n) 4xx/Axon EMAC ethernet nodes
o) Xilinx IP cores
p) Freescale Synchronous Serial Interface
- q) USB EHCI controllers
+ q) USB EHCI controllers
+ r) Freescale Display Interface Unit
+ s) Freescale on board FPGA
+ t) Freescael MSI interrupt controller
VII - Marvell Discovery mv64[345]6x System Controller chips
1) The /system-controller node
pic@40000 {
linux,phandle = <40000>;
- clock-frequency = <0>;
interrupt-controller;
#address-cells = <0>;
reg = <40000 40000>;
- built-in;
compatible = "chrp,open-pic";
device_type = "open-pic";
- big-endian;
};
reg = <0xe8000000 32>;
};
+ t) Freescale MSI interrupt controller
+
+ Reguired properities:
+ - compatible : compatible list, contains 2 entries,
+ first is "fsl,CHIP-msi", where CHIP is the processor(mpc8610, mpc8572,
+ etc.) and the second is "fsl,mpic-msi" or "fsl,ipic-msi" depending on
+ the parent type.
+ - reg : should contain the address and the length of the shared message
+ interrupt register set.
+ - msi-available-ranges: use <start count> style section to define which
+ msi interrupt can be used in the 256 msi interrupts. This property is
+ optional, without this, all the 256 MSI interrupts can be used.
+ - interrupts : each one of the interrupts here is one entry per 32 MSIs,
+ and routed to the host interrupt controller. the interrupts should
+ be set as edge sensitive.
+ - interrupt-parent: the phandle for the interrupt controller
+ that services interrupts for this device. for 83xx cpu, the interrupts
+ are routed to IPIC, and for 85xx/86xx cpu the interrupts are routed
+ to MPIC.
+
+ Example
+ msi@41600 {
+ compatible = "fsl,mpc8610-msi", "fsl,mpic-msi";
+ reg = <0x41600 0x80>;
+ msi-available-ranges = <0 0x100>;
+ interrupts = <
+ 0xe0 0
+ 0xe1 0
+ 0xe2 0
+ 0xe3 0
+ 0xe4 0
+ 0xe5 0
+ 0xe6 0
+ 0xe7 0>;
+ interrupt-parent = <&mpic>;
+ };
+
+
VII - Marvell Discovery mv64[345]6x System Controller chips
===========================================================
pic@40000 {
linux,phandle = <40000>;
- clock-frequency = <0>;
interrupt-controller;
#address-cells = <0>;
reg = <40000 40000>;
- built-in;
compatible = "chrp,open-pic";
device_type = "open-pic";
- big-endian;
};
i2c@3000 {
fixed-head.S ep88xc.c ep405.c \
cuboot-katmai.c cuboot-rainier.c redboot-8xx.c ep8248e.c \
cuboot-warp.c cuboot-85xx-cpm2.c cuboot-yosemite.c simpleboot.c \
- virtex405-head.S
+ virtex405-head.S redboot-83xx.c
src-boot := $(src-wlib) $(src-plat) empty.c
src-boot := $(addprefix $(obj)/, $(src-boot))
cuImage.mpc8349emitxgp
image-$(CONFIG_MPC834x_MDS) += cuImage.mpc834x_mds
image-$(CONFIG_MPC836x_MDS) += cuImage.mpc836x_mds
+image-$(CONFIG_ASP834x) += dtbImage.asp834x-redboot
# Board ports in arch/powerpc/platform/85xx/Kconfig
image-$(CONFIG_MPC8540_ADS) += cuImage.mpc8540ads
#include "ops.h"
#include "4xx.h"
#include "cuboot.h"
+#include "stdio.h"
#define TARGET_4xx
#define TARGET_44x
static bd_t bd;
-static void warp_fixups(void)
+static void warp_fixup_one_nor(u32 from, u32 to)
{
- unsigned long sysclk = 66000000;
+ void *devp;
+ char name[50];
+ u32 v[2];
+
+ sprintf(name, "/plb/opb/ebc/nor_flash@0,0/partition@%x", from);
+
+ devp = finddevice(name);
+ if (!devp)
+ return;
+
+ if (getprop(devp, "reg", v, sizeof(v)) == sizeof(v)) {
+ v[0] = to;
+ setprop(devp, "reg", v, sizeof(v));
+
+ printf("NOR 64M fixup %x -> %x\r\n", from, to);
+ }
+}
+
- ibm440ep_fixup_clocks(sysclk, 11059200, 50000000);
+static void warp_fixups(void)
+{
+ ibm440ep_fixup_clocks(66000000, 11059200, 50000000);
ibm4xx_sdram_fixup_memsize();
ibm4xx_fixup_ebc_ranges("/plb/opb/ebc");
dt_fixup_mac_address_by_alias("ethernet0", bd.bi_enetaddr);
+
+ /* Fixup for 64M flash on Rev A boards. */
+ if (bd.bi_flashsize == 0x4000000) {
+ void *devp;
+ u32 v[3];
+
+ devp = finddevice("/plb/opb/ebc/nor_flash@0,0");
+ if (!devp)
+ return;
+
+ /* Fixup the size */
+ if (getprop(devp, "reg", v, sizeof(v)) == sizeof(v)) {
+ v[2] = bd.bi_flashsize;
+ setprop(devp, "reg", v, sizeof(v));
+ }
+
+ /* Fixup parition offsets */
+ warp_fixup_one_nor(0x300000, 0x3f00000);
+ warp_fixup_one_nor(0x340000, 0x3f40000);
+ warp_fixup_one_nor(0x380000, 0x3f80000);
+ }
}
--- /dev/null
+/*
+ * Analogue & Micro ASP8347 Device Tree Source
+ *
+ * Copyright 2008 Codehermit
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+
+/ {
+ model = "Analogue & Micro ASP8347E";
+ compatible = "analogue-and-micro,asp8347e";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ aliases {
+ ethernet0 = &enet0;
+ ethernet1 = &enet1;
+ serial0 = &serial0;
+ serial1 = &serial1;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ PowerPC,8347@0 {
+ device_type = "cpu";
+ reg = <0x0>;
+ d-cache-line-size = <32>;
+ i-cache-line-size = <32>;
+ d-cache-size = <32768>;
+ i-cache-size = <32768>;
+ timebase-frequency = <0>; // from bootloader
+ bus-frequency = <0>; // from bootloader
+ clock-frequency = <0>; // from bootloader
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x8000000>; // 128MB at 0
+ };
+
+ localbus@ff005000 {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8347e-localbus",
+ "fsl,pq2pro-localbus",
+ "simple-bus";
+ reg = <0xff005000 0x1000>;
+ interrupts = <77 0x8>;
+ interrupt-parent = <&ipic>;
+
+ ranges = <
+ 0 0 0xf0000000 0x02000000
+ >;
+
+ flash@0,0 {
+ compatible = "cfi-flash";
+ reg = <0 0 0x02000000>;
+ bank-width = <2>;
+ device-width = <2>;
+ };
+ };
+
+ soc8349@ff000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "soc";
+ ranges = <0x0 0xff000000 0x00100000>;
+ reg = <0xff000000 0x00000200>;
+ bus-frequency = <0>;
+
+ wdt@200 {
+ device_type = "watchdog";
+ compatible = "mpc83xx_wdt";
+ reg = <0x200 0x100>;
+ };
+
+ i2c@3000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <0>;
+ compatible = "fsl-i2c";
+ reg = <0x3000 0x100>;
+ interrupts = <14 0x8>;
+ interrupt-parent = <&ipic>;
+ dfsrr;
+
+ rtc@68 {
+ compatible = "dallas,ds1374";
+ reg = <0x68>;
+ };
+ };
+
+ i2c@3100 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <1>;
+ compatible = "fsl-i2c";
+ reg = <0x3100 0x100>;
+ interrupts = <15 0x8>;
+ interrupt-parent = <&ipic>;
+ dfsrr;
+ };
+
+ spi@7000 {
+ cell-index = <0>;
+ compatible = "fsl,spi";
+ reg = <0x7000 0x1000>;
+ interrupts = <16 0x8>;
+ interrupt-parent = <&ipic>;
+ mode = "cpu";
+ };
+
+ /* phy type (ULPI or SERIAL) are only types supported for MPH */
+ /* port = 0 or 1 */
+ usb@22000 {
+ compatible = "fsl-usb2-mph";
+ reg = <0x22000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupt-parent = <&ipic>;
+ interrupts = <39 0x8>;
+ phy_type = "ulpi";
+ port1;
+ };
+ /* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */
+ usb@23000 {
+ compatible = "fsl-usb2-dr";
+ reg = <0x23000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupt-parent = <&ipic>;
+ interrupts = <38 0x8>;
+ dr_mode = "otg";
+ phy_type = "ulpi";
+ };
+
+ mdio@24520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-mdio";
+ reg = <0x24520 0x20>;
+
+ phy0: ethernet-phy@0 {
+ interrupt-parent = <&ipic>;
+ interrupts = <17 0x8>;
+ reg = <0x1>;
+ device_type = "ethernet-phy";
+ };
+ phy1: ethernet-phy@1 {
+ interrupt-parent = <&ipic>;
+ interrupts = <18 0x8>;
+ reg = <0x2>;
+ device_type = "ethernet-phy";
+ };
+ };
+
+ enet0: ethernet@24000 {
+ cell-index = <0>;
+ device_type = "network";
+ model = "TSEC";
+ compatible = "gianfar";
+ reg = <0x24000 0x1000>;
+ local-mac-address = [ 00 08 e5 11 32 33 ];
+ interrupts = <32 0x8 33 0x8 34 0x8>;
+ interrupt-parent = <&ipic>;
+ phy-handle = <&phy0>;
+ linux,network-index = <0>;
+ };
+
+ enet1: ethernet@25000 {
+ cell-index = <1>;
+ device_type = "network";
+ model = "TSEC";
+ compatible = "gianfar";
+ reg = <0x25000 0x1000>;
+ local-mac-address = [ 00 08 e5 11 32 34 ];
+ interrupts = <35 0x8 36 0x8 37 0x8>;
+ interrupt-parent = <&ipic>;
+ phy-handle = <&phy1>;
+ linux,network-index = <1>;
+ };
+
+ serial0: serial@4500 {
+ cell-index = <0>;
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <0x4500 0x100>;
+ clock-frequency = <400000000>;
+ interrupts = <9 0x8>;
+ interrupt-parent = <&ipic>;
+ };
+
+ serial1: serial@4600 {
+ cell-index = <1>;
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <0x4600 0x100>;
+ clock-frequency = <400000000>;
+ interrupts = <10 0x8>;
+ interrupt-parent = <&ipic>;
+ };
+
+ /* May need to remove if on a part without crypto engine */
+ crypto@30000 {
+ device_type = "crypto";
+ model = "SEC2";
+ compatible = "talitos";
+ reg = <0x30000 0x10000>;
+ interrupts = <11 0x8>;
+ interrupt-parent = <&ipic>;
+ num-channels = <4>;
+ channel-fifo-len = <24>;
+ exec-units-mask = <0x0000007e>;
+ /* desc mask is for rev2.0,
+ * we need runtime fixup for >2.0 */
+ descriptor-types-mask = <0x01010ebf>;
+ };
+
+ /* IPIC
+ * interrupts cell = <intr #, sense>
+ * sense values match linux IORESOURCE_IRQ_* defines:
+ * sense == 8: Level, low assertion
+ * sense == 2: Edge, high-to-low change
+ */
+ ipic: pic@700 {
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <2>;
+ reg = <0x700 0x100>;
+ device_type = "ipic";
+ };
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,38400 root=/dev/mtdblock3 rootfstype=jffs2";
+ linux,stdout-path = &serial0;
+ };
+
+};
* any warranty of any kind, whether express or implied.
*/
+/dts-v1/;
+
/ {
#address-cells = <2>;
#size-cells = <1>;
model = "amcc,bamboo";
compatible = "amcc,bamboo";
- dcr-parent = <&/cpus/cpu@0>;
+ dcr-parent = <&{/cpus/cpu@0}>;
aliases {
ethernet0 = &EMAC0;
cpu@0 {
device_type = "cpu";
model = "PowerPC,440EP";
- reg = <0>;
+ reg = <0x00000000>;
clock-frequency = <0>; /* Filled in by zImage */
timebase-frequency = <0>; /* Filled in by zImage */
- i-cache-line-size = <20>;
- d-cache-line-size = <20>;
- i-cache-size = <8000>;
- d-cache-size = <8000>;
+ i-cache-line-size = <32>;
+ d-cache-line-size = <32>;
+ i-cache-size = <32768>;
+ d-cache-size = <32768>;
dcr-controller;
dcr-access-method = "native";
};
memory {
device_type = "memory";
- reg = <0 0 0>; /* Filled in by zImage */
+ reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by zImage */
};
UIC0: interrupt-controller0 {
compatible = "ibm,uic-440ep","ibm,uic";
interrupt-controller;
cell-index = <0>;
- dcr-reg = <0c0 009>;
+ dcr-reg = <0x0c0 0x009>;
#address-cells = <0>;
#size-cells = <0>;
#interrupt-cells = <2>;
compatible = "ibm,uic-440ep","ibm,uic";
interrupt-controller;
cell-index = <1>;
- dcr-reg = <0d0 009>;
+ dcr-reg = <0x0d0 0x009>;
#address-cells = <0>;
#size-cells = <0>;
#interrupt-cells = <2>;
- interrupts = <1e 4 1f 4>; /* cascade */
+ interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
interrupt-parent = <&UIC0>;
};
SDR0: sdr {
compatible = "ibm,sdr-440ep";
- dcr-reg = <00e 002>;
+ dcr-reg = <0x00e 0x002>;
};
CPR0: cpr {
compatible = "ibm,cpr-440ep";
- dcr-reg = <00c 002>;
+ dcr-reg = <0x00c 0x002>;
};
plb {
SDRAM0: sdram {
compatible = "ibm,sdram-440ep", "ibm,sdram-405gp";
- dcr-reg = <010 2>;
+ dcr-reg = <0x010 0x002>;
};
DMA0: dma {
compatible = "ibm,dma-440ep", "ibm,dma-440gp";
- dcr-reg = <100 027>;
+ dcr-reg = <0x100 0x027>;
};
MAL0: mcmal {
compatible = "ibm,mcmal-440ep", "ibm,mcmal-440gp", "ibm,mcmal";
- dcr-reg = <180 62>;
+ dcr-reg = <0x180 0x062>;
num-tx-chans = <4>;
num-rx-chans = <2>;
interrupt-parent = <&MAL0>;
- interrupts = <0 1 2 3 4>;
+ interrupts = <0x0 0x1 0x2 0x3 0x4>;
#interrupt-cells = <1>;
#address-cells = <0>;
#size-cells = <0>;
- interrupt-map = </*TXEOB*/ 0 &UIC0 a 4
- /*RXEOB*/ 1 &UIC0 b 4
- /*SERR*/ 2 &UIC1 0 4
- /*TXDE*/ 3 &UIC1 1 4
- /*RXDE*/ 4 &UIC1 2 4>;
+ interrupt-map = </*TXEOB*/ 0x0 &UIC0 0xa 0x4
+ /*RXEOB*/ 0x1 &UIC0 0xb 0x4
+ /*SERR*/ 0x2 &UIC1 0x0 0x4
+ /*TXDE*/ 0x3 &UIC1 0x1 0x4
+ /*RXDE*/ 0x4 &UIC1 0x2 0x4>;
};
POB0: opb {
/* Bamboo is oddball in the 44x world and doesn't use the ERPN
* bits.
*/
- ranges = <00000000 0 00000000 80000000
- 80000000 0 80000000 80000000>;
+ ranges = <0x00000000 0x00000000 0x00000000 0x80000000
+ 0x80000000 0x00000000 0x80000000 0x80000000>;
interrupt-parent = <&UIC1>;
- interrupts = <7 4>;
+ interrupts = <0x7 0x4>;
clock-frequency = <0>; /* Filled in by zImage */
EBC0: ebc {
compatible = "ibm,ebc-440ep", "ibm,ebc-440gp", "ibm,ebc";
- dcr-reg = <012 2>;
+ dcr-reg = <0x012 0x002>;
#address-cells = <2>;
#size-cells = <1>;
clock-frequency = <0>; /* Filled in by zImage */
- interrupts = <5 1>;
+ interrupts = <0x5 0x1>;
interrupt-parent = <&UIC1>;
};
UART0: serial@ef600300 {
device_type = "serial";
compatible = "ns16550";
- reg = <ef600300 8>;
- virtual-reg = <ef600300>;
+ reg = <0xef600300 0x00000008>;
+ virtual-reg = <0xef600300>;
clock-frequency = <0>; /* Filled in by zImage */
- current-speed = <1c200>;
+ current-speed = <115200>;
interrupt-parent = <&UIC0>;
- interrupts = <0 4>;
+ interrupts = <0x0 0x4>;
};
UART1: serial@ef600400 {
device_type = "serial";
compatible = "ns16550";
- reg = <ef600400 8>;
- virtual-reg = <ef600400>;
+ reg = <0xef600400 0x00000008>;
+ virtual-reg = <0xef600400>;
clock-frequency = <0>;
current-speed = <0>;
interrupt-parent = <&UIC0>;
- interrupts = <1 4>;
+ interrupts = <0x1 0x4>;
};
UART2: serial@ef600500 {
device_type = "serial";
compatible = "ns16550";
- reg = <ef600500 8>;
- virtual-reg = <ef600500>;
+ reg = <0xef600500 0x00000008>;
+ virtual-reg = <0xef600500>;
clock-frequency = <0>;
current-speed = <0>;
interrupt-parent = <&UIC0>;
- interrupts = <3 4>;
+ interrupts = <0x3 0x4>;
};
UART3: serial@ef600600 {
device_type = "serial";
compatible = "ns16550";
- reg = <ef600600 8>;
- virtual-reg = <ef600600>;
+ reg = <0xef600600 0x00000008>;
+ virtual-reg = <0xef600600>;
clock-frequency = <0>;
current-speed = <0>;
interrupt-parent = <&UIC0>;
- interrupts = <4 4>;
+ interrupts = <0x4 0x4>;
};
IIC0: i2c@ef600700 {
compatible = "ibm,iic-440ep", "ibm,iic-440gp", "ibm,iic";
- reg = <ef600700 14>;
+ reg = <0xef600700 0x00000014>;
interrupt-parent = <&UIC0>;
- interrupts = <2 4>;
+ interrupts = <0x2 0x4>;
};
IIC1: i2c@ef600800 {
compatible = "ibm,iic-440ep", "ibm,iic-440gp", "ibm,iic";
- reg = <ef600800 14>;
+ reg = <0xef600800 0x00000014>;
interrupt-parent = <&UIC0>;
- interrupts = <7 4>;
+ interrupts = <0x7 0x4>;
};
ZMII0: emac-zmii@ef600d00 {
compatible = "ibm,zmii-440ep", "ibm,zmii-440gp", "ibm,zmii";
- reg = <ef600d00 c>;
+ reg = <0xef600d00 0x0000000c>;
};
EMAC0: ethernet@ef600e00 {
device_type = "network";
compatible = "ibm,emac-440ep", "ibm,emac-440gp", "ibm,emac";
interrupt-parent = <&UIC1>;
- interrupts = <1c 4 1d 4>;
- reg = <ef600e00 70>;
+ interrupts = <0x1c 0x4 0x1d 0x4>;
+ reg = <0xef600e00 0x00000070>;
local-mac-address = [000000000000];
mal-device = <&MAL0>;
mal-tx-channel = <0 1>;
mal-rx-channel = <0>;
cell-index = <0>;
- max-frame-size = <5dc>;
- rx-fifo-size = <1000>;
- tx-fifo-size = <800>;
+ max-frame-size = <1500>;
+ rx-fifo-size = <4096>;
+ tx-fifo-size = <2048>;
phy-mode = "rmii";
- phy-map = <00000000>;
+ phy-map = <0x00000000>;
zmii-device = <&ZMII0>;
zmii-channel = <0>;
};
device_type = "network";
compatible = "ibm,emac-440ep", "ibm,emac-440gp", "ibm,emac";
interrupt-parent = <&UIC1>;
- interrupts = <1e 4 1f 4>;
- reg = <ef600f00 70>;
+ interrupts = <0x1e 0x4 0x1f 0x4>;
+ reg = <0xef600f00 0x00000070>;
local-mac-address = [000000000000];
mal-device = <&MAL0>;
mal-tx-channel = <2 3>;
mal-rx-channel = <1>;
cell-index = <1>;
- max-frame-size = <5dc>;
- rx-fifo-size = <1000>;
- tx-fifo-size = <800>;
+ max-frame-size = <1500>;
+ rx-fifo-size = <4096>;
+ tx-fifo-size = <2048>;
phy-mode = "rmii";
- phy-map = <00000000>;
+ phy-map = <0x00000000>;
zmii-device = <&ZMII0>;
zmii-channel = <1>;
};
usb@ef601000 {
compatible = "ohci-be";
- reg = <ef601000 80>;
- interrupts = <8 1 9 1>;
+ reg = <0xef601000 0x00000080>;
+ interrupts = <0x8 0x1 0x9 0x1>;
interrupt-parent = < &UIC1 >;
};
};
#address-cells = <3>;
compatible = "ibm,plb440ep-pci", "ibm,plb-pci";
primary;
- reg = <0 eec00000 8 /* Config space access */
- 0 eed00000 4 /* IACK */
- 0 eed00000 4 /* Special cycle */
- 0 ef400000 40>; /* Internal registers */
+ reg = <0x00000000 0xeec00000 0x00000008 /* Config space access */
+ 0x00000000 0xeed00000 0x00000004 /* IACK */
+ 0x00000000 0xeed00000 0x00000004 /* Special cycle */
+ 0x00000000 0xef400000 0x00000040>; /* Internal registers */
/* Outbound ranges, one memory and one IO,
* later cannot be changed. Chip supports a second
* IO range but we don't use it for now
*/
- ranges = <02000000 0 a0000000 0 a0000000 0 20000000
- 01000000 0 00000000 0 e8000000 0 00010000>;
+ ranges = <0x02000000 0x00000000 0xa0000000 0x00000000 0xa0000000 0x00000000 0x20000000
+ 0x01000000 0x00000000 0x00000000 0x00000000 0xe8000000 0x00000000 0x00010000>;
/* Inbound 2GB range starting at 0 */
- dma-ranges = <42000000 0 0 0 0 0 80000000>;
+ dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
/* Bamboo has all 4 IRQ pins tied together per slot */
- interrupt-map-mask = <f800 0 0 0>;
+ interrupt-map-mask = <0xf800 0x0 0x0 0x0>;
interrupt-map = <
/* IDSEL 1 */
- 0800 0 0 0 &UIC0 1c 8
+ 0x800 0x0 0x0 0x0 &UIC0 0x1c 0x8
/* IDSEL 2 */
- 1000 0 0 0 &UIC0 1b 8
+ 0x1000 0x0 0x0 0x0 &UIC0 0x1b 0x8
/* IDSEL 3 */
- 1800 0 0 0 &UIC0 1a 8
+ 0x1800 0x0 0x0 0x0 &UIC0 0x1a 0x8
/* IDSEL 4 */
- 2000 0 0 0 &UIC0 19 8
+ 0x2000 0x0 0x0 0x0 &UIC0 0x19 0x8
>;
};
};
* any warranty of any kind, whether express or implied.
*/
+/dts-v1/;
+
/ {
#address-cells = <2>;
#size-cells = <1>;
model = "amcc,canyonlands";
compatible = "amcc,canyonlands";
- dcr-parent = <&/cpus/cpu@0>;
+ dcr-parent = <&{/cpus/cpu@0}>;
aliases {
ethernet0 = &EMAC0;
cpu@0 {
device_type = "cpu";
model = "PowerPC,460EX";
- reg = <0>;
+ reg = <0x00000000>;
clock-frequency = <0>; /* Filled in by U-Boot */
timebase-frequency = <0>; /* Filled in by U-Boot */
- i-cache-line-size = <20>;
- d-cache-line-size = <20>;
- i-cache-size = <8000>;
- d-cache-size = <8000>;
+ i-cache-line-size = <32>;
+ d-cache-line-size = <32>;
+ i-cache-size = <32768>;
+ d-cache-size = <32768>;
dcr-controller;
dcr-access-method = "native";
};
memory {
device_type = "memory";
- reg = <0 0 0>; /* Filled in by U-Boot */
+ reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by U-Boot */
};
UIC0: interrupt-controller0 {
compatible = "ibm,uic-460ex","ibm,uic";
interrupt-controller;
cell-index = <0>;
- dcr-reg = <0c0 009>;
+ dcr-reg = <0x0c0 0x009>;
#address-cells = <0>;
#size-cells = <0>;
#interrupt-cells = <2>;
compatible = "ibm,uic-460ex","ibm,uic";
interrupt-controller;
cell-index = <1>;
- dcr-reg = <0d0 009>;
+ dcr-reg = <0x0d0 0x009>;
#address-cells = <0>;
#size-cells = <0>;
#interrupt-cells = <2>;
- interrupts = <1e 4 1f 4>; /* cascade */
+ interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
interrupt-parent = <&UIC0>;
};
compatible = "ibm,uic-460ex","ibm,uic";
interrupt-controller;
cell-index = <2>;
- dcr-reg = <0e0 009>;
+ dcr-reg = <0x0e0 0x009>;
#address-cells = <0>;
#size-cells = <0>;
#interrupt-cells = <2>;
- interrupts = <a 4 b 4>; /* cascade */
+ interrupts = <0xa 0x4 0xb 0x4>; /* cascade */
interrupt-parent = <&UIC0>;
};
compatible = "ibm,uic-460ex","ibm,uic";
interrupt-controller;
cell-index = <3>;
- dcr-reg = <0f0 009>;
+ dcr-reg = <0x0f0 0x009>;
#address-cells = <0>;
#size-cells = <0>;
#interrupt-cells = <2>;
- interrupts = <10 4 11 4>; /* cascade */
+ interrupts = <0x10 0x4 0x11 0x4>; /* cascade */
interrupt-parent = <&UIC0>;
};
SDR0: sdr {
compatible = "ibm,sdr-460ex";
- dcr-reg = <00e 002>;
+ dcr-reg = <0x00e 0x002>;
};
CPR0: cpr {
compatible = "ibm,cpr-460ex";
- dcr-reg = <00c 002>;
+ dcr-reg = <0x00c 0x002>;
};
plb {
SDRAM0: sdram {
compatible = "ibm,sdram-460ex", "ibm,sdram-405gp";
- dcr-reg = <010 2>;
+ dcr-reg = <0x010 0x002>;
};
MAL0: mcmal {
compatible = "ibm,mcmal-460ex", "ibm,mcmal2";
- dcr-reg = <180 62>;
+ dcr-reg = <0x180 0x062>;
num-tx-chans = <2>;
- num-rx-chans = <10>;
+ num-rx-chans = <16>;
#address-cells = <0>;
#size-cells = <0>;
interrupt-parent = <&UIC2>;
- interrupts = < /*TXEOB*/ 6 4
- /*RXEOB*/ 7 4
- /*SERR*/ 3 4
- /*TXDE*/ 4 4
- /*RXDE*/ 5 4>;
+ interrupts = < /*TXEOB*/ 0x6 0x4
+ /*RXEOB*/ 0x7 0x4
+ /*SERR*/ 0x3 0x4
+ /*TXDE*/ 0x4 0x4
+ /*RXDE*/ 0x5 0x4>;
};
POB0: opb {
compatible = "ibm,opb-460ex", "ibm,opb";
#address-cells = <1>;
#size-cells = <1>;
- ranges = <b0000000 4 b0000000 50000000>;
+ ranges = <0xb0000000 0x00000004 0xb0000000 0x50000000>;
clock-frequency = <0>; /* Filled in by U-Boot */
EBC0: ebc {
compatible = "ibm,ebc-460ex", "ibm,ebc";
- dcr-reg = <012 2>;
+ dcr-reg = <0x012 0x002>;
#address-cells = <2>;
#size-cells = <1>;
clock-frequency = <0>; /* Filled in by U-Boot */
/* ranges property is supplied by U-Boot */
- interrupts = <6 4>;
+ interrupts = <0x6 0x4>;
interrupt-parent = <&UIC1>;
nor_flash@0,0 {
compatible = "amd,s29gl512n", "cfi-flash";
bank-width = <2>;
- reg = <0 000000 4000000>;
+ reg = <0x00000000 0x00000000 0x04000000>;
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "kernel";
- reg = <0 1e0000>;
+ reg = <0x00000000 0x001e0000>;
};
partition@1e0000 {
label = "dtb";
- reg = <1e0000 20000>;
+ reg = <0x001e0000 0x00020000>;
};
partition@200000 {
label = "ramdisk";
- reg = <200000 1400000>;
+ reg = <0x00200000 0x01400000>;
};
partition@1600000 {
label = "jffs2";
- reg = <1600000 400000>;
+ reg = <0x01600000 0x00400000>;
};
partition@1a00000 {
label = "user";
- reg = <1a00000 2560000>;
+ reg = <0x01a00000 0x02560000>;
};
partition@3f60000 {
label = "env";
- reg = <3f60000 40000>;
+ reg = <0x03f60000 0x00040000>;
};
partition@3fa0000 {
label = "u-boot";
- reg = <3fa0000 60000>;
+ reg = <0x03fa0000 0x00060000>;
};
};
};
UART0: serial@ef600300 {
device_type = "serial";
compatible = "ns16550";
- reg = <ef600300 8>;
- virtual-reg = <ef600300>;
+ reg = <0xef600300 0x00000008>;
+ virtual-reg = <0xef600300>;
clock-frequency = <0>; /* Filled in by U-Boot */
current-speed = <0>; /* Filled in by U-Boot */
interrupt-parent = <&UIC1>;
- interrupts = <1 4>;
+ interrupts = <0x1 0x4>;
};
UART1: serial@ef600400 {
device_type = "serial";
compatible = "ns16550";
- reg = <ef600400 8>;
- virtual-reg = <ef600400>;
+ reg = <0xef600400 0x00000008>;
+ virtual-reg = <0xef600400>;
clock-frequency = <0>; /* Filled in by U-Boot */
current-speed = <0>; /* Filled in by U-Boot */
interrupt-parent = <&UIC0>;
- interrupts = <1 4>;
+ interrupts = <0x1 0x4>;
};
UART2: serial@ef600500 {
device_type = "serial";
compatible = "ns16550";
- reg = <ef600500 8>;
- virtual-reg = <ef600500>;
+ reg = <0xef600500 0x00000008>;
+ virtual-reg = <0xef600500>;
clock-frequency = <0>; /* Filled in by U-Boot */
current-speed = <0>; /* Filled in by U-Boot */
interrupt-parent = <&UIC1>;
- interrupts = <1d 4>;
+ interrupts = <0x1d 0x4>;
};
UART3: serial@ef600600 {
device_type = "serial";
compatible = "ns16550";
- reg = <ef600600 8>;
- virtual-reg = <ef600600>;
+ reg = <0xef600600 0x00000008>;
+ virtual-reg = <0xef600600>;
clock-frequency = <0>; /* Filled in by U-Boot */
current-speed = <0>; /* Filled in by U-Boot */
interrupt-parent = <&UIC1>;
- interrupts = <1e 4>;
+ interrupts = <0x1e 0x4>;
};
IIC0: i2c@ef600700 {
compatible = "ibm,iic-460ex", "ibm,iic";
- reg = <ef600700 14>;
+ reg = <0xef600700 0x00000014>;
interrupt-parent = <&UIC0>;
- interrupts = <2 4>;
+ interrupts = <0x2 0x4>;
};
IIC1: i2c@ef600800 {
compatible = "ibm,iic-460ex", "ibm,iic";
- reg = <ef600800 14>;
+ reg = <0xef600800 0x00000014>;
interrupt-parent = <&UIC0>;
- interrupts = <3 4>;
+ interrupts = <0x3 0x4>;
};
ZMII0: emac-zmii@ef600d00 {
compatible = "ibm,zmii-460ex", "ibm,zmii";
- reg = <ef600d00 c>;
+ reg = <0xef600d00 0x0000000c>;
};
RGMII0: emac-rgmii@ef601500 {
compatible = "ibm,rgmii-460ex", "ibm,rgmii";
- reg = <ef601500 8>;
+ reg = <0xef601500 0x00000008>;
has-mdio;
};
TAH0: emac-tah@ef601350 {
compatible = "ibm,tah-460ex", "ibm,tah";
- reg = <ef601350 30>;
+ reg = <0xef601350 0x00000030>;
};
TAH1: emac-tah@ef601450 {
compatible = "ibm,tah-460ex", "ibm,tah";
- reg = <ef601450 30>;
+ reg = <0xef601450 0x00000030>;
};
EMAC0: ethernet@ef600e00 {
device_type = "network";
compatible = "ibm,emac-460ex", "ibm,emac4";
interrupt-parent = <&EMAC0>;
- interrupts = <0 1>;
+ interrupts = <0x0 0x1>;
#interrupt-cells = <1>;
#address-cells = <0>;
#size-cells = <0>;
- interrupt-map = </*Status*/ 0 &UIC2 10 4
- /*Wake*/ 1 &UIC2 14 4>;
- reg = <ef600e00 70>;
+ interrupt-map = </*Status*/ 0x0 &UIC2 0x10 0x4
+ /*Wake*/ 0x1 &UIC2 0x14 0x4>;
+ reg = <0xef600e00 0x00000070>;
local-mac-address = [000000000000]; /* Filled in by U-Boot */
mal-device = <&MAL0>;
mal-tx-channel = <0>;
mal-rx-channel = <0>;
cell-index = <0>;
- max-frame-size = <2328>;
- rx-fifo-size = <1000>;
- tx-fifo-size = <800>;
+ max-frame-size = <9000>;
+ rx-fifo-size = <4096>;
+ tx-fifo-size = <2048>;
phy-mode = "rgmii";
- phy-map = <00000000>;
+ phy-map = <0x00000000>;
rgmii-device = <&RGMII0>;
rgmii-channel = <0>;
tah-device = <&TAH0>;
device_type = "network";
compatible = "ibm,emac-460ex", "ibm,emac4";
interrupt-parent = <&EMAC1>;
- interrupts = <0 1>;
+ interrupts = <0x0 0x1>;
#interrupt-cells = <1>;
#address-cells = <0>;
#size-cells = <0>;
- interrupt-map = </*Status*/ 0 &UIC2 11 4
- /*Wake*/ 1 &UIC2 15 4>;
- reg = <ef600f00 70>;
+ interrupt-map = </*Status*/ 0x0 &UIC2 0x11 0x4
+ /*Wake*/ 0x1 &UIC2 0x15 0x4>;
+ reg = <0xef600f00 0x00000070>;
local-mac-address = [000000000000]; /* Filled in by U-Boot */
mal-device = <&MAL0>;
mal-tx-channel = <1>;
mal-rx-channel = <8>;
cell-index = <1>;
- max-frame-size = <2328>;
- rx-fifo-size = <1000>;
- tx-fifo-size = <800>;
+ max-frame-size = <9000>;
+ rx-fifo-size = <4096>;
+ tx-fifo-size = <2048>;
phy-mode = "rgmii";
- phy-map = <00000000>;
+ phy-map = <0x00000000>;
rgmii-device = <&RGMII0>;
rgmii-channel = <1>;
tah-device = <&TAH1>;
primary;
large-inbound-windows;
enable-msi-hole;
- reg = <c 0ec00000 8 /* Config space access */
- 0 0 0 /* no IACK cycles */
- c 0ed00000 4 /* Special cycles */
- c 0ec80000 100 /* Internal registers */
- c 0ec80100 fc>; /* Internal messaging registers */
+ reg = <0x0000000c 0x0ec00000 0x00000008 /* Config space access */
+ 0x00000000 0x00000000 0x00000000 /* no IACK cycles */
+ 0x0000000c 0x0ed00000 0x00000004 /* Special cycles */
+ 0x0000000c 0x0ec80000 0x00000100 /* Internal registers */
+ 0x0000000c 0x0ec80100 0x000000fc>; /* Internal messaging registers */
/* Outbound ranges, one memory and one IO,
* later cannot be changed
*/
- ranges = <02000000 0 80000000 0000000d 80000000 0 80000000
- 01000000 0 00000000 0000000c 08000000 0 00010000>;
+ ranges = <0x02000000 0x00000000 0x80000000 0x0000000d 0x80000000 0x00000000 0x80000000
+ 0x01000000 0x00000000 0x00000000 0x0000000c 0x08000000 0x00000000 0x00010000>;
/* Inbound 2GB range starting at 0 */
- dma-ranges = <42000000 0 0 0 0 0 80000000>;
+ dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
/* This drives busses 0 to 0x3f */
- bus-range = <0 3f>;
+ bus-range = <0x0 0x3f>;
/* All PCI interrupts are routed to ext IRQ 2 -> UIC1-0 */
- interrupt-map-mask = <0000 0 0 0>;
- interrupt-map = < 0000 0 0 0 &UIC1 0 8 >;
+ interrupt-map-mask = <0x0 0x0 0x0 0x0>;
+ interrupt-map = < 0x0 0x0 0x0 0x0 &UIC1 0x0 0x8 >;
};
PCIE0: pciex@d00000000 {
#address-cells = <3>;
compatible = "ibm,plb-pciex-460ex", "ibm,plb-pciex";
primary;
- port = <0>; /* port number */
- reg = <d 00000000 20000000 /* Config space access */
- c 08010000 00001000>; /* Registers */
- dcr-reg = <100 020>;
- sdr-base = <300>;
+ port = <0x0>; /* port number */
+ reg = <0x0000000d 0x00000000 0x20000000 /* Config space access */
+ 0x0000000c 0x08010000 0x00001000>; /* Registers */
+ dcr-reg = <0x100 0x020>;
+ sdr-base = <0x300>;
/* Outbound ranges, one memory and one IO,
* later cannot be changed
*/
- ranges = <02000000 0 80000000 0000000e 00000000 0 80000000
- 01000000 0 00000000 0000000f 80000000 0 00010000>;
+ ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x00000000 0x00000000 0x80000000
+ 0x01000000 0x00000000 0x00000000 0x0000000f 0x80000000 0x00000000 0x00010000>;
/* Inbound 2GB range starting at 0 */
- dma-ranges = <42000000 0 0 0 0 0 80000000>;
+ dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
/* This drives busses 40 to 0x7f */
- bus-range = <40 7f>;
+ bus-range = <0x40 0x7f>;
/* Legacy interrupts (note the weird polarity, the bridge seems
* to invert PCIe legacy interrupts).
* below are basically de-swizzled numbers.
* The real slot is on idsel 0, so the swizzling is 1:1
*/
- interrupt-map-mask = <0000 0 0 7>;
+ interrupt-map-mask = <0x0 0x0 0x0 0x7>;
interrupt-map = <
- 0000 0 0 1 &UIC3 c 4 /* swizzled int A */
- 0000 0 0 2 &UIC3 d 4 /* swizzled int B */
- 0000 0 0 3 &UIC3 e 4 /* swizzled int C */
- 0000 0 0 4 &UIC3 f 4 /* swizzled int D */>;
+ 0x0 0x0 0x0 0x1 &UIC3 0xc 0x4 /* swizzled int A */
+ 0x0 0x0 0x0 0x2 &UIC3 0xd 0x4 /* swizzled int B */
+ 0x0 0x0 0x0 0x3 &UIC3 0xe 0x4 /* swizzled int C */
+ 0x0 0x0 0x0 0x4 &UIC3 0xf 0x4 /* swizzled int D */>;
};
PCIE1: pciex@d20000000 {
#address-cells = <3>;
compatible = "ibm,plb-pciex-460ex", "ibm,plb-pciex";
primary;
- port = <1>; /* port number */
- reg = <d 20000000 20000000 /* Config space access */
- c 08011000 00001000>; /* Registers */
- dcr-reg = <120 020>;
- sdr-base = <340>;
+ port = <0x1>; /* port number */
+ reg = <0x0000000d 0x20000000 0x20000000 /* Config space access */
+ 0x0000000c 0x08011000 0x00001000>; /* Registers */
+ dcr-reg = <0x120 0x020>;
+ sdr-base = <0x340>;
/* Outbound ranges, one memory and one IO,
* later cannot be changed
*/
- ranges = <02000000 0 80000000 0000000e 80000000 0 80000000
- 01000000 0 00000000 0000000f 80010000 0 00010000>;
+ ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x80000000 0x00000000 0x80000000
+ 0x01000000 0x00000000 0x00000000 0x0000000f 0x80010000 0x00000000 0x00010000>;
/* Inbound 2GB range starting at 0 */
- dma-ranges = <42000000 0 0 0 0 0 80000000>;
+ dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
/* This drives busses 80 to 0xbf */
- bus-range = <80 bf>;
+ bus-range = <0x80 0xbf>;
/* Legacy interrupts (note the weird polarity, the bridge seems
* to invert PCIe legacy interrupts).
* below are basically de-swizzled numbers.
* The real slot is on idsel 0, so the swizzling is 1:1
*/
- interrupt-map-mask = <0000 0 0 7>;
+ interrupt-map-mask = <0x0 0x0 0x0 0x7>;
interrupt-map = <
- 0000 0 0 1 &UIC3 10 4 /* swizzled int A */
- 0000 0 0 2 &UIC3 11 4 /* swizzled int B */
- 0000 0 0 3 &UIC3 12 4 /* swizzled int C */
- 0000 0 0 4 &UIC3 13 4 /* swizzled int D */>;
+ 0x0 0x0 0x0 0x1 &UIC3 0x10 0x4 /* swizzled int A */
+ 0x0 0x0 0x0 0x2 &UIC3 0x11 0x4 /* swizzled int B */
+ 0x0 0x0 0x0 0x3 &UIC3 0x12 0x4 /* swizzled int C */
+ 0x0 0x0 0x0 0x4 &UIC3 0x13 0x4 /* swizzled int D */>;
};
};
};
* any warranty of any kind, whether express or implied.
*/
+/dts-v1/;
+
/ {
#address-cells = <2>;
#size-cells = <1>;
model = "ibm,ebony";
compatible = "ibm,ebony";
- dcr-parent = <&/cpus/cpu@0>;
+ dcr-parent = <&{/cpus/cpu@0}>;
aliases {
ethernet0 = &EMAC0;
cpu@0 {
device_type = "cpu";
model = "PowerPC,440GP";
- reg = <0>;
+ reg = <0x00000000>;
clock-frequency = <0>; // Filled in by zImage
timebase-frequency = <0>; // Filled in by zImage
- i-cache-line-size = <20>;
- d-cache-line-size = <20>;
- i-cache-size = <8000>; /* 32 kB */
- d-cache-size = <8000>; /* 32 kB */
+ i-cache-line-size = <32>;
+ d-cache-line-size = <32>;
+ i-cache-size = <32768>; /* 32 kB */
+ d-cache-size = <32768>; /* 32 kB */
dcr-controller;
dcr-access-method = "native";
};
memory {
device_type = "memory";
- reg = <0 0 0>; // Filled in by zImage
+ reg = <0x00000000 0x00000000 0x00000000>; // Filled in by zImage
};
UIC0: interrupt-controller0 {
compatible = "ibm,uic-440gp", "ibm,uic";
interrupt-controller;
cell-index = <0>;
- dcr-reg = <0c0 009>;
+ dcr-reg = <0x0c0 0x009>;
#address-cells = <0>;
#size-cells = <0>;
#interrupt-cells = <2>;
compatible = "ibm,uic-440gp", "ibm,uic";
interrupt-controller;
cell-index = <1>;
- dcr-reg = <0d0 009>;
+ dcr-reg = <0x0d0 0x009>;
#address-cells = <0>;
#size-cells = <0>;
#interrupt-cells = <2>;
- interrupts = <1e 4 1f 4>; /* cascade */
+ interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
interrupt-parent = <&UIC0>;
};
CPC0: cpc {
compatible = "ibm,cpc-440gp";
- dcr-reg = <0b0 003 0e0 010>;
+ dcr-reg = <0x0b0 0x003 0x0e0 0x010>;
// FIXME: anything else?
};
SDRAM0: memory-controller {
compatible = "ibm,sdram-440gp";
- dcr-reg = <010 2>;
+ dcr-reg = <0x010 0x002>;
// FIXME: anything else?
};
SRAM0: sram {
compatible = "ibm,sram-440gp";
- dcr-reg = <020 8 00a 1>;
+ dcr-reg = <0x020 0x008 0x00a 0x001>;
};
DMA0: dma {
// FIXME: ???
compatible = "ibm,dma-440gp";
- dcr-reg = <100 027>;
+ dcr-reg = <0x100 0x027>;
};
MAL0: mcmal {
compatible = "ibm,mcmal-440gp", "ibm,mcmal";
- dcr-reg = <180 62>;
+ dcr-reg = <0x180 0x062>;
num-tx-chans = <4>;
num-rx-chans = <4>;
interrupt-parent = <&MAL0>;
- interrupts = <0 1 2 3 4>;
+ interrupts = <0x0 0x1 0x2 0x3 0x4>;
#interrupt-cells = <1>;
#address-cells = <0>;
#size-cells = <0>;
- interrupt-map = </*TXEOB*/ 0 &UIC0 a 4
- /*RXEOB*/ 1 &UIC0 b 4
- /*SERR*/ 2 &UIC1 0 4
- /*TXDE*/ 3 &UIC1 1 4
- /*RXDE*/ 4 &UIC1 2 4>;
- interrupt-map-mask = <ffffffff>;
+ interrupt-map = </*TXEOB*/ 0x0 &UIC0 0xa 0x4
+ /*RXEOB*/ 0x1 &UIC0 0xb 0x4
+ /*SERR*/ 0x2 &UIC1 0x0 0x4
+ /*TXDE*/ 0x3 &UIC1 0x1 0x4
+ /*RXDE*/ 0x4 &UIC1 0x2 0x4>;
+ interrupt-map-mask = <0xffffffff>;
};
POB0: opb {
#size-cells = <1>;
/* Wish there was a nicer way of specifying a full 32-bit
range */
- ranges = <00000000 1 00000000 80000000
- 80000000 1 80000000 80000000>;
- dcr-reg = <090 00b>;
+ ranges = <0x00000000 0x00000001 0x00000000 0x80000000
+ 0x80000000 0x00000001 0x80000000 0x80000000>;
+ dcr-reg = <0x090 0x00b>;
interrupt-parent = <&UIC1>;
- interrupts = <7 4>;
+ interrupts = <0x7 0x4>;
clock-frequency = <0>; // Filled in by zImage
EBC0: ebc {
compatible = "ibm,ebc-440gp", "ibm,ebc";
- dcr-reg = <012 2>;
+ dcr-reg = <0x012 0x002>;
#address-cells = <2>;
#size-cells = <1>;
clock-frequency = <0>; // Filled in by zImage
// ranges property is supplied by zImage
// based on firmware's configuration of the
// EBC bridge
- interrupts = <5 4>;
+ interrupts = <0x5 0x4>;
interrupt-parent = <&UIC1>;
small-flash@0,80000 {
compatible = "jedec-flash";
bank-width = <1>;
- reg = <0 80000 80000>;
+ reg = <0x00000000 0x00080000 0x00080000>;
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "OpenBIOS";
- reg = <0 80000>;
+ reg = <0x00000000 0x00080000>;
read-only;
};
};
nvram@1,0 {
/* NVRAM & RTC */
compatible = "ds1743-nvram";
- #bytes = <2000>;
- reg = <1 0 2000>;
+ #bytes = <0x2000>;
+ reg = <0x00000001 0x00000000 0x00002000>;
};
large-flash@2,0 {
compatible = "jedec-flash";
bank-width = <1>;
- reg = <2 0 400000>;
+ reg = <0x00000002 0x00000000 0x00400000>;
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "fs";
- reg = <0 380000>;
+ reg = <0x00000000 0x00380000>;
};
partition@380000 {
label = "firmware";
- reg = <380000 80000>;
+ reg = <0x00380000 0x00080000>;
};
};
ir@3,0 {
- reg = <3 0 10>;
+ reg = <0x00000003 0x00000000 0x00000010>;
};
fpga@7,0 {
compatible = "Ebony-FPGA";
- reg = <7 0 10>;
- virtual-reg = <e8300000>;
+ reg = <0x00000007 0x00000000 0x00000010>;
+ virtual-reg = <0xe8300000>;
};
};
UART0: serial@40000200 {
device_type = "serial";
compatible = "ns16550";
- reg = <40000200 8>;
- virtual-reg = <e0000200>;
- clock-frequency = <A8C000>;
- current-speed = <2580>;
+ reg = <0x40000200 0x00000008>;
+ virtual-reg = <0xe0000200>;
+ clock-frequency = <11059200>;
+ current-speed = <9600>;
interrupt-parent = <&UIC0>;
- interrupts = <0 4>;
+ interrupts = <0x0 0x4>;
};
UART1: serial@40000300 {
device_type = "serial";
compatible = "ns16550";
- reg = <40000300 8>;
- virtual-reg = <e0000300>;
- clock-frequency = <A8C000>;
- current-speed = <2580>;
+ reg = <0x40000300 0x00000008>;
+ virtual-reg = <0xe0000300>;
+ clock-frequency = <11059200>;
+ current-speed = <9600>;
interrupt-parent = <&UIC0>;
- interrupts = <1 4>;
+ interrupts = <0x1 0x4>;
};
IIC0: i2c@40000400 {
/* FIXME */
compatible = "ibm,iic-440gp", "ibm,iic";
- reg = <40000400 14>;
+ reg = <0x40000400 0x00000014>;
interrupt-parent = <&UIC0>;
- interrupts = <2 4>;
+ interrupts = <0x2 0x4>;
};
IIC1: i2c@40000500 {
/* FIXME */
compatible = "ibm,iic-440gp", "ibm,iic";
- reg = <40000500 14>;
+ reg = <0x40000500 0x00000014>;
interrupt-parent = <&UIC0>;
- interrupts = <3 4>;
+ interrupts = <0x3 0x4>;
};
GPIO0: gpio@40000700 {
/* FIXME */
compatible = "ibm,gpio-440gp";
- reg = <40000700 20>;
+ reg = <0x40000700 0x00000020>;
};
ZMII0: emac-zmii@40000780 {
compatible = "ibm,zmii-440gp", "ibm,zmii";
- reg = <40000780 c>;
+ reg = <0x40000780 0x0000000c>;
};
EMAC0: ethernet@40000800 {
device_type = "network";
compatible = "ibm,emac-440gp", "ibm,emac";
interrupt-parent = <&UIC1>;
- interrupts = <1c 4 1d 4>;
- reg = <40000800 70>;
+ interrupts = <0x1c 0x4 0x1d 0x4>;
+ reg = <0x40000800 0x00000070>;
local-mac-address = [000000000000]; // Filled in by zImage
mal-device = <&MAL0>;
mal-tx-channel = <0 1>;
mal-rx-channel = <0>;
cell-index = <0>;
- max-frame-size = <5dc>;
- rx-fifo-size = <1000>;
- tx-fifo-size = <800>;
+ max-frame-size = <1500>;
+ rx-fifo-size = <4096>;
+ tx-fifo-size = <2048>;
phy-mode = "rmii";
- phy-map = <00000001>;
+ phy-map = <0x00000001>;
zmii-device = <&ZMII0>;
zmii-channel = <0>;
};
device_type = "network";
compatible = "ibm,emac-440gp", "ibm,emac";
interrupt-parent = <&UIC1>;
- interrupts = <1e 4 1f 4>;
- reg = <40000900 70>;
+ interrupts = <0x1e 0x4 0x1f 0x4>;
+ reg = <0x40000900 0x00000070>;
local-mac-address = [000000000000]; // Filled in by zImage
mal-device = <&MAL0>;
mal-tx-channel = <2 3>;
mal-rx-channel = <1>;
cell-index = <1>;
- max-frame-size = <5dc>;
- rx-fifo-size = <1000>;
- tx-fifo-size = <800>;
+ max-frame-size = <1500>;
+ rx-fifo-size = <4096>;
+ tx-fifo-size = <2048>;
phy-mode = "rmii";
- phy-map = <00000001>;
+ phy-map = <0x00000001>;
zmii-device = <&ZMII0>;
zmii-channel = <1>;
};
GPT0: gpt@40000a00 {
/* FIXME */
- reg = <40000a00 d4>;
+ reg = <0x40000a00 0x000000d4>;
interrupt-parent = <&UIC0>;
- interrupts = <12 4 13 4 14 4 15 4 16 4>;
+ interrupts = <0x12 0x4 0x13 0x4 0x14 0x4 0x15 0x4 0x16 0x4>;
};
};
#address-cells = <3>;
compatible = "ibm,plb440gp-pcix", "ibm,plb-pcix";
primary;
- reg = <2 0ec00000 8 /* Config space access */
- 0 0 0 /* no IACK cycles */
- 2 0ed00000 4 /* Special cycles */
- 2 0ec80000 f0 /* Internal registers */
- 2 0ec80100 fc>; /* Internal messaging registers */
+ reg = <0x00000002 0x0ec00000 0x00000008 /* Config space access */
+ 0x00000000 0x00000000 0x00000000 /* no IACK cycles */
+ 0x00000002 0x0ed00000 0x00000004 /* Special cycles */
+ 0x00000002 0x0ec80000 0x000000f0 /* Internal registers */
+ 0x00000002 0x0ec80100 0x000000fc>; /* Internal messaging registers */
/* Outbound ranges, one memory and one IO,
* later cannot be changed
*/
- ranges = <02000000 0 80000000 00000003 80000000 0 80000000
- 01000000 0 00000000 00000002 08000000 0 00010000>;
+ ranges = <0x02000000 0x00000000 0x80000000 0x00000003 0x80000000 0x00000000 0x80000000
+ 0x01000000 0x00000000 0x00000000 0x00000002 0x08000000 0x00000000 0x00010000>;
/* Inbound 2GB range starting at 0 */
- dma-ranges = <42000000 0 0 0 0 0 80000000>;
+ dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
/* Ebony has all 4 IRQ pins tied together per slot */
- interrupt-map-mask = <f800 0 0 0>;
+ interrupt-map-mask = <0xf800 0x0 0x0 0x0>;
interrupt-map = <
/* IDSEL 1 */
- 0800 0 0 0 &UIC0 17 8
+ 0x800 0x0 0x0 0x0 &UIC0 0x17 0x8
/* IDSEL 2 */
- 1000 0 0 0 &UIC0 18 8
+ 0x1000 0x0 0x0 0x0 &UIC0 0x18 0x8
/* IDSEL 3 */
- 1800 0 0 0 &UIC0 19 8
+ 0x1800 0x0 0x0 0x0 &UIC0 0x19 0x8
/* IDSEL 4 */
- 2000 0 0 0 &UIC0 1a 8
+ 0x2000 0x0 0x0 0x0 &UIC0 0x1a 0x8
>;
};
};
* any warranty of any kind, whether express or implied.
