+++ /dev/null
-/*
- *************************************************************************
- * Ralink Tech Inc.
- * 5F., No.36, Taiyuan St., Jhubei City,
- * Hsinchu County 302,
- * Taiwan, R.O.C.
- *
- * (c) Copyright 2002-2007, Ralink Technology, Inc.
- *
- * This program is free software; you can redistribute it and/or modify *
- * it under the terms of the GNU General Public License as published by *
- * the Free Software Foundation; either version 2 of the License, or *
- * (at your option) any later version. *
- * *
- * This program is distributed in the hope that it will be useful, *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
- * GNU General Public License for more details. *
- * *
- * You should have received a copy of the GNU General Public License *
- * along with this program; if not, write to the *
- * Free Software Foundation, Inc., *
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
- * *
- *************************************************************************
-*/
-
-/*
- All functions in this file must be PCI-depended, or you should out your function
- in other files.
-
-*/
-#include "../rt_config.h"
-
-extern RTMP_RF_REGS RF2850RegTable[];
-extern UCHAR NUM_OF_2850_CHNL;
-
-USHORT RtmpPCI_WriteTxResource(
- IN PRTMP_ADAPTER pAd,
- IN TX_BLK *pTxBlk,
- IN BOOLEAN bIsLast,
- OUT USHORT *FreeNumber)
-{
-
- UCHAR *pDMAHeaderBufVA;
- USHORT TxIdx, RetTxIdx;
- PTXD_STRUC pTxD;
- UINT32 BufBasePaLow;
- PRTMP_TX_RING pTxRing;
- USHORT hwHeaderLen;
-
- //
- // get Tx Ring Resource
- //
- pTxRing = &pAd->TxRing[pTxBlk->QueIdx];
- TxIdx = pAd->TxRing[pTxBlk->QueIdx].TxCpuIdx;
- pDMAHeaderBufVA = (PUCHAR) pTxRing->Cell[TxIdx].DmaBuf.AllocVa;
- BufBasePaLow = RTMP_GetPhysicalAddressLow(pTxRing->Cell[TxIdx].DmaBuf.AllocPa);
-
- // copy TXINFO + TXWI + WLAN Header + LLC into DMA Header Buffer
- if (pTxBlk->TxFrameType == TX_AMSDU_FRAME)
- {
- hwHeaderLen = pTxBlk->MpduHeaderLen - LENGTH_AMSDU_SUBFRAMEHEAD + pTxBlk->HdrPadLen + LENGTH_AMSDU_SUBFRAMEHEAD;
- }
- else
- {
- hwHeaderLen = pTxBlk->MpduHeaderLen + pTxBlk->HdrPadLen;
- }
- NdisMoveMemory(pDMAHeaderBufVA, pTxBlk->HeaderBuf, TXINFO_SIZE + TXWI_SIZE + hwHeaderLen);
-
- pTxRing->Cell[TxIdx].pNdisPacket = pTxBlk->pPacket;
- pTxRing->Cell[TxIdx].pNextNdisPacket = NULL;
-
- //
- // build Tx Descriptor
- //
-
- pTxD = (PTXD_STRUC) pTxRing->Cell[TxIdx].AllocVa;
- NdisZeroMemory(pTxD, TXD_SIZE);
-
- pTxD->SDPtr0 = BufBasePaLow;
- pTxD->SDLen0 = TXINFO_SIZE + TXWI_SIZE + hwHeaderLen; // include padding
- pTxD->SDPtr1 = PCI_MAP_SINGLE(pAd, pTxBlk, 0, 1, PCI_DMA_TODEVICE);;
- pTxD->SDLen1 = pTxBlk->SrcBufLen;
- pTxD->LastSec0 = 0;
- pTxD->LastSec1 = (bIsLast) ? 1 : 0;
-
- RTMPWriteTxDescriptor(pAd, pTxD, FALSE, FIFO_EDCA);
-
- RetTxIdx = TxIdx;
- //
- // Update Tx index
- //
- INC_RING_INDEX(TxIdx, TX_RING_SIZE);
- pTxRing->TxCpuIdx = TxIdx;
-
- *FreeNumber -= 1;
-
- return RetTxIdx;
-}
-
-
-USHORT RtmpPCI_WriteSingleTxResource(
- IN PRTMP_ADAPTER pAd,
- IN TX_BLK *pTxBlk,
- IN BOOLEAN bIsLast,
- OUT USHORT *FreeNumber)
-{
-
- UCHAR *pDMAHeaderBufVA;
- USHORT TxIdx, RetTxIdx;
- PTXD_STRUC pTxD;
- UINT32 BufBasePaLow;
- PRTMP_TX_RING pTxRing;
- USHORT hwHeaderLen;
-
- //
- // get Tx Ring Resource
- //
- pTxRing = &pAd->TxRing[pTxBlk->QueIdx];
- TxIdx = pAd->TxRing[pTxBlk->QueIdx].TxCpuIdx;
- pDMAHeaderBufVA = (PUCHAR) pTxRing->Cell[TxIdx].DmaBuf.AllocVa;
- BufBasePaLow = RTMP_GetPhysicalAddressLow(pTxRing->Cell[TxIdx].DmaBuf.AllocPa);
-
- // copy TXINFO + TXWI + WLAN Header + LLC into DMA Header Buffer
- hwHeaderLen = pTxBlk->MpduHeaderLen + pTxBlk->HdrPadLen;
-
- NdisMoveMemory(pDMAHeaderBufVA, pTxBlk->HeaderBuf, TXINFO_SIZE + TXWI_SIZE + hwHeaderLen);
-
- pTxRing->Cell[TxIdx].pNdisPacket = pTxBlk->pPacket;
- pTxRing->Cell[TxIdx].pNextNdisPacket = NULL;
-
- //
- // build Tx Descriptor
- //
- pTxD = (PTXD_STRUC) pTxRing->Cell[TxIdx].AllocVa;
-
- NdisZeroMemory(pTxD, TXD_SIZE);
-
- pTxD->SDPtr0 = BufBasePaLow;
- pTxD->SDLen0 = TXINFO_SIZE + TXWI_SIZE + hwHeaderLen; // include padding
- pTxD->SDPtr1 = PCI_MAP_SINGLE(pAd, pTxBlk, 0, 1, PCI_DMA_TODEVICE);;
- pTxD->SDLen1 = pTxBlk->SrcBufLen;
- pTxD->LastSec0 = 0;
- pTxD->LastSec1 = (bIsLast) ? 1 : 0;
-
- RTMPWriteTxDescriptor(pAd, pTxD, FALSE, FIFO_EDCA);
-
- RetTxIdx = TxIdx;
- //
- // Update Tx index
- //
- INC_RING_INDEX(TxIdx, TX_RING_SIZE);
- pTxRing->TxCpuIdx = TxIdx;
-
- *FreeNumber -= 1;
-
- return RetTxIdx;
-}
-
-
-USHORT RtmpPCI_WriteMultiTxResource(
- IN PRTMP_ADAPTER pAd,
- IN TX_BLK *pTxBlk,
- IN UCHAR frameNum,
- OUT USHORT *FreeNumber)
-{
- BOOLEAN bIsLast;
