compatible = "fsl,mpc875-brg",
"fsl,cpm1-brg",
"fsl,cpm-brg";
+ clock-frequency = <50000000>;
reg = <0x9f0 0x10>;
};
compatible = "fsl,mpc875-brg",
"fsl,cpm1-brg",
"fsl,cpm-brg";
+ clock-frequency = <50000000>;
reg = <0x9f0 0x10>;
};
interrupts = <14 0x8>;
interrupt-parent = <&ipic>;
dfsrr;
+ rtc@68 {
+ compatible = "dallas,ds1339";
+ reg = <0x68>;
+ };
};
i2c@3100 {
#address-cells = <1>;
#size-cells = <1>;
device_type = "soc";
- compatible = "simple-bus";
+ compatible = "fsl,mpc8315-immr", "simple-bus";
ranges = <0 0xe0000000 0x00100000>;
reg = <0xe0000000 0x00000200>;
bus-frequency = <0>;
0xc000 0x0 0x0 0x3 &ipic 23 0x8
0xc000 0x0 0x0 0x4 &ipic 20 0x8>;
interrupt-parent = <&ipic>;
- interrupts = <66 0x8>;
+ interrupts = <67 0x8>;
bus-range = <0 0>;
ranges = <0x02000000 0x0 0xb0000000 0xb0000000 0x0 0x10000000
0x42000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000
bus-frequency = <0>;
clock-frequency = <0>;
};
+
+ PowerPC,8572@1 {
+ device_type = "cpu";
+ reg = <1>;
+ d-cache-line-size = <20>; // 32 bytes
+ i-cache-line-size = <20>; // 32 bytes
+ d-cache-size = <8000>; // L1, 32K
+ i-cache-size = <8000>; // L1, 32K
+ timebase-frequency = <0>;
+ bus-frequency = <0>;
+ clock-frequency = <0>;
+ };
};
memory {
compatible = "fsl,mpc885-brg",
"fsl,cpm1-brg",
"fsl,cpm-brg";
+ clock-frequency = <0>;
reg = <9f0 10>;
};
/ {
model = "StorCenter";
- compatible = "storcenter";
+ compatible = "iomega,storcenter";
#address-cells = <1>;
#size-cells = <1>;
#size-cells = <0>;
compatible = "fsl-i2c";
reg = <0x3000 0x100>;
- interrupts = <5 2>;
+ interrupts = <17 2>;
interrupt-parent = <&mpic>;
rtc@68 {
compatible = "dallas,ds1337";
- reg = <68>;
+ reg = <0x68>;
};
};
reg = <0x4500 0x20>;
clock-frequency = <97553800>; /* Hz */
current-speed = <115200>;
- interrupts = <9 2>;
+ interrupts = <25 2>;
interrupt-parent = <&mpic>;
};
reg = <0x4600 0x20>;
clock-frequency = <97553800>; /* Hz */
current-speed = <9600>;
- interrupts = <10 2>;
+ interrupts = <26 2>;
interrupt-parent = <&mpic>;
};
};
chosen {
- linux,stdout-path = "/soc/serial@4500";
+ linux,stdout-path = &serial0;
};
};
# CONFIG_PREEMPT is not set
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
-# CONFIG_MATH_EMULATION is not set
+CONFIG_MATH_EMULATION=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
# MII PHY device drivers
#
CONFIG_MARVELL_PHY=y
-# CONFIG_DAVICOM_PHY is not set
+CONFIG_DAVICOM_PHY=y
# CONFIG_QSEMI_PHY is not set
# CONFIG_LXT_PHY is not set
# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
+CONFIG_VITESSE_PHY=y
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
+CONFIG_ICPLUS_PHY=y
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_NETDEV_1000=y
CONFIG_GIANFAR=y
# CONFIG_GFAR_NAPI is not set
-# CONFIG_UCC_GETH is not set
+CONFIG_UCC_GETH=y
CONFIG_NETDEV_10000=y
#
.icache_bsize = 32,
.dcache_bsize = 32,
.cpu_setup = __setup_cpu_603,
+ .num_pmcs = 4,
+ .oprofile_cpu_type = "ppc/e300",