*/
+/dts-v1/;
+
/ {
#address-cells = <1>;
#size-cells = <1>;
model = "ep405";
compatible = "ep405";
- dcr-parent = <&/cpus/cpu@0>;
+ dcr-parent = <&{/cpus/cpu@0}>;
aliases {
ethernet0 = &EMAC;
cpu@0 {
device_type = "cpu";
model = "PowerPC,405GP";
- reg = <0>;
- clock-frequency = <bebc200>; /* Filled in by zImage */
+ reg = <0x00000000>;
+ clock-frequency = <200000000>; /* Filled in by zImage */
timebase-frequency = <0>; /* Filled in by zImage */
- i-cache-line-size = <20>;
- d-cache-line-size = <20>;
- i-cache-size = <4000>;
- d-cache-size = <4000>;
+ i-cache-line-size = <32>;
+ d-cache-line-size = <32>;
+ i-cache-size = <16384>;
+ d-cache-size = <16384>;
dcr-controller;
dcr-access-method = "native";
};
memory {
device_type = "memory";
- reg = <0 0>; /* Filled in by zImage */
+ reg = <0x00000000 0x00000000>; /* Filled in by zImage */
};
UIC0: interrupt-controller {
compatible = "ibm,uic";
interrupt-controller;
cell-index = <0>;
- dcr-reg = <0c0 9>;
+ dcr-reg = <0x0c0 0x009>;
#address-cells = <0>;
#size-cells = <0>;
#interrupt-cells = <2>;
SDRAM0: memory-controller {
compatible = "ibm,sdram-405gp";
- dcr-reg = <010 2>;
+ dcr-reg = <0x010 0x002>;
};
MAL: mcmal {
compatible = "ibm,mcmal-405gp", "ibm,mcmal";
- dcr-reg = <180 62>;
+ dcr-reg = <0x180 0x062>;
num-tx-chans = <1>;
num-rx-chans = <1>;
interrupt-parent = <&UIC0>;
interrupts = <
- b 4 /* TXEOB */
- c 4 /* RXEOB */
- a 4 /* SERR */
- d 4 /* TXDE */
- e 4 /* RXDE */>;
+ 0xb 0x4 /* TXEOB */
+ 0xc 0x4 /* RXEOB */
+ 0xa 0x4 /* SERR */
+ 0xd 0x4 /* TXDE */
+ 0xe 0x4 /* RXDE */>;
};
POB0: opb {
compatible = "ibm,opb-405gp", "ibm,opb";
#address-cells = <1>;
#size-cells = <1>;
- ranges = <ef600000 ef600000 a00000>;
- dcr-reg = <0a0 5>;
+ ranges = <0xef600000 0xef600000 0x00a00000>;
+ dcr-reg = <0x0a0 0x005>;
clock-frequency = <0>; /* Filled in by zImage */
UART0: serial@ef600300 {
device_type = "serial";
compatible = "ns16550";
- reg = <ef600300 8>;
- virtual-reg = <ef600300>;
+ reg = <0xef600300 0x00000008>;
+ virtual-reg = <0xef600300>;
clock-frequency = <0>; /* Filled in by zImage */
- current-speed = <2580>;
+ current-speed = <9600>;
interrupt-parent = <&UIC0>;
- interrupts = <0 4>;
+ interrupts = <0x0 0x4>;
};
UART1: serial@ef600400 {
device_type = "serial";
compatible = "ns16550";
- reg = <ef600400 8>;
- virtual-reg = <ef600400>;
+ reg = <0xef600400 0x00000008>;
+ virtual-reg = <0xef600400>;
clock-frequency = <0>; /* Filled in by zImage */
- current-speed = <2580>;
+ current-speed = <9600>;
interrupt-parent = <&UIC0>;
- interrupts = <1 4>;
+ interrupts = <0x1 0x4>;
};
IIC: i2c@ef600500 {
compatible = "ibm,iic-405gp", "ibm,iic";
- reg = <ef600500 11>;
+ reg = <0xef600500 0x00000011>;
interrupt-parent = <&UIC0>;
- interrupts = <2 4>;
+ interrupts = <0x2 0x4>;
};
GPIO: gpio@ef600700 {
compatible = "ibm,gpio-405gp";
- reg = <ef600700 20>;
+ reg = <0xef600700 0x00000020>;
};
EMAC: ethernet@ef600800 {
- linux,network-index = <0>;
+ linux,network-index = <0x0>;
device_type = "network";
compatible = "ibm,emac-405gp", "ibm,emac";
interrupt-parent = <&UIC0>;
interrupts = <
- f 4 /* Ethernet */
- 9 4 /* Ethernet Wake Up */>;
+ 0xf 0x4 /* Ethernet */
+ 0x9 0x4 /* Ethernet Wake Up */>;
local-mac-address = [000000000000]; /* Filled in by zImage */
- reg = <ef600800 70>;
+ reg = <0xef600800 0x00000070>;
mal-device = <&MAL>;
mal-tx-channel = <0>;
mal-rx-channel = <0>;
cell-index = <0>;
- max-frame-size = <5dc>;
- rx-fifo-size = <1000>;
- tx-fifo-size = <800>;
+ max-frame-size = <1500>;
+ rx-fifo-size = <4096>;
+ tx-fifo-size = <2048>;
phy-mode = "rmii";
- phy-map = <00000000>;
+ phy-map = <0x00000000>;
};
};
EBC0: ebc {
compatible = "ibm,ebc-405gp", "ibm,ebc";
- dcr-reg = <012 2>;
+ dcr-reg = <0x012 0x002>;
#address-cells = <2>;
#size-cells = <1>;
/* NVRAM and RTC */
nvrtc@4,200000 {
compatible = "ds1742";
- reg = <4 200000 0>; /* size fixed up by zImage */
+ reg = <0x00000004 0x00200000 0x00000000>; /* size fixed up by zImage */
};
/* "BCSR" CPLD contains a PCI irq controller */
bcsr@4,0 {
compatible = "ep405-bcsr";
- reg = <4 0 10>;
+ reg = <0x00000004 0x00000000 0x00000010>;
interrupt-controller;
/* Routing table */
irq-routing = [ 00 /* SYSERR */
#address-cells = <3>;
compatible = "ibm,plb405gp-pci", "ibm,plb-pci";
primary;
- reg = <eec00000 8 /* Config space access */
- eed80000 4 /* IACK */
- eed80000 4 /* Special cycle */
- ef480000 40>; /* Internal registers */
+ reg = <0xeec00000 0x00000008 /* Config space access */
+ 0xeed80000 0x00000004 /* IACK */
+ 0xeed80000 0x00000004 /* Special cycle */
+ 0xef480000 0x00000040>; /* Internal registers */
/* Outbound ranges, one memory and one IO,
* later cannot be changed. Chip supports a second
* IO range but we don't use it for now
*/
- ranges = <02000000 0 80000000 80000000 0 20000000
- 01000000 0 00000000 e8000000 0 00010000>;
+ ranges = <0x02000000 0x00000000 0x80000000 0x80000000 0x00000000 0x20000000
+ 0x01000000 0x00000000 0x00000000 0xe8000000 0x00000000 0x00010000>;
/* Inbound 2GB range starting at 0 */
- dma-ranges = <42000000 0 0 0 0 80000000>;
+ dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x80000000>;
/* That's all I know about IRQs on that thing ... */
- interrupt-map-mask = <f800 0 0 0>;
+ interrupt-map-mask = <0xf800 0x0 0x0 0x0>;
interrupt-map = <
/* USB */
- 7000 0 0 0 &UIC0 1e 8 /* IRQ5 */
+ 0x7000 0x0 0x0 0x0 &UIC0 0x1e 0x8 /* IRQ5 */
>;
};
};
* any warranty of any kind, whether express or implied.
*/
+/dts-v1/;
+
/ {
#address-cells = <2>;
#size-cells = <1>;
model = "amcc,glacier";
compatible = "amcc,glacier", "amcc,canyonlands";
- dcr-parent = <&/cpus/cpu@0>;
+ dcr-parent = <&{/cpus/cpu@0}>;
aliases {
ethernet0 = &EMAC0;
cpu@0 {
device_type = "cpu";
model = "PowerPC,460GT";
- reg = <0>;
+ reg = <0x00000000>;
clock-frequency = <0>; /* Filled in by U-Boot */
timebase-frequency = <0>; /* Filled in by U-Boot */
- i-cache-line-size = <20>;
- d-cache-line-size = <20>;
- i-cache-size = <8000>;
- d-cache-size = <8000>;
+ i-cache-line-size = <32>;
+ d-cache-line-size = <32>;
+ i-cache-size = <32768>;
+ d-cache-size = <32768>;
dcr-controller;
dcr-access-method = "native";
};
memory {
device_type = "memory";
- reg = <0 0 0>; /* Filled in by U-Boot */
+ reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by U-Boot */
};
UIC0: interrupt-controller0 {
compatible = "ibm,uic-460gt","ibm,uic";
interrupt-controller;
cell-index = <0>;
- dcr-reg = <0c0 009>;
+ dcr-reg = <0x0c0 0x009>;
#address-cells = <0>;
#size-cells = <0>;
#interrupt-cells = <2>;
compatible = "ibm,uic-460gt","ibm,uic";
interrupt-controller;
cell-index = <1>;
- dcr-reg = <0d0 009>;
+ dcr-reg = <0x0d0 0x009>;
#address-cells = <0>;
#size-cells = <0>;
#interrupt-cells = <2>;
- interrupts = <1e 4 1f 4>; /* cascade */
+ interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
interrupt-parent = <&UIC0>;
};
compatible = "ibm,uic-460gt","ibm,uic";
interrupt-controller;
cell-index = <2>;
- dcr-reg = <0e0 009>;
+ dcr-reg = <0x0e0 0x009>;
#address-cells = <0>;
#size-cells = <0>;
#interrupt-cells = <2>;
- interrupts = <a 4 b 4>; /* cascade */
+ interrupts = <0xa 0x4 0xb 0x4>; /* cascade */
interrupt-parent = <&UIC0>;
};
compatible = "ibm,uic-460gt","ibm,uic";
interrupt-controller;
cell-index = <3>;
- dcr-reg = <0f0 009>;
+ dcr-reg = <0x0f0 0x009>;
#address-cells = <0>;
#size-cells = <0>;
#interrupt-cells = <2>;
- interrupts = <10 4 11 4>; /* cascade */
+ interrupts = <0x10 0x4 0x11 0x4>; /* cascade */
interrupt-parent = <&UIC0>;
};
SDR0: sdr {
compatible = "ibm,sdr-460gt";
- dcr-reg = <00e 002>;
+ dcr-reg = <0x00e 0x002>;
};
CPR0: cpr {
compatible = "ibm,cpr-460gt";
- dcr-reg = <00c 002>;
+ dcr-reg = <0x00c 0x002>;
};
plb {
SDRAM0: sdram {
compatible = "ibm,sdram-460gt", "ibm,sdram-405gp";
- dcr-reg = <010 2>;
+ dcr-reg = <0x010 0x002>;
};
MAL0: mcmal {
compatible = "ibm,mcmal-460gt", "ibm,mcmal2";
- dcr-reg = <180 62>;
+ dcr-reg = <0x180 0x062>;
num-tx-chans = <4>;
- num-rx-chans = <20>;
+ num-rx-chans = <32>;
#address-cells = <0>;
#size-cells = <0>;
interrupt-parent = <&UIC2>;
- interrupts = < /*TXEOB*/ 6 4
- /*RXEOB*/ 7 4
- /*SERR*/ 3 4
- /*TXDE*/ 4 4
- /*RXDE*/ 5 4>;
- desc-base-addr-high = <8>;
+ interrupts = < /*TXEOB*/ 0x6 0x4
+ /*RXEOB*/ 0x7 0x4
+ /*SERR*/ 0x3 0x4
+ /*TXDE*/ 0x4 0x4
+ /*RXDE*/ 0x5 0x4>;
+ desc-base-addr-high = <0x8>;
};
POB0: opb {
compatible = "ibm,opb-460gt", "ibm,opb";
#address-cells = <1>;
#size-cells = <1>;
- ranges = <b0000000 4 b0000000 50000000>;
+ ranges = <0xb0000000 0x00000004 0xb0000000 0x50000000>;
clock-frequency = <0>; /* Filled in by U-Boot */
EBC0: ebc {
compatible = "ibm,ebc-460gt", "ibm,ebc";
- dcr-reg = <012 2>;
+ dcr-reg = <0x012 0x002>;
#address-cells = <2>;
#size-cells = <1>;
clock-frequency = <0>; /* Filled in by U-Boot */
/* ranges property is supplied by U-Boot */
- interrupts = <6 4>;
+ interrupts = <0x6 0x4>;
interrupt-parent = <&UIC1>;
nor_flash@0,0 {
compatible = "amd,s29gl512n", "cfi-flash";
bank-width = <2>;
- reg = <0 000000 4000000>;
+ reg = <0x00000000 0x00000000 0x04000000>;
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "kernel";
- reg = <0 1e0000>;
+ reg = <0x00000000 0x001e0000>;
};
partition@1e0000 {
label = "dtb";
- reg = <1e0000 20000>;
+ reg = <0x001e0000 0x00020000>;
};
partition@200000 {
label = "ramdisk";
- reg = <200000 1400000>;
+ reg = <0x00200000 0x01400000>;
};
partition@1600000 {
label = "jffs2";
- reg = <1600000 400000>;
+ reg = <0x01600000 0x00400000>;
};
partition@1a00000 {
label = "user";
- reg = <1a00000 2560000>;
+ reg = <0x01a00000 0x02560000>;
};
partition@3f60000 {
label = "env";
- reg = <3f60000 40000>;
+ reg = <0x03f60000 0x00040000>;
};
partition@3fa0000 {
label = "u-boot";
- reg = <3fa0000 60000>;
+ reg = <0x03fa0000 0x00060000>;
};
};
};
UART0: serial@ef600300 {
device_type = "serial";
compatible = "ns16550";
- reg = <ef600300 8>;
- virtual-reg = <ef600300>;
+ reg = <0xef600300 0x00000008>;
+ virtual-reg = <0xef600300>;
clock-frequency = <0>; /* Filled in by U-Boot */
current-speed = <0>; /* Filled in by U-Boot */
interrupt-parent = <&UIC1>;
- interrupts = <1 4>;
+ interrupts = <0x1 0x4>;
};
UART1: serial@ef600400 {
device_type = "serial";
compatible = "ns16550";
- reg = <ef600400 8>;
- virtual-reg = <ef600400>;
+ reg = <0xef600400 0x00000008>;
+ virtual-reg = <0xef600400>;
clock-frequency = <0>; /* Filled in by U-Boot */
current-speed = <0>; /* Filled in by U-Boot */
interrupt-parent = <&UIC0>;
- interrupts = <1 4>;
+ interrupts = <0x1 0x4>;
};
UART2: serial@ef600500 {
device_type = "serial";
compatible = "ns16550";
- reg = <ef600500 8>;
- virtual-reg = <ef600500>;
+ reg = <0xef600500 0x00000008>;
+ virtual-reg = <0xef600500>;
clock-frequency = <0>; /* Filled in by U-Boot */
current-speed = <0>; /* Filled in by U-Boot */
interrupt-parent = <&UIC1>;
- interrupts = <1d 4>;
+ interrupts = <0x1d 0x4>;
};
UART3: serial@ef600600 {
device_type = "serial";
compatible = "ns16550";
- reg = <ef600600 8>;
- virtual-reg = <ef600600>;
+ reg = <0xef600600 0x00000008>;
+ virtual-reg = <0xef600600>;
clock-frequency = <0>; /* Filled in by U-Boot */
current-speed = <0>; /* Filled in by U-Boot */
interrupt-parent = <&UIC1>;
- interrupts = <1e 4>;
+ interrupts = <0x1e 0x4>;
};
IIC0: i2c@ef600700 {
compatible = "ibm,iic-460gt", "ibm,iic";
- reg = <ef600700 14>;
+ reg = <0xef600700 0x00000014>;
interrupt-parent = <&UIC0>;
- interrupts = <2 4>;
+ interrupts = <0x2 0x4>;
};
IIC1: i2c@ef600800 {
compatible = "ibm,iic-460gt", "ibm,iic";
- reg = <ef600800 14>;
+ reg = <0xef600800 0x00000014>;
interrupt-parent = <&UIC0>;
- interrupts = <3 4>;
+ interrupts = <0x3 0x4>;
};
ZMII0: emac-zmii@ef600d00 {
compatible = "ibm,zmii-460gt", "ibm,zmii";
- reg = <ef600d00 c>;
+ reg = <0xef600d00 0x0000000c>;
};
RGMII0: emac-rgmii@ef601500 {
compatible = "ibm,rgmii-460gt", "ibm,rgmii";
- reg = <ef601500 8>;
+ reg = <0xef601500 0x00000008>;
has-mdio;
};
RGMII1: emac-rgmii@ef601600 {
compatible = "ibm,rgmii-460gt", "ibm,rgmii";
- reg = <ef601600 8>;
+ reg = <0xef601600 0x00000008>;
has-mdio;
};
TAH0: emac-tah@ef601350 {
compatible = "ibm,tah-460gt", "ibm,tah";
- reg = <ef601350 30>;
+ reg = <0xef601350 0x00000030>;
};
TAH1: emac-tah@ef601450 {
compatible = "ibm,tah-460gt", "ibm,tah";
- reg = <ef601450 30>;
+ reg = <0xef601450 0x00000030>;
};
EMAC0: ethernet@ef600e00 {
device_type = "network";
compatible = "ibm,emac-460gt", "ibm,emac4";
interrupt-parent = <&EMAC0>;
- interrupts = <0 1>;
+ interrupts = <0x0 0x1>;
#interrupt-cells = <1>;
#address-cells = <0>;
#size-cells = <0>;
- interrupt-map = </*Status*/ 0 &UIC2 10 4
- /*Wake*/ 1 &UIC2 14 4>;
- reg = <ef600e00 70>;
+ interrupt-map = </*Status*/ 0x0 &UIC2 0x10 0x4
+ /*Wake*/ 0x1 &UIC2 0x14 0x4>;
+ reg = <0xef600e00 0x00000070>;
local-mac-address = [000000000000]; /* Filled in by U-Boot */
mal-device = <&MAL0>;
mal-tx-channel = <0>;
mal-rx-channel = <0>;
cell-index = <0>;
- max-frame-size = <2328>;
- rx-fifo-size = <1000>;
- tx-fifo-size = <800>;
+ max-frame-size = <9000>;
+ rx-fifo-size = <4096>;
+ tx-fifo-size = <2048>;
phy-mode = "rgmii";
- phy-map = <00000000>;
+ phy-map = <0x00000000>;
rgmii-device = <&RGMII0>;
rgmii-channel = <0>;
tah-device = <&TAH0>;
device_type = "network";
compatible = "ibm,emac-460gt", "ibm,emac4";
interrupt-parent = <&EMAC1>;
- interrupts = <0 1>;
+ interrupts = <0x0 0x1>;
#interrupt-cells = <1>;
#address-cells = <0>;
#size-cells = <0>;
- interrupt-map = </*Status*/ 0 &UIC2 11 4
- /*Wake*/ 1 &UIC2 15 4>;
- reg = <ef600f00 70>;
+ interrupt-map = </*Status*/ 0x0 &UIC2 0x11 0x4
+ /*Wake*/ 0x1 &UIC2 0x15 0x4>;
+ reg = <0xef600f00 0x00000070>;
local-mac-address = [000000000000]; /* Filled in by U-Boot */
mal-device = <&MAL0>;
mal-tx-channel = <1>;
mal-rx-channel = <8>;
cell-index = <1>;
- max-frame-size = <2328>;
- rx-fifo-size = <1000>;
- tx-fifo-size = <800>;
+ max-frame-size = <9000>;
+ rx-fifo-size = <4096>;
+ tx-fifo-size = <2048>;
phy-mode = "rgmii";
- phy-map = <00000000>;
+ phy-map = <0x00000000>;
rgmii-device = <&RGMII0>;
rgmii-channel = <1>;
tah-device = <&TAH1>;
device_type = "network";
compatible = "ibm,emac-460gt", "ibm,emac4";
interrupt-parent = <&EMAC2>;
- interrupts = <0 1>;
+ interrupts = <0x0 0x1>;
#interrupt-cells = <1>;
#address-cells = <0>;
#size-cells = <0>;
- interrupt-map = </*Status*/ 0 &UIC2 12 4
- /*Wake*/ 1 &UIC2 16 4>;
- reg = <ef601100 70>;
+ interrupt-map = </*Status*/ 0x0 &UIC2 0x12 0x4
+ /*Wake*/ 0x1 &UIC2 0x16 0x4>;
+ reg = <0xef601100 0x00000070>;
local-mac-address = [000000000000]; /* Filled in by U-Boot */
mal-device = <&MAL0>;
mal-tx-channel = <2>;
- mal-rx-channel = <10>;
+ mal-rx-channel = <16>;
cell-index = <2>;
- max-frame-size = <2328>;
- rx-fifo-size = <1000>;
- tx-fifo-size = <800>;
+ max-frame-size = <9000>;
+ rx-fifo-size = <4096>;
+ tx-fifo-size = <2048>;
phy-mode = "rgmii";
- phy-map = <00000000>;
+ phy-map = <0x00000000>;
rgmii-device = <&RGMII1>;
rgmii-channel = <0>;
has-inverted-stacr-oc;
device_type = "network";
compatible = "ibm,emac-460gt", "ibm,emac4";
interrupt-parent = <&EMAC3>;
- interrupts = <0 1>;
+ interrupts = <0x0 0x1>;
#interrupt-cells = <1>;
#address-cells = <0>;
#size-cells = <0>;
- interrupt-map = </*Status*/ 0 &UIC2 13 4
- /*Wake*/ 1 &UIC2 17 4>;
- reg = <ef601200 70>;
+ interrupt-map = </*Status*/ 0x0 &UIC2 0x13 0x4
+ /*Wake*/ 0x1 &UIC2 0x17 0x4>;
+ reg = <0xef601200 0x00000070>;
local-mac-address = [000000000000]; /* Filled in by U-Boot */
mal-device = <&MAL0>;
mal-tx-channel = <3>;
- mal-rx-channel = <18>;
+ mal-rx-channel = <24>;
cell-index = <3>;
- max-frame-size = <2328>;
- rx-fifo-size = <1000>;
- tx-fifo-size = <800>;
+ max-frame-size = <9000>;
+ rx-fifo-size = <4096>;
+ tx-fifo-size = <2048>;
phy-mode = "rgmii";
- phy-map = <00000000>;
+ phy-map = <0x00000000>;
rgmii-device = <&RGMII1>;
rgmii-channel = <1>;
has-inverted-stacr-oc;
primary;
large-inbound-windows;
enable-msi-hole;
- reg = <c 0ec00000 8 /* Config space access */
- 0 0 0 /* no IACK cycles */
- c 0ed00000 4 /* Special cycles */
- c 0ec80000 100 /* Internal registers */
- c 0ec80100 fc>; /* Internal messaging registers */
+ reg = <0x0000000c 0x0ec00000 0x00000008 /* Config space access */
+ 0x00000000 0x00000000 0x00000000 /* no IACK cycles */
+ 0x0000000c 0x0ed00000 0x00000004 /* Special cycles */
+ 0x0000000c 0x0ec80000 0x00000100 /* Internal registers */
+ 0x0000000c 0x0ec80100 0x000000fc>; /* Internal messaging registers */
/* Outbound ranges, one memory and one IO,
* later cannot be changed
*/
- ranges = <02000000 0 80000000 0000000d 80000000 0 80000000
- 01000000 0 00000000 0000000c 08000000 0 00010000>;
+ ranges = <0x02000000 0x00000000 0x80000000 0x0000000d 0x80000000 0x00000000 0x80000000
+ 0x01000000 0x00000000 0x00000000 0x0000000c 0x08000000 0x00000000 0x00010000>;
/* Inbound 2GB range starting at 0 */
- dma-ranges = <42000000 0 0 0 0 0 80000000>;
+ dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
/* This drives busses 0 to 0x3f */
- bus-range = <0 3f>;
+ bus-range = <0x0 0x3f>;
/* All PCI interrupts are routed to ext IRQ 2 -> UIC1-0 */
- interrupt-map-mask = <0000 0 0 0>;
- interrupt-map = < 0000 0 0 0 &UIC1 0 8 >;
+ interrupt-map-mask = <0x0 0x0 0x0 0x0>;
+ interrupt-map = < 0x0 0x0 0x0 0x0 &UIC1 0x0 0x8 >;
};
PCIE0: pciex@d00000000 {
#address-cells = <3>;
compatible = "ibm,plb-pciex-460ex", "ibm,plb-pciex";
primary;
- port = <0>; /* port number */
- reg = <d 00000000 20000000 /* Config space access */
- c 08010000 00001000>; /* Registers */
- dcr-reg = <100 020>;
- sdr-base = <300>;
+ port = <0x0>; /* port number */
+ reg = <0x0000000d 0x00000000 0x20000000 /* Config space access */
+ 0x0000000c 0x08010000 0x00001000>; /* Registers */
+ dcr-reg = <0x100 0x020>;
+ sdr-base = <0x300>;
/* Outbound ranges, one memory and one IO,
* later cannot be changed
*/
- ranges = <02000000 0 80000000 0000000e 00000000 0 80000000
- 01000000 0 00000000 0000000f 80000000 0 00010000>;
+ ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x00000000 0x00000000 0x80000000
+ 0x01000000 0x00000000 0x00000000 0x0000000f 0x80000000 0x00000000 0x00010000>;
/* Inbound 2GB range starting at 0 */
- dma-ranges = <42000000 0 0 0 0 0 80000000>;
+ dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
/* This drives busses 40 to 0x7f */
- bus-range = <40 7f>;
+ bus-range = <0x40 0x7f>;
/* Legacy interrupts (note the weird polarity, the bridge seems
* to invert PCIe legacy interrupts).
* below are basically de-swizzled numbers.
* The real slot is on idsel 0, so the swizzling is 1:1
*/
- interrupt-map-mask = <0000 0 0 7>;
+ interrupt-map-mask = <0x0 0x0 0x0 0x7>;
interrupt-map = <
- 0000 0 0 1 &UIC3 c 4 /* swizzled int A */
- 0000 0 0 2 &UIC3 d 4 /* swizzled int B */
- 0000 0 0 3 &UIC3 e 4 /* swizzled int C */
- 0000 0 0 4 &UIC3 f 4 /* swizzled int D */>;
+ 0x0 0x0 0x0 0x1 &UIC3 0xc 0x4 /* swizzled int A */
+ 0x0 0x0 0x0 0x2 &UIC3 0xd 0x4 /* swizzled int B */
+ 0x0 0x0 0x0 0x3 &UIC3 0xe 0x4 /* swizzled int C */
+ 0x0 0x0 0x0 0x4 &UIC3 0xf 0x4 /* swizzled int D */>;
};
PCIE1: pciex@d20000000 {
#address-cells = <3>;
compatible = "ibm,plb-pciex-460ex", "ibm,plb-pciex";
primary;
- port = <1>; /* port number */
- reg = <d 20000000 20000000 /* Config space access */
- c 08011000 00001000>; /* Registers */
- dcr-reg = <120 020>;
- sdr-base = <340>;
+ port = <0x1>; /* port number */
+ reg = <0x0000000d 0x20000000 0x20000000 /* Config space access */
+ 0x0000000c 0x08011000 0x00001000>; /* Registers */
+ dcr-reg = <0x120 0x020>;
+ sdr-base = <0x340>;
/* Outbound ranges, one memory and one IO,
* later cannot be changed
*/
- ranges = <02000000 0 80000000 0000000e 80000000 0 80000000
- 01000000 0 00000000 0000000f 80010000 0 00010000>;
+ ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x80000000 0x00000000 0x80000000
+ 0x01000000 0x00000000 0x00000000 0x0000000f 0x80010000 0x00000000 0x00010000>;
/* Inbound 2GB range starting at 0 */
- dma-ranges = <42000000 0 0 0 0 0 80000000>;
+ dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
/* This drives busses 80 to 0xbf */
- bus-range = <80 bf>;
+ bus-range = <0x80 0xbf>;
/* Legacy interrupts (note the weird polarity, the bridge seems
* to invert PCIe legacy interrupts).
* below are basically de-swizzled numbers.
* The real slot is on idsel 0, so the swizzling is 1:1
*/
- interrupt-map-mask = <0000 0 0 7>;
+ interrupt-map-mask = <0x0 0x0 0x0 0x7>;
interrupt-map = <
- 0000 0 0 1 &UIC3 10 4 /* swizzled int A */
- 0000 0 0 2 &UIC3 11 4 /* swizzled int B */
- 0000 0 0 3 &UIC3 12 4 /* swizzled int C */
- 0000 0 0 4 &UIC3 13 4 /* swizzled int D */>;
+ 0x0 0x0 0x0 0x1 &UIC3 0x10 0x4 /* swizzled int A */
+ 0x0 0x0 0x0 0x2 &UIC3 0x11 0x4 /* swizzled int B */
+ 0x0 0x0 0x0 0x3 &UIC3 0x12 0x4 /* swizzled int C */
+ 0x0 0x0 0x0 0x4 &UIC3 0x13 0x4 /* swizzled int D */>;
};
};
};
* any warranty of any kind, whether express or implied.
*/
+/dts-v1/;
+
/ {
#address-cells = <1>;
#size-cells = <1>;
model = "amcc,haleakala";
compatible = "amcc,haleakala", "amcc,kilauea";
- dcr-parent = <&/cpus/cpu@0>;
+ dcr-parent = <&{/cpus/cpu@0}>;
aliases {
ethernet0 = &EMAC0;
cpu@0 {
device_type = "cpu";
model = "PowerPC,405EXr";
- reg = <0>;
+ reg = <0x00000000>;
clock-frequency = <0>; /* Filled in by U-Boot */
timebase-frequency = <0>; /* Filled in by U-Boot */
- i-cache-line-size = <20>;
- d-cache-line-size = <20>;
- i-cache-size = <4000>; /* 16 kB */
- d-cache-size = <4000>; /* 16 kB */
+ i-cache-line-size = <32>;
+ d-cache-line-size = <32>;
+ i-cache-size = <16384>; /* 16 kB */
+ d-cache-size = <16384>; /* 16 kB */
dcr-controller;
dcr-access-method = "native";
};
memory {
device_type = "memory";
- reg = <0 0>; /* Filled in by U-Boot */
+ reg = <0x00000000 0x00000000>; /* Filled in by U-Boot */
};
UIC0: interrupt-controller {
compatible = "ibm,uic-405exr", "ibm,uic";
interrupt-controller;
cell-index = <0>;
- dcr-reg = <0c0 009>;
+ dcr-reg = <0x0c0 0x009>;
#address-cells = <0>;
#size-cells = <0>;
#interrupt-cells = <2>;
compatible = "ibm,uic-405exr","ibm,uic";
interrupt-controller;
cell-index = <1>;
- dcr-reg = <0d0 009>;
+ dcr-reg = <0x0d0 0x009>;
#address-cells = <0>;
#size-cells = <0>;
#interrupt-cells = <2>;
- interrupts = <1e 4 1f 4>; /* cascade */
+ interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
interrupt-parent = <&UIC0>;
};
compatible = "ibm,uic-405exr","ibm,uic";
interrupt-controller;
cell-index = <2>;
- dcr-reg = <0e0 009>;
+ dcr-reg = <0x0e0 0x009>;
#address-cells = <0>;
#size-cells = <0>;
#interrupt-cells = <2>;
- interrupts = <1c 4 1d 4>; /* cascade */
+ interrupts = <0x1c 0x4 0x1d 0x4>; /* cascade */
interrupt-parent = <&UIC0>;
};
SDRAM0: memory-controller {
compatible = "ibm,sdram-405exr";
- dcr-reg = <010 2>;
+ dcr-reg = <0x010 0x002>;
};
MAL0: mcmal {
compatible = "ibm,mcmal-405exr", "ibm,mcmal2";
- dcr-reg = <180 62>;
+ dcr-reg = <0x180 0x062>;
num-tx-chans = <2>;
num-rx-chans = <2>;
interrupt-parent = <&MAL0>;
- interrupts = <0 1 2 3 4>;
+ interrupts = <0x0 0x1 0x2 0x3 0x4>;
#interrupt-cells = <1>;
#address-cells = <0>;
#size-cells = <0>;
- interrupt-map = </*TXEOB*/ 0 &UIC0 a 4
- /*RXEOB*/ 1 &UIC0 b 4
- /*SERR*/ 2 &UIC1 0 4
- /*TXDE*/ 3 &UIC1 1 4
- /*RXDE*/ 4 &UIC1 2 4>;
- interrupt-map-mask = <ffffffff>;
+ interrupt-map = </*TXEOB*/ 0x0 &UIC0 0xa 0x4
+ /*RXEOB*/ 0x1 &UIC0 0xb 0x4
+ /*SERR*/ 0x2 &UIC1 0x0 0x4
+ /*TXDE*/ 0x3 &UIC1 0x1 0x4
+ /*RXDE*/ 0x4 &UIC1 0x2 0x4>;
+ interrupt-map-mask = <0xffffffff>;
};
POB0: opb {
compatible = "ibm,opb-405exr", "ibm,opb";
#address-cells = <1>;
#size-cells = <1>;
- ranges = <80000000 80000000 10000000
- ef600000 ef600000 a00000
- f0000000 f0000000 10000000>;
- dcr-reg = <0a0 5>;
+ ranges = <0x80000000 0x80000000 0x10000000
+ 0xef600000 0xef600000 0x00a00000
+ 0xf0000000 0xf0000000 0x10000000>;
+ dcr-reg = <0x0a0 0x005>;
clock-frequency = <0>; /* Filled in by U-Boot */
EBC0: ebc {
compatible = "ibm,ebc-405exr", "ibm,ebc";
- dcr-reg = <012 2>;
+ dcr-reg = <0x012 0x002>;
#address-cells = <2>;
#size-cells = <1>;
clock-frequency = <0>; /* Filled in by U-Boot */
/* ranges property is supplied by U-Boot */
- interrupts = <5 1>;
+ interrupts = <0x5 0x1>;
interrupt-parent = <&UIC1>;
nor_flash@0,0 {
compatible = "amd,s29gl512n", "cfi-flash";
bank-width = <2>;
- reg = <0 000000 4000000>;
+ reg = <0x00000000 0x00000000 0x04000000>;
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "kernel";
- reg = <0 200000>;
+ reg = <0x00000000 0x00200000>;
};
partition@200000 {
label = "root";
- reg = <200000 200000>;
+ reg = <0x00200000 0x00200000>;
};
partition@400000 {
label = "user";
- reg = <400000 3b60000>;
+ reg = <0x00400000 0x03b60000>;
};
partition@3f60000 {
label = "env";
- reg = <3f60000 40000>;
+ reg = <0x03f60000 0x00040000>;
};
partition@3fa0000 {
label = "u-boot";
- reg = <3fa0000 60000>;
+ reg = <0x03fa0000 0x00060000>;
};
};
};
UART0: serial@ef600200 {
device_type = "serial";
compatible = "ns16550";
- reg = <ef600200 8>;
- virtual-reg = <ef600200>;
+ reg = <0xef600200 0x00000008>;
+ virtual-reg = <0xef600200>;
clock-frequency = <0>; /* Filled in by U-Boot */
current-speed = <0>;
interrupt-parent = <&UIC0>;
- interrupts = <1a 4>;
+ interrupts = <0x1a 0x4>;
};
UART1: serial@ef600300 {
device_type = "serial";
compatible = "ns16550";
- reg = <ef600300 8>;
- virtual-reg = <ef600300>;
+ reg = <0xef600300 0x00000008>;
+ virtual-reg = <0xef600300>;
clock-frequency = <0>; /* Filled in by U-Boot */
current-speed = <0>;
interrupt-parent = <&UIC0>;
- interrupts = <1 4>;
+ interrupts = <0x1 0x4>;
};
IIC0: i2c@ef600400 {
compatible = "ibm,iic-405exr", "ibm,iic";
- reg = <ef600400 14>;
+ reg = <0xef600400 0x00000014>;
interrupt-parent = <&UIC0>;
- interrupts = <2 4>;
+ interrupts = <0x2 0x4>;
};
IIC1: i2c@ef600500 {
compatible = "ibm,iic-405exr", "ibm,iic";
- reg = <ef600500 14>;
+ reg = <0xef600500 0x00000014>;
interrupt-parent = <&UIC0>;
- interrupts = <7 4>;
+ interrupts = <0x7 0x4>;
};
RGMII0: emac-rgmii@ef600b00 {
compatible = "ibm,rgmii-405exr", "ibm,rgmii";
- reg = <ef600b00 104>;
+ reg = <0xef600b00 0x00000104>;
has-mdio;
};
EMAC0: ethernet@ef600900 {
- linux,network-index = <0>;
+ linux,network-index = <0x0>;
device_type = "network";
compatible = "ibm,emac-405exr", "ibm,emac4";
interrupt-parent = <&EMAC0>;
- interrupts = <0 1>;
+ interrupts = <0x0 0x1>;
#interrupt-cells = <1>;
#address-cells = <0>;
#size-cells = <0>;
- interrupt-map = </*Status*/ 0 &UIC0 18 4
- /*Wake*/ 1 &UIC1 1d 4>;
- reg = <ef600900 70>;
+ interrupt-map = </*Status*/ 0x0 &UIC0 0x18 0x4
+ /*Wake*/ 0x1 &UIC1 0x1d 0x4>;
+ reg = <0xef600900 0x00000070>;
local-mac-address = [000000000000]; /* Filled in by U-Boot */
mal-device = <&MAL0>;
mal-tx-channel = <0>;
mal-rx-channel = <0>;
cell-index = <0>;
- max-frame-size = <2328>;
- rx-fifo-size = <1000>;
- tx-fifo-size = <800>;
+ max-frame-size = <9000>;
+ rx-fifo-size = <4096>;
+ tx-fifo-size = <2048>;
phy-mode = "rgmii";
- phy-map = <00000000>;
+ phy-map = <0x00000000>;
rgmii-device = <&RGMII0>;
rgmii-channel = <0>;
has-inverted-stacr-oc;
#address-cells = <3>;
compatible = "ibm,plb-pciex-405ex", "ibm,plb-pciex";
primary;
- port = <0>; /* port number */
- reg = <a0000000 20000000 /* Config space access */
- ef000000 00001000>; /* Registers */
- dcr-reg = <040 020>;
- sdr-base = <400>;
+ port = <0x0>; /* port number */
+ reg = <0xa0000000 0x20000000 /* Config space access */
+ 0xef000000 0x00001000>; /* Registers */
+ dcr-reg = <0x040 0x020>;
+ sdr-base = <0x400>;
/* Outbound ranges, one memory and one IO,
* later cannot be changed
*/
- ranges = <02000000 0 80000000 90000000 0 08000000
- 01000000 0 00000000 e0000000 0 00010000>;
+ ranges = <0x02000000 0x00000000 0x80000000 0x90000000 0x00000000 0x08000000
+ 0x01000000 0x00000000 0x00000000 0xe0000000 0x00000000 0x00010000>;
/* Inbound 2GB range starting at 0 */
- dma-ranges = <42000000 0 0 0 0 80000000>;
+ dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x80000000>;
/* This drives busses 0x00 to 0x3f */
- bus-range = <00 3f>;
+ bus-range = <0x0 0x3f>;
/* Legacy interrupts (note the weird polarity, the bridge seems
* to invert PCIe legacy interrupts).
* below are basically de-swizzled numbers.
* The real slot is on idsel 0, so the swizzling is 1:1
*/
- interrupt-map-mask = <0000 0 0 7>;
+ interrupt-map-mask = <0x0 0x0 0x0 0x7>;
interrupt-map = <
- 0000 0 0 1 &UIC2 0 4 /* swizzled int A */
- 0000 0 0 2 &UIC2 1 4 /* swizzled int B */
- 0000 0 0 3 &UIC2 2 4 /* swizzled int C */
- 0000 0 0 4 &UIC2 3 4 /* swizzled int D */>;
+ 0x0 0x0 0x0 0x1 &UIC2 0x0 0x4 /* swizzled int A */
+ 0x0 0x0 0x0 0x2 &UIC2 0x1 0x4 /* swizzled int B */
+ 0x0 0x0 0x0 0x3 &UIC2 0x2 0x4 /* swizzled int C */
+ 0x0 0x0 0x0 0x4 &UIC2 0x3 0x4 /* swizzled int D */>;
};
};
};
* any warranty of any kind, whether express or implied.
*/
+/dts-v1/;
+
/ {
model = "41K7339";
compatible = "ibm,holly";
#size-cells =<0>;
PowerPC,750CL@0 {
device_type = "cpu";
- reg = <0>;
- d-cache-line-size = <20>;
- i-cache-line-size = <20>;
- d-cache-size = <8000>;
- i-cache-size = <8000>;
- d-cache-sets = <80>;
- i-cache-sets = <80>;
- timebase-frequency = <2faf080>;
- clock-frequency = <23c34600>;
- bus-frequency = <bebc200>;
+ reg = <0x00000000>;
+ d-cache-line-size = <32>;
+ i-cache-line-size = <32>;
+ d-cache-size = <32768>;
+ i-cache-size = <32768>;
+ d-cache-sets = <128>;
+ i-cache-sets = <128>;
+ timebase-frequency = <50000000>;
+ clock-frequency = <600000000>;
+ bus-frequency = <200000000>;
};
};
memory@0 {
device_type = "memory";
- reg = <00000000 20000000>;
+ reg = <0x00000000 0x20000000>;
};
tsi109@c0000000 {
compatible = "tsi109-bridge", "tsi108-bridge";
#address-cells = <1>;
#size-cells = <1>;
- ranges = <00000000 c0000000 00010000>;
- reg = <c0000000 00010000>;
+ ranges = <0x00000000 0xc0000000 0x00010000>;
+ reg = <0xc0000000 0x00010000>;
i2c@7000 {
device_type = "i2c";
compatible = "tsi109-i2c", "tsi108-i2c";
interrupt-parent = <&MPIC>;
- interrupts = <e 2>;
- reg = <7000 400>;
+ interrupts = <0xe 0x2>;
+ reg = <0x00007000 0x00000400>;
};
MDIO: mdio@6000 {
device_type = "mdio";
compatible = "tsi109-mdio", "tsi108-mdio";
- reg = <6000 50>;
+ reg = <0x00006000 0x00000050>;
#address-cells = <1>;
#size-cells = <0>;
PHY1: ethernet-phy@1 {
compatible = "bcm5461a";
- reg = <1>;
+ reg = <0x00000001>;
txc-rxc-delay-disable;
};
PHY2: ethernet-phy@2 {
compatible = "bcm5461a";
- reg = <2>;
+ reg = <0x00000002>;
txc-rxc-delay-disable;
};
};
compatible = "tsi109-ethernet", "tsi108-ethernet";
#address-cells = <1>;
#size-cells = <0>;
- reg = <6000 200>;
+ reg = <0x00006000 0x00000200>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupt-parent = <&MPIC>;
- interrupts = <10 2>;
+ interrupts = <0x10 0x2>;
mdio-handle = <&MDIO>;
phy-handle = <&PHY1>;
};
compatible = "tsi109-ethernet", "tsi108-ethernet";
#address-cells = <1>;
#size-cells = <0>;
- reg = <6400 200>;
+ reg = <0x00006400 0x00000200>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupt-parent = <&MPIC>;
- interrupts = <11 2>;
+ interrupts = <0x11 0x2>;
mdio-handle = <&MDIO>;
phy-handle = <&PHY2>;
};
serial@7808 {
device_type = "serial";
compatible = "ns16550";
- reg = <7808 200>;
- virtual-reg = <c0007808>;
- clock-frequency = <3F9C6000>;
- current-speed = <1c200>;
+ reg = <0x00007808 0x00000200>;
+ virtual-reg = <0xc0007808>;
+ clock-frequency = <1067212800>;
+ current-speed = <115200>;
interrupt-parent = <&MPIC>;
- interrupts = <c 2>;
+ interrupts = <0xc 0x2>;
};
serial@7c08 {
device_type = "serial";
compatible = "ns16550";
- reg = <7c08 200>;
- virtual-reg = <c0007c08>;
- clock-frequency = <3F9C6000>;
- current-speed = <1c200>;
+ reg = <0x00007c08 0x00000200>;
+ virtual-reg = <0xc0007c08>;
+ clock-frequency = <1067212800>;
+ current-speed = <115200>;
interrupt-parent = <&MPIC>;
- interrupts = <d 2>;
+ interrupts = <0xd 0x2>;
};
MPIC: pic@7400 {
compatible = "chrp,open-pic";
interrupt-controller;
#interrupt-cells = <2>;
- reg = <7400 400>;
+ reg = <0x00007400 0x00000400>;
big-endian;
};
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
- reg = <1000 1000>;
- bus-range = <0 0>;
+ reg = <0x00001000 0x00001000>;
+ bus-range = <0x0 0x0>;
/*----------------------------------------------------+
| PCI memory range.
| 01 denotes I/O space
| 02 denotes 32-bit memory space
+----------------------------------------------------*/
- ranges = <02000000 0 40000000 40000000 0 10000000
- 01000000 0 00000000 7e000000 0 00010000>;
- clock-frequency = <7f28154>;
+ ranges = <0x02000000 0x00000000 0x40000000 0x40000000 0x00000000 0x10000000
+ 0x01000000 0x00000000 0x00000000 0x7e000000 0x00000000 0x00010000>;
+ clock-frequency = <133333332>;
interrupt-parent = <&MPIC>;
- interrupts = <17 2>;
- interrupt-map-mask = <f800 0 0 7>;
+ interrupts = <0x17 0x2>;
+ interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
/*----------------------------------------------------+
| The INTA, INTB, INTC, INTD are shared.
+----------------------------------------------------*/
interrupt-map = <
- 0800 0 0 1 &RT0 24 0
- 0800 0 0 2 &RT0 25 0
- 0800 0 0 3 &RT0 26 0
- 0800 0 0 4 &RT0 27 0
-
- 1000 0 0 1 &RT0 25 0
- 1000 0 0 2 &RT0 26 0
- 1000 0 0 3 &RT0 27 0
- 1000 0 0 4 &RT0 24 0
-
- 1800 0 0 1 &RT0 26 0
- 1800 0 0 2 &RT0 27 0
- 1800 0 0 3 &RT0 24 0
- 1800 0 0 4 &RT0 25 0
-
- 2000 0 0 1 &RT0 27 0
- 2000 0 0 2 &RT0 24 0
- 2000 0 0 3 &RT0 25 0
- 2000 0 0 4 &RT0 26 0
+ 0x800 0x0 0x0 0x1 &RT0 0x24 0x0
+ 0x800 0x0 0x0 0x2 &RT0 0x25 0x0
+ 0x800 0x0 0x0 0x3 &RT0 0x26 0x0
+ 0x800 0x0 0x0 0x4 &RT0 0x27 0x0
+
+ 0x1000 0x0 0x0 0x1 &RT0 0x25 0x0
+ 0x1000 0x0 0x0 0x2 &RT0 0x26 0x0
+ 0x1000 0x0 0x0 0x3 &RT0 0x27 0x0
+ 0x1000 0x0 0x0 0x4 &RT0 0x24 0x0
+
+ 0x1800 0x0 0x0 0x1 &RT0 0x26 0x0
+ 0x1800 0x0 0x0 0x2 &RT0 0x27 0x0
+ 0x1800 0x0 0x0 0x3 &RT0 0x24 0x0
+ 0x1800 0x0 0x0 0x4 &RT0 0x25 0x0
+
+ 0x2000 0x0 0x0 0x1 &RT0 0x27 0x0
+ 0x2000 0x0 0x0 0x2 &RT0 0x24 0x0
+ 0x2000 0x0 0x0 0x3 &RT0 0x25 0x0
+ 0x2000 0x0 0x0 0x4 &RT0 0x26 0x0
>;
RT0: router@1180 {
clock-frequency = <0>;
#address-cells = <0>;
#interrupt-cells = <2>;
- interrupts = <17 2>;
+ interrupts = <0x17 0x2>;
interrupt-parent = <&MPIC>;
};
};
* any warranty of any kind, whether express or implied.
*/
+/dts-v1/;
+
/ {
#address-cells = <2>;
#size-cells = <1>;
model = "amcc,katmai";
compatible = "amcc,katmai";
- dcr-parent = <&/cpus/cpu@0>;
+ dcr-parent = <&{/cpus/cpu@0}>;
aliases {
ethernet0 = &EMAC0;
cpu@0 {
device_type = "cpu";
model = "PowerPC,440SPe";
- reg = <0>;
+ reg = <0x00000000>;
clock-frequency = <0>; /* Filled in by zImage */
timebase-frequency = <0>; /* Filled in by zImage */
- i-cache-line-size = <20>;
- d-cache-line-size = <20>;
- i-cache-size = <8000>;
- d-cache-size = <8000>;
+ i-cache-line-size = <32>;
+ d-cache-line-size = <32>;
+ i-cache-size = <32768>;
+ d-cache-size = <32768>;
dcr-controller;
dcr-access-method = "native";
};
memory {
device_type = "memory";
- reg = <0 0 0>; /* Filled in by zImage */
+ reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by zImage */
};
UIC0: interrupt-controller0 {
compatible = "ibm,uic-440spe","ibm,uic";
interrupt-controller;
cell-index = <0>;
- dcr-reg = <0c0 009>;
+ dcr-reg = <0x0c0 0x009>;
#address-cells = <0>;
#size-cells = <0>;
#interrupt-cells = <2>;
compatible = "ibm,uic-440spe","ibm,uic";
interrupt-controller;
cell-index = <1>;
- dcr-reg = <0d0 009>;
+ dcr-reg = <0x0d0 0x009>;
#address-cells = <0>;
#size-cells = <0>;
#interrupt-cells = <2>;
- interrupts = <1e 4 1f 4>; /* cascade */
+ interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
interrupt-parent = <&UIC0>;
};
compatible = "ibm,uic-440spe","ibm,uic";
interrupt-controller;
cell-index = <2>;
- dcr-reg = <0e0 009>;
+ dcr-reg = <0x0e0 0x009>;
#address-cells = <0>;
#size-cells = <0>;
#interrupt-cells = <2>;
- interrupts = <a 4 b 4>; /* cascade */
+ interrupts = <0xa 0x4 0xb 0x4>; /* cascade */
interrupt-parent = <&UIC0>;
};
compatible = "ibm,uic-440spe","ibm,uic";
interrupt-controller;
cell-index = <3>;
- dcr-reg = <0f0 009>;
+ dcr-reg = <0x0f0 0x009>;
#address-cells = <0>;
#size-cells = <0>;
#interrupt-cells = <2>;
- interrupts = <10 4 11 4>; /* cascade */
+ interrupts = <0x10 0x4 0x11 0x4>; /* cascade */
interrupt-parent = <&UIC0>;
};
SDR0: sdr {
compatible = "ibm,sdr-440spe";
- dcr-reg = <00e 002>;
+ dcr-reg = <0x00e 0x002>;
};
CPR0: cpr {
compatible = "ibm,cpr-440spe";
- dcr-reg = <00c 002>;
+ dcr-reg = <0x00c 0x002>;
};
plb {
SDRAM0: sdram {
compatible = "ibm,sdram-440spe", "ibm,sdram-405gp";
- dcr-reg = <010 2>;
+ dcr-reg = <0x010 0x002>;
};
MAL0: mcmal {
compatible = "ibm,mcmal-440spe", "ibm,mcmal2";
- dcr-reg = <180 62>;
+ dcr-reg = <0x180 0x062>;
num-tx-chans = <2>;
num-rx-chans = <1>;
interrupt-parent = <&MAL0>;
- interrupts = <0 1 2 3 4>;
+ interrupts = <0x0 0x1 0x2 0x3 0x4>;
#interrupt-cells = <1>;
#address-cells = <0>;
#size-cells = <0>;
- interrupt-map = </*TXEOB*/ 0 &UIC1 6 4
- /*RXEOB*/ 1 &UIC1 7 4
- /*SERR*/ 2 &UIC1 1 4
- /*TXDE*/ 3 &UIC1 2 4
- /*RXDE*/ 4 &UIC1 3 4>;
+ interrupt-map = </*TXEOB*/ 0x0 &UIC1 0x6 0x4
+ /*RXEOB*/ 0x1 &UIC1 0x7 0x4
+ /*SERR*/ 0x2 &UIC1 0x1 0x4
+ /*TXDE*/ 0x3 &UIC1 0x2 0x4
+ /*RXDE*/ 0x4 &UIC1 0x3 0x4>;
};
POB0: opb {
compatible = "ibm,opb-440spe", "ibm,opb-440gp", "ibm,opb";
#address-cells = <1>;
#size-cells = <1>;
- ranges = <00000000 4 e0000000 20000000>;
+ ranges = <0x00000000 0x00000004 0xe0000000 0x20000000>;
clock-frequency = <0>; /* Filled in by zImage */
EBC0: ebc {
compatible = "ibm,ebc-440spe", "ibm,ebc-440gp", "ibm,ebc";
- dcr-reg = <012 2>;
+ dcr-reg = <0x012 0x002>;
#address-cells = <2>;
#size-cells = <1>;
clock-frequency = <0>; /* Filled in by zImage */
- interrupts = <5 1>;
+ interrupts = <0x5 0x1>;
interrupt-parent = <&UIC1>;
};
UART0: serial@10000200 {
device_type = "serial";
compatible = "ns16550";
- reg = <10000200 8>;
- virtual-reg = <a0000200>;
+ reg = <0x10000200 0x00000008>;
+ virtual-reg = <0xa0000200>;
clock-frequency = <0>; /* Filled in by zImage */
- current-speed = <1c200>;
+ current-speed = <115200>;
interrupt-parent = <&UIC0>;
- interrupts = <0 4>;
+ interrupts = <0x0 0x4>;
};
UART1: serial@10000300 {
device_type = "serial";
compatible = "ns16550";
- reg = <10000300 8>;
- virtual-reg = <a0000300>;
+ reg = <0x10000300 0x00000008>;
+ virtual-reg = <0xa0000300>;
clock-frequency = <0>;
current-speed = <0>;
interrupt-parent = <&UIC0>;
- interrupts = <1 4>;
+ interrupts = <0x1 0x4>;
};
UART2: serial@10000600 {
device_type = "serial";
compatible = "ns16550";
- reg = <10000600 8>;
- virtual-reg = <a0000600>;
+ reg = <0x10000600 0x00000008>;
+ virtual-reg = <0xa0000600>;
clock-frequency = <0>;
current-speed = <0>;
interrupt-parent = <&UIC1>;
- interrupts = <5 4>;
+ interrupts = <0x5 0x4>;
};
IIC0: i2c@10000400 {
compatible = "ibm,iic-440spe", "ibm,iic-440gp", "ibm,iic";
- reg = <10000400 14>;
+ reg = <0x10000400 0x00000014>;
interrupt-parent = <&UIC0>;
- interrupts = <2 4>;
+ interrupts = <0x2 0x4>;
};
IIC1: i2c@10000500 {
compatible = "ibm,iic-440spe", "ibm,iic-440gp", "ibm,iic";
- reg = <10000500 14>;
+ reg = <0x10000500 0x00000014>;
interrupt-parent = <&UIC0>;
- interrupts = <3 4>;
+ interrupts = <0x3 0x4>;
};
EMAC0: ethernet@10000800 {
- linux,network-index = <0>;
+ linux,network-index = <0x0>;
device_type = "network";
compatible = "ibm,emac-440spe", "ibm,emac4";
interrupt-parent = <&UIC1>;
- interrupts = <1c 4 1d 4>;
- reg = <10000800 70>;
+ interrupts = <0x1c 0x4 0x1d 0x4>;
+ reg = <0x10000800 0x00000070>;
local-mac-address = [000000000000];
mal-device = <&MAL0>;
mal-tx-channel = <0>;
mal-rx-channel = <0>;
cell-index = <0>;
- max-frame-size = <2328>;
- rx-fifo-size = <1000>;
- tx-fifo-size = <800>;
+ max-frame-size = <9000>;
+ rx-fifo-size = <4096>;
+ tx-fifo-size = <2048>;
phy-mode = "gmii";
- phy-map = <00000000>;
+ phy-map = <0x00000000>;
has-inverted-stacr-oc;
has-new-stacr-staopc;
};
primary;
large-inbound-windows;
enable-msi-hole;
- reg = <c 0ec00000 8 /* Config space access */
- 0 0 0 /* no IACK cycles */
- c 0ed00000 4 /* Special cycles */
- c 0ec80000 100 /* Internal registers */
- c 0ec80100 fc>; /* Internal messaging registers */
+ reg = <0x0000000c 0x0ec00000 0x00000008 /* Config space access */
+ 0x00000000 0x00000000 0x00000000 /* no IACK cycles */
+ 0x0000000c 0x0ed00000 0x00000004 /* Special cycles */
+ 0x0000000c 0x0ec80000 0x00000100 /* Internal registers */
+ 0x0000000c 0x0ec80100 0x000000fc>; /* Internal messaging registers */
/* Outbound ranges, one memory and one IO,
* later cannot be changed
*/
- ranges = <02000000 0 80000000 0000000d 80000000 0 80000000
- 01000000 0 00000000 0000000c 08000000 0 00010000>;
+ ranges = <0x02000000 0x00000000 0x80000000 0x0000000d 0x80000000 0x00000000 0x80000000
+ 0x01000000 0x00000000 0x00000000 0x0000000c 0x08000000 0x00000000 0x00010000>;
/* Inbound 2GB range starting at 0 */
- dma-ranges = <42000000 0 0 0 0 0 80000000>;
+ dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
/* This drives busses 0 to 0xf */
- bus-range = <0 f>;
+ bus-range = <0x0 0xf>;
/*
* On Katmai, the following PCI-X interrupts signals
* INTC: J2: 1-2
* INTD: J1: 1-2
*/
- interrupt-map-mask = <f800 0 0 7>;
+ interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 1 */
- 0800 0 0 1 &UIC1 14 8
- 0800 0 0 2 &UIC1 13 8
- 0800 0 0 3 &UIC1 12 8
- 0800 0 0 4 &UIC1 11 8
+ 0x800 0x0 0x0 0x1 &UIC1 0x14 0x8
+ 0x800 0x0 0x0 0x2 &UIC1 0x13 0x8
+ 0x800 0x0 0x0 0x3 &UIC1 0x12 0x8
+ 0x800 0x0 0x0 0x4 &UIC1 0x11 0x8
>;
};
#address-cells = <3>;
compatible = "ibm,plb-pciex-440spe", "ibm,plb-pciex";
primary;
- port = <0>; /* port number */
- reg = <d 00000000 20000000 /* Config space access */
- c 10000000 00001000>; /* Registers */
- dcr-reg = <100 020>;
- sdr-base = <300>;
+ port = <0x0>; /* port number */
+ reg = <0x0000000d 0x00000000 0x20000000 /* Config space access */
+ 0x0000000c 0x10000000 0x00001000>; /* Registers */
+ dcr-reg = <0x100 0x020>;
+ sdr-base = <0x300>;
/* Outbound ranges, one memory and one IO,
* later cannot be changed
*/
- ranges = <02000000 0 80000000 0000000e 00000000 0 80000000
- 01000000 0 00000000 0000000f 80000000 0 00010000>;
+ ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x00000000 0x00000000 0x80000000
+ 0x01000000 0x00000000 0x00000000 0x0000000f 0x80000000 0x00000000 0x00010000>;
/* Inbound 2GB range starting at 0 */
- dma-ranges = <42000000 0 0 0 0 0 80000000>;
+ dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
/* This drives busses 10 to 0x1f */
- bus-range = <10 1f>;
+ bus-range = <0x10 0x1f>;
/* Legacy interrupts (note the weird polarity, the bridge seems
* to invert PCIe legacy interrupts).
