D: portions of the Linux Security Module (LSM) framework and security modules
N: Petr Vandrovec
-E: vandrove@vc.cvut.cz
+E: petr@vandrovec.name
D: Small contributions to ncpfs
D: Matrox framebuffer driver
-S: Chudenicka 8
-S: 10200 Prague 10, Hostivar
-S: Czech Republic
+S: 21513 Conradia Ct
+S: Cupertino, CA 95014
+S: USA
N: Thibaut Varene
E: T-Bone@parisc-linux.org
Linux* Base Driver for the Intel(R) PRO/1000 Family of Adapters
===============================================================
-September 26, 2006
-
+Intel Gigabit Linux driver.
+Copyright(c) 1999 - 2010 Intel Corporation.
Contents
========
-- In This Release
- Identifying Your Adapter
-- Building and Installation
- Command Line Parameters
- Speed and Duplex Configuration
- Additional Configurations
-- Known Issues
- Support
-
-In This Release
-===============
-
-This file describes the Linux* Base Driver for the Intel(R) PRO/1000 Family
-of Adapters. This driver includes support for Itanium(R)2-based systems.
-
-For questions related to hardware requirements, refer to the documentation
-supplied with your Intel PRO/1000 adapter. All hardware requirements listed
-apply to use with Linux.
-
-The following features are now available in supported kernels:
- - Native VLANs
- - Channel Bonding (teaming)
- - SNMP
-
-Channel Bonding documentation can be found in the Linux kernel source:
-/Documentation/networking/bonding.txt
-
-The driver information previously displayed in the /proc filesystem is not
-supported in this release. Alternatively, you can use ethtool (version 1.6
-or later), lspci, and ifconfig to obtain the same information.
-
-Instructions on updating ethtool can be found in the section "Additional
-Configurations" later in this document.
-
-NOTE: The Intel(R) 82562v 10/100 Network Connection only provides 10/100
-support.
-
-
Identifying Your Adapter
========================
For more information on how to identify your adapter, go to the Adapter &
Driver ID Guide at:
- http://support.intel.com/support/network/adapter/pro100/21397.htm
+ http://support.intel.com/support/go/network/adapter/idguide.htm
For the latest Intel network drivers for Linux, refer to the following
website. In the search field, enter your adapter name or type, or use the
networking link on the left to search for your adapter:
- http://downloadfinder.intel.com/scripts-df/support_intel.asp
-
+ http://support.intel.com/support/go/network/adapter/home.htm
Command Line Parameters
=======================
-If the driver is built as a module, the following optional parameters
-are used by entering them on the command line with the modprobe command
-using this syntax:
-
- modprobe e1000 [<option>=<VAL1>,<VAL2>,...]
-
-For example, with two PRO/1000 PCI adapters, entering:
-
- modprobe e1000 TxDescriptors=80,128
-
-loads the e1000 driver with 80 TX descriptors for the first adapter and
-128 TX descriptors for the second adapter.
-
The default value for each parameter is generally the recommended setting,
unless otherwise noted.
parameters, see the application note at:
http://www.intel.com/design/network/applnots/ap450.htm
- A descriptor describes a data buffer and attributes related to
- the data buffer. This information is accessed by the hardware.
-
-
AutoNeg
-------
(Supported only on adapters with copper connections)
NOTE: Refer to the Speed and Duplex section of this readme for more
information on the AutoNeg parameter.
-
Duplex
------
(Supported only on adapters with copper connections)
link partner is forced (either full or half), Duplex defaults to half-
duplex.
-
FlowControl
-----------
Valid Range: 0-3 (0=none, 1=Rx only, 2=Tx only, 3=Rx&Tx)
This parameter controls the automatic generation(Tx) and response(Rx)
to Ethernet PAUSE frames.
-
InterruptThrottleRate
---------------------
(not supported on Intel(R) 82542, 82543 or 82544-based adapters)
-Valid Range: 0,1,3,100-100000 (0=off, 1=dynamic, 3=dynamic conservative)
+Valid Range: 0,1,3,4,100-100000 (0=off, 1=dynamic, 3=dynamic conservative,
+ 4=simplified balancing)
Default Value: 3
The driver can limit the amount of interrupts per second that the adapter
-will generate for incoming packets. It does this by writing a value to the
-adapter that is based on the maximum amount of interrupts that the adapter
+will generate for incoming packets. It does this by writing a value to the
+adapter that is based on the maximum amount of interrupts that the adapter
will generate per second.
Setting InterruptThrottleRate to a value greater or equal to 100
load on the system and can lower CPU utilization under heavy load,
but will increase latency as packets are not processed as quickly.
-The default behaviour of the driver previously assumed a static
-InterruptThrottleRate value of 8000, providing a good fallback value for
-all traffic types,but lacking in small packet performance and latency.
-The hardware can handle many more small packets per second however, and
+The default behaviour of the driver previously assumed a static
+InterruptThrottleRate value of 8000, providing a good fallback value for
+all traffic types,but lacking in small packet performance and latency.
+The hardware can handle many more small packets per second however, and
for this reason an adaptive interrupt moderation algorithm was implemented.
Since 7.3.x, the driver has two adaptive modes (setting 1 or 3) in which
-it dynamically adjusts the InterruptThrottleRate value based on the traffic
+it dynamically adjusts the InterruptThrottleRate value based on the traffic
that it receives. After determining the type of incoming traffic in the last
-timeframe, it will adjust the InterruptThrottleRate to an appropriate value
+timeframe, it will adjust the InterruptThrottleRate to an appropriate value
for that traffic.
The algorithm classifies the incoming traffic every interval into
-classes. Once the class is determined, the InterruptThrottleRate value is
-adjusted to suit that traffic type the best. There are three classes defined:
+classes. Once the class is determined, the InterruptThrottleRate value is
+adjusted to suit that traffic type the best. There are three classes defined:
"Bulk traffic", for large amounts of packets of normal size; "Low latency",
for small amounts of traffic and/or a significant percentage of small
-packets; and "Lowest latency", for almost completely small packets or
+packets; and "Lowest latency", for almost completely small packets or
minimal traffic.
-In dynamic conservative mode, the InterruptThrottleRate value is set to 4000
-for traffic that falls in class "Bulk traffic". If traffic falls in the "Low
-latency" or "Lowest latency" class, the InterruptThrottleRate is increased
+In dynamic conservative mode, the InterruptThrottleRate value is set to 4000
+for traffic that falls in class "Bulk traffic". If traffic falls in the "Low
+latency" or "Lowest latency" class, the InterruptThrottleRate is increased
stepwise to 20000. This default mode is suitable for most applications.
For situations where low latency is vital such as cluster or
grid computing, the algorithm can reduce latency even more when
InterruptThrottleRate is set to mode 1. In this mode, which operates
-the same as mode 3, the InterruptThrottleRate will be increased stepwise to
+the same as mode 3, the InterruptThrottleRate will be increased stepwise to
70000 for traffic in class "Lowest latency".
+In simplified mode the interrupt rate is based on the ratio of Tx and
+Rx traffic. If the bytes per second rate is approximately equal, the
+interrupt rate will drop as low as 2000 interrupts per second. If the
+traffic is mostly transmit or mostly receive, the interrupt rate could
+be as high as 8000.
+
Setting InterruptThrottleRate to 0 turns off any interrupt moderation
and may improve small packet latency, but is generally not suitable
for bulk throughput traffic.
be platform-specific. If CPU utilization is not a concern, use
RX_POLLING (NAPI) and default driver settings.
-
-
RxDescriptors
-------------
Valid Range: 80-256 for 82542 and 82543-based adapters
incoming packets, at the expense of increased system memory utilization.
Each descriptor is 16 bytes. A receive buffer is also allocated for each
-descriptor and can be either 2048, 4096, 8192, or 16384 bytes, depending
+descriptor and can be either 2048, 4096, 8192, or 16384 bytes, depending
on the MTU setting. The maximum MTU size is 16110.
-NOTE: MTU designates the frame size. It only needs to be set for Jumbo
- Frames. Depending on the available system resources, the request
- for a higher number of receive descriptors may be denied. In this
+NOTE: MTU designates the frame size. It only needs to be set for Jumbo
+ Frames. Depending on the available system resources, the request
+ for a higher number of receive descriptors may be denied. In this
case, use a lower number.
-
RxIntDelay
----------
Valid Range: 0-65535 (0=off)
restoring the network connection. To eliminate the potential
for the hang ensure that RxIntDelay is set to 0.
-
RxAbsIntDelay
-------------
(This parameter is supported only on 82540, 82545 and later adapters.)
along with RxIntDelay, may improve traffic throughput in specific network
conditions.
-
Speed
-----
(This parameter is supported only on adapters with copper connections.)
partner is set to auto-negotiate, the board will auto-detect the correct
speed. Duplex should also be set when Speed is set to either 10 or 100.
-
TxDescriptors
-------------
Valid Range: 80-256 for 82542 and 82543-based adapters
higher number of transmit descriptors may be denied. In this case,
use a lower number.
+TxDescriptorStep
+----------------
+Valid Range: 1 (use every Tx Descriptor)
+ 4 (use every 4th Tx Descriptor)
+
+Default Value: 1 (use every Tx Descriptor)
+
+On certain non-Intel architectures, it has been observed that intense TX
+traffic bursts of short packets may result in an improper descriptor
+writeback. If this occurs, the driver will report a "TX Timeout" and reset
+the adapter, after which the transmit flow will restart, though data may
+have stalled for as much as 10 seconds before it resumes.
+
+The improper writeback does not occur on the first descriptor in a system
+memory cache-line, which is typically 32 bytes, or 4 descriptors long.
+
+Setting TxDescriptorStep to a value of 4 will ensure that all TX descriptors
+are aligned to the start of a system memory cache line, and so this problem
+will not occur.
+
+NOTES: Setting TxDescriptorStep to 4 effectively reduces the number of
+ TxDescriptors available for transmits to 1/4 of the normal allocation.
+ This has a possible negative performance impact, which may be
+ compensated for by allocating more descriptors using the TxDescriptors
+ module parameter.
+
+ There are other conditions which may result in "TX Timeout", which will
+ not be resolved by the use of the TxDescriptorStep parameter. As the
+ issue addressed by this parameter has never been observed on Intel
+ Architecture platforms, it should not be used on Intel platforms.
TxIntDelay
----------
system is reporting dropped transmits, this value may be set too high
causing the driver to run out of available transmit descriptors.
-
TxAbsIntDelay
-------------
(This parameter is supported only on 82540, 82545 and later adapters.)
A value of '1' indicates that the driver should enable IP checksum
offload for received packets (both UDP and TCP) to the adapter hardware.
+Copybreak
+---------
+Valid Range: 0-xxxxxxx (0=off)
+Default Value: 256
+Usage: insmod e1000.ko copybreak=128
+
+Driver copies all packets below or equaling this size to a fresh Rx
+buffer before handing it up the stack.
+
+This parameter is different than other parameters, in that it is a
+single (not 1,1,1 etc.) parameter applied to all driver instances and
+it is also available during runtime at
+/sys/module/e1000/parameters/copybreak
+
+SmartPowerDownEnable
+--------------------
+Valid Range: 0-1
+Default Value: 0 (disabled)
+
+Allows PHY to turn off in lower power states. The user can turn off
+this parameter in supported chipsets.
+
+KumeranLockLoss
+---------------
+Valid Range: 0-1
+Default Value: 1 (enabled)
+
+This workaround skips resetting the PHY at shutdown for the initial
+silicon releases of ICH8 systems.
Speed and Duplex Configuration
==============================
parameter should not be used. Instead, use the Speed and Duplex parameters
previously mentioned to force the adapter to the same speed and duplex.
-
Additional Configurations
=========================
- Configuring the Driver on Different Distributions
- -------------------------------------------------
- Configuring a network driver to load properly when the system is started
- is distribution dependent. Typically, the configuration process involves
- adding an alias line to /etc/modules.conf or /etc/modprobe.conf as well
- as editing other system startup scripts and/or configuration files. Many
- popular Linux distributions ship with tools to make these changes for you.
- To learn the proper way to configure a network device for your system,
- refer to your distribution documentation. If during this process you are
- asked for the driver or module name, the name for the Linux Base Driver
- for the Intel(R) PRO/1000 Family of Adapters is e1000.
-
- As an example, if you install the e1000 driver for two PRO/1000 adapters
- (eth0 and eth1) and set the speed and duplex to 10full and 100half, add
- the following to modules.conf or or modprobe.conf:
-
- alias eth0 e1000
- alias eth1 e1000
- options e1000 Speed=10,100 Duplex=2,1
-
- Viewing Link Messages
- ---------------------
- Link messages will not be displayed to the console if the distribution is
- restricting system messages. In order to see network driver link messages
- on your console, set dmesg to eight by entering the following:
-
- dmesg -n 8
-
- NOTE: This setting is not saved across reboots.
-
Jumbo Frames
------------
Jumbo Frames support is enabled by changing the MTU to a value larger than
setting in a different location.
Notes:
-
- - To enable Jumbo Frames, increase the MTU size on the interface beyond
- 1500.
+ Degradation in throughput performance may be observed in some Jumbo frames
+ environments. If this is observed, increasing the application's socket buffer
+ size and/or increasing the /proc/sys/net/ipv4/tcp_*mem entry values may help.
+ See the specific application manual and /usr/src/linux*/Documentation/
+ networking/ip-sysctl.txt for more details.
- The maximum MTU setting for Jumbo Frames is 16110. This value coincides
with the maximum Jumbo Frames size of 16128.
- Using Jumbo Frames at 10 or 100 Mbps may result in poor performance or
loss of link.
- - Some Intel gigabit adapters that support Jumbo Frames have a frame size
- limit of 9238 bytes, with a corresponding MTU size limit of 9216 bytes.
- The adapters with this limitation are based on the Intel(R) 82571EB,
- 82572EI, 82573L and 80003ES2LAN controller. These correspond to the
- following product names:
- Intel(R) PRO/1000 PT Server Adapter
- Intel(R) PRO/1000 PT Desktop Adapter
- Intel(R) PRO/1000 PT Network Connection
- Intel(R) PRO/1000 PT Dual Port Server Adapter
- Intel(R) PRO/1000 PT Dual Port Network Connection
- Intel(R) PRO/1000 PF Server Adapter
- Intel(R) PRO/1000 PF Network Connection
- Intel(R) PRO/1000 PF Dual Port Server Adapter
- Intel(R) PRO/1000 PB Server Connection
- Intel(R) PRO/1000 PL Network Connection
- Intel(R) PRO/1000 EB Network Connection with I/O Acceleration
- Intel(R) PRO/1000 EB Backplane Connection with I/O Acceleration
- Intel(R) PRO/1000 PT Quad Port Server Adapter
-
- Adapters based on the Intel(R) 82542 and 82573V/E controller do not
support Jumbo Frames. These correspond to the following product names:
Intel(R) PRO/1000 Gigabit Server Adapter
Intel(R) PRO/1000 PM Network Connection
- - The following adapters do not support Jumbo Frames:
- Intel(R) 82562V 10/100 Network Connection
- Intel(R) 82566DM Gigabit Network Connection
- Intel(R) 82566DC Gigabit Network Connection
- Intel(R) 82566MM Gigabit Network Connection
- Intel(R) 82566MC Gigabit Network Connection
- Intel(R) 82562GT 10/100 Network Connection
- Intel(R) 82562G 10/100 Network Connection
-
-
Ethtool
-------
The driver utilizes the ethtool interface for driver configuration and
The latest release of ethtool can be found from
http://sourceforge.net/projects/gkernel.
- NOTE: Ethtool 1.6 only supports a limited set of ethtool options. Support
- for a more complete ethtool feature set can be enabled by upgrading
- ethtool to ethtool-1.8.1.
-
Enabling Wake on LAN* (WoL)
---------------------------
- WoL is configured through the Ethtool* utility. Ethtool is included with
- all versions of Red Hat after Red Hat 7.2. For other Linux distributions,
- download and install Ethtool from the following website:
- http://sourceforge.net/projects/gkernel.
-
- For instructions on enabling WoL with Ethtool, refer to the website listed
- above.
+ WoL is configured through the Ethtool* utility.
WoL will be enabled on the system during the next shut down or reboot.
For this driver version, in order to enable WoL, the e1000 driver must be
loaded when shutting down or rebooting the system.
- Wake On LAN is only supported on port A for the following devices:
- Intel(R) PRO/1000 PT Dual Port Network Connection
- Intel(R) PRO/1000 PT Dual Port Server Connection
- Intel(R) PRO/1000 PT Dual Port Server Adapter
- Intel(R) PRO/1000 PF Dual Port Server Adapter
- Intel(R) PRO/1000 PT Quad Port Server Adapter
-
- NAPI
- ----
- NAPI (Rx polling mode) is enabled in the e1000 driver.
-
- See www.cyberus.ca/~hadi/usenix-paper.tgz for more information on NAPI.
-
-
-Known Issues
-============
-
-Dropped Receive Packets on Half-duplex 10/100 Networks
-------------------------------------------------------
-If you have an Intel PCI Express adapter running at 10mbps or 100mbps, half-
-duplex, you may observe occasional dropped receive packets. There are no
-workarounds for this problem in this network configuration. The network must
-be updated to operate in full-duplex, and/or 1000mbps only.
-
-Jumbo Frames System Requirement
--------------------------------
-Memory allocation failures have been observed on Linux systems with 64 MB
-of RAM or less that are running Jumbo Frames. If you are using Jumbo
-Frames, your system may require more than the advertised minimum
-requirement of 64 MB of system memory.
-
-Performance Degradation with Jumbo Frames
------------------------------------------
-Degradation in throughput performance may be observed in some Jumbo frames
-environments. If this is observed, increasing the application's socket
-buffer size and/or increasing the /proc/sys/net/ipv4/tcp_*mem entry values
-may help. See the specific application manual and
-/usr/src/linux*/Documentation/
-networking/ip-sysctl.txt for more details.
-
-Jumbo Frames on Foundry BigIron 8000 switch
--------------------------------------------
-There is a known issue using Jumbo frames when connected to a Foundry
-BigIron 8000 switch. This is a 3rd party limitation. If you experience
-loss of packets, lower the MTU size.
-
-Allocating Rx Buffers when Using Jumbo Frames
----------------------------------------------
-Allocating Rx buffers when using Jumbo Frames on 2.6.x kernels may fail if
-the available memory is heavily fragmented. This issue may be seen with PCI-X
-adapters or with packet split disabled. This can be reduced or eliminated
-by changing the amount of available memory for receive buffer allocation, by
-increasing /proc/sys/vm/min_free_kbytes.
-
-Multiple Interfaces on Same Ethernet Broadcast Network
-------------------------------------------------------
-Due to the default ARP behavior on Linux, it is not possible to have
-one system on two IP networks in the same Ethernet broadcast domain
-(non-partitioned switch) behave as expected. All Ethernet interfaces
-will respond to IP traffic for any IP address assigned to the system.
-This results in unbalanced receive traffic.
-
-If you have multiple interfaces in a server, either turn on ARP
-filtering by entering:
-
- echo 1 > /proc/sys/net/ipv4/conf/all/arp_filter
-(this only works if your kernel's version is higher than 2.4.5),
-
-NOTE: This setting is not saved across reboots. The configuration
-change can be made permanent by adding the line:
- net.ipv4.conf.all.arp_filter = 1
-to the file /etc/sysctl.conf
-
- or,
-
-install the interfaces in separate broadcast domains (either in
-different switches or in a switch partitioned to VLANs).
-
-82541/82547 can't link or are slow to link with some link partners
------------------------------------------------------------------
-There is a known compatibility issue with 82541/82547 and some
-low-end switches where the link will not be established, or will
-be slow to establish. In particular, these switches are known to
-be incompatible with 82541/82547:
-
- Planex FXG-08TE
- I-O Data ETG-SH8
-
-To workaround this issue, the driver can be compiled with an override
-of the PHY's master/slave setting. Forcing master or forcing slave
-mode will improve time-to-link.
-
- # make CFLAGS_EXTRA=-DE1000_MASTER_SLAVE=<n>
-
-Where <n> is:
-
- 0 = Hardware default
- 1 = Master mode
- 2 = Slave mode
- 3 = Auto master/slave
-
-Disable rx flow control with ethtool
-------------------------------------
-In order to disable receive flow control using ethtool, you must turn
-off auto-negotiation on the same command line.
-
-For example:
-
- ethtool -A eth? autoneg off rx off
-
-Unplugging network cable while ethtool -p is running
-----------------------------------------------------
-In kernel versions 2.5.50 and later (including 2.6 kernel), unplugging
-the network cable while ethtool -p is running will cause the system to
-become unresponsive to keyboard commands, except for control-alt-delete.
-Restarting the system appears to be the only remedy.
-
-
Support
=======
--- /dev/null
+Linux* Driver for Intel(R) Network Connection
+===============================================================
+
+Intel Gigabit Linux driver.
+Copyright(c) 1999 - 2010 Intel Corporation.
+
+Contents
+========
+
+- Identifying Your Adapter
+- Command Line Parameters
+- Additional Configurations
+- Support
+
+Identifying Your Adapter
+========================
+
+The e1000e driver supports all PCI Express Intel(R) Gigabit Network
+Connections, except those that are 82575, 82576 and 82580-based*.
+
+* NOTE: The Intel(R) PRO/1000 P Dual Port Server Adapter is supported by
+ the e1000 driver, not the e1000e driver due to the 82546 part being used
+ behind a PCI Express bridge.
+
+For more information on how to identify your adapter, go to the Adapter &
+Driver ID Guide at:
+
+ http://support.intel.com/support/go/network/adapter/idguide.htm
+
+For the latest Intel network drivers for Linux, refer to the following
+website. In the search field, enter your adapter name or type, or use the
+networking link on the left to search for your adapter:
+
+ http://support.intel.com/support/go/network/adapter/home.htm
+
+Command Line Parameters
+=======================
+
+The default value for each parameter is generally the recommended setting,
+unless otherwise noted.
+
+NOTES: For more information about the InterruptThrottleRate,
+ RxIntDelay, TxIntDelay, RxAbsIntDelay, and TxAbsIntDelay
+ parameters, see the application note at:
+ http://www.intel.com/design/network/applnots/ap450.htm
+
+InterruptThrottleRate
+---------------------
+Valid Range: 0,1,3,4,100-100000 (0=off, 1=dynamic, 3=dynamic conservative,
+ 4=simplified balancing)
+Default Value: 3
+
+The driver can limit the amount of interrupts per second that the adapter
+will generate for incoming packets. It does this by writing a value to the
+adapter that is based on the maximum amount of interrupts that the adapter
+will generate per second.
+
+Setting InterruptThrottleRate to a value greater or equal to 100
+will program the adapter to send out a maximum of that many interrupts
+per second, even if more packets have come in. This reduces interrupt
+load on the system and can lower CPU utilization under heavy load,
+but will increase latency as packets are not processed as quickly.
+
+The driver has two adaptive modes (setting 1 or 3) in which
+it dynamically adjusts the InterruptThrottleRate value based on the traffic
+that it receives. After determining the type of incoming traffic in the last
+timeframe, it will adjust the InterruptThrottleRate to an appropriate value
+for that traffic.
+
+The algorithm classifies the incoming traffic every interval into
+classes. Once the class is determined, the InterruptThrottleRate value is
+adjusted to suit that traffic type the best. There are three classes defined:
+"Bulk traffic", for large amounts of packets of normal size; "Low latency",
+for small amounts of traffic and/or a significant percentage of small
+packets; and "Lowest latency", for almost completely small packets or
+minimal traffic.
+
+In dynamic conservative mode, the InterruptThrottleRate value is set to 4000
+for traffic that falls in class "Bulk traffic". If traffic falls in the "Low
+latency" or "Lowest latency" class, the InterruptThrottleRate is increased
+stepwise to 20000. This default mode is suitable for most applications.
+
+For situations where low latency is vital such as cluster or
+grid computing, the algorithm can reduce latency even more when
+InterruptThrottleRate is set to mode 1. In this mode, which operates
+the same as mode 3, the InterruptThrottleRate will be increased stepwise to
+70000 for traffic in class "Lowest latency".
+
+In simplified mode the interrupt rate is based on the ratio of Tx and
+Rx traffic. If the bytes per second rate is approximately equal the
+interrupt rate will drop as low as 2000 interrupts per second. If the
+traffic is mostly transmit or mostly receive, the interrupt rate could
+be as high as 8000.
+
+Setting InterruptThrottleRate to 0 turns off any interrupt moderation
+and may improve small packet latency, but is generally not suitable
+for bulk throughput traffic.
+
+NOTE: InterruptThrottleRate takes precedence over the TxAbsIntDelay and
+ RxAbsIntDelay parameters. In other words, minimizing the receive
+ and/or transmit absolute delays does not force the controller to
+ generate more interrupts than what the Interrupt Throttle Rate
+ allows.
+
+NOTE: When e1000e is loaded with default settings and multiple adapters
+ are in use simultaneously, the CPU utilization may increase non-
+ linearly. In order to limit the CPU utilization without impacting
+ the overall throughput, we recommend that you load the driver as
+ follows:
+
+ modprobe e1000e InterruptThrottleRate=3000,3000,3000
+
+ This sets the InterruptThrottleRate to 3000 interrupts/sec for
+ the first, second, and third instances of the driver. The range
+ of 2000 to 3000 interrupts per second works on a majority of
+ systems and is a good starting point, but the optimal value will
+ be platform-specific. If CPU utilization is not a concern, use
+ RX_POLLING (NAPI) and default driver settings.
+
+RxIntDelay
+----------
+Valid Range: 0-65535 (0=off)
+Default Value: 0
+
+This value delays the generation of receive interrupts in units of 1.024
+microseconds. Receive interrupt reduction can improve CPU efficiency if
+properly tuned for specific network traffic. Increasing this value adds
+extra latency to frame reception and can end up decreasing the throughput
+of TCP traffic. If the system is reporting dropped receives, this value
+may be set too high, causing the driver to run out of available receive
+descriptors.
+
+CAUTION: When setting RxIntDelay to a value other than 0, adapters may
+ hang (stop transmitting) under certain network conditions. If
+ this occurs a NETDEV WATCHDOG message is logged in the system
+ event log. In addition, the controller is automatically reset,
+ restoring the network connection. To eliminate the potential
+ for the hang ensure that RxIntDelay is set to 0.
+
+RxAbsIntDelay
+-------------
+Valid Range: 0-65535 (0=off)
+Default Value: 8
+
+This value, in units of 1.024 microseconds, limits the delay in which a
+receive interrupt is generated. Useful only if RxIntDelay is non-zero,
+this value ensures that an interrupt is generated after the initial
+packet is received within the set amount of time. Proper tuning,
+along with RxIntDelay, may improve traffic throughput in specific network
+conditions.
+
+TxIntDelay
+----------
+Valid Range: 0-65535 (0=off)
+Default Value: 8
+
+This value delays the generation of transmit interrupts in units of
+1.024 microseconds. Transmit interrupt reduction can improve CPU
+efficiency if properly tuned for specific network traffic. If the
+system is reporting dropped transmits, this value may be set too high
+causing the driver to run out of available transmit descriptors.
+
+TxAbsIntDelay
+-------------
+Valid Range: 0-65535 (0=off)
+Default Value: 32
+
+This value, in units of 1.024 microseconds, limits the delay in which a
+transmit interrupt is generated. Useful only if TxIntDelay is non-zero,
+this value ensures that an interrupt is generated after the initial
+packet is sent on the wire within the set amount of time. Proper tuning,
+along with TxIntDelay, may improve traffic throughput in specific
+network conditions.
+
+Copybreak
+---------
+Valid Range: 0-xxxxxxx (0=off)
+Default Value: 256
+
+Driver copies all packets below or equaling this size to a fresh Rx
+buffer before handing it up the stack.
+
+This parameter is different than other parameters, in that it is a
+single (not 1,1,1 etc.) parameter applied to all driver instances and
+it is also available during runtime at
+/sys/module/e1000e/parameters/copybreak
+
+SmartPowerDownEnable
+--------------------
+Valid Range: 0-1
+Default Value: 0 (disabled)
+
+Allows PHY to turn off in lower power states. The user can set this parameter
+in supported chipsets.
+
+KumeranLockLoss
+---------------
+Valid Range: 0-1
+Default Value: 1 (enabled)
+
+This workaround skips resetting the PHY at shutdown for the initial
+silicon releases of ICH8 systems.
+
+IntMode
+-------
+Valid Range: 0-2 (0=legacy, 1=MSI, 2=MSI-X)
+Default Value: 2
+
+Allows changing the interrupt mode at module load time, without requiring a
+recompile. If the driver load fails to enable a specific interrupt mode, the
+driver will try other interrupt modes, from least to most compatible. The
+interrupt order is MSI-X, MSI, Legacy. If specifying MSI (IntMode=1)
+interrupts, only MSI and Legacy will be attempted.
+
+CrcStripping
+------------
+Valid Range: 0-1
+Default Value: 1 (enabled)
+
+Strip the CRC from received packets before sending up the network stack. If
+you have a machine with a BMC enabled but cannot receive IPMI traffic after
+loading or enabling the driver, try disabling this feature.
+
+WriteProtectNVM
+---------------
+Valid Range: 0-1
+Default Value: 1 (enabled)
+
+Set the hardware to ignore all write/erase cycles to the GbE region in the
+ICHx NVM (non-volatile memory). This feature can be disabled by the
+WriteProtectNVM module parameter (enabled by default) only after a hardware
+reset, but the machine must be power cycled before trying to enable writes.
+
+Note: the kernel boot option iomem=relaxed may need to be set if the kernel
+config option CONFIG_STRICT_DEVMEM=y, if the root user wants to write the
+NVM from user space via ethtool.
+
+Additional Configurations
+=========================
+
+ Jumbo Frames
+ ------------
+ Jumbo Frames support is enabled by changing the MTU to a value larger than
+ the default of 1500. Use the ifconfig command to increase the MTU size.
+ For example:
+
+ ifconfig eth<x> mtu 9000 up
+
+ This setting is not saved across reboots.
+
+ Notes:
+
+ - The maximum MTU setting for Jumbo Frames is 9216. This value coincides
+ with the maximum Jumbo Frames size of 9234 bytes.
+
+ - Using Jumbo Frames at 10 or 100 Mbps is not supported and may result in
+ poor performance or loss of link.
+
+ - Some adapters limit Jumbo Frames sized packets to a maximum of
+ 4096 bytes and some adapters do not support Jumbo Frames.
+
+
+ Ethtool
+ -------
+ The driver utilizes the ethtool interface for driver configuration and
+ diagnostics, as well as displaying statistical information. We
+ strongly recommend downloading the latest version of Ethtool at:
+
+ http://sourceforge.net/projects/gkernel.
+
+ Speed and Duplex
+ ----------------
+ Speed and Duplex are configured through the Ethtool* utility. For
+ instructions, refer to the Ethtool man page.
+
+ Enabling Wake on LAN* (WoL)
+ ---------------------------
+ WoL is configured through the Ethtool* utility. For instructions on
+ enabling WoL with Ethtool, refer to the Ethtool man page.
+
+ WoL will be enabled on the system during the next shut down or reboot.
+ For this driver version, in order to enable WoL, the e1000e driver must be
+ loaded when shutting down or rebooting the system.
+
+ In most cases Wake On LAN is only supported on port A for multiple port
+ adapters. To verify if a port supports Wake on LAN run ethtool eth<X>.
+
+
+Support
+=======
+
+For general information, go to the Intel support website at:
+
+ www.intel.com/support/
+
+or the Intel Wired Networking project hosted by Sourceforge at:
+
+ http://sourceforge.net/projects/e1000
+
+If an issue is identified with the released source code on the supported
+kernel with a supported adapter, email the specific information related
+to the issue to e1000-devel@lists.sf.net
Linux* Base Driver for Intel(R) Network Connection
==================================================
-November 24, 2009
+Intel Gigabit Linux driver.
+Copyright(c) 1999 - 2010 Intel Corporation.
Contents
========
-- In This Release
- Identifying Your Adapter
- Known Issues/Troubleshooting
- Support
-In This Release
-===============
-
This file describes the ixgbevf Linux* Base Driver for Intel Network
Connection.
For more information on how to identify your adapter, go to the Adapter &
Driver ID Guide at:
- http://support.intel.com/support/network/sb/CS-008441.htm
+ http://support.intel.com/support/go/network/adapter/idguide.htm
Known Issues/Troubleshooting
============================
If an issue is identified with the released source code on the supported
kernel with a supported adapter, email the specific information related
to the issue to e1000-devel@lists.sf.net
-
-License
-=======
-
-Intel 10 Gigabit Linux driver.
-Copyright(c) 1999 - 2009 Intel Corporation.
-
-This program is free software; you can redistribute it and/or modify it
-under the terms and conditions of the GNU General Public License,
-version 2, as published by the Free Software Foundation.
-
-This program is distributed in the hope it will be useful, but WITHOUT
-ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
-more details.
-
-You should have received a copy of the GNU General Public License along with
-this program; if not, write to the Free Software Foundation, Inc.,
-51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
-The full GNU General Public License is included in this distribution in
-the file called "COPYING".
-
-Trademarks
-==========
-
-Intel, Itanium, and Pentium are trademarks or registered trademarks of
-Intel Corporation or its subsidiaries in the United States and other
-countries.
-
-* Other names and brands may be claimed as the property of others.
}
if (opt_unpoison && !hwpoison_forget_fd) {
- sprintf(buf, "%s/renew-pfn", hwpoison_debug_fs);
+ sprintf(buf, "%s/unpoison-pfn", hwpoison_debug_fs);
hwpoison_forget_fd = checked_open(buf, O_WRONLY);
}
}
S: Maintained
F: arch/arm/mach-s3c6410/
+ARM/S5P ARM ARCHITECTURES
+M: Kukjin Kim <kgene.kim@samsung.com>
+L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+L: linux-samsung-soc@vger.kernel.org (moderated for non-subscribers)
+S: Maintained
+F: arch/arm/mach-s5p*/
+
+ARM/SAMSUNG S5P SERIES FIMC SUPPORT
+M: Kyungmin Park <kyungmin.park@samsung.com>
+M: Sylwester Nawrocki <s.nawrocki@samsung.com>
+L: linux-arm-kernel@lists.infradead.org
+L: linux-media@vger.kernel.org
+S: Maintained
+F: arch/arm/plat-s5p/dev-fimc*
+F: arch/arm/plat-samsung/include/plat/*fimc*
+F: drivers/media/video/s5p-fimc/
+
ARM/SHMOBILE ARM ARCHITECTURE
M: Paul Mundt <lethal@linux-sh.org>
M: Magnus Damm <magnus.damm@gmail.com>
F: include/linux/cfag12864b.h
AVR32 ARCHITECTURE
-M: Haavard Skinnemoen <hskinnemoen@atmel.com>
+M: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
W: http://www.atmel.com/products/AVR32/
W: http://avr32linux.org/
W: http://avrfreaks.net/
F: arch/avr32/
AVR32/AT32AP MACHINE SUPPORT
-M: Haavard Skinnemoen <hskinnemoen@atmel.com>
+M: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
S: Supported
F: arch/avr32/mach-at32ap/
S: Maintained
F: drivers/platform/x86/eeepc-laptop.c
+EFIFB FRAMEBUFFER DRIVER
+L: linux-fbdev@vger.kernel.org
+M: Peter Jones <pjones@redhat.com>
+S: Maintained
+F: drivers/video/efifb.c
+
EFS FILESYSTEM
W: http://aeschi.ch.eu.org/efs/
S: Orphan
F: drivers/scsi/gdt*
GENERIC GPIO I2C DRIVER
-M: Haavard Skinnemoen <hskinnemoen@atmel.com>
+M: Haavard Skinnemoen <hskinnemoen@gmail.com>
S: Supported
F: drivers/i2c/busses/i2c-gpio.c
F: include/linux/i2c-gpio.h
L: lm-sensors@lm-sensors.org
W: http://www.lm-sensors.org/
T: quilt kernel.org/pub/linux/kernel/people/jdelvare/linux-2.6/jdelvare-hwmon/
+T: quilt kernel.org/pub/linux/kernel/people/groeck/linux-staging/
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging.git
S: Maintained
F: Documentation/hwmon/
F: drivers/hwmon/
S: Maintained
F: drivers/net/ixp2000/
-INTEL ETHERNET DRIVERS (e100/e1000/e1000e/igb/igbvf/ixgb/ixgbe)
+INTEL ETHERNET DRIVERS (e100/e1000/e1000e/igb/igbvf/ixgb/ixgbe/ixgbevf)
M: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
M: Jesse Brandeburg <jesse.brandeburg@intel.com>
M: Bruce Allan <bruce.w.allan@intel.com>
-M: Alex Duyck <alexander.h.duyck@intel.com>
+M: Carolyn Wyborny <carolyn.wyborny@intel.com>
+M: Don Skidmore <donald.c.skidmore@intel.com>
+M: Greg Rose <gregory.v.rose@intel.com>
M: PJ Waskiewicz <peter.p.waskiewicz.jr@intel.com>
+M: Alex Duyck <alexander.h.duyck@intel.com>
M: John Ronciak <john.ronciak@intel.com>
L: e1000-devel@lists.sourceforge.net
W: http://e1000.sourceforge.net/
S: Supported
+F: Documentation/networking/e100.txt
+F: Documentation/networking/e1000.txt
+F: Documentation/networking/e1000e.txt
+F: Documentation/networking/igb.txt
+F: Documentation/networking/igbvf.txt
+F: Documentation/networking/ixgb.txt
+F: Documentation/networking/ixgbe.txt
+F: Documentation/networking/ixgbevf.txt
F: drivers/net/e100.c
F: drivers/net/e1000/
F: drivers/net/e1000e/
F: drivers/net/igbvf/
F: drivers/net/ixgb/
F: drivers/net/ixgbe/
+F: drivers/net/ixgbevf/
INTEL PRO/WIRELESS 2100 NETWORK CONNECTION SUPPORT
L: linux-wireless@vger.kernel.org
IOC3 SERIAL DRIVER
M: Pat Gefre <pfg@sgi.com>
-L: linux-mips@linux-mips.org
+L: linux-serial@vger.kernel.org
S: Maintained
F: drivers/serial/ioc3_serial.c
S: Supported
MATROX FRAMEBUFFER DRIVER
-M: Petr Vandrovec <vandrove@vc.cvut.cz>
L: linux-fbdev@vger.kernel.org
-S: Maintained
+S: Orphan
F: drivers/video/matrox/matroxfb_*
F: include/linux/matroxfb.h
F: drivers/char/mxser.*
MSI LAPTOP SUPPORT
-M: Lennart Poettering <mzxreary@0pointer.de>
+M: Lee, Chun-Yi <jlee@novell.com>
L: platform-driver-x86@vger.kernel.org
-W: https://tango.0pointer.de/mailman/listinfo/s270-linux
-W: http://0pointer.de/lennart/tchibo.html
S: Maintained
F: drivers/platform/x86/msi-laptop.c
F: drivers/mfd/
MULTIMEDIA CARD (MMC), SECURE DIGITAL (SD) AND SDIO SUBSYSTEM
-S: Orphan
+M: Chris Ball <cjb@laptop.org>
L: linux-mmc@vger.kernel.org
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc.git
+S: Maintained
F: drivers/mmc/
F: include/linux/mmc/
F: include/linux/isicom.h
MUSB MULTIPOINT HIGH SPEED DUAL-ROLE CONTROLLER
-M: Felipe Balbi <felipe.balbi@nokia.com>
+M: Felipe Balbi <balbi@ti.com>
L: linux-usb@vger.kernel.org
T: git git://gitorious.org/usb/usb.git
S: Maintained
F: drivers/net/natsemi.c
NCP FILESYSTEM
-M: Petr Vandrovec <vandrove@vc.cvut.cz>
-S: Maintained
+M: Petr Vandrovec <petr@vandrovec.name>
+S: Odd Fixes
F: fs/ncpfs/
NCR DUAL 700 SCSI DRIVER (MICROCHANNEL)
F: drivers/char/hw_random/omap-rng.c
OMAP USB SUPPORT
-M: Felipe Balbi <felipe.balbi@nokia.com>
+M: Felipe Balbi <balbi@ti.com>
M: David Brownell <dbrownell@users.sourceforge.net>
L: linux-usb@vger.kernel.org
L: linux-omap@vger.kernel.org
F: drivers/media/video/*7146*
F: include/media/*7146*
+SAMSUNG AUDIO (ASoC) DRIVERS
+M: Jassi Brar <jassi.brar@samsung.com>
+L: alsa-devel@alsa-project.org (moderated for non-subscribers)
+S: Supported
+F: sound/soc/s3c24xx
+
TLG2300 VIDEO4LINUX-2 DRIVER
M: Huang Shijie <shijie8@gmail.com>
M: Kang Yong <kangyong@telegent.com>
F: drivers/mmc/host/sdricoh_cs.c
SECURE DIGITAL HOST CONTROLLER INTERFACE (SDHCI) DRIVER
-S: Orphan
+M: Chris Ball <cjb@laptop.org>
L: linux-mmc@vger.kernel.org
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc.git
+S: Maintained
F: drivers/mmc/host/sdhci.*
SECURE DIGITAL HOST CONTROLLER INTERFACE, OPEN FIRMWARE BINDINGS (SDHCI-OF)
WOLFSON MICROELECTRONICS DRIVERS
M: Mark Brown <broonie@opensource.wolfsonmicro.com>
M: Ian Lartey <ian@opensource.wolfsonmicro.com>
+M: Dimitris Papastamos <dp@opensource.wolfsonmicro.com>
+T: git git://opensource.wolfsonmicro.com/linux-2.6-asoc
T: git git://opensource.wolfsonmicro.com/linux-2.6-audioplus
-W: http://opensource.wolfsonmicro.com/node/8
+W: http://opensource.wolfsonmicro.com/content/linux-drivers-wolfson-devices
S: Supported
F: Documentation/hwmon/wm83??
F: drivers/leds/leds-wm83*.c
VERSION = 2
PATCHLEVEL = 6
SUBLEVEL = 36
-EXTRAVERSION = -rc4
-NAME = Sheep on Meth
+EXTRAVERSION =
+NAME = Flesh-Eating Bats with Fangs
# *DOCUMENTATION*
# To see a list of typical targets execute "make help"
config KPROBES
bool "Kprobes"
- depends on KALLSYMS && MODULES
+ depends on MODULES
depends on HAVE_KPROBES
+ select KALLSYMS
help
Kprobes allows you to trap at almost any kernel address and
execute a callback function. register_kprobe() establishes
def_bool y
depends on KPROBES && HAVE_OPTPROBES
depends on !PREEMPT
- select KALLSYMS_ALL
config HAVE_EFFICIENT_UNALIGNED_ACCESS
bool
ldq $20, HAE_REG($19); \
stq $21, HAE_CACHE($19); \
stq $21, 0($20); \
- ldq $0, 0($sp); \
- ldq $1, 8($sp); \
99:; \
ldq $19, 72($sp); \
ldq $20, 80($sp); \
cmovne $26, 0, $19 /* $19 = 0 => non-restartable */
ldq $0, SP_OFF($sp)
and $0, 8, $0
- beq $0, restore_all
+ beq $0, ret_to_kernel
ret_to_user:
/* Make sure need_resched and sigpending don't change between
sampling and the rti. */
RESTORE_ALL
call_pal PAL_rti
+ret_to_kernel:
+ lda $16, 7
+ call_pal PAL_swpipl
+ br restore_all
+
.align 3
$syscall_error:
/*
/* We don't actually care for a3 success widgetry in the kernel.
Not for positive errno values. */
stq $0, 0($sp) /* $0 */
- br restore_all
+ br ret_to_kernel
.end kernel_thread
/*
jmp $31, do_sys_execve
.end sys_execve
- .align 4
- .globl osf_sigprocmask
- .ent osf_sigprocmask
-osf_sigprocmask:
- .prologue 0
- mov $sp, $18
- jmp $31, sys_osf_sigprocmask
-.end osf_sigprocmask
-
.align 4
.globl alpha_ni_syscall
.ent alpha_ni_syscall
dest[27] = pt->r27;
dest[28] = pt->r28;
dest[29] = pt->gp;
- dest[30] = rdusp();
+ dest[30] = ti == current_thread_info() ? rdusp() : ti->pcb.usp;
dest[31] = pt->pc;
/* Once upon a time this was the PS value. Which is stupid
/*
* The OSF/1 sigprocmask calling sequence is different from the
* C sigprocmask() sequence..
- *
- * how:
- * 1 - SIG_BLOCK
- * 2 - SIG_UNBLOCK
- * 3 - SIG_SETMASK
- *
- * We change the range to -1 .. 1 in order to let gcc easily
- * use the conditional move instructions.
- *
- * Note that we don't need to acquire the kernel lock for SMP
- * operation, as all of this is local to this thread.
*/
-SYSCALL_DEFINE3(osf_sigprocmask, int, how, unsigned long, newmask,
- struct pt_regs *, regs)
+SYSCALL_DEFINE2(osf_sigprocmask, int, how, unsigned long, newmask)
{
- unsigned long oldmask = -EINVAL;
-
- if ((unsigned long)how-1 <= 2) {
- long sign = how-2; /* -1 .. 1 */
- unsigned long block, unblock;
-
- newmask &= _BLOCKABLE;
- spin_lock_irq(¤t->sighand->siglock);
- oldmask = current->blocked.sig[0];
-
- unblock = oldmask & ~newmask;
- block = oldmask | newmask;
- if (!sign)
- block = unblock;
- if (sign <= 0)
- newmask = block;
- if (_NSIG_WORDS > 1 && sign > 0)
- sigemptyset(¤t->blocked);
- current->blocked.sig[0] = newmask;
- recalc_sigpending();
- spin_unlock_irq(¤t->sighand->siglock);
-
- regs->r0 = 0; /* special no error return */
+ sigset_t oldmask;
+ sigset_t mask;
+ unsigned long res;
+
+ siginitset(&mask, newmask & _BLOCKABLE);
+ res = sigprocmask(how, &mask, &oldmask);
+ if (!res) {
+ force_successful_syscall_return();
+ res = oldmask.sig[0];
}
- return oldmask;
+ return res;
}
SYSCALL_DEFINE3(osf_sigaction, int, sig,
old_sigset_t mask;
if (!access_ok(VERIFY_READ, act, sizeof(*act)) ||
__get_user(new_ka.sa.sa_handler, &act->sa_handler) ||
- __get_user(new_ka.sa.sa_flags, &act->sa_flags))
+ __get_user(new_ka.sa.sa_flags, &act->sa_flags) ||
+ __get_user(mask, &act->sa_mask))
return -EFAULT;
- __get_user(mask, &act->sa_mask);
siginitset(&new_ka.sa.sa_mask, mask);
new_ka.ka_restorer = NULL;
}
if (!ret && oact) {
if (!access_ok(VERIFY_WRITE, oact, sizeof(*oact)) ||
__put_user(old_ka.sa.sa_handler, &oact->sa_handler) ||
- __put_user(old_ka.sa.sa_flags, &oact->sa_flags))
+ __put_user(old_ka.sa.sa_flags, &oact->sa_flags) ||
+ __put_user(old_ka.sa.sa_mask.sig[0], &oact->sa_mask))
return -EFAULT;
- __put_user(old_ka.sa.sa_mask.sig[0], &oact->sa_mask);
}
return ret;
.quad sys_open /* 45 */
.quad alpha_ni_syscall
.quad sys_getxgid
- .quad osf_sigprocmask
+ .quad sys_osf_sigprocmask
.quad alpha_ni_syscall
.quad alpha_ni_syscall /* 50 */
.quad sys_acct
bool "Atmel AT91"
select ARCH_REQUIRE_GPIOLIB
select HAVE_CLK
- select ARCH_USES_GETTIMEOFFSET
help
This enables support for systems based on the Atmel AT91RM9200,
AT91SAM9 and AT91CAP9 processors.
ACTLR register. Note that setting specific bits in the ACTLR register
may not be available in non-secure mode.
+config ARM_ERRATA_742230
+ bool "ARM errata: DMB operation may be faulty"
+ depends on CPU_V7 && SMP
+ help
+ This option enables the workaround for the 742230 Cortex-A9
+ (r1p0..r2p2) erratum. Under rare circumstances, a DMB instruction
+ between two write operations may not ensure the correct visibility
+ ordering of the two writes. This workaround sets a specific bit in
+ the diagnostic register of the Cortex-A9 which causes the DMB
+ instruction to behave as a DSB, ensuring the correct behaviour of
+ the two writes.
+
+config ARM_ERRATA_742231
+ bool "ARM errata: Incorrect hazard handling in the SCU may lead to data corruption"
+ depends on CPU_V7 && SMP
+ help
+ This option enables the workaround for the 742231 Cortex-A9
+ (r2p0..r2p2) erratum. Under certain conditions, specific to the
+ Cortex-A9 MPCore micro-architecture, two CPUs working in SMP mode,
+ accessing some data located in the same cache line, may get corrupted
+ data due to bad handling of the address hazard when the line gets
+ replaced from one of the CPUs at the same time as another CPU is
+ accessing it. This workaround sets specific bits in the diagnostic
+ register of the Cortex-A9 which reduces the linefill issuing
+ capabilities of the processor.
+
config PL310_ERRATA_588369
bool "Clean & Invalidate maintenance operations do not invalidate clean lines"
depends on CACHE_L2X0 && ARCH_OMAP4
invalidated are not, resulting in an incoherency in the system page
tables. The workaround changes the TLB flushing routines to invalidate
entries regardless of the ASID.
+
+config ARM_ERRATA_743622
+ bool "ARM errata: Faulty hazard checking in the Store Buffer may lead to data corruption"
+ depends on CPU_V7
+ help
+ This option enables the workaround for the 743622 Cortex-A9
+ (r2p0..r2p2) erratum. Under very rare conditions, a faulty
+ optimisation in the Cortex-A9 Store Buffer may lead to data
+ corruption. This workaround sets a specific bit in the diagnostic
+ register of the Cortex-A9 which disables the Store Buffer
+ optimisation, preventing the defect from occurring. This has no
+ visible impact on the overall performance or power consumption of the
+ processor.
+
endmenu
source "arch/arm/common/Kconfig"
$(obj)/font.c: $(FONTC)
$(call cmd,shipped)
-$(obj)/vmlinux.lds: $(obj)/vmlinux.lds.in arch/arm/boot/Makefile .config
+$(obj)/vmlinux.lds: $(obj)/vmlinux.lds.in arch/arm/boot/Makefile $(KCONFIG_CONFIG)
@sed "$(SEDFLAGS)" < $< > $@
((dma_addr + size - PHYS_OFFSET) >= SZ_64M);
}
+int dma_set_coherent_mask(struct device *dev, u64 mask)
+{
+ if (mask >= PHYS_OFFSET + SZ_64M - 1)
+ return 0;
+
+ return -EIO;
+}
+
int __init it8152_pci_setup(int nr, struct pci_sys_data *sys)
{
it8152_io.start = IT8152_IO_BASE + 0x12000;
#ifdef CONFIG_ARM_DMA_MEM_BUFFERABLE
#define pgprot_dmacoherent(prot) \
__pgprot_modify(prot, L_PTE_MT_MASK|L_PTE_EXEC, L_PTE_MT_BUFFERABLE)
+#define __HAVE_PHYS_MEM_ACCESS_PROT
+struct file;
+extern pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn,
+ unsigned long size, pgprot_t vma_prot);
#else
#define pgprot_dmacoherent(prot) \
__pgprot_modify(prot, L_PTE_MT_MASK|L_PTE_EXEC, L_PTE_MT_UNCACHED)
beq no_work_pending
mov r0, sp @ 'regs'
mov r2, why @ 'syscall'
+ tst r1, #_TIF_SIGPENDING @ delivering a signal?
+ movne why, #0 @ prevent further restarts
bl do_notify_resume
b ret_slow_syscall @ Check work again
{
/*
* MSR : cccc 0011 0x10 xxxx xxxx xxxx xxxx xxxx
- * Undef : cccc 0011 0x00 xxxx xxxx xxxx xxxx xxxx
+ * Undef : cccc 0011 0100 xxxx xxxx xxxx xxxx xxxx
* ALU op with S bit and Rd == 15 :
* cccc 001x xxx1 xxxx 1111 xxxx xxxx xxxx
*/
- if ((insn & 0x0f900000) == 0x03200000 || /* MSR & Undef */
+ if ((insn & 0x0fb00000) == 0x03200000 || /* MSR */
+ (insn & 0x0ff00000) == 0x03400000 || /* Undef */
(insn & 0x0e10f000) == 0x0210f000) /* ALU s-bit, R15 */
return INSN_REJECTED;
* *S (bit 20) updates condition codes
* ADC/SBC/RSC reads the C flag
*/
- insn &= 0xfff00fff; /* Rn = r0, Rd = r0 */
+ insn &= 0xffff0fff; /* Rd = r0 */
asi->insn[0] = insn;
asi->insn_handler = (insn & (1 << 20)) ? /* S-bit */
emulate_alu_imm_rwflags : emulate_alu_imm_rflags;
.sda_is_open_drain = 1,
.scl_pin = AT91_PIN_PA21,
.scl_is_open_drain = 1,
- .udelay = 2, /* ~100 kHz */
+ .udelay = 5, /* ~100 kHz */
};
static struct platform_device at91sam9g45_twi0_device = {
.sda_is_open_drain = 1,
.scl_pin = AT91_PIN_PB11,
.scl_is_open_drain = 1,
- .udelay = 2, /* ~100 kHz */
+ .udelay = 5, /* ~100 kHz */
};
static struct platform_device at91sam9g45_twi1_device = {
static inline void arch_idle(void)
{
-#ifndef CONFIG_DEBUG_KERNEL
/*
* Disable the processor clock. The processor will be automatically
* re-enabled by an interrupt or by a reset.
*/
at91_sys_write(AT91_PMC_SCDR, AT91_PMC_PCK);
-#else
+#ifndef CONFIG_CPU_ARM920T
/*
* Set the processor (CP15) into 'Wait for Interrupt' mode.
- * Unlike disabling the processor clock via the PMC (above)
- * this allows the processor to be woken via JTAG.
+ * Post-RM9200 processors need this in conjunction with the above
+ * to save power when idle.
*/
cpu_do_idle();
#endif
.virtual = SRAM_VIRT,
.pfn = __phys_to_pfn(0x00010000),
.length = SZ_32K,
- /* MT_MEMORY_NONCACHED requires supersection alignment */
- .type = MT_DEVICE,
+ .type = MT_MEMORY_NONCACHED,
},
};
.virtual = SRAM_VIRT,
.pfn = __phys_to_pfn(0x00010000),
.length = SZ_32K,
- /* MT_MEMORY_NONCACHED requires supersection alignment */
- .type = MT_DEVICE,
+ .type = MT_MEMORY_NONCACHED,
},
};
.virtual = SRAM_VIRT,
.pfn = __phys_to_pfn(0x00008000),
.length = SZ_16K,
- /* MT_MEMORY_NONCACHED requires supersection alignment */
- .type = MT_DEVICE,
+ .type = MT_MEMORY_NONCACHED,
},
};
.virtual = SRAM_VIRT,
.pfn = __phys_to_pfn(0x00010000),
.length = SZ_32K,
- /* MT_MEMORY_NONCACHED requires supersection alignment */
- .type = MT_DEVICE,
+ .type = MT_MEMORY_NONCACHED,
},
};
#define IO_SPACE_LIMIT 0xffffffff
-#define __io(a) ((void __iomem *)(((a) - DOVE_PCIE0_IO_PHYS_BASE) +\
- DOVE_PCIE0_IO_VIRT_BASE))
-#define __mem_pci(a) (a)
+#define __io(a) ((void __iomem *)(((a) - DOVE_PCIE0_IO_BUS_BASE) + \
+ DOVE_PCIE0_IO_VIRT_BASE))
+#define __mem_pci(a) (a)
#endif
v &= ~(M2P_CONTROL_STALL_IRQ_EN | M2P_CONTROL_NFB_IRQ_EN);
m2p_set_control(ch, v);
- while (m2p_channel_state(ch) == STATE_ON)
+ while (m2p_channel_state(ch) >= STATE_ON)
cpu_relax();
m2p_set_control(ch, 0x0);
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_MXC_NAND
+ select MXC_ULPI if USB_ULPI
help
Include support for Eukrea CPUIMX27 platform. This includes
specific configurations for the module and its peripherals.
i2c_register_board_info(0, eukrea_cpuimx27_i2c_devices,
ARRAY_SIZE(eukrea_cpuimx27_i2c_devices));
- imx27_add_i2c_imx1(&cpuimx27_i2c1_data);
+ imx27_add_i2c_imx0(&cpuimx27_i2c1_data);
platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
return pci_scan_bus(sys->busnr, &ixp4xx_ops, sys);
}
+int dma_set_coherent_mask(struct device *dev, u64 mask)
+{
+ if (mask >= SZ_64M - 1)
+ return 0;
+
+ return -EIO;
+}
+
EXPORT_SYMBOL(ixp4xx_pci_read);
EXPORT_SYMBOL(ixp4xx_pci_write);
#define PCIBIOS_MAX_MEM 0x4BFFFFFF
#endif
+#define ARCH_HAS_DMA_SET_COHERENT_MASK
+
#define pcibios_assign_all_busses() 1
/* Register locations and bits */
#define KIRKWOOD_PCIE1_IO_PHYS_BASE 0xf3000000
#define KIRKWOOD_PCIE1_IO_VIRT_BASE 0xfef00000
-#define KIRKWOOD_PCIE1_IO_BUS_BASE 0x00000000
+#define KIRKWOOD_PCIE1_IO_BUS_BASE 0x00100000
#define KIRKWOOD_PCIE1_IO_SIZE SZ_1M
#define KIRKWOOD_PCIE_IO_PHYS_BASE 0xf2000000
* IORESOURCE_IO
*/
pp->res[0].name = "PCIe 0 I/O Space";
- pp->res[0].start = KIRKWOOD_PCIE_IO_PHYS_BASE;
+ pp->res[0].start = KIRKWOOD_PCIE_IO_BUS_BASE;
pp->res[0].end = pp->res[0].start + KIRKWOOD_PCIE_IO_SIZE - 1;
pp->res[0].flags = IORESOURCE_IO;
* IORESOURCE_IO
*/
pp->res[0].name = "PCIe 1 I/O Space";
- pp->res[0].start = KIRKWOOD_PCIE1_IO_PHYS_BASE;
+ pp->res[0].start = KIRKWOOD_PCIE1_IO_BUS_BASE;
pp->res[0].end = pp->res[0].start + KIRKWOOD_PCIE1_IO_SIZE - 1;
pp->res[0].flags = IORESOURCE_IO;
#ifndef __ASM_MACH_SYSTEM_H
#define __ASM_MACH_SYSTEM_H
+#include <mach/cputype.h>
+
static inline void arch_idle(void)
{
cpu_do_idle();
static inline void arch_reset(char mode, const char *cmd)
{
- cpu_reset(0);
+ if (cpu_is_pxa168())
+ cpu_reset(0xffff0000);
+ else
+ cpu_reset(0);
}
#endif /* __ASM_MACH_SYSTEM_H */
freqs.cpu = policy->cpu;
if (freq_debug)
- pr_debug(KERN_INFO "Changing CPU frequency to %d Mhz, "
- "(SDRAM %d Mhz)\n",
+ pr_debug("Changing CPU frequency to %d Mhz, (SDRAM %d Mhz)\n",
freqs.new / 1000, (pxa_freq_settings[idx].div2) ?
(new_freq_mem / 2000) : (new_freq_mem / 1000));
* <= 0x2 for pxa21x/pxa25x/pxa26x/pxa27x
* == 0x3 for pxa300/pxa310/pxa320
*/
+#if defined(CONFIG_PXA25x) || defined(CONFIG_PXA27x)
#define __cpu_is_pxa2xx(id) \
({ \
unsigned int _id = (id) >> 13 & 0x7; \
_id <= 0x2; \
})
+#else
+#define __cpu_is_pxa2xx(id) (0)
+#endif
+#ifdef CONFIG_PXA3xx
#define __cpu_is_pxa3xx(id) \
({ \
unsigned int _id = (id) >> 13 & 0x7; \
_id == 0x3; \
})
+#else
+#define __cpu_is_pxa3xx(id) (0)
+#endif
+#if defined(CONFIG_CPU_PXA930) || defined(CONFIG_CPU_PXA935)
#define __cpu_is_pxa93x(id) \
({ \
unsigned int _id = (id) >> 4 & 0xfff; \
_id == 0x683 || _id == 0x693; \
})
+#else
+#define __cpu_is_pxa93x(id) (0)
+#endif
#define cpu_is_pxa2xx() \
({ \
#define PCIBIOS_MIN_IO 0
#define PCIBIOS_MIN_MEM 0
#define pcibios_assign_all_busses() 1
+#define ARCH_HAS_DMA_SET_COHERENT_MASK
#endif
-
#endif /* _ASM_ARCH_HARDWARE_H */
#ifndef __ASM_ARM_ARCH_IO_H
#define __ASM_ARM_ARCH_IO_H
+#include <mach/hardware.h>
+
#define IO_SPACE_LIMIT 0xffffffff
/*
},
};
+static struct i2c_pxa_platform_data palm27x_i2c_power_info = {
+ .use_pio = 1,
+};
+
void __init palm27x_pmic_init(void)
{
i2c_register_board_info(1, ARRAY_AND_SIZE(palm27x_pi2c_board_info));
- pxa27x_set_i2c_power_info(NULL);
+ pxa27x_set_i2c_power_info(&palm27x_i2c_power_info);
}
#endif
#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
static struct pxamci_platform_data vpac270_mci_platform_data = {
.ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
+ .gpio_power = -1,
.gpio_card_detect = GPIO53_VPAC270_SD_DETECT_N,
.gpio_card_ro = GPIO52_VPAC270_SD_READONLY,
.detect_delay_ms = 200,
#include <linux/sysdev.h>
#include <linux/serial_core.h>
#include <linux/platform_device.h>
+#include <linux/sched.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <linux/sysdev.h>
#include <linux/serial_core.h>
#include <linux/platform_device.h>
+#include <linux/sched.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <linux/sysdev.h>
#include <linux/serial_core.h>
#include <linux/platform_device.h>
+#include <linux/sched.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
return s5p_gatectrl(S5P_CLKGATE_IP3, clk, enable);
}
-static int s5pv210_clk_ip4_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(S5P_CLKGATE_IP4, clk, enable);
-}
-
static int s5pv210_clk_mask0_ctrl(struct clk *clk, int enable)
{
return s5p_gatectrl(S5P_CLK_SRC_MASK0, clk, enable);
#include <linux/io.h>
#include <linux/sysdev.h>
#include <linux/platform_device.h>
+#include <linux/sched.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
extern int gpio_get_value(unsigned gpio);
extern void gpio_set_value(unsigned gpio, int value);
+#define gpio_get_value_cansleep gpio_get_value
+#define gpio_set_value_cansleep gpio_set_value
+
/* wrappers to sleep-enable the previous two functions */
static inline unsigned gpio_to_irq(unsigned gpio)
{
}
#if 0
-static void ct_ca9x4_timer_init(void)
+static void __init ct_ca9x4_timer_init(void)
{
writel(0, MMIO_P2V(CT_CA9X4_TIMER0) + TIMER_CTRL);
writel(0, MMIO_P2V(CT_CA9X4_TIMER1) + TIMER_CTRL);
.resource = pmu_resources,
};
-static void ct_ca9x4_init(void)
+static void __init ct_ca9x4_init(void)
{
int i;
#ifdef CONFIG_CACHE_L2X0
- l2x0_init(MMIO_P2V(CT_CA9X4_L2CC), 0x00000000, 0xfe0fffff);
+ void __iomem *l2x0_base = MMIO_P2V(CT_CA9X4_L2CC);
+
+ /* set RAM latencies to 1 cycle for this core tile. */
+ writel(0, l2x0_base + L2X0_TAG_LATENCY_CTRL);
+ writel(0, l2x0_base + L2X0_DATA_LATENCY_CTRL);
+
+ l2x0_init(l2x0_base, 0x00400000, 0xfe0fffff);
#endif
clkdev_add_table(lookups, ARRAY_SIZE(lookups));
}
-static void v2m_timer_init(void)
+static void __init v2m_timer_init(void)
{
writel(0, MMIO_P2V(V2M_TIMER0) + TIMER_CTRL);
writel(0, MMIO_P2V(V2M_TIMER1) + TIMER_CTRL);
if (ai_usermode & UM_SIGNAL)
force_sig(SIGBUS, current);
- else
- set_cr(cr_no_alignment);
+ else {
+ /*
+ * We're about to disable the alignment trap and return to
+ * user space. But if an interrupt occurs before actually
+ * reaching user space, then the IRQ vector entry code will
+ * notice that we were still in kernel space and therefore
+ * the alignment trap won't be re-enabled in that case as it
+ * is presumed to be always on from kernel space.
+ * Let's prevent that race by disabling interrupts here (they
+ * are disabled on the way back to user space anyway in
+ * entry-common.S) and disable the alignment trap only if
+ * there is no work pending for this thread.
+ */
+ raw_local_irq_disable();
+ if (!(current_thread_info()->flags & _TIF_WORK_MASK))
+ set_cr(cr_no_alignment);
+ }
return 0;
}
/*
* Don't allow RAM to be mapped - this causes problems with ARMv6+
*/
- if (WARN_ON(pfn_valid(pfn)))
- return NULL;
+ if (pfn_valid(pfn)) {
+ printk(KERN_WARNING "BUG: Your driver calls ioremap() on system memory. This leads\n"
+ KERN_WARNING "to architecturally unpredictable behaviour on ARMv6+, and ioremap()\n"
+ KERN_WARNING "will fail in the next kernel release. Please fix your driver.\n");
+ WARN_ON(1);
+ }
type = get_mem_type(mtype);
if (!type)
#include <linux/nodemask.h>
#include <linux/memblock.h>
#include <linux/sort.h>
+#include <linux/fs.h>
#include <asm/cputype.h>
#include <asm/sections.h>
.domain = DOMAIN_USER,
},
[MT_MEMORY] = {
+ .prot_pte = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY |
+ L_PTE_WRITE | L_PTE_EXEC,
+ .prot_l1 = PMD_TYPE_TABLE,
.prot_sect = PMD_TYPE_SECT | PMD_SECT_AP_WRITE,
.domain = DOMAIN_KERNEL,
},
.domain = DOMAIN_KERNEL,
},
[MT_MEMORY_NONCACHED] = {
+ .prot_pte = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY |
+ L_PTE_WRITE | L_PTE_EXEC | L_PTE_MT_BUFFERABLE,
+ .prot_l1 = PMD_TYPE_TABLE,
.prot_sect = PMD_TYPE_SECT | PMD_SECT_AP_WRITE,
.domain = DOMAIN_KERNEL,
},
* Enable CPU-specific coherency if supported.
* (Only available on XSC3 at the moment.)
*/
- if (arch_is_coherent() && cpu_is_xsc3())
+ if (arch_is_coherent() && cpu_is_xsc3()) {
mem_types[MT_MEMORY].prot_sect |= PMD_SECT_S;
-
+ mem_types[MT_MEMORY].prot_pte |= L_PTE_SHARED;
+ mem_types[MT_MEMORY_NONCACHED].prot_sect |= PMD_SECT_S;
+ mem_types[MT_MEMORY_NONCACHED].prot_pte |= L_PTE_SHARED;
+ }
/*
* ARMv6 and above have extended page tables.
*/
mem_types[MT_DEVICE_CACHED].prot_sect |= PMD_SECT_S;
mem_types[MT_DEVICE_CACHED].prot_pte |= L_PTE_SHARED;
mem_types[MT_MEMORY].prot_sect |= PMD_SECT_S;
+ mem_types[MT_MEMORY].prot_pte |= L_PTE_SHARED;
mem_types[MT_MEMORY_NONCACHED].prot_sect |= PMD_SECT_S;
+ mem_types[MT_MEMORY_NONCACHED].prot_pte |= L_PTE_SHARED;
#endif
}
mem_types[MT_LOW_VECTORS].prot_l1 |= ecc_mask;
mem_types[MT_HIGH_VECTORS].prot_l1 |= ecc_mask;
mem_types[MT_MEMORY].prot_sect |= ecc_mask | cp->pmd;
+ mem_types[MT_MEMORY].prot_pte |= kern_pgprot;
+ mem_types[MT_MEMORY_NONCACHED].prot_sect |= ecc_mask;
mem_types[MT_ROM].prot_sect |= cp->pmd;
switch (cp->pmd) {
}
}
+#ifdef CONFIG_ARM_DMA_MEM_BUFFERABLE
+pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn,
+ unsigned long size, pgprot_t vma_prot)
+{
+ if (!pfn_valid(pfn))
+ return pgprot_noncached(vma_prot);
+ else if (file->f_flags & O_SYNC)
+ return pgprot_writecombine(vma_prot);
+ return vma_prot;
+}
+EXPORT_SYMBOL(phys_mem_access_prot);
+#endif
+
#define vectors_base() (vectors_high() ? 0xffff0000 : 0)
static void __init *early_alloc(unsigned long sz)
* It is assumed that:
* - cache type register is implemented
*/
-__v7_setup:
+__v7_ca9mp_setup:
#ifdef CONFIG_SMP
mrc p15, 0, r0, c1, c0, 1
tst r0, #(1 << 6) @ SMP/nAMP mode enabled?
orreq r0, r0, #(1 << 6) | (1 << 0) @ Enable SMP/nAMP mode and
mcreq p15, 0, r0, c1, c0, 1 @ TLB ops broadcasting
#endif
+__v7_setup:
adr r12, __v7_setup_stack @ the local stack
stmia r12, {r0-r5, r7, r9, r11, lr}
bl v7_flush_dcache_all
mrc p15, 0, r0, c0, c0, 0 @ read main ID register
and r10, r0, #0xff000000 @ ARM?
teq r10, #0x41000000
- bne 2f
+ bne 3f
and r5, r0, #0x00f00000 @ variant
and r6, r0, #0x0000000f @ revision
- orr r0, r6, r5, lsr #20-4 @ combine variant and revision
+ orr r6, r6, r5, lsr #20-4 @ combine variant and revision
+ ubfx r0, r0, #4, #12 @ primary part number
+ /* Cortex-A8 Errata */
+ ldr r10, =0x00000c08 @ Cortex-A8 primary part number
+ teq r0, r10
+ bne 2f
#ifdef CONFIG_ARM_ERRATA_430973
teq r5, #0x00100000 @ only present in r1p*
mrceq p15, 0, r10, c1, c0, 1 @ read aux control register
mcreq p15, 0, r10, c1, c0, 1 @ write aux control register
#endif
#ifdef CONFIG_ARM_ERRATA_458693
- teq r0, #0x20 @ only present in r2p0
+ teq r6, #0x20 @ only present in r2p0
mrceq p15, 0, r10, c1, c0, 1 @ read aux control register
orreq r10, r10, #(1 << 5) @ set L1NEON to 1
orreq r10, r10, #(1 << 9) @ set PLDNOP to 1
mcreq p15, 0, r10, c1, c0, 1 @ write aux control register
#endif
#ifdef CONFIG_ARM_ERRATA_460075
- teq r0, #0x20 @ only present in r2p0
+ teq r6, #0x20 @ only present in r2p0
mrceq p15, 1, r10, c9, c0, 2 @ read L2 cache aux ctrl register
tsteq r10, #1 << 22
orreq r10, r10, #(1 << 22) @ set the Write Allocate disable bit
mcreq p15, 1, r10, c9, c0, 2 @ write the L2 cache aux ctrl register
#endif
+ b 3f
-2: mov r10, #0
+ /* Cortex-A9 Errata */
+2: ldr r10, =0x00000c09 @ Cortex-A9 primary part number
+ teq r0, r10
+ bne 3f
+#ifdef CONFIG_ARM_ERRATA_742230
+ cmp r6, #0x22 @ only present up to r2p2
+ mrcle p15, 0, r10, c15, c0, 1 @ read diagnostic register
+ orrle r10, r10, #1 << 4 @ set bit #4
+ mcrle p15, 0, r10, c15, c0, 1 @ write diagnostic register
+#endif
+#ifdef CONFIG_ARM_ERRATA_742231
+ teq r6, #0x20 @ present in r2p0
+ teqne r6, #0x21 @ present in r2p1
+ teqne r6, #0x22 @ present in r2p2
+ mrceq p15, 0, r10, c15, c0, 1 @ read diagnostic register
+ orreq r10, r10, #1 << 12 @ set bit #12
+ orreq r10, r10, #1 << 22 @ set bit #22
+ mcreq p15, 0, r10, c15, c0, 1 @ write diagnostic register
+#endif
+#ifdef CONFIG_ARM_ERRATA_743622
+ teq r6, #0x20 @ present in r2p0
+ teqne r6, #0x21 @ present in r2p1
+ teqne r6, #0x22 @ present in r2p2
+ mrceq p15, 0, r10, c15, c0, 1 @ read diagnostic register
+ orreq r10, r10, #1 << 6 @ set bit #6
+ mcreq p15, 0, r10, c15, c0, 1 @ write diagnostic register
+#endif
+
+3: mov r10, #0
#ifdef HARVARD_CACHE
mcr p15, 0, r10, c7, c5, 0 @ I+BTB cache invalidate
#endif
.section ".proc.info.init", #alloc, #execinstr
+ .type __v7_ca9mp_proc_info, #object
+__v7_ca9mp_proc_info:
+ .long 0x410fc090 @ Required ID value
+ .long 0xff0ffff0 @ Mask for ID
+ .long PMD_TYPE_SECT | \
+ PMD_SECT_AP_WRITE | \
+ PMD_SECT_AP_READ | \
+ PMD_FLAGS
+ .long PMD_TYPE_SECT | \
+ PMD_SECT_XN | \
+ PMD_SECT_AP_WRITE | \
+ PMD_SECT_AP_READ
+ b __v7_ca9mp_setup
+ .long cpu_arch_name
+ .long cpu_elf_name
+ .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP|HWCAP_TLS
+ .long cpu_v7_name
+ .long v7_processor_functions
+ .long v7wbi_tlb_fns
+ .long v6_user_fns
+ .long v7_cache_fns
+ .size __v7_ca9mp_proc_info, . - __v7_ca9mp_proc_info
+
/*
* Match any ARMv7 processor core.
*/
if (IS_ERR(pevent)) {
ret = PTR_ERR(pevent);
} else if (pevent->state != PERF_EVENT_STATE_ACTIVE) {
+ perf_event_release_kernel(pevent);
pr_warning("oprofile: failed to enable event %d "
"on CPU %d\n", event, cpu);
ret = -EBUSY;
ret = init_driverfs();
if (ret) {
kfree(counter_config);
+ counter_config = NULL;
return ret;
}
struct perf_event *event;
if (*perf_events) {
- exit_driverfs();
for_each_possible_cpu(cpu) {
for (id = 0; id < perf_num_counters; ++id) {
event = perf_events[cpu][id];
}
}
- if (counter_config)
+ if (counter_config) {
kfree(counter_config);
+ exit_driverfs();
+ }
}
#else
int __init oprofile_arch_init(struct oprofile_operations *ops)
/*
- * linux/arch/arm/mach-nomadik/timer.c
+ * linux/arch/arm/plat-nomadik/timer.c
*
* Copyright (C) 2008 STMicroelectronics
* Copyright (C) 2010 Alessandro Rubini
cr = readl(mtu_base + MTU_CR(1));
writel(0, mtu_base + MTU_LR(1));
writel(cr | MTU_CRn_ENA, mtu_base + MTU_CR(1));
- writel(0x2, mtu_base + MTU_IMSC);
+ writel(1 << 1, mtu_base + MTU_IMSC);
break;
case CLOCK_EVT_MODE_SHUTDOWN:
case CLOCK_EVT_MODE_UNUSED:
{
unsigned long rate;
struct clk *clk0;
- struct clk *clk1;
- u32 cr;
+ u32 cr = MTU_CRn_32BITS;
clk0 = clk_get_sys("mtu0", NULL);
BUG_ON(IS_ERR(clk0));
- clk1 = clk_get_sys("mtu1", NULL);
- BUG_ON(IS_ERR(clk1));
-
clk_enable(clk0);
- clk_enable(clk1);
/*
- * Tick rate is 2.4MHz for Nomadik and 110MHz for ux500:
- * use a divide-by-16 counter if it's more than 16MHz
+ * Tick rate is 2.4MHz for Nomadik and 2.4Mhz, 100MHz or 133 MHz
+ * for ux500.
+ * Use a divide-by-16 counter if the tick rate is more than 32MHz.
+ * At 32 MHz, the timer (with 32 bit counter) can be programmed
+ * to wake-up at a max 127s a head in time. Dividing a 2.4 MHz timer
+ * with 16 gives too low timer resolution.
*/
- cr = MTU_CRn_32BITS;;
rate = clk_get_rate(clk0);
- if (rate > 16 << 20) {
+ if (rate > 32000000) {
rate /= 16;
cr |= MTU_CRn_PRESCALE_16;
} else {
pr_err("timer: failed to initialize clock source %s\n",
nmdk_clksrc.name);
- /* Timer 1 is used for events, fix according to rate */
- cr = MTU_CRn_32BITS;
- rate = clk_get_rate(clk1);
- if (rate > 16 << 20) {
- rate /= 16;
- cr |= MTU_CRn_PRESCALE_16;
- } else {
- cr |= MTU_CRn_PRESCALE_1;
- }
+ /* Timer 1 is used for events */
+
clockevents_calc_mult_shift(&nmdk_clkevt, rate, MTU_MIN_RANGE);
writel(cr | MTU_CRn_ONESHOT, mtu_base + MTU_CR(1)); /* off, currently */
config OMAP_DEBUG_LEDS
bool
depends on OMAP_DEBUG_DEVICES
- default y if LEDS
+ default y if LEDS_CLASS
config OMAP_RESET_CLOCKS
bool "Reset unused clocks during boot"
if ((start <= da) && (da < start + bytes)) {
dev_dbg(obj->dev, "%s: %08x<=%08x(%x)\n",
__func__, start, da, bytes);
+ iotlb_load_cr(obj, &cr);
iommu_write_reg(obj, 1, MMU_FLUSH_ENTRY);
}
}
/* Writing zero to RSYNC_ERR clears the IRQ */
MCBSP_WRITE(mcbsp_rx, SPCR1, MCBSP_READ_CACHE(mcbsp_rx, SPCR1));
} else {
- complete(&mcbsp_rx->tx_irq_completion);
+ complete(&mcbsp_rx->rx_irq_completion);
}
return IRQ_HANDLED;
if (omap_sram_size == 0)
return;
- if (cpu_is_omap24xx()) {
- omap_sram_io_desc[0].virtual = OMAP2_SRAM_VA;
-
- base = OMAP2_SRAM_PA;
- base = ROUND_DOWN(base, PAGE_SIZE);
- omap_sram_io_desc[0].pfn = __phys_to_pfn(base);
- }
-
if (cpu_is_omap34xx()) {
- omap_sram_io_desc[0].virtual = OMAP3_SRAM_VA;
- base = OMAP3_SRAM_PA;
- base = ROUND_DOWN(base, PAGE_SIZE);
- omap_sram_io_desc[0].pfn = __phys_to_pfn(base);
-
/*
* SRAM must be marked as non-cached on OMAP3 since the
* CORE DPLL M2 divider change code (in SRAM) runs with the
omap_sram_io_desc[0].type = MT_MEMORY_NONCACHED;
}
- if (cpu_is_omap44xx()) {
- omap_sram_io_desc[0].virtual = OMAP4_SRAM_VA;
- base = OMAP4_SRAM_PA;
- base = ROUND_DOWN(base, PAGE_SIZE);
- omap_sram_io_desc[0].pfn = __phys_to_pfn(base);
- }
- omap_sram_io_desc[0].length = 1024 * 1024; /* Use section desc */
+ omap_sram_io_desc[0].virtual = omap_sram_base;
+ base = omap_sram_start;
+ base = ROUND_DOWN(base, PAGE_SIZE);
+ omap_sram_io_desc[0].pfn = __phys_to_pfn(base);
+ omap_sram_io_desc[0].length = ROUND_DOWN(omap_sram_size, PAGE_SIZE);
iotable_init(omap_sram_io_desc, ARRAY_SIZE(omap_sram_io_desc));
printk(KERN_INFO "SRAM: Mapped pa 0x%08lx to va 0x%08lx size: 0x%lx\n",
static int s3c_adc_resume(struct platform_device *pdev)
{
struct adc_device *adc = platform_get_drvdata(pdev);
- unsigned long flags;
clk_enable(adc->clk);
enable_irq(adc->irq);
#include <plat/clock.h>
#include <plat/cpu.h>
+#include <linux/serial_core.h>
+#include <plat/regs-serial.h> /* for s3c24xx_uart_devs */
+
/* clock information */
static LIST_HEAD(clocks);
return 0;
}
+static int dev_is_s3c_uart(struct device *dev)
+{
+ struct platform_device **pdev = s3c24xx_uart_devs;
+ int i;
+ for (i = 0; i < ARRAY_SIZE(s3c24xx_uart_devs); i++, pdev++)
+ if (*pdev && dev == &(*pdev)->dev)
+ return 1;
+ return 0;
+}
+
+/*
+ * Serial drivers call get_clock() very early, before platform bus
+ * has been set up, this requires a special check to let them get
+ * a proper clock
+ */
+
+static int dev_is_platform_device(struct device *dev)
+{
+ return dev->bus == &platform_bus_type ||
+ (dev->bus == NULL && dev_is_s3c_uart(dev));
+}
+
/* Clock API calls */
struct clk *clk_get(struct device *dev, const char *id)
struct clk *clk = ERR_PTR(-ENOENT);
int idno;
- if (dev == NULL || dev->bus != &platform_bus_type)
+ if (dev == NULL || !dev_is_platform_device(dev))
idno = -1;
else
idno = to_platform_device(dev)->id;
vfree(module->arch.syminfo);
module->arch.syminfo = NULL;
- return module_bug_finalize(hdr, sechdrs, module);
+ return 0;
}
void module_arch_cleanup(struct module *module)
{
- module_bug_cleanup(module);
}
struct user_context *user = current->thread.user;
unsigned long tbr, psr;
+ /* Always make any pending restarted system calls return -EINTR */
+ current_thread_info()->restart_block.fn = do_no_restart_syscall;
+
tbr = user->i.tbr;
psr = user->i.psr;
if (copy_from_user(user, &sc->sc_context, sizeof(sc->sc_context)))
struct sigframe __user *frame;
int rsig;
+ set_fs(USER_DS);
+
frame = get_sigframe(ka, sizeof(*frame));
if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
(unsigned long) (frame->retcode + 2));
}
- /* set up registers for signal handler */
- __frame->sp = (unsigned long) frame;
- __frame->lr = (unsigned long) &frame->retcode;
- __frame->gr8 = sig;
-
+ /* Set up registers for the signal handler */
if (current->personality & FDPIC_FUNCPTRS) {
struct fdpic_func_descriptor __user *funcptr =
(struct fdpic_func_descriptor __user *) ka->sa.sa_handler;
- __get_user(__frame->pc, &funcptr->text);
- __get_user(__frame->gr15, &funcptr->GOT);
+ struct fdpic_func_descriptor desc;
+ if (copy_from_user(&desc, funcptr, sizeof(desc)))
+ goto give_sigsegv;
+ __frame->pc = desc.text;
+ __frame->gr15 = desc.GOT;
} else {
__frame->pc = (unsigned long) ka->sa.sa_handler;
__frame->gr15 = 0;
}
- set_fs(USER_DS);
+ __frame->sp = (unsigned long) frame;
+ __frame->lr = (unsigned long) &frame->retcode;
+ __frame->gr8 = sig;
/* the tracer may want to single-step inside the handler */
if (test_thread_flag(TIF_SINGLESTEP))
return 0;
give_sigsegv:
- force_sig(SIGSEGV, current);
+ force_sigsegv(sig, current);
return -EFAULT;
} /* end setup_frame() */
struct rt_sigframe __user *frame;
int rsig;
+ set_fs(USER_DS);
+
frame = get_sigframe(ka, sizeof(*frame));
if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
}
/* Set up registers for signal handler */
- __frame->sp = (unsigned long) frame;
- __frame->lr = (unsigned long) &frame->retcode;
- __frame->gr8 = sig;
- __frame->gr9 = (unsigned long) &frame->info;
-
if (current->personality & FDPIC_FUNCPTRS) {
struct fdpic_func_descriptor __user *funcptr =
(struct fdpic_func_descriptor __user *) ka->sa.sa_handler;
- __get_user(__frame->pc, &funcptr->text);
- __get_user(__frame->gr15, &funcptr->GOT);
+ struct fdpic_func_descriptor desc;
+ if (copy_from_user(&desc, funcptr, sizeof(desc)))
+ goto give_sigsegv;
+ __frame->pc = desc.text;
+ __frame->gr15 = desc.GOT;
} else {
__frame->pc = (unsigned long) ka->sa.sa_handler;
__frame->gr15 = 0;
}
- set_fs(USER_DS);
+ __frame->sp = (unsigned long) frame;
+ __frame->lr = (unsigned long) &frame->retcode;
+ __frame->gr8 = sig;
+ __frame->gr9 = (unsigned long) &frame->info;
/* the tracer may want to single-step inside the handler */
if (test_thread_flag(TIF_SINGLESTEP))
return 0;
give_sigsegv:
- force_sig(SIGSEGV, current);
+ force_sigsegv(sig, current);
return -EFAULT;
} /* end setup_rt_frame() */
int ret;
/* Are we from a system call? */
- if (in_syscall(__frame)) {
+ if (__frame->syscallno != -1) {
/* If so, check system call restarting.. */
switch (__frame->gr8) {
case -ERESTART_RESTARTBLOCK:
__frame->gr8 = __frame->orig_gr8;
__frame->pc -= 4;
}
+ __frame->syscallno = -1;
}
/* Set up the stack frame */
break;
case -ERESTART_RESTARTBLOCK:
- __frame->gr8 = __NR_restart_syscall;
+ __frame->gr7 = __NR_restart_syscall;
__frame->pc -= 4;
break;
}
+ __frame->syscallno = -1;
}
/* if there's no signal to deliver, we just put the saved sigmask
const Elf_Shdr *sechdrs,
struct module *me)
{
- return module_bug_finalize(hdr, sechdrs, me);
+ return 0;
}
void module_arch_cleanup(struct module *mod)
{
- module_bug_cleanup(mod);
}
* These are used to set parameters in the core dumps.
*/
#define ELF_CLASS ELFCLASS32
-#if defined(__LITTLE_ENDIAN)
+#if defined(__LITTLE_ENDIAN__)
#define ELF_DATA ELFDATA2LSB
-#elif defined(__BIG_ENDIAN)
+#elif defined(__BIG_ENDIAN__)
#define ELF_DATA ELFDATA2MSB
#else
#error no endian defined
#undef __HAVE_ARCH_SIG_BITOPS
struct pt_regs;
-extern int do_signal(struct pt_regs *regs, sigset_t *oldset);
#define ptrace_signal_deliver(regs, cookie) do { } while (0)
#define __ARCH_WANT_SYS_OLD_GETRLIMIT /*will be unused*/
#define __ARCH_WANT_SYS_OLDUMOUNT
#define __ARCH_WANT_SYS_RT_SIGACTION
+#define __ARCH_WANT_SYS_RT_SIGSUSPEND
#define __IGNORE_lchown
#define __IGNORE_setuid
--- /dev/null
+vmlinux.lds
work_notifysig: ; deal with pending signals and
; notify-resume requests
mv r0, sp ; arg1 : struct pt_regs *regs
- ldi r1, #0 ; arg2 : sigset_t *oldset
- mv r2, r9 ; arg3 : __u32 thread_info_flags
+ mv r1, r9 ; arg2 : __u32 thread_info_flags
bl do_notify_resume
- bra restore_all
+ bra resume_userspace
; perform syscall exit tracing
ALIGN
if (access_process_vm(child, pc&~3, &insn, sizeof(insn), 0)
!= sizeof(insn))
- break;
+ return -EIO;
compute_next_pc(insn, pc, &next_pc, child);
if (next_pc & 0x80000000)
- break;
+ return -EIO;
if (embed_debug_trap(child, next_pc))
- break;
+ return -EIO;
invalidate_cache();
+ return 0;
}
void user_disable_single_step(struct task_struct *child)
#define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP)))
-int do_signal(struct pt_regs *, sigset_t *);
-
-asmlinkage int
-sys_rt_sigsuspend(sigset_t __user *unewset, size_t sigsetsize,
- unsigned long r2, unsigned long r3, unsigned long r4,
- unsigned long r5, unsigned long r6, struct pt_regs *regs)
-{
- sigset_t newset;
-
- /* XXX: Don't preclude handling different sized sigset_t's. */
- if (sigsetsize != sizeof(sigset_t))
- return -EINVAL;
-
- if (copy_from_user(&newset, unewset, sizeof(newset)))
- return -EFAULT;
- sigdelsetmask(&newset, sigmask(SIGKILL)|sigmask(SIGSTOP));
-
- spin_lock_irq(¤t->sighand->siglock);
- current->saved_sigmask = current->blocked;
- current->blocked = newset;
- recalc_sigpending();
- spin_unlock_irq(¤t->sighand->siglock);
-
- current->state = TASK_INTERRUPTIBLE;
- schedule();
- set_thread_flag(TIF_RESTORE_SIGMASK);
- return -ERESTARTNOHAND;
-}
-
asmlinkage int
sys_sigaltstack(const stack_t __user *uss, stack_t __user *uoss,
unsigned long r2, unsigned long r3, unsigned long r4,
return (void __user *)((sp - frame_size) & -8ul);
}
-static void setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
+static int setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
sigset_t *set, struct pt_regs *regs)
{
struct rt_sigframe __user *frame;
current->comm, current->pid, frame, regs->pc);
#endif
- return;
+ return 0;
give_sigsegv:
force_sigsegv(sig, current);
+ return -EFAULT;
+}
+
+static int prev_insn(struct pt_regs *regs)
+{
+ u16 inst;
+ if (get_user(inst, (u16 __user *)(regs->bpc - 2)))
+ return -EFAULT;
+ if ((inst & 0xfff0) == 0x10f0) /* trap ? */
+ regs->bpc -= 2;
+ else
+ regs->bpc -= 4;
+ regs->syscall_nr = -1;
+ return 0;
}
/*
* OK, we're invoking a handler
*/
-static void
+static int
handle_signal(unsigned long sig, struct k_sigaction *ka, siginfo_t *info,
sigset_t *oldset, struct pt_regs *regs)
{
- unsigned short inst;
-
/* Are we from a system call? */
if (regs->syscall_nr >= 0) {
/* If so, check system call restarting.. */
/* fallthrough */
case -ERESTARTNOINTR:
regs->r0 = regs->orig_r0;
- inst = *(unsigned short *)(regs->bpc - 2);
- if ((inst & 0xfff0) == 0x10f0) /* trap ? */
- regs->bpc -= 2;
- else
- regs->bpc -= 4;
+ if (prev_insn(regs) < 0)
+ return -EFAULT;
}
}
/* Set up the stack frame */
- setup_rt_frame(sig, ka, info, oldset, regs);
+ if (setup_rt_frame(sig, ka, info, oldset, regs))
+ return -EFAULT;
spin_lock_irq(¤t->sighand->siglock);
sigorsets(¤t->blocked,¤t->blocked,&ka->sa.sa_mask);
sigaddset(¤t->blocked,sig);
recalc_sigpending();
spin_unlock_irq(¤t->sighand->siglock);
+ return 0;
}
/*
* want to handle. Thus you cannot kill init even with a SIGKILL even by
* mistake.
*/
-int do_signal(struct pt_regs *regs, sigset_t *oldset)
+static void do_signal(struct pt_regs *regs)
{
siginfo_t info;
int signr;
struct k_sigaction ka;
- unsigned short inst;
+ sigset_t *oldset;
/*
* We want the common case to go fast, which
* if so.
*/
if (!user_mode(regs))
- return 1;
+ return;
if (try_to_freeze())
goto no_signal;
- if (!oldset)
+ if (test_thread_flag(TIF_RESTORE_SIGMASK))
+ oldset = ¤t->saved_sigmask;
+ else
oldset = ¤t->blocked;
signr = get_signal_to_deliver(&info, &ka, regs, NULL);
*/
/* Whee! Actually deliver the signal. */
- handle_signal(signr, &ka, &info, oldset, regs);
- return 1;
+ if (handle_signal(signr, &ka, &info, oldset, regs) == 0)
+ clear_thread_flag(TIF_RESTORE_SIGMASK);
+
+ return;
}
no_signal:
regs->r0 == -ERESTARTSYS ||
regs->r0 == -ERESTARTNOINTR) {
regs->r0 = regs->orig_r0;
- inst = *(unsigned short *)(regs->bpc - 2);
- if ((inst & 0xfff0) == 0x10f0) /* trap ? */
- regs->bpc -= 2;
- else
- regs->bpc -= 4;
- }
- if (regs->r0 == -ERESTART_RESTARTBLOCK){
+ prev_insn(regs);
+ } else if (regs->r0 == -ERESTART_RESTARTBLOCK){
regs->r0 = regs->orig_r0;
regs->r7 = __NR_restart_syscall;
- inst = *(unsigned short *)(regs->bpc - 2);
- if ((inst & 0xfff0) == 0x10f0) /* trap ? */
- regs->bpc -= 2;
- else
- regs->bpc -= 4;
+ prev_insn(regs);
}
}
- return 0;
+ if (test_thread_flag(TIF_RESTORE_SIGMASK)) {
+ clear_thread_flag(TIF_RESTORE_SIGMASK);
+ sigprocmask(SIG_SETMASK, ¤t->saved_sigmask, NULL);
+ }
}
/*
* notification of userspace execution resumption
* - triggered by current->work.notify_resume
*/
-void do_notify_resume(struct pt_regs *regs, sigset_t *oldset,
- __u32 thread_info_flags)
+void do_notify_resume(struct pt_regs *regs, __u32 thread_info_flags)
{
/* Pending single-step? */
if (thread_info_flags & _TIF_SINGLESTEP)
/* deal with pending signal delivery */
if (thread_info_flags & _TIF_SIGPENDING)
- do_signal(regs,oldset);
+ do_signal(regs);
if (thread_info_flags & _TIF_NOTIFY_RESUME) {
clear_thread_flag(TIF_NOTIFY_RESUME);
void mac_mksound( unsigned int freq, unsigned int length )
{
__u32 cfreq = ( freq << 5 ) / 468;
- __u32 flags;
+ unsigned long flags;
int i;
if ( mac_special_bell == NULL )
*/
static void mac_quadra_start_bell( unsigned int freq, unsigned int length, unsigned int volume )
{
- __u32 flags;
+ unsigned long flags;
/* if the bell is already ringing, ring longer */
if ( mac_bell_duration > 0 )
static void mac_quadra_ring_bell( unsigned long ignored )
{
int i, count = mac_asc_samplespersec / HZ;
- __u32 flags;
+ unsigned long flags;
/*
* we neither want a sound buffer overflow nor underflow, so we need to match
include arch/mips/Kbuild.platforms
obj-y := $(platform-y)
+# make clean traverses $(obj-) without having included .config, so
+# everything ends up here
+obj- := $(platform-)
+
# mips object files
# The object files are linked as core-y files would be linked
select HAVE_KPROBES
select HAVE_KRETPROBES
select RTC_LIB if !MACH_LOONGSON
+ select GENERIC_ATOMIC64 if !64BIT
mainmenu "Linux/MIPS Kernel Configuration"
config GENERIC_ISA_DMA
bool
select ZONE_DMA if GENERIC_ISA_DMA_SUPPORT_BROKEN=n
+ select ISA_DMA_API
config GENERIC_ISA_DMA_SUPPORT_BROKEN
bool
select GENERIC_ISA_DMA
+config ISA_DMA_API
+ bool
+
config GENERIC_GPIO
bool
select SYS_SUPPORTS_SMP
select SMP_UP
help
- This is a kernel model which is also known a VSMP or lately
- has been marketesed into SMVP.
+ This is a kernel model which is known a VSMP but lately has been
+ marketesed into SMVP.
+ Virtual SMP uses the processor's VPEs to implement virtual
+ processors. In currently available configuration of the 34K processor
+ this allows for a dual processor. Both processors will share the same
+ primary caches; each will obtain the half of the TLB for it's own
+ exclusive use. For a layman this model can be described as similar to
+ what Intel calls Hyperthreading.
+
+ For further information see http://www.linux-mips.org/wiki/34K#VSMP
config MIPS_MT_SMTC
bool "SMTC: Use all TCs on all VPEs for SMP"
help
This is a kernel model which is known a SMTC or lately has been
marketesed into SMVP.
+ is presenting the available TC's of the core as processors to Linux.
+ On currently available 34K processors this means a Linux system will
+ see up to 5 processors. The implementation of the SMTC kernel differs
+ significantly from VSMP and cannot efficiently coexist in the same
+ kernel binary so the choice between VSMP and SMTC is a compile time
+ decision.
