--- /dev/null
+ S3C2410 DMA
+ ===========
+
+Introduction
+------------
+
+ The kernel provides an interface to manage DMA transfers
+ using the DMA channels in the cpu, so that the central
+ duty of managing channel mappings, and programming the
+ channel generators is in one place.
+
+
+DMA Channel Ordering
+--------------------
+
+ Many of the range do not have connections for the DMA
+ channels to all sources, which means that some devices
+ have a restricted number of channels that can be used.
+
+ To allow flexibilty for each cpu type and board, the
+ dma code can be given an dma ordering structure which
+ allows the order of channel search to be specified, as
+ well as allowing the prohibition of certain claims.
+
+ struct s3c24xx_dma_order has a list of channels, and
+ each channel within has a slot for a list of dma
+ channel numbers. The slots are searched in order, for
+ the presence of a dma channel number with DMA_CH_VALID
+ orred in.
+
+ If the order has the flag DMA_CH_NEVER set, then after
+ checking the channel list, the system will return no
+ found channel, thus denying the request.
+
+ A board support file can call s3c24xx_dma_order_set()
+ to register an complete ordering set. The routine will
+ copy the data, so the original can be discared with
+ __initdata.
+
+
+Authour
+-------
+
+Ben Dooks,
+Copyright (c) 2007 Ben Dooks, Simtec Electronics
+Licensed under the GPL v2
The Samsung S3C24XX range of ARM9 System-on-Chip CPUs are supported
by the 's3c2410' architecture of ARM Linux. Currently the S3C2410,
- S3C2440 and S3C2442 devices are supported.
+ S3C2412, S3C2413, S3C2440 and S3C2442 devices are supported.
Support for the S3C2400 series is in progress.
- Support for the S3C2412 and S3C2413 CPUs is being merged.
-
-
Configuration
-------------
please check the machine specific documentation.
+Layout
+------
+
+ The core support files are located in the platform code contained in
+ arch/arm/plat-s3c24xx with headers in include/asm-arm/plat-s3c24xx.
+ This directory should be kept to items shared between the platform
+ code (arch/arm/plat-s3c24xx) and the arch/arm/mach-s3c24* code.
+
+ Each cpu has a directory with the support files for it, and the
+ machines that carry the device. For example S3C2410 is contained
+ in arch/arm/mach-s3c2410 and S3C2440 in arch/arm/mach-s3c2440
+
+ Register, kernel and platform data definitions are held in the
+ include/asm-arm/arch-s3c2410 directory.
+
+
Machines
--------
config ARCH_IOP13XX
bool "IOP13xx-based"
+ depends on MMU
+ select PLAT_IOP
select PCI
help
Support for Intel's IOP13XX (XScale) family of processors.
If you have any questions or comments about the Linux kernel port
to this board, send e-mail to <sjhill@cotw.com>.
+config ARCH_NS9XXX
+ bool "NetSilicon NS9xxx"
+ help
+ Say Y here if you intend to run this kernel on a NetSilicon NS9xxx
+ System.
+
+ <http://www.digi.com/products/microprocessors/index.jsp>
+
config ARCH_PNX4008
bool "Philips Nexperia PNX4008 Mobile"
help
bool "PXA2xx-based"
depends on MMU
select ARCH_MTD_XIP
+ select GENERIC_TIME
help
Support for Intel's PXA2XX processor line.
Support for StrongARM 11x0 based boards.
config ARCH_S3C2410
- bool "Samsung S3C2410, S3C2412, S3C2413, S3C2440, S3C2442"
+ bool "Samsung S3C2410, S3C2412, S3C2413, S3C2440, S3C2442, S3C2443"
help
Samsung S3C2410X CPU based systems, such as the Simtec Electronics
BAST (<http://www.simtec.co.uk/products/EB110ITX/>), the IPAQ 1940 or
source "arch/arm/mach-omap2/Kconfig"
+source "arch/arm/plat-s3c24xx/Kconfig"
+
+if ARCH_S3C2410
+source "arch/arm/mach-s3c2400/Kconfig"
source "arch/arm/mach-s3c2410/Kconfig"
+source "arch/arm/mach-s3c2412/Kconfig"
+source "arch/arm/mach-s3c2440/Kconfig"
+source "arch/arm/mach-s3c2442/Kconfig"
+source "arch/arm/mach-s3c2443/Kconfig"
+endif
source "arch/arm/mach-lh7a40x/Kconfig"
source "arch/arm/mach-realview/Kconfig"
-source "arch/arm/mach-at91rm9200/Kconfig"
+source "arch/arm/mach-at91/Kconfig"
source "arch/arm/mach-netx/Kconfig"
+source "arch/arm/mach-ns9xxx/Kconfig"
+
# Definitions to make life easier
config ARCH_ACORN
bool
be linked for and stored to. This address is dependent on your
own flash usage.
+config KEXEC
+ bool "Kexec system call (EXPERIMENTAL)"
+ depends on EXPERIMENTAL
+ help
+ kexec is a system call that implements the ability to shutdown your
+ current kernel, and to start another kernel. It is like a reboot
+ but it is indepedent of the system firmware. And like a reboot
+ you can start any kernel with it, not just Linux.
+
+ It is an ongoing process to be certain the hardware in a machine
+ is properly shutdown, so do not be surprised if this code does not
+ initially work for you. It may help to enable device hotplugging
+ support.
+
endmenu
if (ARCH_SA1100 || ARCH_INTEGRATOR || ARCH_OMAP || ARCH_IMX )
machine-$(CONFIG_ARCH_H720X) := h720x
machine-$(CONFIG_ARCH_AAEC2000) := aaec2000
machine-$(CONFIG_ARCH_REALVIEW) := realview
- machine-$(CONFIG_ARCH_AT91) := at91rm9200
- machine-$(CONFIG_ARCH_EP93XX) := ep93xx
- machine-$(CONFIG_ARCH_PNX4008) := pnx4008
- machine-$(CONFIG_ARCH_NETX) := netx
+ machine-$(CONFIG_ARCH_AT91) := at91rm9200
+ machine-$(CONFIG_ARCH_EP93XX) := ep93xx
+ machine-$(CONFIG_ARCH_PNX4008) := pnx4008
+ machine-$(CONFIG_ARCH_NETX) := netx
+ machine-$(CONFIG_ARCH_NS9XXX) := ns9xxx
+ textofs-$(CONFIG_ARCH_NS9XXX) := 0x00108000
ifeq ($(CONFIG_ARCH_EBSA110),y)
# This is what happens if you forget the IOCS16 line.
else
MACHINE :=
endif
-
+
export TEXT_OFFSET GZFLAGS MMUEXT
# Do we have FASTFPE?
# If we have a machine-specific directory, then include it in the build.
core-y += arch/arm/kernel/ arch/arm/mm/ arch/arm/common/
core-y += $(MACHINE)
+core-$(CONFIG_ARCH_S3C2410) += arch/arm/mach-s3c2400/
+core-$(CONFIG_ARCH_S3C2410) += arch/arm/mach-s3c2412/
+core-$(CONFIG_ARCH_S3C2410) += arch/arm/mach-s3c2440/
+core-$(CONFIG_ARCH_S3C2410) += arch/arm/mach-s3c2442/
+core-$(CONFIG_ARCH_S3C2410) += arch/arm/mach-s3c2443/
core-$(CONFIG_FPE_NWFPE) += arch/arm/nwfpe/
core-$(CONFIG_FPE_FASTFPE) += $(FASTFPE_OBJ)
core-$(CONFIG_VFP) += arch/arm/vfp/
# If we have a common platform directory, then include it in the build.
core-$(CONFIG_PLAT_IOP) += arch/arm/plat-iop/
core-$(CONFIG_ARCH_OMAP) += arch/arm/plat-omap/
+core-$(CONFIG_PLAT_S3C24XX) += arch/arm/plat-s3c24xx/
drivers-$(CONFIG_OPROFILE) += arch/arm/oprofile/
drivers-$(CONFIG_ARCH_CLPS7500) += drivers/acorn/char/
--- /dev/null
+Image
+zImage
#include <asm/cacheflush.h>
-#undef DEBUG
#undef STATS
#ifdef STATS
};
struct dmabounce_device_info {
- struct list_head node;
-
struct device *dev;
struct list_head safe_buffers;
#ifdef STATS
unsigned long total_allocs;
unsigned long map_op_count;
unsigned long bounce_count;
+ int attr_res;
#endif
struct dmabounce_pool small;
struct dmabounce_pool large;
rwlock_t lock;
};
-static LIST_HEAD(dmabounce_devs);
-
#ifdef STATS
-static void print_alloc_stats(struct dmabounce_device_info *device_info)
+static ssize_t dmabounce_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
{
- printk(KERN_INFO
- "%s: dmabounce: sbp: %lu, lbp: %lu, other: %lu, total: %lu\n",
- device_info->dev->bus_id,
- device_info->small.allocs, device_info->large.allocs,
+ struct dmabounce_device_info *device_info = dev->archdata.dmabounce;
+ return sprintf(buf, "%lu %lu %lu %lu %lu %lu\n",
+ device_info->small.allocs,
+ device_info->large.allocs,
device_info->total_allocs - device_info->small.allocs -
device_info->large.allocs,
- device_info->total_allocs);
+ device_info->total_allocs,
+ device_info->map_op_count,
+ device_info->bounce_count);
}
-#endif
-
-/* find the given device in the dmabounce device list */
-static inline struct dmabounce_device_info *
-find_dmabounce_dev(struct device *dev)
-{
- struct dmabounce_device_info *d;
- list_for_each_entry(d, &dmabounce_devs, node)
- if (d->dev == dev)
- return d;
-
- return NULL;
-}
+static DEVICE_ATTR(dmabounce_stats, 0400, dmabounce_show, NULL);
+#endif
/* allocate a 'safe' buffer and keep track of it */
if (pool)
pool->allocs++;
device_info->total_allocs++;
- if (device_info->total_allocs % 1000 == 0)
- print_alloc_stats(device_info);
#endif
write_lock_irqsave(&device_info->lock, flags);
/* ************************************************** */
-#ifdef STATS
-static void print_map_stats(struct dmabounce_device_info *device_info)
-{
- dev_info(device_info->dev,
- "dmabounce: map_op_count=%lu, bounce_count=%lu\n",
- device_info->map_op_count, device_info->bounce_count);
-}
-#endif
-
static inline dma_addr_t
map_single(struct device *dev, void *ptr, size_t size,
enum dma_data_direction dir)
{
- struct dmabounce_device_info *device_info = find_dmabounce_dev(dev);
+ struct dmabounce_device_info *device_info = dev->archdata.dmabounce;
dma_addr_t dma_addr;
int needs_bounce = 0;
ptr = buf->safe;
dma_addr = buf->safe_dma_addr;
+ } else {
+ /*
+ * We don't need to sync the DMA buffer since
+ * it was allocated via the coherent allocators.
+ */
+ consistent_sync(ptr, size, dir);
}
- consistent_sync(ptr, size, dir);
-
return dma_addr;
}
unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size,
enum dma_data_direction dir)
{
- struct dmabounce_device_info *device_info = find_dmabounce_dev(dev);
+ struct dmabounce_device_info *device_info = dev->archdata.dmabounce;
struct safe_buffer *buf = NULL;
/*
DO_STATS ( device_info->bounce_count++ );
if (dir == DMA_FROM_DEVICE || dir == DMA_BIDIRECTIONAL) {
- unsigned long ptr;
+ void *ptr = buf->ptr;
dev_dbg(dev,
"%s: copy back safe %p to unsafe %p size %d\n",
- __func__, buf->safe, buf->ptr, size);
- memcpy(buf->ptr, buf->safe, size);
+ __func__, buf->safe, ptr, size);
+ memcpy(ptr, buf->safe, size);
/*
* DMA buffers must have the same cache properties
* bidirectional case because we know the cache
* lines will be coherent with the data written.
*/
- ptr = (unsigned long)buf->ptr;
dmac_clean_range(ptr, ptr + size);
+ outer_clean_range(__pa(ptr), __pa(ptr) + size);
}
free_safe_buffer(device_info, buf);
}
sync_single(struct device *dev, dma_addr_t dma_addr, size_t size,
enum dma_data_direction dir)
{
- struct dmabounce_device_info *device_info = find_dmabounce_dev(dev);
+ struct dmabounce_device_info *device_info = dev->archdata.dmabounce;
struct safe_buffer *buf = NULL;
if (device_info)
default:
BUG();
}
- consistent_sync(buf->safe, size, dir);
+ /*
+ * No need to sync the safe buffer - it was allocated
+ * via the coherent allocators.
+ */
} else {
consistent_sync(dma_to_virt(dev, dma_addr), size, dir);
}
device_info->total_allocs = 0;
device_info->map_op_count = 0;
device_info->bounce_count = 0;
+ device_info->attr_res = device_create_file(dev, &dev_attr_dmabounce_stats);
#endif
- list_add(&device_info->node, &dmabounce_devs);
+ dev->archdata.dmabounce = device_info;
printk(KERN_INFO "dmabounce: registered device %s on %s bus\n",
dev->bus_id, dev->bus->name);
void
dmabounce_unregister_dev(struct device *dev)
{
- struct dmabounce_device_info *device_info = find_dmabounce_dev(dev);
+ struct dmabounce_device_info *device_info = dev->archdata.dmabounce;
+
+ dev->archdata.dmabounce = NULL;
if (!device_info) {
printk(KERN_WARNING
dma_pool_destroy(device_info->large.pool);
#ifdef STATS
- print_alloc_stats(device_info);
- print_map_stats(device_info);
+ if (device_info->attr_res == 0)
+ device_remove_file(dev, &dev_attr_dmabounce_stats);
#endif
- list_del(&device_info->node);
-
kfree(device_info);
printk(KERN_INFO "dmabounce: device %s on %s bus unregistered\n",
*
* o There is one CPU Interface per CPU, which sends interrupts sent
* by the Distributor, and interrupts generated locally, to the
- * associated CPU.
+ * associated CPU. The base address of the CPU interface is usually
+ * aliased so that the same address points to different chips depending
+ * on the CPU it is accessed from.
*
* Note that IRQs 0-31 are special - they are local to each CPU.
* As such, the enable set/clear, pending set/clear and active bit
#include <asm/mach/irq.h>
#include <asm/hardware/gic.h>
-static void __iomem *gic_dist_base;
-static void __iomem *gic_cpu_base;
static DEFINE_SPINLOCK(irq_controller_lock);
+struct gic_chip_data {
+ unsigned int irq_offset;
+ void __iomem *dist_base;
+ void __iomem *cpu_base;
+};
+
+#ifndef MAX_GIC_NR
+#define MAX_GIC_NR 1
+#endif
+
+static struct gic_chip_data gic_data[MAX_GIC_NR];
+
+static inline void __iomem *gic_dist_base(unsigned int irq)
+{
+ struct gic_chip_data *gic_data = get_irq_chip_data(irq);
+ return gic_data->dist_base;
+}
+
+static inline void __iomem *gic_cpu_base(unsigned int irq)
+{
+ struct gic_chip_data *gic_data = get_irq_chip_data(irq);
+ return gic_data->cpu_base;
+}
+
+static inline unsigned int gic_irq(unsigned int irq)
+{
+ struct gic_chip_data *gic_data = get_irq_chip_data(irq);
+ return irq - gic_data->irq_offset;
+}
+
/*
* Routines to acknowledge, disable and enable interrupts
*
u32 mask = 1 << (irq % 32);
spin_lock(&irq_controller_lock);
- writel(mask, gic_dist_base + GIC_DIST_ENABLE_CLEAR + (irq / 32) * 4);
- writel(irq, gic_cpu_base + GIC_CPU_EOI);
+ writel(mask, gic_dist_base(irq) + GIC_DIST_ENABLE_CLEAR + (gic_irq(irq) / 32) * 4);
+ writel(gic_irq(irq), gic_cpu_base(irq) + GIC_CPU_EOI);
spin_unlock(&irq_controller_lock);
}
u32 mask = 1 << (irq % 32);
spin_lock(&irq_controller_lock);
- writel(mask, gic_dist_base + GIC_DIST_ENABLE_CLEAR + (irq / 32) * 4);
+ writel(mask, gic_dist_base(irq) + GIC_DIST_ENABLE_CLEAR + (gic_irq(irq) / 32) * 4);
spin_unlock(&irq_controller_lock);
}
u32 mask = 1 << (irq % 32);
spin_lock(&irq_controller_lock);
- writel(mask, gic_dist_base + GIC_DIST_ENABLE_SET + (irq / 32) * 4);
+ writel(mask, gic_dist_base(irq) + GIC_DIST_ENABLE_SET + (gic_irq(irq) / 32) * 4);
spin_unlock(&irq_controller_lock);
}
#ifdef CONFIG_SMP
static void gic_set_cpu(unsigned int irq, cpumask_t mask_val)
{
- void __iomem *reg = gic_dist_base + GIC_DIST_TARGET + (irq & ~3);
+ void __iomem *reg = gic_dist_base(irq) + GIC_DIST_TARGET + (gic_irq(irq) & ~3);
unsigned int shift = (irq % 4) * 8;
unsigned int cpu = first_cpu(mask_val);
u32 val;
}
#endif
+static void fastcall gic_handle_cascade_irq(unsigned int irq,
+ struct irq_desc *desc)
+{
+ struct gic_chip_data *chip_data = get_irq_data(irq);
+ struct irq_chip *chip = get_irq_chip(irq);
+ unsigned int cascade_irq;
+ unsigned long status;
+
+ /* primary controller ack'ing */
+ chip->ack(irq);
+
+ spin_lock(&irq_controller_lock);
+ status = readl(chip_data->cpu_base + GIC_CPU_INTACK);
+ spin_unlock(&irq_controller_lock);
+
+ cascade_irq = (status & 0x3ff);
+ if (cascade_irq > 1020)
+ goto out;
+ if (cascade_irq < 32 || cascade_irq >= NR_IRQS) {
+ do_bad_IRQ(cascade_irq, desc);
+ goto out;
+ }
+
+ cascade_irq += chip_data->irq_offset;
+ generic_handle_irq(cascade_irq);
+
+ out:
+ /* primary controller unmasking */
+ chip->unmask(irq);
+}
+
static struct irq_chip gic_chip = {
.name = "GIC",
.ack = gic_ack_irq,
#endif
};
-void __init gic_dist_init(void __iomem *base)
+void __init gic_cascade_irq(unsigned int gic_nr, unsigned int irq)
+{
+ if (gic_nr >= MAX_GIC_NR)
+ BUG();
+ if (set_irq_data(irq, &gic_data[gic_nr]) != 0)
+ BUG();
+ set_irq_chained_handler(irq, gic_handle_cascade_irq);
+}
+
+void __init gic_dist_init(unsigned int gic_nr, void __iomem *base,
+ unsigned int irq_start)
{
unsigned int max_irq, i;
u32 cpumask = 1 << smp_processor_id();
+ if (gic_nr >= MAX_GIC_NR)
+ BUG();
+
cpumask |= cpumask << 8;
cpumask |= cpumask << 16;
- gic_dist_base = base;
+ gic_data[gic_nr].dist_base = base;
+ gic_data[gic_nr].irq_offset = (irq_start - 1) & ~31;
writel(0, base + GIC_DIST_CTRL);
/*
* Setup the Linux IRQ subsystem.
*/
- for (i = 29; i < max_irq; i++) {
+ for (i = irq_start; i < gic_data[gic_nr].irq_offset + max_irq; i++) {
set_irq_chip(i, &gic_chip);
+ set_irq_chip_data(i, &gic_data[gic_nr]);
set_irq_handler(i, handle_level_irq);
set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
}
writel(1, base + GIC_DIST_CTRL);
}
-void __cpuinit gic_cpu_init(void __iomem *base)
+void __cpuinit gic_cpu_init(unsigned int gic_nr, void __iomem *base)
{
- gic_cpu_base = base;
+ if (gic_nr >= MAX_GIC_NR)
+ BUG();
+
+ gic_data[gic_nr].cpu_base = base;
+
writel(0xf0, base + GIC_CPU_PRIMASK);
writel(1, base + GIC_CPU_CTRL);
}
{
unsigned long map = *cpus_addr(cpumask);
- writel(map << 16 | irq, gic_dist_base + GIC_DIST_SOFTINT);
+ /* this always happens on GIC0 */
+ writel(map << 16 | irq, gic_data[0].dist_base + GIC_DIST_SOFTINT);
}
#endif
--- /dev/null
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.20-rc1
+# Mon Jan 8 16:06:54 2007
+#
+CONFIG_ARM=y
+# CONFIG_GENERIC_TIME is not set
+CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_UTS_NS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SHMEM=y
+CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+CONFIG_ARCH_AT91=y
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_OMAP is not set
+
+#
+# Atmel AT91 System-on-Chip
+#
+# CONFIG_ARCH_AT91RM9200 is not set
+# CONFIG_ARCH_AT91SAM9260 is not set
+# CONFIG_ARCH_AT91SAM9261 is not set
+CONFIG_ARCH_AT91SAM9263=y
+
+#
+# AT91SAM9263 Board Type
+#
+CONFIG_MACH_AT91SAM9263EK=y
+
+#
+# AT91 Board Options
+#
+CONFIG_MTD_AT91_DATAFLASH_CARD=y
+# CONFIG_MTD_NAND_AT91_BUSWIDTH_16 is not set
+
+#
+# AT91 Feature Selections
+#
+# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+# CONFIG_ARM_THUMB is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+
+#
+# Bus support
+#
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_PREEMPT is not set
+# CONFIG_NO_IDLE_HZ is not set
+CONFIG_HZ=100
+# CONFIG_AEABI is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw"
+# CONFIG_XIP_KERNEL is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+# CONFIG_APM is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_NETDEBUG is not set
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_SYS_HYPERVISOR is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_OBSOLETE_CHIPS is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+CONFIG_MTD_DATAFLASH=y
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+
+#
+# NAND Flash Device Drivers
+#
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+CONFIG_MTD_NAND_AT91=y
+# CONFIG_MTD_NAND_NANDSIM is not set
+
+#
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_DEBUG is not set
+
+#
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+# CONFIG_ATA is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# I2O device support
+#
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+
+#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+
+#
+# Ethernet (10000 Mbit)
+#
+
+#
+# Token Ring devices
+#
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_TSDEV=y
+CONFIG_INPUT_TSDEV_SCREEN_X=240
+CONFIG_INPUT_TSDEV_SCREEN_Y=320
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_ADS7846=y
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_UCB1400 is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+# CONFIG_SERIAL_ATMEL_TTYAT is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_NVRAM is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
+# I2C support
+#
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Algorithms
+#
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+CONFIG_I2C_AT91=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_PCA is not set
+# CONFIG_I2C_PCA_ISA is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_ATMEL=y
+# CONFIG_SPI_BITBANG is not set
+
+#
+# SPI Protocol Masters
+#
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
+# Misc devices
+#
+# CONFIG_TIFM_CORE is not set
+
+#
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+# CONFIG_USB_DABUSB is not set
+
+#
+# Graphics support
+#
+# CONFIG_FIRMWARE_EDID is not set
+CONFIG_FB=y
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE is not set
+
+#
+# Logo configuration
+#
+# CONFIG_LOGO is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# HID Devices
+#
+CONFIG_HID=y
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_BANDWIDTH is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_MULTITHREAD_PROBE is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Input Devices
+#
+# CONFIG_USB_HID is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+# CONFIG_USB_AIPTEK is not set
+# CONFIG_USB_WACOM is not set
+# CONFIG_USB_ACECAD is not set
+# CONFIG_USB_KBTAB is not set
+# CONFIG_USB_POWERMATE is not set
+# CONFIG_USB_TOUCHSCREEN is not set
+# CONFIG_USB_YEALINK is not set
+# CONFIG_USB_XPAD is not set
+# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_ATI_REMOTE2 is not set
+# CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET_MII is not set
+# CONFIG_USB_USBNET is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_PXA2XX is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+CONFIG_USB_GADGET_AT91=y
+CONFIG_USB_AT91=y
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+CONFIG_USB_ZERO=m
+# CONFIG_USB_ETH is not set
+CONFIG_USB_GADGETFS=m
+CONFIG_USB_FILE_STORAGE=m
+# CONFIG_USB_FILE_STORAGE_TEST is not set
+CONFIG_USB_G_SERIAL=m
+# CONFIG_USB_MIDI_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_AT91=m
+# CONFIG_MMC_TIFM_SD is not set
+
+#
+# Real Time Clock
+#
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+# CONFIG_MSDOS_FS is not set
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_CRAMFS=y
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+# CONFIG_NFS_V3 is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+CONFIG_NLS_CODEPAGE_850=y
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_RWSEMS is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+CONFIG_FRAME_POINTER=y
+CONFIG_FORCED_INLINING=y
+# CONFIG_RCU_TORTURE_TEST is not set
+CONFIG_DEBUG_USER=y
+# CONFIG_DEBUG_ERRORS is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_PLIST=y
+CONFIG_IOMAP_COPY=y
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_RS5C372 is not set
# CONFIG_RTC_DRV_M48T86 is not set
-CONFIG_RTC_DRV_AT91=y
+CONFIG_RTC_DRV_AT91RM9200=y
# CONFIG_RTC_DRV_TEST is not set
#
# Mapping drivers for chip access
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0
+CONFIG_MTD_PHYSMAP_LEN=0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=0
# CONFIG_MTD_ARM_INTEGRATOR is not set
# CONFIG_MTD_PLATRAM is not set
-CONFIG_MTD_CSB337=y
#
# Self-contained MTD device drivers
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_RS5C372 is not set
# CONFIG_RTC_DRV_M48T86 is not set
-CONFIG_RTC_DRV_AT91=y
+CONFIG_RTC_DRV_AT91RM9200=y
# CONFIG_RTC_DRV_TEST is not set
# CONFIG_RTC_DRV_V3020 is not set
# Mapping drivers for chip access
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0
+CONFIG_MTD_PHYSMAP_LEN=0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=0
# CONFIG_MTD_ARM_INTEGRATOR is not set
# CONFIG_MTD_PLATRAM is not set
-CONFIG_MTD_CSB637=y
#
# Self-contained MTD device drivers
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_RS5C372 is not set
# CONFIG_RTC_DRV_M48T86 is not set
-CONFIG_RTC_DRV_AT91=y
+CONFIG_RTC_DRV_AT91RM9200=y
# CONFIG_RTC_DRV_TEST is not set
#
--- /dev/null
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.20
+# Thu Feb 15 20:51:47 2007
+#
+CONFIG_ARM=y
+# CONFIG_GENERIC_TIME is not set
+CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_UTS_NS is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SHMEM=y
+CONFIG_SLAB=y
+# CONFIG_VM_EVENT_COUNTERS is not set
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_L7200 is not set
+CONFIG_ARCH_NS9XXX=y
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_OMAP is not set
+
+#
+# NS9xxx Implementations
+#
+CONFIG_MACH_CC9P9360DEV=y
+CONFIG_PROCESSOR_NS9360=y
+CONFIG_BOARD_A9M9750DEV=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+# CONFIG_ARM_THUMB is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+
+#
+# Bus support
+#
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_PREEMPT is not set
+# CONFIG_NO_IDLE_HZ is not set
+CONFIG_HZ=100
+# CONFIG_AEABI is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE=""
+# CONFIG_XIP_KERNEL is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+# CONFIG_APM is not set
+
+#
+# Networking
+#
+# CONFIG_NET is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_SYS_HYPERVISOR is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+
+#
+# Memory Technology Devices (MTD)
+#
+# CONFIG_MTD is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_CDROM_PKTCDVD is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_NETLINK is not set
+
+#
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+# CONFIG_ATA is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# I2O device support
+#
+
+#
+# ISDN subsystem
+#
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_SERPORT is not set
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+# CONFIG_SERIAL_8250_MANY_PORTS is not set
+# CONFIG_SERIAL_8250_SHARE_IRQ is not set
+# CONFIG_SERIAL_8250_DETECT_IRQ is not set
+# CONFIG_SERIAL_8250_RSA is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_NVRAM is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
+# I2C support
+#
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
+# Misc devices
+#
+# CONFIG_TIFM_CORE is not set
+
+#
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+
+#
+# Graphics support
+#
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# HID Devices
+#
+CONFIG_HID=y
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# Real Time Clock
+#
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+# CONFIG_NLS is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_DETECT_SOFTLOCKUP is not set
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_RWSEMS is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+CONFIG_FRAME_POINTER=y
+CONFIG_FORCED_INLINING=y
+# CONFIG_RCU_TORTURE_TEST is not set
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_ERRORS=y
+CONFIG_DEBUG_LL=y
+CONFIG_DEBUG_ICEDCC=y
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC32 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_PLIST=y
+CONFIG_IOMAP_COPY=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.19-rc4
-# Fri Nov 3 17:41:31 2006
+# Linux kernel version: 2.6.20
+# Thu Feb 15 11:26:24 2007
#
CONFIG_ARM=y
# CONFIG_GENERIC_TIME is not set
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_VECTORS_BASE=0xffff0000
# CONFIG_UTS_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
+CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
-# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
# Block layer
#
CONFIG_BLOCK=y
+# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
#
# IO Schedulers
# CONFIG_ARCH_IMX is not set
# CONFIG_ARCH_IOP32X is not set
# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IOP13XX is not set
# CONFIG_ARCH_IXP4XX is not set
# CONFIG_ARCH_IXP2000 is not set
# CONFIG_ARCH_IXP23XX is not set
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_LH7A40X is not set
# CONFIG_ARCH_OMAP is not set
+CONFIG_PLAT_S3C24XX=y
+CONFIG_CPU_S3C244X=y
+CONFIG_PM_SIMTEC=y
+# CONFIG_S3C2410_BOOT_WATCHDOG is not set
+# CONFIG_S3C2410_BOOT_ERROR_RESET is not set
+# CONFIG_S3C2410_PM_DEBUG is not set
+# CONFIG_S3C2410_PM_CHECK is not set
+CONFIG_S3C2410_LOWLEVEL_UART_PORT=0
+CONFIG_S3C2410_DMA=y
+# CONFIG_S3C2410_DMA_DEBUG is not set
+CONFIG_MACH_SMDK=y
#
-# S3C24XX Implementations
+# S3C2400 Machines
#
-# CONFIG_MACH_AML_M5900 is not set
-CONFIG_MACH_ANUBIS=y
-CONFIG_MACH_OSIRIS=y
-CONFIG_ARCH_BAST=y
-CONFIG_BAST_PC104_IRQ=y
+CONFIG_CPU_S3C2410=y
+CONFIG_CPU_S3C2410_DMA=y
+CONFIG_S3C2410_PM=y
+CONFIG_S3C2410_GPIO=y
+CONFIG_S3C2410_CLOCK=y
+
+#
+# S3C2410 Machines
+#
+CONFIG_ARCH_SMDK2410=y
CONFIG_ARCH_H1940=y
+CONFIG_PM_H1940=y
CONFIG_MACH_N30=y
-CONFIG_MACH_SMDK=y
-CONFIG_ARCH_SMDK2410=y
-CONFIG_ARCH_S3C2440=y
-CONFIG_SMDK2440_CPU2440=y
-CONFIG_SMDK2440_CPU2442=y
-CONFIG_MACH_S3C2413=y
-CONFIG_MACH_SMDK2413=y
-CONFIG_MACH_VR1000=y
-CONFIG_MACH_RX3715=y
+CONFIG_ARCH_BAST=y
CONFIG_MACH_OTOM=y
-CONFIG_MACH_NEXCODER_2440=y
-CONFIG_MACH_VSTMS=y
-CONFIG_S3C2410_CLOCK=y
-CONFIG_S3C2410_PM=y
-CONFIG_CPU_S3C2410_DMA=y
-CONFIG_CPU_S3C2410=y
-CONFIG_S3C2412_PM=y
+CONFIG_MACH_AML_M5900=y
+CONFIG_BAST_PC104_IRQ=y
+CONFIG_MACH_VR1000=y
CONFIG_CPU_S3C2412=y
-CONFIG_CPU_S3C244X=y
+CONFIG_S3C2412_DMA=y
+CONFIG_S3C2412_PM=y
+
+#
+# S3C2412 Machines
+#
+CONFIG_MACH_SMDK2413=y
+CONFIG_MACH_S3C2413=y
+CONFIG_MACH_VSTMS=y
CONFIG_CPU_S3C2440=y
+CONFIG_S3C2440_DMA=y
+
+#
+# S3C2440 Machines
+#
+CONFIG_MACH_ANUBIS=y
+CONFIG_MACH_OSIRIS=y
+CONFIG_MACH_RX3715=y
+CONFIG_ARCH_S3C2440=y
+CONFIG_MACH_NEXCODER_2440=y
+CONFIG_SMDK2440_CPU2440=y
CONFIG_CPU_S3C2442=y
#
-# S3C2410 Boot
+# S3C2442 Machines
#
-# CONFIG_S3C2410_BOOT_WATCHDOG is not set
-# CONFIG_S3C2410_BOOT_ERROR_RESET is not set
+CONFIG_SMDK2440_CPU2442=y
+CONFIG_CPU_S3C2443=y
#
-# S3C2410 Setup
+# S3C2443 Machines
#
-CONFIG_S3C2410_DMA=y
-# CONFIG_S3C2410_DMA_DEBUG is not set
-# CONFIG_S3C2410_PM_DEBUG is not set
-# CONFIG_S3C2410_PM_CHECK is not set
-CONFIG_PM_SIMTEC=y
-CONFIG_S3C2410_LOWLEVEL_UART_PORT=0
+CONFIG_MACH_SMDK2443=y
#
# Processor Type
# CONFIG_CPU_DCACHE_DISABLE is not set
# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+# CONFIG_OUTER_CACHE is not set
#
# Bus support
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
# User Modules And Translation Layers
#
CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
# CONFIG_SCSI is not set
# CONFIG_SCSI_NETLINK is not set
+#
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+# CONFIG_ATA is not set
+
#
# Multi-device support (RAID and LVM)
#
# CONFIG_DIGIEPCA is not set
# CONFIG_MOXA_INTELLIO is not set
# CONFIG_MOXA_SMARTIO is not set
-# CONFIG_ISI is not set
+# CONFIG_MOXA_SMARTIO_NEW is not set
# CONFIG_SYNCLINKMP is not set
# CONFIG_N_HDLC is not set
# CONFIG_RISCOM8 is not set
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-# CONFIG_SERIAL_8250_DETECT_IRQ is not set
-# CONFIG_SERIAL_8250_RSA is not set
# CONFIG_SERIAL_8250_FOURPORT is not set
# CONFIG_SERIAL_8250_ACCENT is not set
# CONFIG_SERIAL_8250_BOCA is not set
+# CONFIG_SERIAL_8250_EXAR_ST16C554 is not set
# CONFIG_SERIAL_8250_HUB6 is not set
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+# CONFIG_SERIAL_8250_DETECT_IRQ is not set
+# CONFIG_SERIAL_8250_RSA is not set
#
# Non-8250 serial port support
# CONFIG_NVRAM is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
# CONFIG_RAW_DRIVER is not set
#
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
#
# CONFIG_SOUND is not set
+#
+# HID Devices
+#
+CONFIG_HID=y
+
#
# USB support
#
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET_MII is not set
# CONFIG_USB_USBNET is not set
CONFIG_USB_MON=y
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
-CONFIG_JFFS_FS=y
-CONFIG_JFFS_FS_VERBOSE=0
-# CONFIG_JFFS_PROC_FS is not set
CONFIG_JFFS2_FS=y
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
CONFIG_JFFS2_ZLIB=y
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
+CONFIG_CRAMFS=y
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
#
# Profiling support
#
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=16
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_FS is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
CONFIG_FRAME_POINTER=y
CONFIG_FORCED_INLINING=y
-# CONFIG_HEADERS_CHECK is not set
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_DEBUG_USER=y
# CONFIG_DEBUG_ERRORS is not set
#
# Library routines
#
+CONFIG_BITREVERSE=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
CONFIG_CRC32=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_PLIST=y
+CONFIG_IOMAP_COPY=y
obj-$(CONFIG_ISA_DMA) += dma-isa.o
obj-$(CONFIG_PCI) += bios32.o isa.o
obj-$(CONFIG_SMP) += smp.o
+obj-$(CONFIG_KEXEC) += machine_kexec.o relocate_kernel.o
obj-$(CONFIG_OABI_COMPAT) += sys_oabi-compat.o
obj-$(CONFIG_CRUNCH) += crunch.o crunch-bits.o
CALL(sys_move_pages)
/* 345 */ CALL(sys_getcpu)
CALL(sys_ni_syscall) /* eventually epoll_pwait */
+ CALL(sys_kexec_load)
#ifndef syscalls_counted
.equ syscalls_padding, ((NR_syscalls + 3) & ~3) - NR_syscalls
#define syscalls_counted
static int __init crunch_init(void)
{
thread_register_notifier(&crunch_notifier_block);
+ elf_hwcap |= HWCAP_CRUNCH;
return 0;
}
ec->fiqmask = 4;
}
- for (i = 0; i < sizeof(blacklist) / sizeof(*blacklist); i++)
+ for (i = 0; i < ARRAY_SIZE(blacklist); i++)
if (blacklist[i].manufacturer == ec->cid.manufacturer &&
blacklist[i].product == ec->cid.product) {
ec->card_desc = blacklist[i].type;
@ cpsr_<exception>, "old_r0"
mov r0, sp
- and r2, r6, #0x1f
b bad_mode
/*
--- /dev/null
+/*
+ * machine_kexec.c - handle transition of Linux booting another kernel
+ */
+
+#include <linux/mm.h>
+#include <linux/kexec.h>
+#include <linux/delay.h>
+#include <linux/reboot.h>
+#include <asm/pgtable.h>
+#include <asm/pgalloc.h>
+#include <asm/mmu_context.h>
+#include <asm/io.h>
+#include <asm/cacheflush.h>
+#include <asm/mach-types.h>
+
+const extern unsigned char relocate_new_kernel[];
+const extern unsigned int relocate_new_kernel_size;
+
+extern void setup_mm_for_reboot(char mode);
+
+extern unsigned long kexec_start_address;
+extern unsigned long kexec_indirection_page;
+extern unsigned long kexec_mach_type;
+
+/*
+ * Provide a dummy crash_notes definition while crash dump arrives to arm.
+ * This prevents breakage of crash_notes attribute in kernel/ksysfs.c.
+ */
+
+int machine_kexec_prepare(struct kimage *image)
+{
+ return 0;
+}
+
+void machine_kexec_cleanup(struct kimage *image)
+{
+}
+
+void machine_shutdown(void)
+{
+}
+
+void machine_crash_shutdown(struct pt_regs *regs)
+{
+}
+
+void machine_kexec(struct kimage *image)
+{
+ unsigned long page_list;
+ unsigned long reboot_code_buffer_phys;
+ void *reboot_code_buffer;
+
+
+ page_list = image->head & PAGE_MASK;
+
+ /* we need both effective and real address here */
+ reboot_code_buffer_phys =
+ page_to_pfn(image->control_code_page) << PAGE_SHIFT;
+ reboot_code_buffer = page_address(image->control_code_page);
+
+ /* Prepare parameters for reboot_code_buffer*/
+ kexec_start_address = image->start;
+ kexec_indirection_page = page_list;
+ kexec_mach_type = machine_arch_type;
+
+ /* copy our kernel relocation code to the control code page */
+ memcpy(reboot_code_buffer,
+ relocate_new_kernel, relocate_new_kernel_size);
+
+
+ flush_icache_range((unsigned long) reboot_code_buffer,
+ (unsigned long) reboot_code_buffer + KEXEC_CONTROL_CODE_SIZE);
+ printk(KERN_INFO "Bye!\n");
+
+ cpu_proc_fin();
+ setup_mm_for_reboot(0); /* mode is not used, so just pass 0*/
+ cpu_reset(reboot_code_buffer_phys);
+}
#include <asm/uaccess.h>
#include <asm/mach/time.h>
-extern const char *processor_modes[];
+static const char *processor_modes[] = {
+ "USER_26", "FIQ_26" , "IRQ_26" , "SVC_26" , "UK4_26" , "UK5_26" , "UK6_26" , "UK7_26" ,
+ "UK8_26" , "UK9_26" , "UK10_26", "UK11_26", "UK12_26", "UK13_26", "UK14_26", "UK15_26",
+ "USER_32", "FIQ_32" , "IRQ_32" , "SVC_32" , "UK4_32" , "UK5_32" , "UK6_32" , "ABT_32" ,
+ "UK8_32" , "UK9_32" , "UK10_32", "UND_32" , "UK12_32", "UK13_32", "UK14_32", "SYS_32"
+};
+
extern void setup_mm_for_reboot(char mode);
static volatile int hlt_counter;
--- /dev/null
+/*
+ * relocate_kernel.S - put the kernel image in place to boot
+ */
+
+#include <asm/kexec.h>
+
+ .globl relocate_new_kernel
+relocate_new_kernel:
+
+ ldr r0,kexec_indirection_page
+ ldr r1,kexec_start_address
+
+
+0: /* top, read another word for the indirection page */
+ ldr r3, [r0],#4
+
+ /* Is it a destination page. Put destination address to r4 */
+ tst r3,#1,0
+ beq 1f
+ bic r4,r3,#1
+ b 0b
+1:
+ /* Is it an indirection page */
+ tst r3,#2,0
+ beq 1f
+ bic r0,r3,#2
+ b 0b
+1:
+
+ /* are we done ? */
+ tst r3,#4,0
+ beq 1f
+ b 2f
+
+1:
+ /* is it source ? */
+ tst r3,#8,0
+ beq 0b
+ bic r3,r3,#8
+ mov r6,#1024
+9:
+ ldr r5,[r3],#4
+ str r5,[r4],#4
+ subs r6,r6,#1
+ bne 9b
+ b 0b
+
+2:
+ /* Jump to relocated kernel */
+ mov lr,r1
+ mov r0,#0
+ ldr r1,kexec_mach_type
+ mov r2,#0
+ mov pc,lr
+
+ .globl kexec_start_address
+kexec_start_address:
+ .long 0x0
+
+ .globl kexec_indirection_page
+kexec_indirection_page:
+ .long 0x0
+
+ .globl kexec_mach_type
+kexec_mach_type:
+ .long 0x0
+
+relocate_new_kernel_end:
+
+ .globl relocate_new_kernel_size
+relocate_new_kernel_size:
+ .long relocate_new_kernel_end - relocate_new_kernel
+
+
#ifdef MULTI_CACHE
struct cpu_cache_fns cpu_cache;
#endif
+#ifdef CONFIG_OUTER_CACHE
+struct outer_cache_fns outer_cache;
+#endif
struct stack {
u32 irq[3];
*/
struct sys_timer *system_timer;
+#if defined(CONFIG_RTC_DRV_CMOS) || defined(CONFIG_RTC_DRV_CMOS_MODULE)
/* this needs a better home */
DEFINE_SPINLOCK(rtc_lock);
-#ifdef CONFIG_SA1100_RTC_MODULE
+#ifdef CONFIG_RTC_DRV_CMOS_MODULE
EXPORT_SYMBOL(rtc_lock);
#endif
+#endif /* pc-style 'CMOS' RTC support */
/* change this if you have some constant time drift */
#define USECS_PER_JIFFY (1000000/HZ)
#include "ptrace.h"
#include "signal.h"
-const char *processor_modes[]=
-{ "USER_26", "FIQ_26" , "IRQ_26" , "SVC_26" , "UK4_26" , "UK5_26" , "UK6_26" , "UK7_26" ,
- "UK8_26" , "UK9_26" , "UK10_26", "UK11_26", "UK12_26", "UK13_26", "UK14_26", "UK15_26",
- "USER_32", "FIQ_32" , "IRQ_32" , "SVC_32" , "UK4_32" , "UK5_32" , "UK6_32" , "ABT_32" ,
- "UK8_32" , "UK9_32" , "UK10_32", "UND_32" , "UK12_32", "UK13_32", "UK14_32", "SYS_32"
-};
-
static const char *handler[]= { "prefetch abort", "data abort", "address exception", "interrupt" };
#ifdef CONFIG_DEBUG_USER
regs->ARM_pc -= correction;
pc = (void __user *)instruction_pointer(regs);
- if (thumb_mode(regs)) {
+
+ if (processor_mode(regs) == SVC_MODE) {
+ instr = *(u32 *) pc;
+ } else if (thumb_mode(regs)) {
get_user(instr, (u16 __user *)pc);
} else {
get_user(instr, (u32 __user *)pc);
* It never returns, and never tries to sync. We hope that we can at least
* dump out some state information...
*/
-asmlinkage void bad_mode(struct pt_regs *regs, int reason, int proc_mode)
+asmlinkage void bad_mode(struct pt_regs *regs, int reason)
{
console_verbose();
- printk(KERN_CRIT "Bad mode in %s handler detected: mode %s\n",
- handler[reason], processor_modes[proc_mode]);
+ printk(KERN_CRIT "Bad mode in %s handler detected\n", handler[reason]);
die("Oops - bad mode", regs, 0);
local_irq_disable();
bool "AT91RM9200"
config ARCH_AT91SAM9260
- bool "AT91SAM9260"
+ bool "AT91SAM9260 or AT91SAM9XE"
config ARCH_AT91SAM9261
bool "AT91SAM9261"
+config ARCH_AT91SAM9263
+ bool "AT91SAM9263"
+
endchoice
# ----------------------------------------------------------
if ARCH_AT91SAM9260
-comment "AT91SAM9260 Board Type"
+comment "AT91SAM9260 Variants"
+
+config ARCH_AT91SAM9260_SAM9XE
+ bool "AT91SAM9XE"
+ depends on ARCH_AT91SAM9260
+ help
+ Select this if you are using Atmel's AT91SAM9XE System-on-Chip.
+ They are basicaly AT91SAM9260s with various sizes of embedded Flash.
