* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6:
ACPI: Kconfig: remove CONFIG_ACPI_SLEEP from source
ACPI: quiet ACPI Exceptions due to no _PTC or _TSS
ACPI: Remove references to ACPI_STATE_S2 from acpi_pm_enter
ACPI: Kconfig: always enable CONFIG_ACPI_SLEEP on X86
ACPI: Kconfig: fold /proc/acpi/sleep under CONFIG_ACPI_PROCFS
ACPI: Kconfig: CONFIG_ACPI_PROCFS now defaults to N
ACPI: autoload modules - Create __mod_acpi_device_table symbol for all ACPI drivers
ACPI: autoload modules - Create ACPI alias interface
ACPI: autoload modules - ACPICA modifications
ACPI: asus-laptop: Fix failure exits
ACPI: fix oops due to typo in new throttling code
ACPI: ignore _PSx method for hotplugable PCI devices
ACPI: Use ACPI methods to select PCI device suspend state
ACPI, PNP: hook ACPI D-state to PNP suspend/resume
ACPI: Add acpi_pm_device_sleep_state helper routine
ACPI: Implement the set_target() callback from pm_ops
ifneq ($(CONFIG_PCI),)
obj-$(CONFIG_X86_IO_APIC) += earlyquirk.o
endif
-obj-$(CONFIG_ACPI_SLEEP) += sleep.o wakeup.o
+obj-$(CONFIG_ACPI) += sleep.o wakeup.o
ifneq ($(CONFIG_ACPI_PROCESSOR),)
obj-y += cstate.o processor.o
*/
reserve_bootmem(PAGE_SIZE, PAGE_SIZE);
#endif
-#ifdef CONFIG_ACPI_SLEEP
+#ifdef CONFIG_ACPI
/*
* Reserve low memory region for sleep support.
*/
paravirt_pagetable_setup_done(pgd_base);
}
-#if defined(CONFIG_SOFTWARE_SUSPEND) || defined(CONFIG_ACPI_SLEEP)
+#if defined(CONFIG_SOFTWARE_SUSPEND) || defined(CONFIG_ACPI)
/*
* Swap suspend & friends need this for resume because things like the intel-agp
* driver might have split up a kernel 4MB mapping.
unsigned int acpi_cpei_override;
unsigned int acpi_cpei_phys_cpuid;
+unsigned long acpi_wakeup_address = 0;
+
const char __init *
acpi_get_sysname(void)
{
EXPORT_SYMBOL(acpi_unregister_ioapic);
+/*
+ * acpi_save_state_mem() - save kernel state
+ *
+ * TBD when when IA64 starts to support suspend...
+ */
+int acpi_save_state_mem(void) { return 0; }
+
+/*
+ * acpi_restore_state()
+ */
+void acpi_restore_state_mem(void) {}
+
+/*
+ * do_suspend_lowlevel()
+ */
+void do_suspend_lowlevel(void) {}
+
#endif /* CONFIG_ACPI */
obj-y := boot.o
boot-y := ../../../i386/kernel/acpi/boot.o
-obj-$(CONFIG_ACPI_SLEEP) += sleep.o wakeup.o
+obj-y += sleep.o wakeup.o
ifneq ($(CONFIG_ACPI_PROCESSOR),)
obj-y += processor.o
Low-Level Sleep Support
-------------------------------------------------------------------------- */
-#ifdef CONFIG_ACPI_SLEEP
-
/* address in low memory of the wakeup routine. */
unsigned long acpi_wakeup_address = 0;
unsigned long acpi_realmode_flags;
__setup("acpi_sleep=", acpi_sleep_setup);
-#endif /*CONFIG_ACPI_SLEEP */
-
void acpi_pci_link_exit(void)
{
}
addq %rbp, trampoline_level4_pgt + 0(%rip)
addq %rbp, trampoline_level4_pgt + (511*8)(%rip)
#endif
-#ifdef CONFIG_ACPI_SLEEP
+#ifdef CONFIG_ACPI
addq %rbp, wakeup_level4_pgt + 0(%rip)
addq %rbp, wakeup_level4_pgt + (511*8)(%rip)
#endif
reserve_bootmem_generic(SMP_TRAMPOLINE_BASE, 2*PAGE_SIZE);
#endif
-#ifdef CONFIG_ACPI_SLEEP
+#ifdef CONFIG_ACPI
/*
* Reserve low memory region for sleep support.
*/
depends on PCI
depends on PM
select PNP
+ # for sleep
+ select HOTPLUG_CPU if X86 && SMP
+ select SUSPEND_SMP if X86 && SMP
default y
---help---
Advanced Configuration and Power Interface (ACPI) support for
if ACPI
-config ACPI_SLEEP
- bool "Sleep States"
- depends on X86 && (!SMP || SUSPEND_SMP)
- default y
- ---help---
- This option adds support for ACPI suspend states.
-
- With this option, you will be able to put the system "to sleep".
- Sleep states are low power states for the system and devices. All
- of the system operating state is saved to either memory or disk
- (depending on the state), to allow the system to resume operation
- quickly at your request.
-
- Although this option sounds really nifty, barely any of the device
- drivers have been converted to the new driver model and hence few
- have proper power management support.
-
- This option is not recommended for anyone except those doing driver
- power management development.
-
-config ACPI_SLEEP_PROC_FS
- bool
- depends on ACPI_SLEEP && PROC_FS
- default y
-
-config ACPI_SLEEP_PROC_SLEEP
- bool "/proc/acpi/sleep (deprecated)"
- depends on ACPI_SLEEP_PROC_FS
- default n
- ---help---
- Create /proc/acpi/sleep
- Deprecated by /sys/power/state
-
config ACPI_PROCFS
- bool "Procfs interface (deprecated)"
- default y
+ bool "Deprecated /proc/acpi files"
+ depends on PROC_FS
---help---
- The Procfs interface for ACPI is made optional for backward compatibility.
- As the same functions are duplicated in the sysfs interface
- and this proc interface will be removed some time later,
- it's marked as deprecated.
- ( /proc/acpi/debug_layer && debug_level are deprecated by
- /sys/module/acpi/parameters/debug_layer && debug_level.
- /proc/acpi/info is deprecated by
- /sys/module/acpi/parameters/acpica_version )
+ For backwards compatibility, this option allows
+ depricated /proc/acpi/ files to exist, even when
+ they have been replaced by functions in /sys.
+ The deprecated files (and their replacements) include:
+
+ /proc/acpi/sleep (/sys/power/state)
+ /proc/acpi/info (/sys/modules/acpi/parameters/acpica_version)
+ /proc/acpi/dsdt (/sys/firmware/acpi/tables/DSDT)
+ /proc/acpi/fadt (/sys/firmware/acpi/tables/FACP)
+ /proc/acpi/debug_layer (/sys/module/acpi/parameters/debug_layer)
+ /proc/acpi/debug_level (/sys/module/acpi/parameters/debug_level)
+
+ This option has no effect on /proc/acpi/ files
+ and functions which do not yet exist in /sys.