+
+ For further information see http://www.linux-mips.org/wiki/34K#SMTC
endchoice
char **prom_argv;
char **prom_envp;
-void prom_init_cmdline(void)
+void __init prom_init_cmdline(void)
{
int i;
}
}
-int prom_get_ethernet_addr(char *ethernet_addr)
+int __init prom_get_ethernet_addr(char *ethernet_addr)
{
char *ethaddr_str;
return 0;
}
-EXPORT_SYMBOL(prom_get_ethernet_addr);
void __init prom_free_prom_memory(void)
{
hostprogs-y := calc_vmlinuz_load_addr
VMLINUZ_LOAD_ADDRESS = $(shell $(obj)/calc_vmlinuz_load_addr \
- $(objtree)/$(KBUILD_IMAGE) $(VMLINUX_LOAD_ADDRESS))
+ $(obj)/vmlinux.bin $(VMLINUX_LOAD_ADDRESS))
vmlinuzobjs-y += $(obj)/piggy.o
vmlinuz.srec: vmlinuz
$(call cmd,objcopy)
-clean-files := $(objtree)/vmlinuz.*
+clean-files := $(objtree)/vmlinuz $(objtree)/vmlinuz.{32,ecoff,bin,srec}
def_bool y
select SPARSEMEM_STATIC
depends on CPU_CAVIUM_OCTEON
+
+config CAVIUM_OCTEON_HELPER
+ def_bool y
+ depends on OCTEON_ETHERNET || PCI
return NOTIFY_OK; /* Let default notifier send signals */
}
-static int cnmips_cu2_setup(void)
+static int __init cnmips_cu2_setup(void)
{
return cu2_notifier(cnmips_cu2_call, 0);
}
obj-y += cvmx-bootmem.o cvmx-l2c.o cvmx-sysinfo.o octeon-model.o
-obj-$(CONFIG_PCI) += cvmx-helper-errata.o cvmx-helper-jtag.o
+obj-$(CONFIG_CAVIUM_OCTEON_HELPER) += cvmx-helper-errata.o cvmx-helper-jtag.o
#
# DECstation family
#
-platform-$(CONFIG_MACH_DECSTATION) = dec/
+platform-$(CONFIG_MACH_DECSTATION) += dec/
cflags-$(CONFIG_MACH_DECSTATION) += \
-I$(srctree)/arch/mips/include/asm/mach-dec
libs-$(CONFIG_MACH_DECSTATION) += arch/mips/dec/prom/
*/
#define atomic64_add_negative(i, v) (atomic64_add_return(i, (v)) < 0)
+#else /* !CONFIG_64BIT */
+
+#include <asm-generic/atomic64.h>
+
#endif /* CONFIG_64BIT */
/*
#define cu2_notifier(fn, pri) \
({ \
- static struct notifier_block fn##_nb __cpuinitdata = { \
+ static struct notifier_block fn##_nb = { \
.notifier_call = fn, \
.priority = pri \
}; \
*/
#ifdef CONFIG_32BIT
+#include <linux/types.h>
struct flock {
short l_type;
*/
struct gic_intr_map {
unsigned int cpunum; /* Directed to this CPU */
+#define GIC_UNUSED 0xdead /* Dummy data */
unsigned int pin; /* Directed to this Pin */
unsigned int polarity; /* Polarity : +/- */
unsigned int trigtype; /* Trigger : Edge/Levl */
#ifndef __ASM_MACH_TX49XX_KMALLOC_H
#define __ASM_MACH_TX49XX_KMALLOC_H
-#define ARCH_KMALLOC_MINALIGN L1_CACHE_BYTES
+#define ARCH_DMA_MINALIGN L1_CACHE_BYTES
#endif /* __ASM_MACH_TX49XX_KMALLOC_H */
#define GIC_EXT_INTR(x) x
-/* Dummy data */
-#define X 0xdead
-
/* External Interrupts used for IPI */
#define GIC_IPI_EXT_INTR_RESCHED_VPE0 16
#define GIC_IPI_EXT_INTR_CALLFNC_VPE0 17
((unsigned long)(x) - PAGE_OFFSET + PHYS_OFFSET)
#endif
#define __va(x) ((void *)((unsigned long)(x) + PAGE_OFFSET - PHYS_OFFSET))
+
+/*
+ * RELOC_HIDE was originally added by 6007b903dfe5f1d13e0c711ac2894bdd4a61b1ad
+ * (lmo) rsp. 8431fd094d625b94d364fe393076ccef88e6ce18 (kernel.org). The
+ * discussion can be found in lkml posting
+ * <a2ebde260608230500o3407b108hc03debb9da6e62c@mail.gmail.com> which is
+ * archived at http://lists.linuxcoding.com/kernel/2006-q3/msg17360.html
+ *
+ * It is unclear if the misscompilations mentioned in
+ * http://lkml.org/lkml/2010/8/8/138 also affect MIPS so we keep this one
+ * until GCC 3.x has been retired before we can apply
+ * https://patchwork.linux-mips.org/patch/1541/
+ */
+
#define __pa_symbol(x) __pa(RELOC_HIDE((unsigned long)(x), 0))
#define pfn_to_kaddr(pfn) __va((pfn) << PAGE_SHIFT)
#ifdef __ARCH_SI_TRAPNO
int _trapno; /* TRAP # which caused the signal */
#endif
+ short _addr_lsb;
} _sigfault;
/* SIGPOLL, SIGXFSZ (To do ...) */
#define _TIF_LOAD_WATCH (1<<TIF_LOAD_WATCH)
/* work to do on interrupt/exception return */
-#define _TIF_WORK_MASK (0x0000ffef & ~_TIF_SECCOMP)
+#define _TIF_WORK_MASK (0x0000ffef & \
+ ~(_TIF_SECCOMP | _TIF_SYSCALL_AUDIT))
/* work to do on any return to u-space */
#define _TIF_ALLWORK_MASK (0x8000ffff & ~_TIF_SECCOMP)
#define __NR_perf_event_open (__NR_Linux + 333)
#define __NR_accept4 (__NR_Linux + 334)
#define __NR_recvmmsg (__NR_Linux + 335)
+#define __NR_fanotify_init (__NR_Linux + 336)
+#define __NR_fanotify_mark (__NR_Linux + 337)
+#define __NR_prlimit64 (__NR_Linux + 338)
/*
* Offset of the last Linux o32 flavoured syscall
*/
-#define __NR_Linux_syscalls 335
+#define __NR_Linux_syscalls 338
#endif /* _MIPS_SIM == _MIPS_SIM_ABI32 */
#define __NR_O32_Linux 4000
-#define __NR_O32_Linux_syscalls 335
+#define __NR_O32_Linux_syscalls 338
#if _MIPS_SIM == _MIPS_SIM_ABI64
#define __NR_perf_event_open (__NR_Linux + 292)
#define __NR_accept4 (__NR_Linux + 293)
#define __NR_recvmmsg (__NR_Linux + 294)
+#define __NR_fanotify_init (__NR_Linux + 295)
+#define __NR_fanotify_mark (__NR_Linux + 296)
+#define __NR_prlimit64 (__NR_Linux + 297)
/*
* Offset of the last Linux 64-bit flavoured syscall
*/
-#define __NR_Linux_syscalls 294
+#define __NR_Linux_syscalls 297
#endif /* _MIPS_SIM == _MIPS_SIM_ABI64 */
#define __NR_64_Linux 5000
-#define __NR_64_Linux_syscalls 294
+#define __NR_64_Linux_syscalls 297
#if _MIPS_SIM == _MIPS_SIM_NABI32
#define __NR_accept4 (__NR_Linux + 297)
#define __NR_recvmmsg (__NR_Linux + 298)
#define __NR_getdents64 (__NR_Linux + 299)
+#define __NR_fanotify_init (__NR_Linux + 300)
+#define __NR_fanotify_mark (__NR_Linux + 301)
+#define __NR_prlimit64 (__NR_Linux + 302)
/*
* Offset of the last N32 flavoured syscall
*/
-#define __NR_Linux_syscalls 299
+#define __NR_Linux_syscalls 302
#endif /* _MIPS_SIM == _MIPS_SIM_NABI32 */
#define __NR_N32_Linux 6000
-#define __NR_N32_Linux_syscalls 299
+#define __NR_N32_Linux_syscalls 302
#ifdef __KERNEL__
-core-$(CONFIG_MACH_JZ4740) += arch/mips/jz4740/
+platform-$(CONFIG_MACH_JZ4740) += jz4740/
cflags-$(CONFIG_MACH_JZ4740) += -I$(srctree)/arch/mips/include/asm/mach-jz4740
load-$(CONFIG_MACH_JZ4740) += 0xffffffff80010000
return -EFAULT;
}
- regs->regs[0] = 0;
switch (insn.i_format.opcode) {
/*
* jr and jalr are in r_format format.
#include <asm/io.h>
#include <asm/gic.h>
#include <asm/gcmpregs.h>
-#include <asm/mips-boards/maltaint.h>
#include <asm/irq.h>
#include <linux/hardirq.h>
#include <asm-generic/bitops/find.h>
int i;
irq -= _irqbase;
- pr_debug(KERN_DEBUG "%s(%d) called\n", __func__, irq);
+ pr_debug("%s(%d) called\n", __func__, irq);
cpumask_and(&tmp, cpumask, cpu_online_mask);
if (cpus_empty(tmp))
return -1;
/* Setup specifics */
for (i = 0; i < mapsize; i++) {
cpu = intrmap[i].cpunum;
- if (cpu == X)
+ if (cpu == GIC_UNUSED)
continue;
if (cpu == 0 && i != 0 && intrmap[i].flags == 0)
continue;
struct pt_regs *regs = args->regs;
int trap = (regs->cp0_cause & 0x7c) >> 2;
- /* Userpace events, ignore. */
+ /* Userspace events, ignore. */
if (user_mode(regs))
return NOTIFY_DONE;
memset(&tz, 0, sizeof(tz));
if ((ret.retval = sp_syscall(__NR_gettimeofday, (int)&tv,
(int)&tz, 0, 0)) == 0)
- ret.retval = tv.tv_sec;
+ ret.retval = tv.tv_sec;
break;
case MTSP_SYSCALL_EXIT:
{
return sys_lookup_dcookie(merge_64(a0, a1), buf, len);
}
+
+SYSCALL_DEFINE6(32_fanotify_mark, int, fanotify_fd, unsigned int, flags,
+ u64, a3, u64, a4, int, dfd, const char __user *, pathname)
+{
+ return sys_fanotify_mark(fanotify_fd, flags, merge_64(a3, a4),
+ dfd, pathname);
+}
{
/* do the secure computing check first */
if (!entryexit)
- secure_computing(regs->regs[0]);
+ secure_computing(regs->regs[2]);
if (unlikely(current->audit_context) && entryexit)
audit_syscall_exit(AUDITSC_RESULT(regs->regs[2]),
out:
if (unlikely(current->audit_context) && !entryexit)
- audit_syscall_entry(audit_arch(), regs->regs[0],
+ audit_syscall_entry(audit_arch(), regs->regs[2],
regs->regs[4], regs->regs[5],
regs->regs[6], regs->regs[7]);
}
sw t0, PT_R7(sp) # set error flag
beqz t0, 1f
+ lw t1, PT_R2(sp) # syscall number
negu v0 # error
- sw v0, PT_R0(sp) # set flag for syscall
- # restarting
+ sw t1, PT_R0(sp) # save it for syscall restarting
1: sw v0, PT_R2(sp) # result
o32_syscall_exit:
sw t0, PT_R7(sp) # set error flag
beqz t0, 1f
+ lw t1, PT_R2(sp) # syscall number
negu v0 # error
- sw v0, PT_R0(sp) # set flag for syscall
- # restarting
+ sw t1, PT_R0(sp) # save it for syscall restarting
1: sw v0, PT_R2(sp) # result
j syscall_exit
* We probably should handle this case a bit more drastic.
*/
bad_stack:
- negu v0 # error
- sw v0, PT_R0(sp)
+ li v0, EFAULT
sw v0, PT_R2(sp)
li t0, 1 # set error flag
sw t0, PT_R7(sp)
sys sys_rt_tgsigqueueinfo 4
sys sys_perf_event_open 5
sys sys_accept4 4
- sys sys_recvmmsg 5
+ sys sys_recvmmsg 5 /* 4335 */
+ sys sys_fanotify_init 2
+ sys sys_fanotify_mark 6
+ sys sys_prlimit64 4
.endm
/* We pre-compute the number of _instruction_ bytes needed to
sd t0, PT_R7(sp) # set error flag
beqz t0, 1f
+ ld t1, PT_R2(sp) # syscall number
dnegu v0 # error
- sd v0, PT_R0(sp) # set flag for syscall
- # restarting
+ sd t1, PT_R0(sp) # save it for syscall restarting
1: sd v0, PT_R2(sp) # result
n64_syscall_exit:
sd t0, PT_R7(sp) # set error flag
beqz t0, 1f
+ ld t1, PT_R2(sp) # syscall number
dnegu v0 # error
- sd v0, PT_R0(sp) # set flag for syscall restarting
+ sd t1, PT_R0(sp) # save it for syscall restarting
1: sd v0, PT_R2(sp) # result
j syscall_exit
PTR sys_pipe2
PTR sys_inotify_init1
PTR sys_preadv
- PTR sys_pwritev /* 5390 */
+ PTR sys_pwritev /* 5290 */
PTR sys_rt_tgsigqueueinfo
PTR sys_perf_event_open
PTR sys_accept4
- PTR sys_recvmmsg
+ PTR sys_recvmmsg
+ PTR sys_fanotify_init /* 5295 */
+ PTR sys_fanotify_mark
+ PTR sys_prlimit64
.size sys_call_table,.-sys_call_table
sd t0, PT_R7(sp) # set error flag
beqz t0, 1f
+ ld t1, PT_R2(sp) # syscall number
dnegu v0 # error
- sd v0, PT_R0(sp) # set flag for syscall restarting
+ sd t1, PT_R0(sp) # save it for syscall restarting
1: sd v0, PT_R2(sp) # result
local_irq_disable # make sure need_resched and
sd t0, PT_R7(sp) # set error flag
beqz t0, 1f
+ ld t1, PT_R2(sp) # syscall number
dnegu v0 # error
- sd v0, PT_R0(sp) # set flag for syscall restarting
+ sd t1, PT_R0(sp) # save it for syscall restarting
1: sd v0, PT_R2(sp) # result
j syscall_exit
PTR sys_cacheflush
PTR sys_cachectl
PTR sys_sysmips
- PTR sys_io_setup /* 6200 */
+ PTR compat_sys_io_setup /* 6200 */
PTR sys_io_destroy
- PTR sys_io_getevents
- PTR sys_io_submit
+ PTR compat_sys_io_getevents
+ PTR compat_sys_io_submit
PTR sys_io_cancel
PTR sys_exit_group /* 6205 */
PTR sys_lookup_dcookie
PTR sys_perf_event_open
PTR sys_accept4
PTR compat_sys_recvmmsg
- PTR sys_getdents
+ PTR sys_getdents64
+ PTR sys_fanotify_init /* 6300 */
+ PTR sys_fanotify_mark
+ PTR sys_prlimit64
.size sysn32_call_table,.-sysn32_call_table
sd t0, PT_R7(sp) # set error flag
beqz t0, 1f
+ ld t1, PT_R2(sp) # syscall number
dnegu v0 # error
- sd v0, PT_R0(sp) # flag for syscall restarting
+ sd t1, PT_R0(sp) # save it for syscall restarting
1: sd v0, PT_R2(sp) # result
o32_syscall_exit:
sd t0, PT_R7(sp) # set error flag
beqz t0, 1f
+ ld t1, PT_R2(sp) # syscall number
dnegu v0 # error
- sd v0, PT_R0(sp) # set flag for syscall restarting
+ sd t1, PT_R0(sp) # save it for syscall restarting
1: sd v0, PT_R2(sp) # result
j syscall_exit
* The stackpointer for a call with more than 4 arguments is bad.
*/
bad_stack:
- dnegu v0 # error
- sd v0, PT_R0(sp)
+ li v0, EFAULT
sd v0, PT_R2(sp)
li t0, 1 # set error flag
sd t0, PT_R7(sp)
PTR compat_sys_futex
PTR compat_sys_sched_setaffinity
PTR compat_sys_sched_getaffinity /* 4240 */
- PTR sys_io_setup
+ PTR compat_sys_io_setup
PTR sys_io_destroy
- PTR sys_io_getevents
- PTR sys_io_submit
+ PTR compat_sys_io_getevents
+ PTR compat_sys_io_submit
PTR sys_io_cancel /* 4245 */
PTR sys_exit_group
PTR sys32_lookup_dcookie
PTR compat_sys_rt_tgsigqueueinfo
PTR sys_perf_event_open
PTR sys_accept4
- PTR compat_sys_recvmmsg
+ PTR compat_sys_recvmmsg /* 4335 */
+ PTR sys_fanotify_init
+ PTR sys_32_fanotify_mark
+ PTR sys_prlimit64
.size sys_call_table,.-sys_call_table
{
struct rt_sigframe __user *frame;
sigset_t set;
- stack_t st;
int sig;
frame = (struct rt_sigframe __user *) regs.regs[29];
else if (sig)
force_sig(sig, current);
- if (__copy_from_user(&st, &frame->rs_uc.uc_stack, sizeof(st)))
- goto badframe;
/* It is more difficult to avoid calling this function than to
call it and ignore errors. */
- do_sigaltstack((stack_t __user *)&st, NULL, regs.regs[29]);
+ do_sigaltstack(&frame->rs_uc.uc_stack, NULL, regs.regs[29]);
/*
* Don't let your children do this ...
struct mips_abi *abi = current->thread.abi;
void *vdso = current->mm->context.vdso;
- switch(regs->regs[0]) {
- case ERESTART_RESTARTBLOCK:
- case ERESTARTNOHAND:
- regs->regs[2] = EINTR;
- break;
- case ERESTARTSYS:
- if (!(ka->sa.sa_flags & SA_RESTART)) {
+ if (regs->regs[0]) {
+ switch(regs->regs[2]) {
+ case ERESTART_RESTARTBLOCK:
+ case ERESTARTNOHAND:
regs->regs[2] = EINTR;
break;
+ case ERESTARTSYS:
+ if (!(ka->sa.sa_flags & SA_RESTART)) {
+ regs->regs[2] = EINTR;
+ break;
+ }
+ /* fallthrough */
+ case ERESTARTNOINTR:
+ regs->regs[7] = regs->regs[26];
+ regs->regs[2] = regs->regs[0];
+ regs->cp0_epc -= 4;
}
- /* fallthrough */
- case ERESTARTNOINTR: /* Userland will reload $v0. */
- regs->regs[7] = regs->regs[26];
- regs->cp0_epc -= 8;
- }
- regs->regs[0] = 0; /* Don't deal with this again. */
+ regs->regs[0] = 0; /* Don't deal with this again. */
+ }
if (sig_uses_siginfo(ka))
ret = abi->setup_rt_frame(vdso + abi->rt_signal_return_offset,
ret = abi->setup_frame(vdso + abi->signal_return_offset,
ka, regs, sig, oldset);
+ if (ret)
+ return ret;
+
spin_lock_irq(¤t->sighand->siglock);
sigorsets(¤t->blocked, ¤t->blocked, &ka->sa.sa_mask);
if (!(ka->sa.sa_flags & SA_NODEFER))
return;
}
- /*
- * Who's code doesn't conform to the restartable syscall convention
- * dies here!!! The li instruction, a single machine instruction,
- * must directly be followed by the syscall instruction.
- */
if (regs->regs[0]) {
if (regs->regs[2] == ERESTARTNOHAND ||
regs->regs[2] == ERESTARTSYS ||
regs->regs[2] == ERESTARTNOINTR) {
+ regs->regs[2] = regs->regs[0];
regs->regs[7] = regs->regs[26];
- regs->cp0_epc -= 8;
+ regs->cp0_epc -= 4;
}
if (regs->regs[2] == ERESTART_RESTARTBLOCK) {
regs->regs[2] = current->thread.abi->restart;
asmlinkage void sysn32_rt_sigreturn(nabi_no_regargs struct pt_regs regs)
{
struct rt_sigframe_n32 __user *frame;
+ mm_segment_t old_fs;
sigset_t set;
stack_t st;
s32 sp;
/* It is more difficult to avoid calling this function than to
call it and ignore errors. */
+ old_fs = get_fs();
+ set_fs(KERNEL_DS);
do_sigaltstack((stack_t __user *)&st, NULL, regs.regs[29]);
+ set_fs(old_fs);
+
/*
* Don't let your children do this ...
unsigned long value;
unsigned int res;
- regs->regs[0] = 0;
-
/*
* This load never faults.
*/
static gfp_t massage_gfp_flags(const struct device *dev, gfp_t gfp)
{
+ gfp_t dma_flag;
+
/* ignore region specifiers */
gfp &= ~(__GFP_DMA | __GFP_DMA32 | __GFP_HIGHMEM);
-#ifdef CONFIG_ZONE_DMA
+#ifdef CONFIG_ISA
if (dev == NULL)
- gfp |= __GFP_DMA;
- else if (dev->coherent_dma_mask < DMA_BIT_MASK(24))
- gfp |= __GFP_DMA;
+ dma_flag = __GFP_DMA;
else
#endif
-#ifdef CONFIG_ZONE_DMA32
+#if defined(CONFIG_ZONE_DMA32) && defined(CONFIG_ZONE_DMA)
if (dev->coherent_dma_mask < DMA_BIT_MASK(32))
- gfp |= __GFP_DMA32;
+ dma_flag = __GFP_DMA;
+ else if (dev->coherent_dma_mask < DMA_BIT_MASK(64))
+ dma_flag = __GFP_DMA32;
+ else
+#endif
+#if defined(CONFIG_ZONE_DMA32) && !defined(CONFIG_ZONE_DMA)
+ if (dev->coherent_dma_mask < DMA_BIT_MASK(64))
+ dma_flag = __GFP_DMA32;
+ else
+#endif
+#if defined(CONFIG_ZONE_DMA) && !defined(CONFIG_ZONE_DMA32)
+ if (dev->coherent_dma_mask < DMA_BIT_MASK(64))
+ dma_flag = __GFP_DMA;
else
#endif
- ;
+ dma_flag = 0;
/* Don't invoke OOM killer */
gfp |= __GFP_NORETRY;
- return gfp;
+ return gfp | dma_flag;
}
void *dma_alloc_noncoherent(struct device *dev, size_t size,
#define tc_lsize 32
extern unsigned long icache_way_size, dcache_way_size;
-unsigned long tcache_size;
+static unsigned long tcache_size;
#include <asm/r4kcache.h>
*/
#define GIC_CPU_NMI GIC_MAP_TO_NMI_MSK
+#define X GIC_UNUSED
+
static struct gic_intr_map gic_intr_map[GIC_NUM_INTRS] = {
{ X, X, X, X, 0 },
{ X, X, X, X, 0 },
{ X, X, X, X, 0 },
/* The remainder of this table is initialised by fill_ipi_map */
};
+#undef X
/*
* GCMP needs to be detected before any SMP initialisation
if (!((pcicvalue == PCIM_H_EA) ||
(pcicvalue == PCIM_H_IA_FIX) ||
(pcicvalue == PCIM_H_IA_RR))) {
- pr_err(KERN_ERR "PCI init error!!!\n");
+ pr_err("PCI init error!!!\n");
/* Not in Host Mode, return ERROR */
return -1;
}
*/
#include <linux/kernel.h>
+#include <asm/processor.h>
#include <asm/reboot.h>
#include <glb.h>
void pnx8550_machine_restart(char *command)
{
- char head[] = "************* Machine restart *************";
- char foot[] = "*******************************************";
-
- printk("\n\n");
- printk("%s\n", head);
- if (command != NULL)
- printk("* %s\n", command);
- printk("%s\n", foot);
-
PNX8550_RST_CTL = PNX8550_RST_DO_SW_RST;
}
void pnx8550_machine_halt(void)
{
- printk("*** Machine halt. (Not implemented) ***\n");
-}
-
-void pnx8550_machine_power_off(void)
-{
- printk("*** Machine power off. (Not implemented) ***\n");
+ while (1) {
+ if (cpu_wait)
+ cpu_wait();
+ }
}
extern void __init board_setup(void);
extern void pnx8550_machine_restart(char *);
extern void pnx8550_machine_halt(void);
-extern void pnx8550_machine_power_off(void);
extern struct resource ioport_resource;
extern struct resource iomem_resource;
extern char *prom_getcmdline(void);
_machine_restart = pnx8550_machine_restart;
_machine_halt = pnx8550_machine_halt;
- pm_power_off = pnx8550_machine_power_off;
+ pm_power_off = pnx8550_machine_halt;
/* Clear the Global 2 Register, PCI Inta Output Enable Registers
Bit 1:Enable DAC Powerdown
config MN10300
def_bool y
select HAVE_OPROFILE
- select HAVE_ARCH_TRACEHOOK
config AM33
def_bool y
choice
prompt "GDB stub port"
- default GDBSTUB_TTYSM0
+ default GDBSTUB_ON_TTYSM0
depends on GDBSTUB
help
Select the serial port used for GDB-stub.
#include <asm-generic/bitops/hweight.h>
#define ext2_set_bit_atomic(lock, nr, addr) \
- test_and_set_bit((nr) ^ 0x18, (addr))
+ test_and_set_bit((nr), (addr))
#define ext2_clear_bit_atomic(lock, nr, addr) \
- test_and_clear_bit((nr) ^ 0x18, (addr))
+ test_and_clear_bit((nr), (addr))
#include <asm-generic/bitops/ext2-non-atomic.h>
#include <asm-generic/bitops/minix-le.h>
/* These should not be considered constants from userland. */
#define SIGRTMIN 32
-#define SIGRTMAX (_NSIG-1)
+#define SIGRTMAX _NSIG
/*
* SA_FLAGS values:
const Elf_Shdr *sechdrs,
struct module *me)
{
- return module_bug_finalize(hdr, sechdrs, me);
+ return 0;
}
/*
*/
void module_arch_cleanup(struct module *mod)
{
- module_bug_cleanup(mod);
}
old_sigset_t mask;
if (verify_area(VERIFY_READ, act, sizeof(*act)) ||
__get_user(new_ka.sa.sa_handler, &act->sa_handler) ||
- __get_user(new_ka.sa.sa_restorer, &act->sa_restorer))
+ __get_user(new_ka.sa.sa_restorer, &act->sa_restorer) ||
+ __get_user(new_ka.sa.sa_flags, &act->sa_flags) ||
+ __get_user(mask, &act->sa_mask))
return -EFAULT;
- __get_user(new_ka.sa.sa_flags, &act->sa_flags);
- __get_user(mask, &act->sa_mask);
siginitset(&new_ka.sa.sa_mask, mask);
}
if (!ret && oact) {
if (verify_area(VERIFY_WRITE, oact, sizeof(*oact)) ||
__put_user(old_ka.sa.sa_handler, &oact->sa_handler) ||
- __put_user(old_ka.sa.sa_restorer, &oact->sa_restorer))
+ __put_user(old_ka.sa.sa_restorer, &oact->sa_restorer) ||
+ __put_user(old_ka.sa.sa_flags, &oact->sa_flags) ||
+ __put_user(old_ka.sa.sa_mask.sig[0], &oact->sa_mask))
return -EFAULT;
- __put_user(old_ka.sa.sa_flags, &oact->sa_flags);
- __put_user(old_ka.sa.sa_mask.sig[0], &oact->sa_mask);
}
return ret;
{
unsigned int err = 0;
+ /* Always make any pending restarted system calls return -EINTR */
+ current_thread_info()->restart_block.fn = do_no_restart_syscall;
+
if (is_using_fpu(current))
fpu_kill_state(current);
regs->d0 = sig;
regs->d1 = (unsigned long) &frame->sc;
- set_fs(USER_DS);
-
/* the tracer may want to single-step inside the handler */
if (test_thread_flag(TIF_SINGLESTEP))
ptrace_notify(SIGTRAP);
return 0;
give_sigsegv:
- force_sig(SIGSEGV, current);
+ force_sigsegv(sig, current);
return -EFAULT;
}
regs->d0 = sig;
regs->d1 = (long) &frame->info;
- set_fs(USER_DS);
-
/* the tracer may want to single-step inside the handler */
if (test_thread_flag(TIF_SINGLESTEP))
ptrace_notify(SIGTRAP);
return 0;
give_sigsegv:
- force_sig(SIGSEGV, current);
+ force_sigsegv(sig, current);
return -EFAULT;
}
+static inline void stepback(struct pt_regs *regs)
+{
+ regs->pc -= 2;
+ regs->orig_d0 = -1;
+}
+
/*
* handle the actual delivery of a signal to userspace
*/
/* fallthrough */
case -ERESTARTNOINTR:
regs->d0 = regs->orig_d0;
- regs->pc -= 2;
+ stepback(regs);
}
}
case -ERESTARTSYS:
case -ERESTARTNOINTR:
regs->d0 = regs->orig_d0;
- regs->pc -= 2;
+ stepback(regs);
break;
case -ERESTART_RESTARTBLOCK:
regs->d0 = __NR_restart_syscall;
- regs->pc -= 2;
+ stepback(regs);
break;
}
}
# Makefile for the MN10300-specific memory management code
#
+cacheflush-y := cache.o cache-mn10300.o
+cacheflush-$(CONFIG_MN10300_CACHE_WBACK) += cache-flush-mn10300.o
+
+cacheflush-$(CONFIG_MN10300_CACHE_DISABLED) := cache-disabled.o
+
obj-y := \
init.o fault.o pgtable.o extable.o tlb-mn10300.o mmu-context.o \
- misalignment.o dma-alloc.o
-
-ifneq ($(CONFIG_MN10300_CACHE_DISABLED),y)
-obj-y += cache.o cache-mn10300.o
-ifeq ($(CONFIG_MN10300_CACHE_WBACK),y)
-obj-y += cache-flush-mn10300.o
-endif
-endif
+ misalignment.o dma-alloc.o $(cacheflush-y)
--- /dev/null
+/* Handle the cache being disabled
+ *
+ * Copyright (C) 2010 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/mm.h>
+
+/*
+ * allow userspace to flush the instruction cache
+ */
+asmlinkage long sys_cacheflush(unsigned long start, unsigned long end)
+{
+ if (end < start)
+ return -EINVAL;
+ return 0;
+}
void flush_icache_range(unsigned long start, unsigned long end)
{
#ifdef CONFIG_MN10300_CACHE_WBACK
- unsigned long addr, size, off;
+ unsigned long addr, size, base, off;
struct page *page;
pgd_t *pgd;
pud_t *pud;
pmd_t *pmd;
pte_t *ppte, pte;
+ if (end > 0x80000000UL) {
+ /* addresses above 0xa0000000 do not go through the cache */
+ if (end > 0xa0000000UL) {
+ end = 0xa0000000UL;
+ if (start >= end)
+ return;
+ }
+
+ /* kernel addresses between 0x80000000 and 0x9fffffff do not
+ * require page tables, so we just map such addresses directly */
+ base = (start >= 0x80000000UL) ? start : 0x80000000UL;
+ mn10300_dcache_flush_range(base, end);
+ if (base == start)
+ goto invalidate;
+ end = base;
+ }
+
for (; start < end; start += size) {
/* work out how much of the page to flush */
off = start & (PAGE_SIZE - 1);
}
#endif
+invalidate:
mn10300_icache_inv();
}
EXPORT_SYMBOL(flush_icache_range);
nsyms = newptr - (Elf_Sym *)symhdr->sh_addr;
DEBUGP("NEW num_symtab %lu\n", nsyms);
symhdr->sh_size = nsyms * sizeof(Elf_Sym);
- return module_bug_finalize(hdr, sechdrs, me);
+ return 0;
}
void module_arch_cleanup(struct module *mod)
{
deregister_unwind_table(mod);
- module_bug_cleanup(mod);
}
const Elf_Shdr *sechdrs, struct module *me)
{
const Elf_Shdr *sect;
- int err;
-
- err = module_bug_finalize(hdr, sechdrs, me);
- if (err)
- return err;
/* Apply feature fixups */
sect = find_section(hdr, sechdrs, "__ftr_fixup");
void module_arch_cleanup(struct module *mod)
{
- module_bug_cleanup(mod);
}
ti->local_flags &= ~_TLF_RESTORE_SIGMASK;
sigprocmask(SIG_SETMASK, ¤t->saved_sigmask, NULL);
}
+ regs->trap = 0;
return 0; /* no signals delivered */
}
ret = handle_rt_signal64(signr, &ka, &info, oldset, regs);
}
+ regs->trap = 0;
if (ret) {
spin_lock_irq(¤t->sighand->siglock);
sigorsets(¤t->blocked, ¤t->blocked,
if (!sig)
save_r2 = (unsigned int)regs->gpr[2];
err = restore_general_regs(regs, sr);
+ regs->trap = 0;
err |= __get_user(msr, &sr->mc_gregs[PT_MSR]);
if (!sig)
regs->gpr[2] = (unsigned long) save_r2;
regs->nip = (unsigned long) ka->sa.sa_handler;
/* enter the signal handler in big-endian mode */
regs->msr &= ~MSR_LE;
- regs->trap = 0;
return 1;
badframe:
regs->nip = (unsigned long) ka->sa.sa_handler;
/* enter the signal handler in big-endian mode */
regs->msr &= ~MSR_LE;
- regs->trap = 0;
return 1;
err |= __get_user(regs->xer, &sc->gp_regs[PT_XER]);
err |= __get_user(regs->ccr, &sc->gp_regs[PT_CCR]);
/* skip SOFTE */
- err |= __get_user(regs->trap, &sc->gp_regs[PT_TRAP]);
+ regs->trap = 0;
err |= __get_user(regs->dar, &sc->gp_regs[PT_DAR]);
err |= __get_user(regs->dsisr, &sc->gp_regs[PT_DSISR]);
err |= __get_user(regs->result, &sc->gp_regs[PT_RESULT]);
int id_match = 0;
if (dev == NULL || id == NULL)
- return NULL;
+ return clk;
mutex_lock(&clocks_mutex);
list_for_each_entry(p, &clocks, node) {
if (bus_range == NULL || len < 2 * sizeof(int)) {
printk(KERN_WARNING EFIKA_PLATFORM_NAME
": Can't get bus-range for %s\n", pcictrl->full_name);
- return;
+ goto out_put;
}
if (bus_range[1] == bus_range[0])
printk(" controlled by %s\n", pcictrl->full_name);
printk("\n");
- hose = pcibios_alloc_controller(of_node_get(pcictrl));
+ hose = pcibios_alloc_controller(pcictrl);
if (!hose) {
printk(KERN_WARNING EFIKA_PLATFORM_NAME
": Can't allocate PCI controller structure for %s\n",
pcictrl->full_name);
- return;
+ goto out_put;
}
hose->first_busno = bus_range[0];
hose->ops = &rtas_pci_ops;
pci_process_bridge_OF_ranges(hose, pcictrl, 0);
+ return;
+out_put:
+ of_node_put(pcictrl);
}
#else
clrbits32(&simple_gpio->simple_dvo, sync | out);
clrbits8(&wkup_gpio->wkup_dvo, reset);
- /* wait at lease 1 us */
- udelay(2);
+ /* wait for 1 us */
+ udelay(1);
/* Deassert reset */
setbits8(&wkup_gpio->wkup_dvo, reset);
+ /* wait at least 200ns */
+ /* 7 ~= (200ns * timebase) / ns2sec */
+ __delay(7);
+
/* Restore pin-muxing */
out_be32(&simple_gpio->port_config, mux);
{
vfree(me->arch.syminfo);
me->arch.syminfo = NULL;
- return module_bug_finalize(hdr, sechdrs, me);
+ return 0;
}
void module_arch_cleanup(struct module *mod)
{
- module_bug_cleanup(mod);
}
int ret = 0;
ret |= module_dwarf_finalize(hdr, sechdrs, me);
- ret |= module_bug_finalize(hdr, sechdrs, me);
return ret;
}
void module_arch_cleanup(struct module *mod)
{
- module_bug_cleanup(mod);
module_dwarf_cleanup(mod);
}
if (atomic_read(&nmi_active) < 0)
return -ENODEV;
+ pmap = NULL;
if (attr->type == PERF_TYPE_HARDWARE) {
if (attr->config >= sparc_pmu->max_events)
return -EINVAL;
pmap = sparc_map_cache_event(attr->config);
if (IS_ERR(pmap))
return PTR_ERR(pmap);
- } else
+ } else if (attr->type != PERF_TYPE_RAW)
return -EOPNOTSUPP;
+ if (pmap) {
+ hwc->event_base = perf_event_encode(pmap);
+ } else {
+ /* User gives us "(encoding << 16) | pic_mask" for
+ * PERF_TYPE_RAW events.
+ */
+ hwc->event_base = attr->config;
+ }
+
/* We save the enable bits in the config_base. */
hwc->config_base = sparc_pmu->irq_bit;
if (!attr->exclude_user)
if (!attr->exclude_hv)
hwc->config_base |= sparc_pmu->hv_bit;
- hwc->event_base = perf_event_encode(pmap);
-
n = 0;
if (event->group_leader != event) {
n = collect_events(event->group_leader,
return err;
}
-static void setup_frame32(struct k_sigaction *ka, struct pt_regs *regs,
- int signo, sigset_t *oldset)
+/* The I-cache flush instruction only works in the primary ASI, which
+ * right now is the nucleus, aka. kernel space.
+ *
+ * Therefore we have to kick the instructions out using the kernel
+ * side linear mapping of the physical address backing the user
+ * instructions.
+ */
+static void flush_signal_insns(unsigned long address)
+{
+ unsigned long pstate, paddr;
+ pte_t *ptep, pte;
+ pgd_t *pgdp;
+ pud_t *pudp;
+ pmd_t *pmdp;
+
+ /* Commit all stores of the instructions we are about to flush. */
+ wmb();
+
+ /* Disable cross-call reception. In this way even a very wide
+ * munmap() on another cpu can't tear down the page table
+ * hierarchy from underneath us, since that can't complete
+ * until the IPI tlb flush returns.
+ */
+
+ __asm__ __volatile__("rdpr %%pstate, %0" : "=r" (pstate));
+ __asm__ __volatile__("wrpr %0, %1, %%pstate"
+ : : "r" (pstate), "i" (PSTATE_IE));
+
+ pgdp = pgd_offset(current->mm, address);
+ if (pgd_none(*pgdp))
+ goto out_irqs_on;
+ pudp = pud_offset(pgdp, address);
+ if (pud_none(*pudp))
+ goto out_irqs_on;
+ pmdp = pmd_offset(pudp, address);
+ if (pmd_none(*pmdp))
+ goto out_irqs_on;
+
+ ptep = pte_offset_map(pmdp, address);
+ pte = *ptep;
+ if (!pte_present(pte))
+ goto out_unmap;
+
+ paddr = (unsigned long) page_address(pte_page(pte));
+
+ __asm__ __volatile__("flush %0 + %1"
+ : /* no outputs */
+ : "r" (paddr),
+ "r" (address & (PAGE_SIZE - 1))
+ : "memory");
+
+out_unmap:
+ pte_unmap(ptep);
+out_irqs_on:
+ __asm__ __volatile__("wrpr %0, 0x0, %%pstate" : : "r" (pstate));
+
+}
+
+static int setup_frame32(struct k_sigaction *ka, struct pt_regs *regs,
+ int signo, sigset_t *oldset)
{
struct signal_frame32 __user *sf;
int sigframe_size;
if (ka->ka_restorer) {
regs->u_regs[UREG_I7] = (unsigned long)ka->ka_restorer;
} else {
- /* Flush instruction space. */
unsigned long address = ((unsigned long)&(sf->insns[0]));
- pgd_t *pgdp = pgd_offset(current->mm, address);
- pud_t *pudp = pud_offset(pgdp, address);
- pmd_t *pmdp = pmd_offset(pudp, address);
- pte_t *ptep;
- pte_t pte;
regs->u_regs[UREG_I7] = (unsigned long) (&(sf->insns[0]) - 2);
if (err)
goto sigsegv;
- preempt_disable();
- ptep = pte_offset_map(pmdp, address);
- pte = *ptep;
- if (pte_present(pte)) {
- unsigned long page = (unsigned long)
- page_address(pte_page(pte));
-
- wmb();
- __asm__ __volatile__("flush %0 + %1"
- : /* no outputs */
- : "r" (page),
- "r" (address & (PAGE_SIZE - 1))
- : "memory");
- }
- pte_unmap(ptep);
- preempt_enable();
+ flush_signal_insns(address);
}
- return;
+ return 0;
sigill:
do_exit(SIGILL);
+ return -EINVAL;
+
sigsegv:
force_sigsegv(signo, current);
+ return -EFAULT;
}
-static void setup_rt_frame32(struct k_sigaction *ka, struct pt_regs *regs,
- unsigned long signr, sigset_t *oldset,
- siginfo_t *info)
+static int setup_rt_frame32(struct k_sigaction *ka, struct pt_regs *regs,
+ unsigned long signr, sigset_t *oldset,
+ siginfo_t *info)
{
struct rt_signal_frame32 __user *sf;
int sigframe_size;
if (ka->ka_restorer)
regs->u_regs[UREG_I7] = (unsigned long)ka->ka_restorer;
else {
- /* Flush instruction space. */
unsigned long address = ((unsigned long)&(sf->insns[0]));
- pgd_t *pgdp = pgd_offset(current->mm, address);
- pud_t *pudp = pud_offset(pgdp, address);
- pmd_t *pmdp = pmd_offset(pudp, address);
- pte_t *ptep;
regs->u_regs[UREG_I7] = (unsigned long) (&(sf->insns[0]) - 2);
if (err)
goto sigsegv;
- preempt_disable();
- ptep = pte_offset_map(pmdp, address);
- if (pte_present(*ptep)) {
- unsigned long page = (unsigned long)
- page_address(pte_page(*ptep));
-
- wmb();
- __asm__ __volatile__("flush %0 + %1"
- : /* no outputs */
- : "r" (page),
- "r" (address & (PAGE_SIZE - 1))
- : "memory");
- }
- pte_unmap(ptep);
- preempt_enable();
+ flush_signal_insns(address);
}
- return;
+ return 0;
sigill:
do_exit(SIGILL);
+ return -EINVAL;
+
sigsegv:
force_sigsegv(signr, current);
+ return -EFAULT;
}
-static inline void handle_signal32(unsigned long signr, struct k_sigaction *ka,
- siginfo_t *info,
- sigset_t *oldset, struct pt_regs *regs)
+static inline int handle_signal32(unsigned long signr, struct k_sigaction *ka,
+ siginfo_t *info,
+ sigset_t *oldset, struct pt_regs *regs)
{
+ int err;
+
if (ka->sa.sa_flags & SA_SIGINFO)
- setup_rt_frame32(ka, regs, signr, oldset, info);
+ err = setup_rt_frame32(ka, regs, signr, oldset, info);
else
- setup_frame32(ka, regs, signr, oldset);
+ err = setup_frame32(ka, regs, signr, oldset);
+
+ if (err)
+ return err;
spin_lock_irq(¤t->sighand->siglock);
sigorsets(¤t->blocked,¤t->blocked,&ka->sa.sa_mask);
sigaddset(¤t->blocked,signr);
recalc_sigpending();
spin_unlock_irq(¤t->sighand->siglock);
+
+ tracehook_signal_handler(signr, info, ka, regs, 0);
+
+ return 0;
}
static inline void syscall_restart32(unsigned long orig_i0, struct pt_regs *regs,
if (signr > 0) {
if (restart_syscall)
syscall_restart32(orig_i0, regs, &ka.sa);
- handle_signal32(signr, &ka, &info, oldset, regs);
-
- /* A signal was successfully delivered; the saved
- * sigmask will have been stored in the signal frame,
- * and will be restored by sigreturn, so we can simply
- * clear the TS_RESTORE_SIGMASK flag.
- */
- current_thread_info()->status &= ~TS_RESTORE_SIGMASK;
-
- tracehook_signal_handler(signr, &info, &ka, regs, 0);
+ if (handle_signal32(signr, &ka, &info, oldset, regs) == 0) {
+ /* A signal was successfully delivered; the saved
+ * sigmask will have been stored in the signal frame,
+ * and will be restored by sigreturn, so we can simply
+ * clear the TS_RESTORE_SIGMASK flag.
+ */
+ current_thread_info()->status &= ~TS_RESTORE_SIGMASK;
+ }
return;
}
if (restart_syscall &&
regs->u_regs[UREG_I0] = orig_i0;
regs->tpc -= 4;
regs->tnpc -= 4;
+ pt_regs_clear_syscall(regs);
}
if (restart_syscall &&
regs->u_regs[UREG_I0] == ERESTART_RESTARTBLOCK) {
regs->u_regs[UREG_G1] = __NR_restart_syscall;
regs->tpc -= 4;
regs->tnpc -= 4;
+ pt_regs_clear_syscall(regs);
}
/* If there's no signal to deliver, we just put the saved sigmask
return err;
}
-static void setup_frame(struct k_sigaction *ka, struct pt_regs *regs,
- int signo, sigset_t *oldset)
+static int setup_frame(struct k_sigaction *ka, struct pt_regs *regs,
+ int signo, sigset_t *oldset)
{
struct signal_frame __user *sf;
int sigframe_size, err;
/* Flush instruction space. */
flush_sig_insns(current->mm, (unsigned long) &(sf->insns[0]));
}
- return;
+ return 0;
sigill_and_return:
do_exit(SIGILL);
+ return -EINVAL;
+
sigsegv:
force_sigsegv(signo, current);
+ return -EFAULT;
}
-static void setup_rt_frame(struct k_sigaction *ka, struct pt_regs *regs,
- int signo, sigset_t *oldset, siginfo_t *info)
+static int setup_rt_frame(struct k_sigaction *ka, struct pt_regs *regs,
+ int signo, sigset_t *oldset, siginfo_t *info)
{
struct rt_signal_frame __user *sf;
int sigframe_size;
/* Flush instruction space. */
flush_sig_insns(current->mm, (unsigned long) &(sf->insns[0]));
}
- return;
+ return 0;
sigill:
do_exit(SIGILL);
+ return -EINVAL;
+
sigsegv:
force_sigsegv(signo, current);
+ return -EFAULT;
}
-static inline void
+static inline int
handle_signal(unsigned long signr, struct k_sigaction *ka,
siginfo_t *info, sigset_t *oldset, struct pt_regs *regs)
{
+ int err;
+
if (ka->sa.sa_flags & SA_SIGINFO)
- setup_rt_frame(ka, regs, signr, oldset, info);
+ err = setup_rt_frame(ka, regs, signr, oldset, info);
else
- setup_frame(ka, regs, signr, oldset);
+ err = setup_frame(ka, regs, signr, oldset);
+
+ if (err)
+ return err;
spin_lock_irq(¤t->sighand->siglock);
sigorsets(¤t->blocked,¤t->blocked,&ka->sa.sa_mask);
sigaddset(¤t->blocked, signr);
recalc_sigpending();
spin_unlock_irq(¤t->sighand->siglock);
+
+ tracehook_signal_handler(signr, info, ka, regs, 0);
+
+ return 0;
}
static inline void syscall_restart(unsigned long orig_i0, struct pt_regs *regs,
if (signr > 0) {
if (restart_syscall)
syscall_restart(orig_i0, regs, &ka.sa);
- handle_signal(signr, &ka, &info, oldset, regs);
-
- /* a signal was successfully delivered; the saved
- * sigmask will have been stored in the signal frame,
- * and will be restored by sigreturn, so we can simply
- * clear the TIF_RESTORE_SIGMASK flag.
- */
- if (test_thread_flag(TIF_RESTORE_SIGMASK))
- clear_thread_flag(TIF_RESTORE_SIGMASK);
-
- tracehook_signal_handler(signr, &info, &ka, regs, 0);
+ if (handle_signal(signr, &ka, &info, oldset, regs) == 0) {
+ /* a signal was successfully delivered; the saved
+ * sigmask will have been stored in the signal frame,
+ * and will be restored by sigreturn, so we can simply
+ * clear the TIF_RESTORE_SIGMASK flag.
+ */
+ if (test_thread_flag(TIF_RESTORE_SIGMASK))
+ clear_thread_flag(TIF_RESTORE_SIGMASK);
+ }
return;
}
if (restart_syscall &&
regs->u_regs[UREG_I0] = orig_i0;
regs->pc -= 4;
regs->npc -= 4;
+ pt_regs_clear_syscall(regs);
}
if (restart_syscall &&
regs->u_regs[UREG_I0] == ERESTART_RESTARTBLOCK) {
regs->u_regs[UREG_G1] = __NR_restart_syscall;
regs->pc -= 4;
regs->npc -= 4;
+ pt_regs_clear_syscall(regs);
}
/* if there's no signal to deliver, we just put the saved sigmask
return (void __user *) sp;
}
-static inline void
+static inline int
setup_rt_frame(struct k_sigaction *ka, struct pt_regs *regs,
int signo, sigset_t *oldset, siginfo_t *info)
{
}
/* 4. return to kernel instructions */
regs->u_regs[UREG_I7] = (unsigned long)ka->ka_restorer;
- return;
+ return 0;
sigill:
do_exit(SIGILL);
+ return -EINVAL;
+
sigsegv:
force_sigsegv(signo, current);
+ return -EFAULT;
}
-static inline void handle_signal(unsigned long signr, struct k_sigaction *ka,
- siginfo_t *info,
- sigset_t *oldset, struct pt_regs *regs)
+static inline int handle_signal(unsigned long signr, struct k_sigaction *ka,
+ siginfo_t *info,
+ sigset_t *oldset, struct pt_regs *regs)
{
- setup_rt_frame(ka, regs, signr, oldset,
- (ka->sa.sa_flags & SA_SIGINFO) ? info : NULL);
+ int err;
+
+ err = setup_rt_frame(ka, regs, signr, oldset,
+ (ka->sa.sa_flags & SA_SIGINFO) ? info : NULL);
+ if (err)
+ return err;
spin_lock_irq(¤t->sighand->siglock);
sigorsets(¤t->blocked,¤t->blocked,&ka->sa.sa_mask);
if (!(ka->sa.sa_flags & SA_NOMASK))
sigaddset(¤t->blocked,signr);
recalc_sigpending();
spin_unlock_irq(¤t->sighand->siglock);
+
+ tracehook_signal_handler(signr, info, ka, regs, 0);
+
+ return 0;
}
static inline void syscall_restart(unsigned long orig_i0, struct pt_regs *regs,
if (signr > 0) {
if (restart_syscall)
syscall_restart(orig_i0, regs, &ka.sa);
- handle_signal(signr, &ka, &info, oldset, regs);
-
- /* A signal was successfully delivered; the saved
- * sigmask will have been stored in the signal frame,
- * and will be restored by sigreturn, so we can simply
- * clear the TS_RESTORE_SIGMASK flag.
- */
- current_thread_info()->status &= ~TS_RESTORE_SIGMASK;
-
- tracehook_signal_handler(signr, &info, &ka, regs, 0);
+ if (handle_signal(signr, &ka, &info, oldset, regs) == 0) {
+ /* A signal was successfully delivered; the saved
+ * sigmask will have been stored in the signal frame,
+ * and will be restored by sigreturn, so we can simply
+ * clear the TS_RESTORE_SIGMASK flag.
+ */
+ current_thread_info()->status &= ~TS_RESTORE_SIGMASK;
+ }
return;
}
if (restart_syscall &&
regs->u_regs[UREG_I0] = orig_i0;
regs->tpc -= 4;
regs->tnpc -= 4;
+ pt_regs_clear_syscall(regs);
}
if (restart_syscall &&
regs->u_regs[UREG_I0] == ERESTART_RESTARTBLOCK) {
regs->u_regs[UREG_G1] = __NR_restart_syscall;
regs->tpc -= 4;
regs->tnpc -= 4;
+ pt_regs_clear_syscall(regs);
}
/* If there's no signal to deliver, we just put the saved sigmask
}
STD_ENDPROC(handle_ill)
- .pushsection .rodata, "a"
- .align 8
-bpt_code:
- bpt
- ENDPROC(bpt_code)
- .popsection
-
/* Various stub interrupt handlers and syscall handlers */
STD_ENTRY_LOCAL(_kernel_double_fault)
" This is used to specify the host mixer device to the hostaudio driver.\n"\
" The default is \"" HOSTAUDIO_DEV_MIXER "\".\n\n"
+module_param(dsp, charp, 0644);
+MODULE_PARM_DESC(dsp, DSP_HELP);
+module_param(mixer, charp, 0644);
+MODULE_PARM_DESC(mixer, MIXER_HELP);
+
#ifndef MODULE
static int set_dsp(char *name, int *add)
{
}
__uml_setup("mixer=", set_mixer, "mixer=<mixer device>\n" MIXER_HELP);
-
-#else /*MODULE*/
-
-module_param(dsp, charp, 0644);
-MODULE_PARM_DESC(dsp, DSP_HELP);
-
-module_param(mixer, charp, 0644);
-MODULE_PARM_DESC(mixer, MIXER_HELP);
-
#endif
/* /dev/dsp file operations */
netif_wake_queue(dev);
}
-static int uml_net_set_mac(struct net_device *dev, void *addr)
-{
- struct uml_net_private *lp = netdev_priv(dev);
- struct sockaddr *hwaddr = addr;
-
- spin_lock_irq(&lp->lock);
- eth_mac_addr(dev, hwaddr->sa_data);
- spin_unlock_irq(&lp->lock);
-
- return 0;
-}
-
static int uml_net_change_mtu(struct net_device *dev, int new_mtu)
{
dev->mtu = new_mtu;
.ndo_start_xmit = uml_net_start_xmit,
.ndo_set_multicast_list = uml_net_set_multicast_list,
.ndo_tx_timeout = uml_net_tx_timeout,
- .ndo_set_mac_address = uml_net_set_mac,
+ .ndo_set_mac_address = eth_mac_addr,
.ndo_change_mtu = uml_net_change_mtu,
.ndo_validate_addr = eth_validate_addr,
};
((*transport->user->init)(&lp->user, dev) != 0))
goto out_unregister;
- eth_mac_addr(dev, device->mac);
+ /* don't use eth_mac_addr, it will not work here */
+ memcpy(dev->dev_addr, device->mac, ETH_ALEN);
dev->mtu = transport->user->mtu;
dev->netdev_ops = ¨_netdev_ops;
dev->ethtool_ops = ¨_net_ethtool_ops;
struct scatterlist sg[MAX_SG];
struct request *request;
int start_sg, end_sg;
+ sector_t rq_pos;
};
#define DEFAULT_COW { \
.request = NULL, \
.start_sg = 0, \
.end_sg = 0, \
+ .rq_pos = 0, \
}
/* Protected by ubd_lock */
{
struct io_thread_req *io_req;
struct request *req;
- sector_t sector;
int n;
while(1){
return;
dev->request = req;
+ dev->rq_pos = blk_rq_pos(req);
dev->start_sg = 0;
dev->end_sg = blk_rq_map_sg(q, req, dev->sg);
}
req = dev->request;
- sector = blk_rq_pos(req);
while(dev->start_sg < dev->end_sg){
struct scatterlist *sg = &dev->sg[dev->start_sg];
return;
}
prepare_request(req, io_req,
- (unsigned long long)sector << 9,
+ (unsigned long long)dev->rq_pos << 9,
sg->offset, sg->length, sg_page(sg));
- sector += sg->length >> 9;
n = os_write_file(thread_fd, &io_req,
sizeof(struct io_thread_req *));
if(n != sizeof(struct io_thread_req *)){
return;
}
+ dev->rq_pos += sg->length >> 9;
dev->start_sg++;
}
dev->end_sg = 0;
return error;
}
-long um_execve(const char *file, char __user *__user *argv, char __user *__user *env)
+long um_execve(const char *file, const char __user *const __user *argv, const char __user *const __user *env)
{
long err;
return err;
}
-long sys_execve(const char __user *file, char __user *__user *argv,
- char __user *__user *env)
+long sys_execve(const char __user *file, const char __user *const __user *argv,
+ const char __user *const __user *env)
{
long error;
char *filename;
-extern long um_execve(const char *file, char __user *__user *argv, char __user *__user *env);
+extern long um_execve(const char *file, const char __user *const __user *argv, const char __user *const __user *env);
fs = get_fs();
set_fs(KERNEL_DS);
- ret = um_execve(filename, (char __user *__user *)argv,
- (char __user *__user *) envp);
+ ret = um_execve(filename, (const char __user *const __user *)argv,
+ (const char __user *const __user *) envp);
set_fs(fs);
return ret;
if (arg[pos] == ',')
pos++;
- if (!strncmp(arg, "ttyS", 4)) {
+ /*
+ * make sure we have
+ * "serial,0x3f8,115200"
+ * "serial,ttyS0,115200"
+ * "ttyS0,115200"
+ */
+ if (pos == 7 && !strncmp(arg + pos, "0x", 2)) {
+ port = simple_strtoull(arg + pos, &e, 16);
+ if (port == 0 || arg + pos == e)
+ port = DEFAULT_SERIAL_PORT;
+ else
+ pos = e - arg;
+ } else if (!strncmp(arg + pos, "ttyS", 4)) {
static const int bases[] = { 0x3f8, 0x2f8 };
int idx = 0;
#include <asm/ia32.h>
#undef WARN_OLD
-#undef CORE_DUMP /* probably broken */
+#undef CORE_DUMP /* definitely broken */
static int load_aout_binary(struct linux_binprm *, struct pt_regs *regs);
static int load_aout_library(struct file *);
* macros to write out all the necessary info.
*/
-static int dump_write(struct file *file, const void *addr, int nr)
-{
- return file->f_op->write(file, addr, nr, &file->f_pos) == nr;
-}
+#include <linux/coredump.h>
#define DUMP_WRITE(addr, nr) \
if (!dump_write(file, (void *)(addr), (nr))) \
goto end_coredump;
-#define DUMP_SEEK(offset) \
- if (file->f_op->llseek) { \
- if (file->f_op->llseek(file, (offset), 0) != (offset)) \
- goto end_coredump; \
- } else \
- file->f_pos = (offset)
+#define DUMP_SEEK(offset) \
+ if (!dump_seek(file, offset)) \
+ goto end_coredump;
#define START_DATA() (u.u_tsize << PAGE_SHIFT)
#define START_STACK(u) (u.start_stack)
dump_size = dump.u_ssize << PAGE_SHIFT;
DUMP_WRITE(dump_start, dump_size);
}
- /*
- * Finally dump the task struct. Not be used by gdb, but
- * could be useful
- */
- set_fs(KERNEL_DS);
- DUMP_WRITE(current, sizeof(*current));
end_coredump:
set_fs(fs);
return has_dumped;
#endif /* !CONFIG_AMD_IOMMU_STATS */
+static inline bool is_rd890_iommu(struct pci_dev *pdev)
+{
+ return (pdev->vendor == PCI_VENDOR_ID_ATI) &&
+ (pdev->device == PCI_DEVICE_ID_RD890_IOMMU);
+}
+
#endif /* _ASM_X86_AMD_IOMMU_PROTO_H */
/* capabilities of that IOMMU read from ACPI */
u32 cap;
+ /* flags read from acpi table */
+ u8 acpi_flags;
+
/*
* Capability pointer. There could be more than one IOMMU per PCI
* device function if there are more than one AMD IOMMU capability
/* default dma_ops domain for that IOMMU */
struct dma_ops_domain *default_dom;
+
+ /*
+ * This array is required to work around a potential BIOS bug.
+ * The BIOS may miss to restore parts of the PCI configuration
+ * space when the system resumes from S3. The result is that the
+ * IOMMU does not execute commands anymore which leads to system
+ * failure.
+ */
+ u32 cache_cfg[4];
};
/*
static __always_inline int constant_test_bit(unsigned int nr, const volatile unsigned long *addr)
{
return ((1UL << (nr % BITS_PER_LONG)) &
- (((unsigned long *)addr)[nr / BITS_PER_LONG])) != 0;
+ (addr[nr / BITS_PER_LONG])) != 0;
}
static inline int variable_test_bit(int nr, volatile const unsigned long *addr)
#define X86_FEATURE_XSAVEOPT (7*32+ 4) /* Optimized Xsave */
#define X86_FEATURE_PLN (7*32+ 5) /* Intel Power Limit Notification */
#define X86_FEATURE_PTS (7*32+ 6) /* Intel Package Thermal Status */
+#define X86_FEATURE_DTS (7*32+ 7) /* Digital Thermal Sensor */
/* Virtualization flags: Linux defined, word 8 */
#define X86_FEATURE_TPR_SHADOW (8*32+ 0) /* Intel TPR Shadow */
#include <linux/list.h>
/* Available HW breakpoint length encodings */
-#define X86_BREAKPOINT_LEN_X 0x00
+#define X86_BREAKPOINT_LEN_X 0x40
#define X86_BREAKPOINT_LEN_1 0x40
#define X86_BREAKPOINT_LEN_2 0x44
#define X86_BREAKPOINT_LEN_4 0x4c
return (struct kvm_mmu_page *)page_private(page);
}
-static inline u16 kvm_read_fs(void)
-{
- u16 seg;
- asm("mov %%fs, %0" : "=g"(seg));
- return seg;
-}
-
-static inline u16 kvm_read_gs(void)
-{
- u16 seg;
- asm("mov %%gs, %0" : "=g"(seg));
- return seg;
-}
-
static inline u16 kvm_read_ldt(void)
{
u16 ldt;
return ldt;
}
-static inline void kvm_load_fs(u16 sel)
-{
- asm("mov %0, %%fs" : : "rm"(sel));
-}
-
-static inline void kvm_load_gs(u16 sel)
-{
- asm("mov %0, %%gs" : : "rm"(sel));
-}
-
static inline void kvm_load_ldt(u16 sel)
{
asm("lldt %0" : : "rm"(sel));
CFLAGS_REMOVE_tsc.o = -pg
CFLAGS_REMOVE_rtc.o = -pg
CFLAGS_REMOVE_paravirt-spinlocks.o = -pg
+CFLAGS_REMOVE_pvclock.o = -pg
+CFLAGS_REMOVE_kvmclock.o = -pg
CFLAGS_REMOVE_ftrace.o = -pg
CFLAGS_REMOVE_early_printk.o = -pg
endif
unsigned int ecx;
} states[ACPI_PROCESSOR_MAX_POWER];
};
-static struct cstate_entry *cpu_cstate_entry; /* per CPU ptr */
+static struct cstate_entry __percpu *cpu_cstate_entry; /* per CPU ptr */
static short mwait_supported[ACPI_PROCESSOR_MAX_POWER];
size_t size,
int dir)
{
+ dma_addr_t flush_addr;
dma_addr_t i, start;
unsigned int pages;
(dma_addr + size > dma_dom->aperture_size))
return;
+ flush_addr = dma_addr;
pages = iommu_num_pages(dma_addr, size, PAGE_SIZE);
dma_addr &= PAGE_MASK;
start = dma_addr;
dma_ops_free_addresses(dma_dom, dma_addr, pages);
if (amd_iommu_unmap_flush || dma_dom->need_flush) {
- iommu_flush_pages(&dma_dom->domain, dma_addr, size);
+ iommu_flush_pages(&dma_dom->domain, flush_addr, size);
dma_dom->need_flush = false;
}
}
iommu->last_device = calc_devid(MMIO_GET_BUS(range),
MMIO_GET_LD(range));
iommu->evt_msi_num = MMIO_MSI_NUM(misc);
+
+ if (is_rd890_iommu(iommu->dev)) {
+ pci_read_config_dword(iommu->dev, 0xf0, &iommu->cache_cfg[0]);
+ pci_read_config_dword(iommu->dev, 0xf4, &iommu->cache_cfg[1]);
+ pci_read_config_dword(iommu->dev, 0xf8, &iommu->cache_cfg[2]);
+ pci_read_config_dword(iommu->dev, 0xfc, &iommu->cache_cfg[3]);
+ }
}
/*
struct ivhd_entry *e;
/*
- * First set the recommended feature enable bits from ACPI
- * into the IOMMU control registers
+ * First save the recommended feature enable bits from ACPI
*/
- h->flags & IVHD_FLAG_HT_TUN_EN_MASK ?
- iommu_feature_enable(iommu, CONTROL_HT_TUN_EN) :
- iommu_feature_disable(iommu, CONTROL_HT_TUN_EN);
-
- h->flags & IVHD_FLAG_PASSPW_EN_MASK ?
- iommu_feature_enable(iommu, CONTROL_PASSPW_EN) :
- iommu_feature_disable(iommu, CONTROL_PASSPW_EN);
-
- h->flags & IVHD_FLAG_RESPASSPW_EN_MASK ?
- iommu_feature_enable(iommu, CONTROL_RESPASSPW_EN) :
- iommu_feature_disable(iommu, CONTROL_RESPASSPW_EN);
-
- h->flags & IVHD_FLAG_ISOC_EN_MASK ?
- iommu_feature_enable(iommu, CONTROL_ISOC_EN) :
- iommu_feature_disable(iommu, CONTROL_ISOC_EN);
-
- /*
- * make IOMMU memory accesses cache coherent
- */
- iommu_feature_enable(iommu, CONTROL_COHERENT_EN);
+ iommu->acpi_flags = h->flags;
/*
* Done. Now parse the device entries
}
}
+static void iommu_init_flags(struct amd_iommu *iommu)
+{
+ iommu->acpi_flags & IVHD_FLAG_HT_TUN_EN_MASK ?
+ iommu_feature_enable(iommu, CONTROL_HT_TUN_EN) :
+ iommu_feature_disable(iommu, CONTROL_HT_TUN_EN);
+
+ iommu->acpi_flags & IVHD_FLAG_PASSPW_EN_MASK ?
+ iommu_feature_enable(iommu, CONTROL_PASSPW_EN) :
+ iommu_feature_disable(iommu, CONTROL_PASSPW_EN);
+
+ iommu->acpi_flags & IVHD_FLAG_RESPASSPW_EN_MASK ?
+ iommu_feature_enable(iommu, CONTROL_RESPASSPW_EN) :
+ iommu_feature_disable(iommu, CONTROL_RESPASSPW_EN);
+
+ iommu->acpi_flags & IVHD_FLAG_ISOC_EN_MASK ?
+ iommu_feature_enable(iommu, CONTROL_ISOC_EN) :
+ iommu_feature_disable(iommu, CONTROL_ISOC_EN);
+
+ /*
+ * make IOMMU memory accesses cache coherent
+ */
+ iommu_feature_enable(iommu, CONTROL_COHERENT_EN);
+}
+
+static void iommu_apply_quirks(struct amd_iommu *iommu)
+{
+ if (is_rd890_iommu(iommu->dev)) {
+ pci_write_config_dword(iommu->dev, 0xf0, iommu->cache_cfg[0]);
+ pci_write_config_dword(iommu->dev, 0xf4, iommu->cache_cfg[1]);
+ pci_write_config_dword(iommu->dev, 0xf8, iommu->cache_cfg[2]);
+ pci_write_config_dword(iommu->dev, 0xfc, iommu->cache_cfg[3]);
+ }
+}
+
/*
* This function finally enables all IOMMUs found in the system after
* they have been initialized
for_each_iommu(iommu) {
iommu_disable(iommu);
+ iommu_apply_quirks(iommu);
+ iommu_init_flags(iommu);
iommu_set_device_table(iommu);
iommu_enable_command_buffer(iommu);
iommu_enable_event_buffer(iommu);
old_cfg = old_desc->chip_data;
- memcpy(cfg, old_cfg, sizeof(struct irq_cfg));
+ cfg->vector = old_cfg->vector;
+ cfg->move_in_progress = old_cfg->move_in_progress;
+ cpumask_copy(cfg->domain, old_cfg->domain);
+ cpumask_copy(cfg->old_domain, old_cfg->old_domain);
init_copy_irq_2_pin(old_cfg, cfg, node);
}
-static void free_irq_cfg(struct irq_cfg *old_cfg)
+static void free_irq_cfg(struct irq_cfg *cfg)
{
- kfree(old_cfg);
+ free_cpumask_var(cfg->domain);
+ free_cpumask_var(cfg->old_domain);
+ kfree(cfg);
}
void arch_free_chip_data(struct irq_desc *old_desc, struct irq_desc *desc)
}
}
-static void __cpuinit get_cpu_cap(struct cpuinfo_x86 *c)
+void __cpuinit get_cpu_cap(struct cpuinfo_x86 *c)
{
u32 tfms, xlvl;
u32 ebx;
*const __x86_cpu_dev_end[];
extern void cpu_detect_cache_sizes(struct cpuinfo_x86 *c);
+extern void get_cpu_cap(struct cpuinfo_x86 *c);
#endif
per_cpu(acfreq_data, policy->cpu) = NULL;
acpi_processor_unregister_performance(data->acpi_data,
policy->cpu);
+ kfree(data->freq_table);
kfree(data);
}
return -ENODEV;
out_obj = output.pointer;
- if (out_obj->type != ACPI_TYPE_BUFFER)
- return -ENODEV;
+ if (out_obj->type != ACPI_TYPE_BUFFER) {
+ ret = -ENODEV;
+ goto out_free;
+ }
errors = *((u32 *)out_obj->buffer.pointer) & ~(1 << 0);
- if (errors)
- return -ENODEV;
+ if (errors) {
+ ret = -ENODEV;
+ goto out_free;
+ }
supported = *((u32 *)(out_obj->buffer.pointer + 4));
- if (!(supported & 0x1))
- return -ENODEV;
+ if (!(supported & 0x1)) {
+ ret = -ENODEV;
+ goto out_free;
+ }
out_free:
kfree(output.pointer);
misc_enable &= ~MSR_IA32_MISC_ENABLE_LIMIT_CPUID;
wrmsrl(MSR_IA32_MISC_ENABLE, misc_enable);
c->cpuid_level = cpuid_eax(0);
+ get_cpu_cap(c);
}
}
address = (low & MASK_BLKPTR_LO) >> 21;
if (!address)
break;
+
address += MCG_XBLK_ADDR;
} else
++address;
if (rdmsr_safe(address, &low, &high))
break;
- if (!(high & MASK_VALID_HI)) {
- if (block)
- continue;
- else
- break;
- }
+ if (!(high & MASK_VALID_HI))
+ continue;
if (!(high & MASK_CNTP_HI) ||
(high & MASK_LOCKED_HI))
err = sysfs_add_file_to_group(&sys_dev->kobj,
&attr_core_power_limit_count.attr,
thermal_attr_group.name);
- if (cpu_has(c, X86_FEATURE_PTS))
+ if (cpu_has(c, X86_FEATURE_PTS)) {
err = sysfs_add_file_to_group(&sys_dev->kobj,
&attr_package_throttle_count.attr,
thermal_attr_group.name);
err = sysfs_add_file_to_group(&sys_dev->kobj,
&attr_package_power_limit_count.attr,
thermal_attr_group.name);
+ }
return err;
}
*/
struct perf_event *events[X86_PMC_IDX_MAX]; /* in counter order */
unsigned long active_mask[BITS_TO_LONGS(X86_PMC_IDX_MAX)];
+ unsigned long running[BITS_TO_LONGS(X86_PMC_IDX_MAX)];
int enabled;
int n_events;
x86_perf_event_set_period(event);
cpuc->events[idx] = event;
__set_bit(idx, cpuc->active_mask);
+ __set_bit(idx, cpuc->running);
x86_pmu.enable(event);
perf_event_update_userpage(event);
cpuc = &__get_cpu_var(cpu_hw_events);
for (idx = 0; idx < x86_pmu.num_counters; idx++) {
- if (!test_bit(idx, cpuc->active_mask))
+ if (!test_bit(idx, cpuc->active_mask)) {
+ /*
+ * Though we deactivated the counter some cpus
+ * might still deliver spurious interrupts still
+ * in flight. Catch them:
+ */
+ if (__test_and_clear_bit(idx, cpuc->running))
+ handled++;
continue;
+ }
event = cpuc->events[idx];
hwc = &event->hw;
for (idx = 0; idx < x86_pmu.num_counters; idx++) {
int overflow;
- if (!test_bit(idx, cpuc->active_mask))
+ if (!test_bit(idx, cpuc->active_mask)) {
+ /* catch in-flight IRQs */
+ if (__test_and_clear_bit(idx, cpuc->running))
+ handled++;
continue;
+ }
event = cpuc->events[idx];
hwc = &event->hw;
const struct cpuid_bit *cb;
static const struct cpuid_bit __cpuinitconst cpuid_bits[] = {
+ { X86_FEATURE_DTS, CR_EAX, 0, 0x00000006, 0 },
{ X86_FEATURE_IDA, CR_EAX, 1, 0x00000006, 0 },
{ X86_FEATURE_ARAT, CR_EAX, 2, 0x00000006, 0 },
{ X86_FEATURE_PLN, CR_EAX, 4, 0x00000006, 0 },
{
unsigned int irq;
- irq = create_irq();
+ irq = create_irq_nr(0, -1);
if (!irq)
return -EINVAL;
int arch_bp_generic_fields(int x86_len, int x86_type,
int *gen_len, int *gen_type)
{
- /* Len */
- switch (x86_len) {
- case X86_BREAKPOINT_LEN_X:
+ /* Type */
+ switch (x86_type) {
+ case X86_BREAKPOINT_EXECUTE:
+ if (x86_len != X86_BREAKPOINT_LEN_X)
+ return -EINVAL;
+
+ *gen_type = HW_BREAKPOINT_X;
*gen_len = sizeof(long);
+ return 0;
+ case X86_BREAKPOINT_WRITE:
+ *gen_type = HW_BREAKPOINT_W;
break;
+ case X86_BREAKPOINT_RW:
+ *gen_type = HW_BREAKPOINT_W | HW_BREAKPOINT_R;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ /* Len */
+ switch (x86_len) {
case X86_BREAKPOINT_LEN_1:
*gen_len = HW_BREAKPOINT_LEN_1;
break;
return -EINVAL;
}
- /* Type */
- switch (x86_type) {
- case X86_BREAKPOINT_EXECUTE:
- *gen_type = HW_BREAKPOINT_X;
- break;
- case X86_BREAKPOINT_WRITE:
- *gen_type = HW_BREAKPOINT_W;
- break;
- case X86_BREAKPOINT_RW:
- *gen_type = HW_BREAKPOINT_W | HW_BREAKPOINT_R;
- break;
- default:
- return -EINVAL;
- }
-
return 0;
}
ret = -EINVAL;
switch (info->len) {
- case X86_BREAKPOINT_LEN_X:
- align = sizeof(long) -1;
- break;
case X86_BREAKPOINT_LEN_1:
align = 0;
break;
apply_paravirt(pseg, pseg + para->sh_size);
}
- return module_bug_finalize(hdr, sechdrs, me);
+ return 0;
}
void module_arch_cleanup(struct module *mod)
{
alternatives_smp_module_del(mod);
- module_bug_cleanup(mod);
}
control->iopm_base_pa = iopm_base;
control->msrpm_base_pa = __pa(svm->msrpm);
- control->tsc_offset = 0;
control->int_ctl = V_INTR_MASKING_MASK;
init_seg(&save->es);
svm->vmcb_pa = page_to_pfn(page) << PAGE_SHIFT;
svm->asid_generation = 0;
init_vmcb(svm);
+ svm->vmcb->control.tsc_offset = 0-native_read_tsc();
err = fx_init(&svm->vcpu);
if (err)
sync_lapic_to_cr8(vcpu);
save_host_msrs(vcpu);
- fs_selector = kvm_read_fs();
- gs_selector = kvm_read_gs();
+ savesegment(fs, fs_selector);
+ savesegment(gs, gs_selector);
ldt_selector = kvm_read_ldt();
svm->vmcb->save.cr2 = vcpu->arch.cr2;
/* required for live migration with NPT */
vcpu->arch.regs[VCPU_REGS_RSP] = svm->vmcb->save.rsp;
vcpu->arch.regs[VCPU_REGS_RIP] = svm->vmcb->save.rip;
- kvm_load_fs(fs_selector);
- kvm_load_gs(gs_selector);
- kvm_load_ldt(ldt_selector);
load_host_msrs(vcpu);
+ loadsegment(fs, fs_selector);
+#ifdef CONFIG_X86_64
+ load_gs_index(gs_selector);
+ wrmsrl(MSR_KERNEL_GS_BASE, current->thread.gs);
+#else
+ loadsegment(gs, gs_selector);
+#endif
+ kvm_load_ldt(ldt_selector);
reload_tss(vcpu);
*/
vmx->host_state.ldt_sel = kvm_read_ldt();
vmx->host_state.gs_ldt_reload_needed = vmx->host_state.ldt_sel;
- vmx->host_state.fs_sel = kvm_read_fs();
+ savesegment(fs, vmx->host_state.fs_sel);
if (!(vmx->host_state.fs_sel & 7)) {
vmcs_write16(HOST_FS_SELECTOR, vmx->host_state.fs_sel);
vmx->host_state.fs_reload_needed = 0;
vmcs_write16(HOST_FS_SELECTOR, 0);
vmx->host_state.fs_reload_needed = 1;
}
- vmx->host_state.gs_sel = kvm_read_gs();
+ savesegment(gs, vmx->host_state.gs_sel);
if (!(vmx->host_state.gs_sel & 7))
vmcs_write16(HOST_GS_SELECTOR, vmx->host_state.gs_sel);
else {
static void __vmx_load_host_state(struct vcpu_vmx *vmx)
{
- unsigned long flags;
-
if (!vmx->host_state.loaded)
return;
++vmx->vcpu.stat.host_state_reload;
vmx->host_state.loaded = 0;
if (vmx->host_state.fs_reload_needed)
- kvm_load_fs(vmx->host_state.fs_sel);
+ loadsegment(fs, vmx->host_state.fs_sel);
if (vmx->host_state.gs_ldt_reload_needed) {
kvm_load_ldt(vmx->host_state.ldt_sel);
- /*
- * If we have to reload gs, we must take care to
- * preserve our gs base.
- */
- local_irq_save(flags);
- kvm_load_gs(vmx->host_state.gs_sel);
#ifdef CONFIG_X86_64
- wrmsrl(MSR_GS_BASE, vmcs_readl(HOST_GS_BASE));
+ load_gs_index(vmx->host_state.gs_sel);
+ wrmsrl(MSR_KERNEL_GS_BASE, current->thread.gs);
+#else
+ loadsegment(gs, vmx->host_state.gs_sel);
#endif
- local_irq_restore(flags);
}
reload_tss();
#ifdef CONFIG_X86_64
vmcs_write16(HOST_CS_SELECTOR, __KERNEL_CS); /* 22.2.4 */
vmcs_write16(HOST_DS_SELECTOR, __KERNEL_DS); /* 22.2.4 */
vmcs_write16(HOST_ES_SELECTOR, __KERNEL_DS); /* 22.2.4 */
- vmcs_write16(HOST_FS_SELECTOR, kvm_read_fs()); /* 22.2.4 */
- vmcs_write16(HOST_GS_SELECTOR, kvm_read_gs()); /* 22.2.4 */
+ vmcs_write16(HOST_FS_SELECTOR, 0); /* 22.2.4 */
+ vmcs_write16(HOST_GS_SELECTOR, 0); /* 22.2.4 */
vmcs_write16(HOST_SS_SELECTOR, __KERNEL_DS); /* 22.2.4 */
#ifdef CONFIG_X86_64
rdmsrl(MSR_FS_BASE, a);
}
/*
- * For a single GDT entry which changes, we do the lazy thing: alter our GDT,
- * then tell the Host to reload the entire thing. This operation is so rare
- * that this naive implementation is reasonable.
+ * For a single GDT entry which changes, we simply change our copy and
+ * then tell the host about it.
*/
static void lguest_write_gdt_entry(struct desc_struct *dt, int entrynum,
const void *desc, int type)
}
/*
- * OK, I lied. There are three "thread local storage" GDT entries which change
+ * There are three "thread local storage" GDT entries which change
* on every context switch (these three entries are how glibc implements
- * __thread variables). So we have a hypercall specifically for this case.
+ * __thread variables). As an optimization, we have a hypercall
+ * specifically for this case.
+ *
+ * Wouldn't it be nicer to have a general LOAD_GDT_ENTRIES hypercall
+ * which took a range of entries?
*/
static void lguest_load_tls(struct thread_struct *t, unsigned int cpu)
{
return -1;
}
- for_each_node_mask(i, nodes_parsed)
- e820_register_active_regions(i, nodes[i].start >> PAGE_SHIFT,
- nodes[i].end >> PAGE_SHIFT);
+ for (i = 0; i < num_node_memblks; i++)
+ e820_register_active_regions(memblk_nodeid[i],
+ node_memblk_range[i].start >> PAGE_SHIFT,
+ node_memblk_range[i].end >> PAGE_SHIFT);
+
/* for out of order entries in SRAT */
sort_node_map();
if (!nodes_cover_memory(nodes)) {
case 14:
*cpu_type = "i386/core";
break;
- case 15: case 23:
+ case 0x0f:
+ case 0x16:
+ case 0x17:
+ case 0x1d:
*cpu_type = "i386/core_2";
break;
case 0x1a:
__init void xen_hvm_init_time_ops(void)
{
/* vector callback is needed otherwise we cannot receive interrupts
- * on cpu > 0 */
- if (!xen_have_vector_callback && num_present_cpus() > 1)
+ * on cpu > 0 and at this point we don't know how many cpus are
+ * available */
+ if (!xen_have_vector_callback)
return;
if (!xen_feature(XENFEAT_hvm_safe_pvclock)) {
printk(KERN_INFO "Xen doesn't support pvclock on HVM,"
return PTR_ERR(bio);
if (rq_data_dir(rq) == WRITE)
- bio->bi_rw |= (1 << REQ_WRITE);
+ bio->bi_rw |= REQ_WRITE;
if (do_copy)
rq->cmd_flags |= REQ_COPY_USER;
if (!rq_mergeable(req) || !rq_mergeable(next))
return 0;
+ /*
+ * Don't merge file system requests and discard requests
+ */
+ if ((req->cmd_flags & REQ_DISCARD) != (next->cmd_flags & REQ_DISCARD))
+ return 0;
+
+ /*
+ * Don't merge discard requests and secure discard requests
+ */
+ if ((req->cmd_flags & REQ_SECURE) != (next->cmd_flags & REQ_SECURE))
+ return 0;
+
/*
* not contiguous
*/
/*
* fill in all the output members
*/
- hdr->device_status = status_byte(rq->errors);
+ hdr->device_status = rq->errors & 0xff;
hdr->transport_status = host_byte(rq->errors);
hdr->driver_status = driver_byte(rq->errors);
hdr->info = 0;
*/
atomic_set(&cfqg->ref, 1);
- /* Add group onto cgroup list */
- sscanf(dev_name(bdi->dev), "%u:%u", &major, &minor);
- cfq_blkiocg_add_blkio_group(blkcg, &cfqg->blkg, (void *)cfqd,
+ /*
+ * Add group onto cgroup list. It might happen that bdi->dev is
+ * not initiliazed yet. Initialize this new group without major
+ * and minor info and this info will be filled in once a new thread
+ * comes for IO. See code above.
+ */
+ if (bdi->dev) {
+ sscanf(dev_name(bdi->dev), "%u:%u", &major, &minor);
+ cfq_blkiocg_add_blkio_group(blkcg, &cfqg->blkg, (void *)cfqd,
MKDEV(major, minor));
+ } else
+ cfq_blkiocg_add_blkio_group(blkcg, &cfqg->blkg, (void *)cfqd,
+ 0);
+
cfqg->weight = blkcg_get_weight(blkcg, cfqg->blkg.dev);
/* Add group on cfqd list */
}
}
kobject_uevent(&e->kobj, KOBJ_ADD);
+ e->registered = 1;
}
return error;
}
{
kobject_uevent(&e->kobj, KOBJ_REMOVE);
kobject_del(&e->kobj);
+ e->registered = 0;
}
void elv_unregister_queue(struct request_queue *q)
spin_unlock_irq(q->queue_lock);
- __elv_unregister_queue(old_elevator);
+ if (old_elevator->registered) {
+ __elv_unregister_queue(old_elevator);
- err = elv_register_queue(q);
- if (err)
- goto fail_register;
+ err = elv_register_queue(q);
+ if (err)
+ goto fail_register;
+ }
/*
* finally exit old elevator and turn off BYPASS.
config ACPI_PROCFS_POWER
bool "Deprecated power /proc/acpi directories"
depends on PROC_FS
- default y
help
For backwards compatibility, this option allows
deprecated power /proc/acpi/ directories to exist, even when
To compile this driver as a module, choose M here:
the module will be called power-meter.
-config ACPI_SYSFS_POWER
- bool "Future power /sys interface"
- select POWER_SUPPLY
- default y
- help
- Say N to disable power /sys interface
-
config ACPI_EC_DEBUGFS
tristate "EC read/write access through /sys/kernel/debug/ec"
default n
Be aware that using this interface can confuse your Embedded
Controller in a way that a normal reboot is not enough. You then
- have to power of your system, and remove the laptop battery for
+ have to power off your system, and remove the laptop battery for
some seconds.
An Embedded Controller typically is available on laptops and reads
sensor values like battery state and temperature.
config ACPI_AC
tristate "AC Adapter"
depends on X86
+ select POWER_SUPPLY
default y
help
This driver supports the AC Adapter object, which indicates
config ACPI_BATTERY
tristate "Battery"
depends on X86
+ select POWER_SUPPLY
default y
help
This driver adds support for battery information through
config ACPI_SBS
tristate "Smart Battery System"
depends on X86
+ select POWER_SUPPLY
help
This driver supports the Smart Battery System, another
type of access to battery information, found on some laptops.
#include <linux/proc_fs.h>
#include <linux/seq_file.h>
#endif
-#ifdef CONFIG_ACPI_SYSFS_POWER
#include <linux/power_supply.h>
-#endif
#include <acpi/acpi_bus.h>
#include <acpi/acpi_drivers.h>
};
struct acpi_ac {
-#ifdef CONFIG_ACPI_SYSFS_POWER
struct power_supply charger;
-#endif
struct acpi_device * device;
unsigned long long state;
};
.release = single_release,
};
#endif
-#ifdef CONFIG_ACPI_SYSFS_POWER
static int get_ac_property(struct power_supply *psy,
enum power_supply_property psp,
union power_supply_propval *val)
static enum power_supply_property ac_props[] = {
POWER_SUPPLY_PROP_ONLINE,
};
-#endif
/* --------------------------------------------------------------------------
AC Adapter Management
-------------------------------------------------------------------------- */
dev_name(&device->dev), event,
(u32) ac->state);
acpi_notifier_call_chain(device, event, (u32) ac->state);
-#ifdef CONFIG_ACPI_SYSFS_POWER
kobject_uevent(&ac->charger.dev->kobj, KOBJ_CHANGE);
-#endif
}
return;
#endif
if (result)
goto end;
-#ifdef CONFIG_ACPI_SYSFS_POWER
ac->charger.name = acpi_device_bid(device);
ac->charger.type = POWER_SUPPLY_TYPE_MAINS;
ac->charger.properties = ac_props;
ac->charger.num_properties = ARRAY_SIZE(ac_props);
ac->charger.get_property = get_ac_property;
power_supply_register(&ac->device->dev, &ac->charger);
-#endif
printk(KERN_INFO PREFIX "%s [%s] (%s)\n",
acpi_device_name(device), acpi_device_bid(device),
old_state = ac->state;
if (acpi_ac_get_state(ac))
return 0;
-#ifdef CONFIG_ACPI_SYSFS_POWER
if (old_state != ac->state)
kobject_uevent(&ac->charger.dev->kobj, KOBJ_CHANGE);
-#endif
return 0;
}
ac = acpi_driver_data(device);
-#ifdef CONFIG_ACPI_SYSFS_POWER
if (ac->charger.dev)
power_supply_unregister(&ac->charger);
-#endif
#ifdef CONFIG_ACPI_PROCFS_POWER
acpi_ac_remove_fs(device);
#endif
device_remove_file(&device->dev, &dev_attr_rrtime);
}
-/* Query firmware how many CPUs should be idle */
-static int acpi_pad_pur(acpi_handle handle, int *num_cpus)
+/*
+ * Query firmware how many CPUs should be idle
+ * return -1 on failure
+ */
+static int acpi_pad_pur(acpi_handle handle)
{
struct acpi_buffer buffer = {ACPI_ALLOCATE_BUFFER, NULL};
union acpi_object *package;
- int rev, num, ret = -EINVAL;
+ int num = -1;
if (ACPI_FAILURE(acpi_evaluate_object(handle, "_PUR", NULL, &buffer)))
- return -EINVAL;
+ return num;
if (!buffer.length || !buffer.pointer)
- return -EINVAL;
+ return num;
package = buffer.pointer;
- if (package->type != ACPI_TYPE_PACKAGE || package->package.count != 2)
- goto out;
- rev = package->package.elements[0].integer.value;
- num = package->package.elements[1].integer.value;
- if (rev != 1 || num < 0)
- goto out;
- *num_cpus = num;
- ret = 0;
-out:
+
+ if (package->type == ACPI_TYPE_PACKAGE &&
+ package->package.count == 2 &&
+ package->package.elements[0].integer.value == 1) /* rev 1 */
+
+ num = package->package.elements[1].integer.value;
+
kfree(buffer.pointer);
- return ret;
+ return num;
}
/* Notify firmware how many CPUs are idle */
uint32_t idle_cpus;
mutex_lock(&isolated_cpus_lock);
- if (acpi_pad_pur(handle, &num_cpus)) {
+ num_cpus = acpi_pad_pur(handle);
+ if (num_cpus < 0) {
mutex_unlock(&isolated_cpus_lock);
return;
}
excreate.o exmisc.o exoparg2.o exregion.o exstore.o exutils.o \
exdump.o exmutex.o exoparg3.o exresnte.o exstoren.o exdebug.o
-acpi-y += hwacpi.o hwgpe.o hwregs.o hwsleep.o hwxface.o hwvalid.o
+acpi-y += hwacpi.o hwgpe.o hwregs.o hwsleep.o hwxface.o hwvalid.o hwpci.o
acpi-$(ACPI_FUTURE_USAGE) += hwtimer.o
acpi-y += utalloc.o utdebug.o uteval.o utinit.o utmisc.o utxface.o \
utcopy.o utdelete.o utglobal.o utmath.o utobject.o \
- utstate.o utmutex.o utobject.o utresrc.o utlock.o utids.o
+ utstate.o utmutex.o utobject.o utresrc.o utlock.o utids.o \
+ utosi.o utxferror.o
acpi_status
acpi_db_display_objects(char *obj_type_arg, char *display_count_arg);
+void acpi_db_display_interfaces(char *action_arg, char *interface_name_arg);
+
acpi_status acpi_db_find_name_in_namespace(char *name_arg);
void acpi_db_set_scope(char *name);
u32 acpi_current_gpe_count;
u32 acpi_gbl_trace_flags;
acpi_name acpi_gbl_trace_method_name;
+u8 acpi_gbl_system_awake_and_running;
#endif
ACPI_EXTERN u8 acpi_gbl_integer_byte_width;
ACPI_EXTERN u8 acpi_gbl_integer_nybble_width;
+/* Mutex for _OSI support */
+
+ACPI_EXTERN acpi_mutex acpi_gbl_osi_mutex;
+
/* Reader/Writer lock is used for namespace walk and dynamic table unload */
ACPI_EXTERN struct acpi_rw_lock acpi_gbl_namespace_rw_lock;
ACPI_EXTERN acpi_tbl_handler acpi_gbl_table_handler;
ACPI_EXTERN void *acpi_gbl_table_handler_context;
ACPI_EXTERN struct acpi_walk_state *acpi_gbl_breakpoint_walk;
+ACPI_EXTERN acpi_interface_handler acpi_gbl_interface_handler;
/* Owner ID support */
ACPI_EXTERN u8 acpi_gbl_step_to_next_call;
ACPI_EXTERN u8 acpi_gbl_acpi_hardware_present;
ACPI_EXTERN u8 acpi_gbl_events_initialized;
-ACPI_EXTERN u8 acpi_gbl_system_awake_and_running;
ACPI_EXTERN u8 acpi_gbl_osi_data;
+ACPI_EXTERN struct acpi_interface_info *acpi_gbl_supported_interfaces;
#ifndef DEFINE_ACPI_GLOBALS
struct acpi_gpe_block_info *gpe_block,
void *context);
+/*
+ * hwpci - PCI configuration support
+ */
+acpi_status
+acpi_hw_derive_pci_id(struct acpi_pci_id *pci_id,
+ acpi_handle root_pci_device, acpi_handle pci_region);
+
#ifdef ACPI_FUTURE_USAGE
/*
* hwtimer - ACPI Timer prototypes
ACPI_BITMASK_POWER_BUTTON_STATUS | \
ACPI_BITMASK_SLEEP_BUTTON_STATUS | \
ACPI_BITMASK_RT_CLOCK_STATUS | \
+ ACPI_BITMASK_PCIEXP_WAKE_STATUS | \
ACPI_BITMASK_WAKE_STATUS)
#define ACPI_BITMASK_TIMER_ENABLE 0x0001
#define ACPI_OSI_WIN_VISTA 0x07
#define ACPI_OSI_WINSRV_2008 0x08
#define ACPI_OSI_WIN_VISTA_SP1 0x09
-#define ACPI_OSI_WIN_7 0x0A
+#define ACPI_OSI_WIN_VISTA_SP2 0x0A
+#define ACPI_OSI_WIN_7 0x0B
#define ACPI_ALWAYS_ILLEGAL 0x00
struct acpi_interface_info {
char *name;
+ struct acpi_interface_info *next;
+ u8 flags;
u8 value;
};
+#define ACPI_OSI_INVALID 0x01
+#define ACPI_OSI_DYNAMIC 0x02
+
struct acpi_port_info {
char *name;
u16 start;
struct acpi_db_method_info {
acpi_handle main_thread_gate;
acpi_handle thread_complete_gate;
- u32 *threads;
+ acpi_thread_id *threads;
u32 num_threads;
u32 num_created;
u32 num_completed;
* the plist contains a set of parens to allow variable-length lists.
* These macros are used for both the debug and non-debug versions of the code.
*/
-#define ACPI_ERROR_NAMESPACE(s, e) acpi_ns_report_error (AE_INFO, s, e);
-#define ACPI_ERROR_METHOD(s, n, p, e) acpi_ns_report_method_error (AE_INFO, s, n, p, e);
+#define ACPI_ERROR_NAMESPACE(s, e) acpi_ut_namespace_error (AE_INFO, s, e);
+#define ACPI_ERROR_METHOD(s, n, p, e) acpi_ut_method_error (AE_INFO, s, n, p, e);
#define ACPI_WARN_PREDEFINED(plist) acpi_ut_predefined_warning plist
#define ACPI_INFO_PREDEFINED(plist) acpi_ut_predefined_info plist
u32 acpi_ns_local(acpi_object_type type);
-void
-acpi_ns_report_error(const char *module_name,
- u32 line_number,
- const char *internal_name, acpi_status lookup_status);
-
-void
-acpi_ns_report_method_error(const char *module_name,
- u32 line_number,
- const char *message,
- struct acpi_namespace_node *node,
- const char *path, acpi_status lookup_status);
-
void
acpi_ns_print_node_pathname(struct acpi_namespace_node *node, const char *msg);
u32 base_byte_offset; /* Byte offset within containing object */\
u32 value; /* Value to store into the Bank or Index register */\
u8 start_field_bit_offset;/* Bit offset within first field datum (0-63) */\
- u8 access_bit_width; /* Read/Write size in bits (8-64) */
+
struct acpi_object_field_common { /* COMMON FIELD (for BUFFER, REGION, BANK, and INDEX fields) */
ACPI_OBJECT_COMMON_HEADER ACPI_COMMON_FIELD_INFO union acpi_operand_object *region_obj; /* Parent Operation Region object (REGION/BANK fields only) */
/*
* uteval - object evaluation
*/
-acpi_status acpi_ut_osi_implementation(struct acpi_walk_state *walk_state);
-
acpi_status
acpi_ut_evaluate_object(struct acpi_namespace_node *prefix_node,
char *path,
acpi_status
acpi_ut_get_object_size(union acpi_operand_object *obj, acpi_size * obj_length);
+/*
+ * utosi - Support for the _OSI predefined control method
+ */
+acpi_status acpi_ut_initialize_interfaces(void);
+
+void acpi_ut_interface_terminate(void);
+
+acpi_status acpi_ut_install_interface(acpi_string interface_name);
+
+acpi_status acpi_ut_remove_interface(acpi_string interface_name);
+
+struct acpi_interface_info *acpi_ut_get_interface(acpi_string interface_name);
+
+acpi_status acpi_ut_osi_implementation(struct acpi_walk_state *walk_state);
+
/*
* utstate - Generic state creation/cache routines
*/
acpi_status acpi_ut_strtoul64(char *string, u32 base, u64 * ret_integer);
-void ACPI_INTERNAL_VAR_XFACE
-acpi_ut_predefined_warning(const char *module_name,
- u32 line_number,
- char *pathname,
- u8 node_flags, const char *format, ...);
-
-void ACPI_INTERNAL_VAR_XFACE
-acpi_ut_predefined_info(const char *module_name,
- u32 line_number,
- char *pathname, u8 node_flags, const char *format, ...);
-
/* Values for Base above (16=Hex, 10=Decimal) */
#define ACPI_ANY_BASE 0
acpi_ut_create_list(char *list_name,
u16 object_size, struct acpi_memory_list **return_cache);
-#endif
+#endif /* ACPI_DBG_TRACK_ALLOCATIONS */
+
+/*
+ * utxferror - various error/warning output functions
+ */
+void ACPI_INTERNAL_VAR_XFACE
+acpi_ut_predefined_warning(const char *module_name,
+ u32 line_number,
+ char *pathname,
+ u8 node_flags, const char *format, ...);
+
+void ACPI_INTERNAL_VAR_XFACE
+acpi_ut_predefined_info(const char *module_name,
+ u32 line_number,
+ char *pathname, u8 node_flags, const char *format, ...);
+
+void
+acpi_ut_namespace_error(const char *module_name,
+ u32 line_number,
+ const char *internal_name, acpi_status lookup_status);
+
+void
+acpi_ut_method_error(const char *module_name,
+ u32 line_number,
+ const char *message,
+ struct acpi_namespace_node *node,
+ const char *path, acpi_status lookup_status);
#endif /* _ACUTILS_H */
acpi_os_release_mutex(method_desc->method.
mutex->mutex.os_mutex);
- method_desc->method.mutex->mutex.thread_id = NULL;
+ method_desc->method.mutex->mutex.thread_id = 0;
}
}
* we must enter this object into the namespace. The created
* object is temporary and will be deleted upon completion of
* the execution of this method.