+ .oprofile_type = PPC_OPROFILE_FSL_EMB,
.platform = "ppc603",
},
{ /* e300c4 (e300c1, plus one IU) */
.dcache_bsize = 32,
.cpu_setup = __setup_cpu_603,
.machine_check = machine_check_generic,
+ .num_pmcs = 4,
+ .oprofile_cpu_type = "ppc/e300",
+ .oprofile_type = PPC_OPROFILE_FSL_EMB,
.platform = "ppc603",
},
{ /* default match, we assume split I/D cache & TB (non-601)... */
.dcache_bsize = 32,
.num_pmcs = 4,
.oprofile_cpu_type = "ppc/e500",
- .oprofile_type = PPC_OPROFILE_BOOKE,
+ .oprofile_type = PPC_OPROFILE_FSL_EMB,
.machine_check = machine_check_e500,
.platform = "ppc8540",
},
.dcache_bsize = 32,
.num_pmcs = 4,
.oprofile_cpu_type = "ppc/e500",
- .oprofile_type = PPC_OPROFILE_BOOKE,
+ .oprofile_type = PPC_OPROFILE_FSL_EMB,
.machine_check = machine_check_e500,
.platform = "ppc8548",
},
static void dummy_perf(struct pt_regs *regs)
{
-#if defined(CONFIG_FSL_BOOKE) && !defined(CONFIG_E200)
+#if defined(CONFIG_FSL_EMB_PERFMON)
mtpmr(PMRN_PMGC0, mfpmr(PMRN_PMGC0) & ~PMGC0_PMIE);
#elif defined(CONFIG_PPC64) || defined(CONFIG_6xx)
if (cur_cpu_spec->pmc_type == PPC_PMC_IBM)
cell/spu_profiler.o cell/vma_map.o \
cell/spu_task_sync.o
oprofile-$(CONFIG_PPC64) += op_model_rs64.o op_model_power4.o op_model_pa6t.o
-oprofile-$(CONFIG_FSL_BOOKE) += op_model_fsl_booke.o
+oprofile-$(CONFIG_FSL_EMB_PERFMON) += op_model_fsl_emb.o
oprofile-$(CONFIG_6xx) += op_model_7450.o
model = &op_model_7450;
break;
#endif
-#ifdef CONFIG_FSL_BOOKE
- case PPC_OPROFILE_BOOKE:
- model = &op_model_fsl_booke;
+#if defined(CONFIG_FSL_EMB_PERFMON)
+ case PPC_OPROFILE_FSL_EMB:
+ model = &op_model_fsl_emb;
break;
#endif
default:
/*
- * arch/powerpc/oprofile/op_model_fsl_booke.c
- *
- * Freescale Book-E oprofile support, based on ppc64 oprofile support
+ * Freescale Embedded oprofile support, based on ppc64 oprofile support
* Copyright (C) 2004 Anton Blanchard <anton@au.ibm.com>, IBM
*
* Copyright (c) 2004 Freescale Semiconductor, Inc
#include <asm/system.h>
#include <asm/processor.h>
#include <asm/cputable.h>
-#include <asm/reg_booke.h>
+#include <asm/reg_fsl_emb.h>
#include <asm/page.h>
#include <asm/pmc.h>
#include <asm/oprofile_impl.h>
mfpmr(PMRN_PMLCA3), mfpmr(PMRN_PMLCB3));
}
-static int fsl_booke_cpu_setup(struct op_counter_config *ctr)
+static int fsl_emb_cpu_setup(struct op_counter_config *ctr)
{
int i;
return 0;
}
-static int fsl_booke_reg_setup(struct op_counter_config *ctr,
+static int fsl_emb_reg_setup(struct op_counter_config *ctr,
struct op_system_config *sys,
int num_ctrs)
{
return 0;
}
-static int fsl_booke_start(struct op_counter_config *ctr)
+static int fsl_emb_start(struct op_counter_config *ctr)
{
int i;
return 0;
}
-static void fsl_booke_stop(void)
+static void fsl_emb_stop(void)
{
/* freeze counters */
pmc_stop_ctrs();
}
-static void fsl_booke_handle_interrupt(struct pt_regs *regs,
+static void fsl_emb_handle_interrupt(struct pt_regs *regs,
struct op_counter_config *ctr)