+
+comment "AT91SAM9260 / AT91SAM9XE Board Type"
config MACH_AT91SAM9260EK
- bool "Atmel AT91SAM9260-EK Evaluation Kit"
+ bool "Atmel AT91SAM9260-EK / AT91SAM9XE Evaluation Kit"
depends on ARCH_AT91SAM9260
help
- Select this if you are using Atmel's AT91SAM9260-EK Evaluation Kit.
+ Select this if you are using Atmel's AT91SAM9260-EK or AT91SAM9XE Evaluation Kit
<http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3933>
endif
# ----------------------------------------------------------
+if ARCH_AT91SAM9263
+
+comment "AT91SAM9263 Board Type"
+
+config MACH_AT91SAM9263EK
+ bool "Atmel AT91SAM9263-EK Evaluation Kit"
+ depends on ARCH_AT91SAM9263
+ help
+ Select this if you are using Atmel's AT91SAM9263-EK Evaluation Kit.
+ <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4057>
+
+endif
+
+# ----------------------------------------------------------
+
comment "AT91 Board Options"
config MTD_AT91_DATAFLASH_CARD
bool "Enable DataFlash Card support"
- depends on (ARCH_AT91RM9200DK || MACH_AT91RM9200EK || MACH_AT91SAM9260EK || MACH_AT91SAM9261EK)
+ depends on (ARCH_AT91RM9200DK || MACH_AT91RM9200EK || MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9263EK)
help
Enable support for the DataFlash card.
config MTD_NAND_AT91_BUSWIDTH_16
bool "Enable 16-bit data bus interface to NAND flash"
- depends on (MACH_AT91SAM9261EK || MACH_AT91SAM9260EK)
+ depends on (MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9263EK)
help
On AT91SAM926x boards both types of NAND flash can be present
(8 and 16 bit data bus width).
obj-$(CONFIG_ARCH_AT91RM9200) += at91rm9200.o at91rm9200_time.o at91rm9200_devices.o
obj-$(CONFIG_ARCH_AT91SAM9260) += at91sam9260.o at91sam926x_time.o at91sam9260_devices.o
obj-$(CONFIG_ARCH_AT91SAM9261) += at91sam9261.o at91sam926x_time.o at91sam9261_devices.o
+obj-$(CONFIG_ARCH_AT91SAM9263) += at91sam9263.o at91sam926x_time.o at91sam9263_devices.o
# AT91RM9200 board-specific support
obj-$(CONFIG_MACH_ONEARM) += board-1arm.o
# AT91SAM9261 board-specific support
obj-$(CONFIG_MACH_AT91SAM9261EK) += board-sam9261ek.o
+# AT91SAM9263 board-specific support
+obj-$(CONFIG_MACH_AT91SAM9263EK) += board-sam9263ek.o
+
# LEDs support
led-$(CONFIG_ARCH_AT91RM9200DK) += leds.o
led-$(CONFIG_MACH_AT91RM9200EK) += leds.o
/*
- * arch/arm/mach-at91rm9200/at91rm9200.c
+ * arch/arm/mach-at91/at91rm9200.c
*
* Copyright (C) 2005 SAN People
*
.pmc_mask = 1 << AT91RM9200_ID_PIOD,
.type = CLK_TYPE_PERIPHERAL,
};
+static struct clk tc0_clk = {
+ .name = "tc0_clk",
+ .pmc_mask = 1 << AT91RM9200_ID_TC0,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk tc1_clk = {
+ .name = "tc1_clk",
+ .pmc_mask = 1 << AT91RM9200_ID_TC1,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk tc2_clk = {
+ .name = "tc2_clk",
+ .pmc_mask = 1 << AT91RM9200_ID_TC2,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk tc3_clk = {
+ .name = "tc3_clk",
+ .pmc_mask = 1 << AT91RM9200_ID_TC3,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk tc4_clk = {
+ .name = "tc4_clk",
+ .pmc_mask = 1 << AT91RM9200_ID_TC4,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk tc5_clk = {
+ .name = "tc5_clk",
+ .pmc_mask = 1 << AT91RM9200_ID_TC5,
+ .type = CLK_TYPE_PERIPHERAL,
+};
static struct clk *periph_clocks[] __initdata = {
&pioA_clk,
&twi_clk,
&spi_clk,
// ssc 0 .. ssc2
- // tc0 .. tc5
+ &tc0_clk,
+ &tc1_clk,
+ &tc2_clk,
+ &tc3_clk,
+ &tc4_clk,
+ &tc5_clk,
&ohci_clk,
ðer_clk,
// irq0 .. irq6
/*
- * arch/arm/mach-at91rm9200/at91rm9200_devices.c
+ * arch/arm/mach-at91/at91rm9200_devices.c
*
* Copyright (C) 2005 Thibaut VARENE <varenet@parisc-linux.org>
* Copyright (C) 2005 David Brownell
.num_resources = ARRAY_SIZE(mmc_resources),
};
-void __init at91_add_device_mmc(struct at91_mmc_data *data)
+void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data)
{
if (!data)
return;
platform_device_register(&at91rm9200_mmc_device);
}
#else
-void __init at91_add_device_mmc(struct at91_mmc_data *data) {}
+void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
#endif
void __init at91_init_leds(u8 cpu_led, u8 timer_led)
{
+ /* Enable GPIO to access the LEDs */
+ at91_set_gpio_output(cpu_led, 1);
+ at91_set_gpio_output(timer_led, 1);
+
at91_leds_cpu = cpu_led;
at91_leds_timer = timer_led;
}
/*
- * linux/arch/arm/mach-at91rm9200/at91rm9200_time.c
+ * linux/arch/arm/mach-at91/at91rm9200_time.c
*
* Copyright (C) 2003 SAN People
* Copyright (C) 2003 ATMEL
/*
- * arch/arm/mach-at91rm9200/at91sam9260.c
+ * arch/arm/mach-at91/at91sam9260.c
*
* Copyright (C) 2006 SAN People
*
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
+#include <asm/arch/cpu.h>
#include <asm/arch/at91sam9260.h>
#include <asm/arch/at91_pmc.h>
#include <asm/arch/at91_rstc.h>
.pfn = __phys_to_pfn(AT91_BASE_SYS),
.length = SZ_16K,
.type = MT_DEVICE,
- }, {
+ }
+};
+
+static struct map_desc at91sam9260_sram_desc[] __initdata = {
+ {
.virtual = AT91_IO_VIRT_BASE - AT91SAM9260_SRAM0_SIZE,
.pfn = __phys_to_pfn(AT91SAM9260_SRAM0_BASE),
.length = AT91SAM9260_SRAM0_SIZE,
.pfn = __phys_to_pfn(AT91SAM9260_SRAM1_BASE),
.length = AT91SAM9260_SRAM1_SIZE,
.type = MT_DEVICE,
- },
+ }
+};
+
+static struct map_desc at91sam9xe_sram_desc[] __initdata = {
+ {
+ .pfn = __phys_to_pfn(AT91SAM9XE_SRAM_BASE),
+ .type = MT_DEVICE,
+ }
};
/* --------------------------------------------------------------------
.pmc_mask = 1 << AT91SAM9260_ID_SPI1,
.type = CLK_TYPE_PERIPHERAL,
};
+static struct clk tc0_clk = {
+ .name = "tc0_clk",
+ .pmc_mask = 1 << AT91SAM9260_ID_TC0,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk tc1_clk = {
+ .name = "tc1_clk",
+ .pmc_mask = 1 << AT91SAM9260_ID_TC1,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk tc2_clk = {
+ .name = "tc2_clk",
+ .pmc_mask = 1 << AT91SAM9260_ID_TC2,
+ .type = CLK_TYPE_PERIPHERAL,
+};
static struct clk ohci_clk = {
.name = "ohci_clk",
.pmc_mask = 1 << AT91SAM9260_ID_UHP,
.type = CLK_TYPE_PERIPHERAL,
};
-static struct clk ether_clk = {
- .name = "ether_clk",
+static struct clk macb_clk = {
+ .name = "macb_clk",
.pmc_mask = 1 << AT91SAM9260_ID_EMAC,
.type = CLK_TYPE_PERIPHERAL,
};
.pmc_mask = 1 << AT91SAM9260_ID_US5,
.type = CLK_TYPE_PERIPHERAL,
};
+static struct clk tc3_clk = {
+ .name = "tc3_clk",
+ .pmc_mask = 1 << AT91SAM9260_ID_TC3,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk tc4_clk = {
+ .name = "tc4_clk",
+ .pmc_mask = 1 << AT91SAM9260_ID_TC4,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk tc5_clk = {
+ .name = "tc5_clk",
+ .pmc_mask = 1 << AT91SAM9260_ID_TC5,
+ .type = CLK_TYPE_PERIPHERAL,
+};
static struct clk *periph_clocks[] __initdata = {
&pioA_clk,
&spi0_clk,
&spi1_clk,
// ssc
- // tc0 .. tc2
+ &tc0_clk,
+ &tc1_clk,
+ &tc2_clk,
&ohci_clk,
- ðer_clk,
+ &macb_clk,
&isi_clk,
&usart3_clk,
&usart4_clk,
&usart5_clk,
- // tc3 .. tc5
+ &tc3_clk,
+ &tc4_clk,
+ &tc5_clk,
// irq0 .. irq2
};
static void at91sam9260_reset(void)
{
- at91_sys_write(AT91_RSTC_CR, (0xA5 << 24) | AT91_RSTC_PROCRST | AT91_RSTC_PERRST);
+ at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST);
}
* AT91SAM9260 processor initialization
* -------------------------------------------------------------------- */
+static void __init at91sam9xe_initialize(void)
+{
+ unsigned long cidr, sram_size;
+
+ cidr = at91_sys_read(AT91_DBGU_CIDR);
+
+ switch (cidr & AT91_CIDR_SRAMSIZ) {
+ case AT91_CIDR_SRAMSIZ_32K:
+ sram_size = 2 * SZ_16K;
+ break;
+ case AT91_CIDR_SRAMSIZ_16K:
+ default:
+ sram_size = SZ_16K;
+ }
+
+ at91sam9xe_sram_desc->virtual = AT91_IO_VIRT_BASE - sram_size;
+ at91sam9xe_sram_desc->length = sram_size;
+
+ iotable_init(at91sam9xe_sram_desc, ARRAY_SIZE(at91sam9xe_sram_desc));
+}
+
void __init at91sam9260_initialize(unsigned long main_clock)
{
/* Map peripherals */
iotable_init(at91sam9260_io_desc, ARRAY_SIZE(at91sam9260_io_desc));
+ if (cpu_is_at91sam9xe())
+ at91sam9xe_initialize();
+ else
+ iotable_init(at91sam9260_sram_desc, ARRAY_SIZE(at91sam9260_sram_desc));
+
at91_arch_reset = at91sam9260_reset;
at91_extern_irq = (1 << AT91SAM9260_ID_IRQ0) | (1 << AT91SAM9260_ID_IRQ1)
| (1 << AT91SAM9260_ID_IRQ2);
/*
- * arch/arm/mach-at91rm9200/at91sam9260_devices.c
+ * arch/arm/mach-at91/at91sam9260_devices.c
*
* Copyright (C) 2006 Atmel
*
#if defined(CONFIG_MACB) || defined(CONFIG_MACB_MODULE)
static u64 eth_dmamask = 0xffffffffUL;
-static struct eth_platform_data eth_data;
+static struct at91_eth_data eth_data;
static struct resource eth_resources[] = {
[0] = {
.num_resources = ARRAY_SIZE(eth_resources),
};
-void __init at91_add_device_eth(struct eth_platform_data *data)
+void __init at91_add_device_eth(struct at91_eth_data *data)
{
if (!data)
return;
platform_device_register(&at91sam9260_eth_device);
}
#else
-void __init at91_add_device_eth(struct eth_platform_data *data) {}
+void __init at91_add_device_eth(struct at91_eth_data *data) {}
#endif
.num_resources = ARRAY_SIZE(mmc_resources),
};
-void __init at91_add_device_mmc(struct at91_mmc_data *data)
+void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data)
{
if (!data)
return;
platform_device_register(&at91sam9260_mmc_device);
}
#else
-void __init at91_add_device_mmc(struct at91_mmc_data *data) {}
+void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
#endif
void __init at91_init_leds(u8 cpu_led, u8 timer_led)
{
+ /* Enable GPIO to access the LEDs */
+ at91_set_gpio_output(cpu_led, 1);
+ at91_set_gpio_output(timer_led, 1);
+
at91_leds_cpu = cpu_led;
at91_leds_timer = timer_led;
}
/*
- * arch/arm/mach-at91rm9200/at91sam9261.c
+ * arch/arm/mach-at91/at91sam9261.c
*
* Copyright (C) 2005 SAN People
*
.pmc_mask = 1 << AT91SAM9261_ID_SPI1,
.type = CLK_TYPE_PERIPHERAL,
};
+static struct clk tc0_clk = {
+ .name = "tc0_clk",
+ .pmc_mask = 1 << AT91SAM9261_ID_TC0,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk tc1_clk = {
+ .name = "tc1_clk",
+ .pmc_mask = 1 << AT91SAM9261_ID_TC1,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk tc2_clk = {
+ .name = "tc2_clk",
+ .pmc_mask = 1 << AT91SAM9261_ID_TC2,
+ .type = CLK_TYPE_PERIPHERAL,
+};
static struct clk ohci_clk = {
.name = "ohci_clk",
.pmc_mask = 1 << AT91SAM9261_ID_UHP,
&spi0_clk,
&spi1_clk,
// ssc 0 .. ssc2
- // tc0 .. tc2
+ &tc0_clk,
+ &tc1_clk,
+ &tc2_clk,
&ohci_clk,
&lcdc_clk,
// irq0 .. irq2
static void at91sam9261_reset(void)
{
- at91_sys_write(AT91_RSTC_CR, (0xA5 << 24) | AT91_RSTC_PROCRST | AT91_RSTC_PERRST);
+ at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST);
}
/*
- * arch/arm/mach-at91rm9200/at91sam9261_devices.c
+ * arch/arm/mach-at91/at91sam9261_devices.c
*
* Copyright (C) 2005 Thibaut VARENE <varenet@parisc-linux.org>
* Copyright (C) 2005 David Brownell
.num_resources = ARRAY_SIZE(mmc_resources),
};
-void __init at91_add_device_mmc(struct at91_mmc_data *data)
+void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data)
{
if (!data)
return;
platform_device_register(&at91sam9261_mmc_device);
}
#else
-void __init at91_add_device_mmc(struct at91_mmc_data *data) {}
+void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
#endif
void __init at91_init_leds(u8 cpu_led, u8 timer_led)
{
+ /* Enable GPIO to access the LEDs */
+ at91_set_gpio_output(cpu_led, 1);
+ at91_set_gpio_output(timer_led, 1);
+
at91_leds_cpu = cpu_led;
at91_leds_timer = timer_led;
}
--- /dev/null
+/*
+ * arch/arm/mach-at91/at91sam9263.c
+ *
+ * Copyright (C) 2007 Atmel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#include <linux/module.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/arch/at91sam9263.h>
+#include <asm/arch/at91_pmc.h>
+#include <asm/arch/at91_rstc.h>
+
+#include "generic.h"
+#include "clock.h"
+
+static struct map_desc at91sam9263_io_desc[] __initdata = {
+ {
+ .virtual = AT91_VA_BASE_SYS,
+ .pfn = __phys_to_pfn(AT91_BASE_SYS),
+ .length = SZ_16K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = AT91_IO_VIRT_BASE - AT91SAM9263_SRAM0_SIZE,
+ .pfn = __phys_to_pfn(AT91SAM9263_SRAM0_BASE),
+ .length = AT91SAM9263_SRAM0_SIZE,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = AT91_IO_VIRT_BASE - AT91SAM9263_SRAM0_SIZE - AT91SAM9263_SRAM1_SIZE,
+ .pfn = __phys_to_pfn(AT91SAM9263_SRAM1_BASE),
+ .length = AT91SAM9263_SRAM1_SIZE,
+ .type = MT_DEVICE,
+ },
+};
+
+/* --------------------------------------------------------------------
+ * Clocks
+ * -------------------------------------------------------------------- */
+
+/*
+ * The peripheral clocks.
+ */
+static struct clk pioA_clk = {
+ .name = "pioA_clk",
+ .pmc_mask = 1 << AT91SAM9263_ID_PIOA,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk pioB_clk = {
+ .name = "pioB_clk",
+ .pmc_mask = 1 << AT91SAM9263_ID_PIOB,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk pioCDE_clk = {
+ .name = "pioCDE_clk",
+ .pmc_mask = 1 << AT91SAM9263_ID_PIOCDE,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart0_clk = {
+ .name = "usart0_clk",
+ .pmc_mask = 1 << AT91SAM9263_ID_US0,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart1_clk = {
+ .name = "usart1_clk",
+ .pmc_mask = 1 << AT91SAM9263_ID_US1,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart2_clk = {
+ .name = "usart2_clk",
+ .pmc_mask = 1 << AT91SAM9263_ID_US2,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk mmc0_clk = {
+ .name = "mci0_clk",
+ .pmc_mask = 1 << AT91SAM9263_ID_MCI0,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk mmc1_clk = {
+ .name = "mci1_clk",
+ .pmc_mask = 1 << AT91SAM9263_ID_MCI1,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk twi_clk = {
+ .name = "twi_clk",
+ .pmc_mask = 1 << AT91SAM9263_ID_TWI,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk spi0_clk = {
+ .name = "spi0_clk",
+ .pmc_mask = 1 << AT91SAM9263_ID_SPI0,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk spi1_clk = {
+ .name = "spi1_clk",
+ .pmc_mask = 1 << AT91SAM9263_ID_SPI1,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk tcb_clk = {
+ .name = "tcb_clk",
+ .pmc_mask = 1 << AT91SAM9263_ID_TCB,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk macb_clk = {
+ .name = "macb_clk",
+ .pmc_mask = 1 << AT91SAM9263_ID_EMAC,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk udc_clk = {
+ .name = "udc_clk",
+ .pmc_mask = 1 << AT91SAM9263_ID_UDP,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk isi_clk = {
+ .name = "isi_clk",
+ .pmc_mask = 1 << AT91SAM9263_ID_ISI,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk lcdc_clk = {
+ .name = "lcdc_clk",
+ .pmc_mask = 1 << AT91SAM9263_ID_ISI,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk ohci_clk = {
+ .name = "ohci_clk",
+ .pmc_mask = 1 << AT91SAM9263_ID_UHP,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+
+static struct clk *periph_clocks[] __initdata = {
+ &pioA_clk,
+ &pioB_clk,
+ &pioCDE_clk,
+ &usart0_clk,
+ &usart1_clk,
+ &usart2_clk,
+ &mmc0_clk,
+ &mmc1_clk,
+ // can
+ &twi_clk,
+ &spi0_clk,
+ &spi1_clk,
+ // ssc0 .. ssc1
+ // ac97
+ &tcb_clk,
+ // pwmc
+ &macb_clk,
+ // 2dge
+ &udc_clk,
+ &isi_clk,
+ &lcdc_clk,
+ // dma
+ &ohci_clk,
+ // irq0 .. irq1
+};
+
+/*
+ * The four programmable clocks.
+ * You must configure pin multiplexing to bring these signals out.
+ */
+static struct clk pck0 = {
+ .name = "pck0",
+ .pmc_mask = AT91_PMC_PCK0,
+ .type = CLK_TYPE_PROGRAMMABLE,
+ .id = 0,
+};
+static struct clk pck1 = {
+ .name = "pck1",
+ .pmc_mask = AT91_PMC_PCK1,
+ .type = CLK_TYPE_PROGRAMMABLE,
+ .id = 1,
+};
+static struct clk pck2 = {
+ .name = "pck2",
+ .pmc_mask = AT91_PMC_PCK2,
+ .type = CLK_TYPE_PROGRAMMABLE,
+ .id = 2,
+};
+static struct clk pck3 = {
+ .name = "pck3",
+ .pmc_mask = AT91_PMC_PCK3,
+ .type = CLK_TYPE_PROGRAMMABLE,
+ .id = 3,
+};
+
+static void __init at91sam9263_register_clocks(void)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
+ clk_register(periph_clocks[i]);
+
+ clk_register(&pck0);
+ clk_register(&pck1);
+ clk_register(&pck2);
+ clk_register(&pck3);
+}
+
+/* --------------------------------------------------------------------
+ * GPIO
+ * -------------------------------------------------------------------- */
+
+static struct at91_gpio_bank at91sam9263_gpio[] = {
+ {
+ .id = AT91SAM9263_ID_PIOA,
+ .offset = AT91_PIOA,
+ .clock = &pioA_clk,
+ }, {
+ .id = AT91SAM9263_ID_PIOB,
+ .offset = AT91_PIOB,
+ .clock = &pioB_clk,
+ }, {
+ .id = AT91SAM9263_ID_PIOCDE,
+ .offset = AT91_PIOC,
+ .clock = &pioCDE_clk,
+ }, {
+ .id = AT91SAM9263_ID_PIOCDE,
+ .offset = AT91_PIOD,
+ .clock = &pioCDE_clk,
+ }, {
+ .id = AT91SAM9263_ID_PIOCDE,
+ .offset = AT91_PIOE,
+ .clock = &pioCDE_clk,
+ }
+};
+
+static void at91sam9263_reset(void)
+{
+ at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST);
+}
+
+
+/* --------------------------------------------------------------------
+ * AT91SAM9263 processor initialization
+ * -------------------------------------------------------------------- */
+
+void __init at91sam9263_initialize(unsigned long main_clock)
+{
+ /* Map peripherals */
+ iotable_init(at91sam9263_io_desc, ARRAY_SIZE(at91sam9263_io_desc));
+
+ at91_arch_reset = at91sam9263_reset;
+ at91_extern_irq = (1 << AT91SAM9263_ID_IRQ0) | (1 << AT91SAM9263_ID_IRQ1);
+
+ /* Init clock subsystem */
+ at91_clock_init(main_clock);
+
+ /* Register the processor-specific clocks */
+ at91sam9263_register_clocks();
+
+ /* Register GPIO subsystem */
+ at91_gpio_init(at91sam9263_gpio, 5);
+}
+
+/* --------------------------------------------------------------------
+ * Interrupt initialization
+ * -------------------------------------------------------------------- */
+
+/*
+ * The default interrupt priority levels (0 = lowest, 7 = highest).
+ */
+static unsigned int at91sam9263_default_irq_priority[NR_AIC_IRQS] __initdata = {
+ 7, /* Advanced Interrupt Controller (FIQ) */
+ 7, /* System Peripherals */
+ 0, /* Parallel IO Controller A */
+ 0, /* Parallel IO Controller B */
+ 0, /* Parallel IO Controller C, D and E */
+ 0,
+ 0,
+ 6, /* USART 0 */
+ 6, /* USART 1 */
+ 6, /* USART 2 */
+ 0, /* Multimedia Card Interface 0 */
+ 0, /* Multimedia Card Interface 1 */
+ 4, /* CAN */
+ 0, /* Two-Wire Interface */
+ 6, /* Serial Peripheral Interface 0 */
+ 6, /* Serial Peripheral Interface 1 */
+ 5, /* Serial Synchronous Controller 0 */
+ 5, /* Serial Synchronous Controller 1 */
+ 6, /* AC97 Controller */
+ 0, /* Timer Counter 0, 1 and 2 */
+ 0, /* Pulse Width Modulation Controller */
+ 3, /* Ethernet */
+ 0,
+ 0, /* 2D Graphic Engine */
+ 3, /* USB Device Port */
+ 0, /* Image Sensor Interface */
+ 3, /* LDC Controller */
+ 0, /* DMA Controller */
+ 0,
+ 3, /* USB Host port */
+ 0, /* Advanced Interrupt Controller (IRQ0) */
+ 0, /* Advanced Interrupt Controller (IRQ1) */
+};
+
+void __init at91sam9263_init_interrupts(unsigned int priority[NR_AIC_IRQS])
+{
+ if (!priority)
+ priority = at91sam9263_default_irq_priority;
+
+ /* Initialize the AIC interrupt controller */
+ at91_aic_init(priority);
+
+ /* Enable GPIO interrupts */
+ at91_gpio_irq_setup();
+}
--- /dev/null
+/*
+ * arch/arm/mach-at91/at91sam9263_devices.c
+ *
+ * Copyright (C) 2007 Atmel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <linux/platform_device.h>
+
+#include <asm/arch/board.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/at91sam9263.h>
+#include <asm/arch/at91sam926x_mc.h>
+#include <asm/arch/at91sam9263_matrix.h>
+
+#include "generic.h"
+
+#define SZ_512 0x00000200
+#define SZ_256 0x00000100
+#define SZ_16 0x00000010
+
+/* --------------------------------------------------------------------
+ * USB Host
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+static u64 ohci_dmamask = 0xffffffffUL;
+static struct at91_usbh_data usbh_data;
+
+static struct resource usbh_resources[] = {
+ [0] = {
+ .start = AT91SAM9263_UHP_BASE,
+ .end = AT91SAM9263_UHP_BASE + SZ_1M - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9263_ID_UHP,
+ .end = AT91SAM9263_ID_UHP,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91_usbh_device = {
+ .name = "at91_ohci",
+ .id = -1,
+ .dev = {
+ .dma_mask = &ohci_dmamask,
+ .coherent_dma_mask = 0xffffffff,
+ .platform_data = &usbh_data,
+ },
+ .resource = usbh_resources,
+ .num_resources = ARRAY_SIZE(usbh_resources),
+};
+
+void __init at91_add_device_usbh(struct at91_usbh_data *data)
+{
+ int i;
+
+ if (!data)
+ return;
+
+ /* Enable VBus control for UHP ports */
+ for (i = 0; i < data->ports; i++) {
+ if (data->vbus_pin[i])
+ at91_set_gpio_output(data->vbus_pin[i], 0);
+ }
+
+ usbh_data = *data;
+ platform_device_register(&at91_usbh_device);
+}
+#else
+void __init at91_add_device_usbh(struct at91_usbh_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * USB Device (Gadget)
+ * -------------------------------------------------------------------- */
+
+#ifdef CONFIG_USB_GADGET_AT91
+static struct at91_udc_data udc_data;
+
+static struct resource udc_resources[] = {
+ [0] = {
+ .start = AT91SAM9263_BASE_UDP,
+ .end = AT91SAM9263_BASE_UDP + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9263_ID_UDP,
+ .end = AT91SAM9263_ID_UDP,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91_udc_device = {
+ .name = "at91_udc",
+ .id = -1,
+ .dev = {
+ .platform_data = &udc_data,
+ },
+ .resource = udc_resources,
+ .num_resources = ARRAY_SIZE(udc_resources),
+};
+
+void __init at91_add_device_udc(struct at91_udc_data *data)
+{
+ if (!data)
+ return;
+
+ if (data->vbus_pin) {
+ at91_set_gpio_input(data->vbus_pin, 0);
+ at91_set_deglitch(data->vbus_pin, 1);
+ }
+
+ /* Pullup pin is handled internally by USB device peripheral */
+
+ udc_data = *data;
+ platform_device_register(&at91_udc_device);
+}
+#else
+void __init at91_add_device_udc(struct at91_udc_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * Ethernet
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_MACB) || defined(CONFIG_MACB_MODULE)
+static u64 eth_dmamask = 0xffffffffUL;
+static struct at91_eth_data eth_data;
+
+static struct resource eth_resources[] = {
+ [0] = {
+ .start = AT91SAM9263_BASE_EMAC,
+ .end = AT91SAM9263_BASE_EMAC + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9263_ID_EMAC,
+ .end = AT91SAM9263_ID_EMAC,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91sam9263_eth_device = {
+ .name = "macb",
+ .id = -1,
+ .dev = {
+ .dma_mask = ð_dmamask,
+ .coherent_dma_mask = 0xffffffff,
+ .platform_data = ð_data,
+ },
+ .resource = eth_resources,
+ .num_resources = ARRAY_SIZE(eth_resources),
+};
+
+void __init at91_add_device_eth(struct at91_eth_data *data)
+{
+ if (!data)
+ return;
+
+ if (data->phy_irq_pin) {
+ at91_set_gpio_input(data->phy_irq_pin, 0);
+ at91_set_deglitch(data->phy_irq_pin, 1);
+ }
+
+ /* Pins used for MII and RMII */
+ at91_set_A_periph(AT91_PIN_PE21, 0); /* ETXCK_EREFCK */
+ at91_set_B_periph(AT91_PIN_PC25, 0); /* ERXDV */
+ at91_set_A_periph(AT91_PIN_PE25, 0); /* ERX0 */
+ at91_set_A_periph(AT91_PIN_PE26, 0); /* ERX1 */
+ at91_set_A_periph(AT91_PIN_PE27, 0); /* ERXER */
+ at91_set_A_periph(AT91_PIN_PE28, 0); /* ETXEN */
+ at91_set_A_periph(AT91_PIN_PE23, 0); /* ETX0 */
+ at91_set_A_periph(AT91_PIN_PE24, 0); /* ETX1 */
+ at91_set_A_periph(AT91_PIN_PE30, 0); /* EMDIO */
+ at91_set_A_periph(AT91_PIN_PE29, 0); /* EMDC */
+
+ if (!data->is_rmii) {
+ at91_set_A_periph(AT91_PIN_PE22, 0); /* ECRS */
+ at91_set_B_periph(AT91_PIN_PC26, 0); /* ECOL */
+ at91_set_B_periph(AT91_PIN_PC22, 0); /* ERX2 */
+ at91_set_B_periph(AT91_PIN_PC23, 0); /* ERX3 */
+ at91_set_B_periph(AT91_PIN_PC27, 0); /* ERXCK */
+ at91_set_B_periph(AT91_PIN_PC20, 0); /* ETX2 */
+ at91_set_B_periph(AT91_PIN_PC21, 0); /* ETX3 */
+ at91_set_B_periph(AT91_PIN_PC24, 0); /* ETXER */
+ }
+
+ eth_data = *data;
+ platform_device_register(&at91sam9263_eth_device);
+}
+#else
+void __init at91_add_device_eth(struct at91_eth_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * MMC / SD
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE)
+static u64 mmc_dmamask = 0xffffffffUL;
+static struct at91_mmc_data mmc0_data, mmc1_data;
+
+static struct resource mmc0_resources[] = {
+ [0] = {
+ .start = AT91SAM9263_BASE_MCI0,
+ .end = AT91SAM9263_BASE_MCI0 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9263_ID_MCI0,
+ .end = AT91SAM9263_ID_MCI0,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91sam9263_mmc0_device = {
+ .name = "at91_mci",
+ .id = 0,
+ .dev = {
+ .dma_mask = &mmc_dmamask,
+ .coherent_dma_mask = 0xffffffff,
+ .platform_data = &mmc0_data,
+ },
+ .resource = mmc0_resources,
+ .num_resources = ARRAY_SIZE(mmc0_resources),
+};
+
+static struct resource mmc1_resources[] = {
+ [0] = {
+ .start = AT91SAM9263_BASE_MCI1,
+ .end = AT91SAM9263_BASE_MCI1 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9263_ID_MCI1,
+ .end = AT91SAM9263_ID_MCI1,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91sam9263_mmc1_device = {
+ .name = "at91_mci",
+ .id = 1,
+ .dev = {
+ .dma_mask = &mmc_dmamask,
+ .coherent_dma_mask = 0xffffffff,
+ .platform_data = &mmc1_data,
+ },
+ .resource = mmc1_resources,
+ .num_resources = ARRAY_SIZE(mmc1_resources),
+};
+
+void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data)
+{
+ if (!data)
+ return;
+
+ /* input/irq */
+ if (data->det_pin) {
+ at91_set_gpio_input(data->det_pin, 1);
+ at91_set_deglitch(data->det_pin, 1);
+ }
+ if (data->wp_pin)
+ at91_set_gpio_input(data->wp_pin, 1);
+ if (data->vcc_pin)
+ at91_set_gpio_output(data->vcc_pin, 0);
+
+ if (mmc_id == 0) { /* MCI0 */
+ /* CLK */
+ at91_set_A_periph(AT91_PIN_PA12, 0);
+
+ if (data->slot_b) {
+ /* CMD */
+ at91_set_A_periph(AT91_PIN_PA16, 1);
+
+ /* DAT0, maybe DAT1..DAT3 */
+ at91_set_A_periph(AT91_PIN_PA17, 1);
+ if (data->wire4) {
+ at91_set_A_periph(AT91_PIN_PA18, 1);
+ at91_set_A_periph(AT91_PIN_PA19, 1);
+ at91_set_A_periph(AT91_PIN_PA20, 1);
+ }
+ } else {
+ /* CMD */
+ at91_set_A_periph(AT91_PIN_PA1, 1);
+
+ /* DAT0, maybe DAT1..DAT3 */
+ at91_set_A_periph(AT91_PIN_PA0, 1);
+ if (data->wire4) {
+ at91_set_A_periph(AT91_PIN_PA3, 1);
+ at91_set_A_periph(AT91_PIN_PA4, 1);
+ at91_set_A_periph(AT91_PIN_PA5, 1);
+ }
+ }
+
+ mmc0_data = *data;
+ at91_clock_associate("mci0_clk", &at91sam9263_mmc1_device.dev, "mci_clk");
+ platform_device_register(&at91sam9263_mmc0_device);
+ } else { /* MCI1 */
+ /* CLK */
+ at91_set_A_periph(AT91_PIN_PA6, 0);
+
+ if (data->slot_b) {
+ /* CMD */
+ at91_set_A_periph(AT91_PIN_PA21, 1);
+
+ /* DAT0, maybe DAT1..DAT3 */
+ at91_set_A_periph(AT91_PIN_PA22, 1);
+ if (data->wire4) {
+ at91_set_A_periph(AT91_PIN_PA23, 1);
+ at91_set_A_periph(AT91_PIN_PA24, 1);
+ at91_set_A_periph(AT91_PIN_PA25, 1);
+ }
+ } else {
+ /* CMD */
+ at91_set_A_periph(AT91_PIN_PA7, 1);
+
+ /* DAT0, maybe DAT1..DAT3 */
+ at91_set_A_periph(AT91_PIN_PA8, 1);
+ if (data->wire4) {
+ at91_set_A_periph(AT91_PIN_PA9, 1);
+ at91_set_A_periph(AT91_PIN_PA10, 1);
+ at91_set_A_periph(AT91_PIN_PA11, 1);
+ }
+ }
+
+ mmc1_data = *data;
+ at91_clock_associate("mci1_clk", &at91sam9263_mmc1_device.dev, "mci_clk");
+ platform_device_register(&at91sam9263_mmc1_device);
+ }
+}
+#else
+void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * NAND / SmartMedia
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_MTD_NAND_AT91) || defined(CONFIG_MTD_NAND_AT91_MODULE)
+static struct at91_nand_data nand_data;
+
+#define NAND_BASE AT91_CHIPSELECT_3
+
+static struct resource nand_resources[] = {
+ {
+ .start = NAND_BASE,
+ .end = NAND_BASE + SZ_256M - 1,
+ .flags = IORESOURCE_MEM,
+ }
+};
+
+static struct platform_device at91sam9263_nand_device = {
+ .name = "at91_nand",
+ .id = -1,
+ .dev = {
+ .platform_data = &nand_data,
+ },
+ .resource = nand_resources,
+ .num_resources = ARRAY_SIZE(nand_resources),
+};
+
+void __init at91_add_device_nand(struct at91_nand_data *data)
+{
+ unsigned long csa, mode;
+
+ if (!data)
+ return;
+
+ csa = at91_sys_read(AT91_MATRIX_EBI0CSA);
+ at91_sys_write(AT91_MATRIX_EBI0CSA, csa | AT91_MATRIX_EBI0_CS3A_SMC);
+
+ /* set the bus interface characteristics */
+ at91_sys_write(AT91_SMC_SETUP(3), AT91_SMC_NWESETUP_(0) | AT91_SMC_NCS_WRSETUP_(0)
+ | AT91_SMC_NRDSETUP_(0) | AT91_SMC_NCS_RDSETUP_(0));
+
+ at91_sys_write(AT91_SMC_PULSE(3), AT91_SMC_NWEPULSE_(3) | AT91_SMC_NCS_WRPULSE_(3)
+ | AT91_SMC_NRDPULSE_(3) | AT91_SMC_NCS_RDPULSE_(3));
+
+ at91_sys_write(AT91_SMC_CYCLE(3), AT91_SMC_NWECYCLE_(5) | AT91_SMC_NRDCYCLE_(5));
+
+ if (data->bus_width_16)
+ mode = AT91_SMC_DBW_16;
+ else
+ mode = AT91_SMC_DBW_8;
+ at91_sys_write(AT91_SMC_MODE(3), mode | AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_TDF_(2));
+
+ /* enable pin */
+ if (data->enable_pin)
+ at91_set_gpio_output(data->enable_pin, 1);
+
+ /* ready/busy pin */
+ if (data->rdy_pin)
+ at91_set_gpio_input(data->rdy_pin, 1);
+
+ /* card detect pin */
+ if (data->det_pin)
+ at91_set_gpio_input(data->det_pin, 1);
+
+ nand_data = *data;
+ platform_device_register(&at91sam9263_nand_device);
+}
+#else
+void __init at91_add_device_nand(struct at91_nand_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * TWI (i2c)
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE)
+
+static struct resource twi_resources[] = {
+ [0] = {
+ .start = AT91SAM9263_BASE_TWI,
+ .end = AT91SAM9263_BASE_TWI + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9263_ID_TWI,
+ .end = AT91SAM9263_ID_TWI,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91sam9263_twi_device = {
+ .name = "at91_i2c",
+ .id = -1,
+ .resource = twi_resources,
+ .num_resources = ARRAY_SIZE(twi_resources),
+};
+
+void __init at91_add_device_i2c(void)
+{
+ /* pins used for TWI interface */
+ at91_set_A_periph(AT91_PIN_PB4, 0); /* TWD */
+ at91_set_multi_drive(AT91_PIN_PB4, 1);
+
+ at91_set_A_periph(AT91_PIN_PB5, 0); /* TWCK */
+ at91_set_multi_drive(AT91_PIN_PB5, 1);
+
+ platform_device_register(&at91sam9263_twi_device);
+}
+#else
+void __init at91_add_device_i2c(void) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * SPI
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)
+static u64 spi_dmamask = 0xffffffffUL;
+
+static struct resource spi0_resources[] = {
+ [0] = {
+ .start = AT91SAM9263_BASE_SPI0,
+ .end = AT91SAM9263_BASE_SPI0 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9263_ID_SPI0,
+ .end = AT91SAM9263_ID_SPI0,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91sam9263_spi0_device = {
+ .name = "atmel_spi",
+ .id = 0,
+ .dev = {
+ .dma_mask = &spi_dmamask,
+ .coherent_dma_mask = 0xffffffff,
+ },
+ .resource = spi0_resources,
+ .num_resources = ARRAY_SIZE(spi0_resources),
+};
+
+static const unsigned spi0_standard_cs[4] = { AT91_PIN_PA5, AT91_PIN_PA3, AT91_PIN_PA4, AT91_PIN_PB11 };
+
+static struct resource spi1_resources[] = {
+ [0] = {
+ .start = AT91SAM9263_BASE_SPI1,
+ .end = AT91SAM9263_BASE_SPI1 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9263_ID_SPI1,
+ .end = AT91SAM9263_ID_SPI1,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91sam9263_spi1_device = {
+ .name = "atmel_spi",
+ .id = 1,
+ .dev = {
+ .dma_mask = &spi_dmamask,
+ .coherent_dma_mask = 0xffffffff,
+ },
+ .resource = spi1_resources,
+ .num_resources = ARRAY_SIZE(spi1_resources),
+};
+
+static const unsigned spi1_standard_cs[4] = { AT91_PIN_PB15, AT91_PIN_PB16, AT91_PIN_PB17, AT91_PIN_PB18 };
+
+void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
+{
+ int i;
+ unsigned long cs_pin;
+ short enable_spi0 = 0;
+ short enable_spi1 = 0;
+
+ /* Choose SPI chip-selects */
+ for (i = 0; i < nr_devices; i++) {
+ if (devices[i].controller_data)
+ cs_pin = (unsigned long) devices[i].controller_data;
+ else if (devices[i].bus_num == 0)
+ cs_pin = spi0_standard_cs[devices[i].chip_select];
+ else
+ cs_pin = spi1_standard_cs[devices[i].chip_select];
+
+ if (devices[i].bus_num == 0)
+ enable_spi0 = 1;
+ else
+ enable_spi1 = 1;
+
+ /* enable chip-select pin */
+ at91_set_gpio_output(cs_pin, 1);
+
+ /* pass chip-select pin to driver */
+ devices[i].controller_data = (void *) cs_pin;
+ }
+
+ spi_register_board_info(devices, nr_devices);
+
+ /* Configure SPI bus(es) */
+ if (enable_spi0) {
+ at91_set_B_periph(AT91_PIN_PA0, 0); /* SPI0_MISO */
+ at91_set_B_periph(AT91_PIN_PA1, 0); /* SPI0_MOSI */
+ at91_set_B_periph(AT91_PIN_PA2, 0); /* SPI1_SPCK */
+
+ at91_clock_associate("spi0_clk", &at91sam9263_spi0_device.dev, "spi_clk");
+ platform_device_register(&at91sam9263_spi0_device);
+ }
+ if (enable_spi1) {
+ at91_set_A_periph(AT91_PIN_PB12, 0); /* SPI1_MISO */
+ at91_set_A_periph(AT91_PIN_PB13, 0); /* SPI1_MOSI */
+ at91_set_A_periph(AT91_PIN_PB14, 0); /* SPI1_SPCK */
+
+ at91_clock_associate("spi1_clk", &at91sam9263_spi1_device.dev, "spi_clk");
+ platform_device_register(&at91sam9263_spi1_device);
+ }
+}
+#else
+void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * LEDs
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_LEDS)
+u8 at91_leds_cpu;
+u8 at91_leds_timer;
+
+void __init at91_init_leds(u8 cpu_led, u8 timer_led)
+{
+ /* Enable GPIO to access the LEDs */
+ at91_set_gpio_output(cpu_led, 1);
+ at91_set_gpio_output(timer_led, 1);
+
+ at91_leds_cpu = cpu_led;
+ at91_leds_timer = timer_led;
+}
+#else
+void __init at91_init_leds(u8 cpu_led, u8 timer_led) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * UART
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_SERIAL_ATMEL)
+
+static struct resource dbgu_resources[] = {
+ [0] = {
+ .start = AT91_VA_BASE_SYS + AT91_DBGU,
+ .end = AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91_ID_SYS,
+ .end = AT91_ID_SYS,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct atmel_uart_data dbgu_data = {
+ .use_dma_tx = 0,
+ .use_dma_rx = 0, /* DBGU not capable of receive DMA */
+ .regs = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
+};
+
+static struct platform_device at91sam9263_dbgu_device = {
+ .name = "atmel_usart",
+ .id = 0,
+ .dev = {
+ .platform_data = &dbgu_data,
+ .coherent_dma_mask = 0xffffffff,
+ },
+ .resource = dbgu_resources,
+ .num_resources = ARRAY_SIZE(dbgu_resources),
+};
+
+static inline void configure_dbgu_pins(void)
+{
+ at91_set_A_periph(AT91_PIN_PC30, 0); /* DRXD */
+ at91_set_A_periph(AT91_PIN_PC31, 1); /* DTXD */
+}
+
+static struct resource uart0_resources[] = {
+ [0] = {
+ .start = AT91SAM9263_BASE_US0,
+ .end = AT91SAM9263_BASE_US0 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9263_ID_US0,
+ .end = AT91SAM9263_ID_US0,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct atmel_uart_data uart0_data = {
+ .use_dma_tx = 1,
+ .use_dma_rx = 1,
+};
+
+static struct platform_device at91sam9263_uart0_device = {
+ .name = "atmel_usart",
+ .id = 1,
+ .dev = {
+ .platform_data = &uart0_data,
+ .coherent_dma_mask = 0xffffffff,
+ },
+ .resource = uart0_resources,
+ .num_resources = ARRAY_SIZE(uart0_resources),
+};
+
+static inline void configure_usart0_pins(void)
+{
+ at91_set_A_periph(AT91_PIN_PA26, 1); /* TXD0 */
+ at91_set_A_periph(AT91_PIN_PA27, 0); /* RXD0 */
+ at91_set_A_periph(AT91_PIN_PA28, 0); /* RTS0 */
+ at91_set_A_periph(AT91_PIN_PA29, 0); /* CTS0 */
+}
+
+static struct resource uart1_resources[] = {
+ [0] = {
+ .start = AT91SAM9263_BASE_US1,
+ .end = AT91SAM9263_BASE_US1 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9263_ID_US1,
+ .end = AT91SAM9263_ID_US1,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct atmel_uart_data uart1_data = {
+ .use_dma_tx = 1,
+ .use_dma_rx = 1,
+};
+
+static struct platform_device at91sam9263_uart1_device = {
+ .name = "atmel_usart",
+ .id = 2,
+ .dev = {
+ .platform_data = &uart1_data,
+ .coherent_dma_mask = 0xffffffff,
+ },
+ .resource = uart1_resources,
+ .num_resources = ARRAY_SIZE(uart1_resources),
+};
+
+static inline void configure_usart1_pins(void)
+{
+ at91_set_A_periph(AT91_PIN_PD0, 1); /* TXD1 */
+ at91_set_A_periph(AT91_PIN_PD1, 0); /* RXD1 */
+ at91_set_B_periph(AT91_PIN_PD7, 0); /* RTS1 */
+ at91_set_B_periph(AT91_PIN_PD8, 0); /* CTS1 */
+}
+
+static struct resource uart2_resources[] = {
+ [0] = {
+ .start = AT91SAM9263_BASE_US2,
+ .end = AT91SAM9263_BASE_US2 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9263_ID_US2,
+ .end = AT91SAM9263_ID_US2,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct atmel_uart_data uart2_data = {
+ .use_dma_tx = 1,
+ .use_dma_rx = 1,
+};
+
+static struct platform_device at91sam9263_uart2_device = {
+ .name = "atmel_usart",
+ .id = 3,
+ .dev = {
+ .platform_data = &uart2_data,
+ .coherent_dma_mask = 0xffffffff,
+ },
+ .resource = uart2_resources,
+ .num_resources = ARRAY_SIZE(uart2_resources),
+};
+
+static inline void configure_usart2_pins(void)
+{
+ at91_set_A_periph(AT91_PIN_PD2, 1); /* TXD2 */
+ at91_set_A_periph(AT91_PIN_PD3, 0); /* RXD2 */
+ at91_set_B_periph(AT91_PIN_PD5, 0); /* RTS2 */
+ at91_set_B_periph(AT91_PIN_PD6, 0); /* CTS2 */
+}
+
+struct platform_device *at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */
+struct platform_device *atmel_default_console_device; /* the serial console device */
+
+void __init at91_init_serial(struct at91_uart_config *config)
+{
+ int i;
+
+ /* Fill in list of supported UARTs */
+ for (i = 0; i < config->nr_tty; i++) {
+ switch (config->tty_map[i]) {
+ case 0:
+ configure_usart0_pins();
+ at91_uarts[i] = &at91sam9263_uart0_device;
+ at91_clock_associate("usart0_clk", &at91sam9263_uart0_device.dev, "usart");
+ break;
+ case 1:
+ configure_usart1_pins();
+ at91_uarts[i] = &at91sam9263_uart1_device;
+ at91_clock_associate("usart1_clk", &at91sam9263_uart1_device.dev, "usart");
+ break;
+ case 2:
+ configure_usart2_pins();
+ at91_uarts[i] = &at91sam9263_uart2_device;
+ at91_clock_associate("usart2_clk", &at91sam9263_uart2_device.dev, "usart");
+ break;
+ case 3:
+ configure_dbgu_pins();
+ at91_uarts[i] = &at91sam9263_dbgu_device;
+ at91_clock_associate("mck", &at91sam9263_dbgu_device.dev, "usart");
+ break;
+ default:
+ continue;
+ }
+ at91_uarts[i]->id = i; /* update ID number to mapped ID */
+ }
+
+ /* Set serial console device */
+ if (config->console_tty < ATMEL_MAX_UART)
+ atmel_default_console_device = at91_uarts[config->console_tty];
+ if (!atmel_default_console_device)
+ printk(KERN_INFO "AT91: No default serial console defined.\n");
+}
+
+void __init at91_add_device_serial(void)
+{
+ int i;
+
+ for (i = 0; i < ATMEL_MAX_UART; i++) {
+ if (at91_uarts[i])
+ platform_device_register(at91_uarts[i]);
+ }
+}
+#else
+void __init at91_init_serial(struct at91_uart_config *config) {}
+void __init at91_add_device_serial(void) {}
+#endif
+
+
+/* -------------------------------------------------------------------- */
+/*
+ * These devices are always present and don't need any board-specific
+ * setup.