+ *
+ * Note 10/2010: Except for the Scope() op. This opcode does
+ * not actually create a new object, it refers to an existing
+ * object. However, for Scope(), we want to indeed open a
+ * new scope.
*/
- status = acpi_ds_load2_begin_op(walk_state, NULL);
+ if (op->common.aml_opcode != AML_SCOPE_OP) {
+ status =
+ acpi_ds_load2_begin_op(walk_state, NULL);
+ } else {
+ status =
+ acpi_ds_scope_stack_push(op->named.node,
+ op->named.node->
+ type, walk_state);
+ if (ACPI_FAILURE(status)) {
+ return_ACPI_STATUS(status);
+ }
+ }
}
-
break;
case AML_CLASS_EXECUTE:
acpi_gbl_global_lock_acquired = FALSE;
/* Release the local GL mutex */
- acpi_ev_global_lock_thread_id = NULL;
+ acpi_ev_global_lock_thread_id = 0;
acpi_ev_global_lock_acquired = 0;
acpi_os_release_mutex(acpi_gbl_global_lock_mutex->mutex.os_mutex);
return_ACPI_STATUS(status);
}
/*
- * Get the PCI device and function numbers from the _ADR object contained
- * in the parent's scope.
+ * Get the PCI device and function numbers from the _ADR object
+ * contained in the parent's scope.
*/
status = acpi_ut_evaluate_numeric_object(METHOD_NAME__ADR,
pci_device_node, &pci_value);
pci_id->bus = ACPI_LOWORD(pci_value);
}
- /* Complete this device's pci_id */
+ /* Complete/update the PCI ID for this device */
- acpi_os_derive_pci_id(pci_root_node, region_obj->region.node, &pci_id);
+ status =
+ acpi_hw_derive_pci_id(pci_id, pci_root_node,
+ region_obj->region.node);
+ if (ACPI_FAILURE(status)) {
+ ACPI_FREE(pci_id);
+ return_ACPI_STATUS(status);
+ }
*region_context = pci_id;
return_ACPI_STATUS(AE_OK);
*
* DESCRIPTION: Install a handler for all op_regions of a given space_id.
*
+ * NOTE: This function should only be called after acpi_enable_subsystem has
+ * been called. This is because any _REG methods associated with the Space ID
+ * are executed here, and these methods can only be safely executed after
+ * the default handlers have been installed and the hardware has been
+ * initialized (via acpi_enable_subsystem.)
+ *
******************************************************************************/
acpi_status
acpi_install_address_space_handler(acpi_handle device,
}
/*
- * Exit now for SMBus or IPMI address space, it has a non-linear address space
- * and the request cannot be directly validated
+ * Exit now for SMBus or IPMI address space, it has a non-linear
+ * address space and the request cannot be directly validated
*/
if (rgn_desc->region.space_id == ACPI_ADR_SPACE_SMBUS ||
rgn_desc->region.space_id == ACPI_ADR_SPACE_IPMI) {
* (Region length is specified in bytes)
*/
if (rgn_desc->region.length <
- (obj_desc->common_field.base_byte_offset +
- field_datum_byte_offset +
+ (obj_desc->common_field.base_byte_offset + field_datum_byte_offset +
obj_desc->common_field.access_byte_width)) {
if (acpi_gbl_enable_interpreter_slack) {
/*
u32 buffer_tail_bits;
u32 datum_count;
u32 field_datum_count;
+ u32 access_bit_width;
u32 i;
ACPI_FUNCTION_TRACE(ex_extract_from_field);
return_ACPI_STATUS(AE_BUFFER_OVERFLOW);
}
+
ACPI_MEMSET(buffer, 0, buffer_length);
+ access_bit_width = ACPI_MUL_8(obj_desc->common_field.access_byte_width);
+
+ /* Handle the simple case here */
+
+ if ((obj_desc->common_field.start_field_bit_offset == 0) &&
+ (obj_desc->common_field.bit_length == access_bit_width)) {
+ status = acpi_ex_field_datum_io(obj_desc, 0, buffer, ACPI_READ);
+ return_ACPI_STATUS(status);
+ }
+
+/* TBD: Move to common setup code */
+
+ /* Field algorithm is limited to sizeof(u64), truncate if needed */
+
+ if (obj_desc->common_field.access_byte_width > sizeof(u64)) {
+ obj_desc->common_field.access_byte_width = sizeof(u64);
+ access_bit_width = sizeof(u64) * 8;
+ }
/* Compute the number of datums (access width data items) */
- datum_count = ACPI_ROUND_UP_TO(obj_desc->common_field.bit_length,
- obj_desc->common_field.access_bit_width);
+ datum_count =
+ ACPI_ROUND_UP_TO(obj_desc->common_field.bit_length,
+ access_bit_width);
+
field_datum_count = ACPI_ROUND_UP_TO(obj_desc->common_field.bit_length +
obj_desc->common_field.
start_field_bit_offset,
- obj_desc->common_field.
access_bit_width);
/* Priming read from the field */
* This avoids the differences in behavior between different compilers
* concerning shift values larger than the target data width.
*/
- if ((obj_desc->common_field.access_bit_width -
- obj_desc->common_field.start_field_bit_offset) <
+ if (access_bit_width -
+ obj_desc->common_field.start_field_bit_offset <
ACPI_INTEGER_BIT_SIZE) {
merged_datum |=
- raw_datum << (obj_desc->common_field.
- access_bit_width -
+ raw_datum << (access_bit_width -
obj_desc->common_field.
start_field_bit_offset);
}
/* Mask off any extra bits in the last datum */
- buffer_tail_bits = obj_desc->common_field.bit_length %
- obj_desc->common_field.access_bit_width;
+ buffer_tail_bits = obj_desc->common_field.bit_length % access_bit_width;
if (buffer_tail_bits) {
merged_datum &= ACPI_MASK_BITS_ABOVE(buffer_tail_bits);
}
acpi_ex_insert_into_field(union acpi_operand_object *obj_desc,
void *buffer, u32 buffer_length)
{
+ void *new_buffer;
acpi_status status;
u64 mask;
u64 width_mask;
u32 buffer_tail_bits;
u32 datum_count;
u32 field_datum_count;
- u32 i;
+ u32 access_bit_width;
u32 required_length;
- void *new_buffer;
+ u32 i;
ACPI_FUNCTION_TRACE(ex_insert_into_field);
buffer_length = required_length;
}
+/* TBD: Move to common setup code */
+
+ /* Algo is limited to sizeof(u64), so cut the access_byte_width */
+ if (obj_desc->common_field.access_byte_width > sizeof(u64)) {
+ obj_desc->common_field.access_byte_width = sizeof(u64);
+ }
+
+ access_bit_width = ACPI_MUL_8(obj_desc->common_field.access_byte_width);
+
/*
* Create the bitmasks used for bit insertion.
* Note: This if/else is used to bypass compiler differences with the
* shift operator
*/
- if (obj_desc->common_field.access_bit_width == ACPI_INTEGER_BIT_SIZE) {
+ if (access_bit_width == ACPI_INTEGER_BIT_SIZE) {
width_mask = ACPI_UINT64_MAX;
} else {
- width_mask =
- ACPI_MASK_BITS_ABOVE(obj_desc->common_field.
- access_bit_width);
+ width_mask = ACPI_MASK_BITS_ABOVE(access_bit_width);
}
mask = width_mask &
/* Compute the number of datums (access width data items) */
datum_count = ACPI_ROUND_UP_TO(obj_desc->common_field.bit_length,
- obj_desc->common_field.access_bit_width);
+ access_bit_width);
field_datum_count = ACPI_ROUND_UP_TO(obj_desc->common_field.bit_length +
obj_desc->common_field.
start_field_bit_offset,
- obj_desc->common_field.
access_bit_width);
/* Get initial Datum from the input buffer */
* This avoids the differences in behavior between different compilers
* concerning shift values larger than the target data width.
*/
- if ((obj_desc->common_field.access_bit_width -
+ if ((access_bit_width -
obj_desc->common_field.start_field_bit_offset) <
ACPI_INTEGER_BIT_SIZE) {
merged_datum =
- raw_datum >> (obj_desc->common_field.
- access_bit_width -
+ raw_datum >> (access_bit_width -
obj_desc->common_field.
start_field_bit_offset);
} else {
ACPI_MEMCPY(&raw_datum, ((char *)buffer) + buffer_offset,
ACPI_MIN(obj_desc->common_field.access_byte_width,
buffer_length - buffer_offset));
+
merged_datum |=
raw_datum << obj_desc->common_field.start_field_bit_offset;
}
buffer_tail_bits = (obj_desc->common_field.bit_length +
obj_desc->common_field.start_field_bit_offset) %
- obj_desc->common_field.access_bit_width;
+ access_bit_width;
if (buffer_tail_bits) {
mask &= ACPI_MASK_BITS_ABOVE(buffer_tail_bits);
}
/* Clear mutex info */
- obj_desc->mutex.thread_id = NULL;
+ obj_desc->mutex.thread_id = 0;
return_ACPI_STATUS(status);
}
if ((owner_thread->thread_id != walk_state->thread->thread_id) &&
(obj_desc != acpi_gbl_global_lock_mutex)) {
ACPI_ERROR((AE_INFO,
- "Thread %p cannot release Mutex [%4.4s] acquired by thread %p",
- ACPI_CAST_PTR(void, walk_state->thread->thread_id),
+ "Thread %u cannot release Mutex [%4.4s] acquired by thread %u",
+ (u32)walk_state->thread->thread_id,
acpi_ut_get_node_name(obj_desc->mutex.node),
- ACPI_CAST_PTR(void, owner_thread->thread_id)));
+ (u32)owner_thread->thread_id));
return_ACPI_STATUS(AE_AML_NOT_OWNER);
}
/* Mark mutex unowned */
obj_desc->mutex.owner_thread = NULL;
- obj_desc->mutex.thread_id = NULL;
+ obj_desc->mutex.thread_id = 0;
/* Update Thread sync_level (Last mutex is the important one) */
return_ACPI_STATUS(AE_AML_OPERAND_VALUE);
}
- /* Setup width (access granularity) fields */
+ /* Setup width (access granularity) fields (values are: 1, 2, 4, 8) */
obj_desc->common_field.access_byte_width = (u8)
- ACPI_DIV_8(access_bit_width); /* 1, 2, 4, 8 */
-
- obj_desc->common_field.access_bit_width = (u8) access_bit_width;
+ ACPI_DIV_8(access_bit_width);
/*
* base_byte_offset is the address of the start of the field within the
{
union acpi_operand_object *obj_desc;
union acpi_operand_object *second_desc = NULL;
- u32 type;
acpi_status status;
+ u32 access_byte_width;
+ u32 type;
ACPI_FUNCTION_TRACE(ex_prep_field_value);
type = acpi_ns_get_type(info->region_node);
if (type != ACPI_TYPE_REGION) {
ACPI_ERROR((AE_INFO,
- "Needed Region, found type 0x%X (%s)",
- type, acpi_ut_get_type_name(type)));
+ "Needed Region, found type 0x%X (%s)", type,
+ acpi_ut_get_type_name(type)));
return_ACPI_STATUS(AE_AML_OPERAND_TYPE);
}
/* Initialize areas of the object that are common to all fields */
obj_desc->common_field.node = info->field_node;
- status = acpi_ex_prep_common_field_object(obj_desc, info->field_flags,
+ status = acpi_ex_prep_common_field_object(obj_desc,
+ info->field_flags,
info->attribute,
info->field_bit_position,
info->field_bit_length);
obj_desc->field.region_obj =
acpi_ns_get_attached_object(info->region_node);
- /* An additional reference for the container */
+ /* Allow full data read from EC address space */
- acpi_ut_add_reference(obj_desc->field.region_obj);
+ if ((obj_desc->field.region_obj->region.space_id ==
+ ACPI_ADR_SPACE_EC)
+ && (obj_desc->common_field.bit_length > 8)) {
+ access_byte_width =
+ ACPI_ROUND_BITS_UP_TO_BYTES(obj_desc->common_field.
+ bit_length);
+
+ /* Maximum byte width supported is 255 */
- /* allow full data read from EC address space */
- if (obj_desc->field.region_obj->region.space_id ==
- ACPI_ADR_SPACE_EC) {
- if (obj_desc->common_field.bit_length > 8) {
- unsigned width =
- ACPI_ROUND_BITS_UP_TO_BYTES(
- obj_desc->common_field.bit_length);
- // access_bit_width is u8, don't overflow it
- if (width > 8)
- width = 8;
+ if (access_byte_width < 256) {
obj_desc->common_field.access_byte_width =
- width;
- obj_desc->common_field.access_bit_width =
- 8 * width;
+ (u8)access_byte_width;
}
}
+ /* An additional reference for the container */
+
+ acpi_ut_add_reference(obj_desc->field.region_obj);
ACPI_DEBUG_PRINT((ACPI_DB_BFIELD,
"RegionField: BitOff %X, Off %X, Gran %X, Region %p\n",
acpi_status status = AE_OK;
struct acpi_pci_id *pci_id;
u16 pci_register;
- u32 value32;
ACPI_FUNCTION_TRACE(ex_pci_config_space_handler);
case ACPI_READ:
status = acpi_os_read_pci_configuration(pci_id, pci_register,
- &value32, bit_width);
- *value = value32;
+ value, bit_width);
break;
case ACPI_WRITE:
*
* DESCRIPTION: Reacquire the interpreter execution region from within the
* interpreter code. Failure to enter the interpreter region is a
- * fatal system error. Used in conjuction with
+ * fatal system error. Used in conjunction with
* relinquish_interpreter
*
******************************************************************************/
--- /dev/null
+/*******************************************************************************
+ *
+ * Module Name: hwpci - Obtain PCI bus, device, and function numbers
+ *
+ ******************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2010, Intel Corp.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions, and the following disclaimer,
+ * without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ * substantially similar to the "NO WARRANTY" disclaimer below
+ * ("Disclaimer") and any redistribution must be conditioned upon
+ * including a substantially similar Disclaimer requirement for further
+ * binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ * of any contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+#include <acpi/acpi.h>
+#include "accommon.h"
+
+#define _COMPONENT ACPI_NAMESPACE
+ACPI_MODULE_NAME("hwpci")
+
+/* PCI configuration space values */
+#define PCI_CFG_HEADER_TYPE_REG 0x0E
+#define PCI_CFG_PRIMARY_BUS_NUMBER_REG 0x18
+#define PCI_CFG_SECONDARY_BUS_NUMBER_REG 0x19
+/* PCI header values */
+#define PCI_HEADER_TYPE_MASK 0x7F
+#define PCI_TYPE_BRIDGE 0x01
+#define PCI_TYPE_CARDBUS_BRIDGE 0x02
+typedef struct acpi_pci_device {
+ acpi_handle device;
+ struct acpi_pci_device *next;
+
+} acpi_pci_device;
+
+/* Local prototypes */
+
+static acpi_status
+acpi_hw_build_pci_list(acpi_handle root_pci_device,
+ acpi_handle pci_region,
+ struct acpi_pci_device **return_list_head);
+
+static acpi_status
+acpi_hw_process_pci_list(struct acpi_pci_id *pci_id,
+ struct acpi_pci_device *list_head);
+
+static void acpi_hw_delete_pci_list(struct acpi_pci_device *list_head);
+
+static acpi_status
+acpi_hw_get_pci_device_info(struct acpi_pci_id *pci_id,
+ acpi_handle pci_device,
+ u16 *bus_number, u8 *is_bridge);
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_hw_derive_pci_id
+ *
+ * PARAMETERS: pci_id - Initial values for the PCI ID. May be
+ * modified by this function.
+ * root_pci_device - A handle to a PCI device object. This
+ * object must be a PCI Root Bridge having a
+ * _HID value of either PNP0A03 or PNP0A08
+ * pci_region - A handle to a PCI configuration space
+ * Operation Region being initialized
+ *
+ * RETURN: Status
+ *
+ * DESCRIPTION: This function derives a full PCI ID for a PCI device,
+ * consisting of a Segment number, Bus number, Device number,
+ * and function code.
+ *
+ * The PCI hardware dynamically configures PCI bus numbers
+ * depending on the bus topology discovered during system
+ * initialization. This function is invoked during configuration
+ * of a PCI_Config Operation Region in order to (possibly) update
+ * the Bus/Device/Function numbers in the pci_id with the actual
+ * values as determined by the hardware and operating system
+ * configuration.
+ *
+ * The pci_id parameter is initially populated during the Operation
+ * Region initialization. This function is then called, and is
+ * will make any necessary modifications to the Bus, Device, or
+ * Function number PCI ID subfields as appropriate for the
+ * current hardware and OS configuration.
+ *
+ * NOTE: Created 08/2010. Replaces the previous OSL acpi_os_derive_pci_id
+ * interface since this feature is OS-independent. This module
+ * specifically avoids any use of recursion by building a local
+ * temporary device list.
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_hw_derive_pci_id(struct acpi_pci_id *pci_id,
+ acpi_handle root_pci_device, acpi_handle pci_region)
+{
+ acpi_status status;
+ struct acpi_pci_device *list_head = NULL;
+
+ ACPI_FUNCTION_TRACE(hw_derive_pci_id);
+
+ if (!pci_id) {
+ return_ACPI_STATUS(AE_BAD_PARAMETER);
+ }
+
+ /* Build a list of PCI devices, from pci_region up to root_pci_device */
+
+ status =
+ acpi_hw_build_pci_list(root_pci_device, pci_region, &list_head);
+ if (ACPI_SUCCESS(status)) {
+
+ /* Walk the list, updating the PCI device/function/bus numbers */
+
+ status = acpi_hw_process_pci_list(pci_id, list_head);
+ }
+
+ /* Always delete the list */
+
+ acpi_hw_delete_pci_list(list_head);
+ return_ACPI_STATUS(status);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_hw_build_pci_list
+ *
+ * PARAMETERS: root_pci_device - A handle to a PCI device object. This
+ * object is guaranteed to be a PCI Root
+ * Bridge having a _HID value of either
+ * PNP0A03 or PNP0A08
+ * pci_region - A handle to the PCI configuration space
+ * Operation Region
+ * return_list_head - Where the PCI device list is returned
+ *
+ * RETURN: Status
+ *
+ * DESCRIPTION: Builds a list of devices from the input PCI region up to the
+ * Root PCI device for this namespace subtree.
+ *
+ ******************************************************************************/
+
+static acpi_status
+acpi_hw_build_pci_list(acpi_handle root_pci_device,
+ acpi_handle pci_region,
+ struct acpi_pci_device **return_list_head)
+{
+ acpi_handle current_device;
+ acpi_handle parent_device;
+ acpi_status status;
+ struct acpi_pci_device *list_element;
+ struct acpi_pci_device *list_head = NULL;
+
+ /*
+ * Ascend namespace branch until the root_pci_device is reached, building
+ * a list of device nodes. Loop will exit when either the PCI device is
+ * found, or the root of the namespace is reached.
+ */
+ current_device = pci_region;
+ while (1) {
+ status = acpi_get_parent(current_device, &parent_device);
+ if (ACPI_FAILURE(status)) {
+ return (status);
+ }
+
+ /* Finished when we reach the PCI root device (PNP0A03 or PNP0A08) */
+
+ if (parent_device == root_pci_device) {
+ *return_list_head = list_head;
+ return (AE_OK);
+ }
+
+ list_element = ACPI_ALLOCATE(sizeof(struct acpi_pci_device));
+ if (!list_element) {
+ return (AE_NO_MEMORY);
+ }
+
+ /* Put new element at the head of the list */
+
+ list_element->next = list_head;
+ list_element->device = parent_device;
+ list_head = list_element;
+
+ current_device = parent_device;
+ }
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_hw_process_pci_list
+ *
+ * PARAMETERS: pci_id - Initial values for the PCI ID. May be
+ * modified by this function.
+ * list_head - Device list created by
+ * acpi_hw_build_pci_list
+ *
+ * RETURN: Status
+ *
+ * DESCRIPTION: Walk downward through the PCI device list, getting the device
+ * info for each, via the PCI configuration space and updating
+ * the PCI ID as necessary. Deletes the list during traversal.
+ *
+ ******************************************************************************/
+
+static acpi_status
+acpi_hw_process_pci_list(struct acpi_pci_id *pci_id,
+ struct acpi_pci_device *list_head)
+{
+ acpi_status status = AE_OK;
+ struct acpi_pci_device *info;
+ u16 bus_number;
+ u8 is_bridge = TRUE;
+
+ ACPI_FUNCTION_NAME(hw_process_pci_list);
+
+ ACPI_DEBUG_PRINT((ACPI_DB_OPREGION,
+ "Input PciId: Seg %4.4X Bus %4.4X Dev %4.4X Func %4.4X\n",
+ pci_id->segment, pci_id->bus, pci_id->device,
+ pci_id->function));
+
+ bus_number = pci_id->bus;
+
+ /*
+ * Descend down the namespace tree, collecting PCI device, function,
+ * and bus numbers. bus_number is only important for PCI bridges.
+ * Algorithm: As we descend the tree, use the last valid PCI device,
+ * function, and bus numbers that are discovered, and assign them
+ * to the PCI ID for the target device.
+ */
+ info = list_head;
+ while (info) {
+ status = acpi_hw_get_pci_device_info(pci_id, info->device,
+ &bus_number, &is_bridge);
+ if (ACPI_FAILURE(status)) {
+ return_ACPI_STATUS(status);
+ }
+
+ info = info->next;
+ }
+
+ ACPI_DEBUG_PRINT((ACPI_DB_OPREGION,
+ "Output PciId: Seg %4.4X Bus %4.4X Dev %4.4X Func %4.4X "
+ "Status %X BusNumber %X IsBridge %X\n",
+ pci_id->segment, pci_id->bus, pci_id->device,
+ pci_id->function, status, bus_number, is_bridge));
+
+ return_ACPI_STATUS(AE_OK);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_hw_delete_pci_list
+ *
+ * PARAMETERS: list_head - Device list created by
+ * acpi_hw_build_pci_list
+ *
+ * RETURN: None
+ *
+ * DESCRIPTION: Free the entire PCI list.
+ *
+ ******************************************************************************/
+
+static void acpi_hw_delete_pci_list(struct acpi_pci_device *list_head)
+{
+ struct acpi_pci_device *next;
+ struct acpi_pci_device *previous;
+
+ next = list_head;
+ while (next) {
+ previous = next;
+ next = previous->next;
+ ACPI_FREE(previous);
+ }
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_hw_get_pci_device_info
+ *
+ * PARAMETERS: pci_id - Initial values for the PCI ID. May be
+ * modified by this function.
+ * pci_device - Handle for the PCI device object
+ * bus_number - Where a PCI bridge bus number is returned
+ * is_bridge - Return value, indicates if this PCI
+ * device is a PCI bridge
+ *
+ * RETURN: Status
+ *
+ * DESCRIPTION: Get the device info for a single PCI device object. Get the
+ * _ADR (contains PCI device and function numbers), and for PCI
+ * bridge devices, get the bus number from PCI configuration
+ * space.
+ *
+ ******************************************************************************/
+
+static acpi_status
+acpi_hw_get_pci_device_info(struct acpi_pci_id *pci_id,
+ acpi_handle pci_device,
+ u16 *bus_number, u8 *is_bridge)
+{
+ acpi_status status;
+ acpi_object_type object_type;
+ u64 return_value;
+ u64 pci_value;
+
+ /* We only care about objects of type Device */
+
+ status = acpi_get_type(pci_device, &object_type);
+ if (ACPI_FAILURE(status)) {
+ return (status);
+ }
+
+ if (object_type != ACPI_TYPE_DEVICE) {
+ return (AE_OK);
+ }
+
+ /* We need an _ADR. Ignore device if not present */
+
+ status = acpi_ut_evaluate_numeric_object(METHOD_NAME__ADR,
+ pci_device, &return_value);
+ if (ACPI_FAILURE(status)) {
+ return (AE_OK);
+ }
+
+ /*
+ * From _ADR, get the PCI Device and Function and
+ * update the PCI ID.
+ */
+ pci_id->device = ACPI_HIWORD(ACPI_LODWORD(return_value));
+ pci_id->function = ACPI_LOWORD(ACPI_LODWORD(return_value));
+
+ /*
+ * If the previous device was a bridge, use the previous
+ * device bus number
+ */
+ if (*is_bridge) {
+ pci_id->bus = *bus_number;
+ }
+
+ /*
+ * Get the bus numbers from PCI Config space:
+ *
+ * First, get the PCI header_type
+ */
+ *is_bridge = FALSE;
+ status = acpi_os_read_pci_configuration(pci_id,
+ PCI_CFG_HEADER_TYPE_REG,
+ &pci_value, 8);
+ if (ACPI_FAILURE(status)) {
+ return (status);
+ }
+
+ /* We only care about bridges (1=pci_bridge, 2=card_bus_bridge) */
+
+ pci_value &= PCI_HEADER_TYPE_MASK;
+
+ if ((pci_value != PCI_TYPE_BRIDGE) &&
+ (pci_value != PCI_TYPE_CARDBUS_BRIDGE)) {
+ return (AE_OK);
+ }
+
+ /* Bridge: Get the Primary bus_number */
+
+ status = acpi_os_read_pci_configuration(pci_id,
+ PCI_CFG_PRIMARY_BUS_NUMBER_REG,
+ &pci_value, 8);
+ if (ACPI_FAILURE(status)) {
+ return (status);
+ }
+
+ *is_bridge = TRUE;
+ pci_id->bus = (u16)pci_value;
+
+ /* Bridge: Get the Secondary bus_number */
+
+ status = acpi_os_read_pci_configuration(pci_id,
+ PCI_CFG_SECONDARY_BUS_NUMBER_REG,
+ &pci_value, 8);
+ if (ACPI_FAILURE(status)) {
+ return (status);
+ }
+
+ *bus_number = (u16)pci_value;
+ return (AE_OK);
+}
acpi_ns_repair_ALR(struct acpi_predefined_data *data,
union acpi_operand_object **return_object_ptr);
+static acpi_status
+acpi_ns_repair_CID(struct acpi_predefined_data *data,
+ union acpi_operand_object **return_object_ptr);
+
static acpi_status
acpi_ns_repair_FDE(struct acpi_predefined_data *data,
union acpi_operand_object **return_object_ptr);
+static acpi_status
+acpi_ns_repair_HID(struct acpi_predefined_data *data,
+ union acpi_operand_object **return_object_ptr);
+
static acpi_status
acpi_ns_repair_PSS(struct acpi_predefined_data *data,
union acpi_operand_object **return_object_ptr);
* As necessary:
*
* _ALR: Sort the list ascending by ambient_illuminance
+ * _CID: Strings: uppercase all, remove any leading asterisk
* _FDE: Convert Buffer of BYTEs to a Buffer of DWORDs
* _GTM: Convert Buffer of BYTEs to a Buffer of DWORDs
+ * _HID: Strings: uppercase all, remove any leading asterisk
* _PSS: Sort the list descending by Power
* _TSS: Sort the list descending by Power
*
*/
static const struct acpi_repair_info acpi_ns_repairable_names[] = {
{"_ALR", acpi_ns_repair_ALR},
+ {"_CID", acpi_ns_repair_CID},
{"_FDE", acpi_ns_repair_FDE},
{"_GTM", acpi_ns_repair_FDE}, /* _GTM has same repair as _FDE */
+ {"_HID", acpi_ns_repair_HID},
{"_PSS", acpi_ns_repair_PSS},
{"_TSS", acpi_ns_repair_TSS},
{{0, 0, 0, 0}, NULL} /* Table terminator */
return (AE_OK);
}
+/******************************************************************************
+ *
+ * FUNCTION: acpi_ns_repair_CID
+ *
+ * PARAMETERS: Data - Pointer to validation data structure
+ * return_object_ptr - Pointer to the object returned from the
+ * evaluation of a method or object
+ *
+ * RETURN: Status. AE_OK if object is OK or was repaired successfully
+ *
+ * DESCRIPTION: Repair for the _CID object. If a string, ensure that all
+ * letters are uppercase and that there is no leading asterisk.
+ * If a Package, ensure same for all string elements.
+ *
+ *****************************************************************************/
+
+static acpi_status
+acpi_ns_repair_CID(struct acpi_predefined_data *data,
+ union acpi_operand_object **return_object_ptr)
+{
+ acpi_status status;
+ union acpi_operand_object *return_object = *return_object_ptr;
+ union acpi_operand_object **element_ptr;
+ union acpi_operand_object *original_element;
+ u16 original_ref_count;
+ u32 i;
+
+ /* Check for _CID as a simple string */
+
+ if (return_object->common.type == ACPI_TYPE_STRING) {
+ status = acpi_ns_repair_HID(data, return_object_ptr);
+ return (status);
+ }
+
+ /* Exit if not a Package */
+
+ if (return_object->common.type != ACPI_TYPE_PACKAGE) {
+ return (AE_OK);
+ }
+
+ /* Examine each element of the _CID package */
+
+ element_ptr = return_object->package.elements;
+ for (i = 0; i < return_object->package.count; i++) {
+ original_element = *element_ptr;
+ original_ref_count = original_element->common.reference_count;
+
+ status = acpi_ns_repair_HID(data, element_ptr);
+ if (ACPI_FAILURE(status)) {
+ return (status);
+ }
+
+ /* Take care with reference counts */
+
+ if (original_element != *element_ptr) {
+
+ /* Element was replaced */
+
+ (*element_ptr)->common.reference_count =
+ original_ref_count;
+
+ acpi_ut_remove_reference(original_element);
+ }
+
+ element_ptr++;
+ }
+
+ return (AE_OK);
+}
+
+/******************************************************************************
+ *
+ * FUNCTION: acpi_ns_repair_HID
+ *
+ * PARAMETERS: Data - Pointer to validation data structure
+ * return_object_ptr - Pointer to the object returned from the
+ * evaluation of a method or object
+ *
+ * RETURN: Status. AE_OK if object is OK or was repaired successfully
+ *
+ * DESCRIPTION: Repair for the _HID object. If a string, ensure that all
+ * letters are uppercase and that there is no leading asterisk.
+ *
+ *****************************************************************************/
+
+static acpi_status
+acpi_ns_repair_HID(struct acpi_predefined_data *data,
+ union acpi_operand_object **return_object_ptr)
+{
+ union acpi_operand_object *return_object = *return_object_ptr;
+ union acpi_operand_object *new_string;
+ char *source;
+ char *dest;
+
+ ACPI_FUNCTION_NAME(ns_repair_HID);
+
+ /* We only care about string _HID objects (not integers) */
+
+ if (return_object->common.type != ACPI_TYPE_STRING) {
+ return (AE_OK);
+ }
+
+ if (return_object->string.length == 0) {
+ ACPI_WARN_PREDEFINED((AE_INFO, data->pathname, data->node_flags,
+ "Invalid zero-length _HID or _CID string"));
+
+ /* Return AE_OK anyway, let driver handle it */
+
+ data->flags |= ACPI_OBJECT_REPAIRED;
+ return (AE_OK);
+ }
+
+ /* It is simplest to always create a new string object */
+
+ new_string = acpi_ut_create_string_object(return_object->string.length);
+ if (!new_string) {
+ return (AE_NO_MEMORY);
+ }
+
+ /*
+ * Remove a leading asterisk if present. For some unknown reason, there
+ * are many machines in the field that contains IDs like this.
+ *
+ * Examples: "*PNP0C03", "*ACPI0003"
+ */
+ source = return_object->string.pointer;
+ if (*source == '*') {
+ source++;
+ new_string->string.length--;
+
+ ACPI_DEBUG_PRINT((ACPI_DB_REPAIR,
+ "%s: Removed invalid leading asterisk\n",
+ data->pathname));
+ }
+
+ /*
+ * Copy and uppercase the string. From the ACPI specification:
+ *
+ * A valid PNP ID must be of the form "AAA####" where A is an uppercase
+ * letter and # is a hex digit. A valid ACPI ID must be of the form
+ * "ACPI####" where # is a hex digit.
+ */
+ for (dest = new_string->string.pointer; *source; dest++, source++) {
+ *dest = (char)ACPI_TOUPPER(*source);
+ }
+
+ acpi_ut_remove_reference(return_object);
+ *return_object_ptr = new_string;
+ return (AE_OK);
+}
+
/******************************************************************************
*
* FUNCTION: acpi_ns_repair_TSS
acpi_name acpi_ns_find_parent_name(struct acpi_namespace_node *node_to_search);
#endif
-/*******************************************************************************
- *
- * FUNCTION: acpi_ns_report_error
- *
- * PARAMETERS: module_name - Caller's module name (for error output)
- * line_number - Caller's line number (for error output)
- * internal_name - Name or path of the namespace node
- * lookup_status - Exception code from NS lookup
- *
- * RETURN: None
- *
- * DESCRIPTION: Print warning message with full pathname
- *
- ******************************************************************************/
-
-void
-acpi_ns_report_error(const char *module_name,
- u32 line_number,
- const char *internal_name, acpi_status lookup_status)
-{
- acpi_status status;
- u32 bad_name;
- char *name = NULL;
-
- acpi_os_printf("ACPI Error (%s-%04d): ", module_name, line_number);
-
- if (lookup_status == AE_BAD_CHARACTER) {
-
- /* There is a non-ascii character in the name */
-
- ACPI_MOVE_32_TO_32(&bad_name,
- ACPI_CAST_PTR(u32, internal_name));
- acpi_os_printf("[0x%4.4X] (NON-ASCII)", bad_name);
- } else {
- /* Convert path to external format */
-
- status = acpi_ns_externalize_name(ACPI_UINT32_MAX,
- internal_name, NULL, &name);
-
- /* Print target name */
-
- if (ACPI_SUCCESS(status)) {
- acpi_os_printf("[%s]", name);
- } else {
- acpi_os_printf("[COULD NOT EXTERNALIZE NAME]");
- }
-
- if (name) {
- ACPI_FREE(name);
- }
- }
-
- acpi_os_printf(" Namespace lookup failure, %s\n",
- acpi_format_exception(lookup_status));
-}
-
-/*******************************************************************************
- *
- * FUNCTION: acpi_ns_report_method_error
- *
- * PARAMETERS: module_name - Caller's module name (for error output)
- * line_number - Caller's line number (for error output)
- * Message - Error message to use on failure
- * prefix_node - Prefix relative to the path
- * Path - Path to the node (optional)
- * method_status - Execution status
- *
- * RETURN: None
- *
- * DESCRIPTION: Print warning message with full pathname
- *
- ******************************************************************************/
-
-void
-acpi_ns_report_method_error(const char *module_name,
- u32 line_number,
- const char *message,
- struct acpi_namespace_node *prefix_node,
- const char *path, acpi_status method_status)
-{
- acpi_status status;
- struct acpi_namespace_node *node = prefix_node;
-
- acpi_os_printf("ACPI Error (%s-%04d): ", module_name, line_number);
-
- if (path) {
- status =
- acpi_ns_get_node(prefix_node, path, ACPI_NS_NO_UPSEARCH,
- &node);
- if (ACPI_FAILURE(status)) {
- acpi_os_printf("[Could not get node by pathname]");
- }
- }
-
- acpi_ns_print_node_pathname(node, message);
- acpi_os_printf(", %s\n", acpi_format_exception(method_status));
-}
-
/*******************************************************************************
*
* FUNCTION: acpi_ns_print_node_pathname
/*
* 16-, 32-, and 64-bit cases must use the move macros that perform
- * endian conversion and/or accomodate hardware that cannot perform
+ * endian conversion and/or accommodate hardware that cannot perform
* misaligned memory transfers
*/
case ACPI_RSC_MOVE16:
ACPI_MODULE_NAME("tbfadt")
/* Local prototypes */
-static inline void
+static ACPI_INLINE void
acpi_tb_init_generic_address(struct acpi_generic_address *generic_address,
u8 space_id, u8 byte_width, u64 address);
*
******************************************************************************/
-static inline void
+static ACPI_INLINE void
acpi_tb_init_generic_address(struct acpi_generic_address *generic_address,
u8 space_id, u8 byte_width, u64 address)
{
if (thread_id != acpi_gbl_prev_thread_id) {
if (ACPI_LV_THREADS & acpi_dbg_level) {
acpi_os_printf
- ("\n**** Context Switch from TID %p to TID %p ****\n\n",
- ACPI_CAST_PTR(void, acpi_gbl_prev_thread_id),
- ACPI_CAST_PTR(void, thread_id));
+ ("\n**** Context Switch from TID %u to TID %u ****\n\n",
+ (u32)acpi_gbl_prev_thread_id, (u32)thread_id);
}
acpi_gbl_prev_thread_id = thread_id;
acpi_os_printf("%8s-%04ld ", module_name, line_number);
if (ACPI_LV_THREADS & acpi_dbg_level) {
- acpi_os_printf("[%p] ", ACPI_CAST_PTR(void, thread_id));
+ acpi_os_printf("[%u] ", (u32)thread_id);
}
acpi_os_printf("[%02ld] %-22.22s: ",
#define _COMPONENT ACPI_UTILITIES
ACPI_MODULE_NAME("uteval")
-/*
- * Strings supported by the _OSI predefined (internal) method.
- *
- * March 2009: Removed "Linux" as this host no longer wants to respond true
- * for this string. Basically, the only safe OS strings are windows-related
- * and in many or most cases represent the only test path within the
- * BIOS-provided ASL code.
- *
- * The second element of each entry is used to track the newest version of
- * Windows that the BIOS has requested.
- */
-static struct acpi_interface_info acpi_interfaces_supported[] = {
- /* Operating System Vendor Strings */
-
- {"Windows 2000", ACPI_OSI_WIN_2000}, /* Windows 2000 */
- {"Windows 2001", ACPI_OSI_WIN_XP}, /* Windows XP */
- {"Windows 2001 SP1", ACPI_OSI_WIN_XP_SP1}, /* Windows XP SP1 */
- {"Windows 2001.1", ACPI_OSI_WINSRV_2003}, /* Windows Server 2003 */
- {"Windows 2001 SP2", ACPI_OSI_WIN_XP_SP2}, /* Windows XP SP2 */
- {"Windows 2001.1 SP1", ACPI_OSI_WINSRV_2003_SP1}, /* Windows Server 2003 SP1 - Added 03/2006 */
- {"Windows 2006", ACPI_OSI_WIN_VISTA}, /* Windows Vista - Added 03/2006 */
- {"Windows 2006.1", ACPI_OSI_WINSRV_2008}, /* Windows Server 2008 - Added 09/2009 */
- {"Windows 2006 SP1", ACPI_OSI_WIN_VISTA_SP1}, /* Windows Vista SP1 - Added 09/2009 */
- {"Windows 2009", ACPI_OSI_WIN_7}, /* Windows 7 and Server 2008 R2 - Added 09/2009 */
-
- /* Feature Group Strings */
-
- {"Extended Address Space Descriptor", 0}
-
- /*
- * All "optional" feature group strings (features that are implemented
- * by the host) should be implemented in the host version of
- * acpi_os_validate_interface and should not be added here.
- */
-};
-
-/*******************************************************************************
- *
- * FUNCTION: acpi_ut_osi_implementation
- *
- * PARAMETERS: walk_state - Current walk state
- *
- * RETURN: Status
- *
- * DESCRIPTION: Implementation of the _OSI predefined control method
- *
- ******************************************************************************/
-
-acpi_status acpi_ut_osi_implementation(struct acpi_walk_state *walk_state)
-{
- acpi_status status;
- union acpi_operand_object *string_desc;
- union acpi_operand_object *return_desc;
- u32 return_value;
- u32 i;
-
- ACPI_FUNCTION_TRACE(ut_osi_implementation);
-
- /* Validate the string input argument */
-
- string_desc = walk_state->arguments[0].object;
- if (!string_desc || (string_desc->common.type != ACPI_TYPE_STRING)) {
- return_ACPI_STATUS(AE_TYPE);
- }
-
- /* Create a return object */
-
- return_desc = acpi_ut_create_internal_object(ACPI_TYPE_INTEGER);
- if (!return_desc) {
- return_ACPI_STATUS(AE_NO_MEMORY);
- }
-
- /* Default return value is 0, NOT SUPPORTED */
-
- return_value = 0;
-
- /* Compare input string to static table of supported interfaces */
-
- for (i = 0; i < ACPI_ARRAY_LENGTH(acpi_interfaces_supported); i++) {
- if (!ACPI_STRCMP(string_desc->string.pointer,
- acpi_interfaces_supported[i].name)) {
- /*
- * The interface is supported.
- * Update the osi_data if necessary. We keep track of the latest
- * version of Windows that has been requested by the BIOS.
- */
- if (acpi_interfaces_supported[i].value >
- acpi_gbl_osi_data) {
- acpi_gbl_osi_data =
- acpi_interfaces_supported[i].value;
- }
-
- return_value = ACPI_UINT32_MAX;
- goto exit;
- }
- }
-
- /*
- * Did not match the string in the static table, call the host OSL to
- * check for a match with one of the optional strings (such as
- * "Module Device", "3.0 Thermal Model", etc.)
- */
- status = acpi_os_validate_interface(string_desc->string.pointer);
- if (ACPI_SUCCESS(status)) {
-
- /* The interface is supported */
-
- return_value = ACPI_UINT32_MAX;
- }
-
-exit:
- ACPI_DEBUG_PRINT_RAW ((ACPI_DB_INFO,
- "ACPI: BIOS _OSI(%s) is %ssupported\n",
- string_desc->string.pointer, return_value == 0 ? "not " : ""));
-
- /* Complete the return value */
-
- return_desc->integer.value = return_value;
- walk_state->return_desc = return_desc;
- return_ACPI_STATUS (AE_OK);
-}
-
-/*******************************************************************************
- *
- * FUNCTION: acpi_osi_invalidate
- *
- * PARAMETERS: interface_string
- *
- * RETURN: Status
- *
- * DESCRIPTION: invalidate string in pre-defiend _OSI string list
- *
- ******************************************************************************/
-
-acpi_status acpi_osi_invalidate(char *interface)
-{
- int i;
-
- for (i = 0; i < ACPI_ARRAY_LENGTH(acpi_interfaces_supported); i++) {
- if (!ACPI_STRCMP(interface, acpi_interfaces_supported[i].name)) {
- *acpi_interfaces_supported[i].name = '\0';
- return AE_OK;
- }
- }
- return AE_NOT_FOUND;
-}
-
/*******************************************************************************
*
* FUNCTION: acpi_ut_evaluate_object
* 1) _SB_ is defined to be a device to allow \_SB_._INI to be run
* during the initialization sequence.
* 2) _TZ_ is defined to be a thermal zone in order to allow ASL code to
- * perform a Notify() operation on it.
+ * perform a Notify() operation on it. 09/2010: Changed to type Device.
+ * This still allows notifies, but does not confuse host code that
+ * searches for valid thermal_zone objects.
*/
const struct acpi_predefined_names acpi_gbl_pre_defined_names[] = {
{"_GPE", ACPI_TYPE_LOCAL_SCOPE, NULL},
{"_PR_", ACPI_TYPE_LOCAL_SCOPE, NULL},
{"_SB_", ACPI_TYPE_DEVICE, NULL},
{"_SI_", ACPI_TYPE_LOCAL_SCOPE, NULL},
- {"_TZ_", ACPI_TYPE_THERMAL, NULL},
+ {"_TZ_", ACPI_TYPE_DEVICE, NULL},
{"_REV", ACPI_TYPE_INTEGER, (char *)ACPI_CA_SUPPORT_LEVEL},
{"_OS_", ACPI_TYPE_STRING, ACPI_OS_NAME},
{"_GL_", ACPI_TYPE_MUTEX, (char *)1},
acpi_gbl_exception_handler = NULL;
acpi_gbl_init_handler = NULL;
acpi_gbl_table_handler = NULL;
+ acpi_gbl_interface_handler = NULL;
/* Global Lock support */
acpi_gbl_debugger_configuration = DEBUGGER_THREADING;
acpi_gbl_db_output_flags = ACPI_DB_CONSOLE_OUTPUT;
acpi_gbl_osi_data = 0;
+ acpi_gbl_osi_mutex = NULL;
/* Hardware oriented */
#define _COMPONENT ACPI_UTILITIES
ACPI_MODULE_NAME("utids")
-/* Local prototypes */
-static void acpi_ut_copy_id_string(char *destination, char *source);
-
-/*******************************************************************************
- *
- * FUNCTION: acpi_ut_copy_id_string
- *
- * PARAMETERS: Destination - Where to copy the string
- * Source - Source string
- *
- * RETURN: None
- *
- * DESCRIPTION: Copies an ID string for the _HID, _CID, and _UID methods.
- * Performs removal of a leading asterisk if present -- workaround
- * for a known issue on a bunch of machines.
- *
- ******************************************************************************/
-
-static void acpi_ut_copy_id_string(char *destination, char *source)
-{
-
- /*
- * Workaround for ID strings that have a leading asterisk. This construct
- * is not allowed by the ACPI specification (ID strings must be
- * alphanumeric), but enough existing machines have this embedded in their
- * ID strings that the following code is useful.
- */
- if (*source == '*') {
- source++;
- }
-
- /* Do the actual copy */
-
- ACPI_STRCPY(destination, source);
-}
-
/*******************************************************************************
*
* FUNCTION: acpi_ut_execute_HID
* NOTE: Internal function, no parameter validation
*
******************************************************************************/
-
acpi_status
acpi_ut_execute_HID(struct acpi_namespace_node *device_node,
struct acpica_device_id **return_id)
if (obj_desc->common.type == ACPI_TYPE_INTEGER) {
acpi_ex_eisa_id_to_string(hid->string, obj_desc->integer.value);
} else {
- acpi_ut_copy_id_string(hid->string, obj_desc->string.pointer);
+ ACPI_STRCPY(hid->string, obj_desc->string.pointer);
}
hid->length = length;
if (obj_desc->common.type == ACPI_TYPE_INTEGER) {
acpi_ex_integer_to_string(uid->string, obj_desc->integer.value);
} else {
- acpi_ut_copy_id_string(uid->string, obj_desc->string.pointer);
+ ACPI_STRCPY(uid->string, obj_desc->string.pointer);
}
uid->length = length;
/* Copy the String CID from the returned object */
- acpi_ut_copy_id_string(next_id_string,
- cid_objects[i]->string.pointer);
+ ACPI_STRCPY(next_id_string,
+ cid_objects[i]->string.pointer);
length = cid_objects[i]->string.length + 1;
}
/* Close the acpi_event Handling */
acpi_ev_terminate();
+
+ /* Delete any dynamic _OSI interfaces */
+
+ acpi_ut_interface_terminate();
#endif
/* Close the Namespace */
ACPI_MODULE_NAME("utmath")
/*
- * Support for double-precision integer divide. This code is included here
- * in order to support kernel environments where the double-precision math
- * library is not available.
+ * Optional support for 64-bit double-precision integer divide. This code
+ * is configurable and is implemented in order to support 32-bit kernel
+ * environments where a 64-bit double-precision math library is not available.
+ *
+ * Support for a more normal 64-bit divide/modulo (with check for a divide-
+ * by-zero) appears after this optional section of code.
*/
#ifndef ACPI_USE_NATIVE_DIVIDE
+/* Structures used only for 64-bit divide */
+typedef struct uint64_struct {
+ u32 lo;
+ u32 hi;
+
+} uint64_struct;
+
+typedef union uint64_overlay {
+ u64 full;
+ struct uint64_struct part;
+
+} uint64_overlay;
+
/*******************************************************************************
*
* FUNCTION: acpi_ut_short_divide
* 32-bit remainder.
*
******************************************************************************/
+
acpi_status
acpi_ut_short_divide(u64 dividend,
u32 divisor, u64 *out_quotient, u32 *out_remainder)
#define _COMPONENT ACPI_UTILITIES
ACPI_MODULE_NAME("utmisc")
-/*
- * Common suffix for messages
- */
-#define ACPI_COMMON_MSG_SUFFIX \
- acpi_os_printf(" (%8.8X/%s-%u)\n", ACPI_CA_VERSION, module_name, line_number)
/*******************************************************************************
*
* FUNCTION: acpi_ut_validate_exception
return_ACPI_STATUS(AE_AML_INTERNAL);
}
-
-/*******************************************************************************
- *
- * FUNCTION: acpi_error, acpi_exception, acpi_warning, acpi_info
- *
- * PARAMETERS: module_name - Caller's module name (for error output)
- * line_number - Caller's line number (for error output)
- * Format - Printf format string + additional args
- *
- * RETURN: None
- *
- * DESCRIPTION: Print message with module/line/version info
- *
- ******************************************************************************/
-
-void ACPI_INTERNAL_VAR_XFACE
-acpi_error(const char *module_name, u32 line_number, const char *format, ...)
-{
- va_list args;
-
- acpi_os_printf("ACPI Error: ");
-
- va_start(args, format);
- acpi_os_vprintf(format, args);
- ACPI_COMMON_MSG_SUFFIX;
- va_end(args);
-}
-
-void ACPI_INTERNAL_VAR_XFACE
-acpi_exception(const char *module_name,
- u32 line_number, acpi_status status, const char *format, ...)
-{
- va_list args;
-
- acpi_os_printf("ACPI Exception: %s, ", acpi_format_exception(status));
-
- va_start(args, format);
- acpi_os_vprintf(format, args);
- ACPI_COMMON_MSG_SUFFIX;
- va_end(args);
-}
-
-void ACPI_INTERNAL_VAR_XFACE
-acpi_warning(const char *module_name, u32 line_number, const char *format, ...)
-{
- va_list args;
-
- acpi_os_printf("ACPI Warning: ");
-
- va_start(args, format);
- acpi_os_vprintf(format, args);
- ACPI_COMMON_MSG_SUFFIX;
- va_end(args);
-}
-
-void ACPI_INTERNAL_VAR_XFACE
-acpi_info(const char *module_name, u32 line_number, const char *format, ...)
-{
- va_list args;
-
- acpi_os_printf("ACPI: ");
-
- va_start(args, format);
- acpi_os_vprintf(format, args);
- acpi_os_printf("\n");
- va_end(args);
-}
-
-ACPI_EXPORT_SYMBOL(acpi_error)
-ACPI_EXPORT_SYMBOL(acpi_exception)
-ACPI_EXPORT_SYMBOL(acpi_warning)
-ACPI_EXPORT_SYMBOL(acpi_info)
-
-/*******************************************************************************
- *
- * FUNCTION: acpi_ut_predefined_warning
- *
- * PARAMETERS: module_name - Caller's module name (for error output)
- * line_number - Caller's line number (for error output)
- * Pathname - Full pathname to the node
- * node_flags - From Namespace node for the method/object
- * Format - Printf format string + additional args
- *
- * RETURN: None
- *
- * DESCRIPTION: Warnings for the predefined validation module. Messages are
- * only emitted the first time a problem with a particular
- * method/object is detected. This prevents a flood of error
- * messages for methods that are repeatedly evaluated.
- *
-******************************************************************************/
-
-void ACPI_INTERNAL_VAR_XFACE
-acpi_ut_predefined_warning(const char *module_name,
- u32 line_number,
- char *pathname,
- u8 node_flags, const char *format, ...)
-{
- va_list args;
-
- /*
- * Warning messages for this method/object will be disabled after the
- * first time a validation fails or an object is successfully repaired.
- */
- if (node_flags & ANOBJ_EVALUATED) {
- return;
- }
-
- acpi_os_printf("ACPI Warning for %s: ", pathname);
-
- va_start(args, format);
- acpi_os_vprintf(format, args);
- ACPI_COMMON_MSG_SUFFIX;
- va_end(args);
-}
-
-/*******************************************************************************
- *
- * FUNCTION: acpi_ut_predefined_info
- *
- * PARAMETERS: module_name - Caller's module name (for error output)
- * line_number - Caller's line number (for error output)
- * Pathname - Full pathname to the node
- * node_flags - From Namespace node for the method/object
- * Format - Printf format string + additional args
- *
- * RETURN: None
- *
- * DESCRIPTION: Info messages for the predefined validation module. Messages
- * are only emitted the first time a problem with a particular
- * method/object is detected. This prevents a flood of
- * messages for methods that are repeatedly evaluated.
- *
- ******************************************************************************/
-
-void ACPI_INTERNAL_VAR_XFACE
-acpi_ut_predefined_info(const char *module_name,
- u32 line_number,
- char *pathname, u8 node_flags, const char *format, ...)
-{
- va_list args;
-
- /*
- * Warning messages for this method/object will be disabled after the
- * first time a validation fails or an object is successfully repaired.
- */
- if (node_flags & ANOBJ_EVALUATED) {
- return;
- }
-
- acpi_os_printf("ACPI Info for %s: ", pathname);
-
- va_start(args, format);
- acpi_os_vprintf(format, args);
- ACPI_COMMON_MSG_SUFFIX;
- va_end(args);
-}
spin_lock_init(acpi_gbl_gpe_lock);
spin_lock_init(acpi_gbl_hardware_lock);
+ /* Mutex for _OSI support */
+ status = acpi_os_create_mutex(&acpi_gbl_osi_mutex);
+ if (ACPI_FAILURE(status)) {
+ return_ACPI_STATUS(status);
+ }
+
/* Create the reader/writer lock for namespace access */
status = acpi_ut_create_rw_lock(&acpi_gbl_namespace_rw_lock);
acpi_ut_delete_mutex(i);
}
+ acpi_os_delete_mutex(acpi_gbl_osi_mutex);
+
/* Delete the spinlocks */
acpi_os_delete_lock(acpi_gbl_gpe_lock);
if (acpi_gbl_mutex_info[i].thread_id == this_thread_id) {
if (i == mutex_id) {
ACPI_ERROR((AE_INFO,
- "Mutex [%s] already acquired by this thread [%p]",
+ "Mutex [%s] already acquired by this thread [%u]",
acpi_ut_get_mutex_name
(mutex_id),
- ACPI_CAST_PTR(void,
- this_thread_id)));
+ (u32)this_thread_id));
return (AE_ALREADY_ACQUIRED);
}
ACPI_ERROR((AE_INFO,
- "Invalid acquire order: Thread %p owns [%s], wants [%s]",
- ACPI_CAST_PTR(void, this_thread_id),
+ "Invalid acquire order: Thread %u owns [%s], wants [%s]",
+ (u32)this_thread_id,
acpi_ut_get_mutex_name(i),
acpi_ut_get_mutex_name(mutex_id)));
#endif
ACPI_DEBUG_PRINT((ACPI_DB_MUTEX,
- "Thread %p attempting to acquire Mutex [%s]\n",
- ACPI_CAST_PTR(void, this_thread_id),
+ "Thread %u attempting to acquire Mutex [%s]\n",
+ (u32)this_thread_id,
acpi_ut_get_mutex_name(mutex_id)));
status = acpi_os_acquire_mutex(acpi_gbl_mutex_info[mutex_id].mutex,
ACPI_WAIT_FOREVER);
if (ACPI_SUCCESS(status)) {
ACPI_DEBUG_PRINT((ACPI_DB_MUTEX,
- "Thread %p acquired Mutex [%s]\n",
- ACPI_CAST_PTR(void, this_thread_id),
+ "Thread %u acquired Mutex [%s]\n",
+ (u32)this_thread_id,
acpi_ut_get_mutex_name(mutex_id)));
acpi_gbl_mutex_info[mutex_id].use_count++;
acpi_gbl_mutex_info[mutex_id].thread_id = this_thread_id;
} else {
ACPI_EXCEPTION((AE_INFO, status,
- "Thread %p could not acquire Mutex [0x%X]",
- ACPI_CAST_PTR(void, this_thread_id), mutex_id));
+ "Thread %u could not acquire Mutex [0x%X]",
+ (u32)this_thread_id, mutex_id));
}
return (status);
acpi_status acpi_ut_release_mutex(acpi_mutex_handle mutex_id)
{
+ acpi_thread_id this_thread_id;
+
ACPI_FUNCTION_NAME(ut_release_mutex);
- ACPI_DEBUG_PRINT((ACPI_DB_MUTEX, "Thread %p releasing Mutex [%s]\n",
- ACPI_CAST_PTR(void, acpi_os_get_thread_id()),
+ this_thread_id = acpi_os_get_thread_id();
+
+ ACPI_DEBUG_PRINT((ACPI_DB_MUTEX, "Thread %u releasing Mutex [%s]\n",
+ (u32)this_thread_id,
acpi_ut_get_mutex_name(mutex_id)));
if (mutex_id > ACPI_MAX_MUTEX) {
--- /dev/null
+/******************************************************************************
+ *
+ * Module Name: utosi - Support for the _OSI predefined control method
+ *
+ *****************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2010, Intel Corp.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions, and the following disclaimer,
+ * without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ * substantially similar to the "NO WARRANTY" disclaimer below
+ * ("Disclaimer") and any redistribution must be conditioned upon
+ * including a substantially similar Disclaimer requirement for further
+ * binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ * of any contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+#include <acpi/acpi.h>
+#include "accommon.h"
+
+#define _COMPONENT ACPI_UTILITIES
+ACPI_MODULE_NAME("utosi")
+
+/*
+ * Strings supported by the _OSI predefined control method (which is
+ * implemented internally within this module.)
+ *
+ * March 2009: Removed "Linux" as this host no longer wants to respond true
+ * for this string. Basically, the only safe OS strings are windows-related
+ * and in many or most cases represent the only test path within the
+ * BIOS-provided ASL code.
+ *
+ * The last element of each entry is used to track the newest version of
+ * Windows that the BIOS has requested.
+ */
+static struct acpi_interface_info acpi_default_supported_interfaces[] = {
+ /* Operating System Vendor Strings */
+
+ {"Windows 2000", NULL, 0, ACPI_OSI_WIN_2000}, /* Windows 2000 */
+ {"Windows 2001", NULL, 0, ACPI_OSI_WIN_XP}, /* Windows XP */
+ {"Windows 2001 SP1", NULL, 0, ACPI_OSI_WIN_XP_SP1}, /* Windows XP SP1 */
+ {"Windows 2001.1", NULL, 0, ACPI_OSI_WINSRV_2003}, /* Windows Server 2003 */
+ {"Windows 2001 SP2", NULL, 0, ACPI_OSI_WIN_XP_SP2}, /* Windows XP SP2 */
+ {"Windows 2001.1 SP1", NULL, 0, ACPI_OSI_WINSRV_2003_SP1}, /* Windows Server 2003 SP1 - Added 03/2006 */
+ {"Windows 2006", NULL, 0, ACPI_OSI_WIN_VISTA}, /* Windows Vista - Added 03/2006 */
+ {"Windows 2006.1", NULL, 0, ACPI_OSI_WINSRV_2008}, /* Windows Server 2008 - Added 09/2009 */
+ {"Windows 2006 SP1", NULL, 0, ACPI_OSI_WIN_VISTA_SP1}, /* Windows Vista SP1 - Added 09/2009 */
+ {"Windows 2006 SP2", NULL, 0, ACPI_OSI_WIN_VISTA_SP2}, /* Windows Vista SP2 - Added 09/2010 */
+ {"Windows 2009", NULL, 0, ACPI_OSI_WIN_7}, /* Windows 7 and Server 2008 R2 - Added 09/2009 */
+
+ /* Feature Group Strings */
+
+ {"Extended Address Space Descriptor", NULL, 0, 0}
+
+ /*
+ * All "optional" feature group strings (features that are implemented
+ * by the host) should be dynamically added by the host via
+ * acpi_install_interface and should not be manually added here.
+ *
+ * Examples of optional feature group strings:
+ *
+ * "Module Device"
+ * "Processor Device"
+ * "3.0 Thermal Model"
+ * "3.0 _SCP Extensions"
+ * "Processor Aggregator Device"
+ */
+};
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ut_initialize_interfaces
+ *
+ * PARAMETERS: None
+ *
+ * RETURN: Status
+ *
+ * DESCRIPTION: Initialize the global _OSI supported interfaces list
+ *
+ ******************************************************************************/
+
+acpi_status acpi_ut_initialize_interfaces(void)
+{
+ u32 i;
+
+ (void)acpi_os_acquire_mutex(acpi_gbl_osi_mutex, ACPI_WAIT_FOREVER);
+ acpi_gbl_supported_interfaces = acpi_default_supported_interfaces;
+
+ /* Link the static list of supported interfaces */
+
+ for (i = 0;
+ i < (ACPI_ARRAY_LENGTH(acpi_default_supported_interfaces) - 1);
+ i++) {
+ acpi_default_supported_interfaces[i].next =
+ &acpi_default_supported_interfaces[(acpi_size) i + 1];
+ }
+
+ acpi_os_release_mutex(acpi_gbl_osi_mutex);
+ return (AE_OK);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ut_interface_terminate
+ *
+ * PARAMETERS: None
+ *
+ * RETURN: None
+ *
+ * DESCRIPTION: Delete all interfaces in the global list. Sets
+ * acpi_gbl_supported_interfaces to NULL.
+ *
+ ******************************************************************************/
+
+void acpi_ut_interface_terminate(void)
+{
+ struct acpi_interface_info *next_interface;
+
+ (void)acpi_os_acquire_mutex(acpi_gbl_osi_mutex, ACPI_WAIT_FOREVER);
+ next_interface = acpi_gbl_supported_interfaces;
+
+ while (next_interface) {
+ acpi_gbl_supported_interfaces = next_interface->next;
+
+ /* Only interfaces added at runtime can be freed */
+
+ if (next_interface->flags & ACPI_OSI_DYNAMIC) {
+ ACPI_FREE(next_interface->name);
+ ACPI_FREE(next_interface);
+ }
+
+ next_interface = acpi_gbl_supported_interfaces;
+ }
+
+ acpi_os_release_mutex(acpi_gbl_osi_mutex);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ut_install_interface
+ *
+ * PARAMETERS: interface_name - The interface to install
+ *
+ * RETURN: Status
+ *
+ * DESCRIPTION: Install the interface into the global interface list.
+ * Caller MUST hold acpi_gbl_osi_mutex
+ *
+ ******************************************************************************/
+
+acpi_status acpi_ut_install_interface(acpi_string interface_name)
+{
+ struct acpi_interface_info *interface_info;
+
+ /* Allocate info block and space for the name string */
+
+ interface_info =
+ ACPI_ALLOCATE_ZEROED(sizeof(struct acpi_interface_info));
+ if (!interface_info) {
+ return (AE_NO_MEMORY);
+ }
+
+ interface_info->name =
+ ACPI_ALLOCATE_ZEROED(ACPI_STRLEN(interface_name) + 1);
+ if (!interface_info->name) {
+ ACPI_FREE(interface_info);
+ return (AE_NO_MEMORY);
+ }
+
+ /* Initialize new info and insert at the head of the global list */
+
+ ACPI_STRCPY(interface_info->name, interface_name);
+ interface_info->flags = ACPI_OSI_DYNAMIC;
+ interface_info->next = acpi_gbl_supported_interfaces;
+
+ acpi_gbl_supported_interfaces = interface_info;
+ return (AE_OK);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ut_remove_interface
+ *
+ * PARAMETERS: interface_name - The interface to remove
+ *
+ * RETURN: Status
+ *
+ * DESCRIPTION: Remove the interface from the global interface list.
+ * Caller MUST hold acpi_gbl_osi_mutex
+ *
+ ******************************************************************************/
+
+acpi_status acpi_ut_remove_interface(acpi_string interface_name)
+{
+ struct acpi_interface_info *previous_interface;
+ struct acpi_interface_info *next_interface;
+
+ previous_interface = next_interface = acpi_gbl_supported_interfaces;
+ while (next_interface) {
+ if (!ACPI_STRCMP(interface_name, next_interface->name)) {
+
+ /* Found: name is in either the static list or was added at runtime */
+
+ if (next_interface->flags & ACPI_OSI_DYNAMIC) {
+
+ /* Interface was added dynamically, remove and free it */
+
+ if (previous_interface == next_interface) {
+ acpi_gbl_supported_interfaces =
+ next_interface->next;
+ } else {
+ previous_interface->next =
+ next_interface->next;
+ }
+
+ ACPI_FREE(next_interface->name);
+ ACPI_FREE(next_interface);
+ } else {
+ /*
+ * Interface is in static list. If marked invalid, then it
+ * does not actually exist. Else, mark it invalid.
+ */
+ if (next_interface->flags & ACPI_OSI_INVALID) {
+ return (AE_NOT_EXIST);
+ }
+
+ next_interface->flags |= ACPI_OSI_INVALID;
+ }
+
+ return (AE_OK);
+ }
+
+ previous_interface = next_interface;
+ next_interface = next_interface->next;
+ }
+
+ /* Interface was not found */
+
+ return (AE_NOT_EXIST);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ut_get_interface
+ *
+ * PARAMETERS: interface_name - The interface to find
+ *
+ * RETURN: struct acpi_interface_info if found. NULL if not found.
+ *
+ * DESCRIPTION: Search for the specified interface name in the global list.
+ * Caller MUST hold acpi_gbl_osi_mutex
+ *
+ ******************************************************************************/
+
+struct acpi_interface_info *acpi_ut_get_interface(acpi_string interface_name)
+{
+ struct acpi_interface_info *next_interface;
+
+ next_interface = acpi_gbl_supported_interfaces;
+ while (next_interface) {
+ if (!ACPI_STRCMP(interface_name, next_interface->name)) {
+ return (next_interface);
+ }
+
+ next_interface = next_interface->next;
+ }
+
+ return (NULL);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ut_osi_implementation
+ *
+ * PARAMETERS: walk_state - Current walk state
+ *
+ * RETURN: Status
+ *
+ * DESCRIPTION: Implementation of the _OSI predefined control method. When
+ * an invocation of _OSI is encountered in the system AML,
+ * control is transferred to this function.
+ *
+ ******************************************************************************/
+
+acpi_status acpi_ut_osi_implementation(struct acpi_walk_state * walk_state)
+{
+ union acpi_operand_object *string_desc;
+ union acpi_operand_object *return_desc;
+ struct acpi_interface_info *interface_info;
+ acpi_interface_handler interface_handler;
+ u32 return_value;
+
+ ACPI_FUNCTION_TRACE(ut_osi_implementation);
+
+ /* Validate the string input argument (from the AML caller) */
+
+ string_desc = walk_state->arguments[0].object;
+ if (!string_desc || (string_desc->common.type != ACPI_TYPE_STRING)) {
+ return_ACPI_STATUS(AE_TYPE);
+ }
+
+ /* Create a return object */
+
+ return_desc = acpi_ut_create_internal_object(ACPI_TYPE_INTEGER);
+ if (!return_desc) {
+ return_ACPI_STATUS(AE_NO_MEMORY);
+ }
+
+ /* Default return value is 0, NOT SUPPORTED */
+
+ return_value = 0;
+ (void)acpi_os_acquire_mutex(acpi_gbl_osi_mutex, ACPI_WAIT_FOREVER);
+
+ /* Lookup the interface in the global _OSI list */
+
+ interface_info = acpi_ut_get_interface(string_desc->string.pointer);
+ if (interface_info && !(interface_info->flags & ACPI_OSI_INVALID)) {
+ /*
+ * The interface is supported.
+ * Update the osi_data if necessary. We keep track of the latest
+ * version of Windows that has been requested by the BIOS.
+ */
+ if (interface_info->value > acpi_gbl_osi_data) {
+ acpi_gbl_osi_data = interface_info->value;
+ }
+
+ return_value = ACPI_UINT32_MAX;
+ }
+
+ acpi_os_release_mutex(acpi_gbl_osi_mutex);
+
+ /*
+ * Invoke an optional _OSI interface handler. The host OS may wish
+ * to do some interface-specific handling. For example, warn about
+ * certain interfaces or override the true/false support value.
+ */
+ interface_handler = acpi_gbl_interface_handler;
+ if (interface_handler) {
+ return_value =
+ interface_handler(string_desc->string.pointer,
+ return_value);
+ }
+
+ ACPI_DEBUG_PRINT_RAW((ACPI_DB_INFO,
+ "ACPI: BIOS _OSI(\"%s\") is %ssupported\n",
+ string_desc->string.pointer,
+ return_value == 0 ? "not " : ""));
+
+ /* Complete the return object */
+
+ return_desc->integer.value = return_value;
+ walk_state->return_desc = return_desc;
+ return_ACPI_STATUS(AE_OK);
+}
return_ACPI_STATUS(status);
}
+ /* Initialize the global OSI interfaces list with the static names */
+
+ status = acpi_ut_initialize_interfaces();
+ if (ACPI_FAILURE(status)) {
+ ACPI_EXCEPTION((AE_INFO, status,
+ "During OSI interfaces initialization"));
+ return_ACPI_STATUS(status);
+ }
+
/* If configured, initialize the AML debugger */
ACPI_DEBUGGER_EXEC(status = acpi_db_initialize());
ACPI_EXPORT_SYMBOL(acpi_install_initialization_handler)
#endif /* ACPI_FUTURE_USAGE */
+
/*****************************************************************************
*
* FUNCTION: acpi_purge_cached_objects
}
ACPI_EXPORT_SYMBOL(acpi_purge_cached_objects)
-#endif
+
+/*****************************************************************************
+ *
+ * FUNCTION: acpi_install_interface
+ *
+ * PARAMETERS: interface_name - The interface to install
+ *
+ * RETURN: Status
+ *
+ * DESCRIPTION: Install an _OSI interface to the global list
+ *
+ ****************************************************************************/
+acpi_status acpi_install_interface(acpi_string interface_name)
+{
+ acpi_status status;
+ struct acpi_interface_info *interface_info;
+
+ /* Parameter validation */
+
+ if (!interface_name || (ACPI_STRLEN(interface_name) == 0)) {
+ return (AE_BAD_PARAMETER);
+ }
+
+ (void)acpi_os_acquire_mutex(acpi_gbl_osi_mutex, ACPI_WAIT_FOREVER);
+
+ /* Check if the interface name is already in the global list */
+
+ interface_info = acpi_ut_get_interface(interface_name);
+ if (interface_info) {
+ /*
+ * The interface already exists in the list. This is OK if the
+ * interface has been marked invalid -- just clear the bit.
+ */
+ if (interface_info->flags & ACPI_OSI_INVALID) {
+ interface_info->flags &= ~ACPI_OSI_INVALID;
+ status = AE_OK;
+ } else {
+ status = AE_ALREADY_EXISTS;
+ }
+ } else {
+ /* New interface name, install into the global list */
+
+ status = acpi_ut_install_interface(interface_name);
+ }
+
+ acpi_os_release_mutex(acpi_gbl_osi_mutex);
+ return (status);
+}
+
+ACPI_EXPORT_SYMBOL(acpi_install_interface)
+
+/*****************************************************************************
+ *
+ * FUNCTION: acpi_remove_interface
+ *
+ * PARAMETERS: interface_name - The interface to remove
+ *
+ * RETURN: Status
+ *
+ * DESCRIPTION: Remove an _OSI interface from the global list
+ *
+ ****************************************************************************/
+acpi_status acpi_remove_interface(acpi_string interface_name)
+{
+ acpi_status status;
+
+ /* Parameter validation */
+
+ if (!interface_name || (ACPI_STRLEN(interface_name) == 0)) {
+ return (AE_BAD_PARAMETER);
+ }
+
+ (void)acpi_os_acquire_mutex(acpi_gbl_osi_mutex, ACPI_WAIT_FOREVER);
+
+ status = acpi_ut_remove_interface(interface_name);
+
+ acpi_os_release_mutex(acpi_gbl_osi_mutex);
+ return (status);
+}
+
+ACPI_EXPORT_SYMBOL(acpi_remove_interface)
+
+/*****************************************************************************
+ *
+ * FUNCTION: acpi_install_interface_handler
+ *
+ * PARAMETERS: Handler - The _OSI interface handler to install
+ * NULL means "remove existing handler"
+ *
+ * RETURN: Status
+ *
+ * DESCRIPTION: Install a handler for the predefined _OSI ACPI method.
+ * invoked during execution of the internal implementation of
+ * _OSI. A NULL handler simply removes any existing handler.
+ *
+ ****************************************************************************/
+acpi_status acpi_install_interface_handler(acpi_interface_handler handler)
+{
+ acpi_status status = AE_OK;
+
+ (void)acpi_os_acquire_mutex(acpi_gbl_osi_mutex, ACPI_WAIT_FOREVER);
+
+ if (handler && acpi_gbl_interface_handler) {
+ status = AE_ALREADY_EXISTS;
+ } else {
+ acpi_gbl_interface_handler = handler;
+ }
+
+ acpi_os_release_mutex(acpi_gbl_osi_mutex);
+ return (status);
+}
+
+ACPI_EXPORT_SYMBOL(acpi_install_interface_handler)
+#endif /* !ACPI_ASL_COMPILER */
--- /dev/null
+/*******************************************************************************
+ *
+ * Module Name: utxferror - Various error/warning output functions
+ *
+ ******************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2010, Intel Corp.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions, and the following disclaimer,
+ * without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ * substantially similar to the "NO WARRANTY" disclaimer below
+ * ("Disclaimer") and any redistribution must be conditioned upon
+ * including a substantially similar Disclaimer requirement for further
+ * binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ * of any contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+#include <acpi/acpi.h>
+#include "accommon.h"
+#include "acnamesp.h"
+
+#define _COMPONENT ACPI_UTILITIES
+ACPI_MODULE_NAME("utxferror")
+
+/*
+ * This module is used for the in-kernel ACPICA as well as the ACPICA
+ * tools/applications.
+ *
+ * For the i_aSL compiler case, the output is redirected to stderr so that
+ * any of the various ACPI errors and warnings do not appear in the output
+ * files, for either the compiler or disassembler portions of the tool.
+ */
+#ifdef ACPI_ASL_COMPILER
+#include <stdio.h>
+extern FILE *acpi_gbl_output_file;
+
+#define ACPI_MSG_REDIRECT_BEGIN \
+ FILE *output_file = acpi_gbl_output_file; \
+ acpi_os_redirect_output (stderr);
+
+#define ACPI_MSG_REDIRECT_END \
+ acpi_os_redirect_output (output_file);
+
+#else
+/*
+ * non-i_aSL case - no redirection, nothing to do
+ */
+#define ACPI_MSG_REDIRECT_BEGIN
+#define ACPI_MSG_REDIRECT_END
+#endif
+/*
+ * Common message prefixes
+ */
+#define ACPI_MSG_ERROR "ACPI Error: "
+#define ACPI_MSG_EXCEPTION "ACPI Exception: "
+#define ACPI_MSG_WARNING "ACPI Warning: "
+#define ACPI_MSG_INFO "ACPI: "
+/*
+ * Common message suffix
+ */
+#define ACPI_MSG_SUFFIX \
+ acpi_os_printf (" (%8.8X/%s-%u)\n", ACPI_CA_VERSION, module_name, line_number)
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_error
+ *
+ * PARAMETERS: module_name - Caller's module name (for error output)
+ * line_number - Caller's line number (for error output)
+ * Format - Printf format string + additional args
+ *
+ * RETURN: None
+ *
+ * DESCRIPTION: Print "ACPI Error" message with module/line/version info
+ *
+ ******************************************************************************/
+void ACPI_INTERNAL_VAR_XFACE
+acpi_error(const char *module_name, u32 line_number, const char *format, ...)
+{
+ va_list arg_list;
+
+ ACPI_MSG_REDIRECT_BEGIN;
+ acpi_os_printf(ACPI_MSG_ERROR);
+
+ va_start(arg_list, format);
+ acpi_os_vprintf(format, arg_list);
+ ACPI_MSG_SUFFIX;
+ va_end(arg_list);
+
+ ACPI_MSG_REDIRECT_END;
+}
+
+ACPI_EXPORT_SYMBOL(acpi_error)
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_exception
+ *
+ * PARAMETERS: module_name - Caller's module name (for error output)
+ * line_number - Caller's line number (for error output)
+ * Status - Status to be formatted
+ * Format - Printf format string + additional args
+ *
+ * RETURN: None
+ *
+ * DESCRIPTION: Print "ACPI Exception" message with module/line/version info
+ * and decoded acpi_status.
+ *
+ ******************************************************************************/
+void ACPI_INTERNAL_VAR_XFACE
+acpi_exception(const char *module_name,
+ u32 line_number, acpi_status status, const char *format, ...)
+{
+ va_list arg_list;
+
+ ACPI_MSG_REDIRECT_BEGIN;
+ acpi_os_printf(ACPI_MSG_EXCEPTION "%s, ",
+ acpi_format_exception(status));
+
+ va_start(arg_list, format);
+ acpi_os_vprintf(format, arg_list);
+ ACPI_MSG_SUFFIX;
+ va_end(arg_list);
+
+ ACPI_MSG_REDIRECT_END;
+}
+
+ACPI_EXPORT_SYMBOL(acpi_exception)
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_warning
+ *
+ * PARAMETERS: module_name - Caller's module name (for error output)
+ * line_number - Caller's line number (for error output)
+ * Format - Printf format string + additional args
+ *
+ * RETURN: None
+ *
+ * DESCRIPTION: Print "ACPI Warning" message with module/line/version info
+ *
+ ******************************************************************************/
+void ACPI_INTERNAL_VAR_XFACE
+acpi_warning(const char *module_name, u32 line_number, const char *format, ...)
+{
+ va_list arg_list;
+
+ ACPI_MSG_REDIRECT_BEGIN;
+ acpi_os_printf(ACPI_MSG_WARNING);
+
+ va_start(arg_list, format);
+ acpi_os_vprintf(format, arg_list);
+ ACPI_MSG_SUFFIX;
+ va_end(arg_list);
+
+ ACPI_MSG_REDIRECT_END;
+}
+
+ACPI_EXPORT_SYMBOL(acpi_warning)
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_info
+ *
+ * PARAMETERS: module_name - Caller's module name (for error output)
+ * line_number - Caller's line number (for error output)
+ * Format - Printf format string + additional args
+ *
+ * RETURN: None
+ *
+ * DESCRIPTION: Print generic "ACPI:" information message. There is no
+ * module/line/version info in order to keep the message simple.
+ *
+ * TBD: module_name and line_number args are not needed, should be removed.
+ *
+ ******************************************************************************/
+void ACPI_INTERNAL_VAR_XFACE
+acpi_info(const char *module_name, u32 line_number, const char *format, ...)
+{
+ va_list arg_list;
+
+ ACPI_MSG_REDIRECT_BEGIN;
+ acpi_os_printf(ACPI_MSG_INFO);
+
+ va_start(arg_list, format);
+ acpi_os_vprintf(format, arg_list);
+ acpi_os_printf("\n");
+ va_end(arg_list);
+
+ ACPI_MSG_REDIRECT_END;
+}
+
+ACPI_EXPORT_SYMBOL(acpi_info)
+
+/*
+ * The remainder of this module contains internal error functions that may
+ * be configured out.
+ */
+#if !defined (ACPI_NO_ERROR_MESSAGES) && !defined (ACPI_BIN_APP)
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ut_predefined_warning
+ *
+ * PARAMETERS: module_name - Caller's module name (for error output)
+ * line_number - Caller's line number (for error output)
+ * Pathname - Full pathname to the node
+ * node_flags - From Namespace node for the method/object
+ * Format - Printf format string + additional args
+ *
+ * RETURN: None
+ *
+ * DESCRIPTION: Warnings for the predefined validation module. Messages are
+ * only emitted the first time a problem with a particular
+ * method/object is detected. This prevents a flood of error
+ * messages for methods that are repeatedly evaluated.
+ *
+ ******************************************************************************/
+void ACPI_INTERNAL_VAR_XFACE
+acpi_ut_predefined_warning(const char *module_name,
+ u32 line_number,
+ char *pathname,
+ u8 node_flags, const char *format, ...)
+{
+ va_list arg_list;
+
+ /*
+ * Warning messages for this method/object will be disabled after the
+ * first time a validation fails or an object is successfully repaired.
+ */
+ if (node_flags & ANOBJ_EVALUATED) {
+ return;
+ }
+
+ acpi_os_printf(ACPI_MSG_WARNING "For %s: ", pathname);
+
+ va_start(arg_list, format);
+ acpi_os_vprintf(format, arg_list);
+ ACPI_MSG_SUFFIX;
+ va_end(arg_list);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ut_predefined_info
+ *
+ * PARAMETERS: module_name - Caller's module name (for error output)
+ * line_number - Caller's line number (for error output)
+ * Pathname - Full pathname to the node
+ * node_flags - From Namespace node for the method/object
+ * Format - Printf format string + additional args
+ *
+ * RETURN: None
+ *
+ * DESCRIPTION: Info messages for the predefined validation module. Messages
+ * are only emitted the first time a problem with a particular
+ * method/object is detected. This prevents a flood of
+ * messages for methods that are repeatedly evaluated.
+ *
+ ******************************************************************************/
+
+void ACPI_INTERNAL_VAR_XFACE
+acpi_ut_predefined_info(const char *module_name,
+ u32 line_number,
+ char *pathname, u8 node_flags, const char *format, ...)
+{
+ va_list arg_list;
+
+ /*
+ * Warning messages for this method/object will be disabled after the
+ * first time a validation fails or an object is successfully repaired.
+ */
+ if (node_flags & ANOBJ_EVALUATED) {
+ return;
+ }
+
+ acpi_os_printf(ACPI_MSG_INFO "For %s: ", pathname);
+
+ va_start(arg_list, format);
+ acpi_os_vprintf(format, arg_list);
+ ACPI_MSG_SUFFIX;
+ va_end(arg_list);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ut_namespace_error
+ *
+ * PARAMETERS: module_name - Caller's module name (for error output)
+ * line_number - Caller's line number (for error output)
+ * internal_name - Name or path of the namespace node
+ * lookup_status - Exception code from NS lookup
+ *
+ * RETURN: None
+ *
+ * DESCRIPTION: Print error message with the full pathname for the NS node.
+ *
+ ******************************************************************************/
+
+void
+acpi_ut_namespace_error(const char *module_name,
+ u32 line_number,
+ const char *internal_name, acpi_status lookup_status)
+{
+ acpi_status status;
+ u32 bad_name;
+ char *name = NULL;
+
+ ACPI_MSG_REDIRECT_BEGIN;
+ acpi_os_printf(ACPI_MSG_ERROR);
+
+ if (lookup_status == AE_BAD_CHARACTER) {
+
+ /* There is a non-ascii character in the name */
+
+ ACPI_MOVE_32_TO_32(&bad_name,
+ ACPI_CAST_PTR(u32, internal_name));
+ acpi_os_printf("[0x%4.4X] (NON-ASCII)", bad_name);
+ } else {
+ /* Convert path to external format */
+
+ status = acpi_ns_externalize_name(ACPI_UINT32_MAX,
+ internal_name, NULL, &name);
+
+ /* Print target name */
+
+ if (ACPI_SUCCESS(status)) {
+ acpi_os_printf("[%s]", name);
+ } else {
+ acpi_os_printf("[COULD NOT EXTERNALIZE NAME]");
+ }
+
+ if (name) {
+ ACPI_FREE(name);
+ }
+ }
+
+ acpi_os_printf(" Namespace lookup failure, %s",
+ acpi_format_exception(lookup_status));
+
+ ACPI_MSG_SUFFIX;
+ ACPI_MSG_REDIRECT_END;
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ut_method_error
+ *
+ * PARAMETERS: module_name - Caller's module name (for error output)
+ * line_number - Caller's line number (for error output)
+ * Message - Error message to use on failure
+ * prefix_node - Prefix relative to the path
+ * Path - Path to the node (optional)
+ * method_status - Execution status
+ *
+ * RETURN: None
+ *
+ * DESCRIPTION: Print error message with the full pathname for the method.
+ *
+ ******************************************************************************/
+
+void
+acpi_ut_method_error(const char *module_name,
+ u32 line_number,
+ const char *message,
+ struct acpi_namespace_node *prefix_node,
+ const char *path, acpi_status method_status)
+{
+ acpi_status status;
+ struct acpi_namespace_node *node = prefix_node;
+
+ ACPI_MSG_REDIRECT_BEGIN;
+ acpi_os_printf(ACPI_MSG_ERROR);
+
+ if (path) {
+ status =
+ acpi_ns_get_node(prefix_node, path, ACPI_NS_NO_UPSEARCH,
+ &node);
+ if (ACPI_FAILURE(status)) {
+ acpi_os_printf("[Could not get node by pathname]");
+ }
+ }
+
+ acpi_ns_print_node_pathname(node, message);
+ acpi_os_printf(", %s", acpi_format_exception(method_status));
+
+ ACPI_MSG_SUFFIX;
+ ACPI_MSG_REDIRECT_END;
+}
+
+#endif /* ACPI_NO_ERROR_MESSAGES */
depends on ACPI_APEI
help
ERST is a way provided by APEI to save and retrieve hardware
- error infomation to and from a persistent store. Enable this
+ error information to and from a persistent store. Enable this
if you want to debugging and testing the ERST kernel support
and firmware implementation.
int apei_resources_request(struct apei_resources *resources,
const char *desc)
{
- struct apei_res *res, *res_bak;
+ struct apei_res *res, *res_bak = NULL;
struct resource *r;
+ int rc;
- apei_resources_sub(resources, &apei_resources_all);
+ rc = apei_resources_sub(resources, &apei_resources_all);
+ if (rc)
+ return rc;
+ rc = -EINVAL;
list_for_each_entry(res, &resources->iomem, list) {
r = request_mem_region(res->start, res->end - res->start,
desc);
}
}
- apei_resources_merge(&apei_resources_all, resources);
+ rc = apei_resources_merge(&apei_resources_all, resources);
+ if (rc) {
+ pr_err(APEI_PFX "Fail to merge resources!\n");
+ goto err_unmap_ioport;
+ }
return 0;
err_unmap_ioport:
break;
release_mem_region(res->start, res->end - res->start);
}
- return -EINVAL;
+ return rc;
}
EXPORT_SYMBOL_GPL(apei_resources_request);
void apei_resources_release(struct apei_resources *resources)
{
+ int rc;
struct apei_res *res;
list_for_each_entry(res, &resources->iomem, list)
list_for_each_entry(res, &resources->ioport, list)
release_region(res->start, res->end - res->start);
- apei_resources_sub(&apei_resources_all, resources);
+ rc = apei_resources_sub(&apei_resources_all, resources);
+ if (rc)
+ pr_err(APEI_PFX "Fail to sub resources!\n");
}
EXPORT_SYMBOL_GPL(apei_resources_release);
static int einj_check_table(struct acpi_table_einj *einj_tab)
{
- if (einj_tab->header_length != sizeof(struct acpi_table_einj))
+ if ((einj_tab->header_length !=
+ (sizeof(struct acpi_table_einj) - sizeof(einj_tab->header)))
+ && (einj_tab->header_length != sizeof(struct acpi_table_einj)))
return -EINVAL;
if (einj_tab->header.length < sizeof(struct acpi_table_einj))
return -EINVAL;
* APEI Error Record Serialization Table debug support
*
* ERST is a way provided by APEI to save and retrieve hardware error
- * infomation to and from a persistent store. This file provide the
+ * information to and from a persistent store. This file provide the
* debugging/testing support for ERST kernel support and firmware
* implementation.
*
goto out;
}
if (len > erst_dbg_buf_len) {
- kfree(erst_dbg_buf);
+ void *p;
rc = -ENOMEM;
- erst_dbg_buf = kmalloc(len, GFP_KERNEL);
- if (!erst_dbg_buf)
+ p = kmalloc(len, GFP_KERNEL);
+ if (!p)
goto out;
+ kfree(erst_dbg_buf);
+ erst_dbg_buf = p;
erst_dbg_buf_len = len;
goto retry;
}
if (mutex_lock_interruptible(&erst_dbg_mutex))
return -EINTR;
if (usize > erst_dbg_buf_len) {
- kfree(erst_dbg_buf);
+ void *p;
rc = -ENOMEM;
- erst_dbg_buf = kmalloc(usize, GFP_KERNEL);
- if (!erst_dbg_buf)
+ p = kmalloc(usize, GFP_KERNEL);
+ if (!p)
goto out;
+ kfree(erst_dbg_buf);
+ erst_dbg_buf = p;
erst_dbg_buf_len = usize;
}
rc = copy_from_user(erst_dbg_buf, ubuf, usize);
* APEI Error Record Serialization Table support
*
* ERST is a way provided by APEI to save and retrieve hardware error
- * infomation to and from a persistent store.
+ * information to and from a persistent store.
*
* For more information about ERST, please refer to ACPI Specification
* version 4.0, section 17.4.
{
int rc;
u64 offset;
+ void *src, *dst;
+
+ /* ioremap does not work in interrupt context */
+ if (in_interrupt()) {
+ pr_warning(ERST_PFX
+ "MOVE_DATA can not be used in interrupt context");
+ return -EBUSY;
+ }
rc = __apei_exec_read_register(entry, &offset);
if (rc)
return rc;
- memmove((void *)ctx->dst_base + offset,
- (void *)ctx->src_base + offset,
- ctx->var2);
+
+ src = ioremap(ctx->src_base + offset, ctx->var2);
+ if (!src)
+ return -ENOMEM;
+ dst = ioremap(ctx->dst_base + offset, ctx->var2);
+ if (!dst)
+ return -ENOMEM;
+
+ memmove(dst, src, ctx->var2);
+
+ iounmap(src);
+ iounmap(dst);
return 0;
}
static int erst_check_table(struct acpi_table_erst *erst_tab)
{
- if (erst_tab->header_length != sizeof(struct acpi_table_erst))
+ if ((erst_tab->header_length !=
+ (sizeof(struct acpi_table_erst) - sizeof(erst_tab->header)))
+ && (erst_tab->header_length != sizeof(struct acpi_table_einj)))
return -EINVAL;
if (erst_tab->header.length < sizeof(struct acpi_table_erst))
return -EINVAL;
struct ghes *ghes = NULL;
int rc = -EINVAL;
- generic = ghes_dev->dev.platform_data;
+ generic = *(struct acpi_hest_generic **)ghes_dev->dev.platform_data;
if (!generic->enabled)
return -ENODEV;
static int hest_parse_ghes(struct acpi_hest_header *hest_hdr, void *data)
{
- struct acpi_hest_generic *generic;
struct platform_device *ghes_dev;
struct ghes_arr *ghes_arr = data;
int rc;
if (hest_hdr->type != ACPI_HEST_TYPE_GENERIC_ERROR)
return 0;
- generic = (struct acpi_hest_generic *)hest_hdr;
- if (!generic->enabled)
+
+ if (!((struct acpi_hest_generic *)hest_hdr)->enabled)
return 0;
ghes_dev = platform_device_alloc("GHES", hest_hdr->source_id);
if (!ghes_dev)
return -ENOMEM;
- ghes_dev->dev.platform_data = generic;
+
+ rc = platform_device_add_data(ghes_dev, &hest_hdr, sizeof(void *));
+ if (rc)
+ goto err;
+
rc = platform_device_add(ghes_dev);
if (rc)
goto err;
list_add_tail_rcu(&map->list, &acpi_iomaps);
spin_unlock_irqrestore(&acpi_iomaps_lock, flags);
- return vaddr + (paddr - pg_off);
+ return map->vaddr + (paddr - map->paddr);
err_unmap:
iounmap(vaddr);
return NULL;
#include <acpi/acpi_bus.h>
#include <acpi/acpi_drivers.h>
-
-#ifdef CONFIG_ACPI_SYSFS_POWER
#include <linux/power_supply.h>
-#endif
#define PREFIX "ACPI: "
* due to bad math.
*/
ACPI_BATTERY_QUIRK_SIGNED16_CURRENT,
+ ACPI_BATTERY_QUIRK_PERCENTAGE_CAPACITY,
};
struct acpi_battery {
struct mutex lock;
-#ifdef CONFIG_ACPI_SYSFS_POWER
struct power_supply bat;
-#endif
struct acpi_device *device;
unsigned long update_time;
int rate_now;
return battery->device->status.battery_present;
}
-#ifdef CONFIG_ACPI_SYSFS_POWER
static int acpi_battery_technology(struct acpi_battery *battery)
{
if (!strcasecmp("NiCd", battery->type))
enum power_supply_property psp,
union power_supply_propval *val)
{
+ int ret = 0;
struct acpi_battery *battery = to_acpi_battery(psy);
if (acpi_battery_present(battery)) {
val->intval = battery->cycle_count;
break;
case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN:
- val->intval = battery->design_voltage * 1000;
+ if (battery->design_voltage == ACPI_BATTERY_VALUE_UNKNOWN)
+ ret = -ENODEV;
+ else
+ val->intval = battery->design_voltage * 1000;
break;
case POWER_SUPPLY_PROP_VOLTAGE_NOW:
- val->intval = battery->voltage_now * 1000;
+ if (battery->voltage_now == ACPI_BATTERY_VALUE_UNKNOWN)
+ ret = -ENODEV;
+ else
+ val->intval = battery->voltage_now * 1000;
break;
case POWER_SUPPLY_PROP_CURRENT_NOW:
case POWER_SUPPLY_PROP_POWER_NOW:
- val->intval = battery->rate_now * 1000;
+ if (battery->rate_now == ACPI_BATTERY_VALUE_UNKNOWN)
+ ret = -ENODEV;
+ else
+ val->intval = battery->rate_now * 1000;
break;
case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN:
case POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN:
- val->intval = battery->design_capacity * 1000;
+ if (battery->design_capacity == ACPI_BATTERY_VALUE_UNKNOWN)
+ ret = -ENODEV;
+ else
+ val->intval = battery->design_capacity * 1000;
break;
case POWER_SUPPLY_PROP_CHARGE_FULL:
case POWER_SUPPLY_PROP_ENERGY_FULL:
- val->intval = battery->full_charge_capacity * 1000;
+ if (battery->full_charge_capacity == ACPI_BATTERY_VALUE_UNKNOWN)
+ ret = -ENODEV;
+ else
+ val->intval = battery->full_charge_capacity * 1000;
break;
case POWER_SUPPLY_PROP_CHARGE_NOW:
case POWER_SUPPLY_PROP_ENERGY_NOW:
- val->intval = battery->capacity_now * 1000;
+ if (battery->capacity_now == ACPI_BATTERY_VALUE_UNKNOWN)
+ ret = -ENODEV;
+ else
+ val->intval = battery->capacity_now * 1000;
break;
case POWER_SUPPLY_PROP_MODEL_NAME:
val->strval = battery->model_number;
val->strval = battery->serial_number;
break;
default:
- return -EINVAL;
+ ret = -EINVAL;
}
- return 0;
+ return ret;
}
static enum power_supply_property charge_battery_props[] = {
POWER_SUPPLY_PROP_CYCLE_COUNT,
POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN,
POWER_SUPPLY_PROP_VOLTAGE_NOW,
- POWER_SUPPLY_PROP_CURRENT_NOW,
POWER_SUPPLY_PROP_POWER_NOW,
POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN,
POWER_SUPPLY_PROP_ENERGY_FULL,
POWER_SUPPLY_PROP_MANUFACTURER,
POWER_SUPPLY_PROP_SERIAL_NUMBER,
};
-#endif
#ifdef CONFIG_ACPI_PROCFS_POWER
inline char *acpi_battery_units(struct acpi_battery *battery)
result = extract_package(battery, buffer.pointer,
info_offsets, ARRAY_SIZE(info_offsets));
kfree(buffer.pointer);
+ if (test_bit(ACPI_BATTERY_QUIRK_PERCENTAGE_CAPACITY, &battery->flags))
+ battery->full_charge_capacity = battery->design_capacity;
return result;
}
battery->rate_now != -1)
battery->rate_now = abs((s16)battery->rate_now);
+ if (test_bit(ACPI_BATTERY_QUIRK_PERCENTAGE_CAPACITY, &battery->flags)
+ && battery->capacity_now >= 0 && battery->capacity_now <= 100)
+ battery->capacity_now = (battery->capacity_now *
+ battery->full_charge_capacity) / 100;
return result;
}
return acpi_battery_set_alarm(battery);
}
-#ifdef CONFIG_ACPI_SYSFS_POWER
static ssize_t acpi_battery_alarm_show(struct device *dev,
struct device_attribute *attr,
char *buf)
power_supply_unregister(&battery->bat);
battery->bat.dev = NULL;
}
-#endif
static void acpi_battery_quirks(struct acpi_battery *battery)
{
}
}
+/*
+ * According to the ACPI spec, some kinds of primary batteries can
+ * report percentage battery remaining capacity directly to OS.
+ * In this case, it reports the Last Full Charged Capacity == 100
+ * and BatteryPresentRate == 0xFFFFFFFF.
+ *
+ * Now we found some battery reports percentage remaining capacity
+ * even if it's rechargeable.
+ * https://bugzilla.kernel.org/show_bug.cgi?id=15979
+ *
+ * Handle this correctly so that they won't break userspace.
