line6_init_audio(struct usb_line6 *);
extern int line6_register_audio(struct usb_line6 *);
-
#endif
/*
- * Line6 Linux USB driver - 0.9.0
+ * Line6 Linux USB driver - 0.9.1beta
*
* Copyright (C) 2004-2010 Markus Grabner (grabner@icg.tugraz.at)
*
#include "pcm.h"
#include "pod.h"
-
/*
Find a free URB and submit it.
*/
int index;
unsigned long flags;
int i, urb_size;
+ int ret;
struct urb *urb_in;
spin_lock_irqsave(&line6pcm->lock_audio_in, flags);
urb_in->transfer_buffer_length = urb_size;
urb_in->context = line6pcm;
- if (usb_submit_urb(urb_in, GFP_ATOMIC) == 0)
+ ret = usb_submit_urb(urb_in, GFP_ATOMIC);
+
+ if (ret == 0)
set_bit(index, &line6pcm->active_urb_in);
else
dev_err(line6pcm->line6->ifcdev,
- "URB in #%d submission failed\n", index);
+ "URB in #%d submission failed (%d)\n", index, ret);
spin_unlock_irqrestore(&line6pcm->lock_audio_in, flags);
return 0;
if (line6pcm->pos_in_done + frames > runtime->buffer_size) {
/*
- The transferred area goes over buffer boundary,
- copy two separate chunks.
- */
+ The transferred area goes over buffer boundary,
+ copy two separate chunks.
+ */
int len;
len = runtime->buffer_size - line6pcm->pos_in_done;
int fsize;
struct usb_iso_packet_descriptor *fin = &urb->iso_frame_desc[i];
- if (fin->status == -18) {
+ if (fin->status == -EXDEV) {
shutdown = 1;
break;
}
if (!shutdown) {
submit_audio_in_urb(line6pcm);
- if (test_bit(BIT_PCM_ALSA_CAPTURE, &line6pcm->flags))
- line6_capture_check_period(line6pcm, length);
+#ifdef CONFIG_LINE6_USB_IMPULSE_RESPONSE
+ if (!(line6pcm->flags & MASK_PCM_IMPULSE))
+#endif
+ if (test_bit(BIT_PCM_ALSA_CAPTURE, &line6pcm->flags))
+ line6_capture_check_period(line6pcm, length);
}
}
err = snd_pcm_hw_constraint_ratdens(runtime, 0,
SNDRV_PCM_HW_PARAM_RATE,
- (&line6pcm->properties->
- snd_line6_rates));
+ (&line6pcm->
+ properties->snd_line6_rates));
if (err < 0)
return err;
/* capture operators */
struct snd_pcm_ops snd_line6_capture_ops = {
- .open = snd_line6_capture_open,
- .close = snd_line6_capture_close,
- .ioctl = snd_pcm_lib_ioctl,
- .hw_params = snd_line6_capture_hw_params,
- .hw_free = snd_line6_capture_hw_free,
- .prepare = snd_line6_prepare,
- .trigger = snd_line6_trigger,
- .pointer = snd_line6_capture_pointer,
+ .open = snd_line6_capture_open,
+ .close = snd_line6_capture_close,
+ .ioctl = snd_pcm_lib_ioctl,
+ .hw_params = snd_line6_capture_hw_params,
+ .hw_free = snd_line6_capture_hw_free,
+ .prepare = snd_line6_prepare,
+ .trigger = snd_line6_trigger,
+ .pointer = snd_line6_capture_pointer,
};
int line6_create_audio_in_urbs(struct snd_line6_pcm *line6pcm)
urb->dev = line6pcm->line6->usbdev;
urb->pipe =
usb_rcvisocpipe(line6pcm->line6->usbdev,
- line6pcm->
- ep_audio_read & USB_ENDPOINT_NUMBER_MASK);
+ line6pcm->ep_audio_read &
+ USB_ENDPOINT_NUMBER_MASK);
urb->transfer_flags = URB_ISO_ASAP;
urb->start_frame = -1;
urb->number_of_packets = LINE6_ISO_PACKETS;
/*
- * Line6 Linux USB driver - 0.9.0
+ * Line6 Linux USB driver - 0.9.1beta
*
* Copyright (C) 2004-2010 Markus Grabner (grabner@icg.tugraz.at)
*
#ifndef CAPTURE_H
#define CAPTURE_H
-
#include <sound/pcm.h>
#include "driver.h"
#include "pcm.h"
-
extern struct snd_pcm_ops snd_line6_capture_ops;
extern void line6_capture_copy(struct snd_line6_pcm *line6pcm, char *fbuf,
int fsize);
+extern void line6_capture_check_period(struct snd_line6_pcm *line6pcm,
+ int length);
extern int line6_create_audio_in_urbs(struct snd_line6_pcm *line6pcm);
extern int line6_submit_audio_in_all_urbs(struct snd_line6_pcm *line6pcm);
extern void line6_unlink_audio_in_urbs(struct snd_line6_pcm *line6pcm);
/*
- * Line6 Linux USB driver - 0.9.0
+ * Line6 Linux USB driver - 0.9.1beta
*
* Copyright (C) 2004-2010 Markus Grabner (grabner@icg.tugraz.at)
*
/*
- * Line6 Linux USB driver - 0.9.0
+ * Line6 Linux USB driver - 0.9.1beta
*
* Copyright (C) 2004-2010 Markus Grabner (grabner@icg.tugraz.at)
*
from "control.h", and this process depends on the exact formatting of the
code and the comments below!
*/
+
/* *INDENT-OFF* */
+
enum {
POD_tweak = 1,
POD_wah_position = 4,
VARIAXMIDI_tone = 79,
};
+/* *INDENT-ON* */
extern int line6_pod_create_files(int firmware, int type, struct device *dev);
extern void line6_pod_remove_files(int firmware, int type, struct device *dev);
-extern int line6_variax_create_files(int firmware, int type, struct device *dev);
-extern void line6_variax_remove_files(int firmware, int type, struct device *dev);
-
+extern int line6_variax_create_files(int firmware, int type,
+ struct device *dev);
+extern void line6_variax_remove_files(int firmware, int type,
+ struct device *dev);
#endif
/*
- * Line6 Linux USB driver - 0.9.0
+ * Line6 Linux USB driver - 0.9.1beta
*
* Copyright (C) 2004-2010 Markus Grabner (grabner@icg.tugraz.at)
*
#include "usbdefs.h"
#include "variax.h"
-
#define DRIVER_AUTHOR "Markus Grabner <grabner@icg.tugraz.at>"
#define DRIVER_DESC "Line6 USB Driver"
-#define DRIVER_VERSION "0.9.0"
-
+#define DRIVER_VERSION "0.9.1beta" DRIVER_REVISION
/* table of devices that work with this driver */
static const struct usb_device_id line6_id_table[] = {
- { USB_DEVICE(LINE6_VENDOR_ID, LINE6_DEVID_BASSPODXT) },
- { USB_DEVICE(LINE6_VENDOR_ID, LINE6_DEVID_BASSPODXTLIVE) },
- { USB_DEVICE(LINE6_VENDOR_ID, LINE6_DEVID_BASSPODXTPRO) },
- { USB_DEVICE(LINE6_VENDOR_ID, LINE6_DEVID_GUITARPORT) },
- { USB_DEVICE(LINE6_VENDOR_ID, LINE6_DEVID_POCKETPOD) },
- { USB_DEVICE(LINE6_VENDOR_ID, LINE6_DEVID_PODSTUDIO_GX) },
- { USB_DEVICE(LINE6_VENDOR_ID, LINE6_DEVID_PODSTUDIO_UX1) },
- { USB_DEVICE(LINE6_VENDOR_ID, LINE6_DEVID_PODSTUDIO_UX2) },
- { USB_DEVICE(LINE6_VENDOR_ID, LINE6_DEVID_PODX3) },
- { USB_DEVICE(LINE6_VENDOR_ID, LINE6_DEVID_PODX3LIVE) },
- { USB_DEVICE(LINE6_VENDOR_ID, LINE6_DEVID_PODXT) },
- { USB_DEVICE(LINE6_VENDOR_ID, LINE6_DEVID_PODXTLIVE) },
- { USB_DEVICE(LINE6_VENDOR_ID, LINE6_DEVID_PODXTPRO) },
- { USB_DEVICE(LINE6_VENDOR_ID, LINE6_DEVID_TONEPORT_GX) },
- { USB_DEVICE(LINE6_VENDOR_ID, LINE6_DEVID_TONEPORT_UX1) },
- { USB_DEVICE(LINE6_VENDOR_ID, LINE6_DEVID_TONEPORT_UX2) },
- { USB_DEVICE(LINE6_VENDOR_ID, LINE6_DEVID_VARIAX) },
- { },
+ {USB_DEVICE(LINE6_VENDOR_ID, LINE6_DEVID_BASSPODXT)},
+ {USB_DEVICE(LINE6_VENDOR_ID, LINE6_DEVID_BASSPODXTLIVE)},
+ {USB_DEVICE(LINE6_VENDOR_ID, LINE6_DEVID_BASSPODXTPRO)},
+ {USB_DEVICE(LINE6_VENDOR_ID, LINE6_DEVID_GUITARPORT)},
+ {USB_DEVICE(LINE6_VENDOR_ID, LINE6_DEVID_POCKETPOD)},
+ {USB_DEVICE(LINE6_VENDOR_ID, LINE6_DEVID_PODSTUDIO_GX)},
+ {USB_DEVICE(LINE6_VENDOR_ID, LINE6_DEVID_PODSTUDIO_UX1)},
+ {USB_DEVICE(LINE6_VENDOR_ID, LINE6_DEVID_PODSTUDIO_UX2)},
+ {USB_DEVICE(LINE6_VENDOR_ID, LINE6_DEVID_PODX3)},
+ {USB_DEVICE(LINE6_VENDOR_ID, LINE6_DEVID_PODX3LIVE)},
+ {USB_DEVICE(LINE6_VENDOR_ID, LINE6_DEVID_PODXT)},
+ {USB_DEVICE(LINE6_VENDOR_ID, LINE6_DEVID_PODXTLIVE)},
+ {USB_DEVICE(LINE6_VENDOR_ID, LINE6_DEVID_PODXTPRO)},
+ {USB_DEVICE(LINE6_VENDOR_ID, LINE6_DEVID_TONEPORT_GX)},
+ {USB_DEVICE(LINE6_VENDOR_ID, LINE6_DEVID_TONEPORT_UX1)},
+ {USB_DEVICE(LINE6_VENDOR_ID, LINE6_DEVID_TONEPORT_UX2)},
+ {USB_DEVICE(LINE6_VENDOR_ID, LINE6_DEVID_VARIAX)},
+ {},
};
+
MODULE_DEVICE_TABLE(usb, line6_id_table);
+/* *INDENT-OFF* */
static struct line6_properties line6_properties_table[] = {
{ "BassPODxt", "BassPODxt", LINE6_BIT_BASSPODXT, LINE6_BIT_CONTROL_PCM_HWMON },
{ "BassPODxtLive", "BassPODxt Live", LINE6_BIT_BASSPODXTLIVE, LINE6_BIT_CONTROL_PCM_HWMON },
{ "TonePortUX2", "TonePort UX2", LINE6_BIT_TONEPORT_UX2, LINE6_BIT_PCM },
{ "Variax", "Variax Workbench", LINE6_BIT_VARIAX, LINE6_BIT_CONTROL }
};
-
+/* *INDENT-ON* */
/*
This is Line6's MIDI manufacturer ID.
*/
static const char *line6_request_version;
-
struct usb_line6 *line6_devices[LINE6_MAX_DEVICES];
-
/**
Class for asynchronous messages.
*/
int done;
};
-
/*
Forward declarations.
*/
static int line6_send_raw_message_async_part(struct message *msg,
struct urb *urb);
-
/*
Start to listen on endpoint.
*/
line6->buffer_listen, LINE6_BUFSIZE_LISTEN,
line6_data_received, line6, line6->interval);
line6->urb_listen->actual_length = 0;
- err = usb_submit_urb(line6->urb_listen, GFP_KERNEL);
+ err = usb_submit_urb(line6->urb_listen, GFP_ATOMIC);
return err;
}
if (j < n) {
unsigned char val = buffer[i + j];
bytes = snprintf(p, hexdumpsize, " %02X", val);
- asc[j] = ((val >= 0x20) && (val < 0x7f)) ? val : '.';
+ asc[j] = ((val >= 0x20)
+ && (val < 0x7f)) ? val : '.';
} else
bytes = snprintf(p, hexdumpsize, " ");
if (bytes > hexdumpsize)
- break; /* buffer overflow */
+ break; /* buffer overflow */
p += bytes;
hexdumpsize -= bytes;
Setup and start timer.
*/
void line6_start_timer(struct timer_list *timer, unsigned int msecs,
- void (*function)(unsigned long), unsigned long data)
+ void (*function) (unsigned long), unsigned long data)
{
setup_timer(timer, function, data);
timer->expires = jiffies + msecs * HZ / 1000;
*/
int line6_version_request_async(struct usb_line6 *line6)
{
- return line6_send_raw_message_async(line6, line6_request_version, sizeof(line6_request_version0));
+ return line6_send_raw_message_async(line6, line6_request_version,
+ sizeof(line6_request_version0));
}
/*
int line6_send_sysex_message(struct usb_line6 *line6, const char *buffer,
int size)
{
- return line6_send_raw_message(line6, buffer, size + SYSEX_EXTRA_SIZE) - SYSEX_EXTRA_SIZE;
+ return line6_send_raw_message(line6, buffer,
+ size + SYSEX_EXTRA_SIZE) -
+ SYSEX_EXTRA_SIZE;
}
/*
int line6_send_sysex_message_async(struct usb_line6 *line6, const char *buffer,
int size)
{
- return line6_send_raw_message_async(line6, buffer, size + SYSEX_EXTRA_SIZE) - SYSEX_EXTRA_SIZE;
+ return line6_send_raw_message_async(line6, buffer,
+ size + SYSEX_EXTRA_SIZE) -
+ SYSEX_EXTRA_SIZE;
}
/*
line6_dump_urb(urb);
#endif
- done = line6_midibuf_write(mb, urb->transfer_buffer, urb->actual_length);
+ done =
+ line6_midibuf_write(mb, urb->transfer_buffer, urb->actual_length);
if (done < urb->actual_length) {
line6_midibuf_ignore(mb, done);
- DEBUG_MESSAGES(dev_err(line6->ifcdev, "%d %d buffer overflow - message skipped\n", done, urb->actual_length));
+ DEBUG_MESSAGES(dev_err
+ (line6->ifcdev,
+ "%d %d buffer overflow - message skipped\n",
+ done, urb->actual_length));
}
for (;;) {
- done = line6_midibuf_read(mb, line6->buffer_message, LINE6_MESSAGE_MAXLEN);
+ done =
+ line6_midibuf_read(mb, line6->buffer_message,
+ LINE6_MESSAGE_MAXLEN);
if (done == 0)
break;
/* MIDI input filter */
- if (line6_midibuf_skip_message(mb, line6->line6midi->midi_mask_receive))
+ if (line6_midibuf_skip_message
+ (mb, line6->line6midi->midi_mask_receive))
continue;
line6->message_length = done;
case LINE6_DEVID_PODXT:
case LINE6_DEVID_PODXTPRO:
case LINE6_DEVID_POCKETPOD:
- line6_pod_process_message((struct usb_line6_pod *)line6);
+ line6_pod_process_message((struct usb_line6_pod *)
+ line6);
break;
case LINE6_DEVID_PODXTLIVE:
switch (line6->interface_number) {
case PODXTLIVE_INTERFACE_POD:
- line6_pod_process_message((struct usb_line6_pod *)line6);
+ line6_pod_process_message((struct usb_line6_pod
+ *)line6);
break;
case PODXTLIVE_INTERFACE_VARIAX:
- line6_variax_process_message((struct usb_line6_variax *)line6);
+ line6_variax_process_message((struct
+ usb_line6_variax
+ *)line6);
break;
default:
- dev_err(line6->ifcdev, "PODxt Live interface %d not supported\n", line6->interface_number);
+ dev_err(line6->ifcdev,
+ "PODxt Live interface %d not supported\n",
+ line6->interface_number);
}
break;
case LINE6_DEVID_VARIAX:
- line6_variax_process_message((struct usb_line6_variax *)line6);
+ line6_variax_process_message((struct usb_line6_variax *)
+ line6);
break;
default:
buffer, 2, &partial, LINE6_TIMEOUT * HZ);
if (retval)
- dev_err(line6->ifcdev, "usb_interrupt_msg failed (%d)\n", retval);
+ dev_err(line6->ifcdev, "usb_interrupt_msg failed (%d)\n",
+ retval);
kfree(buffer);
return retval;
#endif
retval = usb_interrupt_msg(line6->usbdev,
- usb_sndintpipe(line6->usbdev, line6->ep_control_write),
+ usb_sndintpipe(line6->usbdev,
+ line6->ep_control_write),
buffer, 3, &partial, LINE6_TIMEOUT * HZ);
if (retval)
- dev_err(line6->ifcdev, "usb_interrupt_msg failed (%d)\n", retval);
+ dev_err(line6->ifcdev, "usb_interrupt_msg failed (%d)\n",
+ retval);
kfree(buffer);
return retval;
/*
Read data from device.