* below are basically de-swizzled numbers.
* The real slot is on idsel 0, so the swizzling is 1:1
*/
- interrupt-map-mask = <0000 0 0 7>;
+ interrupt-map-mask = <0x0 0x0 0x0 0x7>;
interrupt-map = <
- 0000 0 0 1 &UIC3 0 4 /* swizzled int A */
- 0000 0 0 2 &UIC3 1 4 /* swizzled int B */
- 0000 0 0 3 &UIC3 2 4 /* swizzled int C */
- 0000 0 0 4 &UIC3 3 4 /* swizzled int D */>;
+ 0x0 0x0 0x0 0x1 &UIC3 0x0 0x4 /* swizzled int A */
+ 0x0 0x0 0x0 0x2 &UIC3 0x1 0x4 /* swizzled int B */
+ 0x0 0x0 0x0 0x3 &UIC3 0x2 0x4 /* swizzled int C */
+ 0x0 0x0 0x0 0x4 &UIC3 0x3 0x4 /* swizzled int D */>;
};
PCIE1: pciex@d20000000 {
#address-cells = <3>;
compatible = "ibm,plb-pciex-440spe", "ibm,plb-pciex";
primary;
- port = <1>; /* port number */
- reg = <d 20000000 20000000 /* Config space access */
- c 10001000 00001000>; /* Registers */
- dcr-reg = <120 020>;
- sdr-base = <340>;
+ port = <0x1>; /* port number */
+ reg = <0x0000000d 0x20000000 0x20000000 /* Config space access */
+ 0x0000000c 0x10001000 0x00001000>; /* Registers */
+ dcr-reg = <0x120 0x020>;
+ sdr-base = <0x340>;
/* Outbound ranges, one memory and one IO,
* later cannot be changed
*/
- ranges = <02000000 0 80000000 0000000e 80000000 0 80000000
- 01000000 0 00000000 0000000f 80010000 0 00010000>;
+ ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x80000000 0x00000000 0x80000000
+ 0x01000000 0x00000000 0x00000000 0x0000000f 0x80010000 0x00000000 0x00010000>;
/* Inbound 2GB range starting at 0 */
- dma-ranges = <42000000 0 0 0 0 0 80000000>;
+ dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
/* This drives busses 10 to 0x1f */
- bus-range = <20 2f>;
+ bus-range = <0x20 0x2f>;
/* Legacy interrupts (note the weird polarity, the bridge seems
* to invert PCIe legacy interrupts).
* below are basically de-swizzled numbers.
* The real slot is on idsel 0, so the swizzling is 1:1
*/
- interrupt-map-mask = <0000 0 0 7>;
+ interrupt-map-mask = <0x0 0x0 0x0 0x7>;
interrupt-map = <
- 0000 0 0 1 &UIC3 4 4 /* swizzled int A */
- 0000 0 0 2 &UIC3 5 4 /* swizzled int B */
- 0000 0 0 3 &UIC3 6 4 /* swizzled int C */
- 0000 0 0 4 &UIC3 7 4 /* swizzled int D */>;
+ 0x0 0x0 0x0 0x1 &UIC3 0x4 0x4 /* swizzled int A */
+ 0x0 0x0 0x0 0x2 &UIC3 0x5 0x4 /* swizzled int B */
+ 0x0 0x0 0x0 0x3 &UIC3 0x6 0x4 /* swizzled int C */
+ 0x0 0x0 0x0 0x4 &UIC3 0x7 0x4 /* swizzled int D */>;
};
PCIE2: pciex@d40000000 {
#address-cells = <3>;
compatible = "ibm,plb-pciex-440spe", "ibm,plb-pciex";
primary;
- port = <2>; /* port number */
- reg = <d 40000000 20000000 /* Config space access */
- c 10002000 00001000>; /* Registers */
- dcr-reg = <140 020>;
- sdr-base = <370>;
+ port = <0x2>; /* port number */
+ reg = <0x0000000d 0x40000000 0x20000000 /* Config space access */
+ 0x0000000c 0x10002000 0x00001000>; /* Registers */
+ dcr-reg = <0x140 0x020>;
+ sdr-base = <0x370>;
/* Outbound ranges, one memory and one IO,
* later cannot be changed
*/
- ranges = <02000000 0 80000000 0000000f 00000000 0 80000000
- 01000000 0 00000000 0000000f 80020000 0 00010000>;
+ ranges = <0x02000000 0x00000000 0x80000000 0x0000000f 0x00000000 0x00000000 0x80000000
+ 0x01000000 0x00000000 0x00000000 0x0000000f 0x80020000 0x00000000 0x00010000>;
/* Inbound 2GB range starting at 0 */
- dma-ranges = <42000000 0 0 0 0 0 80000000>;
+ dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
/* This drives busses 10 to 0x1f */
- bus-range = <30 3f>;
+ bus-range = <0x30 0x3f>;
/* Legacy interrupts (note the weird polarity, the bridge seems
* to invert PCIe legacy interrupts).
* below are basically de-swizzled numbers.
* The real slot is on idsel 0, so the swizzling is 1:1
*/
- interrupt-map-mask = <0000 0 0 7>;
+ interrupt-map-mask = <0x0 0x0 0x0 0x7>;
interrupt-map = <
- 0000 0 0 1 &UIC3 8 4 /* swizzled int A */
- 0000 0 0 2 &UIC3 9 4 /* swizzled int B */
- 0000 0 0 3 &UIC3 a 4 /* swizzled int C */
- 0000 0 0 4 &UIC3 b 4 /* swizzled int D */>;
+ 0x0 0x0 0x0 0x1 &UIC3 0x8 0x4 /* swizzled int A */
+ 0x0 0x0 0x0 0x2 &UIC3 0x9 0x4 /* swizzled int B */
+ 0x0 0x0 0x0 0x3 &UIC3 0xa 0x4 /* swizzled int C */
+ 0x0 0x0 0x0 0x4 &UIC3 0xb 0x4 /* swizzled int D */>;
};
};
* any warranty of any kind, whether express or implied.
*/
+/dts-v1/;
+
/ {
#address-cells = <1>;
#size-cells = <1>;
model = "amcc,kilauea";
compatible = "amcc,kilauea";
- dcr-parent = <&/cpus/cpu@0>;
+ dcr-parent = <&{/cpus/cpu@0}>;
aliases {
ethernet0 = &EMAC0;
cpu@0 {
device_type = "cpu";
model = "PowerPC,405EX";
- reg = <0>;
+ reg = <0x00000000>;
clock-frequency = <0>; /* Filled in by U-Boot */
timebase-frequency = <0>; /* Filled in by U-Boot */
- i-cache-line-size = <20>;
- d-cache-line-size = <20>;
- i-cache-size = <4000>; /* 16 kB */
- d-cache-size = <4000>; /* 16 kB */
+ i-cache-line-size = <32>;
+ d-cache-line-size = <32>;
+ i-cache-size = <16384>; /* 16 kB */
+ d-cache-size = <16384>; /* 16 kB */
dcr-controller;
dcr-access-method = "native";
};
memory {
device_type = "memory";
- reg = <0 0>; /* Filled in by U-Boot */
+ reg = <0x00000000 0x00000000>; /* Filled in by U-Boot */
};
UIC0: interrupt-controller {
compatible = "ibm,uic-405ex", "ibm,uic";
interrupt-controller;
cell-index = <0>;
- dcr-reg = <0c0 009>;
+ dcr-reg = <0x0c0 0x009>;
#address-cells = <0>;
#size-cells = <0>;
#interrupt-cells = <2>;
compatible = "ibm,uic-405ex","ibm,uic";
interrupt-controller;
cell-index = <1>;
- dcr-reg = <0d0 009>;
+ dcr-reg = <0x0d0 0x009>;
#address-cells = <0>;
#size-cells = <0>;
#interrupt-cells = <2>;
- interrupts = <1e 4 1f 4>; /* cascade */
+ interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
interrupt-parent = <&UIC0>;
};
compatible = "ibm,uic-405ex","ibm,uic";
interrupt-controller;
cell-index = <2>;
- dcr-reg = <0e0 009>;
+ dcr-reg = <0x0e0 0x009>;
#address-cells = <0>;
#size-cells = <0>;
#interrupt-cells = <2>;
- interrupts = <1c 4 1d 4>; /* cascade */
+ interrupts = <0x1c 0x4 0x1d 0x4>; /* cascade */
interrupt-parent = <&UIC0>;
};
SDRAM0: memory-controller {
compatible = "ibm,sdram-405ex";
- dcr-reg = <010 2>;
+ dcr-reg = <0x010 0x002>;
};
MAL0: mcmal {
compatible = "ibm,mcmal-405ex", "ibm,mcmal2";
- dcr-reg = <180 62>;
+ dcr-reg = <0x180 0x062>;
num-tx-chans = <2>;
num-rx-chans = <2>;
interrupt-parent = <&MAL0>;
- interrupts = <0 1 2 3 4>;
+ interrupts = <0x0 0x1 0x2 0x3 0x4>;
#interrupt-cells = <1>;
#address-cells = <0>;
#size-cells = <0>;
- interrupt-map = </*TXEOB*/ 0 &UIC0 a 4
- /*RXEOB*/ 1 &UIC0 b 4
- /*SERR*/ 2 &UIC1 0 4
- /*TXDE*/ 3 &UIC1 1 4
- /*RXDE*/ 4 &UIC1 2 4>;
- interrupt-map-mask = <ffffffff>;
+ interrupt-map = </*TXEOB*/ 0x0 &UIC0 0xa 0x4
+ /*RXEOB*/ 0x1 &UIC0 0xb 0x4
+ /*SERR*/ 0x2 &UIC1 0x0 0x4
+ /*TXDE*/ 0x3 &UIC1 0x1 0x4
+ /*RXDE*/ 0x4 &UIC1 0x2 0x4>;
+ interrupt-map-mask = <0xffffffff>;
};
POB0: opb {
compatible = "ibm,opb-405ex", "ibm,opb";
#address-cells = <1>;
#size-cells = <1>;
- ranges = <80000000 80000000 10000000
- ef600000 ef600000 a00000
- f0000000 f0000000 10000000>;
- dcr-reg = <0a0 5>;
+ ranges = <0x80000000 0x80000000 0x10000000
+ 0xef600000 0xef600000 0x00a00000
+ 0xf0000000 0xf0000000 0x10000000>;
+ dcr-reg = <0x0a0 0x005>;
clock-frequency = <0>; /* Filled in by U-Boot */
EBC0: ebc {
compatible = "ibm,ebc-405ex", "ibm,ebc";
- dcr-reg = <012 2>;
+ dcr-reg = <0x012 0x002>;
#address-cells = <2>;
#size-cells = <1>;
clock-frequency = <0>; /* Filled in by U-Boot */
/* ranges property is supplied by U-Boot */
- interrupts = <5 1>;
+ interrupts = <0x5 0x1>;
interrupt-parent = <&UIC1>;
nor_flash@0,0 {
compatible = "amd,s29gl512n", "cfi-flash";
bank-width = <2>;
- reg = <0 000000 4000000>;
+ reg = <0x00000000 0x00000000 0x04000000>;
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "kernel";
- reg = <0 200000>;
+ reg = <0x00000000 0x00200000>;
};
partition@200000 {
label = "root";
- reg = <200000 200000>;
+ reg = <0x00200000 0x00200000>;
};
partition@400000 {
label = "user";
- reg = <400000 3b60000>;
+ reg = <0x00400000 0x03b60000>;
};
partition@3f60000 {
label = "env";
- reg = <3f60000 40000>;
+ reg = <0x03f60000 0x00040000>;
};
partition@3fa0000 {
label = "u-boot";
- reg = <3fa0000 60000>;
+ reg = <0x03fa0000 0x00060000>;
};
};
};
UART0: serial@ef600200 {
device_type = "serial";
compatible = "ns16550";
- reg = <ef600200 8>;
- virtual-reg = <ef600200>;
+ reg = <0xef600200 0x00000008>;
+ virtual-reg = <0xef600200>;
clock-frequency = <0>; /* Filled in by U-Boot */
current-speed = <0>;
interrupt-parent = <&UIC0>;
- interrupts = <1a 4>;
+ interrupts = <0x1a 0x4>;
};
UART1: serial@ef600300 {
device_type = "serial";
compatible = "ns16550";
- reg = <ef600300 8>;
- virtual-reg = <ef600300>;
+ reg = <0xef600300 0x00000008>;
+ virtual-reg = <0xef600300>;
clock-frequency = <0>; /* Filled in by U-Boot */
current-speed = <0>;
interrupt-parent = <&UIC0>;
- interrupts = <1 4>;
+ interrupts = <0x1 0x4>;
};
IIC0: i2c@ef600400 {
compatible = "ibm,iic-405ex", "ibm,iic";
- reg = <ef600400 14>;
+ reg = <0xef600400 0x00000014>;
interrupt-parent = <&UIC0>;
- interrupts = <2 4>;
+ interrupts = <0x2 0x4>;
};
IIC1: i2c@ef600500 {
compatible = "ibm,iic-405ex", "ibm,iic";
- reg = <ef600500 14>;
+ reg = <0xef600500 0x00000014>;
interrupt-parent = <&UIC0>;
- interrupts = <7 4>;
+ interrupts = <0x7 0x4>;
};
RGMII0: emac-rgmii@ef600b00 {
compatible = "ibm,rgmii-405ex", "ibm,rgmii";
- reg = <ef600b00 104>;
+ reg = <0xef600b00 0x00000104>;
has-mdio;
};
EMAC0: ethernet@ef600900 {
- linux,network-index = <0>;
+ linux,network-index = <0x0>;
device_type = "network";
compatible = "ibm,emac-405ex", "ibm,emac4";
interrupt-parent = <&EMAC0>;
- interrupts = <0 1>;
+ interrupts = <0x0 0x1>;
#interrupt-cells = <1>;
#address-cells = <0>;
#size-cells = <0>;
- interrupt-map = </*Status*/ 0 &UIC0 18 4
- /*Wake*/ 1 &UIC1 1d 4>;
- reg = <ef600900 70>;
+ interrupt-map = </*Status*/ 0x0 &UIC0 0x18 0x4
+ /*Wake*/ 0x1 &UIC1 0x1d 0x4>;
+ reg = <0xef600900 0x00000070>;
local-mac-address = [000000000000]; /* Filled in by U-Boot */
mal-device = <&MAL0>;
mal-tx-channel = <0>;
mal-rx-channel = <0>;
cell-index = <0>;
- max-frame-size = <2328>;
- rx-fifo-size = <1000>;
- tx-fifo-size = <800>;
+ max-frame-size = <9000>;
+ rx-fifo-size = <4096>;
+ tx-fifo-size = <2048>;
phy-mode = "rgmii";
- phy-map = <00000000>;
+ phy-map = <0x00000000>;
rgmii-device = <&RGMII0>;
rgmii-channel = <0>;
has-inverted-stacr-oc;
};
EMAC1: ethernet@ef600a00 {
- linux,network-index = <1>;
+ linux,network-index = <0x1>;
device_type = "network";
compatible = "ibm,emac-405ex", "ibm,emac4";
interrupt-parent = <&EMAC1>;
- interrupts = <0 1>;
+ interrupts = <0x0 0x1>;
#interrupt-cells = <1>;
#address-cells = <0>;
#size-cells = <0>;
- interrupt-map = </*Status*/ 0 &UIC0 19 4
- /*Wake*/ 1 &UIC1 1f 4>;
- reg = <ef600a00 70>;
+ interrupt-map = </*Status*/ 0x0 &UIC0 0x19 0x4
+ /*Wake*/ 0x1 &UIC1 0x1f 0x4>;
+ reg = <0xef600a00 0x00000070>;
local-mac-address = [000000000000]; /* Filled in by U-Boot */
mal-device = <&MAL0>;
mal-tx-channel = <1>;
mal-rx-channel = <1>;
cell-index = <1>;
- max-frame-size = <2328>;
- rx-fifo-size = <1000>;
- tx-fifo-size = <800>;
+ max-frame-size = <9000>;
+ rx-fifo-size = <4096>;
+ tx-fifo-size = <2048>;
phy-mode = "rgmii";
- phy-map = <00000000>;
+ phy-map = <0x00000000>;
rgmii-device = <&RGMII0>;
rgmii-channel = <1>;
has-inverted-stacr-oc;
#address-cells = <3>;
compatible = "ibm,plb-pciex-405ex", "ibm,plb-pciex";
primary;
- port = <0>; /* port number */
- reg = <a0000000 20000000 /* Config space access */
- ef000000 00001000>; /* Registers */
- dcr-reg = <040 020>;
- sdr-base = <400>;
+ port = <0x0>; /* port number */
+ reg = <0xa0000000 0x20000000 /* Config space access */
+ 0xef000000 0x00001000>; /* Registers */
+ dcr-reg = <0x040 0x020>;
+ sdr-base = <0x400>;
/* Outbound ranges, one memory and one IO,
* later cannot be changed
*/
- ranges = <02000000 0 80000000 90000000 0 08000000
- 01000000 0 00000000 e0000000 0 00010000>;
+ ranges = <0x02000000 0x00000000 0x80000000 0x90000000 0x00000000 0x08000000
+ 0x01000000 0x00000000 0x00000000 0xe0000000 0x00000000 0x00010000>;
/* Inbound 2GB range starting at 0 */
- dma-ranges = <42000000 0 0 0 0 80000000>;
+ dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x80000000>;
/* This drives busses 0x00 to 0x3f */
- bus-range = <00 3f>;
+ bus-range = <0x0 0x3f>;
/* Legacy interrupts (note the weird polarity, the bridge seems
* to invert PCIe legacy interrupts).
* below are basically de-swizzled numbers.
* The real slot is on idsel 0, so the swizzling is 1:1
*/
- interrupt-map-mask = <0000 0 0 7>;
+ interrupt-map-mask = <0x0 0x0 0x0 0x7>;
interrupt-map = <
- 0000 0 0 1 &UIC2 0 4 /* swizzled int A */
- 0000 0 0 2 &UIC2 1 4 /* swizzled int B */
- 0000 0 0 3 &UIC2 2 4 /* swizzled int C */
- 0000 0 0 4 &UIC2 3 4 /* swizzled int D */>;
+ 0x0 0x0 0x0 0x1 &UIC2 0x0 0x4 /* swizzled int A */
+ 0x0 0x0 0x0 0x2 &UIC2 0x1 0x4 /* swizzled int B */
+ 0x0 0x0 0x0 0x3 &UIC2 0x2 0x4 /* swizzled int C */
+ 0x0 0x0 0x0 0x4 &UIC2 0x3 0x4 /* swizzled int D */>;
};
PCIE1: pciex@0c0000000 {
#address-cells = <3>;
compatible = "ibm,plb-pciex-405ex", "ibm,plb-pciex";
primary;
- port = <1>; /* port number */
- reg = <c0000000 20000000 /* Config space access */
- ef001000 00001000>; /* Registers */
- dcr-reg = <060 020>;
- sdr-base = <440>;
+ port = <0x1>; /* port number */
+ reg = <0xc0000000 0x20000000 /* Config space access */
+ 0xef001000 0x00001000>; /* Registers */
+ dcr-reg = <0x060 0x020>;
+ sdr-base = <0x440>;
/* Outbound ranges, one memory and one IO,
* later cannot be changed
*/
- ranges = <02000000 0 80000000 98000000 0 08000000
- 01000000 0 00000000 e0010000 0 00010000>;
+ ranges = <0x02000000 0x00000000 0x80000000 0x98000000 0x00000000 0x08000000
+ 0x01000000 0x00000000 0x00000000 0xe0010000 0x00000000 0x00010000>;
/* Inbound 2GB range starting at 0 */
- dma-ranges = <42000000 0 0 0 0 80000000>;
+ dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x80000000>;
/* This drives busses 0x40 to 0x7f */
- bus-range = <40 7f>;
+ bus-range = <0x40 0x7f>;
/* Legacy interrupts (note the weird polarity, the bridge seems
* to invert PCIe legacy interrupts).
* below are basically de-swizzled numbers.
* The real slot is on idsel 0, so the swizzling is 1:1
*/
- interrupt-map-mask = <0000 0 0 7>;
+ interrupt-map-mask = <0x0 0x0 0x0 0x7>;
interrupt-map = <
- 0000 0 0 1 &UIC2 b 4 /* swizzled int A */
- 0000 0 0 2 &UIC2 c 4 /* swizzled int B */
- 0000 0 0 3 &UIC2 d 4 /* swizzled int C */
- 0000 0 0 4 &UIC2 e 4 /* swizzled int D */>;
+ 0x0 0x0 0x0 0x1 &UIC2 0xb 0x4 /* swizzled int A */
+ 0x0 0x0 0x0 0x2 &UIC2 0xc 0x4 /* swizzled int B */
+ 0x0 0x0 0x0 0x3 &UIC2 0xd 0x4 /* swizzled int C */
+ 0x0 0x0 0x0 0x4 &UIC2 0xe 0x4 /* swizzled int D */>;
};
};
};
timebase-frequency = <0>; /* From U-boot */
bus-frequency = <0>; /* From U-boot */
clock-frequency = <0>; /* From U-boot */
+ next-level-cache = <&L2>;
};
};
interrupts = <0x12 0x2>;
};
- l2-cache-controller@20000 {
+ L2: l2-cache-controller@20000 {
compatible = "fsl,8540-l2-cache-controller";
reg = <0x20000 0x1000>;
cache-line-size = <0x20>; /* 32 bytes */
* any warranty of any kind, whether express or implied.
*/
+/dts-v1/;
+
/ {
#address-cells = <1>;
#size-cells = <1>;
model = "amcc,makalu";
compatible = "amcc,makalu";
- dcr-parent = <&/cpus/cpu@0>;
+ dcr-parent = <&{/cpus/cpu@0}>;
aliases {
ethernet0 = &EMAC0;
cpu@0 {
device_type = "cpu";
model = "PowerPC,405EX";
- reg = <0>;
+ reg = <0x00000000>;
clock-frequency = <0>; /* Filled in by U-Boot */
timebase-frequency = <0>; /* Filled in by U-Boot */
- i-cache-line-size = <20>;
- d-cache-line-size = <20>;
- i-cache-size = <4000>; /* 16 kB */
- d-cache-size = <4000>; /* 16 kB */
+ i-cache-line-size = <32>;
+ d-cache-line-size = <32>;
+ i-cache-size = <16384>; /* 16 kB */
+ d-cache-size = <16384>; /* 16 kB */
dcr-controller;
dcr-access-method = "native";
};
memory {
device_type = "memory";
- reg = <0 0>; /* Filled in by U-Boot */
+ reg = <0x00000000 0x00000000>; /* Filled in by U-Boot */
};
UIC0: interrupt-controller {
compatible = "ibm,uic-405ex", "ibm,uic";
interrupt-controller;
cell-index = <0>;
- dcr-reg = <0c0 009>;
+ dcr-reg = <0x0c0 0x009>;
#address-cells = <0>;
#size-cells = <0>;
#interrupt-cells = <2>;
compatible = "ibm,uic-405ex","ibm,uic";
interrupt-controller;
cell-index = <1>;
- dcr-reg = <0d0 009>;
+ dcr-reg = <0x0d0 0x009>;
#address-cells = <0>;
#size-cells = <0>;
#interrupt-cells = <2>;
- interrupts = <1e 4 1f 4>; /* cascade */
+ interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
interrupt-parent = <&UIC0>;
};
compatible = "ibm,uic-405ex","ibm,uic";
interrupt-controller;
cell-index = <2>;
- dcr-reg = <0e0 009>;
+ dcr-reg = <0x0e0 0x009>;
#address-cells = <0>;
#size-cells = <0>;
#interrupt-cells = <2>;
- interrupts = <1c 4 1d 4>; /* cascade */
+ interrupts = <0x1c 0x4 0x1d 0x4>; /* cascade */
interrupt-parent = <&UIC0>;
};
SDRAM0: memory-controller {
compatible = "ibm,sdram-405ex";
- dcr-reg = <010 2>;
+ dcr-reg = <0x010 0x002>;
};
MAL0: mcmal {
compatible = "ibm,mcmal-405ex", "ibm,mcmal2";
- dcr-reg = <180 62>;
+ dcr-reg = <0x180 0x062>;
num-tx-chans = <2>;
num-rx-chans = <2>;
interrupt-parent = <&MAL0>;
- interrupts = <0 1 2 3 4>;
+ interrupts = <0x0 0x1 0x2 0x3 0x4>;
#interrupt-cells = <1>;
#address-cells = <0>;
#size-cells = <0>;
- interrupt-map = </*TXEOB*/ 0 &UIC0 a 4
- /*RXEOB*/ 1 &UIC0 b 4
- /*SERR*/ 2 &UIC1 0 4
- /*TXDE*/ 3 &UIC1 1 4
- /*RXDE*/ 4 &UIC1 2 4>;
- interrupt-map-mask = <ffffffff>;
+ interrupt-map = </*TXEOB*/ 0x0 &UIC0 0xa 0x4
+ /*RXEOB*/ 0x1 &UIC0 0xb 0x4
+ /*SERR*/ 0x2 &UIC1 0x0 0x4
+ /*TXDE*/ 0x3 &UIC1 0x1 0x4
+ /*RXDE*/ 0x4 &UIC1 0x2 0x4>;
+ interrupt-map-mask = <0xffffffff>;
};
POB0: opb {
compatible = "ibm,opb-405ex", "ibm,opb";
#address-cells = <1>;
#size-cells = <1>;
- ranges = <80000000 80000000 10000000
- ef600000 ef600000 a00000
- f0000000 f0000000 10000000>;
- dcr-reg = <0a0 5>;
+ ranges = <0x80000000 0x80000000 0x10000000
+ 0xef600000 0xef600000 0x00a00000
+ 0xf0000000 0xf0000000 0x10000000>;
+ dcr-reg = <0x0a0 0x005>;
clock-frequency = <0>; /* Filled in by U-Boot */
EBC0: ebc {
compatible = "ibm,ebc-405ex", "ibm,ebc";
- dcr-reg = <012 2>;
+ dcr-reg = <0x012 0x002>;
#address-cells = <2>;
#size-cells = <1>;
clock-frequency = <0>; /* Filled in by U-Boot */
/* ranges property is supplied by U-Boot */
- interrupts = <5 1>;
+ interrupts = <0x5 0x1>;
interrupt-parent = <&UIC1>;
nor_flash@0,0 {
compatible = "amd,s29gl512n", "cfi-flash";
bank-width = <2>;
- reg = <0 000000 4000000>;
+ reg = <0x00000000 0x00000000 0x04000000>;
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "kernel";
- reg = <0 200000>;
+ reg = <0x00000000 0x00200000>;
};
partition@200000 {
label = "root";
- reg = <200000 200000>;
+ reg = <0x00200000 0x00200000>;
};
partition@400000 {
label = "user";
- reg = <400000 3b60000>;
+ reg = <0x00400000 0x03b60000>;
};
partition@3f60000 {
label = "env";
- reg = <3f60000 40000>;
+ reg = <0x03f60000 0x00040000>;
};
partition@3fa0000 {
label = "u-boot";
- reg = <3fa0000 60000>;
+ reg = <0x03fa0000 0x00060000>;
};
};
};
UART0: serial@ef600200 {
device_type = "serial";
compatible = "ns16550";
- reg = <ef600200 8>;
- virtual-reg = <ef600200>;
+ reg = <0xef600200 0x00000008>;
+ virtual-reg = <0xef600200>;
clock-frequency = <0>; /* Filled in by U-Boot */
current-speed = <0>;
interrupt-parent = <&UIC0>;
- interrupts = <1a 4>;
+ interrupts = <0x1a 0x4>;
};
UART1: serial@ef600300 {
device_type = "serial";
compatible = "ns16550";
- reg = <ef600300 8>;
- virtual-reg = <ef600300>;
+ reg = <0xef600300 0x00000008>;
+ virtual-reg = <0xef600300>;
clock-frequency = <0>; /* Filled in by U-Boot */
current-speed = <0>;
interrupt-parent = <&UIC0>;
- interrupts = <1 4>;
+ interrupts = <0x1 0x4>;
};
IIC0: i2c@ef600400 {
compatible = "ibm,iic-405ex", "ibm,iic";
- reg = <ef600400 14>;
+ reg = <0xef600400 0x00000014>;
interrupt-parent = <&UIC0>;
- interrupts = <2 4>;
+ interrupts = <0x2 0x4>;
};
IIC1: i2c@ef600500 {
compatible = "ibm,iic-405ex", "ibm,iic";
- reg = <ef600500 14>;
+ reg = <0xef600500 0x00000014>;
interrupt-parent = <&UIC0>;
- interrupts = <7 4>;
+ interrupts = <0x7 0x4>;
};
RGMII0: emac-rgmii@ef600b00 {
compatible = "ibm,rgmii-405ex", "ibm,rgmii";
- reg = <ef600b00 104>;
+ reg = <0xef600b00 0x00000104>;
has-mdio;
};
EMAC0: ethernet@ef600900 {
- linux,network-index = <0>;
+ linux,network-index = <0x0>;
device_type = "network";
compatible = "ibm,emac-405ex", "ibm,emac4";
interrupt-parent = <&EMAC0>;
- interrupts = <0 1>;
+ interrupts = <0x0 0x1>;
#interrupt-cells = <1>;
#address-cells = <0>;
#size-cells = <0>;
- interrupt-map = </*Status*/ 0 &UIC0 18 4
- /*Wake*/ 1 &UIC1 1d 4>;
- reg = <ef600900 70>;
+ interrupt-map = </*Status*/ 0x0 &UIC0 0x18 0x4
+ /*Wake*/ 0x1 &UIC1 0x1d 0x4>;
+ reg = <0xef600900 0x00000070>;
local-mac-address = [000000000000]; /* Filled in by U-Boot */
mal-device = <&MAL0>;
mal-tx-channel = <0>;
mal-rx-channel = <0>;
cell-index = <0>;
- max-frame-size = <2328>;
- rx-fifo-size = <1000>;
- tx-fifo-size = <800>;
+ max-frame-size = <9000>;
+ rx-fifo-size = <4096>;
+ tx-fifo-size = <2048>;
phy-mode = "rgmii";
- phy-map = <0000003f>; /* Start at 6 */
+ phy-map = <0x0000003f>; /* Start at 6 */
rgmii-device = <&RGMII0>;
rgmii-channel = <0>;
has-inverted-stacr-oc;
};
EMAC1: ethernet@ef600a00 {
- linux,network-index = <1>;
+ linux,network-index = <0x1>;
device_type = "network";
compatible = "ibm,emac-405ex", "ibm,emac4";
interrupt-parent = <&EMAC1>;
- interrupts = <0 1>;
+ interrupts = <0x0 0x1>;
#interrupt-cells = <1>;
#address-cells = <0>;
#size-cells = <0>;
- interrupt-map = </*Status*/ 0 &UIC0 19 4
- /*Wake*/ 1 &UIC1 1f 4>;
- reg = <ef600a00 70>;
+ interrupt-map = </*Status*/ 0x0 &UIC0 0x19 0x4
+ /*Wake*/ 0x1 &UIC1 0x1f 0x4>;
+ reg = <0xef600a00 0x00000070>;
local-mac-address = [000000000000]; /* Filled in by U-Boot */
mal-device = <&MAL0>;
mal-tx-channel = <1>;
mal-rx-channel = <1>;
cell-index = <1>;
- max-frame-size = <2328>;
- rx-fifo-size = <1000>;
- tx-fifo-size = <800>;
+ max-frame-size = <9000>;
+ rx-fifo-size = <4096>;
+ tx-fifo-size = <2048>;
phy-mode = "rgmii";
- phy-map = <00000000>;
+ phy-map = <0x00000000>;
rgmii-device = <&RGMII0>;
rgmii-channel = <1>;
has-inverted-stacr-oc;
#address-cells = <3>;
compatible = "ibm,plb-pciex-405ex", "ibm,plb-pciex";
primary;
- port = <0>; /* port number */
- reg = <a0000000 20000000 /* Config space access */
- ef000000 00001000>; /* Registers */
- dcr-reg = <040 020>;
- sdr-base = <400>;
+ port = <0x0>; /* port number */
+ reg = <0xa0000000 0x20000000 /* Config space access */
+ 0xef000000 0x00001000>; /* Registers */
+ dcr-reg = <0x040 0x020>;
+ sdr-base = <0x400>;
/* Outbound ranges, one memory and one IO,
* later cannot be changed
*/
- ranges = <02000000 0 80000000 90000000 0 08000000
- 01000000 0 00000000 e0000000 0 00010000>;
+ ranges = <0x02000000 0x00000000 0x80000000 0x90000000 0x00000000 0x08000000
+ 0x01000000 0x00000000 0x00000000 0xe0000000 0x00000000 0x00010000>;
/* Inbound 2GB range starting at 0 */
- dma-ranges = <42000000 0 0 0 0 80000000>;
+ dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x80000000>;
/* This drives busses 0x00 to 0x3f */
- bus-range = <00 3f>;
+ bus-range = <0x0 0x3f>;
/* Legacy interrupts (note the weird polarity, the bridge seems
* to invert PCIe legacy interrupts).
* below are basically de-swizzled numbers.
* The real slot is on idsel 0, so the swizzling is 1:1
*/
- interrupt-map-mask = <0000 0 0 7>;
+ interrupt-map-mask = <0x0 0x0 0x0 0x7>;
interrupt-map = <
- 0000 0 0 1 &UIC2 0 4 /* swizzled int A */
- 0000 0 0 2 &UIC2 1 4 /* swizzled int B */
- 0000 0 0 3 &UIC2 2 4 /* swizzled int C */
- 0000 0 0 4 &UIC2 3 4 /* swizzled int D */>;
+ 0x0 0x0 0x0 0x1 &UIC2 0x0 0x4 /* swizzled int A */
+ 0x0 0x0 0x0 0x2 &UIC2 0x1 0x4 /* swizzled int B */
+ 0x0 0x0 0x0 0x3 &UIC2 0x2 0x4 /* swizzled int C */
+ 0x0 0x0 0x0 0x4 &UIC2 0x3 0x4 /* swizzled int D */>;
};
PCIE1: pciex@0c0000000 {
#address-cells = <3>;
compatible = "ibm,plb-pciex-405ex", "ibm,plb-pciex";
primary;
- port = <1>; /* port number */
- reg = <c0000000 20000000 /* Config space access */
- ef001000 00001000>; /* Registers */
- dcr-reg = <060 020>;
- sdr-base = <440>;
+ port = <0x1>; /* port number */
+ reg = <0xc0000000 0x20000000 /* Config space access */
+ 0xef001000 0x00001000>; /* Registers */
+ dcr-reg = <0x060 0x020>;
+ sdr-base = <0x440>;
/* Outbound ranges, one memory and one IO,
* later cannot be changed
*/
- ranges = <02000000 0 80000000 98000000 0 08000000
- 01000000 0 00000000 e0010000 0 00010000>;
+ ranges = <0x02000000 0x00000000 0x80000000 0x98000000 0x00000000 0x08000000
+ 0x01000000 0x00000000 0x00000000 0xe0010000 0x00000000 0x00010000>;
/* Inbound 2GB range starting at 0 */
- dma-ranges = <42000000 0 0 0 0 80000000>;
+ dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x80000000>;
/* This drives busses 0x40 to 0x7f */
- bus-range = <40 7f>;
+ bus-range = <0x40 0x7f>;
/* Legacy interrupts (note the weird polarity, the bridge seems
* to invert PCIe legacy interrupts).
* below are basically de-swizzled numbers.