+ */
+static void acpi_battery_quirks2(struct acpi_battery *battery)
+{
+ if (test_bit(ACPI_BATTERY_QUIRK_PERCENTAGE_CAPACITY, &battery->flags))
+ return ;
+
+ if (battery->full_charge_capacity == 100 &&
+ battery->rate_now == ACPI_BATTERY_VALUE_UNKNOWN &&
+ battery->capacity_now >=0 && battery->capacity_now <= 100) {
+ set_bit(ACPI_BATTERY_QUIRK_PERCENTAGE_CAPACITY, &battery->flags);
+ battery->full_charge_capacity = battery->design_capacity;
+ battery->capacity_now = (battery->capacity_now *
+ battery->full_charge_capacity) / 100;
+ }
+}
+
static int acpi_battery_update(struct acpi_battery *battery)
{
int result, old_present = acpi_battery_present(battery);
if (result)
return result;
if (!acpi_battery_present(battery)) {
-#ifdef CONFIG_ACPI_SYSFS_POWER
sysfs_remove_battery(battery);
-#endif
battery->update_time = 0;
return 0;
}
acpi_battery_quirks(battery);
acpi_battery_init_alarm(battery);
}
-#ifdef CONFIG_ACPI_SYSFS_POWER
if (!battery->bat.dev)
sysfs_add_battery(battery);
-#endif
- return acpi_battery_get_state(battery);
+ result = acpi_battery_get_state(battery);
+ acpi_battery_quirks2(battery);
+ return result;
}
/* --------------------------------------------------------------------------
static void acpi_battery_notify(struct acpi_device *device, u32 event)
{
struct acpi_battery *battery = acpi_driver_data(device);
-#ifdef CONFIG_ACPI_SYSFS_POWER
struct device *old;
-#endif
if (!battery)
return;
-#ifdef CONFIG_ACPI_SYSFS_POWER
old = battery->bat.dev;
-#endif
acpi_battery_update(battery);
acpi_bus_generate_proc_event(device, event,
acpi_battery_present(battery));
acpi_bus_generate_netlink_event(device->pnp.device_class,
dev_name(&device->dev), event,
acpi_battery_present(battery));
-#ifdef CONFIG_ACPI_SYSFS_POWER
/* acpi_battery_update could remove power_supply object */
if (old && battery->bat.dev)
power_supply_changed(&battery->bat);
-#endif
}
static int acpi_battery_add(struct acpi_device *device)
#ifdef CONFIG_ACPI_PROCFS_POWER
acpi_battery_remove_fs(device);
#endif
-#ifdef CONFIG_ACPI_SYSFS_POWER
sysfs_remove_battery(battery);
-#endif
mutex_destroy(&battery->lock);
kfree(battery);
return 0;
{
printk(KERN_NOTICE PREFIX "DMI detected: %s\n", d->ident);
acpi_osi_setup("!Windows 2006");
+ acpi_osi_setup("!Windows 2006 SP1");
+ acpi_osi_setup("!Windows 2006 SP2");
return 0;
}
static int __init dmi_disable_osi_win7(const struct dmi_system_id *d)
},
},
{
+ /*
+ * There have a NVIF method in MSI GX723 DSDT need call by Nvidia
+ * driver (e.g. nouveau) when user press brightness hotkey.
+ * Currently, nouveau driver didn't do the job and it causes there
+ * have a infinite while loop in DSDT when user press hotkey.
+ * We add MSI GX723's dmi information to this table for workaround
+ * this issue.
+ * Will remove MSI GX723 from the table after nouveau grows support.
+ */
+ .callback = dmi_disable_osi_vista,
+ .ident = "MSI GX723",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Micro-Star International"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "GX723"),
+ },
+ },
+ {
.callback = dmi_disable_osi_vista,
.ident = "Sony VGN-NS10J_S",
.matches = {
},
},
{
+ .callback = dmi_disable_osi_vista,
+ .ident = "Toshiba Satellite L355",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
+ DMI_MATCH(DMI_PRODUCT_VERSION, "Satellite L355"),
+ },
+ },
+ {
.callback = dmi_disable_osi_win7,
.ident = "ASUS K50IJ",
.matches = {
DMI_MATCH(DMI_PRODUCT_NAME, "K50IJ"),
},
},
+ {
+ .callback = dmi_disable_osi_vista,
+ .ident = "Toshiba P305D",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Satellite P305D"),
+ },
+ },
/*
* BIOS invocation of _OSI(Linux) is almost always a BIOS bug.
static int set_power_nocheck(const struct dmi_system_id *id)
{
printk(KERN_NOTICE PREFIX "%s detected - "
- "disable power check in power transistion\n", id->ident);
+ "disable power check in power transition\n", id->ident);
acpi_power_nocheck = 1;
return 0;
}
static struct dmi_system_id dsdt_dmi_table[] __initdata = {
/*
- * Insyde BIOS on some TOSHIBA machines corrupt the DSDT.
+ * Invoke DSDT corruption work-around on all Toshiba Satellite.
* https://bugzilla.kernel.org/show_bug.cgi?id=14679
*/
{
.callback = set_copy_dsdt,
- .ident = "TOSHIBA Satellite A505",
+ .ident = "TOSHIBA Satellite",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
- DMI_MATCH(DMI_PRODUCT_NAME, "Satellite A505"),
- },
- },
- {
- .callback = set_copy_dsdt,
- .ident = "TOSHIBA Satellite L505D",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
- DMI_MATCH(DMI_PRODUCT_NAME, "Satellite L505D"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Satellite"),
},
},
{}
/*
* If the laptop falls into the DMI check table, the power state check
- * will be disabled in the course of device power transistion.
+ * will be disabled in the course of device power transition.
*/
dmi_check_system(power_nocheck_dmi_table);
{
struct acpi_button *button;
struct input_dev *input;
- char *hid, *name, *class;
+ const char *hid = acpi_device_hid(device);
+ char *name, *class;
int error;
button = kzalloc(sizeof(struct acpi_button), GFP_KERNEL);
goto err_free_button;
}
- hid = acpi_device_hid(device);
name = acpi_device_name(device);
class = acpi_device_class(device);
#include <linux/module.h>
#include <linux/init.h>
#include <linux/types.h>
-#include <linux/proc_fs.h>
-#include <linux/seq_file.h>
#include <asm/uaccess.h>
#include <linux/thermal.h>
#include <acpi/acpi_bus.h>
.set_cur_state = fan_set_cur_state,
};
-/* --------------------------------------------------------------------------
- FS Interface (/proc)
- -------------------------------------------------------------------------- */
-#ifdef CONFIG_ACPI_PROCFS
-
-static struct proc_dir_entry *acpi_fan_dir;
-
-static int acpi_fan_read_state(struct seq_file *seq, void *offset)
-{
- struct acpi_device *device = seq->private;
- int state = 0;
-
-
- if (device) {
- if (acpi_bus_get_power(device->handle, &state))
- seq_printf(seq, "status: ERROR\n");
- else
- seq_printf(seq, "status: %s\n",
- !state ? "on" : "off");
- }
- return 0;
-}
-
-static int acpi_fan_state_open_fs(struct inode *inode, struct file *file)
-{
- return single_open(file, acpi_fan_read_state, PDE(inode)->data);
-}
-
-static ssize_t
-acpi_fan_write_state(struct file *file, const char __user * buffer,
- size_t count, loff_t * ppos)
-{
- int result = 0;
- struct seq_file *m = file->private_data;
- struct acpi_device *device = m->private;
- char state_string[3] = { '\0' };
-
- if (count > sizeof(state_string) - 1)
- return -EINVAL;
-
- if (copy_from_user(state_string, buffer, count))
- return -EFAULT;
-
- state_string[count] = '\0';
- if ((state_string[0] < '0') || (state_string[0] > '3'))
- return -EINVAL;
- if (state_string[1] == '\n')
- state_string[1] = '\0';
- if (state_string[1] != '\0')
- return -EINVAL;
-
- result = acpi_bus_set_power(device->handle,
- simple_strtoul(state_string, NULL, 0));
- if (result)
- return result;
-
- return count;
-}
-
-static const struct file_operations acpi_fan_state_ops = {
- .open = acpi_fan_state_open_fs,
- .read = seq_read,
- .write = acpi_fan_write_state,
- .llseek = seq_lseek,
- .release = single_release,
- .owner = THIS_MODULE,
-};
-
-static int acpi_fan_add_fs(struct acpi_device *device)
-{
- struct proc_dir_entry *entry = NULL;
-
-
- if (!device)
- return -EINVAL;
-
- if (!acpi_device_dir(device)) {
- acpi_device_dir(device) = proc_mkdir(acpi_device_bid(device),
- acpi_fan_dir);
- if (!acpi_device_dir(device))
- return -ENODEV;
- }
-
- /* 'status' [R/W] */
- entry = proc_create_data(ACPI_FAN_FILE_STATE,
- S_IFREG | S_IRUGO | S_IWUSR,
- acpi_device_dir(device),
- &acpi_fan_state_ops,
- device);
- if (!entry)
- return -ENODEV;
- return 0;
-}
-
-static int acpi_fan_remove_fs(struct acpi_device *device)
-{
-
- if (acpi_device_dir(device)) {
- remove_proc_entry(ACPI_FAN_FILE_STATE, acpi_device_dir(device));
- remove_proc_entry(acpi_device_bid(device), acpi_fan_dir);
- acpi_device_dir(device) = NULL;
- }
-
- return 0;
-}
-#else
-static int acpi_fan_add_fs(struct acpi_device *device)
-{
- return 0;
-}
-
-static int acpi_fan_remove_fs(struct acpi_device *device)
-{
- return 0;
-}
-#endif
/* --------------------------------------------------------------------------
Driver Interface
-------------------------------------------------------------------------- */
dev_err(&device->dev, "Failed to create sysfs link "
"'device'\n");
- result = acpi_fan_add_fs(device);
- if (result)
- goto end;
-
printk(KERN_INFO PREFIX "%s [%s] (%s)\n",
acpi_device_name(device), acpi_device_bid(device),
!device->power.state ? "on" : "off");
if (!device || !cdev)
return -EINVAL;
- acpi_fan_remove_fs(device);
sysfs_remove_link(&device->dev.kobj, "thermal_cooling");
sysfs_remove_link(&cdev->device.kobj, "device");
thermal_cooling_device_unregister(cdev);
{
int result = 0;
-#ifdef CONFIG_ACPI_PROCFS
- acpi_fan_dir = proc_mkdir(ACPI_FAN_CLASS, acpi_root_dir);
- if (!acpi_fan_dir)
- return -ENODEV;
-#endif
-
result = acpi_bus_register_driver(&acpi_fan_driver);
- if (result < 0) {
-#ifdef CONFIG_ACPI_PROCFS
- remove_proc_entry(ACPI_FAN_CLASS, acpi_root_dir);
-#endif
+ if (result < 0)
return -ENODEV;
- }
return 0;
}
acpi_bus_unregister_driver(&acpi_fan_driver);
- remove_proc_entry(ACPI_FAN_CLASS, acpi_root_dir);
-
return;
}
static DEFINE_SPINLOCK(acpi_res_lock);
#define OSI_STRING_LENGTH_MAX 64 /* arbitrary */
-static char osi_additional_string[OSI_STRING_LENGTH_MAX];
+static char osi_setup_string[OSI_STRING_LENGTH_MAX];
+
+static void __init acpi_osi_setup_late(void);
/*
* The story of _OSI(Linux)
unsigned int known:1;
} osi_linux = { 0, 0, 0, 0};
+static u32 acpi_osi_handler(acpi_string interface, u32 supported)
+{
+ if (!strcmp("Linux", interface)) {
+
+ printk(KERN_NOTICE FW_BUG PREFIX
+ "BIOS _OSI(Linux) query %s%s\n",
+ osi_linux.enable ? "honored" : "ignored",
+ osi_linux.cmdline ? " via cmdline" :
+ osi_linux.dmi ? " via DMI" : "");
+ }
+
+ return supported;
+}
+
static void __init acpi_request_region (struct acpi_generic_address *addr,
unsigned int length, char *desc)
{
BUG_ON(!kacpid_wq);
BUG_ON(!kacpi_notify_wq);
BUG_ON(!kacpi_hotplug_wq);
+ acpi_install_interface_handler(acpi_osi_handler);
+ acpi_osi_setup_late();
return AE_OK;
}
acpi_status
acpi_os_read_pci_configuration(struct acpi_pci_id * pci_id, u32 reg,
- u32 *value, u32 width)
+ u64 *value, u32 width)
{
int result, size;
+ u32 value32;
if (!value)
return AE_BAD_PARAMETER;
result = raw_pci_read(pci_id->segment, pci_id->bus,
PCI_DEVFN(pci_id->device, pci_id->function),
- reg, size, value);
+ reg, size, &value32);
+ *value = value32;
return (result ? AE_ERROR : AE_OK);
}
return (result ? AE_ERROR : AE_OK);
}
-/* TODO: Change code to take advantage of driver model more */
-static void acpi_os_derive_pci_id_2(acpi_handle rhandle, /* upper bound */
- acpi_handle chandle, /* current node */
- struct acpi_pci_id **id,
- int *is_bridge, u8 * bus_number)
-{
- acpi_handle handle;
- struct acpi_pci_id *pci_id = *id;
- acpi_status status;
- unsigned long long temp;
- acpi_object_type type;
-
- acpi_get_parent(chandle, &handle);
- if (handle != rhandle) {
- acpi_os_derive_pci_id_2(rhandle, handle, &pci_id, is_bridge,
- bus_number);
-
- status = acpi_get_type(handle, &type);
- if ((ACPI_FAILURE(status)) || (type != ACPI_TYPE_DEVICE))
- return;
-
- status = acpi_evaluate_integer(handle, METHOD_NAME__ADR, NULL,
- &temp);
- if (ACPI_SUCCESS(status)) {
- u32 val;
- pci_id->device = ACPI_HIWORD(ACPI_LODWORD(temp));
- pci_id->function = ACPI_LOWORD(ACPI_LODWORD(temp));
-
- if (*is_bridge)
- pci_id->bus = *bus_number;
-
- /* any nicer way to get bus number of bridge ? */
- status =
- acpi_os_read_pci_configuration(pci_id, 0x0e, &val,
- 8);
- if (ACPI_SUCCESS(status)
- && ((val & 0x7f) == 1 || (val & 0x7f) == 2)) {
- status =
- acpi_os_read_pci_configuration(pci_id, 0x18,
- &val, 8);
- if (!ACPI_SUCCESS(status)) {
- /* Certainly broken... FIX ME */
- return;
- }
- *is_bridge = 1;
- pci_id->bus = val;
- status =
- acpi_os_read_pci_configuration(pci_id, 0x19,
- &val, 8);
- if (ACPI_SUCCESS(status)) {
- *bus_number = val;
- }
- } else
- *is_bridge = 0;
- }
- }
-}
-
-void acpi_os_derive_pci_id(acpi_handle rhandle, /* upper bound */
- acpi_handle chandle, /* current node */
- struct acpi_pci_id **id)
-{
- int is_bridge = 1;
- u8 bus_number = (*id)->bus;
-
- acpi_os_derive_pci_id_2(rhandle, chandle, id, &is_bridge, &bus_number);
-}
-
static void acpi_os_execute_deferred(struct work_struct *work)
{
struct acpi_os_dpc *dpc = container_of(work, struct acpi_os_dpc, work);
printk(KERN_NOTICE PREFIX "%sed _OSI(Linux)\n",
enable ? "Add": "Delet");
}
+
+ if (osi_linux.enable)
+ acpi_osi_setup("Linux");
+ else
+ acpi_osi_setup("!Linux");
+
return;
}
* string starting with '!' disables that string
* otherwise string is added to list, augmenting built-in strings
*/
-int __init acpi_osi_setup(char *str)
+static void __init acpi_osi_setup_late(void)
{
- if (str == NULL || *str == '\0') {
- printk(KERN_INFO PREFIX "_OSI method disabled\n");
- acpi_gbl_create_osi_method = FALSE;
- } else if (!strcmp("!Linux", str)) {
+ char *str = osi_setup_string;
+
+ if (*str == '\0')
+ return;
+
+ if (!strcmp("!Linux", str)) {
acpi_cmdline_osi_linux(0); /* !enable */
} else if (*str == '!') {
- if (acpi_osi_invalidate(++str) == AE_OK)
+ if (acpi_remove_interface(++str) == AE_OK)
printk(KERN_INFO PREFIX "Deleted _OSI(%s)\n", str);
} else if (!strcmp("Linux", str)) {
acpi_cmdline_osi_linux(1); /* enable */
- } else if (*osi_additional_string == '\0') {
- strncpy(osi_additional_string, str, OSI_STRING_LENGTH_MAX);
- printk(KERN_INFO PREFIX "Added _OSI(%s)\n", str);
+ } else {
+ if (acpi_install_interface(str) == AE_OK)
+ printk(KERN_INFO PREFIX "Added _OSI(%s)\n", str);
+ }
+}
+
+int __init acpi_osi_setup(char *str)
+{
+ if (str == NULL || *str == '\0') {
+ printk(KERN_INFO PREFIX "_OSI method disabled\n");
+ acpi_gbl_create_osi_method = FALSE;
+ } else {
+ strncpy(osi_setup_string, str, OSI_STRING_LENGTH_MAX);
}
return 1;
return (AE_OK);
}
-/******************************************************************************
- *
- * FUNCTION: acpi_os_validate_interface
- *
- * PARAMETERS: interface - Requested interface to be validated
- *
- * RETURN: AE_OK if interface is supported, AE_SUPPORT otherwise
- *
- * DESCRIPTION: Match an interface string to the interfaces supported by the
- * host. Strings originate from an AML call to the _OSI method.
- *
- *****************************************************************************/
-
-acpi_status
-acpi_os_validate_interface (char *interface)
-{
- if (!strncmp(osi_additional_string, interface, OSI_STRING_LENGTH_MAX))
- return AE_OK;
- if (!strcmp("Linux", interface)) {
-
- printk(KERN_NOTICE PREFIX
- "BIOS _OSI(Linux) query %s%s\n",
- osi_linux.enable ? "honored" : "ignored",
- osi_linux.cmdline ? " via cmdline" :
- osi_linux.dmi ? " via DMI" : "");
-
- if (osi_linux.enable)
- return AE_OK;
- }
- return AE_SUPPORT;
-}
-
static inline int acpi_res_list_add(struct acpi_res_list *res)
{
struct acpi_res_list *res_list_elem;
#include <linux/module.h>
#include <linux/init.h>
#include <linux/types.h>
-#include <linux/proc_fs.h>
#include <linux/spinlock.h>
#include <linux/pm.h>
#include <linux/pci.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/types.h>
-#include <linux/proc_fs.h>
#include <linux/spinlock.h>
#include <linux/pm.h>
#include <linux/pci.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/types.h>
-#include <linux/proc_fs.h>
#include <linux/spinlock.h>
#include <linux/pm.h>
#include <linux/pm_runtime.h>
}
static struct dmi_system_id __cpuinitdata processor_idle_dmi_table[] = {
- {
- set_no_mwait, "IFL91 board", {
- DMI_MATCH(DMI_BIOS_VENDOR, "COMPAL"),
- DMI_MATCH(DMI_SYS_VENDOR, "ZEPTO"),
- DMI_MATCH(DMI_PRODUCT_VERSION, "3215W"),
- DMI_MATCH(DMI_BOARD_NAME, "IFL91") }, NULL},
{
set_no_mwait, "Extensa 5220", {
DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies LTD"),
acpi_walk_namespace(ACPI_TYPE_PROCESSOR, ACPI_ROOT_OBJECT,
ACPI_UINT32_MAX,
early_init_pdc, NULL, NULL, NULL);
+ acpi_get_devices("ACPI0007", early_init_pdc, NULL, NULL);
}
#include <linux/pm.h>
#include <linux/cpufreq.h>
#include <linux/cpu.h>
+#ifdef CONFIG_ACPI_PROCFS
#include <linux/proc_fs.h>
#include <linux/seq_file.h>
+#endif
#include <linux/dmi.h>
#include <linux/moduleparam.h>
#include <linux/cpuidle.h>
return result;
}
+#ifdef CONFIG_ACPI_PROCFS
static struct proc_dir_entry *acpi_processor_dir = NULL;
static int __cpuinit acpi_processor_add_fs(struct acpi_device *device)
return 0;
}
-
+#else
+static inline int acpi_processor_add_fs(struct acpi_device *device)
+{
+ return 0;
+}
+static inline int acpi_processor_remove_fs(struct acpi_device *device)
+{
+ return 0;
+}
+#endif
/* --------------------------------------------------------------------------
Driver Interface
-------------------------------------------------------------------------- */
memset(&errata, 0, sizeof(errata));
+#ifdef CONFIG_ACPI_PROCFS
acpi_processor_dir = proc_mkdir(ACPI_PROCESSOR_CLASS, acpi_root_dir);
if (!acpi_processor_dir)
return -ENOMEM;
+#endif
if (!cpuidle_register_driver(&acpi_idle_driver)) {
printk(KERN_DEBUG "ACPI: %s registered with cpuidle\n",
acpi_idle_driver.name);
} else {
- printk(KERN_DEBUG "ACPI: acpi_idle yielding to %s",
+ printk(KERN_DEBUG "ACPI: acpi_idle yielding to %s\n",
cpuidle_get_driver()->name);
}
out_cpuidle:
cpuidle_unregister_driver(&acpi_idle_driver);
+#ifdef CONFIG_ACPI_PROCFS
remove_proc_entry(ACPI_PROCESSOR_CLASS, acpi_root_dir);
+#endif
return result;
}
cpuidle_unregister_driver(&acpi_idle_driver);
+#ifdef CONFIG_ACPI_PROCFS
remove_proc_entry(ACPI_PROCESSOR_CLASS, acpi_root_dir);
+#endif
return;
}
if (!try_module_get(calling_module))
return -EINVAL;
- /* is_done is set to negative if an error occured,
- * and to postitive if _no_ error occured, but SMM
+ /* is_done is set to negative if an error occurred,
+ * and to postitive if _no_ error occurred, but SMM
* was already notified. This avoids double notification
* which might lead to unexpected results...
*/
#include <linux/init.h>
#include <linux/sched.h>
#include <linux/cpufreq.h>
+#ifdef CONFIG_ACPI_PROCFS
#include <linux/proc_fs.h>
#include <linux/seq_file.h>
+#endif
#include <asm/io.h>
#include <asm/uaccess.h>
return result;
}
+#ifdef CONFIG_ACPI_PROCFS
/* proc interface */
static int acpi_processor_throttling_seq_show(struct seq_file *seq,
void *offset)
.llseek = seq_lseek,
.release = single_release,
};
+#endif
#include <linux/timer.h>
#include <linux/jiffies.h>
#include <linux/delay.h>
-
-#ifdef CONFIG_ACPI_SYSFS_POWER
#include <linux/power_supply.h>
-#endif
#include "sbshc.h"
MODULE_DEVICE_TABLE(acpi, sbs_device_ids);
struct acpi_battery {
-#ifdef CONFIG_ACPI_SYSFS_POWER
struct power_supply bat;
-#endif
struct acpi_sbs *sbs;
#ifdef CONFIG_ACPI_PROCFS_POWER
struct proc_dir_entry *proc_entry;
#define to_acpi_battery(x) container_of(x, struct acpi_battery, bat);
struct acpi_sbs {
-#ifdef CONFIG_ACPI_SYSFS_POWER
struct power_supply charger;
-#endif
struct acpi_device *device;
struct acpi_smb_hc *hc;
struct mutex lock;
acpi_battery_ipscale(battery);
}
-#ifdef CONFIG_ACPI_SYSFS_POWER
static int sbs_get_ac_property(struct power_supply *psy,
enum power_supply_property psp,
union power_supply_propval *val)
POWER_SUPPLY_PROP_MANUFACTURER,
};
-#endif
/* --------------------------------------------------------------------------
Smart Battery System Management
return result;
}
-#ifdef CONFIG_ACPI_SYSFS_POWER
static ssize_t acpi_battery_alarm_show(struct device *dev,
struct device_attribute *attr,
char *buf)
.show = acpi_battery_alarm_show,
.store = acpi_battery_alarm_store,
};
-#endif
/* --------------------------------------------------------------------------
FS Interface (/proc/acpi)
&acpi_battery_state_fops, &acpi_battery_alarm_fops,
battery);
#endif
-#ifdef CONFIG_ACPI_SYSFS_POWER
battery->bat.name = battery->name;
battery->bat.type = POWER_SUPPLY_TYPE_BATTERY;
if (!acpi_battery_mode(battery)) {
goto end;
battery->have_sysfs_alarm = 1;
end:
-#endif
printk(KERN_INFO PREFIX "%s [%s]: Battery Slot [%s] (battery %s)\n",
ACPI_SBS_DEVICE_NAME, acpi_device_bid(sbs->device),
battery->name, battery->present ? "present" : "absent");
static void acpi_battery_remove(struct acpi_sbs *sbs, int id)
{
-#if defined(CONFIG_ACPI_SYSFS_POWER) || defined(CONFIG_ACPI_PROCFS_POWER)
struct acpi_battery *battery = &sbs->battery[id];
-#endif
-#ifdef CONFIG_ACPI_SYSFS_POWER
if (battery->bat.dev) {
if (battery->have_sysfs_alarm)
device_remove_file(battery->bat.dev, &alarm_attr);
power_supply_unregister(&battery->bat);
}
-#endif
#ifdef CONFIG_ACPI_PROCFS_POWER
if (battery->proc_entry)
acpi_sbs_remove_fs(&battery->proc_entry, acpi_battery_dir);
if (result)
goto end;
#endif
-#ifdef CONFIG_ACPI_SYSFS_POWER
sbs->charger.name = "sbs-charger";
sbs->charger.type = POWER_SUPPLY_TYPE_MAINS;
sbs->charger.properties = sbs_ac_props;
sbs->charger.num_properties = ARRAY_SIZE(sbs_ac_props);
sbs->charger.get_property = sbs_get_ac_property;
power_supply_register(&sbs->device->dev, &sbs->charger);
-#endif
printk(KERN_INFO PREFIX "%s [%s]: AC Adapter [%s] (%s)\n",
ACPI_SBS_DEVICE_NAME, acpi_device_bid(sbs->device),
ACPI_AC_DIR_NAME, sbs->charger_present ? "on-line" : "off-line");
static void acpi_charger_remove(struct acpi_sbs *sbs)
{
-#ifdef CONFIG_ACPI_SYSFS_POWER
if (sbs->charger.dev)
power_supply_unregister(&sbs->charger);
-#endif
#ifdef CONFIG_ACPI_PROCFS_POWER
if (sbs->charger_entry)
acpi_sbs_remove_fs(&sbs->charger_entry, acpi_ac_dir);
ACPI_SBS_NOTIFY_STATUS,
sbs->charger_present);
#endif
-#ifdef CONFIG_ACPI_SYSFS_POWER
kobject_uevent(&sbs->charger.dev->kobj, KOBJ_CHANGE);
-#endif
}
if (sbs->manager_present) {
for (id = 0; id < MAX_SBS_BAT; ++id) {
ACPI_SBS_NOTIFY_STATUS,
bat->present);
#endif
-#ifdef CONFIG_ACPI_SYSFS_POWER
kobject_uevent(&bat->bat.dev->kobj, KOBJ_CHANGE);
-#endif
}
}
}
#define ACPI_IS_ROOT_DEVICE(device) (!(device)->parent)
+static const char *dummy_hid = "device";
+
static LIST_HEAD(acpi_device_list);
static LIST_HEAD(acpi_bus_id_list);
DEFINE_MUTEX(acpi_device_lock);
int count;
struct acpi_hardware_id *id;
+ if (list_empty(&acpi_dev->pnp.ids))
+ return 0;
+
len = snprintf(modalias, size, "acpi:");
size -= len;
goto end;
}
- result = device_create_file(&dev->dev, &dev_attr_hid);
- if (result)
- goto end;
+ if (!list_empty(&dev->pnp.ids)) {
+ result = device_create_file(&dev->dev, &dev_attr_hid);
+ if (result)
+ goto end;
- result = device_create_file(&dev->dev, &dev_attr_modalias);
- if (result)
- goto end;
+ result = device_create_file(&dev->dev, &dev_attr_modalias);
+ if (result)
+ goto end;
+ }
/*
* If device has _EJ0, 'eject' file is created that is used to trigger
struct acpi_device *acpi_dev = to_acpi_device(dev);
int len;
+ if (list_empty(&acpi_dev->pnp.ids))
+ return 0;
+
if (add_uevent_var(env, "MODALIAS="))
return -ENOMEM;
len = create_modalias(acpi_dev, &env->buf[env->buflen - 1],
return acpi_get_handle(device->handle, "_DCK", &tmp);
}
-char *acpi_device_hid(struct acpi_device *device)
+const char *acpi_device_hid(struct acpi_device *device)
{
struct acpi_hardware_id *hid;
+ if (list_empty(&device->pnp.ids))
+ return dummy_hid;
+
hid = list_first_entry(&device->pnp.ids, struct acpi_hardware_id, list);
return hid->id;
}
acpi_add_id(device, ACPI_BUTTON_HID_SLEEPF);
break;
}
-
- /*
- * We build acpi_devices for some objects that don't have _HID or _CID,
- * e.g., PCI bridges and slots. Drivers can't bind to these objects,
- * but we do use them indirectly by traversing the acpi_device tree.
- * This generic ID isn't useful for driver binding, but it provides
- * the useful property that "every acpi_device has an ID."
- */
- if (list_empty(&device->pnp.ids))
- acpi_add_id(device, "device");
}
static int acpi_device_set_context(struct acpi_device *device)
u8 sleep_states[ACPI_S_STATE_COUNT];
+static u32 acpi_target_sleep_state = ACPI_STATE_S0;
+
static void acpi_sleep_tts_switch(u32 acpi_state)
{
union acpi_object in_arg = { ACPI_TYPE_INTEGER };
}
#ifdef CONFIG_ACPI_SLEEP
-static u32 acpi_target_sleep_state = ACPI_STATE_S0;
-
/*
* The ACPI specification wants us to save NVS memory regions during hibernation
* and to restore them during the subsequent resume. Windows does that also for
return 0;
}
+static int __init init_nvs_nosave(const struct dmi_system_id *d)
+{
+ acpi_nvs_nosave();
+ return 0;
+}
+
static struct dmi_system_id __initdata acpisleep_dmi_table[] = {
{
.callback = init_old_suspend_ordering,
DMI_MATCH(DMI_BOARD_NAME, "CF51-2L"),
},
},
+ {
+ .callback = init_nvs_nosave,
+ .ident = "Sony Vaio VGN-SR11M",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "VGN-SR11M"),
+ },
+ },
+ {
+ .callback = init_nvs_nosave,
+ .ident = "Everex StepNote Series",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Everex Systems, Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Everex StepNote Series"),
+ },
+ },
{},
};
#endif /* CONFIG_SUSPEND */
return -EINVAL;
}
-#ifdef CONFIG_PM_SLEEP
+#ifdef CONFIG_PM_OPS
/**
* acpi_pm_device_sleep_state - return preferred power state of ACPI device
* in the system sleep state given by %acpi_target_sleep_state
* can wake the system. _S0W may be valid, too.
*/
if (acpi_target_sleep_state == ACPI_STATE_S0 ||
- (device_may_wakeup(dev) && adev->wakeup.state.enabled &&
+ (device_may_wakeup(dev) &&
adev->wakeup.sleep_state <= acpi_target_sleep_state)) {
acpi_status status;
status = acpi_evaluate_integer(handle, acpi_method, NULL,
&d_max);
if (ACPI_FAILURE(status)) {
- d_max = d_min;
+ if (acpi_target_sleep_state != ACPI_STATE_S0 ||
+ status != AE_NOT_FOUND)
+ d_max = d_min;
} else if (d_max < d_min) {
/* Warn the user of the broken DSDT */
printk(KERN_WARNING "ACPI: Wrong value from %s\n",
*d_min_p = d_min;
return d_max;
}
+#endif /* CONFIG_PM_OPS */
+#ifdef CONFIG_PM_SLEEP
/**
* acpi_pm_device_sleep_wake - enable or disable the system wake-up
* capability of given device
return error;
}
-#endif
+#endif /* CONFIG_PM_SLEEP */
static void acpi_power_off_prepare(void)
{
ACPI_DEBUG_INIT(ACPI_LV_EVENTS),
};
-static int param_get_debug_layer(char *buffer, struct kernel_param *kp)
+static int param_get_debug_layer(char *buffer, const struct kernel_param *kp)
{
int result = 0;
int i;
return result;
}
-static int param_get_debug_level(char *buffer, struct kernel_param *kp)
+static int param_get_debug_level(char *buffer, const struct kernel_param *kp)
{
int result = 0;
int i;
return result;
}
-module_param_call(debug_layer, param_set_uint, param_get_debug_layer,
- &acpi_dbg_layer, 0644);
-module_param_call(debug_level, param_set_uint, param_get_debug_level,
- &acpi_dbg_level, 0644);
+static struct kernel_param_ops param_ops_debug_layer = {
+ .set = param_set_uint,
+ .get = param_get_debug_layer,
+};
+
+static struct kernel_param_ops param_ops_debug_level = {
+ .set = param_set_uint,
+ .get = param_get_debug_level,
+};
+
+module_param_cb(debug_layer, ¶m_ops_debug_layer, &acpi_dbg_layer, 0644);
+module_param_cb(debug_level, ¶m_ops_debug_level, &acpi_dbg_level, 0644);
static char trace_method_name[6];
module_param_string(trace_method_name, trace_method_name, 6, 0644);
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/types.h>
-
-#ifdef CONFIG_ACPI_PROCFS
-#include <linux/proc_fs.h>
-#include <linux/seq_file.h>
-#endif
-
#include <linux/jiffies.h>
#include <linux/kmod.h>
#include <linux/reboot.h>
struct mutex lock;
};
-#ifdef CONFIG_ACPI_PROCFS
-static int acpi_thermal_state_open_fs(struct inode *inode, struct file *file);
-static int acpi_thermal_temp_open_fs(struct inode *inode, struct file *file);
-static int acpi_thermal_trip_open_fs(struct inode *inode, struct file *file);
-static int acpi_thermal_cooling_open_fs(struct inode *inode, struct file *file);
-static ssize_t acpi_thermal_write_cooling_mode(struct file *,
- const char __user *, size_t,
- loff_t *);
-static int acpi_thermal_polling_open_fs(struct inode *inode, struct file *file);
-static ssize_t acpi_thermal_write_polling(struct file *, const char __user *,
- size_t, loff_t *);
-
-static const struct file_operations acpi_thermal_state_fops = {
- .owner = THIS_MODULE,
- .open = acpi_thermal_state_open_fs,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = single_release,
-};
-
-static const struct file_operations acpi_thermal_temp_fops = {
- .owner = THIS_MODULE,
- .open = acpi_thermal_temp_open_fs,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = single_release,
-};
-
-static const struct file_operations acpi_thermal_trip_fops = {
- .owner = THIS_MODULE,
- .open = acpi_thermal_trip_open_fs,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = single_release,
-};
-
-static const struct file_operations acpi_thermal_cooling_fops = {
- .owner = THIS_MODULE,
- .open = acpi_thermal_cooling_open_fs,
- .read = seq_read,
- .write = acpi_thermal_write_cooling_mode,
- .llseek = seq_lseek,
- .release = single_release,
-};
-
-static const struct file_operations acpi_thermal_polling_fops = {
- .owner = THIS_MODULE,
- .open = acpi_thermal_polling_open_fs,
- .read = seq_read,
- .write = acpi_thermal_write_polling,
- .llseek = seq_lseek,
- .release = single_release,
-};
-#endif /* CONFIG_ACPI_PROCFS*/
-
/* --------------------------------------------------------------------------
Thermal Zone Management
-------------------------------------------------------------------------- */
}
-/* --------------------------------------------------------------------------
- FS Interface (/proc)
- -------------------------------------------------------------------------- */
-#ifdef CONFIG_ACPI_PROCFS
-static struct proc_dir_entry *acpi_thermal_dir;
-
-static int acpi_thermal_state_seq_show(struct seq_file *seq, void *offset)
-{
- struct acpi_thermal *tz = seq->private;
-
-
- if (!tz)
- goto end;
-
- seq_puts(seq, "state: ");
-
- if (!tz->state.critical && !tz->state.hot && !tz->state.passive
- && !tz->state.active)
- seq_puts(seq, "ok\n");
- else {
- if (tz->state.critical)
- seq_puts(seq, "critical ");
- if (tz->state.hot)
- seq_puts(seq, "hot ");
- if (tz->state.passive)
- seq_puts(seq, "passive ");
- if (tz->state.active)
- seq_printf(seq, "active[%d]", tz->state.active_index);
- seq_puts(seq, "\n");
- }
-
- end:
- return 0;
-}
-
-static int acpi_thermal_state_open_fs(struct inode *inode, struct file *file)
-{
- return single_open(file, acpi_thermal_state_seq_show, PDE(inode)->data);
-}
-
-static int acpi_thermal_temp_seq_show(struct seq_file *seq, void *offset)
-{
- int result = 0;
- struct acpi_thermal *tz = seq->private;
-
-
- if (!tz)
- goto end;
-
- result = acpi_thermal_get_temperature(tz);
- if (result)
- goto end;
-
- seq_printf(seq, "temperature: %ld C\n",
- KELVIN_TO_CELSIUS(tz->temperature));
-
- end:
- return 0;
-}
-
-static int acpi_thermal_temp_open_fs(struct inode *inode, struct file *file)
-{
- return single_open(file, acpi_thermal_temp_seq_show, PDE(inode)->data);
-}
-
-static int acpi_thermal_trip_seq_show(struct seq_file *seq, void *offset)
-{
- struct acpi_thermal *tz = seq->private;
- struct acpi_device *device;
- acpi_status status;
-
- int i = 0;
- int j = 0;
-
-
- if (!tz)
- goto end;
-
- if (tz->trips.critical.flags.valid)
- seq_printf(seq, "critical (S5): %ld C%s",
- KELVIN_TO_CELSIUS(tz->trips.critical.temperature),
- nocrt ? " <disabled>\n" : "\n");
-
- if (tz->trips.hot.flags.valid)
- seq_printf(seq, "hot (S4): %ld C%s",
- KELVIN_TO_CELSIUS(tz->trips.hot.temperature),
- nocrt ? " <disabled>\n" : "\n");
-
- if (tz->trips.passive.flags.valid) {
- seq_printf(seq,
- "passive: %ld C: tc1=%lu tc2=%lu tsp=%lu devices=",
- KELVIN_TO_CELSIUS(tz->trips.passive.temperature),
- tz->trips.passive.tc1, tz->trips.passive.tc2,
- tz->trips.passive.tsp);
- for (j = 0; j < tz->trips.passive.devices.count; j++) {
- status = acpi_bus_get_device(tz->trips.passive.devices.
- handles[j], &device);
- seq_printf(seq, "%4.4s ", status ? "" :
- acpi_device_bid(device));
- }
- seq_puts(seq, "\n");
- } else {
- seq_printf(seq, "passive (forced):");
- if (tz->thermal_zone->forced_passive)
- seq_printf(seq, " %i C\n",
- tz->thermal_zone->forced_passive / 1000);
- else
- seq_printf(seq, "<not set>\n");
- }
-
- for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE; i++) {
- if (!(tz->trips.active[i].flags.valid))
- break;
- seq_printf(seq, "active[%d]: %ld C: devices=",
- i,
- KELVIN_TO_CELSIUS(tz->trips.active[i].temperature));
- for (j = 0; j < tz->trips.active[i].devices.count; j++){
- status = acpi_bus_get_device(tz->trips.active[i].
- devices.handles[j],
- &device);
- seq_printf(seq, "%4.4s ", status ? "" :
- acpi_device_bid(device));
- }
- seq_puts(seq, "\n");
- }
-
- end:
- return 0;
-}
-
-static int acpi_thermal_trip_open_fs(struct inode *inode, struct file *file)
-{
- return single_open(file, acpi_thermal_trip_seq_show, PDE(inode)->data);
-}
-
-static int acpi_thermal_cooling_seq_show(struct seq_file *seq, void *offset)
-{
- struct acpi_thermal *tz = seq->private;
-
-
- if (!tz)
- goto end;
-
- if (!tz->flags.cooling_mode)
- seq_puts(seq, "<setting not supported>\n");
- else
- seq_puts(seq, "0 - Active; 1 - Passive\n");
-
- end:
- return 0;
-}
-
-static int acpi_thermal_cooling_open_fs(struct inode *inode, struct file *file)
-{
- return single_open(file, acpi_thermal_cooling_seq_show,
- PDE(inode)->data);
-}
-
-static ssize_t
-acpi_thermal_write_cooling_mode(struct file *file,
- const char __user * buffer,
- size_t count, loff_t * ppos)
-{
- struct seq_file *m = file->private_data;
- struct acpi_thermal *tz = m->private;
- int result = 0;
- char mode_string[12] = { '\0' };
-
-
- if (!tz || (count > sizeof(mode_string) - 1))
- return -EINVAL;
-
- if (!tz->flags.cooling_mode)
- return -ENODEV;
-
- if (copy_from_user(mode_string, buffer, count))
- return -EFAULT;
-
- mode_string[count] = '\0';
-
- result = acpi_thermal_set_cooling_mode(tz,
- simple_strtoul(mode_string, NULL,
- 0));
- if (result)
- return result;
-
- acpi_thermal_check(tz);
-
- return count;
-}
-
-static int acpi_thermal_polling_seq_show(struct seq_file *seq, void *offset)
-{
- struct acpi_thermal *tz = seq->private;
-
-
- if (!tz)
- goto end;
-
- if (!tz->thermal_zone->polling_delay) {
- seq_puts(seq, "<polling disabled>\n");
- goto end;
- }
-
- seq_printf(seq, "polling frequency: %d seconds\n",
- (tz->thermal_zone->polling_delay / 1000));
-
- end:
- return 0;
-}
-
-static int acpi_thermal_polling_open_fs(struct inode *inode, struct file *file)
-{
- return single_open(file, acpi_thermal_polling_seq_show,
- PDE(inode)->data);
-}
-
-static int acpi_thermal_set_polling(struct acpi_thermal *tz, int seconds)
-{
- if (!tz)
- return -EINVAL;
-
- /* Convert value to deci-seconds */
- tz->polling_frequency = seconds * 10;
-
- tz->thermal_zone->polling_delay = seconds * 1000;
-
- if (tz->tz_enabled)
- thermal_zone_device_update(tz->thermal_zone);
-
- ACPI_DEBUG_PRINT((ACPI_DB_INFO,
- "Polling frequency set to %lu seconds\n",
- tz->polling_frequency/10));
-
- return 0;
-}
-
-static ssize_t
-acpi_thermal_write_polling(struct file *file,
- const char __user * buffer,
- size_t count, loff_t * ppos)
-{
- struct seq_file *m = file->private_data;
- struct acpi_thermal *tz = m->private;
- int result = 0;
- char polling_string[12] = { '\0' };
- int seconds = 0;
-
-
- if (!tz || (count > sizeof(polling_string) - 1))
- return -EINVAL;
-
- if (copy_from_user(polling_string, buffer, count))
- return -EFAULT;
-
- polling_string[count] = '\0';
-
- seconds = simple_strtoul(polling_string, NULL, 0);
-
- result = acpi_thermal_set_polling(tz, seconds);
- if (result)
- return result;
-
- acpi_thermal_check(tz);
-
- return count;
-}
-
-static int acpi_thermal_add_fs(struct acpi_device *device)
-{
- struct proc_dir_entry *entry = NULL;
-
-
- if (!acpi_device_dir(device)) {
- acpi_device_dir(device) = proc_mkdir(acpi_device_bid(device),
- acpi_thermal_dir);
- if (!acpi_device_dir(device))
- return -ENODEV;
- }
-
- /* 'state' [R] */
- entry = proc_create_data(ACPI_THERMAL_FILE_STATE,
- S_IRUGO, acpi_device_dir(device),
- &acpi_thermal_state_fops,
- acpi_driver_data(device));
- if (!entry)
- return -ENODEV;
-
- /* 'temperature' [R] */
- entry = proc_create_data(ACPI_THERMAL_FILE_TEMPERATURE,
- S_IRUGO, acpi_device_dir(device),
- &acpi_thermal_temp_fops,
- acpi_driver_data(device));
- if (!entry)
- return -ENODEV;
-
- /* 'trip_points' [R] */
- entry = proc_create_data(ACPI_THERMAL_FILE_TRIP_POINTS,
- S_IRUGO,
- acpi_device_dir(device),
- &acpi_thermal_trip_fops,
- acpi_driver_data(device));
- if (!entry)
- return -ENODEV;
-
- /* 'cooling_mode' [R/W] */
- entry = proc_create_data(ACPI_THERMAL_FILE_COOLING_MODE,
- S_IFREG | S_IRUGO | S_IWUSR,
- acpi_device_dir(device),
- &acpi_thermal_cooling_fops,
- acpi_driver_data(device));
- if (!entry)
- return -ENODEV;
-
- /* 'polling_frequency' [R/W] */
- entry = proc_create_data(ACPI_THERMAL_FILE_POLLING_FREQ,
- S_IFREG | S_IRUGO | S_IWUSR,
- acpi_device_dir(device),
- &acpi_thermal_polling_fops,
- acpi_driver_data(device));
- if (!entry)
- return -ENODEV;
- return 0;
-}
-
-static int acpi_thermal_remove_fs(struct acpi_device *device)
-{
-
- if (acpi_device_dir(device)) {
- remove_proc_entry(ACPI_THERMAL_FILE_POLLING_FREQ,
- acpi_device_dir(device));
- remove_proc_entry(ACPI_THERMAL_FILE_COOLING_MODE,
- acpi_device_dir(device));
- remove_proc_entry(ACPI_THERMAL_FILE_TRIP_POINTS,
- acpi_device_dir(device));
- remove_proc_entry(ACPI_THERMAL_FILE_TEMPERATURE,
- acpi_device_dir(device));
- remove_proc_entry(ACPI_THERMAL_FILE_STATE,
- acpi_device_dir(device));
- remove_proc_entry(acpi_device_bid(device), acpi_thermal_dir);
- acpi_device_dir(device) = NULL;
- }
-
- return 0;
-}
-#else
-static inline int acpi_thermal_add_fs(struct acpi_device *device) { return 0; }
-static inline int acpi_thermal_remove_fs(struct acpi_device *device)
-{
- return 0;
-}
-#endif /* CONFIG_ACPI_PROCFS */
/* --------------------------------------------------------------------------
Driver Interface
-------------------------------------------------------------------------- */
if (result)
goto free_memory;
- result = acpi_thermal_add_fs(device);
- if (result)
- goto unregister_thermal_zone;
-
printk(KERN_INFO PREFIX "%s [%s] (%ld C)\n",
acpi_device_name(device), acpi_device_bid(device),
KELVIN_TO_CELSIUS(tz->temperature));
goto end;
-unregister_thermal_zone:
- thermal_zone_device_unregister(tz->thermal_zone);
free_memory:
kfree(tz);
end:
tz = acpi_driver_data(device);
- acpi_thermal_remove_fs(device);
acpi_thermal_unregister_thermal_zone(tz);
mutex_destroy(&tz->lock);
kfree(tz);
return -ENODEV;
}
-#ifdef CONFIG_ACPI_PROCFS
- acpi_thermal_dir = proc_mkdir(ACPI_THERMAL_CLASS, acpi_root_dir);
- if (!acpi_thermal_dir)
- return -ENODEV;
-#endif
-
result = acpi_bus_register_driver(&acpi_thermal_driver);
- if (result < 0) {
-#ifdef CONFIG_ACPI_PROCFS
- remove_proc_entry(ACPI_THERMAL_CLASS, acpi_root_dir);
-#endif
+ if (result < 0)
return -ENODEV;
- }
return 0;
}
acpi_bus_unregister_driver(&acpi_thermal_driver);
-#ifdef CONFIG_ACPI_PROCFS
- remove_proc_entry(ACPI_THERMAL_CLASS, acpi_root_dir);
-#endif
-
return;
}
#include <linux/types.h>
#include <linux/list.h>
#include <linux/mutex.h>
-#include <linux/proc_fs.h>
-#include <linux/seq_file.h>
#include <linux/input.h>
#include <linux/backlight.h>
#include <linux/thermal.h>
struct acpi_video_bus_flags flags;
struct list_head video_device_list;
struct mutex device_list_lock; /* protects video_device_list */
-#ifdef CONFIG_ACPI_PROCFS
- struct proc_dir_entry *dir;
-#endif
struct input_dev *input;
char phys[32]; /* for input device */
struct notifier_block pm_nb;
struct output_device *output_dev;
};
-#ifdef CONFIG_ACPI_PROCFS
-/* bus */
-static int acpi_video_bus_info_open_fs(struct inode *inode, struct file *file);
-static const struct file_operations acpi_video_bus_info_fops = {
- .owner = THIS_MODULE,
- .open = acpi_video_bus_info_open_fs,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = single_release,
-};
-
-static int acpi_video_bus_ROM_open_fs(struct inode *inode, struct file *file);
-static const struct file_operations acpi_video_bus_ROM_fops = {
- .owner = THIS_MODULE,
- .open = acpi_video_bus_ROM_open_fs,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = single_release,
-};
-
-static int acpi_video_bus_POST_info_open_fs(struct inode *inode,
- struct file *file);
-static const struct file_operations acpi_video_bus_POST_info_fops = {
- .owner = THIS_MODULE,
- .open = acpi_video_bus_POST_info_open_fs,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = single_release,
-};
-
-static int acpi_video_bus_POST_open_fs(struct inode *inode, struct file *file);
-static ssize_t acpi_video_bus_write_POST(struct file *file,
- const char __user *buffer, size_t count, loff_t *data);
-static const struct file_operations acpi_video_bus_POST_fops = {
- .owner = THIS_MODULE,
- .open = acpi_video_bus_POST_open_fs,
- .read = seq_read,
- .write = acpi_video_bus_write_POST,
- .llseek = seq_lseek,
- .release = single_release,
-};
-
-static int acpi_video_bus_DOS_open_fs(struct inode *inode, struct file *file);
-static ssize_t acpi_video_bus_write_DOS(struct file *file,
- const char __user *buffer, size_t count, loff_t *data);
-static const struct file_operations acpi_video_bus_DOS_fops = {
- .owner = THIS_MODULE,
- .open = acpi_video_bus_DOS_open_fs,
- .read = seq_read,
- .write = acpi_video_bus_write_DOS,
- .llseek = seq_lseek,
- .release = single_release,
-};
-
-/* device */
-static int acpi_video_device_info_open_fs(struct inode *inode,
- struct file *file);
-static const struct file_operations acpi_video_device_info_fops = {
- .owner = THIS_MODULE,
- .open = acpi_video_device_info_open_fs,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = single_release,
-};
-
-static int acpi_video_device_state_open_fs(struct inode *inode,
- struct file *file);
-static ssize_t acpi_video_device_write_state(struct file *file,
- const char __user *buffer, size_t count, loff_t *data);
-static const struct file_operations acpi_video_device_state_fops = {
- .owner = THIS_MODULE,
- .open = acpi_video_device_state_open_fs,
- .read = seq_read,
- .write = acpi_video_device_write_state,
- .llseek = seq_lseek,
- .release = single_release,
-};
-
-static int acpi_video_device_brightness_open_fs(struct inode *inode,
- struct file *file);
-static ssize_t acpi_video_device_write_brightness(struct file *file,
- const char __user *buffer, size_t count, loff_t *data);
-static const struct file_operations acpi_video_device_brightness_fops = {
- .owner = THIS_MODULE,
- .open = acpi_video_device_brightness_open_fs,
- .read = seq_read,
- .write = acpi_video_device_write_brightness,
- .llseek = seq_lseek,
- .release = single_release,
-};
-
-static int acpi_video_device_EDID_open_fs(struct inode *inode,
- struct file *file);
-static const struct file_operations acpi_video_device_EDID_fops = {
- .owner = THIS_MODULE,
- .open = acpi_video_device_EDID_open_fs,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = single_release,
-};
-#endif /* CONFIG_ACPI_PROCFS */
-
static const char device_decode[][30] = {
"motherboard VGA device",
"PCI VGA device",
return status;
}
-/* --------------------------------------------------------------------------
- FS Interface (/proc)
- -------------------------------------------------------------------------- */
-#ifdef CONFIG_ACPI_PROCFS
-
-static struct proc_dir_entry *acpi_video_dir;
-
-/* video devices */
-
-static int acpi_video_device_info_seq_show(struct seq_file *seq, void *offset)
-{
- struct acpi_video_device *dev = seq->private;
-
-
- if (!dev)
- goto end;
-
- seq_printf(seq, "device_id: 0x%04x\n", (u32) dev->device_id);
- seq_printf(seq, "type: ");
- if (dev->flags.crt)
- seq_printf(seq, "CRT\n");
- else if (dev->flags.lcd)
- seq_printf(seq, "LCD\n");
- else if (dev->flags.tvout)
- seq_printf(seq, "TVOUT\n");
- else if (dev->flags.dvi)
- seq_printf(seq, "DVI\n");
- else
- seq_printf(seq, "UNKNOWN\n");
-
- seq_printf(seq, "known by bios: %s\n", dev->flags.bios ? "yes" : "no");
-
- end:
- return 0;
-}
-
-static int
-acpi_video_device_info_open_fs(struct inode *inode, struct file *file)
-{
- return single_open(file, acpi_video_device_info_seq_show,
- PDE(inode)->data);
-}
-
-static int
-acpi_video_device_query(struct acpi_video_device *device,
- unsigned long long *state)
-{
- int status;
-
- status = acpi_evaluate_integer(device->dev->handle, "_DGS",
- NULL, state);
-
- return status;
-}
-
-static int acpi_video_device_state_seq_show(struct seq_file *seq, void *offset)
-{
- int status;
- struct acpi_video_device *dev = seq->private;
- unsigned long long state;
-
-
- if (!dev)
- goto end;
-
- status = acpi_video_device_get_state(dev, &state);
- seq_printf(seq, "state: ");
- if (ACPI_SUCCESS(status))
- seq_printf(seq, "0x%02llx\n", state);
- else
- seq_printf(seq, "<not supported>\n");
-
- status = acpi_video_device_query(dev, &state);
- seq_printf(seq, "query: ");
- if (ACPI_SUCCESS(status))
- seq_printf(seq, "0x%02llx\n", state);
- else
- seq_printf(seq, "<not supported>\n");
-
- end:
- return 0;
-}
-
-static int
-acpi_video_device_state_open_fs(struct inode *inode, struct file *file)
-{
- return single_open(file, acpi_video_device_state_seq_show,
- PDE(inode)->data);
-}
-
-static ssize_t
-acpi_video_device_write_state(struct file *file,
- const char __user * buffer,
- size_t count, loff_t * data)
-{
- int status;
- struct seq_file *m = file->private_data;
- struct acpi_video_device *dev = m->private;
- char str[12] = { 0 };
- u32 state = 0;
-
-
- if (!dev || count >= sizeof(str))
- return -EINVAL;
-
- if (copy_from_user(str, buffer, count))
- return -EFAULT;
-
- str[count] = 0;
- state = simple_strtoul(str, NULL, 0);
- state &= ((1ul << 31) | (1ul << 30) | (1ul << 0));
-
- status = acpi_video_device_set_state(dev, state);
-
- if (status)
- return -EFAULT;
-
- return count;
-}
-
-static int
-acpi_video_device_brightness_seq_show(struct seq_file *seq, void *offset)
-{
- struct acpi_video_device *dev = seq->private;
- int i;
-
-
- if (!dev || !dev->brightness) {
- seq_printf(seq, "<not supported>\n");
- return 0;
- }
-
- seq_printf(seq, "levels: ");
- for (i = 2; i < dev->brightness->count; i++)
- seq_printf(seq, " %d", dev->brightness->levels[i]);
- seq_printf(seq, "\ncurrent: %d\n", dev->brightness->curr);
-
- return 0;
-}
-
-static int
-acpi_video_device_brightness_open_fs(struct inode *inode, struct file *file)
-{
- return single_open(file, acpi_video_device_brightness_seq_show,
- PDE(inode)->data);
-}
-
-static ssize_t
-acpi_video_device_write_brightness(struct file *file,
- const char __user * buffer,
- size_t count, loff_t * data)
-{
- struct seq_file *m = file->private_data;
- struct acpi_video_device *dev = m->private;
- char str[5] = { 0 };
- unsigned int level = 0;
- int i;
-
-
- if (!dev || !dev->brightness || count >= sizeof(str))
- return -EINVAL;
-
- if (copy_from_user(str, buffer, count))
- return -EFAULT;
-
- str[count] = 0;
- level = simple_strtoul(str, NULL, 0);
-
- if (level > 100)
- return -EFAULT;
-
- /* validate through the list of available levels */
- for (i = 2; i < dev->brightness->count; i++)
- if (level == dev->brightness->levels[i]) {
- if (!acpi_video_device_lcd_set_level(dev, level))
- return count;
- break;
- }
-
- return -EINVAL;
-}
-
-static int acpi_video_device_EDID_seq_show(struct seq_file *seq, void *offset)
-{
- struct acpi_video_device *dev = seq->private;
- int status;
- int i;
- union acpi_object *edid = NULL;
-
-
- if (!dev)
- goto out;
-
- status = acpi_video_device_EDID(dev, &edid, 128);
- if (ACPI_FAILURE(status)) {
- status = acpi_video_device_EDID(dev, &edid, 256);
- }
-
- if (ACPI_FAILURE(status)) {
- goto out;
- }
-
- if (edid && edid->type == ACPI_TYPE_BUFFER) {
- for (i = 0; i < edid->buffer.length; i++)
- seq_putc(seq, edid->buffer.pointer[i]);
- }
-
- out:
- if (!edid)
- seq_printf(seq, "<not supported>\n");
- else
- kfree(edid);
-
- return 0;
-}
-
-static int
-acpi_video_device_EDID_open_fs(struct inode *inode, struct file *file)
-{
- return single_open(file, acpi_video_device_EDID_seq_show,
- PDE(inode)->data);
-}
-
-static int acpi_video_device_add_fs(struct acpi_device *device)
-{
- struct proc_dir_entry *entry, *device_dir;
- struct acpi_video_device *vid_dev;
-
- vid_dev = acpi_driver_data(device);
- if (!vid_dev)
- return -ENODEV;
-
- device_dir = proc_mkdir(acpi_device_bid(device),
- vid_dev->video->dir);
- if (!device_dir)
- return -ENOMEM;
-
- /* 'info' [R] */
- entry = proc_create_data("info", S_IRUGO, device_dir,
- &acpi_video_device_info_fops, acpi_driver_data(device));
- if (!entry)
- goto err_remove_dir;
-
- /* 'state' [R/W] */
- entry = proc_create_data("state", S_IFREG | S_IRUGO | S_IWUSR,
- device_dir,
- &acpi_video_device_state_fops,
- acpi_driver_data(device));
- if (!entry)
- goto err_remove_info;
-
- /* 'brightness' [R/W] */
- entry = proc_create_data("brightness", S_IFREG | S_IRUGO | S_IWUSR,
- device_dir,
- &acpi_video_device_brightness_fops,
- acpi_driver_data(device));
- if (!entry)
- goto err_remove_state;
-
- /* 'EDID' [R] */
- entry = proc_create_data("EDID", S_IRUGO, device_dir,
- &acpi_video_device_EDID_fops,
- acpi_driver_data(device));
- if (!entry)
- goto err_remove_brightness;
-
- acpi_device_dir(device) = device_dir;
-
- return 0;
-
- err_remove_brightness:
- remove_proc_entry("brightness", device_dir);
- err_remove_state:
- remove_proc_entry("state", device_dir);
- err_remove_info:
- remove_proc_entry("info", device_dir);
- err_remove_dir:
- remove_proc_entry(acpi_device_bid(device), vid_dev->video->dir);
- return -ENOMEM;
-}
-
-static int acpi_video_device_remove_fs(struct acpi_device *device)
-{
- struct acpi_video_device *vid_dev;
- struct proc_dir_entry *device_dir;
-
- vid_dev = acpi_driver_data(device);
- if (!vid_dev || !vid_dev->video || !vid_dev->video->dir)
- return -ENODEV;
-
- device_dir = acpi_device_dir(device);
- if (device_dir) {
- remove_proc_entry("info", device_dir);
- remove_proc_entry("state", device_dir);
- remove_proc_entry("brightness", device_dir);
- remove_proc_entry("EDID", device_dir);
- remove_proc_entry(acpi_device_bid(device), vid_dev->video->dir);
- acpi_device_dir(device) = NULL;
- }
-
- return 0;
-}
-
-/* video bus */
-static int acpi_video_bus_info_seq_show(struct seq_file *seq, void *offset)
-{
- struct acpi_video_bus *video = seq->private;
-
-
- if (!video)
- goto end;
-
- seq_printf(seq, "Switching heads: %s\n",
- video->flags.multihead ? "yes" : "no");
- seq_printf(seq, "Video ROM: %s\n",
- video->flags.rom ? "yes" : "no");
- seq_printf(seq, "Device to be POSTed on boot: %s\n",
- video->flags.post ? "yes" : "no");
-
- end:
- return 0;
-}
-
-static int acpi_video_bus_info_open_fs(struct inode *inode, struct file *file)
-{
- return single_open(file, acpi_video_bus_info_seq_show,
- PDE(inode)->data);
-}
-
-static int acpi_video_bus_ROM_seq_show(struct seq_file *seq, void *offset)
-{
- struct acpi_video_bus *video = seq->private;
-
-
- if (!video)
- goto end;
-
- printk(KERN_INFO PREFIX "Please implement %s\n", __func__);
- seq_printf(seq, "<TODO>\n");
-
- end:
- return 0;
-}
-
-static int acpi_video_bus_ROM_open_fs(struct inode *inode, struct file *file)
-{
- return single_open(file, acpi_video_bus_ROM_seq_show, PDE(inode)->data);
-}
-
-static int
-acpi_video_bus_POST_options(struct acpi_video_bus *video,
- unsigned long long *options)
-{
- int status;
-
- status = acpi_evaluate_integer(video->device->handle, "_VPO",
- NULL, options);
- *options &= 3;
-
- return status;
-}
-
-static int acpi_video_bus_POST_info_seq_show(struct seq_file *seq, void *offset)
-{
- struct acpi_video_bus *video = seq->private;
- unsigned long long options;
- int status;
-
-
- if (!video)
- goto end;
-
- status = acpi_video_bus_POST_options(video, &options);
- if (ACPI_SUCCESS(status)) {
- if (!(options & 1)) {
- printk(KERN_WARNING PREFIX
- "The motherboard VGA device is not listed as a possible POST device.\n");
- printk(KERN_WARNING PREFIX
- "This indicates a BIOS bug. Please contact the manufacturer.\n");
- }
- printk(KERN_WARNING "%llx\n", options);
- seq_printf(seq, "can POST: <integrated video>");
- if (options & 2)
- seq_printf(seq, " <PCI video>");
- if (options & 4)
- seq_printf(seq, " <AGP video>");
- seq_putc(seq, '\n');
- } else
- seq_printf(seq, "<not supported>\n");
- end:
- return 0;
-}
-
-static int
-acpi_video_bus_POST_info_open_fs(struct inode *inode, struct file *file)
-{
- return single_open(file, acpi_video_bus_POST_info_seq_show,
- PDE(inode)->data);
-}
-
-static int
-acpi_video_bus_get_POST(struct acpi_video_bus *video, unsigned long long *id)
-{
- int status;
-
- status = acpi_evaluate_integer(video->device->handle, "_GPD", NULL, id);
-
- return status;
-}
-
-static int acpi_video_bus_POST_seq_show(struct seq_file *seq, void *offset)
-{
- struct acpi_video_bus *video = seq->private;
- int status;
- unsigned long long id;
-
-
- if (!video)
- goto end;
-
- status = acpi_video_bus_get_POST(video, &id);
- if (!ACPI_SUCCESS(status)) {
- seq_printf(seq, "<not supported>\n");
- goto end;
- }
- seq_printf(seq, "device POSTed is <%s>\n", device_decode[id & 3]);
-
- end:
- return 0;
-}
-
-static int acpi_video_bus_DOS_seq_show(struct seq_file *seq, void *offset)
-{
- struct acpi_video_bus *video = seq->private;
-
-
- seq_printf(seq, "DOS setting: <%d>\n", video->dos_setting);
-
- return 0;
-}
-
-static int acpi_video_bus_POST_open_fs(struct inode *inode, struct file *file)
-{
- return single_open(file, acpi_video_bus_POST_seq_show,
- PDE(inode)->data);
-}
-
-static int acpi_video_bus_DOS_open_fs(struct inode *inode, struct file *file)
-{
- return single_open(file, acpi_video_bus_DOS_seq_show, PDE(inode)->data);
-}
-
-static int
-acpi_video_bus_set_POST(struct acpi_video_bus *video, unsigned long option)
-{
- int status;
- unsigned long long tmp;
- union acpi_object arg0 = { ACPI_TYPE_INTEGER };
- struct acpi_object_list args = { 1, &arg0 };
-
-
- arg0.integer.value = option;
-
- status = acpi_evaluate_integer(video->device->handle, "_SPD",
- &args, &tmp);
- if (ACPI_SUCCESS(status))
- status = tmp ? (-EINVAL) : (AE_OK);
-
- return status;
-}
-
-static ssize_t
-acpi_video_bus_write_POST(struct file *file,
- const char __user * buffer,
- size_t count, loff_t * data)
-{
- int status;
- struct seq_file *m = file->private_data;
- struct acpi_video_bus *video = m->private;
- char str[12] = { 0 };
- unsigned long long opt, options;
-
-
- if (!video || count >= sizeof(str))
- return -EINVAL;
-
- status = acpi_video_bus_POST_options(video, &options);
- if (!ACPI_SUCCESS(status))
- return -EINVAL;
-
- if (copy_from_user(str, buffer, count))
- return -EFAULT;
-
- str[count] = 0;
- opt = strtoul(str, NULL, 0);
- if (opt > 3)
- return -EFAULT;
-
- /* just in case an OEM 'forgot' the motherboard... */
- options |= 1;
-
- if (options & (1ul << opt)) {
- status = acpi_video_bus_set_POST(video, opt);
- if (!ACPI_SUCCESS(status))
- return -EFAULT;
-
- }
-
- return count;
-}
-
-static ssize_t
-acpi_video_bus_write_DOS(struct file *file,
- const char __user * buffer,
- size_t count, loff_t * data)
-{
- int status;
- struct seq_file *m = file->private_data;
- struct acpi_video_bus *video = m->private;
- char str[12] = { 0 };
- unsigned long opt;
-
-
- if (!video || count >= sizeof(str))
- return -EINVAL;
-
- if (copy_from_user(str, buffer, count))
- return -EFAULT;
-
- str[count] = 0;
- opt = strtoul(str, NULL, 0);
- if (opt > 7)
- return -EFAULT;
-
- status = acpi_video_bus_DOS(video, opt & 0x3, (opt & 0x4) >> 2);
-
- if (!ACPI_SUCCESS(status))
- return -EFAULT;
-
- return count;
-}
-
-static int acpi_video_bus_add_fs(struct acpi_device *device)
-{
- struct acpi_video_bus *video = acpi_driver_data(device);
- struct proc_dir_entry *device_dir;
- struct proc_dir_entry *entry;
-
- device_dir = proc_mkdir(acpi_device_bid(device), acpi_video_dir);
- if (!device_dir)
- return -ENOMEM;
-
- /* 'info' [R] */
- entry = proc_create_data("info", S_IRUGO, device_dir,
- &acpi_video_bus_info_fops,
- acpi_driver_data(device));
- if (!entry)
- goto err_remove_dir;
-
- /* 'ROM' [R] */
- entry = proc_create_data("ROM", S_IRUGO, device_dir,
- &acpi_video_bus_ROM_fops,
- acpi_driver_data(device));
- if (!entry)
- goto err_remove_info;
-
- /* 'POST_info' [R] */
- entry = proc_create_data("POST_info", S_IRUGO, device_dir,
- &acpi_video_bus_POST_info_fops,
- acpi_driver_data(device));
- if (!entry)
- goto err_remove_rom;
-
- /* 'POST' [R/W] */
- entry = proc_create_data("POST", S_IFREG | S_IRUGO | S_IWUSR,
- device_dir,
- &acpi_video_bus_POST_fops,
- acpi_driver_data(device));
- if (!entry)
- goto err_remove_post_info;
-
- /* 'DOS' [R/W] */
- entry = proc_create_data("DOS", S_IFREG | S_IRUGO | S_IWUSR,
- device_dir,
- &acpi_video_bus_DOS_fops,
- acpi_driver_data(device));
- if (!entry)
- goto err_remove_post;
-
- video->dir = acpi_device_dir(device) = device_dir;
- return 0;
-
- err_remove_post:
- remove_proc_entry("POST", device_dir);
- err_remove_post_info:
- remove_proc_entry("POST_info", device_dir);
- err_remove_rom:
- remove_proc_entry("ROM", device_dir);
- err_remove_info:
- remove_proc_entry("info", device_dir);
- err_remove_dir:
- remove_proc_entry(acpi_device_bid(device), acpi_video_dir);
- return -ENOMEM;
-}
-
-static int acpi_video_bus_remove_fs(struct acpi_device *device)
-{
- struct proc_dir_entry *device_dir = acpi_device_dir(device);
-
- if (device_dir) {
- remove_proc_entry("info", device_dir);
- remove_proc_entry("ROM", device_dir);
- remove_proc_entry("POST_info", device_dir);
- remove_proc_entry("POST", device_dir);
- remove_proc_entry("DOS", device_dir);
- remove_proc_entry(acpi_device_bid(device), acpi_video_dir);
- acpi_device_dir(device) = NULL;
- }
-
- return 0;
-}
-#else
-static inline int acpi_video_device_add_fs(struct acpi_device *device)
-{
- return 0;
-}
-static inline int acpi_video_device_remove_fs(struct acpi_device *device)
-{
- return 0;
-}
-static inline int acpi_video_bus_add_fs(struct acpi_device *device)
-{
- return 0;
-}
-static inline int acpi_video_bus_remove_fs(struct acpi_device *device)
-{
- return 0;
-}
-#endif /* CONFIG_ACPI_PROCFS */
-
/* --------------------------------------------------------------------------
Driver Interface
-------------------------------------------------------------------------- */
list_add_tail(&data->entry, &video->video_device_list);
mutex_unlock(&video->device_list_lock);
- acpi_video_device_add_fs(device);
-
return 0;
}
if (!device || !device->video)
return -ENOENT;
- acpi_video_device_remove_fs(device->dev);
-
status = acpi_remove_notify_handler(device->dev->handle,
ACPI_DEVICE_NOTIFY,
acpi_video_device_notify);
if (error)
goto err_free_video;
- error = acpi_video_bus_add_fs(device);
- if (error)
- goto err_free_video;
-
mutex_init(&video->device_list_lock);
INIT_LIST_HEAD(&video->video_device_list);
acpi_video_bus_stop_devices(video);
acpi_video_bus_put_devices(video);
kfree(video->attached_array);
- acpi_video_bus_remove_fs(device);
err_free_video:
kfree(video);
device->driver_data = NULL;
acpi_video_bus_stop_devices(video);
acpi_video_bus_put_devices(video);
- acpi_video_bus_remove_fs(device);
input_unregister_device(video->input);
kfree(video->attached_array);
return 0;
}
-#ifdef CONFIG_ACPI_PROCFS
- acpi_video_dir = proc_mkdir(ACPI_VIDEO_CLASS, acpi_root_dir);
- if (!acpi_video_dir)
- return -ENODEV;
-#endif
-
result = acpi_bus_register_driver(&acpi_video_bus);
- if (result < 0) {
- remove_proc_entry(ACPI_VIDEO_CLASS, acpi_root_dir);
+ if (result < 0)
return -ENODEV;
- }
/*
* When the acpi_video_bus is loaded successfully, increase
}
acpi_bus_unregister_driver(&acpi_video_bus);
-#ifdef CONFIG_ACPI_PROCFS
- remove_proc_entry(ACPI_VIDEO_CLASS, acpi_root_dir);
-#endif
-
register_count = 0;
return;
"support\n"));
*cap |= ACPI_VIDEO_BACKLIGHT;
if (ACPI_FAILURE(acpi_get_handle(handle, "_BQC", &h_dummy)))
- printk(KERN_WARNING FW_BUG PREFIX "ACPI brightness "
- "control misses _BQC function\n");
+ printk(KERN_WARNING FW_BUG PREFIX "No _BQC method, "
+ "cannot determine initial brightness\n");
/* We have backlight support, no need to scan further */
return AE_CTRL_TERMINATE;
}
static int ahci_pci_device_resume(struct pci_dev *pdev);
#endif
+static struct scsi_host_template ahci_sht = {
+ AHCI_SHT("ahci"),
+};
+
static struct ata_port_operations ahci_vt8251_ops = {
.inherits = &ahci_ops,
.hardreset = ahci_vt8251_hardreset,
extern int ahci_ignore_sss;
-extern struct scsi_host_template ahci_sht;
+extern struct device_attribute *ahci_shost_attrs[];
+extern struct device_attribute *ahci_sdev_attrs[];
+
+#define AHCI_SHT(drv_name) \
+ ATA_NCQ_SHT(drv_name), \
+ .can_queue = AHCI_MAX_CMDS - 1, \
+ .sg_tablesize = AHCI_MAX_SG, \
+ .dma_boundary = AHCI_DMA_BOUNDARY, \
+ .shost_attrs = ahci_shost_attrs, \
+ .sdev_attrs = ahci_sdev_attrs
+
extern struct ata_port_operations ahci_ops;
void ahci_save_initial_config(struct device *dev,
#include <linux/ahci_platform.h>
#include "ahci.h"
+static struct scsi_host_template ahci_platform_sht = {
+ AHCI_SHT("ahci_platform"),
+};
+
static int __init ahci_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
ahci_print_info(host, "platform");
rc = ata_host_activate(host, irq, ahci_interrupt, IRQF_SHARED,
- &ahci_sht);
+ &ahci_platform_sht);
if (rc)
goto err0;
static DEVICE_ATTR(em_buffer, S_IWUSR | S_IRUGO,
ahci_read_em_buffer, ahci_store_em_buffer);
-static struct device_attribute *ahci_shost_attrs[] = {
+struct device_attribute *ahci_shost_attrs[] = {
&dev_attr_link_power_management_policy,
&dev_attr_em_message_type,
&dev_attr_em_message,
&dev_attr_em_buffer,
NULL
};
+EXPORT_SYMBOL_GPL(ahci_shost_attrs);
-static struct device_attribute *ahci_sdev_attrs[] = {
+struct device_attribute *ahci_sdev_attrs[] = {
&dev_attr_sw_activity,
&dev_attr_unload_heads,
NULL
};
-
-struct scsi_host_template ahci_sht = {
- ATA_NCQ_SHT("ahci"),
- .can_queue = AHCI_MAX_CMDS - 1,
- .sg_tablesize = AHCI_MAX_SG,
- .dma_boundary = AHCI_DMA_BOUNDARY,
- .shost_attrs = ahci_shost_attrs,
- .sdev_attrs = ahci_sdev_attrs,
-};
-EXPORT_SYMBOL_GPL(ahci_sht);
+EXPORT_SYMBOL_GPL(ahci_sdev_attrs);
struct ata_port_operations ahci_ops = {
.inherits = &sata_pmp_port_ops,
{
struct atm_dev *dev;
IADEV *iadev;
- unsigned long flags;
int ret;
iadev = kzalloc(sizeof(*iadev), GFP_KERNEL);
ia_dev[iadev_count] = iadev;
_ia_dev[iadev_count] = dev;
iadev_count++;
- spin_lock_init(&iadev->misc_lock);
- /* First fixes first. I don't want to think about this now. */
- spin_lock_irqsave(&iadev->misc_lock, flags);
if (ia_init(dev) || ia_start(dev)) {
IF_INIT(printk("IA register failed!\n");)
iadev_count--;
ia_dev[iadev_count] = NULL;
_ia_dev[iadev_count] = NULL;
- spin_unlock_irqrestore(&iadev->misc_lock, flags);
ret = -EINVAL;
goto err_out_deregister_dev;
}
- spin_unlock_irqrestore(&iadev->misc_lock, flags);
IF_EVENT(printk("iadev_count = %d\n", iadev_count);)
iadev->next_board = ia_boards;
struct dle_q rx_dle_q;
struct free_desc_q *rx_free_desc_qhead;
struct sk_buff_head rx_dma_q;
- spinlock_t rx_lock, misc_lock;
+ spinlock_t rx_lock;
struct atm_vcc **rx_open; /* list of all open VCs */
u16 num_rx_desc, rx_buf_sz, rxing;
u32 rx_pkt_ram, rx_tmp_cnt;
struct atm_dev *atmdev = container_of(dev, struct atm_dev, class_dev);
struct solos_card *card = atmdev->dev_data;
struct sk_buff *skb;
+ unsigned int len;
spin_lock(&card->cli_queue_lock);
skb = skb_dequeue(&card->cli_queue[SOLOS_CHAN(atmdev)]);
if(skb == NULL)
return sprintf(buf, "No data.\n");
- memcpy(buf, skb->data, skb->len);
- dev_dbg(&card->dev->dev, "len: %d\n", skb->len);
+ len = skb->len;
+ memcpy(buf, skb->data, len);
+ dev_dbg(&card->dev->dev, "len: %d\n", len);
kfree_skb(skb);
- return skb->len;
+ return len;
}
static int send_command(struct solos_card *card, int dev, const char *buf, size_t size)
clean4:
kfree(h->cmd_pool_bits);
/* Free up sg elements */
- for (k = 0; k < h->nr_cmds; k++)
+ for (k-- ; k >= 0; k--)
kfree(h->scatter_list[k]);
kfree(h->scatter_list);
cciss_free_sg_chain_blocks(h->cmd_sg_list, h->nr_cmds);
pkt_shrink_pktlist(pd);
}
-static struct pktcdvd_device *pkt_find_dev_from_minor(int dev_minor)
+static struct pktcdvd_device *pkt_find_dev_from_minor(unsigned int dev_minor)
{
if (dev_minor >= MAX_WRITERS)
return NULL;
memcpy(buf, dev->bounce_buf+offset, size);
offset += size;
flush_kernel_dcache_page(bvec->bv_page);
- bvec_kunmap_irq(bvec, &flags);
+ bvec_kunmap_irq(buf, &flags);
i++;
}
}
struct virtio_blk *vblk = disk->private_data;
struct request *req;
struct bio *bio;
+ int err;
bio = bio_map_kern(vblk->disk->queue, id_str, VIRTIO_BLK_ID_BYTES,
GFP_KERNEL);
}
req->cmd_type = REQ_TYPE_SPECIAL;
- return blk_execute_rq(vblk->disk->queue, vblk->disk, req, false);
+ err = blk_execute_rq(vblk->disk->queue, vblk->disk, req, false);
+ blk_put_request(req);
+
+ return err;
}
static int virtblk_locked_ioctl(struct block_device *bdev, fmode_t mode,
"G45/G43", NULL, &intel_i965_driver },
{ PCI_DEVICE_ID_INTEL_B43_HB, PCI_DEVICE_ID_INTEL_B43_IG,
"B43", NULL, &intel_i965_driver },
+ { PCI_DEVICE_ID_INTEL_B43_1_HB, PCI_DEVICE_ID_INTEL_B43_1_IG,
+ "B43", NULL, &intel_i965_driver },
{ PCI_DEVICE_ID_INTEL_G41_HB, PCI_DEVICE_ID_INTEL_G41_IG,
"G41", NULL, &intel_i965_driver },
{ PCI_DEVICE_ID_INTEL_IRONLAKE_D_HB, PCI_DEVICE_ID_INTEL_IRONLAKE_D_IG,
#define PCI_DEVICE_ID_INTEL_Q33_IG 0x29D2
#define PCI_DEVICE_ID_INTEL_B43_HB 0x2E40
#define PCI_DEVICE_ID_INTEL_B43_IG 0x2E42
+#define PCI_DEVICE_ID_INTEL_B43_1_HB 0x2E90
+#define PCI_DEVICE_ID_INTEL_B43_1_IG 0x2E92
#define PCI_DEVICE_ID_INTEL_GM45_HB 0x2A40
#define PCI_DEVICE_ID_INTEL_GM45_IG 0x2A42
#define PCI_DEVICE_ID_INTEL_EAGLELAKE_HB 0x2E00
#ifdef CONFIG_PCI
static int pci_registered;
#endif
+#ifdef CONFIG_ACPI
+static int pnp_registered;
+#endif
#ifdef CONFIG_PPC_OF
static int of_registered;
#endif
{
struct acpi_device *acpi_dev;
struct smi_info *info;
- struct resource *res;
+ struct resource *res, *res_second;
acpi_handle handle;
acpi_status status;
unsigned long long tmp;
info->io.addr_data = res->start;
info->io.regspacing = DEFAULT_REGSPACING;
- res = pnp_get_resource(dev,
+ res_second = pnp_get_resource(dev,
(info->io.addr_type == IPMI_IO_ADDR_SPACE) ?
IORESOURCE_IO : IORESOURCE_MEM,
1);
- if (res) {
- if (res->start > info->io.addr_data)
- info->io.regspacing = res->start - info->io.addr_data;
+ if (res_second) {
+ if (res_second->start > info->io.addr_data)
+ info->io.regspacing = res_second->start - info->io.addr_data;
}
info->io.regsize = DEFAULT_REGSPACING;
info->io.regshift = 0;
#ifdef CONFIG_ACPI
pnp_register_driver(&ipmi_pnp_driver);
+ pnp_registered = 1;
#endif
#ifdef CONFIG_DMI
pci_unregister_driver(&ipmi_pci_driver);
#endif
#ifdef CONFIG_ACPI
- pnp_unregister_driver(&ipmi_pnp_driver);
+ if (pnp_registered)
+ pnp_unregister_driver(&ipmi_pnp_driver);
#endif
#ifdef CONFIG_PPC_OF
/*
* capabilities for /dev/zero
* - permits private mappings, "copies" are taken of the source of zeros
+ * - no writeback happens
*/
static struct backing_dev_info zero_bdi = {
.name = "char/mem",
- .capabilities = BDI_CAP_MAP_COPY,
+ .capabilities = BDI_CAP_MAP_COPY | BDI_CAP_NO_ACCT_AND_WRITEBACK,
};
static const struct file_operations full_fops = {
/*
* Wait till the host acknowledges it pushed out the data we
- * sent. This is done for ports in blocking mode or for data
- * from the hvc_console; the tty operations are performed with
- * spinlocks held so we can't sleep here.
+ * sent. This is done for data from the hvc_console; the tty
+ * operations are performed with spinlocks held so we can't
+ * sleep here. An alternative would be to copy the data to a
+ * buffer and relax the spinning requirement. The downside is
+ * we need to kmalloc a GFP_ATOMIC buffer each time the
+ * console driver writes something out.
*/
while (!virtqueue_get_buf(out_vq, &len))
cpu_relax();
ssize_t ret;
bool nonblock;
+ /* Userspace could be out to fool us */
+ if (!count)
+ return 0;
+
port = filp->private_data;
nonblock = filp->f_flags & O_NONBLOCK;
goto free_buf;
}
+ /*
+ * We now ask send_buf() to not spin for generic ports -- we
+ * can re-use the same code path that non-blocking file
+ * descriptors take for blocking file descriptors since the
+ * wait is already done and we're certain the write will go
+ * through to the host.
+ */
+ nonblock = true;
ret = send_buf(port, buf, count, nonblock);
if (nonblock && ret > 0)
poll_wait(filp, &port->waitqueue, wait);
ret = 0;
- if (port->inbuf)
+ if (!will_read_block(port))
ret |= POLLIN | POLLRDNORM;
if (!will_write_block(port))
ret |= POLLOUT;
* Limiting Performance Impact
* ---------------------------
* C states, especially those with large exit latencies, can have a real
- * noticable impact on workloads, which is not acceptable for most sysadmins,
+ * noticeable impact on workloads, which is not acceptable for most sysadmins,
* and in addition, less performance has a power price of its own.
*
* As a general rule of thumb, menu assumes that the following heuristic
dma->device_issue_pending = ioat2_issue_pending;
dma->device_alloc_chan_resources = ioat2_alloc_chan_resources;
dma->device_free_chan_resources = ioat2_free_chan_resources;
- dma->device_tx_status = ioat_tx_status;
+ dma->device_tx_status = ioat_dma_tx_status;
err = ioat_probe(device);
if (err)
static void mv_xor_device_clear_eoc_cause(struct mv_xor_chan *chan)
{
- u32 val = (1 << (1 + (chan->idx * 16)));
+ u32 val = ~(1 << (chan->idx * 16));
dev_dbg(chan->device->common.dev, "%s, val 0x%08x\n", __func__, val);
__raw_writel(val, XOR_INTR_CAUSE(chan));
}
sh_chan = to_sh_chan(chan);
param = chan->private;
- slave_addr = param->config->addr;
/* Someone calling slave DMA on a public channel? */
if (!param || !sg_len) {
return NULL;
}
+ slave_addr = param->config->addr;
+
/*
* if (param != NULL), this is a successfully requested slave channel,
* therefore param->config != NULL too.
{
int status;
+ if (mci->op_state != OP_RUNNING_POLL)
+ return;
+
status = cancel_delayed_work(&mci->work);
if (status == 0) {
debugf0("%s() not canceled, flush the queue\n",
ATTR_COUNTER(0),
ATTR_COUNTER(1),
ATTR_COUNTER(2),
+ { .attr = { .name = NULL } }
};
static struct mcidev_sysfs_group i7core_udimm_counters = {
const struct pci_device_id *ent)
{
struct fw_ohci *ohci;
- u32 bus_options, max_receive, link_speed, version, link_enh;
+ u32 bus_options, max_receive, link_speed, version;
u64 guid;
int i, err, n_ir, n_it;
size_t size;
if (param_quirks)
ohci->quirks = param_quirks;
- /* TI OHCI-Lynx and compatible: set recommended configuration bits. */
- if (dev->vendor == PCI_VENDOR_ID_TI) {
- pci_read_config_dword(dev, PCI_CFG_TI_LinkEnh, &link_enh);
-
- /* adjust latency of ATx FIFO: use 1.7 KB threshold */
- link_enh &= ~TI_LinkEnh_atx_thresh_mask;
- link_enh |= TI_LinkEnh_atx_thresh_1_7K;
-
- /* use priority arbitration for asynchronous responses */
- link_enh |= TI_LinkEnh_enab_unfair;
-
- /* required for aPhyEnhanceEnable to work */
- link_enh |= TI_LinkEnh_enab_accel;
-
- pci_write_config_dword(dev, PCI_CFG_TI_LinkEnh, link_enh);
- }
-
ar_context_init(&ohci->ar_request_ctx, ohci,
OHCI1394_AsReqRcvContextControlSet);
#define OHCI1394_phy_tcode 0xe
-/* TI extensions */
-
-#define PCI_CFG_TI_LinkEnh 0xf4
-#define TI_LinkEnh_enab_accel 0x00000002
-#define TI_LinkEnh_enab_unfair 0x00000080
-#define TI_LinkEnh_atx_thresh_mask 0x00003000
-#define TI_LinkEnh_atx_thresh_1_7K 0x00001000
-
#endif /* _FIREWIRE_OHCI_H */
* user_data: A pointer the data that is copied to the buffer.
* size: The Number of bytes to copy.
*/
-extern int drm_buffer_copy_from_user(struct drm_buffer *buf,
- void __user *user_data, int size)
+int drm_buffer_copy_from_user(struct drm_buffer *buf,
+ void __user *user_data, int size)
{
int nr_pages = size / PAGE_SIZE + 1;
int idx;
{
int idx = drm_buffer_index(buf);
int page = drm_buffer_page(buf);
- void *obj = 0;
+ void *obj = NULL;
if (idx + objsize <= PAGE_SIZE) {
obj = &buf->data[page][idx];
return -ENOMEM;
kref_init(&obj->refcount);
- kref_init(&obj->handlecount);
+ atomic_set(&obj->handle_count, 0);
obj->size = size;
atomic_inc(&dev->object_count);
}
EXPORT_SYMBOL(drm_gem_object_free);
-/**
- * Called after the last reference to the object has been lost.
- * Must be called without holding struct_mutex
- *
- * Frees the object
- */
-void
-drm_gem_object_free_unlocked(struct kref *kref)
-{
- struct drm_gem_object *obj = (struct drm_gem_object *) kref;
- struct drm_device *dev = obj->dev;
-
- if (dev->driver->gem_free_object_unlocked != NULL)
- dev->driver->gem_free_object_unlocked(obj);
- else if (dev->driver->gem_free_object != NULL) {
- mutex_lock(&dev->struct_mutex);
- dev->driver->gem_free_object(obj);
- mutex_unlock(&dev->struct_mutex);
- }
-}
-EXPORT_SYMBOL(drm_gem_object_free_unlocked);
-
static void drm_gem_object_ref_bug(struct kref *list_kref)
{
BUG();
* called before drm_gem_object_free or we'll be touching
* freed memory
*/
-void
-drm_gem_object_handle_free(struct kref *kref)
+void drm_gem_object_handle_free(struct drm_gem_object *obj)
{
- struct drm_gem_object *obj = container_of(kref,
- struct drm_gem_object,
- handlecount);
struct drm_device *dev = obj->dev;
/* Remove any name for this object */
struct drm_gem_object *obj = vma->vm_private_data;
drm_gem_object_reference(obj);
+
+ mutex_lock(&obj->dev->struct_mutex);
+ drm_vm_open_locked(vma);
+ mutex_unlock(&obj->dev->struct_mutex);
}
EXPORT_SYMBOL(drm_gem_vm_open);
{
struct drm_gem_object *obj = vma->vm_private_data;
- drm_gem_object_unreference_unlocked(obj);
+ mutex_lock(&obj->dev->struct_mutex);
+ drm_vm_close_locked(vma);
+ drm_gem_object_unreference(obj);
+ mutex_unlock(&obj->dev->struct_mutex);
}
EXPORT_SYMBOL(drm_gem_vm_close);
seq_printf(m, "%6d %8zd %7d %8d\n",
obj->name, obj->size,
- atomic_read(&obj->handlecount.refcount),
+ atomic_read(&obj->handle_count),
atomic_read(&obj->refcount.refcount));
return 0;
}
mutex_unlock(&dev->struct_mutex);
}
-/**
- * \c close method for all virtual memory types.
- *
- * \param vma virtual memory area.
- *
- * Search the \p vma private data entry in drm_device::vmalist, unlink it, and
- * free it.
- */
-static void drm_vm_close(struct vm_area_struct *vma)
+void drm_vm_close_locked(struct vm_area_struct *vma)
{
struct drm_file *priv = vma->vm_file->private_data;
struct drm_device *dev = priv->minor->dev;
vma->vm_start, vma->vm_end - vma->vm_start);
atomic_dec(&dev->vma_count);
- mutex_lock(&dev->struct_mutex);
list_for_each_entry_safe(pt, temp, &dev->vmalist, head) {
if (pt->vma == vma) {
list_del(&pt->head);
break;
}
}
+}
+
+/**
+ * \c close method for all virtual memory types.
+ *
+ * \param vma virtual memory area.
+ *
+ * Search the \p vma private data entry in drm_device::vmalist, unlink it, and
+ * free it.
+ */
+static void drm_vm_close(struct vm_area_struct *vma)
+{
+ struct drm_file *priv = vma->vm_file->private_data;
+ struct drm_device *dev = priv->minor->dev;
+
+ mutex_lock(&dev->struct_mutex);
+ drm_vm_close_locked(vma);
mutex_unlock(&dev->struct_mutex);
}
static const struct file_operations i810_buffer_fops = {
.open = drm_open,
.release = drm_release,
- .unlocked_ioctl = drm_ioctl,
+ .unlocked_ioctl = i810_ioctl,
.mmap = i810_mmap_buffers,
.fasync = drm_fasync,
};
static const struct file_operations i830_buffer_fops = {
.open = drm_open,
.release = drm_release,
- .unlocked_ioctl = drm_ioctl,
+ .unlocked_ioctl = i830_ioctl,
.mmap = i830_mmap_buffers,
.fasync = drm_fasync,
};
}
}
- div_u64(diff, diff1);
+ diff = div_u64(diff, diff1);
ret = ((m * diff) + c);
- div_u64(ret, 10);
+ ret = div_u64(ret, 10);
dev_priv->last_count1 = total_count;
dev_priv->last_time1 = now;
/* More magic constants... */
diff = diff * 1181;
- div_u64(diff, diffms * 10);
+ diff = div_u64(diff, diffms * 10);
dev_priv->gfx_power = diff;
}
dev_priv->mchdev_lock = &mchdev_lock;
spin_unlock(&mchdev_lock);
+ /* XXX Prevent module unload due to memory corruption bugs. */
+ __module_get(THIS_MODULE);
+
return 0;
out_workqueue_free:
INTEL_VGA_DEVICE(0x2e22, &intel_g45_info), /* G45_G */
INTEL_VGA_DEVICE(0x2e32, &intel_g45_info), /* G41_G */
INTEL_VGA_DEVICE(0x2e42, &intel_g45_info), /* B43_G */
+ INTEL_VGA_DEVICE(0x2e92, &intel_g45_info), /* B43_G.1 */
INTEL_VGA_DEVICE(0xa001, &intel_pineview_info),
INTEL_VGA_DEVICE(0xa011, &intel_pineview_info),
INTEL_VGA_DEVICE(0x0042, &intel_ironlake_d_info),
return -ENOMEM;
ret = drm_gem_handle_create(file_priv, obj, &handle);
+ /* drop reference from allocate - handle holds it now */
+ drm_gem_object_unreference_unlocked(obj);
if (ret) {
- drm_gem_object_unreference_unlocked(obj);
return ret;
}
- /* Sink the floating reference from kref_init(handlecount) */
- drm_gem_object_handle_unreference_unlocked(obj);
-
args->handle = handle;
return 0;
}
return -ENOENT;
obj_priv = to_intel_bo(obj);
- /* Bounds check source.
- *
- * XXX: This could use review for overflow issues...
- */
- if (args->offset > obj->size || args->size > obj->size ||
- args->offset + args->size > obj->size) {
- drm_gem_object_unreference_unlocked(obj);
- return -EINVAL;
+ /* Bounds check source. */
+ if (args->offset > obj->size || args->size > obj->size - args->offset) {
+ ret = -EINVAL;
+ goto err;
+ }
+
+ if (!access_ok(VERIFY_WRITE,
+ (char __user *)(uintptr_t)args->data_ptr,
+ args->size)) {
+ ret = -EFAULT;
+ goto err;
}
if (i915_gem_object_needs_bit17_swizzle(obj)) {
file_priv);
}
+err:
drm_gem_object_unreference_unlocked(obj);
-
return ret;
}
user_data = (char __user *) (uintptr_t) args->data_ptr;
remain = args->size;
- if (!access_ok(VERIFY_READ, user_data, remain))
- return -EFAULT;
mutex_lock(&dev->struct_mutex);
return -ENOENT;
obj_priv = to_intel_bo(obj);
- /* Bounds check destination.
- *
- * XXX: This could use review for overflow issues...
- */
- if (args->offset > obj->size || args->size > obj->size ||
- args->offset + args->size > obj->size) {
- drm_gem_object_unreference_unlocked(obj);
- return -EINVAL;
+ /* Bounds check destination. */
+ if (args->offset > obj->size || args->size > obj->size - args->offset) {
+ ret = -EINVAL;
+ goto err;
+ }
+
+ if (!access_ok(VERIFY_READ,
+ (char __user *)(uintptr_t)args->data_ptr,
+ args->size)) {
+ ret = -EFAULT;
+ goto err;
}
/* We can only do the GTT pwrite on untiled buffers, as otherwise
DRM_INFO("pwrite failed %d\n", ret);
#endif
+err:
drm_gem_object_unreference_unlocked(obj);
-
return ret;
}
reg->obj = obj;
- if (IS_GEN6(dev))
+ switch (INTEL_INFO(dev)->gen) {
+ case 6:
sandybridge_write_fence_reg(reg);
- else if (IS_I965G(dev))
+ break;
+ case 5:
+ case 4:
i965_write_fence_reg(reg);
- else if (IS_I9XX(dev))
+ break;
+ case 3:
i915_write_fence_reg(reg);
- else
+ break;
+ case 2:
i830_write_fence_reg(reg);
+ break;
+ }
trace_i915_gem_object_get_fence(obj, obj_priv->fence_reg,
obj_priv->tiling_mode);
struct drm_i915_gem_object *obj_priv = to_intel_bo(obj);
struct drm_i915_fence_reg *reg =
&dev_priv->fence_regs[obj_priv->fence_reg];
+ uint32_t fence_reg;
- if (IS_GEN6(dev)) {
+ switch (INTEL_INFO(dev)->gen) {
+ case 6:
I915_WRITE64(FENCE_REG_SANDYBRIDGE_0 +
(obj_priv->fence_reg * 8), 0);
- } else if (IS_I965G(dev)) {
+ break;
+ case 5:
+ case 4:
I915_WRITE64(FENCE_REG_965_0 + (obj_priv->fence_reg * 8), 0);
- } else {
- uint32_t fence_reg;
-
- if (obj_priv->fence_reg < 8)
- fence_reg = FENCE_REG_830_0 + obj_priv->fence_reg * 4;
+ break;
+ case 3:
+ if (obj_priv->fence_reg >= 8)
+ fence_reg = FENCE_REG_945_8 + (obj_priv->fence_reg - 8) * 4;
else
- fence_reg = FENCE_REG_945_8 + (obj_priv->fence_reg -
- 8) * 4;
+ case 2:
+ fence_reg = FENCE_REG_830_0 + obj_priv->fence_reg * 4;
I915_WRITE(fence_reg, 0);
+ break;
}
reg->obj = NULL;
(int) reloc->offset,
reloc->read_domains,
reloc->write_domain);
+ drm_gem_object_unreference(target_obj);
+ i915_gem_object_unpin(obj);
return -EINVAL;
}
if (reloc->write_domain & I915_GEM_DOMAIN_CPU ||
struct list_head *unwind)
{
list_add(&obj_priv->evict_list, unwind);
+ drm_gem_object_reference(&obj_priv->base);
return drm_mm_scan_add_block(obj_priv->gtt_space);
}
{
drm_i915_private_t *dev_priv = dev->dev_private;
struct list_head eviction_list, unwind_list;
- struct drm_i915_gem_object *obj_priv, *tmp_obj_priv;
+ struct drm_i915_gem_object *obj_priv;
struct list_head *render_iter, *bsd_iter;
int ret = 0;
list_for_each_entry(obj_priv, &unwind_list, evict_list) {
ret = drm_mm_scan_remove_block(obj_priv->gtt_space);
BUG_ON(ret);
+ drm_gem_object_unreference(&obj_priv->base);
}
/* We expect the caller to unpin, evict all and try again, or give up.
return -ENOSPC;
found:
+ /* drm_mm doesn't allow any other other operations while
+ * scanning, therefore store to be evicted objects on a
+ * temporary list. */
INIT_LIST_HEAD(&eviction_list);
- list_for_each_entry_safe(obj_priv, tmp_obj_priv,
- &unwind_list, evict_list) {
+ while (!list_empty(&unwind_list)) {
+ obj_priv = list_first_entry(&unwind_list,
+ struct drm_i915_gem_object,
+ evict_list);
if (drm_mm_scan_remove_block(obj_priv->gtt_space)) {
- /* drm_mm doesn't allow any other other operations while
- * scanning, therefore store to be evicted objects on a
- * temporary list. */
list_move(&obj_priv->evict_list, &eviction_list);
+ continue;
}
+ list_del(&obj_priv->evict_list);
+ drm_gem_object_unreference(&obj_priv->base);
}
/* Unbinding will emit any required flushes */
- list_for_each_entry_safe(obj_priv, tmp_obj_priv,
- &eviction_list, evict_list) {
-#if WATCH_LRU
- DRM_INFO("%s: evicting %p\n", __func__, obj);
-#endif
- ret = i915_gem_object_unbind(&obj_priv->base);
- if (ret)
- return ret;
+ while (!list_empty(&eviction_list)) {
+ obj_priv = list_first_entry(&eviction_list,
+ struct drm_i915_gem_object,
+ evict_list);
+ if (ret == 0)
+ ret = i915_gem_object_unbind(&obj_priv->base);
+ list_del(&obj_priv->evict_list);
+ drm_gem_object_unreference(&obj_priv->base);
}
- /* The just created free hole should be on the top of the free stack
- * maintained by drm_mm, so this BUG_ON actually executes in O(1).