+ */
+static int __init at91_add_standard_devices(void)
+{
+ return 0;
+}
+
+arch_initcall(at91_add_standard_devices);
/*
- * linux/arch/arm/mach-at91rm9200/at91sam926x_time.c
+ * linux/arch/arm/mach-at91/at91sam926x_time.c
*
* Copyright (C) 2005-2006 M. Amine SAYA, ATMEL Rousset, France
* Revision 2005 M. Nicolas Diremdjian, ATMEL Rousset, France
* Returns number of microseconds since last timer interrupt. Note that interrupts
* will have been disabled by do_gettimeofday()
* 'LATCH' is hwclock ticks (see CLOCK_TICK_RATE in timex.h) per jiffy.
- * 'tick' is usecs per jiffy (linux/timex.h).
*/
static unsigned long at91sam926x_gettimeoffset(void)
{
elapsed = (PIT_PICNT(t) * LATCH) + PIT_CPIV(t); /* hardware clock cycles */
- return (unsigned long)(elapsed * 1000000) / LATCH;
+ return (unsigned long)(elapsed * jiffies_to_usecs(1)) / LATCH;
}
/*
/*
- * linux/arch/arm/mach-at91rm9200/board-1arm.c
+ * linux/arch/arm/mach-at91/board-1arm.c
*
* Copyright (C) 2005 SAN People
*
/*
- * linux/arch/arm/mach-at91rm9200/board-carmeva.c
+ * linux/arch/arm/mach-at91/board-carmeva.c
*
* Copyright (c) 2005 Peer Georgi
* Conitec Datasystems
/* Compact Flash */
// at91_add_device_cf(&carmeva_cf_data);
/* MMC */
- at91_add_device_mmc(&carmeva_mmc_data);
+ at91_add_device_mmc(0, &carmeva_mmc_data);
}
MACHINE_START(CARMEVA, "Carmeva")
/*
- * linux/arch/arm/mach-at91rm9200/board-csb337.c
+ * linux/arch/arm/mach-at91/board-csb337.c
*
* Copyright (C) 2005 SAN People
*
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/spi/spi.h>
+#include <linux/mtd/physmap.h>
#include <asm/hardware.h>
#include <asm/setup.h>
},
};
+#define CSB_FLASH_BASE AT91_CHIPSELECT_0
+#define CSB_FLASH_SIZE 0x800000
+
+static struct mtd_partition csb_flash_partitions[] = {
+ {
+ .name = "uMON flash",
+ .offset = 0,
+ .size = MTDPART_SIZ_FULL,
+ .mask_flags = MTD_WRITEABLE, /* read only */
+ }
+};
+
+static struct physmap_flash_data csb_flash_data = {
+ .width = 2,
+ .parts = csb_flash_partitions,
+ .nr_parts = ARRAY_SIZE(csb_flash_partitions),
+};
+
+static struct resource csb_flash_resources[] = {
+ {
+ .start = CSB_FLASH_BASE,
+ .end = CSB_FLASH_BASE + CSB_FLASH_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ }
+};
+
+static struct platform_device csb_flash = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &csb_flash_data,
+ },
+ .resource = csb_flash_resources,
+ .num_resources = ARRAY_SIZE(csb_flash_resources),
+};
+
static void __init csb337_board_init(void)
{
/* Serial */
/* SPI */
at91_add_device_spi(csb337_spi_devices, ARRAY_SIZE(csb337_spi_devices));
/* MMC */
- at91_add_device_mmc(&csb337_mmc_data);
+ at91_add_device_mmc(0, &csb337_mmc_data);
+ /* NOR flash */
+ platform_device_register(&csb_flash);
}
MACHINE_START(CSB337, "Cogent CSB337")
/*
- * linux/arch/arm/mach-at91rm9200/board-csb637.c
+ * linux/arch/arm/mach-at91/board-csb637.c
*
* Copyright (C) 2005 SAN People
*
#include <linux/mm.h>
#include <linux/module.h>
#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
#include <asm/hardware.h>
#include <asm/setup.h>
.pullup_pin = AT91_PIN_PB1,
};
+#define CSB_FLASH_BASE AT91_CHIPSELECT_0
+#define CSB_FLASH_SIZE 0x1000000
+
+static struct mtd_partition csb_flash_partitions[] = {
+ {
+ .name = "uMON flash",
+ .offset = 0,
+ .size = MTDPART_SIZ_FULL,
+ .mask_flags = MTD_WRITEABLE, /* read only */
+ }
+};
+
+static struct physmap_flash_data csb_flash_data = {
+ .width = 2,
+ .parts = csb_flash_partitions,
+ .nr_parts = ARRAY_SIZE(csb_flash_partitions),
+};
+
+static struct resource csb_flash_resources[] = {
+ {
+ .start = CSB_FLASH_BASE,
+ .end = CSB_FLASH_BASE + CSB_FLASH_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ }
+};
+
+static struct platform_device csb_flash = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &csb_flash_data,
+ },
+ .resource = csb_flash_resources,
+ .num_resources = ARRAY_SIZE(csb_flash_resources),
+};
+
static void __init csb637_board_init(void)
{
/* Serial */
at91_add_device_i2c();
/* SPI */
at91_add_device_spi(NULL, 0);
+ /* NOR flash */
+ platform_device_register(&csb_flash);
}
MACHINE_START(CSB637, "Cogent CSB637")
/*
- * linux/arch/arm/mach-at91rm9200/board-dk.c
+ * linux/arch/arm/mach-at91/board-dk.c
*
* Copyright (C) 2005 SAN People
*
#else
/* MMC */
at91_set_gpio_output(AT91_PIN_PB7, 1); /* this MMC card slot can optionally use SPI signaling (CS3). */
- at91_add_device_mmc(&dk_mmc_data);
+ at91_add_device_mmc(0, &dk_mmc_data);
#endif
/* NAND */
at91_add_device_nand(&dk_nand_data);
/*
- * linux/arch/arm/mach-at91rm9200/board-eb9200.c
+ * linux/arch/arm/mach-at91/board-eb9200.c
*
* Copyright (C) 2005 SAN People, adapted for ATEB9200 from Embest
* by Andrew Patrikalakis
at91_add_device_spi(NULL, 0);
/* MMC */
/* only supports 1 or 4 bit interface, not wired through to SPI */
- at91_add_device_mmc(&eb9200_mmc_data);
+ at91_add_device_mmc(0, &eb9200_mmc_data);
}
MACHINE_START(ATEB9200, "Embest ATEB9200")
/*
- * linux/arch/arm/mach-at91rm9200/board-ek.c
+ * linux/arch/arm/mach-at91/board-ek.c
*
* Copyright (C) 2005 SAN People
*
#else
/* MMC */
at91_set_gpio_output(AT91_PIN_PB22, 1); /* this MMC card slot can optionally use SPI signaling (CS3). */
- at91_add_device_mmc(&ek_mmc_data);
+ at91_add_device_mmc(0, &ek_mmc_data);
#endif
/* NOR Flash */
platform_device_register(&ek_flash);
/*
- * linux/arch/arm/mach-at91rm9200/board-kafa.c
+ * linux/arch/arm/mach-at91/board-kafa.c
*
* Copyright (C) 2006 Sperry-Sun
*
/*
- * linux/arch/arm/mach-at91rm9200/board-kb9202.c
+ * linux/arch/arm/mach-at91/board-kb9202.c
*
* Copyright (c) 2005 kb_admin
* KwikByte, Inc.
/* USB Device */
at91_add_device_udc(&kb9202_udc_data);
/* MMC */
- at91_add_device_mmc(&kb9202_mmc_data);
+ at91_add_device_mmc(0, &kb9202_mmc_data);
/* I2C */
at91_add_device_i2c();
/* SPI */
/*
- * linux/arch/arm/mach-at91rm9200/board-ek.c
+ * linux/arch/arm/mach-at91/board-sam9260ek.c
*
* Copyright (C) 2005 SAN People
* Copyright (C) 2006 Atmel
/*
* MACB Ethernet device
*/
-static struct __initdata eth_platform_data ek_macb_data = {
+static struct __initdata at91_eth_data ek_macb_data = {
.phy_irq_pin = AT91_PIN_PA7,
.is_rmii = 1,
};
/* Ethernet */
at91_add_device_eth(&ek_macb_data);
/* MMC */
- at91_add_device_mmc(&ek_mmc_data);
+ at91_add_device_mmc(0, &ek_mmc_data);
}
MACHINE_START(AT91SAM9260EK, "Atmel AT91SAM9260-EK")
/*
- * linux/arch/arm/mach-at91rm9200/board-ek.c
+ * linux/arch/arm/mach-at91/board-sam9261ek.c
*
* Copyright (C) 2005 SAN People
* Copyright (C) 2006 Atmel
at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
#else
/* MMC */
- at91_add_device_mmc(&ek_mmc_data);
+ at91_add_device_mmc(0, &ek_mmc_data);
#endif
}
--- /dev/null
+/*
+ * linux/arch/arm/mach-at91/board-sam9263ek.c
+ *
+ * Copyright (C) 2005 SAN People
+ * Copyright (C) 2007 Atmel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+
+#include <asm/hardware.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/arch/board.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/at91sam926x_mc.h>
+
+#include "generic.h"
+
+
+/*
+ * Serial port configuration.
+ * 0 .. 2 = USART0 .. USART2
+ * 3 = DBGU
+ */
+static struct at91_uart_config __initdata ek_uart_config = {
+ .console_tty = 0, /* ttyS0 */
+ .nr_tty = 2,
+ .tty_map = { 3, 0, -1, -1, } /* ttyS0, ..., ttyS3 */
+};
+
+static void __init ek_map_io(void)
+{
+ /* Initialize processor: 16.367 MHz crystal */
+ at91sam9263_initialize(16367660);
+
+ /* Setup the serial ports and console */
+ at91_init_serial(&ek_uart_config);
+}
+
+static void __init ek_init_irq(void)
+{
+ at91sam9263_init_interrupts(NULL);
+}
+
+
+/*
+ * USB Host port
+ */
+static struct at91_usbh_data __initdata ek_usbh_data = {
+ .ports = 2,
+ .vbus_pin = { AT91_PIN_PA24, AT91_PIN_PA21 },
+};
+
+/*
+ * USB Device port
+ */
+static struct at91_udc_data __initdata ek_udc_data = {
+ .vbus_pin = AT91_PIN_PA25,
+ .pullup_pin = 0, /* pull-up driven by UDC */
+};
+
+
+/*
+ * SPI devices.
+ */
+static struct spi_board_info ek_spi_devices[] = {
+#if defined(CONFIG_MTD_AT91_DATAFLASH_CARD)
+ { /* DataFlash card */
+ .modalias = "mtd_dataflash",
+ .chip_select = 0,
+ .max_speed_hz = 15 * 1000 * 1000,
+ .bus_num = 0,
+ },
+#endif
+};
+
+
+/*
+ * MCI (SD/MMC)
+ */
+static struct at91_mmc_data __initdata ek_mmc_data = {
+ .wire4 = 1,
+ .det_pin = AT91_PIN_PE18,
+ .wp_pin = AT91_PIN_PE19,
+// .vcc_pin = ... not connected
+};
+
+
+/*
+ * NAND flash
+ */
+static struct mtd_partition __initdata ek_nand_partition[] = {
+ {
+ .name = "Partition 1",
+ .offset = 0,
+ .size = 64 * 1024 * 1024,
+ },
+ {
+ .name = "Partition 2",
+ .offset = 64 * 1024 * 1024,
+ .size = MTDPART_SIZ_FULL,
+ },
+};
+
+static struct mtd_partition *nand_partitions(int size, int *num_partitions)
+{
+ *num_partitions = ARRAY_SIZE(ek_nand_partition);
+ return ek_nand_partition;
+}
+
+static struct at91_nand_data __initdata ek_nand_data = {
+ .ale = 21,
+ .cle = 22,
+// .det_pin = ... not connected
+ .rdy_pin = AT91_PIN_PA22,
+ .enable_pin = AT91_PIN_PD15,
+ .partition_info = nand_partitions,
+#if defined(CONFIG_MTD_NAND_AT91_BUSWIDTH_16)
+ .bus_width_16 = 1,
+#else
+ .bus_width_16 = 0,
+#endif
+};
+
+
+static void __init ek_board_init(void)
+{
+ /* Serial */
+ at91_add_device_serial();
+ /* USB Host */
+ at91_add_device_usbh(&ek_usbh_data);
+ /* USB Device */
+ at91_add_device_udc(&ek_udc_data);
+ /* SPI */
+ at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
+ /* MMC */
+ at91_add_device_mmc(1, &ek_mmc_data);
+ /* NAND */
+ at91_add_device_nand(&ek_nand_data);
+}
+
+MACHINE_START(AT91SAM9263EK, "Atmel AT91SAM9263-EK")
+ /* Maintainer: Atmel */
+ .phys_io = AT91_BASE_SYS,
+ .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
+ .boot_params = AT91_SDRAM_BASE + 0x100,
+ .timer = &at91sam926x_timer,
+ .map_io = ek_map_io,
+ .init_irq = ek_init_irq,
+ .init_machine = ek_board_init,
+MACHINE_END
/*
- * linux/arch/arm/mach-at91rm9200/clock.c
+ * linux/arch/arm/mach-at91/clock.c
*
* Copyright (C) 2005 David Brownell
* Copyright (C) 2005 Ivan Kokshaysky
return 0;
}
-/*
- * Several unused clocks may be active. Turn them off.
- */
-static void __init at91_periphclk_reset(void)
-{
- unsigned long reg;
- struct clk *clk;
-
- reg = at91_sys_read(AT91_PMC_PCSR);
-
- list_for_each_entry(clk, &clocks, node) {
- if (clk->mode != pmc_periph_mode)
- continue;
-
- if (clk->users > 0)
- reg &= ~clk->pmc_mask;
- }
-
- at91_sys_write(AT91_PMC_PCDR, reg);
-}
-
static struct clk *const standard_pmc_clocks[] __initdata = {
/* four primary clocks */
&clk32k,
pr_info("Clocks: PLLA overclocked, %ld MHz\n", plla.rate_hz / 1000000);
/*
- * USB clock init: choose 48 MHz PLLB value, turn all clocks off,
+ * USB clock init: choose 48 MHz PLLB value,
* disable 48MHz clock during usb peripheral suspend.
*
* REVISIT: assumes MCK doesn't derive from PLLB!
if (cpu_is_at91rm9200()) {
uhpck.pmc_mask = AT91RM9200_PMC_UHP;
udpck.pmc_mask = AT91RM9200_PMC_UDP;
- at91_sys_write(AT91_PMC_SCDR, AT91RM9200_PMC_UHP | AT91RM9200_PMC_UDP);
at91_sys_write(AT91_PMC_SCER, AT91RM9200_PMC_MCKUDP);
- } else if (cpu_is_at91sam9260()) {
+ } else if (cpu_is_at91sam9260() || cpu_is_at91sam9261() || cpu_is_at91sam9263()) {
uhpck.pmc_mask = AT91SAM926x_PMC_UHP;
udpck.pmc_mask = AT91SAM926x_PMC_UDP;
- at91_sys_write(AT91_PMC_SCDR, AT91SAM926x_PMC_UHP | AT91SAM926x_PMC_UDP);
- } else if (cpu_is_at91sam9261()) {
- uhpck.pmc_mask = (AT91SAM926x_PMC_UHP | AT91_PMC_HCK0);
- udpck.pmc_mask = AT91SAM926x_PMC_UDP;
- at91_sys_write(AT91_PMC_SCDR, AT91SAM926x_PMC_UHP | AT91_PMC_HCK0 | AT91SAM926x_PMC_UDP);
}
at91_sys_write(AT91_CKGR_PLLBR, 0);
(unsigned) main_clock / 1000000,
((unsigned) main_clock % 1000000) / 1000);
- /* disable all programmable clocks */
- at91_sys_write(AT91_PMC_SCDR, AT91_PMC_PCK0 | AT91_PMC_PCK1 | AT91_PMC_PCK2 | AT91_PMC_PCK3);
+ return 0;
+}
+
+/*
+ * Several unused clocks may be active. Turn them off.
+ */
+static int __init at91_clock_reset(void)
+{
+ unsigned long pcdr = 0;
+ unsigned long scdr = 0;
+ struct clk *clk;
+
+ list_for_each_entry(clk, &clocks, node) {
+ if (clk->users > 0)
+ continue;
+
+ if (clk->mode == pmc_periph_mode)
+ pcdr |= clk->pmc_mask;
+
+ if (clk->mode == pmc_sys_mode)
+ scdr |= clk->pmc_mask;
+
+ pr_debug("Clocks: disable unused %s\n", clk->name);
+ }
- /* disable all other unused peripheral clocks */
- at91_periphclk_reset();
+ at91_sys_write(AT91_PMC_PCDR, pcdr);
+ at91_sys_write(AT91_PMC_SCDR, scdr);
return 0;
}
+late_initcall(at91_clock_reset);
/*
- * linux/arch/arm/mach-at91rm9200/clock.h
+ * linux/arch/arm/mach-at91/clock.h
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
/*
- * linux/arch/arm/mach-at91rm9200/generic.h
+ * linux/arch/arm/mach-at91/generic.h
*
* Copyright (C) 2005 David Brownell
*
extern void __init at91rm9200_initialize(unsigned long main_clock, unsigned short banks);
extern void __init at91sam9260_initialize(unsigned long main_clock);
extern void __init at91sam9261_initialize(unsigned long main_clock);
+extern void __init at91sam9263_initialize(unsigned long main_clock);
/* Interrupts */
extern void __init at91rm9200_init_interrupts(unsigned int priority[]);
extern void __init at91sam9260_init_interrupts(unsigned int priority[]);
extern void __init at91sam9261_init_interrupts(unsigned int priority[]);
+extern void __init at91sam9263_init_interrupts(unsigned int priority[]);
extern void __init at91_aic_init(unsigned int priority[]);
/* Timer */
/*
- * linux/arch/arm/mach-at91rm9200/gpio.c
+ * linux/arch/arm/mach-at91/gpio.c
*
* Copyright (C) 2005 HP Labs
*
/*
- * linux/arch/arm/mach-at91rm9200/irq.c
+ * linux/arch/arm/mach-at91/irq.c
*
* Copyright (C) 2004 SAN People
* Copyright (C) 2004 ATMEL
if (!at91_leds_timer || !at91_leds_cpu)
return -ENODEV;
- /* Enable PIO to access the LEDs */
- at91_set_gpio_output(at91_leds_timer, 1);
- at91_set_gpio_output(at91_leds_cpu, 1);
-
leds_event = at91_leds_event;
leds_event(led_start);
/*
- * arch/arm/mach-at91rm9200/pm.c
+ * arch/arm/mach-at91/pm.c
* AT91 Power Management
*
* Copyright (C) 2005 David Brownell
#warning "Check SAM9260 USB clocks"
} else if (cpu_is_at91sam9261()) {
#warning "Check SAM9261 USB clocks"
+ } else if (cpu_is_at91sam9263()) {
+#warning "Check SAM9263 USB clocks"
}
#ifdef CONFIG_AT91_PROGRAMMABLE_CLOCKS
Say 'Y' here if you want your kernel to support the Glomation
GESBC-9312-sx board.
+config MACH_MICRO9
+ bool
+ default n
+
+config MACH_MICRO9H
+ bool "Support Contec Hypercontrol Micro9-H"
+ select MACH_MICRO9
+ help
+ Say 'Y' here if you want your kernel to support the
+ Contec Hypercontrol Micro9-H board.
+
+config MACH_MICRO9M
+ bool "Support Contec Hypercontrol Micro9-M"
+ select MACH_MICRO9
+ help
+ Say 'Y' here if you want your kernel to support the
+ Contec Hypercontrol Micro9-M board.
+
+config MACH_MICRO9L
+ bool "Support Contec Hypercontrol Micro9-L"
+ select MACH_MICRO9
+ help
+ Say 'Y' here if you want your kernel to support the
+ Contec Hypercontrol Micro9-L board.
+
config MACH_TS72XX
bool "Support Technologic Systems TS-72xx SBC"
help
obj-$(CONFIG_MACH_EDB9315) += edb9315.o
obj-$(CONFIG_MACH_EDB9315A) += edb9315a.o
obj-$(CONFIG_MACH_GESBC9312) += gesbc9312.o
+obj-$(CONFIG_MACH_MICRO9) += micro9.o
obj-$(CONFIG_MACH_TS72XX) += ts72xx.o
#include <linux/kernel.h>
#include <linux/clk.h>
#include <linux/err.h>
+#include <linux/module.h>
#include <linux/string.h>
#include <asm/div64.h>
#include <asm/hardware.h>
return (unsigned long)rate;
}
-void ep93xx_clock_init(void)
+static int __init ep93xx_clock_init(void)
{
u32 value;
printk(KERN_INFO "ep93xx: FCLK %ld MHz, HCLK %ld MHz, PCLK %ld MHz\n",
clk_f.rate / 1000000, clk_h.rate / 1000000,
clk_p.rate / 1000000);
+
+ return 0;
}
+arch_initcall(ep93xx_clock_init);
/*************************************************************************
* GPIO handling for EP93xx
*************************************************************************/
-static unsigned char gpio_int_enable[2];
-static unsigned char gpio_int_type1[2];
-static unsigned char gpio_int_type2[2];
+static unsigned char gpio_int_unmasked[3];
+static unsigned char gpio_int_enabled[3];
+static unsigned char gpio_int_type1[3];
+static unsigned char gpio_int_type2[3];
-static void update_gpio_ab_int_params(int port)
+static void update_gpio_int_params(int abf)
{
- if (port == 0) {
+ if (abf == 0) {
__raw_writeb(0, EP93XX_GPIO_A_INT_ENABLE);
__raw_writeb(gpio_int_type2[0], EP93XX_GPIO_A_INT_TYPE2);
__raw_writeb(gpio_int_type1[0], EP93XX_GPIO_A_INT_TYPE1);
- __raw_writeb(gpio_int_enable[0], EP93XX_GPIO_A_INT_ENABLE);
- } else if (port == 1) {
+ __raw_writeb(gpio_int_unmasked[0] & gpio_int_enabled[0], EP93XX_GPIO_A_INT_ENABLE);
+ } else if (abf == 1) {
__raw_writeb(0, EP93XX_GPIO_B_INT_ENABLE);
__raw_writeb(gpio_int_type2[1], EP93XX_GPIO_B_INT_TYPE2);
__raw_writeb(gpio_int_type1[1], EP93XX_GPIO_B_INT_TYPE1);
- __raw_writeb(gpio_int_enable[1], EP93XX_GPIO_B_INT_ENABLE);
+ __raw_writeb(gpio_int_unmasked[1] & gpio_int_enabled[1], EP93XX_GPIO_B_INT_ENABLE);
+ } else if (abf == 2) {
+ __raw_writeb(0, EP93XX_GPIO_F_INT_ENABLE);
+ __raw_writeb(gpio_int_type2[2], EP93XX_GPIO_F_INT_TYPE2);
+ __raw_writeb(gpio_int_type1[2], EP93XX_GPIO_F_INT_TYPE1);
+ __raw_writeb(gpio_int_unmasked[2] & gpio_int_enabled[2], EP93XX_GPIO_F_INT_ENABLE);
+ } else {
+ BUG();
}
}
local_irq_save(flags);
if (direction == GPIO_OUT) {
if (line >= 0 && line < 16) {
- gpio_int_enable[line >> 3] &= ~(1 << (line & 7));
- update_gpio_ab_int_params(line >> 3);
+ /* Port A/B. */
+ gpio_int_unmasked[line >> 3] &= ~(1 << (line & 7));
+ update_gpio_int_params(line >> 3);
+ } else if (line >= 40 && line < 48) {
+ /* Port F. */
+ gpio_int_unmasked[2] &= ~(1 << (line & 7));
+ update_gpio_int_params(2);
}
v = __raw_readb(data_direction_register);
/*************************************************************************
* EP93xx IRQ handling
*************************************************************************/
-static void ep93xx_gpio_ab_irq_handler(unsigned int irq,
- struct irq_desc *desc)
+static void ep93xx_gpio_ab_irq_handler(unsigned int irq, struct irq_desc *desc)
{
unsigned char status;
int i;
}
}
-static void ep93xx_gpio_ab_irq_mask_ack(unsigned int irq)
+static void ep93xx_gpio_f_irq_handler(unsigned int irq, struct irq_desc *desc)
+{
+ int gpio_irq = IRQ_EP93XX_GPIO(16) + (((irq + 1) & 7) ^ 4);
+
+ desc_handle_irq(gpio_irq, irq_desc + gpio_irq);
+}
+
+static void ep93xx_gpio_irq_mask_ack(unsigned int irq)
{
int line = irq - IRQ_EP93XX_GPIO(0);
int port = line >> 3;
- gpio_int_enable[port] &= ~(1 << (line & 7));
- update_gpio_ab_int_params(port);
+ gpio_int_unmasked[port] &= ~(1 << (line & 7));
+ update_gpio_int_params(port);
- if (line >> 3) {
- __raw_writel(1 << (line & 7), EP93XX_GPIO_B_INT_ACK);
- } else {
+ if (port == 0) {
__raw_writel(1 << (line & 7), EP93XX_GPIO_A_INT_ACK);
+ } else if (port == 1) {
+ __raw_writel(1 << (line & 7), EP93XX_GPIO_B_INT_ACK);
+ } else if (port == 2) {
+ __raw_writel(1 << (line & 7), EP93XX_GPIO_F_INT_ACK);
}
}
-static void ep93xx_gpio_ab_irq_mask(unsigned int irq)
+static void ep93xx_gpio_irq_mask(unsigned int irq)
{
int line = irq - IRQ_EP93XX_GPIO(0);
int port = line >> 3;
- gpio_int_enable[port] &= ~(1 << (line & 7));
- update_gpio_ab_int_params(port);
+ gpio_int_unmasked[port] &= ~(1 << (line & 7));
+ update_gpio_int_params(port);
}
-static void ep93xx_gpio_ab_irq_unmask(unsigned int irq)
+static void ep93xx_gpio_irq_unmask(unsigned int irq)
{
int line = irq - IRQ_EP93XX_GPIO(0);
int port = line >> 3;
- gpio_int_enable[port] |= 1 << (line & 7);
- update_gpio_ab_int_params(port);
+ gpio_int_unmasked[port] |= 1 << (line & 7);
+ update_gpio_int_params(port);
}
* edge (1) triggered, while gpio_int_type2 controls whether it
* triggers on low/falling (0) or high/rising (1).
*/
-static int ep93xx_gpio_ab_irq_type(unsigned int irq, unsigned int type)
+static int ep93xx_gpio_irq_type(unsigned int irq, unsigned int type)
{
int port;
int line;
line = irq - IRQ_EP93XX_GPIO(0);
- gpio_line_config(line, GPIO_IN);
+ if (line >= 0 && line < 16) {
+ gpio_line_config(line, GPIO_IN);
+ } else {
+ gpio_line_config(EP93XX_GPIO_LINE_F(line), GPIO_IN);
+ }
port = line >> 3;
line &= 7;
if (type & IRQT_RISING) {
+ gpio_int_enabled[port] |= 1 << line;
gpio_int_type1[port] |= 1 << line;
gpio_int_type2[port] |= 1 << line;
} else if (type & IRQT_FALLING) {
+ gpio_int_enabled[port] |= 1 << line;
gpio_int_type1[port] |= 1 << line;
gpio_int_type2[port] &= ~(1 << line);
} else if (type & IRQT_HIGH) {
+ gpio_int_enabled[port] |= 1 << line;
gpio_int_type1[port] &= ~(1 << line);
gpio_int_type2[port] |= 1 << line;
} else if (type & IRQT_LOW) {
+ gpio_int_enabled[port] |= 1 << line;
gpio_int_type1[port] &= ~(1 << line);
gpio_int_type2[port] &= ~(1 << line);
+ } else {
+ gpio_int_enabled[port] &= ~(1 << line);
}
- update_gpio_ab_int_params(port);
+ update_gpio_int_params(port);
return 0;
}
-static struct irq_chip ep93xx_gpio_ab_irq_chip = {
- .ack = ep93xx_gpio_ab_irq_mask_ack,
- .mask = ep93xx_gpio_ab_irq_mask,
- .unmask = ep93xx_gpio_ab_irq_unmask,
- .set_type = ep93xx_gpio_ab_irq_type,
+static struct irq_chip ep93xx_gpio_irq_chip = {
+ .name = "GPIO",
+ .ack = ep93xx_gpio_irq_mask_ack,
+ .mask = ep93xx_gpio_irq_mask,
+ .unmask = ep93xx_gpio_irq_unmask,
+ .set_type = ep93xx_gpio_irq_type,
};
vic_init((void *)EP93XX_VIC1_BASE, 0, EP93XX_VIC1_VALID_IRQ_MASK);
vic_init((void *)EP93XX_VIC2_BASE, 32, EP93XX_VIC2_VALID_IRQ_MASK);
- for (irq = IRQ_EP93XX_GPIO(0) ; irq <= IRQ_EP93XX_GPIO(15); irq++) {
- set_irq_chip(irq, &ep93xx_gpio_ab_irq_chip);
+ for (irq = IRQ_EP93XX_GPIO(0); irq <= IRQ_EP93XX_GPIO(23); irq++) {
+ set_irq_chip(irq, &ep93xx_gpio_irq_chip);
set_irq_handler(irq, handle_level_irq);
set_irq_flags(irq, IRQF_VALID);
}
+
set_irq_chained_handler(IRQ_EP93XX_GPIO_AB, ep93xx_gpio_ab_irq_handler);
+ set_irq_chained_handler(IRQ_EP93XX_GPIO0MUX, ep93xx_gpio_f_irq_handler);
+ set_irq_chained_handler(IRQ_EP93XX_GPIO1MUX, ep93xx_gpio_f_irq_handler);
+ set_irq_chained_handler(IRQ_EP93XX_GPIO2MUX, ep93xx_gpio_f_irq_handler);
+ set_irq_chained_handler(IRQ_EP93XX_GPIO3MUX, ep93xx_gpio_f_irq_handler);
+ set_irq_chained_handler(IRQ_EP93XX_GPIO4MUX, ep93xx_gpio_f_irq_handler);
+ set_irq_chained_handler(IRQ_EP93XX_GPIO5MUX, ep93xx_gpio_f_irq_handler);
+ set_irq_chained_handler(IRQ_EP93XX_GPIO6MUX, ep93xx_gpio_f_irq_handler);
+ set_irq_chained_handler(IRQ_EP93XX_GPIO7MUX, ep93xx_gpio_f_irq_handler);
}
{
unsigned int v;
- ep93xx_clock_init();
-
/*
* Disallow access to MaverickCrunch initially.
*/
platform_device_register(&ep93xx_rtc_device);
platform_device_register(&ep93xx_ohci_device);
-
-#ifdef CONFIG_CRUNCH
- elf_hwcap |= HWCAP_CRUNCH;
-#endif
}
--- /dev/null
+/*
+ * linux/arch/arm/mach-ep93xx/micro9.c
+ *
+ * Copyright (C) 2006 Contec Steuerungstechnik & Automation GmbH
+ * Manfred Gruber <manfred.gruber@contec.at>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/platform_device.h>
+#include <linux/sched.h>
+
+#include <linux/mtd/physmap.h>
+
+#include <asm/io.h>
+#include <asm/hardware.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach-types.h>
+
+static struct ep93xx_eth_data micro9_eth_data = {
+ .phy_id = 0x1f,
+};
+
+static struct resource micro9_eth_resource[] = {
+ {
+ .start = EP93XX_ETHERNET_PHYS_BASE,
+ .end = EP93XX_ETHERNET_PHYS_BASE + 0xffff,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = IRQ_EP93XX_ETHERNET,
+ .end = IRQ_EP93XX_ETHERNET,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+static struct platform_device micro9_eth_device = {
+ .name = "ep93xx-eth",
+ .id = -1,
+ .dev = {
+ .platform_data = µ9_eth_data,
+ },
+ .num_resources = ARRAY_SIZE(micro9_eth_resource),
+ .resource = micro9_eth_resource,
+};
+
+static void __init micro9_eth_init(void)
+{
+ memcpy(micro9_eth_data.dev_addr,
+ (void *)(EP93XX_ETHERNET_BASE + 0x50), 6);
+ platform_device_register(µ9_eth_device);
+}
+
+static void __init micro9_init(void)
+{
+ micro9_eth_init();
+}
+
+/*
+ * Micro9-H
+ */
+#ifdef CONFIG_MACH_MICRO9H
+static struct physmap_flash_data micro9h_flash_data = {
+ .width = 4,
+};
+
+static struct resource micro9h_flash_resource = {
+ .start = 0x10000000,
+ .end = 0x13ffffff,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device micro9h_flash = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = µ9h_flash_data,
+ },
+ .num_resources = 1,
+ .resource = µ9h_flash_resource,
+};
+
+static void __init micro9h_init(void)
+{
+ platform_device_register(µ9h_flash);
+}
+
+static void __init micro9h_init_machine(void)
+{
+ ep93xx_init_devices();
+ micro9_init();
+ micro9h_init();
+}
+
+MACHINE_START(MICRO9, "Contec Hypercontrol Micro9-H")
+ /* Maintainer: Manfred Gruber <manfred.gruber@contec.at> */
+ .phys_io = EP93XX_APB_PHYS_BASE,
+ .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
+ .boot_params = 0x00000100,
+ .map_io = ep93xx_map_io,
+ .init_irq = ep93xx_init_irq,
+ .timer = &ep93xx_timer,
+ .init_machine = micro9h_init_machine,
+MACHINE_END
+#endif
+
+/*
+ * Micro9-M
+ */
+#ifdef CONFIG_MACH_MICRO9M
+static void __init micro9m_init_machine(void)
+{
+ ep93xx_init_devices();
+ micro9_init();
+}
+
+MACHINE_START(MICRO9M, "Contec Hypercontrol Micro9-M")
+ /* Maintainer: Manfred Gruber <manfred.gruber@contec.at> */
+ .phys_io = EP93XX_APB_PHYS_BASE,
+ .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
+ .boot_params = 0x00000100,
+ .map_io = ep93xx_map_io,
+ .init_irq = ep93xx_init_irq,
+ .timer = &ep93xx_timer,
+ .init_machine = micro9m_init_machine,
+MACHINE_END
+#endif
+
+/*
+ * Micro9-L
+ */
+#ifdef CONFIG_MACH_MICRO9L
+static void __init micro9l_init_machine(void)
+{
+ ep93xx_init_devices();
+ micro9_init();
+}
+
+MACHINE_START(MICRO9L, "Contec Hypercontrol Micro9-L")
+ /* Maintainer: Manfred Gruber <manfred.gruber@contec.at> */
+ .phys_io = EP93XX_APB_PHYS_BASE,
+ .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
+ .boot_params = 0x00000100,
+ .map_io = ep93xx_map_io,
+ .init_irq = ep93xx_init_irq,
+ .timer = &ep93xx_timer,
+ .init_machine = micro9l_init_machine,
+MACHINE_END
+#endif
+
.unmask = iop13xx_irq_unmask3,
};
+extern void iop_init_cp6_handler(void);
+
void __init iop13xx_init_irq(void)
{
unsigned int i;
u32 cp_flags = iop13xx_cp6_save();
+ iop_init_cp6_handler();
/* disable all interrupts */
write_intctl_0(0);
{
int i;
+ iop_init_cp6_handler();
+
intctl_write(0);
intstr_write(0);
if (machine_is_glantank() ||
.map_irq = n2100_pci_map_irq,
};
+/*
+ * Both r8169 chips on the n2100 exhibit PCI parity problems. Set
+ * the ->broken_parity_status flag for both ports so that the r8169
+ * driver knows it should ignore error interrupts.
+ */
+static void n2100_fixup_r8169(struct pci_dev *dev)
+{
+ if (dev->bus->number == 0 &&
+ (dev->devfn == PCI_DEVFN(1, 0) ||
+ dev->devfn == PCI_DEVFN(2, 0)))
+ dev->broken_parity_status = 1;
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_REALTEK, PCI_ANY_ID, n2100_fixup_r8169);
+
static int __init n2100_pci_init(void)
{
if (machine_is_n2100())
{
int i;
+ iop_init_cp6_handler();
+
intctl0_write(0);
intctl1_write(0);
intstr0_write(0);
NSLU2 NAS device. For more information on this platform,
see http://www.nslu2-linux.org
-config ARCH_AVILA
+config MACH_AVILA
bool "Avila"
select PCI
help
Avila Network Platform. For more information on this platform,
see <file:Documentation/arm/IXP4xx>.
+config MACH_LOFT
+ bool "Loft"
+ depends on MACH_AVILA
+ help
+ Say 'Y' here if you want your kernel to support the Giant
+ Shoulder Inc Loft board (a minor variation on the standard
+ Gateworks Avila Network Platform).
+
config ARCH_ADI_COYOTE
bool "Coyote"
select PCI
#
config ARCH_IXDP4XX
bool
- depends on ARCH_IXDP425 || ARCH_AVILA || MACH_IXDP465
+ depends on ARCH_IXDP425 || MACH_IXDP465
default y
#
obj-pci-n :=
obj-pci-$(CONFIG_ARCH_IXDP4XX) += ixdp425-pci.o
+obj-pci-$(CONFIG_MACH_AVILA) += avila-pci.o
obj-pci-$(CONFIG_MACH_IXDPG425) += ixdpg425-pci.o
obj-pci-$(CONFIG_ARCH_ADI_COYOTE) += coyote-pci.o
obj-pci-$(CONFIG_MACH_GTWX5715) += gtwx5715-pci.o
obj-y += common.o
obj-$(CONFIG_ARCH_IXDP4XX) += ixdp425-setup.o
+obj-$(CONFIG_MACH_AVILA) += avila-setup.o
obj-$(CONFIG_MACH_IXDPG425) += coyote-setup.o
obj-$(CONFIG_ARCH_ADI_COYOTE) += coyote-setup.o
obj-$(CONFIG_MACH_GTWX5715) += gtwx5715-setup.o
--- /dev/null
+/*
+ * arch/arm/mach-ixp4xx/avila-pci.c
+ *
+ * Gateworks Avila board-level PCI initialization
+ *
+ * Author: Michael-Luke Jones <mlj28@cam.ac.uk>
+ *
+ * Based on ixdp-pci.c
+ * Copyright (C) 2002 Intel Corporation.
+ * Copyright (C) 2003-2004 MontaVista Software, Inc.
+ *
+ * Maintainer: Deepak Saxena <dsaxena@plexity.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/delay.h>
+
+#include <asm/mach/pci.h>
+#include <asm/irq.h>
+#include <asm/hardware.h>
+#include <asm/mach-types.h>
+
+void __init avila_pci_preinit(void)
+{
+ set_irq_type(IRQ_AVILA_PCI_INTA, IRQT_LOW);
+ set_irq_type(IRQ_AVILA_PCI_INTB, IRQT_LOW);
+ set_irq_type(IRQ_AVILA_PCI_INTC, IRQT_LOW);
+ set_irq_type(IRQ_AVILA_PCI_INTD, IRQT_LOW);
+
+ ixp4xx_pci_preinit();
+}
+
+static int __init avila_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+ static int pci_irq_table[AVILA_PCI_IRQ_LINES] = {
+ IRQ_AVILA_PCI_INTA,
+ IRQ_AVILA_PCI_INTB,
+ IRQ_AVILA_PCI_INTC,
+ IRQ_AVILA_PCI_INTD
+ };
+
+ int irq = -1;
+
+ if (slot >= 1 &&
+ slot <= (machine_is_loft() ? LOFT_PCI_MAX_DEV : AVILA_PCI_MAX_DEV) &&
+ pin >= 1 && pin <= AVILA_PCI_IRQ_LINES) {
+ irq = pci_irq_table[(slot + pin - 2) % 4];
+ }
+
+ return irq;
+}
+
+struct hw_pci avila_pci __initdata = {
+ .nr_controllers = 1,
+ .preinit = avila_pci_preinit,
+ .swizzle = pci_std_swizzle,
+ .setup = ixp4xx_setup,
+ .scan = ixp4xx_scan_bus,
+ .map_irq = avila_map_irq,
+};
+
+int __init avila_pci_init(void)
+{
+ if (machine_is_avila() || machine_is_loft())
+ pci_common_init(&avila_pci);
+ return 0;
+}
+
+subsys_initcall(avila_pci_init);
+
--- /dev/null
+/*
+ * arch/arm/mach-ixp4xx/avila-setup.c
+ *
+ * Gateworks Avila board-setup
+ *
+ * Author: Michael-Luke Jones <mlj28@cam.ac.uk>
+ *
+ * Based on ixdp-setup.c
+ * Copyright (C) 2003-2005 MontaVista Software, Inc.