* The real slot is on idsel 0, so the swizzling is 1:1
*/
- interrupt-map-mask = <0000 0 0 7>;
+ interrupt-map-mask = <0x0 0x0 0x0 0x7>;
interrupt-map = <
- 0000 0 0 1 &UIC2 b 4 /* swizzled int A */
- 0000 0 0 2 &UIC2 c 4 /* swizzled int B */
- 0000 0 0 3 &UIC2 d 4 /* swizzled int C */
- 0000 0 0 4 &UIC2 e 4 /* swizzled int D */>;
+ 0x0 0x0 0x0 0x1 &UIC2 0xb 0x4 /* swizzled int A */
+ 0x0 0x0 0x0 0x2 &UIC2 0xc 0x4 /* swizzled int B */
+ 0x0 0x0 0x0 0x3 &UIC2 0xd 0x4 /* swizzled int C */
+ 0x0 0x0 0x0 0x4 &UIC2 0xe 0x4 /* swizzled int D */>;
};
};
};
};
mpic: pic@7400 {
- clock-frequency = <0>;
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <2>;
reg = <0x7400 0x400>;
compatible = "chrp,open-pic";
device_type = "open-pic";
- big-endian;
};
pci@1000 {
compatible = "tsi108-pci";
timebase-frequency = <0>; // 33 MHz, from uboot
bus-frequency = <0>; // 166 MHz
clock-frequency = <0>; // 825 MHz, from uboot
+ next-level-cache = <&L2>;
};
};
interrupts = <18 2>;
};
- l2-cache-controller@20000 {
+ L2: l2-cache-controller@20000 {
compatible = "fsl,8540-l2-cache-controller";
reg = <0x20000 0x1000>;
cache-line-size = <32>; // 32 bytes
interrupt-parent = <&mpic>;
};
mpic: pic@40000 {
- clock-frequency = <0>;
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <2>;
reg = <0x40000 0x40000>;
compatible = "chrp,open-pic";
device_type = "open-pic";
- big-endian;
};
};
timebase-frequency = <0>; // 33 MHz, from uboot
bus-frequency = <0>; // 166 MHz
clock-frequency = <0>; // 825 MHz, from uboot
+ next-level-cache = <&L2>;
};
};
interrupts = <18 2>;
};
- l2-cache-controller@20000 {
+ L2: l2-cache-controller@20000 {
compatible = "fsl,8541-l2-cache-controller";
reg = <0x20000 0x1000>;
cache-line-size = <32>; // 32 bytes
};
mpic: pic@40000 {
- clock-frequency = <0>;
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <2>;
reg = <0x40000 0x40000>;
compatible = "chrp,open-pic";
device_type = "open-pic";
- big-endian;
};
cpm@919c0 {
timebase-frequency = <0>;
bus-frequency = <0>;
clock-frequency = <0>;
+ next-level-cache = <&L2>;
};
};
interrupts = <18 2>;
};
- l2-cache-controller@20000 {
+ L2: l2-cache-controller@20000 {
compatible = "fsl,8544-l2-cache-controller";
reg = <0x20000 0x1000>;
cache-line-size = <32>; // 32 bytes
};
mpic: pic@40000 {
- clock-frequency = <0>;
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <2>;
reg = <0x40000 0x40000>;
compatible = "chrp,open-pic";
device_type = "open-pic";
- big-endian;
+ };
+
+ msi@41600 {
+ compatible = "fsl,mpc8544-msi", "fsl,mpic-msi";
+ reg = <0x41600 0x80>;
+ msi-available-ranges = <0 0x100>;
+ interrupts = <
+ 0xe0 0
+ 0xe1 0
+ 0xe2 0
+ 0xe3 0
+ 0xe4 0
+ 0xe5 0
+ 0xe6 0
+ 0xe7 0>;
+ interrupt-parent = <&mpic>;
};
};
timebase-frequency = <0>; // 33 MHz, from uboot
bus-frequency = <0>; // 166 MHz
clock-frequency = <0>; // 825 MHz, from uboot
+ next-level-cache = <&L2>;
};
};
interrupts = <18 2>;
};
- l2-cache-controller@20000 {
+ L2: l2-cache-controller@20000 {
compatible = "fsl,8548-l2-cache-controller";
reg = <0x20000 0x1000>;
cache-line-size = <32>; // 32 bytes
};
mpic: pic@40000 {
- clock-frequency = <0>;
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <2>;
reg = <0x40000 0x40000>;
compatible = "chrp,open-pic";
device_type = "open-pic";
- big-endian;
};
};
timebase-frequency = <0>; // 33 MHz, from uboot
bus-frequency = <0>; // 166 MHz
clock-frequency = <0>; // 825 MHz, from uboot
+ next-level-cache = <&L2>;
};
};
interrupts = <18 2>;
};
- l2-cache-controller@20000 {
+ L2: l2-cache-controller@20000 {
compatible = "fsl,8555-l2-cache-controller";
reg = <0x20000 0x1000>;
cache-line-size = <32>; // 32 bytes
};
mpic: pic@40000 {
- clock-frequency = <0>;
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <2>;
reg = <0x40000 0x40000>;
compatible = "chrp,open-pic";
device_type = "open-pic";
- big-endian;
};
cpm@919c0 {
interrupts = <18 2>;
};
- l2-cache-controller@20000 {
+ L2: l2-cache-controller@20000 {
compatible = "fsl,8540-l2-cache-controller";
reg = <0x20000 0x1000>;
cache-line-size = <32>; // 32 bytes
#address-cells = <0>;
#interrupt-cells = <2>;
reg = <0x40000 0x40000>;
+ compatible = "chrp,open-pic";
device_type = "open-pic";
};
timebase-frequency = <0>;
bus-frequency = <0>;
clock-frequency = <0>;
+ next-level-cache = <&L2>;
};
};
interrupts = <18 2>;
};
- l2-cache-controller@20000 {
+ L2: l2-cache-controller@20000 {
compatible = "fsl,8568-l2-cache-controller";
reg = <0x20000 0x1000>;
cache-line-size = <32>; // 32 bytes
};
mpic: pic@40000 {
- clock-frequency = <0>;
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <2>;
reg = <0x40000 0x40000>;
compatible = "chrp,open-pic";
device_type = "open-pic";
- big-endian;
};
par_io@e0100 {
timebase-frequency = <0>;
bus-frequency = <0>;
clock-frequency = <0>;
+ next-level-cache = <&L2>;
};
PowerPC,8572@1 {
timebase-frequency = <0>;
bus-frequency = <0>;
clock-frequency = <0>;
+ next-level-cache = <&L2>;
};
};
interrupts = <18 2>;
};
- l2-cache-controller@20000 {
+ L2: l2-cache-controller@20000 {
compatible = "fsl,mpc8572-l2-cache-controller";
reg = <0x20000 0x1000>;
cache-line-size = <32>; // 32 bytes
fsl,has-rstcr;
};
+ msi@41600 {
+ compatible = "fsl,mpc8572-msi", "fsl,mpic-msi";
+ reg = <0x41600 0x80>;
+ msi-available-ranges = <0 0x100>;
+ interrupts = <
+ 0xe0 0
+ 0xe1 0
+ 0xe2 0
+ 0xe3 0
+ 0xe4 0
+ 0xe5 0
+ 0xe6 0
+ 0xe7 0>;
+ interrupt-parent = <&mpic>;
+ };
+
mpic: pic@40000 {
- clock-frequency = <0>;
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <2>;
reg = <0x40000 0x40000>;
compatible = "chrp,open-pic";
device_type = "open-pic";
- big-endian;
};
};
};
mpic: interrupt-controller@40000 {
- clock-frequency = <0>;
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <2>;
reg = <0x40000 0x40000>;
compatible = "chrp,open-pic";
device_type = "open-pic";
- big-endian;
+ };
+
+ msi@41600 {
+ compatible = "fsl,mpc8610-msi", "fsl,mpic-msi";
+ reg = <0x41600 0x80>;
+ msi-available-ranges = <0 0x100>;
+ interrupts = <
+ 0xe0 0
+ 0xe1 0
+ 0xe2 0
+ 0xe3 0
+ 0xe4 0
+ 0xe5 0
+ 0xe6 0
+ 0xe7 0>;
+ interrupt-parent = <&mpic>;
};
global-utilities@e0000 {
};
mpic: pic@40000 {
- clock-frequency = <0>;
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <2>;
reg = <0x40000 0x40000>;
compatible = "chrp,open-pic";
device_type = "open-pic";
- big-endian;
};
global-utilities@e0000 {
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
+/dts-v1/;
+
/ {
model = "SonyPS3";
compatible = "sony,ps3";
memory {
device_type = "memory";
- reg = <0 0 0 0>;
+ reg = <0x00000000 0x00000000 0x00000000 0x00000000>;
};
/*
cpu@0 {
device_type = "cpu";
- reg = <0>;
- ibm,ppc-interrupt-server#s = <0 1>;
+ reg = <0x00000000>;
+ ibm,ppc-interrupt-server#s = <0x0 0x1>;
clock-frequency = <0>;
timebase-frequency = <0>;
- i-cache-size = <8000>;
- d-cache-size = <8000>;
- i-cache-line-size = <80>;
- d-cache-line-size = <80>;
+ i-cache-size = <32768>;
+ d-cache-size = <32768>;
+ i-cache-line-size = <128>;
+ d-cache-line-size = <128>;
};
};
};
*
*/
+/dts-v1/;
+
/ {
#address-cells = <2>;
#size-cells = <1>;
model = "amcc,rainier";
compatible = "amcc,rainier";
- dcr-parent = <&/cpus/cpu@0>;
+ dcr-parent = <&{/cpus/cpu@0}>;
aliases {
ethernet0 = &EMAC0;
cpu@0 {
device_type = "cpu";
model = "PowerPC,440GRx";
- reg = <0>;
+ reg = <0x00000000>;
clock-frequency = <0>; /* Filled in by zImage */
timebase-frequency = <0>; /* Filled in by zImage */
- i-cache-line-size = <20>;
- d-cache-line-size = <20>;
- i-cache-size = <8000>;
- d-cache-size = <8000>;
+ i-cache-line-size = <32>;
+ d-cache-line-size = <32>;
+ i-cache-size = <32768>;
+ d-cache-size = <32768>;
dcr-controller;
dcr-access-method = "native";
};
memory {
device_type = "memory";
- reg = <0 0 0>; /* Filled in by zImage */
+ reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by zImage */
};
UIC0: interrupt-controller0 {
compatible = "ibm,uic-440grx","ibm,uic";
interrupt-controller;
cell-index = <0>;
- dcr-reg = <0c0 009>;
+ dcr-reg = <0x0c0 0x009>;
#address-cells = <0>;
#size-cells = <0>;
#interrupt-cells = <2>;
compatible = "ibm,uic-440grx","ibm,uic";
interrupt-controller;
cell-index = <1>;
- dcr-reg = <0d0 009>;
+ dcr-reg = <0x0d0 0x009>;
#address-cells = <0>;
#size-cells = <0>;
#interrupt-cells = <2>;
- interrupts = <1e 4 1f 4>; /* cascade */
+ interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
interrupt-parent = <&UIC0>;
};
compatible = "ibm,uic-440grx","ibm,uic";
interrupt-controller;
cell-index = <2>;
- dcr-reg = <0e0 009>;
+ dcr-reg = <0x0e0 0x009>;
#address-cells = <0>;
#size-cells = <0>;
#interrupt-cells = <2>;
- interrupts = <1c 4 1d 4>; /* cascade */
+ interrupts = <0x1c 0x4 0x1d 0x4>; /* cascade */
interrupt-parent = <&UIC0>;
};
SDR0: sdr {
compatible = "ibm,sdr-440grx", "ibm,sdr-440ep";
- dcr-reg = <00e 002>;
+ dcr-reg = <0x00e 0x002>;
};
CPR0: cpr {
compatible = "ibm,cpr-440grx", "ibm,cpr-440ep";
- dcr-reg = <00c 002>;
+ dcr-reg = <0x00c 0x002>;
};
plb {
SDRAM0: sdram {
compatible = "ibm,sdram-440grx", "ibm,sdram-44x-ddr2denali";
- dcr-reg = <010 2>;
+ dcr-reg = <0x010 0x002>;
};
DMA0: dma {
compatible = "ibm,dma-440grx", "ibm,dma-4xx";
- dcr-reg = <100 027>;
+ dcr-reg = <0x100 0x027>;
};
MAL0: mcmal {
compatible = "ibm,mcmal-440grx", "ibm,mcmal2";
- dcr-reg = <180 62>;
+ dcr-reg = <0x180 0x062>;
num-tx-chans = <2>;
num-rx-chans = <2>;
interrupt-parent = <&MAL0>;
- interrupts = <0 1 2 3 4>;
+ interrupts = <0x0 0x1 0x2 0x3 0x4>;
#interrupt-cells = <1>;
#address-cells = <0>;
#size-cells = <0>;
- interrupt-map = </*TXEOB*/ 0 &UIC0 a 4
- /*RXEOB*/ 1 &UIC0 b 4
- /*SERR*/ 2 &UIC1 0 4
- /*TXDE*/ 3 &UIC1 1 4
- /*RXDE*/ 4 &UIC1 2 4>;
- interrupt-map-mask = <ffffffff>;
+ interrupt-map = </*TXEOB*/ 0x0 &UIC0 0xa 0x4
+ /*RXEOB*/ 0x1 &UIC0 0xb 0x4
+ /*SERR*/ 0x2 &UIC1 0x0 0x4
+ /*TXDE*/ 0x3 &UIC1 0x1 0x4
+ /*RXDE*/ 0x4 &UIC1 0x2 0x4>;
+ interrupt-map-mask = <0xffffffff>;
};
POB0: opb {
compatible = "ibm,opb-440grx", "ibm,opb";
#address-cells = <1>;
#size-cells = <1>;
- ranges = <00000000 1 00000000 80000000
- 80000000 1 80000000 80000000>;
+ ranges = <0x00000000 0x00000001 0x00000000 0x80000000
+ 0x80000000 0x00000001 0x80000000 0x80000000>;
interrupt-parent = <&UIC1>;
- interrupts = <7 4>;
+ interrupts = <0x7 0x4>;
clock-frequency = <0>; /* Filled in by zImage */
EBC0: ebc {
compatible = "ibm,ebc-440grx", "ibm,ebc";
- dcr-reg = <012 2>;
+ dcr-reg = <0x012 0x002>;
#address-cells = <2>;
#size-cells = <1>;
clock-frequency = <0>; /* Filled in by zImage */
- interrupts = <5 1>;
+ interrupts = <0x5 0x1>;
interrupt-parent = <&UIC1>;
nor_flash@0,0 {
compatible = "amd,s29gl256n", "cfi-flash";
bank-width = <2>;
- reg = <0 000000 4000000>;
+ reg = <0x00000000 0x00000000 0x04000000>;
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "Kernel";
- reg = <0 180000>;
+ reg = <0x00000000 0x00180000>;
};
partition@180000 {
label = "ramdisk";
- reg = <180000 200000>;
+ reg = <0x00180000 0x00200000>;
};
partition@380000 {
label = "file system";
- reg = <380000 3aa0000>;
+ reg = <0x00380000 0x03aa0000>;
};
partition@3e20000 {
label = "kozio";
- reg = <3e20000 140000>;
+ reg = <0x03e20000 0x00140000>;
};
partition@3f60000 {
label = "env";
- reg = <3f60000 40000>;
+ reg = <0x03f60000 0x00040000>;
};
partition@3fa0000 {
label = "u-boot";
- reg = <3fa0000 60000>;
+ reg = <0x03fa0000 0x00060000>;
};
};
UART0: serial@ef600300 {
device_type = "serial";
compatible = "ns16550";
- reg = <ef600300 8>;
- virtual-reg = <ef600300>;
+ reg = <0xef600300 0x00000008>;
+ virtual-reg = <0xef600300>;
clock-frequency = <0>; /* Filled in by zImage */
- current-speed = <1c200>;
+ current-speed = <115200>;
interrupt-parent = <&UIC0>;
- interrupts = <0 4>;
+ interrupts = <0x0 0x4>;
};
UART1: serial@ef600400 {
device_type = "serial";
compatible = "ns16550";
- reg = <ef600400 8>;
- virtual-reg = <ef600400>;
+ reg = <0xef600400 0x00000008>;
+ virtual-reg = <0xef600400>;
clock-frequency = <0>;
current-speed = <0>;
interrupt-parent = <&UIC0>;
- interrupts = <1 4>;
+ interrupts = <0x1 0x4>;
};
UART2: serial@ef600500 {
device_type = "serial";
compatible = "ns16550";
- reg = <ef600500 8>;
- virtual-reg = <ef600500>;
+ reg = <0xef600500 0x00000008>;
+ virtual-reg = <0xef600500>;
clock-frequency = <0>;
current-speed = <0>;
interrupt-parent = <&UIC1>;
- interrupts = <3 4>;
+ interrupts = <0x3 0x4>;
};
UART3: serial@ef600600 {
device_type = "serial";
compatible = "ns16550";
- reg = <ef600600 8>;
- virtual-reg = <ef600600>;
+ reg = <0xef600600 0x00000008>;
+ virtual-reg = <0xef600600>;
clock-frequency = <0>;
current-speed = <0>;
interrupt-parent = <&UIC1>;
- interrupts = <4 4>;
+ interrupts = <0x4 0x4>;
};
IIC0: i2c@ef600700 {
compatible = "ibm,iic-440grx", "ibm,iic";
- reg = <ef600700 14>;
+ reg = <0xef600700 0x00000014>;
interrupt-parent = <&UIC0>;
- interrupts = <2 4>;
+ interrupts = <0x2 0x4>;
};
IIC1: i2c@ef600800 {
compatible = "ibm,iic-440grx", "ibm,iic";
- reg = <ef600800 14>;
+ reg = <0xef600800 0x00000014>;
interrupt-parent = <&UIC0>;
- interrupts = <7 4>;
+ interrupts = <0x7 0x4>;
};
ZMII0: emac-zmii@ef600d00 {
compatible = "ibm,zmii-440grx", "ibm,zmii";
- reg = <ef600d00 c>;
+ reg = <0xef600d00 0x0000000c>;
};
RGMII0: emac-rgmii@ef601000 {
compatible = "ibm,rgmii-440grx", "ibm,rgmii";
- reg = <ef601000 8>;
+ reg = <0xef601000 0x00000008>;
has-mdio;
};
device_type = "network";
compatible = "ibm,emac-440grx", "ibm,emac-440epx", "ibm,emac4";
interrupt-parent = <&EMAC0>;
- interrupts = <0 1>;
+ interrupts = <0x0 0x1>;
#interrupt-cells = <1>;
#address-cells = <0>;
#size-cells = <0>;
- interrupt-map = </*Status*/ 0 &UIC0 18 4
- /*Wake*/ 1 &UIC1 1d 4>;
- reg = <ef600e00 70>;
+ interrupt-map = </*Status*/ 0x0 &UIC0 0x18 0x4
+ /*Wake*/ 0x1 &UIC1 0x1d 0x4>;
+ reg = <0xef600e00 0x00000070>;
local-mac-address = [000000000000];
mal-device = <&MAL0>;
mal-tx-channel = <0>;
mal-rx-channel = <0>;
cell-index = <0>;
- max-frame-size = <2328>;
- rx-fifo-size = <1000>;
- tx-fifo-size = <800>;
+ max-frame-size = <9000>;
+ rx-fifo-size = <4096>;
+ tx-fifo-size = <2048>;
phy-mode = "rgmii";
- phy-map = <00000000>;
+ phy-map = <0x00000000>;
zmii-device = <&ZMII0>;
zmii-channel = <0>;
rgmii-device = <&RGMII0>;
device_type = "network";
compatible = "ibm,emac-440grx", "ibm,emac-440epx", "ibm,emac4";
interrupt-parent = <&EMAC1>;
- interrupts = <0 1>;
+ interrupts = <0x0 0x1>;
#interrupt-cells = <1>;
#address-cells = <0>;
#size-cells = <0>;
- interrupt-map = </*Status*/ 0 &UIC0 19 4
- /*Wake*/ 1 &UIC1 1f 4>;
- reg = <ef600f00 70>;
+ interrupt-map = </*Status*/ 0x0 &UIC0 0x19 0x4
+ /*Wake*/ 0x1 &UIC1 0x1f 0x4>;
+ reg = <0xef600f00 0x00000070>;
local-mac-address = [000000000000];
mal-device = <&MAL0>;
mal-tx-channel = <1>;
mal-rx-channel = <1>;
cell-index = <1>;
- max-frame-size = <2328>;
- rx-fifo-size = <1000>;
- tx-fifo-size = <800>;
+ max-frame-size = <9000>;
+ rx-fifo-size = <4096>;
+ tx-fifo-size = <2048>;
phy-mode = "rgmii";
- phy-map = <00000000>;
+ phy-map = <0x00000000>;
zmii-device = <&ZMII0>;
zmii-channel = <1>;
rgmii-device = <&RGMII0>;
#address-cells = <3>;
compatible = "ibm,plb440grx-pci", "ibm,plb-pci";
primary;
- reg = <1 eec00000 8 /* Config space access */
- 1 eed00000 4 /* IACK */
- 1 eed00000 4 /* Special cycle */
- 1 ef400000 40>; /* Internal registers */
+ reg = <0x00000001 0xeec00000 0x00000008 /* Config space access */
+ 0x00000001 0xeed00000 0x00000004 /* IACK */
+ 0x00000001 0xeed00000 0x00000004 /* Special cycle */
+ 0x00000001 0xef400000 0x00000040>; /* Internal registers */
/* Outbound ranges, one memory and one IO,
* later cannot be changed. Chip supports a second
* IO range but we don't use it for now
*/
- ranges = <02000000 0 80000000 1 80000000 0 10000000
- 01000000 0 00000000 1 e8000000 0 00100000>;
+ ranges = <0x02000000 0x0 0x80000000 0x1 0x80000000 0x0 0x40000000
+ 0x01000000 0x0 0x00000000 0x1 0xe8000000 0x0 0x00010000
+ 0x01000000 0x0 0x00000000 0x1 0xe8800000 0x0 0x03800000>;
/* Inbound 2GB range starting at 0 */
- dma-ranges = <42000000 0 0 0 0 0 80000000>;
+ dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
/* All PCI interrupts are routed to IRQ 67 */
- interrupt-map-mask = <0000 0 0 0>;
- interrupt-map = < 0000 0 0 0 &UIC2 3 8 >;
+ interrupt-map-mask = <0x0 0x0 0x0 0x0>;
+ interrupt-map = < 0x0 0x0 0x0 0x0 &UIC2 0x3 0x8 >;
};
};
timebase-frequency = <0>; // From uboot
bus-frequency = <0>;
clock-frequency = <0>;
+ next-level-cache = <&L2>;
};
};
interrupts = <0x12 0x2>;
};
- l2-cache-controller@20000 {
+ L2: l2-cache-controller@20000 {
compatible = "fsl,8548-l2-cache-controller";
reg = <0x20000 0x1000>;
cache-line-size = <0x20>; // 32 bytes
mpic: pic@40000 {
interrupt-controller;
#address-cells = <0>;
- #size-cells = <0>;
#interrupt-cells = <2>;
reg = <0x40000 0x40000>;
compatible = "chrp,open-pic";
device_type = "open-pic";
- big-endian;
};
};
timebase-frequency = <0>; // From uboot
bus-frequency = <0>;
clock-frequency = <0>;
+ next-level-cache = <&L2>;
};
};
interrupts = <0x12 0x2>;
};
- l2-cache-controller@20000 {
+ L2: l2-cache-controller@20000 {
compatible = "fsl,8560-l2-cache-controller";
reg = <0x20000 0x1000>;
cache-line-size = <0x20>; // 32 bytes
mpic: pic@40000 {
interrupt-controller;
#address-cells = <0>;
- #size-cells = <0>;
#interrupt-cells = <2>;
+ compatible = "chrp,open-pic";
reg = <0x40000 0x40000>;
device_type = "open-pic";
};
*
*/
+/dts-v1/;
+
/ {
#address-cells = <2>;
#size-cells = <1>;
model = "amcc,sequoia";
compatible = "amcc,sequoia";
- dcr-parent = <&/cpus/cpu@0>;
+ dcr-parent = <&{/cpus/cpu@0}>;
aliases {
ethernet0 = &EMAC0;
cpu@0 {
device_type = "cpu";
model = "PowerPC,440EPx";
- reg = <0>;
+ reg = <0x00000000>;
clock-frequency = <0>; /* Filled in by zImage */
timebase-frequency = <0>; /* Filled in by zImage */
- i-cache-line-size = <20>;
- d-cache-line-size = <20>;
- i-cache-size = <8000>;
- d-cache-size = <8000>;
+ i-cache-line-size = <32>;
+ d-cache-line-size = <32>;
+ i-cache-size = <32768>;
+ d-cache-size = <32768>;
dcr-controller;
dcr-access-method = "native";
};
memory {
device_type = "memory";
- reg = <0 0 0>; /* Filled in by zImage */
+ reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by zImage */
};
UIC0: interrupt-controller0 {
compatible = "ibm,uic-440epx","ibm,uic";
interrupt-controller;
cell-index = <0>;
- dcr-reg = <0c0 009>;
+ dcr-reg = <0x0c0 0x009>;
#address-cells = <0>;
#size-cells = <0>;
#interrupt-cells = <2>;
compatible = "ibm,uic-440epx","ibm,uic";
interrupt-controller;
cell-index = <1>;
- dcr-reg = <0d0 009>;
+ dcr-reg = <0x0d0 0x009>;
#address-cells = <0>;
#size-cells = <0>;
#interrupt-cells = <2>;
- interrupts = <1e 4 1f 4>; /* cascade */
+ interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
interrupt-parent = <&UIC0>;
};
compatible = "ibm,uic-440epx","ibm,uic";
interrupt-controller;
cell-index = <2>;
- dcr-reg = <0e0 009>;
+ dcr-reg = <0x0e0 0x009>;
#address-cells = <0>;
#size-cells = <0>;
#interrupt-cells = <2>;
- interrupts = <1c 4 1d 4>; /* cascade */
+ interrupts = <0x1c 0x4 0x1d 0x4>; /* cascade */
interrupt-parent = <&UIC0>;
};
SDR0: sdr {
compatible = "ibm,sdr-440epx", "ibm,sdr-440ep";
- dcr-reg = <00e 002>;
+ dcr-reg = <0x00e 0x002>;
};
CPR0: cpr {
compatible = "ibm,cpr-440epx", "ibm,cpr-440ep";
- dcr-reg = <00c 002>;
+ dcr-reg = <0x00c 0x002>;
};
plb {
SDRAM0: sdram {
compatible = "ibm,sdram-440epx", "ibm,sdram-44x-ddr2denali";
- dcr-reg = <010 2>;
+ dcr-reg = <0x010 0x002>;
};
DMA0: dma {
compatible = "ibm,dma-440epx", "ibm,dma-4xx";
- dcr-reg = <100 027>;
+ dcr-reg = <0x100 0x027>;
};
MAL0: mcmal {
compatible = "ibm,mcmal-440epx", "ibm,mcmal2";
- dcr-reg = <180 62>;
+ dcr-reg = <0x180 0x062>;
num-tx-chans = <2>;
num-rx-chans = <2>;
interrupt-parent = <&MAL0>;
- interrupts = <0 1 2 3 4>;
+ interrupts = <0x0 0x1 0x2 0x3 0x4>;
#interrupt-cells = <1>;
#address-cells = <0>;
#size-cells = <0>;
- interrupt-map = </*TXEOB*/ 0 &UIC0 a 4
- /*RXEOB*/ 1 &UIC0 b 4
- /*SERR*/ 2 &UIC1 0 4
- /*TXDE*/ 3 &UIC1 1 4
- /*RXDE*/ 4 &UIC1 2 4>;
- interrupt-map-mask = <ffffffff>;
+ interrupt-map = </*TXEOB*/ 0x0 &UIC0 0xa 0x4
+ /*RXEOB*/ 0x1 &UIC0 0xb 0x4
+ /*SERR*/ 0x2 &UIC1 0x0 0x4
+ /*TXDE*/ 0x3 &UIC1 0x1 0x4
+ /*RXDE*/ 0x4 &UIC1 0x2 0x4>;
+ interrupt-map-mask = <0xffffffff>;
};
USB1: usb@e0000400 {
compatible = "ohci-be";
- reg = <0 e0000400 60>;
+ reg = <0x00000000 0xe0000400 0x00000060>;
interrupt-parent = <&UIC0>;
- interrupts = <15 8>;
+ interrupts = <0x15 0x8>;
};
USB0: ehci@e0000300 {
compatible = "ibm,usb-ehci-440epx", "usb-ehci";
interrupt-parent = <&UIC0>;
- interrupts = <1a 4>;
- reg = <0 e0000300 90 0 e0000390 70>;
+ interrupts = <0x1a 0x4>;
+ reg = <0x00000000 0xe0000300 0x00000090 0x00000000 0xe0000390 0x00000070>;
big-endian;
};
compatible = "ibm,opb-440epx", "ibm,opb";
#address-cells = <1>;
#size-cells = <1>;
- ranges = <00000000 1 00000000 80000000
- 80000000 1 80000000 80000000>;
+ ranges = <0x00000000 0x00000001 0x00000000 0x80000000
+ 0x80000000 0x00000001 0x80000000 0x80000000>;
interrupt-parent = <&UIC1>;
- interrupts = <7 4>;
+ interrupts = <0x7 0x4>;
clock-frequency = <0>; /* Filled in by zImage */
EBC0: ebc {
compatible = "ibm,ebc-440epx", "ibm,ebc";
- dcr-reg = <012 2>;
+ dcr-reg = <0x012 0x002>;
#address-cells = <2>;
#size-cells = <1>;
clock-frequency = <0>; /* Filled in by zImage */
- interrupts = <5 1>;
+ interrupts = <0x5 0x1>;
interrupt-parent = <&UIC1>;
nor_flash@0,0 {
compatible = "amd,s29gl256n", "cfi-flash";
bank-width = <2>;
- reg = <0 000000 4000000>;
+ reg = <0x00000000 0x00000000 0x04000000>;
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "Kernel";
- reg = <0 180000>;
+ reg = <0x00000000 0x00180000>;
};
partition@180000 {
label = "ramdisk";
- reg = <180000 200000>;
+ reg = <0x00180000 0x00200000>;
};
partition@380000 {
label = "file system";
- reg = <380000 3aa0000>;
+ reg = <0x00380000 0x03aa0000>;
};
partition@3e20000 {
label = "kozio";
- reg = <3e20000 140000>;
+ reg = <0x03e20000 0x00140000>;
};
partition@3f60000 {
label = "env";
- reg = <3f60000 40000>;
+ reg = <0x03f60000 0x00040000>;
};
partition@3fa0000 {
label = "u-boot";
- reg = <3fa0000 60000>;
+ reg = <0x03fa0000 0x00060000>;
};
};
UART0: serial@ef600300 {
device_type = "serial";
compatible = "ns16550";
- reg = <ef600300 8>;
- virtual-reg = <ef600300>;
+ reg = <0xef600300 0x00000008>;
+ virtual-reg = <0xef600300>;
clock-frequency = <0>; /* Filled in by zImage */
- current-speed = <1c200>;
+ current-speed = <115200>;
interrupt-parent = <&UIC0>;
- interrupts = <0 4>;
+ interrupts = <0x0 0x4>;
};
UART1: serial@ef600400 {
device_type = "serial";
compatible = "ns16550";
- reg = <ef600400 8>;
- virtual-reg = <ef600400>;
+ reg = <0xef600400 0x00000008>;
+ virtual-reg = <0xef600400>;
clock-frequency = <0>;
current-speed = <0>;
interrupt-parent = <&UIC0>;
- interrupts = <1 4>;
+ interrupts = <0x1 0x4>;
};
UART2: serial@ef600500 {
device_type = "serial";
compatible = "ns16550";
- reg = <ef600500 8>;
- virtual-reg = <ef600500>;
+ reg = <0xef600500 0x00000008>;
+ virtual-reg = <0xef600500>;
clock-frequency = <0>;
current-speed = <0>;
interrupt-parent = <&UIC1>;
- interrupts = <3 4>;
+ interrupts = <0x3 0x4>;
};
UART3: serial@ef600600 {
device_type = "serial";
compatible = "ns16550";
- reg = <ef600600 8>;
- virtual-reg = <ef600600>;
+ reg = <0xef600600 0x00000008>;
+ virtual-reg = <0xef600600>;
clock-frequency = <0>;
current-speed = <0>;
interrupt-parent = <&UIC1>;
- interrupts = <4 4>;
+ interrupts = <0x4 0x4>;
};
IIC0: i2c@ef600700 {
compatible = "ibm,iic-440epx", "ibm,iic";
- reg = <ef600700 14>;
+ reg = <0xef600700 0x00000014>;
interrupt-parent = <&UIC0>;
- interrupts = <2 4>;
+ interrupts = <0x2 0x4>;
};
IIC1: i2c@ef600800 {
compatible = "ibm,iic-440epx", "ibm,iic";
- reg = <ef600800 14>;
+ reg = <0xef600800 0x00000014>;
interrupt-parent = <&UIC0>;
- interrupts = <7 4>;
+ interrupts = <0x7 0x4>;
};
ZMII0: emac-zmii@ef600d00 {
compatible = "ibm,zmii-440epx", "ibm,zmii";
- reg = <ef600d00 c>;
+ reg = <0xef600d00 0x0000000c>;
};
RGMII0: emac-rgmii@ef601000 {
compatible = "ibm,rgmii-440epx", "ibm,rgmii";
- reg = <ef601000 8>;
+ reg = <0xef601000 0x00000008>;
has-mdio;
};
device_type = "network";
compatible = "ibm,emac-440epx", "ibm,emac4";
interrupt-parent = <&EMAC0>;
- interrupts = <0 1>;
+ interrupts = <0x0 0x1>;
#interrupt-cells = <1>;
#address-cells = <0>;
#size-cells = <0>;
- interrupt-map = </*Status*/ 0 &UIC0 18 4
- /*Wake*/ 1 &UIC1 1d 4>;
- reg = <ef600e00 70>;
+ interrupt-map = </*Status*/ 0x0 &UIC0 0x18 0x4
+ /*Wake*/ 0x1 &UIC1 0x1d 0x4>;
+ reg = <0xef600e00 0x00000070>;
local-mac-address = [000000000000];
mal-device = <&MAL0>;
mal-tx-channel = <0>;
mal-rx-channel = <0>;
cell-index = <0>;
- max-frame-size = <2328>;
- rx-fifo-size = <1000>;
- tx-fifo-size = <800>;
+ max-frame-size = <9000>;
+ rx-fifo-size = <4096>;
+ tx-fifo-size = <2048>;
phy-mode = "rgmii";
- phy-map = <00000000>;
+ phy-map = <0x00000000>;
zmii-device = <&ZMII0>;
zmii-channel = <0>;
rgmii-device = <&RGMII0>;
device_type = "network";
compatible = "ibm,emac-440epx", "ibm,emac4";
interrupt-parent = <&EMAC1>;
- interrupts = <0 1>;
+ interrupts = <0x0 0x1>;
#interrupt-cells = <1>;
#address-cells = <0>;
#size-cells = <0>;
- interrupt-map = </*Status*/ 0 &UIC0 19 4
- /*Wake*/ 1 &UIC1 1f 4>;
- reg = <ef600f00 70>;
+ interrupt-map = </*Status*/ 0x0 &UIC0 0x19 0x4
+ /*Wake*/ 0x1 &UIC1 0x1f 0x4>;
+ reg = <0xef600f00 0x00000070>;
local-mac-address = [000000000000];
mal-device = <&MAL0>;
mal-tx-channel = <1>;
mal-rx-channel = <1>;
cell-index = <1>;
- max-frame-size = <2328>;
- rx-fifo-size = <1000>;
- tx-fifo-size = <800>;
+ max-frame-size = <9000>;
+ rx-fifo-size = <4096>;
+ tx-fifo-size = <2048>;
phy-mode = "rgmii";
- phy-map = <00000000>;
+ phy-map = <0x00000000>;
zmii-device = <&ZMII0>;
zmii-channel = <1>;
rgmii-device = <&RGMII0>;
#address-cells = <3>;
compatible = "ibm,plb440epx-pci", "ibm,plb-pci";
primary;
- reg = <1 eec00000 8 /* Config space access */
- 1 eed00000 4 /* IACK */
- 1 eed00000 4 /* Special cycle */
- 1 ef400000 40>; /* Internal registers */
+ reg = <0x00000001 0xeec00000 0x00000008 /* Config space access */
+ 0x00000001 0xeed00000 0x00000004 /* IACK */
+ 0x00000001 0xeed00000 0x00000004 /* Special cycle */
+ 0x00000001 0xef400000 0x00000040>; /* Internal registers */
/* Outbound ranges, one memory and one IO,
* later cannot be changed. Chip supports a second
* I/O 1 E800 0000 1 E800 FFFF 64KB
* I/O 1 E880 0000 1 EBFF FFFF 56MB
*/
- ranges = <02000000 0 80000000 1 80000000 0 40000000
- 01000000 0 00000000 1 e8000000 0 00010000
- 01000000 0 00000000 1 e8800000 0 03800000>;
+ ranges = <0x02000000 0x00000000 0x80000000 0x00000001 0x80000000 0x00000000 0x40000000
+ 0x01000000 0x00000000 0x00000000 0x00000001 0xe8000000 0x00000000 0x00010000
+ 0x01000000 0x00000000 0x00000000 0x00000001 0xe8800000 0x00000000 0x03800000>;
/* Inbound 2GB range starting at 0 */
- dma-ranges = <42000000 0 0 0 0 0 80000000>;
+ dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
/* All PCI interrupts are routed to IRQ 67 */
- interrupt-map-mask = <0000 0 0 0>;
- interrupt-map = < 0000 0 0 0 &UIC2 3 8 >;
+ interrupt-map-mask = <0x0 0x0 0x0 0x0>;
+ interrupt-map = < 0x0 0x0 0x0 0x0 &UIC2 0x3 0x8 >;
};
};
mpic: interrupt-controller@40000 {
#interrupt-cells = <2>;
+ #address-cells = <0>;
device_type = "open-pic";
compatible = "chrp,open-pic";
interrupt-controller;
timebase-frequency = <0>;
bus-frequency = <0>;
clock-frequency = <0>;
+ next-level-cache = <&L2>;
};
};
interrupts = <18 2>;
};
- l2-cache-controller@20000 {
+ L2: l2-cache-controller@20000 {
compatible = "fsl,8540-l2-cache-controller";
reg = <0x20000 0x1000>;
cache-line-size = <32>;
#address-cells = <0>;
#interrupt-cells = <2>;
reg = <0x40000 0x40000>;
+ compatible = "chrp,open-pic";
device_type = "open-pic";
};
* any warranty of any kind, whether express or implied.
*/
+/dts-v1/;
+
/ {
#address-cells = <2>;
#size-cells = <1>;
model = "amcc,taishan";
compatible = "amcc,taishan";
- dcr-parent = <&/cpus/cpu@0>;
+ dcr-parent = <&{/cpus/cpu@0}>;
aliases {
ethernet0 = &EMAC2;
cpu@0 {
device_type = "cpu";
model = "PowerPC,440GX";
- reg = <0>;
- clock-frequency = <2FAF0800>; // 800MHz
+ reg = <0x00000000>;
+ clock-frequency = <800000000>; // 800MHz
timebase-frequency = <0>; // Filled in by zImage
- i-cache-line-size = <32>;
- d-cache-line-size = <32>;
- i-cache-size = <8000>; /* 32 kB */
- d-cache-size = <8000>; /* 32 kB */
+ i-cache-line-size = <50>;
+ d-cache-line-size = <50>;
+ i-cache-size = <32768>; /* 32 kB */
+ d-cache-size = <32768>; /* 32 kB */
dcr-controller;
dcr-access-method = "native";
};
memory {
device_type = "memory";
- reg = <0 0 0>; // Filled in by zImage
+ reg = <0x00000000 0x00000000 0x00000000>; // Filled in by zImage
};
compatible = "ibm,uic-440gx", "ibm,uic";
interrupt-controller;
cell-index = <3>;
- dcr-reg = <200 009>;
+ dcr-reg = <0x200 0x009>;
#address-cells = <0>;
#size-cells = <0>;
#interrupt-cells = <2>;
compatible = "ibm,uic-440gx", "ibm,uic";
interrupt-controller;
cell-index = <0>;
- dcr-reg = <0c0 009>;
+ dcr-reg = <0x0c0 0x009>;
#address-cells = <0>;
#size-cells = <0>;
#interrupt-cells = <2>;
- interrupts = <01 4 00 4>; /* cascade - first non-critical */
+ interrupts = <0x1 0x4 0x0 0x4>; /* cascade - first non-critical */
interrupt-parent = <&UICB0>;
};
compatible = "ibm,uic-440gx", "ibm,uic";
interrupt-controller;
cell-index = <1>;
- dcr-reg = <0d0 009>;
+ dcr-reg = <0x0d0 0x009>;
#address-cells = <0>;
#size-cells = <0>;
#interrupt-cells = <2>;
- interrupts = <03 4 02 4>; /* cascade */
+ interrupts = <0x3 0x4 0x2 0x4>; /* cascade */
interrupt-parent = <&UICB0>;
};
compatible = "ibm,uic-440gx", "ibm,uic";
interrupt-controller;
cell-index = <2>; /* was 1 */
- dcr-reg = <210 009>;
+ dcr-reg = <0x210 0x009>;
#address-cells = <0>;
#size-cells = <0>;
#interrupt-cells = <2>;
- interrupts = <05 4 04 4>; /* cascade */
+ interrupts = <0x5 0x4 0x4 0x4>; /* cascade */
interrupt-parent = <&UICB0>;
};
CPC0: cpc {
compatible = "ibm,cpc-440gp";
- dcr-reg = <0b0 003 0e0 010>;
+ dcr-reg = <0x0b0 0x003 0x0e0 0x010>;
// FIXME: anything else?
};
L2C0: l2c {
compatible = "ibm,l2-cache-440gx", "ibm,l2-cache";
- dcr-reg = <20 8 /* Internal SRAM DCR's */
- 30 8>; /* L2 cache DCR's */
- cache-line-size = <20>; /* 32 bytes */
- cache-size = <40000>; /* L2, 256K */
+ dcr-reg = <0x020 0x008 /* Internal SRAM DCR's */
+ 0x030 0x008>; /* L2 cache DCR's */
+ cache-line-size = <32>; /* 32 bytes */
+ cache-size = <262144>; /* L2, 256K */
interrupt-parent = <&UIC2>;
- interrupts = <17 1>;
+ interrupts = <0x17 0x1>;
};
plb {
#address-cells = <2>;
#size-cells = <1>;
ranges;
- clock-frequency = <9896800>; // 160MHz
+ clock-frequency = <160000000>; // 160MHz
SDRAM0: memory-controller {
compatible = "ibm,sdram-440gp";
- dcr-reg = <010 2>;
+ dcr-reg = <0x010 0x002>;
// FIXME: anything else?
};
SRAM0: sram {
compatible = "ibm,sram-440gp";
- dcr-reg = <020 8 00a 1>;
+ dcr-reg = <0x020 0x008 0x00a 0x001>;
};
DMA0: dma {
// FIXME: ???
compatible = "ibm,dma-440gp";
- dcr-reg = <100 027>;
+ dcr-reg = <0x100 0x027>;
};
MAL0: mcmal {
compatible = "ibm,mcmal-440gx", "ibm,mcmal2";
- dcr-reg = <180 62>;
+ dcr-reg = <0x180 0x062>;
num-tx-chans = <4>;
num-rx-chans = <4>;
interrupt-parent = <&MAL0>;
- interrupts = <0 1 2 3 4>;
+ interrupts = <0x0 0x1 0x2 0x3 0x4>;
#interrupt-cells = <1>;
#address-cells = <0>;
#size-cells = <0>;
- interrupt-map = </*TXEOB*/ 0 &UIC0 a 4
- /*RXEOB*/ 1 &UIC0 b 4
- /*SERR*/ 2 &UIC1 0 4
- /*TXDE*/ 3 &UIC1 1 4
- /*RXDE*/ 4 &UIC1 2 4>;
- interrupt-map-mask = <ffffffff>;
+ interrupt-map = </*TXEOB*/ 0x0 &UIC0 0xa 0x4
+ /*RXEOB*/ 0x1 &UIC0 0xb 0x4
+ /*SERR*/ 0x2 &UIC1 0x0 0x4
+ /*TXDE*/ 0x3 &UIC1 0x1 0x4
+ /*RXDE*/ 0x4 &UIC1 0x2 0x4>;
+ interrupt-map-mask = <0xffffffff>;
};
POB0: opb {
#size-cells = <1>;
/* Wish there was a nicer way of specifying a full 32-bit
range */
- ranges = <00000000 1 00000000 80000000
- 80000000 1 80000000 80000000>;
- dcr-reg = <090 00b>;
+ ranges = <0x00000000 0x00000001 0x00000000 0x80000000
+ 0x80000000 0x00000001 0x80000000 0x80000000>;
+ dcr-reg = <0x090 0x00b>;
interrupt-parent = <&UIC1>;
- interrupts = <7 4>;
- clock-frequency = <4C4B400>; // 80MHz
+ interrupts = <0x7 0x4>;
+ clock-frequency = <80000000>; // 80MHz
EBC0: ebc {
compatible = "ibm,ebc-440gx", "ibm,ebc";
- dcr-reg = <012 2>;
+ dcr-reg = <0x012 0x002>;
#address-cells = <2>;
#size-cells = <1>;
- clock-frequency = <4C4B400>; // 80MHz
+ clock-frequency = <80000000>; // 80MHz
/* ranges property is supplied by zImage
* based on firmware's configuration of the
* EBC bridge */
- interrupts = <5 4>;
+ interrupts = <0x5 0x4>;
interrupt-parent = <&UIC1>;
/* TODO: Add other EBC devices */
UART0: serial@40000200 {
device_type = "serial";
compatible = "ns16550";
- reg = <40000200 8>;
- virtual-reg = <e0000200>;
- clock-frequency = <A8C000>;
- current-speed = <1C200>; /* 115200 */
+ reg = <0x40000200 0x00000008>;
+ virtual-reg = <0xe0000200>;
+ clock-frequency = <11059200>;
+ current-speed = <115200>; /* 115200 */
interrupt-parent = <&UIC0>;
- interrupts = <0 4>;
+ interrupts = <0x0 0x4>;
};
UART1: serial@40000300 {
device_type = "serial";
compatible = "ns16550";
- reg = <40000300 8>;
- virtual-reg = <e0000300>;
- clock-frequency = <A8C000>;
- current-speed = <1C200>; /* 115200 */
+ reg = <0x40000300 0x00000008>;
+ virtual-reg = <0xe0000300>;
+ clock-frequency = <11059200>;
+ current-speed = <115200>; /* 115200 */
interrupt-parent = <&UIC0>;
- interrupts = <1 4>;
+ interrupts = <0x1 0x4>;
};
IIC0: i2c@40000400 {
/* FIXME */
compatible = "ibm,iic-440gp", "ibm,iic";
- reg = <40000400 14>;
+ reg = <0x40000400 0x00000014>;
interrupt-parent = <&UIC0>;
- interrupts = <2 4>;
+ interrupts = <0x2 0x4>;
};
IIC1: i2c@40000500 {
/* FIXME */
compatible = "ibm,iic-440gp", "ibm,iic";
- reg = <40000500 14>;
+ reg = <0x40000500 0x00000014>;
interrupt-parent = <&UIC0>;
- interrupts = <3 4>;
+ interrupts = <0x3 0x4>;
};
GPIO0: gpio@40000700 {
/* FIXME */
compatible = "ibm,gpio-440gp";
- reg = <40000700 20>;
+ reg = <0x40000700 0x00000020>;
};
ZMII0: emac-zmii@40000780 {
compatible = "ibm,zmii-440gx", "ibm,zmii";
- reg = <40000780 c>;
+ reg = <0x40000780 0x0000000c>;
};
RGMII0: emac-rgmii@40000790 {
compatible = "ibm,rgmii";
- reg = <40000790 8>;
+ reg = <0x40000790 0x00000008>;
};
TAH0: emac-tah@40000b50 {
compatible = "ibm,tah-440gx", "ibm,tah";
- reg = <40000b50 30>;
+ reg = <0x40000b50 0x00000030>;
};
TAH1: emac-tah@40000d50 {
compatible = "ibm,tah-440gx", "ibm,tah";
- reg = <40000d50 30>;
+ reg = <0x40000d50 0x00000030>;
};
EMAC0: ethernet@40000800 {
- unused = <1>;
+ unused = <0x1>;
device_type = "network";
compatible = "ibm,emac-440gx", "ibm,emac4";
interrupt-parent = <&UIC1>;
- interrupts = <1c 4 1d 4>;
- reg = <40000800 70>;
+ interrupts = <0x1c 0x4 0x1d 0x4>;
+ reg = <0x40000800 0x00000070>;
local-mac-address = [000000000000]; // Filled in by zImage
mal-device = <&MAL0>;
mal-tx-channel = <0>;
mal-rx-channel = <0>;
cell-index = <0>;
- max-frame-size = <5dc>;
- rx-fifo-size = <1000>;
- tx-fifo-size = <800>;
+ max-frame-size = <1500>;
+ rx-fifo-size = <4096>;
+ tx-fifo-size = <2048>;
phy-mode = "rmii";
- phy-map = <00000001>;
+ phy-map = <0x00000001>;
zmii-device = <&ZMII0>;
zmii-channel = <0>;
};
EMAC1: ethernet@40000900 {
- unused = <1>;
+ unused = <0x1>;
device_type = "network";
compatible = "ibm,emac-440gx", "ibm,emac4";
interrupt-parent = <&UIC1>;
- interrupts = <1e 4 1f 4>;
- reg = <40000900 70>;
+ interrupts = <0x1e 0x4 0x1f 0x4>;
+ reg = <0x40000900 0x00000070>;
local-mac-address = [000000000000]; // Filled in by zImage
mal-device = <&MAL0>;
mal-tx-channel = <1>;
mal-rx-channel = <1>;
cell-index = <1>;
- max-frame-size = <5dc>;
- rx-fifo-size = <1000>;
- tx-fifo-size = <800>;
+ max-frame-size = <1500>;
+ rx-fifo-size = <4096>;
+ tx-fifo-size = <2048>;
phy-mode = "rmii";
- phy-map = <00000001>;
+ phy-map = <0x00000001>;
zmii-device = <&ZMII0>;
zmii-channel = <1>;
};
device_type = "network";
compatible = "ibm,emac-440gx", "ibm,emac4";
interrupt-parent = <&UIC2>;
- interrupts = <0 4 1 4>;
- reg = <40000c00 70>;
+ interrupts = <0x0 0x4 0x1 0x4>;
+ reg = <0x40000c00 0x00000070>;
local-mac-address = [000000000000]; // Filled in by zImage
mal-device = <&MAL0>;
mal-tx-channel = <2>;
mal-rx-channel = <2>;
cell-index = <2>;
- max-frame-size = <2328>;
- rx-fifo-size = <1000>;
- tx-fifo-size = <800>;
+ max-frame-size = <9000>;
+ rx-fifo-size = <4096>;
+ tx-fifo-size = <2048>;
phy-mode = "rgmii";
- phy-map = <00000001>;
+ phy-map = <0x00000001>;
rgmii-device = <&RGMII0>;
rgmii-channel = <0>;
zmii-device = <&ZMII0>;
device_type = "network";
compatible = "ibm,emac-440gx", "ibm,emac4";
interrupt-parent = <&UIC2>;
- interrupts = <2 4 3 4>;
- reg = <40000e00 70>;
+ interrupts = <0x2 0x4 0x3 0x4>;
+ reg = <0x40000e00 0x00000070>;
local-mac-address = [000000000000]; // Filled in by zImage
mal-device = <&MAL0>;
mal-tx-channel = <3>;
mal-rx-channel = <3>;
cell-index = <3>;
- max-frame-size = <2328>;
- rx-fifo-size = <1000>;
- tx-fifo-size = <800>;
+ max-frame-size = <9000>;
+ rx-fifo-size = <4096>;
+ tx-fifo-size = <2048>;
phy-mode = "rgmii";
- phy-map = <00000003>;
+ phy-map = <0x00000003>;
rgmii-device = <&RGMII0>;
rgmii-channel = <1>;
zmii-device = <&ZMII0>;
GPT0: gpt@40000a00 {
/* FIXME */
- reg = <40000a00 d4>;
+ reg = <0x40000a00 0x000000d4>;
interrupt-parent = <&UIC0>;
- interrupts = <12 4 13 4 14 4 15 4 16 4>;
+ interrupts = <0x12 0x4 0x13 0x4 0x14 0x4 0x15 0x4 0x16 0x4>;
};
};
primary;
large-inbound-windows;
enable-msi-hole;
- reg = <2 0ec00000 8 /* Config space access */
- 0 0 0 /* no IACK cycles */
- 2 0ed00000 4 /* Special cycles */
- 2 0ec80000 100 /* Internal registers */
- 2 0ec80100 fc>; /* Internal messaging registers */
+ reg = <0x00000002 0x0ec00000 0x00000008 /* Config space access */
+ 0x00000000 0x00000000 0x00000000 /* no IACK cycles */
+ 0x00000002 0x0ed00000 0x00000004 /* Special cycles */
+ 0x00000002 0x0ec80000 0x00000100 /* Internal registers */
+ 0x00000002 0x0ec80100 0x000000fc>; /* Internal messaging registers */
/* Outbound ranges, one memory and one IO,
* later cannot be changed
*/
- ranges = <02000000 0 80000000 00000003 80000000 0 80000000
- 01000000 0 00000000 00000002 08000000 0 00010000>;
+ ranges = <0x02000000 0x00000000 0x80000000 0x00000003 0x80000000 0x00000000 0x80000000
+ 0x01000000 0x00000000 0x00000000 0x00000002 0x08000000 0x00000000 0x00010000>;
/* Inbound 2GB range starting at 0 */
- dma-ranges = <42000000 0 0 0 0 0 80000000>;
+ dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
- interrupt-map-mask = <f800 0 0 7>;
+ interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 1 */
- 0800 0 0 1 &UIC0 17 8
- 0800 0 0 2 &UIC0 18 8
- 0800 0 0 3 &UIC0 19 8
- 0800 0 0 4 &UIC0 1a 8
+ 0x800 0x0 0x0 0x1 &UIC0 0x17 0x8
+ 0x800 0x0 0x0 0x2 &UIC0 0x18 0x8
+ 0x800 0x0 0x0 0x3 &UIC0 0x19 0x8
+ 0x800 0x0 0x0 0x4 &UIC0 0x1a 0x8
/* IDSEL 2 */
- 1000 0 0 1 &UIC0 18 8
- 1000 0 0 2 &UIC0 19 8
- 1000 0 0 3 &UIC0 1a 8
- 1000 0 0 4 &UIC0 17 8
+ 0x1000 0x0 0x0 0x1 &UIC0 0x18 0x8
+ 0x1000 0x0 0x0 0x2 &UIC0 0x19 0x8
+ 0x1000 0x0 0x0 0x3 &UIC0 0x1a 0x8
+ 0x1000 0x0 0x0 0x4 &UIC0 0x17 0x8
>;
};
};
timebase-frequency = <0>;
bus-frequency = <0>;
clock-frequency = <0>;
+ next-level-cache = <&L2>;
};
};
interrupts = <18 2>;
};
- l2-cache-controller@20000 {
+ L2: l2-cache-controller@20000 {
compatible = "fsl,8540-l2-cache-controller";
reg = <0x20000 0x1000>;
cache-line-size = <32>;
#interrupt-cells = <2>;
reg = <0x40000 0x40000>;
device_type = "open-pic";
+ compatible = "chrp,open-pic";
};
};
timebase-frequency = <0>;
bus-frequency = <0>;
clock-frequency = <0>;
+ next-level-cache = <&L2>;
};
};
interrupts = <18 2>;
};
- l2-cache-controller@20000 {
+ L2: l2-cache-controller@20000 {
compatible = "fsl,8540-l2-cache-controller";
reg = <0x20000 0x1000>;
cache-line-size = <32>;
#interrupt-cells = <2>;
reg = <0x40000 0x40000>;
device_type = "open-pic";
+ compatible = "chrp,open-pic";
};
cpm@919c0 {
timebase-frequency = <0>;
bus-frequency = <0>;
clock-frequency = <0>;
+ next-level-cache = <&L2>;
};
};
interrupts = <18 2>;
};
- l2-cache-controller@20000 {
+ L2: l2-cache-controller@20000 {
compatible = "fsl,8540-l2-cache-controller";
reg = <0x20000 0x1000>;
cache-line-size = <32>;
#interrupt-cells = <2>;
reg = <0x40000 0x40000>;
device_type = "open-pic";
+ compatible = "chrp,open-pic";
};
cpm@919c0 {
timebase-frequency = <0>;
bus-frequency = <0>;
clock-frequency = <0>;
+ next-level-cache = <&L2>;
};
};
interrupts = <18 2>;
};
- l2-cache-controller@20000 {
+ L2: l2-cache-controller@20000 {
compatible = "fsl,8540-l2-cache-controller";
reg = <0x20000 0x1000>;
cache-line-size = <32>;
#interrupt-cells = <2>;
reg = <0x40000 0x40000>;
device_type = "open-pic";
+ compatible = "chrp,open-pic";
};
cpm@919c0 {
* any warranty of any kind, whether express or implied.
*/
+/dts-v1/;
+
/ {
#address-cells = <1>;
#size-cells = <1>;
model = "ibm,walnut";
compatible = "ibm,walnut";
- dcr-parent = <&/cpus/cpu@0>;
+ dcr-parent = <&{/cpus/cpu@0}>;
aliases {
ethernet0 = &EMAC;
cpu@0 {
device_type = "cpu";
model = "PowerPC,405GP";
- reg = <0>;
- clock-frequency = <bebc200>; /* Filled in by zImage */
+ reg = <0x00000000>;
+ clock-frequency = <200000000>; /* Filled in by zImage */
timebase-frequency = <0>; /* Filled in by zImage */
- i-cache-line-size = <20>;
- d-cache-line-size = <20>;
- i-cache-size = <4000>;
- d-cache-size = <4000>;
+ i-cache-line-size = <32>;
+ d-cache-line-size = <32>;
+ i-cache-size = <16384>;
+ d-cache-size = <16384>;
dcr-controller;
dcr-access-method = "native";
};
memory {
device_type = "memory";
- reg = <0 0>; /* Filled in by zImage */
+ reg = <0x00000000 0x00000000>; /* Filled in by zImage */
};
UIC0: interrupt-controller {
compatible = "ibm,uic";
interrupt-controller;
cell-index = <0>;
- dcr-reg = <0c0 9>;
+ dcr-reg = <0x0c0 0x009>;
#address-cells = <0>;
#size-cells = <0>;
#interrupt-cells = <2>;
SDRAM0: memory-controller {
compatible = "ibm,sdram-405gp";
- dcr-reg = <010 2>;
+ dcr-reg = <0x010 0x002>;
};
MAL: mcmal {
compatible = "ibm,mcmal-405gp", "ibm,mcmal";
- dcr-reg = <180 62>;
+ dcr-reg = <0x180 0x062>;
num-tx-chans = <1>;
num-rx-chans = <1>;
interrupt-parent = <&UIC0>;
interrupts = <
- b 4 /* TXEOB */
- c 4 /* RXEOB */
- a 4 /* SERR */
- d 4 /* TXDE */
- e 4 /* RXDE */>;
+ 0xb 0x4 /* TXEOB */
+ 0xc 0x4 /* RXEOB */
+ 0xa 0x4 /* SERR */
+ 0xd 0x4 /* TXDE */
+ 0xe 0x4 /* RXDE */>;
};
POB0: opb {
compatible = "ibm,opb-405gp", "ibm,opb";
#address-cells = <1>;
#size-cells = <1>;
- ranges = <ef600000 ef600000 a00000>;
- dcr-reg = <0a0 5>;
+ ranges = <0xef600000 0xef600000 0x00a00000>;
+ dcr-reg = <0x0a0 0x005>;
clock-frequency = <0>; /* Filled in by zImage */
UART0: serial@ef600300 {
device_type = "serial";
compatible = "ns16550";
- reg = <ef600300 8>;
- virtual-reg = <ef600300>;
+ reg = <0xef600300 0x00000008>;
+ virtual-reg = <0xef600300>;
clock-frequency = <0>; /* Filled in by zImage */
- current-speed = <2580>;
+ current-speed = <9600>;
interrupt-parent = <&UIC0>;
- interrupts = <0 4>;
+ interrupts = <0x0 0x4>;
};
UART1: serial@ef600400 {
device_type = "serial";
compatible = "ns16550";
- reg = <ef600400 8>;
- virtual-reg = <ef600400>;
+ reg = <0xef600400 0x00000008>;
+ virtual-reg = <0xef600400>;
clock-frequency = <0>; /* Filled in by zImage */
- current-speed = <2580>;
+ current-speed = <9600>;
interrupt-parent = <&UIC0>;
- interrupts = <1 4>;
+ interrupts = <0x1 0x4>;
};
IIC: i2c@ef600500 {
compatible = "ibm,iic-405gp", "ibm,iic";
- reg = <ef600500 11>;
+ reg = <0xef600500 0x00000011>;
interrupt-parent = <&UIC0>;
- interrupts = <2 4>;
+ interrupts = <0x2 0x4>;
};
GPIO: gpio@ef600700 {
compatible = "ibm,gpio-405gp";
- reg = <ef600700 20>;
+ reg = <0xef600700 0x00000020>;
};
EMAC: ethernet@ef600800 {
compatible = "ibm,emac-405gp", "ibm,emac";
interrupt-parent = <&UIC0>;
interrupts = <
- f 4 /* Ethernet */
- 9 4 /* Ethernet Wake Up */>;
+ 0xf 0x4 /* Ethernet */
+ 0x9 0x4 /* Ethernet Wake Up */>;
local-mac-address = [000000000000]; /* Filled in by zImage */
- reg = <ef600800 70>;
+ reg = <0xef600800 0x00000070>;
mal-device = <&MAL>;
mal-tx-channel = <0>;
mal-rx-channel = <0>;
cell-index = <0>;
- max-frame-size = <5dc>;
- rx-fifo-size = <1000>;
- tx-fifo-size = <800>;
+ max-frame-size = <1500>;
+ rx-fifo-size = <4096>;
+ tx-fifo-size = <2048>;
phy-mode = "rmii";
- phy-map = <00000001>;
+ phy-map = <0x00000001>;
};
};
EBC0: ebc {
compatible = "ibm,ebc-405gp", "ibm,ebc";
- dcr-reg = <012 2>;
+ dcr-reg = <0x012 0x002>;
#address-cells = <2>;
#size-cells = <1>;
/* The ranges property is supplied by the bootwrapper
clock-frequency = <0>; /* Filled in by zImage */
sram@0,0 {
- reg = <0 0 80000>;
+ reg = <0x00000000 0x00000000 0x00080000>;
};
flash@0,80000 {
compatible = "jedec-flash";
bank-width = <1>;
- reg = <0 80000 80000>;
+ reg = <0x00000000 0x00080000 0x00080000>;
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "OpenBIOS";
- reg = <0 80000>;
+ reg = <0x00000000 0x00080000>;
read-only;
};
};
nvram@1,0 {
/* NVRAM and RTC */
compatible = "ds1743-nvram";
- #bytes = <2000>;
- reg = <1 0 2000>;
+ #bytes = <0x2000>;
+ reg = <0x00000001 0x00000000 0x00002000>;
};
keyboard@2,0 {
compatible = "intel,82C42PC";
- reg = <2 0 2>;
+ reg = <0x00000002 0x00000000 0x00000002>;
};
ir@3,0 {
compatible = "ti,TIR2000PAG";
- reg = <3 0 10>;
+ reg = <0x00000003 0x00000000 0x00000010>;
};
fpga@7,0 {
compatible = "Walnut-FPGA";
- reg = <7 0 10>;
- virtual-reg = <f0300005>;
+ reg = <0x00000007 0x00000000 0x00000010>;
+ virtual-reg = <0xf0300005>;
};
};
#address-cells = <3>;
compatible = "ibm,plb405gp-pci", "ibm,plb-pci";
primary;
- reg = <eec00000 8 /* Config space access */
- eed80000 4 /* IACK */
- eed80000 4 /* Special cycle */
- ef480000 40>; /* Internal registers */
+ reg = <0xeec00000 0x00000008 /* Config space access */
+ 0xeed80000 0x00000004 /* IACK */
+ 0xeed80000 0x00000004 /* Special cycle */
+ 0xef480000 0x00000040>; /* Internal registers */
/* Outbound ranges, one memory and one IO,
* later cannot be changed. Chip supports a second
* IO range but we don't use it for now
*/
- ranges = <02000000 0 80000000 80000000 0 20000000
- 01000000 0 00000000 e8000000 0 00010000>;
+ ranges = <0x02000000 0x00000000 0x80000000 0x80000000 0x00000000 0x20000000
+ 0x01000000 0x00000000 0x00000000 0xe8000000 0x00000000 0x00010000>;
/* Inbound 2GB range starting at 0 */
- dma-ranges = <42000000 0 0 0 0 80000000>;
+ dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x80000000>;
/* Walnut has all 4 IRQ pins tied together per slot */
- interrupt-map-mask = <f800 0 0 0>;
+ interrupt-map-mask = <0xf800 0x0 0x0 0x0>;
interrupt-map = <
/* IDSEL 1 */
- 0800 0 0 0 &UIC0 1c 8
+ 0x800 0x0 0x0 0x0 &UIC0 0x1c 0x8
/* IDSEL 2 */
- 1000 0 0 0 &UIC0 1d 8
+ 0x1000 0x0 0x0 0x0 &UIC0 0x1d 0x8
/* IDSEL 3 */
- 1800 0 0 0 &UIC0 1e 8
+ 0x1800 0x0 0x0 0x0 &UIC0 0x1e 0x8
/* IDSEL 4 */
- 2000 0 0 0 &UIC0 1f 8
+ 0x2000 0x0 0x0 0x0 &UIC0 0x1f 0x8
>;
};
};
* any warranty of any kind, whether express or implied.