- * Furthermore all accessed data has just recently been used, so it
- * should be really fast, too. */
- BUG_ON(!drm_mm_search_free(&dev_priv->mm.gtt_space, min_size,
- alignment, 0));
-
- return 0;
+ return ret;
}
int
dev_priv->saveSWF2[i] = I915_READ(SWF30 + (i << 2));
/* Fences */
- if (IS_I965G(dev)) {
+ switch (INTEL_INFO(dev)->gen) {
+ case 6:
+ for (i = 0; i < 16; i++)
+ dev_priv->saveFENCE[i] = I915_READ64(FENCE_REG_SANDYBRIDGE_0 + (i * 8));
+ break;
+ case 5:
+ case 4:
for (i = 0; i < 16; i++)
dev_priv->saveFENCE[i] = I915_READ64(FENCE_REG_965_0 + (i * 8));
- } else {
- for (i = 0; i < 8; i++)
- dev_priv->saveFENCE[i] = I915_READ(FENCE_REG_830_0 + (i * 4));
-
+ break;
+ case 3:
if (IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev))
for (i = 0; i < 8; i++)
dev_priv->saveFENCE[i+8] = I915_READ(FENCE_REG_945_8 + (i * 4));
+ case 2:
+ for (i = 0; i < 8; i++)
+ dev_priv->saveFENCE[i] = I915_READ(FENCE_REG_830_0 + (i * 4));
+ break;
+
}
return 0;
I915_WRITE(HWS_PGA, dev_priv->saveHWS);
/* Fences */
- if (IS_I965G(dev)) {
+ switch (INTEL_INFO(dev)->gen) {
+ case 6:
+ for (i = 0; i < 16; i++)
+ I915_WRITE64(FENCE_REG_SANDYBRIDGE_0 + (i * 8), dev_priv->saveFENCE[i]);
+ break;
+ case 5:
+ case 4:
for (i = 0; i < 16; i++)
I915_WRITE64(FENCE_REG_965_0 + (i * 8), dev_priv->saveFENCE[i]);
- } else {
- for (i = 0; i < 8; i++)
- I915_WRITE(FENCE_REG_830_0 + (i * 4), dev_priv->saveFENCE[i]);
+ break;
+ case 3:
+ case 2:
if (IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev))
for (i = 0; i < 8; i++)
I915_WRITE(FENCE_REG_945_8 + (i * 4), dev_priv->saveFENCE[i+8]);
+ for (i = 0; i < 8; i++)
+ I915_WRITE(FENCE_REG_830_0 + (i * 4), dev_priv->saveFENCE[i]);
+ break;
}
i915_restore_display(dev);
if (wait_for((I915_READ(PCH_ADPA) & ADPA_CRT_HOTPLUG_FORCE_TRIGGER) == 0,
1000, 1))
- DRM_ERROR("timed out waiting for FORCE_TRIGGER");
+ DRM_DEBUG_KMS("timed out waiting for FORCE_TRIGGER");
if (turn_off_dac) {
I915_WRITE(PCH_ADPA, temp);
if (wait_for((I915_READ(PORT_HOTPLUG_EN) &
CRT_HOTPLUG_FORCE_DETECT) == 0,
1000, 1))
- DRM_ERROR("timed out waiting for FORCE_DETECT to go off");
+ DRM_DEBUG_KMS("timed out waiting for FORCE_DETECT to go off");
}
stat = I915_READ(PORT_HOTPLUG_STAT);
DRM_DEBUG_KMS("vblank wait timed out\n");
}
-/**
- * intel_wait_for_vblank_off - wait for vblank after disabling a pipe
+/*
+ * intel_wait_for_pipe_off - wait for pipe to turn off
* @dev: drm device
* @pipe: pipe to wait for
*
* spinning on the vblank interrupt status bit, since we won't actually
* see an interrupt when the pipe is disabled.
*
- * So this function waits for the display line value to settle (it
- * usually ends up stopping at the start of the next frame).
+ * On Gen4 and above:
+ * wait for the pipe register state bit to turn off
+ *
+ * Otherwise:
+ * wait for the display line value to settle (it usually
+ * ends up stopping at the start of the next frame).
+ *
*/
-void intel_wait_for_vblank_off(struct drm_device *dev, int pipe)
+static void intel_wait_for_pipe_off(struct drm_device *dev, int pipe)
{
struct drm_i915_private *dev_priv = dev->dev_private;
- int pipedsl_reg = (pipe == 0 ? PIPEADSL : PIPEBDSL);
- unsigned long timeout = jiffies + msecs_to_jiffies(100);
- u32 last_line;
-
- /* Wait for the display line to settle */
- do {
- last_line = I915_READ(pipedsl_reg) & DSL_LINEMASK;
- mdelay(5);
- } while (((I915_READ(pipedsl_reg) & DSL_LINEMASK) != last_line) &&
- time_after(timeout, jiffies));
-
- if (time_after(jiffies, timeout))
- DRM_DEBUG_KMS("vblank wait timed out\n");
+
+ if (INTEL_INFO(dev)->gen >= 4) {
+ int pipeconf_reg = (pipe == 0 ? PIPEACONF : PIPEBCONF);
+
+ /* Wait for the Pipe State to go off */
+ if (wait_for((I915_READ(pipeconf_reg) & I965_PIPECONF_ACTIVE) == 0,
+ 100, 0))
+ DRM_DEBUG_KMS("pipe_off wait timed out\n");
+ } else {
+ u32 last_line;
+ int pipedsl_reg = (pipe == 0 ? PIPEADSL : PIPEBDSL);
+ unsigned long timeout = jiffies + msecs_to_jiffies(100);
+
+ /* Wait for the display line to settle */
+ do {
+ last_line = I915_READ(pipedsl_reg) & DSL_LINEMASK;
+ mdelay(5);
+ } while (((I915_READ(pipedsl_reg) & DSL_LINEMASK) != last_line) &&
+ time_after(timeout, jiffies));
+ if (time_after(jiffies, timeout))
+ DRM_DEBUG_KMS("pipe_off wait timed out\n");
+ }
}
/* Parameters have changed, update FBC info */
I915_READ(dspbase_reg);
}
- /* Wait for vblank for the disable to take effect */
- intel_wait_for_vblank_off(dev, pipe);
-
/* Don't disable pipe A or pipe A PLLs if needed */
if (pipeconf_reg == PIPEACONF &&
- (dev_priv->quirks & QUIRK_PIPEA_FORCE))
+ (dev_priv->quirks & QUIRK_PIPEA_FORCE)) {
+ /* Wait for vblank for the disable to take effect */
+ intel_wait_for_vblank(dev, pipe);
goto skip_pipe_off;
+ }
/* Next, disable display pipes */
temp = I915_READ(pipeconf_reg);
I915_READ(pipeconf_reg);
}
- /* Wait for vblank for the disable to take effect. */
- intel_wait_for_vblank_off(dev, pipe);
+ /* Wait for the pipe to turn off */
+ intel_wait_for_pipe_off(dev, pipe);
temp = I915_READ(dpll_reg);
if ((temp & DPLL_VCO_ENABLE) != 0) {
struct drm_display_mode *adjusted_mode)
{
struct drm_device *dev = crtc->dev;
+
if (HAS_PCH_SPLIT(dev)) {
/* FDI link clock is fixed at 2.7G */
if (mode->clock * 3 > IRONLAKE_FDI_FREQ * 4)
return false;
}
+
+ /* XXX some encoders set the crtcinfo, others don't.
+ * Obviously we need some form of conflict resolution here...
+ */
+ if (adjusted_mode->crtc_htotal == 0)
+ drm_mode_set_crtcinfo(adjusted_mode, 0);
+
return true;
}
intel_dp_set_link_train(struct intel_dp *intel_dp,
uint32_t dp_reg_value,
uint8_t dp_train_pat,
- uint8_t train_set[4],
- bool first)
+ uint8_t train_set[4])
{
struct drm_device *dev = intel_dp->base.enc.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
- struct intel_crtc *intel_crtc = to_intel_crtc(intel_dp->base.enc.crtc);
int ret;
I915_WRITE(intel_dp->output_reg, dp_reg_value);
POSTING_READ(intel_dp->output_reg);
- if (first)
- intel_wait_for_vblank(dev, intel_crtc->pipe);
intel_dp_aux_native_write_1(intel_dp,
DP_TRAINING_PATTERN_SET,
uint8_t voltage;
bool clock_recovery = false;
bool channel_eq = false;
- bool first = true;
int tries;
u32 reg;
uint32_t DP = intel_dp->DP;
+ struct intel_crtc *intel_crtc = to_intel_crtc(intel_dp->base.enc.crtc);
+
+ /* Enable output, wait for it to become active */
+ I915_WRITE(intel_dp->output_reg, intel_dp->DP);
+ POSTING_READ(intel_dp->output_reg);
+ intel_wait_for_vblank(dev, intel_crtc->pipe);
/* Write the link configuration data */
intel_dp_aux_native_write(intel_dp, DP_LINK_BW_SET,
reg = DP | DP_LINK_TRAIN_PAT_1;
if (!intel_dp_set_link_train(intel_dp, reg,
- DP_TRAINING_PATTERN_1, train_set, first))
+ DP_TRAINING_PATTERN_1, train_set))
break;
- first = false;
/* Set training pattern 1 */
udelay(100);
/* channel eq pattern */
if (!intel_dp_set_link_train(intel_dp, reg,
- DP_TRAINING_PATTERN_2, train_set,
- false))
+ DP_TRAINING_PATTERN_2, train_set))
break;
udelay(400);
struct drm_crtc *crtc);
int intel_get_pipe_from_crtc_id(struct drm_device *dev, void *data,
struct drm_file *file_priv);
-extern void intel_wait_for_vblank_off(struct drm_device *dev, int pipe);
extern void intel_wait_for_vblank(struct drm_device *dev, int pipe);
extern struct drm_crtc *intel_get_crtc_from_pipe(struct drm_device *dev, int pipe);
extern struct drm_crtc *intel_get_load_detect_pipe(struct intel_encoder *intel_encoder,
drm_fb_helper_fini(&ifbdev->helper);
drm_framebuffer_cleanup(&ifb->base);
- if (ifb->obj)
+ if (ifb->obj) {
drm_gem_object_unreference(ifb->obj);
+ ifb->obj = NULL;
+ }
return 0;
}
return true;
err:
- intel_sdvo_destroy_enhance_property(connector);
- kfree(intel_sdvo_connector);
+ intel_sdvo_destroy(connector);
return false;
}
return true;
err:
- intel_sdvo_destroy_enhance_property(connector);
- kfree(intel_sdvo_connector);
+ intel_sdvo_destroy(connector);
return false;
}
uint16_t response;
} enhancements;
- if (!intel_sdvo_get_value(intel_sdvo,
- SDVO_CMD_GET_SUPPORTED_ENHANCEMENTS,
- &enhancements, sizeof(enhancements)))
- return false;
-
+ enhancements.response = 0;
+ intel_sdvo_get_value(intel_sdvo,
+ SDVO_CMD_GET_SUPPORTED_ENHANCEMENTS,
+ &enhancements, sizeof(enhancements));
if (enhancements.response == 0) {
DRM_DEBUG_KMS("No enhancement is supported\n");
return true;
if (nv_encoder->dcb->type == OUTPUT_LVDS &&
(nv_encoder->dcb->lvdsconf.use_straps_for_mode ||
dev_priv->vbios.fp_no_ddc) && nouveau_bios_fp_mode(dev, NULL)) {
- nv_connector->native_mode = drm_mode_create(dev);
- nouveau_bios_fp_mode(dev, nv_connector->native_mode);
+ struct drm_display_mode mode;
+
+ nouveau_bios_fp_mode(dev, &mode);
+ nv_connector->native_mode = drm_mode_duplicate(dev, &mode);
}
/* Find the native mode if this is a digital panel, if we didn't
goto out;
ret = drm_gem_handle_create(file_priv, nvbo->gem, &req->info.handle);
+ /* drop reference from allocate - handle holds it now */
+ drm_gem_object_unreference_unlocked(nvbo->gem);
out:
- drm_gem_object_handle_unreference_unlocked(nvbo->gem);
-
- if (ret)
- drm_gem_object_unreference_unlocked(nvbo->gem);
return ret;
}
#define SW_I2C_CNTL_WRITE1BIT 6
//==============================VESA definition Portion===============================
-#define VESA_OEM_PRODUCT_REV '01.00'
+#define VESA_OEM_PRODUCT_REV "01.00"
#define VESA_MODE_ATTRIBUTE_MODE_SUPPORT 0xBB //refer to VBE spec p.32, no TTY support
#define VESA_MODE_WIN_ATTRIBUTE 7
#define VESA_WIN_SIZE 64
WREG32(RCU_IND_INDEX, 0x203);
efuse_straps_3 = RREG32(RCU_IND_DATA);
- efuse_box_bit_127_124 = (u8)(efuse_straps_3 & 0xF0000000) >> 28;
+ efuse_box_bit_127_124 = (u8)((efuse_straps_3 & 0xF0000000) >> 28);
switch(efuse_box_bit_127_124) {
case 0x0:
rdev->mc.mc_vram_size = RREG32(CONFIG_MEMSIZE) * 1024 * 1024;
rdev->mc.real_vram_size = RREG32(CONFIG_MEMSIZE) * 1024 * 1024;
rdev->mc.visible_vram_size = rdev->mc.aper_size;
+ rdev->mc.active_vram_size = rdev->mc.visible_vram_size;
r600_vram_gtt_location(rdev, &rdev->mc);
radeon_update_bandwidth_info(rdev);
{
u32 tmp;
- WREG32(CP_INT_CNTL, 0);
+ WREG32(CP_INT_CNTL, CNTX_BUSY_INT_ENABLE | CNTX_EMPTY_INT_ENABLE);
WREG32(GRBM_INT_CNTL, 0);
WREG32(INT_MASK + EVERGREEN_CRTC0_REGISTER_OFFSET, 0);
WREG32(INT_MASK + EVERGREEN_CRTC1_REGISTER_OFFSET, 0);
return r;
}
rdev->cp.ready = true;
+ rdev->mc.active_vram_size = rdev->mc.real_vram_size;
return 0;
}
void r100_cp_disable(struct radeon_device *rdev)
{
/* Disable ring */
+ rdev->mc.active_vram_size = rdev->mc.visible_vram_size;
rdev->cp.ready = false;
WREG32(RADEON_CP_CSQ_MODE, 0);
WREG32(RADEON_CP_CSQ_CNTL, 0);
/* FIXME we don't use the second aperture yet when we could use it */
if (rdev->mc.visible_vram_size > rdev->mc.aper_size)
rdev->mc.visible_vram_size = rdev->mc.aper_size;
+ rdev->mc.active_vram_size = rdev->mc.visible_vram_size;
config_aper_size = RREG32(RADEON_CONFIG_APER_SIZE);
if (rdev->flags & RADEON_IS_IGP) {
uint32_t tom;
rdev->mc.mc_vram_size = RREG32(CONFIG_MEMSIZE);
rdev->mc.real_vram_size = RREG32(CONFIG_MEMSIZE);
rdev->mc.visible_vram_size = rdev->mc.aper_size;
+ rdev->mc.active_vram_size = rdev->mc.visible_vram_size;
r600_vram_gtt_location(rdev, &rdev->mc);
if (rdev->flags & RADEON_IS_IGP) {
*/
void r600_cp_stop(struct radeon_device *rdev)
{
+ rdev->mc.active_vram_size = rdev->mc.visible_vram_size;
WREG32(R_0086D8_CP_ME_CNTL, S_0086D8_CP_ME_HALT(1));
}
if (i < rdev->usec_timeout) {
DRM_INFO("ib test succeeded in %u usecs\n", i);
} else {
- DRM_ERROR("radeon: ib test failed (sracth(0x%04X)=0x%08X)\n",
+ DRM_ERROR("radeon: ib test failed (scratch(0x%04X)=0x%08X)\n",
scratch, tmp);
r = -EINVAL;
}
{
u32 tmp;
- WREG32(CP_INT_CNTL, 0);
+ WREG32(CP_INT_CNTL, CNTX_BUSY_INT_ENABLE | CNTX_EMPTY_INT_ENABLE);
WREG32(GRBM_INT_CNTL, 0);
WREG32(DxMODE_INT_MASK, 0);
if (ASIC_IS_DCE3(rdev)) {
/* r7xx hw bug. write to HDP_DEBUG1 followed by fb read
* rather than write to HDP_REG_COHERENCY_FLUSH_CNTL
*/
- if ((rdev->family >= CHIP_RV770) && (rdev->family <= CHIP_RV740)) {
+ if ((rdev->family >= CHIP_RV770) && (rdev->family <= CHIP_RV740) &&
+ rdev->vram_scratch.ptr) {
void __iomem *ptr = (void *)rdev->vram_scratch.ptr;
u32 tmp;
memcpy(ptr + rdev->r600_blit.ps_offset, r6xx_ps, r6xx_ps_size * 4);
radeon_bo_kunmap(rdev->r600_blit.shader_obj);
radeon_bo_unreserve(rdev->r600_blit.shader_obj);
+ rdev->mc.active_vram_size = rdev->mc.real_vram_size;
return 0;
}
{
int r;
+ rdev->mc.active_vram_size = rdev->mc.visible_vram_size;
if (rdev->r600_blit.shader_obj == NULL)
return;
/* If we can't reserve the bo, unref should be enough to destroy
* about vram size near mc fb location */
u64 mc_vram_size;
u64 visible_vram_size;
+ u64 active_vram_size;
u64 gtt_size;
u64 gtt_start;
u64 gtt_end;
*connector_type = DRM_MODE_CONNECTOR_DVID;
}
+ /* MSI K9A2GM V2/V3 board has no HDMI or DVI */
+ if ((dev->pdev->device == 0x796e) &&
+ (dev->pdev->subsystem_vendor == 0x1462) &&
+ (dev->pdev->subsystem_device == 0x7302)) {
+ if ((supported_device == ATOM_DEVICE_DFP2_SUPPORT) ||
+ (supported_device == ATOM_DEVICE_DFP3_SUPPORT))
+ return false;
+ }
+
/* a-bit f-i90hd - ciaranm on #radeonhd - this board has no DVI */
if ((dev->pdev->device == 0x7941) &&
(dev->pdev->subsystem_vendor == 0x147b) &&
switch (tv_info->ucTV_BootUpDefaultStandard) {
case ATOM_TV_NTSC:
tv_std = TV_STD_NTSC;
- DRM_INFO("Default TV standard: NTSC\n");
+ DRM_DEBUG_KMS("Default TV standard: NTSC\n");
break;
case ATOM_TV_NTSCJ:
tv_std = TV_STD_NTSC_J;
- DRM_INFO("Default TV standard: NTSC-J\n");
+ DRM_DEBUG_KMS("Default TV standard: NTSC-J\n");
break;
case ATOM_TV_PAL:
tv_std = TV_STD_PAL;
- DRM_INFO("Default TV standard: PAL\n");
+ DRM_DEBUG_KMS("Default TV standard: PAL\n");
break;
case ATOM_TV_PALM:
tv_std = TV_STD_PAL_M;
- DRM_INFO("Default TV standard: PAL-M\n");
+ DRM_DEBUG_KMS("Default TV standard: PAL-M\n");
break;
case ATOM_TV_PALN:
tv_std = TV_STD_PAL_N;
- DRM_INFO("Default TV standard: PAL-N\n");
+ DRM_DEBUG_KMS("Default TV standard: PAL-N\n");
break;
case ATOM_TV_PALCN:
tv_std = TV_STD_PAL_CN;
- DRM_INFO("Default TV standard: PAL-CN\n");
+ DRM_DEBUG_KMS("Default TV standard: PAL-CN\n");
break;
case ATOM_TV_PAL60:
tv_std = TV_STD_PAL_60;
- DRM_INFO("Default TV standard: PAL-60\n");
+ DRM_DEBUG_KMS("Default TV standard: PAL-60\n");
break;
case ATOM_TV_SECAM:
tv_std = TV_STD_SECAM;
- DRM_INFO("Default TV standard: SECAM\n");
+ DRM_DEBUG_KMS("Default TV standard: SECAM\n");
break;
default:
tv_std = TV_STD_NTSC;
- DRM_INFO("Unknown TV standard; defaulting to NTSC\n");
+ DRM_DEBUG_KMS("Unknown TV standard; defaulting to NTSC\n");
break;
}
}
switch (RBIOS8(tv_info + 7) & 0xf) {
case 1:
tv_std = TV_STD_NTSC;
- DRM_INFO("Default TV standard: NTSC\n");
+ DRM_DEBUG_KMS("Default TV standard: NTSC\n");
break;
case 2:
tv_std = TV_STD_PAL;
- DRM_INFO("Default TV standard: PAL\n");
+ DRM_DEBUG_KMS("Default TV standard: PAL\n");
break;
case 3:
tv_std = TV_STD_PAL_M;
- DRM_INFO("Default TV standard: PAL-M\n");
+ DRM_DEBUG_KMS("Default TV standard: PAL-M\n");
break;
case 4:
tv_std = TV_STD_PAL_60;
- DRM_INFO("Default TV standard: PAL-60\n");
+ DRM_DEBUG_KMS("Default TV standard: PAL-60\n");
break;
case 5:
tv_std = TV_STD_NTSC_J;
- DRM_INFO("Default TV standard: NTSC-J\n");
+ DRM_DEBUG_KMS("Default TV standard: NTSC-J\n");
break;
case 6:
tv_std = TV_STD_SCART_PAL;
- DRM_INFO("Default TV standard: SCART-PAL\n");
+ DRM_DEBUG_KMS("Default TV standard: SCART-PAL\n");
break;
default:
tv_std = TV_STD_NTSC;
- DRM_INFO
+ DRM_DEBUG_KMS
("Unknown TV standard; defaulting to NTSC\n");
break;
}
switch ((RBIOS8(tv_info + 9) >> 2) & 0x3) {
case 0:
- DRM_INFO("29.498928713 MHz TV ref clk\n");
+ DRM_DEBUG_KMS("29.498928713 MHz TV ref clk\n");
break;
case 1:
- DRM_INFO("28.636360000 MHz TV ref clk\n");
+ DRM_DEBUG_KMS("28.636360000 MHz TV ref clk\n");
break;
case 2:
- DRM_INFO("14.318180000 MHz TV ref clk\n");
+ DRM_DEBUG_KMS("14.318180000 MHz TV ref clk\n");
break;
case 3:
- DRM_INFO("27.000000000 MHz TV ref clk\n");
+ DRM_DEBUG_KMS("27.000000000 MHz TV ref clk\n");
break;
default:
break;
if (tmds_info) {
ver = RBIOS8(tmds_info);
- DRM_INFO("DFP table revision: %d\n", ver);
+ DRM_DEBUG_KMS("DFP table revision: %d\n", ver);
if (ver == 3) {
n = RBIOS8(tmds_info + 5) + 1;
if (n > 4)
offset = combios_get_table_offset(dev, COMBIOS_EXT_TMDS_INFO_TABLE);
if (offset) {
ver = RBIOS8(offset);
- DRM_INFO("External TMDS Table revision: %d\n", ver);
+ DRM_DEBUG_KMS("External TMDS Table revision: %d\n", ver);
tmds->slave_addr = RBIOS8(offset + 4 + 2);
tmds->slave_addr >>= 1; /* 7 bit addressing */
gpio = RBIOS8(offset + 4 + 3);
struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc);
struct radeon_device *rdev = crtc->dev->dev_private;
int xorigin = 0, yorigin = 0;
+ int w = radeon_crtc->cursor_width;
if (x < 0)
xorigin = -x + 1;
if (yorigin >= CURSOR_HEIGHT)
yorigin = CURSOR_HEIGHT - 1;
- radeon_lock_cursor(crtc, true);
- if (ASIC_IS_DCE4(rdev)) {
- /* cursors are offset into the total surface */
- x += crtc->x;
- y += crtc->y;
- DRM_DEBUG("x %d y %d c->x %d c->y %d\n", x, y, crtc->x, crtc->y);
-
- /* XXX: check if evergreen has the same issues as avivo chips */
- WREG32(EVERGREEN_CUR_POSITION + radeon_crtc->crtc_offset,
- ((xorigin ? 0 : x) << 16) |
- (yorigin ? 0 : y));
- WREG32(EVERGREEN_CUR_HOT_SPOT + radeon_crtc->crtc_offset, (xorigin << 16) | yorigin);
- WREG32(EVERGREEN_CUR_SIZE + radeon_crtc->crtc_offset,
- ((radeon_crtc->cursor_width - 1) << 16) | (radeon_crtc->cursor_height - 1));
- } else if (ASIC_IS_AVIVO(rdev)) {
- int w = radeon_crtc->cursor_width;
+ if (ASIC_IS_AVIVO(rdev)) {
int i = 0;
struct drm_crtc *crtc_p;
if (w <= 0)
w = 1;
}
+ }
+ radeon_lock_cursor(crtc, true);
+ if (ASIC_IS_DCE4(rdev)) {
+ WREG32(EVERGREEN_CUR_POSITION + radeon_crtc->crtc_offset,
+ ((xorigin ? 0 : x) << 16) |
+ (yorigin ? 0 : y));
+ WREG32(EVERGREEN_CUR_HOT_SPOT + radeon_crtc->crtc_offset, (xorigin << 16) | yorigin);
+ WREG32(EVERGREEN_CUR_SIZE + radeon_crtc->crtc_offset,
+ ((w - 1) << 16) | (radeon_crtc->cursor_height - 1));
+ } else if (ASIC_IS_AVIVO(rdev)) {
WREG32(AVIVO_D1CUR_POSITION + radeon_crtc->crtc_offset,
((xorigin ? 0 : x) << 16) |
(yorigin ? 0 : y));
DRM_INFO(" DFP4: %s\n", encoder_names[radeon_encoder->encoder_id]);
if (devices & ATOM_DEVICE_DFP5_SUPPORT)
DRM_INFO(" DFP5: %s\n", encoder_names[radeon_encoder->encoder_id]);
+ if (devices & ATOM_DEVICE_DFP6_SUPPORT)
+ DRM_INFO(" DFP6: %s\n", encoder_names[radeon_encoder->encoder_id]);
if (devices & ATOM_DEVICE_TV1_SUPPORT)
DRM_INFO(" TV1: %s\n", encoder_names[radeon_encoder->encoder_id]);
if (devices & ATOM_DEVICE_CV_SUPPORT)
{
struct radeon_framebuffer *radeon_fb = to_radeon_framebuffer(fb);
- if (radeon_fb->obj)
+ if (radeon_fb->obj) {
drm_gem_object_unreference_unlocked(radeon_fb->obj);
+ }
drm_framebuffer_cleanup(fb);
kfree(radeon_fb);
}
ret = radeon_bo_reserve(rbo, false);
if (likely(ret == 0)) {
radeon_bo_kunmap(rbo);
+ radeon_bo_unpin(rbo);
radeon_bo_unreserve(rbo);
}
drm_gem_object_unreference_unlocked(gobj);
{
struct fb_info *info;
struct radeon_framebuffer *rfb = &rfbdev->rfb;
- struct radeon_bo *rbo;
- int r;
if (rfbdev->helper.fbdev) {
info = rfbdev->helper.fbdev;
}
if (rfb->obj) {
- rbo = rfb->obj->driver_private;
- r = radeon_bo_reserve(rbo, false);
- if (likely(r == 0)) {
- radeon_bo_kunmap(rbo);
- radeon_bo_unpin(rbo);
- radeon_bo_unreserve(rbo);
- }
- drm_gem_object_unreference_unlocked(rfb->obj);
+ radeonfb_destroy_pinned_object(rfb->obj);
+ rfb->obj = NULL;
}
drm_fb_helper_fini(&rfbdev->helper);
drm_framebuffer_cleanup(&rfb->base);
return r;
}
r = drm_gem_handle_create(filp, gobj, &handle);
+ /* drop reference from allocate - handle holds it now */
+ drm_gem_object_unreference_unlocked(gobj);
if (r) {
- drm_gem_object_unreference_unlocked(gobj);
return r;
}
- drm_gem_object_handle_unreference_unlocked(gobj);
args->handle = handle;
return 0;
}
*/
int radeon_driver_firstopen_kms(struct drm_device *dev)
{
+ struct radeon_device *rdev = dev->dev_private;
+
+ if (rdev->powered_down)
+ return -EINVAL;
return 0;
}
u32 c = 0;
rbo->placement.fpfn = 0;
- rbo->placement.lpfn = 0;
+ rbo->placement.lpfn = rbo->rdev->mc.active_vram_size >> PAGE_SHIFT;
rbo->placement.placement = rbo->placements;
rbo->placement.busy_placement = rbo->placements;
if (domain & RADEON_GEM_DOMAIN_VRAM)
int r;
r = ttm_bo_reserve(&bo->tbo, true, no_wait, false, 0);
- if (unlikely(r != 0)) {
- if (r != -ERESTARTSYS)
- dev_err(bo->rdev->dev, "%p reserve failed for wait\n", bo);
+ if (unlikely(r != 0))
return r;
- }
spin_lock(&bo->tbo.lock);
if (mem_type)
*mem_type = bo->tbo.mem.mem_type;
rdev->mc.real_vram_size = RREG32(RADEON_CONFIG_MEMSIZE);
rdev->mc.mc_vram_size = rdev->mc.real_vram_size;
rdev->mc.visible_vram_size = rdev->mc.aper_size;
+ rdev->mc.active_vram_size = rdev->mc.visible_vram_size;
rdev->mc.igp_sideport_enabled = radeon_atombios_sideport_present(rdev);
base = RREG32_MC(R_000004_MC_FB_LOCATION);
base = G_000004_MC_FB_START(base) << 16;
rdev->mc.aper_base = pci_resource_start(rdev->pdev, 0);
rdev->mc.aper_size = pci_resource_len(rdev->pdev, 0);
rdev->mc.visible_vram_size = rdev->mc.aper_size;
+ rdev->mc.active_vram_size = rdev->mc.visible_vram_size;
base = RREG32_MC(R_000100_MCCFG_FB_LOCATION);
base = G_000100_MC_FB_START(base) << 16;
rdev->mc.igp_sideport_enabled = radeon_atombios_sideport_present(rdev);
*/
void r700_cp_stop(struct radeon_device *rdev)
{
+ rdev->mc.active_vram_size = rdev->mc.visible_vram_size;
WREG32(CP_ME_CNTL, (CP_ME_HALT | CP_PFP_HALT));
}
rdev->mc.mc_vram_size = RREG32(CONFIG_MEMSIZE);
rdev->mc.real_vram_size = RREG32(CONFIG_MEMSIZE);
rdev->mc.visible_vram_size = rdev->mc.aper_size;
+ rdev->mc.active_vram_size = rdev->mc.visible_vram_size;
r600_vram_gtt_location(rdev, &rdev->mc);
radeon_update_bandwidth_info(rdev);
return ret;
}
+/**
+ * Call bo::reserved and with the lru lock held.
+ * Will release GPU memory type usage on destruction.
+ * This is the place to put in driver specific hooks.
+ * Will release the bo::reserved lock and the
+ * lru lock on exit.
+ */
+
+static void ttm_bo_cleanup_memtype_use(struct ttm_buffer_object *bo)
+{
+ struct ttm_bo_global *glob = bo->glob;
+
+ if (bo->ttm) {
+
+ /**
+ * Release the lru_lock, since we don't want to have
+ * an atomic requirement on ttm_tt[unbind|destroy].
+ */
+
+ spin_unlock(&glob->lru_lock);
+ ttm_tt_unbind(bo->ttm);
+ ttm_tt_destroy(bo->ttm);
+ bo->ttm = NULL;
+ spin_lock(&glob->lru_lock);
+ }
+
+ if (bo->mem.mm_node) {
+ drm_mm_put_block(bo->mem.mm_node);
+ bo->mem.mm_node = NULL;
+ }
+
+ atomic_set(&bo->reserved, 0);
+ wake_up_all(&bo->event_queue);
+ spin_unlock(&glob->lru_lock);
+}
+
+
/**
* If bo idle, remove from delayed- and lru lists, and unref.
* If not idle, and already on delayed list, do nothing.
int ret;
spin_lock(&bo->lock);
+retry:
(void) ttm_bo_wait(bo, false, false, !remove_all);
if (!bo->sync_obj) {
spin_unlock(&bo->lock);
spin_lock(&glob->lru_lock);
- put_count = ttm_bo_del_from_lru(bo);
+ ret = ttm_bo_reserve_locked(bo, false, !remove_all, false, 0);
+
+ /**
+ * Someone else has the object reserved. Bail and retry.
+ */
- ret = ttm_bo_reserve_locked(bo, false, false, false, 0);
- BUG_ON(ret);
- if (bo->ttm)
- ttm_tt_unbind(bo->ttm);
+ if (unlikely(ret == -EBUSY)) {
+ spin_unlock(&glob->lru_lock);
+ spin_lock(&bo->lock);
+ goto requeue;
+ }
+
+ /**
+ * We can re-check for sync object without taking
+ * the bo::lock since setting the sync object requires
+ * also bo::reserved. A busy object at this point may
+ * be caused by another thread starting an accelerated
+ * eviction.
+ */
+
+ if (unlikely(bo->sync_obj)) {
+ atomic_set(&bo->reserved, 0);
+ wake_up_all(&bo->event_queue);
+ spin_unlock(&glob->lru_lock);
+ spin_lock(&bo->lock);
+ if (remove_all)
+ goto retry;
+ else
+ goto requeue;
+ }
+
+ put_count = ttm_bo_del_from_lru(bo);
if (!list_empty(&bo->ddestroy)) {
list_del_init(&bo->ddestroy);
++put_count;
}
- if (bo->mem.mm_node) {
- drm_mm_put_block(bo->mem.mm_node);
- bo->mem.mm_node = NULL;
- }
- spin_unlock(&glob->lru_lock);
- atomic_set(&bo->reserved, 0);
+ ttm_bo_cleanup_memtype_use(bo);
while (put_count--)
kref_put(&bo->list_kref, ttm_bo_ref_bug);
return 0;
}
-
+requeue:
spin_lock(&glob->lru_lock);
if (list_empty(&bo->ddestroy)) {
void *sync_obj = bo->sync_obj;
INIT_LIST_HEAD(&fbo->lru);
INIT_LIST_HEAD(&fbo->swap);
fbo->vm_node = NULL;
+ atomic_set(&fbo->cpu_writers, 0);
fbo->sync_obj = driver->sync_obj_ref(bo->sync_obj);
kref_init(&fbo->list_kref);
spinlock_t lock;
bool fill_lock;
struct list_head list;
- int gfp_flags;
+ gfp_t gfp_flags;
unsigned npages;
char *name;
unsigned long nfrees;
* This function is reentrant if caller updates count depending on number of
* pages returned in pages array.
*/
-static int ttm_alloc_new_pages(struct list_head *pages, int gfp_flags,
+static int ttm_alloc_new_pages(struct list_head *pages, gfp_t gfp_flags,
int ttm_flags, enum ttm_caching_state cstate, unsigned count)
{
struct page **caching_array;
{
struct ttm_page_pool *pool = ttm_get_pool(flags, cstate);
struct page *p = NULL;
- int gfp_flags = GFP_USER;
+ gfp_t gfp_flags = GFP_USER;
int r;
/* set zero flag for page allocation if required */
return 0;
}
-void ttm_page_alloc_fini()
+void ttm_page_alloc_fini(void)
{
int i;
{0, 0, 0}
};
-static char *vmw_devname = "vmwgfx";
+static int enable_fbdev;
static int vmw_probe(struct pci_dev *, const struct pci_device_id *);
static void vmw_master_init(struct vmw_master *);
static int vmwgfx_pm_notifier(struct notifier_block *nb, unsigned long val,
void *ptr);
+MODULE_PARM_DESC(enable_fbdev, "Enable vmwgfx fbdev");
+module_param_named(enable_fbdev, enable_fbdev, int, 0600);
+
static void vmw_print_capabilities(uint32_t capabilities)
{
DRM_INFO("Capabilities:\n");
{
int ret;
- vmw_kms_save_vga(dev_priv);
-
ret = vmw_fifo_init(dev_priv, &dev_priv->fifo);
if (unlikely(ret != 0)) {
DRM_ERROR("Unable to initialize FIFO.\n");
static void vmw_release_device(struct vmw_private *dev_priv)
{
vmw_fifo_release(dev_priv, &dev_priv->fifo);
- vmw_kms_restore_vga(dev_priv);
}
+int vmw_3d_resource_inc(struct vmw_private *dev_priv)
+{
+ int ret = 0;
+
+ mutex_lock(&dev_priv->release_mutex);
+ if (unlikely(dev_priv->num_3d_resources++ == 0)) {
+ ret = vmw_request_device(dev_priv);
+ if (unlikely(ret != 0))
+ --dev_priv->num_3d_resources;
+ }
+ mutex_unlock(&dev_priv->release_mutex);
+ return ret;
+}
+
+
+void vmw_3d_resource_dec(struct vmw_private *dev_priv)
+{
+ int32_t n3d;
+
+ mutex_lock(&dev_priv->release_mutex);
+ if (unlikely(--dev_priv->num_3d_resources == 0))
+ vmw_release_device(dev_priv);
+ n3d = (int32_t) dev_priv->num_3d_resources;
+ mutex_unlock(&dev_priv->release_mutex);
+
+ BUG_ON(n3d < 0);
+}
static int vmw_driver_load(struct drm_device *dev, unsigned long chipset)
{
dev_priv->last_read_sequence = (uint32_t) -100;
mutex_init(&dev_priv->hw_mutex);
mutex_init(&dev_priv->cmdbuf_mutex);
+ mutex_init(&dev_priv->release_mutex);
rwlock_init(&dev_priv->resource_lock);
idr_init(&dev_priv->context_idr);
idr_init(&dev_priv->surface_idr);
dev_priv->vram_start = pci_resource_start(dev->pdev, 1);
dev_priv->mmio_start = pci_resource_start(dev->pdev, 2);
+ dev_priv->enable_fb = enable_fbdev;
+
mutex_lock(&dev_priv->hw_mutex);
vmw_write(dev_priv, SVGA_REG_ID, SVGA_ID_2);
dev->dev_private = dev_priv;
- if (!dev->devname)
- dev->devname = vmw_devname;
-
- if (dev_priv->capabilities & SVGA_CAP_IRQMASK) {
- ret = drm_irq_install(dev);
- if (unlikely(ret != 0)) {
- DRM_ERROR("Failed installing irq: %d\n", ret);
- goto out_no_irq;
- }
- }
-
ret = pci_request_regions(dev->pdev, "vmwgfx probe");
dev_priv->stealth = (ret != 0);
if (dev_priv->stealth) {
goto out_no_device;
}
}
- ret = vmw_request_device(dev_priv);
+ ret = vmw_kms_init(dev_priv);
if (unlikely(ret != 0))
- goto out_no_device;
- vmw_kms_init(dev_priv);
+ goto out_no_kms;
vmw_overlay_init(dev_priv);
- vmw_fb_init(dev_priv);
+ if (dev_priv->enable_fb) {
+ ret = vmw_3d_resource_inc(dev_priv);
+ if (unlikely(ret != 0))
+ goto out_no_fifo;
+ vmw_kms_save_vga(dev_priv);
+ vmw_fb_init(dev_priv);
+ DRM_INFO("%s", vmw_fifo_have_3d(dev_priv) ?
+ "Detected device 3D availability.\n" :
+ "Detected no device 3D availability.\n");
+ } else {
+ DRM_INFO("Delayed 3D detection since we're not "
+ "running the device in SVGA mode yet.\n");
+ }
+
+ if (dev_priv->capabilities & SVGA_CAP_IRQMASK) {
+ ret = drm_irq_install(dev);
+ if (unlikely(ret != 0)) {
+ DRM_ERROR("Failed installing irq: %d\n", ret);
+ goto out_no_irq;
+ }
+ }
dev_priv->pm_nb.notifier_call = vmwgfx_pm_notifier;
register_pm_notifier(&dev_priv->pm_nb);
- DRM_INFO("%s", vmw_fifo_have_3d(dev_priv) ? "Have 3D\n" : "No 3D\n");
-
return 0;
-out_no_device:
- if (dev_priv->capabilities & SVGA_CAP_IRQMASK)
- drm_irq_uninstall(dev_priv->dev);
- if (dev->devname == vmw_devname)
- dev->devname = NULL;
out_no_irq:
+ if (dev_priv->enable_fb) {
+ vmw_fb_close(dev_priv);
+ vmw_kms_restore_vga(dev_priv);
+ vmw_3d_resource_dec(dev_priv);
+ }
+out_no_fifo:
+ vmw_overlay_close(dev_priv);
+ vmw_kms_close(dev_priv);
+out_no_kms:
+ if (dev_priv->stealth)
+ pci_release_region(dev->pdev, 2);
+ else
+ pci_release_regions(dev->pdev);
+out_no_device:
ttm_object_device_release(&dev_priv->tdev);
out_err4:
iounmap(dev_priv->mmio_virt);
unregister_pm_notifier(&dev_priv->pm_nb);
- vmw_fb_close(dev_priv);
+ if (dev_priv->capabilities & SVGA_CAP_IRQMASK)
+ drm_irq_uninstall(dev_priv->dev);
+ if (dev_priv->enable_fb) {
+ vmw_fb_close(dev_priv);
+ vmw_kms_restore_vga(dev_priv);
+ vmw_3d_resource_dec(dev_priv);
+ }
vmw_kms_close(dev_priv);
vmw_overlay_close(dev_priv);
- vmw_release_device(dev_priv);
if (dev_priv->stealth)
pci_release_region(dev->pdev, 2);
else
pci_release_regions(dev->pdev);
- if (dev_priv->capabilities & SVGA_CAP_IRQMASK)
- drm_irq_uninstall(dev_priv->dev);
- if (dev->devname == vmw_devname)
- dev->devname = NULL;
ttm_object_device_release(&dev_priv->tdev);
iounmap(dev_priv->mmio_virt);
drm_mtrr_del(dev_priv->mmio_mtrr, dev_priv->mmio_start,
struct drm_ioctl_desc *ioctl =
&vmw_ioctls[nr - DRM_COMMAND_BASE];
- if (unlikely(ioctl->cmd != cmd)) {
+ if (unlikely(ioctl->cmd_drv != cmd)) {
DRM_ERROR("Invalid command format, ioctl %d\n",
nr - DRM_COMMAND_BASE);
return -EINVAL;
struct vmw_master *vmaster = vmw_master(file_priv->master);
int ret = 0;
+ if (!dev_priv->enable_fb) {
+ ret = vmw_3d_resource_inc(dev_priv);
+ if (unlikely(ret != 0))
+ return ret;
+ vmw_kms_save_vga(dev_priv);
+ mutex_lock(&dev_priv->hw_mutex);
+ vmw_write(dev_priv, SVGA_REG_TRACES, 0);
+ mutex_unlock(&dev_priv->hw_mutex);
+ }
+
if (active) {
BUG_ON(active != &dev_priv->fbdev_master);
ret = ttm_vt_lock(&active->lock, false, vmw_fp->tfile);
return 0;
out_no_active_lock:
- vmw_release_device(dev_priv);
+ if (!dev_priv->enable_fb) {
+ mutex_lock(&dev_priv->hw_mutex);
+ vmw_write(dev_priv, SVGA_REG_TRACES, 1);
+ mutex_unlock(&dev_priv->hw_mutex);
+ vmw_kms_restore_vga(dev_priv);
+ vmw_3d_resource_dec(dev_priv);
+ }
return ret;
}
ttm_lock_set_kill(&vmaster->lock, true, SIGTERM);
+ if (!dev_priv->enable_fb) {
+ ret = ttm_bo_evict_mm(&dev_priv->bdev, TTM_PL_VRAM);
+ if (unlikely(ret != 0))
+ DRM_ERROR("Unable to clean VRAM on master drop.\n");
+ mutex_lock(&dev_priv->hw_mutex);
+ vmw_write(dev_priv, SVGA_REG_TRACES, 1);
+ mutex_unlock(&dev_priv->hw_mutex);
+ vmw_kms_restore_vga(dev_priv);
+ vmw_3d_resource_dec(dev_priv);
+ }
+
dev_priv->active_master = &dev_priv->fbdev_master;
ttm_lock_set_kill(&dev_priv->fbdev_master.lock, false, SIGTERM);
ttm_vt_unlock(&dev_priv->fbdev_master.lock);
- vmw_fb_on(dev_priv);
+ if (dev_priv->enable_fb)
+ vmw_fb_on(dev_priv);
}
.irq_postinstall = vmw_irq_postinstall,
.irq_uninstall = vmw_irq_uninstall,
.irq_handler = vmw_irq_handler,
+ .get_vblank_counter = vmw_get_vblank_counter,
.reclaim_buffers_locked = NULL,
.get_map_ofs = drm_core_get_map_ofs,
.get_reg_ofs = drm_core_get_reg_ofs,
bool stealth;
bool is_opened;
+ bool enable_fb;
/**
* Master management.
struct vmw_master *active_master;
struct vmw_master fbdev_master;
struct notifier_block pm_nb;
+
+ struct mutex release_mutex;
+ uint32_t num_3d_resources;
};
static inline struct vmw_private *vmw_priv(struct drm_device *dev)
return val;
}
+int vmw_3d_resource_inc(struct vmw_private *dev_priv);
+void vmw_3d_resource_dec(struct vmw_private *dev_priv);
+
/**
* GMR utilities - vmwgfx_gmr.c
*/
unsigned bbp, unsigned depth);
int vmw_kms_update_layout_ioctl(struct drm_device *dev, void *data,
struct drm_file *file_priv);
+u32 vmw_get_vblank_counter(struct drm_device *dev, int crtc);
/**
* Overlay control - vmwgfx_overlay.c
if (unlikely(ret != 0))
goto err_unlock;
+ if (bo->mem.mem_type == TTM_PL_VRAM &&
+ bo->mem.mm_node->start < bo->num_pages)
+ (void) ttm_bo_validate(bo, &vmw_sys_placement, false,
+ false, false);
+
ret = ttm_bo_validate(bo, &ne_placement, false, false, false);
/* Could probably bug on */
mutex_lock(&dev_priv->hw_mutex);
dev_priv->enable_state = vmw_read(dev_priv, SVGA_REG_ENABLE);
dev_priv->config_done_state = vmw_read(dev_priv, SVGA_REG_CONFIG_DONE);
+ dev_priv->traces_state = vmw_read(dev_priv, SVGA_REG_TRACES);
vmw_write(dev_priv, SVGA_REG_ENABLE, 1);
min = 4;
dev_priv->config_done_state);
vmw_write(dev_priv, SVGA_REG_ENABLE,
dev_priv->enable_state);
+ vmw_write(dev_priv, SVGA_REG_TRACES,
+ dev_priv->traces_state);
mutex_unlock(&dev_priv->hw_mutex);
vmw_fence_queue_takedown(&fifo->fence_queue);
save->width = vmw_read(vmw_priv, SVGA_REG_DISPLAY_WIDTH);
save->height = vmw_read(vmw_priv, SVGA_REG_DISPLAY_HEIGHT);
vmw_write(vmw_priv, SVGA_REG_DISPLAY_ID, SVGA_ID_INVALID);
+ if (i == 0 && vmw_priv->num_displays == 1 &&
+ save->width == 0 && save->height == 0) {
+
+ /*
+ * It should be fairly safe to assume that these
+ * values are uninitialized.
+ */
+
+ save->width = vmw_priv->vga_width - save->pos_x;
+ save->height = vmw_priv->vga_height - save->pos_y;
+ }
}
+
return 0;
}
ttm_read_unlock(&vmaster->lock);
return ret;
}
+
+u32 vmw_get_vblank_counter(struct drm_device *dev, int crtc)
+{
+ return 0;
+}
#include "vmwgfx_kms.h"
+#define VMWGFX_LDU_NUM_DU 8
+
#define vmw_crtc_to_ldu(x) \
container_of(x, struct vmw_legacy_display_unit, base.crtc)
#define vmw_encoder_to_ldu(x) \
int vmw_kms_init_legacy_display_system(struct vmw_private *dev_priv)
{
+ struct drm_device *dev = dev_priv->dev;
+ int i;
+ int ret;
+
if (dev_priv->ldu_priv) {
DRM_INFO("ldu system already on\n");
return -EINVAL;
drm_mode_create_dirty_info_property(dev_priv->dev);
- vmw_ldu_init(dev_priv, 0);
- /* for old hardware without multimon only enable one display */
if (dev_priv->capabilities & SVGA_CAP_MULTIMON) {
- vmw_ldu_init(dev_priv, 1);
- vmw_ldu_init(dev_priv, 2);
- vmw_ldu_init(dev_priv, 3);
- vmw_ldu_init(dev_priv, 4);
- vmw_ldu_init(dev_priv, 5);
- vmw_ldu_init(dev_priv, 6);
- vmw_ldu_init(dev_priv, 7);
+ for (i = 0; i < VMWGFX_LDU_NUM_DU; ++i)
+ vmw_ldu_init(dev_priv, i);
+ ret = drm_vblank_init(dev, VMWGFX_LDU_NUM_DU);
+ } else {
+ /* for old hardware without multimon only enable one display */
+ vmw_ldu_init(dev_priv, 0);
+ ret = drm_vblank_init(dev, 1);
}
- return 0;
+ return ret;
}
int vmw_kms_close_legacy_display_system(struct vmw_private *dev_priv)
{
+ struct drm_device *dev = dev_priv->dev;
+
+ drm_vblank_cleanup(dev);
if (!dev_priv->ldu_priv)
return -ENOSYS;
cmd->body.cid = cpu_to_le32(res->id);
vmw_fifo_commit(dev_priv, sizeof(*cmd));
+ vmw_3d_resource_dec(dev_priv);
}
static int vmw_context_init(struct vmw_private *dev_priv,
cmd->body.cid = cpu_to_le32(res->id);
vmw_fifo_commit(dev_priv, sizeof(*cmd));
+ (void) vmw_3d_resource_inc(dev_priv);
vmw_resource_activate(res, vmw_hw_context_destroy);
return 0;
}
cmd->body.sid = cpu_to_le32(res->id);
vmw_fifo_commit(dev_priv, sizeof(*cmd));
+ vmw_3d_resource_dec(dev_priv);
}
void vmw_surface_res_free(struct vmw_resource *res)
}
vmw_fifo_commit(dev_priv, submit_size);
+ (void) vmw_3d_resource_inc(dev_priv);
vmw_resource_activate(res, vmw_hw_surface_destroy);
return 0;
}
pr_debug("vgaarb: decoding count now is: %d\n", vga_decode_count);
}
-void __vga_set_legacy_decoding(struct pci_dev *pdev, unsigned int decodes, bool userspace)
+static void __vga_set_legacy_decoding(struct pci_dev *pdev, unsigned int decodes, bool userspace)
{
struct vga_device *vgadev;
unsigned long flags;
USB_DEVICE_ID_CANDO_MULTI_TOUCH) },
{ HID_USB_DEVICE(USB_VENDOR_ID_CANDO,
USB_DEVICE_ID_CANDO_MULTI_TOUCH_11_6) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_CANDO,
+ USB_DEVICE_ID_CANDO_MULTI_TOUCH_15_6) },
{ }
};
MODULE_DEVICE_TABLE(hid, cando_devices);
{ HID_USB_DEVICE(USB_VENDOR_ID_BTC, USB_DEVICE_ID_BTC_EMPREX_REMOTE_2) },
{ HID_USB_DEVICE(USB_VENDOR_ID_CANDO, USB_DEVICE_ID_CANDO_MULTI_TOUCH) },
{ HID_USB_DEVICE(USB_VENDOR_ID_CANDO, USB_DEVICE_ID_CANDO_MULTI_TOUCH_11_6) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_CANDO, USB_DEVICE_ID_CANDO_MULTI_TOUCH_15_6) },
{ HID_USB_DEVICE(USB_VENDOR_ID_CHERRY, USB_DEVICE_ID_CHERRY_CYMOTION) },
{ HID_USB_DEVICE(USB_VENDOR_ID_CHERRY, USB_DEVICE_ID_CHERRY_CYMOTION_SOLAR) },
{ HID_USB_DEVICE(USB_VENDOR_ID_CHICONY, USB_DEVICE_ID_CHICONY_TACTICAL_PAD) },
#define USB_VENDOR_ID_CANDO 0x2087
#define USB_DEVICE_ID_CANDO_MULTI_TOUCH 0x0a01
#define USB_DEVICE_ID_CANDO_MULTI_TOUCH_11_6 0x0b03
+#define USB_DEVICE_ID_CANDO_MULTI_TOUCH_15_6 0x0f01
#define USB_VENDOR_ID_CH 0x068e
#define USB_DEVICE_ID_CH_PRO_PEDALS 0x00f2
#define USB_VENDOR_ID_TURBOX 0x062a
#define USB_DEVICE_ID_TURBOX_KEYBOARD 0x0201
+#define USB_DEVICE_ID_TURBOX_TOUCHSCREEN_MOSART 0x7100
#define USB_VENDOR_ID_TWINHAN 0x6253
#define USB_DEVICE_ID_TWINHAN_IR_REMOTE 0x0100
int ret = 0;
mutex_lock(&minors_lock);
+
+ if (!hidraw_table[minor]) {
+ ret = -ENODEV;
+ goto out;
+ }
+
dev = hidraw_table[minor]->hid;
if (!dev->hid_output_raw_report) {
mutex_lock(&minors_lock);
dev = hidraw_table[minor];
+ if (!dev) {
+ ret = -ENODEV;
+ goto out;
+ }
switch (cmd) {
case HIDIOCGRDESCSIZE:
ret = -ENOTTY;
}
+out:
mutex_unlock(&minors_lock);
return ret;
}
{ USB_VENDOR_ID_DWAV, USB_DEVICE_ID_EGALAX_TOUCHCONTROLLER, HID_QUIRK_MULTI_INPUT | HID_QUIRK_NOGET },
{ USB_VENDOR_ID_DWAV, USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH, HID_QUIRK_MULTI_INPUT },
{ USB_VENDOR_ID_MOJO, USB_DEVICE_ID_RETRO_ADAPTER, HID_QUIRK_MULTI_INPUT },
+ { USB_VENDOR_ID_TURBOX, USB_DEVICE_ID_TURBOX_TOUCHSCREEN_MOSART, HID_QUIRK_MULTI_INPUT },
{ USB_VENDOR_ID_HAPP, USB_DEVICE_ID_UGCI_DRIVING, HID_QUIRK_BADPAD | HID_QUIRK_MULTI_INPUT },
{ USB_VENDOR_ID_HAPP, USB_DEVICE_ID_UGCI_FLYING, HID_QUIRK_BADPAD | HID_QUIRK_MULTI_INPUT },
{ USB_VENDOR_ID_HAPP, USB_DEVICE_ID_UGCI_FIGHTING, HID_QUIRK_BADPAD | HID_QUIRK_MULTI_INPUT },
config SENSORS_PKGTEMP
tristate "Intel processor package temperature sensor"
- depends on X86 && PCI && EXPERIMENTAL
+ depends on X86 && EXPERIMENTAL
help
If you say yes here you get support for the package level temperature
sensor inside your CPU. Check documentation/driver for details.
#include <linux/pci.h>
#include <asm/msr.h>
#include <asm/processor.h>
+#include <asm/smp.h>
#define DRVNAME "coretemp"
int err;
struct platform_device *pdev;
struct pdev_entry *pdev_entry;
-#ifdef CONFIG_SMP
struct cpuinfo_x86 *c = &cpu_data(cpu);
-#endif
+
+ /*
+ * CPUID.06H.EAX[0] indicates whether the CPU has thermal
+ * sensors. We check this bit only, all the early CPUs
+ * without thermal sensors will be filtered out.
+ */
+ if (!cpu_has(c, X86_FEATURE_DTS)) {
+ printk(KERN_INFO DRVNAME ": CPU (model=0x%x)"
+ " has no thermal sensor.\n", c->x86_model);
+ return 0;
+ }
mutex_lock(&pdev_list_mutex);
static void coretemp_device_remove(unsigned int cpu)
{
- struct pdev_entry *p, *n;
+ struct pdev_entry *p;
+ unsigned int i;
+
mutex_lock(&pdev_list_mutex);
- list_for_each_entry_safe(p, n, &pdev_list, list) {
- if (p->cpu == cpu) {
- platform_device_unregister(p->pdev);
- list_del(&p->list);
- kfree(p);
- }
+ list_for_each_entry(p, &pdev_list, list) {
+ if (p->cpu != cpu)
+ continue;
+
+ platform_device_unregister(p->pdev);
+ list_del(&p->list);
+ mutex_unlock(&pdev_list_mutex);
+ kfree(p);
+ for_each_cpu(i, cpu_sibling_mask(cpu))
+ if (i != cpu && !coretemp_device_add(i))
+ break;
+ return;
}
mutex_unlock(&pdev_list_mutex);
}
if (err)
goto exit;
- for_each_online_cpu(i) {
- struct cpuinfo_x86 *c = &cpu_data(i);
- /*
- * CPUID.06H.EAX[0] indicates whether the CPU has thermal
- * sensors. We check this bit only, all the early CPUs
- * without thermal sensors will be filtered out.
- */
- if (c->cpuid_level >= 6 && (cpuid_eax(0x06) & 0x01))
- coretemp_device_add(i);
- else {
- printk(KERN_INFO DRVNAME ": CPU (model=0x%x)"
- " has no thermal sensor.\n", c->x86_model);
- }
- }
+ for_each_online_cpu(i)
+ coretemp_device_add(i);
+
+#ifndef CONFIG_HOTPLUG_CPU
if (list_empty(&pdev_list)) {
err = -ENODEV;
goto exit_driver_unreg;
}
+#endif
register_hotcpu_notifier(&coretemp_cpu_notifier);
return 0;
-exit_driver_unreg:
#ifndef CONFIG_HOTPLUG_CPU
+exit_driver_unreg:
platform_driver_unregister(&coretemp_driver);
#endif
exit:
/* Super-I/O Function prototypes */
static inline int superio_inb(int base, int reg);
static inline int superio_inw(int base, int reg);
-static inline void superio_enter(int base);
+static inline int superio_enter(int base);
static inline void superio_select(int base, int ld);
static inline void superio_exit(int base);
return val;
}
-static inline void superio_enter(int base)
+static inline int superio_enter(int base)
{
+ /* Don't step on other drivers' I/O space by accident */
+ if (!request_muxed_region(base, 2, DRVNAME)) {
+ printk(KERN_ERR DRVNAME ": I/O address 0x%04x already in use\n",
+ base);
+ return -EBUSY;
+ }
+
/* according to the datasheet the key must be send twice! */
outb(SIO_UNLOCK_KEY, base);
outb(SIO_UNLOCK_KEY, base);
+
+ return 0;
}
static inline void superio_select(int base, int ld)
static inline void superio_exit(int base)
{
outb(SIO_LOCK_KEY, base);
+ release_region(base, 2);
}
static inline int fan_from_reg(u16 reg)
static int __init f71882fg_find(int sioaddr, unsigned short *address,
struct f71882fg_sio_data *sio_data)
{
- int err = -ENODEV;
u16 devid;
-
- /* Don't step on other drivers' I/O space by accident */
- if (!request_region(sioaddr, 2, DRVNAME)) {
- printk(KERN_ERR DRVNAME ": I/O address 0x%04x already in use\n",
- (int)sioaddr);
- return -EBUSY;
- }
-
- superio_enter(sioaddr);
+ int err = superio_enter(sioaddr);
+ if (err)
+ return err;
devid = superio_inw(sioaddr, SIO_REG_MANID);
if (devid != SIO_FINTEK_ID) {
pr_debug(DRVNAME ": Not a Fintek device\n");
+ err = -ENODEV;
goto exit;
}
default:
printk(KERN_INFO DRVNAME ": Unsupported Fintek device: %04x\n",
(unsigned int)devid);
+ err = -ENODEV;
goto exit;
}
if (!(superio_inb(sioaddr, SIO_REG_ENABLE) & 0x01)) {
printk(KERN_WARNING DRVNAME ": Device not activated\n");
+ err = -ENODEV;
goto exit;
}
*address = superio_inw(sioaddr, SIO_REG_ADDR);
if (*address == 0) {
printk(KERN_WARNING DRVNAME ": Base address not set\n");
+ err = -ENODEV;
goto exit;
}
*address &= ~(REGION_LENGTH - 1); /* Ignore 3 LSB */
(int)superio_inb(sioaddr, SIO_REG_DEVREV));
exit:
superio_exit(sioaddr);
- release_region(sioaddr, 2);
return err;
}
wake_up_interruptible(&lis3_dev.misc_wait);
kill_fasync(&lis3_dev.async_queue, SIGIO, POLL_IN);
out:
- if (lis3_dev.whoami == WAI_8B && lis3_dev.idev &&
+ if (lis3_dev.pdata && lis3_dev.whoami == WAI_8B && lis3_dev.idev &&
lis3_dev.idev->input->users)
return IRQ_WAKE_THREAD;
return IRQ_HANDLED;
* io-apic is not configurable (and generates a warning) but I keep it
* in case of support for other hardware.
*/
- if (dev->whoami == WAI_8B)
+ if (dev->pdata && dev->whoami == WAI_8B)
thread_fn = lis302dl_interrupt_thread1_8b;
else
thread_fn = NULL;
#include <linux/list.h>
#include <linux/platform_device.h>
#include <linux/cpu.h>
-#include <linux/pci.h>
#include <asm/msr.h>
#include <asm/processor.h>
err = sysfs_create_group(&pdev->dev.kobj, &pkgtemp_group);
if (err)
- goto exit_free;
+ goto exit_dev;
data->hwmon_dev = hwmon_device_register(&pdev->dev);
if (IS_ERR(data->hwmon_dev)) {
exit_class:
sysfs_remove_group(&pdev->dev.kobj, &pkgtemp_group);
+exit_dev:
+ device_remove_file(&pdev->dev, &sensor_dev_attr_temp1_max.dev_attr);
exit_free:
kfree(data);
exit:
hwmon_device_unregister(data->hwmon_dev);
sysfs_remove_group(&pdev->dev.kobj, &pkgtemp_group);
+ device_remove_file(&pdev->dev, &sensor_dev_attr_temp1_max.dev_attr);
platform_set_drvdata(pdev, NULL);
kfree(data);
return 0;
int err;
struct platform_device *pdev;
struct pdev_entry *pdev_entry;
-#ifdef CONFIG_SMP
struct cpuinfo_x86 *c = &cpu_data(cpu);
-#endif
+
+ if (!cpu_has(c, X86_FEATURE_PTS))
+ return 0;
mutex_lock(&pdev_list_mutex);
#ifdef CONFIG_HOTPLUG_CPU
static void pkgtemp_device_remove(unsigned int cpu)
{
- struct pdev_entry *p, *n;
+ struct pdev_entry *p;
unsigned int i;
int err;
mutex_lock(&pdev_list_mutex);
- list_for_each_entry_safe(p, n, &pdev_list, list) {
+ list_for_each_entry(p, &pdev_list, list) {
if (p->cpu != cpu)
continue;
platform_device_unregister(p->pdev);
list_del(&p->list);
+ mutex_unlock(&pdev_list_mutex);
kfree(p);
for_each_cpu(i, cpu_core_mask(cpu)) {
if (i != cpu) {
break;
}
}
- break;
+ return;
}
mutex_unlock(&pdev_list_mutex);
}
goto exit;
for_each_online_cpu(i) {
- struct cpuinfo_x86 *c = &cpu_data(i);
-
- if (!cpu_has(c, X86_FEATURE_PTS))
- continue;
-
err = pkgtemp_device_add(i);
if (err)
goto exit_devices_unreg;
dev_dbg(&ofdev->dev, "hw routines for %s registered.\n",
cpm->adap.name);
+ /*
+ * register OF I2C devices
+ */
+ of_i2c_register_devices(&cpm->adap);
+
return 0;
out_shut:
cpm_i2c_shutdown(cpm);
INIT_COMPLETION(dev->cmd_complete);
dev->cmd_err = 0;
- /* Take I2C out of reset, configure it as master and set the
- * start bit */
- flag = DAVINCI_I2C_MDR_IRS | DAVINCI_I2C_MDR_MST | DAVINCI_I2C_MDR_STT;
+ /* Take I2C out of reset and configure it as master */
+ flag = DAVINCI_I2C_MDR_IRS | DAVINCI_I2C_MDR_MST;
/* if the slave address is ten bit address, enable XA bit */
if (msg->flags & I2C_M_TEN)
flag |= DAVINCI_I2C_MDR_XA;
if (!(msg->flags & I2C_M_RD))
flag |= DAVINCI_I2C_MDR_TRX;
- if (stop)
- flag |= DAVINCI_I2C_MDR_STP;
- if (msg->len == 0) {
+ if (msg->len == 0)
flag |= DAVINCI_I2C_MDR_RM;
- flag &= ~DAVINCI_I2C_MDR_STP;
- }
/* Enable receive or transmit interrupts */
w = davinci_i2c_read_reg(dev, DAVINCI_I2C_IMR_REG);
dev->terminate = 0;
- /* write the data into mode register */
+ /*
+ * Write mode register first as needed for correct behaviour
+ * on OMAP-L138, but don't set STT yet to avoid a race with XRDY
+ * occuring before we have loaded DXR
+ */
davinci_i2c_write_reg(dev, DAVINCI_I2C_MDR_REG, flag);
/*
* because transmit-data-ready interrupt can come before
* NACK-interrupt during sending of previous message and
* ICDXR may have wrong data
+ * It also saves us one interrupt, slightly faster
*/
if ((!(msg->flags & I2C_M_RD)) && dev->buf_len) {
davinci_i2c_write_reg(dev, DAVINCI_I2C_DXR_REG, *dev->buf++);
dev->buf_len--;
}
+ /* Set STT to begin transmit now DXR is loaded */
+ flag |= DAVINCI_I2C_MDR_STT;
+ if (stop && msg->len != 0)
+ flag |= DAVINCI_I2C_MDR_STP;
+ davinci_i2c_write_reg(dev, DAVINCI_I2C_MDR_REG, flag);
+
r = wait_for_completion_interruptible_timeout(&dev->cmd_complete,
dev->adapter.timeout);
if (r == 0) {
dev_info(&ofdev->dev, "using %s mode\n",
dev->fast_mode ? "fast (400 kHz)" : "standard (100 kHz)");
+ /* Now register all the child nodes */
+ of_i2c_register_devices(adap);
+
return 0;
error_cleanup:
static int i2c_imx_trx_complete(struct imx_i2c_struct *i2c_imx)
{
- int result;
-
- result = wait_event_interruptible_timeout(i2c_imx->queue,
- i2c_imx->i2csr & I2SR_IIF, HZ / 10);
+ wait_event_timeout(i2c_imx->queue, i2c_imx->i2csr & I2SR_IIF, HZ / 10);
- if (unlikely(result < 0)) {
- dev_dbg(&i2c_imx->adapter.dev, "<%s> result < 0\n", __func__);
- return result;
- } else if (unlikely(!(i2c_imx->i2csr & I2SR_IIF))) {
+ if (unlikely(!(i2c_imx->i2csr & I2SR_IIF))) {
dev_dbg(&i2c_imx->adapter.dev, "<%s> Timeout\n", __func__);
return -ETIMEDOUT;
}
i2c_imx->i2csr = temp;
temp &= ~I2SR_IIF;
writeb(temp, i2c_imx->base + IMX_I2C_I2SR);
- wake_up_interruptible(&i2c_imx->queue);
+ wake_up(&i2c_imx->queue);
return IRQ_HANDLED;
}
dev_err(i2c->dev, "failed to add adapter\n");
goto fail_add;
}
+ of_i2c_register_devices(&i2c->adap);
return result;
return result;
} else if (result == 0) {
dev_dbg(i2c->dev, "%s: timeout\n", __func__);
- result = -ETIMEDOUT;
+ return -ETIMEDOUT;
}
return 0;
if (r == 0)
r = num;
+
+ omap_i2c_wait_for_bb(dev);
out:
omap_i2c_idle(dev);
return r;
static int pca_isa_waitforcompletion(void *pd)
{
- long ret = ~0;
unsigned long timeout;
+ long ret;
if (irq > -1) {
ret = wait_event_timeout(pca_wait,
} else {
/* Do polling */
timeout = jiffies + pca_isa_ops.timeout;
- while (((pca_isa_readbyte(pd, I2C_PCA_CON)
- & I2C_PCA_CON_SI) == 0)
- && (ret = time_before(jiffies, timeout)))
+ do {
+ ret = time_before(jiffies, timeout);
+ if (pca_isa_readbyte(pd, I2C_PCA_CON)
+ & I2C_PCA_CON_SI)
+ break;
udelay(100);
+ } while (ret);
}
+
return ret > 0;
}
static int i2c_pca_pf_waitforcompletion(void *pd)
{
struct i2c_pca_pf_data *i2c = pd;
- long ret = ~0;
unsigned long timeout;
+ long ret;
if (i2c->irq) {
ret = wait_event_timeout(i2c->wait,
} else {
/* Do polling */
timeout = jiffies + i2c->adap.timeout;
- while (((i2c->algo_data.read_byte(i2c, I2C_PCA_CON)
- & I2C_PCA_CON_SI) == 0)
- && (ret = time_before(jiffies, timeout)))
+ do {
+ ret = time_before(jiffies, timeout);
+ if (i2c->algo_data.read_byte(i2c, I2C_PCA_CON)
+ & I2C_PCA_CON_SI)
+ break;
udelay(100);
+ } while (ret);
}
return ret > 0;
unsigned long sda_delay;
if (pdata->sda_delay) {
- sda_delay = (freq / 1000) * pdata->sda_delay;
- sda_delay /= 1000000;
+ sda_delay = clkin * pdata->sda_delay;
+ sda_delay = DIV_ROUND_UP(sda_delay, 1000000);
sda_delay = DIV_ROUND_UP(sda_delay, 5);
if (sda_delay > 3)
sda_delay = 3;
#include <linux/init.h>
#include <linux/idr.h>
#include <linux/mutex.h>
-#include <linux/of_i2c.h>
#include <linux/of_device.h>
#include <linux/completion.h>
#include <linux/hardirq.h>
{
const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
- if (pm_runtime_suspended(dev))
- return 0;
-
- if (pm)
- return pm->suspend ? pm->suspend(dev) : 0;
+ if (pm) {
+ if (pm_runtime_suspended(dev))
+ return 0;
+ else
+ return pm->suspend ? pm->suspend(dev) : 0;
+ }
return i2c_legacy_suspend(dev, PMSG_SUSPEND);
}
else
ret = i2c_legacy_resume(dev);
- if (!ret) {
- pm_runtime_disable(dev);
- pm_runtime_set_active(dev);
- pm_runtime_enable(dev);
- }
-
return ret;
}
{
const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
- if (pm_runtime_suspended(dev))
- return 0;
-
- if (pm)
- return pm->freeze ? pm->freeze(dev) : 0;
+ if (pm) {
+ if (pm_runtime_suspended(dev))
+ return 0;
+ else
+ return pm->freeze ? pm->freeze(dev) : 0;
+ }
return i2c_legacy_suspend(dev, PMSG_FREEZE);
}
{
const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
- if (pm_runtime_suspended(dev))
- return 0;
-
- if (pm)
- return pm->thaw ? pm->thaw(dev) : 0;
+ if (pm) {
+ if (pm_runtime_suspended(dev))
+ return 0;
+ else
+ return pm->thaw ? pm->thaw(dev) : 0;
+ }
return i2c_legacy_resume(dev);
}
{
const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
- if (pm_runtime_suspended(dev))
- return 0;
-
- if (pm)
- return pm->poweroff ? pm->poweroff(dev) : 0;
+ if (pm) {
+ if (pm_runtime_suspended(dev))
+ return 0;
+ else
+ return pm->poweroff ? pm->poweroff(dev) : 0;
+ }
return i2c_legacy_suspend(dev, PMSG_HIBERNATE);
}
if (adap->nr < __i2c_first_dynamic_bus_num)
i2c_scan_static_board_info(adap);
- /* Register devices from the device tree */
- of_i2c_register_devices(adap);
-
/* Notify drivers */
mutex_lock(&core_lock);
bus_for_each_drv(&i2c_bus_type, NULL, adap, __process_new_adapter);
/* Reliable LAPIC Timer States, bit 1 for C1 etc. */
static unsigned int lapic_timer_reliable_states;
-static struct cpuidle_device *intel_idle_cpuidle_devices;
+static struct cpuidle_device __percpu *intel_idle_cpuidle_devices;
static int intel_idle(struct cpuidle_device *dev, struct cpuidle_state *state);
static struct cpuidle_state *cpuidle_state_table;
.name = "NHM-C3",
.desc = "MWAIT 0x10",
.driver_data = (void *) 0x10,
- .flags = CPUIDLE_FLAG_TIME_VALID,
+ .flags = CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_TLB_FLUSHED,
.exit_latency = 20,
.power_usage = 500,
.target_residency = 80,
.name = "NHM-C6",
.desc = "MWAIT 0x20",
.driver_data = (void *) 0x20,
- .flags = CPUIDLE_FLAG_TIME_VALID,
+ .flags = CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_TLB_FLUSHED,
.exit_latency = 200,
.power_usage = 350,
.target_residency = 800,
.name = "ATM-C4",
.desc = "MWAIT 0x30",
.driver_data = (void *) 0x30,
- .flags = CPUIDLE_FLAG_TIME_VALID,
+ .flags = CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_TLB_FLUSHED,
.exit_latency = 100,
.power_usage = 250,
.target_residency = 400,
{ /* MWAIT C5 */ },
{ /* MWAIT C6 */
.name = "ATM-C6",
- .desc = "MWAIT 0x40",
- .driver_data = (void *) 0x40,
- .flags = CPUIDLE_FLAG_TIME_VALID,
- .exit_latency = 200,
+ .desc = "MWAIT 0x52",
+ .driver_data = (void *) 0x52,
+ .flags = CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_TLB_FLUSHED,
+ .exit_latency = 140,
.power_usage = 150,
- .target_residency = 800,
- .enter = NULL }, /* disabled */
+ .target_residency = 560,
+ .enter = &intel_idle },
};
/**
local_irq_disable();
+ /*
+ * If the state flag indicates that the TLB will be flushed or if this
+ * is the deepest c-state supported, do a voluntary leave mm to avoid
+ * costly and mostly unnecessary wakeups for flushing the user TLB's
+ * associated with the active mm.
+ */
+ if (state->flags & CPUIDLE_FLAG_TLB_FLUSHED ||
+ (&dev->states[dev->state_count - 1] == state))
+ leave_mm(cpu);
+
if (!(lapic_timer_reliable_states & (1 << (cstate))))
clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ENTER, &cpu);
V_MSS_IDX(mtu_idx) |
V_L2T_IDX(ep->l2t->idx) | V_TX_CHANNEL(ep->l2t->smt_idx);
opt0l = V_TOS((ep->tos >> 2) & M_TOS) | V_RCV_BUFSIZ(rcv_win>>10);
- opt2 = V_FLAVORS_VALID(1) | V_CONG_CONTROL_FLAVOR(cong_flavor);
+ opt2 = F_RX_COALESCE_VALID | V_RX_COALESCE(0) | V_FLAVORS_VALID(1) |
+ V_CONG_CONTROL_FLAVOR(cong_flavor);
skb->priority = CPL_PRIORITY_SETUP;
set_arp_failure_handler(skb, act_open_req_arp_failure);
V_MSS_IDX(mtu_idx) |
V_L2T_IDX(ep->l2t->idx) | V_TX_CHANNEL(ep->l2t->smt_idx);
opt0l = V_TOS((ep->tos >> 2) & M_TOS) | V_RCV_BUFSIZ(rcv_win>>10);
- opt2 = V_FLAVORS_VALID(1) | V_CONG_CONTROL_FLAVOR(cong_flavor);
+ opt2 = F_RX_COALESCE_VALID | V_RX_COALESCE(0) | V_FLAVORS_VALID(1) |
+ V_CONG_CONTROL_FLAVOR(cong_flavor);
rpl = cplhdr(skb);
rpl->wr.wr_hi = htonl(V_WR_OP(FW_WROPCODE_FORWARD));
if ((_IOC_NR(cmd) & ~ABS_MAX) == _IOC_NR(EVIOCGABS(0))) {
+ if (!dev->absinfo)
+ return -EINVAL;
+
t = _IOC_NR(cmd) & ABS_MAX;
abs = dev->absinfo[t];
}
}
- if (_IOC_DIR(cmd) == _IOC_READ) {
+ if (_IOC_DIR(cmd) == _IOC_WRITE) {
if ((_IOC_NR(cmd) & ~ABS_MAX) == _IOC_NR(EVIOCSABS(0))) {
+ if (!dev->absinfo)
+ return -EINVAL;
+
t = _IOC_NR(cmd) & ABS_MAX;
if (copy_from_user(&abs, p, min_t(size_t,
memcpy(joydev->abspam, abspam, len);
+ for (i = 0; i < joydev->nabs; i++)
+ joydev->absmap[joydev->abspam[i]] = i;
+
out:
kfree(abspam);
return retval;
retval = uinput_validate_absbits(dev);
if (retval < 0)
goto exit;
+ if (test_bit(ABS_MT_SLOT, dev->absbit)) {
+ int nslot = input_abs_get_max(dev, ABS_MT_SLOT) + 1;
+ input_mt_create_slots(dev, nslot);
+ input_set_events_per_packet(dev, 6 * nslot);
+ } else if (test_bit(ABS_MT_POSITION_X, dev->absbit)) {
+ input_set_events_per_packet(dev, 60);
+ }
}
udev->state = UIST_SETUP_COMPLETE;
static int wacom_open(struct input_dev *dev)
{
struct wacom *wacom = input_get_drvdata(dev);
+ int retval = 0;
- mutex_lock(&wacom->lock);
-
- wacom->irq->dev = wacom->usbdev;
-
- if (usb_autopm_get_interface(wacom->intf) < 0) {
- mutex_unlock(&wacom->lock);
+ if (usb_autopm_get_interface(wacom->intf) < 0)
return -EIO;
- }
+
+ mutex_lock(&wacom->lock);
if (usb_submit_urb(wacom->irq, GFP_KERNEL)) {
- usb_autopm_put_interface(wacom->intf);
- mutex_unlock(&wacom->lock);
- return -EIO;
+ retval = -EIO;
+ goto out;
}
wacom->open = true;
wacom->intf->needs_remote_wakeup = 1;
+out:
mutex_unlock(&wacom->lock);
- return 0;
+ if (retval)
+ usb_autopm_put_interface(wacom->intf);
+ return retval;
}
static void wacom_close(struct input_dev *dev)
wacom->open = false;
wacom->intf->needs_remote_wakeup = 0;
mutex_unlock(&wacom->lock);
+
+ usb_autopm_put_interface(wacom->intf);
}
static int wacom_parse_hid(struct usb_interface *intf, struct hid_descriptor *hid_desc,
/* general pen packet */
if ((data[1] & 0xb8) == 0xa0) {
t = (data[6] << 2) | ((data[7] >> 6) & 3);
- if (features->type >= INTUOS4S && features->type <= INTUOS4L)
+ if ((features->type >= INTUOS4S && features->type <= INTUOS4L) ||
+ features->type == WACOM_21UX2) {
t = (t << 1) | (data[1] & 1);
+ }
input_report_abs(input, ABS_PRESSURE, t);
input_report_abs(input, ABS_TILT_X,
((data[7] << 1) & 0x7e) | (data[8] >> 7));
}
else if(callid>=0x0000 && callid<=0x7FFF)
{
+ int len;
+
pr_debug("%s: Got Incoming Call\n",
sc_adapter[card]->devicename);
- strcpy(setup.phone,&(rcvmsg.msg_data.byte_array[4]));
- strcpy(setup.eazmsn,
- sc_adapter[card]->channel[rcvmsg.phy_link_no-1].dn);
+ len = strlcpy(setup.phone, &(rcvmsg.msg_data.byte_array[4]),
+ sizeof(setup.phone));
+ if (len >= sizeof(setup.phone))
+ continue;
+ len = strlcpy(setup.eazmsn,
+ sc_adapter[card]->channel[rcvmsg.phy_link_no - 1].dn,
+ sizeof(setup.eazmsn));
+ if (len >= sizeof(setup.eazmsn))
+ continue;
setup.si1 = 7;
setup.si2 = 0;
setup.plan = 0;
* Handle a GetMyNumber Rsp
*/
if (IS_CE_MESSAGE(rcvmsg,Call,0,GetMyNumber)){
- strcpy(sc_adapter[card]->channel[rcvmsg.phy_link_no-1].dn,rcvmsg.msg_data.byte_array);
+ strlcpy(sc_adapter[card]->channel[rcvmsg.phy_link_no - 1].dn,
+ rcvmsg.msg_data.byte_array,
+ sizeof(rcvmsg.msg_data.byte_array));
continue;
}
int cmd_level;
int slow_level;
- read_lock(&led_dat->rw_lock);
+ read_lock_irq(&led_dat->rw_lock);
cmd_level = gpio_get_value(led_dat->cmd);
slow_level = gpio_get_value(led_dat->slow);
}
}
- read_unlock(&led_dat->rw_lock);
+ read_unlock_irq(&led_dat->rw_lock);
return ret;
}
enum ns2_led_modes mode)
{
int i;
+ unsigned long flags;
- write_lock(&led_dat->rw_lock);
+ write_lock_irqsave(&led_dat->rw_lock, flags);
for (i = 0; i < ARRAY_SIZE(ns2_led_modval); i++) {
if (mode == ns2_led_modval[i].mode) {
}
}
- write_unlock(&led_dat->rw_lock);
+ write_unlock_irqrestore(&led_dat->rw_lock, flags);
}
static void ns2_led_set(struct led_classdev *led_cdev,
page = bitmap->sb_page;
offset = sizeof(bitmap_super_t);
if (!file)
- read_sb_page(bitmap->mddev,
- bitmap->mddev->bitmap_info.offset,
- page,
- index, count);
+ page = read_sb_page(
+ bitmap->mddev,
+ bitmap->mddev->bitmap_info.offset,
+ page,
+ index, count);
} else if (file) {
page = read_page(file, index, bitmap, count);
offset = 0;
/* take from bio_init */
bio->bi_next = NULL;
+ bio->bi_flags &= ~(BIO_POOL_MASK-1);
bio->bi_flags |= 1 << BIO_UPTODATE;
+ bio->bi_comp_cpu = -1;
bio->bi_rw = READ;
bio->bi_vcnt = 0;
bio->bi_idx = 0;
!test_bit(MD_RECOVERY_REQUESTED, &mddev->recovery))
break;
BUG_ON(sync_blocks < (PAGE_SIZE>>9));
- if (len > (sync_blocks<<9))
+ if ((len >> 9) > sync_blocks)
len = sync_blocks<<9;
}
* a keyup event might follow immediately after the keydown.
*/
spin_lock_irqsave(&ir->keylock, flags);
- if (time_is_after_eq_jiffies(ir->keyup_jiffies))
+ if (time_is_before_eq_jiffies(ir->keyup_jiffies))
ir_keyup(ir);
spin_unlock_irqrestore(&ir->keylock, flags);
}
(ir_dev->props && ir_dev->props->driver_type == RC_DRIVER_IR_RAW) ?
" in raw mode" : "");
+ /*
+ * Default delay of 250ms is too short for some protocols, expecially
+ * since the timeout is currently set to 250ms. Increase it to 500ms,
+ * to avoid wrong repetition of the keycodes.
+ */
+ input_dev->rep[REP_DELAY] = 500;
+
return 0;
out_event:
features |= LIRC_CAN_SET_SEND_CARRIER;
if (ir_dev->props->s_tx_duty_cycle)
- features |= LIRC_CAN_SET_REC_DUTY_CYCLE;
+ features |= LIRC_CAN_SET_SEND_DUTY_CYCLE;
}
if (ir_dev->props->s_rx_carrier_range)
"rc%u", (unsigned int)ir->devno);
if (IS_ERR(ir->raw->thread)) {
+ int ret = PTR_ERR(ir->raw->thread);
+
kfree(ir->raw);
ir->raw = NULL;
- return PTR_ERR(ir->raw->thread);
+ return ret;
}
mutex_lock(&ir_raw_handler_lock);
char *tmp = buf;
int i;
- if (ir_dev->props->driver_type == RC_DRIVER_SCANCODE) {
+ if (ir_dev->props && ir_dev->props->driver_type == RC_DRIVER_SCANCODE) {
enabled = ir_dev->rc_tab.ir_type;
allowed = ir_dev->props->allowed_protos;
- } else {
+ } else if (ir_dev->raw) {
enabled = ir_dev->raw->enabled_protocols;
allowed = ir_raw_get_allowed_protocols();
- }
+ } else
+ return sprintf(tmp, "[builtin]\n");
IR_dprintk(1, "allowed - 0x%llx, enabled - 0x%llx\n",
(long long)allowed,
int rc, i, count = 0;
unsigned long flags;
- if (ir_dev->props->driver_type == RC_DRIVER_SCANCODE)
+ if (ir_dev->props && ir_dev->props->driver_type == RC_DRIVER_SCANCODE)
type = ir_dev->rc_tab.ir_type;
- else
+ else if (ir_dev->raw)
type = ir_dev->raw->enabled_protocols;
+ else {
+ IR_dprintk(1, "Protocol switching not supported\n");
+ return -EINVAL;
+ }
while ((tmp = strsep((char **) &data, " \n")) != NULL) {
if (!*tmp)
}
}
- if (ir_dev->props->driver_type == RC_DRIVER_SCANCODE) {
+ if (ir_dev->props && ir_dev->props->driver_type == RC_DRIVER_SCANCODE) {
spin_lock_irqsave(&ir_dev->rc_tab.lock, flags);
ir_dev->rc_tab.ir_type = type;
spin_unlock_irqrestore(&ir_dev->rc_tab.lock, flags);
{ 0x800f0416, KEY_PLAY },
{ 0x800f0418, KEY_PAUSE },
+ { 0x800f046e, KEY_PLAYPAUSE },
{ 0x800f0419, KEY_STOP },
{ 0x800f0417, KEY_RECORD },
{ 0x800f0411, KEY_VOLUMEDOWN },
{ 0x800f0412, KEY_CHANNELUP },
{ 0x800f0413, KEY_CHANNELDOWN },
+ { 0x800f043a, KEY_BRIGHTNESSUP },
+ { 0x800f0480, KEY_BRIGHTNESSDOWN },
{ 0x800f0401, KEY_NUMERIC_1 },
{ 0x800f0402, KEY_NUMERIC_2 },
{ USB_DEVICE(VENDOR_PHILIPS, 0x0613) },
/* Philips eHome Infrared Transceiver */
{ USB_DEVICE(VENDOR_PHILIPS, 0x0815) },
+ /* Philips/Spinel plus IR transceiver for ASUS */
+ { USB_DEVICE(VENDOR_PHILIPS, 0x206c) },
+ /* Philips/Spinel plus IR transceiver for ASUS */
+ { USB_DEVICE(VENDOR_PHILIPS, 0x2088) },
/* Realtek MCE IR Receiver */
{ USB_DEVICE(VENDOR_REALTEK, 0x0161) },
/* SMK/Toshiba G83C0004D410 */
else
dev->props.rc.core.bulk_mode = false;
- /* Need a higher delay, to avoid wrong repeat */
- dev->rc_input_dev->rep[REP_DELAY] = 500;
-
dib0700_rc_setup(dev);
return 0;
return adap->fe == NULL ? -ENODEV : 0;
}
+/* STK7770P */
+static struct dib7000p_config dib7770p_dib7000p_config = {
+ .output_mpeg2_in_188_bytes = 1,
+
+ .agc_config_count = 1,
+ .agc = &dib7070_agc_config,
+ .bw = &dib7070_bw_config_12_mhz,
+ .tuner_is_baseband = 1,
+ .spur_protect = 1,
+
+ .gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS,
+ .gpio_val = DIB7000P_GPIO_DEFAULT_VALUES,
+ .gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS,
+
+ .hostbus_diversity = 1,
+ .enable_current_mirror = 1,
+ .disable_sample_and_hold = 0,
+};
+
+static int stk7770p_frontend_attach(struct dvb_usb_adapter *adap)
+{
+ struct usb_device_descriptor *p = &adap->dev->udev->descriptor;
+ if (p->idVendor == cpu_to_le16(USB_VID_PINNACLE) &&
+ p->idProduct == cpu_to_le16(USB_PID_PINNACLE_PCTV72E))
+ dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0);
+ else
+ dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
+ msleep(10);
+ dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
+ dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
+ dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
+ dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
+
+ dib0700_ctrl_clock(adap->dev, 72, 1);
+
+ msleep(10);
+ dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
+ msleep(10);
+ dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
+
+ if (dib7000p_i2c_enumeration(&adap->dev->i2c_adap, 1, 18,
+ &dib7770p_dib7000p_config) != 0) {
+ err("%s: dib7000p_i2c_enumeration failed. Cannot continue\n",
+ __func__);
+ return -ENODEV;
+ }
+
+ adap->fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap, 0x80,
+ &dib7770p_dib7000p_config);
+ return adap->fe == NULL ? -ENODEV : 0;
+}
+
/* DIB807x generic */
static struct dibx000_agc_config dib807x_agc_config[2] = {
{
/* 60 */{ USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_T_XXS_2) },
{ USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_STK807XPVR) },
{ USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_STK807XP) },
- { USB_DEVICE(USB_VID_PIXELVIEW, USB_PID_PIXELVIEW_SBTVD) },
+ { USB_DEVICE_VER(USB_VID_PIXELVIEW, USB_PID_PIXELVIEW_SBTVD, 0x000, 0x3f00) },
{ USB_DEVICE(USB_VID_EVOLUTEPC, USB_PID_TVWAY_PLUS) },
/* 65 */{ USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV73ESE) },
{ USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV282E) },
.pid_filter_count = 32,
.pid_filter = stk70x0p_pid_filter,
.pid_filter_ctrl = stk70x0p_pid_filter_ctrl,
- .frontend_attach = stk7070p_frontend_attach,
+ .frontend_attach = stk7770p_frontend_attach,
.tuner_attach = dib7770p_tuner_attach,
DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
}
}
kfree(p);
- if (fw) {
- release_firmware(fw);
- }
+ release_firmware(fw);
return ret;
}
// dprintk( "908: %x, 909: %x\n", reg_908, reg_909);
+ reg_909 |= (state->cfg.disable_sample_and_hold & 1) << 4;
+ reg_908 |= (state->cfg.enable_current_mirror & 1) << 7;
+
dib7000p_write_word(state, 908, reg_908);
dib7000p_write_word(state, 909, reg_909);
}
default:
case GUARD_INTERVAL_1_32: value *= 1; break;
}
- state->div_sync_wait = (value * 3) / 2 + 32; // add 50% SFN margin + compensate for one DVSY-fifo TODO
+ if (state->cfg.diversity_delay == 0)
+ state->div_sync_wait = (value * 3) / 2 + 48; // add 50% SFN margin + compensate for one DVSY-fifo
+ else
+ state->div_sync_wait = (value * 3) / 2 + state->cfg.diversity_delay; // add 50% SFN margin + compensate for one DVSY-fifo
/* deactive the possibility of diversity reception if extended interleaver */
state->div_force_off = !1 && ch->u.ofdm.transmission_mode != TRANSMISSION_MODE_8K;
int (*agc_control) (struct dvb_frontend *, u8 before);
u8 output_mode;
+ u8 disable_sample_and_hold : 1;
+
+ u8 enable_current_mirror : 1;
+ u8 diversity_delay;
+
};
#define DEFAULT_DIB7000P_I2C_ADDRESS 18
*
* @return pointer to descriptor on success, NULL on error.
*/
-struct smscore_buffer_t *smscore_getbuffer(struct smscore_device_t *coredev)
+
+struct smscore_buffer_t *get_entry(struct smscore_device_t *coredev)
{
struct smscore_buffer_t *cb = NULL;
unsigned long flags;
- DEFINE_WAIT(wait);
-
spin_lock_irqsave(&coredev->bufferslock, flags);
-
- /* This function must return a valid buffer, since the buffer list is
- * finite, we check that there is an available buffer, if not, we wait
- * until such buffer become available.