*/
-int line6_read_data(struct usb_line6 *line6, int address, void *data, size_t datalen)
+int line6_read_data(struct usb_line6 *line6, int address, void *data,
+ size_t datalen)
{
struct usb_device *usbdev = line6->usbdev;
int ret;
return ret;
}
}
- while (status == 0xff)
- ;
+ while (status == 0xff);
if (status != 0) {
dev_err(line6->ifcdev, "write failed (error %d)\n", ret);
*/
int line6_read_serial_number(struct usb_line6 *line6, int *serial_number)
{
- return line6_read_data(line6, 0x80d0, serial_number, sizeof(*serial_number));
+ return line6_read_data(line6, 0x80d0, serial_number,
+ sizeof(*serial_number));
}
/*
/*
No operation (i.e., unsupported).
*/
-ssize_t line6_nop_write(struct device *dev, struct device_attribute *attr,
+ssize_t line6_nop_write(struct device * dev, struct device_attribute * attr,
const char *buf, size_t count)
{
return count;
"write" request on "raw" special file.
*/
#ifdef CONFIG_LINE6_USB_RAW
-ssize_t line6_set_raw(struct device *dev, struct device_attribute *attr,
+ssize_t line6_set_raw(struct device * dev, struct device_attribute * attr,
const char *buf, size_t count)
{
struct usb_interface *interface = to_usb_interface(dev);
/*
Probe USB device.
*/
-static int line6_probe(struct usb_interface *interface, const struct usb_device_id *id)
+static int line6_probe(struct usb_interface *interface,
+ const struct usb_device_id *id)
{
int devtype;
struct usb_device *usbdev = NULL;
case LINE6_DEVID_POCKETPOD:
switch (interface_number) {
case 0:
- return 0; /* this interface has no endpoints */
+ return 0; /* this interface has no endpoints */
case 1:
alternate = 0;
break;
case LINE6_DEVID_PODSTUDIO_UX1:
case LINE6_DEVID_TONEPORT_GX:
case LINE6_DEVID_TONEPORT_UX1:
- alternate = 2; /* 1..4 seem to be ok */
+ alternate = 2; /* 1..4 seem to be ok */
break;
case LINE6_DEVID_TONEPORT_UX2:
break;
case 1:
/* don't know yet what this is ...
- alternate = 1;
- break;
- */
+ alternate = 1;
+ break;
+ */
return -ENODEV;
default:
MISSING_CASE;
case LINE6_DEVID_PODXT:
case LINE6_DEVID_PODXTPRO:
size = sizeof(struct usb_line6_pod);
- ep_read = 0x84;
+ ep_read = 0x84;
ep_write = 0x03;
break;
case LINE6_DEVID_POCKETPOD:
size = sizeof(struct usb_line6_pod);
- ep_read = 0x82;
+ ep_read = 0x82;
ep_write = 0x02;
break;
case LINE6_DEVID_PODX3LIVE:
/* currently unused! */
size = sizeof(struct usb_line6_pod);
- ep_read = 0x81;
+ ep_read = 0x81;
ep_write = 0x01;
break;
switch (interface_number) {
case PODXTLIVE_INTERFACE_POD:
size = sizeof(struct usb_line6_pod);
- ep_read = 0x84;
+ ep_read = 0x84;
ep_write = 0x03;
break;
case PODXTLIVE_INTERFACE_VARIAX:
size = sizeof(struct usb_line6_variax);
- ep_read = 0x86;
+ ep_read = 0x86;
ep_write = 0x05;
break;
case LINE6_DEVID_VARIAX:
size = sizeof(struct usb_line6_variax);
- ep_read = 0x82;
+ ep_read = 0x82;
ep_write = 0x01;
break;
}
if (size == 0) {
- dev_err(line6->ifcdev, "driver bug: interface data size not set\n");
+ dev_err(line6->ifcdev,
+ "driver bug: interface data size not set\n");
ret = -ENODEV;
goto err_put;
}
/* get data from endpoint descriptor (see usb_maxpacket): */
{
struct usb_host_endpoint *ep;
- unsigned epnum = usb_pipeendpoint(usb_rcvintpipe(usbdev, ep_read));
+ unsigned epnum =
+ usb_pipeendpoint(usb_rcvintpipe(usbdev, ep_read));
ep = usbdev->ep_in[epnum];
if (ep != NULL) {
line6->interval = ep->desc.bInterval;
- line6->max_packet_size = le16_to_cpu(ep->desc.wMaxPacketSize);
+ line6->max_packet_size =
+ le16_to_cpu(ep->desc.wMaxPacketSize);
} else {
line6->interval = LINE6_FALLBACK_INTERVAL;
line6->max_packet_size = LINE6_FALLBACK_MAXPACKETSIZE;
- dev_err(line6->ifcdev, "endpoint not available, using fallback values");
+ dev_err(line6->ifcdev,
+ "endpoint not available, using fallback values");
}
}
if (properties->capabilities & LINE6_BIT_CONTROL) {
/* initialize USB buffers: */
- line6->buffer_listen = kmalloc(LINE6_BUFSIZE_LISTEN, GFP_KERNEL);
+ line6->buffer_listen =
+ kmalloc(LINE6_BUFSIZE_LISTEN, GFP_KERNEL);
if (line6->buffer_listen == NULL) {
dev_err(&interface->dev, "Out of memory\n");
goto err_destruct;
}
- line6->buffer_message = kmalloc(LINE6_MESSAGE_MAXLEN, GFP_KERNEL);
+ line6->buffer_message =
+ kmalloc(LINE6_MESSAGE_MAXLEN, GFP_KERNEL);
if (line6->buffer_message == NULL) {
dev_err(&interface->dev, "Out of memory\n");
case LINE6_DEVID_PODXTLIVE:
switch (interface_number) {
case PODXTLIVE_INTERFACE_POD:
- ret = line6_pod_init(interface, (struct usb_line6_pod *)line6);
+ ret =
+ line6_pod_init(interface,
+ (struct usb_line6_pod *)line6);
break;
case PODXTLIVE_INTERFACE_VARIAX:
- ret = line6_variax_init(interface, (struct usb_line6_variax *)line6);
+ ret =
+ line6_variax_init(interface,
+ (struct usb_line6_variax *)line6);
break;
default:
break;
case LINE6_DEVID_VARIAX:
- ret = line6_variax_init(interface, (struct usb_line6_variax *)line6);
+ ret =
+ line6_variax_init(interface,
+ (struct usb_line6_variax *)line6);
break;
case LINE6_DEVID_PODSTUDIO_GX:
case LINE6_DEVID_TONEPORT_UX1:
case LINE6_DEVID_TONEPORT_UX2:
case LINE6_DEVID_GUITARPORT:
- ret = line6_toneport_init(interface, (struct usb_line6_toneport *)line6);
+ ret =
+ line6_toneport_init(interface,
+ (struct usb_line6_toneport *)line6);
break;
default:
line6->properties->name);
line6_devices[devnum] = line6;
- switch(product) {
+ switch (product) {
case LINE6_DEVID_PODX3:
case LINE6_DEVID_PODX3LIVE:
- dev_info(&interface->dev, "NOTE: the Line6 %s is detected, but not yet supported\n",
+ dev_info(&interface->dev,
+ "NOTE: the Line6 %s is detected, but not yet supported\n",
line6->properties->name);
}
MISSING_CASE;
}
- dev_info(&interface->dev, "Line6 %s now disconnected\n", line6->properties->name);
+ dev_info(&interface->dev, "Line6 %s now disconnected\n",
+ line6->properties->name);
for (i = LINE6_MAX_DEVICES; i--;)
if (line6_devices[i] == line6)
return line6_resume(interface);
}
-#endif /* CONFIG_PM */
+#endif /* CONFIG_PM */
static struct usb_driver line6_driver = {
.name = DRIVER_NAME,
{
int i, retval;
- printk(KERN_INFO "%s driver version %s%s\n",
- DRIVER_NAME, DRIVER_VERSION, DRIVER_REVISION);
+ printk(KERN_INFO "%s driver version %s\n", DRIVER_NAME, DRIVER_VERSION);
for (i = LINE6_MAX_DEVICES; i--;)
line6_devices[i] = NULL;
*/
static void __exit line6_exit(void)
{
- kfree(line6_request_version);
+ int i;
+ struct usb_line6 *line6;
+ struct snd_line6_pcm *line6pcm;
+
+ /* stop all PCM channels */
+ for (i = LINE6_MAX_DEVICES; i--;) {
+ line6 = line6_devices[i];
+
+ if (line6 == NULL)
+ continue;
+
+ line6pcm = line6->line6pcm;
+
+ if (line6pcm == NULL)
+ continue;
+
+ line6_pcm_stop(line6pcm, ~0);
+ }
+
usb_deregister(&line6_driver);
+ kfree(line6_request_version);
}
module_init(line6_init);
/*
- * Line6 Linux USB driver - 0.9.0
+ * Line6 Linux USB driver - 0.9.1beta
*
* Copyright (C) 2004-2010 Markus Grabner (grabner@icg.tugraz.at)
*
#ifndef DRIVER_H
#define DRIVER_H
-
#include <linux/spinlock.h>
#include <linux/usb.h>
#include <sound/core.h>
#include "midi.h"
-
#define DRIVER_NAME "line6usb"
#if defined(CONFIG_LINE6_USB_DUMP_CTRL) || defined(CONFIG_LINE6_USB_DUMP_MIDI) || defined(CONFIG_LINE6_USB_DUMP_PCM)
*/
#define LINE6_CHANNEL_DEVICE 0x02
-#define LINE6_CHANNEL_UNKNOWN 5 /* don't know yet what this is good for */
+#define LINE6_CHANNEL_UNKNOWN 5 /* don't know yet what this is good for */
#define LINE6_CHANNEL_MASK 0x0f
#define DEBUG_MESSAGES(x)
#endif
-
#define MISSING_CASE \
printk(KERN_ERR "line6usb driver bug: missing case in %s:%d\n", \
__FILE__, __LINE__)
-
#define CHECK_RETURN(x) \
do { \
err = x; \
return; \
x = (n);
-
extern const unsigned char line6_midi_id[3];
extern struct usb_line6 *line6_devices[LINE6_MAX_DEVICES];
static const int SYSEX_DATA_OFS = sizeof(line6_midi_id) + 3;
static const int SYSEX_EXTRA_SIZE = sizeof(line6_midi_id) + 4;
-
/**
Common properties of Line6 devices.
*/
int message_length;
};
-
extern char *line6_alloc_sysex_buffer(struct usb_line6 *line6, int code1,
int code2, int size);
extern ssize_t line6_nop_read(struct device *dev,
extern ssize_t line6_set_raw(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count);
extern void line6_start_timer(struct timer_list *timer, unsigned int msecs,
- void (*function)(unsigned long), unsigned long data);
+ void (*function) (unsigned long),
+ unsigned long data);
extern int line6_transmit_parameter(struct usb_line6 *line6, int param,
int value);
extern int line6_version_request_async(struct usb_line6 *line6);
const unsigned char *buffer, int size);
#endif
-
#endif
/*
- * Line6 Linux USB driver - 0.9.0
+ * Line6 Linux USB driver - 0.9.1beta
*
* Copyright (C) 2004-2010 Markus Grabner (grabner@icg.tugraz.at)
*
#include "driver.h"
#include "dumprequest.h"
-
/*
Set "dump in progress" flag.
*/
*/
int line6_dump_wait_interruptible(struct line6_dump_request *l6dr)
{
- return wait_event_interruptible(l6dr->wait, l6dr->in_progress == LINE6_DUMP_NONE);
+ return wait_event_interruptible(l6dr->wait,
+ l6dr->in_progress == LINE6_DUMP_NONE);
}
/*
*/
int line6_dump_wait_timeout(struct line6_dump_request *l6dr, long timeout)
{
- return wait_event_timeout(l6dr->wait, l6dr->in_progress == LINE6_DUMP_NONE, timeout);
+ return wait_event_timeout(l6dr->wait,
+ l6dr->in_progress == LINE6_DUMP_NONE,
+ timeout);
}
/*
/*
- * Line6 Linux USB driver - 0.9.0
+ * Line6 Linux USB driver - 0.9.1beta
*
* Copyright (C) 2004-2010 Markus Grabner (grabner@icg.tugraz.at)
*
#ifndef DUMPREQUEST_H
#define DUMPREQUEST_H
-
#include <linux/usb.h>
#include <linux/wait.h>
#include <sound/core.h>
-
enum {
LINE6_DUMP_NONE,
LINE6_DUMP_CURRENT
};
-
struct line6_dump_reqbuf {
/**
Buffer for dump requests.
extern int line6_dump_wait_timeout(struct line6_dump_request *l6dr,
long timeout);
-
#endif
/*
- * Line6 Linux USB driver - 0.9.0
+ * Line6 Linux USB driver - 0.9.1beta
*
* Copyright (C) 2004-2010 Markus Grabner (grabner@icg.tugraz.at)
*
#include "pod.h"
#include "usbdefs.h"
-
#define line6_rawmidi_substream_midi(substream) \
((struct snd_line6_midi *)((substream)->rmidi->private_data))
-
static int send_midi_async(struct usb_line6 *line6, unsigned char *data,
int length);
-
/*
Pass data received via USB to MIDI.