*/
+/dts-v1/;
+
/ {
#address-cells = <2>;
#size-cells = <1>;
model = "pika,warp";
compatible = "pika,warp";
- dcr-parent = <&/cpus/cpu@0>;
+ dcr-parent = <&{/cpus/cpu@0}>;
aliases {
ethernet0 = &EMAC0;
cpu@0 {
device_type = "cpu";
model = "PowerPC,440EP";
- reg = <0>;
+ reg = <0x00000000>;
clock-frequency = <0>; /* Filled in by zImage */
timebase-frequency = <0>; /* Filled in by zImage */
- i-cache-line-size = <20>;
- d-cache-line-size = <20>;
- i-cache-size = <8000>;
- d-cache-size = <8000>;
+ i-cache-line-size = <32>;
+ d-cache-line-size = <32>;
+ i-cache-size = <32768>;
+ d-cache-size = <32768>;
dcr-controller;
dcr-access-method = "native";
};
memory {
device_type = "memory";
- reg = <0 0 0>; /* Filled in by zImage */
+ reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by zImage */
};
UIC0: interrupt-controller0 {
compatible = "ibm,uic-440ep","ibm,uic";
interrupt-controller;
cell-index = <0>;
- dcr-reg = <0c0 009>;
+ dcr-reg = <0x0c0 0x009>;
#address-cells = <0>;
#size-cells = <0>;
#interrupt-cells = <2>;
compatible = "ibm,uic-440ep","ibm,uic";
interrupt-controller;
cell-index = <1>;
- dcr-reg = <0d0 009>;
+ dcr-reg = <0x0d0 0x009>;
#address-cells = <0>;
#size-cells = <0>;
#interrupt-cells = <2>;
- interrupts = <1e 4 1f 4>; /* cascade */
+ interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
interrupt-parent = <&UIC0>;
};
SDR0: sdr {
compatible = "ibm,sdr-440ep";
- dcr-reg = <00e 002>;
+ dcr-reg = <0x00e 0x002>;
};
CPR0: cpr {
compatible = "ibm,cpr-440ep";
- dcr-reg = <00c 002>;
+ dcr-reg = <0x00c 0x002>;
};
plb {
SDRAM0: sdram {
compatible = "ibm,sdram-440ep", "ibm,sdram-405gp";
- dcr-reg = <010 2>;
+ dcr-reg = <0x010 0x002>;
};
DMA0: dma {
compatible = "ibm,dma-440ep", "ibm,dma-440gp";
- dcr-reg = <100 027>;
+ dcr-reg = <0x100 0x027>;
};
MAL0: mcmal {
compatible = "ibm,mcmal-440ep", "ibm,mcmal-440gp", "ibm,mcmal";
- dcr-reg = <180 62>;
+ dcr-reg = <0x180 0x062>;
num-tx-chans = <4>;
num-rx-chans = <2>;
interrupt-parent = <&MAL0>;
- interrupts = <0 1 2 3 4>;
+ interrupts = <0x0 0x1 0x2 0x3 0x4>;
#interrupt-cells = <1>;
#address-cells = <0>;
#size-cells = <0>;
- interrupt-map = </*TXEOB*/ 0 &UIC0 a 4
- /*RXEOB*/ 1 &UIC0 b 4
- /*SERR*/ 2 &UIC1 0 4
- /*TXDE*/ 3 &UIC1 1 4
- /*RXDE*/ 4 &UIC1 2 4>;
+ interrupt-map = </*TXEOB*/ 0x0 &UIC0 0xa 0x4
+ /*RXEOB*/ 0x1 &UIC0 0xb 0x4
+ /*SERR*/ 0x2 &UIC1 0x0 0x4
+ /*TXDE*/ 0x3 &UIC1 0x1 0x4
+ /*RXDE*/ 0x4 &UIC1 0x2 0x4>;
};
POB0: opb {
compatible = "ibm,opb-440ep", "ibm,opb-440gp", "ibm,opb";
#address-cells = <1>;
#size-cells = <1>;
- ranges = <00000000 0 00000000 80000000
- 80000000 0 80000000 80000000>;
+ ranges = <0x00000000 0x00000000 0x00000000 0x80000000
+ 0x80000000 0x00000000 0x80000000 0x80000000>;
interrupt-parent = <&UIC1>;
- interrupts = <7 4>;
+ interrupts = <0x7 0x4>;
clock-frequency = <0>; /* Filled in by zImage */
EBC0: ebc {
compatible = "ibm,ebc-440ep", "ibm,ebc-440gp", "ibm,ebc";
- dcr-reg = <012 2>;
+ dcr-reg = <0x012 0x002>;
#address-cells = <2>;
#size-cells = <1>;
clock-frequency = <0>; /* Filled in by zImage */
- interrupts = <5 1>;
+ interrupts = <0x5 0x1>;
interrupt-parent = <&UIC1>;
fpga@2,0 {
compatible = "pika,fpga";
- reg = <2 0 2200>;
- interrupts = <18 8>;
+ reg = <0x00000002 0x00000000 0x00001000>;
+ interrupts = <0x18 0x8>;
interrupt-parent = <&UIC0>;
};
+ fpga@2,4000 {
+ compatible = "pika,fpga-sd";
+ reg = <0x00000002 0x00004000 0x00000A00>;
+ };
+
nor_flash@0,0 {
- compatible = "amd,s29gl512n", "cfi-flash";
+ compatible = "amd,s29gl032a", "cfi-flash";
bank-width = <2>;
- reg = <0 0 4000000>;
+ reg = <0x00000000 0x00000000 0x00400000>;
#address-cells = <1>;
#size-cells = <1>;
- partition@0 {
- label = "kernel";
- reg = <0 180000>;
- };
- partition@180000 {
- label = "root";
- reg = <180000 3480000>;
- };
- partition@3600000 {
- label = "user";
- reg = <3600000 900000>;
- };
- partition@3f00000 {
+ partition@300000 {
label = "fpga";
- reg = <3f00000 40000>;
+ reg = <0x0030000 0x00040000>;
};
- partition@3f40000 {
+ partition@340000 {
label = "env";
- reg = <3f40000 40000>;
+ reg = <0x0340000 0x00040000>;
};
- partition@3f80000 {
+ partition@380000 {
label = "u-boot";
- reg = <3f80000 80000>;
+ reg = <0x0380000 0x00080000>;
};
};
};
UART0: serial@ef600300 {
device_type = "serial";
compatible = "ns16550";
- reg = <ef600300 8>;
- virtual-reg = <ef600300>;
+ reg = <0xef600300 0x00000008>;
+ virtual-reg = <0xef600300>;
clock-frequency = <0>; /* Filled in by zImage */
- current-speed = <1c200>;
+ current-speed = <115200>;
interrupt-parent = <&UIC0>;
- interrupts = <0 4>;
+ interrupts = <0x0 0x4>;
};
IIC0: i2c@ef600700 {
compatible = "ibm,iic-440ep", "ibm,iic-440gp", "ibm,iic";
- reg = <ef600700 14>;
+ reg = <0xef600700 0x00000014>;
interrupt-parent = <&UIC0>;
- interrupts = <2 4>;
+ interrupts = <0x2 0x4>;
+ index = <0x0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ad7414@4a {
+ compatible = "adi,ad7414";
+ reg = <0x4a>;
+ interrupts = <0x19 0x8>;
+ interrupt-parent = <&UIC0>;
+ };
};
GPIO0: gpio@ef600b00 {
compatible = "ibm,gpio-440ep";
- reg = <ef600b00 48>;
+ reg = <0xef600b00 0x00000048>;
+ #gpio-cells = <2>;
+ gpio-controller;
};
GPIO1: gpio@ef600c00 {
compatible = "ibm,gpio-440ep";
- reg = <ef600c00 48>;
+ reg = <0xef600c00 0x00000048>;
+ #gpio-cells = <2>;
+ gpio-controller;
+
+ led@31 {
+ compatible = "linux,gpio-led";
+ linux,name = ":green:";
+ gpios = <&GPIO1 0x30 0>;
+ };
};
ZMII0: emac-zmii@ef600d00 {
compatible = "ibm,zmii-440ep", "ibm,zmii-440gp", "ibm,zmii";
- reg = <ef600d00 c>;
+ reg = <0xef600d00 0x0000000c>;
};
EMAC0: ethernet@ef600e00 {
device_type = "network";
compatible = "ibm,emac-440ep", "ibm,emac-440gp", "ibm,emac";
interrupt-parent = <&UIC1>;
- interrupts = <1c 4 1d 4>;
- reg = <ef600e00 70>;
+ interrupts = <0x1c 0x4 0x1d 0x4>;
+ reg = <0xef600e00 0x00000070>;
local-mac-address = [000000000000];
mal-device = <&MAL0>;
mal-tx-channel = <0 1>;
mal-rx-channel = <0>;
cell-index = <0>;
- max-frame-size = <5dc>;
- rx-fifo-size = <1000>;
- tx-fifo-size = <800>;
+ max-frame-size = <1500>;
+ rx-fifo-size = <4096>;
+ tx-fifo-size = <2048>;
phy-mode = "rmii";
- phy-map = <00000000>;
+ phy-map = <0x00000000>;
zmii-device = <&ZMII0>;
zmii-channel = <0>;
};
usb@ef601000 {
compatible = "ohci-be";
- reg = <ef601000 80>;
- interrupts = <8 1 9 1>;
+ reg = <0xef601000 0x00000080>;
+ interrupts = <0x8 0x1 0x9 0x1>;
interrupt-parent = < &UIC1 >;
};
};
* any warranty of any kind, whether express or implied.
*/
+/dts-v1/;
+
/ {
#address-cells = <2>;
#size-cells = <1>;
model = "amcc,yosemite";
compatible = "amcc,yosemite","amcc,bamboo";
- dcr-parent = <&/cpus/cpu@0>;
+ dcr-parent = <&{/cpus/cpu@0}>;
aliases {
ethernet0 = &EMAC0;
cpu@0 {
device_type = "cpu";
model = "PowerPC,440EP";
- reg = <0>;
+ reg = <0x00000000>;
clock-frequency = <0>; /* Filled in by zImage */
timebase-frequency = <0>; /* Filled in by zImage */
- i-cache-line-size = <20>;
- d-cache-line-size = <20>;
- i-cache-size = <8000>;
- d-cache-size = <8000>;
+ i-cache-line-size = <32>;
+ d-cache-line-size = <32>;
+ i-cache-size = <32768>;
+ d-cache-size = <32768>;
dcr-controller;
dcr-access-method = "native";
};
memory {
device_type = "memory";
- reg = <0 0 0>; /* Filled in by zImage */
+ reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by zImage */
};
UIC0: interrupt-controller0 {
compatible = "ibm,uic-440ep","ibm,uic";
interrupt-controller;
cell-index = <0>;
- dcr-reg = <0c0 009>;
+ dcr-reg = <0x0c0 0x009>;
#address-cells = <0>;
#size-cells = <0>;
#interrupt-cells = <2>;
compatible = "ibm,uic-440ep","ibm,uic";
interrupt-controller;
cell-index = <1>;
- dcr-reg = <0d0 009>;
+ dcr-reg = <0x0d0 0x009>;
#address-cells = <0>;
#size-cells = <0>;
#interrupt-cells = <2>;
- interrupts = <1e 4 1f 4>; /* cascade */
+ interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
interrupt-parent = <&UIC0>;
};
SDR0: sdr {
compatible = "ibm,sdr-440ep";
- dcr-reg = <00e 002>;
+ dcr-reg = <0x00e 0x002>;
};
CPR0: cpr {
compatible = "ibm,cpr-440ep";
- dcr-reg = <00c 002>;
+ dcr-reg = <0x00c 0x002>;
};
plb {
SDRAM0: sdram {
compatible = "ibm,sdram-440ep", "ibm,sdram-405gp";
- dcr-reg = <010 2>;
+ dcr-reg = <0x010 0x002>;
};
DMA0: dma {
compatible = "ibm,dma-440ep", "ibm,dma-440gp";
- dcr-reg = <100 027>;
+ dcr-reg = <0x100 0x027>;
};
MAL0: mcmal {
compatible = "ibm,mcmal-440ep", "ibm,mcmal-440gp", "ibm,mcmal";
- dcr-reg = <180 62>;
+ dcr-reg = <0x180 0x062>;
num-tx-chans = <4>;
num-rx-chans = <2>;
interrupt-parent = <&MAL0>;
- interrupts = <0 1 2 3 4>;
+ interrupts = <0x0 0x1 0x2 0x3 0x4>;
#interrupt-cells = <1>;
#address-cells = <0>;
#size-cells = <0>;
- interrupt-map = </*TXEOB*/ 0 &UIC0 a 4
- /*RXEOB*/ 1 &UIC0 b 4
- /*SERR*/ 2 &UIC1 0 4
- /*TXDE*/ 3 &UIC1 1 4
- /*RXDE*/ 4 &UIC1 2 4>;
+ interrupt-map = </*TXEOB*/ 0x0 &UIC0 0xa 0x4
+ /*RXEOB*/ 0x1 &UIC0 0xb 0x4
+ /*SERR*/ 0x2 &UIC1 0x0 0x4
+ /*TXDE*/ 0x3 &UIC1 0x1 0x4
+ /*RXDE*/ 0x4 &UIC1 0x2 0x4>;
};
POB0: opb {
/* Bamboo is oddball in the 44x world and doesn't use the ERPN
* bits.
*/
- ranges = <00000000 0 00000000 80000000
- 80000000 0 80000000 80000000>;
+ ranges = <0x00000000 0x00000000 0x00000000 0x80000000
+ 0x80000000 0x00000000 0x80000000 0x80000000>;
interrupt-parent = <&UIC1>;
- interrupts = <7 4>;
+ interrupts = <0x7 0x4>;
clock-frequency = <0>; /* Filled in by zImage */
EBC0: ebc {
compatible = "ibm,ebc-440ep", "ibm,ebc-440gp", "ibm,ebc";
- dcr-reg = <012 2>;
+ dcr-reg = <0x012 0x002>;
#address-cells = <2>;
#size-cells = <1>;
clock-frequency = <0>; /* Filled in by zImage */
- interrupts = <5 1>;
+ interrupts = <0x5 0x1>;
interrupt-parent = <&UIC1>;
};
UART0: serial@ef600300 {
device_type = "serial";
compatible = "ns16550";
- reg = <ef600300 8>;
- virtual-reg = <ef600300>;
+ reg = <0xef600300 0x00000008>;
+ virtual-reg = <0xef600300>;
clock-frequency = <0>; /* Filled in by zImage */
- current-speed = <1c200>;
+ current-speed = <115200>;
interrupt-parent = <&UIC0>;
- interrupts = <0 4>;
+ interrupts = <0x0 0x4>;
};
UART1: serial@ef600400 {
device_type = "serial";
compatible = "ns16550";
- reg = <ef600400 8>;
- virtual-reg = <ef600400>;
+ reg = <0xef600400 0x00000008>;
+ virtual-reg = <0xef600400>;
clock-frequency = <0>;
current-speed = <0>;
interrupt-parent = <&UIC0>;
- interrupts = <1 4>;
+ interrupts = <0x1 0x4>;
};
UART2: serial@ef600500 {
device_type = "serial";
compatible = "ns16550";
- reg = <ef600500 8>;
- virtual-reg = <ef600500>;
+ reg = <0xef600500 0x00000008>;
+ virtual-reg = <0xef600500>;
clock-frequency = <0>;
current-speed = <0>;
interrupt-parent = <&UIC0>;
- interrupts = <3 4>;
+ interrupts = <0x3 0x4>;
status = "disabled";
};
UART3: serial@ef600600 {
device_type = "serial";
compatible = "ns16550";
- reg = <ef600600 8>;
- virtual-reg = <ef600600>;
+ reg = <0xef600600 0x00000008>;
+ virtual-reg = <0xef600600>;
clock-frequency = <0>;
current-speed = <0>;
interrupt-parent = <&UIC0>;
- interrupts = <4 4>;
+ interrupts = <0x4 0x4>;
status = "disabled";
};
IIC0: i2c@ef600700 {
compatible = "ibm,iic-440ep", "ibm,iic-440gp", "ibm,iic";
- reg = <ef600700 14>;
+ reg = <0xef600700 0x00000014>;
interrupt-parent = <&UIC0>;
- interrupts = <2 4>;
+ interrupts = <0x2 0x4>;
};
IIC1: i2c@ef600800 {
compatible = "ibm,iic-440ep", "ibm,iic-440gp", "ibm,iic";
- reg = <ef600800 14>;
+ reg = <0xef600800 0x00000014>;
interrupt-parent = <&UIC0>;
- interrupts = <7 4>;
+ interrupts = <0x7 0x4>;
};
spi@ef600900 {
compatible = "amcc,spi-440ep";
- reg = <ef600900 6>;
- interrupts = <8 4>;
+ reg = <0xef600900 0x00000006>;
+ interrupts = <0x8 0x4>;
interrupt-parent = <&UIC0>;
};
ZMII0: emac-zmii@ef600d00 {
compatible = "ibm,zmii-440ep", "ibm,zmii-440gp", "ibm,zmii";
- reg = <ef600d00 c>;
+ reg = <0xef600d00 0x0000000c>;
};
EMAC0: ethernet@ef600e00 {
device_type = "network";
compatible = "ibm,emac-440ep", "ibm,emac-440gp", "ibm,emac";
interrupt-parent = <&UIC1>;
- interrupts = <1c 4 1d 4>;
- reg = <ef600e00 70>;
+ interrupts = <0x1c 0x4 0x1d 0x4>;
+ reg = <0xef600e00 0x00000070>;
local-mac-address = [000000000000];
mal-device = <&MAL0>;
mal-tx-channel = <0 1>;
mal-rx-channel = <0>;
cell-index = <0>;
- max-frame-size = <5dc>;
- rx-fifo-size = <1000>;
- tx-fifo-size = <800>;
+ max-frame-size = <1500>;
+ rx-fifo-size = <4096>;
+ tx-fifo-size = <2048>;
phy-mode = "rmii";
- phy-map = <00000000>;
+ phy-map = <0x00000000>;
zmii-device = <&ZMII0>;
zmii-channel = <0>;
};
device_type = "network";
compatible = "ibm,emac-440ep", "ibm,emac-440gp", "ibm,emac";
interrupt-parent = <&UIC1>;
- interrupts = <1e 4 1f 4>;
- reg = <ef600f00 70>;
+ interrupts = <0x1e 0x4 0x1f 0x4>;
+ reg = <0xef600f00 0x00000070>;
local-mac-address = [000000000000];
mal-device = <&MAL0>;
mal-tx-channel = <2 3>;
mal-rx-channel = <1>;
cell-index = <1>;
- max-frame-size = <5dc>;
- rx-fifo-size = <1000>;
- tx-fifo-size = <800>;
+ max-frame-size = <1500>;
+ rx-fifo-size = <4096>;
+ tx-fifo-size = <2048>;
phy-mode = "rmii";
- phy-map = <00000000>;
+ phy-map = <0x00000000>;
zmii-device = <&ZMII0>;
zmii-channel = <1>;
};
usb@ef601000 {
compatible = "ohci-be";
- reg = <ef601000 80>;
- interrupts = <8 4 9 4>;
+ reg = <0xef601000 0x00000080>;
+ interrupts = <0x8 0x4 0x9 0x4>;
interrupt-parent = < &UIC1 >;
};
};
#address-cells = <3>;
compatible = "ibm,plb440ep-pci", "ibm,plb-pci";
primary;
- reg = <0 eec00000 8 /* Config space access */
- 0 eed00000 4 /* IACK */
- 0 eed00000 4 /* Special cycle */
- 0 ef400000 40>; /* Internal registers */
+ reg = <0x00000000 0xeec00000 0x00000008 /* Config space access */
+ 0x00000000 0xeed00000 0x00000004 /* IACK */
+ 0x00000000 0xeed00000 0x00000004 /* Special cycle */
+ 0x00000000 0xef400000 0x00000040>; /* Internal registers */
/* Outbound ranges, one memory and one IO,
* later cannot be changed. Chip supports a second
* IO range but we don't use it for now
*/
- ranges = <02000000 0 a0000000 0 a0000000 0 20000000
- 01000000 0 00000000 0 e8000000 0 00010000>;
+ ranges = <0x02000000 0x00000000 0xa0000000 0x00000000 0xa0000000 0x00000000 0x20000000
+ 0x01000000 0x00000000 0x00000000 0x00000000 0xe8000000 0x00000000 0x00010000>;
/* Inbound 2GB range starting at 0 */
- dma-ranges = <42000000 0 0 0 0 0 80000000>;
+ dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
/* Bamboo has all 4 IRQ pins tied together per slot */
- interrupt-map-mask = <f800 0 0 0>;
+ interrupt-map-mask = <0xf800 0x0 0x0 0x0>;
interrupt-map = <
/* IDSEL 1 */
- 0800 0 0 0 &UIC0 1c 8
+ 0x800 0x0 0x0 0x0 &UIC0 0x1c 0x8
/* IDSEL 2 */
- 1000 0 0 0 &UIC0 1b 8
+ 0x1000 0x0 0x0 0x0 &UIC0 0x1b 0x8
/* IDSEL 3 */
- 1800 0 0 0 &UIC0 1a 8
+ 0x1800 0x0 0x0 0x0 &UIC0 0x1a 0x8
/* IDSEL 4 */
- 2000 0 0 0 &UIC0 19 8
+ 0x2000 0x0 0x0 0x0 &UIC0 0x19 0x8
>;
};
};
--- /dev/null
+/*
+ * RedBoot firmware support
+ *
+ * Author: Scott Wood <scottwood@freescale.com>
+ *
+ * Copyright (c) 2007 Freescale Semiconductor, Inc.
+ * Copyright (c) 2008 Codehermit
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include "ops.h"
+#include "stdio.h"
+#include "redboot.h"
+#include "fsl-soc.h"
+#include "io.h"
+
+static bd_t bd;
+BSS_STACK(4096);
+
+#define MHZ(x) ((x + 500000) / 1000000)
+
+static void platform_fixups(void)
+{
+ void *node;
+
+ dt_fixup_memory(bd.bi_memstart, bd.bi_memsize);
+ dt_fixup_mac_addresses(bd.bi_enetaddr);
+ dt_fixup_cpu_clocks(bd.bi_intfreq, bd.bi_busfreq / 16, bd.bi_busfreq);
+
+ node = finddevice("/soc/cpm/brg");
+ if (node) {
+ printf("BRG clock-frequency <- 0x%x (%dMHz)\r\n",
+ bd.bi_busfreq, MHZ(bd.bi_busfreq));
+ setprop(node, "clock-frequency", &bd.bi_busfreq, 4);
+ }
+
+}
+
+void platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
+ unsigned long r6, unsigned long r7)
+{
+ memcpy(&bd, (char *)r3, sizeof(bd));
+
+ if (bd.bi_tag != 0x42444944)
+ return;
+
+ simple_alloc_init(_end,
+ bd.bi_memstart + bd.bi_memsize - (unsigned long)_end,
+ 32, 64);
+
+ fdt_init(_dtb_start);
+ serial_console_init();
+ platform_ops.fixups = platform_fixups;
+
+ loader_info.cmdline = (char *)bd.bi_cmdline;
+ loader_info.cmdline_len = strlen((char *)bd.bi_cmdline);
+}
*-mpc824*)
platformo=$object/cuboot-824x.o
;;
- *-mpc83*)
+ *-mpc83*|*-asp834x*)
platformo=$object/cuboot-83xx.o
;;
*-tqm8541|*-mpc8560*|*-tqm8560|*-tqm8555|*-ksi8560*)
platformo="$object/virtex405-head.o $object/simpleboot.o"
binary=y
;;
+asp834x-redboot)
+ platformo="$object/fixed-head.o $object/redboot-83xx.o"
+ binary=y
+ ;;
esac
vmz="$tmpdir/`basename \"$kernel\"`.$ext"
--- /dev/null
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.25-rc6
+# Tue May 6 02:21:00 2008
+#
+# CONFIG_PPC64 is not set
+
+#
+# Processor support
+#
+CONFIG_6xx=y
+# CONFIG_PPC_85xx is not set
+# CONFIG_PPC_8xx is not set
+# CONFIG_40x is not set
+# CONFIG_44x is not set
+# CONFIG_E200 is not set
+CONFIG_PPC_FPU=y
+CONFIG_FSL_EMB_PERFMON=y
+CONFIG_PPC_STD_MMU=y
+CONFIG_PPC_STD_MMU_32=y
+# CONFIG_PPC_MM_SLICES is not set
+# CONFIG_SMP is not set
+CONFIG_PPC32=y
+CONFIG_WORD_SIZE=32
+CONFIG_PPC_MERGE=y
+CONFIG_MMU=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+CONFIG_IRQ_PER_CPU=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
+CONFIG_PPC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+CONFIG_OF=y
+CONFIG_PPC_UDBG_16550=y
+# CONFIG_GENERIC_TBSYNC is not set
+CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
+# CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_REDBOOT=y
+# CONFIG_PPC_DCR_NATIVE is not set
+# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
+# CONFIG_FAIR_GROUP_SCHED is not set
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
+# CONFIG_KALLSYMS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+# CONFIG_EPOLL is not set
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+# CONFIG_KMOD is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
+
+#
+# Platform support
+#
+# CONFIG_PPC_MULTIPLATFORM is not set
+# CONFIG_PPC_82xx is not set
+CONFIG_PPC_83xx=y
+# CONFIG_PPC_86xx is not set
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
+# CONFIG_PPC_CELL is not set
+# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PQ2ADS is not set
+CONFIG_MPC83xx=y
+# CONFIG_MPC831x_RDB is not set
+# CONFIG_MPC832x_MDS is not set
+# CONFIG_MPC832x_RDB is not set
+# CONFIG_MPC834x_MDS is not set
+# CONFIG_MPC834x_ITX is not set
+# CONFIG_MPC836x_MDS is not set
+# CONFIG_MPC837x_MDS is not set
+# CONFIG_MPC837x_RDB is not set
+# CONFIG_SBC834x is not set
+CONFIG_ASP834x=y
+CONFIG_PPC_MPC834x=y
+CONFIG_IPIC=y
+# CONFIG_MPIC is not set
+# CONFIG_MPIC_WEIRD is not set
+# CONFIG_PPC_I8259 is not set
+# CONFIG_PPC_RTAS is not set
+# CONFIG_MMIO_NVRAM is not set
+# CONFIG_PPC_MPC106 is not set
+# CONFIG_PPC_970_NAP is not set
+# CONFIG_PPC_INDIRECT_IO is not set
+# CONFIG_GENERIC_IOMAP is not set
+# CONFIG_CPU_FREQ is not set
+# CONFIG_FSL_ULI1575 is not set
+
+#
+# Kernel options
+#
+# CONFIG_HIGHMEM is not set
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_IOMMU_HELPER is not set
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_PROC_DEVICETREE=y
+# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_PM is not set
+CONFIG_SECCOMP=y
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+CONFIG_ZONE_DMA=y
+CONFIG_GENERIC_ISA_DMA=y
+CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_FSL_SOC=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_SYSCALL=y
+# CONFIG_PCIEPORTBUS is not set
+CONFIG_ARCH_SUPPORTS_MSI=y
+# CONFIG_PCI_MSI is not set
+CONFIG_PCI_LEGACY=y
+# CONFIG_PCCARD is not set
+# CONFIG_HOTPLUG_PCI is not set
+
+#
+# Advanced setup
+#
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_HIGHMEM_START=0xfe000000
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_TASK_SIZE=0xc0000000
+CONFIG_BOOT_LOAD=0x00800000
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+CONFIG_MTD_REDBOOT_PARTS=y
+CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
+CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
+# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+CONFIG_MTD_OF_PARTS=y
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_PHYSMAP_OF=y
+# CONFIG_MTD_INTEL_VR_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+CONFIG_OF_DEVICE=y
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=32768
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
+# CONFIG_MACINTOSH_DRIVERS is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_ARCNET is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_NET_PCI is not set
+# CONFIG_B44 is not set
+CONFIG_NETDEV_1000=y
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_SK98LIN is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+CONFIG_GIANFAR=y
+# CONFIG_GFAR_NAPI is not set
+# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_TR is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_UARTLITE is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_OF_PLATFORM is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_NVRAM is not set
+CONFIG_GEN_RTC=y
+# CONFIG_GEN_RTC_X is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Algorithms
+#
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_PIIX4 is not set
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_PROSAVAGE is not set
+# CONFIG_I2C_SAVAGE4 is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_TINY_USB is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+# CONFIG_I2C_VOODOO3 is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_I5K_AMB is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SIS5595 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_VIA686A is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_VT8231 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+CONFIG_THERMAL=y
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_83xx_WDT=y
+
+#
+# PCI-based Watchdog Cards
+#
+# CONFIG_PCIPCWATCHDOG is not set
+# CONFIG_WDTPCI is not set
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+CONFIG_DAB=y
+# CONFIG_USB_DABUSB is not set
+
+#
+# Graphics support
+#
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+CONFIG_USB_EHCI_FSL=y
+CONFIG_USB_EHCI_HCD_PPC_OF=y
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_OHCI_HCD is not set
+# CONFIG_USB_UHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_GADGET is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_INFINIBAND is not set
+# CONFIG_EDAC is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+
+#
+# Conflicting RTC option has been selected, check GEN_RTC and RTC
+#
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+CONFIG_RTC_DRV_DS1374=y
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_DMADEVICES is not set
+
+#
+# Userspace I/O
+#
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+# CONFIG_SUNRPC_BIND34 is not set
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+# CONFIG_MSDOS_PARTITION is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_SAMPLES is not set
+# CONFIG_PPC_EARLY_DEBUG is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+# CONFIG_CRYPTO_SEQIV is not set
+CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_TEST is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_PPC_CLOCK is not set
#include <asm/iseries/alpaca.h>
#endif
+#if defined(CONFIG_BOOKE) || defined(CONFIG_40x)
+#include "head_booke.h"
+#endif
+
int main(void)
{
DEFINE(THREAD, offsetof(struct task_struct, thread));
DEFINE(_SRR1, STACK_FRAME_OVERHEAD+sizeof(struct pt_regs)+8);
#endif /* CONFIG_PPC64 */
+#if defined(CONFIG_BOOKE) || defined(CONFIG_40x)
+ DEFINE(EXC_LVL_SIZE, STACK_EXC_LVL_FRAME_SIZE);
+ DEFINE(MAS0, STACK_INT_FRAME_SIZE+offsetof(struct exception_regs, mas0));
+ /* we overload MMUCR for 44x on MAS0 since they are mutually exclusive */
+ DEFINE(MMUCR, STACK_INT_FRAME_SIZE+offsetof(struct exception_regs, mas0));
+ DEFINE(MAS1, STACK_INT_FRAME_SIZE+offsetof(struct exception_regs, mas1));
+ DEFINE(MAS2, STACK_INT_FRAME_SIZE+offsetof(struct exception_regs, mas2));
+ DEFINE(MAS3, STACK_INT_FRAME_SIZE+offsetof(struct exception_regs, mas3));
+ DEFINE(MAS6, STACK_INT_FRAME_SIZE+offsetof(struct exception_regs, mas6));
+ DEFINE(MAS7, STACK_INT_FRAME_SIZE+offsetof(struct exception_regs, mas7));
+ DEFINE(_SRR0, STACK_INT_FRAME_SIZE+offsetof(struct exception_regs, srr0));
+ DEFINE(_SRR1, STACK_INT_FRAME_SIZE+offsetof(struct exception_regs, srr1));
+ DEFINE(_CSRR0, STACK_INT_FRAME_SIZE+offsetof(struct exception_regs, csrr0));
+ DEFINE(_CSRR1, STACK_INT_FRAME_SIZE+offsetof(struct exception_regs, csrr1));
+ DEFINE(_DSRR0, STACK_INT_FRAME_SIZE+offsetof(struct exception_regs, dsrr0));
+ DEFINE(_DSRR1, STACK_INT_FRAME_SIZE+offsetof(struct exception_regs, dsrr1));
+ DEFINE(SAVED_KSP_LIMIT, STACK_INT_FRAME_SIZE+offsetof(struct exception_regs, saved_ksp_limit));
+#endif
+
DEFINE(CLONE_VM, CLONE_VM);
DEFINE(CLONE_UNTRACED, CLONE_UNTRACED);
#endif
#ifdef CONFIG_BOOKE
-#include "head_booke.h"
-#define TRANSFER_TO_HANDLER_EXC_LEVEL(exc_level) \
- mtspr exc_level##_SPRG,r8; \
- BOOKE_LOAD_EXC_LEVEL_STACK(exc_level); \
- lwz r0,GPR10-INT_FRAME_SIZE(r8); \
- stw r0,GPR10(r11); \
- lwz r0,GPR11-INT_FRAME_SIZE(r8); \
- stw r0,GPR11(r11); \
- mfspr r8,exc_level##_SPRG
-
.globl mcheck_transfer_to_handler
mcheck_transfer_to_handler:
- TRANSFER_TO_HANDLER_EXC_LEVEL(MCHECK)
- b transfer_to_handler_full
+ mfspr r0,SPRN_DSRR0
+ stw r0,_DSRR0(r11)
+ mfspr r0,SPRN_DSRR1
+ stw r0,_DSRR1(r11)
+ /* fall through */
.globl debug_transfer_to_handler
debug_transfer_to_handler:
- TRANSFER_TO_HANDLER_EXC_LEVEL(DEBUG)
- b transfer_to_handler_full
+ mfspr r0,SPRN_CSRR0
+ stw r0,_CSRR0(r11)
+ mfspr r0,SPRN_CSRR1
+ stw r0,_CSRR1(r11)
+ /* fall through */
.globl crit_transfer_to_handler
crit_transfer_to_handler:
- TRANSFER_TO_HANDLER_EXC_LEVEL(CRIT)
+#ifdef CONFIG_FSL_BOOKE
+ mfspr r0,SPRN_MAS0
+ stw r0,MAS0(r11)
+ mfspr r0,SPRN_MAS1
+ stw r0,MAS1(r11)
+ mfspr r0,SPRN_MAS2
+ stw r0,MAS2(r11)
+ mfspr r0,SPRN_MAS3
+ stw r0,MAS3(r11)
+ mfspr r0,SPRN_MAS6
+ stw r0,MAS6(r11)
+#ifdef CONFIG_PHYS_64BIT
+ mfspr r0,SPRN_MAS7
+ stw r0,MAS7(r11)
+#endif /* CONFIG_PHYS_64BIT */
+#endif /* CONFIG_FSL_BOOKE */
+#ifdef CONFIG_44x
+ mfspr r0,SPRN_MMUCR
+ stw r0,MMUCR(r11)
+#endif
+ mfspr r0,SPRN_SRR0
+ stw r0,_SRR0(r11)
+ mfspr r0,SPRN_SRR1
+ stw r0,_SRR1(r11)
+
+ mfspr r8,SPRN_SPRG3
+ lwz r0,KSP_LIMIT(r8)
+ stw r0,SAVED_KSP_LIMIT(r11)
+ rlwimi r0,r1,0,0,(31-THREAD_SHIFT)
+ stw r0,KSP_LIMIT(r8)
/* fall through */
#endif
stw r0,GPR10(r11)
lwz r0,crit_r11@l(0)
stw r0,GPR11(r11)
+ mfspr r0,SPRN_SRR0
+ stw r0,crit_srr0@l(0)
+ mfspr r0,SPRN_SRR1
+ stw r0,crit_srr1@l(0)
+
+ mfspr r8,SPRN_SPRG3
+ lwz r0,KSP_LIMIT(r8)
+ stw r0,saved_ksp_limit@l(0)
+ rlwimi r0,r1,0,0,(31-THREAD_SHIFT)
+ stw r0,KSP_LIMIT(r8)
/* fall through */
#endif
lwz r12,TI_LOCAL_FLAGS(r9)
mtcrf 0x01,r12
bt- 31-TLF_NAPPING,4f
+ bt- 31-TLF_SLEEPING,7f
#endif /* CONFIG_6xx */
.globl transfer_to_handler_cont
transfer_to_handler_cont:
4: rlwinm r12,r12,0,~_TLF_NAPPING
stw r12,TI_LOCAL_FLAGS(r9)
b power_save_6xx_restore
+
+7: rlwinm r12,r12,0,~_TLF_SLEEPING
+ stw r12,TI_LOCAL_FLAGS(r9)
+ lwz r9,_MSR(r11) /* if sleeping, clear MSR.EE */
+ rlwinm r9,r9,0,~MSR_EE
+ lwz r12,_LINK(r11) /* and return to address in LR */
+ b fast_exception_return
#endif
/*
/* Check current_thread_info()->flags */
rlwinm r9,r1,0,0,(31-THREAD_SHIFT)
lwz r9,TI_FLAGS(r9)
- andi. r0,r9,(_TIF_SIGPENDING|_TIF_RESTORE_SIGMASK|_TIF_NEED_RESCHED)
+ andi. r0,r9,_TIF_USER_WORK_MASK
bne do_work
restore_user:
exc_lvl_rfi; \
b .; /* prevent prefetch past exc_lvl_rfi */
+#define RESTORE_xSRR(exc_lvl_srr0, exc_lvl_srr1) \
+ lwz r9,_##exc_lvl_srr0(r1); \
+ lwz r10,_##exc_lvl_srr1(r1); \
+ mtspr SPRN_##exc_lvl_srr0,r9; \
+ mtspr SPRN_##exc_lvl_srr1,r10;
+
+#if defined(CONFIG_FSL_BOOKE)
+#ifdef CONFIG_PHYS_64BIT
+#define RESTORE_MAS7 \
+ lwz r11,MAS7(r1); \
+ mtspr SPRN_MAS7,r11;
+#else
+#define RESTORE_MAS7
+#endif /* CONFIG_PHYS_64BIT */
+#define RESTORE_MMU_REGS \
+ lwz r9,MAS0(r1); \
+ lwz r10,MAS1(r1); \
+ lwz r11,MAS2(r1); \
+ mtspr SPRN_MAS0,r9; \
+ lwz r9,MAS3(r1); \
+ mtspr SPRN_MAS1,r10; \
+ lwz r10,MAS6(r1); \
+ mtspr SPRN_MAS2,r11; \
+ mtspr SPRN_MAS3,r9; \
+ mtspr SPRN_MAS6,r10; \
+ RESTORE_MAS7;
+#elif defined(CONFIG_44x)
+#define RESTORE_MMU_REGS \
+ lwz r9,MMUCR(r1); \
+ mtspr SPRN_MMUCR,r9;
+#else
+#define RESTORE_MMU_REGS
+#endif
+
+#ifdef CONFIG_40x
.globl ret_from_crit_exc
ret_from_crit_exc:
+ mfspr r9,SPRN_SPRG3
+ lis r10,saved_ksp_limit@ha;
+ lwz r10,saved_ksp_limit@l(r10);
+ tovirt(r9,r9);
+ stw r10,KSP_LIMIT(r9)
+ lis r9,crit_srr0@ha;
+ lwz r9,crit_srr0@l(r9);
+ lis r10,crit_srr1@ha;
+ lwz r10,crit_srr1@l(r10);
+ mtspr SPRN_SRR0,r9;
+ mtspr SPRN_SRR1,r10;
RET_FROM_EXC_LEVEL(SPRN_CSRR0, SPRN_CSRR1, RFCI)
+#endif /* CONFIG_40x */
#ifdef CONFIG_BOOKE
+ .globl ret_from_crit_exc
+ret_from_crit_exc:
+ mfspr r9,SPRN_SPRG3
+ lwz r10,SAVED_KSP_LIMIT(r1)
+ stw r10,KSP_LIMIT(r9)
+ RESTORE_xSRR(SRR0,SRR1);
+ RESTORE_MMU_REGS;
+ RET_FROM_EXC_LEVEL(SPRN_CSRR0, SPRN_CSRR1, RFCI)
+
.globl ret_from_debug_exc
ret_from_debug_exc:
+ mfspr r9,SPRN_SPRG3
+ lwz r10,SAVED_KSP_LIMIT(r1)
+ stw r10,KSP_LIMIT(r9)
+ lwz r9,THREAD_INFO-THREAD(r9)
+ rlwinm r10,r1,0,0,(31-THREAD_SHIFT)
+ lwz r10,TI_PREEMPT(r10)
+ stw r10,TI_PREEMPT(r9)
+ RESTORE_xSRR(SRR0,SRR1);
+ RESTORE_xSRR(CSRR0,CSRR1);
+ RESTORE_MMU_REGS;
RET_FROM_EXC_LEVEL(SPRN_DSRR0, SPRN_DSRR1, RFDI)
.globl ret_from_mcheck_exc
ret_from_mcheck_exc:
+ mfspr r9,SPRN_SPRG3
+ lwz r10,SAVED_KSP_LIMIT(r1)
+ stw r10,KSP_LIMIT(r9)
+ RESTORE_xSRR(SRR0,SRR1);
+ RESTORE_xSRR(CSRR0,CSRR1);
+ RESTORE_xSRR(DSRR0,DSRR1);
+ RESTORE_MMU_REGS;
RET_FROM_EXC_LEVEL(SPRN_MCSRR0, SPRN_MCSRR1, RFMCI)
#endif /* CONFIG_BOOKE */
lwz r9,TI_FLAGS(r9)
andi. r0,r9,_TIF_NEED_RESCHED
bne- do_resched
- andi. r0,r9,_TIF_SIGPENDING|_TIF_RESTORE_SIGMASK
+ andi. r0,r9,_TIF_USER_WORK_MASK
beq restore_user
do_user_signal: /* r10 contains MSR_KERNEL here */
ori r10,r10,MSR_EE
.space 4
_ENTRY(crit_r11)
.space 4
+_ENTRY(crit_srr0)
+ .space 4
+_ENTRY(crit_srr1)
+ .space 4
+_ENTRY(saved_ksp_limit)
+ .space 4
/*
* Exception vector entry code. This code runs with address translation
mfcr r10; /* save CR in r10 for now */\
mfspr r11,SPRN_SRR3; /* check whether user or kernel */\
andi. r11,r11,MSR_PR; \
- lis r11,critical_stack_top@h; \
- ori r11,r11,critical_stack_top@l; \
+ lis r11,critirq_ctx@ha; \
+ tophys(r11,r11); \
+ lwz r11,critirq_ctx@l(r11); \
beq 1f; \
/* COMING FROM USER MODE */ \
mfspr r11,SPRN_SPRG3; /* if from user, start at top of */\
lwz r11,THREAD_INFO-THREAD(r11); /* this thread's kernel stack */\
- addi r11,r11,THREAD_SIZE; \
-1: subi r11,r11,INT_FRAME_SIZE; /* Allocate an exception frame */\
+1: addi r11,r11,THREAD_SIZE-INT_FRAME_SIZE; /* Alloc an excpt frm */\
tophys(r11,r11); \
stw r10,_CCR(r11); /* save various registers */\
stw r12,GPR12(r11); \
swapper_pg_dir:
.space PGD_TABLE_SIZE
-
-/* Stack for handling critical exceptions from kernel mode */
- .section .bss
- .align 12
-exception_stack_bottom:
- .space 4096
-critical_stack_top:
- .globl exception_stack_top
-exception_stack_top:
-
/* Room for two PTE pointers, usually the kernel and current user pointers
* to their respective root page table.
*/
swapper_pg_dir:
.space PGD_TABLE_SIZE
-/* Reserved 4k for the critical exception stack & 4k for the machine
- * check stack per CPU for kernel mode exceptions */
- .section .bss
- .align 12
-exception_stack_bottom:
- .space BOOKE_EXCEPTION_STACK_SIZE
- .globl exception_stack_top
-exception_stack_top:
-
/*
* Room for two PTE pointers, usually the kernel and current user pointers
* to their respective root page table.
SAVE_2GPRS(7, r11)
/* To handle the additional exception priority levels on 40x and Book-E
- * processors we allocate a 4k stack per additional priority level. The various
- * head_xxx.S files allocate space (exception_stack_top) for each priority's
- * stack times the number of CPUs
+ * processors we allocate a stack per additional priority level.
*
* On 40x critical is the only additional level
* On 44x/e500 we have critical and machine check
* going to critical or their own debug level we aren't currently
* providing configurations that micro-optimize space usage.
*/
-#ifdef CONFIG_44x
-#define NUM_EXCEPTION_LVLS 2
-#else
-#define NUM_EXCEPTION_LVLS 3
-#endif
-#define BOOKE_EXCEPTION_STACK_SIZE (4096 * NUM_EXCEPTION_LVLS)
/* CRIT_SPRG only used in critical exception handling */
#define CRIT_SPRG SPRN_SPRG2
/* MCHECK_SPRG only used in machine check exception handling */
#define MCHECK_SPRG SPRN_SPRG6W
-#define MCHECK_STACK_TOP (exception_stack_top - 4096)
-#define CRIT_STACK_TOP (exception_stack_top)
+#define MCHECK_STACK_BASE mcheckirq_ctx
+#define CRIT_STACK_BASE critirq_ctx
/* only on e200 for now */
-#define DEBUG_STACK_TOP (exception_stack_top - 8192)
+#define DEBUG_STACK_BASE dbgirq_ctx
#define DEBUG_SPRG SPRN_SPRG6W
+#define EXC_LVL_FRAME_OVERHEAD (THREAD_SIZE - INT_FRAME_SIZE - EXC_LVL_SIZE)
+
#ifdef CONFIG_SMP
#define BOOKE_LOAD_EXC_LEVEL_STACK(level) \
mfspr r8,SPRN_PIR; \
- mulli r8,r8,BOOKE_EXCEPTION_STACK_SIZE; \
- neg r8,r8; \
- addis r8,r8,level##_STACK_TOP@ha; \
- addi r8,r8,level##_STACK_TOP@l
+ slwi r8,r8,2; \
+ addis r8,r8,level##_STACK_BASE@ha; \
+ lwz r8,level##_STACK_BASE@l(r8); \
+ addi r8,r8,EXC_LVL_FRAME_OVERHEAD;
#else
#define BOOKE_LOAD_EXC_LEVEL_STACK(level) \
- lis r8,level##_STACK_TOP@h; \
- ori r8,r8,level##_STACK_TOP@l
+ lis r8,level##_STACK_BASE@ha; \
+ lwz r8,level##_STACK_BASE@l(r8); \
+ addi r8,r8,EXC_LVL_FRAME_OVERHEAD;
#endif
/*
#define EXC_LEVEL_EXCEPTION_PROLOG(exc_level, exc_level_srr0, exc_level_srr1) \
mtspr exc_level##_SPRG,r8; \
BOOKE_LOAD_EXC_LEVEL_STACK(exc_level);/* r8 points to the exc_level stack*/ \
- stw r10,GPR10-INT_FRAME_SIZE(r8); \
- stw r11,GPR11-INT_FRAME_SIZE(r8); \
- mfcr r10; /* save CR in r10 for now */\
- mfspr r11,exc_level_srr1; /* check whether user or kernel */\
- andi. r11,r11,MSR_PR; \
- mr r11,r8; \
- mfspr r8,exc_level##_SPRG; \
- beq 1f; \
- /* COMING FROM USER MODE */ \
+ stw r9,GPR9(r8); /* save various registers */\
+ mfcr r9; /* save CR in r9 for now */\
+ stw r10,GPR10(r8); \
+ stw r11,GPR11(r8); \
+ stw r9,_CCR(r8); /* save CR on stack */\
+ mfspr r10,exc_level_srr1; /* check whether user or kernel */\
+ andi. r10,r10,MSR_PR; \
mfspr r11,SPRN_SPRG3; /* if from user, start at top of */\
lwz r11,THREAD_INFO-THREAD(r11); /* this thread's kernel stack */\
- addi r11,r11,THREAD_SIZE; \
-1: subi r11,r11,INT_FRAME_SIZE; /* Allocate an exception frame */\
- stw r10,_CCR(r11); /* save various registers */\
- stw r12,GPR12(r11); \
+ addi r11,r11,EXC_LVL_FRAME_OVERHEAD; /* allocate stack frame */\
+ beq 1f; \
+ /* COMING FROM USER MODE */ \
+ stw r9,_CCR(r11); /* save CR */\
+ lwz r10,GPR10(r8); /* copy regs from exception stack */\
+ lwz r9,GPR9(r8); \
+ stw r10,GPR10(r11); \
+ lwz r10,GPR11(r8); \
stw r9,GPR9(r11); \
+ stw r10,GPR11(r11); \
+ b 2f; \
+ /* COMING FROM PRIV MODE */ \
+1: lwz r9,TI_FLAGS-EXC_LVL_FRAME_OVERHEAD(r11); \
+ lwz r10,TI_PREEMPT-EXC_LVL_FRAME_OVERHEAD(r11); \
+ stw r9,TI_FLAGS-EXC_LVL_FRAME_OVERHEAD(r8); \
+ stw r10,TI_PREEMPT-EXC_LVL_FRAME_OVERHEAD(r8); \
+ lwz r9,TI_TASK-EXC_LVL_FRAME_OVERHEAD(r11); \
+ stw r9,TI_TASK-EXC_LVL_FRAME_OVERHEAD(r8); \
+ mr r11,r8; \
+2: mfspr r8,exc_level##_SPRG; \
+ stw r12,GPR12(r11); /* save various registers */\
mflr r10; \
stw r10,_LINK(r11); \
mfspr r12,SPRN_DEAR; /* save DEAR and ESR in the frame */\
lwz r12,GPR12(r11); \
mtspr DEBUG_SPRG,r8; \
BOOKE_LOAD_EXC_LEVEL_STACK(DEBUG); /* r8 points to the debug stack */ \
- lwz r10,GPR10-INT_FRAME_SIZE(r8); \
- lwz r11,GPR11-INT_FRAME_SIZE(r8); \
+ lwz r10,GPR10(r8); \
+ lwz r11,GPR11(r8); \
mfspr r8,DEBUG_SPRG; \
\
RFDI; \
/* continue normal handling for a critical exception... */ \
2: mfspr r4,SPRN_DBSR; \
addi r3,r1,STACK_FRAME_OVERHEAD; \
- EXC_XFER_TEMPLATE(DebugException, 0x2002, (MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)), NOCOPY, debug_transfer_to_handler, ret_from_debug_exc)
+ EXC_XFER_TEMPLATE(DebugException, 0x2008, (MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)), NOCOPY, debug_transfer_to_handler, ret_from_debug_exc)
#define DEBUG_CRIT_EXCEPTION \
START_EXCEPTION(DebugCrit); \
lwz r12,GPR12(r11); \
mtspr CRIT_SPRG,r8; \
BOOKE_LOAD_EXC_LEVEL_STACK(CRIT); /* r8 points to the debug stack */ \
- lwz r10,GPR10-INT_FRAME_SIZE(r8); \
- lwz r11,GPR11-INT_FRAME_SIZE(r8); \
+ lwz r10,GPR10(r8); \
+ lwz r11,GPR11(r8); \
mfspr r8,CRIT_SPRG; \
\
rfci; \
addi r3,r1,STACK_FRAME_OVERHEAD; \
EXC_XFER_EE_LITE(0x800, kernel_fp_unavailable_exception)
+#ifndef __ASSEMBLY__
+struct exception_regs {
+ unsigned long mas0;
+ unsigned long mas1;
+ unsigned long mas2;
+ unsigned long mas3;
+ unsigned long mas6;
+ unsigned long mas7;
+ unsigned long srr0;
+ unsigned long srr1;
+ unsigned long csrr0;
+ unsigned long csrr1;
+ unsigned long dsrr0;
+ unsigned long dsrr1;
+ unsigned long saved_ksp_limit;
+};
+
+/* ensure this structure is always sized to a multiple of the stack alignment */
+#define STACK_EXC_LVL_FRAME_SIZE _ALIGN_UP(sizeof (struct exception_regs), 16)
+
+#endif /* __ASSEMBLY__ */
#endif /* __HEAD_BOOKE_H__ */
swapper_pg_dir:
.space PGD_TABLE_SIZE
-/* Reserved 4k for the critical exception stack & 4k for the machine
- * check stack per CPU for kernel mode exceptions */
- .section .bss
- .align 12
-exception_stack_bottom:
- .space BOOKE_EXCEPTION_STACK_SIZE * NR_CPUS
- .globl exception_stack_top
-exception_stack_top:
-
/*
* Room for two PTE pointers, usually the kernel and current user pointers
* to their respective root page table.
{
if (ppc_md.init_IRQ)
ppc_md.init_IRQ();
+
+ exc_lvl_ctx_init();
+
irq_ctx_init();
}
+#if defined(CONFIG_BOOKE) || defined(CONFIG_40x)
+struct thread_info *critirq_ctx[NR_CPUS] __read_mostly;
+struct thread_info *dbgirq_ctx[NR_CPUS] __read_mostly;
+struct thread_info *mcheckirq_ctx[NR_CPUS] __read_mostly;
+
+void exc_lvl_ctx_init(void)
+{
+ struct thread_info *tp;
+ int i;
+
+ for_each_possible_cpu(i) {
+ memset((void *)critirq_ctx[i], 0, THREAD_SIZE);
+ tp = critirq_ctx[i];
+ tp->cpu = i;
+ tp->preempt_count = 0;
+
+#ifdef CONFIG_BOOKE
+ memset((void *)dbgirq_ctx[i], 0, THREAD_SIZE);
+ tp = dbgirq_ctx[i];
+ tp->cpu = i;
+ tp->preempt_count = 0;
+
+ memset((void *)mcheckirq_ctx[i], 0, THREAD_SIZE);
+ tp = mcheckirq_ctx[i];
+ tp->cpu = i;
+ tp->preempt_count = HARDIRQ_OFFSET;
+#endif
+ }
+}
+#endif
#ifdef CONFIG_IRQSTACKS
struct thread_info *softirq_ctx[NR_CPUS] __read_mostly;
#ifdef CONFIG_PPC64
unsigned long arch_deref_entry_point(void *entry)
{
- return (unsigned long)(((func_descr_t *)entry)->entry);
+ return ((func_descr_t *)entry)->entry;
}
#endif
return single_open(file, lparcfg_data, NULL);
}
-const struct file_operations lparcfg_fops = {
+static const struct file_operations lparcfg_fops = {
.owner = THIS_MODULE,
.read = seq_read,
.write = lparcfg_write,
.release = single_release,
};
-int __init lparcfg_init(void)
+static int __init lparcfg_init(void)
{
struct proc_dir_entry *ent;
mode_t mode = S_IRUSR | S_IRGRP | S_IROTH;
return 0;
}
-void __exit lparcfg_cleanup(void)
+static void __exit lparcfg_cleanup(void)
{
if (proc_ppc64_lparcfg)
remove_proc_entry("lparcfg", proc_ppc64_lparcfg->parent);
* on calling the interrupts, but we would like to call it off irq level
* so that the interrupt controller is clean.
*/
-void kexec_smp_down(void *arg)
+static void kexec_smp_down(void *arg)
{
if (ppc_md.kexec_cpu_down)
ppc_md.kexec_cpu_down(0, 1);
* We could use a smaller stack if we don't care about anything using
* current, but that audit has not been performed.