+
+ Say N to delete /proc/acpi/ files that have moved to /sys/
config ACPI_AC
tristate "AC Adapter"
#define ACPI_AC_COMPONENT 0x00020000
#define ACPI_AC_CLASS "ac_adapter"
-#define ACPI_AC_HID "ACPI0003"
#define ACPI_AC_DEVICE_NAME "AC Adapter"
#define ACPI_AC_FILE_STATE "state"
#define ACPI_AC_NOTIFY_STATUS 0x80
static int acpi_ac_remove(struct acpi_device *device, int type);
static int acpi_ac_open_fs(struct inode *inode, struct file *file);
+const static struct acpi_device_id ac_device_ids[] = {
+ {"ACPI0003", 0},
+ {"", 0},
+};
+MODULE_DEVICE_TABLE(acpi, ac_device_ids);
+
static struct acpi_driver acpi_ac_driver = {
.name = "ac",
.class = ACPI_AC_CLASS,
- .ids = ACPI_AC_HID,
+ .ids = ac_device_ids,
.ops = {
.add = acpi_ac_add,
.remove = acpi_ac_remove,
static int acpi_memory_device_remove(struct acpi_device *device, int type);
static int acpi_memory_device_start(struct acpi_device *device);
+static const struct acpi_device_id memory_device_ids[] = {
+ {ACPI_MEMORY_DEVICE_HID, 0},
+ {"", 0},
+};
+MODULE_DEVICE_TABLE(acpi, memory_device_ids);
+
static struct acpi_driver acpi_memory_device_driver = {
.name = "acpi_memhotplug",
.class = ACPI_MEMORY_DEVICE_CLASS,
- .ids = ACPI_MEMORY_DEVICE_HID,
+ .ids = memory_device_ids,
.ops = {
.add = acpi_memory_device_add,
.remove = acpi_memory_device_remove,
#define ACPI_HOTK_NAME "Asus Laptop ACPI Extras Driver"
#define ACPI_HOTK_CLASS "hotkey"
#define ACPI_HOTK_DEVICE_NAME "Hotkey"
-#define ACPI_HOTK_HID "ATK0100"
/*
* Some events we use, same for all Asus
static struct asus_hotk *hotk;
/*
- * The hotkey driver declaration
+ * The hotkey driver and autoloading declaration
*/
static int asus_hotk_add(struct acpi_device *device);
static int asus_hotk_remove(struct acpi_device *device, int type);
+static const struct acpi_device_id asus_device_ids[] = {
+ {"ATK0100", 0},
+ {"", 0},
+};
+MODULE_DEVICE_TABLE(acpi, asus_device_ids);
+
static struct acpi_driver asus_hotk_driver = {
.name = "asus_acpi",
.class = ACPI_HOTK_CLASS,
- .ids = ACPI_HOTK_HID,
+ .ids = asus_device_ids,
.ops = {
.add = asus_hotk_add,
.remove = asus_hotk_remove,
#define ACPI_BATTERY_COMPONENT 0x00040000
#define ACPI_BATTERY_CLASS "battery"
-#define ACPI_BATTERY_HID "PNP0C0A"
#define ACPI_BATTERY_DEVICE_NAME "Battery"
#define ACPI_BATTERY_NOTIFY_STATUS 0x80
#define ACPI_BATTERY_NOTIFY_INFO 0x81
static int acpi_battery_remove(struct acpi_device *device, int type);
static int acpi_battery_resume(struct acpi_device *device);
+static const struct acpi_device_id battery_device_ids[] = {
+ {"PNP0C0A", 0},
+ {"", 0},
+};
+MODULE_DEVICE_TABLE(acpi, battery_device_ids);
+
static struct acpi_driver acpi_battery_driver = {
.name = "battery",
.class = ACPI_BATTERY_CLASS,
- .ids = ACPI_BATTERY_HID,
+ .ids = battery_device_ids,
.ops = {
.add = acpi_battery_add,
.resume = acpi_battery_resume,
MODULE_DESCRIPTION("ACPI Button Driver");
MODULE_LICENSE("GPL");
+static const struct acpi_device_id button_device_ids[] = {
+ {ACPI_BUTTON_HID_LID, 0},
+ {ACPI_BUTTON_HID_SLEEP, 0},
+ {ACPI_BUTTON_HID_SLEEPF, 0},
+ {ACPI_BUTTON_HID_POWER, 0},
+ {ACPI_BUTTON_HID_POWERF, 0},
+ {"", 0},
+};
+MODULE_DEVICE_TABLE(acpi, button_device_ids);
+
static int acpi_button_add(struct acpi_device *device);
static int acpi_button_remove(struct acpi_device *device, int type);
static int acpi_button_info_open_fs(struct inode *inode, struct file *file);
static struct acpi_driver acpi_button_driver = {
.name = "button",
.class = ACPI_BUTTON_CLASS,
- .ids = "button_power,button_sleep,PNP0C0D,PNP0C0C,PNP0C0E",
+ .ids = button_device_ids,
.ops = {
.add = acpi_button_add,
.remove = acpi_button_remove,
static int acpi_container_add(struct acpi_device *device);
static int acpi_container_remove(struct acpi_device *device, int type);
+static const struct acpi_device_id container_device_ids[] = {
+ {"ACPI0004", 0},
+ {"PNP0A05", 0},
+ {"PNP0A06", 0},
+ {"", 0},
+};
+MODULE_DEVICE_TABLE(acpi, container_device_ids);
+
static struct acpi_driver acpi_container_driver = {
.name = "container",
.class = ACPI_CONTAINER_CLASS,
- .ids = "ACPI0004,PNP0A05,PNP0A06",
+ .ids = container_device_ids,
.ops = {
.add = acpi_container_add,
.remove = acpi_container_remove,
#include <acpi/actypes.h>
#define ACPI_EC_CLASS "embedded_controller"
-#define ACPI_EC_HID "PNP0C09"
#define ACPI_EC_DEVICE_NAME "Embedded Controller"
#define ACPI_EC_FILE_INFO "info"
static int acpi_ec_stop(struct acpi_device *device, int type);
static int acpi_ec_add(struct acpi_device *device);
+static const struct acpi_device_id ec_device_ids[] = {
+ {"PNP0C09", 0},
+ {"", 0},
+};
+
static struct acpi_driver acpi_ec_driver = {
.name = "ec",
.class = ACPI_EC_CLASS,
- .ids = ACPI_EC_HID,
+ .ids = ec_device_ids,
.ops = {
.add = acpi_ec_add,
.remove = acpi_ec_remove,
static u8 acpi_ev_is_pci_root_bridge(struct acpi_namespace_node *node)
{
acpi_status status;
- struct acpi_device_id hid;
+ struct acpica_device_id hid;
struct acpi_compatible_id_list *cid;
acpi_native_uint i;
static int acpi_fan_suspend(struct acpi_device *device, pm_message_t state);
static int acpi_fan_resume(struct acpi_device *device);
+static const struct acpi_device_id fan_device_ids[] = {
+ {"PNP0C0B", 0},
+ {"", 0},
+};
+MODULE_DEVICE_TABLE(acpi, fan_device_ids);
+
static struct acpi_driver acpi_fan_driver = {
.name = "fan",
.class = ACPI_FAN_CLASS,
- .ids = "PNP0C0B",
+ .ids = fan_device_ids,
.ops = {
.add = acpi_fan_add,
.remove = acpi_fan_remove,
acpi_status status;
struct acpi_namespace_node *node;
u32 flags;
- struct acpi_device_id hid;
+ struct acpica_device_id hid;
struct acpi_compatible_id_list *cid;
acpi_native_uint i;
#define _COMPONENT ACPI_PCI_COMPONENT
ACPI_MODULE_NAME("pci_link");
#define ACPI_PCI_LINK_CLASS "pci_irq_routing"
-#define ACPI_PCI_LINK_HID "PNP0C0F"
#define ACPI_PCI_LINK_DEVICE_NAME "PCI Interrupt Link"
#define ACPI_PCI_LINK_FILE_INFO "info"
#define ACPI_PCI_LINK_FILE_STATUS "state"