*/
*/
static void line6_midi_transmit(struct snd_rawmidi_substream *substream)
{
- struct usb_line6 *line6 = line6_rawmidi_substream_midi(substream)->line6;
+ struct usb_line6 *line6 =
+ line6_rawmidi_substream_midi(substream)->line6;
struct snd_line6_midi *line6midi = line6->line6midi;
struct MidiBuffer *mb = &line6midi->midibuf_out;
unsigned long flags;
if (done == 0)
break;
- if (line6_midibuf_skip_message(mb, line6midi->midi_mask_transmit))
+ if (line6_midibuf_skip_message
+ (mb, line6midi->midi_mask_transmit))
continue;
send_midi_async(line6, chunk, done);
dev_err(line6->ifcdev, "Out of memory\n");
return -ENOMEM;
}
-
#ifdef CONFIG_LINE6_USB_DUMP_CTRL
line6_write_hexdump(line6, 'S', data, length);
#endif
length);
break;
+ case LINE6_DEVID_VARIAX:
+ break;
+
default:
MISSING_CASE;
}
int up)
{
unsigned long flags;
- struct usb_line6 *line6 = line6_rawmidi_substream_midi(substream)->line6;
+ struct usb_line6 *line6 =
+ line6_rawmidi_substream_midi(substream)->line6;
line6->line6midi->substream_transmit = substream;
spin_lock_irqsave(&line6->line6midi->send_urb_lock, flags);
static void line6_midi_output_drain(struct snd_rawmidi_substream *substream)
{
- struct usb_line6 *line6 = line6_rawmidi_substream_midi(substream)->line6;
+ struct usb_line6 *line6 =
+ line6_rawmidi_substream_midi(substream)->line6;
struct snd_line6_midi *midi = line6->line6midi;
- wait_event_interruptible(midi->send_wait, midi->num_active_send_urbs == 0);
+ wait_event_interruptible(midi->send_wait,
+ midi->num_active_send_urbs == 0);
}
static int line6_midi_input_open(struct snd_rawmidi_substream *substream)
static void line6_midi_input_trigger(struct snd_rawmidi_substream *substream,
int up)
{
- struct usb_line6 *line6 = line6_rawmidi_substream_midi(substream)->line6;
+ struct usb_line6 *line6 =
+ line6_rawmidi_substream_midi(substream)->line6;
if (up)
line6->line6midi->substream_receive = substream;
strcpy(rmidi->name, line6midi->line6->properties->name);
rmidi->info_flags =
- SNDRV_RAWMIDI_INFO_OUTPUT |
- SNDRV_RAWMIDI_INFO_INPUT |
- SNDRV_RAWMIDI_INFO_DUPLEX;
+ SNDRV_RAWMIDI_INFO_OUTPUT |
+ SNDRV_RAWMIDI_INFO_INPUT | SNDRV_RAWMIDI_INFO_DUPLEX;
snd_rawmidi_set_ops(rmidi, SNDRV_RAWMIDI_STREAM_OUTPUT,
&line6_midi_output_ops);
return count;
}
-static DEVICE_ATTR(midi_mask_transmit, S_IWUGO | S_IRUGO, midi_get_midi_mask_transmit, midi_set_midi_mask_transmit);
-static DEVICE_ATTR(midi_mask_receive, S_IWUGO | S_IRUGO, midi_get_midi_mask_receive, midi_set_midi_mask_receive);
+static DEVICE_ATTR(midi_mask_transmit, S_IWUGO | S_IRUGO,
+ midi_get_midi_mask_transmit, midi_set_midi_mask_transmit);
+static DEVICE_ATTR(midi_mask_receive, S_IWUGO | S_IRUGO,
+ midi_get_midi_mask_receive, midi_set_midi_mask_receive);
/* MIDI device destructor */
static int snd_line6_midi_free(struct snd_device *device)
{
struct snd_line6_midi *line6midi = device->device_data;
- device_remove_file(line6midi->line6->ifcdev, &dev_attr_midi_mask_transmit);
- device_remove_file(line6midi->line6->ifcdev, &dev_attr_midi_mask_receive);
+ device_remove_file(line6midi->line6->ifcdev,
+ &dev_attr_midi_mask_transmit);
+ device_remove_file(line6midi->line6->ifcdev,
+ &dev_attr_midi_mask_receive);
line6_midibuf_destroy(&line6midi->midibuf_in);
line6_midibuf_destroy(&line6midi->midibuf_out);
return 0;
struct snd_line6_midi *line6midi;
if (!(line6->properties->capabilities & LINE6_BIT_CONTROL))
- return 0; /* skip MIDI initialization and report success */
+ return 0; /* skip MIDI initialization and report success */
line6midi = kzalloc(sizeof(struct snd_line6_midi), GFP_KERNEL);
/*
- * Line6 Linux USB driver - 0.9.0
+ * Line6 Linux USB driver - 0.9.1beta
*
* Copyright (C) 2004-2010 Markus Grabner (grabner@icg.tugraz.at)
*
#ifndef MIDI_H
#define MIDI_H
-
#include <sound/rawmidi.h>
#include "midibuf.h"
-
#define MIDI_BUFFER_SIZE 1024
-
struct snd_line6_midi {
/**
Pointer back to the Line6 driver data structure.
struct MidiBuffer midibuf_out;
};
-
extern int line6_init_midi(struct usb_line6 *line6);
extern void line6_midi_receive(struct usb_line6 *line6, unsigned char *data,
int length);
-
#endif
/*
- * Line6 Linux USB driver - 0.9.0
+ * Line6 Linux USB driver - 0.9.1beta
*
* Copyright (C) 2004-2010 Markus Grabner (grabner@icg.tugraz.at)
*
#include "midibuf.h"
-
static int midibuf_message_length(unsigned char code)
{
if (code < 0x80)
return length[(code >> 4) - 8];
} else {
/*
- Note that according to the MIDI specification 0xf2 is
- the "Song Position Pointer", but this is used by Line6
- to send sysex messages to the host.
- */
+ Note that according to the MIDI specification 0xf2 is
+ the "Song Position Pointer", but this is used by Line6
+ to send sysex messages to the host.
+ */
static const int length[] = { -1, 2, -1, 2, -1, -1, 1, 1, 1, 1,
- 1, 1, 1, -1, 1, 1 };
+ 1, 1, 1, -1, 1, 1
+ };
return length[code & 0x0f];
}
}
int line6_midibuf_bytes_free(struct MidiBuffer *this)
{
return
- midibuf_is_full(this) ?
- 0 :
- (this->pos_read - this->pos_write + this->size - 1) % this->size + 1;
+ midibuf_is_full(this) ?
+ 0 :
+ (this->pos_read - this->pos_write + this->size - 1) % this->size +
+ 1;
}
int line6_midibuf_bytes_used(struct MidiBuffer *this)
{
return
- midibuf_is_empty(this) ?
- 0 :
- (this->pos_write - this->pos_read + this->size - 1) % this->size + 1;
+ midibuf_is_empty(this) ?
+ 0 :
+ (this->pos_write - this->pos_read + this->size - 1) % this->size +
+ 1;
}
-int line6_midibuf_write(struct MidiBuffer *this, unsigned char *data, int length)
+int line6_midibuf_write(struct MidiBuffer *this, unsigned char *data,
+ int length)
{
int bytes_free;
int length1, length2;
this->command_prev = command;
} else {
if (this->command_prev > 0) {
- int midi_length_prev = midibuf_message_length(this->command_prev);
+ int midi_length_prev =
+ midibuf_message_length(this->command_prev);
if (midi_length_prev > 0) {
midi_length = midi_length_prev - 1;
}
if (midi_length == length)
- midi_length = -1; /* end of message not found */
+ midi_length = -1; /* end of message not found */
}
if (midi_length < 0) {
if (!this->split)
- return 0; /* command is not yet complete */
+ return 0; /* command is not yet complete */
} else {
if (length < midi_length)
- return 0; /* command is not yet complete */
+ return 0; /* command is not yet complete */
length = midi_length;
}
/*
- * Line6 Linux USB driver - 0.9.0
+ * Line6 Linux USB driver - 0.9.1beta
*
* Copyright (C) 2004-2010 Markus Grabner (grabner@icg.tugraz.at)
*
#ifndef MIDIBUF_H
#define MIDIBUF_H
-
struct MidiBuffer {
unsigned char *buf;
int size;
int command_prev;
};
-
extern int line6_midibuf_bytes_used(struct MidiBuffer *mb);
extern int line6_midibuf_bytes_free(struct MidiBuffer *mb);
extern void line6_midibuf_destroy(struct MidiBuffer *mb);
extern int line6_midibuf_ignore(struct MidiBuffer *mb, int length);
extern int line6_midibuf_init(struct MidiBuffer *mb, int size, int split);
-extern int line6_midibuf_read(struct MidiBuffer *mb, unsigned char *data, int length);
+extern int line6_midibuf_read(struct MidiBuffer *mb, unsigned char *data,
+ int length);
extern void line6_midibuf_reset(struct MidiBuffer *mb);
-extern int line6_midibuf_skip_message(struct MidiBuffer *mb, unsigned short mask);
+extern int line6_midibuf_skip_message(struct MidiBuffer *mb,
+ unsigned short mask);
extern void line6_midibuf_status(struct MidiBuffer *mb);
extern int line6_midibuf_write(struct MidiBuffer *mb, unsigned char *data,
int length);
-
#endif
/*
- * Line6 Linux USB driver - 0.9.0
+ * Line6 Linux USB driver - 0.9.1beta
*
* Copyright (C) 2004-2010 Markus Grabner (grabner@icg.tugraz.at)
*
#include "playback.h"
#include "pod.h"
-
#ifdef CONFIG_LINE6_USB_IMPULSE_RESPONSE
-static struct snd_line6_pcm* dev2pcm(struct device *dev)
+static struct snd_line6_pcm *dev2pcm(struct device *dev)
{
struct usb_interface *interface = to_usb_interface(dev);
struct usb_line6 *line6 = usb_get_intfdata(interface);
"read" request on "impulse_volume" special file.
*/
static ssize_t pcm_get_impulse_volume(struct device *dev,
- struct device_attribute *attr,
- char *buf)
+ struct device_attribute *attr, char *buf)
{
return sprintf(buf, "%d\n", dev2pcm(dev)->impulse_volume);
}
int value = simple_strtoul(buf, NULL, 10);
line6pcm->impulse_volume = value;
- if(value > 0)
+ if (value > 0)
line6_pcm_start(line6pcm, MASK_PCM_IMPULSE);
else
line6_pcm_stop(line6pcm, MASK_PCM_IMPULSE);
"read" request on "impulse_period" special file.
*/
static ssize_t pcm_get_impulse_period(struct device *dev,
- struct device_attribute *attr,
- char *buf)
+ struct device_attribute *attr, char *buf)
{
return sprintf(buf, "%d\n", dev2pcm(dev)->impulse_period);
}
return count;
}
-static DEVICE_ATTR(impulse_volume, S_IWUGO | S_IRUGO, pcm_get_impulse_volume, pcm_set_impulse_volume);
-static DEVICE_ATTR(impulse_period, S_IWUGO | S_IRUGO, pcm_get_impulse_period, pcm_set_impulse_period);
+static DEVICE_ATTR(impulse_volume, S_IWUGO | S_IRUGO, pcm_get_impulse_volume,
+ pcm_set_impulse_volume);
+static DEVICE_ATTR(impulse_period, S_IWUGO | S_IRUGO, pcm_get_impulse_period,
+ pcm_set_impulse_period);
#endif
int line6_pcm_start(struct snd_line6_pcm *line6pcm, int channels)
{
- unsigned long flags_old = __sync_fetch_and_or(&line6pcm->flags, channels);
+ unsigned long flags_old =
+ __sync_fetch_and_or(&line6pcm->flags, channels);
unsigned long flags_new = flags_old | channels;
int err = 0;
#if LINE6_BACKUP_MONITOR_SIGNAL
if (!(line6pcm->line6->properties->capabilities & LINE6_BIT_HWMON)) {
- line6pcm->prev_fbuf = kmalloc(LINE6_ISO_PACKETS * line6pcm->max_packet_size, GFP_KERNEL);
+ line6pcm->prev_fbuf =
+ kmalloc(LINE6_ISO_PACKETS * line6pcm->max_packet_size,
+ GFP_KERNEL);
if (!line6pcm->prev_fbuf) {
- dev_err(line6pcm->line6->ifcdev, "cannot malloc monitor buffer\n");
+ dev_err(line6pcm->line6->ifcdev,
+ "cannot malloc monitor buffer\n");
return -ENOMEM;
}
}
#else
line6pcm->prev_fbuf = NULL;
#endif
-
+
if (((flags_old & MASK_CAPTURE) == 0) &&
((flags_new & MASK_CAPTURE) != 0)) {
/*
- Waiting for completion of active URBs in the stop handler is
- a bug, we therefore report an error if capturing is restarted
- too soon.
- */
- if(line6pcm->active_urb_in | line6pcm->unlink_urb_in)
+ Waiting for completion of active URBs in the stop handler is
+ a bug, we therefore report an error if capturing is restarted
+ too soon.
+ */
+ if (line6pcm->active_urb_in | line6pcm->unlink_urb_in)
return -EBUSY;
- line6pcm->buffer_in = kmalloc(LINE6_ISO_BUFFERS * LINE6_ISO_PACKETS * line6pcm->max_packet_size, GFP_KERNEL);
+ line6pcm->buffer_in =
+ kmalloc(LINE6_ISO_BUFFERS * LINE6_ISO_PACKETS *
+ line6pcm->max_packet_size, GFP_KERNEL);
if (!line6pcm->buffer_in) {
- dev_err(line6pcm->line6->ifcdev, "cannot malloc capture buffer\n");
+ dev_err(line6pcm->line6->ifcdev,
+ "cannot malloc capture buffer\n");
return -ENOMEM;
}
line6pcm->count_in = 0;
line6pcm->prev_fsize = 0;
err = line6_submit_audio_in_all_urbs(line6pcm);
-
+
if (err < 0) {
__sync_fetch_and_and(&line6pcm->flags, ~channels);
return err;
}
}
-
+
if (((flags_old & MASK_PLAYBACK) == 0) &&
((flags_new & MASK_PLAYBACK) != 0)) {
/*
- See comment above regarding PCM restart.
- */
- if(line6pcm->active_urb_out | line6pcm->unlink_urb_out)
+ See comment above regarding PCM restart.