*/
-union thread_union kexec_stack
+static union thread_union kexec_stack
__attribute__((__section__(".data.init_task"))) = { };
/* Our assembly helper, in kexec_stub.S */
void arch_teardown_msi_irqs(struct pci_dev *dev)
{
- return ppc_md.teardown_msi_irqs(dev);
+ ppc_md.teardown_msi_irqs(dev);
}
}
EXPORT_SYMBOL(of_device_alloc);
-ssize_t of_device_get_modalias(struct of_device *ofdev,
- char *str, ssize_t len)
-{
- const char *compat;
- int cplen, i;
- ssize_t tsize, csize, repend;
-
- /* Name & Type */
- csize = snprintf(str, len, "of:N%sT%s",
- ofdev->node->name, ofdev->node->type);
-
- /* Get compatible property if any */
- compat = of_get_property(ofdev->node, "compatible", &cplen);
- if (!compat)
- return csize;
-
- /* Find true end (we tolerate multiple \0 at the end */
- for (i=(cplen-1); i>=0 && !compat[i]; i--)
- cplen--;
- if (!cplen)
- return csize;
- cplen++;
-
- /* Check space (need cplen+1 chars including final \0) */
- tsize = csize + cplen;
- repend = tsize;
-
- if (csize>=len) /* @ the limit, all is already filled */
- return tsize;
-
- if (tsize>=len) { /* limit compat list */
- cplen = len-csize-1;
- repend = len;
- }
-
- /* Copy and do char replacement */
- memcpy(&str[csize+1], compat, cplen);
- for (i=csize; i<repend; i++) {
- char c = str[i];
- if (c=='\0')
- str[i] = 'C';
- else if (c==' ')
- str[i] = '_';
- }
-
- return tsize;
-}
-
int of_device_uevent(struct device *dev, struct kobj_uevent_env *env)
{
struct of_device *ofdev;
return single_open(file, ppc_rtas_sensors_show, NULL);
}
-const struct file_operations ppc_rtas_sensors_operations = {
+static const struct file_operations ppc_rtas_sensors_operations = {
.open = sensors_open,
.read = seq_read,
.llseek = seq_lseek,
return single_open(file, ppc_rtas_poweron_show, NULL);
}
-const struct file_operations ppc_rtas_poweron_operations = {
+static const struct file_operations ppc_rtas_poweron_operations = {
.open = poweron_open,
.read = seq_read,
.llseek = seq_lseek,
return single_open(file, ppc_rtas_progress_show, NULL);
}
-const struct file_operations ppc_rtas_progress_operations = {
+static const struct file_operations ppc_rtas_progress_operations = {
.open = progress_open,
.read = seq_read,
.llseek = seq_lseek,
return single_open(file, ppc_rtas_clock_show, NULL);
}
-const struct file_operations ppc_rtas_clock_operations = {
+static const struct file_operations ppc_rtas_clock_operations = {
.open = clock_open,
.read = seq_read,
.llseek = seq_lseek,
return single_open(file, ppc_rtas_tone_freq_show, NULL);
}
-const struct file_operations ppc_rtas_tone_freq_operations = {
+static const struct file_operations ppc_rtas_tone_freq_operations = {
.open = tone_freq_open,
.read = seq_read,
.llseek = seq_lseek,
return single_open(file, ppc_rtas_tone_volume_show, NULL);
}
-const struct file_operations ppc_rtas_tone_volume_operations = {
+static const struct file_operations ppc_rtas_tone_volume_operations = {
.open = tone_volume_open,
.read = seq_read,
.llseek = seq_lseek,
return single_open(file, ppc_rtas_rmo_buf_show, NULL);
}
-const struct file_operations ppc_rtas_rmo_buf_ops = {
+static const struct file_operations ppc_rtas_rmo_buf_ops = {
.open = rmo_buf_open,
.read = seq_read,
.llseek = seq_lseek,
EXPORT_SYMBOL(rtas_get_error_log_max);
-char rtas_err_buf[RTAS_ERROR_LOG_MAX];
-int rtas_last_error_token;
+static char rtas_err_buf[RTAS_ERROR_LOG_MAX];
+static int rtas_last_error_token;
/** Return a copy of the detailed error text associated with the
* most recent failed call to rtas. Because the error text
}
EXPORT_SYMBOL(rtas_busy_delay);
-int rtas_error_rc(int rtas_rc)
+static int rtas_error_rc(int rtas_rc)
{
int rc;
.release = validate_flash_release,
};
-int __init rtas_flash_init(void)
+static int __init rtas_flash_init(void)
{
int rc;
return rc;
}
-void __exit rtas_flash_cleanup(void)
+static void __exit rtas_flash_cleanup(void)
{
rtas_flash_term_hook = NULL;
return PCIBIOS_DEVICE_NOT_FOUND;
}
-struct pci_ops rtas_pci_ops = {
+static struct pci_ops rtas_pci_ops = {
.read = rtas_pci_read_config,
.write = rtas_pci_write_config,
};
-int is_python(struct device_node *dev)
+static int is_python(struct device_node *dev)
{
const char *model = of_get_property(dev, "model", NULL);
#define irqstack_early_init()
#endif
+#if defined(CONFIG_BOOKE) || defined(CONFIG_40x)
+static void __init exc_lvl_early_init(void)
+{
+ unsigned int i;
+
+ /* interrupt stacks must be in lowmem, we get that for free on ppc32
+ * as the lmb is limited to lowmem by LMB_REAL_LIMIT */
+ for_each_possible_cpu(i) {
+ critirq_ctx[i] = (struct thread_info *)
+ __va(lmb_alloc(THREAD_SIZE, THREAD_SIZE));
+#ifdef CONFIG_BOOKE
+ dbgirq_ctx[i] = (struct thread_info *)
+ __va(lmb_alloc(THREAD_SIZE, THREAD_SIZE));
+ mcheckirq_ctx[i] = (struct thread_info *)
+ __va(lmb_alloc(THREAD_SIZE, THREAD_SIZE));
+#endif
+ }
+}
+#else
+#define exc_lvl_early_init()
+#endif
+
/* Warning, IO base is not yet inited */
void __init setup_arch(char **cmdline_p)
{
init_mm.end_data = (unsigned long) _edata;
init_mm.brk = klimit;
+ exc_lvl_early_init();
+
irqstack_early_init();
/* set up the bootmem stuff with available memory */
int ret;
int is32 = is_32bit_task();
- if (test_thread_flag(TIF_RESTORE_SIGMASK))
+ if (current_thread_info()->local_flags & _TLF_RESTORE_SIGMASK)
oldset = ¤t->saved_sigmask;
else if (!oldset)
oldset = ¤t->blocked;
check_syscall_restart(regs, &ka, signr > 0);
if (signr <= 0) {
+ struct thread_info *ti = current_thread_info();
/* No signal to deliver -- put the saved sigmask back */
- if (test_thread_flag(TIF_RESTORE_SIGMASK)) {
- clear_thread_flag(TIF_RESTORE_SIGMASK);
+ if (ti->local_flags & _TLF_RESTORE_SIGMASK) {
+ ti->local_flags &= ~_TLF_RESTORE_SIGMASK;
sigprocmask(SIG_SETMASK, ¤t->saved_sigmask, NULL);
}
return 0; /* no signals delivered */
/*
* A signal was successfully delivered; the saved sigmask is in
- * its frame, and we can clear the TIF_RESTORE_SIGMASK flag.
+ * its frame, and we can clear the TLF_RESTORE_SIGMASK flag.
*/
- if (test_thread_flag(TIF_RESTORE_SIGMASK))
- clear_thread_flag(TIF_RESTORE_SIGMASK);
+ current_thread_info()->local_flags &= ~_TLF_RESTORE_SIGMASK;
}
return ret;
current->state = TASK_INTERRUPTIBLE;
schedule();
- set_thread_flag(TIF_RESTORE_SIGMASK);
+ set_restore_sigmask();
return -ERESTARTNOHAND;
}
}
}
-extern struct gettimeofday_struct do_gtod;
-
struct thread_info *current_set[NR_CPUS];
-DECLARE_PER_CPU(unsigned int, pvr);
-
static void __devinit smp_store_cpu_info(int id)
{
per_cpu(pvr, id) = mfspr(SPRN_PVR);
static signed long __initdata iSeries_recal_tb;
/* Forward declaration is only needed for iSereis compiles */
-void __init clocksource_init(void);
+static void __init clocksource_init(void);
#endif
#define XSEC_PER_SEC (1024*1024)
unsigned tb_to_us;
#define TICKLEN_SCALE NTP_SCALE_SHIFT
-u64 last_tick_len; /* units are ns / 2^TICKLEN_SCALE */
-u64 ticklen_to_xs; /* 0.64 fraction */
+static u64 last_tick_len; /* units are ns / 2^TICKLEN_SCALE */
+static u64 ticklen_to_xs; /* 0.64 fraction */
/* If last_tick_len corresponds to about 1/HZ seconds, then
last_tick_len << TICKLEN_SHIFT will be about 2^63. */
static unsigned tb_to_ns_shift __read_mostly;
static unsigned long boot_tb __read_mostly;
-struct gettimeofday_struct do_gtod;
+static struct gettimeofday_struct do_gtod;
extern struct timezone sys_tz;
static long timezone_offset;
++vdso_data->tb_update_count;
}
-void __init clocksource_init(void)
+static void __init clocksource_init(void)
{
struct clocksource *clock;
.rodata : { *(.rodata .rodata.* .gnu.linkonce.r.*) }
.rodata1 : { *(.rodata1) }
+ .dynamic : { *(.dynamic) } :text :dynamic
+
.eh_frame_hdr : { *(.eh_frame_hdr) } :text :eh_frame_hdr
.eh_frame : { KEEP (*(.eh_frame)) } :text
.gcc_except_table : { *(.gcc_except_table) }
+ .rela.dyn ALIGN(8) : { *(.rela.dyn) }
.opd ALIGN(8) : { KEEP (*(.opd)) }
.got ALIGN(8) : { *(.got .toc) }
- .rela.dyn ALIGN(8) : { *(.rela.dyn) }
-
- .dynamic : { *(.dynamic) } :text :dynamic
_end = .;
PROVIDE(end = .);
/* Pre-POWER4 CPUs (4k pages only)
*/
-struct mmu_psize_def mmu_psize_defaults_old[] = {
+static struct mmu_psize_def mmu_psize_defaults_old[] = {
[MMU_PAGE_4K] = {
.shift = 12,
.sllp = 0,
*
* Support for 16Mb large pages
*/
-struct mmu_psize_def mmu_psize_defaults_gp[] = {
+static struct mmu_psize_def mmu_psize_defaults_gp[] = {
[MMU_PAGE_4K] = {
.shift = 12,
.sllp = 0,
unsigned long base = 0, size = 0, limit;
int i;
- extern unsigned long tce_alloc_start, tce_alloc_end;
-
DBG(" -> htab_initialize()\n");
/* Initialize segment sizes */
#include <asm/btext.h>
#include <asm/tlb.h>
#include <asm/sections.h>
+#include <asm/system.h>
#include "mmu_decl.h"
/* XXX should be in current.h -- paulus */
extern struct task_struct *current_set[NR_CPUS];
-extern int init_bootmem_done;
-
/*
* this tells the system to map all of ram with the segregs
* (i.e. page tables) instead of the bats.
* do this by hand as the proffered address may not be correctly aligned.
* Subtraction of non-aligned pointers produces undefined results.
*/
-unsigned long __meminit vmemmap_section_start(unsigned long page)
+static unsigned long __meminit vmemmap_section_start(unsigned long page)
{
unsigned long offset = page - ((unsigned long)(vmemmap));
* which overlaps this vmemmap page is initialised then this page is
* initialised already.
*/
-int __meminit vmemmap_populated(unsigned long start, int page_size)
+static int __meminit vmemmap_populated(unsigned long start, int page_size)
{
unsigned long end = start + page_size;
};
#define NR_STAB_CACHE_ENTRIES 8
-DEFINE_PER_CPU(long, stab_cache_ptr);
-DEFINE_PER_CPU(long, stab_cache[NR_STAB_CACHE_ENTRIES]);
+static DEFINE_PER_CPU(long, stab_cache_ptr);
+static DEFINE_PER_CPU(long, stab_cache[NR_STAB_CACHE_ENTRIES]);
/*
* Create a segment table entry for the given esid/vsid pair.
* include/asm-powerpc/tlb.h file -- tgall
*/
DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
-DEFINE_PER_CPU(struct pte_freelist_batch *, pte_freelist_cur);
-unsigned long pte_freelist_forced_free;
+static DEFINE_PER_CPU(struct pte_freelist_batch *, pte_freelist_cur);
+static unsigned long pte_freelist_forced_free;
struct pte_freelist_batch
{
pgtable_free_t tables[0];
};
-DEFINE_PER_CPU(struct pte_freelist_batch *, pte_freelist_cur);
-unsigned long pte_freelist_forced_free;
-
#define PTE_FREELIST_SIZE \
((PAGE_SIZE - sizeof(struct pte_freelist_batch)) \
/ sizeof(pgtable_free_t))
#include <linux/mtd/partitions.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/ndfc.h>
+#include <linux/of.h>
#include <asm/machdep.h>
+
#ifdef CONFIG_MTD_NAND_NDFC
#define CS_NAND_0 1 /* use chip select 1 for NAND device 0 */
{
.name = "root",
.offset = 0x0200000,
- .size = 0x3400000
+ .size = 0x3E00000
+ },
+ {
+ .name = "persistent",
+ .offset = 0x4000000,
+ .size = 0x4000000
},
{
- .name = "user",
- .offset = 0x3600000,
- .size = 0x0A00000
+ .name = "persistent1",
+ .offset = 0x8000000,
+ .size = 0x4000000
},
+ {
+ .name = "persistent2",
+ .offset = 0xC000000,
+ .size = 0x4000000
+ }
};
struct ndfc_controller_settings warp_ndfc_settings = {
.resource = &warp_ndfc,
};
-static struct nand_ecclayout nand_oob_16 = {
- .eccbytes = 3,
- .eccpos = { 0, 1, 2, 3, 6, 7 },
- .oobfree = { {.offset = 8, .length = 16} }
-};
-
+/* Do NOT set the ecclayout: let it default so it is correct for both
+ * 64M and 256M flash chips.
+ */
static struct platform_nand_chip warp_nand_chip0 = {
.nr_chips = 1,
.chip_offset = CS_NAND_0,
.nr_partitions = ARRAY_SIZE(nand_parts),
.partitions = nand_parts,
- .chip_delay = 50,
- .ecclayout = &nand_oob_16,
+ .chip_delay = 20,
.priv = &warp_chip0_settings,
};
static int warp_setup_nand_flash(void)
{
+ struct device_node *np;
+
+ /* Try to detect a rev A based on NOR size. */
+ np = of_find_compatible_node(NULL, NULL, "cfi-flash");
+ if (np) {
+ struct property *pp;
+
+ pp = of_find_property(np, "reg", NULL);
+ if (pp && (pp->length == 12)) {
+ u32 *v = pp->value;
+ if (v[2] == 0x4000000)
+ /* Rev A = 64M NAND */
+ warp_nand_chip0.nr_partitions = 2;
+ }
+ of_node_put(np);
+ }
+
platform_device_register(&warp_ndfc_device);
platform_device_register(&warp_nand_device);
#include <linux/init.h>
#include <linux/of_platform.h>
#include <linux/kthread.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
#include <asm/machdep.h>
#include <asm/prom.h>
{},
};
+static __initdata struct i2c_board_info warp_i2c_info[] = {
+ { I2C_BOARD_INFO("ad7414", 0x4a) }
+};
+
+static int __init warp_arch_init(void)
+{
+ /* This should go away once support is moved to the dts. */
+ i2c_register_board_info(0, warp_i2c_info, ARRAY_SIZE(warp_i2c_info));
+ return 0;
+}
+machine_arch_initcall(warp, warp_arch_init);
+
static int __init warp_device_probe(void)
{
of_platform_bus_probe(NULL, warp_of_bus, NULL);
};
-#define LED_GREEN (0x80000000 >> 0)
-#define LED_RED (0x80000000 >> 1)
+/* I am not sure this is the best place for this... */
+static int __init warp_post_info(void)
+{
+ struct device_node *np;
+ void __iomem *fpga;
+ u32 post1, post2;
+
+ /* Sighhhh... POST information is in the sd area. */
+ np = of_find_compatible_node(NULL, NULL, "pika,fpga-sd");
+ if (np == NULL)
+ return -ENOENT;
+
+ fpga = of_iomap(np, 0);
+ of_node_put(np);
+ if (fpga == NULL)
+ return -ENOENT;
+
+ post1 = in_be32(fpga + 0x40);
+ post2 = in_be32(fpga + 0x44);
+
+ iounmap(fpga);
+
+ if (post1 || post2)
+ printk(KERN_INFO "Warp POST %08x %08x\n", post1, post2);
+ else
+ printk(KERN_INFO "Warp POST OK\n");
+
+ return 0;
+}
+machine_late_initcall(warp, warp_post_info);
+
+
+#ifdef CONFIG_SENSORS_AD7414
+
+static LIST_HEAD(dtm_shutdown_list);
+static void __iomem *dtm_fpga;
+static void __iomem *gpio_base;
+
+
+struct dtm_shutdown {
+ struct list_head list;
+ void (*func)(void *arg);
+ void *arg;
+};
-/* This is for the power LEDs 1 = on, 0 = off, -1 = leave alone */
-void warp_set_power_leds(int green, int red)
+int pika_dtm_register_shutdown(void (*func)(void *arg), void *arg)
{
- static void __iomem *gpio_base = NULL;
- unsigned leds;
-
- if (gpio_base == NULL) {
- struct device_node *np;
-
- /* Power LEDS are on the second GPIO controller */
- np = of_find_compatible_node(NULL, NULL, "ibm,gpio-440EP");
- if (np)
- np = of_find_compatible_node(np, NULL, "ibm,gpio-440EP");
- if (np == NULL) {
- printk(KERN_ERR __FILE__ ": Unable to find gpio\n");
- return;
+ struct dtm_shutdown *shutdown;
+
+ shutdown = kmalloc(sizeof(struct dtm_shutdown), GFP_KERNEL);
+ if (shutdown == NULL)
+ return -ENOMEM;
+
+ shutdown->func = func;
+ shutdown->arg = arg;
+
+ list_add(&shutdown->list, &dtm_shutdown_list);
+
+ return 0;
+}
+
+int pika_dtm_unregister_shutdown(void (*func)(void *arg), void *arg)
+{
+ struct dtm_shutdown *shutdown;
+
+ list_for_each_entry(shutdown, &dtm_shutdown_list, list)
+ if (shutdown->func == func && shutdown->arg == arg) {
+ list_del(&shutdown->list);
+ kfree(shutdown);
+ return 0;
+ }
+
+ return -EINVAL;
+}
+
+static irqreturn_t temp_isr(int irq, void *context)
+{
+ struct dtm_shutdown *shutdown;
+
+ local_irq_disable();
+
+ /* Run through the shutdown list. */
+ list_for_each_entry(shutdown, &dtm_shutdown_list, list)
+ shutdown->func(shutdown->arg);
+
+ printk(KERN_EMERG "\n\nCritical Temperature Shutdown\n");
+
+ while (1) {
+ if (dtm_fpga) {
+ unsigned reset = in_be32(dtm_fpga + 0x14);
+ out_be32(dtm_fpga + 0x14, reset);
}
- gpio_base = of_iomap(np, 0);
- of_node_put(np);
- if (gpio_base == NULL) {
- printk(KERN_ERR __FILE__ ": Unable to map gpio");
- return;
+ if (gpio_base) {
+ unsigned leds = in_be32(gpio_base);
+
+ /* green off, red toggle */
+ leds &= ~0x80000000;
+ leds ^= 0x40000000;
+
+ out_be32(gpio_base, leds);
}
+
+ mdelay(500);
+ }
+}
+
+static int pika_setup_leds(void)
+{
+ struct device_node *np;
+ const u32 *gpios;
+ int len;
+
+ np = of_find_compatible_node(NULL, NULL, "linux,gpio-led");
+ if (!np) {
+ printk(KERN_ERR __FILE__ ": Unable to find gpio-led\n");
+ return -ENOENT;
}
- leds = in_be32(gpio_base);
+ gpios = of_get_property(np, "gpios", &len);
+ of_node_put(np);
+ if (!gpios || len < 4) {
+ printk(KERN_ERR __FILE__
+ ": Unable to get gpios property (%d)\n", len);
+ return -ENOENT;
+ }
- switch (green) {
- case 0: leds &= ~LED_GREEN; break;
- case 1: leds |= LED_GREEN; break;
+ np = of_find_node_by_phandle(gpios[0]);
+ if (!np) {
+ printk(KERN_ERR __FILE__ ": Unable to find gpio\n");
+ return -ENOENT;
}
- switch (red) {
- case 0: leds &= ~LED_RED; break;
- case 1: leds |= LED_RED; break;
+
+ gpio_base = of_iomap(np, 0);
+ of_node_put(np);
+ if (!gpio_base) {
+ printk(KERN_ERR __FILE__ ": Unable to map gpio");
+ return -ENOMEM;
}
- out_be32(gpio_base, leds);
+ return 0;
}
-EXPORT_SYMBOL(warp_set_power_leds);
+static void pika_setup_critical_temp(struct i2c_client *client)
+{
+ struct device_node *np;
+ int irq, rc;
+
+ /* Do this before enabling critical temp interrupt since we
+ * may immediately interrupt.
+ */
+ pika_setup_leds();
+
+ /* These registers are in 1 degree increments. */
+ i2c_smbus_write_byte_data(client, 2, 65); /* Thigh */
+ i2c_smbus_write_byte_data(client, 3, 55); /* Tlow */
+
+ np = of_find_compatible_node(NULL, NULL, "adi,ad7414");
+ if (np == NULL) {
+ printk(KERN_ERR __FILE__ ": Unable to find ad7414\n");
+ return;
+ }
+
+ irq = irq_of_parse_and_map(np, 0);
+ of_node_put(np);
+ if (irq == NO_IRQ) {
+ printk(KERN_ERR __FILE__ ": Unable to get ad7414 irq\n");
+ return;
+ }
+
+ rc = request_irq(irq, temp_isr, 0, "ad7414", NULL);
+ if (rc) {
+ printk(KERN_ERR __FILE__
+ ": Unable to request ad7414 irq %d = %d\n", irq, rc);
+ return;
+ }
+}
+
+static inline void pika_dtm_check_fan(void __iomem *fpga)
+{
+ static int fan_state;
+ u32 fan = in_be32(fpga + 0x34) & (1 << 14);
+
+ if (fan_state != fan) {
+ fan_state = fan;
+ if (fan)
+ printk(KERN_WARNING "Fan rotation error detected."
+ " Please check hardware.\n");
+ }
+}
-#ifdef CONFIG_SENSORS_AD7414
static int pika_dtm_thread(void __iomem *fpga)
{
- extern int ad7414_get_temp(int index);
+ struct i2c_adapter *adap;
+ struct i2c_client *client;
+
+ /* We loop in case either driver was compiled as a module and
+ * has not been insmoded yet.
+ */
+ while (!(adap = i2c_get_adapter(0))) {
+ set_current_state(TASK_INTERRUPTIBLE);
+ schedule_timeout(HZ);
+ }
+
+ while (1) {
+ list_for_each_entry(client, &adap->clients, list)
+ if (client->addr == 0x4a)
+ goto found_it;
+
+ set_current_state(TASK_INTERRUPTIBLE);
+ schedule_timeout(HZ);
+ }
+
+found_it:
+ i2c_put_adapter(adap);
+
+ pika_setup_critical_temp(client);
+
+ printk(KERN_INFO "PIKA DTM thread running.\n");
while (!kthread_should_stop()) {
- int temp = ad7414_get_temp(0);
+ u16 temp = swab16(i2c_smbus_read_word_data(client, 0));
+ out_be32(fpga + 0x20, temp);
- out_be32(fpga, temp);
+ pika_dtm_check_fan(fpga);
set_current_state(TASK_INTERRUPTIBLE);
schedule_timeout(HZ);
return 0;
}
+
static int __init pika_dtm_start(void)
{
struct task_struct *dtm_thread;
struct device_node *np;
- struct resource res;
- void __iomem *fpga;
np = of_find_compatible_node(NULL, NULL, "pika,fpga");
if (np == NULL)
return -ENOENT;
- /* We do not call of_iomap here since it would map in the entire
- * fpga space, which is over 8k.
- */
- if (of_address_to_resource(np, 0, &res)) {
- of_node_put(np);
- return -ENOENT;
- }
+ dtm_fpga = of_iomap(np, 0);
of_node_put(np);
-
- fpga = ioremap(res.start, 0x24);
- if (fpga == NULL)
+ if (dtm_fpga == NULL)
return -ENOENT;
- dtm_thread = kthread_run(pika_dtm_thread, fpga + 0x20, "pika-dtm");
+ dtm_thread = kthread_run(pika_dtm_thread, dtm_fpga, "pika-dtm");
if (IS_ERR(dtm_thread)) {
- iounmap(fpga);
+ iounmap(dtm_fpga);
return PTR_ERR(dtm_thread);
}
return 0;
}
-device_initcall(pika_dtm_start);
+machine_late_initcall(warp, pika_dtm_start);
+
+#else /* !CONFIG_SENSORS_AD7414 */
+
+int pika_dtm_register_shutdown(void (*func)(void *arg), void *arg)
+{
+ return 0;
+}
+
+int pika_dtm_unregister_shutdown(void (*func)(void *arg), void *arg)
+{
+ return 0;
+}
+
#endif
+
+EXPORT_SYMBOL(pika_dtm_register_shutdown);
+EXPORT_SYMBOL(pika_dtm_unregister_shutdown);
help
This option enables support for the Wind River SBC834x board.
+config ASP834x
+ bool "Analogue & Micro ASP 834x"
+ select PPC_MPC834x
+ select REDBOOT
+ help
+ This enables support for the Analogue & Micro ASP 83xx
+ board.
+
+
endif
# used for usb
obj-$(CONFIG_MPC837x_MDS) += mpc837x_mds.o
obj-$(CONFIG_SBC834x) += sbc834x.o
obj-$(CONFIG_MPC837x_RDB) += mpc837x_rdb.o
+obj-$(CONFIG_ASP834x) += asp834x.o
--- /dev/null
+/*
+ * arch/powerpc/platforms/83xx/asp834x.c
+ *
+ * Analogue & Micro ASP8347 board specific routines
+ * clone of mpc834x_itx
+ *
+ * Copyright 2008 Codehermit
+ *
+ * Maintainer: Bryan O'Donoghue <bodonoghue@codhermit.ie>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/pci.h>
+#include <linux/of_platform.h>
+
+#include <asm/time.h>
+#include <asm/ipic.h>
+#include <asm/udbg.h>
+
+#include "mpc83xx.h"
+
+/* ************************************************************************
+ *
+ * Setup the architecture
+ *
+ */
+static void __init asp834x_setup_arch(void)
+{
+ if (ppc_md.progress)
+ ppc_md.progress("asp834x_setup_arch()", 0);
+
+ mpc834x_usb_cfg();
+}
+
+static void __init asp834x_init_IRQ(void)
+{
+ struct device_node *np;
+
+ np = of_find_node_by_type(NULL, "ipic");
+ if (!np)
+ return;
+
+ ipic_init(np, 0);
+
+ of_node_put(np);
+
+ /* Initialize the default interrupt mapping priorities,
+ * in case the boot rom changed something on us.
+ */
+ ipic_set_default_priority();
+}
+
+static struct __initdata of_device_id asp8347_ids[] = {
+ { .type = "soc", },
+ { .compatible = "soc", },
+ { .compatible = "simple-bus", },
+ {},
+};
+
+static int __init asp8347_declare_of_platform_devices(void)
+{
+ of_platform_bus_probe(NULL, asp8347_ids, NULL);
+ return 0;
+}
+machine_device_initcall(asp834x, asp8347_declare_of_platform_devices);
+
+/*
+ * Called very early, MMU is off, device-tree isn't unflattened
+ */
+static int __init asp834x_probe(void)
+{
+ unsigned long root = of_get_flat_dt_root();
+ return of_flat_dt_is_compatible(root, "analogue-and-micro,asp8347e");
+}
+
+define_machine(asp834x) {
+ .name = "ASP8347E",
+ .probe = asp834x_probe,
+ .setup_arch = asp834x_setup_arch,
+ .init_IRQ = asp834x_init_IRQ,
+ .get_irq = ipic_get_irq,
+ .restart = mpc83xx_restart,
+ .time_init = mpc83xx_time_init,
+ .calibrate_decr = generic_calibrate_decr,
+ .progress = udbg_progress,
+};
}
mpic = mpic_alloc(np, r.start,
- MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN,
+ MPIC_PRIMARY | MPIC_WANTS_RESET |
+ MPIC_BIG_ENDIAN | MPIC_BROKEN_FRR_NIRQS,
0, 256, " OpenPIC ");
BUG_ON(mpic == NULL);
return of_platform_bus_probe(NULL, mpc85xxds_ids, NULL);
}
machine_device_initcall(mpc8544_ds, mpc85xxds_publish_devices);
+machine_device_initcall(mpc8572_ds, mpc85xxds_publish_devices);
/*
* Called very early, device-tree isn't unflattened
/* Alloc mpic structure and per isu has 16 INT entries. */
mpic1 = mpic_alloc(np, res.start,
- MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN,
+ MPIC_PRIMARY | MPIC_WANTS_RESET |
+ MPIC_BIG_ENDIAN | MPIC_BROKEN_FRR_NIRQS,
0, 256, " MPIC ");
BUG_ON(mpic1 == NULL);
#include <linux/pci.h>
#include <linux/msi.h>
#include <linux/of_platform.h>
+#include <linux/debugfs.h>
#include <asm/dcr.h>
#include <asm/machdep.h>
dma_addr_t fifo_phys;
dcr_host_t dcr_host;
u32 read_offset;
+#ifdef DEBUG
+ u32 __iomem *trigger;
+#endif
};
+#ifdef DEBUG
+void axon_msi_debug_setup(struct device_node *dn, struct axon_msic *msic);
+#else
+static inline void axon_msi_debug_setup(struct device_node *dn,
+ struct axon_msic *msic) { }
+#endif
+
+
static void msic_dcr_write(struct axon_msic *msic, unsigned int dcr_n, u32 val)
{
pr_debug("axon_msi: dcr_write(0x%x, 0x%x)\n", val, dcr_n);
ppc_md.teardown_msi_irqs = axon_msi_teardown_msi_irqs;
ppc_md.msi_check_device = axon_msi_check_device;
+ axon_msi_debug_setup(dn, msic);
+
printk(KERN_DEBUG "axon_msi: setup MSIC on %s\n", dn->full_name);
return 0;
return of_register_platform_driver(&axon_msi_driver);
}
subsys_initcall(axon_msi_init);
+
+
+#ifdef DEBUG
+static int msic_set(void *data, u64 val)
+{
+ struct axon_msic *msic = data;
+ out_le32(msic->trigger, val);
+ return 0;
+}
+
+static int msic_get(void *data, u64 *val)
+{
+ *val = 0;
+ return 0;
+}
+
+DEFINE_SIMPLE_ATTRIBUTE(fops_msic, msic_get, msic_set, "%llu\n");
+
+void axon_msi_debug_setup(struct device_node *dn, struct axon_msic *msic)
+{
+ char name[8];
+ u64 addr;
+
+ addr = of_translate_address(dn, of_get_property(dn, "reg", NULL));
+ if (addr == OF_BAD_ADDR) {
+ pr_debug("axon_msi: couldn't translate reg property\n");
+ return;
+ }
+
+ msic->trigger = ioremap(addr, 0x4);
+ if (!msic->trigger) {
+ pr_debug("axon_msi: ioremap failed\n");
+ return;
+ }
+
+ snprintf(name, sizeof(name), "msic_%d", of_node_to_nid(dn));
+
+ if (!debugfs_create_file(name, 0600, powerpc_debugfs_root,
+ msic, &fops_msic)) {
+ pr_debug("axon_msi: debugfs_create_file failed!\n");
+ return;
+ }
+}
+#endif /* DEBUG */
DEFINE_PER_CPU(struct timer_list, heartbeat_timer);
unsigned long event_scan_interval;
-/*
- * XXX this should be in xmon.h, but putting it there means xmon.h
- * has to include <linux/interrupt.h> (to get irqreturn_t), which
- * causes all sorts of problems. -- paulus
- */
-extern irqreturn_t xmon_irq(int, void *);
-
extern unsigned long loops_per_jiffy;
/* To be replaced by RTAS when available */
#define DBG(x...)
#endif
-extern void GregorianDay(struct rtc_time * tm);
-
static int maple_rtc_addr;
static int maple_clock_read(int addr)
#include <asm/time.h>
#include <asm/pmac_feature.h>
#include <asm/mpic.h>
+#include <asm/xmon.h>
#include "pmac.h"
-/*
- * XXX this should be in xmon.h, but putting it there means xmon.h
- * has to include <linux/interrupt.h> (to get irqreturn_t), which
- * causes all sorts of problems. -- paulus
- */
-extern irqreturn_t xmon_irq(int, void *);
-
#ifdef CONFIG_PPC32
struct pmac_irq_hw {
unsigned int event;
#include <asm/prom.h>
#include <asm/udbg.h>
+#include "pseries.h"
typedef struct {
unsigned long val;
u64 rpn;
long l, limit;
- if (npages == 1)
- return tce_build_pSeriesLP(tbl, tcenum, npages, uaddr,
- direction);
+ if (npages == 1) {
+ tce_build_pSeriesLP(tbl, tcenum, npages, uaddr, direction);
+ return;
+ }
tcep = __get_cpu_var(tce_page);
if (!tcep) {
tcep = (u64 *)__get_free_page(GFP_ATOMIC);
/* If allocation fails, fall back to the loop implementation */
- if (!tcep)
- return tce_build_pSeriesLP(tbl, tcenum, npages,
- uaddr, direction);
+ if (!tcep) {
+ tce_build_pSeriesLP(tbl, tcenum, npages, uaddr,
+ direction);
+ return;
+ }
__get_cpu_var(tce_page) = tcep;
}
extern void pSeries_find_serial_port(void);
-int vtermno; /* virtual terminal# for udbg */
+static int vtermno; /* virtual terminal# for udbg */
#define __ALIGNED__ __attribute__((__aligned__(sizeof(long))))
static void udbg_hvsi_putc(char c)
static unsigned char ras_log_buf[RTAS_ERROR_LOG_MAX];
static DEFINE_SPINLOCK(ras_log_buf_lock);
-char mce_data_buf[RTAS_ERROR_LOG_MAX];
+static char mce_data_buf[RTAS_ERROR_LOG_MAX];
static int ras_get_sensor_state_token;
static int ras_check_exception_token;
static DEFINE_SPINLOCK(rtasd_log_lock);
-DECLARE_WAIT_QUEUE_HEAD(rtas_log_wait);
+static DECLARE_WAIT_QUEUE_HEAD(rtas_log_wait);
static char *rtas_log_buf;
static unsigned long rtas_log_start;
return 0;
}
-const struct file_operations proc_rtas_log_operations = {
+static const struct file_operations proc_rtas_log_operations = {
.read = rtas_log_read,
.poll = rtas_log_poll,
.open = rtas_log_open,
fwnmi_active = 1;
}
-void pseries_8259_cascade(unsigned int irq, struct irq_desc *desc)
+static void pseries_8259_cascade(unsigned int irq, struct irq_desc *desc)
{
unsigned int cascade_irq = i8259_irq();
if (cascade_irq != NO_IRQ)
* possible with power button press. If ibm,power-off-ups token is used
* it will allow auto poweron after power is restored.
*/
-void pSeries_power_off(void)
+static void pSeries_power_off(void)
{
int rc;
int rtas_poweroff_ups_token = rtas_token("ibm,power-off-ups");
--- /dev/null
+/*
+ * Enter and leave sleep state on chips with 6xx-style HID0
+ * power management bits, which don't leave sleep state via reset.
+ *
+ * Author: Scott Wood <scottwood@freescale.com>
+ *
+ * Copyright (c) 2006-2007 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <asm/ppc_asm.h>
+#include <asm/reg.h>
+#include <asm/thread_info.h>
+#include <asm/asm-offsets.h>
+
+_GLOBAL(mpc6xx_enter_standby)
+ mflr r4
+
+ mfspr r5, SPRN_HID0
+ rlwinm r5, r5, 0, ~(HID0_DOZE | HID0_NAP)
+ oris r5, r5, HID0_SLEEP@h
+ mtspr SPRN_HID0, r5
+ isync
+
+ lis r5, ret_from_standby@h
+ ori r5, r5, ret_from_standby@l
+ mtlr r5
+
+ rlwinm r5, r1, 0, 0, 31-THREAD_SHIFT
+ lwz r6, TI_LOCAL_FLAGS(r5)
+ ori r6, r6, _TLF_SLEEPING
+ stw r6, TI_LOCAL_FLAGS(r5)
+
+ mfmsr r5
+ ori r5, r5, MSR_EE
+ oris r5, r5, MSR_POW@h
+ sync
+ mtmsr r5
+ isync
+
+1: b 1b
+
+ret_from_standby:
+ mfspr r5, SPRN_HID0
+ rlwinm r5, r5, 0, ~HID0_SLEEP
+ mtspr SPRN_HID0, r5
+
+ mtlr r4
+ blr
mpic-msi-obj-$(CONFIG_PCI_MSI) += mpic_msi.o mpic_u3msi.o mpic_pasemi_msi.o
obj-$(CONFIG_MPIC) += mpic.o $(mpic-msi-obj-y)
+fsl-msi-obj-$(CONFIG_PCI_MSI) += fsl_msi.o
obj-$(CONFIG_PPC_MPC106) += grackle.o
obj-$(CONFIG_PPC_DCR_NATIVE) += dcr-low.o
obj-$(CONFIG_U3_DART) += dart_iommu.o
obj-$(CONFIG_MMIO_NVRAM) += mmio_nvram.o
obj-$(CONFIG_FSL_SOC) += fsl_soc.o
-obj-$(CONFIG_FSL_PCI) += fsl_pci.o
+obj-$(CONFIG_FSL_PCI) += fsl_pci.o $(fsl-msi-obj-y)
obj-$(CONFIG_FSL_LBC) += fsl_lbc.o
obj-$(CONFIG_RAPIDIO) += fsl_rio.o
obj-$(CONFIG_TSI108_BRIDGE) += tsi108_pci.o tsi108_dev.o
obj-$(CONFIG_8xx) += mpc8xx_pic.o cpm1.o
obj-$(CONFIG_UCODE_PATCH) += micropatch.o
endif
+
+ifeq ($(CONFIG_SUSPEND),y)
+obj-$(CONFIG_6xx) += 6xx-suspend.o
+endif
#include <asm/prom.h>
#include <asm/dcr.h>
+#ifdef CONFIG_PPC_DCR_MMIO
+static struct device_node *find_dcr_parent(struct device_node *node)
+{
+ struct device_node *par, *tmp;
+ const u32 *p;
+
+ for (par = of_node_get(node); par;) {
+ if (of_get_property(par, "dcr-controller", NULL))
+ break;
+ p = of_get_property(par, "dcr-parent", NULL);
+ tmp = par;
+ if (p == NULL)
+ par = of_get_parent(par);
+ else
+ par = of_find_node_by_phandle(*p);
+ of_node_put(tmp);
+ }
+ return par;
+}
+#endif
+
+#if defined(CONFIG_PPC_DCR_NATIVE) && defined(CONFIG_PPC_DCR_MMIO)
+
+bool dcr_map_ok_generic(dcr_host_t host)
+{
+ if (host.type == DCR_HOST_NATIVE)
+ return dcr_map_ok_native(host.host.native);
+ else if (host.type == DCR_HOST_MMIO)
+ return dcr_map_ok_mmio(host.host.mmio);
+ else
+ return 0;
+}
+EXPORT_SYMBOL_GPL(dcr_map_ok_generic);
+
+dcr_host_t dcr_map_generic(struct device_node *dev,
+ unsigned int dcr_n,
+ unsigned int dcr_c)
+{
+ dcr_host_t host;
+ struct device_node *dp;
+ const char *prop;
+
+ host.type = DCR_HOST_INVALID;
+
+ dp = find_dcr_parent(dev);
+ if (dp == NULL)
+ return host;
+
+ prop = of_get_property(dp, "dcr-access-method", NULL);
+
+ pr_debug("dcr_map_generic(dcr-access-method = %s)\n", prop);
+
+ if (!strcmp(prop, "native")) {
+ host.type = DCR_HOST_NATIVE;
+ host.host.native = dcr_map_native(dev, dcr_n, dcr_c);
+ } else if (!strcmp(prop, "mmio")) {
+ host.type = DCR_HOST_MMIO;
+ host.host.mmio = dcr_map_mmio(dev, dcr_n, dcr_c);
+ }
+
+ of_node_put(dp);
+ return host;
+}
+EXPORT_SYMBOL_GPL(dcr_map_generic);
+
+void dcr_unmap_generic(dcr_host_t host, unsigned int dcr_c)
+{
+ if (host.type == DCR_HOST_NATIVE)
+ dcr_unmap_native(host.host.native, dcr_c);
+ else if (host.type == DCR_HOST_MMIO)
+ dcr_unmap_mmio(host.host.mmio, dcr_c);
+ else /* host.type == DCR_HOST_INVALID */
+ WARN_ON(true);
+}
+EXPORT_SYMBOL_GPL(dcr_unmap_generic);
+
+u32 dcr_read_generic(dcr_host_t host, unsigned int dcr_n)
+{
+ if (host.type == DCR_HOST_NATIVE)
+ return dcr_read_native(host.host.native, dcr_n);
+ else if (host.type == DCR_HOST_MMIO)
+ return dcr_read_mmio(host.host.mmio, dcr_n);
+ else /* host.type == DCR_HOST_INVALID */
+ WARN_ON(true);
+ return 0;
+}
+EXPORT_SYMBOL_GPL(dcr_read_generic);
+
+void dcr_write_generic(dcr_host_t host, unsigned int dcr_n, u32 value)
+{
+ if (host.type == DCR_HOST_NATIVE)
+ dcr_write_native(host.host.native, dcr_n, value);
+ else if (host.type == DCR_HOST_MMIO)
+ dcr_write_mmio(host.host.mmio, dcr_n, value);
+ else /* host.type == DCR_HOST_INVALID */
+ WARN_ON(true);
+}
+EXPORT_SYMBOL_GPL(dcr_write_generic);
+
+#endif /* defined(CONFIG_PPC_DCR_NATIVE) && defined(CONFIG_PPC_DCR_MMIO) */
+
unsigned int dcr_resource_start(struct device_node *np, unsigned int index)
{
unsigned int ds;
}
EXPORT_SYMBOL_GPL(dcr_resource_len);
-#ifndef CONFIG_PPC_DCR_NATIVE
-
-static struct device_node * find_dcr_parent(struct device_node * node)
-{
- struct device_node *par, *tmp;
- const u32 *p;
-
- for (par = of_node_get(node); par;) {
- if (of_get_property(par, "dcr-controller", NULL))
- break;
- p = of_get_property(par, "dcr-parent", NULL);
- tmp = par;
- if (p == NULL)
- par = of_get_parent(par);
- else
- par = of_find_node_by_phandle(*p);
- of_node_put(tmp);
- }
- return par;
-}
+#ifdef CONFIG_PPC_DCR_MMIO
u64 of_translate_dcr_address(struct device_node *dev,
unsigned int dcr_n,
struct device_node *dp;
const u32 *p;
unsigned int stride;
- u64 ret;
+ u64 ret = OF_BAD_ADDR;
dp = find_dcr_parent(dev);
if (dp == NULL)
if (p == NULL)
p = of_get_property(dp, "dcr-mmio-space", NULL);
if (p == NULL)
- return OF_BAD_ADDR;
+ goto done;
/* Maybe could do some better range checking here */
ret = of_translate_address(dp, p);
ret += (u64)(stride) * (u64)dcr_n;
if (out_stride)
*out_stride = stride;
+
+ done:
+ of_node_put(dp);
return ret;
}
-dcr_host_t dcr_map(struct device_node *dev, unsigned int dcr_n,
- unsigned int dcr_c)
+dcr_host_mmio_t dcr_map_mmio(struct device_node *dev,
+ unsigned int dcr_n,
+ unsigned int dcr_c)
{
- dcr_host_t ret = { .token = NULL, .stride = 0, .base = dcr_n };
+ dcr_host_mmio_t ret = { .token = NULL, .stride = 0, .base = dcr_n };
u64 addr;
pr_debug("dcr_map(%s, 0x%x, 0x%x)\n",
dev->full_name, dcr_n, dcr_c);
addr = of_translate_dcr_address(dev, dcr_n, &ret.stride);
- pr_debug("translates to addr: 0x%lx, stride: 0x%x\n",
- addr, ret.stride);
+ pr_debug("translates to addr: 0x%llx, stride: 0x%x\n",
+ (unsigned long long) addr, ret.stride);
if (addr == OF_BAD_ADDR)
return ret;
pr_debug("mapping 0x%x bytes\n", dcr_c * ret.stride);
ret.token -= dcr_n * ret.stride;
return ret;
}
-EXPORT_SYMBOL_GPL(dcr_map);
+EXPORT_SYMBOL_GPL(dcr_map_mmio);
-void dcr_unmap(dcr_host_t host, unsigned int dcr_c)
+void dcr_unmap_mmio(dcr_host_mmio_t host, unsigned int dcr_c)
{
- dcr_host_t h = host;
+ dcr_host_mmio_t h = host;
if (h.token == NULL)
return;
iounmap(h.token);
h.token = NULL;
}
-EXPORT_SYMBOL_GPL(dcr_unmap);
-#else /* defined(CONFIG_PPC_DCR_NATIVE) */
+EXPORT_SYMBOL_GPL(dcr_unmap_mmio);
+
+#endif /* defined(CONFIG_PPC_DCR_MMIO) */
+
+#ifdef CONFIG_PPC_DCR_NATIVE
DEFINE_SPINLOCK(dcr_ind_lock);
-#endif /* !defined(CONFIG_PPC_DCR_NATIVE) */
+#endif /* defined(CONFIG_PPC_DCR_NATIVE) */
+
--- /dev/null
+/*
+ * Copyright (C) 2007-2008 Freescale Semiconductor, Inc. All rights reserved.
+ *
+ * Author: Tony Li <tony.li@freescale.com>
+ * Jason Jin <Jason.jin@freescale.com>
+ *
+ * The hwirq alloc and free code reuse from sysdev/mpic_msi.c
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; version 2 of the
+ * License.
+ *
+ */
+#include <linux/irq.h>
+#include <linux/bootmem.h>
+#include <linux/bitmap.h>
+#include <linux/msi.h>
+#include <linux/pci.h>
+#include <linux/of_platform.h>
+#include <sysdev/fsl_soc.h>
+#include <asm/prom.h>
+#include <asm/hw_irq.h>
+#include <asm/ppc-pci.h>
+#include "fsl_msi.h"
+
+struct fsl_msi_feature {
+ u32 fsl_pic_ip;
+ u32 msiir_offset;
+};
+
+static struct fsl_msi *fsl_msi;
+
+static inline u32 fsl_msi_read(u32 __iomem *base, unsigned int reg)
+{
+ return in_be32(base + (reg >> 2));
+}
+
+/*
+ * We do not need this actually. The MSIR register has been read once
+ * in the cascade interrupt. So, this MSI interrupt has been acked
+*/
+static void fsl_msi_end_irq(unsigned int virq)
+{
+}
+
+static struct irq_chip fsl_msi_chip = {
+ .mask = mask_msi_irq,
+ .unmask = unmask_msi_irq,
+ .ack = fsl_msi_end_irq,
+ .typename = " FSL-MSI ",
+};
+
+static int fsl_msi_host_map(struct irq_host *h, unsigned int virq,
+ irq_hw_number_t hw)
+{
+ struct irq_chip *chip = &fsl_msi_chip;
+
+ get_irq_desc(virq)->status |= IRQ_TYPE_EDGE_FALLING;
+
+ set_irq_chip_and_handler(virq, chip, handle_edge_irq);
+
+ return 0;
+}
+
+static struct irq_host_ops fsl_msi_host_ops = {
+ .map = fsl_msi_host_map,
+};
+
+static irq_hw_number_t fsl_msi_alloc_hwirqs(struct fsl_msi *msi, int num)
+{
+ unsigned long flags;
+ int order = get_count_order(num);
+ int offset;
+
+ spin_lock_irqsave(&msi->bitmap_lock, flags);
+
+ offset = bitmap_find_free_region(msi->fsl_msi_bitmap,
+ NR_MSI_IRQS, order);
+
+ spin_unlock_irqrestore(&msi->bitmap_lock, flags);
+
+ pr_debug("%s: allocated 0x%x (2^%d) at offset 0x%x\n",
+ __func__, num, order, offset);
+
+ return offset;
+}
+
+static void fsl_msi_free_hwirqs(struct fsl_msi *msi, int offset, int num)
+{
+ unsigned long flags;
+ int order = get_count_order(num);
+
+ pr_debug("%s: freeing 0x%x (2^%d) at offset 0x%x\n",
+ __func__, num, order, offset);
+
+ spin_lock_irqsave(&msi->bitmap_lock, flags);
+ bitmap_release_region(msi->fsl_msi_bitmap, offset, order);
+ spin_unlock_irqrestore(&msi->bitmap_lock, flags);
+}
+
+static int fsl_msi_free_dt_hwirqs(struct fsl_msi *msi)
+{
+ int i;
+ int len;
+ const u32 *p;
+
+ bitmap_allocate_region(msi->fsl_msi_bitmap, 0,
+ get_count_order(NR_MSI_IRQS));
+
+ p = of_get_property(msi->of_node, "msi-available-ranges", &len);
+
+ if (!p) {
+ /* No msi-available-ranges property,
+ * All the 256 MSI interrupts can be used
+ */
+ fsl_msi_free_hwirqs(msi, 0, 0x100);
+ return 0;
+ }
+
+ if ((len % (2 * sizeof(u32))) != 0) {
+ printk(KERN_WARNING "fsl_msi: Malformed msi-available-ranges "
+ "property on %s\n", msi->of_node->full_name);
+ return -EINVAL;
+ }
+
+ /* Format is: (<u32 start> <u32 count>)+ */
+ len /= 2 * sizeof(u32);
+ for (i = 0; i < len; i++, p += 2)
+ fsl_msi_free_hwirqs(msi, *p, *(p + 1));
+
+ return 0;
+}
+
+static int fsl_msi_init_allocator(struct fsl_msi *msi_data)
+{
+ int rc;
+ int size = BITS_TO_LONGS(NR_MSI_IRQS) * sizeof(u32);
+
+ msi_data->fsl_msi_bitmap = kzalloc(size, GFP_KERNEL);
+
+ if (msi_data->fsl_msi_bitmap == NULL) {
+ pr_debug("%s: ENOMEM allocating allocator bitmap!\n",
+ __func__);
+ return -ENOMEM;
+ }
+
+ rc = fsl_msi_free_dt_hwirqs(msi_data);
+ if (rc)
+ goto out_free;
+
+ return 0;
+out_free:
+ kfree(msi_data->fsl_msi_bitmap);
+
+ msi_data->fsl_msi_bitmap = NULL;
+ return rc;
+
+}
+
+static int fsl_msi_check_device(struct pci_dev *pdev, int nvec, int type)
+{
+ if (type == PCI_CAP_ID_MSIX)
+ pr_debug("fslmsi: MSI-X untested, trying anyway.\n");
+
+ return 0;
+}
+
+static void fsl_teardown_msi_irqs(struct pci_dev *pdev)
+{
+ struct msi_desc *entry;
+ struct fsl_msi *msi_data = fsl_msi;
+
+ list_for_each_entry(entry, &pdev->msi_list, list) {
+ if (entry->irq == NO_IRQ)
+ continue;
+ set_irq_msi(entry->irq, NULL);
+ fsl_msi_free_hwirqs(msi_data, virq_to_hw(entry->irq), 1);
+ irq_dispose_mapping(entry->irq);
+ }
+
+ return;
+}
+
+static void fsl_compose_msi_msg(struct pci_dev *pdev, int hwirq,
+ struct msi_msg *msg)
+{
+ struct fsl_msi *msi_data = fsl_msi;
+
+ msg->address_lo = msi_data->msi_addr_lo;
+ msg->address_hi = msi_data->msi_addr_hi;
+ msg->data = hwirq;
+
+ pr_debug("%s: allocated srs: %d, ibs: %d\n",
+ __func__, hwirq / IRQS_PER_MSI_REG, hwirq % IRQS_PER_MSI_REG);
+}
+
+static int fsl_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type)
+{
+ irq_hw_number_t hwirq;
+ int rc;
+ unsigned int virq;
+ struct msi_desc *entry;
+ struct msi_msg msg;
+ struct fsl_msi *msi_data = fsl_msi;
+
+ list_for_each_entry(entry, &pdev->msi_list, list) {
+ hwirq = fsl_msi_alloc_hwirqs(msi_data, 1);
+ if (hwirq < 0) {
+ rc = hwirq;
+ pr_debug("%s: fail allocating msi interrupt\n",
+ __func__);
+ goto out_free;
+ }
+
+ virq = irq_create_mapping(msi_data->irqhost, hwirq);
+
+ if (virq == NO_IRQ) {
+ pr_debug("%s: fail mapping hwirq 0x%lx\n",
+ __func__, hwirq);
+ fsl_msi_free_hwirqs(msi_data, hwirq, 1);
+ rc = -ENOSPC;
+ goto out_free;
+ }
+ set_irq_msi(virq, entry);
+
+ fsl_compose_msi_msg(pdev, hwirq, &msg);
+ write_msi_msg(virq, &msg);
+ }
+ return 0;
+
+out_free:
+ return rc;
+}
+
+static void fsl_msi_cascade(unsigned int irq, struct irq_desc *desc)
+{
+ unsigned int cascade_irq;
+ struct fsl_msi *msi_data = fsl_msi;
+ int msir_index = -1;
+ u32 msir_value = 0;
+ u32 intr_index;
+ u32 have_shift = 0;
+
+ spin_lock(&desc->lock);
+ if ((msi_data->feature & FSL_PIC_IP_MASK) == FSL_PIC_IP_IPIC) {
+ if (desc->chip->mask_ack)
+ desc->chip->mask_ack(irq);
+ else {
+ desc->chip->mask(irq);
+ desc->chip->ack(irq);
+ }
+ }
+
+ if (unlikely(desc->status & IRQ_INPROGRESS))
+ goto unlock;
+
+ msir_index = (int)desc->handler_data;
+
+ if (msir_index >= NR_MSI_REG)
+ cascade_irq = NO_IRQ;
+
+ desc->status |= IRQ_INPROGRESS;
+ switch (fsl_msi->feature & FSL_PIC_IP_MASK) {
+ case FSL_PIC_IP_MPIC:
+ msir_value = fsl_msi_read(msi_data->msi_regs,
+ msir_index * 0x10);
+ break;
+ case FSL_PIC_IP_IPIC:
+ msir_value = fsl_msi_read(msi_data->msi_regs, msir_index * 0x4);
+ break;
+ }
+
+ while (msir_value) {
+ intr_index = ffs(msir_value) - 1;
+
+ cascade_irq = irq_linear_revmap(msi_data->irqhost,
+ msir_index * IRQS_PER_MSI_REG +
+ intr_index + have_shift);
+ if (cascade_irq != NO_IRQ)
+ generic_handle_irq(cascade_irq);
+ have_shift += intr_index + 1;
+ msir_value = msir_value >> (intr_index + 1);
+ }
+ desc->status &= ~IRQ_INPROGRESS;
+
+ switch (msi_data->feature & FSL_PIC_IP_MASK) {
+ case FSL_PIC_IP_MPIC:
+ desc->chip->eoi(irq);
+ break;
+ case FSL_PIC_IP_IPIC:
+ if (!(desc->status & IRQ_DISABLED) && desc->chip->unmask)
+ desc->chip->unmask(irq);
+ break;
+ }
+unlock:
+ spin_unlock(&desc->lock);
+}
+
+static int __devinit fsl_of_msi_probe(struct of_device *dev,
+ const struct of_device_id *match)
+{
+ struct fsl_msi *msi;
+ struct resource res;
+ int err, i, count;
+ int rc;
+ int virt_msir;
+ const u32 *p;
+ struct fsl_msi_feature *features = match->data;
+
+ printk(KERN_DEBUG "Setting up Freescale MSI support\n");
+
+ msi = kzalloc(sizeof(struct fsl_msi), GFP_KERNEL);
+ if (!msi) {
+ dev_err(&dev->dev, "No memory for MSI structure\n");
+ err = -ENOMEM;
+ goto error_out;
+ }
+
+ msi->of_node = of_node_get(dev->node);
+
+ msi->irqhost = irq_alloc_host(of_node_get(dev->node),
+ IRQ_HOST_MAP_LINEAR,
+ NR_MSI_IRQS, &fsl_msi_host_ops, 0);
+ if (msi->irqhost == NULL) {
+ dev_err(&dev->dev, "No memory for MSI irqhost\n");
+ of_node_put(dev->node);
+ err = -ENOMEM;
+ goto error_out;
+ }
+
+ /* Get the MSI reg base */
+ err = of_address_to_resource(dev->node, 0, &res);
+ if (err) {
+ dev_err(&dev->dev, "%s resource error!\n",
+ dev->node->full_name);
+ goto error_out;
+ }
+
+ msi->msi_regs = ioremap(res.start, res.end - res.start + 1);
+ if (!msi->msi_regs) {
+ dev_err(&dev->dev, "ioremap problem failed\n");
+ goto error_out;
+ }
+
+ msi->feature = features->fsl_pic_ip;
+
+ msi->irqhost->host_data = msi;
+
+ msi->msi_addr_hi = 0x0;
+ msi->msi_addr_lo = res.start + features->msiir_offset;
+
+ rc = fsl_msi_init_allocator(msi);
+ if (rc) {
+ dev_err(&dev->dev, "Error allocating MSI bitmap\n");
+ goto error_out;
+ }
+
+ p = of_get_property(dev->node, "interrupts", &count);
+ if (!p) {
+ dev_err(&dev->dev, "no interrupts property found on %s\n",
+ dev->node->full_name);
+ err = -ENODEV;
+ goto error_out;
+ }
+ if (count % 8 != 0) {
+ dev_err(&dev->dev, "Malformed interrupts property on %s\n",
+ dev->node->full_name);
+ err = -EINVAL;
+ goto error_out;
+ }
+
+ count /= sizeof(u32);
+ for (i = 0; i < count / 2; i++) {
+ if (i > NR_MSI_REG)
+ break;
+ virt_msir = irq_of_parse_and_map(dev->node, i);
+ if (virt_msir != NO_IRQ) {
+ set_irq_data(virt_msir, (void *)i);
+ set_irq_chained_handler(virt_msir, fsl_msi_cascade);
+ }
+ }
+
+ fsl_msi = msi;
+
+ WARN_ON(ppc_md.setup_msi_irqs);
+ ppc_md.setup_msi_irqs = fsl_setup_msi_irqs;
+ ppc_md.teardown_msi_irqs = fsl_teardown_msi_irqs;
+ ppc_md.msi_check_device = fsl_msi_check_device;
+ return 0;
+error_out:
+ kfree(msi);
+ return err;
+}
+
+static const struct fsl_msi_feature mpic_msi_feature = {
+ .fsl_pic_ip = FSL_PIC_IP_MPIC,
+ .msiir_offset = 0x140,
+};
+
+static const struct fsl_msi_feature ipic_msi_feature = {
+ .fsl_pic_ip = FSL_PIC_IP_IPIC,
+ .msiir_offset = 0x38,
+};
+
+static const struct of_device_id fsl_of_msi_ids[] = {
+ {
+ .compatible = "fsl,mpic-msi",
+ .data = (void *)&mpic_msi_feature,
+ },
+ {
+ .compatible = "fsl,ipic-msi",
+ .data = (void *)&ipic_msi_feature,
+ },
+ {}
+};
+
+static struct of_platform_driver fsl_of_msi_driver = {
+ .name = "fsl-msi",
+ .match_table = fsl_of_msi_ids,
+ .probe = fsl_of_msi_probe,
+};
+
+static __init int fsl_of_msi_init(void)
+{
+ return of_register_platform_driver(&fsl_of_msi_driver);
+}
+
+subsys_initcall(fsl_of_msi_init);
--- /dev/null
+/*
+ * Copyright (C) 2007-2008 Freescale Semiconductor, Inc. All rights reserved.
