]> bbs.cooldavid.org Git - net-next-2.6.git/commitdiff
vxge: Removed ioremap of unused bar addresses and their references
authorSreenivasa Honnur <Sreenivasa.Honnur@neterion.com>
Wed, 1 Jul 2009 21:12:23 +0000 (21:12 +0000)
committerDavid S. Miller <davem@davemloft.net>
Mon, 6 Jul 2009 02:16:24 +0000 (19:16 -0700)
- Removed ioremap of bar1 address
  Driver needs only bar0 address for register access
- Removed references to bar1 and bar2 addresses

Signed-off-by: Sreenivasa Honnur <sreenivasa.honnur@neterion.com>
Signed-off-by: Ramkrishna Vepa <ram.vepa@neterion.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
drivers/net/vxge/vxge-config.c
drivers/net/vxge/vxge-config.h
drivers/net/vxge/vxge-main.c
drivers/net/vxge/vxge-main.h

index 58d2551c78ed064aa1ba72bd384482df3d56f46b..9e94c4b0fb180c1b3756c627e093d64097ee0978 100644 (file)
@@ -313,14 +313,6 @@ __vxge_hw_device_reg_addr_get(struct __vxge_hw_device *hldev)
                hldev->kdfc = (u8 __iomem *)(hldev->bar0 +
                        VXGE_HW_TOC_GET_KDFC_INITIAL_OFFSET(val64));
                break;
-       case 2:
-               hldev->kdfc = (u8 __iomem *)(hldev->bar1 +
-                       VXGE_HW_TOC_GET_KDFC_INITIAL_OFFSET(val64));
-               break;
-       case 4:
-               hldev->kdfc = (u8 __iomem *)(hldev->bar2 +
-                       VXGE_HW_TOC_GET_KDFC_INITIAL_OFFSET(val64));
-               break;
        default:
                break;
        }
@@ -831,8 +823,6 @@ vxge_hw_device_initialize(
                sizeof(struct vxge_hw_device_config));
 
        hldev->bar0 = attr->bar0;
-       hldev->bar1 = attr->bar1;
-       hldev->bar2 = attr->bar2;
        hldev->pdev = attr->pdev;
 
        hldev->uld_callbacks.link_up = attr->uld_callbacks.link_up;
index afbdf6f4d224fc73c8b9c46063f464cb154a5471..224acea771ed8cadc7d2bac3b8196ed569f45f5d 100644 (file)
@@ -682,8 +682,6 @@ struct __vxge_hw_vpath_handle{
  * @major_revision: PCI Device major revision
  * @minor_revision: PCI Device minor revision
  * @bar0: BAR0 virtual address.
- * @bar1: BAR1 virtual address.
- * @bar2: BAR2 virtual address.
  * @pdev: Physical device handle
  * @config: Confguration passed by the LL driver at initialization
  * @link_state: Link state
@@ -698,8 +696,6 @@ struct __vxge_hw_device {
        u8                              major_revision;
        u8                              minor_revision;
        void __iomem                    *bar0;
-       void __iomem                    *bar1;
-       void __iomem                    *bar2;
        struct pci_dev                  *pdev;
        struct net_device               *ndev;
        struct vxge_hw_device_config    config;
@@ -788,17 +784,13 @@ struct vxge_hw_device_hw_info {
 /**
  * struct vxge_hw_device_attr - Device memory spaces.
  * @bar0: BAR0 virtual address.
- * @bar1: BAR1 virtual address.
- * @bar2: BAR2 virtual address.
  * @pdev: PCI device object.
  *
- * Device memory spaces. Includes configuration, BAR0, BAR1, etc. per device
+ * Device memory spaces. Includes configuration, BAR0 etc. per device
  * mapped memories. Also, includes a pointer to OS-specific PCI device object.
  */
 struct vxge_hw_device_attr {
        void __iomem            *bar0;
-       void __iomem            *bar1;
-       void __iomem            *bar2;
        struct pci_dev          *pdev;
        struct vxge_hw_uld_cbs  uld_callbacks;
 };
index fd0ebf78beadf42039af92b7b0405489f3fb9522..8a3c7b327cf607dd5c957b5254192db3518b8b85 100644 (file)
@@ -4152,18 +4152,6 @@ vxge_probe(struct pci_dev *pdev, const struct pci_device_id *pre)
                attr.bar0,
                (unsigned long long)pci_resource_start(pdev, 0));
 