- UCHAR *pDMAHeaderBufVA;
- USHORT TxIdx, RetTxIdx;
- PTXD_STRUC pTxD;
- UINT32 BufBasePaLow;
- PRTMP_TX_RING pTxRing;
- USHORT hwHdrLen;
- UINT32 firstDMALen;
-
- bIsLast = ((frameNum == (pTxBlk->TotalFrameNum - 1)) ? 1 : 0);
-
- //
- // get Tx Ring Resource
- //
- pTxRing = &pAd->TxRing[pTxBlk->QueIdx];
- TxIdx = pAd->TxRing[pTxBlk->QueIdx].TxCpuIdx;
- pDMAHeaderBufVA = (PUCHAR) pTxRing->Cell[TxIdx].DmaBuf.AllocVa;
- BufBasePaLow = RTMP_GetPhysicalAddressLow(pTxRing->Cell[TxIdx].DmaBuf.AllocPa);
-
- if (frameNum == 0)
- {
- // copy TXINFO + TXWI + WLAN Header + LLC into DMA Header Buffer
- if (pTxBlk->TxFrameType == TX_AMSDU_FRAME)
- //hwHdrLen = ROUND_UP(pTxBlk->MpduHeaderLen-LENGTH_AMSDU_SUBFRAMEHEAD, 4)+LENGTH_AMSDU_SUBFRAMEHEAD;
- hwHdrLen = pTxBlk->MpduHeaderLen - LENGTH_AMSDU_SUBFRAMEHEAD + pTxBlk->HdrPadLen + LENGTH_AMSDU_SUBFRAMEHEAD;
- else if (pTxBlk->TxFrameType == TX_RALINK_FRAME)
- //hwHdrLen = ROUND_UP(pTxBlk->MpduHeaderLen-LENGTH_ARALINK_HEADER_FIELD, 4)+LENGTH_ARALINK_HEADER_FIELD;
- hwHdrLen = pTxBlk->MpduHeaderLen - LENGTH_ARALINK_HEADER_FIELD + pTxBlk->HdrPadLen + LENGTH_ARALINK_HEADER_FIELD;
- else
- //hwHdrLen = ROUND_UP(pTxBlk->MpduHeaderLen, 4);
- hwHdrLen = pTxBlk->MpduHeaderLen + pTxBlk->HdrPadLen;
-
- firstDMALen = TXINFO_SIZE + TXWI_SIZE + hwHdrLen;
- }
- else
- {
- firstDMALen = pTxBlk->MpduHeaderLen;
- }
-
- NdisMoveMemory(pDMAHeaderBufVA, pTxBlk->HeaderBuf, firstDMALen);
-
- pTxRing->Cell[TxIdx].pNdisPacket = pTxBlk->pPacket;
- pTxRing->Cell[TxIdx].pNextNdisPacket = NULL;
-
- //
- // build Tx Descriptor
- //
- pTxD = (PTXD_STRUC) pTxRing->Cell[TxIdx].AllocVa;
-
- NdisZeroMemory(pTxD, TXD_SIZE);
-
- pTxD->SDPtr0 = BufBasePaLow;
- pTxD->SDLen0 = firstDMALen; // include padding
- pTxD->SDPtr1 = PCI_MAP_SINGLE(pAd, pTxBlk, 0, 1, PCI_DMA_TODEVICE);;
- pTxD->SDLen1 = pTxBlk->SrcBufLen;
- pTxD->LastSec0 = 0;
- pTxD->LastSec1 = (bIsLast) ? 1 : 0;
-
- RTMPWriteTxDescriptor(pAd, pTxD, FALSE, FIFO_EDCA);
-
- RetTxIdx = TxIdx;
- //
- // Update Tx index
- //
- INC_RING_INDEX(TxIdx, TX_RING_SIZE);
- pTxRing->TxCpuIdx = TxIdx;
-
- *FreeNumber -= 1;
-
- return RetTxIdx;
-
-}
-
-
-VOID RtmpPCI_FinalWriteTxResource(
- IN PRTMP_ADAPTER pAd,
- IN TX_BLK *pTxBlk,
- IN USHORT totalMPDUSize,
- IN USHORT FirstTxIdx)
-{
-
- PTXWI_STRUC pTxWI;
- PRTMP_TX_RING pTxRing;
-
- //
- // get Tx Ring Resource
- //
- pTxRing = &pAd->TxRing[pTxBlk->QueIdx];
- pTxWI = (PTXWI_STRUC) pTxRing->Cell[FirstTxIdx].DmaBuf.AllocVa;
- pTxWI->MPDUtotalByteCount = totalMPDUSize;
-}
-
-
-VOID RtmpPCIDataLastTxIdx(
- IN PRTMP_ADAPTER pAd,
- IN UCHAR QueIdx,
- IN USHORT LastTxIdx)
-{
- PTXD_STRUC pTxD;
- PRTMP_TX_RING pTxRing;
-
- //
- // get Tx Ring Resource
- //
- pTxRing = &pAd->TxRing[QueIdx];
-
- //
- // build Tx Descriptor
- //
- pTxD = (PTXD_STRUC) pTxRing->Cell[LastTxIdx].AllocVa;
-
- pTxD->LastSec1 = 1;
-}
-
-
-USHORT RtmpPCI_WriteFragTxResource(
- IN PRTMP_ADAPTER pAd,
- IN TX_BLK *pTxBlk,
- IN UCHAR fragNum,
- OUT USHORT *FreeNumber)
-{
- UCHAR *pDMAHeaderBufVA;
- USHORT TxIdx, RetTxIdx;
- PTXD_STRUC pTxD;
- UINT32 BufBasePaLow;
- PRTMP_TX_RING pTxRing;
- USHORT hwHeaderLen;
- UINT32 firstDMALen;
-
- //
- // Get Tx Ring Resource
- //
- pTxRing = &pAd->TxRing[pTxBlk->QueIdx];
- TxIdx = pAd->TxRing[pTxBlk->QueIdx].TxCpuIdx;
- pDMAHeaderBufVA = (PUCHAR) pTxRing->Cell[TxIdx].DmaBuf.AllocVa;
- BufBasePaLow = RTMP_GetPhysicalAddressLow(pTxRing->Cell[TxIdx].DmaBuf.AllocPa);
-
- //
- // Copy TXINFO + TXWI + WLAN Header + LLC into DMA Header Buffer
- //
- hwHeaderLen = pTxBlk->MpduHeaderLen + pTxBlk->HdrPadLen;
-
- firstDMALen = TXINFO_SIZE + TXWI_SIZE + hwHeaderLen;
- NdisMoveMemory(pDMAHeaderBufVA, pTxBlk->HeaderBuf, firstDMALen);
-
-
- //
- // Build Tx Descriptor
- //
- pTxD = (PTXD_STRUC) pTxRing->Cell[TxIdx].AllocVa;
-
- NdisZeroMemory(pTxD, TXD_SIZE);
-
- if (fragNum == pTxBlk->TotalFragNum)
- {
- pTxRing->Cell[TxIdx].pNdisPacket = pTxBlk->pPacket;
- pTxRing->Cell[TxIdx].pNextNdisPacket = NULL;
- }
-
- pTxD->SDPtr0 = BufBasePaLow;
- pTxD->SDLen0 = firstDMALen; // include padding
- pTxD->SDPtr1 = PCI_MAP_SINGLE(pAd, pTxBlk, 0, 1, PCI_DMA_TODEVICE);
- pTxD->SDLen1 = pTxBlk->SrcBufLen;
- pTxD->LastSec0 = 0;
- pTxD->LastSec1 = 1;
-
- RTMPWriteTxDescriptor(pAd, pTxD, FALSE, FIFO_EDCA);
-
- RetTxIdx = TxIdx;
- pTxBlk->Priv += pTxBlk->SrcBufLen;
-
- //
- // Update Tx index
- //
- INC_RING_INDEX(TxIdx, TX_RING_SIZE);
- pTxRing->TxCpuIdx = TxIdx;
-
- *FreeNumber -= 1;
-
- return RetTxIdx;
-
-}
-
-/*
- Must be run in Interrupt context
- This function handle PCI specific TxDesc and cpu index update and kick the packet out.