+ *
+ * Author: Tony Li <tony.li@freescale.com>
+ * Jason Jin <Jason.jin@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; version 2 of the
+ * License.
+ *
+ */
+#ifndef _POWERPC_SYSDEV_FSL_MSI_H
+#define _POWERPC_SYSDEV_FSL_MSI_H
+
+#define NR_MSI_REG 8
+#define IRQS_PER_MSI_REG 32
+#define NR_MSI_IRQS (NR_MSI_REG * IRQS_PER_MSI_REG)
+
+#define FSL_PIC_IP_MASK 0x0000000F
+#define FSL_PIC_IP_MPIC 0x00000001
+#define FSL_PIC_IP_IPIC 0x00000002
+
+struct fsl_msi {
+ /* Device node of the MSI interrupt*/
+ struct device_node *of_node;
+
+ struct irq_host *irqhost;
+
+ unsigned long cascade_irq;
+
+ u32 msi_addr_lo;
+ u32 msi_addr_hi;
+ void __iomem *msi_regs;
+ u32 feature;
+
+ unsigned long *fsl_msi_bitmap;
+ spinlock_t bitmap_lock;
+};
+
+#endif /* _POWERPC_SYSDEV_FSL_MSI_H */
+
}
}
+static void __init setup_pci_pcsrbar(struct pci_controller *hose)
+{
+#ifdef CONFIG_PCI_MSI
+ phys_addr_t immr_base;
+
+ immr_base = get_immrbase();
+ early_write_config_dword(hose, 0, 0, PCI_BASE_ADDRESS_0, immr_base);
+#endif
+}
+
static int fsl_pcie_bus_fixup;
static void __init quirk_fsl_pcie_header(struct pci_dev *dev)
/* Setup PEX window registers */
setup_pci_atmu(hose, &rsrc);
+ /* Setup PEXCSRBAR */
+ setup_pci_pcsrbar(hose);
return 0;
}
{"dallas,ds1340", "ds1340"},
{"stm,m41t00", "m41t00"},
{"dallas,ds1374", "ds1374"},
+ {"cirrus,cs4270", "cs4270"},
};
static int __init of_find_i2c_driver(struct device_node *node,
return -ENOMEM;
return 0;
}
+
+ pr_warning("fsl_soc.c: unrecognized i2c node %s\n",
+ (const char *) of_get_property(node, "compatible", NULL));
+
return -ENODEV;
}
struct resource r[2];
struct fsl_i2c_platform_data i2c_data;
const unsigned char *flags = NULL;
+ int idx;
+ const u32 *iprop;
memset(&r, 0, sizeof(r));
memset(&i2c_data, 0, sizeof(i2c_data));
of_irq_to_resource(np, 0, &r[1]);
- i2c_dev = platform_device_register_simple("fsl-i2c", i, r, 2);
+ iprop = of_get_property(np, "cell-index", NULL);
+ idx = iprop ? *iprop : i;
+
+ i2c_dev = platform_device_register_simple("fsl-i2c", idx, r, 2);
if (IS_ERR(i2c_dev)) {
ret = PTR_ERR(i2c_dev);
goto err;
if (ret)
goto unreg;
- of_register_i2c_devices(np, i++);
+ of_register_i2c_devices(np, idx);
+ i++;
}
return 0;
mpic->num_cpus = ((greg_feature & MPIC_GREG_FEATURE_LAST_CPU_MASK)
>> MPIC_GREG_FEATURE_LAST_CPU_SHIFT) + 1;
if (isu_size == 0)
- mpic->num_sources =
- ((greg_feature & MPIC_GREG_FEATURE_LAST_SRC_MASK)
- >> MPIC_GREG_FEATURE_LAST_SRC_SHIFT) + 1;
+ if (flags & MPIC_BROKEN_FRR_NIRQS)
+ mpic->num_sources = mpic->irq_count;
+ else
+ mpic->num_sources =
+ ((greg_feature & MPIC_GREG_FEATURE_LAST_SRC_MASK)
+ >> MPIC_GREG_FEATURE_LAST_SRC_SHIFT) + 1;
/* Map the per-CPU registers */
for (i = 0; i < mpic->num_cpus; i++) {
#include <asm/hw_irq.h>
#include <asm/ppc-pci.h>
+#include <sysdev/mpic.h>
static void __mpic_msi_reserve_hwirq(struct mpic *mpic, irq_hw_number_t hwirq)
{
unsigned int virq;
struct msi_desc *entry;
struct msi_msg msg;
+ int ret;
pr_debug("pasemi_msi_setup_msi_irqs, pdev %p nvec %d type %d\n",
pdev, nvec, type);
* few MSIs for someone, but restrictions will apply to how the
* sources can be changed independently.
*/
- hwirq = mpic_msi_alloc_hwirqs(msi_mpic, ALLOC_CHUNK);
- if (hwirq < 0) {
+ ret = mpic_msi_alloc_hwirqs(msi_mpic, ALLOC_CHUNK);
+ hwirq = ret;
+ if (ret < 0) {
pr_debug("pasemi_msi: failed allocating hwirq\n");
return hwirq;
}
struct msi_desc *entry;
struct msi_msg msg;
u64 addr;
+ int ret;
addr = find_ht_magic_addr(pdev);
msg.address_lo = addr & 0xFFFFFFFF;
msg.address_hi = addr >> 32;
list_for_each_entry(entry, &pdev->msi_list, list) {
- hwirq = mpic_msi_alloc_hwirqs(msi_mpic, 1);
- if (hwirq < 0) {
+ ret = mpic_msi_alloc_hwirqs(msi_mpic, 1);
+ if (ret < 0) {
pr_debug("u3msi: failed allocating hwirq\n");
- return hwirq;
+ return ret;
}
+ hwirq = ret;
virq = irq_create_mapping(msi_mpic->irqhost, hwirq);
if (virq == NO_IRQ) {
#include <linux/console.h>
#include <linux/mv643xx.h>
#include <linux/platform_device.h>
+#include <linux/of_platform.h>
#include <asm/prom.h>
* PowerPC of_platform_bus_type. They support platform_bus_type instead.
*/
+static struct of_device_id __initdata of_mv64x60_devices[] = {
+ { .compatible = "marvell,mv64306-devctrl", },
+ {}
+};
+
/*
* Create MPSC platform devices
*/
of_node_put(np);
}
+ /* Now add every node that is on the device bus */
+ for_each_compatible_node(np, NULL, "marvell,mv64360")
+ of_platform_bus_probe(np, of_mv64x60_devices, NULL);
+
return 0;
}
arch_initcall(mv64x60_device_setup);
#define skipbl xmon_skipbl
#ifdef CONFIG_SMP
-cpumask_t cpus_in_xmon = CPU_MASK_NONE;
+static cpumask_t cpus_in_xmon = CPU_MASK_NONE;
static unsigned long xmon_taken = 1;
static int xmon_owner;
static int xmon_gate;
static void dump_tlb_44x(void);
#endif
-int xmon_no_auto_backtrace;
+static int xmon_no_auto_backtrace;
extern void xmon_enter(void);
extern void xmon_leave(void);
{
xmon_speaker = 0;
}
+
+int cpus_are_in_xmon(void)
+{
+ return !cpus_empty(cpus_in_xmon);
+}
#endif
static int xmon_core(struct pt_regs *regs, int fromipi)
{
if ((regs->msr & (MSR_IR|MSR_PR|MSR_SF)) != (MSR_IR|MSR_SF))
return 0;
- if (iabr == 0)
+ if (iabr == NULL)
return 0;
xmon_core(regs, 0);
return 1;
} else {
/* assume a breakpoint address */
bp = at_breakpoint(a);
- if (bp == 0) {
+ if (bp == NULL) {
printf("No breakpoint at %x\n", a);
break;
}
#endif
}
-void excprint(struct pt_regs *fp)
+static void excprint(struct pt_regs *fp)
{
unsigned long trap;
print_bug_trap(fp);
}
-void prregs(struct pt_regs *fp)
+static void prregs(struct pt_regs *fp)
{
int n, trap;
unsigned long base;
printf("dar = "REG" dsisr = %.8lx\n", fp->dar, fp->dsisr);
}
-void cacheflush(void)
+static void cacheflush(void)
{
int cmd;
unsigned long nflush;
catch_memory_errors = 0;
}
-unsigned long
+static unsigned long
read_spr(int n)
{
unsigned int instrs[2];
return ret;
}
-void
+static void
write_spr(int n, unsigned long val)
{
unsigned int instrs[2];
extern char exc_prolog;
extern char dec_exc;
-void super_regs(void)
+static void super_regs(void)
{
int cmd;
unsigned long val;
/*
* Stuff for reading and writing memory safely
*/
-int
+static int
mread(unsigned long adrs, void *buf, int size)
{
volatile int n;
return n;
}
-int
+static int
mwrite(unsigned long adrs, void *buf, int size)
{
volatile int n;
#define SWAP(a, b, t) ((t) = (a), (a) = (b), (b) = (t))
-void
+static void
byterev(unsigned char *val, int size)
{
int t;
" x exit this mode\n"
"";
-void
+static void
memex(void)
{
int cmd, inc, i, nslash;
}
}
-int
+static int
bsesc(void)
{
int c;
#define isxdigit(c) (('0' <= (c) && (c) <= '9') \
|| ('a' <= (c) && (c) <= 'f') \
|| ('A' <= (c) && (c) <= 'F'))
-void
+static void
dump(void)
{
int c;
}
}
-void
+static void
prdump(unsigned long adrs, long ndump)
{
long n, m, c, r, nr;
typedef int (*instruction_dump_func)(unsigned long inst, unsigned long addr);
-int
+static int
generic_inst_dump(unsigned long adr, long count, int praddr,
instruction_dump_func dump_func)
{
return adr - first_adr;
}
-int
+static int
ppc_inst_dump(unsigned long adr, long count, int praddr)
{
return generic_inst_dump(adr, count, praddr, print_insn_powerpc);
static unsigned long mcount; /* # bytes to affect */
static unsigned long mdiffs; /* max # differences to print */
-void
+static void
memops(int cmd)
{
scanhex((void *)&mdest);
}
}
-void
+static void
memdiffs(unsigned char *p1, unsigned char *p2, unsigned nb, unsigned maxpr)
{
unsigned n, prt;
static unsigned mend;
static unsigned mask;
-void
+static void
memlocate(void)
{
unsigned a, n;
static unsigned long mskip = 0x1000;
static unsigned long mlim = 0xffffffff;
-void
+static void
memzcan(void)
{
unsigned char v;
printf("%.8x\n", a - mskip);
}
-void proccall(void)
+static void proccall(void)
{
unsigned long args[8];
unsigned long ret;
return 1;
}
-void
+static void
scannl(void)
{
int c;
c = inchar();
}
-int hexdigit(int c)
+static int hexdigit(int c)
{
if( '0' <= c && c <= '9' )
return c - '0';
static char line[256];
static char *lineptr;
-void
+static void
flush_input(void)
{
lineptr = NULL;
}
-int
+static int
inchar(void)
{
if (lineptr == NULL || *lineptr == 0) {
return *lineptr++;
}
-void
+static void
take_input(char *str)
{
lineptr = str;
}
}
#endif /* CONFIG_44x */
-void xmon_init(int enable)
+
+static void xmon_init(int enable)
{
#ifdef CONFIG_PPC_ISERIES
if (firmware_has_feature(FW_FEATURE_ISERIES))
/* Check current_thread_info()->flags */
rlwinm r9,r1,0,0,18
lwz r9,TI_FLAGS(r9)
- andi. r0,r9,(_TIF_SIGPENDING|_TIF_RESTORE_SIGMASK|_TIF_NEED_RESCHED)
+ andi. r0,r9,_TIF_USER_WORK_MASK
bne do_work
restore_user:
lwz r9,TI_FLAGS(r9)
andi. r0,r9,_TIF_NEED_RESCHED
bne- do_resched
- andi. r0,r9,_TIF_SIGPENDING
+ andi. r0,r9,_TIF_USER_WORK_MASK
beq restore_user
do_user_signal: /* r10 contains MSR_KERNEL here */
ori r10,r10,MSR_EE
return poll_mask;
}
-#if defined(CONFIG_XMON) && defined(CONFIG_SMP)
-extern cpumask_t cpus_in_xmon;
-#else
-static const cpumask_t cpus_in_xmon = CPU_MASK_NONE;
-#endif
-
/*
* This kthread is either polling or interrupt driven. This is determined by
* calling hvc_poll() who determines whether a console adapter support
hvc_kicked = 0;
try_to_freeze();
wmb();
- if (cpus_empty(cpus_in_xmon)) {
+ if (!cpus_are_in_xmon()) {
spin_lock(&hvc_structs_lock);
list_for_each_entry(hp, &hvc_structs, next) {
poll_mask |= hvc_poll(hp);
/* remove a vterm from hvc tty operation (modele_exit or hotplug remove) */
extern int __devexit hvc_remove(struct hvc_struct *hp);
+
+#if defined(CONFIG_XMON) && defined(CONFIG_SMP)
+#include <asm/xmon.h>
+#else
+static inline int cpus_are_in_xmon(void)
+{
+ return 0;
+}
+#endif
+
#endif // HVC_CONSOLE_H
struct of_device *ofdev = to_of_device(dev);
int len;
- len = of_device_get_modalias(ofdev, buf, PAGE_SIZE);
+ len = of_device_get_modalias(ofdev, buf, PAGE_SIZE - 2);
buf[len] = '\n';
buf[len+1] = 0;
return len+1;
}
+static ssize_t devspec_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct of_device *ofdev;
+
+ ofdev = to_of_device(dev);
+ return sprintf(buf, "%s\n", ofdev->node->full_name);
+}
+
macio_config_of_attr (name, "%s\n");
macio_config_of_attr (type, "%s\n");
__ATTR_RO(type),
__ATTR_RO(compatible),
__ATTR_RO(modalias),
+ __ATTR_RO(devspec),
__ATTR_NULL
};
Say Y here if you want to use the NE2000 compatible
controller on the Renesas H8/300 processor.
-source "drivers/net/fec_8xx/Kconfig"
source "drivers/net/fs_enet/Kconfig"
endif # NET_ETHERNET
obj-$(CONFIG_SMC911X) += smc911x.o
obj-$(CONFIG_BFIN_MAC) += bfin_mac.o
obj-$(CONFIG_DM9000) += dm9000.o
-obj-$(CONFIG_FEC_8XX) += fec_8xx/
obj-$(CONFIG_PASEMI_MAC) += pasemi_mac_driver.o
pasemi_mac_driver-objs := pasemi_mac.o pasemi_mac_ethtool.o
obj-$(CONFIG_MLX4_CORE) += mlx4/
+++ /dev/null
-config FEC_8XX
- tristate "Motorola 8xx FEC driver"
- depends on 8XX
- select MII
-
-config FEC_8XX_GENERIC_PHY
- bool "Support any generic PHY"
- depends on FEC_8XX
- default y
-
-config FEC_8XX_DM9161_PHY
- bool "Support DM9161 PHY"
- depends on FEC_8XX
- default n
-
-config FEC_8XX_LXT971_PHY
- bool "Support LXT971/LXT972 PHY"
- depends on FEC_8XX
- default n
-
+++ /dev/null
-#
-# Makefile for the Motorola 8xx FEC ethernet controller
-#
-
-obj-$(CONFIG_FEC_8XX) += fec_8xx.o
-
-fec_8xx-objs := fec_main.o fec_mii.o
-
-# the platform instantatiation objects
-ifeq ($(CONFIG_NETTA),y)
-fec_8xx-objs += fec_8xx-netta.o
-endif
+++ /dev/null
-/*
- * FEC instantatiation file for NETTA
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/string.h>
-#include <linux/ptrace.h>
-#include <linux/errno.h>
-#include <linux/ioport.h>
-#include <linux/slab.h>
-#include <linux/interrupt.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/skbuff.h>
-#include <linux/spinlock.h>
-#include <linux/mii.h>
-#include <linux/ethtool.h>
-#include <linux/bitops.h>
-
-#include <asm/8xx_immap.h>
-#include <asm/pgtable.h>
-#include <asm/mpc8xx.h>
-#include <asm/irq.h>
-#include <asm/uaccess.h>
-#include <asm/cpm1.h>
-
-#include "fec_8xx.h"
-
-/*************************************************/
-
-static struct fec_platform_info fec1_info = {
- .fec_no = 0,
- .use_mdio = 1,
- .phy_addr = 8,
- .fec_irq = SIU_LEVEL1,
- .phy_irq = CPM_IRQ_OFFSET + CPMVEC_PIO_PC6,
- .rx_ring = 128,
- .tx_ring = 16,
- .rx_copybreak = 240,
- .use_napi = 1,
- .napi_weight = 17,
-};
-
-static struct fec_platform_info fec2_info = {
- .fec_no = 1,
- .use_mdio = 1,
- .phy_addr = 2,
- .fec_irq = SIU_LEVEL3,
- .phy_irq = CPM_IRQ_OFFSET + CPMVEC_PIO_PC7,
- .rx_ring = 128,
- .tx_ring = 16,
- .rx_copybreak = 240,
- .use_napi = 1,
- .napi_weight = 17,
-};
-
-static struct net_device *fec1_dev;
-static struct net_device *fec2_dev;
-
-/* XXX custom u-boot & Linux startup needed */
-extern const char *__fw_getenv(const char *var);
-
-/* access ports */
-#define setbits32(_addr, _v) __fec_out32(&(_addr), __fec_in32(&(_addr)) | (_v))
-#define clrbits32(_addr, _v) __fec_out32(&(_addr), __fec_in32(&(_addr)) & ~(_v))
-
-#define setbits16(_addr, _v) __fec_out16(&(_addr), __fec_in16(&(_addr)) | (_v))
-#define clrbits16(_addr, _v) __fec_out16(&(_addr), __fec_in16(&(_addr)) & ~(_v))
-
-int fec_8xx_platform_init(void)
-{
- immap_t *immap = (immap_t *)IMAP_ADDR;
- bd_t *bd = (bd_t *) __res;
- const char *s;
- char *e;
- int i;
-
- /* use MDC for MII */
- setbits16(immap->im_ioport.iop_pdpar, 0x0080);
- clrbits16(immap->im_ioport.iop_pddir, 0x0080);
-
- /* configure FEC1 pins */
- setbits16(immap->im_ioport.iop_papar, 0xe810);
- setbits16(immap->im_ioport.iop_padir, 0x0810);
- clrbits16(immap->im_ioport.iop_padir, 0xe000);
-
- setbits32(immap->im_cpm.cp_pbpar, 0x00000001);
- clrbits32(immap->im_cpm.cp_pbdir, 0x00000001);
-
- setbits32(immap->im_cpm.cp_cptr, 0x00000100);
- clrbits32(immap->im_cpm.cp_cptr, 0x00000050);
-
- clrbits16(immap->im_ioport.iop_pcpar, 0x0200);
- clrbits16(immap->im_ioport.iop_pcdir, 0x0200);
- clrbits16(immap->im_ioport.iop_pcso, 0x0200);
- setbits16(immap->im_ioport.iop_pcint, 0x0200);
-
- /* configure FEC2 pins */
- setbits32(immap->im_cpm.cp_pepar, 0x00039620);
- setbits32(immap->im_cpm.cp_pedir, 0x00039620);
- setbits32(immap->im_cpm.cp_peso, 0x00031000);
- clrbits32(immap->im_cpm.cp_peso, 0x00008620);
-
- setbits32(immap->im_cpm.cp_cptr, 0x00000080);
- clrbits32(immap->im_cpm.cp_cptr, 0x00000028);
-
- clrbits16(immap->im_ioport.iop_pcpar, 0x0200);
- clrbits16(immap->im_ioport.iop_pcdir, 0x0200);
- clrbits16(immap->im_ioport.iop_pcso, 0x0200);
- setbits16(immap->im_ioport.iop_pcint, 0x0200);
-
- /* fill up */
- fec1_info.sys_clk = bd->bi_intfreq;
- fec2_info.sys_clk = bd->bi_intfreq;
-
- s = __fw_getenv("ethaddr");
- if (s != NULL) {
- for (i = 0; i < 6; i++) {
- fec1_info.macaddr[i] = simple_strtoul(s, &e, 16);
- if (*e)
- s = e + 1;
- }
- }
-
- s = __fw_getenv("eth1addr");
- if (s != NULL) {
- for (i = 0; i < 6; i++) {
- fec2_info.macaddr[i] = simple_strtoul(s, &e, 16);
- if (*e)
- s = e + 1;
- }
- }
-
- fec_8xx_init_one(&fec1_info, &fec1_dev);
- fec_8xx_init_one(&fec2_info, &fec2_dev);
-
- return fec1_dev != NULL && fec2_dev != NULL ? 0 : -1;
-}
-
-void fec_8xx_platform_cleanup(void)
-{
- if (fec2_dev != NULL)
- fec_8xx_cleanup_one(fec2_dev);
-
- if (fec1_dev != NULL)
- fec_8xx_cleanup_one(fec1_dev);
-}
+++ /dev/null
-#ifndef FEC_8XX_H
-#define FEC_8XX_H
-
-#include <linux/mii.h>
-#include <linux/netdevice.h>
-
-#include <linux/types.h>
-
-/* HW info */
-
-/* CRC polynomium used by the FEC for the multicast group filtering */
-#define FEC_CRC_POLY 0x04C11DB7
-
-#define MII_ADVERTISE_HALF (ADVERTISE_100HALF | \
- ADVERTISE_10HALF | ADVERTISE_CSMA)
-#define MII_ADVERTISE_ALL (ADVERTISE_100FULL | \
- ADVERTISE_10FULL | MII_ADVERTISE_HALF)
-
-/* Interrupt events/masks.
-*/
-#define FEC_ENET_HBERR 0x80000000U /* Heartbeat error */
-#define FEC_ENET_BABR 0x40000000U /* Babbling receiver */
-#define FEC_ENET_BABT 0x20000000U /* Babbling transmitter */
-#define FEC_ENET_GRA 0x10000000U /* Graceful stop complete */
-#define FEC_ENET_TXF 0x08000000U /* Full frame transmitted */
-#define FEC_ENET_TXB 0x04000000U /* A buffer was transmitted */
-#define FEC_ENET_RXF 0x02000000U /* Full frame received */
-#define FEC_ENET_RXB 0x01000000U /* A buffer was received */
-#define FEC_ENET_MII 0x00800000U /* MII interrupt */
-#define FEC_ENET_EBERR 0x00400000U /* SDMA bus error */
-
-#define FEC_ECNTRL_PINMUX 0x00000004
-#define FEC_ECNTRL_ETHER_EN 0x00000002
-#define FEC_ECNTRL_RESET 0x00000001
-
-#define FEC_RCNTRL_BC_REJ 0x00000010
-#define FEC_RCNTRL_PROM 0x00000008
-#define FEC_RCNTRL_MII_MODE 0x00000004
-#define FEC_RCNTRL_DRT 0x00000002
-#define FEC_RCNTRL_LOOP 0x00000001
-
-#define FEC_TCNTRL_FDEN 0x00000004
-#define FEC_TCNTRL_HBC 0x00000002
-#define FEC_TCNTRL_GTS 0x00000001
-
-/* values for MII phy_status */
-
-#define PHY_CONF_ANE 0x0001 /* 1 auto-negotiation enabled */
-#define PHY_CONF_LOOP 0x0002 /* 1 loopback mode enabled */
-#define PHY_CONF_SPMASK 0x00f0 /* mask for speed */
-#define PHY_CONF_10HDX 0x0010 /* 10 Mbit half duplex supported */
-#define PHY_CONF_10FDX 0x0020 /* 10 Mbit full duplex supported */
-#define PHY_CONF_100HDX 0x0040 /* 100 Mbit half duplex supported */
-#define PHY_CONF_100FDX 0x0080 /* 100 Mbit full duplex supported */
-
-#define PHY_STAT_LINK 0x0100 /* 1 up - 0 down */
-#define PHY_STAT_FAULT 0x0200 /* 1 remote fault */
-#define PHY_STAT_ANC 0x0400 /* 1 auto-negotiation complete */
-#define PHY_STAT_SPMASK 0xf000 /* mask for speed */
-#define PHY_STAT_10HDX 0x1000 /* 10 Mbit half duplex selected */
-#define PHY_STAT_10FDX 0x2000 /* 10 Mbit full duplex selected */
-#define PHY_STAT_100HDX 0x4000 /* 100 Mbit half duplex selected */
-#define PHY_STAT_100FDX 0x8000 /* 100 Mbit full duplex selected */
-
-typedef struct phy_info {
- unsigned int id;
- const char *name;
- void (*startup) (struct net_device * dev);
- void (*shutdown) (struct net_device * dev);
- void (*ack_int) (struct net_device * dev);
-} phy_info_t;
-
-/* The FEC stores dest/src/type, data, and checksum for receive packets.
- */
-#define MAX_MTU 1508 /* Allow fullsized pppoe packets over VLAN */
-#define MIN_MTU 46 /* this is data size */
-#define CRC_LEN 4
-
-#define PKT_MAXBUF_SIZE (MAX_MTU+ETH_HLEN+CRC_LEN)
-#define PKT_MINBUF_SIZE (MIN_MTU+ETH_HLEN+CRC_LEN)
-
-/* Must be a multiple of 4 */
-#define PKT_MAXBLR_SIZE ((PKT_MAXBUF_SIZE+3) & ~3)
-/* This is needed so that invalidate_xxx wont invalidate too much */
-#define ENET_RX_FRSIZE L1_CACHE_ALIGN(PKT_MAXBUF_SIZE)
-
-/* platform interface */
-
-struct fec_platform_info {
- int fec_no; /* FEC index */
- int use_mdio; /* use external MII */
- int phy_addr; /* the phy address */
- int fec_irq, phy_irq; /* the irq for the controller */
- int rx_ring, tx_ring; /* number of buffers on rx */
- int sys_clk; /* system clock */
- __u8 macaddr[6]; /* mac address */
- int rx_copybreak; /* limit we copy small frames */
- int use_napi; /* use NAPI */
- int napi_weight; /* NAPI weight */
-};
-
-/* forward declaration */
-struct fec;
-
-struct fec_enet_private {
- spinlock_t lock; /* during all ops except TX pckt processing */
- spinlock_t tx_lock; /* during fec_start_xmit and fec_tx */
- struct net_device *dev;
- struct napi_struct napi;
- int fecno;
- struct fec *fecp;
- const struct fec_platform_info *fpi;
- int rx_ring, tx_ring;
- dma_addr_t ring_mem_addr;
- void *ring_base;
- struct sk_buff **rx_skbuff;
- struct sk_buff **tx_skbuff;
- cbd_t *rx_bd_base; /* Address of Rx and Tx buffers. */
- cbd_t *tx_bd_base;
- cbd_t *dirty_tx; /* ring entries to be free()ed. */
- cbd_t *cur_rx;
- cbd_t *cur_tx;
- int tx_free;
- struct net_device_stats stats;
- struct timer_list phy_timer_list;
- const struct phy_info *phy;
- unsigned int fec_phy_speed;
- __u32 msg_enable;
- struct mii_if_info mii_if;
-};
-
-/***************************************************************************/
-
-void fec_restart(struct net_device *dev, int duplex, int speed);
-void fec_stop(struct net_device *dev);
-
-/***************************************************************************/
-
-int fec_mii_read(struct net_device *dev, int phy_id, int location);
-void fec_mii_write(struct net_device *dev, int phy_id, int location, int value);
-
-int fec_mii_phy_id_detect(struct net_device *dev);
-void fec_mii_startup(struct net_device *dev);
-void fec_mii_shutdown(struct net_device *dev);
-void fec_mii_ack_int(struct net_device *dev);
-
-void fec_mii_link_status_change_check(struct net_device *dev, int init_media);
-
-/***************************************************************************/
-
-#define FEC1_NO 0x00
-#define FEC2_NO 0x01
-#define FEC3_NO 0x02
-
-int fec_8xx_init_one(const struct fec_platform_info *fpi,
- struct net_device **devp);
-int fec_8xx_cleanup_one(struct net_device *dev);
-
-/***************************************************************************/
-
-#define DRV_MODULE_NAME "fec_8xx"
-#define PFX DRV_MODULE_NAME ": "
-#define DRV_MODULE_VERSION "0.1"
-#define DRV_MODULE_RELDATE "May 6, 2004"
-
-/***************************************************************************/
-
-int fec_8xx_platform_init(void);
-void fec_8xx_platform_cleanup(void);
-
-/***************************************************************************/
-
-/* FEC access macros */
-#if defined(CONFIG_8xx)
-/* for a 8xx __raw_xxx's are sufficient */
-#define __fec_out32(addr, x) __raw_writel(x, addr)
-#define __fec_out16(addr, x) __raw_writew(x, addr)
-#define __fec_in32(addr) __raw_readl(addr)
-#define __fec_in16(addr) __raw_readw(addr)
-#else
-/* for others play it safe */
-#define __fec_out32(addr, x) out_be32(addr, x)
-#define __fec_out16(addr, x) out_be16(addr, x)
-#define __fec_in32(addr) in_be32(addr)
-#define __fec_in16(addr) in_be16(addr)
-#endif
-
-/* write */
-#define FW(_fecp, _reg, _v) __fec_out32(&(_fecp)->fec_ ## _reg, (_v))
-
-/* read */
-#define FR(_fecp, _reg) __fec_in32(&(_fecp)->fec_ ## _reg)
-
-/* set bits */
-#define FS(_fecp, _reg, _v) FW(_fecp, _reg, FR(_fecp, _reg) | (_v))
-
-/* clear bits */
-#define FC(_fecp, _reg, _v) FW(_fecp, _reg, FR(_fecp, _reg) & ~(_v))
-
-/* buffer descriptor access macros */
-
-/* write */
-#define CBDW_SC(_cbd, _sc) __fec_out16(&(_cbd)->cbd_sc, (_sc))
-#define CBDW_DATLEN(_cbd, _datlen) __fec_out16(&(_cbd)->cbd_datlen, (_datlen))
-#define CBDW_BUFADDR(_cbd, _bufaddr) __fec_out32(&(_cbd)->cbd_bufaddr, (_bufaddr))
-
-/* read */
-#define CBDR_SC(_cbd) __fec_in16(&(_cbd)->cbd_sc)
-#define CBDR_DATLEN(_cbd) __fec_in16(&(_cbd)->cbd_datlen)
-#define CBDR_BUFADDR(_cbd) __fec_in32(&(_cbd)->cbd_bufaddr)
-
-/* set bits */
-#define CBDS_SC(_cbd, _sc) CBDW_SC(_cbd, CBDR_SC(_cbd) | (_sc))
-
-/* clear bits */
-#define CBDC_SC(_cbd, _sc) CBDW_SC(_cbd, CBDR_SC(_cbd) & ~(_sc))
-
-/***************************************************************************/
-
-#endif
+++ /dev/null
-/*
- * Fast Ethernet Controller (FEC) driver for Motorola MPC8xx.
- *
- * Copyright (c) 2003 Intracom S.A.
- * by Pantelis Antoniou <panto@intracom.gr>
- *
- * Heavily based on original FEC driver by Dan Malek <dan@embeddededge.com>
- * and modifications by Joakim Tjernlund <joakim.tjernlund@lumentis.se>
- *
- * Released under the GPL
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/string.h>
-#include <linux/ptrace.h>
-#include <linux/errno.h>
-#include <linux/ioport.h>
-#include <linux/slab.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/skbuff.h>
-#include <linux/spinlock.h>
-#include <linux/mii.h>
-#include <linux/ethtool.h>
-#include <linux/bitops.h>
-#include <linux/dma-mapping.h>
-
-#include <asm/8xx_immap.h>
-#include <asm/pgtable.h>
-#include <asm/mpc8xx.h>
-#include <asm/irq.h>
-#include <asm/uaccess.h>
-#include <asm/cpm1.h>
-
-#include "fec_8xx.h"
-
-/*************************************************/
-
-#define FEC_MAX_MULTICAST_ADDRS 64
-
-/*************************************************/
-
-static char version[] __devinitdata =
- DRV_MODULE_NAME ".c:v" DRV_MODULE_VERSION " (" DRV_MODULE_RELDATE ")" "\n";
-
-MODULE_AUTHOR("Pantelis Antoniou <panto@intracom.gr>");
-MODULE_DESCRIPTION("Motorola 8xx FEC ethernet driver");
-MODULE_LICENSE("GPL");
-
-int fec_8xx_debug = -1; /* -1 == use FEC_8XX_DEF_MSG_ENABLE as value */
-module_param(fec_8xx_debug, int, 0);
-MODULE_PARM_DESC(fec_8xx_debug,
- "FEC 8xx bitmapped debugging message enable value");
-
-
-/*************************************************/
-
-/*
- * Delay to wait for FEC reset command to complete (in us)
- */
-#define FEC_RESET_DELAY 50
-
-/*****************************************************************************************/
-
-static void fec_whack_reset(fec_t * fecp)
-{
- int i;
-
- /*
- * Whack a reset. We should wait for this.
- */
- FW(fecp, ecntrl, FEC_ECNTRL_PINMUX | FEC_ECNTRL_RESET);
- for (i = 0;
- (FR(fecp, ecntrl) & FEC_ECNTRL_RESET) != 0 && i < FEC_RESET_DELAY;
- i++)
- udelay(1);
-
- if (i == FEC_RESET_DELAY)
- printk(KERN_WARNING "FEC Reset timeout!\n");
-
-}
-
-/****************************************************************************/
-
-/*
- * Transmitter timeout.
- */
-#define TX_TIMEOUT (2*HZ)
-
-/****************************************************************************/
-
-/*
- * Returns the CRC needed when filling in the hash table for
- * multicast group filtering
- * pAddr must point to a MAC address (6 bytes)
- */
-static __u32 fec_mulicast_calc_crc(char *pAddr)
-{
- u8 byte;
- int byte_count;
- int bit_count;
- __u32 crc = 0xffffffff;
- u8 msb;
-
- for (byte_count = 0; byte_count < 6; byte_count++) {
- byte = pAddr[byte_count];
- for (bit_count = 0; bit_count < 8; bit_count++) {
- msb = crc >> 31;
- crc <<= 1;
- if (msb ^ (byte & 0x1)) {
- crc ^= FEC_CRC_POLY;
- }
- byte >>= 1;
- }
- }
- return (crc);
-}
-
-/*
- * Set or clear the multicast filter for this adaptor.
- * Skeleton taken from sunlance driver.
- * The CPM Ethernet implementation allows Multicast as well as individual
- * MAC address filtering. Some of the drivers check to make sure it is
- * a group multicast address, and discard those that are not. I guess I
- * will do the same for now, but just remove the test if you want
- * individual filtering as well (do the upper net layers want or support
- * this kind of feature?).
- */
-static void fec_set_multicast_list(struct net_device *dev)
-{
- struct fec_enet_private *fep = netdev_priv(dev);
- fec_t *fecp = fep->fecp;
- struct dev_mc_list *pmc;
- __u32 crc;
- int temp;
- __u32 csrVal;
- int hash_index;
- __u32 hthi, htlo;
- unsigned long flags;
-
-
- if ((dev->flags & IFF_PROMISC) != 0) {
-
- spin_lock_irqsave(&fep->lock, flags);
- FS(fecp, r_cntrl, FEC_RCNTRL_PROM);
- spin_unlock_irqrestore(&fep->lock, flags);
-
- /*
- * Log any net taps.
- */
- printk(KERN_WARNING DRV_MODULE_NAME
- ": %s: Promiscuous mode enabled.\n", dev->name);
- return;
-
- }
-
- if ((dev->flags & IFF_ALLMULTI) != 0 ||
- dev->mc_count > FEC_MAX_MULTICAST_ADDRS) {
- /*
- * Catch all multicast addresses, set the filter to all 1's.
- */
- hthi = 0xffffffffU;
- htlo = 0xffffffffU;
- } else {
- hthi = 0;
- htlo = 0;
-
- /*
- * Now populate the hash table
- */
- for (pmc = dev->mc_list; pmc != NULL; pmc = pmc->next) {
- crc = fec_mulicast_calc_crc(pmc->dmi_addr);
- temp = (crc & 0x3f) >> 1;
- hash_index = ((temp & 0x01) << 4) |
- ((temp & 0x02) << 2) |
- ((temp & 0x04)) |
- ((temp & 0x08) >> 2) |
- ((temp & 0x10) >> 4);
- csrVal = (1 << hash_index);
- if (crc & 1)
- hthi |= csrVal;
- else
- htlo |= csrVal;
- }
- }
-
- spin_lock_irqsave(&fep->lock, flags);
- FC(fecp, r_cntrl, FEC_RCNTRL_PROM);
- FW(fecp, hash_table_high, hthi);
- FW(fecp, hash_table_low, htlo);
- spin_unlock_irqrestore(&fep->lock, flags);
-}
-
-static int fec_set_mac_address(struct net_device *dev, void *addr)
-{
- struct sockaddr *mac = addr;
- struct fec_enet_private *fep = netdev_priv(dev);
- struct fec *fecp = fep->fecp;
- int i;
- __u32 addrhi, addrlo;
- unsigned long flags;
-
- /* Get pointer to SCC area in parameter RAM. */
- for (i = 0; i < 6; i++)
- dev->dev_addr[i] = mac->sa_data[i];
-
- /*
- * Set station address.
- */
- addrhi = ((__u32) dev->dev_addr[0] << 24) |
- ((__u32) dev->dev_addr[1] << 16) |
- ((__u32) dev->dev_addr[2] << 8) |
- (__u32) dev->dev_addr[3];
- addrlo = ((__u32) dev->dev_addr[4] << 24) |
- ((__u32) dev->dev_addr[5] << 16);
-
- spin_lock_irqsave(&fep->lock, flags);
- FW(fecp, addr_low, addrhi);
- FW(fecp, addr_high, addrlo);
- spin_unlock_irqrestore(&fep->lock, flags);
-
- return 0;
-}
-
-/*
- * This function is called to start or restart the FEC during a link
- * change. This only happens when switching between half and full
- * duplex.
- */
-void fec_restart(struct net_device *dev, int duplex, int speed)
-{
-#ifdef CONFIG_DUET
- immap_t *immap = (immap_t *) IMAP_ADDR;
- __u32 cptr;
-#endif
- struct fec_enet_private *fep = netdev_priv(dev);
- struct fec *fecp = fep->fecp;
- const struct fec_platform_info *fpi = fep->fpi;
- cbd_t *bdp;
- struct sk_buff *skb;
- int i;
- __u32 addrhi, addrlo;
-
- fec_whack_reset(fep->fecp);
-
- /*
- * Set station address.
- */
- addrhi = ((__u32) dev->dev_addr[0] << 24) |
- ((__u32) dev->dev_addr[1] << 16) |
- ((__u32) dev->dev_addr[2] << 8) |
- (__u32) dev->dev_addr[3];
- addrlo = ((__u32) dev->dev_addr[4] << 24) |
- ((__u32) dev->dev_addr[5] << 16);
- FW(fecp, addr_low, addrhi);
- FW(fecp, addr_high, addrlo);
-
- /*
- * Reset all multicast.
- */
- FW(fecp, hash_table_high, 0);
- FW(fecp, hash_table_low, 0);
-
- /*
- * Set maximum receive buffer size.
- */
- FW(fecp, r_buff_size, PKT_MAXBLR_SIZE);
- FW(fecp, r_hash, PKT_MAXBUF_SIZE);
-
- /*
- * Set receive and transmit descriptor base.
- */
- FW(fecp, r_des_start, iopa((__u32) (fep->rx_bd_base)));
- FW(fecp, x_des_start, iopa((__u32) (fep->tx_bd_base)));
-
- fep->dirty_tx = fep->cur_tx = fep->tx_bd_base;
- fep->tx_free = fep->tx_ring;
- fep->cur_rx = fep->rx_bd_base;
-
- /*
- * Reset SKB receive buffers
- */
- for (i = 0; i < fep->rx_ring; i++) {
- if ((skb = fep->rx_skbuff[i]) == NULL)
- continue;
- fep->rx_skbuff[i] = NULL;
- dev_kfree_skb(skb);
- }
-
- /*
- * Initialize the receive buffer descriptors.
- */
- for (i = 0, bdp = fep->rx_bd_base; i < fep->rx_ring; i++, bdp++) {
- skb = dev_alloc_skb(ENET_RX_FRSIZE);
- if (skb == NULL) {
- printk(KERN_WARNING DRV_MODULE_NAME
- ": %s Memory squeeze, unable to allocate skb\n",
- dev->name);
- fep->stats.rx_dropped++;
- break;
- }
- fep->rx_skbuff[i] = skb;
- skb->dev = dev;
- CBDW_BUFADDR(bdp, dma_map_single(NULL, skb->data,
- L1_CACHE_ALIGN(PKT_MAXBUF_SIZE),
- DMA_FROM_DEVICE));
- CBDW_DATLEN(bdp, 0); /* zero */
- CBDW_SC(bdp, BD_ENET_RX_EMPTY |
- ((i < fep->rx_ring - 1) ? 0 : BD_SC_WRAP));
- }
- /*
- * if we failed, fillup remainder
- */
- for (; i < fep->rx_ring; i++, bdp++) {
- fep->rx_skbuff[i] = NULL;
- CBDW_SC(bdp, (i < fep->rx_ring - 1) ? 0 : BD_SC_WRAP);
- }
-
- /*
- * Reset SKB transmit buffers.
- */
- for (i = 0; i < fep->tx_ring; i++) {
- if ((skb = fep->tx_skbuff[i]) == NULL)
- continue;
- fep->tx_skbuff[i] = NULL;
- dev_kfree_skb(skb);
- }
-
- /*
- * ...and the same for transmit.
- */
- for (i = 0, bdp = fep->tx_bd_base; i < fep->tx_ring; i++, bdp++) {
- fep->tx_skbuff[i] = NULL;
- CBDW_BUFADDR(bdp, virt_to_bus(NULL));
- CBDW_DATLEN(bdp, 0);
- CBDW_SC(bdp, (i < fep->tx_ring - 1) ? 0 : BD_SC_WRAP);
- }
-
- /*
- * Enable big endian and don't care about SDMA FC.
- */
- FW(fecp, fun_code, 0x78000000);
-
- /*
- * Set MII speed.
- */
- FW(fecp, mii_speed, fep->fec_phy_speed);
-
- /*
- * Clear any outstanding interrupt.
- */
- FW(fecp, ievent, 0xffc0);
- FW(fecp, ivec, (fpi->fec_irq / 2) << 29);
-
- /*
- * adjust to speed (only for DUET & RMII)
- */
-#ifdef CONFIG_DUET
- cptr = in_be32(&immap->im_cpm.cp_cptr);
- switch (fpi->fec_no) {
- case 0:
- /*
- * check if in RMII mode
- */
- if ((cptr & 0x100) == 0)
- break;
-
- if (speed == 10)
- cptr |= 0x0000010;
- else if (speed == 100)
- cptr &= ~0x0000010;
- break;
- case 1:
- /*
- * check if in RMII mode
- */
- if ((cptr & 0x80) == 0)
- break;
-
- if (speed == 10)
- cptr |= 0x0000008;
- else if (speed == 100)
- cptr &= ~0x0000008;
- break;
- default:
- break;
- }
- out_be32(&immap->im_cpm.cp_cptr, cptr);
-#endif
-
- FW(fecp, r_cntrl, FEC_RCNTRL_MII_MODE); /* MII enable */
- /*
- * adjust to duplex mode
- */
- if (duplex) {
- FC(fecp, r_cntrl, FEC_RCNTRL_DRT);
- FS(fecp, x_cntrl, FEC_TCNTRL_FDEN); /* FD enable */
- } else {
- FS(fecp, r_cntrl, FEC_RCNTRL_DRT);
- FC(fecp, x_cntrl, FEC_TCNTRL_FDEN); /* FD disable */
- }
-
- /*
- * Enable interrupts we wish to service.
- */
- FW(fecp, imask, FEC_ENET_TXF | FEC_ENET_TXB |
- FEC_ENET_RXF | FEC_ENET_RXB);
-
- /*
- * And last, enable the transmit and receive processing.
- */
- FW(fecp, ecntrl, FEC_ECNTRL_PINMUX | FEC_ECNTRL_ETHER_EN);
- FW(fecp, r_des_active, 0x01000000);
-}
-
-void fec_stop(struct net_device *dev)
-{
- struct fec_enet_private *fep = netdev_priv(dev);
- fec_t *fecp = fep->fecp;
- struct sk_buff *skb;
- int i;
-
- if ((FR(fecp, ecntrl) & FEC_ECNTRL_ETHER_EN) == 0)
- return; /* already down */
-
- FW(fecp, x_cntrl, 0x01); /* Graceful transmit stop */
- for (i = 0; ((FR(fecp, ievent) & 0x10000000) == 0) &&
- i < FEC_RESET_DELAY; i++)
- udelay(1);
-
- if (i == FEC_RESET_DELAY)
- printk(KERN_WARNING DRV_MODULE_NAME
- ": %s FEC timeout on graceful transmit stop\n",
- dev->name);
- /*
- * Disable FEC. Let only MII interrupts.
- */
- FW(fecp, imask, 0);
- FW(fecp, ecntrl, ~FEC_ECNTRL_ETHER_EN);
-
- /*
- * Reset SKB transmit buffers.
- */
- for (i = 0; i < fep->tx_ring; i++) {
- if ((skb = fep->tx_skbuff[i]) == NULL)
- continue;
- fep->tx_skbuff[i] = NULL;
- dev_kfree_skb(skb);
- }
-
- /*
- * Reset SKB receive buffers
- */
- for (i = 0; i < fep->rx_ring; i++) {
- if ((skb = fep->rx_skbuff[i]) == NULL)
- continue;
- fep->rx_skbuff[i] = NULL;
- dev_kfree_skb(skb);
- }
-}
-
-/* common receive function */
-static int fec_enet_rx_common(struct fec_enet_private *ep,
- struct net_device *dev, int budget)
-{
- fec_t *fecp = fep->fecp;
- const struct fec_platform_info *fpi = fep->fpi;
- cbd_t *bdp;
- struct sk_buff *skb, *skbn, *skbt;
- int received = 0;
- __u16 pkt_len, sc;
- int curidx;
-
- /*
- * First, grab all of the stats for the incoming packet.
- * These get messed up if we get called due to a busy condition.
- */
- bdp = fep->cur_rx;
-
- /* clear RX status bits for napi*/
- if (fpi->use_napi)
- FW(fecp, ievent, FEC_ENET_RXF | FEC_ENET_RXB);
-
- while (((sc = CBDR_SC(bdp)) & BD_ENET_RX_EMPTY) == 0) {
-
- curidx = bdp - fep->rx_bd_base;
-
- /*
- * Since we have allocated space to hold a complete frame,
- * the last indicator should be set.
- */
- if ((sc & BD_ENET_RX_LAST) == 0)
- printk(KERN_WARNING DRV_MODULE_NAME
- ": %s rcv is not +last\n",
- dev->name);
-
- /*
- * Check for errors.
- */
- if (sc & (BD_ENET_RX_LG | BD_ENET_RX_SH | BD_ENET_RX_CL |
- BD_ENET_RX_NO | BD_ENET_RX_CR | BD_ENET_RX_OV)) {
- fep->stats.rx_errors++;
- /* Frame too long or too short. */
- if (sc & (BD_ENET_RX_LG | BD_ENET_RX_SH))
- fep->stats.rx_length_errors++;
- /* Frame alignment */
- if (sc & (BD_ENET_RX_NO | BD_ENET_RX_CL))
- fep->stats.rx_frame_errors++;
- /* CRC Error */
- if (sc & BD_ENET_RX_CR)
- fep->stats.rx_crc_errors++;
- /* FIFO overrun */
- if (sc & BD_ENET_RX_OV)
- fep->stats.rx_crc_errors++;
-
- skbn = fep->rx_skbuff[curidx];
- BUG_ON(skbn == NULL);
-
- } else {
- skb = fep->rx_skbuff[curidx];
- BUG_ON(skb == NULL);
-
- /*
- * Process the incoming frame.
- */
- fep->stats.rx_packets++;
- pkt_len = CBDR_DATLEN(bdp) - 4; /* remove CRC */
- fep->stats.rx_bytes += pkt_len + 4;
-
- if (pkt_len <= fpi->rx_copybreak) {
- /* +2 to make IP header L1 cache aligned */
- skbn = dev_alloc_skb(pkt_len + 2);
- if (skbn != NULL) {
- skb_reserve(skbn, 2); /* align IP header */
- skb_copy_from_linear_data(skb,
- skbn->data,
- pkt_len);
- /* swap */
- skbt = skb;
- skb = skbn;
- skbn = skbt;
- }
- } else
- skbn = dev_alloc_skb(ENET_RX_FRSIZE);
-
- if (skbn != NULL) {
- skb_put(skb, pkt_len); /* Make room */
- skb->protocol = eth_type_trans(skb, dev);
- received++;
- if (!fpi->use_napi)
- netif_rx(skb);
- else
- netif_receive_skb(skb);
- } else {
- printk(KERN_WARNING DRV_MODULE_NAME
- ": %s Memory squeeze, dropping packet.\n",
- dev->name);
- fep->stats.rx_dropped++;
- skbn = skb;
- }
- }
-
- fep->rx_skbuff[curidx] = skbn;
- CBDW_BUFADDR(bdp, dma_map_single(NULL, skbn->data,
- L1_CACHE_ALIGN(PKT_MAXBUF_SIZE),
- DMA_FROM_DEVICE));
- CBDW_DATLEN(bdp, 0);
- CBDW_SC(bdp, (sc & ~BD_ENET_RX_STATS) | BD_ENET_RX_EMPTY);
-
- /*
- * Update BD pointer to next entry.
- */
- if ((sc & BD_ENET_RX_WRAP) == 0)
- bdp++;
- else
- bdp = fep->rx_bd_base;
-
- /*
- * Doing this here will keep the FEC running while we process
- * incoming frames. On a heavily loaded network, we should be
- * able to keep up at the expense of system resources.
- */
- FW(fecp, r_des_active, 0x01000000);
-
- if (received >= budget)
- break;
-
- }
-
- fep->cur_rx = bdp;
-
- if (fpi->use_napi) {
- if (received < budget) {
- netif_rx_complete(dev, &fep->napi);
-
- /* enable RX interrupt bits */
- FS(fecp, imask, FEC_ENET_RXF | FEC_ENET_RXB);
- }
- }
-
- return received;
-}
-
-static void fec_enet_tx(struct net_device *dev)
-{
- struct fec_enet_private *fep = netdev_priv(dev);
- cbd_t *bdp;
- struct sk_buff *skb;
- int dirtyidx, do_wake;
- __u16 sc;
-
- spin_lock(&fep->lock);
- bdp = fep->dirty_tx;
-
- do_wake = 0;
- while (((sc = CBDR_SC(bdp)) & BD_ENET_TX_READY) == 0) {
-
- dirtyidx = bdp - fep->tx_bd_base;
-
- if (fep->tx_free == fep->tx_ring)
- break;
-
- skb = fep->tx_skbuff[dirtyidx];
-
- /*
- * Check for errors.
- */
- if (sc & (BD_ENET_TX_HB | BD_ENET_TX_LC |
- BD_ENET_TX_RL | BD_ENET_TX_UN | BD_ENET_TX_CSL)) {
- fep->stats.tx_errors++;
- if (sc & BD_ENET_TX_HB) /* No heartbeat */
- fep->stats.tx_heartbeat_errors++;
- if (sc & BD_ENET_TX_LC) /* Late collision */
- fep->stats.tx_window_errors++;
- if (sc & BD_ENET_TX_RL) /* Retrans limit */
- fep->stats.tx_aborted_errors++;
- if (sc & BD_ENET_TX_UN) /* Underrun */
- fep->stats.tx_fifo_errors++;
- if (sc & BD_ENET_TX_CSL) /* Carrier lost */
- fep->stats.tx_carrier_errors++;
- } else
- fep->stats.tx_packets++;
-
- if (sc & BD_ENET_TX_READY)
- printk(KERN_WARNING DRV_MODULE_NAME
- ": %s HEY! Enet xmit interrupt and TX_READY.\n",
- dev->name);
-
- /*
- * Deferred means some collisions occurred during transmit,
- * but we eventually sent the packet OK.