- */
-
- prepare_to_wait(&coredev->buffer_mng_waitq, &wait, TASK_INTERRUPTIBLE);
- if (list_empty(&coredev->buffers)) {
- spin_unlock_irqrestore(&coredev->bufferslock, flags);
- schedule();
- spin_lock_irqsave(&coredev->bufferslock, flags);
+ if (!list_empty(&coredev->buffers)) {
+ cb = (struct smscore_buffer_t *) coredev->buffers.next;
+ list_del(&cb->entry);
}
+ spin_unlock_irqrestore(&coredev->bufferslock, flags);
+ return cb;
+}
- finish_wait(&coredev->buffer_mng_waitq, &wait);
-
- cb = (struct smscore_buffer_t *) coredev->buffers.next;
- list_del(&cb->entry);
+struct smscore_buffer_t *smscore_getbuffer(struct smscore_device_t *coredev)
+{
+ struct smscore_buffer_t *cb = NULL;
- spin_unlock_irqrestore(&coredev->bufferslock, flags);
+ wait_event(coredev->buffer_mng_waitq, (cb = get_entry(coredev)));
return cb;
}
radio->registers[POWERCFG] = POWERCFG_ENABLE;
if (si470x_set_register(radio, POWERCFG) < 0) {
retval = -EIO;
- goto err_all;
+ goto err_video;
}
msleep(110);
EXTRA_CFLAGS += -Idrivers/media/common/tuners
EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core
EXTRA_CFLAGS += -Idrivers/media/dvb/frontends
+EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-usb
#include <media/v4l2-chip-ident.h>
#include <media/cx25840.h>
+#include "dvb-usb-ids.h"
#include "xc5000.h"
#include "cx231xx.h"
.driver_info = CX231XX_BOARD_CNXT_RDE_250},
{USB_DEVICE(0x0572, 0x58A1),
.driver_info = CX231XX_BOARD_CNXT_RDU_250},
+ {USB_DEVICE_VER(USB_VID_PIXELVIEW, USB_PID_PIXELVIEW_SBTVD, 0x4000,0x4fff),
+ .driver_info = CX231XX_BOARD_UNKNOWN},
{},
};
dev->board.name, dev->model);
/* set the direction for GPIO pins */
- cx231xx_set_gpio_direction(dev, dev->board.tuner_gpio->bit, 1);
- cx231xx_set_gpio_value(dev, dev->board.tuner_gpio->bit, 1);
- cx231xx_set_gpio_direction(dev, dev->board.tuner_sif_gpio, 1);
+ if (dev->board.tuner_gpio) {
+ cx231xx_set_gpio_direction(dev, dev->board.tuner_gpio->bit, 1);
+ cx231xx_set_gpio_value(dev, dev->board.tuner_gpio->bit, 1);
+ cx231xx_set_gpio_direction(dev, dev->board.tuner_sif_gpio, 1);
- /* request some modules if any required */
+ /* request some modules if any required */
- /* reset the Tuner */
- cx231xx_gpio_set(dev, dev->board.tuner_gpio);
+ /* reset the Tuner */
+ cx231xx_gpio_set(dev, dev->board.tuner_gpio);
+ }
/* set the mode to Analog mode initially */
cx231xx_set_mode(dev, CX231XX_ANALOG_MODE);
state->volume = v4l2_ctrl_new_std(&state->hdl,
&cx25840_audio_ctrl_ops, V4L2_CID_AUDIO_VOLUME,
- 0, 65335, 65535 / 100, default_volume);
+ 0, 65535, 65535 / 100, default_volume);
state->mute = v4l2_ctrl_new_std(&state->hdl,
&cx25840_audio_ctrl_ops, V4L2_CID_AUDIO_MUTE,
0, 1, 1, 0);
config VIDEO_CX88_ALSA
tristate "Conexant 2388x DMA audio support"
- depends on VIDEO_CX88 && SND && EXPERIMENTAL
+ depends on VIDEO_CX88 && SND
select SND_PCM
---help---
This is a video4linux driver for direct (DMA) audio on
usb_rcvintpipe(dev, ep->bEndpointAddress),
buffer, buffer_len,
int_irq, (void *)gspca_dev, interval);
+ urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
gspca_dev->int_urb = urb;
ret = usb_submit_urb(urb, GFP_KERNEL);
if (ret < 0) {
(data[33] << 10);
avg_lum >>= 9;
atomic_set(&sd->avg_lum, avg_lum);
- gspca_frame_add(gspca_dev, LAST_PACKET,
- data, len);
+ gspca_frame_add(gspca_dev, LAST_PACKET, NULL, 0);
return;
}
if (gspca_dev->last_packet_type == LAST_PACKET) {
struct fb_vblank vblank;
u32 trace;
+ memset(&vblank, 0, sizeof(struct fb_vblank));
+
vblank.flags = FB_VBLANK_HAVE_COUNT |FB_VBLANK_HAVE_VCOUNT |
FB_VBLANK_HAVE_VSYNC;
trace = read_reg(IVTV_REG_DEC_LINE_FIELD) >> 16;
return -EFAULT;
}
- if (in_buf->vb.size < out_buf->vb.size) {
+ if (in_buf->vb.size > out_buf->vb.size) {
v4l2_err(&dev->v4l2_dev, "Output buffer is too small\n");
return -EINVAL;
}
v4l2_m2m_release(dev->m2m_dev);
del_timer_sync(&dev->timer);
video_unregister_device(dev->vfd);
+ video_device_release(dev->vfd);
v4l2_device_unregister(&dev->v4l2_dev);
kfree(dev);
dev_dbg(&client->dev, "%s left=%d, top=%d, width=%d, height=%d\n",
__func__, rect.left, rect.top, rect.width, rect.height);
+ if (a->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+ return -EINVAL;
+
ret = mt9m111_make_rect(client, &rect);
if (!ret)
mt9m111->rect = rect;
static int mt9m111_cropcap(struct v4l2_subdev *sd, struct v4l2_cropcap *a)
{
+ if (a->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+ return -EINVAL;
+
a->bounds.left = MT9M111_MIN_DARK_COLS;
a->bounds.top = MT9M111_MIN_DARK_ROWS;
a->bounds.width = MT9M111_MAX_WIDTH;
a->bounds.height = MT9M111_MAX_HEIGHT;
a->defrect = a->bounds;
- a->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
a->pixelaspect.numerator = 1;
a->pixelaspect.denominator = 1;
mf->width = mt9m111->rect.width;
mf->height = mt9m111->rect.height;
mf->code = mt9m111->fmt->code;
+ mf->colorspace = mt9m111->fmt->colorspace;
mf->field = V4L2_FIELD_NONE;
return 0;
if (mt9v022->model != V4L2_IDENT_MT9V022IX7ATC)
return -EINVAL;
break;
- case 0:
- /* No format change, only geometry */
- break;
default:
return -EINVAL;
}
spin_lock_irqsave(&pcdev->lock, flags);
+ if (*fb_active == NULL)
+ goto out;
+
vb = &(*fb_active)->vb;
dev_dbg(pcdev->dev, "%s (vb=0x%p) 0x%08lx %d\n", __func__,
vb, vb->baddr, vb->bsize);
*fb_active = buf;
+out:
spin_unlock_irqrestore(&pcdev->lock, flags);
}
if (ret >= 0) {
ret = pvr2_ctrl_range_check(cptr,*valptr);
}
- if (maskptr) *maskptr = ~0;
+ *maskptr = ~0;
} else if (cptr->info->type == pvr2_ctl_bool) {
ret = parse_token(ptr,len,valptr,boolNames,
ARRAY_SIZE(boolNames));
} else if (ret == 0) {
*valptr = (*valptr & 1) ? !0 : 0;
}
- if (maskptr) *maskptr = 1;
+ *maskptr = 1;
} else if (cptr->info->type == pvr2_ctl_enum) {
ret = parse_token(
ptr,len,valptr,
if (ret >= 0) {
ret = pvr2_ctrl_range_check(cptr,*valptr);
}
- if (maskptr) *maskptr = ~0;
+ *maskptr = ~0;
} else if (cptr->info->type == pvr2_ctl_bitmask) {
ret = parse_tlist(
ptr,len,maskptr,valptr,
dbg("ctx->out_order_1p= %d", ctx->out_order_1p);
}
+static void fimc_prepare_dma_offset(struct fimc_ctx *ctx, struct fimc_frame *f)
+{
+ struct samsung_fimc_variant *variant = ctx->fimc_dev->variant;
+
+ f->dma_offset.y_h = f->offs_h;
+ if (!variant->pix_hoff)
+ f->dma_offset.y_h *= (f->fmt->depth >> 3);
+
+ f->dma_offset.y_v = f->offs_v;
+
+ f->dma_offset.cb_h = f->offs_h;
+ f->dma_offset.cb_v = f->offs_v;
+
+ f->dma_offset.cr_h = f->offs_h;
+ f->dma_offset.cr_v = f->offs_v;
+
+ if (!variant->pix_hoff) {
+ if (f->fmt->planes_cnt == 3) {
+ f->dma_offset.cb_h >>= 1;
+ f->dma_offset.cr_h >>= 1;
+ }
+ if (f->fmt->color == S5P_FIMC_YCBCR420) {
+ f->dma_offset.cb_v >>= 1;
+ f->dma_offset.cr_v >>= 1;
+ }
+ }
+
+ dbg("in_offset: color= %d, y_h= %d, y_v= %d",
+ f->fmt->color, f->dma_offset.y_h, f->dma_offset.y_v);
+}
+
/**
* fimc_prepare_config - check dimensions, operation and color mode
* and pre-calculate offset and the scaling coefficients.
{
struct fimc_frame *s_frame, *d_frame;
struct fimc_vid_buffer *buf = NULL;
- struct samsung_fimc_variant *variant = ctx->fimc_dev->variant;
int ret = 0;
s_frame = &ctx->s_frame;
swap(d_frame->width, d_frame->height);
}
- /* Prepare the output offset ratios for scaler. */
- d_frame->dma_offset.y_h = d_frame->offs_h;
- if (!variant->pix_hoff)
- d_frame->dma_offset.y_h *= (d_frame->fmt->depth >> 3);
-
- d_frame->dma_offset.y_v = d_frame->offs_v;
-
- d_frame->dma_offset.cb_h = d_frame->offs_h;
- d_frame->dma_offset.cb_v = d_frame->offs_v;
-
- d_frame->dma_offset.cr_h = d_frame->offs_h;
- d_frame->dma_offset.cr_v = d_frame->offs_v;
+ /* Prepare the DMA offset ratios for scaler. */
+ fimc_prepare_dma_offset(ctx, &ctx->s_frame);
+ fimc_prepare_dma_offset(ctx, &ctx->d_frame);
- if (!variant->pix_hoff && d_frame->fmt->planes_cnt == 3) {
- d_frame->dma_offset.cb_h >>= 1;
- d_frame->dma_offset.cb_v >>= 1;
- d_frame->dma_offset.cr_h >>= 1;
- d_frame->dma_offset.cr_v >>= 1;
- }
-
- dbg("out offset: color= %d, y_h= %d, y_v= %d",
- d_frame->fmt->color,
- d_frame->dma_offset.y_h, d_frame->dma_offset.y_v);
-
- /* Prepare the input offset ratios for scaler. */
- s_frame->dma_offset.y_h = s_frame->offs_h;
- if (!variant->pix_hoff)
- s_frame->dma_offset.y_h *= (s_frame->fmt->depth >> 3);
- s_frame->dma_offset.y_v = s_frame->offs_v;
-
- s_frame->dma_offset.cb_h = s_frame->offs_h;
- s_frame->dma_offset.cb_v = s_frame->offs_v;
-
- s_frame->dma_offset.cr_h = s_frame->offs_h;
- s_frame->dma_offset.cr_v = s_frame->offs_v;
-
- if (!variant->pix_hoff && s_frame->fmt->planes_cnt == 3) {
- s_frame->dma_offset.cb_h >>= 1;
- s_frame->dma_offset.cb_v >>= 1;
- s_frame->dma_offset.cr_h >>= 1;
- s_frame->dma_offset.cr_v >>= 1;
- }
-
- dbg("in offset: color= %d, y_h= %d, y_v= %d",
- s_frame->fmt->color, s_frame->dma_offset.y_h,
- s_frame->dma_offset.y_v);
-
- fimc_set_yuv_order(ctx);
-
- /* Check against the scaler ratio. */
if (s_frame->height > (SCALER_MAX_VRATIO * d_frame->height) ||
s_frame->width > (SCALER_MAX_HRATIO * d_frame->width)) {
err("out of scaler range");
return -EINVAL;
}
+ fimc_set_yuv_order(ctx);
}
/* Input DMA mode is not allowed when the scaler is disabled. */
} else {
v4l2_err(&ctx->fimc_dev->m2m.v4l2_dev,
"Wrong buffer/video queue type (%d)\n", f->type);
- return -EINVAL;
+ ret = -EINVAL;
+ goto s_fmt_out;
}
pix = &f->fmt.pix;
}
fimc->work_queue = create_workqueue(dev_name(&fimc->pdev->dev));
- if (!fimc->work_queue)
+ if (!fimc->work_queue) {
+ ret = -ENOMEM;
goto err_irq;
+ }
ret = fimc_register_m2m_device(fimc);
if (ret)
};
static struct samsung_fimc_variant fimc01_variant_s5pv210 = {
+ .pix_hoff = 1,
.has_inp_rot = 1,
.has_out_rot = 1,
.min_inp_pixsize = 16,
};
static struct samsung_fimc_variant fimc2_variant_s5pv210 = {
+ .pix_hoff = 1,
.min_inp_pixsize = 16,
.min_out_pixsize = 32,
},
[SAA7134_BOARD_BEHOLD_COLUMBUS_TVFM] = {
/* Beholder Intl. Ltd. 2008 */
- /*Dmitry Belimov <d.belimov@gmail.com> */
- .name = "Beholder BeholdTV Columbus TVFM",
+ /* Dmitry Belimov <d.belimov@gmail.com> */
+ .name = "Beholder BeholdTV Columbus TV/FM",
.audio_clock = 0x00187de7,
.tuner_type = TUNER_ALPS_TSBE5_PAL,
- .radio_type = UNSET,
- .tuner_addr = ADDR_UNSET,
- .radio_addr = ADDR_UNSET,
+ .radio_type = TUNER_TEA5767,
+ .tuner_addr = 0xc2 >> 1,
+ .radio_addr = 0xc0 >> 1,
.tda9887_conf = TDA9887_PRESENT,
.gpiomask = 0x000A8004,
.inputs = {{
int saa7164_buffer_dealloc(struct saa7164_tsport *port,
struct saa7164_buffer *buf)
{
- struct saa7164_dev *dev = port->dev;
+ struct saa7164_dev *dev;
- if ((buf == 0) || (port == 0))
+ if (!buf || !port)
return SAA_ERR_BAD_PARAMETER;
+ dev = port->dev;
dprintk(DBGLVL_BUF, "%s() deallocating buffer @ 0x%p\n", __func__, buf);
max(frame->dwFrameInterval[0],
frame->dwDefaultFrameInterval));
+ if (dev->quirks & UVC_QUIRK_RESTRICT_FRAME_RATE) {
+ frame->bFrameIntervalType = 1;
+ frame->dwFrameInterval[0] =
+ frame->dwDefaultFrameInterval;
+ }
+
uvc_trace(UVC_TRACE_DESCR, "- %ux%u (%u.%u fps)\n",
frame->wWidth, frame->wHeight,
10000000/frame->dwDefaultFrameInterval,
.bInterfaceClass = USB_CLASS_VENDOR_SPEC,
.bInterfaceSubClass = 1,
.bInterfaceProtocol = 0 },
+ /* Chicony CNF7129 (Asus EEE 100HE) */
+ { .match_flags = USB_DEVICE_ID_MATCH_DEVICE
+ | USB_DEVICE_ID_MATCH_INT_INFO,
+ .idVendor = 0x04f2,
+ .idProduct = 0xb071,
+ .bInterfaceClass = USB_CLASS_VIDEO,
+ .bInterfaceSubClass = 1,
+ .bInterfaceProtocol = 0,
+ .driver_info = UVC_QUIRK_RESTRICT_FRAME_RATE },
/* Alcor Micro AU3820 (Future Boy PC USB Webcam) */
{ .match_flags = USB_DEVICE_ID_MATCH_DEVICE
| USB_DEVICE_ID_MATCH_INT_INFO,
.bInterfaceProtocol = 0,
.driver_info = UVC_QUIRK_PROBE_MINMAX
| UVC_QUIRK_PROBE_DEF },
+ /* IMC Networks (Medion Akoya) */
+ { .match_flags = USB_DEVICE_ID_MATCH_DEVICE
+ | USB_DEVICE_ID_MATCH_INT_INFO,
+ .idVendor = 0x13d3,
+ .idProduct = 0x5103,
+ .bInterfaceClass = USB_CLASS_VIDEO,
+ .bInterfaceSubClass = 1,
+ .bInterfaceProtocol = 0,
+ .driver_info = UVC_QUIRK_STREAM_NO_FID },
/* Syntek (HP Spartan) */
{ .match_flags = USB_DEVICE_ID_MATCH_DEVICE
| USB_DEVICE_ID_MATCH_INT_INFO,
#define UVC_QUIRK_IGNORE_SELECTOR_UNIT 0x00000020
#define UVC_QUIRK_FIX_BANDWIDTH 0x00000080
#define UVC_QUIRK_PROBE_DEF 0x00000100
+#define UVC_QUIRK_RESTRICT_FRAME_RATE 0x00000200
/* Format flags */
#define UVC_FMT_FLAG_COMPRESSED 0x00000001
struct video_code32 {
char loadwhat[16]; /* name or tag of file being passed */
compat_int_t datasize;
- unsigned char *data;
+ compat_uptr_t data;
};
-static int get_microcode32(struct video_code *kp, struct video_code32 __user *up)
+static struct video_code __user *get_microcode32(struct video_code32 *kp)
{
- if (!access_ok(VERIFY_READ, up, sizeof(struct video_code32)) ||
- copy_from_user(kp->loadwhat, up->loadwhat, sizeof(up->loadwhat)) ||
- get_user(kp->datasize, &up->datasize) ||
- copy_from_user(kp->data, up->data, up->datasize))
- return -EFAULT;
- return 0;
+ struct video_code __user *up;
+
+ up = compat_alloc_user_space(sizeof(*up));
+
+ /*
+ * NOTE! We don't actually care if these fail. If the
+ * user address is invalid, the native ioctl will do
+ * the error handling for us
+ */
+ (void) copy_to_user(up->loadwhat, kp->loadwhat, sizeof(up->loadwhat));
+ (void) put_user(kp->datasize, &up->datasize);
+ (void) put_user(compat_ptr(kp->data), &up->data);
+ return up;
}
#define VIDIOCGTUNER32 _IOWR('v', 4, struct video_tuner32)
struct video_tuner vt;
struct video_buffer vb;
struct video_window vw;
- struct video_code vc;
+ struct video_code32 vc;
struct video_audio va;
#endif
struct v4l2_format v2f;
break;
case VIDIOCSMICROCODE:
- err = get_microcode32(&karg.vc, up);
- compatible_arg = 0;
+ /* Copy the 32-bit "video_code32" to kernel space */
+ if (copy_from_user(&karg.vc, up, sizeof(karg.vc)))
+ return -EFAULT;
+ /* Convert the 32-bit version to a 64-bit version in user space */
+ up = get_microcode32(&karg.vc);
break;
case VIDIOCSFREQ:
}
/* read() method */
- dma_free_coherent(q->dev, mem->size, mem->vaddr, mem->dma_handle);
- mem->vaddr = NULL;
+ if (mem->vaddr) {
+ dma_free_coherent(q->dev, mem->size, mem->vaddr, mem->dma_handle);
+ mem->vaddr = NULL;
+ }
}
EXPORT_SYMBOL_GPL(videobuf_dma_contig_free);
* must free the memory.
*/
static struct scatterlist *videobuf_pages_to_sg(struct page **pages,
- int nr_pages, int offset)
+ int nr_pages, int offset, size_t size)
{
struct scatterlist *sglist;
int i;
/* DMA to highmem pages might not work */
goto highmem;
sg_set_page(&sglist[0], pages[0], PAGE_SIZE - offset, offset);
+ size -= PAGE_SIZE - offset;
for (i = 1; i < nr_pages; i++) {
if (NULL == pages[i])
goto nopage;
if (PageHighMem(pages[i]))
goto highmem;
- sg_set_page(&sglist[i], pages[i], PAGE_SIZE, 0);
+ sg_set_page(&sglist[i], pages[i], min(PAGE_SIZE, size), 0);
+ size -= min(PAGE_SIZE, size);
}
return sglist;
first = (data & PAGE_MASK) >> PAGE_SHIFT;
last = ((data+size-1) & PAGE_MASK) >> PAGE_SHIFT;
- dma->offset = data & ~PAGE_MASK;
+ dma->offset = data & ~PAGE_MASK;
+ dma->size = size;
dma->nr_pages = last-first+1;
dma->pages = kmalloc(dma->nr_pages * sizeof(struct page *), GFP_KERNEL);
if (NULL == dma->pages)
if (dma->pages) {
dma->sglist = videobuf_pages_to_sg(dma->pages, dma->nr_pages,
- dma->offset);
+ dma->offset, dma->size);
}
if (dma->vaddr) {
dma->sglist = videobuf_vmalloc_to_sg(dma->vaddr,
irq_tsc = cache_tsc;
for (i = 0; i < ARRAY_SIZE(max8925_irqs); i++) {
irq_data = &max8925_irqs[i];
+ /* 1 -- disable, 0 -- enable */
switch (irq_data->mask_reg) {
case MAX8925_CHG_IRQ1_MASK:
- irq_chg[0] &= irq_data->enable;
+ irq_chg[0] &= ~irq_data->enable;
break;
case MAX8925_CHG_IRQ2_MASK:
- irq_chg[1] &= irq_data->enable;
+ irq_chg[1] &= ~irq_data->enable;
break;
case MAX8925_ON_OFF_IRQ1_MASK:
- irq_on[0] &= irq_data->enable;
+ irq_on[0] &= ~irq_data->enable;
break;
case MAX8925_ON_OFF_IRQ2_MASK:
- irq_on[1] &= irq_data->enable;
+ irq_on[1] &= ~irq_data->enable;
break;
case MAX8925_RTC_IRQ_MASK:
- irq_rtc &= irq_data->enable;
+ irq_rtc &= ~irq_data->enable;
break;
case MAX8925_TSC_IRQ_MASK:
- irq_tsc &= irq_data->enable;
+ irq_tsc &= ~irq_data->enable;
break;
default:
dev_err(chip->dev, "wrong IRQ\n");
irq = irq - wm831x->irq_base;
- if (irq < WM831X_IRQ_GPIO_1 || irq > WM831X_IRQ_GPIO_11)
- return -EINVAL;
+ if (irq < WM831X_IRQ_GPIO_1 || irq > WM831X_IRQ_GPIO_11) {
+ /* Ignore internal-only IRQs */
+ if (irq >= 0 && irq < WM831X_NUM_IRQS)
+ return 0;
+ else
+ return -EINVAL;
+ }
switch (type) {
case IRQ_TYPE_EDGE_BOTH:
If unsure, say N.
To compile this driver as a module, choose M here: the
- module will be called vmware_balloon.
+ module will be called vmw_balloon.
config ARM_CHARLCD
bool "ARM Ltd. Character LCD Driver"
obj-$(CONFIG_HMC6352) += hmc6352.o
obj-y += eeprom/
obj-y += cb710/
-obj-$(CONFIG_VMWARE_BALLOON) += vmware_balloon.o
+obj-$(CONFIG_VMWARE_BALLOON) += vmw_balloon.o
obj-$(CONFIG_ARM_CHARLCD) += arm-charlcd.o
ddata = i2c_get_clientdata(client);
sysfs_remove_group(&client->dev.kobj, &bh1780_attr_group);
- i2c_set_clientdata(client, NULL);
kfree(ddata);
return 0;
if (host->bus_ops && !host->bus_dead) {
if (host->bus_ops->suspend)
err = host->bus_ops->suspend(host);
+ if (err == -ENOSYS || !host->bus_ops->resume) {
+ /*
+ * We simply "remove" the card in this case.
+ * It will be redetected on resume.
+ */
+ if (host->bus_ops->remove)
+ host->bus_ops->remove(host);
+ mmc_claim_host(host);
+ mmc_detach_bus(host);
+ mmc_release_host(host);
+ host->pm_flags = 0;
+ err = 0;
+ }
}
mmc_bus_put(host);
static void sdhci_s3c_notify_change(struct platform_device *dev, int state)
{
struct sdhci_host *host = platform_get_drvdata(dev);
+ unsigned long flags;
+
if (host) {
- spin_lock(&host->lock);
+ spin_lock_irqsave(&host->lock, flags);
if (state) {
dev_dbg(&dev->dev, "card inserted.\n");
host->flags &= ~SDHCI_DEVICE_DEAD;
host->quirks &= ~SDHCI_QUIRK_BROKEN_CARD_DETECTION;
}
tasklet_schedule(&host->card_tasklet);
- spin_unlock(&host->lock);
+ spin_unlock_irqrestore(&host->lock, flags);
}
}
sdhci_remove_host(host, 1);
for (ptr = 0; ptr < 3; ptr++) {
- clk_disable(sc->clk_bus[ptr]);
- clk_put(sc->clk_bus[ptr]);
+ if (sc->clk_bus[ptr]) {
+ clk_disable(sc->clk_bus[ptr]);
+ clk_put(sc->clk_bus[ptr]);
+ }
}
clk_disable(sc->clk_io);
clk_put(sc->clk_io);
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/completion.h>
#include <asm/mach/flash.h>
#include <mach/mxc_nand.h>
int irq;
int eccsize;
- wait_queue_head_t irq_waitq;
+ struct completion op_completion;
uint8_t *data_buf;
unsigned int buf_start;
void (*send_read_id)(struct mxc_nand_host *);
uint16_t (*get_dev_status)(struct mxc_nand_host *);
int (*check_int)(struct mxc_nand_host *);
+ void (*irq_control)(struct mxc_nand_host *, int);
};
/* OOB placement block for use with hardware ecc generation */
{
struct mxc_nand_host *host = dev_id;
- disable_irq_nosync(irq);
+ if (!host->check_int(host))
+ return IRQ_NONE;
- wake_up(&host->irq_waitq);
+ host->irq_control(host, 0);
+
+ complete(&host->op_completion);
return IRQ_HANDLED;
}
if (!(tmp & NFC_V1_V2_CONFIG2_INT))
return 0;
- writew(tmp & ~NFC_V1_V2_CONFIG2_INT, NFC_V1_V2_CONFIG2);
+ if (!cpu_is_mx21())
+ writew(tmp & ~NFC_V1_V2_CONFIG2_INT, NFC_V1_V2_CONFIG2);
return 1;
}
+/*
+ * It has been observed that the i.MX21 cannot read the CONFIG2:INT bit
+ * if interrupts are masked (CONFIG1:INT_MSK is set). To handle this, the
+ * driver can enable/disable the irq line rather than simply masking the
+ * interrupts.
+ */
+static void irq_control_mx21(struct mxc_nand_host *host, int activate)
+{
+ if (activate)
+ enable_irq(host->irq);
+ else
+ disable_irq_nosync(host->irq);
+}
+
+static void irq_control_v1_v2(struct mxc_nand_host *host, int activate)
+{
+ uint16_t tmp;
+
+ tmp = readw(NFC_V1_V2_CONFIG1);
+
+ if (activate)
+ tmp &= ~NFC_V1_V2_CONFIG1_INT_MSK;
+ else
+ tmp |= NFC_V1_V2_CONFIG1_INT_MSK;
+
+ writew(tmp, NFC_V1_V2_CONFIG1);
+}
+
+static void irq_control_v3(struct mxc_nand_host *host, int activate)
+{
+ uint32_t tmp;
+
+ tmp = readl(NFC_V3_CONFIG2);
+
+ if (activate)
+ tmp &= ~NFC_V3_CONFIG2_INT_MSK;
+ else
+ tmp |= NFC_V3_CONFIG2_INT_MSK;
+
+ writel(tmp, NFC_V3_CONFIG2);
+}
+
/* This function polls the NANDFC to wait for the basic operation to
* complete by checking the INT bit of config2 register.
*/
if (useirq) {
if (!host->check_int(host)) {
-
- enable_irq(host->irq);
-
- wait_event(host->irq_waitq, host->check_int(host));
+ INIT_COMPLETION(host->op_completion);
+ host->irq_control(host, 1);
+ wait_for_completion(&host->op_completion);
}
} else {
while (max_retries-- > 0) {
NFC_V3_CONFIG2_2CMD_PHASES |
NFC_V3_CONFIG2_SPAS(mtd->oobsize >> 1) |
NFC_V3_CONFIG2_ST_CMD(0x70) |
+ NFC_V3_CONFIG2_INT_MSK |
NFC_V3_CONFIG2_NUM_ADDR_PHASE0;
if (chip->ecc.mode == NAND_ECC_HW)
host->send_read_id = send_read_id_v1_v2;
host->get_dev_status = get_dev_status_v1_v2;
host->check_int = check_int_v1_v2;
+ if (cpu_is_mx21())
+ host->irq_control = irq_control_mx21;
+ else
+ host->irq_control = irq_control_v1_v2;
}
if (nfc_is_v21()) {
host->send_read_id = send_read_id_v3;
host->check_int = check_int_v3;
host->get_dev_status = get_dev_status_v3;
+ host->irq_control = irq_control_v3;
oob_smallpage = &nandv2_hw_eccoob_smallpage;
oob_largepage = &nandv2_hw_eccoob_largepage;
} else
this->options |= NAND_USE_FLASH_BBT;
}
- init_waitqueue_head(&host->irq_waitq);
+ init_completion(&host->op_completion);
host->irq = platform_get_irq(pdev, 0);
+ /*
+ * mask the interrupt. For i.MX21 explicitely call
+ * irq_control_v1_v2 to use the mask bit. We can't call
+ * disable_irq_nosync() for an interrupt we do not own yet.
+ */
+ if (cpu_is_mx21())
+ irq_control_v1_v2(host, 0);
+ else
+ host->irq_control(host, 0);
+
err = request_irq(host->irq, mxc_nfc_irq, IRQF_DISABLED, DRIVER_NAME, host);
if (err)
goto eirq;
+ host->irq_control(host, 0);
+
+ /*
+ * Now that the interrupt is disabled make sure the interrupt
+ * mask bit is cleared on i.MX21. Otherwise we can't read
+ * the interrupt status bit on this machine.
+ */
+ if (cpu_is_mx21())
+ irq_control_v1_v2(host, 1);
+
/* first scan to find the device and get the page size */
if (nand_scan_ident(mtd, 1, NULL)) {
err = -ENXIO;
prefetch_status = gpmc_read_status(GPMC_PREFETCH_COUNT);
} while (prefetch_status);
/* disable and stop the PFPW engine */
- gpmc_prefetch_reset();
+ gpmc_prefetch_reset(info->gpmc_cs);
dma_unmap_single(&info->pdev->dev, dma_addr, len, dir);
return 0;
{
struct vortex_private *vp = netdev_priv(dev);
+ if (!VORTEX_PCI(vp))
+ return;
+
wol->supported = WAKE_MAGIC;
wol->wolopts = 0;
static int vortex_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
{
struct vortex_private *vp = netdev_priv(dev);
+
+ if (!VORTEX_PCI(vp))
+ return -EOPNOTSUPP;
+
if (wol->wolopts & ~WAKE_MAGIC)
return -EINVAL;
return;
}
+ if (VORTEX_PCI(vp)->current_state < PCI_D3hot)
+ return;
+
/* Change the power state to D3; RxEnable doesn't take effect. */
pci_set_power_state(VORTEX_PCI(vp), PCI_D3hot);
}
config MV643XX_ETH
tristate "Marvell Discovery (643XX) and Orion ethernet support"
- depends on MV64X60 || PPC32 || PLAT_ORION
+ depends on (MV64X60 || PPC32 || PLAT_ORION) && INET
select INET_LRO
select PHYLIB
help
config PASEMI_MAC
tristate "PA Semi 1/10Gbit MAC"
- depends on PPC_PASEMI && PCI
+ depends on PPC_PASEMI && PCI && INET
select PHYLIB
select INET_LRO
help
rrd_ring->desc = NULL;
rrd_ring->dma = 0;
+
+ adapter->cmb.dma = 0;
+ adapter->cmb.cmb = NULL;
+
+ adapter->smb.dma = 0;
+ adapter->smb.smb = NULL;
}
static void atl1_setup_mac_ctrl(struct atl1_adapter *adapter)
pci_enable_wake(pdev, PCI_D3cold, 0);
atl1_reset_hw(&adapter->hw);
- adapter->cmb.cmb->int_stats = 0;
- if (netif_running(netdev))
+ if (netif_running(netdev)) {
+ adapter->cmb.cmb->int_stats = 0;
atl1_up(adapter);
+ }
netif_device_attach(netdev);
return 0;
dev->irq = sdev->irq;
SET_ETHTOOL_OPS(dev, &b44_ethtool_ops);
- netif_carrier_off(dev);
-
err = ssb_bus_powerup(sdev->bus, 0);
if (err) {
dev_err(sdev->dev,
goto err_out_powerdown;
}
+ netif_carrier_off(dev);
+
ssb_set_drvdata(sdev, dev);
/* Chip reset provides power to the b44 MAC & PCI cores, which
res = dev_alloc_name(bond_dev, "bond%d");
if (res < 0)
goto out;
+ } else {
+ /*
+ * If we're given a name to register
+ * we need to ensure that its not already
+ * registered
+ */
+ res = -EEXIST;
+ if (__dev_get_by_name(net, name) != NULL)
+ goto out;
}
res = register_netdevice(bond_dev);
E1000_SCTL = 0x00024, /* SerDes Control - RW */
E1000_FCAL = 0x00028, /* Flow Control Address Low - RW */
E1000_FCAH = 0x0002C, /* Flow Control Address High -RW */
+ E1000_FEXTNVM4 = 0x00024, /* Future Extended NVM 4 - RW */
E1000_FEXTNVM = 0x00028, /* Future Extended NVM - RW */
E1000_FCT = 0x00030, /* Flow Control Type - RW */
E1000_VET = 0x00038, /* VLAN Ether Type - RW */
#define E1000_FEXTNVM_SW_CONFIG 1
#define E1000_FEXTNVM_SW_CONFIG_ICH8M (1 << 27) /* Bit redefined for ICH8M :/ */
+#define E1000_FEXTNVM4_BEACON_DURATION_MASK 0x7
+#define E1000_FEXTNVM4_BEACON_DURATION_8USEC 0x7
+#define E1000_FEXTNVM4_BEACON_DURATION_16USEC 0x3
+
#define PCIE_ICH8_SNOOP_ALL PCIE_NO_SNOOP_ALL
#define E1000_ICH_RAR_ENTRIES 7
/* SMBus Address Phy Register */
#define HV_SMB_ADDR PHY_REG(768, 26)
+#define HV_SMB_ADDR_MASK 0x007F
#define HV_SMB_ADDR_PEC_EN 0x0200
#define HV_SMB_ADDR_VALID 0x0080
static s32 e1000_set_mdio_slow_mode_hv(struct e1000_hw *hw);
static bool e1000_check_mng_mode_ich8lan(struct e1000_hw *hw);
static bool e1000_check_mng_mode_pchlan(struct e1000_hw *hw);
+static s32 e1000_k1_workaround_lv(struct e1000_hw *hw);
+static void e1000_gate_hw_phy_config_ich8lan(struct e1000_hw *hw, bool gate);
static inline u16 __er16flash(struct e1000_hw *hw, unsigned long reg)
{
static s32 e1000_init_phy_params_pchlan(struct e1000_hw *hw)
{
struct e1000_phy_info *phy = &hw->phy;
- u32 ctrl;
+ u32 ctrl, fwsm;
s32 ret_val = 0;
phy->addr = 1;
* disabled, then toggle the LANPHYPC Value bit to force
* the interconnect to PCIe mode.
*/
- if (!(er32(FWSM) & E1000_ICH_FWSM_FW_VALID)) {
+ fwsm = er32(FWSM);
+ if (!(fwsm & E1000_ICH_FWSM_FW_VALID)) {
ctrl = er32(CTRL);
ctrl |= E1000_CTRL_LANPHYPC_OVERRIDE;
ctrl &= ~E1000_CTRL_LANPHYPC_VALUE;
ctrl &= ~E1000_CTRL_LANPHYPC_OVERRIDE;
ew32(CTRL, ctrl);
msleep(50);
+
+ /*
+ * Gate automatic PHY configuration by hardware on
+ * non-managed 82579
+ */
+ if (hw->mac.type == e1000_pch2lan)
+ e1000_gate_hw_phy_config_ich8lan(hw, true);
}
/*
if (ret_val)
goto out;
+ /* Ungate automatic PHY configuration on non-managed 82579 */
+ if ((hw->mac.type == e1000_pch2lan) &&
+ !(fwsm & E1000_ICH_FWSM_FW_VALID)) {
+ msleep(10);
+ e1000_gate_hw_phy_config_ich8lan(hw, false);
+ }
+
phy->id = e1000_phy_unknown;
ret_val = e1000e_get_phy_id(hw);
if (ret_val)
if (mac->type == e1000_ich8lan)
e1000e_set_kmrn_lock_loss_workaround_ich8lan(hw, true);
- /* Disable PHY configuration by hardware, config by software */
- if (mac->type == e1000_pch2lan) {
- u32 extcnf_ctrl = er32(EXTCNF_CTRL);
-
- extcnf_ctrl |= E1000_EXTCNF_CTRL_GATE_PHY_CFG;
- ew32(EXTCNF_CTRL, extcnf_ctrl);
- }
+ /* Gate automatic PHY configuration by hardware on managed 82579 */
+ if ((mac->type == e1000_pch2lan) &&
+ (er32(FWSM) & E1000_ICH_FWSM_FW_VALID))
+ e1000_gate_hw_phy_config_ich8lan(hw, true);
return 0;
}
goto out;
}
+ if (hw->mac.type == e1000_pch2lan) {
+ ret_val = e1000_k1_workaround_lv(hw);
+ if (ret_val)
+ goto out;
+ }
+
/*
* Check if there was DownShift, must be checked
* immediately after link-up
return (fwsm & E1000_ICH_FWSM_RSPCIPHY) ? 0 : E1000_BLK_PHY_RESET;
}
+/**
+ * e1000_write_smbus_addr - Write SMBus address to PHY needed during Sx states
+ * @hw: pointer to the HW structure
+ *
+ * Assumes semaphore already acquired.
+ *
+ **/
+static s32 e1000_write_smbus_addr(struct e1000_hw *hw)
+{
+ u16 phy_data;
+ u32 strap = er32(STRAP);
+ s32 ret_val = 0;
+
+ strap &= E1000_STRAP_SMBUS_ADDRESS_MASK;
+
+ ret_val = e1000_read_phy_reg_hv_locked(hw, HV_SMB_ADDR, &phy_data);
+ if (ret_val)
+ goto out;
+
+ phy_data &= ~HV_SMB_ADDR_MASK;
+ phy_data |= (strap >> E1000_STRAP_SMBUS_ADDRESS_SHIFT);
+ phy_data |= HV_SMB_ADDR_PEC_EN | HV_SMB_ADDR_VALID;
+ ret_val = e1000_write_phy_reg_hv_locked(hw, HV_SMB_ADDR, phy_data);
+
+out:
+ return ret_val;
+}
+
/**
* e1000_sw_lcd_config_ich8lan - SW-based LCD Configuration
* @hw: pointer to the HW structure
**/
static s32 e1000_sw_lcd_config_ich8lan(struct e1000_hw *hw)
{
- struct e1000_adapter *adapter = hw->adapter;
struct e1000_phy_info *phy = &hw->phy;
u32 i, data, cnf_size, cnf_base_addr, sw_cfg_mask;
s32 ret_val = 0;
if (phy->type != e1000_phy_igp_3)
return ret_val;
- if (adapter->pdev->device == E1000_DEV_ID_ICH8_IGP_AMT) {
+ if ((hw->adapter->pdev->device == E1000_DEV_ID_ICH8_IGP_AMT) ||
+ (hw->adapter->pdev->device == E1000_DEV_ID_ICH8_IGP_C)) {
sw_cfg_mask = E1000_FEXTNVM_SW_CONFIG;
break;
}
cnf_base_addr = data & E1000_EXTCNF_CTRL_EXT_CNF_POINTER_MASK;
cnf_base_addr >>= E1000_EXTCNF_CTRL_EXT_CNF_POINTER_SHIFT;
- if (!(data & E1000_EXTCNF_CTRL_OEM_WRITE_ENABLE) &&
- ((hw->mac.type == e1000_pchlan) ||
- (hw->mac.type == e1000_pch2lan))) {
+ if ((!(data & E1000_EXTCNF_CTRL_OEM_WRITE_ENABLE) &&
+ (hw->mac.type == e1000_pchlan)) ||
+ (hw->mac.type == e1000_pch2lan)) {
/*
* HW configures the SMBus address and LEDs when the
* OEM and LCD Write Enable bits are set in the NVM.
* When both NVM bits are cleared, SW will configure
* them instead.
*/
- data = er32(STRAP);
- data &= E1000_STRAP_SMBUS_ADDRESS_MASK;
- reg_data = data >> E1000_STRAP_SMBUS_ADDRESS_SHIFT;
- reg_data |= HV_SMB_ADDR_PEC_EN | HV_SMB_ADDR_VALID;
- ret_val = e1000_write_phy_reg_hv_locked(hw, HV_SMB_ADDR,
- reg_data);
+ ret_val = e1000_write_smbus_addr(hw);
if (ret_val)
goto out;
goto out;
/* Enable jumbo frame workaround in the PHY */
- e1e_rphy(hw, PHY_REG(769, 20), &data);
- ret_val = e1e_wphy(hw, PHY_REG(769, 20), data & ~(1 << 14));
- if (ret_val)
- goto out;
e1e_rphy(hw, PHY_REG(769, 23), &data);
data &= ~(0x7F << 5);
data |= (0x37 << 5);
goto out;
e1e_rphy(hw, PHY_REG(769, 16), &data);
data &= ~(1 << 13);
- data |= (1 << 12);
ret_val = e1e_wphy(hw, PHY_REG(769, 16), data);
if (ret_val)
goto out;
mac_reg = er32(RCTL);
mac_reg &= ~E1000_RCTL_SECRC;
- ew32(FFLT_DBG, mac_reg);
+ ew32(RCTL, mac_reg);
ret_val = e1000e_read_kmrn_reg(hw,
E1000_KMRNCTRLSTA_CTRL_OFFSET,
goto out;
/* Write PHY register values back to h/w defaults */
- e1e_rphy(hw, PHY_REG(769, 20), &data);
- ret_val = e1e_wphy(hw, PHY_REG(769, 20), data & ~(1 << 14));
- if (ret_val)
- goto out;
e1e_rphy(hw, PHY_REG(769, 23), &data);
data &= ~(0x7F << 5);
ret_val = e1e_wphy(hw, PHY_REG(769, 23), data);
if (ret_val)
goto out;
e1e_rphy(hw, PHY_REG(769, 16), &data);
- data &= ~(1 << 12);
data |= (1 << 13);
ret_val = e1e_wphy(hw, PHY_REG(769, 16), data);
if (ret_val)
return ret_val;
}
+/**
+ * e1000_k1_gig_workaround_lv - K1 Si workaround
+ * @hw: pointer to the HW structure
+ *
+ * Workaround to set the K1 beacon duration for 82579 parts
+ **/
+static s32 e1000_k1_workaround_lv(struct e1000_hw *hw)
+{
+ s32 ret_val = 0;
+ u16 status_reg = 0;
+ u32 mac_reg;
+
+ if (hw->mac.type != e1000_pch2lan)
+ goto out;
+
+ /* Set K1 beacon duration based on 1Gbps speed or otherwise */
+ ret_val = e1e_rphy(hw, HV_M_STATUS, &status_reg);
+ if (ret_val)
+ goto out;
+
+ if ((status_reg & (HV_M_STATUS_LINK_UP | HV_M_STATUS_AUTONEG_COMPLETE))
+ == (HV_M_STATUS_LINK_UP | HV_M_STATUS_AUTONEG_COMPLETE)) {
+ mac_reg = er32(FEXTNVM4);
+ mac_reg &= ~E1000_FEXTNVM4_BEACON_DURATION_MASK;
+
+ if (status_reg & HV_M_STATUS_SPEED_1000)
+ mac_reg |= E1000_FEXTNVM4_BEACON_DURATION_8USEC;
+ else
+ mac_reg |= E1000_FEXTNVM4_BEACON_DURATION_16USEC;
+
+ ew32(FEXTNVM4, mac_reg);
+ }
+
+out:
+ return ret_val;
+}
+
+/**
+ * e1000_gate_hw_phy_config_ich8lan - disable PHY config via hardware
+ * @hw: pointer to the HW structure
+ * @gate: boolean set to true to gate, false to ungate
+ *
+ * Gate/ungate the automatic PHY configuration via hardware; perform
+ * the configuration via software instead.
+ **/
+static void e1000_gate_hw_phy_config_ich8lan(struct e1000_hw *hw, bool gate)
+{
+ u32 extcnf_ctrl;
+
+ if (hw->mac.type != e1000_pch2lan)
+ return;
+
+ extcnf_ctrl = er32(EXTCNF_CTRL);
+
+ if (gate)
+ extcnf_ctrl |= E1000_EXTCNF_CTRL_GATE_PHY_CFG;
+ else
+ extcnf_ctrl &= ~E1000_EXTCNF_CTRL_GATE_PHY_CFG;
+
+ ew32(EXTCNF_CTRL, extcnf_ctrl);
+ return;
+}
+
/**
* e1000_lan_init_done_ich8lan - Check for PHY config completion
* @hw: pointer to the HW structure
if (e1000_check_reset_block(hw))
goto out;
+ /* Allow time for h/w to get to quiescent state after reset */
+ msleep(10);
+
/* Perform any necessary post-reset workarounds */
switch (hw->mac.type) {
case e1000_pchlan:
/* Configure the LCD with the OEM bits in NVM */
ret_val = e1000_oem_bits_config_ich8lan(hw, true);
+ /* Ungate automatic PHY configuration on non-managed 82579 */
+ if ((hw->mac.type == e1000_pch2lan) &&
+ !(er32(FWSM) & E1000_ICH_FWSM_FW_VALID)) {
+ msleep(10);
+ e1000_gate_hw_phy_config_ich8lan(hw, false);
+ }
+
out:
return ret_val;
}
{
s32 ret_val = 0;
+ /* Gate automatic PHY configuration by hardware on non-managed 82579 */
+ if ((hw->mac.type == e1000_pch2lan) &&
+ !(er32(FWSM) & E1000_ICH_FWSM_FW_VALID))
+ e1000_gate_hw_phy_config_ich8lan(hw, true);
+
ret_val = e1000e_phy_hw_reset_generic(hw);
if (ret_val)
goto out;
* external PHY is reset.
*/
ctrl |= E1000_CTRL_PHY_RST;
+
+ /*
+ * Gate automatic PHY configuration by hardware on
+ * non-managed 82579
+ */
+ if ((hw->mac.type == e1000_pch2lan) &&
+ !(er32(FWSM) & E1000_ICH_FWSM_FW_VALID))
+ e1000_gate_hw_phy_config_ich8lan(hw, true);
}
ret_val = e1000_acquire_swflag_ich8lan(hw);
e_dbg("Issuing a global reset to ich8lan\n");
void e1000e_disable_gig_wol_ich8lan(struct e1000_hw *hw)
{
u32 phy_ctrl;
+ s32 ret_val;
phy_ctrl = er32(PHY_CTRL);
phy_ctrl |= E1000_PHY_CTRL_D0A_LPLU | E1000_PHY_CTRL_GBE_DISABLE;
ew32(PHY_CTRL, phy_ctrl);
- if (hw->mac.type >= e1000_pchlan)
- e1000_phy_hw_reset_ich8lan(hw);
+ if (hw->mac.type >= e1000_pchlan) {
+ e1000_oem_bits_config_ich8lan(hw, true);
+ ret_val = hw->phy.ops.acquire(hw);
+ if (ret_val)
+ return;
+ e1000_write_smbus_addr(hw);
+ hw->phy.ops.release(hw);
+ }
}
/**
u32 psrctl = 0;
u32 pages = 0;
+ /* Workaround Si errata on 82579 - configure jumbo frame flow */
+ if (hw->mac.type == e1000_pch2lan) {
+ s32 ret_val;
+
+ if (adapter->netdev->mtu > ETH_DATA_LEN)
+ ret_val = e1000_lv_jumbo_workaround_ich8lan(hw, true);
+ else
+ ret_val = e1000_lv_jumbo_workaround_ich8lan(hw, false);
+ }
+
/* Program MC offset vector base */
rctl = er32(RCTL);
rctl &= ~(3 << E1000_RCTL_MO_SHIFT);
e1e_wphy(hw, 22, phy_data);
}
- /* Workaround Si errata on 82579 - configure jumbo frame flow */
- if (hw->mac.type == e1000_pch2lan) {
- s32 ret_val;
-
- if (rctl & E1000_RCTL_LPE)
- ret_val = e1000_lv_jumbo_workaround_ich8lan(hw, true);
- else
- ret_val = e1000_lv_jumbo_workaround_ich8lan(hw, false);
- }
-
/* Setup buffer sizes */
rctl &= ~E1000_RCTL_SZ_4096;
rctl |= E1000_RCTL_BSEX;
return -EINVAL;
}
+ /* Jumbo frame workaround on 82579 requires CRC be stripped */
+ if ((adapter->hw.mac.type == e1000_pch2lan) &&
+ !(adapter->flags2 & FLAG2_CRC_STRIPPING) &&
+ (new_mtu > ETH_DATA_LEN)) {
+ e_err("Jumbo Frames not supported on 82579 when CRC "
+ "stripping is disabled.\n");
+ return -EINVAL;
+ }
+
/* 82573 Errata 17 */
if (((adapter->hw.mac.type == e1000_82573) ||
(adapter->hw.mac.type == e1000_82574)) &&
int length = cqe->num_bytes_transfered - 4; /*remove CRC */
skb_put(skb, length);
- skb->ip_summed = CHECKSUM_UNNECESSARY;
skb->protocol = eth_type_trans(skb, dev);
+
+ /* The packet was not an IPV4 packet so a complemented checksum was
+ calculated. The value is found in the Internet Checksum field. */
+ if (cqe->status & EHEA_CQE_BLIND_CKSUM) {
+ skb->ip_summed = CHECKSUM_COMPLETE;
+ skb->csum = csum_unfold(~cqe->inet_checksum_value);
+ } else
+ skb->ip_summed = CHECKSUM_UNNECESSARY;
}
static inline struct sk_buff *get_skb_by_index(struct sk_buff **skb_array,
#define EHEA_CQE_TYPE_RQ 0x60
#define EHEA_CQE_STAT_ERR_MASK 0x700F
#define EHEA_CQE_STAT_FAT_ERR_MASK 0xF
+#define EHEA_CQE_BLIND_CKSUM 0x8000
#define EHEA_CQE_STAT_ERR_TCP 0x4000
#define EHEA_CQE_STAT_ERR_IP 0x2000
#define EHEA_CQE_STAT_ERR_CRC 0x1000
{
struct fec_enet_private *fep = netdev_priv(dev);
struct phy_device *phy_dev = NULL;
- int ret;
+ char mdio_bus_id[MII_BUS_ID_SIZE];
+ char phy_name[MII_BUS_ID_SIZE + 3];
+ int phy_id;
fep->phy_dev = NULL;
- /* find the first phy */
- phy_dev = phy_find_first(fep->mii_bus);
- if (!phy_dev) {
- printk(KERN_ERR "%s: no PHY found\n", dev->name);
- return -ENODEV;
+ /* check for attached phy */
+ for (phy_id = 0; (phy_id < PHY_MAX_ADDR); phy_id++) {
+ if ((fep->mii_bus->phy_mask & (1 << phy_id)))
+ continue;
+ if (fep->mii_bus->phy_map[phy_id] == NULL)
+ continue;
+ if (fep->mii_bus->phy_map[phy_id]->phy_id == 0)
+ continue;
+ strncpy(mdio_bus_id, fep->mii_bus->id, MII_BUS_ID_SIZE);
+ break;
}
- /* attach the mac to the phy */
- ret = phy_connect_direct(dev, phy_dev,
- &fec_enet_adjust_link, 0,
- PHY_INTERFACE_MODE_MII);
- if (ret) {
- printk(KERN_ERR "%s: Could not attach to PHY\n", dev->name);
- return ret;
+ if (phy_id >= PHY_MAX_ADDR) {
+ printk(KERN_INFO "%s: no PHY, assuming direct connection "
+ "to switch\n", dev->name);
+ strncpy(mdio_bus_id, "0", MII_BUS_ID_SIZE);
+ phy_id = 0;
+ }
+
+ snprintf(phy_name, MII_BUS_ID_SIZE, PHY_ID_FMT, mdio_bus_id, phy_id);
+ phy_dev = phy_connect(dev, phy_name, &fec_enet_adjust_link, 0,
+ PHY_INTERFACE_MODE_MII);
+ if (IS_ERR(phy_dev)) {
+ printk(KERN_ERR "%s: could not attach to PHY\n", dev->name);
+ return PTR_ERR(phy_dev);
}
/* mask with MAC supported features */
fep->mii_bus->read = fec_enet_mdio_read;
fep->mii_bus->write = fec_enet_mdio_write;
fep->mii_bus->reset = fec_enet_mdio_reset;
- snprintf(fep->mii_bus->id, MII_BUS_ID_SIZE, "%x", pdev->id);
+ snprintf(fep->mii_bus->id, MII_BUS_ID_SIZE, "%x", pdev->id + 1);
fep->mii_bus->priv = fep;
fep->mii_bus->parent = &pdev->dev;
if (ret)
goto failed_mii_init;
+ /* Carrier starts down, phylib will bring it up */
+ netif_carrier_off(ndev);
+
ret = register_netdev(ndev);
if (ret)
goto failed_register;
if (dev->emac_irq != NO_IRQ)
irq_dispose_mapping(dev->emac_irq);
err_free:
- kfree(ndev);
+ free_netdev(ndev);
err_gone:
/* if we were on the bootlist, remove us as we won't show up and
* wake up all waiters to notify them in case they were waiting
if (dev->emac_irq != NO_IRQ)
irq_dispose_mapping(dev->emac_irq);
- kfree(dev->ndev);
+ free_netdev(dev->ndev);
return 0;
}
if (pkt_offset)
skb_pull(skb, pkt_offset);
- skb->truesize = skb->len + sizeof(struct sk_buff);
skb->protocol = eth_type_trans(skb, netdev);
napi_gro_receive(&sds_ring->napi, skb);
skb_put(skb, lro_length + data_offset);
- skb->truesize = skb->len + sizeof(struct sk_buff) + skb_headroom(skb);
-
skb_pull(skb, l2_hdr_offset);
skb->protocol = eth_type_trans(skb, netdev);
return -ENOMEM;
}
- skb_reserve(skb, 2);
+ skb_reserve(skb, NET_IP_ALIGN);
dma = pci_map_single(pdev, skb->data,
rds_ring->dma_size, PCI_DMA_FROMDEVICE);
if (pkt_offset)
skb_pull(skb, pkt_offset);
- skb->truesize = skb->len + sizeof(struct sk_buff);
skb->protocol = eth_type_trans(skb, netdev);
napi_gro_receive(&sds_ring->napi, skb);
skb_put(skb, lro_length + data_offset);
- skb->truesize = skb->len + sizeof(struct sk_buff) + skb_headroom(skb);
-
skb_pull(skb, l2_hdr_offset);
skb->protocol = eth_type_trans(skb, netdev);
if (pkt_offset)
skb_pull(skb, pkt_offset);
- skb->truesize = skb->len + sizeof(struct sk_buff);
-
if (!qlcnic_check_loopback_buff(skb->data))
adapter->diag_cnt++;
if ((RTL_R8(ChipCmd) & CmdRxEnb) == 0)
return;
- counters = pci_alloc_consistent(tp->pci_dev, sizeof(*counters), &paddr);
+ counters = dma_alloc_coherent(&tp->pci_dev->dev, sizeof(*counters),
+ &paddr, GFP_KERNEL);
if (!counters)
return;
RTL_W32(CounterAddrLow, 0);
RTL_W32(CounterAddrHigh, 0);
- pci_free_consistent(tp->pci_dev, sizeof(*counters), counters, paddr);
+ dma_free_coherent(&tp->pci_dev->dev, sizeof(*counters), counters,
+ paddr);
}
static void rtl8169_get_ethtool_stats(struct net_device *dev,
/*
* Rx and Tx desscriptors needs 256 bytes alignment.
- * pci_alloc_consistent provides more.
+ * dma_alloc_coherent provides more.
*/
- tp->TxDescArray = pci_alloc_consistent(pdev, R8169_TX_RING_BYTES,
- &tp->TxPhyAddr);
+ tp->TxDescArray = dma_alloc_coherent(&pdev->dev, R8169_TX_RING_BYTES,
+ &tp->TxPhyAddr, GFP_KERNEL);
if (!tp->TxDescArray)
goto err_pm_runtime_put;
- tp->RxDescArray = pci_alloc_consistent(pdev, R8169_RX_RING_BYTES,
- &tp->RxPhyAddr);
+ tp->RxDescArray = dma_alloc_coherent(&pdev->dev, R8169_RX_RING_BYTES,
+ &tp->RxPhyAddr, GFP_KERNEL);
if (!tp->RxDescArray)
goto err_free_tx_0;
err_release_ring_2:
rtl8169_rx_clear(tp);
err_free_rx_1:
- pci_free_consistent(pdev, R8169_RX_RING_BYTES, tp->RxDescArray,
- tp->RxPhyAddr);
+ dma_free_coherent(&pdev->dev, R8169_RX_RING_BYTES, tp->RxDescArray,
+ tp->RxPhyAddr);
tp->RxDescArray = NULL;
err_free_tx_0:
- pci_free_consistent(pdev, R8169_TX_RING_BYTES, tp->TxDescArray,
- tp->TxPhyAddr);
+ dma_free_coherent(&pdev->dev, R8169_TX_RING_BYTES, tp->TxDescArray,
+ tp->TxPhyAddr);
tp->TxDescArray = NULL;
err_pm_runtime_put:
pm_runtime_put_noidle(&pdev->dev);
{
struct pci_dev *pdev = tp->pci_dev;
- pci_unmap_single(pdev, le64_to_cpu(desc->addr), tp->rx_buf_sz,
+ dma_unmap_single(&pdev->dev, le64_to_cpu(desc->addr), tp->rx_buf_sz,
PCI_DMA_FROMDEVICE);
dev_kfree_skb(*sk_buff);
*sk_buff = NULL;
static struct sk_buff *rtl8169_alloc_rx_skb(struct pci_dev *pdev,
struct net_device *dev,
struct RxDesc *desc, int rx_buf_sz,
- unsigned int align)
+ unsigned int align, gfp_t gfp)
{
struct sk_buff *skb;
dma_addr_t mapping;
pad = align ? align : NET_IP_ALIGN;
- skb = netdev_alloc_skb(dev, rx_buf_sz + pad);
+ skb = __netdev_alloc_skb(dev, rx_buf_sz + pad, gfp);
if (!skb)
goto err_out;
skb_reserve(skb, align ? ((pad - 1) & (unsigned long)skb->data) : pad);
- mapping = pci_map_single(pdev, skb->data, rx_buf_sz,
+ mapping = dma_map_single(&pdev->dev, skb->data, rx_buf_sz,
PCI_DMA_FROMDEVICE);
rtl8169_map_to_asic(desc, mapping, rx_buf_sz);
}
static u32 rtl8169_rx_fill(struct rtl8169_private *tp, struct net_device *dev,
- u32 start, u32 end)
+ u32 start, u32 end, gfp_t gfp)
{
u32 cur;
skb = rtl8169_alloc_rx_skb(tp->pci_dev, dev,
tp->RxDescArray + i,
- tp->rx_buf_sz, tp->align);
+ tp->rx_buf_sz, tp->align, gfp);
if (!skb)
break;
memset(tp->tx_skb, 0x0, NUM_TX_DESC * sizeof(struct ring_info));
memset(tp->Rx_skbuff, 0x0, NUM_RX_DESC * sizeof(struct sk_buff *));
- if (rtl8169_rx_fill(tp, dev, 0, NUM_RX_DESC) != NUM_RX_DESC)
+ if (rtl8169_rx_fill(tp, dev, 0, NUM_RX_DESC, GFP_KERNEL) != NUM_RX_DESC)
goto err_out;
rtl8169_mark_as_last_descriptor(tp->RxDescArray + NUM_RX_DESC - 1);
{
unsigned int len = tx_skb->len;
- pci_unmap_single(pdev, le64_to_cpu(desc->addr), len, PCI_DMA_TODEVICE);
+ dma_unmap_single(&pdev->dev, le64_to_cpu(desc->addr), len,
+ PCI_DMA_TODEVICE);
desc->opts1 = 0x00;
desc->opts2 = 0x00;
desc->addr = 0x00;
txd = tp->TxDescArray + entry;
len = frag->size;
addr = ((void *) page_address(frag->page)) + frag->page_offset;
- mapping = pci_map_single(tp->pci_dev, addr, len, PCI_DMA_TODEVICE);
+ mapping = dma_map_single(&tp->pci_dev->dev, addr, len,
+ PCI_DMA_TODEVICE);
/* anti gcc 2.95.3 bugware (sic) */
status = opts1 | len | (RingEnd * !((entry + 1) % NUM_TX_DESC));
tp->tx_skb[entry].skb = skb;
}
- mapping = pci_map_single(tp->pci_dev, skb->data, len, PCI_DMA_TODEVICE);
+ mapping = dma_map_single(&tp->pci_dev->dev, skb->data, len,
+ PCI_DMA_TODEVICE);
tp->tx_skb[entry].len = len;
txd->addr = cpu_to_le64(mapping);
if (!skb)
goto out;
- pci_dma_sync_single_for_cpu(tp->pci_dev, addr, pkt_size,
- PCI_DMA_FROMDEVICE);
+ dma_sync_single_for_cpu(&tp->pci_dev->dev, addr, pkt_size,
+ PCI_DMA_FROMDEVICE);
skb_copy_from_linear_data(*sk_buff, skb->data, pkt_size);
*sk_buff = skb;
done = true;
rtl8169_rx_csum(skb, desc);
if (rtl8169_try_rx_copy(&skb, tp, pkt_size, addr)) {
- pci_dma_sync_single_for_device(pdev, addr,
+ dma_sync_single_for_device(&pdev->dev, addr,
pkt_size, PCI_DMA_FROMDEVICE);
rtl8169_mark_to_asic(desc, tp->rx_buf_sz);
} else {
- pci_unmap_single(pdev, addr, tp->rx_buf_sz,
+ dma_unmap_single(&pdev->dev, addr, tp->rx_buf_sz,
PCI_DMA_FROMDEVICE);
tp->Rx_skbuff[entry] = NULL;
}
count = cur_rx - tp->cur_rx;
tp->cur_rx = cur_rx;
- delta = rtl8169_rx_fill(tp, dev, tp->dirty_rx, tp->cur_rx);
+ delta = rtl8169_rx_fill(tp, dev, tp->dirty_rx, tp->cur_rx, GFP_ATOMIC);
if (!delta && count)
netif_info(tp, intr, dev, "no Rx buffer allocated\n");
tp->dirty_rx += delta;
free_irq(dev->irq, dev);
- pci_free_consistent(pdev, R8169_RX_RING_BYTES, tp->RxDescArray,
- tp->RxPhyAddr);
- pci_free_consistent(pdev, R8169_TX_RING_BYTES, tp->TxDescArray,
- tp->TxPhyAddr);
+ dma_free_coherent(&pdev->dev, R8169_RX_RING_BYTES, tp->RxDescArray,
+ tp->RxPhyAddr);
+ dma_free_coherent(&pdev->dev, R8169_TX_RING_BYTES, tp->TxDescArray,
+ tp->TxPhyAddr);
tp->TxDescArray = NULL;
tp->RxDescArray = NULL;
free_pages((unsigned long)rionet_active, rdev->net->hport->sys_size ?
__ilog2(sizeof(void *)) + 4 : 0);
unregister_netdev(ndev);
- kfree(ndev);
+ free_netdev(ndev);
list_for_each_entry_safe(peer, tmp, &rionet_peers, node) {
list_del(&peer->node);
err_out_free_page:
free_page((unsigned long) sp->srings);
err_out_free_dev:
- kfree(dev);
+ free_netdev(dev);
err_out:
return err;
#include <linux/seq_file.h>
#include <linux/mii.h>
#include <linux/slab.h>
+#include <linux/dmi.h>
#include <asm/irq.h>
#include "skge.h"
netif_info(skge, probe, skge->netdev, "addr %pM\n", dev->dev_addr);
}
+static int only_32bit_dma;
+
static int __devinit skge_probe(struct pci_dev *pdev,
const struct pci_device_id *ent)
{
pci_set_master(pdev);
- if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(64))) {
+ if (!only_32bit_dma && !pci_set_dma_mask(pdev, DMA_BIT_MASK(64))) {
using_dac = 1;
err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64));
} else if (!(err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32)))) {
.shutdown = skge_shutdown,
};
+static struct dmi_system_id skge_32bit_dma_boards[] = {
+ {
+ .ident = "Gigabyte nForce boards",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "Gigabyte Technology Co"),
+ DMI_MATCH(DMI_BOARD_NAME, "nForce"),
+ },
+ },
+ {}
+};
+
static int __init skge_init_module(void)
{
+ if (dmi_check_system(skge_32bit_dma_boards))
+ only_32bit_dma = 1;
skge_debug_init();
return pci_register_driver(&skge_driver);
}
MODULE_LICENSE("GPL");
MODULE_VERSION(SMSC_DRV_VERSION);
+MODULE_ALIAS("platform:smsc911x");
#if USE_DEBUG > 0
static int debug = 16;
desc_idx, *post_ptr);
drop_it_no_recycle:
/* Other statistics kept track of by card. */
- tp->net_stats.rx_dropped++;
+ tp->rx_dropped++;
goto next_pkt;
}
if (len > (tp->dev->mtu + ETH_HLEN) &&
skb->protocol != htons(ETH_P_8021Q)) {
dev_kfree_skb(skb);
- goto next_pkt;
+ goto drop_it_no_recycle;
}
if (desc->type_flags & RXD_FLAG_VLAN &&
stats->rx_missed_errors = old_stats->rx_missed_errors +
get_stat64(&hw_stats->rx_discards);
+ stats->rx_dropped = tp->rx_dropped;
+
return stats;
}
/* begin "everything else" cacheline(s) section */
- struct rtnl_link_stats64 net_stats;
+ unsigned long rx_dropped;
struct rtnl_link_stats64 net_stats_prev;
struct tg3_ethtool_stats estats;
struct tg3_ethtool_stats estats_prev;
NWayState = (1 << 14) | (1 << 13) | (1 << 12),
NWayRestart = (1 << 12),
NonselPortActive = (1 << 9),
+ SelPortActive = (1 << 8),
LinkFailStatus = (1 << 2),
NetCxnErr = (1 << 1),
};
/* 21041 transceiver register settings: TP AUTO, BNC, AUI, TP, TP FD*/
static u16 t21041_csr13[] = { 0xEF01, 0xEF09, 0xEF09, 0xEF01, 0xEF09, };
-static u16 t21041_csr14[] = { 0xFFFF, 0xF7FD, 0xF7FD, 0x6F3F, 0x6F3D, };
+static u16 t21041_csr14[] = { 0xFFFF, 0xF7FD, 0xF7FD, 0x7F3F, 0x7F3D, };
+/* If on-chip autonegotiation is broken, use half-duplex (FF3F) instead */
+static u16 t21041_csr14_brk[] = { 0xFF3F, 0xF7FD, 0xF7FD, 0x7F3F, 0x7F3D, };
static u16 t21041_csr15[] = { 0x0008, 0x0006, 0x000E, 0x0008, 0x0008, };
unsigned int carrier;
unsigned long flags;
+ /* clear port active bits */
+ dw32(SIAStatus, NonselPortActive | SelPortActive);
+
carrier = (status & NetCxnErr) ? 0 : 1;
if (carrier) {
static void de_media_interrupt (struct de_private *de, u32 status)
{
if (status & LinkPass) {
+ /* Ignore if current media is AUI or BNC and we can't use TP */
+ if ((de->media_type == DE_MEDIA_AUI ||
+ de->media_type == DE_MEDIA_BNC) &&
+ (de->media_lock ||
+ !de_ok_to_advertise(de, DE_MEDIA_TP_AUTO)))
+ return;
+ /* If current media is not TP, change it to TP */
+ if ((de->media_type == DE_MEDIA_AUI ||
+ de->media_type == DE_MEDIA_BNC)) {
+ de->media_type = DE_MEDIA_TP_AUTO;
+ de_stop_rxtx(de);
+ de_set_media(de);
+ de_start_rxtx(de);
+ }
de_link_up(de);
mod_timer(&de->media_timer, jiffies + DE_TIMER_LINK);
return;
}
BUG_ON(!(status & LinkFail));
-
- if (netif_carrier_ok(de->dev)) {
+ /* Mark the link as down only if current media is TP */
+ if (netif_carrier_ok(de->dev) && de->media_type != DE_MEDIA_AUI &&
+ de->media_type != DE_MEDIA_BNC) {
de_link_down(de);
mod_timer(&de->media_timer, jiffies + DE_TIMER_NO_LINK);
}
if (de->de21040)
return;
+ dw32(CSR13, 0); /* Reset phy */
pci_read_config_dword(de->pdev, PCIPM, &pmctl);
pmctl |= PM_Sleep;
pci_write_config_dword(de->pdev, PCIPM, pmctl);
return 0; /* nothing to change */
de_link_down(de);
+ mod_timer(&de->media_timer, jiffies + DE_TIMER_NO_LINK);
de_stop_rxtx(de);
de->media_type = new_media;
de->media_lock = media_lock;
de->media_advertise = ecmd->advertising;
de_set_media(de);
+ if (netif_running(de->dev))
+ de_start_rxtx(de);
return 0;
}
for (i = 0; i < DE_MAX_MEDIA; i++) {
if (de->media[i].csr13 == 0xffff)
de->media[i].csr13 = t21041_csr13[i];
- if (de->media[i].csr14 == 0xffff)
- de->media[i].csr14 = t21041_csr14[i];
+ if (de->media[i].csr14 == 0xffff) {
+ /* autonegotiation is broken at least on some chip
+ revisions - rev. 0x21 works, 0x11 does not */
+ if (de->pdev->revision < 0x20)
+ de->media[i].csr14 = t21041_csr14_brk[i];
+ else
+ de->media[i].csr14 = t21041_csr14[i];
+ }
if (de->media[i].csr15 == 0xffff)
de->media[i].csr15 = t21041_csr15[i];
}
dev_err(&dev->dev, "pci_enable_device failed in resume\n");
goto out;
}
+ pci_set_master(pdev);
+ de_init_rings(de);
de_init_hw(de);
out_attach:
netif_device_attach(dev);
int i, result;
struct device *dev = i2400m_dev(i2400m);
const struct i2400m_msg_hdr *msg_hdr;
- size_t pl_itr, pl_size, skb_len;
+ size_t pl_itr, pl_size;
unsigned long flags;
- unsigned num_pls, single_last;
+ unsigned num_pls, single_last, skb_len;
skb_len = skb->len;
- d_fnstart(4, dev, "(i2400m %p skb %p [size %zu])\n",
+ d_fnstart(4, dev, "(i2400m %p skb %p [size %u])\n",
i2400m, skb, skb_len);
result = -EIO;
msg_hdr = (void *) skb->data;
- result = i2400m_rx_msg_hdr_check(i2400m, msg_hdr, skb->len);
+ result = i2400m_rx_msg_hdr_check(i2400m, msg_hdr, skb_len);
if (result < 0)
goto error_msg_hdr_check;
result = -EIO;
pl_itr = sizeof(*msg_hdr) + /* Check payload descriptor(s) */
num_pls * sizeof(msg_hdr->pld[0]);
pl_itr = ALIGN(pl_itr, I2400M_PL_ALIGN);
- if (pl_itr > skb->len) { /* got all the payload descriptors? */
+ if (pl_itr > skb_len) { /* got all the payload descriptors? */
dev_err(dev, "RX: HW BUG? message too short (%u bytes) for "
"%u payload descriptors (%zu each, total %zu)\n",
- skb->len, num_pls, sizeof(msg_hdr->pld[0]), pl_itr);
+ skb_len, num_pls, sizeof(msg_hdr->pld[0]), pl_itr);
goto error_pl_descr_short;
}
/* Walk each payload payload--check we really got it */
/* work around old gcc warnings */
pl_size = i2400m_pld_size(&msg_hdr->pld[i]);
result = i2400m_rx_pl_descr_check(i2400m, &msg_hdr->pld[i],
- pl_itr, skb->len);
+ pl_itr, skb_len);
if (result < 0)
goto error_pl_descr_check;
single_last = num_pls == 1 || i == num_pls - 1;
if (i < i2400m->rx_pl_min)
i2400m->rx_pl_min = i;
i2400m->rx_num++;
- i2400m->rx_size_acc += skb->len;
- if (skb->len < i2400m->rx_size_min)
- i2400m->rx_size_min = skb->len;
- if (skb->len > i2400m->rx_size_max)
- i2400m->rx_size_max = skb->len;
+ i2400m->rx_size_acc += skb_len;
+ if (skb_len < i2400m->rx_size_min)
+ i2400m->rx_size_min = skb_len;
+ if (skb_len > i2400m->rx_size_max)
+ i2400m->rx_size_max = skb_len;
spin_unlock_irqrestore(&i2400m->rx_lock, flags);
error_pl_descr_check:
error_pl_descr_short:
error_msg_hdr_check:
- d_fnend(4, dev, "(i2400m %p skb %p [size %zu]) = %d\n",
+ d_fnend(4, dev, "(i2400m %p skb %p [size %u]) = %d\n",
i2400m, skb, skb_len, result);
return result;
}
if (conf_is_ht40(conf))
return clockrate * 2;
- return clockrate * 2;
+ return clockrate;
}
static int32_t ath9k_hw_ani_get_listen_time(struct ath_hw *ah)
clear_bit(STATUS_SCAN_HW, &priv->status);
clear_bit(STATUS_SCANNING, &priv->status);
/* inform mac80211 scan aborted */
- queue_work(priv->workqueue, &priv->scan_completed);
+ queue_work(priv->workqueue, &priv->abort_scan);
}
int iwlagn_manage_ibss_station(struct iwl_priv *priv,
if (test_bit(STATUS_EXIT_PENDING, &priv->status))
return -EINVAL;
+ if (test_bit(STATUS_SCANNING, &priv->status)) {
+ IWL_DEBUG_INFO(priv, "scan in progress.\n");
+ return -EINVAL;
+ }
+
if (mode >= IWL_MAX_FORCE_RESET) {
IWL_DEBUG_INFO(priv, "invalid reset request.\n");
return -EINVAL;
clear_bit(STATUS_SCANNING, &priv->status);
/* inform mac80211 scan aborted */
- queue_work(priv->workqueue, &priv->scan_completed);
+ queue_work(priv->workqueue, &priv->abort_scan);
}
static void iwl3945_bg_restart(struct work_struct *data)
#define DMA_32BIT_PFN IOVA_PFN(DMA_BIT_MASK(32))
#define DMA_64BIT_PFN IOVA_PFN(DMA_BIT_MASK(64))
+/* page table handling */
+#define LEVEL_STRIDE (9)
+#define LEVEL_MASK (((u64)1 << LEVEL_STRIDE) - 1)
+
+static inline int agaw_to_level(int agaw)
+{
+ return agaw + 2;
+}
+
+static inline int agaw_to_width(int agaw)
+{
+ return 30 + agaw * LEVEL_STRIDE;
+}
+
+static inline int width_to_agaw(int width)
+{
+ return (width - 30) / LEVEL_STRIDE;
+}
+
+static inline unsigned int level_to_offset_bits(int level)
+{
+ return (level - 1) * LEVEL_STRIDE;
+}
+
+static inline int pfn_level_offset(unsigned long pfn, int level)
+{
+ return (pfn >> level_to_offset_bits(level)) & LEVEL_MASK;
+}
+
+static inline unsigned long level_mask(int level)
+{
+ return -1UL << level_to_offset_bits(level);
+}
+
+static inline unsigned long level_size(int level)
+{
+ return 1UL << level_to_offset_bits(level);
+}
+
+static inline unsigned long align_to_level(unsigned long pfn, int level)
+{
+ return (pfn + level_size(level) - 1) & level_mask(level);
+}
/* VT-d pages must always be _smaller_ than MM pages. Otherwise things
are never going to work. */
}
-static inline int width_to_agaw(int width);
-
static int __iommu_calculate_agaw(struct intel_iommu *iommu, int max_gaw)
{
unsigned long sagaw;
spin_unlock_irqrestore(&iommu->lock, flags);
}
-/* page table handling */
-#define LEVEL_STRIDE (9)
-#define LEVEL_MASK (((u64)1 << LEVEL_STRIDE) - 1)
-
-static inline int agaw_to_level(int agaw)
-{
- return agaw + 2;
-}
-
-static inline int agaw_to_width(int agaw)
-{
- return 30 + agaw * LEVEL_STRIDE;
-
-}
-
-static inline int width_to_agaw(int width)
-{
- return (width - 30) / LEVEL_STRIDE;
-}
-
-static inline unsigned int level_to_offset_bits(int level)
-{
- return (level - 1) * LEVEL_STRIDE;
-}
-
-static inline int pfn_level_offset(unsigned long pfn, int level)
-{
- return (pfn >> level_to_offset_bits(level)) & LEVEL_MASK;
-}
-
-static inline unsigned long level_mask(int level)
-{
- return -1UL << level_to_offset_bits(level);
-}
-
-static inline unsigned long level_size(int level)
-{
- return 1UL << level_to_offset_bits(level);
-}
-
-static inline unsigned long align_to_level(unsigned long pfn, int level)
-{
- return (pfn + level_size(level) - 1) & level_mask(level);
-}
-
static struct dma_pte *pfn_to_dma_pte(struct dmar_domain *domain,
unsigned long pfn)
{
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x2a40, quirk_iommu_rwbf);
+#define GGC 0x52
+#define GGC_MEMORY_SIZE_MASK (0xf << 8)
+#define GGC_MEMORY_SIZE_NONE (0x0 << 8)
+#define GGC_MEMORY_SIZE_1M (0x1 << 8)
+#define GGC_MEMORY_SIZE_2M (0x3 << 8)
+#define GGC_MEMORY_VT_ENABLED (0x8 << 8)
+#define GGC_MEMORY_SIZE_2M_VT (0x9 << 8)
+#define GGC_MEMORY_SIZE_3M_VT (0xa << 8)
+#define GGC_MEMORY_SIZE_4M_VT (0xb << 8)
+
+static void __devinit quirk_calpella_no_shadow_gtt(struct pci_dev *dev)
+{
+ unsigned short ggc;
+
+ if (pci_read_config_word(dev, GGC, &ggc))
+ return;
+
+ if (!(ggc & GGC_MEMORY_VT_ENABLED)) {
+ printk(KERN_INFO "DMAR: BIOS has allocated no shadow GTT; disabling IOMMU for graphics\n");
+ dmar_map_gfx = 0;
+ }
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x0040, quirk_calpella_no_shadow_gtt);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x0044, quirk_calpella_no_shadow_gtt);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x0062, quirk_calpella_no_shadow_gtt);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x006a, quirk_calpella_no_shadow_gtt);
+
/* On Tylersburg chipsets, some BIOSes have been known to enable the
ISOCH DMAR unit for the Azalia sound device, but not give it any
TLB entries, which causes it to deadlock. Check for that. We do
* the VF BAR size multiplied by the number of VFs. The alignment
* is just the VF BAR size.
*/
-int pci_sriov_resource_alignment(struct pci_dev *dev, int resno)
+resource_size_t pci_sriov_resource_alignment(struct pci_dev *dev, int resno)
{
struct resource tmp;
enum pci_bar_type type;
extern void pci_iov_release(struct pci_dev *dev);
extern int pci_iov_resource_bar(struct pci_dev *dev, int resno,
enum pci_bar_type *type);
-extern int pci_sriov_resource_alignment(struct pci_dev *dev, int resno);
+extern resource_size_t pci_sriov_resource_alignment(struct pci_dev *dev,
+ int resno);
extern void pci_restore_iov_state(struct pci_dev *dev);
extern int pci_iov_bus_range(struct pci_bus *bus);
}
#endif /* CONFIG_PCI_IOV */
-static inline int pci_resource_alignment(struct pci_dev *dev,
+static inline resource_size_t pci_resource_alignment(struct pci_dev *dev,
struct resource *res)
{
#ifdef CONFIG_PCI_IOV
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_CBUS_2, quirk_isa_dma_hangs);
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_CBUS_3, quirk_isa_dma_hangs);
+/*
+ * Intel NM10 "TigerPoint" LPC PM1a_STS.BM_STS must be clear
+ * for some HT machines to use C4 w/o hanging.
+ */
+static void __devinit quirk_tigerpoint_bm_sts(struct pci_dev *dev)
+{
+ u32 pmbase;
+ u16 pm1a;
+
+ pci_read_config_dword(dev, 0x40, &pmbase);
+ pmbase = pmbase & 0xff80;
+ pm1a = inw(pmbase);
+
+ if (pm1a & 0x10) {
+ dev_info(&dev->dev, FW_BUG "TigerPoint LPC.BM_STS cleared\n");
+ outw(0x10, pmbase);
+ }
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_TGP_LPC, quirk_tigerpoint_bm_sts);
+
/*
* Chipsets where PCI->PCI transfers vanish or hang
*/
if (c->io[1].end) {
ret = alloc_io_space(s, &c->io[1], p_dev->io_lines);
if (ret) {
+ struct resource tmp = c->io[0];
+ /* release the previously allocated resource */
release_io_space(s, &c->io[0]);
+ /* but preserve the settings, for they worked... */
+ c->io[0].end = resource_size(&tmp);
+ c->io[0].start = tmp.start;
+ c->io[0].flags = tmp.flags;
goto out;
}
} else
if (!pci_resource_start(dev, 0)) {
dev_warn(&dev->dev, "refusing to load the driver as the "
"io_base is NULL.\n");
- goto err_out_free_mem;
+ goto err_out_disable;
}
dev_info(&dev->dev, "Cirrus PD6729 PCI to PCMCIA Bridge at 0x%llx "
* TODO:
* - handle CPU hotplug
* - provide turbo enable/disable api
- * - make sure we can write turbo enable/disable reg based on MISC_EN
*
* Related documents:
* - CDI 403777, 403778 - Auburndale EDS vol 1 & 2
#define THM_TC2 0xac
#define THM_DTV 0xb0
#define THM_ITV 0xd8
-#define ITV_ME_SEQNO_MASK 0x000f0000 /* ME should update every ~200ms */
+#define ITV_ME_SEQNO_MASK 0x00ff0000 /* ME should update every ~200ms */
#define ITV_ME_SEQNO_SHIFT (16)
#define ITV_MCH_TEMP_MASK 0x0000ff00
#define ITV_MCH_TEMP_SHIFT (8)
bool gpu_preferred;
bool poll_turbo_status;
bool second_cpu;
+ bool turbo_toggle_allowed;
struct ips_mcp_limits *limits;
/* Optional MCH interfaces for if i915 is in use */
new_limit = cur_limit - 8; /* 1W decrease */
/* Clamp to SKU TDP limit */
- if (((new_limit * 10) / 8) < (ips->orig_turbo_limit & TURBO_TDP_MASK))
+ if (new_limit < (ips->orig_turbo_limit & TURBO_TDP_MASK))
new_limit = ips->orig_turbo_limit & TURBO_TDP_MASK;
thm_writew(THM_MPCPC, (new_limit * 10) / 8);
if (ips->__cpu_turbo_on)
return;
- on_each_cpu(do_enable_cpu_turbo, ips, 1);
+ if (ips->turbo_toggle_allowed)
+ on_each_cpu(do_enable_cpu_turbo, ips, 1);
ips->__cpu_turbo_on = true;
}
if (!ips->__cpu_turbo_on)
return;
- on_each_cpu(do_disable_cpu_turbo, ips, 1);
+ if (ips->turbo_toggle_allowed)
+ on_each_cpu(do_disable_cpu_turbo, ips, 1);
ips->__cpu_turbo_on = false;
}
{
unsigned long flags;
bool ret = false;
+ u32 temp_limit;
+ u32 avg_power;
+ const char *msg = "MCP limit exceeded: ";
spin_lock_irqsave(&ips->turbo_status_lock, flags);
- if (ips->mcp_avg_temp > (ips->mcp_temp_limit * 100))
- ret = true;
- if (ips->cpu_avg_power + ips->mch_avg_power > ips->mcp_power_limit)
+
+ temp_limit = ips->mcp_temp_limit * 100;
+ if (ips->mcp_avg_temp > temp_limit) {
+ dev_info(&ips->dev->dev,
+ "%sAvg temp %u, limit %u\n", msg, ips->mcp_avg_temp,
+ temp_limit);
ret = true;
- spin_unlock_irqrestore(&ips->turbo_status_lock, flags);
+ }
- if (ret)
+ avg_power = ips->cpu_avg_power + ips->mch_avg_power;
+ if (avg_power > ips->mcp_power_limit) {
dev_info(&ips->dev->dev,
- "MCP power or thermal limit exceeded\n");
+ "%sAvg power %u, limit %u\n", msg, avg_power,
+ ips->mcp_power_limit);
+ ret = true;
+ }
+
+ spin_unlock_irqrestore(&ips->turbo_status_lock, flags);
return ret;
}
return ret;
}
+/**
+ * verify_limits - verify BIOS provided limits
+ * @ips: IPS structure
+ *
+ * BIOS can optionally provide non-default limits for power and temp. Check
+ * them here and use the defaults if the BIOS values are not provided or
+ * are otherwise unusable.
+ */
+static void verify_limits(struct ips_driver *ips)
+{
+ if (ips->mcp_power_limit < ips->limits->mcp_power_limit ||
+ ips->mcp_power_limit > 35000)
+ ips->mcp_power_limit = ips->limits->mcp_power_limit;
+
+ if (ips->mcp_temp_limit < ips->limits->core_temp_limit ||
+ ips->mcp_temp_limit < ips->limits->mch_temp_limit ||
+ ips->mcp_temp_limit > 150)
+ ips->mcp_temp_limit = min(ips->limits->core_temp_limit,
+ ips->limits->mch_temp_limit);
+}
+
/**
* update_turbo_limits - get various limits & settings from regs
* @ips: IPS driver struct
u32 hts = thm_readl(THM_HTS);
ips->cpu_turbo_enabled = !(hts & HTS_PCTD_DIS);
- ips->gpu_turbo_enabled = !(hts & HTS_GTD_DIS);
+ /*
+ * Disable turbo for now, until we can figure out why the power figures
+ * are wrong
+ */
+ ips->cpu_turbo_enabled = false;
+
+ if (ips->gpu_busy)
+ ips->gpu_turbo_enabled = !(hts & HTS_GTD_DIS);
+
ips->core_power_limit = thm_readw(THM_MPCPC);
ips->mch_power_limit = thm_readw(THM_MMGPC);
ips->mcp_temp_limit = thm_readw(THM_PTL);
ips->mcp_power_limit = thm_readw(THM_MPPC);
+ verify_limits(ips);
/* Ignore BIOS CPU vs GPU pref */
}
ret = (ret * 1000) / 65535;
*last = val;
- return ret;
+ return 0;
}
static const u16 temp_decay_factor = 2;
kfree(mch_samples);
kfree(cpu_samples);
kfree(mchp_samples);
- kthread_stop(ips->adjust);
return -ENOMEM;
}
ITV_ME_SEQNO_SHIFT;
seqno_timestamp = get_jiffies_64();
- old_cpu_power = thm_readl(THM_CEC) / 65535;
+ old_cpu_power = thm_readl(THM_CEC);
schedule_timeout_interruptible(msecs_to_jiffies(IPS_SAMPLE_PERIOD));
/* Collect an initial average */
STS_GPL_SHIFT;
/* ignore EC CPU vs GPU pref */
ips->cpu_turbo_enabled = !(sts & STS_PCTD_DIS);
- ips->gpu_turbo_enabled = !(sts & STS_GTD_DIS);
+ /*
+ * Disable turbo for now, until we can figure
+ * out why the power figures are wrong
+ */
+ ips->cpu_turbo_enabled = false;
+ if (ips->gpu_busy)
+ ips->gpu_turbo_enabled = !(sts & STS_GTD_DIS);
ips->mcp_temp_limit = (sts & STS_PTL_MASK) >>
STS_PTL_SHIFT;
ips->mcp_power_limit = (tc1 & STS_PPL_MASK) >>
STS_PPL_SHIFT;
+ verify_limits(ips);
spin_unlock(&ips->turbo_status_lock);
thm_writeb(THM_SEC, SEC_ACK);
* turbo manually or we'll get an illegal MSR access, even though
* turbo will still be available.
*/
- if (!(misc_en & IA32_MISC_TURBO_EN))
- ; /* add turbo MSR write allowed flag if necessary */
+ if (misc_en & IA32_MISC_TURBO_EN)
+ ips->turbo_toggle_allowed = true;
+ else
+ ips->turbo_toggle_allowed = false;
if (strstr(boot_cpu_data.x86_model_id, "CPU M"))
limits = &ips_sv_limits;
tdp = turbo_power & TURBO_TDP_MASK;
/* Sanity check TDP against CPU */
- if (limits->mcp_power_limit != (tdp / 8) * 1000) {
- dev_warn(&ips->dev->dev, "Warning: CPU TDP doesn't match expected value (found %d, expected %d)\n",
- tdp / 8, limits->mcp_power_limit / 1000);
+ if (limits->core_power_limit != (tdp / 8) * 1000) {
+ dev_info(&ips->dev->dev, "CPU TDP doesn't match expected value (found %d, expected %d)\n",
+ tdp / 8, limits->core_power_limit / 1000);
+ limits->core_power_limit = (tdp / 8) * 1000;
}
out:
return true;
out_put_busy:
- symbol_put(i915_gpu_turbo_disable);
+ symbol_put(i915_gpu_busy);
out_put_lower:
symbol_put(i915_gpu_lower);
out_put_raise:
/* Save turbo limits & ratios */
rdmsrl(TURBO_POWER_CURRENT_LIMIT, ips->orig_turbo_limit);
- ips_enable_cpu_turbo(ips);
- ips->cpu_turbo_enabled = true;
+ ips_disable_cpu_turbo(ips);
+ ips->cpu_turbo_enabled = false;
- /* Set up the work queue and monitor/adjust threads */
- ips->monitor = kthread_run(ips_monitor, ips, "ips-monitor");
- if (IS_ERR(ips->monitor)) {
+ /* Create thermal adjust thread */
+ ips->adjust = kthread_create(ips_adjust, ips, "ips-adjust");
+ if (IS_ERR(ips->adjust)) {
dev_err(&dev->dev,
- "failed to create thermal monitor thread, aborting\n");
+ "failed to create thermal adjust thread, aborting\n");
ret = -ENOMEM;
goto error_free_irq;
+
}
- ips->adjust = kthread_create(ips_adjust, ips, "ips-adjust");
- if (IS_ERR(ips->adjust)) {
+ /*
+ * Set up the work queue and monitor thread. The monitor thread
+ * will wake up ips_adjust thread.
+ */
+ ips->monitor = kthread_run(ips_monitor, ips, "ips-monitor");
+ if (IS_ERR(ips->monitor)) {
dev_err(&dev->dev,
- "failed to create thermal adjust thread, aborting\n");
+ "failed to create thermal monitor thread, aborting\n");
ret = -ENOMEM;
goto error_thread_cleanup;
}
return ret;
error_thread_cleanup:
- kthread_stop(ips->monitor);
+ kthread_stop(ips->adjust);
error_free_irq:
free_irq(ips->dev->irq, ips);
error_unmap:
TPACPI_Q_IBM('1', 'D', TPACPI_HK_Q_INIMASK), /* X22, X23, X24 */
};
-typedef u16 tpacpi_keymap_t[TPACPI_HOTKEY_MAP_LEN];
+typedef u16 tpacpi_keymap_entry_t;
+typedef tpacpi_keymap_entry_t tpacpi_keymap_t[TPACPI_HOTKEY_MAP_LEN];
static int __init hotkey_init(struct ibm_init_struct *iibm)
{
};
#define TPACPI_HOTKEY_MAP_SIZE sizeof(tpacpi_keymap_t)
-#define TPACPI_HOTKEY_MAP_TYPESIZE sizeof(tpacpi_keymap_t[0])
+#define TPACPI_HOTKEY_MAP_TYPESIZE sizeof(tpacpi_keymap_entry_t)
int res, i;
int status;
#define PNP_EISA_ID_MASK 0x7fffffff
void pnp_eisa_id_to_string(u32 id, char *str);
-struct pnp_dev *pnp_alloc_dev(struct pnp_protocol *, int id, char *pnpid);
+struct pnp_dev *pnp_alloc_dev(struct pnp_protocol *, int id,
+ const char *pnpid);
struct pnp_card *pnp_alloc_card(struct pnp_protocol *, int id, char *pnpid);
int pnp_add_device(struct pnp_dev *dev);
-struct pnp_id *pnp_add_id(struct pnp_dev *dev, char *id);
+struct pnp_id *pnp_add_id(struct pnp_dev *dev, const char *id);
int pnp_add_card(struct pnp_card *card);
void pnp_remove_card(struct pnp_card *card);
kfree(dev);
}
-struct pnp_dev *pnp_alloc_dev(struct pnp_protocol *protocol, int id, char *pnpid)
+struct pnp_dev *pnp_alloc_dev(struct pnp_protocol *protocol, int id,
+ const char *pnpid)
{
struct pnp_dev *dev;
struct pnp_id *dev_id;
* @dev: pointer to the desired device
* @id: pointer to an EISA id string
*/
-struct pnp_id *pnp_add_id(struct pnp_dev *dev, char *id)
+struct pnp_id *pnp_add_id(struct pnp_dev *dev, const char *id)
{
struct pnp_id *dev_id, *ptr;
#define TEST_ALPHA(c) \
if (!('@' <= (c) || (c) <= 'Z')) \
return 0
-static int __init ispnpidacpi(char *id)
+static int __init ispnpidacpi(const char *id)
{
TEST_ALPHA(id[0]);
TEST_ALPHA(id[1]);
regulator_unregister(chip->rdev);
kfree(chip);
- i2c_set_clientdata(client, NULL);
return 0;
}
constraints->min_uA != constraints->max_uA) {
ret = _regulator_get_current_limit(rdev);
if (ret > 0)
- count += sprintf(buf + count, "at %d uA ", ret / 1000);
+ count += sprintf(buf + count, "at %d mA ", ret / 1000);
}
if (constraints->valid_modes_mask & REGULATOR_MODE_FAST)
dev_set_name(&rdev->dev, "regulator.%d",
atomic_inc_return(®ulator_no) - 1);
ret = device_register(&rdev->dev);
- if (ret != 0)
+ if (ret != 0) {
+ put_device(&rdev->dev);
goto clean;
+ }
dev_set_drvdata(&rdev->dev, rdev);
struct isl_pmic *pmic = i2c_get_clientdata(i2c);
int i;
- i2c_set_clientdata(i2c, NULL);
-
for (i = 0; i < 3; i++)
regulator_unregister(pmic->rdev[i]);
/* set external clock frequency */
info->extclk_freq = pdata->extclk_freq;
max8649_set_bits(info->i2c, MAX8649_SYNC, MAX8649_EXT_MASK,
- info->extclk_freq);
+ info->extclk_freq << 6);
}
if (pdata->ramp_timing) {
err = PTR_ERR(rtc);
return err;
}
+ platform_set_drvdata(pdev, rtc);
return 0;
}
struct rtc_device *rtc = platform_get_drvdata(pdev);
rtc_device_unregister(rtc);
+ platform_set_drvdata(pdev, NULL);
return 0;
}
free_irq(client->irq, client);
out_free:
- i2c_set_clientdata(client, NULL);
kfree(ds3232);
return ret;
}
}
rtc_device_unregister(ds3232->rtc);
- i2c_set_clientdata(client, NULL);
kfree(ds3232);
return 0;
}
s3c_rtc_setaie(alrm->enabled);
- if (alrm->enabled)
- enable_irq_wake(s3c_rtc_alarmno);
- else
- disable_irq_wake(s3c_rtc_alarmno);
-
return 0;
}
ticnt_en_save &= S3C64XX_RTCCON_TICEN;
}
s3c_rtc_enable(pdev, 0);
+
+ if (device_may_wakeup(&pdev->dev))
+ enable_irq_wake(s3c_rtc_alarmno);
+
return 0;
}
tmp = readb(s3c_rtc_base + S3C2410_RTCCON);
writeb(tmp | ticnt_en_save, s3c_rtc_base + S3C2410_RTCCON);
}
+
+ if (device_may_wakeup(&pdev->dev))
+ disable_irq_wake(s3c_rtc_alarmno);
+
return 0;
}
#else
dev_fsm, dev_fsm_len, GFP_KERNEL);
if (priv->fsm == NULL) {
CTCMY_DBF_DEV(SETUP, dev, "init_fsm error");
- kfree(dev);
+ free_netdev(dev);
return NULL;
}
fsm_newstate(priv->fsm, DEV_STATE_STOPPED);
grp = ctcmpc_init_mpc_group(priv);
if (grp == NULL) {
MPC_DBF_DEV(SETUP, dev, "init_mpc_group error");
- kfree(dev);
+ free_netdev(dev);
return NULL;
}
tasklet_init(&grp->mpc_tasklet2,
/* If the user actually wanted this page, we can skip the rest */
if (page == 0)
- return -EINVAL;
+ return 0;
for (i = 0; i < min((int)buf[3], buf_len - 4); i++)
if (buf[i + 4] == page)
goto found;
- if (i < buf[3] && i > buf_len)
+ if (i < buf[3] && i >= buf_len - 4)
/* ran off the end of the buffer, give us benefit of doubt */
goto found;
/* The device claims it doesn't support the requested page */
spin_unlock_irqrestore(&uap->port.lock, flags);
}
-static void pl010_set_ldisc(struct uart_port *port)
+static void pl010_set_ldisc(struct uart_port *port, int new)
{
- int line = port->line;
-
- if (line >= port->state->port.tty->driver->num)
- return;
-
- if (port->state->port.tty->ldisc->ops->num == N_PPS) {
+ if (new == N_PPS) {
port->flags |= UPF_HARDPPS_CD;
pl010_enable_ms(port);
} else
if (!port) {
printk(KERN_WARNING
"IOC3 serial memory not available for port\n");
+ ret = -ENOMEM;
goto out4;
}
spin_lock_init(&port->ip_lock);
#include <linux/init.h>
#include <linux/console.h>
#include <linux/sysrq.h>
+#include <linux/slab.h>
#include <linux/serial_reg.h>
#include <linux/circ_buf.h>
#include <linux/delay.h>
}
phsu = hsu;
-
hsu_debugfs_init(hsu);
return;
static void serial_hsu_remove(struct pci_dev *pdev)
{
- struct hsu_port *hsu;
- int i;
+ void *priv = pci_get_drvdata(pdev);
+ struct uart_hsu_port *up;
- hsu = pci_get_drvdata(pdev);
- if (!hsu)
+ if (!priv)
return;
- for (i = 0; i < 3; i++)
- uart_remove_one_port(&serial_hsu_reg, &hsu->port[i].port);
+ /* For port 0/1/2, priv is the address of uart_hsu_port */
+ if (pdev->device != 0x081E) {
+ up = priv;
+ uart_remove_one_port(&serial_hsu_reg, &up->port);
+ }
pci_set_drvdata(pdev, NULL);
- free_irq(hsu->irq, hsu);
+ free_irq(pdev->irq, priv);
pci_disable_device(pdev);
}
#include <linux/module.h>
#include <linux/ioport.h>
+#include <linux/irq.h>
#include <linux/init.h>
#include <linux/console.h>
#include <linux/sysrq.h>
#include <linux/init.h>
#include <linux/cache.h>
#include <linux/mutex.h>
+#include <linux/of_device.h>
#include <linux/slab.h>
#include <linux/mod_devicetable.h>
#include <linux/spi/spi.h>
const struct spi_device *spi = to_spi_device(dev);
const struct spi_driver *sdrv = to_spi_driver(drv);
+ /* Attempt an OF style match */
+ if (of_driver_match_device(dev, drv))
+ return 1;
+
if (sdrv->id_table)
return !!spi_match_id(sdrv->id_table, spi);
spi_gpio->bitbang.master = spi_master_get(master);
spi_gpio->bitbang.chipselect = spi_gpio_chipselect;
- if ((master_flags & (SPI_MASTER_NO_RX | SPI_MASTER_NO_RX)) == 0) {
+ if ((master_flags & (SPI_MASTER_NO_TX | SPI_MASTER_NO_RX)) == 0) {
spi_gpio->bitbang.txrx_word[SPI_MODE_0] = spi_gpio_txrx_word_mode0;
spi_gpio->bitbang.txrx_word[SPI_MODE_1] = spi_gpio_txrx_word_mode1;
spi_gpio->bitbang.txrx_word[SPI_MODE_2] = spi_gpio_txrx_word_mode2;
xfer_ofs = mspi->xfer_in_progress->len - mspi->count;
- out_be32(&rx_bd->cbd_bufaddr, mspi->rx_dma + xfer_ofs);
+ if (mspi->rx_dma == mspi->dma_dummy_rx)
+ out_be32(&rx_bd->cbd_bufaddr, mspi->rx_dma);
+ else
+ out_be32(&rx_bd->cbd_bufaddr, mspi->rx_dma + xfer_ofs);
out_be16(&rx_bd->cbd_datlen, 0);
out_be16(&rx_bd->cbd_sc, BD_SC_EMPTY | BD_SC_INTRPT | BD_SC_WRAP);
- out_be32(&tx_bd->cbd_bufaddr, mspi->tx_dma + xfer_ofs);
+ if (mspi->tx_dma == mspi->dma_dummy_tx)
+ out_be32(&tx_bd->cbd_bufaddr, mspi->tx_dma);
+ else
+ out_be32(&tx_bd->cbd_bufaddr, mspi->tx_dma + xfer_ofs);
out_be16(&tx_bd->cbd_datlen, xfer_len);
out_be16(&tx_bd->cbd_sc, BD_SC_READY | BD_SC_INTRPT | BD_SC_WRAP |
BD_SC_LAST);
#include "hash.h"
#include <linux/if_arp.h>
-#include <linux/netfilter_bridge.h>
#define MIN(x, y) ((x) < (y) ? (x) : (y))
return NOTIFY_DONE;
}
-static int batman_skb_recv_finish(struct sk_buff *skb)
-{
- return NF_ACCEPT;
-}
-
/* receive a packet with the batman ethertype coming on a hard
* interface */
int batman_skb_recv(struct sk_buff *skb, struct net_device *dev,
if (atomic_read(&module_state) != MODULE_ACTIVE)
goto err_free;
- /* if netfilter/ebtables wants to block incoming batman
- * packets then give them a chance to do so here */
- ret = NF_HOOK(PF_BRIDGE, NF_BR_LOCAL_IN, skb, dev, NULL,
- batman_skb_recv_finish);
- if (ret != 1)
- goto err_out;
-
/* packet should hold at least type and version */
if (unlikely(skb_headlen(skb) < 2))
goto err_free;
#include "vis.h"
#include "aggregation.h"
-#include <linux/netfilter_bridge.h>
static void send_outstanding_bcast_packet(struct work_struct *work);
/* dev_queue_xmit() returns a negative result on error. However on
* congestion and traffic shaping, it drops and returns NET_XMIT_DROP
- * (which is > 0). This will not be treated as an error.