-       attr.bar1 = pci_ioremap_bar(pdev, 2);
-       if (!attr.bar1) {
-               vxge_debug_init(VXGE_ERR,
-                       "%s : cannot remap io memory bar2", __func__);
-               ret = -ENODEV;
-               goto _exit3;
-       }
-       vxge_debug_ll_config(VXGE_TRACE,
-               "pci ioremap bar1: %p:0x%llx",
-               attr.bar1,
-               (unsigned long long)pci_resource_start(pdev, 2));
-
        status = vxge_hw_device_hw_info_get(attr.bar0,
                        &ll_config.device_hw_info);
        if (status != VXGE_HW_OK) {
@@ -4171,7 +4159,7 @@ vxge_probe(struct pci_dev *pdev, const struct pci_device_id *pre)
                        "%s: Reading of hardware info failed."
                        "Please try upgrading the firmware.", VXGE_DRIVER_NAME);
                ret = -EINVAL;
-               goto _exit4;
+               goto _exit3;
        }
 
        if (ll_config.device_hw_info.fw_version.major !=
@@ -4181,7 +4169,7 @@ vxge_probe(struct pci_dev *pdev, const struct pci_device_id *pre)
                        ll_config.device_hw_info.fw_version.major,
                        VXGE_DRIVER_VERSION_MAJOR);
                ret = -EINVAL;
-               goto _exit4;
+               goto _exit3;
        }
 
        vpath_mask = ll_config.device_hw_info.vpath_mask;
@@ -4189,7 +4177,7 @@ vxge_probe(struct pci_dev *pdev, const struct pci_device_id *pre)
                vxge_debug_ll_config(VXGE_TRACE,
                        "%s: No vpaths available in device", VXGE_DRIVER_NAME);
                ret = -EINVAL;
-               goto _exit4;
+               goto _exit3;
        }
 
        vxge_debug_ll_config(VXGE_TRACE,
@@ -4222,7 +4210,7 @@ vxge_probe(struct pci_dev *pdev, const struct pci_device_id *pre)
                vxge_debug_ll_config(VXGE_ERR,
                        "%s: No more vpaths to configure", VXGE_DRIVER_NAME);
                ret = 0;
-               goto _exit4;
+               goto _exit3;
        }
 
        /* Setting driver callbacks */
@@ -4235,7 +4223,7 @@ vxge_probe(struct pci_dev *pdev, const struct pci_device_id *pre)
                vxge_debug_init(VXGE_ERR,
                        "Failed to initialize device (%d)", status);
                        ret = -EINVAL;
-                       goto _exit4;
+                       goto _exit3;
        }
 
        vxge_hw_device_debug_set(hldev, VXGE_ERR, VXGE_COMPONENT_LL);
@@ -4260,7 +4248,7 @@ vxge_probe(struct pci_dev *pdev, const struct pci_device_id *pre)
        if (vxge_device_register(hldev, &ll_config, high_dma, no_of_vpath,
                &vdev)) {
                ret = -EINVAL;
-               goto _exit5;
+               goto _exit4;
        }
 
        vxge_hw_device_debug_set(hldev, VXGE_TRACE, VXGE_COMPONENT_LL);
@@ -4271,7 +4259,6 @@ vxge_probe(struct pci_dev *pdev, const struct pci_device_id *pre)
        hldev->ndev = vdev->ndev;
        vdev->mtu = VXGE_HW_DEFAULT_MTU;
        vdev->bar0 = attr.bar0;
-       vdev->bar1 = attr.bar1;
        vdev->max_vpath_supported = max_vpath_supported;
        vdev->no_of_vpath = no_of_vpath;
 
@@ -4353,7 +4340,7 @@ vxge_probe(struct pci_dev *pdev, const struct pci_device_id *pre)
                                "%s: mac_addr_list : memory allocation failed",
                                vdev->ndev->name);
                        ret = -EPERM;
-                       goto _exit6;
+                       goto _exit5;
                }
                macaddr = (u8 *)&entry->macaddr;
                memcpy(macaddr, vdev->ndev->dev_addr, ETH_ALEN);
@@ -4370,16 +4357,14 @@ vxge_probe(struct pci_dev *pdev, const struct pci_device_id *pre)
 
        return 0;
 
-_exit6:
+_exit5:
        for (i = 0; i < vdev->no_of_vpath; i++)
                vxge_free_mac_add_list(&vdev->vpaths[i]);
 
        vxge_device_unregister(hldev);
-_exit5:
+_exit4:
        pci_disable_sriov(pdev);
        vxge_hw_device_terminate(hldev);
-_exit4:
-       iounmap(attr.bar1);
 _exit3:
        iounmap(attr.bar0);
 _exit2:
@@ -4438,7 +4423,6 @@ vxge_remove(struct pci_dev *pdev)
        kfree(vdev->vpaths);
 
        iounmap(vdev->bar0);
-       iounmap(vdev->bar1);
 
        pci_disable_sriov(pdev);
 
index 9704b2bd4320f2ce04db042fd299237e853be466..3386970b7efc583768f416e348e85cf0eb5e96dd 100644 (file)
@@ -363,7 +363,6 @@ struct vxgedev {
 
        struct __vxge_hw_vpath_handle *vp_handles[VXGE_HW_MAX_VIRTUAL_PATHS];
        void __iomem *bar0;
-       void __iomem *bar1;
        struct vxge_sw_stats    stats;
        int             mtu;
        /* Below variables are used for vpath selection to transmit a packet */