- */
- if (sc & BD_ENET_TX_DEF)
- fep->stats.collisions++;
-
- /*
- * Free the sk buffer associated with this last transmit.
- */
- dev_kfree_skb_irq(skb);
- fep->tx_skbuff[dirtyidx] = NULL;
-
- /*
- * Update pointer to next buffer descriptor to be transmitted.
- */
- if ((sc & BD_ENET_TX_WRAP) == 0)
- bdp++;
- else
- bdp = fep->tx_bd_base;
-
- /*
- * Since we have freed up a buffer, the ring is no longer
- * full.
- */
- if (!fep->tx_free++)
- do_wake = 1;
- }
-
- fep->dirty_tx = bdp;
-
- spin_unlock(&fep->lock);
-
- if (do_wake && netif_queue_stopped(dev))
- netif_wake_queue(dev);
-}
-
-/*
- * The interrupt handler.
- * This is called from the MPC core interrupt.
- */
-static irqreturn_t
-fec_enet_interrupt(int irq, void *dev_id)
-{
- struct net_device *dev = dev_id;
- struct fec_enet_private *fep;
- const struct fec_platform_info *fpi;
- fec_t *fecp;
- __u32 int_events;
- __u32 int_events_napi;
-
- if (unlikely(dev == NULL))
- return IRQ_NONE;
-
- fep = netdev_priv(dev);
- fecp = fep->fecp;
- fpi = fep->fpi;
-
- /*
- * Get the interrupt events that caused us to be here.
- */
- while ((int_events = FR(fecp, ievent) & FR(fecp, imask)) != 0) {
-
- if (!fpi->use_napi)
- FW(fecp, ievent, int_events);
- else {
- int_events_napi = int_events & ~(FEC_ENET_RXF | FEC_ENET_RXB);
- FW(fecp, ievent, int_events_napi);
- }
-
- if ((int_events & (FEC_ENET_HBERR | FEC_ENET_BABR |
- FEC_ENET_BABT | FEC_ENET_EBERR)) != 0)
- printk(KERN_WARNING DRV_MODULE_NAME
- ": %s FEC ERROR(s) 0x%x\n",
- dev->name, int_events);
-
- if ((int_events & FEC_ENET_RXF) != 0) {
- if (!fpi->use_napi)
- fec_enet_rx_common(fep, dev, ~0);
- else {
- if (netif_rx_schedule_prep(dev, &fep->napi)) {
- /* disable rx interrupts */
- FC(fecp, imask, FEC_ENET_RXF | FEC_ENET_RXB);
- __netif_rx_schedule(dev, &fep->napi);
- } else {
- printk(KERN_ERR DRV_MODULE_NAME
- ": %s driver bug! interrupt while in poll!\n",
- dev->name);
- FC(fecp, imask, FEC_ENET_RXF | FEC_ENET_RXB);
- }
- }
- }
-
- if ((int_events & FEC_ENET_TXF) != 0)
- fec_enet_tx(dev);
- }
-
- return IRQ_HANDLED;
-}
-
-/* This interrupt occurs when the PHY detects a link change. */
-static irqreturn_t
-fec_mii_link_interrupt(int irq, void *dev_id)
-{
- struct net_device *dev = dev_id;
- struct fec_enet_private *fep;
- const struct fec_platform_info *fpi;
-
- if (unlikely(dev == NULL))
- return IRQ_NONE;
-
- fep = netdev_priv(dev);
- fpi = fep->fpi;
-
- if (!fpi->use_mdio)
- return IRQ_NONE;
-
- /*
- * Acknowledge the interrupt if possible. If we have not
- * found the PHY yet we can't process or acknowledge the
- * interrupt now. Instead we ignore this interrupt for now,
- * which we can do since it is edge triggered. It will be
- * acknowledged later by fec_enet_open().
- */
- if (!fep->phy)
- return IRQ_NONE;
-
- fec_mii_ack_int(dev);
- fec_mii_link_status_change_check(dev, 0);
-
- return IRQ_HANDLED;
-}
-
-
-/**********************************************************************************/
-
-static int fec_enet_start_xmit(struct sk_buff *skb, struct net_device *dev)
-{
- struct fec_enet_private *fep = netdev_priv(dev);
- fec_t *fecp = fep->fecp;
- cbd_t *bdp;
- int curidx;
- unsigned long flags;
-
- spin_lock_irqsave(&fep->tx_lock, flags);
-
- /*
- * Fill in a Tx ring entry
- */
- bdp = fep->cur_tx;
-
- if (!fep->tx_free || (CBDR_SC(bdp) & BD_ENET_TX_READY)) {
- netif_stop_queue(dev);
- spin_unlock_irqrestore(&fep->tx_lock, flags);
-
- /*
- * Ooops. All transmit buffers are full. Bail out.
- * This should not happen, since the tx queue should be stopped.
- */
- printk(KERN_WARNING DRV_MODULE_NAME
- ": %s tx queue full!.\n", dev->name);
- return 1;
- }
-
- curidx = bdp - fep->tx_bd_base;
- /*
- * Clear all of the status flags.
- */
- CBDC_SC(bdp, BD_ENET_TX_STATS);
-
- /*
- * Save skb pointer.
- */
- fep->tx_skbuff[curidx] = skb;
-
- fep->stats.tx_bytes += skb->len;
-
- /*
- * Push the data cache so the CPM does not get stale memory data.
- */
- CBDW_BUFADDR(bdp, dma_map_single(NULL, skb->data,
- skb->len, DMA_TO_DEVICE));
- CBDW_DATLEN(bdp, skb->len);
-
- dev->trans_start = jiffies;
-
- /*
- * If this was the last BD in the ring, start at the beginning again.
- */
- if ((CBDR_SC(bdp) & BD_ENET_TX_WRAP) == 0)
- fep->cur_tx++;
- else
- fep->cur_tx = fep->tx_bd_base;
-
- if (!--fep->tx_free)
- netif_stop_queue(dev);
-
- /*
- * Trigger transmission start
- */
- CBDS_SC(bdp, BD_ENET_TX_READY | BD_ENET_TX_INTR |
- BD_ENET_TX_LAST | BD_ENET_TX_TC);
- FW(fecp, x_des_active, 0x01000000);
-
- spin_unlock_irqrestore(&fep->tx_lock, flags);
-
- return 0;
-}
-
-static void fec_timeout(struct net_device *dev)
-{
- struct fec_enet_private *fep = netdev_priv(dev);
-
- fep->stats.tx_errors++;
-
- if (fep->tx_free)
- netif_wake_queue(dev);
-
- /* check link status again */
- fec_mii_link_status_change_check(dev, 0);
-}
-
-static int fec_enet_open(struct net_device *dev)
-{
- struct fec_enet_private *fep = netdev_priv(dev);
- const struct fec_platform_info *fpi = fep->fpi;
- unsigned long flags;
-
- napi_enable(&fep->napi);
-
- /* Install our interrupt handler. */
- if (request_irq(fpi->fec_irq, fec_enet_interrupt, 0, "fec", dev) != 0) {
- printk(KERN_ERR DRV_MODULE_NAME
- ": %s Could not allocate FEC IRQ!", dev->name);
- napi_disable(&fep->napi);
- return -EINVAL;
- }
-
- /* Install our phy interrupt handler */
- if (fpi->phy_irq != -1 &&
- request_irq(fpi->phy_irq, fec_mii_link_interrupt, 0, "fec-phy",
- dev) != 0) {
- printk(KERN_ERR DRV_MODULE_NAME
- ": %s Could not allocate PHY IRQ!", dev->name);
- free_irq(fpi->fec_irq, dev);
- napi_disable(&fep->napi);
- return -EINVAL;
- }
-
- if (fpi->use_mdio) {
- fec_mii_startup(dev);
- netif_carrier_off(dev);
- fec_mii_link_status_change_check(dev, 1);
- } else {
- spin_lock_irqsave(&fep->lock, flags);
- fec_restart(dev, 1, 100); /* XXX this sucks */
- spin_unlock_irqrestore(&fep->lock, flags);
-
- netif_carrier_on(dev);
- netif_start_queue(dev);
- }
- return 0;
-}
-
-static int fec_enet_close(struct net_device *dev)
-{
- struct fec_enet_private *fep = netdev_priv(dev);
- const struct fec_platform_info *fpi = fep->fpi;
- unsigned long flags;
-
- netif_stop_queue(dev);
- napi_disable(&fep->napi);
- netif_carrier_off(dev);
-
- if (fpi->use_mdio)
- fec_mii_shutdown(dev);
-
- spin_lock_irqsave(&fep->lock, flags);
- fec_stop(dev);
- spin_unlock_irqrestore(&fep->lock, flags);
-
- /* release any irqs */
- if (fpi->phy_irq != -1)
- free_irq(fpi->phy_irq, dev);
- free_irq(fpi->fec_irq, dev);
-
- return 0;
-}
-
-static struct net_device_stats *fec_enet_get_stats(struct net_device *dev)
-{
- struct fec_enet_private *fep = netdev_priv(dev);
- return &fep->stats;
-}
-
-static int fec_enet_poll(struct napi_struct *napi, int budget)
-{
- struct fec_enet_private *fep = container_of(napi, struct fec_enet_private, napi);
- struct net_device *dev = fep->dev;
-
- return fec_enet_rx_common(fep, dev, budget);
-}
-
-/*************************************************************************/
-
-static void fec_get_drvinfo(struct net_device *dev,
- struct ethtool_drvinfo *info)
-{
- strcpy(info->driver, DRV_MODULE_NAME);
- strcpy(info->version, DRV_MODULE_VERSION);
-}
-
-static int fec_get_regs_len(struct net_device *dev)
-{
- return sizeof(fec_t);
-}
-
-static void fec_get_regs(struct net_device *dev, struct ethtool_regs *regs,
- void *p)
-{
- struct fec_enet_private *fep = netdev_priv(dev);
- unsigned long flags;
-
- if (regs->len < sizeof(fec_t))
- return;
-
- regs->version = 0;
- spin_lock_irqsave(&fep->lock, flags);
- memcpy_fromio(p, fep->fecp, sizeof(fec_t));
- spin_unlock_irqrestore(&fep->lock, flags);
-}
-
-static int fec_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
-{
- struct fec_enet_private *fep = netdev_priv(dev);
- unsigned long flags;
- int rc;
-
- spin_lock_irqsave(&fep->lock, flags);
- rc = mii_ethtool_gset(&fep->mii_if, cmd);
- spin_unlock_irqrestore(&fep->lock, flags);
-
- return rc;
-}
-
-static int fec_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
-{
- struct fec_enet_private *fep = netdev_priv(dev);
- unsigned long flags;
- int rc;
-
- spin_lock_irqsave(&fep->lock, flags);
- rc = mii_ethtool_sset(&fep->mii_if, cmd);
- spin_unlock_irqrestore(&fep->lock, flags);
-
- return rc;
-}
-
-static int fec_nway_reset(struct net_device *dev)
-{
- struct fec_enet_private *fep = netdev_priv(dev);
- return mii_nway_restart(&fep->mii_if);
-}
-
-static __u32 fec_get_msglevel(struct net_device *dev)
-{
- struct fec_enet_private *fep = netdev_priv(dev);
- return fep->msg_enable;
-}
-
-static void fec_set_msglevel(struct net_device *dev, __u32 value)
-{
- struct fec_enet_private *fep = netdev_priv(dev);
- fep->msg_enable = value;
-}
-
-static const struct ethtool_ops fec_ethtool_ops = {
- .get_drvinfo = fec_get_drvinfo,
- .get_regs_len = fec_get_regs_len,
- .get_settings = fec_get_settings,
- .set_settings = fec_set_settings,
- .nway_reset = fec_nway_reset,
- .get_link = ethtool_op_get_link,
- .get_msglevel = fec_get_msglevel,
- .set_msglevel = fec_set_msglevel,
- .set_tx_csum = ethtool_op_set_tx_csum, /* local! */
- .set_sg = ethtool_op_set_sg,
- .get_regs = fec_get_regs,
-};
-
-static int fec_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
-{
- struct fec_enet_private *fep = netdev_priv(dev);
- struct mii_ioctl_data *mii = (struct mii_ioctl_data *)&rq->ifr_data;
- unsigned long flags;
- int rc;
-
- if (!netif_running(dev))
- return -EINVAL;
-
- spin_lock_irqsave(&fep->lock, flags);
- rc = generic_mii_ioctl(&fep->mii_if, mii, cmd, NULL);
- spin_unlock_irqrestore(&fep->lock, flags);
- return rc;
-}
-
-int fec_8xx_init_one(const struct fec_platform_info *fpi,
- struct net_device **devp)
-{
- immap_t *immap = (immap_t *) IMAP_ADDR;
- static int fec_8xx_version_printed = 0;
- struct net_device *dev = NULL;
- struct fec_enet_private *fep = NULL;
- fec_t *fecp = NULL;
- int i;
- int err = 0;
- int registered = 0;
- __u32 siel;
-
- *devp = NULL;
-
- switch (fpi->fec_no) {
- case 0:
- fecp = &((immap_t *) IMAP_ADDR)->im_cpm.cp_fec;
- break;
-#ifdef CONFIG_DUET
- case 1:
- fecp = &((immap_t *) IMAP_ADDR)->im_cpm.cp_fec2;
- break;
-#endif
- default:
- return -EINVAL;
- }
-
- if (fec_8xx_version_printed++ == 0)
- printk(KERN_INFO "%s", version);
-
- i = sizeof(*fep) + (sizeof(struct sk_buff **) *
- (fpi->rx_ring + fpi->tx_ring));
-
- dev = alloc_etherdev(i);
- if (!dev) {
- err = -ENOMEM;
- goto err;
- }
-
- fep = netdev_priv(dev);
- fep->dev = dev;
-
- /* partial reset of FEC */
- fec_whack_reset(fecp);
-
- /* point rx_skbuff, tx_skbuff */
- fep->rx_skbuff = (struct sk_buff **)&fep[1];
- fep->tx_skbuff = fep->rx_skbuff + fpi->rx_ring;
-
- fep->fecp = fecp;
- fep->fpi = fpi;
-
- /* init locks */
- spin_lock_init(&fep->lock);
- spin_lock_init(&fep->tx_lock);
-
- /*
- * Set the Ethernet address.
- */
- for (i = 0; i < 6; i++)
- dev->dev_addr[i] = fpi->macaddr[i];
-
- fep->ring_base = dma_alloc_coherent(NULL,
- (fpi->tx_ring + fpi->rx_ring) *
- sizeof(cbd_t), &fep->ring_mem_addr,
- GFP_KERNEL);
- if (fep->ring_base == NULL) {
- printk(KERN_ERR DRV_MODULE_NAME
- ": %s dma alloc failed.\n", dev->name);
- err = -ENOMEM;
- goto err;
- }
-
- /*
- * Set receive and transmit descriptor base.
- */
- fep->rx_bd_base = fep->ring_base;
- fep->tx_bd_base = fep->rx_bd_base + fpi->rx_ring;
-
- /* initialize ring size variables */
- fep->tx_ring = fpi->tx_ring;
- fep->rx_ring = fpi->rx_ring;
-
- /* SIU interrupt */
- if (fpi->phy_irq != -1 &&
- (fpi->phy_irq >= SIU_IRQ0 && fpi->phy_irq < SIU_LEVEL7)) {
-
- siel = in_be32(&immap->im_siu_conf.sc_siel);
- if ((fpi->phy_irq & 1) == 0)
- siel |= (0x80000000 >> fpi->phy_irq);
- else
- siel &= ~(0x80000000 >> (fpi->phy_irq & ~1));
- out_be32(&immap->im_siu_conf.sc_siel, siel);
- }
-
- /*
- * The FEC Ethernet specific entries in the device structure.
- */
- dev->open = fec_enet_open;
- dev->hard_start_xmit = fec_enet_start_xmit;
- dev->tx_timeout = fec_timeout;
- dev->watchdog_timeo = TX_TIMEOUT;
- dev->stop = fec_enet_close;
- dev->get_stats = fec_enet_get_stats;
- dev->set_multicast_list = fec_set_multicast_list;
- dev->set_mac_address = fec_set_mac_address;
- netif_napi_add(dev, &fec->napi,
- fec_enet_poll, fpi->napi_weight);
-
- dev->ethtool_ops = &fec_ethtool_ops;
- dev->do_ioctl = fec_ioctl;
-
- fep->fec_phy_speed =
- ((((fpi->sys_clk + 4999999) / 2500000) / 2) & 0x3F) << 1;
-
- init_timer(&fep->phy_timer_list);
-
- /* partial reset of FEC so that only MII works */
- FW(fecp, mii_speed, fep->fec_phy_speed);
- FW(fecp, ievent, 0xffc0);
- FW(fecp, ivec, (fpi->fec_irq / 2) << 29);
- FW(fecp, imask, 0);
- FW(fecp, r_cntrl, FEC_RCNTRL_MII_MODE); /* MII enable */
- FW(fecp, ecntrl, FEC_ECNTRL_PINMUX | FEC_ECNTRL_ETHER_EN);
-
- netif_carrier_off(dev);
-
- err = register_netdev(dev);
- if (err != 0)
- goto err;
- registered = 1;
-
- if (fpi->use_mdio) {
- fep->mii_if.dev = dev;
- fep->mii_if.mdio_read = fec_mii_read;
- fep->mii_if.mdio_write = fec_mii_write;
- fep->mii_if.phy_id_mask = 0x1f;
- fep->mii_if.reg_num_mask = 0x1f;
- fep->mii_if.phy_id = fec_mii_phy_id_detect(dev);
- }
-
- *devp = dev;
-
- return 0;
-
- err:
- if (dev != NULL) {
- if (fecp != NULL)
- fec_whack_reset(fecp);
-
- if (registered)
- unregister_netdev(dev);
-
- if (fep != NULL) {
- if (fep->ring_base)
- dma_free_coherent(NULL,
- (fpi->tx_ring +
- fpi->rx_ring) *
- sizeof(cbd_t), fep->ring_base,
- fep->ring_mem_addr);
- }
- free_netdev(dev);
- }
- return err;
-}
-
-int fec_8xx_cleanup_one(struct net_device *dev)
-{
- struct fec_enet_private *fep = netdev_priv(dev);
- fec_t *fecp = fep->fecp;
- const struct fec_platform_info *fpi = fep->fpi;
-
- fec_whack_reset(fecp);
-
- unregister_netdev(dev);
-
- dma_free_coherent(NULL, (fpi->tx_ring + fpi->rx_ring) * sizeof(cbd_t),
- fep->ring_base, fep->ring_mem_addr);
-
- free_netdev(dev);
-
- return 0;
-}
-
-/**************************************************************************************/
-/**************************************************************************************/
-/**************************************************************************************/
-
-static int __init fec_8xx_init(void)
-{
- return fec_8xx_platform_init();
-}
-
-static void __exit fec_8xx_cleanup(void)
-{
- fec_8xx_platform_cleanup();
-}
-
-/**************************************************************************************/
-/**************************************************************************************/
-/**************************************************************************************/
-
-module_init(fec_8xx_init);
-module_exit(fec_8xx_cleanup);
+++ /dev/null
-/*
- * Fast Ethernet Controller (FEC) driver for Motorola MPC8xx.
- *
- * Copyright (c) 2003 Intracom S.A.
- * by Pantelis Antoniou <panto@intracom.gr>
- *
- * Heavily based on original FEC driver by Dan Malek <dan@embeddededge.com>
- * and modifications by Joakim Tjernlund <joakim.tjernlund@lumentis.se>
- *
- * Released under the GPL
- */
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/ptrace.h>
-#include <linux/errno.h>
-#include <linux/ioport.h>
-#include <linux/slab.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/skbuff.h>
-#include <linux/spinlock.h>
-#include <linux/mii.h>
-#include <linux/ethtool.h>
-#include <linux/bitops.h>
-
-#include <asm/8xx_immap.h>
-#include <asm/pgtable.h>
-#include <asm/mpc8xx.h>
-#include <asm/irq.h>
-#include <asm/uaccess.h>
-#include <asm/cpm1.h>
-
-/*************************************************/
-
-#include "fec_8xx.h"
-
-/*************************************************/
-
-/* Make MII read/write commands for the FEC.
-*/
-#define mk_mii_read(REG) (0x60020000 | ((REG & 0x1f) << 18))
-#define mk_mii_write(REG, VAL) (0x50020000 | ((REG & 0x1f) << 18) | (VAL & 0xffff))
-#define mk_mii_end 0
-
-/*************************************************/
-
-/* XXX both FECs use the MII interface of FEC1 */
-static DEFINE_SPINLOCK(fec_mii_lock);
-
-#define FEC_MII_LOOPS 10000
-
-int fec_mii_read(struct net_device *dev, int phy_id, int location)
-{
- struct fec_enet_private *fep = netdev_priv(dev);
- fec_t *fecp;
- int i, ret = -1;
- unsigned long flags;
-
- /* XXX MII interface is only connected to FEC1 */
- fecp = &((immap_t *) IMAP_ADDR)->im_cpm.cp_fec;
-
- spin_lock_irqsave(&fec_mii_lock, flags);
-
- if ((FR(fecp, r_cntrl) & FEC_RCNTRL_MII_MODE) == 0) {
- FS(fecp, r_cntrl, FEC_RCNTRL_MII_MODE); /* MII enable */
- FS(fecp, ecntrl, FEC_ECNTRL_PINMUX | FEC_ECNTRL_ETHER_EN);
- FW(fecp, ievent, FEC_ENET_MII);
- }
-
- /* Add PHY address to register command. */
- FW(fecp, mii_speed, fep->fec_phy_speed);
- FW(fecp, mii_data, (phy_id << 23) | mk_mii_read(location));
-
- for (i = 0; i < FEC_MII_LOOPS; i++)
- if ((FR(fecp, ievent) & FEC_ENET_MII) != 0)
- break;
-
- if (i < FEC_MII_LOOPS) {
- FW(fecp, ievent, FEC_ENET_MII);
- ret = FR(fecp, mii_data) & 0xffff;
- }
-
- spin_unlock_irqrestore(&fec_mii_lock, flags);
-
- return ret;
-}
-
-void fec_mii_write(struct net_device *dev, int phy_id, int location, int value)
-{
- struct fec_enet_private *fep = netdev_priv(dev);
- fec_t *fecp;
- unsigned long flags;
- int i;
-
- /* XXX MII interface is only connected to FEC1 */
- fecp = &((immap_t *) IMAP_ADDR)->im_cpm.cp_fec;
-
- spin_lock_irqsave(&fec_mii_lock, flags);
-
- if ((FR(fecp, r_cntrl) & FEC_RCNTRL_MII_MODE) == 0) {
- FS(fecp, r_cntrl, FEC_RCNTRL_MII_MODE); /* MII enable */
- FS(fecp, ecntrl, FEC_ECNTRL_PINMUX | FEC_ECNTRL_ETHER_EN);
- FW(fecp, ievent, FEC_ENET_MII);
- }
-
- /* Add PHY address to register command. */
- FW(fecp, mii_speed, fep->fec_phy_speed); /* always adapt mii speed */
- FW(fecp, mii_data, (phy_id << 23) | mk_mii_write(location, value));
-
- for (i = 0; i < FEC_MII_LOOPS; i++)
- if ((FR(fecp, ievent) & FEC_ENET_MII) != 0)
- break;
-
- if (i < FEC_MII_LOOPS)
- FW(fecp, ievent, FEC_ENET_MII);
-
- spin_unlock_irqrestore(&fec_mii_lock, flags);
-}
-
-/*************************************************/
-
-#ifdef CONFIG_FEC_8XX_GENERIC_PHY
-
-/*
- * Generic PHY support.
- * Should work for all PHYs, but link change is detected by polling
- */
-
-static void generic_timer_callback(unsigned long data)
-{
- struct net_device *dev = (struct net_device *)data;
- struct fec_enet_private *fep = netdev_priv(dev);
-
- fep->phy_timer_list.expires = jiffies + HZ / 2;
-
- add_timer(&fep->phy_timer_list);
-
- fec_mii_link_status_change_check(dev, 0);
-}
-
-static void generic_startup(struct net_device *dev)
-{
- struct fec_enet_private *fep = netdev_priv(dev);
-
- fep->phy_timer_list.expires = jiffies + HZ / 2; /* every 500ms */
- fep->phy_timer_list.data = (unsigned long)dev;
- fep->phy_timer_list.function = generic_timer_callback;
- add_timer(&fep->phy_timer_list);
-}
-
-static void generic_shutdown(struct net_device *dev)
-{
- struct fec_enet_private *fep = netdev_priv(dev);
-
- del_timer_sync(&fep->phy_timer_list);
-}
-
-#endif
-
-#ifdef CONFIG_FEC_8XX_DM9161_PHY
-
-/* ------------------------------------------------------------------------- */
-/* The Davicom DM9161 is used on the NETTA board */
-
-/* register definitions */
-
-#define MII_DM9161_ACR 16 /* Aux. Config Register */
-#define MII_DM9161_ACSR 17 /* Aux. Config/Status Register */
-#define MII_DM9161_10TCSR 18 /* 10BaseT Config/Status Reg. */
-#define MII_DM9161_INTR 21 /* Interrupt Register */
-#define MII_DM9161_RECR 22 /* Receive Error Counter Reg. */
-#define MII_DM9161_DISCR 23 /* Disconnect Counter Register */
-
-static void dm9161_startup(struct net_device *dev)
-{
- struct fec_enet_private *fep = netdev_priv(dev);
-
- fec_mii_write(dev, fep->mii_if.phy_id, MII_DM9161_INTR, 0x0000);
-}
-
-static void dm9161_ack_int(struct net_device *dev)
-{
- struct fec_enet_private *fep = netdev_priv(dev);
-
- fec_mii_read(dev, fep->mii_if.phy_id, MII_DM9161_INTR);
-}
-
-static void dm9161_shutdown(struct net_device *dev)
-{
- struct fec_enet_private *fep = netdev_priv(dev);
-
- fec_mii_write(dev, fep->mii_if.phy_id, MII_DM9161_INTR, 0x0f00);
-}
-
-#endif
-
-#ifdef CONFIG_FEC_8XX_LXT971_PHY
-
-/* Support for LXT971/972 PHY */
-
-#define MII_LXT971_PCR 16 /* Port Control Register */
-#define MII_LXT971_SR2 17 /* Status Register 2 */
-#define MII_LXT971_IER 18 /* Interrupt Enable Register */
-#define MII_LXT971_ISR 19 /* Interrupt Status Register */
-#define MII_LXT971_LCR 20 /* LED Control Register */
-#define MII_LXT971_TCR 30 /* Transmit Control Register */
-
-static void lxt971_startup(struct net_device *dev)
-{
- struct fec_enet_private *fep = netdev_priv(dev);
-
- fec_mii_write(dev, fep->mii_if.phy_id, MII_LXT971_IER, 0x00F2);
-}
-
-static void lxt971_ack_int(struct net_device *dev)
-{
- struct fec_enet_private *fep = netdev_priv(dev);
-
- fec_mii_read(dev, fep->mii_if.phy_id, MII_LXT971_ISR);
-}
-
-static void lxt971_shutdown(struct net_device *dev)
-{
- struct fec_enet_private *fep = netdev_priv(dev);
-
- fec_mii_write(dev, fep->mii_if.phy_id, MII_LXT971_IER, 0x0000);
-}
-#endif
-
-/**********************************************************************************/
-
-static const struct phy_info phy_info[] = {
-#ifdef CONFIG_FEC_8XX_DM9161_PHY
- {
- .id = 0x00181b88,
- .name = "DM9161",
- .startup = dm9161_startup,
- .ack_int = dm9161_ack_int,
- .shutdown = dm9161_shutdown,
- },
-#endif
-#ifdef CONFIG_FEC_8XX_LXT971_PHY
- {
- .id = 0x0001378e,
- .name = "LXT971/972",
- .startup = lxt971_startup,
- .ack_int = lxt971_ack_int,
- .shutdown = lxt971_shutdown,
- },
-#endif
-#ifdef CONFIG_FEC_8XX_GENERIC_PHY
- {
- .id = 0,
- .name = "GENERIC",
- .startup = generic_startup,
- .shutdown = generic_shutdown,
- },
-#endif
-};
-
-/**********************************************************************************/
-
-int fec_mii_phy_id_detect(struct net_device *dev)
-{
- struct fec_enet_private *fep = netdev_priv(dev);
- const struct fec_platform_info *fpi = fep->fpi;
- int i, r, start, end, phytype, physubtype;
- const struct phy_info *phy;
- int phy_hwid, phy_id;
-
- /* if no MDIO */
- if (fpi->use_mdio == 0)
- return -1;
-
- phy_hwid = -1;
- fep->phy = NULL;
-
- /* auto-detect? */
- if (fpi->phy_addr == -1) {
- start = 0;
- end = 32;
- } else { /* direct */
- start = fpi->phy_addr;
- end = start + 1;
- }
-
- for (phy_id = start; phy_id < end; phy_id++) {
- r = fec_mii_read(dev, phy_id, MII_PHYSID1);
- if (r == -1 || (phytype = (r & 0xffff)) == 0xffff)
- continue;
- r = fec_mii_read(dev, phy_id, MII_PHYSID2);
- if (r == -1 || (physubtype = (r & 0xffff)) == 0xffff)
- continue;
- phy_hwid = (phytype << 16) | physubtype;
- if (phy_hwid != -1)
- break;
- }
-
- if (phy_hwid == -1) {
- printk(KERN_ERR DRV_MODULE_NAME
- ": %s No PHY detected!\n", dev->name);
- return -1;
- }
-
- for (i = 0, phy = phy_info; i < ARRAY_SIZE(phy_info); i++, phy++)
- if (phy->id == (phy_hwid >> 4) || phy->id == 0)
- break;
-
- if (i >= ARRAY_SIZE(phy_info)) {
- printk(KERN_ERR DRV_MODULE_NAME
- ": %s PHY id 0x%08x is not supported!\n",
- dev->name, phy_hwid);
- return -1;
- }
-
- fep->phy = phy;
-
- printk(KERN_INFO DRV_MODULE_NAME
- ": %s Phy @ 0x%x, type %s (0x%08x)\n",
- dev->name, phy_id, fep->phy->name, phy_hwid);
-
- return phy_id;
-}
-
-void fec_mii_startup(struct net_device *dev)
-{
- struct fec_enet_private *fep = netdev_priv(dev);
- const struct fec_platform_info *fpi = fep->fpi;
-
- if (!fpi->use_mdio || fep->phy == NULL)
- return;
-
- if (fep->phy->startup == NULL)
- return;
-
- (*fep->phy->startup) (dev);
-}
-
-void fec_mii_shutdown(struct net_device *dev)
-{
- struct fec_enet_private *fep = netdev_priv(dev);
- const struct fec_platform_info *fpi = fep->fpi;
-
- if (!fpi->use_mdio || fep->phy == NULL)
- return;
-
- if (fep->phy->shutdown == NULL)
- return;
-
- (*fep->phy->shutdown) (dev);
-}
-
-void fec_mii_ack_int(struct net_device *dev)
-{
- struct fec_enet_private *fep = netdev_priv(dev);
- const struct fec_platform_info *fpi = fep->fpi;
-
- if (!fpi->use_mdio || fep->phy == NULL)
- return;
-
- if (fep->phy->ack_int == NULL)
- return;
-
- (*fep->phy->ack_int) (dev);
-}
-
-/* helper function */
-static int mii_negotiated(struct mii_if_info *mii)
-{
- int advert, lpa, val;
-
- if (!mii_link_ok(mii))
- return 0;
-
- val = (*mii->mdio_read) (mii->dev, mii->phy_id, MII_BMSR);
- if ((val & BMSR_ANEGCOMPLETE) == 0)
- return 0;
-
- advert = (*mii->mdio_read) (mii->dev, mii->phy_id, MII_ADVERTISE);
- lpa = (*mii->mdio_read) (mii->dev, mii->phy_id, MII_LPA);
-
- return mii_nway_result(advert & lpa);
-}
-
-void fec_mii_link_status_change_check(struct net_device *dev, int init_media)
-{
- struct fec_enet_private *fep = netdev_priv(dev);
- unsigned int media;
- unsigned long flags;
-
- if (mii_check_media(&fep->mii_if, netif_msg_link(fep), init_media) == 0)
- return;
-
- media = mii_negotiated(&fep->mii_if);
-
- if (netif_carrier_ok(dev)) {
- spin_lock_irqsave(&fep->lock, flags);
- fec_restart(dev, !!(media & ADVERTISE_FULL),
- (media & (ADVERTISE_100FULL | ADVERTISE_100HALF)) ?
- 100 : 10);
- spin_unlock_irqrestore(&fep->lock, flags);
-
- netif_start_queue(dev);
- } else {
- netif_stop_queue(dev);
-
- spin_lock_irqsave(&fep->lock, flags);
- fec_stop(dev);
- spin_unlock_irqrestore(&fep->lock, flags);
-
- }
-}
}
EXPORT_SYMBOL(of_dev_put);
-static ssize_t dev_show_devspec(struct device *dev,
+static ssize_t devspec_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct of_device *ofdev;
ofdev = to_of_device(dev);
- return sprintf(buf, "%s", ofdev->node->full_name);
+ return sprintf(buf, "%s\n", ofdev->node->full_name);
}
-static DEVICE_ATTR(devspec, S_IRUGO, dev_show_devspec, NULL);
+static ssize_t modalias_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct of_device *ofdev = to_of_device(dev);
+ ssize_t len = 0;
+
+ len = of_device_get_modalias(ofdev, buf, PAGE_SIZE - 2);
+ buf[len] = '\n';
+ buf[len+1] = 0;
+ return len+1;
+}
+
+struct device_attribute of_platform_device_attrs[] = {
+ __ATTR_RO(devspec),
+ __ATTR_RO(modalias),
+ __ATTR_NULL
+};
/**
* of_release_dev - free an of device structure when all users of it are finished.
int of_device_register(struct of_device *ofdev)
{
- int rc;
-
BUG_ON(ofdev->node == NULL);
-
- rc = device_register(&ofdev->dev);
- if (rc)
- return rc;
-
- rc = device_create_file(&ofdev->dev, &dev_attr_devspec);
- if (rc)
- device_unregister(&ofdev->dev);
-
- return rc;
+ return device_register(&ofdev->dev);
}
EXPORT_SYMBOL(of_device_register);
void of_device_unregister(struct of_device *ofdev)
{
- device_remove_file(&ofdev->dev, &dev_attr_devspec);
device_unregister(&ofdev->dev);
}
EXPORT_SYMBOL(of_device_unregister);
+
+ssize_t of_device_get_modalias(struct of_device *ofdev,
+ char *str, ssize_t len)
+{
+ const char *compat;
+ int cplen, i;
+ ssize_t tsize, csize, repend;
+
+ /* Name & Type */
+ csize = snprintf(str, len, "of:N%sT%s",
+ ofdev->node->name, ofdev->node->type);
+
+ /* Get compatible property if any */
+ compat = of_get_property(ofdev->node, "compatible", &cplen);
+ if (!compat)
+ return csize;
+
+ /* Find true end (we tolerate multiple \0 at the end */
+ for (i = (cplen - 1); i >= 0 && !compat[i]; i--)
+ cplen--;
+ if (!cplen)
+ return csize;
+ cplen++;
+
+ /* Check space (need cplen+1 chars including final \0) */
+ tsize = csize + cplen;
+ repend = tsize;
+
+ if (csize >= len) /* @ the limit, all is already filled */
+ return tsize;
+
+ if (tsize >= len) { /* limit compat list */
+ cplen = len - csize - 1;
+ repend = len;
+ }
+
+ /* Copy and do char replacement */
+ memcpy(&str[csize + 1], compat, cplen);
+ for (i = csize; i < repend; i++) {
+ char c = str[i];
+ if (c == '\0')
+ str[i] = 'C';
+ else if (c == ' ')
+ str[i] = '_';
+ }
+
+ return tsize;
+}
}
EXPORT_SYMBOL(of_gpio_simple_xlate);
-/* Should be sufficient for now, later we'll use dynamic bases. */
-#if defined(CONFIG_PPC32) || defined(CONFIG_SPARC32)
-#define GPIOS_PER_CHIP 32
-#else
-#define GPIOS_PER_CHIP 64
-#endif
-
-static int of_get_gpiochip_base(struct device_node *np)
-{
- struct device_node *gc = NULL;
- int gpiochip_base = 0;
-
- while ((gc = of_find_all_nodes(gc))) {
- if (!of_get_property(gc, "gpio-controller", NULL))
- continue;
-
- if (gc != np) {
- gpiochip_base += GPIOS_PER_CHIP;
- continue;
- }
-
- of_node_put(gc);
-
- if (gpiochip_base >= ARCH_NR_GPIOS)
- return -ENOSPC;
-
- return gpiochip_base;
- }
-
- return -ENOENT;
-}
-
/**
* of_mm_gpiochip_add - Add memory mapped GPIO chip (bank)
* @np: device node of the GPIO chip
if (!mm_gc->regs)
goto err1;
- gc->base = of_get_gpiochip_base(np);
- if (gc->base < 0) {
- ret = gc->base;
- goto err1;
- }
+ gc->base = -1;
if (!of_gc->xlate)
of_gc->xlate = of_gpio_simple_xlate;
#include <linux/of_device.h>
#include <linux/of_platform.h>
+extern struct device_attribute of_platform_device_attrs[];
+
static int of_platform_bus_match(struct device *dev, struct device_driver *drv)
{
struct of_device *of_dev = to_of_device(dev);
bus->suspend = of_platform_device_suspend;
bus->resume = of_platform_device_resume;
bus->shutdown = of_platform_device_shutdown;
+ bus->dev_attrs = of_platform_device_attrs;
return bus_register(bus);
}
--- /dev/null
+/*
+ * (c) Copyright 2006 Benjamin Herrenschmidt, IBM Corp.
+ * <benh@kernel.crashing.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef _ASM_POWERPC_DCR_GENERIC_H
+#define _ASM_POWERPC_DCR_GENERIC_H
+#ifdef __KERNEL__
+#ifndef __ASSEMBLY__
+
+enum host_type_t {DCR_HOST_MMIO, DCR_HOST_NATIVE, DCR_HOST_INVALID};
+
+typedef struct {
+ enum host_type_t type;
+ union {
+ dcr_host_mmio_t mmio;
+ dcr_host_native_t native;
+ } host;
+} dcr_host_t;
+
+extern bool dcr_map_ok_generic(dcr_host_t host);
+
+extern dcr_host_t dcr_map_generic(struct device_node *dev, unsigned int dcr_n,
+ unsigned int dcr_c);
+extern void dcr_unmap_generic(dcr_host_t host, unsigned int dcr_c);
+
+extern u32 dcr_read_generic(dcr_host_t host, unsigned int dcr_n);
+
+extern void dcr_write_generic(dcr_host_t host, unsigned int dcr_n, u32 value);
+
+#endif /* __ASSEMBLY__ */
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_DCR_GENERIC_H */
+
+
void __iomem *token;
unsigned int stride;
unsigned int base;
-} dcr_host_t;
+} dcr_host_mmio_t;
-#define DCR_MAP_OK(host) ((host).token != NULL)
+static inline bool dcr_map_ok_mmio(dcr_host_mmio_t host)
+{
+ return host.token != NULL;
+}
-extern dcr_host_t dcr_map(struct device_node *dev, unsigned int dcr_n,
- unsigned int dcr_c);
-extern void dcr_unmap(dcr_host_t host, unsigned int dcr_c);
+extern dcr_host_mmio_t dcr_map_mmio(struct device_node *dev,
+ unsigned int dcr_n,
+ unsigned int dcr_c);
+extern void dcr_unmap_mmio(dcr_host_mmio_t host, unsigned int dcr_c);
-static inline u32 dcr_read(dcr_host_t host, unsigned int dcr_n)
+static inline u32 dcr_read_mmio(dcr_host_mmio_t host, unsigned int dcr_n)
{
return in_be32(host.token + ((host.base + dcr_n) * host.stride));
}
-static inline void dcr_write(dcr_host_t host, unsigned int dcr_n, u32 value)
+static inline void dcr_write_mmio(dcr_host_mmio_t host,
+ unsigned int dcr_n,
+ u32 value)
{
out_be32(host.token + ((host.base + dcr_n) * host.stride), value);
}
typedef struct {
unsigned int base;
-} dcr_host_t;
+} dcr_host_native_t;
-#define DCR_MAP_OK(host) (1)
+static inline bool dcr_map_ok_native(dcr_host_native_t host)
+{
+ return 1;
+}
-#define dcr_map(dev, dcr_n, dcr_c) ((dcr_host_t){ .base = (dcr_n) })
-#define dcr_unmap(host, dcr_c) do {} while (0)
-#define dcr_read(host, dcr_n) mfdcr(dcr_n + host.base)
-#define dcr_write(host, dcr_n, value) mtdcr(dcr_n + host.base, value)
+#define dcr_map_native(dev, dcr_n, dcr_c) \
+ ((dcr_host_native_t){ .base = (dcr_n) })
+#define dcr_unmap_native(host, dcr_c) do {} while (0)
+#define dcr_read_native(host, dcr_n) mfdcr(dcr_n + host.base)
+#define dcr_write_native(host, dcr_n, value) mtdcr(dcr_n + host.base, value)
/* Device Control Registers */
void __mtdcr(int reg, unsigned int val);
#ifndef _ASM_POWERPC_DCR_H
#define _ASM_POWERPC_DCR_H
#ifdef __KERNEL__
+#ifndef __ASSEMBLY__
#ifdef CONFIG_PPC_DCR
#ifdef CONFIG_PPC_DCR_NATIVE
#include <asm/dcr-native.h>
-#else
+#endif
+
+#ifdef CONFIG_PPC_DCR_MMIO
#include <asm/dcr-mmio.h>
#endif
+
+/* Indirection layer for providing both NATIVE and MMIO support. */
+
+#if defined(CONFIG_PPC_DCR_NATIVE) && defined(CONFIG_PPC_DCR_MMIO)
+
+#include <asm/dcr-generic.h>
+
+#define DCR_MAP_OK(host) dcr_map_ok_generic(host)
+#define dcr_map(dev, dcr_n, dcr_c) dcr_map_generic(dev, dcr_n, dcr_c)
+#define dcr_unmap(host, dcr_c) dcr_unmap_generic(host, dcr_c)
+#define dcr_read(host, dcr_n) dcr_read_generic(host, dcr_n)
+#define dcr_write(host, dcr_n, value) dcr_write_generic(host, dcr_n, value)
+
+#else
+
+#ifdef CONFIG_PPC_DCR_NATIVE
+typedef dcr_host_native_t dcr_host_t;
+#define DCR_MAP_OK(host) dcr_map_ok_native(host)
+#define dcr_map(dev, dcr_n, dcr_c) dcr_map_native(dev, dcr_n, dcr_c)
+#define dcr_unmap(host, dcr_c) dcr_unmap_native(host, dcr_c)
+#define dcr_read(host, dcr_n) dcr_read_native(host, dcr_n)
+#define dcr_write(host, dcr_n, value) dcr_write_native(host, dcr_n, value)
+#else
+typedef dcr_host_mmio_t dcr_host_t;
+#define DCR_MAP_OK(host) dcr_map_ok_mmio(host)
+#define dcr_map(dev, dcr_n, dcr_c) dcr_map_mmio(dev, dcr_n, dcr_c)
+#define dcr_unmap(host, dcr_c) dcr_unmap_mmio(host, dcr_c)
+#define dcr_read(host, dcr_n) dcr_read_mmio(host, dcr_n)
+#define dcr_write(host, dcr_n, value) dcr_write_mmio(host, dcr_n, value)
+#endif
+
+#endif /* defined(CONFIG_PPC_DCR_NATIVE) && defined(CONFIG_PPC_DCR_MMIO) */
+
/*
* On CONFIG_PPC_MERGE, we have additional helpers to read the DCR
* base from the device-tree
#endif /* CONFIG_PPC_MERGE */
#endif /* CONFIG_PPC_DCR */
+#endif /* __ASSEMBLY__ */
#endif /* __KERNEL__ */
#endif /* _ASM_POWERPC_DCR_H */
#ifndef _ASM_POWERPC_IOCTL_H
#define _ASM_POWERPC_IOCTL_H
-
-/*
- * this was copied from the alpha as it's a bit cleaner there.
- * -- Cort
- */
-
-#define _IOC_NRBITS 8
-#define _IOC_TYPEBITS 8
#define _IOC_SIZEBITS 13
#define _IOC_DIRBITS 3
-#define _IOC_NRMASK ((1 << _IOC_NRBITS)-1)
-#define _IOC_TYPEMASK ((1 << _IOC_TYPEBITS)-1)
-#define _IOC_SIZEMASK ((1 << _IOC_SIZEBITS)-1)
-#define _IOC_DIRMASK ((1 << _IOC_DIRBITS)-1)
-
-#define _IOC_NRSHIFT 0
-#define _IOC_TYPESHIFT (_IOC_NRSHIFT+_IOC_NRBITS)
-#define _IOC_SIZESHIFT (_IOC_TYPESHIFT+_IOC_TYPEBITS)
-#define _IOC_DIRSHIFT (_IOC_SIZESHIFT+_IOC_SIZEBITS)
-
-/*
- * Direction bits _IOC_NONE could be 0, but OSF/1 gives it a bit.
- * And this turns out useful to catch old ioctl numbers in header
- * files for us.
- */
#define _IOC_NONE 1U
#define _IOC_READ 2U
#define _IOC_WRITE 4U
-#define _IOC(dir,type,nr,size) \
- (((dir) << _IOC_DIRSHIFT) | \
- ((type) << _IOC_TYPESHIFT) | \
- ((nr) << _IOC_NRSHIFT) | \
- ((size) << _IOC_SIZESHIFT))
-
-/* provoke compile error for invalid uses of size argument */
-extern unsigned int __invalid_size_argument_for_IOC;
-#define _IOC_TYPECHECK(t) \
- ((sizeof(t) == sizeof(t[1]) && \
- sizeof(t) < (1 << _IOC_SIZEBITS)) ? \
- sizeof(t) : __invalid_size_argument_for_IOC)
-
-/* used to create numbers */
-#define _IO(type,nr) _IOC(_IOC_NONE,(type),(nr),0)
-#define _IOR(type,nr,size) _IOC(_IOC_READ,(type),(nr),(_IOC_TYPECHECK(size)))
-#define _IOW(type,nr,size) _IOC(_IOC_WRITE,(type),(nr),(_IOC_TYPECHECK(size)))
-#define _IOWR(type,nr,size) _IOC(_IOC_READ|_IOC_WRITE,(type),(nr),(_IOC_TYPECHECK(size)))
-#define _IOR_BAD(type,nr,size) _IOC(_IOC_READ,(type),(nr),sizeof(size))
-#define _IOW_BAD(type,nr,size) _IOC(_IOC_WRITE,(type),(nr),sizeof(size))
-#define _IOWR_BAD(type,nr,size) _IOC(_IOC_READ|_IOC_WRITE,(type),(nr),sizeof(size))
-
-/* used to decode them.. */
-#define _IOC_DIR(nr) (((nr) >> _IOC_DIRSHIFT) & _IOC_DIRMASK)
-#define _IOC_TYPE(nr) (((nr) >> _IOC_TYPESHIFT) & _IOC_TYPEMASK)
-#define _IOC_NR(nr) (((nr) >> _IOC_NRSHIFT) & _IOC_NRMASK)
-#define _IOC_SIZE(nr) (((nr) >> _IOC_SIZESHIFT) & _IOC_SIZEMASK)
-
-/* various drivers, such as the pcmcia stuff, need these... */
-#define IOC_IN (_IOC_WRITE << _IOC_DIRSHIFT)
-#define IOC_OUT (_IOC_READ << _IOC_DIRSHIFT)
-#define IOC_INOUT ((_IOC_WRITE|_IOC_READ) << _IOC_DIRSHIFT)
-#define IOCSIZE_MASK (_IOC_SIZEMASK << _IOC_SIZESHIFT)
-#define IOCSIZE_SHIFT (_IOC_SIZESHIFT)
+#include <asm-generic/ioctl.h>
#endif /* _ASM_POWERPC_IOCTL_H */
#define __ARCH_HAS_DO_SOFTIRQ
+#if defined(CONFIG_BOOKE) || defined(CONFIG_40x)
+/*
+ * Per-cpu stacks for handling critical, debug and machine check
+ * level interrupts.
+ */
+extern struct thread_info *critirq_ctx[NR_CPUS];
+extern struct thread_info *dbgirq_ctx[NR_CPUS];
+extern struct thread_info *mcheckirq_ctx[NR_CPUS];
+extern void exc_lvl_ctx_init(void);
+#else
+#define exc_lvl_ctx_init()
+#endif
+
#ifdef CONFIG_IRQSTACKS
/*
* Per-cpu stacks for handling hard and soft interrupts.
extern int mmu_kernel_ssize;
extern int mmu_highuser_ssize;
extern u16 mmu_slb_size;
+extern unsigned long tce_alloc_start, tce_alloc_end;
/*
* If the processor supports 64k normal pages but not 64k cache
--- /dev/null
+#ifndef __ASM_POWERPC_MPC6xx_H
+#define __ASM_POWERPC_MPC6xx_H
+
+void mpc6xx_enter_standby(void);
+
+#endif
#define MPIC_ENABLE_MCK 0x00000200
/* Disable bias among target selection, spread interrupts evenly */
#define MPIC_NO_BIAS 0x00000400
+/* Ignore NIRQS as reported by FRR */
+#define MPIC_BROKEN_FRR_NIRQS 0x00000800
/* MPIC HW modification ID */
#define MPIC_REGSET_MASK 0xf0000000
const char *bus_id,
struct device *parent);
-extern ssize_t of_device_get_modalias(struct of_device *ofdev,
- char *str, ssize_t len);
extern int of_device_uevent(struct device *dev,
struct kobj_uevent_env *env);
#define toreal(rd)
#define fromreal(rd)
+/*
+ * We use addis to ensure compatibility with the "classic" ppc versions of
+ * these macros, which use rs = 0 to get the tophys offset in rd, rather than
+ * converting the address in r0, and so this version has to do that too
+ * (i.e. set register rd to 0 when rs == 0).
+ */
#define tophys(rd,rs) \
addis rd,rs,0
#ifndef __powerpc64__
#define IS_CRITICAL_EXC(regs) (((regs)->trap & 2) != 0)
#define IS_MCHECK_EXC(regs) (((regs)->trap & 4) != 0)
+#define IS_DEBUG_EXC(regs) (((regs)->trap & 8) != 0)
#endif /* ! __powerpc64__ */
#define TRAP(regs) ((regs)->trap & ~0xF)
#ifdef __powerpc64__
extern void smp_send_debugger_break(int cpu);
extern void smp_message_recv(int);
+DECLARE_PER_CPU(unsigned int, pvr);
+
#ifdef CONFIG_HOTPLUG_CPU
extern void fixup_irqs(cpumask_t map);
int generic_cpu_disable(void);
extern unsigned int rtas_data;
extern int mem_init_done; /* set on boot once kmalloc can be called */
+extern int init_bootmem_done; /* set on !NUMA once bootmem is available */
extern unsigned long memory_limit;
extern unsigned long klimit;
#define TIF_SECCOMP 10 /* secure computing */
#define TIF_RESTOREALL 11 /* Restore all regs (implies NOERROR) */
#define TIF_NOERROR 12 /* Force successful syscall return */
-#define TIF_RESTORE_SIGMASK 13 /* Restore signal mask in do_signal */
#define TIF_FREEZE 14 /* Freezing for suspend */
#define TIF_RUNLATCH 15 /* Is the runlatch enabled? */
#define TIF_ABI_PENDING 16 /* 32/64 bit switch needed */
#define _TIF_SECCOMP (1<<TIF_SECCOMP)
#define _TIF_RESTOREALL (1<<TIF_RESTOREALL)
#define _TIF_NOERROR (1<<TIF_NOERROR)
-#define _TIF_RESTORE_SIGMASK (1<<TIF_RESTORE_SIGMASK)
#define _TIF_FREEZE (1<<TIF_FREEZE)
#define _TIF_RUNLATCH (1<<TIF_RUNLATCH)
#define _TIF_ABI_PENDING (1<<TIF_ABI_PENDING)
#define _TIF_SYSCALL_T_OR_A (_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SECCOMP)
-#define _TIF_USER_WORK_MASK ( _TIF_SIGPENDING | \
- _TIF_NEED_RESCHED | _TIF_RESTORE_SIGMASK)
+#define _TIF_USER_WORK_MASK (_TIF_SIGPENDING | _TIF_NEED_RESCHED)
#define _TIF_PERSYSCALL_MASK (_TIF_RESTOREALL|_TIF_NOERROR)
/* Bits in local_flags */
/* Don't move TLF_NAPPING without adjusting the code in entry_32.S */
#define TLF_NAPPING 0 /* idle thread enabled NAP mode */
+#define TLF_SLEEPING 1 /* suspend code enabled SLEEP mode */
+#define TLF_RESTORE_SIGMASK 2 /* Restore signal mask in do_signal */
#define _TLF_NAPPING (1 << TLF_NAPPING)
+#define _TLF_SLEEPING (1 << TLF_SLEEPING)
+#define _TLF_RESTORE_SIGMASK (1 << TLF_RESTORE_SIGMASK)
+
+#ifndef __ASSEMBLY__
+#define HAVE_SET_RESTORE_SIGMASK 1
+static inline void set_restore_sigmask(void)
+{
+ struct thread_info *ti = current_thread_info();
+ ti->local_flags |= _TLF_RESTORE_SIGMASK;
+ set_bit(TIF_SIGPENDING, &ti->flags);
+}
+#endif /* !__ASSEMBLY__ */
#endif /* __KERNEL__ */
struct rtc_time;
extern void to_tm(int tim, struct rtc_time * tm);
+extern void GregorianDay(struct rtc_time *tm);
extern time_t last_rtc_update;
extern void generic_calibrate_decr(void);
#ifdef __KERNEL__
+#include <linux/irqreturn.h>
+
#ifdef CONFIG_XMON
extern void xmon_setup(void);
extern void xmon_register_spus(struct list_head *list);
+struct pt_regs;
+extern int xmon(struct pt_regs *excp);
+extern irqreturn_t xmon_irq(int, void *);
#else
static inline void xmon_setup(void) { };
static inline void xmon_register_spus(struct list_head *list) { };
#endif
+#if defined(CONFIG_XMON) && defined(CONFIG_SMP)
+extern int cpus_are_in_xmon(void);
+#endif
+
#endif /* __KERNEL __ */
#endif /* __ASM_POWERPC_XMON_H */
of_release_dev(&dev->dev);
}
+extern ssize_t of_device_get_modalias(struct of_device *ofdev,
+ char *str, ssize_t len);
+
#endif /* _LINUX_OF_DEVICE_H */
git://bbs.cooldavid.org / net-next-2.6.git / commitdiff