{
unsigned long pc;
pmc_start_ctrs(1);
}
-struct op_powerpc_model op_model_fsl_booke = {
- .reg_setup = fsl_booke_reg_setup,
- .cpu_setup = fsl_booke_cpu_setup,
- .start = fsl_booke_start,
- .stop = fsl_booke_stop,
- .handle_interrupt = fsl_booke_handle_interrupt,
+struct op_powerpc_model op_model_fsl_emb = {
+ .reg_setup = fsl_emb_reg_setup,
+ .cpu_setup = fsl_emb_cpu_setup,
+ .start = fsl_emb_start,
+ .stop = fsl_emb_stop,
+ .handle_interrupt = fsl_emb_handle_interrupt,
};
#ifdef CONFIG_QUICC_ENGINE
qe_reset();
- if ((np = of_find_node_by_name(np, "par_io")) != NULL) {
+ if ((np = of_find_node_by_name(NULL, "par_io")) != NULL) {
par_io_init(np);
of_node_put(np);
#define MPC83XX_SCCR_USB_DRCM_11 0x00300000
#define MPC83XX_SCCR_USB_DRCM_01 0x00100000
#define MPC83XX_SCCR_USB_DRCM_10 0x00200000
+#define MPC8315_SCCR_USB_MASK 0x00c00000
+#define MPC8315_SCCR_USB_DRCM_11 0x00c00000
#define MPC837X_SCCR_USB_DRCM_11 0x00c00000
/* system i/o configuration register low */
u32 temp;
void __iomem *immap, *usb_regs;
struct device_node *np = NULL;
+ struct device_node *immr_node = NULL;
const void *prop;
struct resource res;
int ret = 0;
}
/* Configure clock */
- temp = in_be32(immap + MPC83XX_SCCR_OFFS);
- temp &= ~MPC83XX_SCCR_USB_MASK;
- temp |= MPC83XX_SCCR_USB_DRCM_11; /* 1:3 */
- out_be32(immap + MPC83XX_SCCR_OFFS, temp);
+ immr_node = of_get_parent(np);
+ if (immr_node && of_device_is_compatible(immr_node, "fsl,mpc8315-immr"))
+ clrsetbits_be32(immap + MPC83XX_SCCR_OFFS,
+ MPC8315_SCCR_USB_MASK,
+ MPC8315_SCCR_USB_DRCM_11);
+ else
+ clrsetbits_be32(immap + MPC83XX_SCCR_OFFS,
+ MPC83XX_SCCR_USB_MASK,
+ MPC83XX_SCCR_USB_DRCM_11);
/* Configure pin mux for ULPI. There is no pin mux for UTMI */
if (prop && !strcmp(prop, "ulpi")) {
iounmap(immap);
+ if (immr_node)
+ of_node_put(immr_node);
+
/* Map USB SOC space */
ret = of_address_to_resource(np, 0, &res);
if (ret) {
#include <asm/time.h>
#include <asm/machdep.h>
-#include <asm/commproc.h>
+#include <asm/cpm1.h>
#include <asm/fs_pd.h>
#include <asm/udbg.h>
#include <asm/prom.h>
-#include <sysdev/commproc.h>
+#include "mpc8xx.h"
struct cpm_pin {
int port, pin, flags;
.name = "Adder MPC875",
.probe = adder875_probe,
.setup_arch = adder875_setup,
- .init_IRQ = m8xx_pic_init,
+ .init_IRQ = mpc8xx_pics_init,
.get_irq = mpc8xx_get_irq,
.restart = mpc8xx_restart,
.calibrate_decr = generic_calibrate_decr,
#include <asm/machdep.h>
#include <asm/io.h>
#include <asm/udbg.h>
-#include <asm/commproc.h>
#include <asm/cpm1.h>
#include "mpc8xx.h"
select MPC83xx
select IPIC
select WANT_DEVICE_TREE
+ select FSL_EMB_PERFMON
config PPC_86xx
bool "Freescale 86xx"
bool
config E500
+ select FSL_EMB_PERFMON
bool
config PPC_FPU
depends on E200 || E500
default y
+config FSL_EMB_PERFMON
+ bool
+
config PTE_64BIT
bool
depends on 44x || E500
paddr = (phys_addr_t)of_translate_address(dnp, prop);
mpic = mpic_alloc(dnp, paddr, MPIC_PRIMARY | MPIC_WANTS_RESET,