+ */
+ if (line6pcm->active_urb_out | line6pcm->unlink_urb_out)
return -EBUSY;
- line6pcm->buffer_out = kmalloc(LINE6_ISO_BUFFERS * LINE6_ISO_PACKETS * line6pcm->max_packet_size, GFP_KERNEL);
+ line6pcm->buffer_out =
+ kmalloc(LINE6_ISO_BUFFERS * LINE6_ISO_PACKETS *
+ line6pcm->max_packet_size, GFP_KERNEL);
if (!line6pcm->buffer_out) {
- dev_err(line6pcm->line6->ifcdev, "cannot malloc playback buffer\n");
+ dev_err(line6pcm->line6->ifcdev,
+ "cannot malloc playback buffer\n");
return -ENOMEM;
}
line6pcm->count_out = 0;
err = line6_submit_audio_out_all_urbs(line6pcm);
-
+
if (err < 0) {
__sync_fetch_and_and(&line6pcm->flags, ~channels);
return err;
}
}
-
+
return 0;
}
int line6_pcm_stop(struct snd_line6_pcm *line6pcm, int channels)
{
- unsigned long flags_old = __sync_fetch_and_and(&line6pcm->flags, ~channels);
+ unsigned long flags_old =
+ __sync_fetch_and_and(&line6pcm->flags, ~channels);
unsigned long flags_new = flags_old & ~channels;
if (((flags_old & MASK_CAPTURE) != 0) &&
kfree(line6pcm->buffer_out);
line6pcm->buffer_out = NULL;
}
-
#if LINE6_BACKUP_MONITOR_SIGNAL
if (line6pcm->prev_fbuf != NULL)
kfree(line6pcm->prev_fbuf);
break;
default:
- dev_err(line6pcm->line6->ifcdev, "Unknown stream direction %d\n",
- s->stream);
+ dev_err(line6pcm->line6->ifcdev,
+ "Unknown stream direction %d\n", s->stream);
}
}
struct snd_line6_pcm *line6pcm = snd_kcontrol_chip(kcontrol);
for (i = 2; i--;)
- if (line6pcm->volume_playback[i] != ucontrol->value.integer.value[i]) {
- line6pcm->volume_playback[i] = ucontrol->value.integer.value[i];
+ if (line6pcm->volume_playback[i] !=
+ ucontrol->value.integer.value[i]) {
+ line6pcm->volume_playback[i] =
+ ucontrol->value.integer.value[i];
changed = 1;
}
int err;
err = snd_pcm_new(line6pcm->line6->card,
- (char *)line6pcm->line6->properties->name,
- 0, 1, 1, &pcm);
+ (char *)line6pcm->line6->properties->name,
+ 0, 1, 1, &pcm);
if (err < 0)
return err;
/* set operators */
snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK,
&snd_line6_playback_ops);
- snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_CAPTURE,
- &snd_line6_capture_ops);
+ snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_CAPTURE, &snd_line6_capture_ops);
/* pre-allocation of buffers */
snd_pcm_lib_preallocate_pages_for_all(pcm, SNDRV_DMA_TYPE_CONTINUOUS,
- snd_dma_continuous_data(GFP_KERNEL),
- 64 * 1024, 128 * 1024);
+ snd_dma_continuous_data
+ (GFP_KERNEL), 64 * 1024,
+ 128 * 1024);
return 0;
}
*/
static void pcm_disconnect_substream(struct snd_pcm_substream *substream)
{
- if(substream->runtime && snd_pcm_running(substream)) {
+ if (substream->runtime && snd_pcm_running(substream)) {
snd_pcm_stop(substream, SNDRV_PCM_STATE_DISCONNECTED);
}
}
*/
void line6_pcm_disconnect(struct snd_line6_pcm *line6pcm)
{
- pcm_disconnect_substream(get_substream(line6pcm, SNDRV_PCM_STREAM_CAPTURE));
- pcm_disconnect_substream(get_substream(line6pcm, SNDRV_PCM_STREAM_PLAYBACK));
+ pcm_disconnect_substream(get_substream
+ (line6pcm, SNDRV_PCM_STREAM_CAPTURE));
+ pcm_disconnect_substream(get_substream
+ (line6pcm, SNDRV_PCM_STREAM_PLAYBACK));
line6_unlink_wait_clear_audio_out_urbs(line6pcm);
line6_unlink_wait_clear_audio_in_urbs(line6pcm);
}
struct snd_line6_pcm *line6pcm;
if (!(line6->properties->capabilities & LINE6_BIT_PCM))
- return 0; /* skip PCM initialization and report success */
+ return 0; /* skip PCM initialization and report success */
/* initialize PCM subsystem based on product id: */
switch (line6->product) {
case LINE6_DEVID_PODXT:
case LINE6_DEVID_PODXTLIVE:
case LINE6_DEVID_PODXTPRO:
- ep_read = 0x82;
+ ep_read = 0x82;
ep_write = 0x01;
break;
case LINE6_DEVID_PODX3:
case LINE6_DEVID_PODX3LIVE:
- ep_read = 0x86;
+ ep_read = 0x86;
ep_write = 0x02;
break;
case LINE6_DEVID_POCKETPOD:
- ep_read = 0x82;
+ ep_read = 0x82;
ep_write = 0x02;
break;
case LINE6_DEVID_TONEPORT_GX:
case LINE6_DEVID_TONEPORT_UX1:
case LINE6_DEVID_TONEPORT_UX2:
- ep_read = 0x82;
+ ep_read = 0x82;
ep_write = 0x01;
break;
/* this is for interface_number == 1:
- case LINE6_DEVID_TONEPORT_UX2:
- case LINE6_DEVID_PODSTUDIO_UX2:
- ep_read = 0x87;
- ep_write = 0x00;
- break;
- */
+ case LINE6_DEVID_TONEPORT_UX2:
+ case LINE6_DEVID_PODSTUDIO_UX2:
+ ep_read = 0x87;
+ ep_write = 0x00;
+ break;
+ */
default:
MISSING_CASE;
line6pcm->ep_audio_write = ep_write;
line6pcm->max_packet_size = usb_maxpacket(line6->usbdev,
usb_rcvintpipe(line6->usbdev,
- ep_read),
- 0);
+ ep_read), 0);
line6pcm->properties = properties;
line6->line6pcm = line6pcm;
return err;
/* mixer: */
- err = snd_ctl_add(line6->card, snd_ctl_new1(&line6_control_playback, line6pcm));
+ err =
+ snd_ctl_add(line6->card,
+ snd_ctl_new1(&line6_control_playback, line6pcm));
if (err < 0)
return err;
/*
- * Line6 Linux USB driver - 0.9.0
+ * Line6 Linux USB driver - 0.9.1beta
*
* Copyright (C) 2004-2010 Markus Grabner (grabner@icg.tugraz.at)
*
#ifndef PCM_H
#define PCM_H
-
#include <sound/pcm.h>
#include "driver.h"
#include "usbdefs.h"
-
/* number of URBs */
#define LINE6_ISO_BUFFERS 2
#define LINE6_BACKUP_MONITOR_SIGNAL 0
#define LINE6_REUSE_DMA_AREA_FOR_PLAYBACK 0
-
/*
Get substream from Line6 PCM data structure
*/
#define get_substream(line6pcm, stream) (line6pcm->pcm->streams[stream].substream)
-
/*
PCM mode bits and masks.
"ALSA": operations triggered by applications via ALSA
BIT_PREPARED,
/* individual masks: */
+/* *INDENT-OFF* */
MASK_PCM_ALSA_PLAYBACK = 1 << BIT_PCM_ALSA_PLAYBACK,
MASK_PCM_ALSA_CAPTURE = 1 << BIT_PCM_ALSA_CAPTURE,
MASK_PCM_MONITOR_PLAYBACK = 1 << BIT_PCM_MONITOR_PLAYBACK,
#endif
MASK_PAUSE_PLAYBACK = 1 << BIT_PAUSE_PLAYBACK,
MASK_PREPARED = 1 << BIT_PREPARED,
+/* *INDENT-ON* */
/* combined masks (by operation): */
- MASK_PCM_ALSA = MASK_PCM_ALSA_PLAYBACK | MASK_PCM_ALSA_CAPTURE,
+ MASK_PCM_ALSA = MASK_PCM_ALSA_PLAYBACK | MASK_PCM_ALSA_CAPTURE,
MASK_PCM_MONITOR = MASK_PCM_MONITOR_PLAYBACK | MASK_PCM_MONITOR_CAPTURE,
#ifdef CONFIG_LINE6_USB_IMPULSE_RESPONSE
MASK_PCM_IMPULSE = MASK_PCM_IMPULSE_PLAYBACK | MASK_PCM_IMPULSE_CAPTURE,
/* combined masks (by direction): */
#ifdef CONFIG_LINE6_USB_IMPULSE_RESPONSE
- MASK_PLAYBACK = MASK_PCM_ALSA_PLAYBACK | MASK_PCM_MONITOR_PLAYBACK | MASK_PCM_IMPULSE_PLAYBACK,
- MASK_CAPTURE = MASK_PCM_ALSA_CAPTURE | MASK_PCM_MONITOR_CAPTURE | MASK_PCM_IMPULSE_CAPTURE
+ MASK_PLAYBACK =
+ MASK_PCM_ALSA_PLAYBACK | MASK_PCM_MONITOR_PLAYBACK |
+ MASK_PCM_IMPULSE_PLAYBACK,
+ MASK_CAPTURE =
+ MASK_PCM_ALSA_CAPTURE | MASK_PCM_MONITOR_CAPTURE |
+ MASK_PCM_IMPULSE_CAPTURE
#else
MASK_PLAYBACK = MASK_PCM_ALSA_PLAYBACK | MASK_PCM_MONITOR_PLAYBACK,
- MASK_CAPTURE = MASK_PCM_ALSA_CAPTURE | MASK_PCM_MONITOR_CAPTURE
+ MASK_CAPTURE = MASK_PCM_ALSA_CAPTURE | MASK_PCM_MONITOR_CAPTURE
#endif
};
int last_frame_in, last_frame_out;
};
-
extern int line6_init_pcm(struct usb_line6 *line6,
struct line6_pcm_properties *properties);
extern int snd_line6_trigger(struct snd_pcm_substream *substream, int cmd);
extern int line6_pcm_start(struct snd_line6_pcm *line6pcm, int channels);
extern int line6_pcm_stop(struct snd_line6_pcm *line6pcm, int channels);
-
#define PRINT_FRAME_DIFF(op) { \
static int diff_prev = 1000; \
int diff = line6pcm->last_frame_out - line6pcm->last_frame_in; \
} \
}
-
#endif
/*
- * Line6 Linux USB driver - 0.9.0
+ * Line6 Linux USB driver - 0.9.1beta
*
* Copyright (C) 2004-2010 Markus Grabner (grabner@icg.tugraz.at)
*
int frames = urb_out->transfer_buffer_length / bytes_per_frame;
if (bytes_per_frame == 4) {
- /* TODO: add code for TonePort etc. */
+ int i;
+ short *pi = (short *)line6pcm->prev_fbuf;
+ short *po = (short *)urb_out->transfer_buffer;
+
+ for (i = 0; i < frames; ++i) {
+ po[0] = pi[0];
+ po[1] = 0;
+ pi += 2;
+ po += 2;
+ }
} else if (bytes_per_frame == 6) {
int i, j;
unsigned char *pi = line6pcm->prev_fbuf;
pi += bytes_per_frame;
po += bytes_per_frame;
}
-
- if (--line6pcm->impulse_count <= 0) {
- ((unsigned char *)(urb_out->
- transfer_buffer))[bytes_per_frame -
- 1] =
- line6pcm->impulse_volume;
- line6pcm->impulse_count = line6pcm->impulse_period;
- }
+ }
+ if (--line6pcm->impulse_count <= 0) {
+ ((unsigned char *)(urb_out->transfer_buffer))[bytes_per_frame -
+ 1] =
+ line6pcm->impulse_volume;
+ line6pcm->impulse_count = line6pcm->impulse_period;
}
}
}
/*
- We don't need to handle devices with 6 bytes per frame here
- since they all support hardware monitoring.
- */
+ We don't need to handle devices with 6 bytes per frame here
+ since they all support hardware monitoring.
+ */
}
/*
int index;
unsigned long flags;
int i, urb_size, urb_frames;
+ int ret;
const int bytes_per_frame = line6pcm->properties->bytes_per_frame;
const int frame_increment =
line6pcm->properties->snd_line6_rates.rats[0].num_min;
create_impulse_test_signal(line6pcm, urb_out,
bytes_per_frame);
if (line6pcm->flags & MASK_PCM_ALSA_CAPTURE) {
- line6_capture_copy(line6pcm, urb_out->transfer_buffer,
- urb_out->transfer_buffer_length);
+ line6_capture_copy(line6pcm,
+ urb_out->transfer_buffer,
+ urb_out->
+ transfer_buffer_length);
+ line6_capture_check_period(line6pcm,
+ urb_out->transfer_buffer_length);
}
} else {
#endif
if (!
- (line6pcm->line6->properties->
- capabilities & LINE6_BIT_HWMON)
- && (line6pcm->flags & MASK_PLAYBACK)
- && (line6pcm->flags & MASK_CAPTURE))
+ (line6pcm->line6->
+ properties->capabilities & LINE6_BIT_HWMON)
+&& (line6pcm->flags & MASK_PLAYBACK)
+&& (line6pcm->flags & MASK_CAPTURE))
add_monitor_signal(urb_out, line6pcm->prev_fbuf,
line6pcm->volume_monitor,
bytes_per_frame);
}
#endif
- if (usb_submit_urb(urb_out, GFP_ATOMIC) == 0)
+ ret = usb_submit_urb(urb_out, GFP_ATOMIC);
+
+ if (ret == 0)
set_bit(index, &line6pcm->active_urb_out);
else
dev_err(line6pcm->line6->ifcdev,
- "URB out #%d submission failed\n", index);
+ "URB out #%d submission failed (%d)\n", index, ret);
spin_unlock_irqrestore(&line6pcm->lock_audio_out, flags);
return 0;
int i, index, length = 0, shutdown = 0;
unsigned long flags;
- struct snd_line6_pcm *line6pcm =
- (struct snd_line6_pcm *)urb->context;
+ struct snd_line6_pcm *line6pcm = (struct snd_line6_pcm *)urb->context;
struct snd_pcm_substream *substream =
get_substream(line6pcm, SNDRV_PCM_STREAM_PLAYBACK);
clear_bit(index, &line6pcm->active_urb_out);
for (i = LINE6_ISO_PACKETS; i--;)
- if (urb->iso_frame_desc[i].status == -ESHUTDOWN) {
+ if (urb->iso_frame_desc[i].status == -EXDEV) {
shutdown = 1;
break;
}
struct snd_line6_pcm *line6pcm = snd_pcm_substream_chip(substream);
err = snd_pcm_hw_constraint_ratdens(runtime, 0, SNDRV_PCM_HW_PARAM_RATE,
- (&line6pcm->properties->
- snd_line6_rates));
+ (&line6pcm->
+ properties->snd_line6_rates));
if (err < 0)
return err;
/* playback operators */
struct snd_pcm_ops snd_line6_playback_ops = {
- .open = snd_line6_playback_open,
- .close = snd_line6_playback_close,
- .ioctl = snd_pcm_lib_ioctl,
- .hw_params = snd_line6_playback_hw_params,
- .hw_free = snd_line6_playback_hw_free,
- .prepare = snd_line6_prepare,
- .trigger = snd_line6_trigger,
- .pointer = snd_line6_playback_pointer,
+ .open = snd_line6_playback_open,
+ .close = snd_line6_playback_close,
+ .ioctl = snd_pcm_lib_ioctl,
+ .hw_params = snd_line6_playback_hw_params,
+ .hw_free = snd_line6_playback_hw_free,
+ .prepare = snd_line6_prepare,
+ .trigger = snd_line6_trigger,
+ .pointer = snd_line6_playback_pointer,
};
int line6_create_audio_out_urbs(struct snd_line6_pcm *line6pcm)
urb->dev = line6pcm->line6->usbdev;
urb->pipe =
usb_sndisocpipe(line6pcm->line6->usbdev,
- line6pcm->
- ep_audio_write & USB_ENDPOINT_NUMBER_MASK);
+ line6pcm->ep_audio_write &
+ USB_ENDPOINT_NUMBER_MASK);
urb->transfer_flags = URB_ISO_ASAP;
urb->start_frame = -1;
urb->number_of_packets = LINE6_ISO_PACKETS;
/*
- * Line6 Linux USB driver - 0.9.0
+ * Line6 Linux USB driver - 0.9.1beta
*
* Copyright (C) 2004-2010 Markus Grabner (grabner@icg.tugraz.at)
*
#ifndef PLAYBACK_H
#define PLAYBACK_H
-
#include <sound/pcm.h>
#include "driver.h"
-
/*
When the TonePort is used with jack in full duplex mode and the outputs are
not connected, the software monitor produces an ugly noise since everything
*/
#define USE_CLEAR_BUFFER_WORKAROUND 1
-
extern struct snd_pcm_ops snd_line6_playback_ops;
extern int line6_create_audio_out_urbs(struct snd_line6_pcm *line6pcm);
/*
- * Line6 Linux USB driver - 0.9.0
+ * Line6 Linux USB driver - 0.9.1beta
*
* Copyright (C) 2004-2010 Markus Grabner (grabner@icg.tugraz.at)
*
#include "playback.h"
#include "pod.h"
-
#define POD_SYSEX_CODE 3
-#define POD_BYTES_PER_FRAME 6 /* 24bit audio (stereo) */
+#define POD_BYTES_PER_FRAME 6 /* 24bit audio (stereo) */
+/* *INDENT-OFF* */
enum {
POD_SYSEX_CLIP = 0x0f,
POD_system_invalid = 0x10000
};
+/* *INDENT-ON* */
+
enum {
POD_DUMP_MEMORY = 2
};
POD_BUSY_MIDISEND
};
-
static struct snd_ratden pod_ratden = {
.num_min = 78125,
.num_max = 78125,
static struct line6_pcm_properties pod_pcm_properties = {
.snd_line6_playback_hw = {
- .info = (SNDRV_PCM_INFO_MMAP |
- SNDRV_PCM_INFO_INTERLEAVED |
- SNDRV_PCM_INFO_BLOCK_TRANSFER |
- SNDRV_PCM_INFO_MMAP_VALID |
- SNDRV_PCM_INFO_PAUSE |
+ .info = (SNDRV_PCM_INFO_MMAP |
+ SNDRV_PCM_INFO_INTERLEAVED |
+ SNDRV_PCM_INFO_BLOCK_TRANSFER |
+ SNDRV_PCM_INFO_MMAP_VALID |
+ SNDRV_PCM_INFO_PAUSE |
#ifdef CONFIG_PM
- SNDRV_PCM_INFO_RESUME |
+ SNDRV_PCM_INFO_RESUME |
#endif
- SNDRV_PCM_INFO_SYNC_START),
- .formats = SNDRV_PCM_FMTBIT_S24_3LE,
- .rates = SNDRV_PCM_RATE_KNOT,
- .rate_min = 39062,
- .rate_max = 39063,
- .channels_min = 2,
- .channels_max = 2,
- .buffer_bytes_max = 60000,
- .period_bytes_min = 64,
- .period_bytes_max = 8192,
- .periods_min = 1,
- .periods_max = 1024
- },
+ SNDRV_PCM_INFO_SYNC_START),
+ .formats = SNDRV_PCM_FMTBIT_S24_3LE,
+ .rates = SNDRV_PCM_RATE_KNOT,
+ .rate_min = 39062,
+ .rate_max = 39063,
+ .channels_min = 2,
+ .channels_max = 2,
+ .buffer_bytes_max = 60000,
+ .period_bytes_min = 64,
+ .period_bytes_max = 8192,
+ .periods_min = 1,
+ .periods_max = 1024},
.snd_line6_capture_hw = {
- .info = (SNDRV_PCM_INFO_MMAP |
- SNDRV_PCM_INFO_INTERLEAVED |
- SNDRV_PCM_INFO_BLOCK_TRANSFER |
- SNDRV_PCM_INFO_MMAP_VALID |
+ .info = (SNDRV_PCM_INFO_MMAP |
+ SNDRV_PCM_INFO_INTERLEAVED |
+ SNDRV_PCM_INFO_BLOCK_TRANSFER |
+ SNDRV_PCM_INFO_MMAP_VALID |
#ifdef CONFIG_PM
- SNDRV_PCM_INFO_RESUME |
+ SNDRV_PCM_INFO_RESUME |
#endif
- SNDRV_PCM_INFO_SYNC_START),
- .formats = SNDRV_PCM_FMTBIT_S24_3LE,
- .rates = SNDRV_PCM_RATE_KNOT,
- .rate_min = 39062,
- .rate_max = 39063,
- .channels_min = 2,
- .channels_max = 2,
- .buffer_bytes_max = 60000,
- .period_bytes_min = 64,
- .period_bytes_max = 8192,
- .periods_min = 1,
- .periods_max = 1024
- },
+ SNDRV_PCM_INFO_SYNC_START),
+ .formats = SNDRV_PCM_FMTBIT_S24_3LE,
+ .rates = SNDRV_PCM_RATE_KNOT,
+ .rate_min = 39062,
+ .rate_max = 39063,
+ .channels_min = 2,
+ .channels_max = 2,
+ .buffer_bytes_max = 60000,
+ .period_bytes_min = 64,
+ .period_bytes_max = 8192,
+ .periods_min = 1,
+ .periods_max = 1024},
.snd_line6_rates = {
- .nrats = 1,
- .rats = &pod_ratden
- },
+ .nrats = 1,
+ .rats = &pod_ratden},
.bytes_per_frame = POD_BYTES_PER_FRAME
};
0xf0, 0x00, 0x01, 0x0c, 0x03, 0x75, 0xf7
};
-static const char pod_version_header[] = {
+static const char pod_version_header[] = {
0xf2, 0x7e, 0x7f, 0x06, 0x02
};
-
/* forward declarations: */
static void pod_startup2(unsigned long data);
static void pod_startup3(struct usb_line6_pod *pod);
static void pod_startup4(struct usb_line6_pod *pod);
-
/*
Mark all parameters as dirty and notify waiting processes.