- */
-int RtmpPCIMgmtKickOut(
- IN RTMP_ADAPTER *pAd,
- IN UCHAR QueIdx,
- IN PNDIS_PACKET pPacket,
- IN PUCHAR pSrcBufVA,
- IN UINT SrcBufLen)
-{
- PTXD_STRUC pTxD;
- ULONG SwIdx = pAd->MgmtRing.TxCpuIdx;
-
- pTxD = (PTXD_STRUC) pAd->MgmtRing.Cell[SwIdx].AllocVa;
- if (!pTxD)
- return 0;
-
- pAd->MgmtRing.Cell[SwIdx].pNdisPacket = pPacket;
- pAd->MgmtRing.Cell[SwIdx].pNextNdisPacket = NULL;
-
- RTMPWriteTxDescriptor(pAd, pTxD, TRUE, FIFO_MGMT);
- pTxD->LastSec0 = 1;
- pTxD->LastSec1 = 1;
- pTxD->DMADONE = 0;
- pTxD->SDLen1 = 0;
- pTxD->SDPtr0 = PCI_MAP_SINGLE(pAd, pSrcBufVA, SrcBufLen, 0, PCI_DMA_TODEVICE);;
- pTxD->SDLen0 = SrcBufLen;
-
- pAd->RalinkCounters.KickTxCount++;
- pAd->RalinkCounters.OneSecTxDoneCount++;
-
- // Increase TX_CTX_IDX, but write to register later.
- INC_RING_INDEX(pAd->MgmtRing.TxCpuIdx, MGMT_RING_SIZE);
-
- RTMP_IO_WRITE32(pAd, TX_MGMTCTX_IDX, pAd->MgmtRing.TxCpuIdx);
-
- return 0;
-}
-
-/*
- ========================================================================
-
- Routine Description:
- Check Rx descriptor, return NDIS_STATUS_FAILURE if any error dound
-
- Arguments:
- pRxD Pointer to the Rx descriptor
-
- Return Value:
- NDIS_STATUS_SUCCESS No err
- NDIS_STATUS_FAILURE Error
-
- Note:
-
- ========================================================================
-*/
-NDIS_STATUS RTMPCheckRxError(
- IN PRTMP_ADAPTER pAd,
- IN PHEADER_802_11 pHeader,
- IN PRXWI_STRUC pRxWI,
- IN PRT28XX_RXD_STRUC pRxD)
-{
- PCIPHER_KEY pWpaKey;
- INT dBm;
-
- // Phy errors & CRC errors
- if (/*(pRxD->PhyErr) ||*/ (pRxD->Crc))
- {
- // Check RSSI for Noise Hist statistic collection.
- dBm = (INT) (pRxWI->RSSI0) - pAd->BbpRssiToDbmDelta;
- if (dBm <= -87)
- pAd->StaCfg.RPIDensity[0] += 1;
- else if (dBm <= -82)
- pAd->StaCfg.RPIDensity[1] += 1;
- else if (dBm <= -77)
- pAd->StaCfg.RPIDensity[2] += 1;
- else if (dBm <= -72)
- pAd->StaCfg.RPIDensity[3] += 1;
- else if (dBm <= -67)
- pAd->StaCfg.RPIDensity[4] += 1;
- else if (dBm <= -62)
- pAd->StaCfg.RPIDensity[5] += 1;
- else if (dBm <= -57)
- pAd->StaCfg.RPIDensity[6] += 1;
- else if (dBm > -57)
- pAd->StaCfg.RPIDensity[7] += 1;
-
- return(NDIS_STATUS_FAILURE);
- }
-
- // Add Rx size to channel load counter, we should ignore error counts
- pAd->StaCfg.CLBusyBytes += (pRxD->SDL0 + 14);
-
- // Drop ToDs promiscous frame, it is opened due to CCX 2 channel load statistics
- if (pHeader != NULL)
- {
- if (pHeader->FC.ToDs)
- {
- return(NDIS_STATUS_FAILURE);
- }
- }
-
- // Drop not U2M frames, cant's drop here because we will drop beacon in this case
- // I am kind of doubting the U2M bit operation
- // if (pRxD->U2M == 0)
- // return(NDIS_STATUS_FAILURE);
-
- // drop decyption fail frame
- if (pRxD->CipherErr)
- {
- if (pRxD->CipherErr == 2)
- {DBGPRINT_RAW(RT_DEBUG_TRACE,("pRxD ERROR: ICV ok but MICErr "));}
- else if (pRxD->CipherErr == 1)
- {DBGPRINT_RAW(RT_DEBUG_TRACE,("pRxD ERROR: ICV Err "));}
- else if (pRxD->CipherErr == 3)
- DBGPRINT_RAW(RT_DEBUG_TRACE,("pRxD ERROR: Key not valid "));
-
- if (((pRxD->CipherErr & 1) == 1) && pAd->CommonCfg.bWirelessEvent && INFRA_ON(pAd))
- RTMPSendWirelessEvent(pAd, IW_ICV_ERROR_EVENT_FLAG, pAd->MacTab.Content[BSSID_WCID].Addr, BSS0, 0);
-
- DBGPRINT_RAW(RT_DEBUG_TRACE,(" %d (len=%d, Mcast=%d, MyBss=%d, Wcid=%d, KeyId=%d)\n",
- pRxD->CipherErr,
- pRxD->SDL0,
- pRxD->Mcast | pRxD->Bcast,
- pRxD->MyBss,
- pRxWI->WirelessCliID,
- pRxWI->KeyIndex));
-
- //
- // MIC Error
- //
- if (pRxD->CipherErr == 2)
- {
- pWpaKey = &pAd->SharedKey[BSS0][pRxWI->KeyIndex];
-
- if (pAd->StaCfg.WpaSupplicantUP)
- WpaSendMicFailureToWpaSupplicant(pAd,
- (pWpaKey->Type == PAIRWISEKEY) ? TRUE:FALSE);
- else
- RTMPReportMicError(pAd, pWpaKey);
-
- if (((pRxD->CipherErr & 2) == 2) && pAd->CommonCfg.bWirelessEvent && INFRA_ON(pAd))
- RTMPSendWirelessEvent(pAd, IW_MIC_ERROR_EVENT_FLAG, pAd->MacTab.Content[BSSID_WCID].Addr, BSS0, 0);
-
- DBGPRINT_RAW(RT_DEBUG_ERROR,("Rx MIC Value error\n"));
- }
-
- if (pHeader == NULL)
- return(NDIS_STATUS_SUCCESS);
-
- return(NDIS_STATUS_FAILURE);
- }
-
- return(NDIS_STATUS_SUCCESS);
-}
-
-/*
- ==========================================================================
- Description:
- This routine sends command to firmware and turn our chip to power save mode.