static int acpi_pci_link_add(struct acpi_device *device);
static int acpi_pci_link_remove(struct acpi_device *device, int type);
+static struct acpi_device_id link_device_ids[] = {
+ {"PNP0C0F", 0},
+ {"", 0},
+};
+MODULE_DEVICE_TABLE(acpi, link_device_ids);
+
static struct acpi_driver acpi_pci_link_driver = {
.name = "pci_link",
.class = ACPI_PCI_LINK_CLASS,
- .ids = ACPI_PCI_LINK_HID,
+ .ids = link_device_ids,
.ops = {
.add = acpi_pci_link_add,
.remove = acpi_pci_link_remove,
#define _COMPONENT ACPI_PCI_COMPONENT
ACPI_MODULE_NAME("pci_root");
#define ACPI_PCI_ROOT_CLASS "pci_bridge"
-#define ACPI_PCI_ROOT_HID "PNP0A03"
#define ACPI_PCI_ROOT_DEVICE_NAME "PCI Root Bridge"
static int acpi_pci_root_add(struct acpi_device *device);
static int acpi_pci_root_remove(struct acpi_device *device, int type);
static int acpi_pci_root_start(struct acpi_device *device);
+static struct acpi_device_id root_device_ids[] = {
+ {"PNP0A03", 0},
+ {"", 0},
+};
+MODULE_DEVICE_TABLE(acpi, root_device_ids);
+
static struct acpi_driver acpi_pci_root_driver = {
.name = "pci_root",
.class = ACPI_PCI_ROOT_CLASS,
- .ids = ACPI_PCI_ROOT_HID,
+ .ids = root_device_ids,
.ops = {
.add = acpi_pci_root_add,
.remove = acpi_pci_root_remove,
static int acpi_power_resume(struct acpi_device *device);
static int acpi_power_open_fs(struct inode *inode, struct file *file);
+static struct acpi_device_id power_device_ids[] = {
+ {ACPI_POWER_HID, 0},
+ {"", 0},
+};
+MODULE_DEVICE_TABLE(acpi, power_device_ids);
+
static struct acpi_driver acpi_power_driver = {
.name = "power",
.class = ACPI_POWER_CLASS,
- .ids = ACPI_POWER_HID,
+ .ids = power_device_ids,
.ops = {
.add = acpi_power_add,
.remove = acpi_power_remove,
extern int acpi_processor_tstate_has_changed(struct acpi_processor *pr);
+static const struct acpi_device_id processor_device_ids[] = {
+ {ACPI_PROCESSOR_HID, 0},
+ {"", 0},
+};
+MODULE_DEVICE_TABLE(acpi, processor_device_ids);
+
static struct acpi_driver acpi_processor_driver = {
.name = "processor",
.class = ACPI_PROCESSOR_CLASS,
- .ids = ACPI_PROCESSOR_HID,
+ .ids = processor_device_ids,
.ops = {
.add = acpi_processor_add,
.remove = acpi_processor_remove,
static int acpi_processor_get_throttling(struct acpi_processor *pr);
int acpi_processor_set_throttling(struct acpi_processor *pr, int state);
+/*
+ * _TPC - Throttling Present Capabilities
+ */
static int acpi_processor_get_platform_limit(struct acpi_processor *pr)
{
acpi_status status = 0;
if (!pr)
return -EINVAL;
status = acpi_evaluate_integer(pr->handle, "_TPC", NULL, &tpc);
- if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) {
- ACPI_EXCEPTION((AE_INFO, status, "Evaluating _TPC"));
+ if (ACPI_FAILURE(status)) {
+ if (status != AE_NOT_FOUND) {
+ ACPI_EXCEPTION((AE_INFO, status, "Evaluating _TPC"));
+ }
return -ENODEV;
}
pr->throttling_platform_limit = (int)tpc;
return acpi_processor_get_platform_limit(pr);
}
-/* --------------------------------------------------------------------------
- _PTC, _TSS, _TSD support
- -------------------------------------------------------------------------- */
+/*
+ * _PTC - Processor Throttling Control (and status) register location
+ */
static int acpi_processor_get_throttling_control(struct acpi_processor *pr)
{
int result = 0;
status = acpi_evaluate_object(pr->handle, "_PTC", NULL, &buffer);
if (ACPI_FAILURE(status)) {
- ACPI_EXCEPTION((AE_INFO, status, "Evaluating _PTC"));
+ if (status != AE_NOT_FOUND) {
+ ACPI_EXCEPTION((AE_INFO, status, "Evaluating _PTC"));
+ }
return -ENODEV;
}
return result;
}
+
+/*
+ * _TSS - Throttling Supported States
+ */
static int acpi_processor_get_throttling_states(struct acpi_processor *pr)
{
int result = 0;
status = acpi_evaluate_object(pr->handle, "_TSS", NULL, &buffer);
if (ACPI_FAILURE(status)) {
- ACPI_EXCEPTION((AE_INFO, status, "Evaluating _TSS"));
+ if (status != AE_NOT_FOUND) {
+ ACPI_EXCEPTION((AE_INFO, status, "Evaluating _TSS"));
+ }
return -ENODEV;
}
return result;
}
+
+/*
+ * _TSD - T-State Dependencies
+ */
static int acpi_processor_get_tsd(struct acpi_processor *pr)
{
int result = 0;
status = acpi_evaluate_object(pr->handle, "_TSD", NULL, &buffer);
if (ACPI_FAILURE(status)) {
+ if (status != AE_NOT_FOUND) {
+ ACPI_EXCEPTION((AE_INFO, status, "Evaluating _TSD"));
+ }
return -ENODEV;
}
int result = 0;
int step = 0;
int i = 0;
- int no_ptc = 0;
- int no_tss = 0;
- int no_tsd = 0;
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
"pblk_address[0x%08x] duty_offset[%d] duty_width[%d]\n",
if (!pr)
return -EINVAL;
- /* TBD: Support ACPI 2.0 objects */
- no_ptc = acpi_processor_get_throttling_control(pr);
- no_tss = acpi_processor_get_throttling_states(pr);
- no_tsd = acpi_processor_get_tsd(pr);
-
- if (no_ptc || no_tss) {
+ /*
+ * Evaluate _PTC, _TSS and _TPC
+ * They must all be present or none of them can be used.
+ */
+ if (acpi_processor_get_throttling_control(pr) ||
+ acpi_processor_get_throttling_states(pr) ||
+ acpi_processor_get_platform_limit(pr))
+ {
pr->throttling.acpi_processor_get_throttling =
&acpi_processor_get_throttling_fadt;
pr->throttling.acpi_processor_set_throttling =
&acpi_processor_set_throttling_ptc;
}
+ acpi_processor_get_tsd(pr);
+
if (!pr->throttling.address) {
ACPI_DEBUG_PRINT((ACPI_DB_INFO, "No throttling register\n"));
return 0;
pr->throttling.state_count - 1);
seq_puts(seq, "states:\n");
- if (acpi_processor_get_throttling == acpi_processor_get_throttling_fadt)
+ if (pr->throttling.acpi_processor_get_throttling ==
+ acpi_processor_get_throttling_fadt) {
for (i = 0; i < pr->throttling.state_count; i++)
seq_printf(seq, " %cT%d: %02d%%\n",
(i == pr->throttling.state ? '*' : ' '), i,
(pr->throttling.states[i].performance ? pr->
throttling.states[i].performance / 10 : 0));
- else
+ } else {
for (i = 0; i < pr->throttling.state_count; i++)
seq_printf(seq, " %cT%d: %02d%%\n",
(i == pr->throttling.state ? '*' : ' '), i,
(int)pr->throttling.states_tss[i].