+ *
+ * Author: Deepak Saxena <dsaxena@plexity.net>
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/serial.h>
+#include <linux/tty.h>
+#include <linux/serial_8250.h>
+#include <linux/slab.h>
+
+#include <asm/types.h>
+#include <asm/setup.h>
+#include <asm/memory.h>
+#include <asm/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/flash.h>
+
+static struct flash_platform_data avila_flash_data = {
+ .map_name = "cfi_probe",
+ .width = 2,
+};
+
+static struct resource avila_flash_resource = {
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device avila_flash = {
+ .name = "IXP4XX-Flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &avila_flash_data,
+ },
+ .num_resources = 1,
+ .resource = &avila_flash_resource,
+};
+
+static struct ixp4xx_i2c_pins avila_i2c_gpio_pins = {
+ .sda_pin = AVILA_SDA_PIN,
+ .scl_pin = AVILA_SCL_PIN,
+};
+
+static struct platform_device avila_i2c_controller = {
+ .name = "IXP4XX-I2C",
+ .id = 0,
+ .dev = {
+ .platform_data = &avila_i2c_gpio_pins,
+ },
+ .num_resources = 0
+};
+
+static struct resource avila_uart_resources[] = {
+ {
+ .start = IXP4XX_UART1_BASE_PHYS,
+ .end = IXP4XX_UART1_BASE_PHYS + 0x0fff,
+ .flags = IORESOURCE_MEM
+ },
+ {
+ .start = IXP4XX_UART2_BASE_PHYS,
+ .end = IXP4XX_UART2_BASE_PHYS + 0x0fff,
+ .flags = IORESOURCE_MEM
+ }
+};
+
+static struct plat_serial8250_port avila_uart_data[] = {
+ {
+ .mapbase = IXP4XX_UART1_BASE_PHYS,
+ .membase = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
+ .irq = IRQ_IXP4XX_UART1,
+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+ .iotype = UPIO_MEM,
+ .regshift = 2,
+ .uartclk = IXP4XX_UART_XTAL,
+ },
+ {
+ .mapbase = IXP4XX_UART2_BASE_PHYS,
+ .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
+ .irq = IRQ_IXP4XX_UART2,
+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+ .iotype = UPIO_MEM,
+ .regshift = 2,
+ .uartclk = IXP4XX_UART_XTAL,
+ },
+ { },
+};
+
+static struct platform_device avila_uart = {
+ .name = "serial8250",
+ .id = PLAT8250_DEV_PLATFORM,
+ .dev.platform_data = avila_uart_data,
+ .num_resources = 2,
+ .resource = avila_uart_resources
+};
+
+static struct resource avila_pata_resources[] = {
+ {
+ .flags = IORESOURCE_MEM
+ },
+ {
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .name = "intrq",
+ .start = IRQ_IXP4XX_GPIO12,
+ .end = IRQ_IXP4XX_GPIO12,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct ixp4xx_pata_data avila_pata_data = {
+ .cs0_bits = 0xbfff0043,
+ .cs1_bits = 0xbfff0043,
+};
+
+static struct platform_device avila_pata = {
+ .name = "pata_ixp4xx_cf",
+ .id = 0,
+ .dev.platform_data = &avila_pata_data,
+ .num_resources = ARRAY_SIZE(avila_pata_resources),
+ .resource = avila_pata_resources,
+};
+
+static struct platform_device *avila_devices[] __initdata = {
+ &avila_i2c_controller,
+ &avila_flash,
+ &avila_uart
+};
+
+static void __init avila_init(void)
+{
+ ixp4xx_sys_init();
+
+ avila_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
+ avila_flash_resource.end =
+ IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1;
+
+ platform_add_devices(avila_devices, ARRAY_SIZE(avila_devices));
+
+ avila_pata_resources[0].start = IXP4XX_EXP_BUS_BASE(1);
+ avila_pata_resources[0].end = IXP4XX_EXP_BUS_END(1);
+
+ avila_pata_resources[1].start = IXP4XX_EXP_BUS_BASE(2);
+ avila_pata_resources[1].end = IXP4XX_EXP_BUS_END(2);
+
+ avila_pata_data.cs0_cfg = IXP4XX_EXP_CS1;
+ avila_pata_data.cs1_cfg = IXP4XX_EXP_CS2;
+
+ platform_device_register(&avila_pata);
+
+}
+
+MACHINE_START(AVILA, "Gateworks Avila Network Platform")
+ /* Maintainer: Deepak Saxena <dsaxena@plexity.net> */
+ .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS,
+ .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
+ .map_io = ixp4xx_map_io,
+ .init_irq = ixp4xx_init_irq,
+ .timer = &ixp4xx_timer,
+ .boot_params = 0x0100,
+ .init_machine = avila_init,
+MACHINE_END
+
+ /*
+ * Loft is functionally equivalent to Avila except that it has a
+ * different number for the maximum PCI devices. The MACHINE
+ * structure below is identical to Avila except for the comment.
+ */
+#ifdef CONFIG_MACH_LOFT
+MACHINE_START(LOFT, "Giant Shoulder Inc Loft board")
+ /* Maintainer: Tom Billman <kernel@giantshoulderinc.com> */
+ .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS,
+ .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
+ .map_io = ixp4xx_map_io,
+ .init_irq = ixp4xx_init_irq,
+ .timer = &ixp4xx_timer,
+ .boot_params = 0x0100,
+ .init_machine = avila_init,
+MACHINE_END
+#endif
+
int __init ixdp425_pci_init(void)
{
if (machine_is_ixdp425() || machine_is_ixcdp1100() ||
- machine_is_avila() || machine_is_ixdp465())
+ machine_is_ixdp465())
pci_common_init(&ixdp425_pci);
return 0;
}
.init_machine = ixdp425_init,
MACHINE_END
#endif
-
-/*
- * Avila is functionally equivalent to IXDP425 except that it adds
- * a CF IDE slot hanging off the expansion bus. When we have a
- * driver for IXP4xx CF IDE with driver model support we'll move
- * Avila to it's own setup file.
- */
-#ifdef CONFIG_ARCH_AVILA
-MACHINE_START(AVILA, "Gateworks Avila Network Platform")
- /* Maintainer: Deepak Saxena <dsaxena@plexity.net> */
- .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS,
- .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
- .map_io = ixp4xx_map_io,
- .init_irq = ixp4xx_init_irq,
- .timer = &ixp4xx_timer,
- .boot_params = 0x0100,
- .init_machine = ixdp425_init,
-MACHINE_END
-#endif
-
--- /dev/null
+if ARCH_NS9XXX
+
+menu "NS9xxx Implementations"
+
+config MACH_CC9P9360DEV
+ bool "Connect Core 9P 9360 on an A9M9750 Devboard"
+ select PROCESSOR_NS9360
+ select BOARD_A9M9750DEV
+ help
+ Say Y here if you are using the Digi Connect Core 9P 9360
+ on an A9M9750 Development Board.
+
+config PROCESSOR_NS9360
+ bool
+
+config BOARD_A9M9750DEV
+ bool
+
+endmenu
+
+endif
--- /dev/null
+obj-y := irq.o time.o generic.o
+
+obj-$(CONFIG_MACH_CC9P9360DEV) += mach-cc9p9360dev.o
+
+obj-$(CONFIG_BOARD_A9M9750DEV) += board-a9m9750dev.o
--- /dev/null
+zreladdr-y := 0x108000
+params_phys-y := 0x100
--- /dev/null
+/*
+ * arch/arm/mach-ns9xxx/board-a9m9750dev.c
+ *
+ * Copyright (C) 2006,2007 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#include <linux/platform_device.h>
+#include <linux/serial_8250.h>
+#include <linux/irq.h>
+
+#include <asm/mach/map.h>
+
+#include <asm/arch-ns9xxx/board.h>
+#include <asm/arch-ns9xxx/regs-sys.h>
+#include <asm/arch-ns9xxx/regs-mem.h>
+#include <asm/arch-ns9xxx/regs-bbu.h>
+#include <asm/arch-ns9xxx/regs-board-a9m9750dev.h>
+
+#include "board-a9m9750dev.h"
+
+static struct map_desc board_a9m9750dev_io_desc[] __initdata = {
+ { /* FPGA on CS0 */
+ .virtual = io_p2v(NS9XXX_CSxSTAT_PHYS(0)),
+ .pfn = __phys_to_pfn(NS9XXX_CSxSTAT_PHYS(0)),
+ .length = NS9XXX_CS0STAT_LENGTH,
+ .type = MT_DEVICE,
+ },
+};
+
+void __init board_a9m9750dev_map_io(void)
+{
+ iotable_init(board_a9m9750dev_io_desc,
+ ARRAY_SIZE(board_a9m9750dev_io_desc));
+}
+
+static void a9m9750dev_fpga_ack_irq(unsigned int irq)
+{
+ /* nothing */
+}
+
+static void a9m9750dev_fpga_mask_irq(unsigned int irq)
+{
+ FPGA_IER &= ~(1 << (irq - FPGA_IRQ(0)));
+}
+
+static void a9m9750dev_fpga_maskack_irq(unsigned int irq)
+{
+ a9m9750dev_fpga_mask_irq(irq);
+ a9m9750dev_fpga_ack_irq(irq);
+}
+
+static void a9m9750dev_fpga_unmask_irq(unsigned int irq)
+{
+ FPGA_IER |= 1 << (irq - FPGA_IRQ(0));
+}
+
+static struct irq_chip a9m9750dev_fpga_chip = {
+ .ack = a9m9750dev_fpga_ack_irq,
+ .mask = a9m9750dev_fpga_mask_irq,
+ .mask_ack = a9m9750dev_fpga_maskack_irq,
+ .unmask = a9m9750dev_fpga_unmask_irq,
+};
+
+static void a9m9750dev_fpga_demux_handler(unsigned int irq,
+ struct irq_desc *desc)
+{
+ int stat = FPGA_ISR;
+
+ while (stat != 0) {
+ int irqno = fls(stat) - 1;
+
+ stat &= ~(1 << irqno);
+
+ desc = irq_desc + FPGA_IRQ(irqno);
+
+ desc_handle_irq(irqno, desc);
+ }
+}
+
+void __init board_a9m9750dev_init_irq(void)
+{
+ u32 reg;
+ int i;
+
+ /*
+ * configure gpio for IRQ_EXT2
+ * use GPIO 11, because GPIO 32 is used for the LCD
+ */
+ /* XXX: proper GPIO handling */
+ BBU_GC(2) &= ~0x2000;
+
+ for (i = FPGA_IRQ(0); i <= FPGA_IRQ(7); ++i) {
+ set_irq_chip(i, &a9m9750dev_fpga_chip);
+ set_irq_handler(i, handle_level_irq);
+ set_irq_flags(i, IRQF_VALID);
+ }
+
+ /* IRQ_EXT2: level sensitive + active low */
+ reg = SYS_EIC(2);
+ REGSET(reg, SYS_EIC, PLTY, AL);
+ REGSET(reg, SYS_EIC, LVEDG, LEVEL);
+ SYS_EIC(2) = reg;
+
+ set_irq_chained_handler(IRQ_EXT2,
+ a9m9750dev_fpga_demux_handler);
+}
+
+static struct plat_serial8250_port board_a9m9750dev_serial8250_port[] = {
+ {
+ .iobase = FPGA_UARTA_BASE,
+ .membase = (unsigned char*)FPGA_UARTA_BASE,
+ .mapbase = FPGA_UARTA_BASE,
+ .irq = IRQ_FPGA_UARTA,
+ .iotype = UPIO_MEM,
+ .uartclk = 18432000,
+ .regshift = 0,
+ .flags = UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ,
+ }, {
+ .iobase = FPGA_UARTB_BASE,
+ .membase = (unsigned char*)FPGA_UARTB_BASE,
+ .mapbase = FPGA_UARTB_BASE,
+ .irq = IRQ_FPGA_UARTB,
+ .iotype = UPIO_MEM,
+ .uartclk = 18432000,
+ .regshift = 0,
+ .flags = UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ,
+ }, {
+ .iobase = FPGA_UARTC_BASE,
+ .membase = (unsigned char*)FPGA_UARTC_BASE,
+ .mapbase = FPGA_UARTC_BASE,
+ .irq = IRQ_FPGA_UARTC,
+ .iotype = UPIO_MEM,
+ .uartclk = 18432000,
+ .regshift = 0,
+ .flags = UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ,
+ }, {
+ .iobase = FPGA_UARTD_BASE,
+ .membase = (unsigned char*)FPGA_UARTD_BASE,
+ .mapbase = FPGA_UARTD_BASE,
+ .irq = IRQ_FPGA_UARTD,
+ .iotype = UPIO_MEM,
+ .uartclk = 18432000,
+ .regshift = 0,
+ .flags = UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ,
+ }, {
+ /* end marker */
+ },
+};
+
+static struct platform_device board_a9m9750dev_serial_device = {
+ .name = "serial8250",
+ .dev = {
+ .platform_data = board_a9m9750dev_serial8250_port,
+ },
+};
+
+static struct platform_device *board_a9m9750dev_devices[] __initdata = {
+ &board_a9m9750dev_serial_device,
+};
+
+void __init board_a9m9750dev_init_machine(void)
+{
+ u32 reg;
+
+ /* setup static CS0: memory base ... */
+ REGSETIM(SYS_SMCSSMB(0), SYS_SMCSSMB, CSxB,
+ NS9XXX_CSxSTAT_PHYS(0) >> 12);
+
+ /* ... and mask */
+ reg = SYS_SMCSSMM(0);
+ REGSETIM(reg, SYS_SMCSSMM, CSxM, 0xfffff);
+ REGSET(reg, SYS_SMCSSMM, CSEx, EN);
+ SYS_SMCSSMM(0) = reg;
+
+ /* setup static CS0: memory configuration */
+ reg = MEM_SMC(0);
+ REGSET(reg, MEM_SMC, WSMC, OFF);
+ REGSET(reg, MEM_SMC, BSMC, OFF);
+ REGSET(reg, MEM_SMC, EW, OFF);
+ REGSET(reg, MEM_SMC, PB, 1);
+ REGSET(reg, MEM_SMC, PC, AL);
+ REGSET(reg, MEM_SMC, PM, DIS);
+ REGSET(reg, MEM_SMC, MW, 8);
+ MEM_SMC(0) = reg;
+
+ /* setup static CS0: timing */
+ MEM_SMWED(0) = 0x2;
+ MEM_SMOED(0) = 0x2;
+ MEM_SMRD(0) = 0x6;
+ MEM_SMWD(0) = 0x6;
+
+ platform_add_devices(board_a9m9750dev_devices,
+ ARRAY_SIZE(board_a9m9750dev_devices));
+}
+
--- /dev/null
+/*
+ * arch/arm/mach-ns9xxx/board-a9m9750dev.h
+ *
+ * Copyright (C) 2006 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#include <linux/init.h>
+
+void __init board_a9m9750dev_map_io(void);
+void __init board_a9m9750dev_init_machine(void);
+void __init board_a9m9750dev_init_irq(void);
--- /dev/null
+/*
+ * arch/arm/mach-ns9xxx/generic.c
+ *
+ * Copyright (C) 2006 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <asm/memory.h>
+#include <asm/page.h>
+#include <asm/mach-types.h>
+#include <asm/mach/map.h>
+#include <asm/arch-ns9xxx/regs-sys.h>
+#include <asm/arch-ns9xxx/regs-mem.h>
+#include <asm/arch-ns9xxx/board.h>
+
+static struct map_desc standard_io_desc[] __initdata = {
+ { /* BBus */
+ .virtual = io_p2v(0x90000000),
+ .pfn = __phys_to_pfn(0x90000000),
+ .length = 0x00700000,
+ .type = MT_DEVICE,
+ }, { /* AHB */
+ .virtual = io_p2v(0xa0100000),
+ .pfn = __phys_to_pfn(0xa0100000),
+ .length = 0x00900000,
+ .type = MT_DEVICE,
+ },
+};
+
+void __init ns9xxx_map_io(void)
+{
+ iotable_init(standard_io_desc, ARRAY_SIZE(standard_io_desc));
+}
+
+void __init ns9xxx_init_machine(void)
+{
+}
--- /dev/null
+/*
+ * arch/arm/mach-ns9xxx/generic.h
+ *
+ * Copyright (C) 2006 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#include <linux/time.h>
+#include <asm/mach/time.h>
+#include <linux/init.h>
+
+void __init ns9xxx_init_irq(void);
+void __init ns9xxx_map_io(void);
+void __init ns9xxx_init_machine(void);
+
+extern struct sys_timer ns9xxx_timer;
--- /dev/null
+/*
+ * arch/arm/mach-ns9xxx/irq.c
+ *
+ * Copyright (C) 2006,2007 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#include <linux/interrupt.h>
+#include <asm/mach/irq.h>
+#include <asm/mach-types.h>
+#include <asm/arch-ns9xxx/regs-sys.h>
+#include <asm/arch-ns9xxx/irqs.h>
+#include <asm/arch-ns9xxx/board.h>
+
+#include "generic.h"
+
+static void ns9xxx_ack_irq_timer(unsigned int irq)
+{
+ u32 tc = SYS_TC(irq - IRQ_TIMER0);
+
+ REGSET(tc, SYS_TCx, INTC, SET);
+ SYS_TC(irq - IRQ_TIMER0) = tc;
+
+ REGSET(tc, SYS_TCx, INTC, UNSET);
+ SYS_TC(irq - IRQ_TIMER0) = tc;
+}
+
+void (*ns9xxx_ack_irq_functions[NR_IRQS])(unsigned int) = {
+ [IRQ_TIMER0] = ns9xxx_ack_irq_timer,
+ [IRQ_TIMER1] = ns9xxx_ack_irq_timer,
+ [IRQ_TIMER2] = ns9xxx_ack_irq_timer,
+ [IRQ_TIMER3] = ns9xxx_ack_irq_timer,
+};
+
+static void ns9xxx_mask_irq(unsigned int irq)
+{
+ /* XXX: better use cpp symbols */
+ SYS_IC(irq / 4) &= ~(1 << (7 + 8 * (3 - (irq & 3))));
+}
+
+static void ns9xxx_ack_irq(unsigned int irq)
+{
+ if (!ns9xxx_ack_irq_functions[irq]) {
+ printk(KERN_ERR "no ack function for irq %u\n", irq);
+ BUG();
+ }
+
+ ns9xxx_ack_irq_functions[irq](irq);
+ SYS_ISRADDR = 0;
+}
+
+static void ns9xxx_maskack_irq(unsigned int irq)
+{
+ ns9xxx_mask_irq(irq);
+ ns9xxx_ack_irq(irq);
+}
+
+static void ns9xxx_unmask_irq(unsigned int irq)
+{
+ /* XXX: better use cpp symbols */
+ SYS_IC(irq / 4) |= 1 << (7 + 8 * (3 - (irq & 3)));
+}
+
+static struct irq_chip ns9xxx_chip = {
+ .ack = ns9xxx_ack_irq,
+ .mask = ns9xxx_mask_irq,
+ .mask_ack = ns9xxx_maskack_irq,
+ .unmask = ns9xxx_unmask_irq,
+};
+
+void __init ns9xxx_init_irq(void)
+{
+ int i;
+
+ /* disable all IRQs */
+ for (i = 0; i < 8; ++i)
+ SYS_IC(i) = (4 * i) << 24 | (4 * i + 1) << 16 |
+ (4 * i + 2) << 8 | (4 * i + 3);
+
+ /* simple interrupt prio table:
+ * prio(x) < prio(y) <=> x < y
+ */
+ for (i = 0; i < 32; ++i)
+ SYS_IVA(i) = i;
+
+ for (i = IRQ_WATCHDOG; i <= IRQ_EXT3; ++i) {
+ set_irq_chip(i, &ns9xxx_chip);
+ set_irq_handler(i, handle_level_irq);
+ set_irq_flags(i, IRQF_VALID);
+ }
+}
--- /dev/null
+/*
+ * arch/arm/mach-ns9xxx/mach-cc9p9360dev.c
+ *
+ * Copyright (C) 2006 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#include <asm/mach/arch.h>
+#include <asm/mach-types.h>
+
+#include "board-a9m9750dev.h"
+#include "generic.h"
+
+static void __init mach_cc9p9360dev_map_io(void)
+{
+ ns9xxx_map_io();
+ board_a9m9750dev_map_io();
+}
+
+static void __init mach_cc9p9360dev_init_irq(void)
+{
+ ns9xxx_init_irq();
+ board_a9m9750dev_init_irq();
+}
+
+static void __init mach_cc9p9360dev_init_machine(void)
+{
+ ns9xxx_init_machine();
+ board_a9m9750dev_init_machine();
+}
+
+MACHINE_START(CC9P9360DEV, "Connect Core 9P 9360 on an A9M9750 Devboard")
+ .map_io = mach_cc9p9360dev_map_io,
+ .init_irq = mach_cc9p9360dev_init_irq,
+ .init_machine = mach_cc9p9360dev_init_machine,
+ .timer = &ns9xxx_timer,
+ .boot_params = 0x100,
+MACHINE_END
--- /dev/null
+/*
+ * arch/arm/mach-ns9xxx/time.c
+ *
+ * Copyright (C) 2006 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#include <linux/jiffies.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <asm/arch-ns9xxx/regs-sys.h>
+#include <asm/arch-ns9xxx/clock.h>
+#include <asm/arch-ns9xxx/irqs.h>
+#include <asm/arch/system.h>
+#include "generic.h"
+
+#define TIMERCLOCKSELECT 64
+
+static u32 usecs_per_tick;
+
+static irqreturn_t
+ns9xxx_timer_interrupt(int irq, void *dev_id)
+{
+ write_seqlock(&xtime_lock);
+ timer_tick();
+ write_sequnlock(&xtime_lock);
+
+ return IRQ_HANDLED;
+}
+
+static unsigned long ns9xxx_timer_gettimeoffset(void)
+{
+ /* return the microseconds which have passed since the last interrupt
+ * was _serviced_. That is, if an interrupt is pending or the counter
+ * reloads, return one periode more. */
+
+ u32 counter1 = SYS_TR(0);
+ int pending = SYS_ISR & (1 << IRQ_TIMER0);
+ u32 counter2 = SYS_TR(0);
+ u32 elapsed;
+
+ if (pending || counter2 > counter1)
+ elapsed = 2 * SYS_TRC(0) - counter2;
+ else
+ elapsed = SYS_TRC(0) - counter1;
+
+ return (elapsed * usecs_per_tick) >> 16;
+
+}
+
+static struct irqaction ns9xxx_timer_irq = {
+ .name = "NS9xxx Timer Tick",
+ .flags = IRQF_DISABLED | IRQF_TIMER,
+ .handler = ns9xxx_timer_interrupt,
+};
+
+static void __init ns9xxx_timer_init(void)
+{
+ int tc;
+
+ usecs_per_tick =
+ SH_DIV(1000000 * TIMERCLOCKSELECT, ns9xxx_cpuclock(), 16);
+
+ /* disable timer */
+ if ((tc = SYS_TC(0)) & SYS_TCx_TEN)
+ SYS_TC(0) = tc & ~SYS_TCx_TEN;
+
+ SYS_TRC(0) = SH_DIV(ns9xxx_cpuclock(), (TIMERCLOCKSELECT * HZ), 0);
+
+ REGSET(tc, SYS_TCx, TEN, EN);
+ REGSET(tc, SYS_TCx, TLCS, DIV64); /* This must match TIMERCLOCKSELECT */
+ REGSET(tc, SYS_TCx, INTS, EN);
+ REGSET(tc, SYS_TCx, UDS, DOWN);
+ REGSET(tc, SYS_TCx, TDBG, STOP);
+ REGSET(tc, SYS_TCx, TSZ, 32);
+ REGSET(tc, SYS_TCx, REN, EN);
+ SYS_TC(0) = tc;
+
+ setup_irq(IRQ_TIMER0, &ns9xxx_timer_irq);
+}
+
+struct sys_timer ns9xxx_timer = {
+ .init = ns9xxx_timer_init,
+ .offset = ns9xxx_timer_gettimeoffset,
+};
.num_resources = ARRAY_SIZE(i2c_resources),
};
+#ifdef CONFIG_PXA27x
+static struct resource i2c_power_resources[] = {
+ {
+ .start = 0x40f00180,
+ .end = 0x40f001a3,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = IRQ_PWRI2C,
+ .end = IRQ_PWRI2C,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device i2c_power_device = {
+ .name = "pxa2xx-i2c",
+ .id = 1,
+ .resource = i2c_power_resources,
+ .num_resources = ARRAY_SIZE(i2c_resources),
+};
+#endif
+
void __init pxa_set_i2c_info(struct i2c_pxa_platform_data *info)
{
i2c_device.dev.platform_data = info;
&stuart_device,
&pxaficp_device,
&i2c_device,
+#ifdef CONFIG_PXA27x
+ &i2c_power_device,
+#endif
&i2s_device,
&pxartc_device,
};
config REALVIEW_MPCORE
bool "Support MPcore tile"
depends on MACH_REALVIEW_EB
+ select CACHE_L2X0
help
Enable support for the MPCore tile on the Realview platform.
Since there are device address and interrupt differences, a
kernel built with this option enabled is not compatible with
other tiles.
+config REALVIEW_MPCORE_REVB
+ bool "Support MPcore RevB tile"
+ depends on REALVIEW_MPCORE
+ default n
+ help
+ Enable support for the MPCore RevB tile on the Realview platform.
+ Since there are device address differences, a
+ kernel built with this option enabled is not compatible with
+ other tiles.
+
endmenu
* core (e.g. timer irq), then they will not have been enabled
* for us: do so
*/
- gic_cpu_init(__io_address(REALVIEW_GIC_CPU_BASE));
+ gic_cpu_init(0, __io_address(REALVIEW_GIC_CPU_BASE));
/*
* let the primary processor know we're out of the
* pen, then head off into the C entry point
*/
pen_release = -1;
+ smp_wmb();
/*
* Synchronise with the boot thread.
timeout = jiffies + (1 * HZ);
while (time_before(jiffies, timeout)) {
+ smp_rmb();
if (pen_release == -1)
break;
#include <asm/mach-types.h>
#include <asm/hardware/gic.h>
#include <asm/hardware/icst307.h>
+#include <asm/hardware/cache-l2x0.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
.pfn = __phys_to_pfn(REALVIEW_GIC_DIST_BASE),
.length = SZ_4K,
.type = MT_DEVICE,
+ },
+#ifdef CONFIG_REALVIEW_MPCORE
+ {
+ .virtual = IO_ADDRESS(REALVIEW_GIC1_CPU_BASE),
+ .pfn = __phys_to_pfn(REALVIEW_GIC1_CPU_BASE),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = IO_ADDRESS(REALVIEW_GIC1_DIST_BASE),
+ .pfn = __phys_to_pfn(REALVIEW_GIC1_DIST_BASE),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
}, {
+ .virtual = IO_ADDRESS(REALVIEW_MPCORE_L220_BASE),
+ .pfn = __phys_to_pfn(REALVIEW_MPCORE_L220_BASE),
+ .length = SZ_8K,
+ .type = MT_DEVICE,
+ },
+#endif
+ {
.virtual = IO_ADDRESS(REALVIEW_SCTL_BASE),
.pfn = __phys_to_pfn(REALVIEW_SCTL_BASE),
.length = SZ_4K,
#ifdef CONFIG_REALVIEW_MPCORE
unsigned int pldctrl;
writel(0x0000a05f, __io_address(REALVIEW_SYS_LOCK));
- pldctrl = readl(__io_address(REALVIEW_SYS_BASE) + 0xd8);
+ pldctrl = readl(__io_address(REALVIEW_SYS_BASE) + REALVIEW_MPCORE_SYS_PLD_CTRL1);
pldctrl |= 0x00800000; /* New irq mode */
- writel(pldctrl, __io_address(REALVIEW_SYS_BASE) + 0xd8);
+ writel(pldctrl, __io_address(REALVIEW_SYS_BASE) + REALVIEW_MPCORE_SYS_PLD_CTRL1);
writel(0x00000000, __io_address(REALVIEW_SYS_LOCK));
#endif
- gic_dist_init(__io_address(REALVIEW_GIC_DIST_BASE));
- gic_cpu_init(__io_address(REALVIEW_GIC_CPU_BASE));
+ gic_dist_init(0, __io_address(REALVIEW_GIC_DIST_BASE), 29);
+ gic_cpu_init(0, __io_address(REALVIEW_GIC_CPU_BASE));
+#ifdef CONFIG_REALVIEW_MPCORE
+ gic_dist_init(1, __io_address(REALVIEW_GIC1_DIST_BASE), 64);
+ gic_cpu_init(1, __io_address(REALVIEW_GIC1_CPU_BASE));
+ gic_cascade_irq(1, IRQ_EB_IRQ1);
+#endif
}
static void __init realview_eb_init(void)
{
int i;
+#ifdef CONFIG_REALVIEW_MPCORE
+ /* 1MB (128KB/way), 8-way associativity, evmon/parity/share enabled
+ * Bits: .... ...0 0111 1001 0000 .... .... .... */
+ l2x0_init(__io_address(REALVIEW_MPCORE_L220_BASE), 0x00790000, 0xfe000fff);
+#endif
clk_register(&realview_clcd_clk);
platform_device_register(&realview_flash_device);
--- /dev/null
+# arch/arm/mach-s3c2400/Kconfig
+#
+# Copyright 2007 Simtec Electronics
+#
+# Licensed under GPLv2
+
+
+
+menu "S3C2400 Machines"
+
+
+endmenu
+
--- /dev/null
+# arch/arm/mach-s3c2400/Makefile
+#
+# Copyright 2007 Simtec Electronics
+#
+# Licensed under GPLv2
+
+obj-y :=
+obj-m :=
+obj-n :=
+obj- :=
+
+obj-$(CONFIG_CPU_S3C2400) += gpio.o
+
+# Machine support
+
-/* linux/arch/arm/mach-s3c2410/s3c2400-gpio.c
+/* linux/arch/arm/mach-s3c2400/gpio.c
*
* Copyright (c) 2006 Lucas Correia Villa Real <lucasvr@gobolinux.org>
*
-if ARCH_S3C2410
+# arch/arm/mach-s3c2410/Kconfig
+#
+# Copyright 2007 Simtec Electronics
+#
+# Licensed under GPLv2
-menu "S3C24XX Implementations"
+config CPU_S3C2410
+ bool
+ depends on ARCH_S3C2410
+ select S3C2410_CLOCK
+ select S3C2410_GPIO
+ select S3C2410_PM if PM
+ help
+ Support for S3C2410 and S3C2410A family from the S3C24XX line
+ of Samsung Mobile CPUs.
-config MACH_AML_M5900
- bool "AML M5900 Series"
- select CPU_S3C2410
- select PM_SIMTEC if PM
+config CPU_S3C2410_DMA
+ bool
+ depends on S3C2410_DMA && (CPU_S3C2410 || CPU_S3C2442)
+ default y if CPU_S3C2410 || CPU_S3C2442
help
- Say Y here if you are using the American Microsystems M5900 Series
- <http://www.amltd.com>
+ DMA device selection for S3C2410 and compatible CPUs
-config MACH_ANUBIS
- bool "Simtec Electronics ANUBIS"
- select CPU_S3C2440
- select PM_SIMTEC if PM
+config S3C2410_PM
+ bool
help
- Say Y here if you are using the Simtec Electronics ANUBIS
- development system
+ Power Management code common to S3C2410 and better
-config MACH_OSIRIS
- bool "Simtec IM2440D20 (OSIRIS) module"
- select CPU_S3C2440
- select PM_SIMTEC if PM
+config S3C2410_GPIO
+ bool
help
- Say Y here if you are using the Simtec IM2440D20 module, also
- known as the Osiris.
+ GPIO code for S3C2410 and similar processors
-config ARCH_BAST
- bool "Simtec Electronics BAST (EB2410ITX)"
- select CPU_S3C2410
- select PM_SIMTEC if PM
- select ISA
+config S3C2410_CLOCK
+ bool
help
- Say Y here if you are using the Simtec Electronics EB2410ITX
- development board (also known as BAST)
+ Clock code for the S3C2410, and similar processors
- Product page: <http://www.simtec.co.uk/products/EB2410ITX/>.
-config BAST_PC104_IRQ
- bool "BAST PC104 IRQ support"
- depends on ARCH_BAST
- default y
- help
- Say Y here to enable the PC104 IRQ routing on the
- Simtec BAST (EB2410ITX)
+menu "S3C2410 Machines"
-config PM_H1940
- bool
+config ARCH_SMDK2410
+ bool "SMDK2410/A9M2410"
+ select CPU_S3C2410
+ select MACH_SMDK
help
- Internal node for H1940 and related PM
+ Say Y here if you are using the SMDK2410 or the derived module A9M2410
+ <http://www.fsforth.de>
config ARCH_H1940
bool "IPAQ H1940"
help
Say Y here if you are using the HP IPAQ H1940
- <http://www.handhelds.org/projects/h1940.html>.
+config PM_H1940
+ bool
+ help
+ Internal node for H1940 and related PM
config MACH_N30
bool "Acer N30"
help
Say Y here if you are using the Acer N30
- <http://zoo.weinigel.se/n30>.
-
-config MACH_SMDK
- bool
- help
- Common machine code for SMDK2410 and SMDK2440
-
-config ARCH_SMDK2410
- bool "SMDK2410/A9M2410"
+config ARCH_BAST
+ bool "Simtec Electronics BAST (EB2410ITX)"
select CPU_S3C2410
- select MACH_SMDK
+ select PM_SIMTEC if PM
+ select ISA
help
- Say Y here if you are using the SMDK2410 or the derived module A9M2410
- <http://www.fsforth.de>
+ Say Y here if you are using the Simtec Electronics EB2410ITX
+ development board (also known as BAST)
-config ARCH_S3C2440
- bool "SMDK2440"
- select CPU_S3C2440
- select MACH_SMDK
+config MACH_OTOM
+ bool "NexVision OTOM Board"
+ select CPU_S3C2410
help
- Say Y here if you are using the SMDK2440.
-
-config SMDK2440_CPU2440
- bool "SMDK2440 with S3C2440 CPU module"
- depends on ARCH_S3C2440
- default y if ARCH_S3C2440
- select CPU_S3C2440
-
-config SMDK2440_CPU2442
- bool "SMDM2440 with S3C2442 CPU module"
- depends on ARCH_S3C2440
- select CPU_S3C2442
+ Say Y here if you are using the Nex Vision OTOM board
-config MACH_S3C2413
- bool
+config MACH_AML_M5900
+ bool "AML M5900 Series"
+ select CPU_S3C2410
+ select PM_SIMTEC if PM
help
- Internal node for S3C2413 version of SMDK2413, so that
- machine_is_s3c2413() will work when MACH_SMDK2413 is
- selected
+ Say Y here if you are using the American Microsystems M5900 Series
+ <http://www.amltd.com>
-config MACH_SMDK2413
- bool "SMDK2413"
- select CPU_S3C2412
- select MACH_S3C2413
- select MACH_SMDK
+config BAST_PC104_IRQ
+ bool "BAST PC104 IRQ support"
+ depends on ARCH_BAST
+ default y
help
- Say Y here if you are using an SMDK2413
+ Say Y here to enable the PC104 IRQ routing on the
+ Simtec BAST (EB2410ITX)
config MACH_VR1000
bool "Thorcom VR1000"
help
Say Y here if you are using the Thorcom VR1000 board.
- This linux port is currently being maintained by Simtec, on behalf
- of Thorcom. Any queries, please contact Thorcom first.
-
-config MACH_RX3715
- bool "HP iPAQ rx3715"
- select CPU_S3C2440
- select PM_H1940 if PM
- help
- Say Y here if you are using the HP iPAQ rx3715.
-
- See <http://www.handhelds.org/projects/rx3715.html> for more
- information on this project
-
-config MACH_OTOM
- bool "NexVision OTOM Board"
- select CPU_S3C2410
- help
- Say Y here if you are using the Nex Vision OTOM board
-
-config MACH_NEXCODER_2440
- bool "NexVision NEXCODER 2440 Light Board"
- select CPU_S3C2440
- help
- Say Y here if you are using the Nex Vision NEXCODER 2440 Light Board
-
-config MACH_VSTMS
- bool "VMSTMS"
- select CPU_S3C2412
+config MACH_QT2410
+ bool "QT2410"
+ select CPU_S3C2410
help
- Say Y here if you are using an VSTMS board
+ Say Y here if you are using the Armzone QT2410
endmenu
-config S3C2410_CLOCK
- bool
- help
- Clock code for the S3C2410, and similar processors
-
-config S3C2410_PM
- bool
- help
- Power Management code common to S3C2410 and better
-
-config CPU_S3C2410_DMA
- bool
- depends on S3C2410_DMA && (CPU_S3C2410 || CPU_S3C2442)
- default y if CPU_S3C2410 || CPU_S3C2442
- help
- DMA device selection for S3C2410 and compatible CPUs
-
-config CPU_S3C2410
- bool
- depends on ARCH_S3C2410
- select S3C2410_CLOCK
- select S3C2410_PM if PM
- help
- Support for S3C2410 and S3C2410A family from the S3C24XX line
- of Samsung Mobile CPUs.
-
-# internal node to signify if we are only dealing with an S3C2412
-
-config CPU_S3C2412_ONLY
- bool
- depends on ARCH_S3C2410 && !CPU_S3C2400 && !CPU_S3C2410 && \
- !CPU_S3C2440 && !CPU_S3C2442 && CPU_S3C2412
- default y if CPU_S3C2412
-
-config S3C2412_PM
- bool
- help
- Internal config node to apply S3C2412 power management
-
-config CPU_S3C2412
- bool
- depends on ARCH_S3C2410
- select S3C2412_PM if PM
- help
- Support for the S3C2412 and S3C2413 SoCs from the S3C24XX line
-
-config CPU_S3C244X
- bool
- depends on ARCH_S3C2410 && (CPU_S3C2440 || CPU_S3C2442)
- help
- Support for S3C2440 and S3C2442 Samsung Mobile CPU based systems.
-
-config CPU_S3C2440
- bool
- depends on ARCH_S3C2410
- select S3C2410_CLOCK
- select S3C2410_PM if PM
- select CPU_S3C244X
- help
- Support for S3C2440 Samsung Mobile CPU based systems.
-
-config CPU_S3C2442
- bool
- depends on ARCH_S3C2420
- select S3C2410_CLOCK
- select S3C2410_PM if PM
- select CPU_S3C244X
- help
- Support for S3C2442 Samsung Mobile CPU based systems.
-
-comment "S3C2410 Boot"
-
-config S3C2410_BOOT_WATCHDOG
- bool "S3C2410 Initialisation watchdog"
- depends on ARCH_S3C2410 && S3C2410_WATCHDOG
- help
- Say y to enable the watchdog during the kernel decompression
- stage. If the kernel fails to uncompress, then the watchdog
- will trigger a reset and the system should restart.
-
- Although this uses the same hardware unit as the kernel watchdog
- driver, it is not a replacement for it. If you use this option,
- you will have to use the watchdg driver to either stop the timeout
- or restart it. If you do not, then your kernel will reboot after
- startup.
-
- The driver uses a fixed timeout value, so the exact time till the
- system resets depends on the value of PCLK. The timeout on an
- 200MHz s3c2410 should be about 30 seconds.
-
-config S3C2410_BOOT_ERROR_RESET
- bool "S3C2410 Reboot on decompression error"
- depends on ARCH_S3C2410
- help
- Say y here to use the watchdog to reset the system if the
- kernel decompressor detects an error during decompression.
-
-
-comment "S3C2410 Setup"
-
-config S3C2410_DMA
- bool "S3C2410 DMA support"
- depends on ARCH_S3C2410
- help
- S3C2410 DMA support. This is needed for drivers like sound which
- use the S3C2410's DMA system to move data to and from the
- peripheral blocks.
-
-config S3C2410_DMA_DEBUG
- bool "S3C2410 DMA support debug"
- depends on ARCH_S3C2410 && S3C2410_DMA
- help
- Enable debugging output for the DMA code. This option sends info
- to the kernel log, at priority KERN_DEBUG.
-
- Note, it is easy to create and fill the log buffer in a small
- amount of time, as well as using an significant percentage of
- the CPU time doing so.
-
-
-config S3C2410_PM_DEBUG
- bool "S3C2410 PM Suspend debug"
- depends on ARCH_S3C2410 && PM
- help
- Say Y here if you want verbose debugging from the PM Suspend and
- Resume code. See <file:Documentation/arm/Samsung-S3C24XX/Suspend.txt>
- for more information.
-
-config S3C2410_PM_CHECK
- bool "S3C2410 PM Suspend Memory CRC"
- depends on ARCH_S3C2410 && PM && CRC32
- help
- Enable the PM code's memory area checksum over sleep. This option
- will generate CRCs of all blocks of memory, and store them before
- going to sleep. The blocks are then checked on resume for any
- errors.
-
-config S3C2410_PM_CHECK_CHUNKSIZE
- int "S3C2410 PM Suspend CRC Chunksize (KiB)"
- depends on ARCH_S3C2410 && PM && S3C2410_PM_CHECK
- default 64
- help
- Set the chunksize in Kilobytes of the CRC for checking memory
- corruption over suspend and resume. A smaller value will mean that
- the CRC data block will take more memory, but wil identify any
- faults with better precision.
-
-config PM_SIMTEC
- bool
- help
- Common power management code for systems that are
- compatible with the Simtec style of power management
-
-config S3C2410_LOWLEVEL_UART_PORT
- int "S3C2410 UART to use for low-level messages"
- default 0
- help
- Choice of which UART port to use for the low-level messages,
- such as the `Uncompressing...` at start time. The value of
- this configuration should be between zero and two. The port
- must have been initialised by the boot-loader before use.
-
- Note, this does not affect the port used by the debug messages,
- which is a separate configuration.
-
-endif
-
+# arch/arm/mach-s3c2410/Makefile
#
-# Makefile for the linux kernel.
+# Copyright 2007 Simtec Electronics
#
+# Licensed under GPLv2
-# Object file lists.
-
-obj-y := cpu.o irq.o time.o gpio.o clock.o devs.o
-obj-m :=
-obj-n :=
-obj- :=
-obj-dma-y :=
-obj-dma-n :=
-
-# DMA
-obj-$(CONFIG_S3C2410_DMA) += dma.o
-
-# S3C2400 support files
-obj-$(CONFIG_CPU_S3C2400) += s3c2400-gpio.o
-
-# S3C2410 support files
+obj-y :=
+obj-m :=
+obj-n :=
+obj- :=
obj-$(CONFIG_CPU_S3C2410) += s3c2410.o
-obj-$(CONFIG_CPU_S3C2410) += s3c2410-gpio.o
-obj-$(CONFIG_CPU_S3C2410) += s3c2410-irq.o
-
-obj-$(CONFIG_S3C2410_PM) += s3c2410-pm.o s3c2410-sleep.o
-obj-$(CONFIG_CPU_S3C2410_DMA) += s3c2410-dma.o
-
-# Power Management support
-
-obj-$(CONFIG_PM) += pm.o sleep.o
-obj-$(CONFIG_PM_SIMTEC) += pm-simtec.o
-obj-$(CONFIG_PM_H1940) += pm-h1940.o
-
-# S3C2412 support
-obj-$(CONFIG_CPU_S3C2412) += s3c2412.o
-obj-$(CONFIG_CPU_S3C2412) += s3c2412-irq.o
-obj-$(CONFIG_CPU_S3C2412) += s3c2412-clock.o
-obj-dma-$(CONFIG_CPU_S3C2412) += s3c2412-dma.o
-
-obj-$(CONFIG_S3C2412_PM) += s3c2412-pm.o
-
-#
-# S3C244X support
-
-obj-$(CONFIG_CPU_S3C244X) += s3c244x.o
-obj-$(CONFIG_CPU_S3C244X) += s3c244x-irq.o
-
-# Clock control
-
-obj-$(CONFIG_S3C2410_CLOCK) += s3c2410-clock.o
-
-# S3C2440 support
-
-obj-$(CONFIG_CPU_S3C2440) += s3c2440.o s3c2440-dsc.o
-obj-$(CONFIG_CPU_S3C2440) += s3c2440-irq.o
-obj-$(CONFIG_CPU_S3C2440) += s3c2440-clock.o
-obj-$(CONFIG_CPU_S3C2440) += s3c2410-gpio.o
-obj-dma-$(CONFIG_CPU_S3C2440) += s3c2440-dma.o
+obj-$(CONFIG_CPU_S3C2410) += irq.o
+obj-$(CONFIG_CPU_S3C2410_DMA) += dma.o
+obj-$(CONFIG_CPU_S3C2410_DMA) += dma.o
+obj-$(CONFIG_S3C2410_PM) += pm.o sleep.o
+obj-$(CONFIG_S3C2410_GPIO) += gpio.o
+obj-$(CONFIG_S3C2410_CLOCK) += clock.o
-# S3C2442 support
+# Machine support
-obj-$(CONFIG_CPU_S3C2442) += s3c2442.o
-obj-$(CONFIG_CPU_S3C2442) += s3c2442-clock.o
-
-# bast extras
-
-obj-$(CONFIG_BAST_PC104_IRQ) += bast-irq.o
-
-# merge in dma objects
-
-obj-y += $(obj-dma-y)
-
-# machine specific support
-
-obj-$(CONFIG_MACH_AML_M5900) += mach-amlm5900.o
-obj-$(CONFIG_MACH_ANUBIS) += mach-anubis.o
-obj-$(CONFIG_MACH_OSIRIS) += mach-osiris.o
-obj-$(CONFIG_ARCH_BAST) += mach-bast.o usb-simtec.o
+obj-$(CONFIG_ARCH_SMDK2410) += mach-smdk2410.o
obj-$(CONFIG_ARCH_H1940) += mach-h1940.o
+obj-$(CONFIG_PM_H1940) += pm-h1940.o
obj-$(CONFIG_MACH_N30) += mach-n30.o
-obj-$(CONFIG_ARCH_SMDK2410) += mach-smdk2410.o
-obj-$(CONFIG_MACH_SMDK2413) += mach-smdk2413.o
-obj-$(CONFIG_ARCH_S3C2440) += mach-smdk2440.o
-obj-$(CONFIG_MACH_VR1000) += mach-vr1000.o usb-simtec.o
-obj-$(CONFIG_MACH_RX3715) += mach-rx3715.o
+obj-$(CONFIG_ARCH_BAST) += mach-bast.o usb-simtec.o
obj-$(CONFIG_MACH_OTOM) += mach-otom.o
-obj-$(CONFIG_MACH_NEXCODER_2440) += mach-nexcoder.o
-obj-$(CONFIG_MACH_VSTMS) += mach-vstms.o
-
-obj-$(CONFIG_MACH_SMDK) += common-smdk.o
\ No newline at end of file
+obj-$(CONFIG_MACH_AML_M5900) += mach-amlm5900.o
+obj-$(CONFIG_BAST_PC104_IRQ) += bast-irq.o
+obj-$(CONFIG_MACH_VR1000) += mach-vr1000.o usb-simtec.o
+obj-$(CONFIG_MACH_QT2410) += mach-qt2410.o
#include <asm/arch/bast-map.h>
#include <asm/arch/bast-irq.h>
-#include "irq.h"
+#include <asm/plat-s3c24xx/irq.h>
#if 0
#include <asm/debug-ll.h>
-
+/* linux/arch/arm/mach-s3c2410/bast.h
extern void bast_init_irq(void);
/* linux/arch/arm/mach-s3c2410/clock.c
*
- * Copyright (c) 2004-2005 Simtec Electronics
+ * Copyright (c) 2006 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
*
- * S3C24XX Core clock control support
- *
- * Based on, and code from linux/arch/arm/mach-versatile/clock.c
- **
- ** Copyright (C) 2004 ARM Limited.
- ** Written by Deep Blue Solutions Limited.