- Both RadioOff and .11 power save function needs to call this routine.
- Input:
- Level = GUIRADIO_OFF : GUI Radio Off mode
- Level = DOT11POWERSAVE : 802.11 power save mode
- Level = RTMP_HALT : When Disable device.
-
- ==========================================================================
- */
-VOID RT28xxPciAsicRadioOff(
- IN PRTMP_ADAPTER pAd,
- IN UCHAR Level,
- IN USHORT TbttNumToNextWakeUp)
-{
- WPDMA_GLO_CFG_STRUC DmaCfg;
- UCHAR i, tempBBP_R3 = 0;
- BOOLEAN brc = FALSE, Cancelled;
- UINT32 TbTTTime = 0;
- UINT32 PsPollTime = 0, MACValue;
- ULONG BeaconPeriodTime;
- UINT32 RxDmaIdx, RxCpuIdx;
- DBGPRINT(RT_DEBUG_TRACE, ("AsicRadioOff ===> TxCpuIdx = %d, TxDmaIdx = %d. RxCpuIdx = %d, RxDmaIdx = %d.\n", pAd->TxRing[0].TxCpuIdx, pAd->TxRing[0].TxDmaIdx, pAd->RxRing.RxCpuIdx, pAd->RxRing.RxDmaIdx));
-
- // Check Rx DMA busy status, if more than half is occupied, give up this radio off.
- RTMP_IO_READ32(pAd, RX_DRX_IDX , &RxDmaIdx);
- RTMP_IO_READ32(pAd, RX_CRX_IDX , &RxCpuIdx);
- if ((RxDmaIdx > RxCpuIdx) && ((RxDmaIdx - RxCpuIdx) > RX_RING_SIZE/3))
- {
- DBGPRINT(RT_DEBUG_TRACE, ("AsicRadioOff ===> return1. RxDmaIdx = %d , RxCpuIdx = %d. \n", RxDmaIdx, RxCpuIdx));
- return;
- }
- else if ((RxCpuIdx >= RxDmaIdx) && ((RxCpuIdx - RxDmaIdx) < RX_RING_SIZE/3))
- {
- DBGPRINT(RT_DEBUG_TRACE, ("AsicRadioOff ===> return2. RxCpuIdx = %d. RxDmaIdx = %d , \n", RxCpuIdx, RxDmaIdx));
- return;
- }
-
- // Once go into this function, disable tx because don't want too many packets in queue to prevent HW stops.
- RTMP_SET_PSFLAG(pAd, fRTMP_PS_DISABLE_TX);
-
- if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_ADVANCE_POWER_SAVE_PCIE_DEVICE))
- {
- RTMPCancelTimer(&pAd->Mlme.RadioOnOffTimer, &Cancelled);
- RTMPCancelTimer(&pAd->Mlme.PsPollTimer, &Cancelled);
-
- if (Level == DOT11POWERSAVE)
- {
- RTMP_IO_READ32(pAd, TBTT_TIMER, &TbTTTime);
- TbTTTime &= 0x1ffff;
- // 00. check if need to do sleep in this DTIM period. If next beacon will arrive within 30ms , ...doesn't necessarily sleep.
- // TbTTTime uint = 64us, LEAD_TIME unit = 1024us, PsPollTime unit = 1ms
- if (((64*TbTTTime) <((LEAD_TIME*1024) + 40000)) && (TbttNumToNextWakeUp == 0))
- {
- DBGPRINT(RT_DEBUG_TRACE, ("TbTTTime = 0x%x , give up this sleep. \n", TbTTTime));
- OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_DOZE);
- RTMP_CLEAR_PSFLAG(pAd, fRTMP_PS_DISABLE_TX);
- return;
- }
- else
- {
- PsPollTime = (64*TbTTTime- LEAD_TIME*1024)/1000;
- PsPollTime -= 3;
-
- BeaconPeriodTime = pAd->CommonCfg.BeaconPeriod*102/100;
- if (TbttNumToNextWakeUp > 0)
- PsPollTime += ((TbttNumToNextWakeUp -1) * BeaconPeriodTime);
-
- pAd->Mlme.bPsPollTimerRunning = TRUE;
- RTMPSetTimer(&pAd->Mlme.PsPollTimer, PsPollTime);
- }
- }
- }
-
- // 0. Disable Tx DMA.