- 4, 32, " EPIC ");
+ 16, 32, " OpenPIC ");
of_node_put(dnp);
BUG_ON(mpic == NULL);
- /* PCI IRQs */
/*
- * 2.6.12 patch:
- * openpic_set_sources(0, 5, OpenPIC_Addr + 0x10200);
- * openpic_set_sources(5, 2, OpenPIC_Addr + 0x11120);
- * first_irq, num_irqs, __iomem first_ISR
- * o_ss: i, src: 0, fdf50200
- * o_ss: i, src: 1, fdf50220
- * o_ss: i, src: 2, fdf50240
- * o_ss: i, src: 3, fdf50260
- * o_ss: i, src: 4, fdf50280
- * o_ss: i, src: 5, fdf51120
- * o_ss: i, src: 6, fdf51140
+ * 16 Serial Interrupts followed by 16 Internal Interrupts.
+ * I2C is the second internal, so it is at 17, 0x11020.
*/
mpic_assign_isu(mpic, 0, paddr + 0x10200);
- mpic_assign_isu(mpic, 1, paddr + 0x10220);
- mpic_assign_isu(mpic, 2, paddr + 0x10240);
- mpic_assign_isu(mpic, 3, paddr + 0x10260);
- mpic_assign_isu(mpic, 4, paddr + 0x10280);
- mpic_assign_isu(mpic, 5, paddr + 0x11120);
- mpic_assign_isu(mpic, 6, paddr + 0x11140);
+ mpic_assign_isu(mpic, 1, paddr + 0x11000);
mpic_init(mpic);
}
{
unsigned long root = of_get_flat_dt_root();
- return of_flat_dt_is_compatible(root, "storcenter");
+ return of_flat_dt_is_compatible(root, "iomega,storcenter");
}
define_machine(storcenter){
if (ret)
goto unreg;
- ret = platform_device_register(pdev);
+ ret = platform_device_add(pdev);
if (ret)
goto unreg;
{
struct device_node *qe;
unsigned int size;
- const void *prop;
+ const u32 *prop;
if (qebase != -1)
return qebase;
}
prop = of_get_property(qe, "reg", &size);
- qebase = of_translate_address(qe, prop);
+ if (prop && size >= sizeof(*prop))
+ qebase = of_translate_address(qe, prop);
of_node_put(qe);
return qebase;
}
prop = of_get_property(qe, "brg-frequency", &size);
- if (!prop || size != sizeof(*prop))
- return brg_clk;
+ if (prop && size == sizeof(*prop))
+ brg_clk = *prop;
- brg_clk = *prop;
of_node_put(qe);
return brg_clk;
config CPMAC
tristate "TI AR7 CPMAC Ethernet support (EXPERIMENTAL)"
- depends on NET_ETHERNET && EXPERIMENTAL && AR7
+ depends on NET_ETHERNET && EXPERIMENTAL && AR7 && BROKEN
select PHYLIB
- select FIXED_PHY
- select FIXED_MII_100_FDX
help
TI AR7 CPMAC Ethernet support
spin_unlock(&priv->lock);
}
-static int cpmac_link_update(struct net_device *dev,
- struct fixed_phy_status *status)
-{
- status->link = 1;
- status->speed = 100;
- status->duplex = 1;
- return 0;
-}
-
static int cpmac_open(struct net_device *dev)
{
int i, size, res;
static int __devinit cpmac_probe(struct platform_device *pdev)
{
int rc, phy_id, i;
+ int mdio_bus_id = cpmac_mii.id;
struct resource *mem;
struct cpmac_priv *priv;
struct net_device *dev;
struct plat_cpmac_data *pdata;
- struct fixed_info *fixed_phy;
DECLARE_MAC_BUF(mac);
pdata = pdev->dev.platform_data;
}
if (phy_id == PHY_MAX_ADDR) {
- if (external_switch || dumb_switch)
+ if (external_switch || dumb_switch) {
+ struct fixed_phy_status status = {};
+
+ mdio_bus_id = 0;
+
+ /*
+ * FIXME: this should be in the platform code!