- *
+ * S3C2410,S3C2440,S3C2442 Clock control support
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
#include <linux/list.h>
#include <linux/errno.h>
#include <linux/err.h>
-#include <linux/platform_device.h>
#include <linux/sysdev.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
#include <linux/clk.h>
#include <linux/mutex.h>
#include <linux/delay.h>
+#include <linux/serial_core.h>
+
+#include <asm/mach/map.h>
#include <asm/hardware.h>
-#include <asm/irq.h>
#include <asm/io.h>
+#include <asm/arch/regs-serial.h>
#include <asm/arch/regs-clock.h>
#include <asm/arch/regs-gpio.h>
-#include "clock.h"
-#include "cpu.h"
-
-/* clock information */
+#include <asm/plat-s3c24xx/s3c2410.h>
+#include <asm/plat-s3c24xx/clock.h>
+#include <asm/plat-s3c24xx/cpu.h>
-static LIST_HEAD(clocks);
-
-DEFINE_MUTEX(clocks_mutex);
-
-/* enable and disable calls for use with the clk struct */
-
-static int clk_null_enable(struct clk *clk, int enable)
+int s3c2410_clkcon_enable(struct clk *clk, int enable)
{
- return 0;
-}
-
-/* Clock API calls */
+ unsigned int clocks = clk->ctrlbit;
+ unsigned long clkcon;
-struct clk *clk_get(struct device *dev, const char *id)
-{
- struct clk *p;
- struct clk *clk = ERR_PTR(-ENOENT);
- int idno;
+ clkcon = __raw_readl(S3C2410_CLKCON);
- if (dev == NULL || dev->bus != &platform_bus_type)
- idno = -1;
+ if (enable)
+ clkcon |= clocks;
else
- idno = to_platform_device(dev)->id;
-
- mutex_lock(&clocks_mutex);
-
- list_for_each_entry(p, &clocks, list) {
- if (p->id == idno &&
- strcmp(id, p->name) == 0 &&
- try_module_get(p->owner)) {
- clk = p;
- break;
- }
- }
-
- /* check for the case where a device was supplied, but the
- * clock that was being searched for is not device specific */
-
- if (IS_ERR(clk)) {
- list_for_each_entry(p, &clocks, list) {
- if (p->id == -1 && strcmp(id, p->name) == 0 &&
- try_module_get(p->owner)) {
- clk = p;
- break;
- }
- }
- }
+ clkcon &= ~clocks;
- mutex_unlock(&clocks_mutex);
- return clk;
-}
+ /* ensure none of the special function bits set */
+ clkcon &= ~(S3C2410_CLKCON_IDLE|S3C2410_CLKCON_POWER);
-void clk_put(struct clk *clk)
-{
- module_put(clk->owner);
-}
+ __raw_writel(clkcon, S3C2410_CLKCON);
-int clk_enable(struct clk *clk)
-{
- if (IS_ERR(clk) || clk == NULL)
- return -EINVAL;
-
- clk_enable(clk->parent);
-
- mutex_lock(&clocks_mutex);
-
- if ((clk->usage++) == 0)
- (clk->enable)(clk, 1);
-
- mutex_unlock(&clocks_mutex);
return 0;
}
-void clk_disable(struct clk *clk)
-{
- if (IS_ERR(clk) || clk == NULL)
- return;
-
- mutex_lock(&clocks_mutex);
-
- if ((--clk->usage) == 0)
- (clk->enable)(clk, 0);
-
- mutex_unlock(&clocks_mutex);
- clk_disable(clk->parent);
-}
-
-
-unsigned long clk_get_rate(struct clk *clk)
-{
- if (IS_ERR(clk))
- return 0;
-
- if (clk->rate != 0)
- return clk->rate;
-
- if (clk->get_rate != NULL)
- return (clk->get_rate)(clk);
-
- if (clk->parent != NULL)
- return clk_get_rate(clk->parent);
-
- return clk->rate;
-}
-
-long clk_round_rate(struct clk *clk, unsigned long rate)
-{
- if (!IS_ERR(clk) && clk->round_rate)
- return (clk->round_rate)(clk, rate);
-
- return rate;
-}
-
-int clk_set_rate(struct clk *clk, unsigned long rate)
-{
- int ret;
-
- if (IS_ERR(clk))
- return -EINVAL;
-
- mutex_lock(&clocks_mutex);
- ret = (clk->set_rate)(clk, rate);
- mutex_unlock(&clocks_mutex);
-
- return ret;
-}
-
-struct clk *clk_get_parent(struct clk *clk)
+static int s3c2410_upll_enable(struct clk *clk, int enable)
{
- return clk->parent;
-}
-
-int clk_set_parent(struct clk *clk, struct clk *parent)
-{
- int ret = 0;
-
- if (IS_ERR(clk))
- return -EINVAL;
-
- mutex_lock(&clocks_mutex);
-
- if (clk->set_parent)
- ret = (clk->set_parent)(clk, parent);
-
- mutex_unlock(&clocks_mutex);
-
- return ret;
-}
-
-EXPORT_SYMBOL(clk_get);
-EXPORT_SYMBOL(clk_put);
-EXPORT_SYMBOL(clk_enable);
-EXPORT_SYMBOL(clk_disable);
-EXPORT_SYMBOL(clk_get_rate);
-EXPORT_SYMBOL(clk_round_rate);
-EXPORT_SYMBOL(clk_set_rate);
-EXPORT_SYMBOL(clk_get_parent);
-EXPORT_SYMBOL(clk_set_parent);
-
-/* base clocks */
-
-struct clk clk_xtal = {
- .name = "xtal",
- .id = -1,
- .rate = 0,
- .parent = NULL,
- .ctrlbit = 0,
-};
-
-struct clk clk_mpll = {
- .name = "mpll",
- .id = -1,
-};
-
-struct clk clk_upll = {
- .name = "upll",
- .id = -1,
- .parent = NULL,
- .ctrlbit = 0,
-};
-
-struct clk clk_f = {
- .name = "fclk",
- .id = -1,
- .rate = 0,
- .parent = &clk_mpll,
- .ctrlbit = 0,
-};
-
-struct clk clk_h = {
- .name = "hclk",
- .id = -1,
- .rate = 0,
- .parent = NULL,
- .ctrlbit = 0,
-};
-
-struct clk clk_p = {
- .name = "pclk",
- .id = -1,
- .rate = 0,
- .parent = NULL,
- .ctrlbit = 0,
-};
-
-struct clk clk_usb_bus = {
- .name = "usb-bus",
- .id = -1,
- .rate = 0,
- .parent = &clk_upll,
-};
-
-/* clocks that could be registered by external code */
-
-static int s3c24xx_dclk_enable(struct clk *clk, int enable)
-{
- unsigned long dclkcon = __raw_readl(S3C24XX_DCLKCON);
+ unsigned long clkslow = __raw_readl(S3C2410_CLKSLOW);
+ unsigned long orig = clkslow;
if (enable)
- dclkcon |= clk->ctrlbit;
+ clkslow &= ~S3C2410_CLKSLOW_UCLK_OFF;
else
- dclkcon &= ~clk->ctrlbit;
+ clkslow |= S3C2410_CLKSLOW_UCLK_OFF;
- __raw_writel(dclkcon, S3C24XX_DCLKCON);
+ __raw_writel(clkslow, S3C2410_CLKSLOW);
- return 0;
-}
+ /* if we started the UPLL, then allow to settle */
-static int s3c24xx_dclk_setparent(struct clk *clk, struct clk *parent)
-{
- unsigned long dclkcon;
- unsigned int uclk;
-
- if (parent == &clk_upll)
- uclk = 1;
- else if (parent == &clk_p)
- uclk = 0;
- else
- return -EINVAL;
-
- clk->parent = parent;
-
- dclkcon = __raw_readl(S3C24XX_DCLKCON);
-
- if (clk->ctrlbit == S3C2410_DCLKCON_DCLK0EN) {
- if (uclk)
- dclkcon |= S3C2410_DCLKCON_DCLK0_UCLK;
- else
- dclkcon &= ~S3C2410_DCLKCON_DCLK0_UCLK;
- } else {
- if (uclk)
- dclkcon |= S3C2410_DCLKCON_DCLK1_UCLK;
- else
- dclkcon &= ~S3C2410_DCLKCON_DCLK1_UCLK;
- }
-
- __raw_writel(dclkcon, S3C24XX_DCLKCON);
+ if (enable && (orig & S3C2410_CLKSLOW_UCLK_OFF))
+ udelay(200);
return 0;
}
-
-static int s3c24xx_clkout_setparent(struct clk *clk, struct clk *parent)
-{
- unsigned long mask;
- unsigned long source;
-
- /* calculate the MISCCR setting for the clock */
-
- if (parent == &clk_xtal)
- source = S3C2410_MISCCR_CLK0_MPLL;
- else if (parent == &clk_upll)
- source = S3C2410_MISCCR_CLK0_UPLL;
- else if (parent == &clk_f)
- source = S3C2410_MISCCR_CLK0_FCLK;
- else if (parent == &clk_h)
- source = S3C2410_MISCCR_CLK0_HCLK;
- else if (parent == &clk_p)
- source = S3C2410_MISCCR_CLK0_PCLK;
- else if (clk == &s3c24xx_clkout0 && parent == &s3c24xx_dclk0)
- source = S3C2410_MISCCR_CLK0_DCLK0;
- else if (clk == &s3c24xx_clkout1 && parent == &s3c24xx_dclk1)
- source = S3C2410_MISCCR_CLK0_DCLK0;
- else
- return -EINVAL;
-
- clk->parent = parent;
-
- if (clk == &s3c24xx_dclk0)
- mask = S3C2410_MISCCR_CLK0_MASK;
- else {
- source <<= 4;
- mask = S3C2410_MISCCR_CLK1_MASK;
+/* standard clock definitions */
+
+static struct clk init_clocks_disable[] = {
+ {
+ .name = "nand",
+ .id = -1,
+ .parent = &clk_h,
+ .enable = s3c2410_clkcon_enable,
+ .ctrlbit = S3C2410_CLKCON_NAND,
+ }, {
+ .name = "sdi",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s3c2410_clkcon_enable,
+ .ctrlbit = S3C2410_CLKCON_SDI,
+ }, {
+ .name = "adc",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s3c2410_clkcon_enable,
+ .ctrlbit = S3C2410_CLKCON_ADC,
+ }, {
+ .name = "i2c",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s3c2410_clkcon_enable,
+ .ctrlbit = S3C2410_CLKCON_IIC,
+ }, {
+ .name = "iis",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s3c2410_clkcon_enable,
+ .ctrlbit = S3C2410_CLKCON_IIS,
+ }, {
+ .name = "spi",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s3c2410_clkcon_enable,
+ .ctrlbit = S3C2410_CLKCON_SPI,
}
-
- s3c2410_modify_misccr(mask, source);
- return 0;
-}
-
-/* external clock definitions */
-
-struct clk s3c24xx_dclk0 = {
- .name = "dclk0",
- .id = -1,
- .ctrlbit = S3C2410_DCLKCON_DCLK0EN,
- .enable = s3c24xx_dclk_enable,
- .set_parent = s3c24xx_dclk_setparent,
-};
-
-struct clk s3c24xx_dclk1 = {
- .name = "dclk1",
- .id = -1,
- .ctrlbit = S3C2410_DCLKCON_DCLK0EN,
- .enable = s3c24xx_dclk_enable,
- .set_parent = s3c24xx_dclk_setparent,
};
-struct clk s3c24xx_clkout0 = {
- .name = "clkout0",
- .id = -1,
- .set_parent = s3c24xx_clkout_setparent,
+static struct clk init_clocks[] = {
+ {
+ .name = "lcd",
+ .id = -1,
+ .parent = &clk_h,
+ .enable = s3c2410_clkcon_enable,
+ .ctrlbit = S3C2410_CLKCON_LCDC,
+ }, {
+ .name = "gpio",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s3c2410_clkcon_enable,
+ .ctrlbit = S3C2410_CLKCON_GPIO,
+ }, {
+ .name = "usb-host",
+ .id = -1,
+ .parent = &clk_h,
+ .enable = s3c2410_clkcon_enable,
+ .ctrlbit = S3C2410_CLKCON_USBH,
+ }, {
+ .name = "usb-device",
+ .id = -1,
+ .parent = &clk_h,
+ .enable = s3c2410_clkcon_enable,
+ .ctrlbit = S3C2410_CLKCON_USBD,
+ }, {
+ .name = "timers",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s3c2410_clkcon_enable,
+ .ctrlbit = S3C2410_CLKCON_PWMT,
+ }, {
+ .name = "uart",
+ .id = 0,
+ .parent = &clk_p,
+ .enable = s3c2410_clkcon_enable,
+ .ctrlbit = S3C2410_CLKCON_UART0,
+ }, {
+ .name = "uart",
+ .id = 1,
+ .parent = &clk_p,
+ .enable = s3c2410_clkcon_enable,
+ .ctrlbit = S3C2410_CLKCON_UART1,
+ }, {
+ .name = "uart",
+ .id = 2,
+ .parent = &clk_p,
+ .enable = s3c2410_clkcon_enable,
+ .ctrlbit = S3C2410_CLKCON_UART2,
+ }, {
+ .name = "rtc",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s3c2410_clkcon_enable,
+ .ctrlbit = S3C2410_CLKCON_RTC,
+ }, {
+ .name = "watchdog",
+ .id = -1,
+ .parent = &clk_p,
+ .ctrlbit = 0,
+ }, {
+ .name = "usb-bus-host",
+ .id = -1,
+ .parent = &clk_usb_bus,
+ }, {
+ .name = "usb-bus-gadget",
+ .id = -1,
+ .parent = &clk_usb_bus,
+ },
};
-struct clk s3c24xx_clkout1 = {
- .name = "clkout1",
- .id = -1,
- .set_parent = s3c24xx_clkout_setparent,
-};
-
-struct clk s3c24xx_uclk = {
- .name = "uclk",
- .id = -1,
-};
-
-/* initialise the clock system */
-
-int s3c24xx_register_clock(struct clk *clk)
-{
- clk->owner = THIS_MODULE;
-
- if (clk->enable == NULL)
- clk->enable = clk_null_enable;
-
- /* add to the list of available clocks */
-
- mutex_lock(&clocks_mutex);
- list_add(&clk->list, &clocks);
- mutex_unlock(&clocks_mutex);
-
- return 0;
-}
-
-/* initalise all the clocks */
+/* s3c2410_baseclk_add()
+ *
+ * Add all the clocks used by the s3c2410 or compatible CPUs
+ * such as the S3C2440 and S3C2442.
+ *
+ * We cannot use a system device as we are needed before any
+ * of the init-calls that initialise the devices are actually
+ * done.
+*/
-int __init s3c24xx_setup_clocks(unsigned long xtal,
- unsigned long fclk,
- unsigned long hclk,
- unsigned long pclk)
+int __init s3c2410_baseclk_add(void)
{
- printk(KERN_INFO "S3C24XX Clocks, (c) 2004 Simtec Electronics\n");
+ unsigned long clkslow = __raw_readl(S3C2410_CLKSLOW);
+ unsigned long clkcon = __raw_readl(S3C2410_CLKCON);
+ struct clk *clkp;
+ struct clk *xtal;
+ int ret;
+ int ptr;
- /* initialise the main system clocks */
+ clk_upll.enable = s3c2410_upll_enable;
- clk_xtal.rate = xtal;
- clk_upll.rate = s3c2410_get_pll(__raw_readl(S3C2410_UPLLCON), xtal);
+ if (s3c24xx_register_clock(&clk_usb_bus) < 0)
+ printk(KERN_ERR "failed to register usb bus clock\n");
- clk_mpll.rate = fclk;
- clk_h.rate = hclk;
- clk_p.rate = pclk;
- clk_f.rate = fclk;
+ /* register clocks from clock array */
- /* assume uart clocks are correctly setup */
+ clkp = init_clocks;
+ for (ptr = 0; ptr < ARRAY_SIZE(init_clocks); ptr++, clkp++) {
+ /* ensure that we note the clock state */
- /* register our clocks */
+ clkp->usage = clkcon & clkp->ctrlbit ? 1 : 0;
- if (s3c24xx_register_clock(&clk_xtal) < 0)
- printk(KERN_ERR "failed to register master xtal\n");
+ ret = s3c24xx_register_clock(clkp);
+ if (ret < 0) {
+ printk(KERN_ERR "Failed to register clock %s (%d)\n",
+ clkp->name, ret);
+ }
+ }
- if (s3c24xx_register_clock(&clk_mpll) < 0)
- printk(KERN_ERR "failed to register mpll clock\n");
+ /* We must be careful disabling the clocks we are not intending to
+ * be using at boot time, as subsytems such as the LCD which do
+ * their own DMA requests to the bus can cause the system to lockup
+ * if they where in the middle of requesting bus access.
+ *
+ * Disabling the LCD clock if the LCD is active is very dangerous,
+ * and therefore the bootloader should be careful to not enable
+ * the LCD clock if it is not needed.
+ */
+
+ /* install (and disable) the clocks we do not need immediately */
+
+ clkp = init_clocks_disable;
+ for (ptr = 0; ptr < ARRAY_SIZE(init_clocks_disable); ptr++, clkp++) {
+
+ ret = s3c24xx_register_clock(clkp);
+ if (ret < 0) {
+ printk(KERN_ERR "Failed to register clock %s (%d)\n",
+ clkp->name, ret);
+ }
- if (s3c24xx_register_clock(&clk_upll) < 0)
- printk(KERN_ERR "failed to register upll clock\n");
+ s3c2410_clkcon_enable(clkp, 0);
+ }
- if (s3c24xx_register_clock(&clk_f) < 0)
- printk(KERN_ERR "failed to register cpu fclk\n");
+ /* show the clock-slow value */
- if (s3c24xx_register_clock(&clk_h) < 0)
- printk(KERN_ERR "failed to register cpu hclk\n");
+ xtal = clk_get(NULL, "xtal");
- if (s3c24xx_register_clock(&clk_p) < 0)
- printk(KERN_ERR "failed to register cpu pclk\n");
+ printk("CLOCK: Slow mode (%ld.%ld MHz), %s, MPLL %s, UPLL %s\n",
+ print_mhz(clk_get_rate(xtal) /
+ ( 2 * S3C2410_CLKSLOW_GET_SLOWVAL(clkslow))),
+ (clkslow & S3C2410_CLKSLOW_SLOW) ? "slow" : "fast",
+ (clkslow & S3C2410_CLKSLOW_MPLL_OFF) ? "off" : "on",
+ (clkslow & S3C2410_CLKSLOW_UCLK_OFF) ? "off" : "on");
return 0;
}
/* linux/arch/arm/mach-s3c2410/dma.c
*
- * Copyright (c) 2003-2005,2006 Simtec Electronics
+ * Copyright (c) 2006 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
*
- * S3C2410 DMA core
+ * S3C2410 DMA selection
*
* http://armlinux.simtec.co.uk/
*
* published by the Free Software Foundation.
*/
-
-#ifdef CONFIG_S3C2410_DMA_DEBUG
-#define DEBUG
-#endif
-
-#include <linux/module.h>
+#include <linux/kernel.h>
#include <linux/init.h>
-#include <linux/sched.h>
-#include <linux/spinlock.h>
-#include <linux/interrupt.h>
#include <linux/sysdev.h>
-#include <linux/slab.h>
-#include <linux/errno.h>
-#include <linux/delay.h>
+#include <linux/serial_core.h>
-#include <asm/system.h>
-#include <asm/irq.h>
-#include <asm/hardware.h>
-#include <asm/io.h>
#include <asm/dma.h>
-
-#include <asm/mach/dma.h>
-#include <asm/arch/map.h>
-
-#include "dma.h"
-
-/* io map for dma */
-static void __iomem *dma_base;
-static struct kmem_cache *dma_kmem;
-
-struct s3c24xx_dma_selection dma_sel;
-
-/* dma channel state information */
-struct s3c2410_dma_chan s3c2410_chans[S3C2410_DMA_CHANNELS];
-
-/* debugging functions */
-
-#define BUF_MAGIC (0xcafebabe)
-
-#define dmawarn(fmt...) printk(KERN_DEBUG fmt)
-
-#define dma_regaddr(chan, reg) ((chan)->regs + (reg))
-
-#if 1
-#define dma_wrreg(chan, reg, val) writel((val), (chan)->regs + (reg))
-#else
-static inline void
-dma_wrreg(struct s3c2410_dma_chan *chan, int reg, unsigned long val)
-{
- pr_debug("writing %08x to register %08x\n",(unsigned int)val,reg);
- writel(val, dma_regaddr(chan, reg));
-}
-#endif
-
-#define dma_rdreg(chan, reg) readl((chan)->regs + (reg))
-
-/* captured register state for debug */
-
-struct s3c2410_dma_regstate {
- unsigned long dcsrc;
- unsigned long disrc;
- unsigned long dstat;
- unsigned long dcon;
- unsigned long dmsktrig;
+#include <asm/arch/dma.h>
+
+#include <asm/plat-s3c24xx/cpu.h>
+#include <asm/plat-s3c24xx/dma.h>
+
+#include <asm/arch/regs-serial.h>
+#include <asm/arch/regs-gpio.h>
+#include <asm/arch/regs-ac97.h>
+#include <asm/arch/regs-mem.h>
+#include <asm/arch/regs-lcd.h>
+#include <asm/arch/regs-sdi.h>
+#include <asm/arch/regs-iis.h>
+#include <asm/arch/regs-spi.h>
+
+static struct s3c24xx_dma_map __initdata s3c2410_dma_mappings[] = {
+ [DMACH_XD0] = {
+ .name = "xdreq0",
+ .channels[0] = S3C2410_DCON_CH0_XDREQ0 | DMA_CH_VALID,
+ },
+ [DMACH_XD1] = {
+ .name = "xdreq1",
+ .channels[1] = S3C2410_DCON_CH1_XDREQ1 | DMA_CH_VALID,
+ },
+ [DMACH_SDI] = {
+ .name = "sdi",
+ .channels[0] = S3C2410_DCON_CH0_SDI | DMA_CH_VALID,
+ .channels[2] = S3C2410_DCON_CH2_SDI | DMA_CH_VALID,
+ .channels[3] = S3C2410_DCON_CH3_SDI | DMA_CH_VALID,
+ .hw_addr.to = S3C2410_PA_IIS + S3C2410_IISFIFO,
+ .hw_addr.from = S3C2410_PA_IIS + S3C2410_IISFIFO,
+ },
+ [DMACH_SPI0] = {
+ .name = "spi0",
+ .channels[1] = S3C2410_DCON_CH1_SPI | DMA_CH_VALID,
+ .hw_addr.to = S3C2410_PA_SPI + S3C2410_SPTDAT,
+ .hw_addr.from = S3C2410_PA_SPI + S3C2410_SPRDAT,
+ },
+ [DMACH_SPI1] = {
+ .name = "spi1",
+ .channels[3] = S3C2410_DCON_CH3_SPI | DMA_CH_VALID,
+ .hw_addr.to = S3C2410_PA_SPI + 0x20 + S3C2410_SPTDAT,
+ .hw_addr.from = S3C2410_PA_SPI + 0x20 + S3C2410_SPRDAT,
+ },
+ [DMACH_UART0] = {
+ .name = "uart0",
+ .channels[0] = S3C2410_DCON_CH0_UART0 | DMA_CH_VALID,
+ .hw_addr.to = S3C2410_PA_UART0 + S3C2410_UTXH,
+ .hw_addr.from = S3C2410_PA_UART0 + S3C2410_URXH,
+ },
+ [DMACH_UART1] = {
+ .name = "uart1",
+ .channels[1] = S3C2410_DCON_CH1_UART1 | DMA_CH_VALID,
+ .hw_addr.to = S3C2410_PA_UART1 + S3C2410_UTXH,
+ .hw_addr.from = S3C2410_PA_UART1 + S3C2410_URXH,
+ },
+ [DMACH_UART2] = {
+ .name = "uart2",
+ .channels[3] = S3C2410_DCON_CH3_UART2 | DMA_CH_VALID,
+ .hw_addr.to = S3C2410_PA_UART2 + S3C2410_UTXH,
+ .hw_addr.from = S3C2410_PA_UART2 + S3C2410_URXH,
+ },
+ [DMACH_TIMER] = {
+ .name = "timer",
+ .channels[0] = S3C2410_DCON_CH0_TIMER | DMA_CH_VALID,
+ .channels[2] = S3C2410_DCON_CH2_TIMER | DMA_CH_VALID,
+ .channels[3] = S3C2410_DCON_CH3_TIMER | DMA_CH_VALID,
+ },
+ [DMACH_I2S_IN] = {
+ .name = "i2s-sdi",
+ .channels[1] = S3C2410_DCON_CH1_I2SSDI | DMA_CH_VALID,
+ .channels[2] = S3C2410_DCON_CH2_I2SSDI | DMA_CH_VALID,
+ .hw_addr.from = S3C2410_PA_IIS + S3C2410_IISFIFO,
+ },
+ [DMACH_I2S_OUT] = {
+ .name = "i2s-sdo",
+ .channels[2] = S3C2410_DCON_CH2_I2SSDO | DMA_CH_VALID,
+ .hw_addr.to = S3C2410_PA_IIS + S3C2410_IISFIFO,
+ },
+ [DMACH_USB_EP1] = {
+ .name = "usb-ep1",
+ .channels[0] = S3C2410_DCON_CH0_USBEP1 | DMA_CH_VALID,
+ },
+ [DMACH_USB_EP2] = {
+ .name = "usb-ep2",
+ .channels[1] = S3C2410_DCON_CH1_USBEP2 | DMA_CH_VALID,
+ },
+ [DMACH_USB_EP3] = {
+ .name = "usb-ep3",
+ .channels[2] = S3C2410_DCON_CH2_USBEP3 | DMA_CH_VALID,
+ },
+ [DMACH_USB_EP4] = {
+ .name = "usb-ep4",
+ .channels[3] =S3C2410_DCON_CH3_USBEP4 | DMA_CH_VALID,
+ },
};
-#ifdef CONFIG_S3C2410_DMA_DEBUG
-
-/* dmadbg_showregs
- *
- * simple debug routine to print the current state of the dma registers
-*/
-
-static void
-dmadbg_capture(struct s3c2410_dma_chan *chan, struct s3c2410_dma_regstate *regs)
-{
- regs->dcsrc = dma_rdreg(chan, S3C2410_DMA_DCSRC);
- regs->disrc = dma_rdreg(chan, S3C2410_DMA_DISRC);
- regs->dstat = dma_rdreg(chan, S3C2410_DMA_DSTAT);
- regs->dcon = dma_rdreg(chan, S3C2410_DMA_DCON);
- regs->dmsktrig = dma_rdreg(chan, S3C2410_DMA_DMASKTRIG);
-}
-
-static void
-dmadbg_dumpregs(const char *fname, int line, struct s3c2410_dma_chan *chan,
- struct s3c2410_dma_regstate *regs)
-{
- printk(KERN_DEBUG "dma%d: %s:%d: DCSRC=%08lx, DISRC=%08lx, DSTAT=%08lx DMT=%02lx, DCON=%08lx\n",
- chan->number, fname, line,
- regs->dcsrc, regs->disrc, regs->dstat, regs->dmsktrig,
- regs->dcon);
-}
-
-static void
-dmadbg_showchan(const char *fname, int line, struct s3c2410_dma_chan *chan)
-{
- struct s3c2410_dma_regstate state;
-
- dmadbg_capture(chan, &state);
-
- printk(KERN_DEBUG "dma%d: %s:%d: ls=%d, cur=%p, %p %p\n",
- chan->number, fname, line, chan->load_state,
- chan->curr, chan->next, chan->end);
-
- dmadbg_dumpregs(fname, line, chan, &state);
-}
-
-static void
-dmadbg_showregs(const char *fname, int line, struct s3c2410_dma_chan *chan)
-{
- struct s3c2410_dma_regstate state;
-
- dmadbg_capture(chan, &state);
- dmadbg_dumpregs(fname, line, chan, &state);
-}
-
-#define dbg_showregs(chan) dmadbg_showregs(__FUNCTION__, __LINE__, (chan))
-#define dbg_showchan(chan) dmadbg_showchan(__FUNCTION__, __LINE__, (chan))
-#else
-#define dbg_showregs(chan) do { } while(0)
-#define dbg_showchan(chan) do { } while(0)
-#endif /* CONFIG_S3C2410_DMA_DEBUG */
-
-static struct s3c2410_dma_chan *dma_chan_map[DMACH_MAX];
-
-/* lookup_dma_channel
- *
- * change the dma channel number given into a real dma channel id
-*/
-
-static struct s3c2410_dma_chan *lookup_dma_channel(unsigned int channel)
-{
- if (channel & DMACH_LOW_LEVEL)
- return &s3c2410_chans[channel & ~DMACH_LOW_LEVEL];
- else
- return dma_chan_map[channel];
-}
-
-/* s3c2410_dma_stats_timeout
- *
- * Update DMA stats from timeout info
-*/
-
-static void
-s3c2410_dma_stats_timeout(struct s3c2410_dma_stats *stats, int val)
+static void s3c2410_dma_select(struct s3c2410_dma_chan *chan,
+ struct s3c24xx_dma_map *map)
{
- if (stats == NULL)
- return;
-
- if (val > stats->timeout_longest)
- stats->timeout_longest = val;
- if (val < stats->timeout_shortest)
- stats->timeout_shortest = val;
-
- stats->timeout_avg += val;
+ chan->dcon = map->channels[chan->number] & ~DMA_CH_VALID;
}
-/* s3c2410_dma_waitforload
- *
- * wait for the DMA engine to load a buffer, and update the state accordingly
-*/
-
-static int
-s3c2410_dma_waitforload(struct s3c2410_dma_chan *chan, int line)
-{
- int timeout = chan->load_timeout;
- int took;
-
- if (chan->load_state != S3C2410_DMALOAD_1LOADED) {
- printk(KERN_ERR "dma%d: s3c2410_dma_waitforload() called in loadstate %d from line %d\n", chan->number, chan->load_state, line);
- return 0;
- }
-
- if (chan->stats != NULL)
- chan->stats->loads++;
-
- while (--timeout > 0) {
- if ((dma_rdreg(chan, S3C2410_DMA_DSTAT) << (32-20)) != 0) {
- took = chan->load_timeout - timeout;
-
- s3c2410_dma_stats_timeout(chan->stats, took);
-
- switch (chan->load_state) {
- case S3C2410_DMALOAD_1LOADED:
- chan->load_state = S3C2410_DMALOAD_1RUNNING;
- break;
-
- default:
- printk(KERN_ERR "dma%d: unknown load_state in s3c2410_dma_waitforload() %d\n", chan->number, chan->load_state);
- }
-
- return 1;
- }
- }
-
- if (chan->stats != NULL) {
- chan->stats->timeout_failed++;
- }
-
- return 0;
-}
-
-
-
-/* s3c2410_dma_loadbuffer
- *
- * load a buffer, and update the channel state
-*/
-
-static inline int
-s3c2410_dma_loadbuffer(struct s3c2410_dma_chan *chan,
- struct s3c2410_dma_buf *buf)
-{
- unsigned long reload;
-
- pr_debug("s3c2410_chan_loadbuffer: loading buff %p (0x%08lx,0x%06x)\n",
- buf, (unsigned long)buf->data, buf->size);
-
- if (buf == NULL) {
- dmawarn("buffer is NULL\n");
- return -EINVAL;
- }
-
- /* check the state of the channel before we do anything */
-
- if (chan->load_state == S3C2410_DMALOAD_1LOADED) {
- dmawarn("load_state is S3C2410_DMALOAD_1LOADED\n");
- }
-
- if (chan->load_state == S3C2410_DMALOAD_1LOADED_1RUNNING) {
- dmawarn("state is S3C2410_DMALOAD_1LOADED_1RUNNING\n");
- }
-
- /* it would seem sensible if we are the last buffer to not bother
- * with the auto-reload bit, so that the DMA engine will not try
- * and load another transfer after this one has finished...
- */
- if (chan->load_state == S3C2410_DMALOAD_NONE) {
- pr_debug("load_state is none, checking for noreload (next=%p)\n",
- buf->next);
- reload = (buf->next == NULL) ? S3C2410_DCON_NORELOAD : 0;
- } else {
- //pr_debug("load_state is %d => autoreload\n", chan->load_state);
- reload = S3C2410_DCON_AUTORELOAD;
- }
-
- if ((buf->data & 0xf0000000) != 0x30000000) {
- dmawarn("dmaload: buffer is %p\n", (void *)buf->data);
- }
-
- writel(buf->data, chan->addr_reg);
-
- dma_wrreg(chan, S3C2410_DMA_DCON,
- chan->dcon | reload | (buf->size/chan->xfer_unit));
-
- chan->next = buf->next;
-
- /* update the state of the channel */
-
- switch (chan->load_state) {
- case S3C2410_DMALOAD_NONE:
- chan->load_state = S3C2410_DMALOAD_1LOADED;
- break;
-
- case S3C2410_DMALOAD_1RUNNING:
- chan->load_state = S3C2410_DMALOAD_1LOADED_1RUNNING;
- break;
-
- default:
- dmawarn("dmaload: unknown state %d in loadbuffer\n",
- chan->load_state);
- break;
- }
-
- return 0;
-}
-
-/* s3c2410_dma_call_op
- *
- * small routine to call the op routine with the given op if it has been
- * registered
-*/
-
-static void
-s3c2410_dma_call_op(struct s3c2410_dma_chan *chan, enum s3c2410_chan_op op)
-{
- if (chan->op_fn != NULL) {
- (chan->op_fn)(chan, op);
- }
-}
-
-/* s3c2410_dma_buffdone
- *
- * small wrapper to check if callback routine needs to be called, and
- * if so, call it
-*/
-
-static inline void
-s3c2410_dma_buffdone(struct s3c2410_dma_chan *chan, struct s3c2410_dma_buf *buf,
- enum s3c2410_dma_buffresult result)
-{
-#if 0
- pr_debug("callback_fn=%p, buf=%p, id=%p, size=%d, result=%d\n",
- chan->callback_fn, buf, buf->id, buf->size, result);
-#endif
-
- if (chan->callback_fn != NULL) {
- (chan->callback_fn)(chan, buf->id, buf->size, result);
- }
-}
-
-/* s3c2410_dma_start
- *
- * start a dma channel going
-*/
-
-static int s3c2410_dma_start(struct s3c2410_dma_chan *chan)
-{
- unsigned long tmp;
- unsigned long flags;
-
- pr_debug("s3c2410_start_dma: channel=%d\n", chan->number);
-
- local_irq_save(flags);
-
- if (chan->state == S3C2410_DMA_RUNNING) {
- pr_debug("s3c2410_start_dma: already running (%d)\n", chan->state);
- local_irq_restore(flags);
- return 0;
- }
-
- chan->state = S3C2410_DMA_RUNNING;
-
- /* check wether there is anything to load, and if not, see
- * if we can find anything to load
- */
-
- if (chan->load_state == S3C2410_DMALOAD_NONE) {
- if (chan->next == NULL) {
- printk(KERN_ERR "dma%d: channel has nothing loaded\n",
- chan->number);
- chan->state = S3C2410_DMA_IDLE;
- local_irq_restore(flags);
- return -EINVAL;
- }
-
- s3c2410_dma_loadbuffer(chan, chan->next);
- }
-
- dbg_showchan(chan);
-
- /* enable the channel */
-
- if (!chan->irq_enabled) {
- enable_irq(chan->irq);
- chan->irq_enabled = 1;
- }
-
- /* start the channel going */
-
- tmp = dma_rdreg(chan, S3C2410_DMA_DMASKTRIG);
- tmp &= ~S3C2410_DMASKTRIG_STOP;
- tmp |= S3C2410_DMASKTRIG_ON;
- dma_wrreg(chan, S3C2410_DMA_DMASKTRIG, tmp);
-
- pr_debug("dma%d: %08lx to DMASKTRIG\n", chan->number, tmp);
-
-#if 0
- /* the dma buffer loads should take care of clearing the AUTO
- * reloading feature */
- tmp = dma_rdreg(chan, S3C2410_DMA_DCON);
- tmp &= ~S3C2410_DCON_NORELOAD;
- dma_wrreg(chan, S3C2410_DMA_DCON, tmp);
-#endif
-
- s3c2410_dma_call_op(chan, S3C2410_DMAOP_START);
-
- dbg_showchan(chan);
-
- /* if we've only loaded one buffer onto the channel, then chec
- * to see if we have another, and if so, try and load it so when
- * the first buffer is finished, the new one will be loaded onto
- * the channel */
-
- if (chan->next != NULL) {
- if (chan->load_state == S3C2410_DMALOAD_1LOADED) {
-
- if (s3c2410_dma_waitforload(chan, __LINE__) == 0) {
- pr_debug("%s: buff not yet loaded, no more todo\n",
- __FUNCTION__);
- } else {
- chan->load_state = S3C2410_DMALOAD_1RUNNING;
- s3c2410_dma_loadbuffer(chan, chan->next);
- }
-
- } else if (chan->load_state == S3C2410_DMALOAD_1RUNNING) {
- s3c2410_dma_loadbuffer(chan, chan->next);
- }
- }
-
-
- local_irq_restore(flags);
-
- return 0;
-}
-
-/* s3c2410_dma_canload
- *
- * work out if we can queue another buffer into the DMA engine
-*/
-
-static int
-s3c2410_dma_canload(struct s3c2410_dma_chan *chan)
-{
- if (chan->load_state == S3C2410_DMALOAD_NONE ||
- chan->load_state == S3C2410_DMALOAD_1RUNNING)
- return 1;
-
- return 0;
-}
-
-/* s3c2410_dma_enqueue
- *
- * queue an given buffer for dma transfer.
- *
- * id the device driver's id information for this buffer
- * data the physical address of the buffer data
- * size the size of the buffer in bytes
- *
- * If the channel is not running, then the flag S3C2410_DMAF_AUTOSTART
- * is checked, and if set, the channel is started. If this flag isn't set,
- * then an error will be returned.
- *
- * It is possible to queue more than one DMA buffer onto a channel at
- * once, and the code will deal with the re-loading of the next buffer
- * when necessary.
-*/
-
-int s3c2410_dma_enqueue(unsigned int channel, void *id,
- dma_addr_t data, int size)
-{
- struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
- struct s3c2410_dma_buf *buf;
- unsigned long flags;
-
- if (chan == NULL)
- return -EINVAL;
-
- pr_debug("%s: id=%p, data=%08x, size=%d\n",
- __FUNCTION__, id, (unsigned int)data, size);
-
- buf = kmem_cache_alloc(dma_kmem, GFP_ATOMIC);
- if (buf == NULL) {
- pr_debug("%s: out of memory (%ld alloc)\n",
- __FUNCTION__, (long)sizeof(*buf));
- return -ENOMEM;
- }
-
- //pr_debug("%s: new buffer %p\n", __FUNCTION__, buf);
- //dbg_showchan(chan);
-
- buf->next = NULL;
- buf->data = buf->ptr = data;
- buf->size = size;
- buf->id = id;
- buf->magic = BUF_MAGIC;
-
- local_irq_save(flags);
-
- if (chan->curr == NULL) {
- /* we've got nothing loaded... */
- pr_debug("%s: buffer %p queued onto empty channel\n",
- __FUNCTION__, buf);
-
- chan->curr = buf;
- chan->end = buf;
- chan->next = NULL;
- } else {
- pr_debug("dma%d: %s: buffer %p queued onto non-empty channel\n",
- chan->number, __FUNCTION__, buf);
-
- if (chan->end == NULL)
- pr_debug("dma%d: %s: %p not empty, and chan->end==NULL?\n",
- chan->number, __FUNCTION__, chan);
-
- chan->end->next = buf;
- chan->end = buf;
- }
-
- /* if necessary, update the next buffer field */
- if (chan->next == NULL)
- chan->next = buf;
-
- /* check to see if we can load a buffer */
- if (chan->state == S3C2410_DMA_RUNNING) {
- if (chan->load_state == S3C2410_DMALOAD_1LOADED && 1) {
- if (s3c2410_dma_waitforload(chan, __LINE__) == 0) {
- printk(KERN_ERR "dma%d: loadbuffer:"
- "timeout loading buffer\n",
- chan->number);
- dbg_showchan(chan);
- local_irq_restore(flags);
- return -EINVAL;
- }
- }
-
- while (s3c2410_dma_canload(chan) && chan->next != NULL) {
- s3c2410_dma_loadbuffer(chan, chan->next);
- }
- } else if (chan->state == S3C2410_DMA_IDLE) {
- if (chan->flags & S3C2410_DMAF_AUTOSTART) {
- s3c2410_dma_ctrl(chan->number, S3C2410_DMAOP_START);
- }
- }
-
- local_irq_restore(flags);
- return 0;
-}
-
-EXPORT_SYMBOL(s3c2410_dma_enqueue);
-
-static inline void
-s3c2410_dma_freebuf(struct s3c2410_dma_buf *buf)
-{
- int magicok = (buf->magic == BUF_MAGIC);
-
- buf->magic = -1;
-
- if (magicok) {
- kmem_cache_free(dma_kmem, buf);
- } else {
- printk("s3c2410_dma_freebuf: buff %p with bad magic\n", buf);
- }
-}
-
-/* s3c2410_dma_lastxfer
- *
- * called when the system is out of buffers, to ensure that the channel
- * is prepared for shutdown.
-*/
-
-static inline void
-s3c2410_dma_lastxfer(struct s3c2410_dma_chan *chan)
-{
-#if 0
- pr_debug("dma%d: s3c2410_dma_lastxfer: load_state %d\n",
- chan->number, chan->load_state);
-#endif
-
- switch (chan->load_state) {
- case S3C2410_DMALOAD_NONE:
- break;
-
- case S3C2410_DMALOAD_1LOADED:
- if (s3c2410_dma_waitforload(chan, __LINE__) == 0) {
- /* flag error? */
- printk(KERN_ERR "dma%d: timeout waiting for load (%s)\n",
- chan->number, __FUNCTION__);
- return;
- }
- break;
-
- case S3C2410_DMALOAD_1LOADED_1RUNNING:
- /* I belive in this case we do not have anything to do
- * until the next buffer comes along, and we turn off the
- * reload */
- return;
-
- default:
- pr_debug("dma%d: lastxfer: unhandled load_state %d with no next\n",
- chan->number, chan->load_state);
- return;
-
- }
-
- /* hopefully this'll shut the damned thing up after the transfer... */
- dma_wrreg(chan, S3C2410_DMA_DCON, chan->dcon | S3C2410_DCON_NORELOAD);
-}
-
-
-#define dmadbg2(x...)
-
-static irqreturn_t
-s3c2410_dma_irq(int irq, void *devpw)
-{
- struct s3c2410_dma_chan *chan = (struct s3c2410_dma_chan *)devpw;
- struct s3c2410_dma_buf *buf;
-
- buf = chan->curr;
-
- dbg_showchan(chan);
-
- /* modify the channel state */
-
- switch (chan->load_state) {
- case S3C2410_DMALOAD_1RUNNING:
- /* TODO - if we are running only one buffer, we probably
- * want to reload here, and then worry about the buffer
- * callback */
-
- chan->load_state = S3C2410_DMALOAD_NONE;
- break;
-
- case S3C2410_DMALOAD_1LOADED:
- /* iirc, we should go back to NONE loaded here, we
- * had a buffer, and it was never verified as being
- * loaded.
- */
-
- chan->load_state = S3C2410_DMALOAD_NONE;
- break;
-
- case S3C2410_DMALOAD_1LOADED_1RUNNING:
- /* we'll worry about checking to see if another buffer is
- * ready after we've called back the owner. This should
- * ensure we do not wait around too long for the DMA
- * engine to start the next transfer
- */
-
- chan->load_state = S3C2410_DMALOAD_1LOADED;
- break;
-
- case S3C2410_DMALOAD_NONE:
- printk(KERN_ERR "dma%d: IRQ with no loaded buffer?\n",
- chan->number);
- break;
-
- default:
- printk(KERN_ERR "dma%d: IRQ in invalid load_state %d\n",
- chan->number, chan->load_state);
- break;
- }
-
- if (buf != NULL) {
- /* update the chain to make sure that if we load any more
- * buffers when we call the callback function, things should
- * work properly */
-
- chan->curr = buf->next;
- buf->next = NULL;
-
- if (buf->magic != BUF_MAGIC) {
- printk(KERN_ERR "dma%d: %s: buf %p incorrect magic\n",
- chan->number, __FUNCTION__, buf);
- return IRQ_HANDLED;
- }
-
- s3c2410_dma_buffdone(chan, buf, S3C2410_RES_OK);
-
- /* free resouces */
- s3c2410_dma_freebuf(buf);
- } else {
- }
-
- /* only reload if the channel is still running... our buffer done
- * routine may have altered the state by requesting the dma channel
- * to stop or shutdown... */
-
- /* todo: check that when the channel is shut-down from inside this
- * function, we cope with unsetting reload, etc */
-
- if (chan->next != NULL && chan->state != S3C2410_DMA_IDLE) {
- unsigned long flags;
-
- switch (chan->load_state) {
- case S3C2410_DMALOAD_1RUNNING:
- /* don't need to do anything for this state */
- break;
-
- case S3C2410_DMALOAD_NONE:
- /* can load buffer immediately */
- break;
-
- case S3C2410_DMALOAD_1LOADED:
- if (s3c2410_dma_waitforload(chan, __LINE__) == 0) {
- /* flag error? */
- printk(KERN_ERR "dma%d: timeout waiting for load (%s)\n",
- chan->number, __FUNCTION__);
- return IRQ_HANDLED;
- }
-
- break;
-
- case S3C2410_DMALOAD_1LOADED_1RUNNING:
- goto no_load;
-
- default:
- printk(KERN_ERR "dma%d: unknown load_state in irq, %d\n",
- chan->number, chan->load_state);
- return IRQ_HANDLED;
- }
-
- local_irq_save(flags);
- s3c2410_dma_loadbuffer(chan, chan->next);
- local_irq_restore(flags);
- } else {
- s3c2410_dma_lastxfer(chan);
-
- /* see if we can stop this channel.. */
- if (chan->load_state == S3C2410_DMALOAD_NONE) {
- pr_debug("dma%d: end of transfer, stopping channel (%ld)\n",
- chan->number, jiffies);
- s3c2410_dma_ctrl(chan->number | DMACH_LOW_LEVEL,
- S3C2410_DMAOP_STOP);
- }
- }
-
- no_load:
- return IRQ_HANDLED;
-}
-
-static struct s3c2410_dma_chan *s3c2410_dma_map_channel(int channel);
-
-/* s3c2410_request_dma
- *
- * get control of an dma channel
-*/
-
-int s3c2410_dma_request(unsigned int channel,
- struct s3c2410_dma_client *client,
- void *dev)
-{
- struct s3c2410_dma_chan *chan;
- unsigned long flags;
- int err;
-
- pr_debug("dma%d: s3c2410_request_dma: client=%s, dev=%p\n",
- channel, client->name, dev);
-
- local_irq_save(flags);
-
- chan = s3c2410_dma_map_channel(channel);
- if (chan == NULL) {
- local_irq_restore(flags);
- return -EBUSY;
- }
-
- dbg_showchan(chan);
-
- chan->client = client;
- chan->in_use = 1;
-
- if (!chan->irq_claimed) {
- pr_debug("dma%d: %s : requesting irq %d\n",
- channel, __FUNCTION__, chan->irq);
-
- chan->irq_claimed = 1;
- local_irq_restore(flags);
-
- err = request_irq(chan->irq, s3c2410_dma_irq, IRQF_DISABLED,
- client->name, (void *)chan);
-
- local_irq_save(flags);
-
- if (err) {
- chan->in_use = 0;
- chan->irq_claimed = 0;
- local_irq_restore(flags);
-
- printk(KERN_ERR "%s: cannot get IRQ %d for DMA %d\n",
- client->name, chan->irq, chan->number);
- return err;
- }
-
- chan->irq_enabled = 1;
- }
-
- local_irq_restore(flags);
-
- /* need to setup */
-
- pr_debug("%s: channel initialised, %p\n", __FUNCTION__, chan);
-
- return 0;
-}
-
-EXPORT_SYMBOL(s3c2410_dma_request);
+static struct s3c24xx_dma_selection __initdata s3c2410_dma_sel = {
+ .select = s3c2410_dma_select,
+ .dcon_mask = 7 << 24,
+ .map = s3c2410_dma_mappings,
+ .map_size = ARRAY_SIZE(s3c2410_dma_mappings),
+};
-/* s3c2410_dma_free
- *
- * release the given channel back to the system, will stop and flush
- * any outstanding transfers, and ensure the channel is ready for the
- * next claimant.