freqpercentage);
+ }
end:
return 0;
#define ACPI_SBS_CLASS "sbs"
#define ACPI_AC_CLASS "ac_adapter"
#define ACPI_BATTERY_CLASS "battery"
-#define ACPI_SBS_HID "ACPI0002"
#define ACPI_SBS_DEVICE_NAME "Smart Battery System"
#define ACPI_SBS_FILE_INFO "info"
#define ACPI_SBS_FILE_STATE "state"
static int acpi_sbs_remove(struct acpi_device *device, int type);
static int acpi_sbs_resume(struct acpi_device *device);
+static const struct acpi_device_id sbs_device_ids[] = {
+ {"ACPI0001", 0},
+ {"ACPI0005", 0},
+ {"", 0},
+};
+MODULE_DEVICE_TABLE(acpi, sbs_device_ids);
+
static struct acpi_driver acpi_sbs_driver = {
.name = "sbs",
.class = ACPI_SBS_CLASS,
- .ids = "ACPI0001,ACPI0005",
+ .ids = sbs_device_ids,
.ops = {
.add = acpi_sbs_add,
.remove = acpi_sbs_remove,
extern struct acpi_device *acpi_root;
#define ACPI_BUS_CLASS "system_bus"
-#define ACPI_BUS_HID "ACPI_BUS"
+#define ACPI_BUS_HID "LNXSYBUS"
#define ACPI_BUS_DEVICE_NAME "System Bus"
static LIST_HEAD(acpi_device_list);
unsigned int instance_no;
struct list_head node;
};
+
+/*
+ * Creates hid/cid(s) string needed for modalias and uevent
+ * e.g. on a device with hid:IBM0001 and cid:ACPI0001 you get:
+ * char *modalias: "acpi:IBM0001:ACPI0001"
+*/
+int create_modalias(struct acpi_device *acpi_dev, char *modalias, int size){
+
+ int len;
+
+ if (!acpi_dev->flags.hardware_id)
+ return -ENODEV;
+
+ len = snprintf(modalias, size, "acpi:%s:",
+ acpi_dev->pnp.hardware_id);
+ if (len < 0 || len >= size)
+ return -EINVAL;
+ size -= len;
+
+ if (acpi_dev->flags.compatible_ids) {
+ struct acpi_compatible_id_list *cid_list;
+ int i;
+ int count;
+
+ cid_list = acpi_dev->pnp.cid_list;
+ for (i = 0; i < cid_list->count; i++) {
+ count = snprintf(&modalias[len], size, "%s:",
+ cid_list->id[i].value);
+ if (count < 0 || count >= size) {
+ printk(KERN_ERR "acpi: %s cid[%i] exceeds event buffer size",
+ acpi_dev->pnp.device_name, i);
+ break;
+ }
+ len += count;
+ size -= count;
+ }
+ }
+
+ modalias[len] = '\0';
+ return len;
+}
+
+static ssize_t
+acpi_device_modalias_show(struct device *dev, struct device_attribute *attr, char *buf) {
+ struct acpi_device *acpi_dev = to_acpi_device(dev);
+ int len;
+
+ /* Device has no HID and no CID or string is >1024 */
+ len = create_modalias(acpi_dev, buf, 1024);
+ if (len <= 0)
+ return 0;
+ buf[len++] = '\n';
+ return len;
+}
+static DEVICE_ATTR(modalias, 0444, acpi_device_modalias_show, NULL);
+
static int acpi_eject_operation(acpi_handle handle, int lockable)
{
struct acpi_object_list arg_list;
goto end;
}
+ if (dev->flags.hardware_id || dev->flags.compatible_ids){
+ result = device_create_file(&dev->dev, &dev_attr_modalias);
+ if(result)
+ goto end;
+ }
+
/*
* If device has _EJ0, 'eject' file is created that is used to trigger
* hot-removal function from userland.
if (ACPI_SUCCESS(status))
device_remove_file(&dev->dev, &dev_attr_eject);
+ if (dev->flags.hardware_id || dev->flags.compatible_ids)
+ device_remove_file(&dev->dev, &dev_attr_modalias);
+
if(dev->flags.hardware_id)
device_remove_file(&dev->dev, &dev_attr_hid);
if(dev->handle)
/* --------------------------------------------------------------------------
ACPI Bus operations
-------------------------------------------------------------------------- */
+
+int acpi_match_device_ids(struct acpi_device *device,
+ const struct acpi_device_id *ids)
+{
+ const struct acpi_device_id *id;
+
+ if (device->flags.hardware_id) {
+ for (id = ids; id->id[0]; id++) {
+ if (!strcmp((char*)id->id, device->pnp.hardware_id))
+ return 0;
+ }
+ }
+
+ if (device->flags.compatible_ids) {
+ struct acpi_compatible_id_list *cid_list = device->pnp.cid_list;
+ int i;
+
+ for (id = ids; id->id[0]; id++) {
+ /* compare multiple _CID entries against driver ids */
+ for (i = 0; i < cid_list->count; i++) {
+ if (!strcmp((char*)id->id,
+ cid_list->id[i].value))
+ return 0;
+ }
+ }
+ }
+
+ return -ENOENT;
+}
+EXPORT_SYMBOL(acpi_match_device_ids);
+
static void acpi_device_release(struct device *dev)
{
struct acpi_device *acpi_dev = to_acpi_device(dev);
struct acpi_device *acpi_dev = to_acpi_device(dev);
struct acpi_driver *acpi_drv = to_acpi_driver(drv);
- return !acpi_match_ids(acpi_dev, acpi_drv->ids);
+ return !acpi_match_device_ids(acpi_dev, acpi_drv->ids);
}
static int acpi_device_uevent(struct device *dev, char **envp, int num_envp,
- char *buffer, int buffer_size)
+ char *buffer, int buffer_size)
{
struct acpi_device *acpi_dev = to_acpi_device(dev);
- int i = 0, length = 0, ret = 0;
-
- if (acpi_dev->flags.hardware_id)
- ret = add_uevent_var(envp, num_envp, &i,
- buffer, buffer_size, &length,
- "HWID=%s", acpi_dev->pnp.hardware_id);
- if (ret)
- return -ENOMEM;
- if (acpi_dev->flags.compatible_ids) {
- int j;
- struct acpi_compatible_id_list *cid_list;
- cid_list = acpi_dev->pnp.cid_list;
-
- for (j = 0; j < cid_list->count; j++) {
- ret = add_uevent_var(envp, num_envp, &i, buffer,
- buffer_size, &length, "COMPTID=%s",
- cid_list->id[j].value);
- if (ret)
- return -ENOMEM;
- }
+ strcpy(buffer, "MODALIAS=");
+ if (create_modalias(acpi_dev, buffer + 9, buffer_size - 9) > 0) {
+ envp[0] = buffer;
+ envp[1] = NULL;
}
-
- envp[i] = NULL;
return 0;
}
return;
}
-int acpi_match_ids(struct acpi_device *device, char *ids)
-{
- if (device->flags.hardware_id)
- if (strstr(ids, device->pnp.hardware_id))
- return 0;
-
- if (device->flags.compatible_ids) {
- struct acpi_compatible_id_list *cid_list = device->pnp.cid_list;
- int i;
-
- /* compare multiple _CID entries against driver ids */
- for (i = 0; i < cid_list->count; i++) {
- if (strstr(ids, cid_list->id[i].value))
- return 0;
- }
- }
- return -ENOENT;
-}
-
static int acpi_bus_get_perf_flags(struct acpi_device *device)
{
device->performance.state = ACPI_STATE_UNKNOWN;
struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
union acpi_object *package = NULL;
+ struct acpi_device_id button_device_ids[] = {
+ {"PNP0C0D", 0},
+ {"PNP0C0C", 0},
+ {"PNP0C0E", 0},
+ {"", 0},
+ };
+
/* _PRW */
status = acpi_evaluate_object(device->handle, "_PRW", NULL, &buffer);
device->wakeup.flags.valid = 1;
/* Power button, Lid switch always enable wakeup */
- if (!acpi_match_ids(device, "PNP0C0D,PNP0C0C,PNP0C0E"))
+ if (!acpi_match_device_ids(device, button_device_ids))
device->wakeup.flags.run_wake = 1;
end:
obj-y := poweroff.o wakeup.o
-obj-$(CONFIG_ACPI_SLEEP) += main.o
-obj-$(CONFIG_ACPI_SLEEP_PROC_FS) += proc.o
+obj-y += main.o
+obj-$(CONFIG_X86) += proc.o
EXTRA_CFLAGS += $(ACPI_CFLAGS)
static int init_8259A_after_S1;
+extern int acpi_sleep_prepare(u32 acpi_state);
+extern void acpi_power_off(void);
+
+static u32 acpi_target_sleep_state = ACPI_STATE_S0;
+
+/**
+ * acpi_pm_set_target - Set the target system sleep state to the state
+ * associated with given @pm_state, if supported.
+ */
+
+static int acpi_pm_set_target(suspend_state_t pm_state)
+{
+ u32 acpi_state = acpi_suspend_states[pm_state];
+ int error = 0;
+
+ if (sleep_states[acpi_state]) {
+ acpi_target_sleep_state = acpi_state;
+ } else {
+ printk(KERN_ERR "ACPI does not support this state: %d\n",
+ pm_state);
+ error = -ENOSYS;
+ }
+ return error;
+}
+
/**
* acpi_pm_prepare - Do preliminary suspend work.
- * @pm_state: suspend state we're entering.
+ * @pm_state: ignored
*
- * Make sure we support the state. If we do, and we need it, set the
- * firmware waking vector and do arch-specific nastiness to get the
- * wakeup code to the waking vector.
+ * If necessary, set the firmware waking vector and do arch-specific
+ * nastiness to get the wakeup code to the waking vector.