+ * Since there is not platform code at all (that is,
+ * no mainline users of that driver), place it here
+ * for now.
+ */
phy_id = 0;
- else {
+ status.link = 1;
+ status.duplex = 1;
+ status.speed = 100;
+ fixed_phy_add(PHY_POLL, phy_id, &status);
+ } else {
printk(KERN_ERR "cpmac: no PHY present\n");
return -ENODEV;
}
priv->msg_enable = netif_msg_init(debug_level, 0xff);
memcpy(dev->dev_addr, pdata->dev_addr, sizeof(dev->dev_addr));
- if (phy_id == 31) {
- snprintf(priv->phy_name, BUS_ID_SIZE, PHY_ID_FMT, cpmac_mii.id,
- phy_id);
- } else {
- /* Let's try to get a free fixed phy... */
- for (i = 0; i < MAX_PHY_AMNT; i++) {
- fixed_phy = fixed_mdio_get_phydev(i);
- if (!fixed_phy)
- continue;
- if (!fixed_phy->phydev->attached_dev) {
- strncpy(priv->phy_name,
- fixed_phy->phydev->dev.bus_id,
- BUS_ID_SIZE);
- fixed_mdio_set_link_update(fixed_phy->phydev,
- &cpmac_link_update);
- goto phy_found;
- }
- }
- if (netif_msg_drv(priv))
- printk(KERN_ERR "%s: Could not find fixed PHY\n",
- dev->name);
- rc = -ENODEV;
- goto fail;
- }
+ snprintf(priv->phy_name, BUS_ID_SIZE, PHY_ID_FMT, mdio_bus_id, phy_id);
-phy_found:
priv->phy = phy_connect(dev, priv->phy_name, &cpmac_adjust_link, 0,
PHY_INTERFACE_MODE_MII);
if (IS_ERR(priv->phy)) {
PPC_OPROFILE_RS64 = 1,
PPC_OPROFILE_POWER4 = 2,
PPC_OPROFILE_G4 = 3,
- PPC_OPROFILE_BOOKE = 4,
+ PPC_OPROFILE_FSL_EMB = 4,
PPC_OPROFILE_CELL = 5,
PPC_OPROFILE_PA6T = 6,
};
int num_counters;
};
-extern struct op_powerpc_model op_model_fsl_booke;
+extern struct op_powerpc_model op_model_fsl_emb;
extern struct op_powerpc_model op_model_rs64;
extern struct op_powerpc_model op_model_power4;
extern struct op_powerpc_model op_model_7450;
#include <asm/reg_booke.h>
#endif /* CONFIG_BOOKE || CONFIG_40x */
+#ifdef CONFIG_FSL_EMB_PERFMON
+#include <asm/reg_fsl_emb.h>
+#endif
+
#ifdef CONFIG_8xx
#include <asm/reg_8xx.h>
#endif /* CONFIG_8xx */
#ifndef __ASM_POWERPC_REG_BOOKE_H__
#define __ASM_POWERPC_REG_BOOKE_H__
-#ifndef __ASSEMBLY__
-/* Performance Monitor Registers */
-#define mfpmr(rn) ({unsigned int rval; \
- asm volatile("mfpmr %0," __stringify(rn) \
- : "=r" (rval)); rval;})
-#define mtpmr(rn, v) asm volatile("mtpmr " __stringify(rn) ",%0" : : "r" (v))
-#endif /* __ASSEMBLY__ */
-
-/* Freescale Book E Performance Monitor APU Registers */
-#define PMRN_PMC0 0x010 /* Performance Monitor Counter 0 */
-#define PMRN_PMC1 0x011 /* Performance Monitor Counter 1 */