*/
set_bit(i, pod->param_dirty);
}
-static char *pod_alloc_sysex_buffer(struct usb_line6_pod *pod, int code, int size)
+static char *pod_alloc_sysex_buffer(struct usb_line6_pod *pod, int code,
+ int size)
{
- return line6_alloc_sysex_buffer(&pod->line6, POD_SYSEX_CODE, code, size);
+ return line6_alloc_sysex_buffer(&pod->line6, POD_SYSEX_CODE, code,
+ size);
}
/*
/*
Handle SAVE button.
*/
-static void pod_save_button_pressed(struct usb_line6_pod *pod, int type, int index)
+static void pod_save_button_pressed(struct usb_line6_pod *pod, int type,
+ int index)
{
pod->dirty = 0;
set_bit(POD_SAVE_PRESSED, &pod->atomic_flags);
case LINE6_PARAM_CHANGE:
case LINE6_PROGRAM_CHANGE:
case LINE6_SYSEX_BEGIN:
- break; /* handle these further down */
+ break; /* handle these further down */
default:
- return; /* ignore all others */
+ return; /* ignore all others */
}
/* process all remaining messages */
if ((buf[1] == POD_amp_model_setup) ||
(buf[1] == POD_effect_setup))
/* these also affect other settings */
- line6_dump_request_async(&pod->dumpreq, &pod->line6, 0, LINE6_DUMP_CURRENT);
+ line6_dump_request_async(&pod->dumpreq, &pod->line6, 0,
+ LINE6_DUMP_CURRENT);
break;
pod->channel_num = buf[1];
pod->dirty = 0;
set_bit(POD_CHANNEL_DIRTY, &pod->atomic_flags);
- line6_dump_request_async(&pod->dumpreq, &pod->line6, 0, LINE6_DUMP_CURRENT);
+ line6_dump_request_async(&pod->dumpreq, &pod->line6, 0,
+ LINE6_DUMP_CURRENT);
break;
case LINE6_SYSEX_BEGIN | LINE6_CHANNEL_DEVICE:
if (memcmp(buf + 1, line6_midi_id, sizeof(line6_midi_id)) == 0) {
switch (buf[5]) {
case POD_SYSEX_DUMP:
- if (pod->line6.message_length == sizeof(pod->prog_data) + 7) {
+ if (pod->line6.message_length ==
+ sizeof(pod->prog_data) + 7) {
switch (pod->dumpreq.in_progress) {
case LINE6_DUMP_CURRENT:
- memcpy(&pod->prog_data, buf + 7, sizeof(pod->prog_data));
+ memcpy(&pod->prog_data, buf + 7,
+ sizeof(pod->prog_data));
pod_mark_batch_all_dirty(pod);
break;
case POD_DUMP_MEMORY:
- memcpy(&pod->prog_data_buf, buf + 7, sizeof(pod->prog_data_buf));
+ memcpy(&pod->prog_data_buf,
+ buf + 7,
+ sizeof
+ (pod->prog_data_buf));
break;
default:
- DEBUG_MESSAGES(dev_err(pod->line6.ifcdev, "unknown dump code %02X\n", pod->dumpreq.in_progress));
+ DEBUG_MESSAGES(dev_err
+ (pod->
+ line6.ifcdev,
+ "unknown dump code %02X\n",
+ pod->
+ dumpreq.in_progress));
}
line6_dump_finished(&pod->dumpreq);
pod_startup3(pod);
} else
- DEBUG_MESSAGES(dev_err(pod->line6.ifcdev, "wrong size of channel dump message (%d instead of %d)\n",
- pod->line6.message_length, (int)sizeof(pod->prog_data) + 7));
+ DEBUG_MESSAGES(dev_err
+ (pod->line6.ifcdev,
+ "wrong size of channel dump message (%d instead of %d)\n",
+ pod->
+ line6.message_length,
+ (int)
+ sizeof(pod->prog_data) +
+ 7));
break;
- case POD_SYSEX_SYSTEM: {
- short value = ((int)buf[7] << 12) | ((int)buf[8] << 8) | ((int)buf[9] << 4) | (int)buf[10];
+ case POD_SYSEX_SYSTEM:{
+ short value =
+ ((int)buf[7] << 12) | ((int)buf[8]
+ << 8) |
+ ((int)buf[9] << 4) | (int)buf[10];
#define PROCESS_SYSTEM_PARAM(x) \
case POD_ ## x: \
wake_up(&pod->x.wait); \
break;
- switch (buf[6]) {
- PROCESS_SYSTEM_PARAM(monitor_level);
- PROCESS_SYSTEM_PARAM(routing);
- PROCESS_SYSTEM_PARAM(tuner_mute);
- PROCESS_SYSTEM_PARAM(tuner_freq);
- PROCESS_SYSTEM_PARAM(tuner_note);
- PROCESS_SYSTEM_PARAM(tuner_pitch);
+ switch (buf[6]) {
+ PROCESS_SYSTEM_PARAM
+ (monitor_level);
+ PROCESS_SYSTEM_PARAM(routing);
+ PROCESS_SYSTEM_PARAM
+ (tuner_mute);
+ PROCESS_SYSTEM_PARAM
+ (tuner_freq);
+ PROCESS_SYSTEM_PARAM
+ (tuner_note);
+ PROCESS_SYSTEM_PARAM
+ (tuner_pitch);
#undef PROCESS_SYSTEM_PARAM
- default:
- DEBUG_MESSAGES(dev_err(pod->line6.ifcdev, "unknown tuner/system response %02X\n", buf[6]));
- }
+ default:
+ DEBUG_MESSAGES(dev_err
+ (pod->
+ line6.ifcdev,
+ "unknown tuner/system response %02X\n",
+ buf[6]));
+ }
- break;
- }
+ break;
+ }
case POD_SYSEX_FINISH:
/* do we need to respond to this? */
break;
case POD_SYSEX_CLIP:
- DEBUG_MESSAGES(dev_err(pod->line6.ifcdev, "audio clipped\n"));
+ DEBUG_MESSAGES(dev_err
+ (pod->line6.ifcdev,
+ "audio clipped\n"));
pod->clipping.value = 1;
wake_up(&pod->clipping.wait);
break;
case POD_SYSEX_STORE:
- DEBUG_MESSAGES(dev_err(pod->line6.ifcdev, "message %02X not yet implemented\n", buf[5]));
+ DEBUG_MESSAGES(dev_err
+ (pod->line6.ifcdev,
+ "message %02X not yet implemented\n",
+ buf[5]));
break;
default:
- DEBUG_MESSAGES(dev_err(pod->line6.ifcdev, "unknown sysex message %02X\n", buf[5]));
+ DEBUG_MESSAGES(dev_err
+ (pod->line6.ifcdev,
+ "unknown sysex message %02X\n",
+ buf[5]));
}
- } else if (memcmp(buf, pod_version_header, sizeof(pod_version_header)) == 0) {
- pod->firmware_version = buf[13] * 100 + buf[14] * 10 + buf[15];
- pod->device_id = ((int)buf[8] << 16) | ((int)buf[9] << 8) | (int)buf[10];
+ } else
+ if (memcmp
+ (buf, pod_version_header,
+ sizeof(pod_version_header)) == 0) {
+ pod->firmware_version =
+ buf[13] * 100 + buf[14] * 10 + buf[15];
+ pod->device_id =
+ ((int)buf[8] << 16) | ((int)buf[9] << 8) | (int)
+ buf[10];
pod_startup4(pod);
} else
- DEBUG_MESSAGES(dev_err(pod->line6.ifcdev, "unknown sysex header\n"));
+ DEBUG_MESSAGES(dev_err
+ (pod->line6.ifcdev,
+ "unknown sysex header\n"));
break;
break;
default:
- DEBUG_MESSAGES(dev_err(pod->line6.ifcdev, "POD: unknown message %02X\n", buf[0]));
+ DEBUG_MESSAGES(dev_err
+ (pod->line6.ifcdev,
+ "POD: unknown message %02X\n", buf[0]));
}
}
*) This method fails if a param change message is "chopped" after the first
byte.
*/
-void line6_pod_midi_postprocess(struct usb_line6_pod *pod, unsigned char *data, int length)
+void line6_pod_midi_postprocess(struct usb_line6_pod *pod, unsigned char *data,
+ int length)
{
int i;
if (data[i] == (LINE6_PROGRAM_CHANGE | LINE6_CHANNEL_HOST)) {
line6_invalidate_current(&pod->dumpreq);
break;
- } else if ((data[i] == (LINE6_PARAM_CHANGE | LINE6_CHANNEL_HOST)) && (i < length - 1))
- if ((data[i + 1] == POD_amp_model_setup) || (data[i + 1] == POD_effect_setup)) {
+ } else
+ if ((data[i] == (LINE6_PARAM_CHANGE | LINE6_CHANNEL_HOST))
+ && (i < length - 1))
+ if ((data[i + 1] == POD_amp_model_setup)
+ || (data[i + 1] == POD_effect_setup)) {
line6_invalidate_current(&pod->dumpreq);
break;
}
/*
Transmit PODxt Pro control parameter.
*/
-void line6_pod_transmit_parameter(struct usb_line6_pod *pod, int param, int value)
+void line6_pod_transmit_parameter(struct usb_line6_pod *pod, int param,
+ int value)
{
if (line6_transmit_parameter(&pod->line6, param, value) == 0)
pod_store_parameter(pod, param, value);
- if ((param == POD_amp_model_setup) || (param == POD_effect_setup)) /* these also affect other settings */
+ if ((param == POD_amp_model_setup) || (param == POD_effect_setup)) /* these also affect other settings */
line6_invalidate_current(&pod->dumpreq);
}
/*
Resolve value to memory location.
*/
-static int pod_resolve(const char *buf, short block0, short block1, unsigned char *location)
+static int pod_resolve(const char *buf, short block0, short block1,
+ unsigned char *location)
{
unsigned long value;
short block;
/*
Send command to store channel/effects setup/amp setup to PODxt Pro.
*/
-static ssize_t pod_send_store_command(struct device *dev, const char *buf, size_t count, short block0, short block1)
+static ssize_t pod_send_store_command(struct device *dev, const char *buf,
+ size_t count, short block0, short block1)
{
struct usb_interface *interface = to_usb_interface(dev);
struct usb_line6_pod *pod = usb_get_intfdata(interface);
if (!sysex)
return 0;
- sysex[SYSEX_DATA_OFS] = 5; /* see pod_dump() */
+ sysex[SYSEX_DATA_OFS] = 5; /* see pod_dump() */
ret = pod_resolve(buf, block0, block1, sysex + SYSEX_DATA_OFS + 1);
if (ret) {
kfree(sysex);
return ret;
}
- memcpy(sysex + SYSEX_DATA_OFS + 3, &pod->prog_data_buf, sizeof(pod->prog_data_buf));
+ memcpy(sysex + SYSEX_DATA_OFS + 3, &pod->prog_data_buf,
+ sizeof(pod->prog_data_buf));
line6_send_sysex_message(&pod->line6, sysex, size);
kfree(sysex);
/*
Send command to retrieve channel/effects setup/amp setup to PODxt Pro.
*/
-static ssize_t pod_send_retrieve_command(struct device *dev, const char *buf, size_t count, short block0, short block1)
+static ssize_t pod_send_retrieve_command(struct device *dev, const char *buf,
+ size_t count, short block0,
+ short block1)
{
struct usb_interface *interface = to_usb_interface(dev);
struct usb_line6_pod *pod = usb_get_intfdata(interface);
/*
Generic get name function.