*/
-extern int acpi_sleep_prepare(u32 acpi_state);
-extern void acpi_power_off(void);
-
static int acpi_pm_prepare(suspend_state_t pm_state)
{
- u32 acpi_state = acpi_suspend_states[pm_state];
+ int error = acpi_sleep_prepare(acpi_target_sleep_state);
- if (!sleep_states[acpi_state]) {
- printk("acpi_pm_prepare does not support %d \n", pm_state);
- return -EPERM;
- }
- return acpi_sleep_prepare(acpi_state);
+ if (error)
+ acpi_target_sleep_state = ACPI_STATE_S0;
+
+ return error;
}
/**
* acpi_pm_enter - Actually enter a sleep state.
- * @pm_state: State we're entering.
+ * @pm_state: ignored
*
- * Flush caches and go to sleep. For STR or STD, we have to call
- * arch-specific assembly, which in turn call acpi_enter_sleep_state().
+ * Flush caches and go to sleep. For STR we have to call arch-specific
+ * assembly, which in turn call acpi_enter_sleep_state().
* It's unfortunate, but it works. Please fix if you're feeling frisky.
*/
{
acpi_status status = AE_OK;
unsigned long flags = 0;
- u32 acpi_state = acpi_suspend_states[pm_state];
+ u32 acpi_state = acpi_target_sleep_state;
ACPI_FLUSH_CPU_CACHE();
/* Do arch specific saving of state. */
- if (pm_state > PM_SUSPEND_STANDBY) {
+ if (acpi_state == ACPI_STATE_S3) {
int error = acpi_save_state_mem();
- if (error)
+
+ if (error) {
+ acpi_target_sleep_state = ACPI_STATE_S0;
return error;
+ }
}
local_irq_save(flags);
acpi_enable_wakeup_device(acpi_state);
- switch (pm_state) {
- case PM_SUSPEND_STANDBY:
+ switch (acpi_state) {
+ case ACPI_STATE_S1:
barrier();
status = acpi_enter_sleep_state(acpi_state);
break;
- case PM_SUSPEND_MEM:
+ case ACPI_STATE_S3:
do_suspend_lowlevel();
break;
-
- default:
- return -EINVAL;
}
/* ACPI 3.0 specs (P62) says that it's the responsabilty
local_irq_restore(flags);
printk(KERN_DEBUG "Back to C!\n");
- /* restore processor state
- * We should only be here if we're coming back from STR or STD.
- * And, in the case of the latter, the memory image should have already
- * been loaded from disk.
- */
- if (pm_state > PM_SUSPEND_STANDBY)
+ /* restore processor state */
+ if (acpi_state == ACPI_STATE_S3)
acpi_restore_state_mem();
return ACPI_SUCCESS(status) ? 0 : -EFAULT;
/**
* acpi_pm_finish - Finish up suspend sequence.
- * @pm_state: State we're coming out of.
+ * @pm_state: ignored
*
* This is called after we wake back up (or if entering the sleep state
* failed).
static int acpi_pm_finish(suspend_state_t pm_state)
{
- u32 acpi_state = acpi_suspend_states[pm_state];
+ u32 acpi_state = acpi_target_sleep_state;
acpi_leave_sleep_state(acpi_state);
acpi_disable_wakeup_device(acpi_state);
/* reset firmware waking vector */
acpi_set_firmware_waking_vector((acpi_physical_address) 0);
+ acpi_target_sleep_state = ACPI_STATE_S0;
+
+#ifdef CONFIG_X86
if (init_8259A_after_S1) {
printk("Broken toshiba laptop -> kicking interrupts\n");
init_8259A(0);
}
+#endif
return 0;
}
static struct pm_ops acpi_pm_ops = {
.valid = acpi_pm_state_valid,
+ .set_target = acpi_pm_set_target,
.prepare = acpi_pm_prepare,
.enter = acpi_pm_enter,
.finish = acpi_pm_finish,
};
#endif /* CONFIG_SOFTWARE_SUSPEND */
+/**
+ * acpi_pm_device_sleep_state - return preferred power state of ACPI device
+ * in the system sleep state given by %acpi_target_sleep_state
+ * @dev: device to examine
+ * @wake: if set, the device should be able to wake up the system
+ * @d_min_p: used to store the upper limit of allowed states range
+ * Return value: preferred power state of the device on success, -ENODEV on
+ * failure (ie. if there's no 'struct acpi_device' for @dev)
+ *
+ * Find the lowest power (highest number) ACPI device power state that
+ * device @dev can be in while the system is in the sleep state represented
+ * by %acpi_target_sleep_state. If @wake is nonzero, the device should be
+ * able to wake up the system from this sleep state. If @d_min_p is set,
+ * the highest power (lowest number) device power state of @dev allowed
+ * in this system sleep state is stored at the location pointed to by it.
+ *
+ * The caller must ensure that @dev is valid before using this function.
+ * The caller is also responsible for figuring out if the device is
+ * supposed to be able to wake up the system and passing this information
+ * via @wake.
+ */
+
+int acpi_pm_device_sleep_state(struct device *dev, int wake, int *d_min_p)
+{
+ acpi_handle handle = DEVICE_ACPI_HANDLE(dev);
+ struct acpi_device *adev;
+ char acpi_method[] = "_SxD";
+ unsigned long d_min, d_max;
+
+ if (!handle || ACPI_FAILURE(acpi_bus_get_device(handle, &adev))) {
+ printk(KERN_ERR "ACPI handle has no context!\n");
+ return -ENODEV;
+ }
+
+ acpi_method[2] = '0' + acpi_target_sleep_state;
+ /*
+ * If the sleep state is S0, we will return D3, but if the device has
+ * _S0W, we will use the value from _S0W
+ */
+ d_min = ACPI_STATE_D0;
+ d_max = ACPI_STATE_D3;
+
+ /*
+ * If present, _SxD methods return the minimum D-state (highest power
+ * state) we can use for the corresponding S-states. Otherwise, the
+ * minimum D-state is D0 (ACPI 3.x).
+ *
+ * NOTE: We rely on acpi_evaluate_integer() not clobbering the integer
+ * provided -- that's our fault recovery, we ignore retval.
+ */
+ if (acpi_target_sleep_state > ACPI_STATE_S0)
+ acpi_evaluate_integer(handle, acpi_method, NULL, &d_min);
+
+ /*
+ * If _PRW says we can wake up the system from the target sleep state,
+ * the D-state returned by _SxD is sufficient for that (we assume a
+ * wakeup-aware driver if wake is set). Still, if _SxW exists
+ * (ACPI 3.x), it should return the maximum (lowest power) D-state that
+ * can wake the system. _S0W may be valid, too.
+ */
+ if (acpi_target_sleep_state == ACPI_STATE_S0 ||
+ (wake && adev->wakeup.state.enabled &&
+ adev->wakeup.sleep_state <= acpi_target_sleep_state)) {
+ acpi_method[3] = 'W';
+ acpi_evaluate_integer(handle, acpi_method, NULL, &d_max);
+ /* Sanity check */
+ if (d_max < d_min)
+ d_min = d_max;
+ }
+
+ if (d_min_p)
+ *d_min_p = d_min;
+ return d_max;
+}
+
/*
* Toshiba fails to preserve interrupts over S1, reinitialization
* of 8259 is needed after S1 resume.