- RTMP_IO_READ32(pAd, WPDMA_GLO_CFG, &DmaCfg.word);
- DmaCfg.field.EnableTxDMA = 0;
- RTMP_IO_WRITE32(pAd, WPDMA_GLO_CFG, DmaCfg.word);
-
- // 1. Wait DMA not busy
- i = 0;
- do
- {
- RTMP_IO_READ32(pAd, WPDMA_GLO_CFG, &DmaCfg.word);
- if ((DmaCfg.field.TxDMABusy == 0) && (DmaCfg.field.RxDMABusy == 0))
- break;
- RTMPusecDelay(20);
- i++;
- }while(i < 50);
-
- if (i >= 50)
- {
- DBGPRINT(RT_DEBUG_TRACE, ("DMA keeps busy. return on RT28xxPciAsicRadioOff ()\n"));
- RTMP_IO_READ32(pAd, WPDMA_GLO_CFG, &DmaCfg.word);
- DmaCfg.field.EnableTxDMA = 1;
- RTMP_IO_WRITE32(pAd, WPDMA_GLO_CFG, DmaCfg.word);
- pAd->CheckDmaBusyCount++;
- return;
- }
- else
- {
- pAd->CheckDmaBusyCount = 0;
- }
-
- RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_IDLE_RADIO_OFF);
-
- // Set to 1R.
- if (pAd->Antenna.field.RxPath > 1)
- {
- tempBBP_R3 = (pAd->StaCfg.BBPR3 & 0xE7);
- RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, tempBBP_R3);
- }
-
- // In Radio Off, we turn off RF clk, So now need to call ASICSwitchChannel again.
- if (INFRA_ON(pAd) && (pAd->CommonCfg.CentralChannel != pAd->CommonCfg.Channel)
- && (pAd->MlmeAux.HtCapability.HtCapInfo.ChannelWidth == BW_40))
- {
- // Must using 40MHz.
- AsicTurnOffRFClk(pAd, pAd->CommonCfg.CentralChannel);
- }
- else
- {
- // Must using 20MHz.
- AsicTurnOffRFClk(pAd, pAd->CommonCfg.Channel);
- }
-
- if (Level != RTMP_HALT)
- {
- // Change Interrupt bitmask.
- RTMP_IO_WRITE32(pAd, INT_MASK_CSR, AutoWakeupInt);
- }
- else
- {
- NICDisableInterrupt(pAd);
- }
-
- RTMP_IO_WRITE32(pAd, RX_CRX_IDX, pAd->RxRing.RxCpuIdx);
- // Disable MAC Rx
- RTMP_IO_READ32(pAd, MAC_SYS_CTRL , &MACValue);
- MACValue &= 0xf7;
- RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL , MACValue);
-
- // 2. Send Sleep command
- RTMP_IO_WRITE32(pAd, H2M_MAILBOX_STATUS, 0xffffffff);
- RTMP_IO_WRITE32(pAd, H2M_MAILBOX_CID, 0xffffffff);
- // send POWER-SAVE command to MCU. high-byte = 1 save power as much as possible. high byte = 0 save less power
- AsicSendCommandToMcu(pAd, 0x30, PowerSafeCID, 0xff, 0x1);
- // 2-1. Wait command success
- // Status = 1 : success, Status = 2, already sleep, Status = 3, Maybe MAC is busy so can't finish this task.
- brc = AsicCheckCommanOk(pAd, PowerSafeCID);
-
- if (brc == FALSE)
- {
- // try again
- AsicSendCommandToMcu(pAd, 0x30, PowerSafeCID, 0xff, 0x01); // send POWER-SAVE command to MCU. Timeout unit:40us.
- //RTMPusecDelay(200);
- brc = AsicCheckCommanOk(pAd, PowerSafeCID);
- }
-
- // 3. After 0x30 command is ok, send radio off command. lowbyte = 0 for power safe.
- // If 0x30 command is not ok this time, we can ignore 0x35 command. It will make sure not cause firmware'r problem.
- if ((Level == DOT11POWERSAVE) && (brc == TRUE))
- {
- AsicSendCommandToMcu(pAd, 0x35, PowerRadioOffCID, 0, 0x00); // lowbyte = 0 means to do power safe, NOT turn off radio.
- // 3-1. Wait command success
- AsicCheckCommanOk(pAd, PowerRadioOffCID);
- }
- else if (brc == TRUE)
- {
- AsicSendCommandToMcu(pAd, 0x35, PowerRadioOffCID, 1, 0x00); // lowbyte = 0 means to do power safe, NOT turn off radio.
- // 3-1. Wait command success
- AsicCheckCommanOk(pAd, PowerRadioOffCID);
- }
-
- // Wait DMA not busy
- i = 0;
- do
- {
- RTMP_IO_READ32(pAd, WPDMA_GLO_CFG, &DmaCfg.word);
- if ((DmaCfg.field.RxDMABusy == 0) && (DmaCfg.field.TxDMABusy == 0))
- break;
- RTMPusecDelay(20);
- i++;
- }while(i < 50);
-
- if (i >= 50)
- {
- pAd->CheckDmaBusyCount++;
- DBGPRINT(RT_DEBUG_TRACE, ("DMA Rx keeps busy. on RT28xxPciAsicRadioOff ()\n"));
- }
- else
- {
- pAd->CheckDmaBusyCount = 0;
- }
-
- if (Level == DOT11POWERSAVE)
- {
- AUTO_WAKEUP_STRUC AutoWakeupCfg;
- //RTMPSetTimer(&pAd->Mlme.PsPollTimer, 90);
-
- // we have decided to SLEEP, so at least do it for a BEACON period.
- if (TbttNumToNextWakeUp == 0)
- TbttNumToNextWakeUp = 1;
-
- AutoWakeupCfg.word = 0;
- RTMP_IO_WRITE32(pAd, AUTO_WAKEUP_CFG, AutoWakeupCfg.word);
-
- // 1. Set auto wake up timer.
- AutoWakeupCfg.field.NumofSleepingTbtt = TbttNumToNextWakeUp - 1;
- AutoWakeupCfg.field.EnableAutoWakeup = 1;
- AutoWakeupCfg.field.AutoLeadTime = LEAD_TIME;
- RTMP_IO_WRITE32(pAd, AUTO_WAKEUP_CFG, AutoWakeupCfg.word);
- }
-
- // 4-1. If it's to disable our device. Need to restore PCI Configuration Space to its original value.
- if (Level == RTMP_HALT)
- {
- if ((brc == TRUE) && (i < 50))
- RTMPPCIeLinkCtrlSetting(pAd, 0);
- }
- // 4. Set PCI configuration Space Link Comtrol fields. Only Radio Off needs to call this function
- else
- {
- if ((brc == TRUE) && (i < 50))
- RTMPPCIeLinkCtrlSetting(pAd, 3);
- }
-
- RTMP_CLEAR_PSFLAG(pAd, fRTMP_PS_DISABLE_TX);
-}
-
-
-/*
- ==========================================================================
- Description:
- This routine sends command to firmware and turn our chip to wake up mode from power save mode.
- Both RadioOn and .11 power save function needs to call this routine.
- Input:
- Level = GUIRADIO_OFF : call this function is from Radio Off to Radio On. Need to restore PCI host value.