*/
-static ssize_t get_name_generic(struct usb_line6_pod *pod, const char *str, char *buf)
+static ssize_t get_name_generic(struct usb_line6_pod *pod, const char *str,
+ char *buf)
{
int length = 0;
const char *p1;
{
struct usb_interface *interface = to_usb_interface(dev);
struct usb_line6_pod *pod = usb_get_intfdata(interface);
- return get_name_generic(pod, pod->prog_data.header + POD_NAME_OFFSET, buf);
+ return get_name_generic(pod, pod->prog_data.header + POD_NAME_OFFSET,
+ buf);
}
/*
{
struct usb_interface *interface = to_usb_interface(dev);
struct usb_line6_pod *pod = usb_get_intfdata(interface);
- return get_name_generic(pod, pod->prog_data_buf.header + POD_NAME_OFFSET, buf);
+ return get_name_generic(pod,
+ pod->prog_data_buf.header + POD_NAME_OFFSET,
+ buf);
}
/*
if (count != sizeof(pod->prog_data)) {
dev_err(pod->line6.ifcdev,
- "data block must be exactly %d bytes\n",
- (int)sizeof(pod->prog_data));
+ "data block must be exactly %d bytes\n",
+ (int)sizeof(pod->prog_data));
return -EINVAL;
}
static bool pod_is_tuner(int code)
{
return
- (code == POD_tuner_mute) ||
- (code == POD_tuner_freq) ||
- (code == POD_tuner_note) ||
- (code == POD_tuner_pitch);
+ (code == POD_tuner_mute) ||
+ (code == POD_tuner_freq) ||
+ (code == POD_tuner_note) || (code == POD_tuner_pitch);
}
/*
Get system parameter (as integer).
@param tuner non-zero, if code refers to a tuner parameter
*/
-static int pod_get_system_param_int(struct usb_line6_pod *pod, int *value, int code,
- struct ValueWait *param, int sign)
+static int pod_get_system_param_int(struct usb_line6_pod *pod, int *value,
+ int code, struct ValueWait *param, int sign)
{
char *sysex;
static const int size = 1;
int retval = 0;
- if (((pod->prog_data.control[POD_tuner] & 0x40) == 0) && pod_is_tuner(code))
+ if (((pod->prog_data.control[POD_tuner] & 0x40) == 0)
+ && pod_is_tuner(code))
return -ENODEV;
/* send value request to device: */
kfree(sysex);
/* wait for device to respond: */
- retval = wait_event_interruptible(param->wait, param->value != POD_system_invalid);
+ retval =
+ wait_event_interruptible(param->wait,
+ param->value != POD_system_invalid);
if (retval < 0)
return retval;
- *value = sign ? (int)(signed short)param->value : (int)(unsigned short)param->value;
+ *value = sign ? (int)(signed short)param->value : (int)(unsigned short)
+ param->value;
- if(*value == POD_system_invalid)
- *value = 0; /* don't report uninitialized values */
+ if (*value == POD_system_invalid)
+ *value = 0; /* don't report uninitialized values */
return 0;
}
Get system parameter (as string).
@param tuner non-zero, if code refers to a tuner parameter
*/
-static ssize_t pod_get_system_param_string(struct usb_line6_pod *pod, char *buf, int code,
- struct ValueWait *param, int sign)
+static ssize_t pod_get_system_param_string(struct usb_line6_pod *pod, char *buf,
+ int code, struct ValueWait *param,
+ int sign)
{
int retval, value = 0;
retval = pod_get_system_param_int(pod, &value, code, param, sign);
- if(retval < 0)
+ if (retval < 0)
return retval;
return sprintf(buf, "%d\n", value);
Send system parameter (from integer).
@param tuner non-zero, if code refers to a tuner parameter
*/
-static int pod_set_system_param_int(struct usb_line6_pod *pod, int value, int code)
+static int pod_set_system_param_int(struct usb_line6_pod *pod, int value,
+ int code)
{
char *sysex;
static const int size = 5;
- if (((pod->prog_data.control[POD_tuner] & 0x40) == 0) && pod_is_tuner(code))
+ if (((pod->prog_data.control[POD_tuner] & 0x40) == 0)
+ && pod_is_tuner(code))
return -EINVAL;
/* send value to tuner: */
return -ENOMEM;
sysex[SYSEX_DATA_OFS] = code;
sysex[SYSEX_DATA_OFS + 1] = (value >> 12) & 0x0f;
- sysex[SYSEX_DATA_OFS + 2] = (value >> 8) & 0x0f;
- sysex[SYSEX_DATA_OFS + 3] = (value >> 4) & 0x0f;
- sysex[SYSEX_DATA_OFS + 4] = (value ) & 0x0f;
+ sysex[SYSEX_DATA_OFS + 2] = (value >> 8) & 0x0f;
+ sysex[SYSEX_DATA_OFS + 3] = (value >> 4) & 0x0f;
+ sysex[SYSEX_DATA_OFS + 4] = (value) & 0x0f;
line6_send_sysex_message(&pod->line6, sysex, size);
kfree(sysex);
return 0;
Send system parameter (from string).
@param tuner non-zero, if code refers to a tuner parameter
*/
-static ssize_t pod_set_system_param_string(struct usb_line6_pod *pod, const char *buf,
- int count, int code, unsigned short mask)
+static ssize_t pod_set_system_param_string(struct usb_line6_pod *pod,
+ const char *buf, int count, int code,
+ unsigned short mask)
{
int retval;
unsigned short value = simple_strtoul(buf, NULL, 10) & mask;
{
struct usb_interface *interface = to_usb_interface(dev);
struct usb_line6_pod *pod = usb_get_intfdata(interface);
- return wait_event_interruptible(pod->clipping.wait, pod->clipping.value != 0);
+ return wait_event_interruptible(pod->clipping.wait,
+ pod->clipping.value != 0);
}
/*
static void pod_startup1(struct usb_line6_pod *pod)
{
- CHECK_STARTUP_PROGRESS(pod->startup_progress, 1);
+ CHECK_STARTUP_PROGRESS(pod->startup_progress, POD_STARTUP_INIT);
/* delay startup procedure: */
- line6_start_timer(&pod->startup_timer, POD_STARTUP_DELAY, pod_startup2, (unsigned long)pod);
+ line6_start_timer(&pod->startup_timer, POD_STARTUP_DELAY, pod_startup2,
+ (unsigned long)pod);
}
static void pod_startup2(unsigned long data)
{
struct usb_line6_pod *pod = (struct usb_line6_pod *)data;
- CHECK_STARTUP_PROGRESS(pod->startup_progress, 2);
+
+ /* schedule another startup procedure until startup is complete: */
+ if (pod->startup_progress >= POD_STARTUP_LAST)
+ return;
+
+ pod->startup_progress = POD_STARTUP_DUMPREQ;
+ line6_start_timer(&pod->startup_timer, POD_STARTUP_DELAY, pod_startup2,
+ (unsigned long)pod);
/* current channel dump: */
- line6_dump_request_async(&pod->dumpreq, &pod->line6, 0, LINE6_DUMP_CURRENT);
+ line6_dump_request_async(&pod->dumpreq, &pod->line6, 0,
+ LINE6_DUMP_CURRENT);
}
static void pod_startup3(struct usb_line6_pod *pod)
{
struct usb_line6 *line6 = &pod->line6;
- CHECK_STARTUP_PROGRESS(pod->startup_progress, 3);
+ CHECK_STARTUP_PROGRESS(pod->startup_progress, POD_STARTUP_VERSIONREQ);
/* request firmware version: */
line6_version_request_async(line6);
static void pod_startup4(struct usb_line6_pod *pod)
{
- CHECK_STARTUP_PROGRESS(pod->startup_progress, 4);
+ CHECK_STARTUP_PROGRESS(pod->startup_progress, POD_STARTUP_WORKQUEUE);
/* schedule work for global work queue: */
schedule_work(&pod->startup_work);
static void pod_startup5(struct work_struct *work)
{
- struct usb_line6_pod *pod = container_of(work, struct usb_line6_pod, startup_work);
+ struct usb_line6_pod *pod =
+ container_of(work, struct usb_line6_pod, startup_work);
struct usb_line6 *line6 = &pod->line6;
- CHECK_STARTUP_PROGRESS(pod->startup_progress, 5);
+ CHECK_STARTUP_PROGRESS(pod->startup_progress, POD_STARTUP_SETUP);
/* serial number: */
line6_read_serial_number(&pod->line6, &pod->serial_number);
line6_register_audio(line6);
/* device files: */
- line6_pod_create_files(pod->firmware_version, line6->properties->device_bit, line6->ifcdev);
+ line6_pod_create_files(pod->firmware_version,
+ line6->properties->device_bit, line6->ifcdev);
}
#define POD_GET_SYSTEM_PARAM(code, sign) \
#undef GET_SYSTEM_PARAM
/* POD special files: */
-static DEVICE_ATTR(channel, S_IWUGO | S_IRUGO, pod_get_channel, pod_set_channel);
+static DEVICE_ATTR(channel, S_IWUGO | S_IRUGO, pod_get_channel,
+ pod_set_channel);
static DEVICE_ATTR(clip, S_IRUGO, pod_wait_for_clip, line6_nop_write);
static DEVICE_ATTR(device_id, S_IRUGO, pod_get_device_id, line6_nop_write);
static DEVICE_ATTR(dirty, S_IRUGO, pod_get_dirty, line6_nop_write);
static DEVICE_ATTR(dump, S_IWUGO | S_IRUGO, pod_get_dump, pod_set_dump);
-static DEVICE_ATTR(dump_buf, S_IWUGO | S_IRUGO, pod_get_dump_buf, pod_set_dump_buf);
+static DEVICE_ATTR(dump_buf, S_IWUGO | S_IRUGO, pod_get_dump_buf,
+ pod_set_dump_buf);
static DEVICE_ATTR(finish, S_IWUGO, line6_nop_read, pod_set_finish);
-static DEVICE_ATTR(firmware_version, S_IRUGO, pod_get_firmware_version, line6_nop_write);
-static DEVICE_ATTR(midi_postprocess, S_IWUGO | S_IRUGO, pod_get_midi_postprocess, pod_set_midi_postprocess);
-static DEVICE_ATTR(monitor_level, S_IWUGO | S_IRUGO, pod_get_monitor_level, pod_set_monitor_level);
+static DEVICE_ATTR(firmware_version, S_IRUGO, pod_get_firmware_version,
+ line6_nop_write);
+static DEVICE_ATTR(midi_postprocess, S_IWUGO | S_IRUGO,
+ pod_get_midi_postprocess, pod_set_midi_postprocess);
+static DEVICE_ATTR(monitor_level, S_IWUGO | S_IRUGO, pod_get_monitor_level,
+ pod_set_monitor_level);
static DEVICE_ATTR(name, S_IRUGO, pod_get_name, line6_nop_write);
static DEVICE_ATTR(name_buf, S_IRUGO, pod_get_name_buf, line6_nop_write);
-static DEVICE_ATTR(retrieve_amp_setup, S_IWUGO, line6_nop_read, pod_set_retrieve_amp_setup);
-static DEVICE_ATTR(retrieve_channel, S_IWUGO, line6_nop_read, pod_set_retrieve_channel);
-static DEVICE_ATTR(retrieve_effects_setup, S_IWUGO, line6_nop_read, pod_set_retrieve_effects_setup);
-static DEVICE_ATTR(routing, S_IWUGO | S_IRUGO, pod_get_routing, pod_set_routing);
-static DEVICE_ATTR(serial_number, S_IRUGO, pod_get_serial_number, line6_nop_write);
-static DEVICE_ATTR(store_amp_setup, S_IWUGO, line6_nop_read, pod_set_store_amp_setup);
-static DEVICE_ATTR(store_channel, S_IWUGO, line6_nop_read, pod_set_store_channel);
-static DEVICE_ATTR(store_effects_setup, S_IWUGO, line6_nop_read, pod_set_store_effects_setup);
-static DEVICE_ATTR(tuner_freq, S_IWUGO | S_IRUGO, pod_get_tuner_freq, pod_set_tuner_freq);
-static DEVICE_ATTR(tuner_mute, S_IWUGO | S_IRUGO, pod_get_tuner_mute, pod_set_tuner_mute);
+static DEVICE_ATTR(retrieve_amp_setup, S_IWUGO, line6_nop_read,
+ pod_set_retrieve_amp_setup);
+static DEVICE_ATTR(retrieve_channel, S_IWUGO, line6_nop_read,
+ pod_set_retrieve_channel);
+static DEVICE_ATTR(retrieve_effects_setup, S_IWUGO, line6_nop_read,
+ pod_set_retrieve_effects_setup);
+static DEVICE_ATTR(routing, S_IWUGO | S_IRUGO, pod_get_routing,
+ pod_set_routing);
+static DEVICE_ATTR(serial_number, S_IRUGO, pod_get_serial_number,
+ line6_nop_write);
+static DEVICE_ATTR(store_amp_setup, S_IWUGO, line6_nop_read,
+ pod_set_store_amp_setup);
+static DEVICE_ATTR(store_channel, S_IWUGO, line6_nop_read,
+ pod_set_store_channel);
+static DEVICE_ATTR(store_effects_setup, S_IWUGO, line6_nop_read,
+ pod_set_store_effects_setup);
+static DEVICE_ATTR(tuner_freq, S_IWUGO | S_IRUGO, pod_get_tuner_freq,
+ pod_set_tuner_freq);
+static DEVICE_ATTR(tuner_mute, S_IWUGO | S_IRUGO, pod_get_tuner_mute,
+ pod_set_tuner_mute);
static DEVICE_ATTR(tuner_note, S_IRUGO, pod_get_tuner_note, line6_nop_write);
static DEVICE_ATTR(tuner_pitch, S_IRUGO, pod_get_tuner_pitch, line6_nop_write);
struct snd_line6_pcm *line6pcm = snd_kcontrol_chip(kcontrol);
struct usb_line6_pod *pod = (struct usb_line6_pod *)line6pcm->line6;
- if(ucontrol->value.integer.value[0] == pod->monitor_level.value)
+ if (ucontrol->value.integer.value[0] == pod->monitor_level.value)
return 0;
pod->monitor_level.value = ucontrol->value.integer.value[0];
- pod_set_system_param_int(pod, ucontrol->value.integer.value[0], POD_monitor_level);
+ pod_set_system_param_int(pod, ucontrol->value.integer.value[0],
+ POD_monitor_level);
return 1;
}
return;
line6_cleanup_audio(line6);
+ del_timer(&pod->startup_timer);
+ cancel_work_sync(&pod->startup_work);
+
/* free dump request data: */
line6_dumpreq_destruct(&pod->dumpreq);
}
/*
Try to init POD device.
*/
-static int pod_try_init(struct usb_interface *interface, struct usb_line6_pod *pod)
+static int pod_try_init(struct usb_interface *interface,
+ struct usb_line6_pod *pod)
{
int err;
struct usb_line6 *line6 = &pod->line6;
+ init_timer(&pod->startup_timer);
+ INIT_WORK(&pod->startup_work, pod_startup5);
+
if ((interface == NULL) || (pod == NULL))
return -ENODEV;
init_waitqueue_head(&pod->tuner_note.wait);
init_waitqueue_head(&pod->tuner_pitch.wait);
init_waitqueue_head(&pod->clipping.wait);
- init_timer(&pod->startup_timer);
- INIT_WORK(&pod->startup_work, pod_startup5);
memset(pod->param_dirty, 0xff, sizeof(pod->param_dirty));
}
/* register monitor control: */
- err = snd_ctl_add(line6->card, snd_ctl_new1(&pod_control_monitor, line6->line6pcm));
+ err =
+ snd_ctl_add(line6->card,
+ snd_ctl_new1(&pod_control_monitor, line6->line6pcm));
if (err < 0) {
return err;
}
/*
- When the sound card is registered at this point, the PODxt Live
- displays "Invalid Code Error 07", so we do it later in the event
- handler.