int acpi_sleep_prepare(u32 acpi_state)
{
-#ifdef CONFIG_ACPI_SLEEP
/* do we have a wakeup address for S2 and S3? */
if (acpi_state == ACPI_STATE_S3) {
if (!acpi_wakeup_address) {
}
ACPI_FLUSH_CPU_CACHE();
acpi_enable_wakeup_device_prep(acpi_state);
-#endif
acpi_gpe_sleep_prepare(acpi_state);
acpi_enter_sleep_state_prep(acpi_state);
return 0;
#include "sleep.h"
#define _COMPONENT ACPI_SYSTEM_COMPONENT
+
+/*
+ * this file provides support for:
+ * /proc/acpi/sleep
+ * /proc/acpi/alarm
+ * /proc/acpi/wakeup
+ */
+
ACPI_MODULE_NAME("sleep")
-#ifdef CONFIG_ACPI_SLEEP_PROC_SLEEP
+#ifdef CONFIG_ACPI_PROCFS
static int acpi_system_sleep_seq_show(struct seq_file *seq, void *offset)
{
int i;
Done:
return error ? error : count;
}
-#endif /* CONFIG_ACPI_SLEEP_PROC_SLEEP */
+#endif /* CONFIG_ACPI_PROCFS */
#if defined(CONFIG_RTC_DRV_CMOS) || defined(CONFIG_RTC_DRV_CMOS_MODULE)
/* use /sys/class/rtc/rtcX/wakealarm instead; it's not ACPI-specific */
.release = single_release,
};
-#ifdef CONFIG_ACPI_SLEEP_PROC_SLEEP
+#ifdef CONFIG_ACPI_PROCFS
static const struct file_operations acpi_system_sleep_fops = {
.open = acpi_system_sleep_open_fs,
.read = seq_read,
.llseek = seq_lseek,
.release = single_release,
};
-#endif /* CONFIG_ACPI_SLEEP_PROC_SLEEP */
+#endif /* CONFIG_ACPI_PROCFS */
#ifdef HAVE_ACPI_LEGACY_ALARM
static const struct file_operations acpi_system_alarm_fops = {
if (acpi_disabled)
return 0;
-#ifdef CONFIG_ACPI_SLEEP_PROC_SLEEP
+#ifdef CONFIG_ACPI_PROCFS
/* 'sleep' [R/W] */
entry =
create_proc_entry("sleep", S_IFREG | S_IRUGO | S_IWUSR,
acpi_root_dir);
if (entry)
entry->proc_fops = &acpi_system_sleep_fops;
-#endif
+#endif /* CONFIG_ACPI_PROCFS */
#ifdef HAVE_ACPI_LEGACY_ALARM
/* 'alarm' [R/W] */
extern struct list_head acpi_wakeup_device_list;
extern spinlock_t acpi_device_lock;
-#ifdef CONFIG_ACPI_SLEEP
/**
* acpi_enable_wakeup_device_prep - prepare wakeup devices
* @sleep_state: ACPI state
}
late_initcall(acpi_wakeup_device_init);
-#endif
/*
* Disable all wakeup GPEs before entering requested sleep state.
static ssize_t acpi_thermal_write_polling(struct file *, const char __user *,
size_t, loff_t *);
+static const struct acpi_device_id thermal_device_ids[] = {
+ {ACPI_THERMAL_HID, 0},
+ {"", 0},
+};
+MODULE_DEVICE_TABLE(acpi, thermal_device_ids);
+
static struct acpi_driver acpi_thermal_driver = {
.name = "thermal",
.class = ACPI_THERMAL_CLASS,
- .ids = ACPI_THERMAL_HID,
+ .ids = thermal_device_ids,
.ops = {
.add = acpi_thermal_add,
.remove = acpi_thermal_remove,
acpi_status
acpi_ut_execute_HID(struct acpi_namespace_node *device_node,
- struct acpi_device_id *hid)
+ struct acpica_device_id *hid)
{
union acpi_operand_object *obj_desc;
acpi_status status;
acpi_status
acpi_ut_execute_UID(struct acpi_namespace_node *device_node,
- struct acpi_device_id *uid)
+ struct acpica_device_id *uid)
{
union acpi_operand_object *obj_desc;
acpi_status status;
static int acpi_video_bus_add(struct acpi_device *device);
static int acpi_video_bus_remove(struct acpi_device *device, int type);
+static const struct acpi_device_id video_device_ids[] = {
+ {ACPI_VIDEO_HID, 0},
+ {"", 0},
+};
+MODULE_DEVICE_TABLE(acpi, video_device_ids);
+
static struct acpi_driver acpi_video_bus = {
.name = "video",
.class = ACPI_VIDEO_CLASS,
- .ids = ACPI_VIDEO_HID,
+ .ids = video_device_ids,
.ops = {
.add = acpi_video_bus_add,
.remove = acpi_video_bus_remove,
return -EINVAL;
}
+static const struct acpi_device_id hpet_device_ids[] = {
+ {"PNP0103", 0},
+ {"", 0},
+};
+MODULE_DEVICE_TABLE(acpi, hpet_device_ids);
+
static struct acpi_driver hpet_acpi_driver = {
.name = "hpet",
- .ids = "PNP0103",
+ .ids = hpet_device_ids,
.ops = {
.add = hpet_acpi_add,
.remove = hpet_acpi_remove,
#define ACPI_ATLAS_NAME "Atlas ACPI"
#define ACPI_ATLAS_CLASS "Atlas"
-#define ACPI_ATLAS_BUTTON_HID "ASIM0000"
static struct input_dev *input_dev;
return status;
}
+static const struct acpi_device_id atlas_device_ids[] = {
+ {"ASIM0000", 0},
+ {"", 0},
+};
+MODULE_DEVICE_TABLE(acpi, atlas_device_ids);
+
static struct acpi_driver atlas_acpi_driver = {
.name = ACPI_ATLAS_NAME,
.class = ACPI_ATLAS_CLASS,
- .ids = ACPI_ATLAS_BUTTON_HID,
+ .ids = atlas_device_ids,
.ops = {
.add = atlas_acpi_button_add,
.remove = atlas_acpi_button_remove,
#define ASUS_HOTK_NAME "Asus Laptop Support"
#define ASUS_HOTK_CLASS "hotkey"
#define ASUS_HOTK_DEVICE_NAME "Hotkey"
-#define ASUS_HOTK_HID "ATK0100"
#define ASUS_HOTK_FILE "asus-laptop"
#define ASUS_HOTK_PREFIX "\\_SB.ATKD."
/*
* The hotkey driver declaration
*/
+static const struct acpi_device_id asus_device_ids[] = {
+ {"ATK0100", 0},
+ {"", 0},
+};
+MODULE_DEVICE_TABLE(acpi, asus_device_ids);
+
static int asus_hotk_add(struct acpi_device *device);
static int asus_hotk_remove(struct acpi_device *device, int type);
static struct acpi_driver asus_hotk_driver = {
.name = ASUS_HOTK_NAME,
.class = ASUS_HOTK_CLASS,
- .ids = ASUS_HOTK_HID,
+ .ids = asus_device_ids,
.ops = {
.add = asus_hotk_add,
.remove = asus_hotk_remove,
return 0;
}
+static const struct acpi_device_id sony_device_ids[] = {
+ {SONY_NC_HID, 0},
+ {SONY_PIC_HID, 0},
+ {"", 0},
+};
+MODULE_DEVICE_TABLE(acpi, sony_device_ids);
+
+static const struct acpi_device_id sony_nc_device_ids[] = {
+ {SONY_NC_HID, 0},
+ {"", 0},
+};
+
static struct acpi_driver sony_nc_driver = {
.name = SONY_NC_DRIVER_NAME,
.class = SONY_NC_CLASS,
- .ids = SONY_NC_HID,
+ .ids = sony_nc_device_ids,
.owner = THIS_MODULE,
.ops = {
.add = sony_nc_add,
return 0;
}
+static const struct acpi_device_id sony_pic_device_ids[] = {
+ {SONY_PIC_HID, 0},
+ {"", 0},
+};
+
static struct acpi_driver sony_pic_driver = {
.name = SONY_PIC_DRIVER_NAME,
.class = SONY_PIC_CLASS,
- .ids = SONY_PIC_HID,
+ .ids = sony_pic_device_ids,
.owner = THIS_MODULE,
.ops = {
.add = sony_pic_add,
sprintf(ibm->acpi->driver->name, "%s_%s", IBM_NAME, ibm->name);
ibm->acpi->driver->ids = ibm->acpi->hid;
+
ibm->acpi->driver->ops.add = &tpacpi_device_add;
rc = acpi_bus_register_driver(ibm->acpi->driver);
if (rc < 0) {
printk(IBM_ERR "acpi_bus_register_driver(%s) failed: %d\n",
- ibm->acpi->hid, rc);
+ ibm->name, rc);
kfree(ibm->acpi->driver);
ibm->acpi->driver = NULL;
} else if (!rc)
return res;
}
+static const struct acpi_device_id ibm_htk_device_ids[] = {
+ {IBM_HKEY_HID, 0},
+ {"", 0},
+};
+
static struct tp_acpi_drv_struct ibm_hotkey_acpidriver = {
- .hid = IBM_HKEY_HID,
+ .hid = ibm_htk_device_ids,
.notify = hotkey_notify,
.handle = &hkey_handle,
.type = ACPI_DEVICE_NOTIFY,
/* don't list other alternatives as we install a notify handler on the 570 */
IBM_HANDLE(pci, root, "\\_SB.PCI"); /* 570 */
+static const struct acpi_device_id ibm_pci_device_ids[] = {
+ {PCI_ROOT_HID_STRING, 0},
+ {"", 0},
+};
+
static struct tp_acpi_drv_struct ibm_dock_acpidriver[2] = {
{
.notify = dock_notify,
/* THIS ONE MUST NEVER BE USED FOR DRIVER AUTOLOADING.