- * Also, if netfilter/ebtables wants to block outgoing batman
- * packets then giving them a chance to do so here */
+ * (which is > 0). This will not be treated as an error. */
- return NF_HOOK(PF_BRIDGE, NF_BR_LOCAL_OUT, skb, NULL, skb->dev,
- dev_queue_xmit);
+ return dev_queue_xmit(skb);
send_skb_err:
kfree_skb(skb);
return NET_XMIT_DROP;
extern long st_register(struct st_proto_s *);
extern long st_unregister(enum proto_type);
-extern struct platform_device *st_get_plat_device(void);
#endif /* ST_H */
#include "st_ll.h"
#include "st.h"
-#define VERBOSE
/* strings to be used for rfkill entries and by
* ST Core to be used for sysfs debug entry
*/
long err = 0;
unsigned long flags = 0;
- st_kim_ref(&st_gdata);
+ st_kim_ref(&st_gdata, 0);
pr_info("%s(%d) ", __func__, new_proto->type);
if (st_gdata == NULL || new_proto == NULL || new_proto->recv == NULL
|| new_proto->reg_complete_cb == NULL) {
pr_debug("%s: %d ", __func__, type);
- st_kim_ref(&st_gdata);
+ st_kim_ref(&st_gdata, 0);
if (type < ST_BT || type >= ST_MAX) {
pr_err(" protocol %d not supported", type);
return -EPROTONOSUPPORT;
#endif
long len;
- st_kim_ref(&st_gdata);
+ st_kim_ref(&st_gdata, 0);
if (unlikely(skb == NULL || st_gdata == NULL
|| st_gdata->tty == NULL)) {
pr_err("data/tty unavailable to perform write");
struct st_data_s *st_gdata;
pr_info("%s ", __func__);
- st_kim_ref(&st_gdata);
+ st_kim_ref(&st_gdata, 0);
st_gdata->tty = tty;
tty->disc_data = st_gdata;
void st_core_exit(struct st_data_s *);
/* ask for reference from KIM */
-void st_kim_ref(struct st_data_s **);
+void st_kim_ref(struct st_data_s **, int);
#define GPS_STUB_TEST
#ifdef GPS_STUB_TEST
PROTO_ENTRY(ST_GPS, "GPS"),
};
+#define MAX_ST_DEVICES 3 /* Imagine 1 on each UART for now */
+struct platform_device *st_kim_devices[MAX_ST_DEVICES];
/**********************************************************************/
/* internal functions */
+/**
+ * st_get_plat_device -
+ * function which returns the reference to the platform device
+ * requested by id. As of now only 1 such device exists (id=0)
+ * the context requesting for reference can get the id to be
+ * requested by a. The protocol driver which is registering or
+ * b. the tty device which is opened.
+ */
+static struct platform_device *st_get_plat_device(int id)
+{
+ return st_kim_devices[id];
+}
+
/**
* validate_firmware_response -
* function to return whether the firmware response was proper
struct kim_data_s *kim_gdata;
pr_info(" %s ", __func__);
- kim_pdev = st_get_plat_device();
+ kim_pdev = st_get_plat_device(0);
kim_gdata = dev_get_drvdata(&kim_pdev->dev);
if (kim_gdata->gpios[type] == -1) {
* This would enable multiple such platform devices to exist
* on a given platform
*/
-void st_kim_ref(struct st_data_s **core_data)
+void st_kim_ref(struct st_data_s **core_data, int id)
{
struct platform_device *pdev;
struct kim_data_s *kim_gdata;
/* get kim_gdata reference from platform device */
- pdev = st_get_plat_device();
+ pdev = st_get_plat_device(id);
kim_gdata = dev_get_drvdata(&pdev->dev);
*core_data = kim_gdata->core_data;
}
long *gpios = pdev->dev.platform_data;
struct kim_data_s *kim_gdata;
+ st_kim_devices[pdev->id] = pdev;
kim_gdata = kzalloc(sizeof(struct kim_data_s), GFP_ATOMIC);
if (!kim_gdata) {
pr_err("no mem to allocate");
config VIDEO_TM6000
tristate "TV Master TM5600/6000/6010 driver"
- depends on VIDEO_DEV && I2C && INPUT && USB && EXPERIMENTAL
+ depends on VIDEO_DEV && I2C && INPUT && IR_CORE && USB && EXPERIMENTAL
select VIDEO_TUNER
select MEDIA_TUNER_XC2028
select MEDIA_TUNER_XC5000
}
struct tm6000_ir_poll_result {
- u8 rc_data[4];
+ u16 rc_data;
};
struct tm6000_IR {
int polling;
struct delayed_work work;
u8 wait:1;
+ u8 key:1;
struct urb *int_urb;
u8 *urb_data;
- u8 key:1;
int (*get_key) (struct tm6000_IR *, struct tm6000_ir_poll_result *);
if (urb->status != 0)
printk(KERN_INFO "not ready\n");
- else if (urb->actual_length > 0)
+ else if (urb->actual_length > 0) {
memcpy(ir->urb_data, urb->transfer_buffer, urb->actual_length);
- dprintk("data %02x %02x %02x %02x\n", ir->urb_data[0],
- ir->urb_data[1], ir->urb_data[2], ir->urb_data[3]);
+ dprintk("data %02x %02x %02x %02x\n", ir->urb_data[0],
+ ir->urb_data[1], ir->urb_data[2], ir->urb_data[3]);
- ir->key = 1;
+ ir->key = 1;
+ }
rc = usb_submit_urb(urb, GFP_ATOMIC);
}
int rc;
u8 buf[2];
- if (ir->wait && !&dev->int_in) {
- poll_result->rc_data[0] = 0xff;
+ if (ir->wait && !&dev->int_in)
return 0;
- }
if (&dev->int_in) {
- poll_result->rc_data[0] = ir->urb_data[0];
- poll_result->rc_data[1] = ir->urb_data[1];
+ if (ir->ir.ir_type == IR_TYPE_RC5)
+ poll_result->rc_data = ir->urb_data[0];
+ else
+ poll_result->rc_data = ir->urb_data[0] | ir->urb_data[1] << 8;
} else {
tm6000_set_reg(dev, REQ_04_EN_DISABLE_MCU_INT, 2, 0);
msleep(10);
tm6000_set_reg(dev, REQ_04_EN_DISABLE_MCU_INT, 2, 1);
msleep(10);
- rc = tm6000_read_write_usb(dev, USB_DIR_IN | USB_TYPE_VENDOR |
- USB_RECIP_DEVICE, REQ_02_GET_IR_CODE, 0, 0, buf, 1);
+ if (ir->ir.ir_type == IR_TYPE_RC5) {
+ rc = tm6000_read_write_usb(dev, USB_DIR_IN |
+ USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+ REQ_02_GET_IR_CODE, 0, 0, buf, 1);
- msleep(10);
+ msleep(10);
- dprintk("read data=%02x\n", buf[0]);
- if (rc < 0)
- return rc;
+ dprintk("read data=%02x\n", buf[0]);
+ if (rc < 0)
+ return rc;
- poll_result->rc_data[0] = buf[0];
+ poll_result->rc_data = buf[0];
+ } else {
+ rc = tm6000_read_write_usb(dev, USB_DIR_IN |
+ USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+ REQ_02_GET_IR_CODE, 0, 0, buf, 2);
+
+ msleep(10);
+
+ dprintk("read data=%04x\n", buf[0] | buf[1] << 8);
+ if (rc < 0)
+ return rc;
+
+ poll_result->rc_data = buf[0] | buf[1] << 8;
+ }
+ if ((poll_result->rc_data & 0x00ff) != 0xff)
+ ir->key = 1;
}
return 0;
}
return;
}
- dprintk("ir->get_key result data=%02x %02x\n",
- poll_result.rc_data[0], poll_result.rc_data[1]);
+ dprintk("ir->get_key result data=%04x\n", poll_result.rc_data);
- if (poll_result.rc_data[0] != 0xff && ir->key == 1) {
+ if (ir->key) {
ir_input_keydown(ir->input->input_dev, &ir->ir,
- poll_result.rc_data[0] | poll_result.rc_data[1] << 8);
+ (u32)poll_result.rc_data);
ir_input_nokey(ir->input->input_dev, &ir->ir);
ir->key = 0;
DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "wpa_ie_len = %d\n", param->u.wpa_associate.wpa_ie_len);
- if (param->u.wpa_associate.wpa_ie &&
- copy_from_user(&abyWPAIE[0], param->u.wpa_associate.wpa_ie, param->u.wpa_associate.wpa_ie_len))
- return -EINVAL;
+ if (param->u.wpa_associate.wpa_ie_len) {
+ if (!param->u.wpa_associate.wpa_ie)
+ return -EINVAL;
+ if (param->u.wpa_associate.wpa_ie_len > sizeof(abyWPAIE))
+ return -EINVAL;
+ if (copy_from_user(&abyWPAIE[0], param->u.wpa_associate.wpa_ie, param->u.wpa_associate.wpa_ie_len))
+ return -EFAULT;
+ }
if (param->u.wpa_associate.mode == 1)
pMgmt->eConfigMode = WMAC_CONFIG_IBSS_STA;
If you are unsure about this, say N here.
config USB_SUSPEND
- bool "USB runtime power management (suspend/resume and wakeup)"
+ bool "USB runtime power management (autosuspend) and wakeup"
depends on USB && PM_RUNTIME
help
If you say Y here, you can use driver calls or the sysfs
- "power/level" file to suspend or resume individual USB
- peripherals and to enable or disable autosuspend (see
+ "power/control" file to enable or disable autosuspend for
+ individual USB peripherals (see
Documentation/usb/power-management.txt for more details).
Also, USB "remote wakeup" signaling is supported, whereby some
int usb_register_dev(struct usb_interface *intf,
struct usb_class_driver *class_driver)
{
- int retval = -EINVAL;
+ int retval;
int minor_base = class_driver->minor_base;
- int minor = 0;
+ int minor;
char name[20];
char *temp;
*/
minor_base = 0;
#endif
- intf->minor = -1;
-
- dbg ("looking for a minor, starting at %d", minor_base);
if (class_driver->fops == NULL)
- goto exit;
+ return -EINVAL;
+ if (intf->minor >= 0)
+ return -EADDRINUSE;
+
+ retval = init_usb_class();
+ if (retval)
+ return retval;
+
+ dev_dbg(&intf->dev, "looking for a minor, starting at %d", minor_base);
down_write(&minor_rwsem);
for (minor = minor_base; minor < MAX_USB_MINORS; ++minor) {
continue;
usb_minors[minor] = class_driver->fops;
-
- retval = 0;
+ intf->minor = minor;
break;
}
up_write(&minor_rwsem);
-
- if (retval)
- goto exit;
-
- retval = init_usb_class();
- if (retval)
- goto exit;
-
- intf->minor = minor;
+ if (intf->minor < 0)
+ return -EXFULL;
/* create a usb class device for this usb interface */
snprintf(name, sizeof(name), class_driver->name, minor - minor_base);
"%s", temp);
if (IS_ERR(intf->usb_dev)) {
down_write(&minor_rwsem);
- usb_minors[intf->minor] = NULL;
+ usb_minors[minor] = NULL;
+ intf->minor = -1;
up_write(&minor_rwsem);
retval = PTR_ERR(intf->usb_dev);
}
-exit:
return retval;
}
EXPORT_SYMBOL_GPL(usb_register_dev);
intf->dev.groups = usb_interface_groups;
intf->dev.dma_mask = dev->dev.dma_mask;
INIT_WORK(&intf->reset_ws, __usb_queue_reset_device);
+ intf->minor = -1;
device_initialize(&intf->dev);
dev_set_name(&intf->dev, "%d-%s:%d.%d",
dev->bus->busnum, dev->devpath,
ehci->broken_periodic = 1;
ehci_info(ehci, "using broken periodic workaround\n");
}
+ if (pdev->device == 0x0806 || pdev->device == 0x0811
+ || pdev->device == 0x0829) {
+ ehci_info(ehci, "disable lpm for langwell/penwell\n");
+ ehci->has_lpm = 0;
+ }
break;
case PCI_VENDOR_ID_TDI:
if (pdev->device == PCI_DEVICE_ID_TDI_EHCI) {
index, transmit ? 'T' : 'R', cppi_ch);
cppi_ch->hw_ep = ep;
cppi_ch->channel.status = MUSB_DMA_STATUS_FREE;
+ cppi_ch->channel.max_len = 0x7fffffff;
DBG(4, "Allocate CPPI%d %cX\n", index, transmit ? 'T' : 'R');
return &cppi_ch->channel;
static int musb_test_mode_open(struct inode *inode, struct file *file)
{
- file->private_data = inode->i_private;
-
return single_open(file, musb_test_mode_show, inode->i_private);
}
static ssize_t musb_test_mode_write(struct file *file,
const char __user *ubuf, size_t count, loff_t *ppos)
{
- struct musb *musb = file->private_data;
+ struct seq_file *s = file->private_data;
+ struct musb *musb = s->private;
u8 test = 0;
char buf[18];
#ifndef CONFIG_MUSB_PIO_ONLY
if (is_dma_capable() && musb_ep->dma) {
struct dma_controller *c = musb->dma_controller;
+ size_t request_size;
+
+ /* setup DMA, then program endpoint CSR */
+ request_size = min_t(size_t, request->length - request->actual,
+ musb_ep->dma->max_len);
use_dma = (request->dma != DMA_ADDR_INVALID);
#ifdef CONFIG_USB_INVENTRA_DMA
{
- size_t request_size;
-
- /* setup DMA, then program endpoint CSR */
- request_size = min_t(size_t, request->length,
- musb_ep->dma->max_len);
if (request_size < musb_ep->packet_sz)
musb_ep->dma->desired_mode = 0;
else
use_dma = use_dma && c->channel_program(
musb_ep->dma, musb_ep->packet_sz,
0,
- request->dma,
- request->length);
+ request->dma + request->actual,
+ request_size);
if (!use_dma) {
c->channel_release(musb_ep->dma);
musb_ep->dma = NULL;
use_dma = use_dma && c->channel_program(
musb_ep->dma, musb_ep->packet_sz,
request->zero,
- request->dma,
- request->length);
+ request->dma + request->actual,
+ request_size);
#endif
}
#endif
request->zero = 0;
}
- /* ... or if not, then complete it. */
- musb_g_giveback(musb_ep, request, 0);
-
- /*
- * Kickstart next transfer if appropriate;
- * the packet that just completed might not
- * be transmitted for hours or days.
- * REVISIT for double buffering...
- * FIXME revisit for stalls too...
- */
- musb_ep_select(mbase, epnum);
- csr = musb_readw(epio, MUSB_TXCSR);
- if (csr & MUSB_TXCSR_FIFONOTEMPTY)
- return;
-
- request = musb_ep->desc ? next_request(musb_ep) : NULL;
- if (!request) {
- DBG(4, "%s idle now\n",
- musb_ep->end_point.name);
- return;
+ if (request->actual == request->length) {
+ musb_g_giveback(musb_ep, request, 0);
+ request = musb_ep->desc ? next_request(musb_ep) : NULL;
+ if (!request) {
+ DBG(4, "%s idle now\n",
+ musb_ep->end_point.name);
+ return;
+ }
}
}
{
const u8 epnum = req->epnum;
struct usb_request *request = &req->request;
- struct musb_ep *musb_ep = &musb->endpoints[epnum].ep_out;
+ struct musb_ep *musb_ep;
void __iomem *epio = musb->endpoints[epnum].regs;
unsigned fifo_count = 0;
- u16 len = musb_ep->packet_sz;
+ u16 len;
u16 csr = musb_readw(epio, MUSB_RXCSR);
+ struct musb_hw_ep *hw_ep = &musb->endpoints[epnum];
+
+ if (hw_ep->is_shared_fifo)
+ musb_ep = &hw_ep->ep_in;
+ else
+ musb_ep = &hw_ep->ep_out;
+
+ len = musb_ep->packet_sz;
/* We shouldn't get here while DMA is active, but we do... */
if (dma_channel_status(musb_ep->dma) == MUSB_DMA_STATUS_BUSY) {
*/
csr |= MUSB_RXCSR_DMAENAB;
-#ifdef USE_MODE1
csr |= MUSB_RXCSR_AUTOCLEAR;
+#ifdef USE_MODE1
/* csr |= MUSB_RXCSR_DMAMODE; */
/* this special sequence (enabling and then
if (request->actual < request->length) {
int transfer_size = 0;
#ifdef USE_MODE1
- transfer_size = min(request->length,
+ transfer_size = min(request->length - request->actual,
channel->max_len);
#else
- transfer_size = len;
+ transfer_size = min(request->length - request->actual,
+ (unsigned)len);
#endif
if (transfer_size <= musb_ep->packet_sz)
musb_ep->dma->desired_mode = 0;
u16 csr;
struct usb_request *request;
void __iomem *mbase = musb->mregs;
- struct musb_ep *musb_ep = &musb->endpoints[epnum].ep_out;
+ struct musb_ep *musb_ep;
void __iomem *epio = musb->endpoints[epnum].regs;
struct dma_channel *dma;
+ struct musb_hw_ep *hw_ep = &musb->endpoints[epnum];
+
+ if (hw_ep->is_shared_fifo)
+ musb_ep = &hw_ep->ep_in;
+ else
+ musb_ep = &hw_ep->ep_out;
musb_ep_select(mbase, epnum);
/*
* Context: controller locked, IRQs blocked.
*/
-static void musb_ep_restart(struct musb *musb, struct musb_request *req)
+void musb_ep_restart(struct musb *musb, struct musb_request *req)
{
DBG(3, "<== %s request %p len %u on hw_ep%d\n",
req->tx ? "TX/IN" : "RX/OUT",
extern void musb_g_giveback(struct musb_ep *, struct usb_request *, int);
+extern void musb_ep_restart(struct musb *, struct musb_request *);
+
#endif /* __MUSB_GADGET_H */
ctrlrequest->wIndex & 0x0f;
struct musb_ep *musb_ep;
struct musb_hw_ep *ep;
+ struct musb_request *request;
void __iomem *regs;
int is_in;
u16 csr;
musb_writew(regs, MUSB_RXCSR, csr);
}
+ /* Maybe start the first request in the queue */
+ request = to_musb_request(
+ next_request(musb_ep));
+ if (!musb_ep->busy && request) {
+ DBG(3, "restarting the request\n");
+ musb_ep_restart(musb, request);
+ }
+
/* select ep0 again */
musb_ep_select(mbase, 0);
} break;
qh->segsize = length;
+ /*
+ * Ensure the data reaches to main memory before starting
+ * DMA transfer
+ */
+ wmb();
+
if (!dma->channel_program(channel, pkt_size, mode,
urb->transfer_dma + offset, length)) {
dma->channel_release(channel);
}
}
-static void twl4030_phy_power(struct twl4030_usb *twl, int on)
+static void __twl4030_phy_power(struct twl4030_usb *twl, int on)
{
- u8 pwr;
+ u8 pwr = twl4030_usb_read(twl, PHY_PWR_CTRL);
+
+ if (on)
+ pwr &= ~PHY_PWR_PHYPWD;
+ else
+ pwr |= PHY_PWR_PHYPWD;
- pwr = twl4030_usb_read(twl, PHY_PWR_CTRL);
+ WARN_ON(twl4030_usb_write_verify(twl, PHY_PWR_CTRL, pwr) < 0);
+}
+
+static void twl4030_phy_power(struct twl4030_usb *twl, int on)
+{
if (on) {
regulator_enable(twl->usb3v1);
regulator_enable(twl->usb1v8);
twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0,
VUSB_DEDICATED2);
regulator_enable(twl->usb1v5);
- pwr &= ~PHY_PWR_PHYPWD;
- WARN_ON(twl4030_usb_write_verify(twl, PHY_PWR_CTRL, pwr) < 0);
+ __twl4030_phy_power(twl, 1);
twl4030_usb_write(twl, PHY_CLK_CTRL,
twl4030_usb_read(twl, PHY_CLK_CTRL) |
(PHY_CLK_CTRL_CLOCKGATING_EN |
PHY_CLK_CTRL_CLK32K_EN));
- } else {
- pwr |= PHY_PWR_PHYPWD;
- WARN_ON(twl4030_usb_write_verify(twl, PHY_PWR_CTRL, pwr) < 0);
+ } else {
+ __twl4030_phy_power(twl, 0);
regulator_disable(twl->usb1v5);
regulator_disable(twl->usb1v8);
regulator_disable(twl->usb3v1);
twl4030_phy_power(twl, 0);
twl->asleep = 1;
+ dev_dbg(twl->dev, "%s\n", __func__);
}
-static void twl4030_phy_resume(struct twl4030_usb *twl)
+static void __twl4030_phy_resume(struct twl4030_usb *twl)
{
- if (!twl->asleep)
- return;
-
twl4030_phy_power(twl, 1);
twl4030_i2c_access(twl, 1);
twl4030_usb_set_mode(twl, twl->usb_mode);
if (twl->usb_mode == T2_USB_MODE_ULPI)
twl4030_i2c_access(twl, 0);
+}
+
+static void twl4030_phy_resume(struct twl4030_usb *twl)
+{
+ if (!twl->asleep)
+ return;
+ __twl4030_phy_resume(twl);
twl->asleep = 0;
+ dev_dbg(twl->dev, "%s\n", __func__);
}
static int twl4030_usb_ldo_init(struct twl4030_usb *twl)
twl_i2c_write_u8(TWL4030_MODULE_PM_MASTER, 0xC0, PROTECT_KEY);
twl_i2c_write_u8(TWL4030_MODULE_PM_MASTER, 0x0C, PROTECT_KEY);
- /* put VUSB3V1 LDO in active state */
- twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB_DEDICATED2);
+ /* Keep VUSB3V1 LDO in sleep state until VBUS/ID change detected*/
+ /*twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB_DEDICATED2);*/
/* input to VUSB3V1 LDO is from VBAT, not VBUS */
twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0x14, VUSB_DEDICATED1);
return IRQ_HANDLED;
}
+static void twl4030_usb_phy_init(struct twl4030_usb *twl)
+{
+ int status;
+
+ status = twl4030_usb_linkstat(twl);
+ if (status >= 0) {
+ if (status == USB_EVENT_NONE) {
+ __twl4030_phy_power(twl, 0);
+ twl->asleep = 1;
+ } else {
+ __twl4030_phy_resume(twl);
+ twl->asleep = 0;
+ }
+
+ blocking_notifier_call_chain(&twl->otg.notifier, status,
+ twl->otg.gadget);
+ }
+ sysfs_notify(&twl->dev->kobj, NULL, "vbus");
+}
+
static int twl4030_set_suspend(struct otg_transceiver *x, int suspend)
{
struct twl4030_usb *twl = xceiv_to_twl(x);
struct twl4030_usb_data *pdata = pdev->dev.platform_data;
struct twl4030_usb *twl;
int status, err;
- u8 pwr;
if (!pdata) {
dev_dbg(&pdev->dev, "platform_data not available\n");
twl->otg.set_peripheral = twl4030_set_peripheral;
twl->otg.set_suspend = twl4030_set_suspend;
twl->usb_mode = pdata->usb_mode;
-
- pwr = twl4030_usb_read(twl, PHY_PWR_CTRL);
-
- twl->asleep = (pwr & PHY_PWR_PHYPWD);
+ twl->asleep = 1;
/* init spinlock for workqueue */
spin_lock_init(&twl->lock);
return status;
}
- /* The IRQ handler just handles changes from the previous states
- * of the ID and VBUS pins ... in probe() we must initialize that
- * previous state. The easy way: fake an IRQ.
- *
- * REVISIT: a real IRQ might have happened already, if PREEMPT is
- * enabled. Else the IRQ may not yet be configured or enabled,
- * because of scheduling delays.
+ /* Power down phy or make it work according to
+ * current link state.
*/
- twl4030_usb_irq(twl->irq, twl);
+ twl4030_usb_phy_init(twl);
dev_info(&pdev->dev, "Initialized TWL4030 USB module\n");
return 0;
case TIOCGICOUNT:
cnow = mos7720_port->icount;
+
+ memset(&icount, 0, sizeof(struct serial_icounter_struct));
+
icount.cts = cnow.cts;
icount.dsr = cnow.dsr;
icount.rng = cnow.rng;
case TIOCGICOUNT:
cnow = mos7840_port->icount;
smp_rmb();
+
+ memset(&icount, 0, sizeof(struct serial_icounter_struct));
+
icount.cts = cnow.cts;
icount.dsr = cnow.dsr;
icount.rng = cnow.rng;
int r, nlogs = 0;
while (datalen > 0) {
- if (unlikely(headcount >= VHOST_NET_MAX_SG)) {
+ if (unlikely(seg >= VHOST_NET_MAX_SG)) {
r = -ENOBUFS;
goto err;
}
if (r < 0)
return r;
len -= l;
- if (!len)
+ if (!len) {
+ if (vq->log_ctx)
+ eventfd_signal(vq->log_ctx, 1);
return 0;
+ }
}
- if (vq->log_ctx)
- eventfd_signal(vq->log_ctx, 1);
/* Length written exceeds what we have stored. This is a bug. */
BUG();
return 0;
softback_buf = 0UL;
for (i = 0; i < FB_MAX; i++) {
- int pending;
+ int pending = 0;
mapped = 0;
info = registered_fb[i];
if (info == NULL)
continue;
- pending = cancel_work_sync(&info->queue);
+ if (info->queue.func)
+ pending = cancel_work_sync(&info->queue);
DPRINTK("fbcon: %s pending work\n", (pending ? "canceled" :
"no"));
#include <linux/platform_device.h>
#include <linux/screen_info.h>
#include <linux/dmi.h>
-
+#include <linux/pci.h>
#include <video/vga.h>
static struct fb_var_screeninfo efifb_defined __devinitdata = {
M_I20, /* 20-Inch iMac */
M_I20_SR, /* 20-Inch iMac (Santa Rosa) */
M_I24, /* 24-Inch iMac */
+ M_I24_8_1, /* 24-Inch iMac, 8,1th gen */
+ M_I24_10_1, /* 24-Inch iMac, 10,1th gen */
+ M_I27_11_1, /* 27-Inch iMac, 11,1th gen */
M_MINI, /* Mac Mini */
+ M_MINI_3_1, /* Mac Mini, 3,1th gen */
+ M_MINI_4_1, /* Mac Mini, 4,1th gen */
M_MB, /* MacBook */
M_MB_2, /* MacBook, 2nd rev. */
M_MB_3, /* MacBook, 3rd rev. */
+ M_MB_5_1, /* MacBook, 5th rev. */
+ M_MB_6_1, /* MacBook, 6th rev. */
+ M_MB_7_1, /* MacBook, 7th rev. */
M_MB_SR, /* MacBook, 2nd gen, (Santa Rosa) */
M_MBA, /* MacBook Air */
M_MBP, /* MacBook Pro */
M_MBP_2, /* MacBook Pro 2nd gen */
+ M_MBP_2_2, /* MacBook Pro 2,2nd gen */
M_MBP_SR, /* MacBook Pro (Santa Rosa) */
M_MBP_4, /* MacBook Pro, 4th gen */
M_MBP_5_1, /* MacBook Pro, 5,1th gen */
+ M_MBP_5_2, /* MacBook Pro, 5,2th gen */
+ M_MBP_5_3, /* MacBook Pro, 5,3rd gen */
+ M_MBP_6_1, /* MacBook Pro, 6,1th gen */
+ M_MBP_6_2, /* MacBook Pro, 6,2th gen */
+ M_MBP_7_1, /* MacBook Pro, 7,1th gen */
M_UNKNOWN /* placeholder */
};
[M_I20] = { "i20", 0x80010000, 1728 * 4, 1680, 1050 }, /* guess */
[M_I20_SR] = { "imac7", 0x40010000, 1728 * 4, 1680, 1050 },
[M_I24] = { "i24", 0x80010000, 2048 * 4, 1920, 1200 }, /* guess */
+ [M_I24_8_1] = { "imac8", 0xc0060000, 2048 * 4, 1920, 1200 },
+ [M_I24_10_1] = { "imac10", 0xc0010000, 2048 * 4, 1920, 1080 },
+ [M_I27_11_1] = { "imac11", 0xc0010000, 2560 * 4, 2560, 1440 },
[M_MINI]= { "mini", 0x80000000, 2048 * 4, 1024, 768 },
+ [M_MINI_3_1] = { "mini31", 0x40010000, 1024 * 4, 1024, 768 },
+ [M_MINI_4_1] = { "mini41", 0xc0010000, 2048 * 4, 1920, 1200 },
[M_MB] = { "macbook", 0x80000000, 2048 * 4, 1280, 800 },
+ [M_MB_5_1] = { "macbook51", 0x80010000, 2048 * 4, 1280, 800 },
+ [M_MB_6_1] = { "macbook61", 0x80010000, 2048 * 4, 1280, 800 },
+ [M_MB_7_1] = { "macbook71", 0x80010000, 2048 * 4, 1280, 800 },
[M_MBA] = { "mba", 0x80000000, 2048 * 4, 1280, 800 },
[M_MBP] = { "mbp", 0x80010000, 1472 * 4, 1440, 900 },
[M_MBP_2] = { "mbp2", 0, 0, 0, 0 }, /* placeholder */
+ [M_MBP_2_2] = { "mbp22", 0x80010000, 1472 * 4, 1440, 900 },
[M_MBP_SR] = { "mbp3", 0x80030000, 2048 * 4, 1440, 900 },
[M_MBP_4] = { "mbp4", 0xc0060000, 2048 * 4, 1920, 1200 },
[M_MBP_5_1] = { "mbp51", 0xc0010000, 2048 * 4, 1440, 900 },
+ [M_MBP_5_2] = { "mbp52", 0xc0010000, 2048 * 4, 1920, 1200 },
+ [M_MBP_5_3] = { "mbp53", 0xd0010000, 2048 * 4, 1440, 900 },
+ [M_MBP_6_1] = { "mbp61", 0x90030000, 2048 * 4, 1920, 1200 },
+ [M_MBP_6_2] = { "mbp62", 0x90030000, 2048 * 4, 1680, 1050 },
+ [M_MBP_7_1] = { "mbp71", 0xc0010000, 2048 * 4, 1280, 800 },
[M_UNKNOWN] = { NULL, 0, 0, 0, 0 }
};
EFIFB_DMI_SYSTEM_ID("Apple Computer, Inc.", "iMac6,1", M_I24),
EFIFB_DMI_SYSTEM_ID("Apple Inc.", "iMac6,1", M_I24),
EFIFB_DMI_SYSTEM_ID("Apple Inc.", "iMac7,1", M_I20_SR),
+ EFIFB_DMI_SYSTEM_ID("Apple Inc.", "iMac8,1", M_I24_8_1),
+ EFIFB_DMI_SYSTEM_ID("Apple Inc.", "iMac10,1", M_I24_10_1),
+ EFIFB_DMI_SYSTEM_ID("Apple Inc.", "iMac11,1", M_I27_11_1),
EFIFB_DMI_SYSTEM_ID("Apple Computer, Inc.", "Macmini1,1", M_MINI),
+ EFIFB_DMI_SYSTEM_ID("Apple Inc.", "Macmini3,1", M_MINI_3_1),
+ EFIFB_DMI_SYSTEM_ID("Apple Inc.", "Macmini4,1", M_MINI_4_1),
EFIFB_DMI_SYSTEM_ID("Apple Computer, Inc.", "MacBook1,1", M_MB),
/* At least one of these two will be right; maybe both? */
EFIFB_DMI_SYSTEM_ID("Apple Computer, Inc.", "MacBook2,1", M_MB),
EFIFB_DMI_SYSTEM_ID("Apple Computer, Inc.", "MacBook3,1", M_MB),
EFIFB_DMI_SYSTEM_ID("Apple Inc.", "MacBook3,1", M_MB),
EFIFB_DMI_SYSTEM_ID("Apple Inc.", "MacBook4,1", M_MB),
+ EFIFB_DMI_SYSTEM_ID("Apple Inc.", "MacBook5,1", M_MB_5_1),
+ EFIFB_DMI_SYSTEM_ID("Apple Inc.", "MacBook6,1", M_MB_6_1),
+ EFIFB_DMI_SYSTEM_ID("Apple Inc.", "MacBook7,1", M_MB_7_1),
EFIFB_DMI_SYSTEM_ID("Apple Inc.", "MacBookAir1,1", M_MBA),
EFIFB_DMI_SYSTEM_ID("Apple Computer, Inc.", "MacBookPro1,1", M_MBP),
EFIFB_DMI_SYSTEM_ID("Apple Computer, Inc.", "MacBookPro2,1", M_MBP_2),
+ EFIFB_DMI_SYSTEM_ID("Apple Computer, Inc.", "MacBookPro2,2", M_MBP_2_2),
EFIFB_DMI_SYSTEM_ID("Apple Inc.", "MacBookPro2,1", M_MBP_2),
EFIFB_DMI_SYSTEM_ID("Apple Computer, Inc.", "MacBookPro3,1", M_MBP_SR),
EFIFB_DMI_SYSTEM_ID("Apple Inc.", "MacBookPro3,1", M_MBP_SR),
EFIFB_DMI_SYSTEM_ID("Apple Inc.", "MacBookPro4,1", M_MBP_4),
EFIFB_DMI_SYSTEM_ID("Apple Inc.", "MacBookPro5,1", M_MBP_5_1),
+ EFIFB_DMI_SYSTEM_ID("Apple Inc.", "MacBookPro5,2", M_MBP_5_2),
+ EFIFB_DMI_SYSTEM_ID("Apple Inc.", "MacBookPro5,3", M_MBP_5_3),
+ EFIFB_DMI_SYSTEM_ID("Apple Inc.", "MacBookPro6,1", M_MBP_6_1),
+ EFIFB_DMI_SYSTEM_ID("Apple Inc.", "MacBookPro6,2", M_MBP_6_2),
+ EFIFB_DMI_SYSTEM_ID("Apple Inc.", "MacBookPro7,1", M_MBP_7_1),
{},
};
{
struct efifb_dmi_info *info = id->driver_data;
if (info->base == 0)
- return -ENODEV;
+ return 0;
printk(KERN_INFO "efifb: dmi detected %s - framebuffer at %p "
"(%dx%d, stride %d)\n", id->ident,
info->stride);
/* Trust the bootloader over the DMI tables */
- if (screen_info.lfb_base == 0)
+ if (screen_info.lfb_base == 0) {
+#if defined(CONFIG_PCI)
+ struct pci_dev *dev = NULL;
+ int found_bar = 0;
+#endif
screen_info.lfb_base = info->base;
- if (screen_info.lfb_linelength == 0)
- screen_info.lfb_linelength = info->stride;
- if (screen_info.lfb_width == 0)
- screen_info.lfb_width = info->width;
- if (screen_info.lfb_height == 0)
- screen_info.lfb_height = info->height;
- if (screen_info.orig_video_isVGA == 0)
- screen_info.orig_video_isVGA = VIDEO_TYPE_EFI;
- return 0;
+#if defined(CONFIG_PCI)
+ /* make sure that the address in the table is actually on a
+ * VGA device's PCI BAR */
+
+ for_each_pci_dev(dev) {
+ int i;
+ if ((dev->class >> 8) != PCI_CLASS_DISPLAY_VGA)
+ continue;
+ for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
+ resource_size_t start, end;
+
+ start = pci_resource_start(dev, i);
+ if (start == 0)
+ break;
+ end = pci_resource_end(dev, i);
+ if (screen_info.lfb_base >= start &&
+ screen_info.lfb_base < end) {
+ found_bar = 1;
+ }
+ }
+ }
+ if (!found_bar)
+ screen_info.lfb_base = 0;
+#endif
+ }
+ if (screen_info.lfb_base) {
+ if (screen_info.lfb_linelength == 0)
+ screen_info.lfb_linelength = info->stride;
+ if (screen_info.lfb_width == 0)
+ screen_info.lfb_width = info->width;
+ if (screen_info.lfb_height == 0)
+ screen_info.lfb_height = info->height;
+ if (screen_info.orig_video_isVGA == 0)
+ screen_info.orig_video_isVGA = VIDEO_TYPE_EFI;
+ } else {
+ screen_info.lfb_linelength = 0;
+ screen_info.lfb_width = 0;
+ screen_info.lfb_height = 0;
+ screen_info.orig_video_isVGA = 0;
+ return 0;
+ }
+ return 1;
}
static int efifb_setcolreg(unsigned regno, unsigned red, unsigned green,
* Set bit to enable graphics DMA.
*/
x = readl(fbi->reg_base + LCD_SPU_DMA_CTRL0);
- x |= fbi->active ? 0x00000100 : 0;
- fbi->active = 0;
+ x &= ~CFG_GRA_ENA_MASK;
+ x |= fbi->active ? CFG_GRA_ENA(1) : CFG_GRA_ENA(0);
/*
* If we are in a pseudo-color mode, we need to enable
break;
case FBIOGET_VBLANK:
+
+ memset(&sisvbblank, 0, sizeof(struct fb_vblank));
+
sisvbblank.count = 0;
sisvbblank.flags = sisfb_setupvbblankflags(ivideo, &sisvbblank.vcount, &sisvbblank.hcount);
{
int ret = 0;
- blocking_notifier_chain_register(&xenstore_chain, nb);
+ if (xenstored_ready > 0)
+ ret = nb->notifier_call(nb, 0, NULL);
+ else
+ blocking_notifier_chain_register(&xenstore_chain, nb);
return ret;
}
void xenbus_probe(struct work_struct *unused)
{
- BUG_ON((xenstored_ready <= 0));
+ xenstored_ready = 1;
/* Enumerate devices in xenstore and watch for changes. */
xenbus_probe_devices(&xenbus_frontend);
xen_store_evtchn = xen_start_info->store_evtchn;
xen_store_mfn = xen_start_info->store_mfn;
xen_store_interface = mfn_to_virt(xen_store_mfn);
+ xenstored_ready = 1;
}
- xenstored_ready = 1;
}
/* Initialize the interface to xenstore. */
*/
ret = retry(iocb);
- if (ret != -EIOCBRETRY && ret != -EIOCBQUEUED)
+ if (ret != -EIOCBRETRY && ret != -EIOCBQUEUED) {
+ /*
+ * There's no easy way to restart the syscall since other AIO's
+ * may be already running. Just fail this IO with EINTR.
+ */
+ if (unlikely(ret == -ERESTARTSYS || ret == -ERESTARTNOINTR ||
+ ret == -ERESTARTNOHAND || ret == -ERESTART_RESTARTBLOCK))
+ ret = -EINTR;
aio_complete(iocb, ret, 0);
+ }
out:
spin_lock_irq(&ctx->ctx_lock);
if (!dump_write(file, dump_start, dump_size))
goto end_coredump;
}
-/* Finally dump the task struct. Not be used by gdb, but could be useful */
- set_fs(KERNEL_DS);
- if (!dump_write(file, current, sizeof(*current)))
- goto end_coredump;
end_coredump:
set_fs(fs);
return has_dumped;
depends on INET && EXPERIMENTAL
select LIBCRC32C
select CRYPTO_AES
+ select CRYPTO
help
Choose Y or M here to include support for mounting the
experimental Ceph distributed file system. Ceph is an extremely
if (i_size < page_off + len)
len = i_size - page_off;
- dout("writepage %p page %p index %lu on %llu~%u\n",
- inode, page, page->index, page_off, len);
+ dout("writepage %p page %p index %lu on %llu~%u snapc %p\n",
+ inode, page, page->index, page_off, len, snapc);
writeback_stat = atomic_long_inc_return(&client->writeback_count);
if (writeback_stat >
/* ok */
if (locked_pages == 0) {
/* prepare async write request */
- offset = page->index << PAGE_CACHE_SHIFT;
+ offset = (unsigned long long)page->index
+ << PAGE_CACHE_SHIFT;
len = wsize;
req = ceph_osdc_new_request(&client->osdc,
&ci->i_layout,
used |= CEPH_CAP_PIN;
if (ci->i_rd_ref)
used |= CEPH_CAP_FILE_RD;
- if (ci->i_rdcache_ref || ci->i_rdcache_gen)
+ if (ci->i_rdcache_ref || ci->vfs_inode.i_data.nrpages)
used |= CEPH_CAP_FILE_CACHE;
if (ci->i_wr_ref)
used |= CEPH_CAP_FILE_WR;
* asynchronously back to the MDS once sync writes complete and dirty
* data is written out.
*
+ * Unless @again is true, skip cap_snaps that were already sent to
+ * the MDS (i.e., during this session).
+ *
* Called under i_lock. Takes s_mutex as needed.
*/
void __ceph_flush_snaps(struct ceph_inode_info *ci,
- struct ceph_mds_session **psession)
+ struct ceph_mds_session **psession,
+ int again)
__releases(ci->vfs_inode->i_lock)
__acquires(ci->vfs_inode->i_lock)
{
* pages to be written out.
*/
if (capsnap->dirty_pages || capsnap->writing)
- continue;
+ break;
/*
* if cap writeback already occurred, we should have dropped
dout("no auth cap (migrating?), doing nothing\n");
goto out;
}
+
+ /* only flush each capsnap once */
+ if (!again && !list_empty(&capsnap->flushing_item)) {
+ dout("already flushed %p, skipping\n", capsnap);
+ continue;
+ }
+
mds = ci->i_auth_cap->session->s_mds;
mseq = ci->i_auth_cap->mseq;
&session->s_cap_snaps_flushing);
spin_unlock(&inode->i_lock);
- dout("flush_snaps %p cap_snap %p follows %lld size %llu\n",
- inode, capsnap, next_follows, capsnap->size);
+ dout("flush_snaps %p cap_snap %p follows %lld tid %llu\n",
+ inode, capsnap, capsnap->follows, capsnap->flush_tid);
send_cap_msg(session, ceph_vino(inode).ino, 0,
CEPH_CAP_OP_FLUSHSNAP, capsnap->issued, 0,
capsnap->dirty, 0, capsnap->flush_tid, 0, mseq,
struct inode *inode = &ci->vfs_inode;
spin_lock(&inode->i_lock);
- __ceph_flush_snaps(ci, NULL);
+ __ceph_flush_snaps(ci, NULL, 0);
spin_unlock(&inode->i_lock);
}
/* flush snaps first time around only */
if (!list_empty(&ci->i_cap_snaps))
- __ceph_flush_snaps(ci, &session);
+ __ceph_flush_snaps(ci, &session, 0);
goto retry_locked;
retry:
spin_lock(&inode->i_lock);
if (cap && cap->session == session) {
dout("kick_flushing_caps %p cap %p capsnap %p\n", inode,
cap, capsnap);
- __ceph_flush_snaps(ci, &session);
+ __ceph_flush_snaps(ci, &session, 1);
} else {
pr_err("%p auth cap %p not mds%d ???\n", inode,
cap, session->s_mds);
{
struct ceph_inode_info *ci = ceph_inode(inode);
int mds = session->s_mds;
- int seq = le32_to_cpu(grant->seq);
+ unsigned seq = le32_to_cpu(grant->seq);
+ unsigned issue_seq = le32_to_cpu(grant->issue_seq);
int newcaps = le32_to_cpu(grant->caps);
int issued, implemented, used, wanted, dirty;
u64 size = le64_to_cpu(grant->size);
int revoked_rdcache = 0;
int queue_invalidate = 0;
- dout("handle_cap_grant inode %p cap %p mds%d seq %d %s\n",
- inode, cap, mds, seq, ceph_cap_string(newcaps));
+ dout("handle_cap_grant inode %p cap %p mds%d seq %u/%u %s\n",
+ inode, cap, mds, seq, issue_seq, ceph_cap_string(newcaps));
dout(" size %llu max_size %llu, i_size %llu\n", size, max_size,
inode->i_size);
}
cap->seq = seq;
+ cap->issue_seq = issue_seq;
/* file layout may have changed */
ci->i_layout = grant->layout;
if (op == CEPH_CAP_OP_IMPORT)
__queue_cap_release(session, vino.ino, cap_id,
mseq, seq);
-
- /*
- * send any full release message to try to move things
- * along for the mds (who clearly thinks we still have this
- * cap).
- */
- ceph_add_cap_releases(mdsc, session);
- ceph_send_cap_releases(mdsc, session);
- goto done;
+ goto flush_cap_releases;
}
/* these will work even if we don't have a cap yet */
dout(" no cap on %p ino %llx.%llx from mds%d\n",
inode, ceph_ino(inode), ceph_snap(inode), mds);
spin_unlock(&inode->i_lock);
- goto done;
+ goto flush_cap_releases;
}
/* note that each of these drops i_lock for us */
ceph_cap_op_name(op));
}
+ goto done;
+
+flush_cap_releases:
+ /*
+ * send any full release message to try to move things
+ * along for the mds (who clearly thinks we still have this
+ * cap).
+ */
+ ceph_add_cap_releases(mdsc, session);
+ ceph_send_cap_releases(mdsc, session);
+
done:
mutex_unlock(&session->s_mutex);
done_unlocked:
static void ceph_dentry_release(struct dentry *dentry)
{
struct ceph_dentry_info *di = ceph_dentry(dentry);
- struct inode *parent_inode = dentry->d_parent->d_inode;
- u64 snapid = ceph_snap(parent_inode);
+ struct inode *parent_inode = NULL;
+ u64 snapid = CEPH_NOSNAP;
+ if (!IS_ROOT(dentry)) {
+ parent_inode = dentry->d_parent->d_inode;
+ if (parent_inode)
+ snapid = ceph_snap(parent_inode);
+ }
dout("dentry_release %p parent %p\n", dentry, parent_inode);
-
if (parent_inode && snapid != CEPH_SNAPDIR) {
struct ceph_inode_info *ci = ceph_inode(parent_inode);
static int ceph_encode_fh(struct dentry *dentry, u32 *rawfh, int *max_len,
int connectable)
{
+ int type;
struct ceph_nfs_fh *fh = (void *)rawfh;
struct ceph_nfs_confh *cfh = (void *)rawfh;
struct dentry *parent = dentry->d_parent;
struct inode *inode = dentry->d_inode;
- int type;
+ int connected_handle_length = sizeof(*cfh)/4;
+ int handle_length = sizeof(*fh)/4;
/* don't re-export snaps */
if (ceph_snap(inode) != CEPH_NOSNAP)
return -EINVAL;
- if (*max_len >= sizeof(*cfh)) {
+ if (*max_len >= connected_handle_length) {
dout("encode_fh %p connectable\n", dentry);
cfh->ino = ceph_ino(dentry->d_inode);
cfh->parent_ino = ceph_ino(parent->d_inode);
cfh->parent_name_hash = parent->d_name.hash;
- *max_len = sizeof(*cfh);
+ *max_len = connected_handle_length;
type = 2;
- } else if (*max_len > sizeof(*fh)) {
- if (connectable)
- return -ENOSPC;
+ } else if (*max_len >= handle_length) {
+ if (connectable) {
+ *max_len = connected_handle_length;
+ return 255;
+ }
dout("encode_fh %p\n", dentry);
fh->ino = ceph_ino(dentry->d_inode);
- *max_len = sizeof(*fh);
+ *max_len = handle_length;
type = 1;
} else {
- return -ENOSPC;
+ *max_len = handle_length;
+ return 255;
}
return type;
}
* start_request so that a tid has been assigned.
*/
spin_lock(&ci->i_unsafe_lock);
- list_add(&ci->i_unsafe_writes, &req->r_unsafe_item);
+ list_add(&req->r_unsafe_item, &ci->i_unsafe_writes);
spin_unlock(&ci->i_unsafe_lock);
ceph_get_cap_refs(ci, CEPH_CAP_FILE_WR);
}
* the caller) if we fail.
*/
static struct dentry *splice_dentry(struct dentry *dn, struct inode *in,
- bool *prehash)
+ bool *prehash, bool set_offset)
{
struct dentry *realdn;
}
if ((!prehash || *prehash) && d_unhashed(dn))
d_rehash(dn);
- ceph_set_dentry_offset(dn);
+ if (set_offset)
+ ceph_set_dentry_offset(dn);
out:
return dn;
}
d_delete(dn);
goto done;
}
- dn = splice_dentry(dn, in, &have_lease);
+ dn = splice_dentry(dn, in, &have_lease, true);
if (IS_ERR(dn)) {
err = PTR_ERR(dn);
goto done;
goto done;
}
dout(" linking snapped dir %p to dn %p\n", in, dn);
- dn = splice_dentry(dn, in, NULL);
+ dn = splice_dentry(dn, in, NULL, true);
if (IS_ERR(dn)) {
err = PTR_ERR(dn);
goto done;
err = PTR_ERR(in);
goto out;
}
- dn = splice_dentry(dn, in, NULL);
+ dn = splice_dentry(dn, in, NULL, false);
if (IS_ERR(dn))
dn = NULL;
}
num_fcntl_locks,
num_flock_locks);
unlock_kernel();
+ } else {
+ err = ceph_pagelist_append(pagelist, &rec, reclen);
}
out_free:
*/
static void __cancel_request(struct ceph_osd_request *req)
{
- if (req->r_sent) {
+ if (req->r_sent && req->r_osd) {
ceph_con_revoke(&req->r_osd->o_con, req->r_request);
req->r_sent = 0;
}
#include "pagelist.h"
+static void ceph_pagelist_unmap_tail(struct ceph_pagelist *pl)
+{
+ struct page *page = list_entry(pl->head.prev, struct page,
+ lru);
+ kunmap(page);
+}
+
int ceph_pagelist_release(struct ceph_pagelist *pl)
{
if (pl->mapped_tail)
- kunmap(pl->mapped_tail);
+ ceph_pagelist_unmap_tail(pl);
+
while (!list_empty(&pl->head)) {
struct page *page = list_first_entry(&pl->head, struct page,
lru);
pl->room += PAGE_SIZE;
list_add_tail(&page->lru, &pl->head);
if (pl->mapped_tail)
- kunmap(pl->mapped_tail);
+ ceph_pagelist_unmap_tail(pl);
pl->mapped_tail = kmap(page);
return 0;
}
INIT_LIST_HEAD(&realm->children);
INIT_LIST_HEAD(&realm->child_item);
INIT_LIST_HEAD(&realm->empty_item);
+ INIT_LIST_HEAD(&realm->dirty_item);
INIT_LIST_HEAD(&realm->inodes_with_caps);
spin_lock_init(&realm->inodes_with_caps_lock);
__insert_snap_realm(&mdsc->snap_realms, realm);
INIT_LIST_HEAD(&capsnap->ci_item);
INIT_LIST_HEAD(&capsnap->flushing_item);
- capsnap->follows = snapc->seq - 1;
+ capsnap->follows = snapc->seq;
capsnap->issued = __ceph_caps_issued(ci, NULL);
capsnap->dirty = dirty;
struct ceph_snap_realm *realm;
int invalidate = 0;
int err = -ENOMEM;
+ LIST_HEAD(dirty_realms);
dout("update_snap_trace deletion=%d\n", deletion);
more:
}
}
- if (le64_to_cpu(ri->seq) > realm->seq) {
- dout("update_snap_trace updating %llx %p %lld -> %lld\n",
- realm->ino, realm, realm->seq, le64_to_cpu(ri->seq));
- /*
- * if the realm seq has changed, queue a cap_snap for every
- * inode with open caps. we do this _before_ we update
- * the realm info so that we prepare for writeback under the
- * _previous_ snap context.
- *
- * ...unless it's a snap deletion!
- */
- if (!deletion)
- queue_realm_cap_snaps(realm);
- } else {
- dout("update_snap_trace %llx %p seq %lld unchanged\n",
- realm->ino, realm, realm->seq);
- }
-
/* ensure the parent is correct */
err = adjust_snap_realm_parent(mdsc, realm, le64_to_cpu(ri->parent));
if (err < 0)
invalidate += err;
if (le64_to_cpu(ri->seq) > realm->seq) {
+ dout("update_snap_trace updating %llx %p %lld -> %lld\n",
+ realm->ino, realm, realm->seq, le64_to_cpu(ri->seq));
/* update realm parameters, snap lists */
realm->seq = le64_to_cpu(ri->seq);
realm->created = le64_to_cpu(ri->created);
if (err < 0)
goto fail;
+ /* queue realm for cap_snap creation */
+ list_add(&realm->dirty_item, &dirty_realms);
+
invalidate = 1;
} else if (!realm->cached_context) {
+ dout("update_snap_trace %llx %p seq %lld new\n",
+ realm->ino, realm, realm->seq);
invalidate = 1;
+ } else {
+ dout("update_snap_trace %llx %p seq %lld unchanged\n",
+ realm->ino, realm, realm->seq);
}
dout("done with %llx %p, invalidated=%d, %p %p\n", realm->ino,
if (invalidate)
rebuild_snap_realms(realm);
+ /*
+ * queue cap snaps _after_ we've built the new snap contexts,
+ * so that i_head_snapc can be set appropriately.
+ */
+ list_for_each_entry(realm, &dirty_realms, dirty_item) {
+ queue_realm_cap_snaps(realm);
+ }
+
__cleanup_empty_realms(mdsc);
return 0;
igrab(inode);
spin_unlock(&mdsc->snap_flush_lock);
spin_lock(&inode->i_lock);
- __ceph_flush_snaps(ci, &session);
+ __ceph_flush_snaps(ci, &session, 0);
spin_unlock(&inode->i_lock);
iput(inode);
spin_lock(&mdsc->snap_flush_lock);
};
struct inode *inode = ceph_find_inode(sb, vino);
struct ceph_inode_info *ci;
+ struct ceph_snap_realm *oldrealm;
if (!inode)
continue;
dout(" will move %p to split realm %llx %p\n",
inode, realm->ino, realm);
/*
- * Remove the inode from the realm's inode
- * list, but don't add it to the new realm
- * yet. We don't want the cap_snap to be
- * queued (again) by ceph_update_snap_trace()
- * below. Queue it _now_, under the old context.
+ * Move the inode to the new realm
*/
spin_lock(&realm->inodes_with_caps_lock);
list_del_init(&ci->i_snap_realm_item);
+ list_add(&ci->i_snap_realm_item,
+ &realm->inodes_with_caps);
+ oldrealm = ci->i_snap_realm;
+ ci->i_snap_realm = realm;
spin_unlock(&realm->inodes_with_caps_lock);
spin_unlock(&inode->i_lock);
- ceph_queue_cap_snap(ci);
+ ceph_get_snap_realm(mdsc, realm);
+ ceph_put_snap_realm(mdsc, oldrealm);
iput(inode);
continue;
ceph_update_snap_trace(mdsc, p, e,
op == CEPH_SNAP_OP_DESTROY);
- if (op == CEPH_SNAP_OP_SPLIT) {
- /*
- * ok, _now_ add the inodes into the new realm.
- */
- for (i = 0; i < num_split_inos; i++) {
- struct ceph_vino vino = {
- .ino = le64_to_cpu(split_inos[i]),
- .snap = CEPH_NOSNAP,
- };
- struct inode *inode = ceph_find_inode(sb, vino);
- struct ceph_inode_info *ci;
-
- if (!inode)
- continue;
- ci = ceph_inode(inode);
- spin_lock(&inode->i_lock);
- if (list_empty(&ci->i_snap_realm_item)) {
- struct ceph_snap_realm *oldrealm =
- ci->i_snap_realm;
-
- dout(" moving %p to split realm %llx %p\n",
- inode, realm->ino, realm);
- spin_lock(&realm->inodes_with_caps_lock);
- list_add(&ci->i_snap_realm_item,
- &realm->inodes_with_caps);
- ci->i_snap_realm = realm;
- spin_unlock(&realm->inodes_with_caps_lock);
- ceph_get_snap_realm(mdsc, realm);
- ceph_put_snap_realm(mdsc, oldrealm);
- }
- spin_unlock(&inode->i_lock);
- iput(inode);
- }
-
+ if (op == CEPH_SNAP_OP_SPLIT)
/* we took a reference when we created the realm, above */
ceph_put_snap_realm(mdsc, realm);
- }
__cleanup_empty_realms(mdsc);
struct list_head empty_item; /* if i have ref==0 */
+ struct list_head dirty_item; /* if realm needs new context */
+
/* the current set of snaps for this realm */
struct ceph_snap_context *cached_context;
extern void ceph_put_wrbuffer_cap_refs(struct ceph_inode_info *ci, int nr,
struct ceph_snap_context *snapc);
extern void __ceph_flush_snaps(struct ceph_inode_info *ci,
- struct ceph_mds_session **psession);
+ struct ceph_mds_session **psession,
+ int again);
extern void ceph_check_caps(struct ceph_inode_info *ci, int flags,
struct ceph_mds_session *session);
extern void ceph_check_delayed_caps(struct ceph_mds_client *mdsc);
#endif
/* permit direct mmap, for read, write or exec */
BDI_CAP_MAP_DIRECT |
- BDI_CAP_READ_MAP | BDI_CAP_WRITE_MAP | BDI_CAP_EXEC_MAP),
+ BDI_CAP_READ_MAP | BDI_CAP_WRITE_MAP | BDI_CAP_EXEC_MAP |
+ /* no writeback happens */
+ BDI_CAP_NO_ACCT_AND_WRITEBACK),
};
static struct kobj_map *cdev_map;
small_smb_init(int smb_command, int wct, struct cifsTconInfo *tcon,
void **request_buf)
{
- int rc = 0;
+ int rc;
rc = cifs_reconnect_tcon(tcon, smb_command);
if (rc)
if (tcon != NULL)
cifs_stats_inc(&tcon->num_smbs_sent);
- return rc;
+ return 0;
}
int
/* If the return code is zero, this function must fill in request_buf pointer */
static int
-smb_init(int smb_command, int wct, struct cifsTconInfo *tcon,
- void **request_buf /* returned */ ,
- void **response_buf /* returned */ )
+__smb_init(int smb_command, int wct, struct cifsTconInfo *tcon,
+ void **request_buf, void **response_buf)
{
- int rc = 0;
-
- rc = cifs_reconnect_tcon(tcon, smb_command);
- if (rc)
- return rc;
-
*request_buf = cifs_buf_get();
if (*request_buf == NULL) {
/* BB should we add a retry in here if not a writepage? */
if (tcon != NULL)
cifs_stats_inc(&tcon->num_smbs_sent);
- return rc;
+ return 0;
+}
+
+/* If the return code is zero, this function must fill in request_buf pointer */
+static int
+smb_init(int smb_command, int wct, struct cifsTconInfo *tcon,
+ void **request_buf, void **response_buf)
+{
+ int rc;
+
+ rc = cifs_reconnect_tcon(tcon, smb_command);
+ if (rc)
+ return rc;
+
+ return __smb_init(smb_command, wct, tcon, request_buf, response_buf);
+}
+
+static int
+smb_init_no_reconnect(int smb_command, int wct, struct cifsTconInfo *tcon,
+ void **request_buf, void **response_buf)
+{
+ if (tcon->ses->need_reconnect || tcon->need_reconnect)
+ return -EHOSTDOWN;
+
+ return __smb_init(smb_command, wct, tcon, request_buf, response_buf);
}
static int validate_t2(struct smb_t2_rsp *pSMB)
cFYI(1, "In QFSUnixInfo");
QFSUnixRetry:
- rc = smb_init(SMB_COM_TRANSACTION2, 15, tcon, (void **) &pSMB,
- (void **) &pSMBr);
+ rc = smb_init_no_reconnect(SMB_COM_TRANSACTION2, 15, tcon,
+ (void **) &pSMB, (void **) &pSMBr);
if (rc)
return rc;
cFYI(1, "In SETFSUnixInfo");
SETFSUnixRetry:
/* BB switch to small buf init to save memory */
- rc = smb_init(SMB_COM_TRANSACTION2, 15, tcon, (void **) &pSMB,
- (void **) &pSMBr);
+ rc = smb_init_no_reconnect(SMB_COM_TRANSACTION2, 15, tcon,
+ (void **) &pSMB, (void **) &pSMBr);
if (rc)
return rc;
inode->i_flags |= S_NOATIME | S_NOCMTIME;
if (inode->i_state & I_NEW) {
inode->i_ino = hash;
+ if (S_ISREG(inode->i_mode))
+ inode->i_data.backing_dev_info = sb->s_bdi;
#ifdef CONFIG_CIFS_FSCACHE
/* initialize per-inode cache cookie pointer */
CIFS_I(inode)->fscache = NULL;
{
compat_ssize_t tot_len;
struct iovec iovstack[UIO_FASTIOV];
- struct iovec *iov;
+ struct iovec *iov = iovstack;
ssize_t ret;
io_fn_t fn;
iov_fn_t fnv;
fail:
return;
}
+
+/*
+ * Core dumping helper functions. These are the only things you should
+ * do on a core-file: use only these functions to write out all the
+ * necessary info.
+ */
+int dump_write(struct file *file, const void *addr, int nr)
+{
+ return access_ok(VERIFY_READ, addr, nr) && file->f_op->write(file, addr, nr, &file->f_pos) == nr;
+}
+EXPORT_SYMBOL(dump_write);
+
+int dump_seek(struct file *file, loff_t off)
+{
+ int ret = 1;
+
+ if (file->f_op->llseek && file->f_op->llseek != no_llseek) {
+ if (file->f_op->llseek(file, off, SEEK_CUR) < 0)
+ return 0;
+ } else {
+ char *buf = (char *)get_zeroed_page(GFP_KERNEL);
+
+ if (!buf)
+ return 0;
+ while (off > 0) {
+ unsigned long n = off;
+
+ if (n > PAGE_SIZE)
+ n = PAGE_SIZE;
+ if (!dump_write(file, buf, n)) {
+ ret = 0;
+ break;
+ }
+ off -= n;
+ }
+ free_page((unsigned long)buf);
+ }
+ return ret;
+}
+EXPORT_SYMBOL(dump_seek);
unsigned nr_pages;
unsigned long length;
loff_t pg_first; /* keep 64bit also in 32-arches */
+ bool read_4_write; /* This means two things: that the read is sync
+ * And the pages should not be unlocked.
+ */
};
static void _pcol_init(struct page_collect *pcol, unsigned expected_pages,
pcol->nr_pages = 0;
pcol->length = 0;
pcol->pg_first = -1;
+ pcol->read_4_write = false;
}
static void _pcol_reset(struct page_collect *pcol)
if (PageError(page))
ClearPageError(page);
- unlock_page(page);
+ if (!pcol->read_4_write)
+ unlock_page(page);
EXOFS_DBGMSG("readpage_strip(0x%lx, 0x%lx) empty page,"
" splitting\n", inode->i_ino, page->index);
/* readpage_strip might call read_exec(,is_sync==false) at several
* places but not if we have a single page.
*/
+ pcol.read_4_write = is_sync;
ret = readpage_strip(&pcol, page);
if (ret) {
EXOFS_ERR("_readpage => %d\n", ret);
#define CREATE_TRACE_POINTS
#include <trace/events/writeback.h>
-#define inode_to_bdi(inode) ((inode)->i_mapping->backing_dev_info)
-
/*
* We don't actually have pdflush, but this one is exported though /proc...
*/
return test_bit(BDI_writeback_running, &bdi->state);
}
+static inline struct backing_dev_info *inode_to_bdi(struct inode *inode)
+{
+ struct super_block *sb = inode->i_sb;
+
+ if (strcmp(sb->s_type->name, "bdev") == 0)
+ return inode->i_mapping->backing_dev_info;
+
+ return sb->s_bdi;
+}
+
static void bdi_queue_work(struct backing_dev_info *bdi,
struct wb_writeback_work *work)
{
loff_t file_size;
unsigned int num;
unsigned int offset;
- size_t total_len;
+ size_t total_len = 0;
req = fuse_get_req(fc);
if (IS_ERR(req))
static inline void
fh_unlock(struct svc_fh *fhp)
{
- BUG_ON(!fhp->fh_dentry);
-
if (fhp->fh_locked) {
fill_post_wcc(fhp);
mutex_unlock(&fhp->fh_dentry->d_inode->i_mutex);
source "fs/notify/dnotify/Kconfig"
source "fs/notify/inotify/Kconfig"
-source "fs/notify/fanotify/Kconfig"
+#source "fs/notify/fanotify/Kconfig"
}
inode->i_mode = new_mode;
+ inode->i_ctime = CURRENT_TIME;
di->i_mode = cpu_to_le16(inode->i_mode);
+ di->i_ctime = cpu_to_le64(inode->i_ctime.tv_sec);
+ di->i_ctime_nsec = cpu_to_le32(inode->i_ctime.tv_nsec);
ocfs2_journal_dirty(handle, di_bh);
int o2net_send_message_vec(u32 msg_type, u32 key, struct kvec *caller_vec,
size_t caller_veclen, u8 target_node, int *status)
{
- int ret;
+ int ret = 0;
struct o2net_msg *msg = NULL;
size_t veclen, caller_bytes = 0;
struct kvec *vec = NULL;
goto out_commit;
}
+ cpos = split_hash;
+ ret = ocfs2_dx_dir_new_cluster(dir, &et, cpos, handle,
+ data_ac, meta_ac, new_dx_leaves,
+ num_dx_leaves);
+ if (ret) {
+ mlog_errno(ret);
+ goto out_commit;
+ }
+
for (i = 0; i < num_dx_leaves; i++) {
ret = ocfs2_journal_access_dl(handle, INODE_CACHE(dir),
orig_dx_leaves[i],
mlog_errno(ret);
goto out_commit;
}
- }
- cpos = split_hash;
- ret = ocfs2_dx_dir_new_cluster(dir, &et, cpos, handle,
- data_ac, meta_ac, new_dx_leaves,
- num_dx_leaves);
- if (ret) {
- mlog_errno(ret);
- goto out_commit;
+ ret = ocfs2_journal_access_dl(handle, INODE_CACHE(dir),
+ new_dx_leaves[i],
+ OCFS2_JOURNAL_ACCESS_WRITE);
+ if (ret) {
+ mlog_errno(ret);
+ goto out_commit;
+ }
}
ocfs2_dx_dir_transfer_leaf(dir, split_hash, handle, tmp_dx_leaf,
struct dlm_lock_resource *res);
void dlm_clean_master_list(struct dlm_ctxt *dlm,
u8 dead_node);
+void dlm_force_free_mles(struct dlm_ctxt *dlm);
int dlm_lock_basts_flushed(struct dlm_ctxt *dlm, struct dlm_lock *lock);
int __dlm_lockres_has_locks(struct dlm_lock_resource *res);
int __dlm_lockres_unused(struct dlm_lock_resource *res);
spin_lock(&dlm->track_lock);
if (oldres)
track_list = &oldres->tracking;
- else
+ else {
track_list = &dlm->tracking_list;
+ if (list_empty(track_list)) {
+ dl = NULL;
+ spin_unlock(&dlm->track_lock);
+ goto bail;
+ }
+ }
list_for_each_entry(res, track_list, tracking) {
if (&res->tracking == &dlm->tracking_list)
} else
dl = NULL;
+bail:
/* passed to seq_show */
return dl;
}
dlm_mark_domain_leaving(dlm);
dlm_leave_domain(dlm);
+ dlm_force_free_mles(dlm);
dlm_complete_dlm_shutdown(dlm);
}
dlm_put(dlm);
wake_up(&res->wq);
wake_up(&dlm->migration_wq);
}
+
+void dlm_force_free_mles(struct dlm_ctxt *dlm)
+{
+ int i;
+ struct hlist_head *bucket;
+ struct dlm_master_list_entry *mle;
+ struct hlist_node *tmp, *list;
+
+ /*
+ * We notified all other nodes that we are exiting the domain and
+ * marked the dlm state to DLM_CTXT_LEAVING. If any mles are still
+ * around we force free them and wake any processes that are waiting
+ * on the mles
+ */
+ spin_lock(&dlm->spinlock);
+ spin_lock(&dlm->master_lock);
+
+ BUG_ON(dlm->dlm_state != DLM_CTXT_LEAVING);
+ BUG_ON((find_next_bit(dlm->domain_map, O2NM_MAX_NODES, 0) < O2NM_MAX_NODES));
+
+ for (i = 0; i < DLM_HASH_BUCKETS; i++) {
+ bucket = dlm_master_hash(dlm, i);
+ hlist_for_each_safe(list, tmp, bucket) {
+ mle = hlist_entry(list, struct dlm_master_list_entry,
+ master_hash_node);
+ if (mle->type != DLM_MLE_BLOCK) {
+ mlog(ML_ERROR, "bad mle: %p\n", mle);
+ dlm_print_one_mle(mle);
+ }
+ atomic_set(&mle->woken, 1);
+ wake_up(&mle->wq);
+
+ __dlm_unlink_mle(dlm, mle);
+ __dlm_mle_detach_hb_events(dlm, mle);
+ __dlm_put_mle(mle);
+ }
+ }
+ spin_unlock(&dlm->master_lock);
+ spin_unlock(&dlm->spinlock);
+}
OI_LS_PARENT,
OI_LS_RENAME1,
OI_LS_RENAME2,
+ OI_LS_REFLINK_TARGET,
};
int ocfs2_dlm_init(struct ocfs2_super *osb);
#define OCFS2_HAS_REFCOUNT_FL (0x0010)
/* Inode attributes, keep in sync with EXT2 */
-#define OCFS2_SECRM_FL (0x00000001) /* Secure deletion */
-#define OCFS2_UNRM_FL (0x00000002) /* Undelete */
-#define OCFS2_COMPR_FL (0x00000004) /* Compress file */
-#define OCFS2_SYNC_FL (0x00000008) /* Synchronous updates */
-#define OCFS2_IMMUTABLE_FL (0x00000010) /* Immutable file */
-#define OCFS2_APPEND_FL (0x00000020) /* writes to file may only append */
-#define OCFS2_NODUMP_FL (0x00000040) /* do not dump file */
-#define OCFS2_NOATIME_FL (0x00000080) /* do not update atime */
-#define OCFS2_DIRSYNC_FL (0x00010000) /* dirsync behaviour (directories only) */
-
-#define OCFS2_FL_VISIBLE (0x000100FF) /* User visible flags */
-#define OCFS2_FL_MODIFIABLE (0x000100FF) /* User modifiable flags */
+#define OCFS2_SECRM_FL FS_SECRM_FL /* Secure deletion */
+#define OCFS2_UNRM_FL FS_UNRM_FL /* Undelete */
+#define OCFS2_COMPR_FL FS_COMPR_FL /* Compress file */
+#define OCFS2_SYNC_FL FS_SYNC_FL /* Synchronous updates */
+#define OCFS2_IMMUTABLE_FL FS_IMMUTABLE_FL /* Immutable file */
+#define OCFS2_APPEND_FL FS_APPEND_FL /* writes to file may only append */
+#define OCFS2_NODUMP_FL FS_NODUMP_FL /* do not dump file */
+#define OCFS2_NOATIME_FL FS_NOATIME_FL /* do not update atime */
+/* Reserved for compression usage... */
+#define OCFS2_DIRTY_FL FS_DIRTY_FL
+#define OCFS2_COMPRBLK_FL FS_COMPRBLK_FL /* One or more compressed clusters */
+#define OCFS2_NOCOMP_FL FS_NOCOMP_FL /* Don't compress */
+#define OCFS2_ECOMPR_FL FS_ECOMPR_FL /* Compression error */
+/* End compression flags --- maybe not all used */
+#define OCFS2_BTREE_FL FS_BTREE_FL /* btree format dir */
+#define OCFS2_INDEX_FL FS_INDEX_FL /* hash-indexed directory */
+#define OCFS2_IMAGIC_FL FS_IMAGIC_FL /* AFS directory */
+#define OCFS2_JOURNAL_DATA_FL FS_JOURNAL_DATA_FL /* Reserved for ext3 */
+#define OCFS2_NOTAIL_FL FS_NOTAIL_FL /* file tail should not be merged */
+#define OCFS2_DIRSYNC_FL FS_DIRSYNC_FL /* dirsync behaviour (directories only) */
+#define OCFS2_TOPDIR_FL FS_TOPDIR_FL /* Top of directory hierarchies*/
+#define OCFS2_RESERVED_FL FS_RESERVED_FL /* reserved for ext2 lib */
+
+#define OCFS2_FL_VISIBLE FS_FL_USER_VISIBLE /* User visible flags */
+#define OCFS2_FL_MODIFIABLE FS_FL_USER_MODIFIABLE /* User modifiable flags */
/*
* Extent record flags (e_node.leaf.flags)
/*
* ioctl commands
*/
-#define OCFS2_IOC_GETFLAGS _IOR('f', 1, long)
-#define OCFS2_IOC_SETFLAGS _IOW('f', 2, long)
-#define OCFS2_IOC32_GETFLAGS _IOR('f', 1, int)
-#define OCFS2_IOC32_SETFLAGS _IOW('f', 2, int)
+#define OCFS2_IOC_GETFLAGS FS_IOC_GETFLAGS
+#define OCFS2_IOC_SETFLAGS FS_IOC_SETFLAGS
+#define OCFS2_IOC32_GETFLAGS FS_IOC32_GETFLAGS
+#define OCFS2_IOC32_SETFLAGS FS_IOC32_SETFLAGS
/*
* Space reservation / allocation / free ioctls and argument structure
goto out;
}
- mutex_lock(&new_inode->i_mutex);
- ret = ocfs2_inode_lock(new_inode, &new_bh, 1);
+ mutex_lock_nested(&new_inode->i_mutex, I_MUTEX_CHILD);
+ ret = ocfs2_inode_lock_nested(new_inode, &new_bh, 1,
+ OI_LS_REFLINK_TARGET);
if (ret) {
mlog_errno(ret);
goto out_unlock;
struct ocfs2_alloc_reservation *resv,
int *cstart, int *clen)
{
- unsigned int wanted = *clen;
-
if (resv == NULL || ocfs2_resmap_disabled(resmap))
return -ENOSPC;
spin_lock(&resv_lock);
- /*
- * We don't want to over-allocate for temporary
- * windows. Otherwise, we run the risk of fragmenting the
- * allocation space.
- */
- wanted = ocfs2_resv_window_bits(resmap, resv);
- if ((resv->r_flags & OCFS2_RESV_FLAG_TMP) || wanted < *clen)
- wanted = *clen;
-
if (ocfs2_resv_empty(resv)) {
- mlog(0, "empty reservation, find new window\n");
+ /*
+ * We don't want to over-allocate for temporary
+ * windows. Otherwise, we run the risk of fragmenting the
+ * allocation space.
+ */
+ unsigned int wanted = ocfs2_resv_window_bits(resmap, resv);
+ if ((resv->r_flags & OCFS2_RESV_FLAG_TMP) || wanted < *clen)
+ wanted = *clen;
+
+ mlog(0, "empty reservation, find new window\n");
/*
* Try to get a window here. If it works, we must fall
* through and test the bitmap . This avoids some
static void ocfs2_bg_discontig_add_extent(struct ocfs2_super *osb,
struct ocfs2_group_desc *bg,
struct ocfs2_chain_list *cl,
- u64 p_blkno, u32 clusters)
+ u64 p_blkno, unsigned int clusters)
{
struct ocfs2_extent_list *el = &bg->bg_list;
struct ocfs2_extent_rec *rec;
rec->e_blkno = cpu_to_le64(p_blkno);
rec->e_cpos = cpu_to_le32(le16_to_cpu(bg->bg_bits) /
le16_to_cpu(cl->cl_bpc));
- rec->e_leaf_clusters = cpu_to_le32(clusters);
+ rec->e_leaf_clusters = cpu_to_le16(clusters);
le16_add_cpu(&bg->bg_bits, clusters * le16_to_cpu(cl->cl_bpc));
le16_add_cpu(&bg->bg_free_bits_count,
clusters * le16_to_cpu(cl->cl_bpc));
}
/* Fast symlinks can't be large */
- len = strlen(target);
+ len = strnlen(target, ocfs2_fast_symlink_chars(inode->i_sb));
link = kzalloc(len + 1, GFP_NOFS);
if (!link) {
status = -ENOMEM;
xis.inode_bh = xbs.inode_bh = di_bh;
di = (struct ocfs2_dinode *)di_bh->b_data;
- down_read(&oi->ip_xattr_sem);
ret = ocfs2_xattr_ibody_get(inode, name_index, name, buffer,
buffer_size, &xis);
if (ret == -ENODATA && di->i_xattr_loc)
ret = ocfs2_xattr_block_get(inode, name_index, name, buffer,
buffer_size, &xbs);
- up_read(&oi->ip_xattr_sem);
return ret;
}
mlog_errno(ret);
return ret;
}
+ down_read(&OCFS2_I(inode)->ip_xattr_sem);
ret = ocfs2_xattr_get_nolock(inode, di_bh, name_index,
name, buffer, buffer_size);
+ up_read(&OCFS2_I(inode)->ip_xattr_sem);
ocfs2_inode_unlock(inode, 0);
INF("auxv", S_IRUSR, proc_pid_auxv),
ONE("status", S_IRUGO, proc_pid_status),
ONE("personality", S_IRUSR, proc_pid_personality),
- INF("limits", S_IRUSR, proc_pid_limits),
+ INF("limits", S_IRUGO, proc_pid_limits),
#ifdef CONFIG_SCHED_DEBUG
REG("sched", S_IRUGO|S_IWUSR, proc_pid_sched_operations),
#endif
INF("auxv", S_IRUSR, proc_pid_auxv),
ONE("status", S_IRUGO, proc_pid_status),
ONE("personality", S_IRUSR, proc_pid_personality),
- INF("limits", S_IRUSR, proc_pid_limits),
+ INF("limits", S_IRUGO, proc_pid_limits),
#ifdef CONFIG_SCHED_DEBUG
REG("sched", S_IRUGO|S_IWUSR, proc_pid_sched_operations),
#endif
mss->referenced += PAGE_SIZE;
mapcount = page_mapcount(page);
if (mapcount >= 2) {
- if (pte_dirty(ptent))
+ if (pte_dirty(ptent) || PageDirty(page))
mss->shared_dirty += PAGE_SIZE;
else
mss->shared_clean += PAGE_SIZE;
mss->pss += (PAGE_SIZE << PSS_SHIFT) / mapcount;
} else {
- if (pte_dirty(ptent))
+ if (pte_dirty(ptent) || PageDirty(page))
mss->private_dirty += PAGE_SIZE;
else
mss->private_clean += PAGE_SIZE;
static const struct file_operations proc_vmcore_operations = {
.read = read_vmcore,
- .llseek = generic_file_llseek,
+ .llseek = default_llseek,
};
static struct vmcore* __init get_new_element(void)
int reiserfs_unpack(struct inode *inode, struct file *filp)
{
int retval = 0;
+ int depth;
int index;
struct page *page;
struct address_space *mapping;
/* we need to make sure nobody is changing the file size beneath
** us
*/
- mutex_lock(&inode->i_mutex);
- reiserfs_write_lock(inode->i_sb);
+ reiserfs_mutex_lock_safe(&inode->i_mutex, inode->i_sb);
+ depth = reiserfs_write_lock_once(inode->i_sb);
write_from = inode->i_size & (blocksize - 1);
/* if we are on a block boundary, we are already unpacked. */
out:
mutex_unlock(&inode->i_mutex);
- reiserfs_write_unlock(inode->i_sb);
+ reiserfs_write_unlock_once(inode->i_sb, depth);
return retval;
}
xfs_perag_put(pag);
}
-void
-__xfs_inode_clear_reclaim_tag(
- xfs_mount_t *mp,
+STATIC void
+__xfs_inode_clear_reclaim(
xfs_perag_t *pag,
xfs_inode_t *ip)
{
- radix_tree_tag_clear(&pag->pag_ici_root,
- XFS_INO_TO_AGINO(mp, ip->i_ino), XFS_ICI_RECLAIM_TAG);
pag->pag_ici_reclaimable--;
if (!pag->pag_ici_reclaimable) {
/* clear the reclaim tag from the perag radix tree */
}
}
+void
+__xfs_inode_clear_reclaim_tag(
+ xfs_mount_t *mp,
+ xfs_perag_t *pag,
+ xfs_inode_t *ip)
+{
+ radix_tree_tag_clear(&pag->pag_ici_root,
+ XFS_INO_TO_AGINO(mp, ip->i_ino), XFS_ICI_RECLAIM_TAG);
+ __xfs_inode_clear_reclaim(pag, ip);
+}
+
/*
* Inodes in different states need to be treated differently, and the return
* value of xfs_iflush is not sufficient to get this right. The following table
if (!radix_tree_delete(&pag->pag_ici_root,
XFS_INO_TO_AGINO(ip->i_mount, ip->i_ino)))
ASSERT(0);
+ __xfs_inode_clear_reclaim(pag, ip);
write_unlock(&pag->pag_ici_lock);
/*
new_ctx = kmem_zalloc(sizeof(*new_ctx), KM_SLEEP|KM_NOFS);
new_ctx->ticket = xlog_cil_ticket_alloc(log);
- /* lock out transaction commit, but don't block on background push */
+ /*
+ * Lock out transaction commit, but don't block for background pushes
+ * unless we are well over the CIL space limit. See the definition of
+ * XLOG_CIL_HARD_SPACE_LIMIT() for the full explanation of the logic
+ * used here.
+ */
if (!down_write_trylock(&cil->xc_ctx_lock)) {
- if (!push_seq)
+ if (!push_seq &&
+ cil->xc_ctx->space_used < XLOG_CIL_HARD_SPACE_LIMIT(log))
goto out_free_ticket;
down_write(&cil->xc_ctx_lock);
}
goto out_skip;
/* check for a previously pushed seqeunce */
- if (push_seq < cil->xc_ctx->sequence)
+ if (push_seq && push_seq < cil->xc_ctx->sequence)
goto out_skip;
/*
};
/*
- * The amount of log space we should the CIL to aggregate is difficult to size.
- * Whatever we chose we have to make we can get a reservation for the log space
- * effectively, that it is large enough to capture sufficient relogging to
- * reduce log buffer IO significantly, but it is not too large for the log or
- * induces too much latency when writing out through the iclogs. We track both
- * space consumed and the number of vectors in the checkpoint context, so we
- * need to decide which to use for limiting.
+ * The amount of log space we allow the CIL to aggregate is difficult to size.
+ * Whatever we choose, we have to make sure we can get a reservation for the
+ * log space effectively, that it is large enough to capture sufficient
+ * relogging to reduce log buffer IO significantly, but it is not too large for
+ * the log or induces too much latency when writing out through the iclogs. We
+ * track both space consumed and the number of vectors in the checkpoint
+ * context, so we need to decide which to use for limiting.
*
* Every log buffer we write out during a push needs a header reserved, which
* is at least one sector and more for v2 logs. Hence we need a reservation of
* checkpoint transaction ticket is specific to the checkpoint context, rather
* than the CIL itself.
*
- * With dynamic reservations, we can basically make up arbitrary limits for the
- * checkpoint size so long as they don't violate any other size rules. Hence
- * the initial maximum size for the checkpoint transaction will be set to a
- * quarter of the log or 8MB, which ever is smaller. 8MB is an arbitrary limit
- * right now based on the latency of writing out a large amount of data through
- * the circular iclog buffers.
+ * With dynamic reservations, we can effectively make up arbitrary limits for
+ * the checkpoint size so long as they don't violate any other size rules.
+ * Recovery imposes a rule that no transaction exceed half the log, so we are
+ * limited by that. Furthermore, the log transaction reservation subsystem
+ * tries to keep 25% of the log free, so we need to keep below that limit or we
+ * risk running out of free log space to start any new transactions.
+ *
+ * In order to keep background CIL push efficient, we will set a lower
+ * threshold at which background pushing is attempted without blocking current
+ * transaction commits. A separate, higher bound defines when CIL pushes are
+ * enforced to ensure we stay within our maximum checkpoint size bounds.
+ * threshold, yet give us plenty of space for aggregation on large logs.
*/
-
-#define XLOG_CIL_SPACE_LIMIT(log) \
- (min((log->l_logsize >> 2), (8 * 1024 * 1024)))
+#define XLOG_CIL_SPACE_LIMIT(log) (log->l_logsize >> 3)
+#define XLOG_CIL_HARD_SPACE_LIMIT(log) (3 * (log->l_logsize >> 4))
/*
* The reservation head lsn is not made up of a cycle number and block number.
#define acpi_device_bid(d) ((d)->pnp.bus_id)
#define acpi_device_adr(d) ((d)->pnp.bus_address)
-char *acpi_device_hid(struct acpi_device *device);
+const char *acpi_device_hid(struct acpi_device *device);
#define acpi_device_name(d) ((d)->pnp.device_name)
#define acpi_device_class(d) ((d)->pnp.device_class)
int acpi_enable_wakeup_device_power(struct acpi_device *dev, int state);
int acpi_disable_wakeup_device_power(struct acpi_device *dev);
-#ifdef CONFIG_PM_SLEEP
+#ifdef CONFIG_PM_OPS
int acpi_pm_device_sleep_state(struct device *, int *);
-int acpi_pm_device_sleep_wake(struct device *, bool);
-#else /* !CONFIG_PM_SLEEP */
+#else
static inline int acpi_pm_device_sleep_state(struct device *d, int *p)
{
if (p)
*p = ACPI_STATE_D0;
return ACPI_STATE_D3;
}
+#endif
+
+#ifdef CONFIG_PM_SLEEP
+int acpi_pm_device_sleep_wake(struct device *, bool);
+#else
static inline int acpi_pm_device_sleep_wake(struct device *dev, bool enable)
{
return -ENODEV;
}
-#endif /* !CONFIG_PM_SLEEP */
+#endif
#endif /* CONFIG_ACPI */
*/
acpi_status
acpi_os_read_pci_configuration(struct acpi_pci_id *pci_id,
- u32 reg, u32 *value, u32 width);
+ u32 reg, u64 *value, u32 width);
acpi_status
acpi_os_write_pci_configuration(struct acpi_pci_id *pci_id,
u32 reg, u64 value, u32 width);
-/*
- * Interim function needed for PCI IRQ routing
- */
-void
-acpi_os_derive_pci_id(acpi_handle device,
- acpi_handle region, struct acpi_pci_id **pci_id);
-
/*
* Miscellaneous
*/
-acpi_status acpi_os_validate_interface(char *interface);
-acpi_status acpi_osi_invalidate(char* interface);
-
acpi_status
acpi_os_validate_address(u8 space_id, acpi_physical_address address,
acpi_size length, char *name);
/* Current ACPICA subsystem version in YYYYMMDD format */
-#define ACPI_CA_VERSION 0x20100702
+#define ACPI_CA_VERSION 0x20101013
#include "actypes.h"
#include "actbl.h"
extern u8 acpi_gbl_permanent_mmap;
/*
- * Globals that are publically available, allowing for
+ * Globals that are publicly available, allowing for
* run time configuration
*/
extern u32 acpi_dbg_level;
extern u32 acpi_current_gpe_count;
extern struct acpi_table_fadt acpi_gbl_FADT;
+extern u8 acpi_gbl_system_awake_and_running;
extern u32 acpi_rsdt_forced;
/*
acpi_status acpi_purge_cached_objects(void);
+acpi_status acpi_install_interface(acpi_string interface_name);
+
+acpi_status acpi_remove_interface(acpi_string interface_name);
+
/*
* ACPI Memory management
*/
acpi_status acpi_install_exception_handler(acpi_exception_handler handler);
#endif
+acpi_status acpi_install_interface_handler(acpi_interface_handler handler);
+
/*
* Event interfaces
*/
*
* ACPI_SIZE 16/32/64-bit unsigned value
* ACPI_NATIVE_INT 16/32/64-bit signed value
- *
*/
/*******************************************************************************
/*! [End] no source code translation !*/
+/*
+ * Value returned by acpi_os_get_thread_id. There is no standard "thread_id"
+ * across operating systems or even the various UNIX systems. Since ACPICA
+ * only needs the thread ID as a unique thread identifier, we use a u64
+ * as the only common data type - it will accommodate any type of pointer or
+ * any type of integer. It is up to the host-dependent OSL to cast the
+ * native thread ID type to a u64 (in acpi_os_get_thread_id).
+ */
+#define acpi_thread_id u64
+
/*******************************************************************************
*
* Types specific to 64-bit targets
*
******************************************************************************/
-/* Value returned by acpi_os_get_thread_id */
-
-#ifndef acpi_thread_id
-#define acpi_thread_id acpi_size
-#endif
-
/* Flags for acpi_os_acquire_lock/acpi_os_release_lock */
#ifndef acpi_cpu_flags
typedef u8 acpi_owner_id;
#define ACPI_OWNER_ID_MAX 0xFF
-struct uint64_struct {
- u32 lo;
- u32 hi;
-};
-
-union uint64_overlay {
- u64 full;
- struct uint64_struct part;
-};
-
#define ACPI_INTEGER_BIT_SIZE 64
#define ACPI_MAX_DECIMAL_DIGITS 20 /* 2^64 = 18,446,744,073,709,551,616 */
u32 nesting_level,
void *context, void **return_value);
+typedef
+u32 (*acpi_interface_handler) (acpi_string interface_name, u32 supported);
+
/* Interrupt handler return values */
#define ACPI_INTERRUPT_NOT_HANDLED 0x00
#define ACPI_MUTEX_TYPE ACPI_BINARY_SEMAPHORE
#endif
+/* "inline" keywords - configurable since inline is not standardized */
+
+#ifndef ACPI_INLINE
+#define ACPI_INLINE
+#endif
+
/*
* Debugger threading model
* Use single threaded if the entire subsystem is contained in an application
#ifndef __ACGCC_H__
#define __ACGCC_H__
+#define ACPI_INLINE __inline__
+
/* Function name is used for debug output. Non-ANSI, compiler-dependent */
#define ACPI_GET_FUNCTION_NAME __func__
#define acpi_cache_t struct kmem_cache
#define acpi_spinlock spinlock_t *
#define acpi_cpu_flags unsigned long
-#define acpi_thread_id struct task_struct *
#else /* !__KERNEL__ */
/* Host-dependent types and defines for user-space ACPICA */
#define ACPI_FLUSH_CPU_CACHE()
-#define acpi_thread_id pthread_t
+#define ACPI_CAST_PTHREAD_T(pthread) ((acpi_thread_id) (pthread))
#if defined(__ia64__) || defined(__x86_64__)
#define ACPI_MACHINE_WIDTH 64
#ifdef __KERNEL__
+#include <acpi/actypes.h>
/*
* Overrides for in-kernel ACPICA
*/
static inline acpi_thread_id acpi_os_get_thread_id(void)
{
- return current;
+ return (acpi_thread_id)(unsigned long)current;
}
/*
* However, boot has (system_state != SYSTEM_RUNNING)
* to quiet __might_sleep() in kmalloc() and resume does not.
*/
-#include <acpi/actypes.h>
static inline void *acpi_os_allocate(acpi_size size)
{
return kmalloc(size, irqs_disabled() ? GFP_ATOMIC : GFP_KERNEL);
struct kref refcount;
/** Handle count of this object. Each handle also holds a reference */
- struct kref handlecount;
+ atomic_t handle_count; /* number of handles on this object */
/** Related drm device */
struct drm_device *dev;
*/
int (*gem_init_object) (struct drm_gem_object *obj);
void (*gem_free_object) (struct drm_gem_object *obj);
- void (*gem_free_object_unlocked) (struct drm_gem_object *obj);
/* vga arb irq handler */
void (*vgaarb_irq)(struct drm_device *dev, bool state);
extern int drm_mmap(struct file *filp, struct vm_area_struct *vma);
extern int drm_mmap_locked(struct file *filp, struct vm_area_struct *vma);
extern void drm_vm_open_locked(struct vm_area_struct *vma);
+extern void drm_vm_close_locked(struct vm_area_struct *vma);
extern resource_size_t drm_core_get_map_ofs(struct drm_local_map * map);
extern resource_size_t drm_core_get_reg_ofs(struct drm_device *dev);
extern unsigned int drm_poll(struct file *filp, struct poll_table_struct *wait);
void drm_gem_destroy(struct drm_device *dev);
void drm_gem_object_release(struct drm_gem_object *obj);
void drm_gem_object_free(struct kref *kref);
-void drm_gem_object_free_unlocked(struct kref *kref);
struct drm_gem_object *drm_gem_object_alloc(struct drm_device *dev,
size_t size);
int drm_gem_object_init(struct drm_device *dev,
struct drm_gem_object *obj, size_t size);
-void drm_gem_object_handle_free(struct kref *kref);
+void drm_gem_object_handle_free(struct drm_gem_object *obj);
void drm_gem_vm_open(struct vm_area_struct *vma);
void drm_gem_vm_close(struct vm_area_struct *vma);
int drm_gem_mmap(struct file *filp, struct vm_area_struct *vma);
static inline void
drm_gem_object_unreference_unlocked(struct drm_gem_object *obj)
{
- if (obj != NULL)
- kref_put(&obj->refcount, drm_gem_object_free_unlocked);
+ if (obj != NULL) {
+ struct drm_device *dev = obj->dev;
+ mutex_lock(&dev->struct_mutex);
+ kref_put(&obj->refcount, drm_gem_object_free);
+ mutex_unlock(&dev->struct_mutex);
+ }
}
int drm_gem_handle_create(struct drm_file *file_priv,
drm_gem_object_handle_reference(struct drm_gem_object *obj)
{
drm_gem_object_reference(obj);
- kref_get(&obj->handlecount);
+ atomic_inc(&obj->handle_count);
}
static inline void
if (obj == NULL)
return;
+ if (atomic_read(&obj->handle_count) == 0)
+ return;
/*
* Must bump handle count first as this may be the last
* ref, in which case the object would disappear before we
* checked for a name
*/
- kref_put(&obj->handlecount, drm_gem_object_handle_free);
+ if (atomic_dec_and_test(&obj->handle_count))
+ drm_gem_object_handle_free(obj);
drm_gem_object_unreference(obj);
}
if (obj == NULL)
return;
+ if (atomic_read(&obj->handle_count) == 0)
+ return;
+
/*
* Must bump handle count first as this may be the last
* ref, in which case the object would disappear before we
* checked for a name
*/
- kref_put(&obj->handlecount, drm_gem_object_handle_free);
+
+ if (atomic_dec_and_test(&obj->handle_count))
+ drm_gem_object_handle_free(obj);
drm_gem_object_unreference_unlocked(obj);
}
{0x1002, 0x5460, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV380|RADEON_IS_MOBILITY}, \
{0x1002, 0x5462, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV380|RADEON_IS_MOBILITY}, \
{0x1002, 0x5464, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV380|RADEON_IS_MOBILITY}, \
- {0x1002, 0x5657, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV380|RADEON_NEW_MEMMAP}, \
{0x1002, 0x5548, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R423|RADEON_NEW_MEMMAP}, \
{0x1002, 0x5549, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R423|RADEON_NEW_MEMMAP}, \
{0x1002, 0x554A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R423|RADEON_NEW_MEMMAP}, \
{0x1002, 0x564F, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV410|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
{0x1002, 0x5652, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV410|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
{0x1002, 0x5653, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV410|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x5657, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV410|RADEON_NEW_MEMMAP}, \
{0x1002, 0x5834, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS300|RADEON_IS_IGP}, \
{0x1002, 0x5835, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS300|RADEON_IS_IGP|RADEON_IS_MOBILITY}, \
{0x1002, 0x5954, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS480|RADEON_IS_IGP|RADEON_IS_MOBILITY|RADEON_IS_IGPGART}, \
atomic_t reserved;
-
/**
* Members protected by the bo::lock
+ * In addition, setting sync_obj to anything else
+ * than NULL requires bo::reserved to be held. This allows for
+ * checking NULL while reserved but not holding bo::lock.
*/
void *sync_obj_arg;
header-y += ext2_fs.h
header-y += fadvise.h
header-y += falloc.h
-header-y += fanotify.h
header-y += fb.h
header-y += fcntl.h
header-y += fd.h
* These are the only things you should do on a core-file: use only these
* functions to write out all the necessary info.