- */
+ When the sound card is registered at this point, the PODxt Live
+ displays "Invalid Code Error 07", so we do it later in the event
+ handler.
+ */
if (pod->line6.properties->capabilities & LINE6_BIT_CONTROL) {
pod->monitor_level.value = POD_system_invalid;
if (dev != NULL) {
/* remove sysfs entries: */
- line6_pod_remove_files(pod->firmware_version, pod->line6.properties->device_bit, dev);
+ line6_pod_remove_files(pod->firmware_version,
+ pod->line6.
+ properties->device_bit, dev);
device_remove_file(dev, &dev_attr_channel);
device_remove_file(dev, &dev_attr_clip);
device_remove_file(dev, &dev_attr_name_buf);
device_remove_file(dev, &dev_attr_retrieve_amp_setup);
device_remove_file(dev, &dev_attr_retrieve_channel);
- device_remove_file(dev, &dev_attr_retrieve_effects_setup);
+ device_remove_file(dev,
+ &dev_attr_retrieve_effects_setup);
device_remove_file(dev, &dev_attr_routing);
device_remove_file(dev, &dev_attr_serial_number);
device_remove_file(dev, &dev_attr_store_amp_setup);
/*
- * Line6 Linux USB driver - 0.9.0
+ * Line6 Linux USB driver - 0.9.1beta
*
* Copyright (C) 2004-2010 Markus Grabner (grabner@icg.tugraz.at)
*
#ifndef POD_H
#define POD_H
-
#include <linux/interrupt.h>
#include <linux/spinlock.h>
#include <linux/usb.h>
#include "driver.h"
#include "dumprequest.h"
-
/*
PODxt Live interfaces
*/
*/
#define POD_CONTROL_SIZE 0x80
#define POD_BUFSIZE_DUMPREQ 7
-#define POD_STARTUP_DELAY 3000
+#define POD_STARTUP_DELAY 1000
+
+/*
+ Stages of POD startup procedure
+*/
+enum {
+ POD_STARTUP_INIT = 1,
+ POD_STARTUP_DUMPREQ,
+ POD_STARTUP_VERSIONREQ,
+ POD_STARTUP_WORKQUEUE,
+ POD_STARTUP_SETUP,
+ POD_STARTUP_LAST = POD_STARTUP_SETUP - 1
+};
/**
Data structure for values that need to be requested explicitly.
char midi_postprocess;
};
-
extern void line6_pod_disconnect(struct usb_interface *interface);
-extern int line6_pod_init(struct usb_interface *interface, struct usb_line6_pod *pod);
+extern int line6_pod_init(struct usb_interface *interface,
+ struct usb_line6_pod *pod);
extern void line6_pod_midi_postprocess(struct usb_line6_pod *pod,
unsigned char *data, int length);
extern void line6_pod_process_message(struct usb_line6_pod *pod);
extern void line6_pod_transmit_parameter(struct usb_line6_pod *pod, int param,
int value);
-
#endif
#ifndef DRIVER_REVISION
/* current subversion revision */
-#define DRIVER_REVISION " (revision 665)"
+#define DRIVER_REVISION " (revision 684)"
#endif
/*
- * Line6 Linux USB driver - 0.9.0
+ * Line6 Linux USB driver - 0.9.1beta
*
* Copyright (C) 2004-2010 Markus Grabner (grabner@icg.tugraz.at)
* Emil Myhrman (emil.myhrman@gmail.com)
#include "playback.h"
#include "toneport.h"
-
static int toneport_send_cmd(struct usb_device *usbdev, int cmd1, int cmd2);
-
#define TONEPORT_PCM_DELAY 1
-
static struct snd_ratden toneport_ratden = {
.num_min = 44100,
.num_max = 44100,
static struct line6_pcm_properties toneport_pcm_properties = {
.snd_line6_playback_hw = {
- .info = (SNDRV_PCM_INFO_MMAP |
- SNDRV_PCM_INFO_INTERLEAVED |
- SNDRV_PCM_INFO_BLOCK_TRANSFER |
- SNDRV_PCM_INFO_MMAP_VALID |
- SNDRV_PCM_INFO_PAUSE |
+ .info = (SNDRV_PCM_INFO_MMAP |
+ SNDRV_PCM_INFO_INTERLEAVED |
+ SNDRV_PCM_INFO_BLOCK_TRANSFER |
+ SNDRV_PCM_INFO_MMAP_VALID |
+ SNDRV_PCM_INFO_PAUSE |
#ifdef CONFIG_PM
- SNDRV_PCM_INFO_RESUME |
+ SNDRV_PCM_INFO_RESUME |
#endif
- SNDRV_PCM_INFO_SYNC_START),
- .formats = SNDRV_PCM_FMTBIT_S16_LE,
- .rates = SNDRV_PCM_RATE_KNOT,
- .rate_min = 44100,
- .rate_max = 44100,
- .channels_min = 2,
- .channels_max = 2,
- .buffer_bytes_max = 60000,
- .period_bytes_min = 64,
- .period_bytes_max = 8192,
- .periods_min = 1,
- .periods_max = 1024
- },
+ SNDRV_PCM_INFO_SYNC_START),
+ .formats = SNDRV_PCM_FMTBIT_S16_LE,
+ .rates = SNDRV_PCM_RATE_KNOT,
+ .rate_min = 44100,
+ .rate_max = 44100,
+ .channels_min = 2,
+ .channels_max = 2,
+ .buffer_bytes_max = 60000,
+ .period_bytes_min = 64,
+ .period_bytes_max = 8192,
+ .periods_min = 1,
+ .periods_max = 1024},
.snd_line6_capture_hw = {
- .info = (SNDRV_PCM_INFO_MMAP |
- SNDRV_PCM_INFO_INTERLEAVED |
- SNDRV_PCM_INFO_BLOCK_TRANSFER |
- SNDRV_PCM_INFO_MMAP_VALID |
+ .info = (SNDRV_PCM_INFO_MMAP |
+ SNDRV_PCM_INFO_INTERLEAVED |
+ SNDRV_PCM_INFO_BLOCK_TRANSFER |
+ SNDRV_PCM_INFO_MMAP_VALID |
#ifdef CONFIG_PM
- SNDRV_PCM_INFO_RESUME |
+ SNDRV_PCM_INFO_RESUME |
#endif
- SNDRV_PCM_INFO_SYNC_START),
- .formats = SNDRV_PCM_FMTBIT_S16_LE,
- .rates = SNDRV_PCM_RATE_KNOT,
- .rate_min = 44100,
- .rate_max = 44100,
- .channels_min = 2,
- .channels_max = 2,
- .buffer_bytes_max = 60000,
- .period_bytes_min = 64,
- .period_bytes_max = 8192,
- .periods_min = 1,
- .periods_max = 1024
- },
+ SNDRV_PCM_INFO_SYNC_START),
+ .formats = SNDRV_PCM_FMTBIT_S16_LE,
+ .rates = SNDRV_PCM_RATE_KNOT,
+ .rate_min = 44100,
+ .rate_max = 44100,
+ .channels_min = 2,
+ .channels_max = 2,
+ .buffer_bytes_max = 60000,
+ .period_bytes_min = 64,
+ .period_bytes_max = 8192,
+ .periods_min = 1,
+ .periods_max = 1024},
.snd_line6_rates = {
- .nrats = 1,
- .rats = &toneport_ratden
- },
+ .nrats = 1,
+ .rats = &toneport_ratden},
.bytes_per_frame = 4
};
static int led_red = 0x00;
static int led_green = 0x26;
-struct ToneportSourceInfo
-{
+struct ToneportSourceInfo {
const char *name;
int code;
};
static const struct ToneportSourceInfo toneport_source_info[] = {
- { "Microphone", 0x0a01 },
- { "Line" , 0x0801 },
- { "Instrument", 0x0b01 },
- { "Inst & Mic", 0x0901 }
+ {"Microphone", 0x0a01},
+ {"Line", 0x0801},
+ {"Instrument", 0x0b01},
+ {"Inst & Mic", 0x0901}
};
static bool toneport_has_led(short product)
{
return
- (product == LINE6_DEVID_GUITARPORT) ||
- (product == LINE6_DEVID_TONEPORT_GX);
+ (product == LINE6_DEVID_GUITARPORT) ||
+ (product == LINE6_DEVID_TONEPORT_GX);
/* add your device here if you are missing support for the LEDs */
}
static DEVICE_ATTR(led_green, S_IWUGO | S_IRUGO, line6_nop_read,
toneport_set_led_green);
-
static int toneport_send_cmd(struct usb_device *usbdev, int cmd1, int cmd2)
{
int ret;
{
struct snd_line6_pcm *line6pcm = snd_kcontrol_chip(kcontrol);
- if(ucontrol->value.integer.value[0] == line6pcm->volume_monitor)
+ if (ucontrol->value.integer.value[0] == line6pcm->volume_monitor)
return 0;
line6pcm->volume_monitor = ucontrol->value.integer.value[0];
+
+ if (line6pcm->volume_monitor > 0)
+ line6_pcm_start(line6pcm, MASK_PCM_MONITOR);
+ else
+ line6_pcm_stop(line6pcm, MASK_PCM_MONITOR);
+
return 1;
}
uinfo->count = 1;
uinfo->value.enumerated.items = size;
- if(uinfo->value.enumerated.item >= size)
+ if (uinfo->value.enumerated.item >= size)
uinfo->value.enumerated.item = size - 1;
strcpy(uinfo->value.enumerated.name,
struct snd_ctl_elem_value *ucontrol)
{
struct snd_line6_pcm *line6pcm = snd_kcontrol_chip(kcontrol);
- struct usb_line6_toneport *toneport = (struct usb_line6_toneport *)line6pcm->line6;
+ struct usb_line6_toneport *toneport =
+ (struct usb_line6_toneport *)line6pcm->line6;
ucontrol->value.enumerated.item[0] = toneport->source;
return 0;
}
struct snd_ctl_elem_value *ucontrol)
{
struct snd_line6_pcm *line6pcm = snd_kcontrol_chip(kcontrol);
- struct usb_line6_toneport *toneport = (struct usb_line6_toneport *)line6pcm->line6;
+ struct usb_line6_toneport *toneport =
+ (struct usb_line6_toneport *)line6pcm->line6;
- if(ucontrol->value.enumerated.item[0] == toneport->source)
+ if (ucontrol->value.enumerated.item[0] == toneport->source)
return 0;
toneport->source = ucontrol->value.enumerated.item[0];
- toneport_send_cmd(toneport->line6.usbdev, toneport_source_info[toneport->source].code, 0x0000);
+ toneport_send_cmd(toneport->line6.usbdev,
+ toneport_source_info[toneport->source].code, 0x0000);
return 1;
}
toneport_send_cmd(usbdev, 0x0301, 0x0000);
/* initialize source select: */
- switch(usbdev->descriptor.idProduct) {
+ switch (usbdev->descriptor.idProduct) {
case LINE6_DEVID_TONEPORT_UX1:
case LINE6_DEVID_PODSTUDIO_UX1:
- toneport_send_cmd(usbdev, toneport_source_info[toneport->source].code, 0x0000);
+ toneport_send_cmd(usbdev,
+ toneport_source_info[toneport->source].code,
+ 0x0000);
}
if (toneport_has_led(usbdev->descriptor.idProduct))
}
/* register monitor control: */
- err = snd_ctl_add(line6->card, snd_ctl_new1(&toneport_control_monitor, line6->line6pcm));
+ err =
+ snd_ctl_add(line6->card,
+ snd_ctl_new1(&toneport_control_monitor,
+ line6->line6pcm));
if (err < 0) {
return err;
}
/* register source select control: */
- switch(usbdev->descriptor.idProduct) {
+ switch (usbdev->descriptor.idProduct) {
case LINE6_DEVID_TONEPORT_UX1:
case LINE6_DEVID_PODSTUDIO_UX1:
- err = snd_ctl_add(line6->card, snd_ctl_new1(&toneport_control_source, line6->line6pcm));
+ err =
+ snd_ctl_add(line6->card,
+ snd_ctl_new1(&toneport_control_source,
+ line6->line6pcm));
if (err < 0) {
return err;
}
line6_read_data(line6, 0x80c2, &toneport->firmware_version, 1);
if (toneport_has_led(usbdev->descriptor.idProduct)) {
- CHECK_RETURN(device_create_file(&interface->dev, &dev_attr_led_red));
- CHECK_RETURN(device_create_file(&interface->dev, &dev_attr_led_green));
+ CHECK_RETURN(device_create_file
+ (&interface->dev, &dev_attr_led_red));
+ CHECK_RETURN(device_create_file
+ (&interface->dev, &dev_attr_led_green));
}
toneport_setup(toneport);
/*
- * Line6 Linux USB driver - 0.9.0
+ * Line6 Linux USB driver - 0.9.1beta
*
* Copyright (C) 2004-2010 Markus Grabner (grabner@icg.tugraz.at)
*
#ifndef TONEPORT_H
#define TONEPORT_H
-
#include <linux/usb.h>
#include <sound/core.h>
#include "driver.h"
-
struct usb_line6_toneport {
/**
Generic Line6 USB data.
struct timer_list timer;
};
-
extern void line6_toneport_disconnect(struct usb_interface *interface);
extern int line6_toneport_init(struct usb_interface *interface,
struct usb_line6_toneport *toneport);
extern void line6_toneport_reset_resume(struct usb_line6_toneport *toneport);
-
#endif
/*
- * Line6 Linux USB driver - 0.9.0
+ * Line6 Linux USB driver - 0.9.1beta
*
* Copyright (C) 2005-2008 Markus Grabner (grabner@icg.tugraz.at)
*
#ifndef USBDEFS_H
#define USBDEFS_H
-
#define LINE6_VENDOR_ID 0x0e41
#define USB_INTERVALS_PER_SECOND 1000
#define LINE6_FALLBACK_INTERVAL 10
#define LINE6_FALLBACK_MAXPACKETSIZE 16
-
#endif
/*
- * Line6 Linux USB driver - 0.9.0
+ * Line6 Linux USB driver - 0.9.1beta
*
* Copyright (C) 2004-2010 Markus Grabner (grabner@icg.tugraz.at)
*
#include "driver.h"
#include "variax.h"
-
#define VARIAX_SYSEX_CODE 7
#define VARIAX_SYSEX_PARAM 0x3b
#define VARIAX_SYSEX_ACTIVATE 0x2a
#define VARIAX_MODEL_MESSAGE_LENGTH 199
#define VARIAX_OFFSET_ACTIVATE 7
-
/*
This message is sent by the device during initialization and identifies
the connected guitar model.
0x00, 0x00, 0x00, 0xf7
};
-
/* forward declarations: */
static int variax_create_files2(struct device *dev);
static void variax_startup2(unsigned long data);
static void variax_startup4(unsigned long data);
static void variax_startup5(unsigned long data);
-
/*
Decode data transmitted by workbench.