- Level = other value : normal wake up function.
-
- ==========================================================================
- */
-BOOLEAN RT28xxPciAsicRadioOn(
- IN PRTMP_ADAPTER pAd,
- IN UCHAR Level)
-{
- WPDMA_GLO_CFG_STRUC DmaCfg;
- BOOLEAN Cancelled, brv = TRUE;
- UINT32 MACValue;
-
- if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_ADVANCE_POWER_SAVE_PCIE_DEVICE))
- {
- pAd->Mlme.bPsPollTimerRunning = FALSE;
- RTMPCancelTimer(&pAd->Mlme.PsPollTimer, &Cancelled);
- if ((Level == GUIRADIO_OFF) || (Level == GUI_IDLE_POWER_SAVE)
- || (RTMP_TEST_PSFLAG(pAd, fRTMP_PS_SET_PCI_CLK_OFF_COMMAND)))
- {
- DBGPRINT(RT_DEBUG_TRACE, ("RT28xxPciAsicRadioOn ()\n"));
- // 1. Set PCI Link Control in Configuration Space.
- RTMPPCIeLinkCtrlValueRestore(pAd, RESTORE_WAKEUP);
- RTMPusecDelay(6000);
- }
- }
-
- pAd->bPCIclkOff = FALSE;
- RTMP_IO_WRITE32(pAd, PBF_SYS_CTRL, 0x3a80);
- // 2. Send wake up command.
- AsicSendCommandToMcu(pAd, 0x31, PowerWakeCID, 0x00, 0x02);
-
- // 2-1. wait command ok.
- brv = AsicCheckCommanOk(pAd, PowerWakeCID);
- if (brv)
- {
- NICEnableInterrupt(pAd);
-
- // 3. Enable Tx DMA.
- RTMP_IO_READ32(pAd, WPDMA_GLO_CFG, &DmaCfg.word);
- DmaCfg.field.EnableTxDMA = 1;
- DmaCfg.field.EnableRxDMA = 1;
- RTMP_IO_WRITE32(pAd, WPDMA_GLO_CFG, DmaCfg.word);
-
- // Eable MAC Rx
- RTMP_IO_READ32(pAd, MAC_SYS_CTRL , &MACValue);
- MACValue |= 0x8;
- RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL , MACValue);
-
- RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_IDLE_RADIO_OFF);
- if (Level == GUI_IDLE_POWER_SAVE)
- {
- // In Radio Off, we turn off RF clk, So now need to call ASICSwitchChannel again.
- if (INFRA_ON(pAd) && (pAd->CommonCfg.CentralChannel != pAd->CommonCfg.Channel)
- && (pAd->MlmeAux.HtCapability.HtCapInfo.ChannelWidth == BW_40))
- {
- // Must using 40MHz.
- AsicSwitchChannel(pAd, pAd->CommonCfg.CentralChannel, FALSE);
- AsicLockChannel(pAd, pAd->CommonCfg.CentralChannel);
- }
- else
- {
- // Must using 20MHz.
- AsicSwitchChannel(pAd, pAd->CommonCfg.Channel, FALSE);
- AsicLockChannel(pAd, pAd->CommonCfg.Channel);
- }
- }
- return TRUE;
- }
- else
- return FALSE;
-}
-
-VOID RT28xxPciStaAsicForceWakeup(
- IN PRTMP_ADAPTER pAd,
- IN UCHAR Level)
-{
- AUTO_WAKEUP_STRUC AutoWakeupCfg;
-
- if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_WAKEUP_NOW))
- {
- DBGPRINT(RT_DEBUG_TRACE, ("waking up now!\n"));
- return;
- }
-
- OPSTATUS_SET_FLAG(pAd, fOP_STATUS_WAKEUP_NOW);
- RTMP_CLEAR_PSFLAG(pAd, fRTMP_PS_GO_TO_SLEEP_NOW);
-
- if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_ADVANCE_POWER_SAVE_PCIE_DEVICE))
- {
- // Support PCIe Advance Power Save
- if (((Level == FROM_TX) && (pAd->Mlme.bPsPollTimerRunning == TRUE)) ||
- (Level == RTMP_HALT))
- {
- pAd->Mlme.bPsPollTimerRunning = FALSE;
- RTMPPCIeLinkCtrlValueRestore(pAd, RESTORE_WAKEUP);
- RTMPusecDelay(5000);
- DBGPRINT(RT_DEBUG_TRACE, ("=======AsicForceWakeup===bFromTx\n"));
- }
-
- AutoWakeupCfg.word = 0;
- RTMP_IO_WRITE32(pAd, AUTO_WAKEUP_CFG, AutoWakeupCfg.word);
-
- // If this is called from Halt. ALWAYS force wakeup!
- if (Level == RTMP_HALT)
- {
- RT28xxPciAsicRadioOn(pAd, RTMP_HALT);
- }
- else
- {
- if (RT28xxPciAsicRadioOn(pAd, DOT11POWERSAVE))
- {
- // In Radio Off, we turn off RF clk, So now need to call ASICSwitchChannel again.
- if (INFRA_ON(pAd) && (pAd->CommonCfg.CentralChannel != pAd->CommonCfg.Channel)
- && (pAd->MlmeAux.HtCapability.HtCapInfo.ChannelWidth == BW_40))
- {
- // Must using 40MHz.
- AsicSwitchChannel(pAd, pAd->CommonCfg.CentralChannel, FALSE);
- AsicLockChannel(pAd, pAd->CommonCfg.CentralChannel);
- }
- else
- {
- // Must using 20MHz.
- AsicSwitchChannel(pAd, pAd->CommonCfg.Channel, FALSE);
- AsicLockChannel(pAd, pAd->CommonCfg.Channel);
- }
- }
- }
- }
- else
- {
- // PCI, 2860-PCIe
- AsicSendCommandToMcu(pAd, 0x31, 0xff, 0x00, 0x00);
- AutoWakeupCfg.word = 0;
- RTMP_IO_WRITE32(pAd, AUTO_WAKEUP_CFG, AutoWakeupCfg.word);
- }
-
- OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_DOZE);
- OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_WAKEUP_NOW);
- DBGPRINT(RT_DEBUG_TRACE, ("<=======RT28xxPciStaAsicForceWakeup\n"));
-}
-
-VOID RT28xxPciStaAsicSleepThenAutoWakeup(
- IN PRTMP_ADAPTER pAd,
- IN USHORT TbttNumToNextWakeUp)
-{
- if (pAd->StaCfg.bRadio == FALSE)
- {
- OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_DOZE);
- return;
- }
- if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_ADVANCE_POWER_SAVE_PCIE_DEVICE))
- {
- ULONG Now = 0;
- if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_WAKEUP_NOW))
- {
- DBGPRINT(RT_DEBUG_TRACE, ("waking up now!\n"));
- OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_DOZE);
- return;
- }
-
- NdisGetSystemUpTime(&Now);
- // If last send NULL fram time is too close to this receiving beacon (within 8ms), don't go to sleep for this DTM.