-#define PMRN_PMC2 0x012 /* Performance Monitor Counter 1 */
-#define PMRN_PMC3 0x013 /* Performance Monitor Counter 1 */
-#define PMRN_PMLCA0 0x090 /* PM Local Control A0 */
-#define PMRN_PMLCA1 0x091 /* PM Local Control A1 */
-#define PMRN_PMLCA2 0x092 /* PM Local Control A2 */
-#define PMRN_PMLCA3 0x093 /* PM Local Control A3 */
-
-#define PMLCA_FC 0x80000000 /* Freeze Counter */
-#define PMLCA_FCS 0x40000000 /* Freeze in Supervisor */
-#define PMLCA_FCU 0x20000000 /* Freeze in User */
-#define PMLCA_FCM1 0x10000000 /* Freeze when PMM==1 */
-#define PMLCA_FCM0 0x08000000 /* Freeze when PMM==0 */
-#define PMLCA_CE 0x04000000 /* Condition Enable */
-
-#define PMLCA_EVENT_MASK 0x007f0000 /* Event field */
-#define PMLCA_EVENT_SHIFT 16
-
-#define PMRN_PMLCB0 0x110 /* PM Local Control B0 */
-#define PMRN_PMLCB1 0x111 /* PM Local Control B1 */
-#define PMRN_PMLCB2 0x112 /* PM Local Control B2 */
-#define PMRN_PMLCB3 0x113 /* PM Local Control B3 */
-
-#define PMLCB_THRESHMUL_MASK 0x0700 /* Threshhold Multiple Field */
-#define PMLCB_THRESHMUL_SHIFT 8
-
-#define PMLCB_THRESHOLD_MASK 0x003f /* Threshold Field */
-#define PMLCB_THRESHOLD_SHIFT 0
-
-#define PMRN_PMGC0 0x190 /* PM Global Control 0 */
-
-#define PMGC0_FAC 0x80000000 /* Freeze all Counters */
-#define PMGC0_PMIE 0x40000000 /* Interrupt Enable */
-#define PMGC0_FCECE 0x20000000 /* Freeze countes on
- Enabled Condition or
- Event */
-
-#define PMRN_UPMC0 0x000 /* User Performance Monitor Counter 0 */
-#define PMRN_UPMC1 0x001 /* User Performance Monitor Counter 1 */
-#define PMRN_UPMC2 0x002 /* User Performance Monitor Counter 1 */
-#define PMRN_UPMC3 0x003 /* User Performance Monitor Counter 1 */
-#define PMRN_UPMLCA0 0x080 /* User PM Local Control A0 */
-#define PMRN_UPMLCA1 0x081 /* User PM Local Control A1 */
-#define PMRN_UPMLCA2 0x082 /* User PM Local Control A2 */
-#define PMRN_UPMLCA3 0x083 /* User PM Local Control A3 */
-#define PMRN_UPMLCB0 0x100 /* User PM Local Control B0 */
-#define PMRN_UPMLCB1 0x101 /* User PM Local Control B1 */
-#define PMRN_UPMLCB2 0x102 /* User PM Local Control B2 */
-#define PMRN_UPMLCB3 0x103 /* User PM Local Control B3 */
-#define PMRN_UPMGC0 0x180 /* User PM Global Control 0 */
-
-
/* Machine State Register (MSR) Fields */
#define MSR_UCLE (1<<26) /* User-mode cache lock enable */
#define MSR_SPE (1<<25) /* Enable SPE */
--- /dev/null
+/*
+ * Contains register definitions for the Freescale Embedded Performance
+ * Monitor.