*/
static void variax_startup1(struct usb_line6_variax *variax)
{
- CHECK_STARTUP_PROGRESS(variax->startup_progress, 1);
+ CHECK_STARTUP_PROGRESS(variax->startup_progress, VARIAX_STARTUP_INIT);
/* delay startup procedure: */
- line6_start_timer(&variax->startup_timer, VARIAX_STARTUP_DELAY1, variax_startup2, (unsigned long)variax);
+ line6_start_timer(&variax->startup_timer1, VARIAX_STARTUP_DELAY1,
+ variax_startup2, (unsigned long)variax);
}
static void variax_startup2(unsigned long data)
{
struct usb_line6_variax *variax = (struct usb_line6_variax *)data;
struct usb_line6 *line6 = &variax->line6;
- CHECK_STARTUP_PROGRESS(variax->startup_progress, 2);
+
+ /* schedule another startup procedure until startup is complete: */
+ if (variax->startup_progress >= VARIAX_STARTUP_LAST)
+ return;
+
+ variax->startup_progress = VARIAX_STARTUP_VERSIONREQ;
+ line6_start_timer(&variax->startup_timer1, VARIAX_STARTUP_DELAY1,
+ variax_startup2, (unsigned long)variax);
/* request firmware version: */
line6_version_request_async(line6);
static void variax_startup3(struct usb_line6_variax *variax)
{
- CHECK_STARTUP_PROGRESS(variax->startup_progress, 3);
+ CHECK_STARTUP_PROGRESS(variax->startup_progress, VARIAX_STARTUP_WAIT);
/* delay startup procedure: */
- line6_start_timer(&variax->startup_timer, VARIAX_STARTUP_DELAY3, variax_startup4, (unsigned long)variax);
+ line6_start_timer(&variax->startup_timer2, VARIAX_STARTUP_DELAY3,
+ variax_startup4, (unsigned long)variax);
}
static void variax_startup4(unsigned long data)
{
struct usb_line6_variax *variax = (struct usb_line6_variax *)data;
- CHECK_STARTUP_PROGRESS(variax->startup_progress, 4);
+ CHECK_STARTUP_PROGRESS(variax->startup_progress,
+ VARIAX_STARTUP_ACTIVATE);
/* activate device: */
variax_activate_async(variax, 1);
- line6_start_timer(&variax->startup_timer, VARIAX_STARTUP_DELAY4, variax_startup5, (unsigned long)variax);
+ line6_start_timer(&variax->startup_timer2, VARIAX_STARTUP_DELAY4,
+ variax_startup5, (unsigned long)variax);
}
static void variax_startup5(unsigned long data)
{
struct usb_line6_variax *variax = (struct usb_line6_variax *)data;
- CHECK_STARTUP_PROGRESS(variax->startup_progress, 5);
+ CHECK_STARTUP_PROGRESS(variax->startup_progress,
+ VARIAX_STARTUP_DUMPREQ);
/* current model dump: */
- line6_dump_request_async(&variax->dumpreq, &variax->line6, 0, VARIAX_DUMP_PASS1);
+ line6_dump_request_async(&variax->dumpreq, &variax->line6, 0,
+ VARIAX_DUMP_PASS1);
/* passes 2 and 3 are performed implicitly before entering variax_startup6 */
}
static void variax_startup6(struct usb_line6_variax *variax)
{
- CHECK_STARTUP_PROGRESS(variax->startup_progress, 6);
+ CHECK_STARTUP_PROGRESS(variax->startup_progress,
+ VARIAX_STARTUP_WORKQUEUE);
/* schedule work for global work queue: */
schedule_work(&variax->startup_work);
static void variax_startup7(struct work_struct *work)
{
- struct usb_line6_variax *variax = container_of(work, struct usb_line6_variax, startup_work);
+ struct usb_line6_variax *variax =
+ container_of(work, struct usb_line6_variax, startup_work);
struct usb_line6 *line6 = &variax->line6;
- CHECK_STARTUP_PROGRESS(variax->startup_progress, 7);
+ CHECK_STARTUP_PROGRESS(variax->startup_progress, VARIAX_STARTUP_SETUP);
/* ALSA audio interface: */
line6_register_audio(&variax->line6);
case LINE6_PROGRAM_CHANGE | LINE6_CHANNEL_DEVICE:
case LINE6_PROGRAM_CHANGE | LINE6_CHANNEL_HOST:
variax->model = buf[1];
- line6_dump_request_async(&variax->dumpreq, &variax->line6, 0, VARIAX_DUMP_PASS1);
+ line6_dump_request_async(&variax->dumpreq, &variax->line6, 0,
+ VARIAX_DUMP_PASS1);
break;
case LINE6_RESET:
VARIAX_MODEL_MESSAGE_LENGTH) {
switch (variax->dumpreq.in_progress) {
case VARIAX_DUMP_PASS1:
- variax_decode(buf + VARIAX_MODEL_HEADER_LENGTH, (unsigned char *)&variax->model_data,
- (sizeof(variax->model_data.name) + sizeof(variax->model_data.control) / 2) * 2);
- line6_dump_request_async(&variax->dumpreq, &variax->line6, 1, VARIAX_DUMP_PASS2);
+ variax_decode(buf +
+ VARIAX_MODEL_HEADER_LENGTH,
+ (unsigned char *)
+ &variax->model_data,
+ (sizeof
+ (variax->model_data.
+ name) +
+ sizeof(variax->
+ model_data.
+ control)
+ / 2) * 2);
+ line6_dump_request_async
+ (&variax->dumpreq, &variax->line6,
+ 1, VARIAX_DUMP_PASS2);
break;
case VARIAX_DUMP_PASS2:
/* model name is transmitted twice, so skip it here: */
- variax_decode(buf + VARIAX_MODEL_HEADER_LENGTH,
- (unsigned char *)&variax->model_data.control + sizeof(variax->model_data.control) / 2,
- sizeof(variax->model_data.control) / 2 * 2);
- line6_dump_request_async(&variax->dumpreq, &variax->line6, 2, VARIAX_DUMP_PASS3);
+ variax_decode(buf +
+ VARIAX_MODEL_HEADER_LENGTH,
+ (unsigned char *)
+ &variax->
+ model_data.control +
+ sizeof(variax->model_data.
+ control)
+ / 2,
+ sizeof(variax->model_data.
+ control)
+ / 2 * 2);
+ line6_dump_request_async
+ (&variax->dumpreq, &variax->line6,
+ 2, VARIAX_DUMP_PASS3);
}
} else {
- DEBUG_MESSAGES(dev_err(variax->line6.ifcdev, "illegal length %d of model data\n", variax->line6.message_length));
+ DEBUG_MESSAGES(dev_err
+ (variax->line6.ifcdev,
+ "illegal length %d of model data\n",
+ variax->line6.message_length));
line6_dump_finished(&variax->dumpreq);
}
} else if (memcmp(buf + 1, variax_request_bank + 1,
break;
default:
- DEBUG_MESSAGES(dev_err(variax->line6.ifcdev, "Variax: unknown message %02X\n", buf[0]));
+ DEBUG_MESSAGES(dev_err
+ (variax->line6.ifcdev,
+ "Variax: unknown message %02X\n", buf[0]));
}
}
static ssize_t variax_get_volume(struct device *dev,
struct device_attribute *attr, char *buf)
{
- struct usb_line6_variax *variax = usb_get_intfdata(to_usb_interface(dev));
+ struct usb_line6_variax *variax =
+ usb_get_intfdata(to_usb_interface(dev));
return sprintf(buf, "%d\n", variax->volume);
}
struct device_attribute *attr,
const char *buf, size_t count)
{
- struct usb_line6_variax *variax = usb_get_intfdata(to_usb_interface(dev));
+ struct usb_line6_variax *variax =
+ usb_get_intfdata(to_usb_interface(dev));
unsigned long value;
int ret;
static ssize_t variax_get_model(struct device *dev,
struct device_attribute *attr, char *buf)
{
- struct usb_line6_variax *variax = usb_get_intfdata(to_usb_interface(dev));
+ struct usb_line6_variax *variax =
+ usb_get_intfdata(to_usb_interface(dev));
return sprintf(buf, "%d\n", variax->model);
}
struct device_attribute *attr,
const char *buf, size_t count)
{
- struct usb_line6_variax *variax = usb_get_intfdata(to_usb_interface(dev));
+ struct usb_line6_variax *variax =
+ usb_get_intfdata(to_usb_interface(dev));
unsigned long value;
int ret;
static ssize_t variax_get_active(struct device *dev,
struct device_attribute *attr, char *buf)
{
- struct usb_line6_variax *variax = usb_get_intfdata(to_usb_interface(dev));
- return sprintf(buf, "%d\n", variax->buffer_activate[VARIAX_OFFSET_ACTIVATE]);
+ struct usb_line6_variax *variax =
+ usb_get_intfdata(to_usb_interface(dev));
+ return sprintf(buf, "%d\n",
+ variax->buffer_activate[VARIAX_OFFSET_ACTIVATE]);
}
/*
struct device_attribute *attr,
const char *buf, size_t count)
{
- struct usb_line6_variax *variax = usb_get_intfdata(to_usb_interface(dev));
+ struct usb_line6_variax *variax =
+ usb_get_intfdata(to_usb_interface(dev));
unsigned long value;
int ret;
static ssize_t variax_get_tone(struct device *dev,
struct device_attribute *attr, char *buf)
{
- struct usb_line6_variax *variax = usb_get_intfdata(to_usb_interface(dev));
+ struct usb_line6_variax *variax =
+ usb_get_intfdata(to_usb_interface(dev));
return sprintf(buf, "%d\n", variax->tone);
}
struct device_attribute *attr,
const char *buf, size_t count)
{
- struct usb_line6_variax *variax = usb_get_intfdata(to_usb_interface(dev));
+ struct usb_line6_variax *variax =
+ usb_get_intfdata(to_usb_interface(dev));
unsigned long value;
int ret;
static ssize_t variax_get_name(struct device *dev,
struct device_attribute *attr, char *buf)
{
- struct usb_line6_variax *variax = usb_get_intfdata(to_usb_interface(dev));
+ struct usb_line6_variax *variax =
+ usb_get_intfdata(to_usb_interface(dev));
line6_dump_wait_interruptible(&variax->dumpreq);
return get_string(buf, variax->model_data.name,
sizeof(variax->model_data.name));
static ssize_t variax_get_bank(struct device *dev,
struct device_attribute *attr, char *buf)
{
- struct usb_line6_variax *variax = usb_get_intfdata(to_usb_interface(dev));
+ struct usb_line6_variax *variax =
+ usb_get_intfdata(to_usb_interface(dev));
line6_dump_wait_interruptible(&variax->dumpreq);
return get_string(buf, variax->bank, sizeof(variax->bank));
}
static ssize_t variax_get_dump(struct device *dev,
struct device_attribute *attr, char *buf)
{
- struct usb_line6_variax *variax = usb_get_intfdata(to_usb_interface(dev));
+ struct usb_line6_variax *variax =
+ usb_get_intfdata(to_usb_interface(dev));
int retval;
retval = line6_dump_wait_interruptible(&variax->dumpreq);
if (retval < 0)
static ssize_t variax_get_guitar(struct device *dev,
struct device_attribute *attr, char *buf)
{
- struct usb_line6_variax *variax = usb_get_intfdata(to_usb_interface(dev));
+ struct usb_line6_variax *variax =
+ usb_get_intfdata(to_usb_interface(dev));
return sprintf(buf, "%s\n", variax->guitar);
}
#ifdef CONFIG_LINE6_USB_RAW
-static char *variax_alloc_sysex_buffer(struct usb_line6_variax *variax, int code, int size)
+static char *variax_alloc_sysex_buffer(struct usb_line6_variax *variax,
+ int code, int size)
{
- return line6_alloc_sysex_buffer(&variax->line6, VARIAX_SYSEX_CODE, code, size);
+ return line6_alloc_sysex_buffer(&variax->line6, VARIAX_SYSEX_CODE, code,
+ size);
}
/*
struct device_attribute *attr,
const char *buf, size_t count)
{
- struct usb_line6_variax *variax = usb_get_intfdata(to_usb_interface(dev));
+ struct usb_line6_variax *variax =
+ usb_get_intfdata(to_usb_interface(dev));
int size;
int i;
char *sysex;
#endif
/* Variax workbench special files: */
-static DEVICE_ATTR(model, S_IWUGO | S_IRUGO, variax_get_model, variax_set_model);
-static DEVICE_ATTR(volume, S_IWUGO | S_IRUGO, variax_get_volume, variax_set_volume);
+static DEVICE_ATTR(model, S_IWUGO | S_IRUGO, variax_get_model,
+ variax_set_model);
+static DEVICE_ATTR(volume, S_IWUGO | S_IRUGO, variax_get_volume,
+ variax_set_volume);
static DEVICE_ATTR(tone, S_IWUGO | S_IRUGO, variax_get_tone, variax_set_tone);
static DEVICE_ATTR(name, S_IRUGO, variax_get_name, line6_nop_write);
static DEVICE_ATTR(bank, S_IRUGO, variax_get_bank, line6_nop_write);
static DEVICE_ATTR(dump, S_IRUGO, variax_get_dump, line6_nop_write);
-static DEVICE_ATTR(active, S_IWUGO | S_IRUGO, variax_get_active, variax_set_active);
+static DEVICE_ATTR(active, S_IWUGO | S_IRUGO, variax_get_active,
+ variax_set_active);
static DEVICE_ATTR(guitar, S_IRUGO, variax_get_guitar, line6_nop_write);
#ifdef CONFIG_LINE6_USB_RAW
static DEVICE_ATTR(raw2, S_IWUGO, line6_nop_read, variax_set_raw2);
#endif
-
/*
Variax destructor.
*/
return;
line6_cleanup_audio(line6);
+ del_timer(&variax->startup_timer1);
+ del_timer(&variax->startup_timer2);
+ cancel_work_sync(&variax->startup_work);
+
/* free dump request data: */
line6_dumpreq_destructbuf(&variax->dumpreq, 2);
line6_dumpreq_destructbuf(&variax->dumpreq, 1);
{
int err;
+ init_timer(&variax->startup_timer1);
+ init_timer(&variax->startup_timer2);
+ INIT_WORK(&variax->startup_work, variax_startup7);
+
if ((interface == NULL) || (variax == NULL))
return -ENODEV;
- init_timer(&variax->startup_timer);
- INIT_WORK(&variax->startup_work, variax_startup7);
-
/* initialize USB buffers: */
err = line6_dumpreq_init(&variax->dumpreq, variax_request_model1,
sizeof(variax_request_model1));
/*
- * Line6 Linux USB driver - 0.9.0
+ * Line6 Linux USB driver - 0.9.1beta
*
* Copyright (C) 2004-2010 Markus Grabner (grabner@icg.tugraz.at)
*
#ifndef VARIAX_H
#define VARIAX_H
-
#include <linux/spinlock.h>
#include <linux/usb.h>
#include <linux/wait.h>
#include "driver.h"
#include "dumprequest.h"
-
#define VARIAX_STARTUP_DELAY1 1000
#define VARIAX_STARTUP_DELAY3 100
#define VARIAX_STARTUP_DELAY4 100
+/*
+ Stages of Variax startup procedure
+*/
+enum {
+ VARIAX_STARTUP_INIT = 1,
+ VARIAX_STARTUP_VERSIONREQ,
+ VARIAX_STARTUP_WAIT,
+ VARIAX_STARTUP_ACTIVATE,
+ VARIAX_STARTUP_DUMPREQ,
+ VARIAX_STARTUP_WORKQUEUE,
+ VARIAX_STARTUP_SETUP,
+ VARIAX_STARTUP_LAST = VARIAX_STARTUP_SETUP - 1
+};
enum {
VARIAX_DUMP_PASS1 = LINE6_DUMP_CURRENT,
VARIAX_DUMP_PASS3
};
-
/**
Binary Variax model dump
*/
Dump request structure.
Append two extra buffers for 3-pass data query.
*/
- struct line6_dump_request dumpreq; struct line6_dump_reqbuf extrabuf[2];
+ struct line6_dump_request dumpreq;
+ struct line6_dump_reqbuf extrabuf[2];
/**
Buffer for activation code.
struct work_struct startup_work;
/**
- Timer for device initializaton.
+ Timers for device initializaton.
*/
- struct timer_list startup_timer;
+ struct timer_list startup_timer1;
+ struct timer_list startup_timer2;
/**
Current progress in startup procedure.
int startup_progress;
};
-
extern void line6_variax_disconnect(struct usb_interface *interface);
extern int line6_variax_init(struct usb_interface *interface,
struct usb_line6_variax *variax);
extern void line6_variax_process_message(struct usb_line6_variax *variax);
-
#endif
git://bbs.cooldavid.org / net-next-2.6.git / commitdiff