- // Because Some AP can't queuing outgoing frames immediately.
- if (((pAd->Mlme.LastSendNULLpsmTime + 8) >= Now) && (pAd->Mlme.LastSendNULLpsmTime <= Now))
- {
- DBGPRINT(RT_DEBUG_TRACE, ("Now = %lu, LastSendNULLpsmTime=%lu : RxCountSinceLastNULL = %lu. \n", Now, pAd->Mlme.LastSendNULLpsmTime, pAd->RalinkCounters.RxCountSinceLastNULL));
- return;
- }
- else if ((pAd->RalinkCounters.RxCountSinceLastNULL > 0) && ((pAd->Mlme.LastSendNULLpsmTime + pAd->CommonCfg.BeaconPeriod) >= Now))
- {
- DBGPRINT(RT_DEBUG_TRACE, ("Now = %lu, LastSendNULLpsmTime=%lu: RxCountSinceLastNULL = %lu > 0 \n", Now, pAd->Mlme.LastSendNULLpsmTime, pAd->RalinkCounters.RxCountSinceLastNULL));
- return;
- }
-
- RT28xxPciAsicRadioOff(pAd, DOT11POWERSAVE, TbttNumToNextWakeUp);
- }
- else
- {
- AUTO_WAKEUP_STRUC AutoWakeupCfg;
- // we have decided to SLEEP, so at least do it for a BEACON period.
- if (TbttNumToNextWakeUp == 0)
- TbttNumToNextWakeUp = 1;
-
- AutoWakeupCfg.word = 0;
- RTMP_IO_WRITE32(pAd, AUTO_WAKEUP_CFG, AutoWakeupCfg.word);
- AutoWakeupCfg.field.NumofSleepingTbtt = TbttNumToNextWakeUp - 1;
- AutoWakeupCfg.field.EnableAutoWakeup = 1;
- AutoWakeupCfg.field.AutoLeadTime = 5;
- RTMP_IO_WRITE32(pAd, AUTO_WAKEUP_CFG, AutoWakeupCfg.word);
- AsicSendCommandToMcu(pAd, 0x30, 0xff, 0xff, 0x00); // send POWER-SAVE command to MCU. Timeout 40us.
- DBGPRINT(RT_DEBUG_TRACE, ("<-- %s, TbttNumToNextWakeUp=%d \n", __func__, TbttNumToNextWakeUp));
- }
- OPSTATUS_SET_FLAG(pAd, fOP_STATUS_DOZE);
-}
-
-VOID PsPollWakeExec(
- IN PVOID SystemSpecific1,
- IN PVOID FunctionContext,
- IN PVOID SystemSpecific2,
- IN PVOID SystemSpecific3)
-{
- RTMP_ADAPTER *pAd = (RTMP_ADAPTER *)FunctionContext;
- unsigned long flags;
-
- DBGPRINT(RT_DEBUG_TRACE,("-->PsPollWakeExec \n"));
- RTMP_INT_LOCK(&pAd->irq_lock, flags);
- if (pAd->Mlme.bPsPollTimerRunning)
- {
- RTMPPCIeLinkCtrlValueRestore(pAd, RESTORE_WAKEUP);
- }
- pAd->Mlme.bPsPollTimerRunning = FALSE;
- RTMP_INT_UNLOCK(&pAd->irq_lock, flags);
-}
-
-VOID RadioOnExec(
- IN PVOID SystemSpecific1,
- IN PVOID FunctionContext,
- IN PVOID SystemSpecific2,
- IN PVOID SystemSpecific3)
-{
- RTMP_ADAPTER *pAd = (RTMP_ADAPTER *)FunctionContext;
- WPDMA_GLO_CFG_STRUC DmaCfg;
- BOOLEAN Cancelled;
-
- if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE))
- {
- DBGPRINT(RT_DEBUG_TRACE,("-->RadioOnExec() return on fOP_STATUS_DOZE == TRUE; \n"));
- RTMPSetTimer(&pAd->Mlme.RadioOnOffTimer, 10);
- return;
- }
-
- if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS))
- {
- DBGPRINT(RT_DEBUG_TRACE,("-->RadioOnExec() return on SCAN_IN_PROGRESS; \n"));
- RTMPSetTimer(&pAd->Mlme.RadioOnOffTimer, 10);
- return;
- }
- pAd->Mlme.bPsPollTimerRunning = FALSE;
- RTMPCancelTimer(&pAd->Mlme.PsPollTimer, &Cancelled);
- if (pAd->StaCfg.bRadio == TRUE)
- {
- pAd->bPCIclkOff = FALSE;
- RTMPRingCleanUp(pAd, QID_AC_BK);
- RTMPRingCleanUp(pAd, QID_AC_BE);
- RTMPRingCleanUp(pAd, QID_AC_VI);
- RTMPRingCleanUp(pAd, QID_AC_VO);
- RTMPRingCleanUp(pAd, QID_HCCA);
- RTMPRingCleanUp(pAd, QID_MGMT);
- RTMPRingCleanUp(pAd, QID_RX);
-
- // 2. Send wake up command.
- AsicSendCommandToMcu(pAd, 0x31, PowerWakeCID, 0x00, 0x02);
- // 2-1. wait command ok.
- AsicCheckCommanOk(pAd, PowerWakeCID);
-
- // When PCI clock is off, don't want to service interrupt. So when back to clock on, enable interrupt.
- NICEnableInterrupt(pAd);
-
- // 3. Enable Tx DMA.
- RTMP_IO_READ32(pAd, WPDMA_GLO_CFG, &DmaCfg.word);
- DmaCfg.field.EnableTxDMA = 1;
- RTMP_IO_WRITE32(pAd, WPDMA_GLO_CFG, DmaCfg.word);
-
- // In Radio Off, we turn off RF clk, So now need to call ASICSwitchChannel again.
- if (INFRA_ON(pAd) && (pAd->CommonCfg.CentralChannel != pAd->CommonCfg.Channel)
- && (pAd->MlmeAux.HtCapability.HtCapInfo.ChannelWidth == BW_40))
- {
- // Must using 40MHz.
- AsicSwitchChannel(pAd, pAd->CommonCfg.CentralChannel, FALSE);
- AsicLockChannel(pAd, pAd->CommonCfg.CentralChannel);
- }
- else
- {
- // Must using 20MHz.