- *
- * Note, although a warning is currently printed if the freeing client
- * info is not the same as the registrant's client info, the free is still
- * allowed to go through.
-*/
+static struct s3c24xx_dma_order __initdata s3c2410_dma_order = {
+ .channels = {
+ [DMACH_SDI] = {
+ .list = {
+ [0] = 3 | DMA_CH_VALID,
+ [1] = 2 | DMA_CH_VALID,
+ [2] = 0 | DMA_CH_VALID,
+ },
+ },
+ [DMACH_I2S_IN] = {
+ .list = {
+ [0] = 1 | DMA_CH_VALID,
+ [1] = 2 | DMA_CH_VALID,
+ },
+ },
+ },
+};
-int s3c2410_dma_free(dmach_t channel, struct s3c2410_dma_client *client)
+static int s3c2410_dma_add(struct sys_device *sysdev)
{
- struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
- unsigned long flags;
-
- if (chan == NULL)
- return -EINVAL;
-
- local_irq_save(flags);
-
- if (chan->client != client) {
- printk(KERN_WARNING "dma%d: possible free from different client (channel %p, passed %p)\n",
- channel, chan->client, client);
- }
-
- /* sort out stopping and freeing the channel */
-
- if (chan->state != S3C2410_DMA_IDLE) {
- pr_debug("%s: need to stop dma channel %p\n",
- __FUNCTION__, chan);
-
- /* possibly flush the channel */
- s3c2410_dma_ctrl(channel, S3C2410_DMAOP_STOP);
- }
-
- chan->client = NULL;
- chan->in_use = 0;
-
- if (chan->irq_claimed)
- free_irq(chan->irq, (void *)chan);
-
- chan->irq_claimed = 0;
-
- if (!(channel & DMACH_LOW_LEVEL))
- dma_chan_map[channel] = NULL;
-
- local_irq_restore(flags);
-
- return 0;
+ s3c2410_dma_init();
+ s3c24xx_dma_order_set(&s3c2410_dma_order);
+ return s3c24xx_dma_init_map(&s3c2410_dma_sel);
}
-EXPORT_SYMBOL(s3c2410_dma_free);
-
-static int s3c2410_dma_dostop(struct s3c2410_dma_chan *chan)
-{
- unsigned long flags;
- unsigned long tmp;
-
- pr_debug("%s:\n", __FUNCTION__);
-
- dbg_showchan(chan);
-
- local_irq_save(flags);
-
- s3c2410_dma_call_op(chan, S3C2410_DMAOP_STOP);
-
- tmp = dma_rdreg(chan, S3C2410_DMA_DMASKTRIG);
- tmp |= S3C2410_DMASKTRIG_STOP;
- //tmp &= ~S3C2410_DMASKTRIG_ON;
- dma_wrreg(chan, S3C2410_DMA_DMASKTRIG, tmp);
-
-#if 0
- /* should also clear interrupts, according to WinCE BSP */
- tmp = dma_rdreg(chan, S3C2410_DMA_DCON);
- tmp |= S3C2410_DCON_NORELOAD;
- dma_wrreg(chan, S3C2410_DMA_DCON, tmp);
-#endif
-
- /* should stop do this, or should we wait for flush? */
- chan->state = S3C2410_DMA_IDLE;
- chan->load_state = S3C2410_DMALOAD_NONE;
-
- local_irq_restore(flags);
-
- return 0;
-}
+#if defined(CONFIG_CPU_S3C2410)
+static struct sysdev_driver s3c2410_dma_driver = {
+ .add = s3c2410_dma_add,
+};
-void s3c2410_dma_waitforstop(struct s3c2410_dma_chan *chan)
+static int __init s3c2410_dma_drvinit(void)
{
- unsigned long tmp;
- unsigned int timeout = 0x10000;
-
- while (timeout-- > 0) {
- tmp = dma_rdreg(chan, S3C2410_DMA_DMASKTRIG);
-
- if (!(tmp & S3C2410_DMASKTRIG_ON))
- return;
- }
-
- pr_debug("dma%d: failed to stop?\n", chan->number);
+ return sysdev_driver_register(&s3c2410_sysclass, &s3c2410_dma_driver);
}
-
-/* s3c2410_dma_flush
- *
- * stop the channel, and remove all current and pending transfers
-*/
-
-static int s3c2410_dma_flush(struct s3c2410_dma_chan *chan)
-{
- struct s3c2410_dma_buf *buf, *next;
- unsigned long flags;
-
- pr_debug("%s: chan %p (%d)\n", __FUNCTION__, chan, chan->number);
-
- dbg_showchan(chan);
-
- local_irq_save(flags);
-
- if (chan->state != S3C2410_DMA_IDLE) {
- pr_debug("%s: stopping channel...\n", __FUNCTION__ );
- s3c2410_dma_ctrl(chan->number, S3C2410_DMAOP_STOP);
- }
-
- buf = chan->curr;
- if (buf == NULL)
- buf = chan->next;
-
- chan->curr = chan->next = chan->end = NULL;
-
- if (buf != NULL) {
- for ( ; buf != NULL; buf = next) {
- next = buf->next;
-
- pr_debug("%s: free buffer %p, next %p\n",
- __FUNCTION__, buf, buf->next);
-
- s3c2410_dma_buffdone(chan, buf, S3C2410_RES_ABORT);
- s3c2410_dma_freebuf(buf);
- }
- }
-
- dbg_showregs(chan);
-
- s3c2410_dma_waitforstop(chan);
-
-#if 0
- /* should also clear interrupts, according to WinCE BSP */
- {
- unsigned long tmp;
-
- tmp = dma_rdreg(chan, S3C2410_DMA_DCON);
- tmp |= S3C2410_DCON_NORELOAD;
- dma_wrreg(chan, S3C2410_DMA_DCON, tmp);
- }
+arch_initcall(s3c2410_dma_drvinit);
#endif
- dbg_showregs(chan);
-
- local_irq_restore(flags);
-
- return 0;
-}
-
-int
-s3c2410_dma_started(struct s3c2410_dma_chan *chan)
-{
- unsigned long flags;
-
- local_irq_save(flags);
-
- dbg_showchan(chan);
-
- /* if we've only loaded one buffer onto the channel, then chec
- * to see if we have another, and if so, try and load it so when
- * the first buffer is finished, the new one will be loaded onto
- * the channel */
-
- if (chan->next != NULL) {
- if (chan->load_state == S3C2410_DMALOAD_1LOADED) {
-
- if (s3c2410_dma_waitforload(chan, __LINE__) == 0) {
- pr_debug("%s: buff not yet loaded, no more todo\n",
- __FUNCTION__);
- } else {
- chan->load_state = S3C2410_DMALOAD_1RUNNING;
- s3c2410_dma_loadbuffer(chan, chan->next);
- }
-
- } else if (chan->load_state == S3C2410_DMALOAD_1RUNNING) {
- s3c2410_dma_loadbuffer(chan, chan->next);
- }
- }
-
-
- local_irq_restore(flags);
-
- return 0;
-
-}
-
-int
-s3c2410_dma_ctrl(dmach_t channel, enum s3c2410_chan_op op)
-{
- struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
-
- if (chan == NULL)
- return -EINVAL;
-
- switch (op) {
- case S3C2410_DMAOP_START:
- return s3c2410_dma_start(chan);
-
- case S3C2410_DMAOP_STOP:
- return s3c2410_dma_dostop(chan);
-
- case S3C2410_DMAOP_PAUSE:
- case S3C2410_DMAOP_RESUME:
- return -ENOENT;
-
- case S3C2410_DMAOP_FLUSH:
- return s3c2410_dma_flush(chan);
-
- case S3C2410_DMAOP_STARTED:
- return s3c2410_dma_started(chan);
-
- case S3C2410_DMAOP_TIMEOUT:
- return 0;
-
- }
-
- return -ENOENT; /* unknown, don't bother */
-}
-
-EXPORT_SYMBOL(s3c2410_dma_ctrl);
-
-/* DMA configuration for each channel
- *
- * DISRCC -> source of the DMA (AHB,APB)
- * DISRC -> source address of the DMA
- * DIDSTC -> destination of the DMA (AHB,APD)
- * DIDST -> destination address of the DMA
-*/
-
-/* s3c2410_dma_config
- *
- * xfersize: size of unit in bytes (1,2,4)
- * dcon: base value of the DCONx register
-*/
-
-int s3c2410_dma_config(dmach_t channel,
- int xferunit,
- int dcon)
-{
- struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
-
- pr_debug("%s: chan=%d, xfer_unit=%d, dcon=%08x\n",
- __FUNCTION__, channel, xferunit, dcon);
-
- if (chan == NULL)
- return -EINVAL;
-
- pr_debug("%s: Initial dcon is %08x\n", __FUNCTION__, dcon);
-
- dcon |= chan->dcon & dma_sel.dcon_mask;
-
- pr_debug("%s: New dcon is %08x\n", __FUNCTION__, dcon);
-
- switch (xferunit) {
- case 1:
- dcon |= S3C2410_DCON_BYTE;
- break;
-
- case 2:
- dcon |= S3C2410_DCON_HALFWORD;
- break;
-
- case 4:
- dcon |= S3C2410_DCON_WORD;
- break;
-
- default:
- pr_debug("%s: bad transfer size %d\n", __FUNCTION__, xferunit);
- return -EINVAL;
- }
-
- dcon |= S3C2410_DCON_HWTRIG;
- dcon |= S3C2410_DCON_INTREQ;
-
- pr_debug("%s: dcon now %08x\n", __FUNCTION__, dcon);
-
- chan->dcon = dcon;
- chan->xfer_unit = xferunit;
-
- return 0;
-}
-
-EXPORT_SYMBOL(s3c2410_dma_config);
-
-int s3c2410_dma_setflags(dmach_t channel, unsigned int flags)
-{
- struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
-
- if (chan == NULL)
- return -EINVAL;
-
- pr_debug("%s: chan=%p, flags=%08x\n", __FUNCTION__, chan, flags);
-
- chan->flags = flags;
-
- return 0;
-}
-
-EXPORT_SYMBOL(s3c2410_dma_setflags);
-
-
-/* do we need to protect the settings of the fields from
- * irq?
-*/
-
-int s3c2410_dma_set_opfn(dmach_t channel, s3c2410_dma_opfn_t rtn)
-{
- struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
-
- if (chan == NULL)
- return -EINVAL;
-
- pr_debug("%s: chan=%p, op rtn=%p\n", __FUNCTION__, chan, rtn);
-
- chan->op_fn = rtn;
-
- return 0;
-}
-
-EXPORT_SYMBOL(s3c2410_dma_set_opfn);
-
-int s3c2410_dma_set_buffdone_fn(dmach_t channel, s3c2410_dma_cbfn_t rtn)
-{
- struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
-
- if (chan == NULL)
- return -EINVAL;
-
- pr_debug("%s: chan=%p, callback rtn=%p\n", __FUNCTION__, chan, rtn);
-
- chan->callback_fn = rtn;
-
- return 0;
-}
-
-EXPORT_SYMBOL(s3c2410_dma_set_buffdone_fn);
-
-/* s3c2410_dma_devconfig
- *
- * configure the dma source/destination hardware type and address
- *
- * source: S3C2410_DMASRC_HW: source is hardware
- * S3C2410_DMASRC_MEM: source is memory
- *
- * hwcfg: the value for xxxSTCn register,
- * bit 0: 0=increment pointer, 1=leave pointer
- * bit 1: 0=soucre is AHB, 1=soucre is APB
- *
- * devaddr: physical address of the source
-*/
-
-int s3c2410_dma_devconfig(int channel,
- enum s3c2410_dmasrc source,
- int hwcfg,
- unsigned long devaddr)
-{
- struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
-
- if (chan == NULL)
- return -EINVAL;
-
- pr_debug("%s: source=%d, hwcfg=%08x, devaddr=%08lx\n",
- __FUNCTION__, (int)source, hwcfg, devaddr);
-
- chan->source = source;
- chan->dev_addr = devaddr;
-
- switch (source) {
- case S3C2410_DMASRC_HW:
- /* source is hardware */
- pr_debug("%s: hw source, devaddr=%08lx, hwcfg=%d\n",
- __FUNCTION__, devaddr, hwcfg);
- dma_wrreg(chan, S3C2410_DMA_DISRCC, hwcfg & 3);
- dma_wrreg(chan, S3C2410_DMA_DISRC, devaddr);
- dma_wrreg(chan, S3C2410_DMA_DIDSTC, (0<<1) | (0<<0));
-
- chan->addr_reg = dma_regaddr(chan, S3C2410_DMA_DIDST);
- return 0;
-
- case S3C2410_DMASRC_MEM:
- /* source is memory */
- pr_debug( "%s: mem source, devaddr=%08lx, hwcfg=%d\n",
- __FUNCTION__, devaddr, hwcfg);
- dma_wrreg(chan, S3C2410_DMA_DISRCC, (0<<1) | (0<<0));
- dma_wrreg(chan, S3C2410_DMA_DIDST, devaddr);
- dma_wrreg(chan, S3C2410_DMA_DIDSTC, hwcfg & 3);
-
- chan->addr_reg = dma_regaddr(chan, S3C2410_DMA_DISRC);
- return 0;
- }
-
- printk(KERN_ERR "dma%d: invalid source type (%d)\n", channel, source);
- return -EINVAL;
-}
-
-EXPORT_SYMBOL(s3c2410_dma_devconfig);
-
-/* s3c2410_dma_getposition
- *
- * returns the current transfer points for the dma source and destination
-*/
-
-int s3c2410_dma_getposition(dmach_t channel, dma_addr_t *src, dma_addr_t *dst)
-{
- struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
-
- if (chan == NULL)
- return -EINVAL;
-
- if (src != NULL)
- *src = dma_rdreg(chan, S3C2410_DMA_DCSRC);
-
- if (dst != NULL)
- *dst = dma_rdreg(chan, S3C2410_DMA_DCDST);
-
- return 0;
-}
-
-EXPORT_SYMBOL(s3c2410_dma_getposition);
-
-
-/* system device class */
-
-#ifdef CONFIG_PM
-
-static int s3c2410_dma_suspend(struct sys_device *dev, pm_message_t state)
-{
- struct s3c2410_dma_chan *cp = container_of(dev, struct s3c2410_dma_chan, dev);
-
- printk(KERN_DEBUG "suspending dma channel %d\n", cp->number);
-
- if (dma_rdreg(cp, S3C2410_DMA_DMASKTRIG) & S3C2410_DMASKTRIG_ON) {
- /* the dma channel is still working, which is probably
- * a bad thing to do over suspend/resume. We stop the
- * channel and assume that the client is either going to
- * retry after resume, or that it is broken.
- */
-
- printk(KERN_INFO "dma: stopping channel %d due to suspend\n",
- cp->number);
-
- s3c2410_dma_dostop(cp);
- }
-
- return 0;
-}
-
-static int s3c2410_dma_resume(struct sys_device *dev)
-{
- return 0;
-}
-
-#else
-#define s3c2410_dma_suspend NULL
-#define s3c2410_dma_resume NULL
-#endif /* CONFIG_PM */
-
-struct sysdev_class dma_sysclass = {
- set_kset_name("s3c24xx-dma"),
- .suspend = s3c2410_dma_suspend,
- .resume = s3c2410_dma_resume,
+#if defined(CONFIG_CPU_S3C2442)
+/* S3C2442 DMA contains the same selection table as the S3C2410 */
+static struct sysdev_driver s3c2442_dma_driver = {
+ .add = s3c2410_dma_add,
};
-/* kmem cache implementation */
-
-static void s3c2410_dma_cache_ctor(void *p, struct kmem_cache *c, unsigned long f)
-{
- memset(p, 0, sizeof(struct s3c2410_dma_buf));
-}
-
-/* initialisation code */
-
-static int __init s3c2410_init_dma(void)
-{
- struct s3c2410_dma_chan *cp;
- int channel;
- int ret;
-
- printk("S3C24XX DMA Driver, (c) 2003-2004,2006 Simtec Electronics\n");
-
- dma_base = ioremap(S3C24XX_PA_DMA, 0x200);
- if (dma_base == NULL) {
- printk(KERN_ERR "dma failed to remap register block\n");
- return -ENOMEM;
- }
-
- printk("Registering sysclass\n");
-
- ret = sysdev_class_register(&dma_sysclass);
- if (ret != 0) {
- printk(KERN_ERR "dma sysclass registration failed\n");
- goto err;
- }
-
- dma_kmem = kmem_cache_create("dma_desc", sizeof(struct s3c2410_dma_buf), 0,
- SLAB_HWCACHE_ALIGN,
- s3c2410_dma_cache_ctor, NULL);
-
- if (dma_kmem == NULL) {
- printk(KERN_ERR "dma failed to make kmem cache\n");
- ret = -ENOMEM;
- goto err;
- }
-
- for (channel = 0; channel < S3C2410_DMA_CHANNELS; channel++) {
- cp = &s3c2410_chans[channel];
-
- memset(cp, 0, sizeof(struct s3c2410_dma_chan));
-
- /* dma channel irqs are in order.. */
- cp->number = channel;
- cp->irq = channel + IRQ_DMA0;
- cp->regs = dma_base + (channel*0x40);
-
- /* point current stats somewhere */
- cp->stats = &cp->stats_store;
- cp->stats_store.timeout_shortest = LONG_MAX;
-
- /* basic channel configuration */
-
- cp->load_timeout = 1<<18;
-
- /* register system device */
-
- cp->dev.cls = &dma_sysclass;
- cp->dev.id = channel;
- ret = sysdev_register(&cp->dev);
-
- printk("DMA channel %d at %p, irq %d\n",
- cp->number, cp->regs, cp->irq);
- }
-
- return 0;
-
- err:
- kmem_cache_destroy(dma_kmem);
- iounmap(dma_base);
- dma_base = NULL;
- return ret;
-}
-
-core_initcall(s3c2410_init_dma);
-
-static inline int is_channel_valid(unsigned int channel)
+static int __init s3c2442_dma_drvinit(void)
{
- return (channel & DMA_CH_VALID);
+ return sysdev_driver_register(&s3c2442_sysclass, &s3c2442_dma_driver);
}
-/* s3c2410_dma_map_channel()
- *
- * turn the virtual channel number into a real, and un-used hardware
- * channel.
- *
- * currently this code uses first-free channel from the specified harware
- * map, not taking into account anything that the board setup code may
- * have to say about the likely peripheral set to be in use.
-*/
-
-struct s3c2410_dma_chan *s3c2410_dma_map_channel(int channel)
-{
- struct s3c24xx_dma_map *ch_map;
- struct s3c2410_dma_chan *dmach;
- int ch;
-
- if (dma_sel.map == NULL || channel > dma_sel.map_size)
- return NULL;
-
- ch_map = dma_sel.map + channel;
-
- for (ch = 0; ch < S3C2410_DMA_CHANNELS; ch++) {
- if (!is_channel_valid(ch_map->channels[ch]))
- continue;
-
- if (s3c2410_chans[ch].in_use == 0) {
- printk("mapped channel %d to %d\n", channel, ch);
- break;
- }
- }
-
- if (ch >= S3C2410_DMA_CHANNELS)
- return NULL;
-
- /* update our channel mapping */
-
- dmach = &s3c2410_chans[ch];
- dma_chan_map[channel] = dmach;
-
- /* select the channel */
-
- (dma_sel.select)(dmach, ch_map);
-
- return dmach;
-}
-
-static void s3c24xx_dma_show_ch(struct s3c24xx_dma_map *map, int ch)
-{
- /* show the channel configuration */
-
- printk("%2d: %20s, channels %c%c%c%c\n", ch, map->name,
- (is_channel_valid(map->channels[0]) ? '0' : '-'),
- (is_channel_valid(map->channels[1]) ? '1' : '-'),
- (is_channel_valid(map->channels[2]) ? '2' : '-'),
- (is_channel_valid(map->channels[3]) ? '3' : '-'));
-}
-
-static int s3c24xx_dma_check_entry(struct s3c24xx_dma_map *map, int ch)
-{
- if (1)
- s3c24xx_dma_show_ch(map, ch);
-
- return 0;
-}
-
-int __init s3c24xx_dma_init_map(struct s3c24xx_dma_selection *sel)
-{
- struct s3c24xx_dma_map *nmap;
- size_t map_sz = sizeof(*nmap) * sel->map_size;
- int ptr;
-
- nmap = kmalloc(map_sz, GFP_KERNEL);
- if (nmap == NULL)
- return -ENOMEM;
-
- memcpy(nmap, sel->map, map_sz);
- memcpy(&dma_sel, sel, sizeof(*sel));
-
- dma_sel.map = nmap;
-
- for (ptr = 0; ptr < sel->map_size; ptr++)
- s3c24xx_dma_check_entry(nmap+ptr, ptr);
+arch_initcall(s3c2442_dma_drvinit);
+#endif
- return 0;
-}
/* linux/arch/arm/mach-s3c2410/gpio.c
*
- * Copyright (c) 2004-2005 Simtec Electronics
+ * Copyright (c) 2004-2006 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
*
- * S3C24XX GPIO support
+ * S3C2410 GPIO support
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-*/
-
+ */
#include <linux/kernel.h>
#include <linux/init.h>
#include <asm/arch/regs-gpio.h>
-void s3c2410_gpio_cfgpin(unsigned int pin, unsigned int function)
-{
- void __iomem *base = S3C24XX_GPIO_BASE(pin);
- unsigned long mask;
- unsigned long con;
- unsigned long flags;
-
- if (pin < S3C2410_GPIO_BANKB) {
- mask = 1 << S3C2410_GPIO_OFFSET(pin);
- } else {
- mask = 3 << S3C2410_GPIO_OFFSET(pin)*2;
- }
-
- switch (function) {
- case S3C2410_GPIO_LEAVE:
- mask = 0;
- function = 0;
- break;
-
- case S3C2410_GPIO_INPUT:
- case S3C2410_GPIO_OUTPUT:
- case S3C2410_GPIO_SFN2:
- case S3C2410_GPIO_SFN3:
- if (pin < S3C2410_GPIO_BANKB) {
- function -= 1;
- function &= 1;
- function <<= S3C2410_GPIO_OFFSET(pin);
- } else {
- function &= 3;
- function <<= S3C2410_GPIO_OFFSET(pin)*2;
- }
- }
-
- /* modify the specified register wwith IRQs off */
-
- local_irq_save(flags);
-
- con = __raw_readl(base + 0x00);
- con &= ~mask;
- con |= function;
-
- __raw_writel(con, base + 0x00);
-
- local_irq_restore(flags);
-}
-
-EXPORT_SYMBOL(s3c2410_gpio_cfgpin);
-
-unsigned int s3c2410_gpio_getcfg(unsigned int pin)
-{
- void __iomem *base = S3C24XX_GPIO_BASE(pin);
- unsigned long val = __raw_readl(base);
-
- if (pin < S3C2410_GPIO_BANKB) {
- val >>= S3C2410_GPIO_OFFSET(pin);
- val &= 1;
- val += 1;
- } else {
- val >>= S3C2410_GPIO_OFFSET(pin)*2;
- val &= 3;
- }
-
- return val | S3C2410_GPIO_INPUT;
-}
-
-EXPORT_SYMBOL(s3c2410_gpio_getcfg);
-
-void s3c2410_gpio_pullup(unsigned int pin, unsigned int to)
+int s3c2410_gpio_irqfilter(unsigned int pin, unsigned int on,
+ unsigned int config)
{
- void __iomem *base = S3C24XX_GPIO_BASE(pin);
- unsigned long offs = S3C2410_GPIO_OFFSET(pin);
+ void __iomem *reg = S3C24XX_EINFLT0;
unsigned long flags;
- unsigned long up;
-
- if (pin < S3C2410_GPIO_BANKB)
- return;
-
- local_irq_save(flags);
-
- up = __raw_readl(base + 0x08);
- up &= ~(1L << offs);
- up |= to << offs;
- __raw_writel(up, base + 0x08);
+ unsigned long val;
- local_irq_restore(flags);
-}
+ if (pin < S3C2410_GPG8 || pin > S3C2410_GPG15)
+ return -1;
-EXPORT_SYMBOL(s3c2410_gpio_pullup);
+ config &= 0xff;
-void s3c2410_gpio_setpin(unsigned int pin, unsigned int to)
-{
- void __iomem *base = S3C24XX_GPIO_BASE(pin);
- unsigned long offs = S3C2410_GPIO_OFFSET(pin);
- unsigned long flags;
- unsigned long dat;
+ pin -= S3C2410_GPG8;
+ reg += pin & ~3;
local_irq_save(flags);
- dat = __raw_readl(base + 0x04);
- dat &= ~(1 << offs);
- dat |= to << offs;
- __raw_writel(dat, base + 0x04);
-
- local_irq_restore(flags);
-}
-
-EXPORT_SYMBOL(s3c2410_gpio_setpin);
-
-unsigned int s3c2410_gpio_getpin(unsigned int pin)
-{
- void __iomem *base = S3C24XX_GPIO_BASE(pin);
- unsigned long offs = S3C2410_GPIO_OFFSET(pin);
+ /* update filter width and clock source */
- return __raw_readl(base + 0x04) & (1<< offs);
-}
+ val = __raw_readl(reg);
+ val &= ~(0xff << ((pin & 3) * 8));
+ val |= config << ((pin & 3) * 8);
+ __raw_writel(val, reg);
-EXPORT_SYMBOL(s3c2410_gpio_getpin);
+ /* update filter enable */
-unsigned int s3c2410_modify_misccr(unsigned int clear, unsigned int change)
-{
- unsigned long flags;
- unsigned long misccr;
+ val = __raw_readl(S3C24XX_EXTINT2);
+ val &= ~(1 << ((pin * 4) + 3));
+ val |= on << ((pin * 4) + 3);
+ __raw_writel(val, S3C24XX_EXTINT2);
- local_irq_save(flags);
- misccr = __raw_readl(S3C24XX_MISCCR);
- misccr &= ~clear;
- misccr ^= change;
- __raw_writel(misccr, S3C24XX_MISCCR);
local_irq_restore(flags);
- return misccr;
-}
-
-EXPORT_SYMBOL(s3c2410_modify_misccr);
-
-int s3c2410_gpio_getirq(unsigned int pin)
-{
- if (pin < S3C2410_GPF0 || pin > S3C2410_GPG15)
- return -1; /* not valid interrupts */
-
- if (pin < S3C2410_GPG0 && pin > S3C2410_GPF7)
- return -1; /* not valid pin */
-
- if (pin < S3C2410_GPF4)
- return (pin - S3C2410_GPF0) + IRQ_EINT0;
-
- if (pin < S3C2410_GPG0)
- return (pin - S3C2410_GPF4) + IRQ_EINT4;
-
- return (pin - S3C2410_GPG0) + IRQ_EINT8;
+ return 0;
}
-EXPORT_SYMBOL(s3c2410_gpio_getirq);
+EXPORT_SYMBOL(s3c2410_gpio_irqfilter);
/* linux/arch/arm/mach-s3c2410/irq.c
*
- * Copyright (c) 2003,2004 Simtec Electronics
+ * Copyright (c) 2006 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
*
* This program is free software; you can redistribute it and/or modify
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
- * Changelog:
- *
- * 22-Jul-2004 Ben Dooks <ben@simtec.co.uk>
- * Fixed compile warnings
- *
- * 22-Jul-2004 Roc Wu <cooloney@yahoo.com.cn>
- * Fixed s3c_extirq_type
- *
- * 21-Jul-2004 Arnaud Patard (Rtp) <arnaud.patard@rtp-net.org>
- * Addition of ADC/TC demux
- *
- * 04-Oct-2004 Klaus Fetscher <k.fetscher@fetron.de>
- * Fix for set_irq_type() on low EINT numbers
- *
- * 05-Oct-2004 Ben Dooks <ben@simtec.co.uk>
- * Tidy up KF's patch and sort out new release
- *
- * 05-Oct-2004 Ben Dooks <ben@simtec.co.uk>
- * Add support for power management controls
- *
- * 04-Nov-2004 Ben Dooks
- * Fix standard IRQ wake for EINT0..4 and RTC
- *
- * 22-Feb-2005 Ben Dooks
- * Fixed edge-triggering on ADC IRQ
- *
- * 28-Jun-2005 Ben Dooks
- * Mark IRQ_LCD valid
- *
- * 25-Jul-2005 Ben Dooks
- * Split the S3C2440 IRQ code to seperate file
*/
#include <linux/init.h>
#include <linux/ptrace.h>
#include <linux/sysdev.h>
-#include <asm/hardware.h>
-#include <asm/irq.h>
-#include <asm/io.h>
-
-#include <asm/mach/irq.h>
-
-#include <asm/arch/regs-irq.h>
-#include <asm/arch/regs-gpio.h>
-
-#include "cpu.h"
-#include "pm.h"
-#include "irq.h"
-
-/* wakeup irq control */
-
-#ifdef CONFIG_PM
-
-/* state for IRQs over sleep */
-
-/* default is to allow for EINT0..EINT15, and IRQ_RTC as wakeup sources
- *
- * set bit to 1 in allow bitfield to enable the wakeup settings on it
-*/
-
-unsigned long s3c_irqwake_intallow = 1L << (IRQ_RTC - IRQ_EINT0) | 0xfL;
-unsigned long s3c_irqwake_intmask = 0xffffffffL;
-unsigned long s3c_irqwake_eintallow = 0x0000fff0L;
-unsigned long s3c_irqwake_eintmask = 0xffffffffL;
-
-int
-s3c_irq_wake(unsigned int irqno, unsigned int state)
-{
- unsigned long irqbit = 1 << (irqno - IRQ_EINT0);
-
- if (!(s3c_irqwake_intallow & irqbit))
- return -ENOENT;
-
- printk(KERN_INFO "wake %s for irq %d\n",
- state ? "enabled" : "disabled", irqno);
-
- if (!state)
- s3c_irqwake_intmask |= irqbit;
- else
- s3c_irqwake_intmask &= ~irqbit;
-
- return 0;
-}
-
-static int
-s3c_irqext_wake(unsigned int irqno, unsigned int state)
-{
- unsigned long bit = 1L << (irqno - EXTINT_OFF);
-
- if (!(s3c_irqwake_eintallow & bit))
- return -ENOENT;
-
- printk(KERN_INFO "wake %s for irq %d\n",
- state ? "enabled" : "disabled", irqno);
-
- if (!state)
- s3c_irqwake_eintmask |= bit;
- else
- s3c_irqwake_eintmask &= ~bit;
-
- return 0;
-}
-
-#else
-#define s3c_irqext_wake NULL
-#define s3c_irq_wake NULL
-#endif
-
-
-static void
-s3c_irq_mask(unsigned int irqno)
-{
- unsigned long mask;
-
- irqno -= IRQ_EINT0;
-
- mask = __raw_readl(S3C2410_INTMSK);
- mask |= 1UL << irqno;
- __raw_writel(mask, S3C2410_INTMSK);
-}
-
-static inline void
-s3c_irq_ack(unsigned int irqno)
-{
- unsigned long bitval = 1UL << (irqno - IRQ_EINT0);
-
- __raw_writel(bitval, S3C2410_SRCPND);
- __raw_writel(bitval, S3C2410_INTPND);
-}
-
-static inline void
-s3c_irq_maskack(unsigned int irqno)
-{
- unsigned long bitval = 1UL << (irqno - IRQ_EINT0);
- unsigned long mask;
-
- mask = __raw_readl(S3C2410_INTMSK);
- __raw_writel(mask|bitval, S3C2410_INTMSK);
-
- __raw_writel(bitval, S3C2410_SRCPND);
- __raw_writel(bitval, S3C2410_INTPND);
-}
-
-
-static void
-s3c_irq_unmask(unsigned int irqno)
-{
- unsigned long mask;
-
- if (irqno != IRQ_TIMER4 && irqno != IRQ_EINT8t23)
- irqdbf2("s3c_irq_unmask %d\n", irqno);
-
- irqno -= IRQ_EINT0;
-
- mask = __raw_readl(S3C2410_INTMSK);
- mask &= ~(1UL << irqno);
- __raw_writel(mask, S3C2410_INTMSK);
-}
-
-struct irq_chip s3c_irq_level_chip = {
- .name = "s3c-level",
- .ack = s3c_irq_maskack,
- .mask = s3c_irq_mask,
- .unmask = s3c_irq_unmask,
- .set_wake = s3c_irq_wake
-};
-
-static struct irq_chip s3c_irq_chip = {
- .name = "s3c",
- .ack = s3c_irq_ack,
- .mask = s3c_irq_mask,
- .unmask = s3c_irq_unmask,
- .set_wake = s3c_irq_wake
-};
-
-static void
-s3c_irqext_mask(unsigned int irqno)
-{
- unsigned long mask;
-
- irqno -= EXTINT_OFF;
-
- mask = __raw_readl(S3C24XX_EINTMASK);
- mask |= ( 1UL << irqno);
- __raw_writel(mask, S3C24XX_EINTMASK);
-}
-
-static void
-s3c_irqext_ack(unsigned int irqno)
-{
- unsigned long req;
- unsigned long bit;
- unsigned long mask;
+#include <asm/plat-s3c24xx/cpu.h>
+#include <asm/plat-s3c24xx/pm.h>
- bit = 1UL << (irqno - EXTINT_OFF);
-
- mask = __raw_readl(S3C24XX_EINTMASK);
-
- __raw_writel(bit, S3C24XX_EINTPEND);
-
- req = __raw_readl(S3C24XX_EINTPEND);
- req &= ~mask;
-
- /* not sure if we should be acking the parent irq... */
-
- if (irqno <= IRQ_EINT7 ) {
- if ((req & 0xf0) == 0)
- s3c_irq_ack(IRQ_EINT4t7);
- } else {
- if ((req >> 8) == 0)
- s3c_irq_ack(IRQ_EINT8t23);
- }
-}
-
-static void
-s3c_irqext_unmask(unsigned int irqno)
+static int s3c2410_irq_add(struct sys_device *sysdev)
{
- unsigned long mask;
-
- irqno -= EXTINT_OFF;
-
- mask = __raw_readl(S3C24XX_EINTMASK);
- mask &= ~( 1UL << irqno);
- __raw_writel(mask, S3C24XX_EINTMASK);
-}
-
-int
-s3c_irqext_type(unsigned int irq, unsigned int type)
-{
- void __iomem *extint_reg;
- void __iomem *gpcon_reg;
- unsigned long gpcon_offset, extint_offset;
- unsigned long newvalue = 0, value;
-
- if ((irq >= IRQ_EINT0) && (irq <= IRQ_EINT3))
- {
- gpcon_reg = S3C2410_GPFCON;
- extint_reg = S3C24XX_EXTINT0;
- gpcon_offset = (irq - IRQ_EINT0) * 2;
- extint_offset = (irq - IRQ_EINT0) * 4;
- }
- else if ((irq >= IRQ_EINT4) && (irq <= IRQ_EINT7))
- {
- gpcon_reg = S3C2410_GPFCON;
- extint_reg = S3C24XX_EXTINT0;
- gpcon_offset = (irq - (EXTINT_OFF)) * 2;
- extint_offset = (irq - (EXTINT_OFF)) * 4;
- }
- else if ((irq >= IRQ_EINT8) && (irq <= IRQ_EINT15))
- {
- gpcon_reg = S3C2410_GPGCON;
- extint_reg = S3C24XX_EXTINT1;
- gpcon_offset = (irq - IRQ_EINT8) * 2;
- extint_offset = (irq - IRQ_EINT8) * 4;
- }
- else if ((irq >= IRQ_EINT16) && (irq <= IRQ_EINT23))
- {
- gpcon_reg = S3C2410_GPGCON;
- extint_reg = S3C24XX_EXTINT2;
- gpcon_offset = (irq - IRQ_EINT8) * 2;
- extint_offset = (irq - IRQ_EINT16) * 4;
- } else
- return -1;
-
- /* Set the GPIO to external interrupt mode */
- value = __raw_readl(gpcon_reg);
- value = (value & ~(3 << gpcon_offset)) | (0x02 << gpcon_offset);
- __raw_writel(value, gpcon_reg);
-
- /* Set the external interrupt to pointed trigger type */
- switch (type)
- {
- case IRQT_NOEDGE:
- printk(KERN_WARNING "No edge setting!\n");
- break;
-
- case IRQT_RISING:
- newvalue = S3C2410_EXTINT_RISEEDGE;
- break;
-
- case IRQT_FALLING:
- newvalue = S3C2410_EXTINT_FALLEDGE;
- break;
-
- case IRQT_BOTHEDGE:
- newvalue = S3C2410_EXTINT_BOTHEDGE;
- break;
-
- case IRQT_LOW:
- newvalue = S3C2410_EXTINT_LOWLEV;
- break;
-
- case IRQT_HIGH:
- newvalue = S3C2410_EXTINT_HILEV;
- break;
-
- default:
- printk(KERN_ERR "No such irq type %d", type);
- return -1;
- }
-
- value = __raw_readl(extint_reg);
- value = (value & ~(7 << extint_offset)) | (newvalue << extint_offset);
- __raw_writel(value, extint_reg);
-
return 0;
}
-static struct irq_chip s3c_irqext_chip = {
- .name = "s3c-ext",
- .mask = s3c_irqext_mask,
- .unmask = s3c_irqext_unmask,
- .ack = s3c_irqext_ack,
- .set_type = s3c_irqext_type,
- .set_wake = s3c_irqext_wake
-};
-
-static struct irq_chip s3c_irq_eint0t4 = {
- .name = "s3c-ext0",
- .ack = s3c_irq_ack,
- .mask = s3c_irq_mask,
- .unmask = s3c_irq_unmask,
- .set_wake = s3c_irq_wake,
- .set_type = s3c_irqext_type,
-};
-
-/* mask values for the parent registers for each of the interrupt types */
-
-#define INTMSK_UART0 (1UL << (IRQ_UART0 - IRQ_EINT0))
-#define INTMSK_UART1 (1UL << (IRQ_UART1 - IRQ_EINT0))
-#define INTMSK_UART2 (1UL << (IRQ_UART2 - IRQ_EINT0))
-#define INTMSK_ADCPARENT (1UL << (IRQ_ADCPARENT - IRQ_EINT0))
-
-
-/* UART0 */
-
-static void
-s3c_irq_uart0_mask(unsigned int irqno)
-{
- s3c_irqsub_mask(irqno, INTMSK_UART0, 7);
-}
-
-static void
-s3c_irq_uart0_unmask(unsigned int irqno)
-{
- s3c_irqsub_unmask(irqno, INTMSK_UART0);
-}
-
-static void
-s3c_irq_uart0_ack(unsigned int irqno)
-{
- s3c_irqsub_maskack(irqno, INTMSK_UART0, 7);
-}
-
-static struct irq_chip s3c_irq_uart0 = {
- .name = "s3c-uart0",
- .mask = s3c_irq_uart0_mask,
- .unmask = s3c_irq_uart0_unmask,
- .ack = s3c_irq_uart0_ack,
-};
-
-/* UART1 */
-
-static void
-s3c_irq_uart1_mask(unsigned int irqno)
-{
- s3c_irqsub_mask(irqno, INTMSK_UART1, 7 << 3);
-}
-
-static void
-s3c_irq_uart1_unmask(unsigned int irqno)
-{
- s3c_irqsub_unmask(irqno, INTMSK_UART1);
-}
-
-static void
-s3c_irq_uart1_ack(unsigned int irqno)
-{
- s3c_irqsub_maskack(irqno, INTMSK_UART1, 7 << 3);
-}
-
-static struct irq_chip s3c_irq_uart1 = {
- .name = "s3c-uart1",
- .mask = s3c_irq_uart1_mask,
- .unmask = s3c_irq_uart1_unmask,
- .ack = s3c_irq_uart1_ack,
-};
-
-/* UART2 */
-
-static void
-s3c_irq_uart2_mask(unsigned int irqno)
-{
- s3c_irqsub_mask(irqno, INTMSK_UART2, 7 << 6);
-}
-
-static void
-s3c_irq_uart2_unmask(unsigned int irqno)
-{
- s3c_irqsub_unmask(irqno, INTMSK_UART2);
-}
-
-static void
-s3c_irq_uart2_ack(unsigned int irqno)
-{
- s3c_irqsub_maskack(irqno, INTMSK_UART2, 7 << 6);
-}
-
-static struct irq_chip s3c_irq_uart2 = {
- .name = "s3c-uart2",
- .mask = s3c_irq_uart2_mask,
- .unmask = s3c_irq_uart2_unmask,
- .ack = s3c_irq_uart2_ack,
-};
-
-/* ADC and Touchscreen */
-
-static void
-s3c_irq_adc_mask(unsigned int irqno)
-{
- s3c_irqsub_mask(irqno, INTMSK_ADCPARENT, 3 << 9);
-}
-
-static void
-s3c_irq_adc_unmask(unsigned int irqno)
-{
- s3c_irqsub_unmask(irqno, INTMSK_ADCPARENT);
-}
-
-static void
-s3c_irq_adc_ack(unsigned int irqno)
-{
- s3c_irqsub_ack(irqno, INTMSK_ADCPARENT, 3 << 9);
-}
-
-static struct irq_chip s3c_irq_adc = {
- .name = "s3c-adc",
- .mask = s3c_irq_adc_mask,
- .unmask = s3c_irq_adc_unmask,
- .ack = s3c_irq_adc_ack,
-};
-
-/* irq demux for adc */
-static void s3c_irq_demux_adc(unsigned int irq,
- struct irq_desc *desc)
-{
- unsigned int subsrc, submsk;
- unsigned int offset = 9;
- struct irq_desc *mydesc;
-
- /* read the current pending interrupts, and the mask
- * for what it is available */
-
- subsrc = __raw_readl(S3C2410_SUBSRCPND);
- submsk = __raw_readl(S3C2410_INTSUBMSK);
-
- subsrc &= ~submsk;
- subsrc >>= offset;
- subsrc &= 3;
-
- if (subsrc != 0) {
- if (subsrc & 1) {
- mydesc = irq_desc + IRQ_TC;
- desc_handle_irq(IRQ_TC, mydesc);
- }
- if (subsrc & 2) {
- mydesc = irq_desc + IRQ_ADC;
- desc_handle_irq(IRQ_ADC, mydesc);
- }
- }
-}
-
-static void s3c_irq_demux_uart(unsigned int start)
-{
- unsigned int subsrc, submsk;
- unsigned int offset = start - IRQ_S3CUART_RX0;
- struct irq_desc *desc;
-
- /* read the current pending interrupts, and the mask
- * for what it is available */
-
- subsrc = __raw_readl(S3C2410_SUBSRCPND);
- submsk = __raw_readl(S3C2410_INTSUBMSK);
-
- irqdbf2("s3c_irq_demux_uart: start=%d (%d), subsrc=0x%08x,0x%08x\n",
- start, offset, subsrc, submsk);
-
- subsrc &= ~submsk;
- subsrc >>= offset;
- subsrc &= 7;
-
- if (subsrc != 0) {
- desc = irq_desc + start;
-
- if (subsrc & 1)
- desc_handle_irq(start, desc);
-
- desc++;
-
- if (subsrc & 2)
- desc_handle_irq(start+1, desc);
-
- desc++;
-
- if (subsrc & 4)
- desc_handle_irq(start+2, desc);
- }
-}
-
-/* uart demux entry points */
-
-static void
-s3c_irq_demux_uart0(unsigned int irq,
- struct irq_desc *desc)
-{
- irq = irq;
- s3c_irq_demux_uart(IRQ_S3CUART_RX0);
-}
-
-static void