* We just use it to get notifications of dock hotplug
* in very old thinkpads */
- .hid = PCI_ROOT_HID_STRING,
+ .hid = ibm_pci_device_ids,
.notify = dock_notify,
.handle = &pci_handle,
.type = ACPI_SYSTEM_NOTIFY,
static void dock_notify(struct ibm_struct *ibm, u32 event)
{
int docked = dock_docked();
- int pci = ibm->acpi->hid && strstr(ibm->acpi->hid, PCI_ROOT_HID_STRING);
+ int pci = ibm->acpi->hid && ibm->acpi->device &&
+ acpi_match_device_ids(ibm->acpi->device, ibm_pci_device_ids);
if (event == 1 && !pci) /* 570 */
acpi_bus_generate_event(ibm->acpi->device, event, 1); /* button */
struct ibm_struct;
struct tp_acpi_drv_struct {
- char *hid;
+ const struct acpi_device_id *hid;
struct acpi_driver *driver;
void (*notify) (struct ibm_struct *, u32);
* currently we simply return _SxD, if present.
*/
-static int acpi_pci_choose_state(struct pci_dev *pdev, pm_message_t state)
+static pci_power_t acpi_pci_choose_state(struct pci_dev *pdev,
+ pm_message_t state)
{
- /* TBD */
-
- return -ENODEV;
+ int acpi_state;
+
+ acpi_state = acpi_pm_device_sleep_state(&pdev->dev,
+ device_may_wakeup(&pdev->dev), NULL);
+ if (acpi_state < 0)
+ return PCI_POWER_ERROR;
+
+ switch (acpi_state) {
+ case ACPI_STATE_D0:
+ return PCI_D0;
+ case ACPI_STATE_D1:
+ return PCI_D1;
+ case ACPI_STATE_D2:
+ return PCI_D2;
+ case ACPI_STATE_D3:
+ return PCI_D3hot;
+ }
+ return PCI_POWER_ERROR;
}
static int acpi_pci_set_power_state(struct pci_dev *dev, pci_power_t state)
{
acpi_handle handle = DEVICE_ACPI_HANDLE(&dev->dev);
+ acpi_handle tmp;
static int state_conv[] = {
[0] = 0,
[1] = 1,
if (!handle)
return -ENODEV;
+ /* If the ACPI device has _EJ0, ignore the device */
+ if (ACPI_SUCCESS(acpi_get_handle(handle, "_EJ0", &tmp)))
+ return 0;
return acpi_bus_set_power(handle, acpi_state);
}
return 0;
}
-int (*platform_pci_choose_state)(struct pci_dev *dev, pm_message_t state);
+pci_power_t (*platform_pci_choose_state)(struct pci_dev *dev, pm_message_t state);
/**
* pci_choose_state - Choose the power state of a PCI device
pci_power_t pci_choose_state(struct pci_dev *dev, pm_message_t state)
{
- int ret;
+ pci_power_t ret;
if (!pci_find_capability(dev, PCI_CAP_ID_PM))
return PCI_D0;
if (platform_pci_choose_state) {
ret = platform_pci_choose_state(dev, state);
- if (ret >= 0)
- state.event = ret;
+ if (ret != PCI_POWER_ERROR)
+ return ret;
}
switch (state.event) {
resource_size_t, resource_size_t),
void *alignf_data);
/* Firmware callbacks */
-extern int (*platform_pci_choose_state)(struct pci_dev *dev, pm_message_t state);
+extern pci_power_t (*platform_pci_choose_state)(struct pci_dev *dev, pm_message_t state);
extern int (*platform_pci_set_power_state)(struct pci_dev *dev, pci_power_t state);
extern int pci_user_read_config_byte(struct pci_dev *dev, int where, u8 *val);
return error;
}
+ if (pnp_dev->protocol && pnp_dev->protocol->suspend)
+ pnp_dev->protocol->suspend(pnp_dev, state);
return 0;
}
if (!pnp_drv)
return 0;
+ if (pnp_dev->protocol && pnp_dev->protocol->resume)
+ pnp_dev->protocol->resume(pnp_dev);
+
if (!(pnp_drv->flags & PNP_DRIVER_RES_DO_NOT_CHANGE)) {
error = pnp_start_dev(pnp_dev);
if (error)
#include <linux/acpi.h>
#include <linux/pnp.h>
+#include <linux/mod_devicetable.h>
#include <acpi/acpi_bus.h>
+#include <acpi/actypes.h>
+
#include "pnpacpi.h"
static int num = 0;
* have irqs (PIC, Timer) because we call acpi_register_gsi.
* Finaly only devices that have a CRS method need to be in this list.
*/
-static char __initdata excluded_id_list[] =
- "PNP0C09," /* EC */
- "PNP0C0F," /* Link device */
- "PNP0000," /* PIC */
- "PNP0100," /* Timer */
- ;
+static __initdata struct acpi_device_id excluded_id_list[] ={
+ {"PNP0C09", 0}, /* EC */
+ {"PNP0C0F", 0}, /* Link device */
+ {"PNP0000", 0}, /* PIC */
+ {"PNP0100", 0}, /* Timer */
+ {"", 0},
+};
+
static inline int is_exclusive_device(struct acpi_device *dev)
{
- return (!acpi_match_ids(dev, excluded_id_list));
+ return (!acpi_match_device_ids(dev, excluded_id_list));
}
/*
return ACPI_FAILURE(status) ? -ENODEV : 0;
}
+static int pnpacpi_suspend(struct pnp_dev *dev, pm_message_t state)
+{
+ return acpi_bus_set_power((acpi_handle)dev->data,
+ acpi_pm_device_sleep_state(&dev->dev,
+ device_may_wakeup(&dev->dev), NULL));
+}
+
+static int pnpacpi_resume(struct pnp_dev *dev)
+{
+ return acpi_bus_set_power((acpi_handle)dev->data, ACPI_STATE_D0);
+}
+
static struct pnp_protocol pnpacpi_protocol = {
.name = "Plug and Play ACPI",
.get = pnpacpi_get_resources,
.set = pnpacpi_set_resources,
.disable = pnpacpi_disable_resources,
+ .suspend = pnpacpi_suspend,
+ .resume = pnpacpi_resume,
};
static int __init pnpacpi_add_device(struct acpi_device *device)
struct acpi_driver {
char name[80];
char class[80];
- char *ids; /* Supported Hardware IDs */
+ const struct acpi_device_id *ids; /* Supported Hardware IDs */
struct acpi_device_ops ops;
struct device_driver drv;
struct module *owner;
int acpi_bus_trim(struct acpi_device *start, int rmdevice);
int acpi_bus_start(struct acpi_device *device);
acpi_status acpi_bus_get_ejd(acpi_handle handle, acpi_handle * ejd);
-int acpi_match_ids(struct acpi_device *device, char *ids);
+int acpi_match_device_ids(struct acpi_device *device,
+ const struct acpi_device_id *ids);
int acpi_create_dir(struct acpi_device *);
void acpi_remove_dir(struct acpi_device *);
acpi_handle acpi_get_pci_rootbridge_handle(unsigned int, unsigned int);
#define DEVICE_ACPI_HANDLE(dev) ((acpi_handle)((dev)->archdata.acpi_handle))
+int acpi_pm_device_sleep_state(struct device *, int, int *);
+
#endif /* CONFIG_ACPI */
#endif /*__ACPI_BUS_H__*/
#define ACPI_BUS_COMPONENT 0x00010000
#define ACPI_SYSTEM_COMPONENT 0x02000000
-/* _HID definitions */
+/*
+ * _HID definitions
+ * HIDs must conform to ACPI spec(6.1.4)
+ * Linux specific HIDs do not apply to this and begin with LNX:
+ */
-#define ACPI_POWER_HID "power_resource"
+#define ACPI_POWER_HID "LNXPOWER"
#define ACPI_PROCESSOR_HID "ACPI0007"
-#define ACPI_SYSTEM_HID "acpi_system"
-#define ACPI_THERMAL_HID "thermal"
-#define ACPI_BUTTON_HID_POWERF "button_power"