- AsicSwitchChannel(pAd, pAd->CommonCfg.Channel, FALSE);
- AsicLockChannel(pAd, pAd->CommonCfg.Channel);
- }
-
- // Clear Radio off flag
- RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_RADIO_OFF);
-
- // Set LED
- RTMPSetLED(pAd, LED_RADIO_ON);
-
- if (pAd->StaCfg.Psm == PWR_ACTIVE)
- {
- RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, pAd->StaCfg.BBPR3);
- }
- }
- else
- {
- RT28xxPciAsicRadioOff(pAd, GUIRADIO_OFF, 0);
- }
-}
-
-VOID RT28xxPciMlmeRadioOn(
- IN PRTMP_ADAPTER pAd)
-{
- if (!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_RADIO_OFF))
- return;
-
- DBGPRINT(RT_DEBUG_TRACE,("%s===>\n", __func__));
-
- if ((pAd->OpMode == OPMODE_AP) ||
- ((pAd->OpMode == OPMODE_STA) && (!OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_ADVANCE_POWER_SAVE_PCIE_DEVICE))))
- {
- NICResetFromError(pAd);
-
- /*
- RTMPRingCleanUp(pAd, QID_AC_BK);
- RTMPRingCleanUp(pAd, QID_AC_BE);
- RTMPRingCleanUp(pAd, QID_AC_VI);
- RTMPRingCleanUp(pAd, QID_AC_VO);
- RTMPRingCleanUp(pAd, QID_HCCA);
- RTMPRingCleanUp(pAd, QID_MGMT);
- RTMPRingCleanUp(pAd, QID_RX);
- */
-
- // Enable Tx/Rx
- RTMPEnableRxTx(pAd);
-
- // Clear Radio off flag
- RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_RADIO_OFF);
-
- // Set LED
- RTMPSetLED(pAd, LED_RADIO_ON);
- }
-
- if ((pAd->OpMode == OPMODE_STA) &&
- (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_ADVANCE_POWER_SAVE_PCIE_DEVICE)))
- {
- BOOLEAN Cancelled;
-
- RTMPPCIeLinkCtrlValueRestore(pAd, RESTORE_WAKEUP);
-
- pAd->Mlme.bPsPollTimerRunning = FALSE;
- RTMPCancelTimer(&pAd->Mlme.PsPollTimer, &Cancelled);
- RTMPCancelTimer(&pAd->Mlme.RadioOnOffTimer, &Cancelled);
- RTMPSetTimer(&pAd->Mlme.RadioOnOffTimer, 10);
- }
-}
-
-VOID RT28xxPciMlmeRadioOFF(
- IN PRTMP_ADAPTER pAd)
-{
- WPDMA_GLO_CFG_STRUC GloCfg;
- UINT32 i;
-
- if (pAd->StaCfg.bRadio == TRUE)
- {
- DBGPRINT(RT_DEBUG_TRACE,("-->MlmeRadioOff() return on bRadio == TRUE; \n"));
- return;
- }
-
- if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_RADIO_OFF))
- return;
-
- DBGPRINT(RT_DEBUG_TRACE,("%s===>\n", __func__));
-
- // Set LED
- RTMPSetLED(pAd, LED_RADIO_OFF);
-
- {
- BOOLEAN Cancelled;
-
- if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS))
- {
- RTMPCancelTimer(&pAd->MlmeAux.ScanTimer, &Cancelled);
- RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS);
- }
-
- if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_ADVANCE_POWER_SAVE_PCIE_DEVICE))
- {
- BOOLEAN Cancelled;
-
- // Always radio on since the NIC needs to set the MCU command (LED_RADIO_OFF).\r
- if ((pAd->OpMode == OPMODE_STA) && \r
- (IDLE_ON(pAd)) && \r
- (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_IDLE_RADIO_OFF)))\r
- {\r
- RT28xxPciAsicRadioOn(pAd, GUI_IDLE_POWER_SAVE);\r
- }
-
- pAd->Mlme.bPsPollTimerRunning = FALSE;
- RTMPCancelTimer(&pAd->Mlme.PsPollTimer, &Cancelled);
- RTMPCancelTimer(&pAd->Mlme.RadioOnOffTimer, &Cancelled);
- }
-
- // Link down first if any association exists
- if (INFRA_ON(pAd) || ADHOC_ON(pAd))
- LinkDown(pAd, FALSE);
- RTMPusecDelay(10000);
- //==========================================
- // Clean up old bss table
- BssTableInit(&pAd->ScanTab);
-
- RTMPRingCleanUp(pAd, QID_AC_BK);
- RTMPRingCleanUp(pAd, QID_AC_BE);
- RTMPRingCleanUp(pAd, QID_AC_VI);
- RTMPRingCleanUp(pAd, QID_AC_VO);
- RTMPRingCleanUp(pAd, QID_HCCA);
- RTMPRingCleanUp(pAd, QID_MGMT);
- RTMPRingCleanUp(pAd, QID_RX);
-
- if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_ADVANCE_POWER_SAVE_PCIE_DEVICE))
- {
- RTMPSetTimer(&pAd->Mlme.RadioOnOffTimer, 500);
- return;
- }
- }
-
- // Set Radio off flag
- RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_RADIO_OFF);
-
- // Disable Tx/Rx DMA
- RTMP_IO_READ32(pAd, WPDMA_GLO_CFG, &GloCfg.word); // disable DMA
- GloCfg.field.EnableTxDMA = 0;
- GloCfg.field.EnableRxDMA = 0;
- RTMP_IO_WRITE32(pAd, WPDMA_GLO_CFG, GloCfg.word); // abort all TX rings
-
-
- // MAC_SYS_CTRL => value = 0x0 => 40mA
- RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, 0);
-
- // PWR_PIN_CFG => value = 0x0 => 40mA
- RTMP_IO_WRITE32(pAd, PWR_PIN_CFG, 0);
-
- // TX_PIN_CFG => value = 0x0 => 20mA
- RTMP_IO_WRITE32(pAd, TX_PIN_CFG, 0);
-
- if (pAd->CommonCfg.BBPCurrentBW == BW_40)
- {
- // Must using 40MHz.
- AsicTurnOffRFClk(pAd, pAd->CommonCfg.CentralChannel);
- }
- else
- {
- // Must using 20MHz.
- AsicTurnOffRFClk(pAd, pAd->CommonCfg.Channel);
- }
-
- // Waiting for DMA idle
- i = 0;
- do
- {
- RTMP_IO_READ32(pAd, WPDMA_GLO_CFG, &GloCfg.word);
- if ((GloCfg.field.TxDMABusy == 0) && (GloCfg.field.RxDMABusy == 0))
- break;
-
- RTMPusecDelay(1000);
- }while (i++ < 100);
-}
git://bbs.cooldavid.org / net-next-2.6.git / commitdiff