-s3c_irq_demux_uart1(unsigned int irq,
- struct irq_desc *desc)
-{
- irq = irq;
- s3c_irq_demux_uart(IRQ_S3CUART_RX1);
-}
-
-static void
-s3c_irq_demux_uart2(unsigned int irq,
- struct irq_desc *desc)
-{
- irq = irq;
- s3c_irq_demux_uart(IRQ_S3CUART_RX2);
-}
-
-static void
-s3c_irq_demux_extint8(unsigned int irq,
- struct irq_desc *desc)
-{
- unsigned long eintpnd = __raw_readl(S3C24XX_EINTPEND);
- unsigned long eintmsk = __raw_readl(S3C24XX_EINTMASK);
-
- eintpnd &= ~eintmsk;
- eintpnd &= ~0xff; /* ignore lower irqs */
-
- /* we may as well handle all the pending IRQs here */
-
- while (eintpnd) {
- irq = __ffs(eintpnd);
- eintpnd &= ~(1<<irq);
-
- irq += (IRQ_EINT4 - 4);
- desc_handle_irq(irq, irq_desc + irq);
- }
-
-}
-
-static void
-s3c_irq_demux_extint4t7(unsigned int irq,
- struct irq_desc *desc)
-{
- unsigned long eintpnd = __raw_readl(S3C24XX_EINTPEND);
- unsigned long eintmsk = __raw_readl(S3C24XX_EINTMASK);
-
- eintpnd &= ~eintmsk;
- eintpnd &= 0xff; /* only lower irqs */
-
- /* we may as well handle all the pending IRQs here */
-
- while (eintpnd) {
- irq = __ffs(eintpnd);
- eintpnd &= ~(1<<irq);
-
- irq += (IRQ_EINT4 - 4);
-
- desc_handle_irq(irq, irq_desc + irq);
- }
-}
-
-#ifdef CONFIG_PM
-
-static struct sleep_save irq_save[] = {
- SAVE_ITEM(S3C2410_INTMSK),
- SAVE_ITEM(S3C2410_INTSUBMSK),
+static struct sysdev_driver s3c2410_irq_driver = {
+ .add = s3c2410_irq_add,
+ .suspend = s3c24xx_irq_suspend,
+ .resume = s3c24xx_irq_resume,
};
-/* the extint values move between the s3c2410/s3c2440 and the s3c2412
- * so we use an array to hold them, and to calculate the address of
- * the register at run-time
-*/
-
-static unsigned long save_extint[3];
-static unsigned long save_eintflt[4];
-static unsigned long save_eintmask;
-
-int s3c24xx_irq_suspend(struct sys_device *dev, pm_message_t state)
+static int s3c2410_irq_init(void)
{
- unsigned int i;
-
- for (i = 0; i < ARRAY_SIZE(save_extint); i++)
- save_extint[i] = __raw_readl(S3C24XX_EXTINT0 + (i*4));
-
- for (i = 0; i < ARRAY_SIZE(save_eintflt); i++)
- save_eintflt[i] = __raw_readl(S3C24XX_EINFLT0 + (i*4));
-
- s3c2410_pm_do_save(irq_save, ARRAY_SIZE(irq_save));
- save_eintmask = __raw_readl(S3C24XX_EINTMASK);
-
- return 0;
+ return sysdev_driver_register(&s3c2410_sysclass, &s3c2410_irq_driver);
}
-int s3c24xx_irq_resume(struct sys_device *dev)
-{
- unsigned int i;
-
- for (i = 0; i < ARRAY_SIZE(save_extint); i++)
- __raw_writel(save_extint[i], S3C24XX_EXTINT0 + (i*4));
-
- for (i = 0; i < ARRAY_SIZE(save_eintflt); i++)
- __raw_writel(save_eintflt[i], S3C24XX_EINFLT0 + (i*4));
-
- s3c2410_pm_do_restore(irq_save, ARRAY_SIZE(irq_save));
- __raw_writel(save_eintmask, S3C24XX_EINTMASK);
-
- return 0;
-}
-
-#else
-#define s3c24xx_irq_suspend NULL
-#define s3c24xx_irq_resume NULL
-#endif
-
-/* s3c24xx_init_irq
- *
- * Initialise S3C2410 IRQ system
-*/
-
-void __init s3c24xx_init_irq(void)
-{
- unsigned long pend;
- unsigned long last;
- int irqno;
- int i;
-
- irqdbf("s3c2410_init_irq: clearing interrupt status flags\n");
-
- /* first, clear all interrupts pending... */
-
- last = 0;
- for (i = 0; i < 4; i++) {
- pend = __raw_readl(S3C24XX_EINTPEND);
-
- if (pend == 0 || pend == last)
- break;
-
- __raw_writel(pend, S3C24XX_EINTPEND);
- printk("irq: clearing pending ext status %08x\n", (int)pend);
- last = pend;
- }
-
- last = 0;
- for (i = 0; i < 4; i++) {
- pend = __raw_readl(S3C2410_INTPND);
-
- if (pend == 0 || pend == last)
- break;
-
- __raw_writel(pend, S3C2410_SRCPND);
- __raw_writel(pend, S3C2410_INTPND);
- printk("irq: clearing pending status %08x\n", (int)pend);
- last = pend;
- }
-
- last = 0;
- for (i = 0; i < 4; i++) {
- pend = __raw_readl(S3C2410_SUBSRCPND);
-
- if (pend == 0 || pend == last)
- break;
-
- printk("irq: clearing subpending status %08x\n", (int)pend);
- __raw_writel(pend, S3C2410_SUBSRCPND);
- last = pend;
- }
-
- /* register the main interrupts */
-
- irqdbf("s3c2410_init_irq: registering s3c2410 interrupt handlers\n");
-
- for (irqno = IRQ_EINT4t7; irqno <= IRQ_ADCPARENT; irqno++) {
- /* set all the s3c2410 internal irqs */
-
- switch (irqno) {
- /* deal with the special IRQs (cascaded) */
-
- case IRQ_EINT4t7:
- case IRQ_EINT8t23:
- case IRQ_UART0:
- case IRQ_UART1:
- case IRQ_UART2:
- case IRQ_ADCPARENT:
- set_irq_chip(irqno, &s3c_irq_level_chip);
- set_irq_handler(irqno, handle_level_irq);
- break;
-
- case IRQ_RESERVED6:
- case IRQ_RESERVED24:
- /* no IRQ here */
- break;
-
- default:
- //irqdbf("registering irq %d (s3c irq)\n", irqno);
- set_irq_chip(irqno, &s3c_irq_chip);
- set_irq_handler(irqno, handle_edge_irq);
- set_irq_flags(irqno, IRQF_VALID);
- }
- }
-
- /* setup the cascade irq handlers */
-
- set_irq_chained_handler(IRQ_EINT4t7, s3c_irq_demux_extint4t7);
- set_irq_chained_handler(IRQ_EINT8t23, s3c_irq_demux_extint8);
-
- set_irq_chained_handler(IRQ_UART0, s3c_irq_demux_uart0);
- set_irq_chained_handler(IRQ_UART1, s3c_irq_demux_uart1);
- set_irq_chained_handler(IRQ_UART2, s3c_irq_demux_uart2);
- set_irq_chained_handler(IRQ_ADCPARENT, s3c_irq_demux_adc);
-
- /* external interrupts */
-
- for (irqno = IRQ_EINT0; irqno <= IRQ_EINT3; irqno++) {
- irqdbf("registering irq %d (ext int)\n", irqno);
- set_irq_chip(irqno, &s3c_irq_eint0t4);
- set_irq_handler(irqno, handle_edge_irq);
- set_irq_flags(irqno, IRQF_VALID);
- }
-
- for (irqno = IRQ_EINT4; irqno <= IRQ_EINT23; irqno++) {
- irqdbf("registering irq %d (extended s3c irq)\n", irqno);
- set_irq_chip(irqno, &s3c_irqext_chip);
- set_irq_handler(irqno, handle_edge_irq);
- set_irq_flags(irqno, IRQF_VALID);
- }
-
- /* register the uart interrupts */
-
- irqdbf("s3c2410: registering external interrupts\n");
-
- for (irqno = IRQ_S3CUART_RX0; irqno <= IRQ_S3CUART_ERR0; irqno++) {
- irqdbf("registering irq %d (s3c uart0 irq)\n", irqno);
- set_irq_chip(irqno, &s3c_irq_uart0);
- set_irq_handler(irqno, handle_level_irq);
- set_irq_flags(irqno, IRQF_VALID);
- }
-
- for (irqno = IRQ_S3CUART_RX1; irqno <= IRQ_S3CUART_ERR1; irqno++) {
- irqdbf("registering irq %d (s3c uart1 irq)\n", irqno);
- set_irq_chip(irqno, &s3c_irq_uart1);
- set_irq_handler(irqno, handle_level_irq);
- set_irq_flags(irqno, IRQF_VALID);
- }
-
- for (irqno = IRQ_S3CUART_RX2; irqno <= IRQ_S3CUART_ERR2; irqno++) {
- irqdbf("registering irq %d (s3c uart2 irq)\n", irqno);
- set_irq_chip(irqno, &s3c_irq_uart2);
- set_irq_handler(irqno, handle_level_irq);
- set_irq_flags(irqno, IRQF_VALID);
- }
-
- for (irqno = IRQ_TC; irqno <= IRQ_ADC; irqno++) {
- irqdbf("registering irq %d (s3c adc irq)\n", irqno);
- set_irq_chip(irqno, &s3c_irq_adc);
- set_irq_handler(irqno, handle_edge_irq);
- set_irq_flags(irqno, IRQF_VALID);
- }
-
- irqdbf("s3c2410: registered interrupt handlers\n");
-}
+arch_initcall(s3c2410_irq_init);
-/***********************************************************************
+/* linux/arch/arm/mach-s3c2410/mach-amlm5900.c
*
* linux/arch/arm/mach-s3c2410/mach-amlm5900.c
*
#include <linux/device.h>
#include <linux/platform_device.h>
#include <linux/proc_fs.h>
-
+#include <linux/serial_core.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/arch/regs-lcd.h>
#include <asm/arch/regs-gpio.h>
-#include "devs.h"
-#include "cpu.h"
+#include <asm/plat-s3c24xx/devs.h>
+#include <asm/plat-s3c24xx/cpu.h>
#ifdef CONFIG_MTD_PARTITIONS
#endif
static struct map_desc amlm5900_iodesc[] __initdata = {
- {
- .virtual = (u32)S3C24XX_VA_SPI,
- .pfn = __phys_to_pfn(S3C2410_PA_SPI),
- .length = SZ_1M,
- .type = MT_DEVICE
- }
};
#define UCON S3C2410_UCON_DEFAULT
#include <linux/serial_8250.h>
-#include "clock.h"
-#include "devs.h"
-#include "cpu.h"
+#include <asm/plat-s3c24xx/clock.h>
+#include <asm/plat-s3c24xx/devs.h>
+#include <asm/plat-s3c24xx/cpu.h>
#include "usb-simtec.h"
#define COPYRIGHT ", (c) 2004-2005 Simtec Electronics"
#include <asm/mach/irq.h>
#include <asm/hardware.h>
-#include <asm/hardware/iomd.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
-
#include <asm/arch/regs-serial.h>
#include <asm/arch/regs-lcd.h>
+#include <asm/arch/regs-gpio.h>
+#include <asm/arch/regs-clock.h>
#include <asm/arch/h1940.h>
#include <asm/arch/h1940-latch.h>
#include <asm/arch/fb.h>
+#include <asm/arch/udc.h>
-#include "clock.h"
-#include "devs.h"
-#include "cpu.h"
-#include "pm.h"
+#include <asm/plat-s3c24xx/clock.h>
+#include <asm/plat-s3c24xx/devs.h>
+#include <asm/plat-s3c24xx/cpu.h>
+#include <asm/plat-s3c24xx/pm.h>
static struct map_desc h1940_iodesc[] __initdata = {
[0] = {
EXPORT_SYMBOL_GPL(h1940_latch_control);
+static void h1940_udc_pullup(enum s3c2410_udc_cmd_e cmd)
+{
+ printk(KERN_DEBUG "udc: pullup(%d)\n",cmd);
+
+ switch (cmd)
+ {
+ case S3C2410_UDC_P_ENABLE :
+ h1940_latch_control(0, H1940_LATCH_USB_DP);
+ break;
+ case S3C2410_UDC_P_DISABLE :
+ h1940_latch_control(H1940_LATCH_USB_DP, 0);
+ break;
+ case S3C2410_UDC_P_RESET :
+ break;
+ default:
+ break;
+ }
+}
+
+static struct s3c2410_udc_mach_info h1940_udc_cfg __initdata = {
+ .udc_command = h1940_udc_pullup,
+ .vbus_pin = S3C2410_GPG5,
+ .vbus_pin_inverted = 1,
+};
+
+
/**
* Set lcd on or off
.bpp= {16,16,16},
};
+static struct platform_device s3c_device_leds = {
+ .name = "h1940-leds",
+ .id = -1,
+};
+
static struct platform_device *h1940_devices[] __initdata = {
&s3c_device_usb,
&s3c_device_lcd,
&s3c_device_wdt,
&s3c_device_i2c,
&s3c_device_iis,
+ &s3c_device_usbgadget,
+ &s3c_device_leds,
};
static struct s3c24xx_board h1940_board __initdata = {
static void __init h1940_init(void)
{
+ u32 tmp;
+
s3c24xx_fb_set_platdata(&h1940_lcdcfg);
+ s3c24xx_udc_set_platdata(&h1940_udc_cfg);
+
+ /* Turn off suspend on both USB ports, and switch the
+ * selectable USB port to USB device mode. */
+
+ s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST |
+ S3C2410_MISCCR_USBSUSPND0 |
+ S3C2410_MISCCR_USBSUSPND1, 0x0);
+
+ tmp = (
+ 0x78 << S3C2410_PLLCON_MDIVSHIFT)
+ | (0x02 << S3C2410_PLLCON_PDIVSHIFT)
+ | (0x03 << S3C2410_PLLCON_SDIVSHIFT);
+ writel(tmp, S3C2410_UPLLCON);
}
MACHINE_START(H1940, "IPAQ-H1940")
.boot_params = S3C2410_SDRAM_PA + 0x100,
.map_io = h1940_map_io,
.init_irq = h1940_init_irq,
- .init_machine = h1940_init,
+ .init_machine = h1940_init,
.timer = &s3c24xx_timer,
MACHINE_END
#include <asm/mach/irq.h>
#include <asm/hardware.h>
-#include <asm/hardware/iomd.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
#include <asm/arch/regs-gpio.h>
#include <asm/arch/iic.h>
-#include "s3c2410.h"
-#include "clock.h"
-#include "devs.h"
-#include "cpu.h"
+#include <asm/plat-s3c24xx/s3c2410.h>
+#include <asm/plat-s3c24xx/clock.h>
+#include <asm/plat-s3c24xx/devs.h>
+#include <asm/plat-s3c24xx/cpu.h>
static struct map_desc n30_iodesc[] __initdata = {
/* nothing here yet */
#include <asm/arch/regs-serial.h>
#include <asm/arch/regs-gpio.h>
-#include "s3c2410.h"
-#include "clock.h"
-#include "devs.h"
-#include "cpu.h"
+#include <asm/plat-s3c24xx/s3c2410.h>
+#include <asm/plat-s3c24xx/clock.h>
+#include <asm/plat-s3c24xx/devs.h>
+#include <asm/plat-s3c24xx/cpu.h>
static struct map_desc otom11_iodesc[] __initdata = {
/* Device area */
--- /dev/null
+/* linux/arch/arm/mach-s3c2410/mach-qt2410.c
+ *
+ * Copyright (C) 2006 by OpenMoko, Inc.
+ * Author: Harald Welte <laforge@openmoko.org>
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/serial_core.h>
+#include <linux/mmc/protocol.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/spi_bitbang.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/nand_ecc.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/hardware.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+#include <asm/arch/regs-gpio.h>
+#include <asm/arch/leds-gpio.h>
+#include <asm/arch/regs-serial.h>
+#include <asm/arch/fb.h>
+#include <asm/arch/nand.h>
+#include <asm/arch/udc.h>
+#include <asm/arch/spi.h>
+#include <asm/arch/spi-gpio.h>
+
+#include <asm/plat-s3c24xx/common-smdk.h>
+#include <asm/plat-s3c24xx/devs.h>
+#include <asm/plat-s3c24xx/cpu.h>
+#include <asm/plat-s3c24xx/pm.h>
+
+static struct map_desc qt2410_iodesc[] __initdata = {
+ { 0xe0000000, __phys_to_pfn(S3C2410_CS3+0x01000000), SZ_1M, MT_DEVICE }
+};
+
+#define UCON S3C2410_UCON_DEFAULT
+#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
+#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
+
+static struct s3c2410_uartcfg smdk2410_uartcfgs[] = {
+ [0] = {
+ .hwport = 0,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ },
+ [1] = {
+ .hwport = 1,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ },
+ [2] = {
+ .hwport = 2,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ }
+};
+
+/* LCD driver info */
+
+/* Configuration for 640x480 SHARP LQ080V3DG01 */
+static struct s3c2410fb_mach_info qt2410_biglcd_cfg __initdata = {
+ .regs = {
+
+ .lcdcon1 = S3C2410_LCDCON1_TFT16BPP |
+ S3C2410_LCDCON1_TFT |
+ S3C2410_LCDCON1_CLKVAL(0x01), /* HCLK/4 */
+
+ .lcdcon2 = S3C2410_LCDCON2_VBPD(18) | /* 19 */
+ S3C2410_LCDCON2_LINEVAL(479) |
+ S3C2410_LCDCON2_VFPD(10) | /* 11 */
+ S3C2410_LCDCON2_VSPW(14), /* 15 */
+
+ .lcdcon3 = S3C2410_LCDCON3_HBPD(43) | /* 44 */
+ S3C2410_LCDCON3_HOZVAL(639) | /* 640 */
+ S3C2410_LCDCON3_HFPD(115), /* 116 */
+
+ .lcdcon4 = S3C2410_LCDCON4_MVAL(0) |
+ S3C2410_LCDCON4_HSPW(95), /* 96 */
+
+ .lcdcon5 = S3C2410_LCDCON5_FRM565 |
+ S3C2410_LCDCON5_INVVLINE |
+ S3C2410_LCDCON5_INVVFRAME |
+ S3C2410_LCDCON5_PWREN |
+ S3C2410_LCDCON5_HWSWP,
+ },
+
+ .lpcsel = ((0xCE6) & ~7) | 1<<4,
+
+ .width = 640,
+ .height = 480,
+
+ .xres = {
+ .min = 640,
+ .max = 640,
+ .defval = 640,
+ },
+
+ .yres = {
+ .min = 480,
+ .max = 480,
+ .defval = 480,
+ },
+
+ .bpp = {
+ .min = 16,
+ .max = 16,
+ .defval = 16,
+ },
+};
+
+/* Configuration for 480x640 toppoly TD028TTEC1 */
+static struct s3c2410fb_mach_info qt2410_prodlcd_cfg __initdata = {
+ .regs = {
+
+ .lcdcon1 = S3C2410_LCDCON1_TFT16BPP |
+ S3C2410_LCDCON1_TFT |
+ S3C2410_LCDCON1_CLKVAL(0x01), /* HCLK/4 */
+
+ .lcdcon2 = S3C2410_LCDCON2_VBPD(1) | /* 2 */
+ S3C2410_LCDCON2_LINEVAL(639) |/* 640 */
+ S3C2410_LCDCON2_VFPD(3) | /* 4 */
+ S3C2410_LCDCON2_VSPW(1), /* 2 */
+
+ .lcdcon3 = S3C2410_LCDCON3_HBPD(7) | /* 8 */
+ S3C2410_LCDCON3_HOZVAL(479) | /* 479 */
+ S3C2410_LCDCON3_HFPD(23), /* 24 */
+
+ .lcdcon4 = S3C2410_LCDCON4_MVAL(0) |
+ S3C2410_LCDCON4_HSPW(7), /* 8 */
+
+ .lcdcon5 = S3C2410_LCDCON5_FRM565 |
+ S3C2410_LCDCON5_INVVLINE |
+ S3C2410_LCDCON5_INVVFRAME |
+ S3C2410_LCDCON5_PWREN |
+ S3C2410_LCDCON5_HWSWP,
+ },
+
+ .lpcsel = ((0xCE6) & ~7) | 1<<4,
+
+ .width = 480,
+ .height = 640,
+
+ .xres = {
+ .min = 480,
+ .max = 480,
+ .defval = 480,
+ },
+
+ .yres = {
+ .min = 640,
+ .max = 640,
+ .defval = 640,
+ },
+
+ .bpp = {
+ .min = 16,
+ .max = 16,
+ .defval = 16,
+ },
+};
+
+/* Config for 240x320 LCD */
+static struct s3c2410fb_mach_info qt2410_lcd_cfg __initdata = {
+ .regs = {
+
+ .lcdcon1 = S3C2410_LCDCON1_TFT16BPP |
+ S3C2410_LCDCON1_TFT |
+ S3C2410_LCDCON1_CLKVAL(0x04),
+
+ .lcdcon2 = S3C2410_LCDCON2_VBPD(1) |
+ S3C2410_LCDCON2_LINEVAL(319) |
+ S3C2410_LCDCON2_VFPD(6) |
+ S3C2410_LCDCON2_VSPW(3),
+
+ .lcdcon3 = S3C2410_LCDCON3_HBPD(12) |
+ S3C2410_LCDCON3_HOZVAL(239) |
+ S3C2410_LCDCON3_HFPD(7),
+
+ .lcdcon4 = S3C2410_LCDCON4_MVAL(0) |
+ S3C2410_LCDCON4_HSPW(3),
+
+ .lcdcon5 = S3C2410_LCDCON5_FRM565 |
+ S3C2410_LCDCON5_INVVLINE |
+ S3C2410_LCDCON5_INVVFRAME |
+ S3C2410_LCDCON5_PWREN |
+ S3C2410_LCDCON5_HWSWP,
+ },
+
+ .lpcsel = ((0xCE6) & ~7) | 1<<4,
+
+ .width = 240,
+ .height = 320,
+
+ .xres = {
+ .min = 240,
+ .max = 240,
+ .defval = 240,
+ },
+
+ .yres = {
+ .min = 320,
+ .max = 320,
+ .defval = 320,
+ },
+
+ .bpp = {
+ .min = 16,
+ .max = 16,
+ .defval = 16,
+ },
+};
+
+/* CS8900 */
+
+static struct resource qt2410_cs89x0_resources[] = {
+ [0] = {
+ .start = 0x19000000,
+ .end = 0x19000000 + 16,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_EINT9,
+ .end = IRQ_EINT9,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device qt2410_cs89x0 = {
+ .name = "cirrus-cs89x0",
+ .num_resources = ARRAY_SIZE(qt2410_cs89x0_resources),
+ .resource = qt2410_cs89x0_resources,
+};
+
+/* LED */
+
+static struct s3c24xx_led_platdata qt2410_pdata_led = {
+ .gpio = S3C2410_GPB0,
+ .flags = S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
+ .name = "led",
+ .def_trigger = "timer",
+};
+
+static struct platform_device qt2410_led = {
+ .name = "s3c24xx_led",
+ .id = 0,
+ .dev = {
+ .platform_data = &qt2410_pdata_led,
+ },
+};
+
+/* SPI */
+
+static void spi_gpio_cs(struct s3c2410_spigpio_info *spi, int cs)
+{
+ switch (cs) {
+ case BITBANG_CS_ACTIVE:
+ s3c2410_gpio_setpin(S3C2410_GPB5, 0);
+ break;
+ case BITBANG_CS_INACTIVE:
+ s3c2410_gpio_setpin(S3C2410_GPB5, 1);
+ break;
+ }
+}
+
+static struct s3c2410_spigpio_info spi_gpio_cfg = {
+ .pin_clk = S3C2410_GPG7,
+ .pin_mosi = S3C2410_GPG6,
+ .pin_miso = S3C2410_GPG5,
+ .chip_select = &spi_gpio_cs,
+};
+
+
+static struct platform_device qt2410_spi = {
+ .name = "s3c24xx-spi-gpio",
+ .id = 1,
+ .dev = {
+ .platform_data = &spi_gpio_cfg,
+ },
+};
+
+/* Board devices */
+
+static struct platform_device *qt2410_devices[] __initdata = {
+ &s3c_device_usb,
+ &s3c_device_lcd,
+ &s3c_device_wdt,
+ &s3c_device_i2c,
+ &s3c_device_iis,
+ &s3c_device_sdi,
+ &s3c_device_usbgadget,
+ &qt2410_spi,
+ &qt2410_cs89x0,
+ &qt2410_led,
+};
+
+static struct s3c24xx_board qt2410_board __initdata = {
+ .devices = qt2410_devices,
+ .devices_count = ARRAY_SIZE(qt2410_devices)
+};
+
+static struct mtd_partition qt2410_nand_part[] = {
+ [0] = {
+ .name = "U-Boot",
+ .size = 0x30000,
+ .offset = 0,
+ },
+ [1] = {
+ .name = "U-Boot environment",
+ .offset = 0x30000,
+ .size = 0x4000,
+ },
+ [2] = {
+ .name = "kernel",
+ .offset = 0x34000,
+ .size = SZ_2M,
+ },
+ [3] = {
+ .name = "initrd",
+ .offset = 0x234000,
+ .size = SZ_4M,
+ },
+ [4] = {
+ .name = "jffs2",
+ .offset = 0x634000,
+ .size = 0x39cc000,
+ },
+};
+
+static struct s3c2410_nand_set qt2410_nand_sets[] = {
+ [0] = {
+ .name = "NAND",
+ .nr_chips = 1,
+ .nr_partitions = ARRAY_SIZE(qt2410_nand_part),
+ .partitions = qt2410_nand_part,
+ },
+};
+
+/* choose a set of timings which should suit most 512Mbit
+ * chips and beyond.
+ */
+
+static struct s3c2410_platform_nand qt2410_nand_info = {
+ .tacls = 20,
+ .twrph0 = 60,
+ .twrph1 = 20,
+ .nr_sets = ARRAY_SIZE(qt2410_nand_sets),
+ .sets = qt2410_nand_sets,
+};
+
+/* UDC */
+
+static struct s3c2410_udc_mach_info qt2410_udc_cfg = {
+};
+
+static char tft_type = 's';
+
+static int __init qt2410_tft_setup(char *str)
+{
+ tft_type = str[0];
+ return 1;
+}
+
+__setup("tft=", qt2410_tft_setup);
+
+static void __init qt2410_map_io(void)
+{
+ s3c24xx_init_io(qt2410_iodesc, ARRAY_SIZE(qt2410_iodesc));
+ s3c24xx_init_clocks(12*1000*1000);
+ s3c24xx_init_uarts(smdk2410_uartcfgs, ARRAY_SIZE(smdk2410_uartcfgs));
+ s3c24xx_set_board(&qt2410_board);
+}
+
+static void __init qt2410_machine_init(void)
+{
+ s3c_device_nand.dev.platform_data = &qt2410_nand_info;
+
+ switch (tft_type) {
+ case 'p': /* production */
+ s3c24xx_fb_set_platdata(&qt2410_prodlcd_cfg);
+ break;
+ case 'b': /* big */
+ s3c24xx_fb_set_platdata(&qt2410_biglcd_cfg);
+ break;
+ case 's': /* small */
+ default:
+ s3c24xx_fb_set_platdata(&qt2410_lcd_cfg);
+ break;
+ }
+
+ s3c2410_gpio_cfgpin(S3C2410_GPB0, S3C2410_GPIO_OUTPUT);
+ s3c2410_gpio_setpin(S3C2410_GPB0, 1);
+
+ s3c24xx_udc_set_platdata(&qt2410_udc_cfg);
+
+ s3c2410_gpio_cfgpin(S3C2410_GPB5, S3C2410_GPIO_OUTPUT);
+
+ s3c2410_pm_init();
+}
+
+MACHINE_START(QT2410, "QT2410")
+ .phys_io = S3C2410_PA_UART,
+ .io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
+ .boot_params = S3C2410_SDRAM_PA + 0x100,
+ .map_io = qt2410_map_io,
+ .init_irq = s3c24xx_init_irq,
+ .init_machine = qt2410_machine_init,
+ .timer = &s3c24xx_timer,
+MACHINE_END
+
+
-/***********************************************************************
+/* linux/arch/arm/mach-s3c2410/mach-smdk2410.c
*
* linux/arch/arm/mach-s3c2410/mach-smdk2410.c
*
#include <asm/arch/regs-serial.h>
-#include "devs.h"
-#include "cpu.h"
+#include <asm/plat-s3c24xx/devs.h>
+#include <asm/plat-s3c24xx/cpu.h>
-#include "common-smdk.h"
+#include <asm/plat-s3c24xx/common-smdk.h>
static struct map_desc smdk2410_iodesc[] __initdata = {
/* nothing here yet */
#include <asm/arch/regs-gpio.h>
#include <asm/arch/leds-gpio.h>
-#include "clock.h"
-#include "devs.h"
-#include "cpu.h"
+#include <asm/plat-s3c24xx/clock.h>
+#include <asm/plat-s3c24xx/devs.h>
+#include <asm/plat-s3c24xx/cpu.h>
#include "usb-simtec.h"
/* macros for virtual address mods for the io space entries */
/* linux/arch/arm/mach-s3c2410/pm.c
*
- * Copyright (c) 2004,2006 Simtec Electronics
+ * Copyright (c) 2006 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
*
- * S3C24XX Power Manager (Suspend-To-RAM) support
- *
- * See Documentation/arm/Samsung-S3C24XX/Suspend.txt for more information
+ * S3C2410 (and compatible) Power Manager (Suspend-To-RAM) support
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- * Parts based on arch/arm/mach-pxa/pm.c
- *
- * Thanks to Dimitry Andric for debugging
*/
#include <linux/init.h>
#include <linux/suspend.h>
#include <linux/errno.h>
#include <linux/time.h>
-#include <linux/interrupt.h>
-#include <linux/crc32.h>
-#include <linux/ioport.h>
-#include <linux/delay.h>
-#include <linux/serial_core.h>
+#include <linux/sysdev.h>
-#include <asm/cacheflush.h>
#include <asm/hardware.h>
#include <asm/io.h>
-#include <asm/arch/regs-serial.h>
-#include <asm/arch/regs-clock.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/regs-mem.h>
-#include <asm/arch/regs-irq.h>
-
-#include <asm/mach/time.h>
-
-#include "pm.h"
-
-/* for external use */
-
-unsigned long s3c_pm_flags;
-
-#define PFX "s3c24xx-pm: "
-
-static struct sleep_save core_save[] = {
- SAVE_ITEM(S3C2410_LOCKTIME),
- SAVE_ITEM(S3C2410_CLKCON),
-
- /* we restore the timings here, with the proviso that the board
- * brings the system up in an slower, or equal frequency setting
- * to the original system.
- *
- * if we cannot guarantee this, then things are going to go very
- * wrong here, as we modify the refresh and both pll settings.
- */
-
- SAVE_ITEM(S3C2410_BWSCON),
- SAVE_ITEM(S3C2410_BANKCON0),
- SAVE_ITEM(S3C2410_BANKCON1),
- SAVE_ITEM(S3C2410_BANKCON2),
- SAVE_ITEM(S3C2410_BANKCON3),
- SAVE_ITEM(S3C2410_BANKCON4),
- SAVE_ITEM(S3C2410_BANKCON5),
-
- SAVE_ITEM(S3C2410_CLKDIVN),
- SAVE_ITEM(S3C2410_MPLLCON),
- SAVE_ITEM(S3C2410_UPLLCON),
- SAVE_ITEM(S3C2410_CLKSLOW),
- SAVE_ITEM(S3C2410_REFRESH),
-};
-
-static struct sleep_save gpio_save[] = {
- SAVE_ITEM(S3C2410_GPACON),
- SAVE_ITEM(S3C2410_GPADAT),
-
- SAVE_ITEM(S3C2410_GPBCON),
- SAVE_ITEM(S3C2410_GPBDAT),
- SAVE_ITEM(S3C2410_GPBUP),
-
- SAVE_ITEM(S3C2410_GPCCON),
- SAVE_ITEM(S3C2410_GPCDAT),
- SAVE_ITEM(S3C2410_GPCUP),
-
- SAVE_ITEM(S3C2410_GPDCON),
- SAVE_ITEM(S3C2410_GPDDAT),
- SAVE_ITEM(S3C2410_GPDUP),
-
- SAVE_ITEM(S3C2410_GPECON),
- SAVE_ITEM(S3C2410_GPEDAT),
- SAVE_ITEM(S3C2410_GPEUP),
-
- SAVE_ITEM(S3C2410_GPFCON),
- SAVE_ITEM(S3C2410_GPFDAT),
- SAVE_ITEM(S3C2410_GPFUP),
+#include <asm/mach-types.h>
- SAVE_ITEM(S3C2410_GPGCON),
- SAVE_ITEM(S3C2410_GPGDAT),
- SAVE_ITEM(S3C2410_GPGUP),
-
- SAVE_ITEM(S3C2410_GPHCON),
- SAVE_ITEM(S3C2410_GPHDAT),
- SAVE_ITEM(S3C2410_GPHUP),
+#include <asm/arch/regs-gpio.h>
+#include <asm/arch/h1940.h>
- SAVE_ITEM(S3C2410_DCLKCON),
-};
+#include <asm/plat-s3c24xx/cpu.h>
+#include <asm/plat-s3c24xx/pm.h>
#ifdef CONFIG_S3C2410_PM_DEBUG
-
-#define SAVE_UART(va) \
- SAVE_ITEM((va) + S3C2410_ULCON), \
- SAVE_ITEM((va) + S3C2410_UCON), \
- SAVE_ITEM((va) + S3C2410_UFCON), \
- SAVE_ITEM((va) + S3C2410_UMCON), \
- SAVE_ITEM((va) + S3C2410_UBRDIV)
-
-static struct sleep_save uart_save[] = {
- SAVE_UART(S3C24XX_VA_UART0),
- SAVE_UART(S3C24XX_VA_UART1),
-#ifndef CONFIG_CPU_S3C2400
- SAVE_UART(S3C24XX_VA_UART2),
-#endif
-};
-
-/* debug
- *
- * we send the debug to printascii() to allow it to be seen if the
- * system never wakes up from the sleep
-*/
-
-extern void printascii(const char *);
-
-void pm_dbg(const char *fmt, ...)
-{
- va_list va;
- char buff[256];
-
- va_start(va, fmt);
- vsprintf(buff, fmt, va);
- va_end(va);
-
- printascii(buff);
-}
-
-static void s3c2410_pm_debug_init(void)
-{
- unsigned long tmp = __raw_readl(S3C2410_CLKCON);
-
- /* re-start uart clocks */
- tmp |= S3C2410_CLKCON_UART0;
- tmp |= S3C2410_CLKCON_UART1;
- tmp |= S3C2410_CLKCON_UART2;
-
- __raw_writel(tmp, S3C2410_CLKCON);
- udelay(10);
-}
-
+extern void pm_dbg(const char *fmt, ...);
#define DBG(fmt...) pm_dbg(fmt)
#else
#define DBG(fmt...) printk(KERN_DEBUG fmt)
-
-#define s3c2410_pm_debug_init() do { } while(0)
-
-static struct sleep_save uart_save[] = {};
#endif
-#if defined(CONFIG_S3C2410_PM_CHECK) && CONFIG_S3C2410_PM_CHECK_CHUNKSIZE != 0
-
-/* suspend checking code...
- *
- * this next area does a set of crc checks over all the installed
- * memory, so the system can verify if the resume was ok.
- *
- * CONFIG_S3C2410_PM_CHECK_CHUNKSIZE defines the block-size for the CRC,
- * increasing it will mean that the area corrupted will be less easy to spot,
- * and reducing the size will cause the CRC save area to grow
-*/
-
-#define CHECK_CHUNKSIZE (CONFIG_S3C2410_PM_CHECK_CHUNKSIZE * 1024)
-
-static u32 crc_size; /* size needed for the crc block */
-static u32 *crcs; /* allocated over suspend/resume */
-
-typedef u32 *(run_fn_t)(struct resource *ptr, u32 *arg);
-
-/* s3c2410_pm_run_res
- *
- * go thorugh the given resource list, and look for system ram
-*/
-
-static void s3c2410_pm_run_res(struct resource *ptr, run_fn_t fn, u32 *arg)
-{
- while (ptr != NULL) {
- if (ptr->child != NULL)
- s3c2410_pm_run_res(ptr->child, fn, arg);
-
- if ((ptr->flags & IORESOURCE_MEM) &&
- strcmp(ptr->name, "System RAM") == 0) {
- DBG("Found system RAM at %08lx..%08lx\n",
- ptr->start, ptr->end);
- arg = (fn)(ptr, arg);
- }
-
- ptr = ptr->sibling;
- }
-}
-
-static void s3c2410_pm_run_sysram(run_fn_t fn, u32 *arg)
-{
- s3c2410_pm_run_res(&iomem_resource, fn, arg);
-}
-
-static u32 *s3c2410_pm_countram(struct resource *res, u32 *val)
-{
- u32 size = (u32)(res->end - res->start)+1;
-
- size += CHECK_CHUNKSIZE-1;
- size /= CHECK_CHUNKSIZE;
-
- DBG("Area %08lx..%08lx, %d blocks\n", res->start, res->end, size);
-
- *val += size * sizeof(u32);
- return val;
-}
-
-/* s3c2410_pm_prepare_check
- *
- * prepare the necessary information for creating the CRCs. This
- * must be done before the final save, as it will require memory
- * allocating, and thus touching bits of the kernel we do not
- * know about.
-*/
-
-static void s3c2410_pm_check_prepare(void)
+static void s3c2410_pm_prepare(void)
{
- crc_size = 0;
+ /* ensure at least GSTATUS3 has the resume address */
- s3c2410_pm_run_sysram(s3c2410_pm_countram, &crc_size);
+ __raw_writel(virt_to_phys(s3c2410_cpu_resume), S3C2410_GSTATUS3);
- DBG("s3c2410_pm_prepare_check: %u checks needed\n", crc_size);
+ DBG("GSTATUS3 0x%08x\n", __raw_readl(S3C2410_GSTATUS3));
+ DBG("GSTATUS4 0x%08x\n", __raw_readl(S3C2410_GSTATUS4));
- crcs = kmalloc(crc_size+4, GFP_KERNEL);
- if (crcs == NULL)
- printk(KERN_ERR "Cannot allocated CRC save area\n");
-}
+ if (machine_is_h1940()) {
+ void *base = phys_to_virt(H1940_SUSPEND_CHECK);
+ unsigned long ptr;
+ unsigned long calc = 0;
-static u32 *s3c2410_pm_makecheck(struct resource *res, u32 *val)
-{
- unsigned long addr, left;
+ /* generate check for the bootloader to check on resume */
- for (addr = res->start; addr < res->end;
- addr += CHECK_CHUNKSIZE) {
- left = res->end - addr;
+ for (ptr = 0; ptr < 0x40000; ptr += 0x400)
+ calc += __raw_readl(base+ptr);
- if (left > CHECK_CHUNKSIZE)
- left = CHECK_CHUNKSIZE;
-
- *val = crc32_le(~0, phys_to_virt(addr), left);
- val++;
+ __raw_writel(calc, phys_to_virt(H1940_SUSPEND_CHECKSUM));
}
- return val;
-}
-
-/* s3c2410_pm_check_store
- *
- * compute the CRC values for the memory blocks before the final
- * sleep.
-*/
-
-static void s3c2410_pm_check_store(void)
-{
- if (crcs != NULL)
- s3c2410_pm_run_sysram(s3c2410_pm_makecheck, crcs);
-}
-
-/* in_region
- *
- * return TRUE if the area defined by ptr..ptr+size contatins the
- * what..what+whatsz
-*/
-
-static inline int in_region(void *ptr, int size, void *what, size_t whatsz)
-{
- if ((what+whatsz) < ptr)
- return 0;
-
- if (what > (ptr+size))
- return 0;
-
- return 1;
-}
-
-static u32 *s3c2410_pm_runcheck(struct resource *res, u32 *val)
-{
- void *save_at = phys_to_virt(s3c2410_sleep_save_phys);
- unsigned long addr;
- unsigned long left;
- void *ptr;
- u32 calc;
-
- for (addr = res->start; addr < res->end;
- addr += CHECK_CHUNKSIZE) {
- left = res->end - addr;
+ /* the RX3715 uses similar code and the same H1940 and the
+ * same offsets for resume and checksum pointers */
- if (left > CHECK_CHUNKSIZE)
- left = CHECK_CHUNKSIZE;
+ if (machine_is_rx3715()) {
+ void *base = phys_to_virt(H1940_SUSPEND_CHECK);
+ unsigned long ptr;
+ unsigned long calc = 0;
- ptr = phys_to_virt(addr);
+ /* generate check for the bootloader to check on resume */
- if (in_region(ptr, left, crcs, crc_size)) {
- DBG("skipping %08lx, has crc block in\n", addr);
- goto skip_check;
- }
+ for (ptr = 0; ptr < 0x40000; ptr += 0x4)
+ calc += __raw_readl(base+ptr);
- if (in_region(ptr, left, save_at, 32*4 )) {
- DBG("skipping %08lx, has save block in\n", addr);
- goto skip_check;
- }
-
- /* calculate and check the checksum */
-
- calc = crc32_le(~0, ptr, left);
- if (calc != *val) {
- printk(KERN_ERR PFX "Restore CRC error at "
- "%08lx (%08x vs %08x)\n", addr, calc, *val);
-
- DBG("Restore CRC error at %08lx (%08x vs %08x)\n",
- addr, calc, *val);
- }
-
- skip_check:
- val++;
+ __raw_writel(calc, phys_to_virt(H1940_SUSPEND_CHECKSUM));
}
- return val;
-}
+ if ( machine_is_aml_m5900() )
+ s3c2410_gpio_setpin(S3C2410_GPF2, 1);
-/* s3c2410_pm_check_restore
- *
- * check the CRCs after the restore event and free the memory used
- * to hold them
-*/
-
-static void s3c2410_pm_check_restore(void)
-{
- if (crcs != NULL) {
- s3c2410_pm_run_sysram(s3c2410_pm_runcheck, crcs);
- kfree(crcs);
- crcs = NULL;
- }
}
-#else
-
-#define s3c2410_pm_check_prepare() do { } while(0)
-#define s3c2410_pm_check_restore() do { } while(0)
-#define s3c2410_pm_check_store() do { } while(0)
-#endif
-
-/* helper functions to save and restore register state */
-
-void s3c2410_pm_do_save(struct sleep_save *ptr, int count)
+static int s3c2410_pm_resume(struct sys_device *dev)
{
- for (; count > 0; count--, ptr++) {
- ptr->val = __raw_readl(ptr->reg);
- DBG("saved %p value %08lx\n", ptr->reg, ptr->val);
- }
-}
+ unsigned long tmp;
-/* s3c2410_pm_do_restore
- *
- * restore the system from the given list of saved registers
- *
- * Note, we do not use DBG() in here, as the system may not have
- * restore the UARTs state yet
-*/
+ /* unset the return-from-sleep flag, to ensure reset */
-void s3c2410_pm_do_restore(struct sleep_save *ptr, int count)
-{
- for (; count > 0; count--, ptr++) {
- printk(KERN_DEBUG "restore %p (restore %08lx, was %08x)\n",
- ptr->reg, ptr->val, __raw_readl(ptr->reg));
-
- __raw_writel(ptr->val, ptr->reg);
- }
-}
+ tmp = __raw_readl(S3C2410_GSTATUS2);
+ tmp &= S3C2410_GSTATUS2_OFFRESET;
+ __raw_writel(tmp, S3C2410_GSTATUS2);
-/* s3c2410_pm_do_restore_core
- *
- * similar to s3c2410_pm_do_restore_core
- *
- * WARNING: Do not put any debug in here that may effect memory or use
- * peripherals, as things may be changing!