*/
-static inline int dump_write(struct file *file, const void *addr, int nr)
-{
- return file->f_op->write(file, addr, nr, &file->f_pos) == nr;
-}
-
-static inline int dump_seek(struct file *file, loff_t off)
-{
- int ret = 1;
-
- if (file->f_op->llseek && file->f_op->llseek != no_llseek) {
- if (file->f_op->llseek(file, off, SEEK_CUR) < 0)
- return 0;
- } else {
- char *buf = (char *)get_zeroed_page(GFP_KERNEL);
-
- if (!buf)
- return 0;
- while (off > 0) {
- unsigned long n = off;
-
- if (n > PAGE_SIZE)
- n = PAGE_SIZE;
- if (!dump_write(file, buf, n)) {
- ret = 0;
- break;
- }
- off -= n;
- }
- free_page((unsigned long)buf);
- }
- return ret;
-}
+extern int dump_write(struct file *file, const void *addr, int nr);
+extern int dump_seek(struct file *file, loff_t off);
#endif /* _LINUX_COREDUMP_H */
#define CPUIDLE_FLAG_BALANCED (0x40) /* medium latency, moderate savings */
#define CPUIDLE_FLAG_DEEP (0x80) /* high latency, large savings */
#define CPUIDLE_FLAG_IGNORE (0x100) /* ignore during this idle period */
+#define CPUIDLE_FLAG_TLB_FLUSHED (0x200) /* tlb will be flushed */
#define CPUIDLE_DRIVER_FLAGS_MASK (0xFFFF0000)
return DMA_BIT_MASK(32);
}
+#ifdef ARCH_HAS_DMA_SET_COHERENT_MASK
+int dma_set_coherent_mask(struct device *dev, u64 mask);
+#else
static inline int dma_set_coherent_mask(struct device *dev, u64 mask)
{
if (!dma_supported(dev, mask))
dev->coherent_dma_mask = mask;
return 0;
}
+#endif
extern u64 dma_get_required_mask(struct device *dev);
return (dma->max_pq & DMA_HAS_PQ_CONTINUE) == DMA_HAS_PQ_CONTINUE;
}
-static unsigned short dma_dev_to_maxpq(struct dma_device *dma)
+static inline unsigned short dma_dev_to_maxpq(struct dma_device *dma)
{
return dma->max_pq & ~DMA_HAS_PQ_CONTINUE;
}
struct elevator_type *elevator_type;
struct mutex sysfs_lock;
struct hlist_head *hash;
+ unsigned int registered:1;
};
/*
#include <linux/fcntl.h>
+/* temporary stubs for BKL removal */
+#define lock_flocks() lock_kernel()
+#define unlock_flocks() unlock_kernel()
+
extern void send_sigio(struct fown_struct *fown, int fd, int band);
#ifdef CONFIG_FILE_LOCKING
#ifdef CONFIG_GENERIC_BUG
-int module_bug_finalize(const Elf_Ehdr *, const Elf_Shdr *,
+void module_bug_finalize(const Elf_Ehdr *, const Elf_Shdr *,
struct module *);
void module_bug_cleanup(struct module *);
#else /* !CONFIG_GENERIC_BUG */
-static inline int module_bug_finalize(const Elf_Ehdr *hdr,
+static inline void module_bug_finalize(const Elf_Ehdr *hdr,
const Elf_Shdr *sechdrs,
struct module *mod)
{
- return 0;
}
static inline void module_bug_cleanup(struct module *mod) {}
#endif /* CONFIG_GENERIC_BUG */
#define MAX_LINKS 32
-struct net;
-
struct sockaddr_nl {
sa_family_t nl_family; /* AF_NETLINK */
unsigned short nl_pad; /* zero */
#include <linux/capability.h>
#include <linux/skbuff.h>
+struct net;
+
static inline struct nlmsghdr *nlmsg_hdr(const struct sk_buff *skb)
{
return (struct nlmsghdr *)skb->data;
#define PCI_DEVICE_ID_VLSI_82C147 0x0105
#define PCI_DEVICE_ID_VLSI_VAS96011 0x0702
+/* AMD RD890 Chipset */
+#define PCI_DEVICE_ID_RD890_IOMMU 0x5a23
+
#define PCI_VENDOR_ID_ADL 0x1005
#define PCI_DEVICE_ID_ADL_2301 0x2301
* Makes rcu_dereference_check() do the dirty work.
*/
#define rcu_dereference_bh(p) \
- rcu_dereference_check(p, rcu_read_lock_bh_held())
+ rcu_dereference_check(p, rcu_read_lock_bh_held() || irqs_disabled())
/**
* rcu_dereference_sched - fetch RCU-protected pointer, checking for RCU-sched
int offset,
unsigned int len, __wsum *csump);
-extern int verify_iovec(struct msghdr *m, struct iovec *iov, struct sockaddr *address, int mode);
+extern long verify_iovec(struct msghdr *m, struct iovec *iov, struct sockaddr *address, int mode);
extern int memcpy_toiovec(struct iovec *v, unsigned char *kdata, int len);
extern int memcpy_toiovecend(const struct iovec *v, unsigned char *kdata,
int offset, int len);
typedef __s64 int64_t;
#endif
-/* this is a special 64bit data type that is 8-byte aligned */
+/*
+ * aligned_u64 should be used in defining kernel<->userspace ABIs to avoid
+ * common 32/64-bit compat problems.
+ * 64-bit values align to 4-byte boundaries on x86_32 (and possibly other
+ * architectures) and to 8-byte boundaries on 64-bit architetures. The new
+ * aligned_64 type enforces 8-byte alignment so that structs containing
+ * aligned_64 values have the same alignment on 32-bit and 64-bit architectures.
+ * No conversions are necessary between 32-bit user-space and a 64-bit kernel.
+ */
#define aligned_u64 __u64 __attribute__((aligned(8)))
#define aligned_be64 __be64 __attribute__((aligned(8)))
#define aligned_le64 __le64 __attribute__((aligned(8)))
typedef __u16 __bitwise __sum16;
typedef __u32 __bitwise __wsum;
+/* this is a special 64bit data type that is 8-byte aligned */
+#define __aligned_u64 __u64 __attribute__((aligned(8)))
+#define __aligned_be64 __be64 __attribute__((aligned(8)))
+#define __aligned_le64 __le64 __attribute__((aligned(8)))
+
#ifdef __KERNEL__
typedef unsigned __bitwise__ gfp_t;
typedef unsigned __bitwise__ fmode_t;
(wait)->private = current; \
(wait)->func = autoremove_wake_function; \
INIT_LIST_HEAD(&(wait)->task_list); \
+ (wait)->flags = 0; \
} while (0)
/**
/* for userland buffer */
int offset;
+ size_t size;
struct page **pages;
/* for kernel buffers */
* IPv6 Address Label subsystem (addrlabel.c)
*/
extern int ipv6_addr_label_init(void);
+extern void ipv6_addr_label_cleanup(void);
extern void ipv6_addr_label_rtnl_register(void);
extern u32 ipv6_addr_label(struct net *net,
const struct in6_addr *addr,
{
struct sk_buff *skb;
+ release_sock(sk);
if ((skb = sock_alloc_send_skb(sk, len + BT_SKB_RESERVE, nb, err))) {
skb_reserve(skb, BT_SKB_RESERVE);
bt_cb(skb)->incoming = 0;
}
+ lock_sock(sk);
+
+ if (!skb && *err)
+ return NULL;
+
+ *err = sock_error(sk);
+ if (*err)
+ goto out;
+
+ if (sk->sk_shutdown) {
+ *err = -ECONNRESET;
+ goto out;
+ }
return skb;
+
+out:
+ kfree_skb(skb);
+ return NULL;
}
int bt_err(__u16 code);
dev->stats.rx_packets++;
dev->stats.rx_bytes += skb->len;
skb->rxhash = 0;
+ skb_set_queue_mapping(skb, 0);
skb_dst_drop(skb);
nf_reset(skb);
}
fl.fl_ip_sport = sport;
fl.fl_ip_dport = dport;
fl.proto = protocol;
+ if (inet_sk(sk)->transparent)
+ fl.flags |= FLOWI_FLAG_ANYSRC;
ip_rt_put(*rp);
*rp = NULL;
security_sk_classify_flow(sk, &fl);
const struct xfrm_type *type_map[IPPROTO_MAX];
struct xfrm_mode *mode_map[XFRM_MODE_MAX];
int (*init_flags)(struct xfrm_state *x);
- void (*init_tempsel)(struct xfrm_state *x, struct flowi *fl,
- struct xfrm_tmpl *tmpl,
+ void (*init_tempsel)(struct xfrm_selector *sel, struct flowi *fl);
+ void (*init_temprop)(struct xfrm_state *x, struct xfrm_tmpl *tmpl,
xfrm_address_t *daddr, xfrm_address_t *saddr);
int (*tmpl_sort)(struct xfrm_tmpl **dst, struct xfrm_tmpl **src, int n);
int (*state_sort)(struct xfrm_state **dst, struct xfrm_state **src, int n);
{
struct semid_ds out;
+ memset(&out, 0, sizeof(out));
+
ipc64_perm_to_ipc_perm(&in->sem_perm, &out.sem_perm);
out.sem_otime = in->sem_otime;
if (IS_ERR(pol))
goto fail_nomem_policy;
vma_set_policy(tmp, pol);
+ tmp->vm_mm = mm;
if (anon_vma_fork(tmp, mpnt))
goto fail_nomem_anon_vma_fork;
tmp->vm_flags &= ~VM_LOCKED;
- tmp->vm_mm = mm;
tmp->vm_next = tmp->vm_prev = NULL;
file = tmp->vm_file;
if (file) {
remove_hrtimer(struct hrtimer *timer, struct hrtimer_clock_base *base)
{
if (hrtimer_is_queued(timer)) {
+ unsigned long state;
int reprogram;
/*
debug_deactivate(timer);
timer_stats_hrtimer_clear_start_info(timer);
reprogram = base->cpu_base == &__get_cpu_var(hrtimer_bases);
- __remove_hrtimer(timer, base, HRTIMER_STATE_INACTIVE,
- reprogram);
+ /*
+ * We must preserve the CALLBACK state flag here,
+ * otherwise we could move the timer base in
+ * switch_hrtimer_base.
+ */
+ state = timer->state & HRTIMER_STATE_CALLBACK;
+ __remove_hrtimer(timer, base, state, reprogram);
return 1;
}
return 0;
BUG_ON(timer->state != HRTIMER_STATE_CALLBACK);
enqueue_hrtimer(timer, base);
}
+
+ WARN_ON_ONCE(!(timer->state & HRTIMER_STATE_CALLBACK));
+
timer->state &= ~HRTIMER_STATE_CALLBACK;
}
perf_overflow_handler_t triggered,
struct task_struct *tsk)
{
- return perf_event_create_kernel_counter(attr, -1, tsk->pid, triggered);
+ return perf_event_create_kernel_counter(attr, -1, task_pid_vnr(tsk),
+ triggered);
}
EXPORT_SYMBOL_GPL(register_user_hw_breakpoint);
n = setup_sgl_buf(sgl, fifo->data + off, nents, l);
n += setup_sgl_buf(sgl + n, fifo->data, nents - n, len - l);
- if (n)
- sg_mark_end(sgl + n - 1);
return n;
}
{
struct module *mod = _mod;
list_del(&mod->list);
+ module_bug_cleanup(mod);
return 0;
}
if (err < 0)
goto ddebug;
+ module_bug_finalize(info.hdr, info.sechdrs, mod);
list_add_rcu(&mod->list, &modules);
mutex_unlock(&module_mutex);
mutex_lock(&module_mutex);
/* Unlink carefully: kallsyms could be walking list. */
list_del_rcu(&mod->list);
+ module_bug_cleanup(mod);
+
ddebug:
if (!mod->taints)
dynamic_debug_remove(info.debug);
static int perf_event_period(struct perf_event *event, u64 __user *arg)
{
struct perf_event_context *ctx = event->ctx;
- unsigned long size;
int ret = 0;
u64 value;
if (!event->attr.sample_period)
return -EINVAL;
- size = copy_from_user(&value, arg, sizeof(value));
- if (size != sizeof(value))
+ if (copy_from_user(&value, arg, sizeof(value)))
return -EFAULT;
if (!value)
rtime = nsecs_to_cputime(p->se.sum_exec_runtime);
if (total) {
- u64 temp;
+ u64 temp = rtime;
- temp = (u64)(rtime * utime);
+ temp *= utime;
do_div(temp, total);
utime = (cputime_t)temp;
} else
rtime = nsecs_to_cputime(cputime.sum_exec_runtime);
if (total) {
- u64 temp;
+ u64 temp = rtime;
- temp = (u64)(rtime * cputime.utime);
+ temp *= cputime.utime;
do_div(temp, total);
utime = (cputime_t)temp;
} else
if (time_before(now, nohz.next_balance))
return 0;
- if (!rq->nr_running)
+ if (rq->idle_at_tick)
return 0;
first_pick_cpu = atomic_read(&nohz.first_pick_cpu);
err |= __put_user(from->si_addr, &to->si_addr);
#ifdef __ARCH_SI_TRAPNO
err |= __put_user(from->si_trapno, &to->si_trapno);
+#endif
+#ifdef BUS_MCEERR_AO
+ /*
+ * Other callers might not initialize the si_lsb field,
+ * so check explicitely for the right codes here.
+ */
+ if (from->si_code == BUS_MCEERR_AR || from->si_code == BUS_MCEERR_AO)
+ err |= __put_user(from->si_addr_lsb, &to->si_addr_lsb);
#endif
break;
case __SI_CHLD:
EXPORT_SYMBOL_GPL(smp_call_function_any);
/**
- * __smp_call_function_single(): Run a function on another CPU
+ * __smp_call_function_single(): Run a function on a specific CPU
* @cpu: The CPU to run on.
* @data: Pre-allocated and setup data structure
+ * @wait: If true, wait until function has completed on specified CPU.
*
* Like smp_call_function_single(), but allow caller to pass in a
* pre-allocated data structure. Useful for embedding @data inside
void __smp_call_function_single(int cpu, struct call_single_data *data,
int wait)
{
- csd_lock(data);
+ unsigned int this_cpu;
+ unsigned long flags;
+ this_cpu = get_cpu();
/*
* Can deadlock when called with interrupts disabled.
* We allow cpu's that are not yet online though, as no one else can
WARN_ON_ONCE(cpu_online(smp_processor_id()) && wait && irqs_disabled()
&& !oops_in_progress);
- generic_exec_single(cpu, data, wait);
+ if (cpu == this_cpu) {
+ local_irq_save(flags);
+ data->func(data->info);
+ local_irq_restore(flags);
+ } else {
+ csd_lock(data);
+ generic_exec_single(cpu, data, wait);
+ }
+ put_cpu();
}
/**
kbuf[left] = 0;
}
- for (; left && vleft--; i++, min++, max++, first=0) {
+ for (; left && vleft--; i++, first = 0) {
unsigned long val;
if (write) {
if (!table->maxlen)
set_fail(&fail, table, "No maxlen");
}
- if ((table->proc_handler == proc_doulongvec_minmax) ||
- (table->proc_handler == proc_doulongvec_ms_jiffies_minmax)) {
- if (table->maxlen > sizeof (unsigned long)) {
- if (!table->extra1)
- set_fail(&fail, table, "No min");
- if (!table->extra2)
- set_fail(&fail, table, "No max");
- }
- }
#ifdef CONFIG_PROC_SYSCTL
if (table->procname && !table->proc_handler)
set_fail(&fail, table, "No proc_handler");
#define BUF_MAX_DATA_SIZE (BUF_PAGE_SIZE - (sizeof(u32) * 2))
/* Max number of timestamps that can fit on a page */
-#define RB_TIMESTAMPS_PER_PAGE (BUF_PAGE_SIZE / RB_LEN_TIME_STAMP)
+#define RB_TIMESTAMPS_PER_PAGE (BUF_PAGE_SIZE / RB_LEN_TIME_EXTEND)
int ring_buffer_print_page_header(struct trace_seq *s)
{
return NULL;
}
-int module_bug_finalize(const Elf_Ehdr *hdr, const Elf_Shdr *sechdrs,
- struct module *mod)
+void module_bug_finalize(const Elf_Ehdr *hdr, const Elf_Shdr *sechdrs,
+ struct module *mod)
{
char *secstrings;
unsigned int i;
* could potentially lead to deadlock and thus be counter-productive.
*/
list_add(&mod->bug_list, &module_bug_list);
-
- return 0;
}
void module_bug_cleanup(struct module *mod)
* element comparison is needed, so the client's cmp()
* routine can invoke cond_resched() periodically.
*/
- (*cmp)(priv, tail, tail);
+ (*cmp)(priv, tail->next, tail->next);
tail->next->prev = tail;
tail = tail->next;
struct backing_dev_info noop_backing_dev_info = {
.name = "noop",
+ .capabilities = BDI_CAP_NO_ACCT_AND_WRITEBACK,
};
EXPORT_SYMBOL_GPL(noop_backing_dev_info);
err = bdi_init(&default_backing_dev_info);
if (!err)
bdi_register(&default_backing_dev_info, NULL, "default");
+ err = bdi_init(&noop_backing_dev_info);
return err;
}
{
struct mm_struct *mm = current->mm;
struct address_space *mapping;
- unsigned long end = start + size;
struct vm_area_struct *vma;
int err = -EINVAL;
int has_write_lock = 0;
if (start + size <= start)
return err;
+ /* Does pgoff wrap? */
+ if (pgoff + (size >> PAGE_SHIFT) < pgoff)
+ return err;
+
/* Can we represent this offset inside this architecture's pte's? */
#if PTE_FILE_MAX_BITS < BITS_PER_LONG
if (pgoff + (size >> PAGE_SHIFT) >= (1UL << PTE_FILE_MAX_BITS))
if (!(vma->vm_flags & VM_CAN_NONLINEAR))
goto out;
- if (end <= start || start < vma->vm_start || end > vma->vm_end)
+ if (start < vma->vm_start || start + size > vma->vm_end)
goto out;
/* Must set VM_NONLINEAR before any pages are populated. */
* and just make the page writable */
avoidcopy = (page_mapcount(old_page) == 1);
if (avoidcopy) {
- if (!trylock_page(old_page)) {
- if (PageAnon(old_page))
- page_move_anon_rmap(old_page, vma, address);
- } else
- unlock_page(old_page);
+ if (PageAnon(old_page))
+ page_move_anon_rmap(old_page, vma, address);
set_huge_ptep_writable(vma, address, ptep);
return 0;
}
set_huge_pte_at(mm, address, ptep,
make_huge_pte(vma, new_page, 1));
page_remove_rmap(old_page);
- hugepage_add_anon_rmap(new_page, vma, address);
+ hugepage_add_new_anon_rmap(new_page, vma, address);
/* Make the old page be freed below */
new_page = old_page;
mmu_notifier_invalidate_range_end(mm,
vma, address);
}
- if (!pagecache_page) {
- page = pte_page(entry);
+ /*
+ * hugetlb_cow() requires page locks of pte_page(entry) and
+ * pagecache_page, so here we need take the former one
+ * when page != pagecache_page or !pagecache_page.
+ * Note that locking order is always pagecache_page -> page,
+ * so no worry about deadlock.
+ */
+ page = pte_page(entry);
+ if (page != pagecache_page)
lock_page(page);
- }
spin_lock(&mm->page_table_lock);
/* Check for a racing update before calling hugetlb_cow */
if (pagecache_page) {
unlock_page(pagecache_page);
put_page(pagecache_page);
- } else {
- unlock_page(page);
}
+ unlock_page(page);
out_mutex:
mutex_unlock(&hugetlb_instantiation_mutex);
if (!ptep)
goto out;
- if (pte_write(*ptep)) {
+ if (pte_write(*ptep) || pte_dirty(*ptep)) {
pte_t entry;
swapped = PageSwapCache(page);
set_pte_at(mm, addr, ptep, entry);
goto out_unlock;
}
- entry = pte_wrprotect(entry);
+ if (pte_dirty(entry))
+ set_page_dirty(page);
+ entry = pte_mkclean(pte_wrprotect(entry));
set_pte_at_notify(mm, addr, ptep, entry);
}
*orig_pte = *ptep;
static void mem_cgroup_threshold(struct mem_cgroup *memcg)
{
- __mem_cgroup_threshold(memcg, false);
- if (do_swap_account)
- __mem_cgroup_threshold(memcg, true);
+ while (memcg) {
+ __mem_cgroup_threshold(memcg, false);
+ if (do_swap_account)
+ __mem_cgroup_threshold(memcg, true);
+
+ memcg = parent_mem_cgroup(memcg);
+ }
}
static int compare_thresholds(const void *a, const void *b)
* signal.
*/
static int kill_proc_ao(struct task_struct *t, unsigned long addr, int trapno,
- unsigned long pfn)
+ unsigned long pfn, struct page *page)
{
struct siginfo si;
int ret;
#ifdef __ARCH_SI_TRAPNO
si.si_trapno = trapno;
#endif
- si.si_addr_lsb = PAGE_SHIFT;
+ si.si_addr_lsb = compound_order(compound_head(page)) + PAGE_SHIFT;
/*
* Don't use force here, it's convenient if the signal
* can be temporarily blocked.
int nr;
do {
nr = shrink_slab(1000, GFP_KERNEL, 1000);
- if (page_count(p) == 0)
+ if (page_count(p) == 1)
break;
} while (nr > 10);
}
* wrong earlier.
*/
static void kill_procs_ao(struct list_head *to_kill, int doit, int trapno,
- int fail, unsigned long pfn)
+ int fail, struct page *page, unsigned long pfn)
{
struct to_kill *tk, *next;
* process anyways.
*/
else if (kill_proc_ao(tk->tsk, tk->addr, trapno,
- pfn) < 0)
+ pfn, page) < 0)
printk(KERN_ERR
"MCE %#lx: Cannot send advisory machine check signal to %s:%d\n",
pfn, tk->tsk->comm, tk->tsk->pid);
* any accesses to the poisoned memory.
*/
kill_procs_ao(&tokill, !!PageDirty(hpage), trapno,
- ret != SWAP_SUCCESS, pfn);
+ ret != SWAP_SUCCESS, p, pfn);
return ret;
}
delayacct_clear_flag(DELAYACCT_PF_SWAPIN);
/*
- * Make sure try_to_free_swap didn't release the swapcache
- * from under us. The page pin isn't enough to prevent that.
+ * Make sure try_to_free_swap or reuse_swap_page or swapoff did not
+ * release the swapcache from under us. The page pin, and pte_same
+ * test below, are not enough to exclude that. Even if it is still
+ * swapcache, we need to check that the page's swap has not changed.
*/
- if (unlikely(!PageSwapCache(page)))
+ if (unlikely(!PageSwapCache(page) || page_private(page) != entry.val))
goto out_page;
if (ksm_might_need_to_copy(page, vma, address)) {
removed_exe_file_vma(mm);
fput(new->vm_file);
}
+ unlink_anon_vmas(new);
out_free_mpol:
mpol_put(pol);
out_free_vma:
}
/* return true if the task is not adequate as candidate victim task. */
-static bool oom_unkillable_task(struct task_struct *p, struct mem_cgroup *mem,
- const nodemask_t *nodemask)
+static bool oom_unkillable_task(struct task_struct *p,
+ const struct mem_cgroup *mem, const nodemask_t *nodemask)
{
if (is_global_init(p))
return true;
*/
points += p->signal->oom_score_adj;
- if (points < 0)
- return 0;
+ /*
+ * Never return 0 for an eligible task that may be killed since it's
+ * possible that no single user task uses more than 0.1% of memory and
+ * no single admin tasks uses more than 3.0%.
+ */
+ if (points <= 0)
+ return 1;
return (points < 1000) ? points : 1000;
}
/**
* dump_tasks - dump current memory state of all system tasks
* @mem: current's memory controller, if constrained
+ * @nodemask: nodemask passed to page allocator for mempolicy ooms
*
- * Dumps the current memory state of all system tasks, excluding kernel threads.
+ * Dumps the current memory state of all eligible tasks. Tasks not in the same
+ * memcg, not in the same cpuset, or bound to a disjoint set of mempolicy nodes
+ * are not shown.
* State information includes task's pid, uid, tgid, vm size, rss, cpu, oom_adj
* value, oom_score_adj value, and name.
*
- * If the actual is non-NULL, only tasks that are a member of the mem_cgroup are
- * shown.
- *
* Call with tasklist_lock read-locked.
*/
-static void dump_tasks(const struct mem_cgroup *mem)
+static void dump_tasks(const struct mem_cgroup *mem, const nodemask_t *nodemask)
{
struct task_struct *p;
struct task_struct *task;
pr_info("[ pid ] uid tgid total_vm rss cpu oom_adj oom_score_adj name\n");
for_each_process(p) {
- if (p->flags & PF_KTHREAD)
- continue;
- if (mem && !task_in_mem_cgroup(p, mem))
+ if (oom_unkillable_task(p, mem, nodemask))
continue;
task = find_lock_task_mm(p);
}
static void dump_header(struct task_struct *p, gfp_t gfp_mask, int order,
- struct mem_cgroup *mem)
+ struct mem_cgroup *mem, const nodemask_t *nodemask)
{
task_lock(current);
pr_warning("%s invoked oom-killer: gfp_mask=0x%x, order=%d, "
mem_cgroup_print_oom_info(mem, p);
show_mem();
if (sysctl_oom_dump_tasks)
- dump_tasks(mem);
+ dump_tasks(mem, nodemask);
}
#define K(x) ((x) << (PAGE_SHIFT-10))
unsigned int victim_points = 0;
if (printk_ratelimit())
- dump_header(p, gfp_mask, order, mem);
+ dump_header(p, gfp_mask, order, mem, nodemask);
/*
* If the task is already exiting, don't alarm the sysadmin or kill
* Determines whether the kernel must panic because of the panic_on_oom sysctl.
*/
static void check_panic_on_oom(enum oom_constraint constraint, gfp_t gfp_mask,
- int order)
+ int order, const nodemask_t *nodemask)
{
if (likely(!sysctl_panic_on_oom))
return;
return;
}
read_lock(&tasklist_lock);
- dump_header(NULL, gfp_mask, order, NULL);
+ dump_header(NULL, gfp_mask, order, NULL, nodemask);
read_unlock(&tasklist_lock);
panic("Out of memory: %s panic_on_oom is enabled\n",
sysctl_panic_on_oom == 2 ? "compulsory" : "system-wide");
unsigned int points = 0;
struct task_struct *p;
- check_panic_on_oom(CONSTRAINT_MEMCG, gfp_mask, 0);
+ check_panic_on_oom(CONSTRAINT_MEMCG, gfp_mask, 0, NULL);
limit = mem_cgroup_get_limit(mem) >> PAGE_SHIFT;
read_lock(&tasklist_lock);
retry:
void out_of_memory(struct zonelist *zonelist, gfp_t gfp_mask,
int order, nodemask_t *nodemask)
{
+ const nodemask_t *mpol_mask;
struct task_struct *p;
unsigned long totalpages;
unsigned long freed = 0;
*/
constraint = constrained_alloc(zonelist, gfp_mask, nodemask,
&totalpages);
- check_panic_on_oom(constraint, gfp_mask, order);
+ mpol_mask = (constraint == CONSTRAINT_MEMORY_POLICY) ? nodemask : NULL;
+ check_panic_on_oom(constraint, gfp_mask, order, mpol_mask);
read_lock(&tasklist_lock);
if (sysctl_oom_kill_allocating_task &&
}
retry:
- p = select_bad_process(&points, totalpages, NULL,
- constraint == CONSTRAINT_MEMORY_POLICY ? nodemask :
- NULL);
+ p = select_bad_process(&points, totalpages, NULL, mpol_mask);
if (PTR_ERR(p) == -1UL)
goto out;
/* Found nothing?!?! Either we hang forever, or we panic. */
if (!p) {
- dump_header(NULL, gfp_mask, order, NULL);
+ dump_header(NULL, gfp_mask, order, NULL, mpol_mask);
read_unlock(&tasklist_lock);
panic("Out of memory and no killable processes...\n");
}
if (!table)
panic("Failed to allocate %s hash table\n", tablename);
- printk(KERN_INFO "%s hash table entries: %d (order: %d, %lu bytes)\n",
+ printk(KERN_INFO "%s hash table entries: %ld (order: %d, %lu bytes)\n",
tablename,
- (1U << log2qty),
+ (1UL << log2qty),
ilog2(size) - PAGE_SHIFT,
size);
if (pcpu_first_unit_cpu == NR_CPUS)
pcpu_first_unit_cpu = cpu;
+ pcpu_last_unit_cpu = cpu;
}
}
- pcpu_last_unit_cpu = cpu;
pcpu_nr_units = unit;
for_each_possible_cpu(cpu)
unsigned long page_address_in_vma(struct page *page, struct vm_area_struct *vma)
{
if (PageAnon(page)) {
- if (vma->anon_vma->root != page_anon_vma(page)->root)
+ struct anon_vma *page__anon_vma = page_anon_vma(page);
+ /*
+ * Note: swapoff's unuse_vma() is more efficient with this
+ * check, and needs it to match anon_vma when KSM is active.
+ */
+ if (!vma->anon_vma || !page__anon_vma ||
+ vma->anon_vma->root != page__anon_vma->root)
return -EFAULT;
} else if (page->mapping && !(vma->vm_flags & VM_NONLINEAR)) {
if (!vma->vm_file ||
struct vm_area_struct *vma, unsigned long address, int exclusive)
{
struct anon_vma *anon_vma = vma->anon_vma;
+
BUG_ON(!anon_vma);
- if (!exclusive) {
- struct anon_vma_chain *avc;
- avc = list_entry(vma->anon_vma_chain.prev,
- struct anon_vma_chain, same_vma);
- anon_vma = avc->anon_vma;
- }
+
+ if (PageAnon(page))
+ return;
+ if (!exclusive)
+ anon_vma = anon_vma->root;
+
anon_vma = (void *) anon_vma + PAGE_MAPPING_ANON;
page->mapping = (struct address_space *) anon_vma;
page->index = linear_page_index(vma, address);
{
struct anon_vma *anon_vma = vma->anon_vma;
int first;
+
+ BUG_ON(!PageLocked(page));
BUG_ON(!anon_vma);
BUG_ON(address < vma->vm_start || address >= vma->vm_end);
first = atomic_inc_and_test(&page->_mapcount);
* If a zone is deemed to be full of pinned pages then just give it a light
* scan then give up on it.
*/
-static bool shrink_zones(int priority, struct zonelist *zonelist,
+static void shrink_zones(int priority, struct zonelist *zonelist,
struct scan_control *sc)
{
struct zoneref *z;
struct zone *zone;
- bool all_unreclaimable = true;
for_each_zone_zonelist_nodemask(zone, z, zonelist,
gfp_zone(sc->gfp_mask), sc->nodemask) {
}
shrink_zone(priority, zone, sc);
- all_unreclaimable = false;
}
+}
+
+static bool zone_reclaimable(struct zone *zone)
+{
+ return zone->pages_scanned < zone_reclaimable_pages(zone) * 6;
+}
+
+/*
+ * As hibernation is going on, kswapd is freezed so that it can't mark
+ * the zone into all_unreclaimable. It can't handle OOM during hibernation.
+ * So let's check zone's unreclaimable in direct reclaim as well as kswapd.
+ */
+static bool all_unreclaimable(struct zonelist *zonelist,
+ struct scan_control *sc)
+{
+ struct zoneref *z;
+ struct zone *zone;
+ bool all_unreclaimable = true;
+
+ for_each_zone_zonelist_nodemask(zone, z, zonelist,
+ gfp_zone(sc->gfp_mask), sc->nodemask) {
+ if (!populated_zone(zone))
+ continue;
+ if (!cpuset_zone_allowed_hardwall(zone, GFP_KERNEL))
+ continue;
+ if (zone_reclaimable(zone)) {
+ all_unreclaimable = false;
+ break;
+ }
+ }
+
return all_unreclaimable;
}
struct scan_control *sc)
{
int priority;
- bool all_unreclaimable;
unsigned long total_scanned = 0;
struct reclaim_state *reclaim_state = current->reclaim_state;
struct zoneref *z;
sc->nr_scanned = 0;
if (!priority)
disable_swap_token();
- all_unreclaimable = shrink_zones(priority, zonelist, sc);
+ shrink_zones(priority, zonelist, sc);
/*
* Don't shrink slabs when reclaiming memory from
* over limit cgroups
return sc->nr_reclaimed;
/* top priority shrink_zones still had more to do? don't OOM, then */
- if (scanning_global_lru(sc) && !all_unreclaimable)
+ if (scanning_global_lru(sc) && !all_unreclaimable(zonelist, sc))
return 1;
return 0;
total_scanned += sc.nr_scanned;
if (zone->all_unreclaimable)
continue;
- if (nr_slab == 0 &&
- zone->pages_scanned >= (zone_reclaimable_pages(zone) * 6))
+ if (nr_slab == 0 && !zone_reclaimable(zone))
zone->all_unreclaimable = 1;
/*
* If we've done a decent amount of scanning and
if (vlan_dev)
skb->dev = vlan_dev;
- else if (vlan_id)
- goto drop;
+ else if (vlan_id) {
+ if (!(skb->dev->flags & IFF_PROMISC))
+ goto drop;
+ skb->pkt_type = PACKET_OTHERHOST;
+ }
return (polling ? netif_receive_skb(skb) : netif_rx(skb));
if (vlan_dev)
skb->dev = vlan_dev;
- else if (vlan_id)
- goto drop;
+ else if (vlan_id) {
+ if (!(skb->dev->flags & IFF_PROMISC))
+ goto drop;
+ skb->pkt_type = PACKET_OTHERHOST;
+ }
for (p = napi->gro_list; p; p = p->next) {
NAPI_GRO_CB(p)->same_flow =
/* Allocate an fcall for the reply */
rpl_context = kmalloc(sizeof *rpl_context, GFP_KERNEL);
- if (!rpl_context)
+ if (!rpl_context) {
+ err = -ENOMEM;
goto err_close;
+ }
/*
* If the request has a buffer, steal it, otherwise
}
rpl_context->rc = req->rc;
if (!rpl_context->rc) {
- kfree(rpl_context);
- goto err_close;
+ err = -ENOMEM;
+ goto err_free2;
}
/*
*/
if (atomic_inc_return(&rdma->rq_count) <= rdma->rq_depth) {
err = post_recv(client, rpl_context);
- if (err) {
- kfree(rpl_context->rc);
- kfree(rpl_context);
- goto err_close;
- }
+ if (err)
+ goto err_free1;
} else
atomic_dec(&rdma->rq_count);
/* Post the request */
c = kmalloc(sizeof *c, GFP_KERNEL);
- if (!c)
- goto err_close;
+ if (!c) {
+ err = -ENOMEM;
+ goto err_free1;
+ }
c->req = req;
c->busa = ib_dma_map_single(rdma->cm_id->device,
return ib_post_send(rdma->qp, &wr, &bad_wr);
error:
+ kfree(c);
+ kfree(rpl_context->rc);
+ kfree(rpl_context);
P9_DPRINTK(P9_DEBUG_ERROR, "EIO\n");
return -EIO;
-
+ err_free1:
+ kfree(rpl_context->rc);
+ err_free2:
+ kfree(rpl_context);
err_close:
spin_lock_irqsave(&rdma->req_lock, flags);
if (rdma->state < P9_RDMA_CLOSING) {
mutex_lock(&virtio_9p_lock);
list_for_each_entry(chan, &virtio_chan_list, chan_list) {
- if (!strncmp(devname, chan->tag, chan->tag_len)) {
+ if (!strncmp(devname, chan->tag, chan->tag_len) &&
+ strlen(devname) == chan->tag_len) {
if (!chan->inuse) {
chan->inuse = true;
found = 1;
unregister_netdev(net_dev);
free_netdev(net_dev);
}
- read_lock_irq(&devs_lock);
- if (list_empty(&br2684_devs)) {
- /* last br2684 device */
- unregister_atmdevice_notifier(&atm_dev_notifier);
- }
- read_unlock_irq(&devs_lock);
return;
}
if (list_empty(&br2684_devs)) {
/* 1st br2684 device */
- register_atmdevice_notifier(&atm_dev_notifier);
brdev->number = 1;
} else
brdev->number = BRPRIV(list_entry_brdev(br2684_devs.prev))->number + 1;
return -ENOMEM;
#endif
register_atm_ioctl(&br2684_ioctl_ops);
+ register_atmdevice_notifier(&atm_dev_notifier);
return 0;
}
#endif
- /* if not already empty */
- if (!list_empty(&br2684_devs))
- unregister_atmdevice_notifier(&atm_dev_notifier);
+ unregister_atmdevice_notifier(&atm_dev_notifier);
while (!list_empty(&br2684_devs)) {
net_dev = list_entry_brdev(br2684_devs.next);
eg->packets_rcvd++;
mpc->eg_ops->put(eg);
- memset(ATM_SKB(skb), 0, sizeof(struct atm_skb_data));
+ memset(ATM_SKB(new_skb), 0, sizeof(struct atm_skb_data));
netif_rx(new_skb);
}
static void l2cap_streaming_send(struct sock *sk)
{
- struct sk_buff *skb, *tx_skb;
+ struct sk_buff *skb;
struct l2cap_pinfo *pi = l2cap_pi(sk);
u16 control, fcs;
- while ((skb = sk->sk_send_head)) {
- tx_skb = skb_clone(skb, GFP_ATOMIC);
-
- control = get_unaligned_le16(tx_skb->data + L2CAP_HDR_SIZE);
+ while ((skb = skb_dequeue(TX_QUEUE(sk)))) {
+ control = get_unaligned_le16(skb->data + L2CAP_HDR_SIZE);
control |= pi->next_tx_seq << L2CAP_CTRL_TXSEQ_SHIFT;
- put_unaligned_le16(control, tx_skb->data + L2CAP_HDR_SIZE);
+ put_unaligned_le16(control, skb->data + L2CAP_HDR_SIZE);
if (pi->fcs == L2CAP_FCS_CRC16) {
- fcs = crc16(0, (u8 *)tx_skb->data, tx_skb->len - 2);
- put_unaligned_le16(fcs, tx_skb->data + tx_skb->len - 2);
+ fcs = crc16(0, (u8 *)skb->data, skb->len - 2);
+ put_unaligned_le16(fcs, skb->data + skb->len - 2);
}
- l2cap_do_send(sk, tx_skb);
+ l2cap_do_send(sk, skb);
pi->next_tx_seq = (pi->next_tx_seq + 1) % 64;
-
- if (skb_queue_is_last(TX_QUEUE(sk), skb))
- sk->sk_send_head = NULL;
- else
- sk->sk_send_head = skb_queue_next(TX_QUEUE(sk), skb);
-
- skb = skb_dequeue(TX_QUEUE(sk));
- kfree_skb(skb);
}
}
switch (optname) {
case L2CAP_OPTIONS:
+ if (sk->sk_state == BT_CONNECTED) {
+ err = -EINVAL;
+ break;
+ }
+
opts.imtu = l2cap_pi(sk)->imtu;
opts.omtu = l2cap_pi(sk)->omtu;
opts.flush_to = l2cap_pi(sk)->flush_to;
case L2CAP_CONF_MTU:
if (val < L2CAP_DEFAULT_MIN_MTU) {
*result = L2CAP_CONF_UNACCEPT;
- pi->omtu = L2CAP_DEFAULT_MIN_MTU;
+ pi->imtu = L2CAP_DEFAULT_MIN_MTU;
} else
- pi->omtu = val;
- l2cap_add_conf_opt(&ptr, L2CAP_CONF_MTU, 2, pi->omtu);
+ pi->imtu = val;
+ l2cap_add_conf_opt(&ptr, L2CAP_CONF_MTU, 2, pi->imtu);
break;
case L2CAP_CONF_FLUSH_TO:
return 0;
}
+static inline void set_default_fcs(struct l2cap_pinfo *pi)
+{
+ /* FCS is enabled only in ERTM or streaming mode, if one or both
+ * sides request it.
+ */
+ if (pi->mode != L2CAP_MODE_ERTM && pi->mode != L2CAP_MODE_STREAMING)
+ pi->fcs = L2CAP_FCS_NONE;
+ else if (!(pi->conf_state & L2CAP_CONF_NO_FCS_RECV))
+ pi->fcs = L2CAP_FCS_CRC16;
+}
+
static inline int l2cap_config_req(struct l2cap_conn *conn, struct l2cap_cmd_hdr *cmd, u16 cmd_len, u8 *data)
{
struct l2cap_conf_req *req = (struct l2cap_conf_req *) data;
if (!sk)
return -ENOENT;
- if (sk->sk_state != BT_CONFIG) {
- struct l2cap_cmd_rej rej;
-
- rej.reason = cpu_to_le16(0x0002);
- l2cap_send_cmd(conn, cmd->ident, L2CAP_COMMAND_REJ,
- sizeof(rej), &rej);
+ if (sk->sk_state == BT_DISCONN)
goto unlock;
- }
/* Reject if config buffer is too small. */
len = cmd_len - sizeof(*req);
goto unlock;
if (l2cap_pi(sk)->conf_state & L2CAP_CONF_INPUT_DONE) {
- if (!(l2cap_pi(sk)->conf_state & L2CAP_CONF_NO_FCS_RECV) ||
- l2cap_pi(sk)->fcs != L2CAP_FCS_NONE)
- l2cap_pi(sk)->fcs = L2CAP_FCS_CRC16;
+ set_default_fcs(l2cap_pi(sk));
sk->sk_state = BT_CONNECTED;
l2cap_pi(sk)->conf_state |= L2CAP_CONF_INPUT_DONE;
if (l2cap_pi(sk)->conf_state & L2CAP_CONF_OUTPUT_DONE) {
- if (!(l2cap_pi(sk)->conf_state & L2CAP_CONF_NO_FCS_RECV) ||
- l2cap_pi(sk)->fcs != L2CAP_FCS_NONE)
- l2cap_pi(sk)->fcs = L2CAP_FCS_CRC16;
+ set_default_fcs(l2cap_pi(sk));
sk->sk_state = BT_CONNECTED;
l2cap_pi(sk)->next_tx_seq = 0;
static void rfcomm_sk_state_change(struct rfcomm_dlc *d, int err)
{
struct sock *sk = d->owner, *parent;
+ unsigned long flags;
+
if (!sk)
return;
BT_DBG("dlc %p state %ld err %d", d, d->state, err);
+ local_irq_save(flags);
bh_lock_sock(sk);
if (err)
}
bh_unlock_sock(sk);
+ local_irq_restore(flags);
if (parent && sock_flag(sk, SOCK_ZAPPED)) {
/* We have to drop DLC lock here, otherwise
long timeo;
int err;
int ifindex, headroom, tailroom;
+ unsigned int mtu;
struct net_device *dev;
lock_sock(sk);
cf_sk->sk.sk_state = CAIF_DISCONNECTED;
goto out;
}
- dev = dev_get_by_index(sock_net(sk), ifindex);
+
+ err = -ENODEV;
+ rcu_read_lock();
+ dev = dev_get_by_index_rcu(sock_net(sk), ifindex);
+ if (!dev) {
+ rcu_read_unlock();
+ goto out;
+ }
cf_sk->headroom = LL_RESERVED_SPACE_EXTRA(dev, headroom);
+ mtu = dev->mtu;
+ rcu_read_unlock();
+
cf_sk->tailroom = tailroom;
- cf_sk->maxframe = dev->mtu - (headroom + tailroom);
- dev_put(dev);
+ cf_sk->maxframe = mtu - (headroom + tailroom);
if (cf_sk->maxframe < 1) {
- pr_warning("CAIF: %s(): CAIF Interface MTU too small (%d)\n",
- __func__, dev->mtu);
- err = -ENODEV;
+ pr_warning("CAIF: %s(): CAIF Interface MTU too small (%u)\n",
+ __func__, mtu);
goto out;
}
if (info.cmd == ETHTOOL_GRXCLSRLALL) {
if (info.rule_cnt > 0) {
if (info.rule_cnt <= KMALLOC_MAX_SIZE / sizeof(u32))
- rule_buf = kmalloc(info.rule_cnt * sizeof(u32),
+ rule_buf = kzalloc(info.rule_cnt * sizeof(u32),
GFP_USER);
if (!rule_buf)
return -ENOMEM;
(KMALLOC_MAX_SIZE - sizeof(*indir)) / sizeof(*indir->ring_index))
return -ENOMEM;
full_size = sizeof(*indir) + sizeof(*indir->ring_index) * table_size;
- indir = kmalloc(full_size, GFP_USER);
+ indir = kzalloc(full_size, GFP_USER);
if (!indir)
return -ENOMEM;
gstrings.len = ret;
- data = kmalloc(gstrings.len * ETH_GSTRING_LEN, GFP_USER);
+ data = kzalloc(gstrings.len * ETH_GSTRING_LEN, GFP_USER);
if (!data)
return -ENOMEM;
if (regs.len > reglen)
regs.len = reglen;
- regbuf = kmalloc(reglen, GFP_USER);
+ regbuf = kzalloc(reglen, GFP_USER);
if (!regbuf)
return -ENOMEM;
* in any case.
*/
-int verify_iovec(struct msghdr *m, struct iovec *iov, struct sockaddr *address, int mode)
+long verify_iovec(struct msghdr *m, struct iovec *iov, struct sockaddr *address, int mode)
{
- int size, err, ct;
+ int size, ct;
+ long err;
if (m->msg_namelen) {
if (mode == VERIFY_READ) {
{
int uid;
- read_lock(&sk->sk_callback_lock);
+ read_lock_bh(&sk->sk_callback_lock);
uid = sk->sk_socket ? SOCK_INODE(sk->sk_socket)->i_uid : 0;
- read_unlock(&sk->sk_callback_lock);
+ read_unlock_bh(&sk->sk_callback_lock);
return uid;
}
EXPORT_SYMBOL(sock_i_uid);
{
unsigned long ino;
- read_lock(&sk->sk_callback_lock);
+ read_lock_bh(&sk->sk_callback_lock);
ino = sk->sk_socket ? SOCK_INODE(sk->sk_socket)->i_ino : 0;
- read_unlock(&sk->sk_callback_lock);
+ read_unlock_bh(&sk->sk_callback_lock);
return ino;
}
EXPORT_SYMBOL(sock_i_ino);
set_bit(SOCK_NOSPACE, &sk->sk_socket->flags);
sk->sk_write_pending++;
- sk_wait_event(sk, ¤t_timeo, !sk->sk_err &&
- !(sk->sk_shutdown & SEND_SHUTDOWN) &&
- sk_stream_memory_free(sk) &&
- vm_wait);
+ sk_wait_event(sk, ¤t_timeo, sk->sk_err ||
+ (sk->sk_shutdown & SEND_SHUTDOWN) ||
+ (sk_stream_memory_free(sk) &&
+ !vm_wait));
sk->sk_write_pending--;
if (vm_wait) {
config NET_IPGRE
tristate "IP: GRE tunnels over IP"
+ depends on IPV6 || IPV6=n
help
Tunneling means encapsulating data of one protocol type within
another protocol and sending it over a channel that understands the
If unsure, say Y.
config INET_LRO
- bool "Large Receive Offload (ipv4/tcp)"
+ tristate "Large Receive Offload (ipv4/tcp)"
default y
---help---
Support for Large Receive Offload (ipv4/tcp).
int mark = 0;
- if (len == 8 || IGMP_V2_SEEN(in_dev)) {
+ if (len == 8) {
if (ih->code == 0) {
/* Alas, old v1 router presents here. */
igmpv3_clear_delrec(in_dev);
} else if (len < 12) {
return; /* ignore bogus packet; freed by caller */
+ } else if (IGMP_V1_SEEN(in_dev)) {
+ /* This is a v3 query with v1 queriers present */
+ max_delay = IGMP_Query_Response_Interval;
+ group = 0;
+ } else if (IGMP_V2_SEEN(in_dev)) {
+ /* this is a v3 query with v2 queriers present;
+ * Interpretation of the max_delay code is problematic here.
+ * A real v2 host would use ih_code directly, while v3 has a
+ * different encoding. We use the v3 encoding as more likely
+ * to be intended in a v3 query.
+ */
+ max_delay = IGMPV3_MRC(ih3->code)*(HZ/IGMP_TIMER_SCALE);
} else { /* v3 */
if (!pskb_may_pull(skb, sizeof(struct igmpv3_query)))
return;
#include <net/netns/generic.h>
#include <net/rtnetlink.h>
-#ifdef CONFIG_IPV6
+#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
#include <net/ipv6.h>
#include <net/ip6_fib.h>
#include <net/ip6_route.h>
if ((dst = rt->rt_gateway) == 0)
goto tx_error_icmp;
}
-#ifdef CONFIG_IPV6
+#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
else if (skb->protocol == htons(ETH_P_IPV6)) {
struct in6_addr *addr6;
int addr_type;
goto tx_error;
}
}
-#ifdef CONFIG_IPV6
+#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
else if (skb->protocol == htons(ETH_P_IPV6)) {
struct rt6_info *rt6 = (struct rt6_info *)skb_dst(skb);
if ((iph->ttl = tiph->ttl) == 0) {
if (skb->protocol == htons(ETH_P_IP))
iph->ttl = old_iph->ttl;
-#ifdef CONFIG_IPV6
+#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
else if (skb->protocol == htons(ETH_P_IPV6))
iph->ttl = ((struct ipv6hdr *)old_iph)->hop_limit;
#endif
* we can switch to copy when see the first bad fragment.
*/
if (skb_has_frags(skb)) {
- struct sk_buff *frag;
+ struct sk_buff *frag, *frag2;
int first_len = skb_pagelen(skb);
- int truesizes = 0;
if (first_len - hlen > mtu ||
((first_len - hlen) & 7) ||
if (frag->len > mtu ||
((frag->len & 7) && frag->next) ||
skb_headroom(frag) < hlen)
- goto slow_path;
+ goto slow_path_clean;
/* Partially cloned skb? */
if (skb_shared(frag))
- goto slow_path;
+ goto slow_path_clean;
BUG_ON(frag->sk);
if (skb->sk) {
frag->sk = skb->sk;
frag->destructor = sock_wfree;
}
- truesizes += frag->truesize;
+ skb->truesize -= frag->truesize;
}
/* Everything is OK. Generate! */
frag = skb_shinfo(skb)->frag_list;
skb_frag_list_init(skb);
skb->data_len = first_len - skb_headlen(skb);
- skb->truesize -= truesizes;
skb->len = first_len;
iph->tot_len = htons(first_len);
iph->frag_off = htons(IP_MF);
}
IP_INC_STATS(dev_net(dev), IPSTATS_MIB_FRAGFAILS);
return err;
+
+slow_path_clean:
+ skb_walk_frags(skb, frag2) {
+ if (frag2 == frag)
+ break;
+ frag2->sk = NULL;
+ frag2->destructor = NULL;
+ skb->truesize += frag2->truesize;
+ }
}
slow_path:
/* ip_route_me_harder expects skb->dst to be set */
skb_dst_set_noref(nskb, skb_dst(oldskb));
+ nskb->protocol = htons(ETH_P_IP);
if (ip_route_me_harder(nskb, addr_type))
goto free_nskb;
const struct net_device *out,
int (*okfn)(struct sk_buff *))
{
+ struct sock *sk = skb->sk;
struct inet_sock *inet = inet_sk(skb->sk);
- if (inet && inet->nodefrag)
+ if (sk && (sk->sk_family == PF_INET) &&
+ inet->nodefrag)
return NF_ACCEPT;
#if defined(CONFIG_NF_CONNTRACK) || defined(CONFIG_NF_CONNTRACK_MODULE)
unsigned char s[4];
if (offset & 1) {
- s[0] = s[2] = 0;
+ s[0] = ~0;
s[1] = ~*optr;
+ s[2] = 0;
s[3] = *nptr;
} else {
- s[1] = s[3] = 0;
s[0] = ~*optr;
+ s[1] = ~0;
s[2] = *nptr;
+ s[3] = 0;
}
*csum = csum_fold(csum_partial(s, 4, ~csum_unfold(*csum)));
}
if (net_ratelimit())
- printk(KERN_WARNING "Neighbour table overflow.\n");
+ printk(KERN_WARNING "ipv4: Neighbour table overflow.\n");
rt_drop(rt);
return -ENOBUFS;
}
*/
mask = 0;
- if (sk->sk_err)
- mask = POLLERR;
/*
* POLLHUP is certainly not done right. But poll() doesn't
if (tp->urg_data & TCP_URG_VALID)
mask |= POLLPRI;
}
+ /* This barrier is coupled with smp_wmb() in tcp_reset() */
+ smp_rmb();
+ if (sk->sk_err)
+ mask |= POLLERR;
+
return mask;
}
EXPORT_SYMBOL(tcp_poll);
sg = sk->sk_route_caps & NETIF_F_SG;
while (--iovlen >= 0) {
- int seglen = iov->iov_len;
+ size_t seglen = iov->iov_len;
unsigned char __user *from = iov->iov_base;
iov++;
cnt += tcp_skb_pcount(skb);
if (cnt > packets) {
- if (tcp_is_sack(tp) || (oldcnt >= packets))
+ if ((tcp_is_sack(tp) && !tcp_is_fack(tp)) ||
+ (oldcnt >= packets))
break;
mss = skb_shinfo(skb)->gso_size;
default:
sk->sk_err = ECONNRESET;
}
+ /* This barrier is coupled with smp_rmb() in tcp_poll() */
+ smp_wmb();
if (!sock_flag(sk, SOCK_DEAD))
sk->sk_error_report(sk);
/* This function calculates a "timeout" which is equivalent to the timeout of a
* TCP connection after "boundary" unsuccessful, exponentially backed-off
- * retransmissions with an initial RTO of TCP_RTO_MIN.
+ * retransmissions with an initial RTO of TCP_RTO_MIN or TCP_TIMEOUT_INIT if
+ * syn_set flag is set.
*/
static bool retransmits_timed_out(struct sock *sk,
- unsigned int boundary)
+ unsigned int boundary,
+ bool syn_set)
{
unsigned int timeout, linear_backoff_thresh;
unsigned int start_ts;
+ unsigned int rto_base = syn_set ? TCP_TIMEOUT_INIT : TCP_RTO_MIN;
if (!inet_csk(sk)->icsk_retransmits)
return false;
else
start_ts = tcp_sk(sk)->retrans_stamp;
- linear_backoff_thresh = ilog2(TCP_RTO_MAX/TCP_RTO_MIN);
+ linear_backoff_thresh = ilog2(TCP_RTO_MAX/rto_base);
if (boundary <= linear_backoff_thresh)
- timeout = ((2 << boundary) - 1) * TCP_RTO_MIN;
+ timeout = ((2 << boundary) - 1) * rto_base;
else
- timeout = ((2 << linear_backoff_thresh) - 1) * TCP_RTO_MIN +
+ timeout = ((2 << linear_backoff_thresh) - 1) * rto_base +
(boundary - linear_backoff_thresh) * TCP_RTO_MAX;
return (tcp_time_stamp - start_ts) >= timeout;
{
struct inet_connection_sock *icsk = inet_csk(sk);
int retry_until;
- bool do_reset;
+ bool do_reset, syn_set = 0;
if ((1 << sk->sk_state) & (TCPF_SYN_SENT | TCPF_SYN_RECV)) {
if (icsk->icsk_retransmits)
dst_negative_advice(sk);
retry_until = icsk->icsk_syn_retries ? : sysctl_tcp_syn_retries;
+ syn_set = 1;
} else {
- if (retransmits_timed_out(sk, sysctl_tcp_retries1)) {
+ if (retransmits_timed_out(sk, sysctl_tcp_retries1, 0)) {
/* Black hole detection */
tcp_mtu_probing(icsk, sk);
retry_until = tcp_orphan_retries(sk, alive);
do_reset = alive ||
- !retransmits_timed_out(sk, retry_until);
+ !retransmits_timed_out(sk, retry_until, 0);
if (tcp_out_of_resources(sk, do_reset))
return 1;
}
}
- if (retransmits_timed_out(sk, retry_until)) {
+ if (retransmits_timed_out(sk, retry_until, syn_set)) {
/* Has it gone just too far? */
tcp_write_err(sk);
return 1;
icsk->icsk_rto = min(icsk->icsk_rto << 1, TCP_RTO_MAX);
}
inet_csk_reset_xmit_timer(sk, ICSK_TIME_RETRANS, icsk->icsk_rto, TCP_RTO_MAX);
- if (retransmits_timed_out(sk, sysctl_tcp_retries1 + 1))
+ if (retransmits_timed_out(sk, sysctl_tcp_retries1 + 1, 0))
__sk_dst_reset(sk);
out:;
static int xfrm4_get_tos(struct flowi *fl)
{
- return fl->fl4_tos;
+ return IPTOS_RT_MASK & fl->fl4_tos; /* Strip ECN bits */
}
static int xfrm4_init_path(struct xfrm_dst *path, struct dst_entry *dst,
}
static void
-__xfrm4_init_tempsel(struct xfrm_state *x, struct flowi *fl,
- struct xfrm_tmpl *tmpl,
- xfrm_address_t *daddr, xfrm_address_t *saddr)
+__xfrm4_init_tempsel(struct xfrm_selector *sel, struct flowi *fl)
+{
+ sel->daddr.a4 = fl->fl4_dst;
+ sel->saddr.a4 = fl->fl4_src;
+ sel->dport = xfrm_flowi_dport(fl);
+ sel->dport_mask = htons(0xffff);
+ sel->sport = xfrm_flowi_sport(fl);
+ sel->sport_mask = htons(0xffff);
+ sel->family = AF_INET;
+ sel->prefixlen_d = 32;
+ sel->prefixlen_s = 32;
+ sel->proto = fl->proto;
+ sel->ifindex = fl->oif;
+}
+
+static void
+xfrm4_init_temprop(struct xfrm_state *x, struct xfrm_tmpl *tmpl,
+ xfrm_address_t *daddr, xfrm_address_t *saddr)
{
- x->sel.daddr.a4 = fl->fl4_dst;
- x->sel.saddr.a4 = fl->fl4_src;
- x->sel.dport = xfrm_flowi_dport(fl);
- x->sel.dport_mask = htons(0xffff);
- x->sel.sport = xfrm_flowi_sport(fl);
- x->sel.sport_mask = htons(0xffff);
- x->sel.family = AF_INET;
- x->sel.prefixlen_d = 32;
- x->sel.prefixlen_s = 32;
- x->sel.proto = fl->proto;
- x->sel.ifindex = fl->oif;
x->id = tmpl->id;
if (x->id.daddr.a4 == 0)
x->id.daddr.a4 = daddr->a4;
.owner = THIS_MODULE,
.init_flags = xfrm4_init_flags,
.init_tempsel = __xfrm4_init_tempsel,
+ .init_temprop = xfrm4_init_temprop,
.output = xfrm4_output,
.extract_input = xfrm4_extract_input,
.extract_output = xfrm4_extract_output,
if (err < 0) {
printk(KERN_CRIT "IPv6 Addrconf:"
" cannot initialize default policy table: %d.\n", err);
- return err;
+ goto out;
}
- register_pernet_subsys(&addrconf_ops);
+ err = register_pernet_subsys(&addrconf_ops);
+ if (err < 0)
+ goto out_addrlabel;
/* The addrconf netdev notifier requires that loopback_dev
* has it's ipv6 private information allocated and setup
unregister_netdevice_notifier(&ipv6_dev_notf);
errlo:
unregister_pernet_subsys(&addrconf_ops);
-
+out_addrlabel:
+ ipv6_addr_label_cleanup();
+out:
return err;
}
unregister_netdevice_notifier(&ipv6_dev_notf);
unregister_pernet_subsys(&addrconf_ops);
+ ipv6_addr_label_cleanup();
rtnl_lock();
return register_pernet_subsys(&ipv6_addr_label_ops);
}
+void ipv6_addr_label_cleanup(void)
+{
+ unregister_pernet_subsys(&ipv6_addr_label_ops);
+}
+
static const struct nla_policy ifal_policy[IFAL_MAX+1] = {
[IFAL_ADDRESS] = { .len = sizeof(struct in6_addr), },
[IFAL_LABEL] = { .len = sizeof(u32), },
if (skb_has_frags(skb)) {
int first_len = skb_pagelen(skb);
- int truesizes = 0;
+ struct sk_buff *frag2;
if (first_len - hlen > mtu ||
((first_len - hlen) & 7) ||
if (frag->len > mtu ||
((frag->len & 7) && frag->next) ||
skb_headroom(frag) < hlen)
- goto slow_path;
+ goto slow_path_clean;
/* Partially cloned skb? */
if (skb_shared(frag))
- goto slow_path;
+ goto slow_path_clean;
BUG_ON(frag->sk);
if (skb->sk) {
frag->sk = skb->sk;
frag->destructor = sock_wfree;
- truesizes += frag->truesize;
}
+ skb->truesize -= frag->truesize;
}
err = 0;
first_len = skb_pagelen(skb);
skb->data_len = first_len - skb_headlen(skb);
- skb->truesize -= truesizes;
skb->len = first_len;
ipv6_hdr(skb)->payload_len = htons(first_len -
sizeof(struct ipv6hdr));
IPSTATS_MIB_FRAGFAILS);
dst_release(&rt->dst);
return err;
+
+slow_path_clean:
+ skb_walk_frags(skb, frag2) {
+ if (frag2 == frag)
+ break;
+ frag2->sk = NULL;
+ frag2->destructor = NULL;
+ skb->truesize += frag2->truesize;
+ }
}
slow_path:
if (net_ratelimit())
printk(KERN_WARNING
- "Neighbour table overflow.\n");
+ "ipv6: Neighbour table overflow.\n");
dst_free(&rt->dst);
return NULL;
}
* i.e. Path MTU discovery
*/
-void rt6_pmtu_discovery(struct in6_addr *daddr, struct in6_addr *saddr,
- struct net_device *dev, u32 pmtu)
+static void rt6_do_pmtu_disc(struct in6_addr *daddr, struct in6_addr *saddr,
+ struct net *net, u32 pmtu, int ifindex)
{
struct rt6_info *rt, *nrt;
- struct net *net = dev_net(dev);
int allfrag = 0;
- rt = rt6_lookup(net, daddr, saddr, dev->ifindex, 0);
+ rt = rt6_lookup(net, daddr, saddr, ifindex, 0);
if (rt == NULL)
return;
dst_release(&rt->dst);
}
+void rt6_pmtu_discovery(struct in6_addr *daddr, struct in6_addr *saddr,
+ struct net_device *dev, u32 pmtu)
+{
+ struct net *net = dev_net(dev);
+
+ /*
+ * RFC 1981 states that a node "MUST reduce the size of the packets it
+ * is sending along the path" that caused the Packet Too Big message.
+ * Since it's not possible in the general case to determine which
+ * interface was used to send the original packet, we update the MTU
+ * on the interface that will be used to send future packets. We also
+ * update the MTU on the interface that received the Packet Too Big in
+ * case the original packet was forced out that interface with
+ * SO_BINDTODEVICE or similar. This is the next best thing to the
+ * correct behaviour, which would be to update the MTU on all
+ * interfaces.
+ */
+ rt6_do_pmtu_disc(daddr, saddr, net, pmtu, 0);
+ rt6_do_pmtu_disc(daddr, saddr, net, pmtu, dev->ifindex);
+}
+
/*
* Misc support functions
*/
#include <net/addrconf.h>
static void
-__xfrm6_init_tempsel(struct xfrm_state *x, struct flowi *fl,
- struct xfrm_tmpl *tmpl,
- xfrm_address_t *daddr, xfrm_address_t *saddr)
+__xfrm6_init_tempsel(struct xfrm_selector *sel, struct flowi *fl)
{
/* Initialize temporary selector matching only
* to current session. */
- ipv6_addr_copy((struct in6_addr *)&x->sel.daddr, &fl->fl6_dst);
- ipv6_addr_copy((struct in6_addr *)&x->sel.saddr, &fl->fl6_src);
- x->sel.dport = xfrm_flowi_dport(fl);
- x->sel.dport_mask = htons(0xffff);
- x->sel.sport = xfrm_flowi_sport(fl);
- x->sel.sport_mask = htons(0xffff);
- x->sel.family = AF_INET6;
- x->sel.prefixlen_d = 128;
- x->sel.prefixlen_s = 128;
- x->sel.proto = fl->proto;
- x->sel.ifindex = fl->oif;
+ ipv6_addr_copy((struct in6_addr *)&sel->daddr, &fl->fl6_dst);
+ ipv6_addr_copy((struct in6_addr *)&sel->saddr, &fl->fl6_src);
+ sel->dport = xfrm_flowi_dport(fl);
+ sel->dport_mask = htons(0xffff);
+ sel->sport = xfrm_flowi_sport(fl);
+ sel->sport_mask = htons(0xffff);
+ sel->family = AF_INET6;
+ sel->prefixlen_d = 128;
+ sel->prefixlen_s = 128;
+ sel->proto = fl->proto;
+ sel->ifindex = fl->oif;
+}
+
+static void
+xfrm6_init_temprop(struct xfrm_state *x, struct xfrm_tmpl *tmpl,
+ xfrm_address_t *daddr, xfrm_address_t *saddr)
+{
x->id = tmpl->id;
if (ipv6_addr_any((struct in6_addr*)&x->id.daddr))
memcpy(&x->id.daddr, daddr, sizeof(x->sel.daddr));
.eth_proto = htons(ETH_P_IPV6),
.owner = THIS_MODULE,
.init_tempsel = __xfrm6_init_tempsel,
+ .init_temprop = xfrm6_init_temprop,
.tmpl_sort = __xfrm6_tmpl_sort,
.state_sort = __xfrm6_state_sort,
.output = xfrm6_output,
set_bit(HT_AGG_STATE_STOPPING, &tid_tx->state);
+ del_timer_sync(&tid_tx->addba_resp_timer);
+
/*
* After this packets are no longer handed right through
* to the driver but are put onto tid_tx->pending instead,
struct net_device *prev_dev = NULL;
struct ieee80211_rx_status *status = IEEE80211_SKB_RXCB(skb);
- if (status->flag & RX_FLAG_INTERNAL_CMTR)
- goto out_free_skb;
-
if (skb_headroom(skb) < sizeof(*rthdr) &&
pskb_expand_head(skb, sizeof(*rthdr), 0, GFP_ATOMIC))
goto out_free_skb;
} else
goto out_free_skb;
- status->flag |= RX_FLAG_INTERNAL_CMTR;
return;
out_free_skb:
skb2 = skb_clone(skb, GFP_ATOMIC);
if (skb2) {
skb2->dev = prev_dev;
- netif_receive_skb(skb2);
+ netif_rx(skb2);
}
}
}
if (prev_dev) {
skb->dev = prev_dev;
- netif_receive_skb(skb);
+ netif_rx(skb);
skb = NULL;
}
rcu_read_unlock();
{
unsigned int off, len;
struct nf_ct_ext_type *t;
+ size_t alloc_size;
rcu_read_lock();
t = rcu_dereference(nf_ct_ext_types[id]);
BUG_ON(t == NULL);
off = ALIGN(sizeof(struct nf_ct_ext), t->align);
len = off + t->len;
+ alloc_size = t->alloc_size;
rcu_read_unlock();
- *ext = kzalloc(t->alloc_size, gfp);
+ *ext = kzalloc(alloc_size, gfp);
if (!*ext)
return NULL;
unsigned int msglen, origlen;
const char *dptr, *end;
s16 diff, tdiff = 0;
- int ret;
+ int ret = NF_ACCEPT;
typeof(nf_nat_sip_seq_adjust_hook) nf_nat_sip_seq_adjust;
if (ctinfo != IP_CT_ESTABLISHED &&
int
nf_tproxy_assign_sock(struct sk_buff *skb, struct sock *sk)
{
- if (inet_sk(sk)->transparent) {
+ bool transparent = (sk->sk_state == TCP_TIME_WAIT) ?
+ inet_twsk(sk)->tw_transparent :
+ inet_sk(sk)->transparent;
+
+ if (transparent) {
skb_orphan(skb);
skb->sk = sk;
skb->destructor = nf_tproxy_destructor;
static int pipe_rcv_status(struct sock *sk, struct sk_buff *skb)
{
struct pep_sock *pn = pep_sk(sk);
- struct pnpipehdr *hdr = pnp_hdr(skb);
+ struct pnpipehdr *hdr;
int wake = 0;
if (!pskb_may_pull(skb, sizeof(*hdr) + 4))
return -EINVAL;
+ hdr = pnp_hdr(skb);
if (hdr->data[0] != PN_PEP_TYPE_COMMON) {
LIMIT_NETDEBUG(KERN_DEBUG"Phonet unknown PEP type: %u\n",
(unsigned)hdr->data[0]);
unsigned long ret;
void *addr;
- if (to_user)
+ addr = kmap(page);
+ if (to_user) {
rds_stats_add(s_copy_to_user, bytes);
- else
+ ret = copy_to_user(ptr, addr + offset, bytes);
+ } else {
rds_stats_add(s_copy_from_user, bytes);
-
- addr = kmap_atomic(page, KM_USER0);
- if (to_user)
- ret = __copy_to_user_inatomic(ptr, addr + offset, bytes);
- else
- ret = __copy_from_user_inatomic(addr + offset, ptr, bytes);
- kunmap_atomic(addr, KM_USER0);
-
- if (ret) {
- addr = kmap(page);
- if (to_user)
- ret = copy_to_user(ptr, addr + offset, bytes);
- else
- ret = copy_from_user(addr + offset, ptr, bytes);
- kunmap(page);
- if (ret)
- return -EFAULT;
+ ret = copy_from_user(addr + offset, ptr, bytes);
}
+ kunmap(page);
- return 0;
+ return ret ? -EFAULT : 0;
}
EXPORT_SYMBOL_GPL(rds_page_copy_user);
struct rds_connection *conn;
struct rds_tcp_connection *tc;
- read_lock(&sk->sk_callback_lock);
+ read_lock_bh(&sk->sk_callback_lock);
conn = sk->sk_user_data;
if (conn == NULL) {
state_change = sk->sk_state_change;
break;
}
out:
- read_unlock(&sk->sk_callback_lock);
+ read_unlock_bh(&sk->sk_callback_lock);
state_change(sk);
}
rdsdebug("listen data ready sk %p\n", sk);
- read_lock(&sk->sk_callback_lock);
+ read_lock_bh(&sk->sk_callback_lock);
ready = sk->sk_user_data;
if (ready == NULL) { /* check for teardown race */
ready = sk->sk_data_ready;
queue_work(rds_wq, &rds_tcp_listen_work);
out:
- read_unlock(&sk->sk_callback_lock);
+ read_unlock_bh(&sk->sk_callback_lock);
ready(sk, bytes);
}
rdsdebug("data ready sk %p bytes %d\n", sk, bytes);
- read_lock(&sk->sk_callback_lock);
+ read_lock_bh(&sk->sk_callback_lock);
conn = sk->sk_user_data;
if (conn == NULL) { /* check for teardown race */
ready = sk->sk_data_ready;
if (rds_tcp_read_sock(conn, GFP_ATOMIC, KM_SOFTIRQ0) == -ENOMEM)
queue_delayed_work(rds_wq, &conn->c_recv_w, 0);
out:
- read_unlock(&sk->sk_callback_lock);
+ read_unlock_bh(&sk->sk_callback_lock);
ready(sk, bytes);
}
struct rds_connection *conn;
struct rds_tcp_connection *tc;
- read_lock(&sk->sk_callback_lock);
+ read_lock_bh(&sk->sk_callback_lock);
conn = sk->sk_user_data;
if (conn == NULL) {
write_space = sk->sk_write_space;
queue_delayed_work(rds_wq, &conn->c_send_w, 0);
out:
- read_unlock(&sk->sk_callback_lock);
+ read_unlock_bh(&sk->sk_callback_lock);
/*
* write_space is only called when data leaves tcp's send queue if
if (addr_len == sizeof(struct sockaddr_rose) && addr->srose_ndigis > 1)
return -EINVAL;
- if (addr->srose_ndigis > ROSE_MAX_DIGIS)
+ if ((unsigned int) addr->srose_ndigis > ROSE_MAX_DIGIS)
return -EINVAL;
if ((dev = rose_dev_get(&addr->srose_addr)) == NULL) {
if (addr_len == sizeof(struct sockaddr_rose) && addr->srose_ndigis > 1)
return -EINVAL;
- if (addr->srose_ndigis > ROSE_MAX_DIGIS)
+ if ((unsigned int) addr->srose_ndigis > ROSE_MAX_DIGIS)
return -EINVAL;
/* Source + Destination digis should not exceed ROSE_MAX_DIGIS */
int toff = off + key->off + (off2 & key->offmask);
__be32 *data, _data;
- if (skb_headroom(skb) + toff < 0)
+ if (skb_headroom(skb) + toff > INT_MAX)
goto out;
data = skb_header_pointer(skb, toff, 4, &_data);
id = ntohs(hmacs->hmac_ids[i]);
/* Check the id is in the supported range */
- if (id > SCTP_AUTH_HMAC_ID_MAX)
+ if (id > SCTP_AUTH_HMAC_ID_MAX) {
+ id = 0;
continue;
+ }
/* See is we support the id. Supported IDs have name and
* length fields set, so that we can allocated and use
* them. We can safely just check for name, for without the
* name, we can't allocate the TFM.
*/
- if (!sctp_hmac_list[id].hmac_name)
+ if (!sctp_hmac_list[id].hmac_name) {
+ id = 0;
continue;
+ }
break;
}
/* Walk through the addrs buffer and count the number of addresses. */
addr_buf = kaddrs;
while (walk_size < addrs_size) {
+ if (walk_size + sizeof(sa_family_t) > addrs_size) {
+ kfree(kaddrs);
+ return -EINVAL;
+ }
+
sa_addr = (struct sockaddr *)addr_buf;
af = sctp_get_af_specific(sa_addr->sa_family);
/* Walk through the addrs buffer and count the number of addresses. */
addr_buf = kaddrs;
while (walk_size < addrs_size) {
+ if (walk_size + sizeof(sa_family_t) > addrs_size) {
+ err = -EINVAL;
+ goto out_free;
+ }
+
sa_addr = (union sctp_addr *)addr_buf;
af = sctp_get_af_specific(sa_addr->sa.sa_family);
- port = ntohs(sa_addr->v4.sin_port);
/* If the address family is not supported or if this address
* causes the address buffer to overflow return EINVAL.
goto out_free;
}
+ port = ntohs(sa_addr->v4.sin_port);
+
/* Save current address so we can work with it */
memcpy(&to, sa_addr, af->sockaddr_len);
u32 _xid;
__be32 *xp;
- read_lock(&sk->sk_callback_lock);
+ read_lock_bh(&sk->sk_callback_lock);
dprintk("RPC: xs_udp_data_ready...\n");
if (!(xprt = xprt_from_sock(sk)))
goto out;
dropit:
skb_free_datagram(sk, skb);
out:
- read_unlock(&sk->sk_callback_lock);
+ read_unlock_bh(&sk->sk_callback_lock);
}
static inline void xs_tcp_read_fraghdr(struct rpc_xprt *xprt, struct xdr_skb_reader *desc)
dprintk("RPC: xs_tcp_data_ready...\n");
- read_lock(&sk->sk_callback_lock);
+ read_lock_bh(&sk->sk_callback_lock);
if (!(xprt = xprt_from_sock(sk)))
goto out;
if (xprt->shutdown)
read = tcp_read_sock(sk, &rd_desc, xs_tcp_data_recv);
} while (read > 0);
out:
- read_unlock(&sk->sk_callback_lock);
+ read_unlock_bh(&sk->sk_callback_lock);
}
/*
{
struct rpc_xprt *xprt;
- read_lock(&sk->sk_callback_lock);
+ read_lock_bh(&sk->sk_callback_lock);
if (!(xprt = xprt_from_sock(sk)))
goto out;
dprintk("RPC: xs_tcp_state_change client %p...\n", xprt);
switch (sk->sk_state) {
case TCP_ESTABLISHED:
- spin_lock_bh(&xprt->transport_lock);
+ spin_lock(&xprt->transport_lock);
if (!xprt_test_and_set_connected(xprt)) {
struct sock_xprt *transport = container_of(xprt,
struct sock_xprt, xprt);
xprt_wake_pending_tasks(xprt, -EAGAIN);
}
- spin_unlock_bh(&xprt->transport_lock);
+ spin_unlock(&xprt->transport_lock);
break;
case TCP_FIN_WAIT1:
/* The client initiated a shutdown of the socket */
xs_sock_mark_closed(xprt);
}
out:
- read_unlock(&sk->sk_callback_lock);
+ read_unlock_bh(&sk->sk_callback_lock);
}
/**
{
struct rpc_xprt *xprt;
- read_lock(&sk->sk_callback_lock);
+ read_lock_bh(&sk->sk_callback_lock);
if (!(xprt = xprt_from_sock(sk)))
goto out;
dprintk("RPC: %s client %p...\n"
__func__, xprt, sk->sk_err);
xprt_wake_pending_tasks(xprt, -EAGAIN);
out:
- read_unlock(&sk->sk_callback_lock);
+ read_unlock_bh(&sk->sk_callback_lock);
}
static void xs_write_space(struct sock *sk)
*/
static void xs_udp_write_space(struct sock *sk)
{
- read_lock(&sk->sk_callback_lock);
+ read_lock_bh(&sk->sk_callback_lock);
/* from net/core/sock.c:sock_def_write_space */
if (sock_writeable(sk))
xs_write_space(sk);
- read_unlock(&sk->sk_callback_lock);
+ read_unlock_bh(&sk->sk_callback_lock);
}
/**
*/
static void xs_tcp_write_space(struct sock *sk)
{
- read_lock(&sk->sk_callback_lock);
+ read_lock_bh(&sk->sk_callback_lock);
/* from net/core/stream.c:sk_stream_write_space */
if (sk_stream_wspace(sk) >= sk_stream_min_wspace(sk))
xs_write_space(sk);
- read_unlock(&sk->sk_callback_lock);
+ read_unlock_bh(&sk->sk_callback_lock);
}
static void xs_udp_do_set_buffer_size(struct rpc_xprt *xprt)
} else if (!iwp->pointer)
return -EFAULT;
- extra = kmalloc(extra_size, GFP_KERNEL);
+ extra = kzalloc(extra_size, GFP_KERNEL);
if (!extra)
return -ENOMEM;
tmpl->mode == XFRM_MODE_BEET) {
remote = &tmpl->id.daddr;
local = &tmpl->saddr;
- family = tmpl->encap_family;
- if (xfrm_addr_any(local, family)) {
- error = xfrm_get_saddr(net, &tmp, remote, family);
+ if (xfrm_addr_any(local, tmpl->encap_family)) {
+ error = xfrm_get_saddr(net, &tmp, remote, tmpl->encap_family);
if (error)
goto fail;
local = &tmp;
EXPORT_SYMBOL(xfrm_sad_getinfo);
static int
-xfrm_init_tempsel(struct xfrm_state *x, struct flowi *fl,
- struct xfrm_tmpl *tmpl,
- xfrm_address_t *daddr, xfrm_address_t *saddr,
- unsigned short family)
+xfrm_init_tempstate(struct xfrm_state *x, struct flowi *fl,
+ struct xfrm_tmpl *tmpl,
+ xfrm_address_t *daddr, xfrm_address_t *saddr,
+ unsigned short family)
{
struct xfrm_state_afinfo *afinfo = xfrm_state_get_afinfo(family);
if (!afinfo)
return -1;
- afinfo->init_tempsel(x, fl, tmpl, daddr, saddr);
+ afinfo->init_tempsel(&x->sel, fl);
+
+ if (family != tmpl->encap_family) {
+ xfrm_state_put_afinfo(afinfo);
+ afinfo = xfrm_state_get_afinfo(tmpl->encap_family);
+ if (!afinfo)
+ return -1;
+ }
+ afinfo->init_temprop(x, tmpl, daddr, saddr);
xfrm_state_put_afinfo(afinfo);
return 0;
}
int error = 0;
struct xfrm_state *best = NULL;
u32 mark = pol->mark.v & pol->mark.m;
+ unsigned short encap_family = tmpl->encap_family;
to_put = NULL;
spin_lock_bh(&xfrm_state_lock);
- h = xfrm_dst_hash(net, daddr, saddr, tmpl->reqid, family);
+ h = xfrm_dst_hash(net, daddr, saddr, tmpl->reqid, encap_family);
hlist_for_each_entry(x, entry, net->xfrm.state_bydst+h, bydst) {
- if (x->props.family == family &&
+ if (x->props.family == encap_family &&
x->props.reqid == tmpl->reqid &&
(mark & x->mark.m) == x->mark.v &&
!(x->props.flags & XFRM_STATE_WILDRECV) &&
- xfrm_state_addr_check(x, daddr, saddr, family) &&
+ xfrm_state_addr_check(x, daddr, saddr, encap_family) &&
tmpl->mode == x->props.mode &&
tmpl->id.proto == x->id.proto &&
(tmpl->id.spi == x->id.spi || !tmpl->id.spi))
- xfrm_state_look_at(pol, x, fl, family, daddr, saddr,
+ xfrm_state_look_at(pol, x, fl, encap_family, daddr, saddr,
&best, &acquire_in_progress, &error);
}
if (best)
goto found;
- h_wildcard = xfrm_dst_hash(net, daddr, &saddr_wildcard, tmpl->reqid, family);
+ h_wildcard = xfrm_dst_hash(net, daddr, &saddr_wildcard, tmpl->reqid, encap_family);
hlist_for_each_entry(x, entry, net->xfrm.state_bydst+h_wildcard, bydst) {
- if (x->props.family == family &&
+ if (x->props.family == encap_family &&
x->props.reqid == tmpl->reqid &&
(mark & x->mark.m) == x->mark.v &&
!(x->props.flags & XFRM_STATE_WILDRECV) &&
- xfrm_state_addr_check(x, daddr, saddr, family) &&
+ xfrm_state_addr_check(x, daddr, saddr, encap_family) &&
tmpl->mode == x->props.mode &&
tmpl->id.proto == x->id.proto &&
(tmpl->id.spi == x->id.spi || !tmpl->id.spi))
- xfrm_state_look_at(pol, x, fl, family, daddr, saddr,
+ xfrm_state_look_at(pol, x, fl, encap_family, daddr, saddr,
&best, &acquire_in_progress, &error);
}
if (!x && !error && !acquire_in_progress) {
if (tmpl->id.spi &&
(x0 = __xfrm_state_lookup(net, mark, daddr, tmpl->id.spi,
- tmpl->id.proto, family)) != NULL) {
+ tmpl->id.proto, encap_family)) != NULL) {
to_put = x0;
error = -EEXIST;
goto out;
error = -ENOMEM;
goto out;
}
- /* Initialize temporary selector matching only
+ /* Initialize temporary state matching only
* to current session. */
- xfrm_init_tempsel(x, fl, tmpl, daddr, saddr, family);
+ xfrm_init_tempstate(x, fl, tmpl, daddr, saddr, family);
memcpy(&x->mark, &pol->mark, sizeof(x->mark));
error = security_xfrm_state_alloc_acquire(x, pol->security, fl->secid);
x->km.state = XFRM_STATE_ACQ;
list_add(&x->km.all, &net->xfrm.state_all);
hlist_add_head(&x->bydst, net->xfrm.state_bydst+h);
- h = xfrm_src_hash(net, daddr, saddr, family);
+ h = xfrm_src_hash(net, daddr, saddr, encap_family);
hlist_add_head(&x->bysrc, net->xfrm.state_bysrc+h);
if (x->id.spi) {
- h = xfrm_spi_hash(net, &x->id.daddr, x->id.spi, x->id.proto, family);
+ h = xfrm_spi_hash(net, &x->id.daddr, x->id.spi, x->id.proto, encap_family);
hlist_add_head(&x->byspi, net->xfrm.state_byspi+h);
}
x->lft.hard_add_expires_seconds = net->xfrm.sysctl_acq_expires;
{
int i;
unsigned int ret;
+ unsigned int nents;
struct scatterlist sg[10];
printk(KERN_INFO "DMA fifo test start\n");
* byte at the beginning, after the kfifo_skip().
*/
sg_init_table(sg, ARRAY_SIZE(sg));
- ret = kfifo_dma_in_prepare(&fifo, sg, ARRAY_SIZE(sg), FIFO_SIZE);
- printk(KERN_INFO "DMA sgl entries: %d\n", ret);
- if (!ret) {
+ nents = kfifo_dma_in_prepare(&fifo, sg, ARRAY_SIZE(sg), FIFO_SIZE);
+ printk(KERN_INFO "DMA sgl entries: %d\n", nents);
+ if (!nents) {
/* fifo is full and no sgl was created */
printk(KERN_WARNING "error kfifo_dma_in_prepare\n");
return -EIO;
/* receive data */
printk(KERN_INFO "scatterlist for receive:\n");
- for (i = 0; i < ARRAY_SIZE(sg); i++) {
+ for (i = 0; i < nents; i++) {
printk(KERN_INFO
"sg[%d] -> "
"page_link 0x%.8lx offset 0x%.8x length 0x%.8x\n",
kfifo_dma_in_finish(&fifo, ret);
/* Prepare to transmit data, example: 8 bytes */
- ret = kfifo_dma_out_prepare(&fifo, sg, ARRAY_SIZE(sg), 8);
- printk(KERN_INFO "DMA sgl entries: %d\n", ret);
- if (!ret) {
+ nents = kfifo_dma_out_prepare(&fifo, sg, ARRAY_SIZE(sg), 8);
+ printk(KERN_INFO "DMA sgl entries: %d\n", nents);
+ if (!nents) {
/* no data was available and no sgl was created */
printk(KERN_WARNING "error kfifo_dma_out_prepare\n");
return -EIO;
}
printk(KERN_INFO "scatterlist for transmit:\n");
- for (i = 0; i < ARRAY_SIZE(sg); i++) {
+ for (i = 0; i < nents; i++) {
printk(KERN_INFO
"sg[%d] -> "
"page_link 0x%.8lx offset 0x%.8x length 0x%.8x\n",
if (sym->name && !sym_is_choice_value(sym)) {
printf("CONFIG_%s\n", sym->name);
}
- } else {
+ } else if (input_mode != oldnoconfig) {
if (!conf_cnt++)
printf(_("*\n* Restart config...\n*\n"));
rootEntry = menu_get_parent_menu(menu);
struct symbol *sym;
struct property *prompt;
struct expr *dep;
- struct expr *dir_dep;
unsigned int flags;
char *help;
struct file *file;
void menu_add_dep(struct expr *dep)
{
current_entry->dep = expr_alloc_and(current_entry->dep, menu_check_dep(dep));
- current_entry->dir_dep = current_entry->dep;
}
void menu_set_type(int type)
for (menu = parent->list; menu; menu = menu->next)
menu_finalize(menu);
} else if (sym) {
- /* ignore inherited dependencies for dir_dep */
- sym->dir_dep.expr = expr_transform(expr_copy(parent->dir_dep));
- sym->dir_dep.expr = expr_eliminate_dups(sym->dir_dep.expr);
-
basedep = parent->prompt ? parent->prompt->visible.expr : NULL;
basedep = expr_trans_compare(basedep, E_UNEQUAL, &symbol_no);
basedep = expr_eliminate_dups(expr_transform(basedep));
parent->next = last_menu->next;
last_menu->next = NULL;
}
+
+ sym->dir_dep.expr = parent->dep;
}
for (menu = parent->list; menu; menu = menu->next) {
if (sym && sym_is_choice(sym) &&
}
}
calc_newval:
+#if 0
if (sym->dir_dep.tri == no && sym->rev_dep.tri != no) {
fprintf(stderr, "warning: (");
expr_fprint(sym->rev_dep.expr, stderr);
expr_fprint(sym->dir_dep.expr, stderr);
fprintf(stderr, ")\n");
}
+#endif
newval.tri = EXPR_OR(newval.tri, sym->rev_dep.tri);
}
if (newval.tri == mod && sym_get_type(sym) == S_BOOLEAN)
const pid_t gpid = task_pid_nr(current);
static const int tomoyo_buffer_len = 4096;
char *buffer = kmalloc(tomoyo_buffer_len, GFP_NOFS);
+ pid_t ppid;
if (!buffer)
return NULL;
do_gettimeofday(&tv);
+ rcu_read_lock();
+ ppid = task_tgid_vnr(current->real_parent);
+ rcu_read_unlock();
snprintf(buffer, tomoyo_buffer_len - 1,
"#timestamp=%lu profile=%u mode=%s (global-pid=%u)"
" task={ pid=%u ppid=%u uid=%u gid=%u euid=%u"
" egid=%u suid=%u sgid=%u fsuid=%u fsgid=%u }",
tv.tv_sec, r->profile, tomoyo_mode[r->mode], gpid,
- (pid_t) sys_getpid(), (pid_t) sys_getppid(),
+ task_tgid_vnr(current), ppid,
current_uid(), current_gid(), current_euid(),
current_egid(), current_suid(), current_sgid(),
current_fsuid(), current_fsgid());
/********** Function prototypes. **********/
-extern asmlinkage long sys_getpid(void);
-extern asmlinkage long sys_getppid(void);
-
/* Check whether the given string starts with the given keyword. */
bool tomoyo_str_starts(char **src, const char *find);
/* Get tomoyo_realpath() of current process. */
/* max number of user-defined controls */
#define MAX_USER_CONTROLS 32
+#define MAX_CONTROL_COUNT 1028
struct snd_kctl_ioctl {
struct list_head list; /* list of all ioctls */
if (snd_BUG_ON(!control || !control->count))
return NULL;
+
+ if (control->count > MAX_CONTROL_COUNT)
+ return NULL;
+
kctl = kzalloc(sizeof(*kctl) + sizeof(struct snd_kcontrol_volatile) * control->count, GFP_KERNEL);
if (kctl == NULL) {
snd_printk(KERN_ERR "Cannot allocate control instance\n");
{
struct snd_rawmidi_file *rfile;
struct snd_rawmidi *rmidi;
+ struct module *module;
rfile = file->private_data;
rmidi = rfile->rmidi;
rawmidi_release_priv(rfile);
kfree(rfile);
+ module = rmidi->card->module;
snd_card_file_remove(rmidi->card, file);
- module_put(rmidi->card->module);
+ module_put(module);
return 0;
}
return 0;
}
#else /* !CONFIG_PROC_FS */
-static int proc_init(struct snd_akm4xxx *ak) {}
+static int proc_init(struct snd_akm4xxx *ak) { return 0; }
#endif
int snd_akm4xxx_build_controls(struct snd_akm4xxx *ak)
case SND_DEV_DSP:
case SND_DEV_DSP16:
case SND_DEV_AUDIO:
- return audio_ioctl(dev, file, cmd, p);
+ ret = audio_ioctl(dev, file, cmd, p);
break;
case SND_DEV_MIDIN:
- return MIDIbuf_ioctl(dev, file, cmd, p);
+ ret = MIDIbuf_ioctl(dev, file, cmd, p);
break;
}
/* Lenovo Thinkpad T61/X61 */
SND_PCI_QUIRK_VENDOR(0x17aa, "Lenovo Thinkpad", AD1984_THINKPAD),
SND_PCI_QUIRK(0x1028, 0x0214, "Dell T3400", AD1984_DELL_DESKTOP),
+ SND_PCI_QUIRK(0x1028, 0x0233, "Dell Latitude E6400", AD1984_DELL_DESKTOP),
{}
};
}
if (spec->autocfg.dig_in_pin) {
- hda_nid_t dig_nid;
- err = snd_hda_get_connections(codec,
- spec->autocfg.dig_in_pin,
- &dig_nid, 1);
- if (err > 0)
- spec->dig_in_nid = dig_nid;
+ dig_nid = codec->start_nid;
+ for (i = 0; i < codec->num_nodes; i++, dig_nid++) {
+ unsigned int wcaps = get_wcaps(codec, dig_nid);
+ if (get_wcaps_type(wcaps) != AC_WID_AUD_IN)
+ continue;
+ if (!(wcaps & AC_WCAP_DIGITAL))
+ continue;
+ if (!(wcaps & AC_WCAP_CONN_LIST))
+ continue;
+ err = get_connection_index(codec, dig_nid,
+ spec->autocfg.dig_in_pin);
+ if (err >= 0) {
+ spec->dig_in_nid = dig_nid;
+ break;
+ }
+ }
}
}
"HP dv6", STAC_HP_DV5),
SND_PCI_QUIRK(PCI_VENDOR_ID_HP, 0x3061,
"HP dv6", STAC_HP_DV5), /* HP dv6-1110ax */
+ SND_PCI_QUIRK(PCI_VENDOR_ID_HP, 0x363e,
+ "HP DV6", STAC_HP_DV5),
SND_PCI_QUIRK_MASK(PCI_VENDOR_ID_HP, 0xfff0, 0x7010,
"HP", STAC_HP_DV5),
SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x0233,
chip->model.suspend = claro_suspend;
chip->model.resume = claro_resume;
chip->model.set_adc_params = set_ak5385_params;
+ chip->model.device_config = PLAYBACK_0_TO_I2S |
+ PLAYBACK_1_TO_SPDIF |
+ CAPTURE_0_FROM_I2S_2 |
+ CAPTURE_1_FROM_SPDIF;
break;
}
if (id->driver_data == MODEL_MERIDIAN ||
if (err < 0)
return err;
+ memset(&info, 0, sizeof(info));
spin_lock_irqsave(&hdsp->lock, flags);
info.pref_sync_ref = (unsigned char)hdsp_pref_sync_ref(hdsp);
info.wordclock_sync_check = (unsigned char)hdsp_wc_sync_check(hdsp);
case SNDRV_HDSPM_IOCTL_GET_CONFIG_INFO:
+ memset(&info, 0, sizeof(info));
spin_lock_irq(&hdspm->lock);
info.pref_sync_ref = hdspm_pref_sync_ref(hdspm);
info.wordclock_sync_check = hdspm_wc_sync_check(hdspm);
#include <linux/firmware.h>
#include <linux/module.h>
+#include <asm/clkdev.h>
#include <asm/clock.h>
#include <cpu/sh7722.h>
};
static struct clk siumckb_clk = {
- .name = "siumckb_clk",
- .id = -1,
.ops = &siumckb_clk_ops,
.rate = 0, /* initialised at run-time */
};
+static struct clk_lookup *siumckb_lookup;
+
static int migor_hw_params(struct snd_pcm_substream *substream,
struct snd_pcm_hw_params *params)
{
if (ret < 0)
return ret;
+ siumckb_lookup = clkdev_alloc(&siumckb_clk, "siumckb_clk", NULL);
+ if (!siumckb_lookup) {
+ ret = -ENOMEM;
+ goto eclkdevalloc;
+ }
+ clkdev_add(siumckb_lookup);
+
/* Port number used on this machine: port B */
migor_snd_device = platform_device_alloc("soc-audio", 1);
if (!migor_snd_device) {
epdevadd:
platform_device_put(migor_snd_device);
epdevalloc:
+ clkdev_drop(siumckb_lookup);
+eclkdevalloc:
clk_unregister(&siumckb_clk);
return ret;
}
static void __exit migor_exit(void)
{
+ clkdev_drop(siumckb_lookup);
clk_unregister(&siumckb_clk);
platform_device_unregister(migor_snd_device);
}
data[1] = (value >> 8) & 0xff;
data[2] = value & 0xff;
- if (!snd_soc_codec_volatile_register(codec, reg))
- reg_cache[reg] = value;
+ if (!snd_soc_codec_volatile_register(codec, reg)
+ && reg < codec->reg_cache_size)
+ reg_cache[reg] = value;
if (codec->cache_only) {
codec->cache_sync = 1;
# we compile into subdirectories. if the target directory is not the source directory, they might not exists. So
# we depend the various files onto their directories.
DIRECTORY_DEPS = $(LIB_OBJS) $(BUILTIN_OBJS) $(OUTPUT)PERF-VERSION-FILE $(OUTPUT)common-cmds.h
-$(DIRECTORY_DEPS): $(sort $(dir $(DIRECTORY_DEPS)))
+$(DIRECTORY_DEPS): | $(sort $(dir $(DIRECTORY_DEPS)))
# In the second step, we make a rule to actually create these directories
$(sort $(dir $(DIRECTORY_DEPS))):
$(QUIET_MKDIR)$(MKDIR) -p $@ 2>/dev/null
#define cpu_relax() asm volatile("":::"memory")
#endif
+#ifdef __mips__
+#include "../../arch/mips/include/asm/unistd.h"
+#define rmb() asm volatile( \
+ ".set mips2\n\t" \
+ "sync\n\t" \
+ ".set mips0" \
+ : /* no output */ \
+ : /* no input */ \
+ : "memory")
+#define cpu_relax() asm volatile("" ::: "memory")
+#endif
+
#include <time.h>
#include <unistd.h>
#include <sys/types.h>
register_python_scripting(&python_scripting_unsupported_ops);
}
#else
-struct scripting_ops python_scripting_ops;
+extern struct scripting_ops python_scripting_ops;
void setup_python_scripting(void)
{
register_perl_scripting(&perl_scripting_unsupported_ops);
}
#else
-struct scripting_ops perl_scripting_ops;
+extern struct scripting_ops perl_scripting_ops;
void setup_perl_scripting(void)
{
switch (key) {
case 'a':
- if (browser->selection->map == NULL &&
+ if (browser->selection->map == NULL ||
browser->selection->map->dso->annotate_warned)
continue;
goto do_annotate;
events = file->f_op->poll(file, &irqfd->pt);
list_add_tail(&irqfd->list, &kvm->irqfds.items);
- spin_unlock_irq(&kvm->irqfds.lock);
/*
* Check if there was an event already pending on the eventfd
if (events & POLLIN)
schedule_work(&irqfd->inject);
+ spin_unlock_irq(&kvm->irqfds.lock);
+
/*
* do not drop the file until the irqfd is fully initialized, otherwise
* we might race against the POLLHUP
asmlinkage void kvm_handle_fault_on_reboot(void)
{
- if (kvm_rebooting)
+ if (kvm_rebooting) {
/* spin while reset goes on */
+ local_irq_enable();
while (true)
;
+ }
/* Fault while not rebooting. We want the trace. */
BUG();
}
git://bbs.cooldavid.org / net-next-2.6.git / commitdiff