+ */
+#ifdef __KERNEL__
+#ifndef __ASM_POWERPC_REG_FSL_EMB_H__
+#define __ASM_POWERPC_REG_FSL_EMB_H__
+
+#ifndef __ASSEMBLY__
+/* Performance Monitor Registers */
+#define mfpmr(rn) ({unsigned int rval; \
+ asm volatile("mfpmr %0," __stringify(rn) \
+ : "=r" (rval)); rval;})
+#define mtpmr(rn, v) asm volatile("mtpmr " __stringify(rn) ",%0" : : "r" (v))
+#endif /* __ASSEMBLY__ */
+
+/* Freescale Book E Performance Monitor APU Registers */
+#define PMRN_PMC0 0x010 /* Performance Monitor Counter 0 */
+#define PMRN_PMC1 0x011 /* Performance Monitor Counter 1 */
+#define PMRN_PMC2 0x012 /* Performance Monitor Counter 1 */
+#define PMRN_PMC3 0x013 /* Performance Monitor Counter 1 */
+#define PMRN_PMLCA0 0x090 /* PM Local Control A0 */
+#define PMRN_PMLCA1 0x091 /* PM Local Control A1 */
+#define PMRN_PMLCA2 0x092 /* PM Local Control A2 */
+#define PMRN_PMLCA3 0x093 /* PM Local Control A3 */
+
+#define PMLCA_FC 0x80000000 /* Freeze Counter */
+#define PMLCA_FCS 0x40000000 /* Freeze in Supervisor */
+#define PMLCA_FCU 0x20000000 /* Freeze in User */
+#define PMLCA_FCM1 0x10000000 /* Freeze when PMM==1 */
+#define PMLCA_FCM0 0x08000000 /* Freeze when PMM==0 */
+#define PMLCA_CE 0x04000000 /* Condition Enable */
+
+#define PMLCA_EVENT_MASK 0x007f0000 /* Event field */
+#define PMLCA_EVENT_SHIFT 16
+
+#define PMRN_PMLCB0 0x110 /* PM Local Control B0 */
+#define PMRN_PMLCB1 0x111 /* PM Local Control B1 */
+#define PMRN_PMLCB2 0x112 /* PM Local Control B2 */
+#define PMRN_PMLCB3 0x113 /* PM Local Control B3 */
+
+#define PMLCB_THRESHMUL_MASK 0x0700 /* Threshhold Multiple Field */
+#define PMLCB_THRESHMUL_SHIFT 8
+
+#define PMLCB_THRESHOLD_MASK 0x003f /* Threshold Field */
+#define PMLCB_THRESHOLD_SHIFT 0
+
+#define PMRN_PMGC0 0x190 /* PM Global Control 0 */
+
+#define PMGC0_FAC 0x80000000 /* Freeze all Counters */
+#define PMGC0_PMIE 0x40000000 /* Interrupt Enable */
+#define PMGC0_FCECE 0x20000000 /* Freeze countes on
+ Enabled Condition or
+ Event */
+
+#define PMRN_UPMC0 0x000 /* User Performance Monitor Counter 0 */
+#define PMRN_UPMC1 0x001 /* User Performance Monitor Counter 1 */
+#define PMRN_UPMC2 0x002 /* User Performance Monitor Counter 1 */
+#define PMRN_UPMC3 0x003 /* User Performance Monitor Counter 1 */
+#define PMRN_UPMLCA0 0x080 /* User PM Local Control A0 */
+#define PMRN_UPMLCA1 0x081 /* User PM Local Control A1 */
+#define PMRN_UPMLCA2 0x082 /* User PM Local Control A2 */
+#define PMRN_UPMLCA3 0x083 /* User PM Local Control A3 */
+#define PMRN_UPMLCB0 0x100 /* User PM Local Control B0 */
+#define PMRN_UPMLCB1 0x101 /* User PM Local Control B1 */
+#define PMRN_UPMLCB2 0x102 /* User PM Local Control B2 */
+#define PMRN_UPMLCB3 0x103 /* User PM Local Control B3 */
+#define PMRN_UPMGC0 0x180 /* User PM Global Control 0 */
+
+
+#endif /* __ASM_POWERPC_REG_FSL_EMB_H__ */
+#endif /* __KERNEL__ */
git://bbs.cooldavid.org / net-next-2.6.git / commitdiff