-#define ACPI_BUTTON_HID_SLEEPF "button_sleep"
-#define ACPI_VIDEO_HID "video"
-#define ACPI_BAY_HID "bay"
+#define ACPI_SYSTEM_HID "LNXSYSTM"
+#define ACPI_THERMAL_HID "LNXTHERM"
+#define ACPI_BUTTON_HID_POWERF "LNXPWRBN"
+#define ACPI_BUTTON_HID_SLEEPF "LNXSLPBN"
+#define ACPI_VIDEO_HID "LNXVIDEO"
+#define ACPI_BAY_HID "LNXIOBAY"
+
/* --------------------------------------------------------------------------
PCI
-------------------------------------------------------------------------- */
/*--------------------------------------------------------------------------
Suspend/Resume
-------------------------------------------------------------------------- */
-#ifdef CONFIG_ACPI_SLEEP
extern int acpi_sleep_init(void);
-#else
-#define acpi_sleep_init() do {} while (0)
-#endif
#endif /*__ACPI_DRIVERS_H__*/
/* Common string version of device HIDs and UIDs */
-struct acpi_device_id {
+struct acpica_device_id {
char value[ACPI_DEVICE_ID_LENGTH];
};
u32 valid; /* Indicates which fields below are valid */
u32 current_status; /* _STA value */
acpi_integer address; /* _ADR value if any */
- struct acpi_device_id hardware_id; /* _HID value if any */
- struct acpi_device_id unique_id; /* _UID value if any */
+ struct acpica_device_id hardware_id; /* _HID value if any */
+ struct acpica_device_id unique_id; /* _UID value if any */
u8 highest_dstates[4]; /* _sx_d values: 0xFF indicates not valid */
struct acpi_compatible_id_list compatibility_id; /* List of _CIDs if any */
};
acpi_status
acpi_ut_execute_HID(struct acpi_namespace_node *device_node,
- struct acpi_device_id *hid);
+ struct acpica_device_id *hid);
acpi_status
acpi_ut_execute_CID(struct acpi_namespace_node *device_node,
acpi_status
acpi_ut_execute_UID(struct acpi_namespace_node *device_node,
- struct acpi_device_id *uid);
+ struct acpica_device_id *uid);
acpi_status
acpi_ut_execute_sxds(struct acpi_namespace_node *device_node, u8 * highest);
}
extern int acpi_irq_balance_set(char *str);
-#else /* !CONFIG_ACPI */
-
-#define acpi_lapic 0
-#define acpi_ioapic 0
-static inline void acpi_noirq_set(void) { }
-static inline void acpi_disable_pci(void) { }
-static inline void disable_acpi(void) { }
-
-#endif /* !CONFIG_ACPI */
-
-
-#ifdef CONFIG_ACPI_SLEEP
-
/* routines for saving/restoring kernel state */
extern int acpi_save_state_mem(void);
extern void acpi_restore_state_mem(void);
/* early initialization routine */
extern void acpi_reserve_bootmem(void);
-#endif /*CONFIG_ACPI_SLEEP*/
+#else /* !CONFIG_ACPI */
+
+#define acpi_lapic 0
+#define acpi_ioapic 0
+static inline void acpi_noirq_set(void) { }
+static inline void acpi_disable_pci(void) { }
+static inline void disable_acpi(void) { }
+
+#endif /* !CONFIG_ACPI */
#define ARCH_HAS_POWER_INIT 1
unsigned long return_address;
} __attribute__((packed));
-#ifdef CONFIG_ACPI_SLEEP
+#ifdef CONFIG_ACPI
extern unsigned long saved_eip;
extern unsigned long saved_esp;
extern unsigned long saved_ebp;
int acpi_request_vector (u32 int_type);
int acpi_gsi_to_irq (u32 gsi, unsigned int *irq);
+/* routines for saving/restoring kernel state */
+extern int acpi_save_state_mem(void);
+extern void acpi_restore_state_mem(void);
+extern unsigned long acpi_wakeup_address;
+
/*
* Record the cpei override flag and current logical cpu. This is
* useful for CPU removal.
}
extern int acpi_irq_balance_set(char *str);
+/* routines for saving/restoring kernel state */
+extern int acpi_save_state_mem(void);
+extern void acpi_restore_state_mem(void);
+
+extern unsigned long acpi_wakeup_address;
+
+/* early initialization routine */
+extern void acpi_reserve_bootmem(void);
+
#else /* !CONFIG_ACPI */
#define acpi_lapic 0
extern int acpi_scan_nodes(unsigned long start, unsigned long end);
#define NR_NODE_MEMBLKS (MAX_NUMNODES*2)
-#ifdef CONFIG_ACPI_SLEEP
-
-/* routines for saving/restoring kernel state */
-extern int acpi_save_state_mem(void);
-extern void acpi_restore_state_mem(void);
-
-extern unsigned long acpi_wakeup_address;
-
-/* early initialization routine */
-extern void acpi_reserve_bootmem(void);
-
-#endif /*CONFIG_ACPI_SLEEP*/
-
extern int acpi_disabled;
extern int acpi_pci_disabled;
extern void fix_processor_context(void);
-#ifdef CONFIG_ACPI_SLEEP
extern unsigned long saved_rip;
extern unsigned long saved_rsp;
extern unsigned long saved_rbp;
/* routines for saving/restoring kernel state */
extern int acpi_save_state_mem(void);
-#endif
#endif
#include <linux/list.h>
+#include <linux/mod_devicetable.h>
#include <acpi/acpi.h>
#include <acpi/acpi_bus.h>
#define AP_DEVICE_ID_MATCH_DEVICE_TYPE 0x01
+#define ACPI_ID_LEN 9
+
+struct acpi_device_id {
+ __u8 id[ACPI_ID_LEN];
+ kernel_ulong_t driver_data;
+};
#define PNP_ID_LEN 8
#define PNP_MAX_DEVICES 8
int (*set)(struct pnp_dev *dev, struct pnp_resource_table *res);
int (*disable)(struct pnp_dev *dev);
+ /* protocol specific suspend/resume */
+ int (*suspend)(struct pnp_dev *dev, pm_message_t state);
+ int (*resume)(struct pnp_dev *dev);
+
/* used by pnp layer only (look but don't touch) */
unsigned char number; /* protocol number*/
struct device dev; /* link to driver model */
.proc_handler = &proc_dointvec,
},
#endif
-#ifdef CONFIG_ACPI_SLEEP
+#if defined(CONFIG_ACPI) && defined(CONFIG_X86)
{
.ctl_name = KERN_ACPI_VIDEO_FLAGS,
.procname = "acpi_video_flags",
return 1;
}
+/* looks like: "acpi:ACPI0003 or acpi:PNP0C0B" or "acpi:LNXVIDEO" */
+static int do_acpi_entry(const char *filename,
+ struct acpi_device_id *id, char *alias)
+{
+ sprintf(alias, "acpi*:%s:", id->id);
+ return 1;
+}
+
/* looks like: "pnp:dD" */
static int do_pnp_entry(const char *filename,
struct pnp_device_id *id, char *alias)
do_table(symval, sym->st_size,
sizeof(struct serio_device_id), "serio",
do_serio_entry, mod);
+ else if (sym_is(symname, "__mod_acpi_device_table"))
+ do_table(symval, sym->st_size,
+ sizeof(struct acpi_device_id), "acpi",
+ do_acpi_entry, mod);
else if (sym_is(symname, "__mod_pnp_device_table"))
do_table(symval, sym->st_size,
sizeof(struct pnp_device_id), "pnp",
git://bbs.cooldavid.org / net-next-2.6.git / commitdiff