ARM: mach-shmobile: ap4evb: update MMC/SHDI tiny document

MMC0/SDHI1 (CN7) can be selected by dip switch.
And card voltage can be selected by jumper pin.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c
index 67da7371451c62125af572e334f2c71b9a3c140c..2963a11c92b4a805d977a795a48b75875caf6715 100644 (file)
--- a/arch/arm/mach-shmobile/board-ap4evb.c
+++ b/arch/arm/mach-shmobile/board-ap4evb.c
@@ -128,15 +128,21 @@
  */
 
 /*
- * MMC (CN7)
+ * MMC0/SDHI1 (CN7)
  *
- * J22 : 1-2: 1.8v for MMC
- *       2-3: 3.3v for MMC
- * SW1 : OFF
- * SW33: bit1: OFF
- *       bit2: ON
- *       bit3: ON
- *       bit4: X
+ * J22 : select card voltage
+ *       1-2 pin : 1.8v
+ *       2-3 pin : 3.3v
+ *
+ *        SW1  |             SW33
+ *             | bit1 | bit2 | bit3 | bit4
+ * ------------+------+------+------+-------
+ * MMC0   OFF  |  OFF |  ON  |  ON  |  X
+ * SDHI1  OFF  |  ON  |   X  |  OFF | ON
+ *
+ * voltage lebel
+ * CN7 : 1.8v
+ * CN12: 3.3v
  */
 
 /* MTD */