-*/
+ if ( machine_is_aml_m5900() )
+ s3c2410_gpio_setpin(S3C2410_GPF2, 0);
-static void s3c2410_pm_do_restore_core(struct sleep_save *ptr, int count)
-{
- for (; count > 0; count--, ptr++) {
- __raw_writel(ptr->val, ptr->reg);
- }
+ return 0;
}
-/* s3c2410_pm_show_resume_irqs
- *
- * print any IRQs asserted at resume time (ie, we woke from)
-*/
-
-static void s3c2410_pm_show_resume_irqs(int start, unsigned long which,
- unsigned long mask)
+static int s3c2410_pm_add(struct sys_device *dev)
{
- int i;
+ pm_cpu_prep = s3c2410_pm_prepare;
+ pm_cpu_sleep = s3c2410_cpu_suspend;
- which &= ~mask;
-
- for (i = 0; i <= 31; i++) {
- if ((which) & (1L<<i)) {
- DBG("IRQ %d asserted at resume\n", start+i);
- }
- }
+ return 0;
}
-/* s3c2410_pm_check_resume_pin
- *
- * check to see if the pin is configured correctly for sleep mode, and
- * make any necessary adjustments if it is not
-*/
-
-static void s3c2410_pm_check_resume_pin(unsigned int pin, unsigned int irqoffs)
-{
- unsigned long irqstate;
- unsigned long pinstate;
- int irq = s3c2410_gpio_getirq(pin);
-
- if (irqoffs < 4)
- irqstate = s3c_irqwake_intmask & (1L<<irqoffs);
- else
- irqstate = s3c_irqwake_eintmask & (1L<<irqoffs);
-
- pinstate = s3c2410_gpio_getcfg(pin);
-
- if (!irqstate) {
- if (pinstate == S3C2410_GPIO_IRQ)
- DBG("Leaving IRQ %d (pin %d) enabled\n", irq, pin);
- } else {
- if (pinstate == S3C2410_GPIO_IRQ) {
- DBG("Disabling IRQ %d (pin %d)\n", irq, pin);
- s3c2410_gpio_cfgpin(pin, S3C2410_GPIO_INPUT);
- }
- }
-}
+#if defined(CONFIG_CPU_S3C2410)
+static struct sysdev_driver s3c2410_pm_driver = {
+ .add = s3c2410_pm_add,
+ .resume = s3c2410_pm_resume,
+};
-/* s3c2410_pm_configure_extint
- *
- * configure all external interrupt pins
-*/
+/* register ourselves */
-static void s3c2410_pm_configure_extint(void)
+static int __init s3c2410_pm_drvinit(void)
{
- int pin;
-
- /* for each of the external interrupts (EINT0..EINT15) we
- * need to check wether it is an external interrupt source,
- * and then configure it as an input if it is not
- */
-
- for (pin = S3C2410_GPF0; pin <= S3C2410_GPF7; pin++) {
- s3c2410_pm_check_resume_pin(pin, pin - S3C2410_GPF0);
- }
-
- for (pin = S3C2410_GPG0; pin <= S3C2410_GPG7; pin++) {
- s3c2410_pm_check_resume_pin(pin, (pin - S3C2410_GPG0)+8);
- }
+ return sysdev_driver_register(&s3c2410_sysclass, &s3c2410_pm_driver);
}
-void (*pm_cpu_prep)(void);
-void (*pm_cpu_sleep)(void);
-
-#define any_allowed(mask, allow) (((mask) & (allow)) != (allow))
-
-/* s3c2410_pm_enter
- *
- * central control for sleep/resume process
-*/
-
-static int s3c2410_pm_enter(suspend_state_t state)
-{
- unsigned long regs_save[16];
-
- /* ensure the debug is initialised (if enabled) */
-
- s3c2410_pm_debug_init();
-
- DBG("s3c2410_pm_enter(%d)\n", state);
-
- if (pm_cpu_prep == NULL || pm_cpu_sleep == NULL) {
- printk(KERN_ERR PFX "error: no cpu sleep functions set\n");
- return -EINVAL;
- }
-
- if (state != PM_SUSPEND_MEM) {
- printk(KERN_ERR PFX "error: only PM_SUSPEND_MEM supported\n");
- return -EINVAL;
- }
-
- /* check if we have anything to wake-up with... bad things seem
- * to happen if you suspend with no wakeup (system will often
- * require a full power-cycle)
- */
-
- if (!any_allowed(s3c_irqwake_intmask, s3c_irqwake_intallow) &&
- !any_allowed(s3c_irqwake_eintmask, s3c_irqwake_eintallow)) {
- printk(KERN_ERR PFX "No sources enabled for wake-up!\n");
- printk(KERN_ERR PFX "Aborting sleep\n");
- return -EINVAL;
- }
-
- /* prepare check area if configured */
-
- s3c2410_pm_check_prepare();
-
- /* store the physical address of the register recovery block */
-
- s3c2410_sleep_save_phys = virt_to_phys(regs_save);
-
- DBG("s3c2410_sleep_save_phys=0x%08lx\n", s3c2410_sleep_save_phys);
-
- /* save all necessary core registers not covered by the drivers */
-
- s3c2410_pm_do_save(gpio_save, ARRAY_SIZE(gpio_save));
- s3c2410_pm_do_save(core_save, ARRAY_SIZE(core_save));
- s3c2410_pm_do_save(uart_save, ARRAY_SIZE(uart_save));
-
- /* set the irq configuration for wake */
-
- s3c2410_pm_configure_extint();
-
- DBG("sleep: irq wakeup masks: %08lx,%08lx\n",
- s3c_irqwake_intmask, s3c_irqwake_eintmask);
-
- __raw_writel(s3c_irqwake_intmask, S3C2410_INTMSK);
- __raw_writel(s3c_irqwake_eintmask, S3C2410_EINTMASK);
-
- /* ack any outstanding external interrupts before we go to sleep */
-
- __raw_writel(__raw_readl(S3C2410_EINTPEND), S3C2410_EINTPEND);
- __raw_writel(__raw_readl(S3C2410_INTPND), S3C2410_INTPND);
- __raw_writel(__raw_readl(S3C2410_SRCPND), S3C2410_SRCPND);
-
- /* call cpu specific preperation */
-
- pm_cpu_prep();
-
- /* flush cache back to ram */
-
- flush_cache_all();
-
- s3c2410_pm_check_store();
-
- /* send the cpu to sleep... */
-
- __raw_writel(0x00, S3C2410_CLKCON); /* turn off clocks over sleep */
-
- /* s3c2410_cpu_save will also act as our return point from when
- * we resume as it saves its own register state, so use the return
- * code to differentiate return from save and return from sleep */
-
- if (s3c2410_cpu_save(regs_save) == 0) {
- flush_cache_all();
- pm_cpu_sleep();
- }
-
- /* restore the cpu state */
-
- cpu_init();
-
- /* restore the system state */
-
- s3c2410_pm_do_restore_core(core_save, ARRAY_SIZE(core_save));
- s3c2410_pm_do_restore(gpio_save, ARRAY_SIZE(gpio_save));
- s3c2410_pm_do_restore(uart_save, ARRAY_SIZE(uart_save));
-
- s3c2410_pm_debug_init();
-
- /* check what irq (if any) restored the system */
-
- DBG("post sleep: IRQs 0x%08x, 0x%08x\n",
- __raw_readl(S3C2410_SRCPND),
- __raw_readl(S3C2410_EINTPEND));
-
- s3c2410_pm_show_resume_irqs(IRQ_EINT0, __raw_readl(S3C2410_SRCPND),
- s3c_irqwake_intmask);
-
- s3c2410_pm_show_resume_irqs(IRQ_EINT4-4, __raw_readl(S3C2410_EINTPEND),
- s3c_irqwake_eintmask);
-
- DBG("post sleep, preparing to return\n");
-
- s3c2410_pm_check_restore();
-
- /* ok, let's return from sleep */
+arch_initcall(s3c2410_pm_drvinit);
+#endif
- DBG("S3C2410 PM Resume (post-restore)\n");
- return 0;
-}
+#if defined(CONFIG_CPU_S3C2440)
+static struct sysdev_driver s3c2440_pm_driver = {
+ .add = s3c2410_pm_add,
+ .resume = s3c2410_pm_resume,
+};
-/*
- * Called after processes are frozen, but before we shut down devices.
- */
-static int s3c2410_pm_prepare(suspend_state_t state)
+static int __init s3c2440_pm_drvinit(void)
{
- return 0;
+ return sysdev_driver_register(&s3c2440_sysclass, &s3c2440_pm_driver);
}
-/*
- * Called after devices are re-setup, but before processes are thawed.
- */
-static int s3c2410_pm_finish(suspend_state_t state)
-{
- return 0;
-}
+arch_initcall(s3c2440_pm_drvinit);
+#endif
-/*
- * Set to PM_DISK_FIRMWARE so we can quickly veto suspend-to-disk.
- */
-static struct pm_ops s3c2410_pm_ops = {
- .pm_disk_mode = PM_DISK_FIRMWARE,
- .prepare = s3c2410_pm_prepare,
- .enter = s3c2410_pm_enter,
- .finish = s3c2410_pm_finish,
+#if defined(CONFIG_CPU_S3C2442)
+static struct sysdev_driver s3c2442_pm_driver = {
+ .add = s3c2410_pm_add,
+ .resume = s3c2410_pm_resume,
};
-/* s3c2410_pm_init
- *
- * Attach the power management functions. This should be called
- * from the board specific initialisation if the board supports
- * it.
-*/
-
-int __init s3c2410_pm_init(void)
+static int __init s3c2442_pm_drvinit(void)
{
- printk("S3C2410 Power Management, (c) 2004 Simtec Electronics\n");
-
- pm_set_ops(&s3c2410_pm_ops);
- return 0;
+ return sysdev_driver_register(&s3c2442_sysclass, &s3c2442_pm_driver);
}
+
+arch_initcall(s3c2442_pm_drvinit);
+#endif
+++ /dev/null
-/* linux/arch/arm/mach-s3c2410/s3c2410-clock.c
- *
- * Copyright (c) 2006 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2410,S3C2440,S3C2442 Clock control support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/sysdev.h>
-#include <linux/clk.h>
-#include <linux/mutex.h>
-#include <linux/delay.h>
-#include <linux/serial_core.h>
-
-#include <asm/mach/map.h>
-
-#include <asm/hardware.h>
-#include <asm/io.h>
-
-#include <asm/arch/regs-serial.h>
-#include <asm/arch/regs-clock.h>
-#include <asm/arch/regs-gpio.h>
-
-#include "s3c2410.h"
-#include "clock.h"
-#include "cpu.h"
-
-int s3c2410_clkcon_enable(struct clk *clk, int enable)
-{
- unsigned int clocks = clk->ctrlbit;
- unsigned long clkcon;
-
- clkcon = __raw_readl(S3C2410_CLKCON);
-
- if (enable)
- clkcon |= clocks;
- else
- clkcon &= ~clocks;
-
- /* ensure none of the special function bits set */
- clkcon &= ~(S3C2410_CLKCON_IDLE|S3C2410_CLKCON_POWER);
-
- __raw_writel(clkcon, S3C2410_CLKCON);
-
- return 0;
-}
-
-static int s3c2410_upll_enable(struct clk *clk, int enable)
-{
- unsigned long clkslow = __raw_readl(S3C2410_CLKSLOW);
- unsigned long orig = clkslow;
-
- if (enable)
- clkslow &= ~S3C2410_CLKSLOW_UCLK_OFF;
- else
- clkslow |= S3C2410_CLKSLOW_UCLK_OFF;
-
- __raw_writel(clkslow, S3C2410_CLKSLOW);
-
- /* if we started the UPLL, then allow to settle */
-
- if (enable && (orig & S3C2410_CLKSLOW_UCLK_OFF))
- udelay(200);
-
- return 0;
-}
-
-/* standard clock definitions */
-
-static struct clk init_clocks_disable[] = {
- {
- .name = "nand",
- .id = -1,
- .parent = &clk_h,
- .enable = s3c2410_clkcon_enable,
- .ctrlbit = S3C2410_CLKCON_NAND,
- }, {
- .name = "sdi",
- .id = -1,
- .parent = &clk_p,
- .enable = s3c2410_clkcon_enable,
- .ctrlbit = S3C2410_CLKCON_SDI,
- }, {
- .name = "adc",
- .id = -1,
- .parent = &clk_p,
- .enable = s3c2410_clkcon_enable,
- .ctrlbit = S3C2410_CLKCON_ADC,
- }, {
- .name = "i2c",
- .id = -1,
- .parent = &clk_p,
- .enable = s3c2410_clkcon_enable,
- .ctrlbit = S3C2410_CLKCON_IIC,
- }, {
- .name = "iis",
- .id = -1,
- .parent = &clk_p,
- .enable = s3c2410_clkcon_enable,
- .ctrlbit = S3C2410_CLKCON_IIS,
- }, {
- .name = "spi",
- .id = -1,
- .parent = &clk_p,
- .enable = s3c2410_clkcon_enable,
- .ctrlbit = S3C2410_CLKCON_SPI,
- }
-};
-
-static struct clk init_clocks[] = {
- {
- .name = "lcd",
- .id = -1,
- .parent = &clk_h,
- .enable = s3c2410_clkcon_enable,
- .ctrlbit = S3C2410_CLKCON_LCDC,
- }, {
- .name = "gpio",
- .id = -1,
- .parent = &clk_p,
- .enable = s3c2410_clkcon_enable,
- .ctrlbit = S3C2410_CLKCON_GPIO,
- }, {
- .name = "usb-host",
- .id = -1,
- .parent = &clk_h,
- .enable = s3c2410_clkcon_enable,
- .ctrlbit = S3C2410_CLKCON_USBH,
- }, {
- .name = "usb-device",
- .id = -1,
- .parent = &clk_h,
- .enable = s3c2410_clkcon_enable,
- .ctrlbit = S3C2410_CLKCON_USBD,
- }, {
- .name = "timers",
- .id = -1,
- .parent = &clk_p,
- .enable = s3c2410_clkcon_enable,
- .ctrlbit = S3C2410_CLKCON_PWMT,
- }, {
- .name = "uart",
- .id = 0,
- .parent = &clk_p,
- .enable = s3c2410_clkcon_enable,
- .ctrlbit = S3C2410_CLKCON_UART0,
- }, {
- .name = "uart",
- .id = 1,
- .parent = &clk_p,
- .enable = s3c2410_clkcon_enable,
- .ctrlbit = S3C2410_CLKCON_UART1,
- }, {
- .name = "uart",
- .id = 2,
- .parent = &clk_p,
- .enable = s3c2410_clkcon_enable,
- .ctrlbit = S3C2410_CLKCON_UART2,
- }, {
- .name = "rtc",
- .id = -1,
- .parent = &clk_p,
- .enable = s3c2410_clkcon_enable,
- .ctrlbit = S3C2410_CLKCON_RTC,
- }, {
- .name = "watchdog",
- .id = -1,
- .parent = &clk_p,
- .ctrlbit = 0,
- }, {
- .name = "usb-bus-host",
- .id = -1,
- .parent = &clk_usb_bus,
- }, {
- .name = "usb-bus-gadget",
- .id = -1,
- .parent = &clk_usb_bus,
- },
-};
-
-/* s3c2410_baseclk_add()
- *
- * Add all the clocks used by the s3c2410 or compatible CPUs
- * such as the S3C2440 and S3C2442.
- *
- * We cannot use a system device as we are needed before any
- * of the init-calls that initialise the devices are actually
- * done.
-*/
-
-int __init s3c2410_baseclk_add(void)
-{
- unsigned long clkslow = __raw_readl(S3C2410_CLKSLOW);
- unsigned long clkcon = __raw_readl(S3C2410_CLKCON);
- struct clk *clkp;
- struct clk *xtal;
- int ret;
- int ptr;
-
- clk_upll.enable = s3c2410_upll_enable;
-
- if (s3c24xx_register_clock(&clk_usb_bus) < 0)
- printk(KERN_ERR "failed to register usb bus clock\n");
-
- /* register clocks from clock array */
-
- clkp = init_clocks;
- for (ptr = 0; ptr < ARRAY_SIZE(init_clocks); ptr++, clkp++) {
- /* ensure that we note the clock state */
-
- clkp->usage = clkcon & clkp->ctrlbit ? 1 : 0;
-
- ret = s3c24xx_register_clock(clkp);
- if (ret < 0) {
- printk(KERN_ERR "Failed to register clock %s (%d)\n",
- clkp->name, ret);
- }
- }
-
- /* We must be careful disabling the clocks we are not intending to
- * be using at boot time, as subsytems such as the LCD which do
- * their own DMA requests to the bus can cause the system to lockup
- * if they where in the middle of requesting bus access.
- *
- * Disabling the LCD clock if the LCD is active is very dangerous,
- * and therefore the bootloader should be careful to not enable
- * the LCD clock if it is not needed.
- */
-
- /* install (and disable) the clocks we do not need immediately */
-
- clkp = init_clocks_disable;
- for (ptr = 0; ptr < ARRAY_SIZE(init_clocks_disable); ptr++, clkp++) {
-
- ret = s3c24xx_register_clock(clkp);
- if (ret < 0) {
- printk(KERN_ERR "Failed to register clock %s (%d)\n",
- clkp->name, ret);
- }
-
- s3c2410_clkcon_enable(clkp, 0);
- }
-
- /* show the clock-slow value */
-
- xtal = clk_get(NULL, "xtal");
-
- printk("CLOCK: Slow mode (%ld.%ld MHz), %s, MPLL %s, UPLL %s\n",
- print_mhz(clk_get_rate(xtal) /
- ( 2 * S3C2410_CLKSLOW_GET_SLOWVAL(clkslow))),
- (clkslow & S3C2410_CLKSLOW_SLOW) ? "slow" : "fast",
- (clkslow & S3C2410_CLKSLOW_MPLL_OFF) ? "off" : "on",
- (clkslow & S3C2410_CLKSLOW_UCLK_OFF) ? "off" : "on");
-
- return 0;
-}
+++ /dev/null
-/* linux/arch/arm/mach-s3c2410/s3c2410-dma.c
- *
- * Copyright (c) 2006 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2410 DMA selection
- *
- * http://armlinux.simtec.co.uk/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/sysdev.h>
-#include <linux/serial_core.h>
-
-#include <asm/dma.h>
-#include <asm/arch/dma.h>
-#include "dma.h"
-
-#include "cpu.h"
-
-#include <asm/arch/regs-serial.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/regs-ac97.h>
-#include <asm/arch/regs-mem.h>
-#include <asm/arch/regs-lcd.h>
-#include <asm/arch/regs-sdi.h>
-#include <asm/arch/regs-iis.h>
-#include <asm/arch/regs-spi.h>
-
-static struct s3c24xx_dma_map __initdata s3c2410_dma_mappings[] = {
- [DMACH_XD0] = {
- .name = "xdreq0",
- .channels[0] = S3C2410_DCON_CH0_XDREQ0 | DMA_CH_VALID,
- },
- [DMACH_XD1] = {
- .name = "xdreq1",
- .channels[1] = S3C2410_DCON_CH1_XDREQ1 | DMA_CH_VALID,
- },
- [DMACH_SDI] = {
- .name = "sdi",
- .channels[0] = S3C2410_DCON_CH0_SDI | DMA_CH_VALID,
- .channels[2] = S3C2410_DCON_CH2_SDI | DMA_CH_VALID,
- .channels[3] = S3C2410_DCON_CH3_SDI | DMA_CH_VALID,
- .hw_addr.to = S3C2410_PA_IIS + S3C2410_IISFIFO,
- .hw_addr.from = S3C2410_PA_IIS + S3C2410_IISFIFO,
- },
- [DMACH_SPI0] = {
- .name = "spi0",
- .channels[1] = S3C2410_DCON_CH1_SPI | DMA_CH_VALID,
- .hw_addr.to = S3C2410_PA_SPI + S3C2410_SPTDAT,
- .hw_addr.from = S3C2410_PA_SPI + S3C2410_SPRDAT,
- },
- [DMACH_SPI1] = {
- .name = "spi1",
- .channels[3] = S3C2410_DCON_CH3_SPI | DMA_CH_VALID,
- .hw_addr.to = S3C2410_PA_SPI + 0x20 + S3C2410_SPTDAT,
- .hw_addr.from = S3C2410_PA_SPI + 0x20 + S3C2410_SPRDAT,
- },
- [DMACH_UART0] = {
- .name = "uart0",
- .channels[0] = S3C2410_DCON_CH0_UART0 | DMA_CH_VALID,
- .hw_addr.to = S3C2410_PA_UART0 + S3C2410_UTXH,
- .hw_addr.from = S3C2410_PA_UART0 + S3C2410_URXH,
- },
- [DMACH_UART1] = {
- .name = "uart1",
- .channels[1] = S3C2410_DCON_CH1_UART1 | DMA_CH_VALID,
- .hw_addr.to = S3C2410_PA_UART1 + S3C2410_UTXH,
- .hw_addr.from = S3C2410_PA_UART1 + S3C2410_URXH,
- },
- [DMACH_UART2] = {
- .name = "uart2",
- .channels[3] = S3C2410_DCON_CH3_UART2 | DMA_CH_VALID,
- .hw_addr.to = S3C2410_PA_UART2 + S3C2410_UTXH,
- .hw_addr.from = S3C2410_PA_UART2 + S3C2410_URXH,
- },
- [DMACH_TIMER] = {
- .name = "timer",
- .channels[0] = S3C2410_DCON_CH0_TIMER | DMA_CH_VALID,
- .channels[2] = S3C2410_DCON_CH2_TIMER | DMA_CH_VALID,
- .channels[3] = S3C2410_DCON_CH3_TIMER | DMA_CH_VALID,
- },
- [DMACH_I2S_IN] = {
- .name = "i2s-sdi",
- .channels[1] = S3C2410_DCON_CH1_I2SSDI | DMA_CH_VALID,
- .channels[2] = S3C2410_DCON_CH2_I2SSDI | DMA_CH_VALID,
- .hw_addr.from = S3C2410_PA_IIS + S3C2410_IISFIFO,
- },
- [DMACH_I2S_OUT] = {
- .name = "i2s-sdo",
- .channels[2] = S3C2410_DCON_CH2_I2SSDO | DMA_CH_VALID,
- .hw_addr.to = S3C2410_PA_IIS + S3C2410_IISFIFO,
- },
- [DMACH_USB_EP1] = {
- .name = "usb-ep1",
- .channels[0] = S3C2410_DCON_CH0_USBEP1 | DMA_CH_VALID,
- },
- [DMACH_USB_EP2] = {
- .name = "usb-ep2",
- .channels[1] = S3C2410_DCON_CH1_USBEP2 | DMA_CH_VALID,
- },
- [DMACH_USB_EP3] = {
- .name = "usb-ep3",
- .channels[2] = S3C2410_DCON_CH2_USBEP3 | DMA_CH_VALID,
- },
- [DMACH_USB_EP4] = {
- .name = "usb-ep4",
- .channels[3] =S3C2410_DCON_CH3_USBEP4 | DMA_CH_VALID,
- },
-};
-
-static void s3c2410_dma_select(struct s3c2410_dma_chan *chan,
- struct s3c24xx_dma_map *map)
-{
- chan->dcon = map->channels[chan->number] & ~DMA_CH_VALID;
-}
-
-static struct s3c24xx_dma_selection __initdata s3c2410_dma_sel = {
- .select = s3c2410_dma_select,
- .dcon_mask = 7 << 24,
- .map = s3c2410_dma_mappings,
- .map_size = ARRAY_SIZE(s3c2410_dma_mappings),
-};
-
-static int s3c2410_dma_add(struct sys_device *sysdev)
-{
- return s3c24xx_dma_init_map(&s3c2410_dma_sel);
-}
-
-#if defined(CONFIG_CPU_S3C2410)
-static struct sysdev_driver s3c2410_dma_driver = {
- .add = s3c2410_dma_add,
-};
-
-static int __init s3c2410_dma_init(void)
-{
- return sysdev_driver_register(&s3c2410_sysclass, &s3c2410_dma_driver);
-}
-
-arch_initcall(s3c2410_dma_init);
-#endif
-
-#if defined(CONFIG_CPU_S3C2442)
-/* S3C2442 DMA contains the same selection table as the S3C2410 */
-static struct sysdev_driver s3c2442_dma_driver = {
- .add = s3c2410_dma_add,
-};
-
-static int __init s3c2442_dma_init(void)
-{
- return sysdev_driver_register(&s3c2442_sysclass, &s3c2442_dma_driver);
-}
-
-arch_initcall(s3c2442_dma_init);
-#endif
-
+++ /dev/null
-/* linux/arch/arm/mach-s3c2410/s3c2410-gpio.c
- *
- * Copyright (c) 2004-2006 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2410 GPIO support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-
-#include <asm/hardware.h>
-#include <asm/irq.h>
-#include <asm/io.h>
-
-#include <asm/arch/regs-gpio.h>
-
-int s3c2410_gpio_irqfilter(unsigned int pin, unsigned int on,
- unsigned int config)
-{
- void __iomem *reg = S3C24XX_EINFLT0;
- unsigned long flags;
- unsigned long val;
-
- if (pin < S3C2410_GPG8 || pin > S3C2410_GPG15)
- return -1;
-
- config &= 0xff;
-
- pin -= S3C2410_GPG8;
- reg += pin & ~3;
-
- local_irq_save(flags);
-
- /* update filter width and clock source */
-
- val = __raw_readl(reg);
- val &= ~(0xff << ((pin & 3) * 8));
- val |= config << ((pin & 3) * 8);
- __raw_writel(val, reg);
-
- /* update filter enable */
-
- val = __raw_readl(S3C24XX_EXTINT2);
- val &= ~(1 << ((pin * 4) + 3));
- val |= on << ((pin * 4) + 3);
- __raw_writel(val, S3C24XX_EXTINT2);
-
- local_irq_restore(flags);
-
- return 0;
-}
-
-EXPORT_SYMBOL(s3c2410_gpio_irqfilter);
+++ /dev/null
-/* linux/arch/arm/mach-s3c2410/s3c2410-irq.c
- *
- * Copyright (c) 2006 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/ptrace.h>
-#include <linux/sysdev.h>
-
-#include "cpu.h"
-#include "pm.h"
-
-static int s3c2410_irq_add(struct sys_device *sysdev)
-{
- return 0;
-}
-
-static struct sysdev_driver s3c2410_irq_driver = {
- .add = s3c2410_irq_add,
- .suspend = s3c24xx_irq_suspend,
- .resume = s3c24xx_irq_resume,
-};
-
-static int s3c2410_irq_init(void)
-{
- return sysdev_driver_register(&s3c2410_sysclass, &s3c2410_irq_driver);
-}
-
-arch_initcall(s3c2410_irq_init);
+++ /dev/null
-/* linux/arch/arm/mach-s3c2410/s3c2410-pm.c
- *
- * Copyright (c) 2006 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2410 (and compatible) Power Manager (Suspend-To-RAM) support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-*/
-
-#include <linux/init.h>
-#include <linux/suspend.h>
-#include <linux/errno.h>
-#include <linux/time.h>
-#include <linux/sysdev.h>
-
-#include <asm/hardware.h>
-#include <asm/io.h>
-
-#include <asm/mach-types.h>
-
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/h1940.h>
-
-#include "cpu.h"
-#include "pm.h"
-
-#ifdef CONFIG_S3C2410_PM_DEBUG
-extern void pm_dbg(const char *fmt, ...);
-#define DBG(fmt...) pm_dbg(fmt)
-#else
-#define DBG(fmt...) printk(KERN_DEBUG fmt)
-#endif
-
-static void s3c2410_pm_prepare(void)
-{
- /* ensure at least GSTATUS3 has the resume address */
-
- __raw_writel(virt_to_phys(s3c2410_cpu_resume), S3C2410_GSTATUS3);
-
- DBG("GSTATUS3 0x%08x\n", __raw_readl(S3C2410_GSTATUS3));
- DBG("GSTATUS4 0x%08x\n", __raw_readl(S3C2410_GSTATUS4));
-
- if (machine_is_h1940()) {
- void *base = phys_to_virt(H1940_SUSPEND_CHECK);
- unsigned long ptr;
- unsigned long calc = 0;
-
- /* generate check for the bootloader to check on resume */
-
- for (ptr = 0; ptr < 0x40000; ptr += 0x400)
- calc += __raw_readl(base+ptr);
-
- __raw_writel(calc, phys_to_virt(H1940_SUSPEND_CHECKSUM));
- }
-
- /* the RX3715 uses similar code and the same H1940 and the
- * same offsets for resume and checksum pointers */
-
- if (machine_is_rx3715()) {
- void *base = phys_to_virt(H1940_SUSPEND_CHECK);
- unsigned long ptr;
- unsigned long calc = 0;
-
- /* generate check for the bootloader to check on resume */
-
- for (ptr = 0; ptr < 0x40000; ptr += 0x4)
- calc += __raw_readl(base+ptr);
-
- __raw_writel(calc, phys_to_virt(H1940_SUSPEND_CHECKSUM));
- }
-
- if ( machine_is_aml_m5900() )
- s3c2410_gpio_setpin(S3C2410_GPF2, 1);
-
-}
-
-static int s3c2410_pm_resume(struct sys_device *dev)
-{
- unsigned long tmp;
-
- /* unset the return-from-sleep flag, to ensure reset */
-
- tmp = __raw_readl(S3C2410_GSTATUS2);
- tmp &= S3C2410_GSTATUS2_OFFRESET;
- __raw_writel(tmp, S3C2410_GSTATUS2);
-
- if ( machine_is_aml_m5900() )
- s3c2410_gpio_setpin(S3C2410_GPF2, 0);
-
- return 0;
-}
-
-static int s3c2410_pm_add(struct sys_device *dev)
-{
- pm_cpu_prep = s3c2410_pm_prepare;
- pm_cpu_sleep = s3c2410_cpu_suspend;
-
- return 0;
-}
-
-#if defined(CONFIG_CPU_S3C2410)
-static struct sysdev_driver s3c2410_pm_driver = {
- .add = s3c2410_pm_add,
- .resume = s3c2410_pm_resume,
-};
-
-/* register ourselves */
-
-static int __init s3c2410_pm_drvinit(void)
-{
- return sysdev_driver_register(&s3c2410_sysclass, &s3c2410_pm_driver);
-}
-
-arch_initcall(s3c2410_pm_drvinit);
-#endif
-
-#if defined(CONFIG_CPU_S3C2440)
-static struct sysdev_driver s3c2440_pm_driver = {
- .add = s3c2410_pm_add,
- .resume = s3c2410_pm_resume,
-};
-
-static int __init s3c2440_pm_drvinit(void)
-{
- return sysdev_driver_register(&s3c2440_sysclass, &s3c2440_pm_driver);
-}
-
-arch_initcall(s3c2440_pm_drvinit);
-#endif
-
-#if defined(CONFIG_CPU_S3C2442)
-static struct sysdev_driver s3c2442_pm_driver = {
- .add = s3c2410_pm_add,
- .resume = s3c2410_pm_resume,
-};
-
-static int __init s3c2442_pm_drvinit(void)
-{
- return sysdev_driver_register(&s3c2442_sysclass, &s3c2442_pm_driver);
-}
-
-arch_initcall(s3c2442_pm_drvinit);
-#endif
+++ /dev/null
-/* linux/arch/arm/mach-s3c2410/s3c2410-sleep.S
- *
- * Copyright (c) 2004 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2410 Power Manager (Suspend-To-RAM) support
- *
- * Based on PXA/SA1100 sleep code by:
- * Nicolas Pitre, (c) 2002 Monta Vista Software Inc
- * Cliff Brake, (c) 2001
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-*/
-
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-#include <asm/hardware.h>
-#include <asm/arch/map.h>
-
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/regs-clock.h>
-#include <asm/arch/regs-mem.h>
-#include <asm/arch/regs-serial.h>
-
- /* s3c2410_cpu_suspend
- *
- * put the cpu into sleep mode
- */
-
-ENTRY(s3c2410_cpu_suspend)
- @@ prepare cpu to sleep
-
- ldr r4, =S3C2410_REFRESH
- ldr r5, =S3C24XX_MISCCR
- ldr r6, =S3C2410_CLKCON
- ldr r7, [ r4 ] @ get REFRESH (and ensure in TLB)
- ldr r8, [ r5 ] @ get MISCCR (and ensure in TLB)
- ldr r9, [ r6 ] @ get CLKCON (and ensure in TLB)
-
- orr r7, r7, #S3C2410_REFRESH_SELF @ SDRAM sleep command
- orr r8, r8, #S3C2410_MISCCR_SDSLEEP @ SDRAM power-down signals
- orr r9, r9, #S3C2410_CLKCON_POWER @ power down command
-
- teq pc, #0 @ first as a trial-run to load cache
- bl s3c2410_do_sleep
- teq r0, r0 @ now do it for real
- b s3c2410_do_sleep @
-
- @@ align next bit of code to cache line
- .align 8
-s3c2410_do_sleep:
- streq r7, [ r4 ] @ SDRAM sleep command
- streq r8, [ r5 ] @ SDRAM power-down config
- streq r9, [ r6 ] @ CPU sleep
-1: beq 1b
- mov pc, r14
#include <asm/arch/regs-clock.h>
#include <asm/arch/regs-serial.h>
-#include "s3c2410.h"
-#include "cpu.h"
-#include "devs.h"
-#include "clock.h"
+#include <asm/plat-s3c24xx/s3c2410.h>
+#include <asm/plat-s3c24xx/cpu.h>
+#include <asm/plat-s3c24xx/devs.h>
+#include <asm/plat-s3c24xx/clock.h>
/* Initial IO mappings */
/* need to register class before we actually register the device, and
* we also need to ensure that it has been initialised before any of the
- * drivers even try to use it (even if not on an s3c2440 based system)
+ * drivers even try to use it (even if not on an s3c2410 based system)
* as a driver which may support both 2410 and 2440 may try and use it.
*/
-/* linux/arch/arm/mach-s3c2410/sleep.S
+/* linux/arch/arm/mach-s3c2410/s3c2410-sleep.S
*
* Copyright (c) 2004 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
#include <asm/arch/regs-mem.h>
#include <asm/arch/regs-serial.h>
-/* CONFIG_DEBUG_RESUME is dangerous if your bootloader does not
- * reset the UART configuration, only enable if you really need this!
-*/
-//#define CONFIG_DEBUG_RESUME
-
- .text
-
- /* s3c2410_cpu_save
- *
- * save enough of the CPU state to allow us to re-start
- * pm.c code. as we store items like the sp/lr, we will
- * end up returning from this function when the cpu resumes
- * so the return value is set to mark this.
- *
- * This arangement means we avoid having to flush the cache
- * from this code.
- *
- * entry:
- * r0 = pointer to save block
- *
- * exit:
- * r0 = 0 => we stored everything
- * 1 => resumed from sleep
- */
-
-ENTRY(s3c2410_cpu_save)
- stmfd sp!, { r4 - r12, lr }
-
- @@ store co-processor registers
-
- mrc p15, 0, r4, c15, c1, 0 @ CP access register
- mrc p15, 0, r5, c13, c0, 0 @ PID
- mrc p15, 0, r6, c3, c0, 0 @ Domain ID
- mrc p15, 0, r7, c2, c0, 0 @ translation table base address
- mrc p15, 0, r8, c1, c0, 0 @ control register
-
- stmia r0, { r4 - r13 }
-
- mov r0, #0
- ldmfd sp, { r4 - r12, pc }
-
- @@ return to the caller, after having the MMU
- @@ turned on, this restores the last bits from the
- @@ stack
-resume_with_mmu:
- mov r0, #1
- ldmfd sp!, { r4 - r12, pc }
-
- .ltorg
-
- @@ the next bits sit in the .data segment, even though they
- @@ happen to be code... the s3c2410_sleep_save_phys needs to be
- @@ accessed by the resume code before it can restore the MMU.
- @@ This means that the variable has to be close enough for the
- @@ code to read it... since the .text segment needs to be RO,
- @@ the data segment can be the only place to put this code.
-
- .data
-
- .global s3c2410_sleep_save_phys
-s3c2410_sleep_save_phys:
- .word 0
-
- /* s3c2410_cpu_resume
+ /* s3c2410_cpu_suspend
*
- * resume code entry for bootloader to call
- *
- * we must put this code here in the data segment as we have no
- * other way of restoring the stack pointer after sleep, and we
- * must not write to the code segment (code is read-only)
+ * put the cpu into sleep mode
*/
-ENTRY(s3c2410_cpu_resume)
- mov r0, #PSR_I_BIT | PSR_F_BIT | SVC_MODE
- msr cpsr_c, r0
-
- @@ load UART to allow us to print the two characters for
- @@ resume debug
-
- mov r2, #S3C24XX_PA_UART & 0xff000000
- orr r2, r2, #S3C24XX_PA_UART & 0xff000
-
-#if 0
- /* SMDK2440 LED set */
- mov r14, #S3C24XX_PA_GPIO
- ldr r12, [ r14, #0x54 ]
- bic r12, r12, #3<<4
- orr r12, r12, #1<<7
- str r12, [ r14, #0x54 ]
-#endif
-
-#ifdef CONFIG_DEBUG_RESUME
- mov r3, #'L'
- strb r3, [ r2, #S3C2410_UTXH ]
-1001:
- ldrb r14, [ r3, #S3C2410_UTRSTAT ]
- tst r14, #S3C2410_UTRSTAT_TXE
- beq 1001b
-#endif /* CONFIG_DEBUG_RESUME */
-
- mov r1, #0
- mcr p15, 0, r1, c8, c7, 0 @@ invalidate I & D TLBs
- mcr p15, 0, r1, c7, c7, 0 @@ invalidate I & D caches
-
- ldr r0, s3c2410_sleep_save_phys @ address of restore block
- ldmia r0, { r4 - r13 }
-
- mcr p15, 0, r4, c15, c1, 0 @ CP access register
- mcr p15, 0, r5, c13, c0, 0 @ PID
- mcr p15, 0, r6, c3, c0, 0 @ Domain ID
- mcr p15, 0, r7, c2, c0, 0 @ translation table base
-
-#ifdef CONFIG_DEBUG_RESUME
- mov r3, #'R'
- strb r3, [ r2, #S3C2410_UTXH ]
-#endif
-
- ldr r2, =resume_with_mmu
- mcr p15, 0, r8, c1, c0, 0 @ turn on MMU, etc
- nop @ second-to-last before mmu
- mov pc, r2 @ go back to virtual address
-
- .ltorg
+ENTRY(s3c2410_cpu_suspend)
+ @@ prepare cpu to sleep
+
+ ldr r4, =S3C2410_REFRESH
+ ldr r5, =S3C24XX_MISCCR
+ ldr r6, =S3C2410_CLKCON
+ ldr r7, [ r4 ] @ get REFRESH (and ensure in TLB)
+ ldr r8, [ r5 ] @ get MISCCR (and ensure in TLB)
+ ldr r9, [ r6 ] @ get CLKCON (and ensure in TLB)
+
+ orr r7, r7, #S3C2410_REFRESH_SELF @ SDRAM sleep command
+ orr r8, r8, #S3C2410_MISCCR_SDSLEEP @ SDRAM power-down signals
+ orr r9, r9, #S3C2410_CLKCON_POWER @ power down command
+
+ teq pc, #0 @ first as a trial-run to load cache
+ bl s3c2410_do_sleep
+ teq r0, r0 @ now do it for real
+ b s3c2410_do_sleep @
+
+ @@ align next bit of code to cache line
+ .align 5
+s3c2410_do_sleep:
+ streq r7, [ r4 ] @ SDRAM sleep command
+ streq r8, [ r5 ] @ SDRAM power-down config
+ streq r9, [ r6 ] @ CPU sleep
+1: beq 1b
+ mov pc, r14
#include <asm/io.h>
#include <asm/irq.h>
-#include "devs.h"
+#include <asm/plat-s3c24xx/devs.h>
#include "usb-simtec.h"
/* control power and monitor over-current events on various Simtec
--- /dev/null
+# arch/arm/mach-s3c2412/Kconfig
+#
+# Copyright 2007 Simtec Electronics
+#
+# Licensed under GPLv2
+
+config CPU_S3C2412
+ bool
+ depends on ARCH_S3C2410
+ select S3C2412_PM if PM
+ select S3C2412_DMA if S3C2410_DMA
+ help
+ Support for the S3C2412 and S3C2413 SoCs from the S3C24XX line
+
+config CPU_S3C2412_ONLY
+ bool
+ depends on ARCH_S3C2410 && !CPU_S3C2400 && !CPU_S3C2410 && \
+ !CPU_S3C2440 && !CPU_S3C2442 && !CPU_S3C2443 && CPU_S3C2412
+ default y if CPU_S3C2412
+
+config S3C2412_DMA
+ bool
+ depends on CPU_S3C2412
+ help
+ Internal config node for S3C2412 DMA support
+
+config S3C2412_PM
+ bool
+ help
+ Internal config node to apply S3C2412 power management
+
+
+menu "S3C2412 Machines"
+
+config MACH_SMDK2413
+ bool "SMDK2413"
+ select CPU_S3C2412
+ select MACH_S3C2413
+ select MACH_SMDK
+ help
+ Say Y here if you are using an SMDK2413
+
+config MACH_S3C2413
+ bool
+ help
+ Internal node for S3C2413 version of SMDK2413, so that
+ machine_is_s3c2413() will work when MACH_SMDK2413 is
+ selected
+
+config MACH_VSTMS
+ bool "VMSTMS"
+ select CPU_S3C2412
+ help
+ Say Y here if you are using an VSTMS board
+
+
+endmenu
+
--- /dev/null
+# arch/arm/mach-s3c2412/Makefile
+#
+# Copyright 2007 Simtec Electronics
+#
+# Licensed under GPLv2
+
+obj-y :=
+obj-m :=
+obj-n :=
+obj- :=
+
+obj-$(CONFIG_CPU_S3C2412) += s3c2412.o
+obj-$(CONFIG_CPU_S3C2412) += irq.o
+obj-$(CONFIG_CPU_S3C2412) += clock.o
+obj-$(CONFIG_S3C2412_DMA) += dma.o
+obj-$(CONFIG_S3C2412_PM) += pm.o
+
+# Machine support
+
+obj-$(CONFIG_MACH_SMDK2413) += mach-smdk2413.o
+obj-$(CONFIG_MACH_VSTMS) += mach-vstms.o
-/* linux/arch/arm/mach-s3c2410/s3c2412-clock.c
+/* linux/arch/arm/mach-s3c2412/clock.c
*
* Copyright (c) 2006 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
#include <asm/arch/regs-clock.h>
#include <asm/arch/regs-gpio.h>
-#include "s3c2412.h"
-#include "clock.h"
-#include "cpu.h"
+#include <asm/plat-s3c24xx/s3c2412.h>
+#include <asm/plat-s3c24xx/clock.h>
+#include <asm/plat-s3c24xx/cpu.h>
/* We currently have to assume that the system is running
* from the XTPll input, and that all ***REFCLKs are being
-/* linux/arch/arm/mach-s3c2410/s3c2412-dma.c
+/* linux/arch/arm/mach-s3c2412/dma.c
*
* Copyright (c) 2006 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
#include <asm/arch/dma.h>
#include <asm/io.h>
-#include "dma.h"
-#include "cpu.h"
+#include <asm/plat-s3c24xx/dma.h>
+#include <asm/plat-s3c24xx/cpu.h>
#include <asm/arch/regs-serial.h>
#include <asm/arch/regs-gpio.h>
static int s3c2412_dma_add(struct sys_device *sysdev)
{
+ s3c2410_dma_init();
return s3c24xx_dma_init_map(&s3c2412_dma_sel);
}
-/* linux/arch/arm/mach-s3c2412/s3c2412-irq.c
+/* linux/arch/arm/mach-s3c2412/irq.c
*
* Copyright (c) 2006 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
#include <asm/arch/regs-irq.h>
#include <asm/arch/regs-gpio.h>
-#include "cpu.h"
-#include "irq.h"
-#include "pm.h"
+#include <asm/plat-s3c24xx/cpu.h>
+#include <asm/plat-s3c24xx/irq.h>
+#include <asm/plat-s3c24xx/pm.h>
/* the s3c2412 changes the behaviour of IRQ_EINT0 through IRQ_EINT3 by
* having them turn up in both the INT* and the EINT* registers. Whilst
-/* linux/arch/arm/mach-s3c2410/mach-smdk2413.c
+/* linux/arch/arm/mach-s3c2412/mach-smdk2413.c
*
* Copyright (c) 2006 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
#include <asm/arch/regs-lcd.h>
#include <asm/arch/idle.h>
+#include <asm/arch/udc.h>
#include <asm/arch/fb.h>
-#include "s3c2410.h"
-#include "s3c2412.h"
-#include "clock.h"
-#include "devs.h"
-#include "cpu.h"
+#include <asm/plat-s3c24xx/s3c2410.h>
+#include <asm/plat-s3c24xx/s3c2412.h>
+#include <asm/plat-s3c24xx/clock.h>
+#include <asm/plat-s3c24xx/devs.h>
+#include <asm/plat-s3c24xx/cpu.h>
-#include "common-smdk.h"
+#include <asm/plat-s3c24xx/common-smdk.h>
static struct map_desc smdk2413_iodesc[] __initdata = {
};
}
};
+static void smdk2413_udc_pullup(enum s3c2410_udc_cmd_e cmd)
+{
+ printk(KERN_DEBUG "udc: pullup(%d)\n",cmd);
+
+ switch (cmd)
+ {
+ case S3C2410_UDC_P_ENABLE :
+ s3c2410_gpio_setpin(S3C2410_GPF2, 1);
+ break;
+ case S3C2410_UDC_P_DISABLE :
+ s3c2410_gpio_setpin(S3C2410_GPF2, 0);
+ break;
+ case S3C2410_UDC_P_RESET :
+ break;
+ default:
+ break;
+ }
+}
+
+
+static struct s3c2410_udc_mach_info smdk2413_udc_cfg __initdata = {
+ .udc_command = smdk2413_udc_pullup,
+};
+
+
static struct platform_device *smdk2413_devices[] __initdata = {
&s3c_device_usb,
//&s3c_device_lcd,
&s3c_device_wdt,
&s3c_device_i2c,
&s3c_device_iis,
+ &s3c_device_usbgadget,
};
static struct s3c24xx_board smdk2413_board __initdata = {
}
static void __init smdk2413_machine_init(void)
-{
+{ /* Turn off suspend on both USB ports, and switch the
+ * selectable USB port to USB device mode. */
+
+ s3c2410_gpio_setpin(S3C2410_GPF2, 0);
+ s3c2410_gpio_cfgpin(S3C2410_GPF2, S3C2410_GPIO_OUTPUT);
+
+ s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST |
+ S3C2410_MISCCR_USBSUSPND0 |
+ S3C2410_MISCCR_USBSUSPND1, 0x0);
+
+
+ s3c24xx_udc_set_platdata(&smdk2413_udc_cfg);
+
smdk_machine_init();
}
.timer = &s3c24xx_timer,
MACHINE_END
+MACHINE_START(SMDK2412, "SMDK2412")
+ /* Maintainer: Ben Dooks <ben@fluff.org> */
+ .phys_io = S3C2410_PA_UART,
+ .io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
+ .boot_params = S3C2410_SDRAM_PA + 0x100,
+
+ .fixup = smdk2413_fixup,
+ .init_irq = s3c24xx_init_irq,
+ .map_io = smdk2413_map_io,
+ .init_machine = smdk2413_machine_init,
+ .timer = &s3c24xx_timer,
+MACHINE_END
+
MACHINE_START(SMDK2413, "SMDK2413")
/* Maintainer: Ben Dooks <ben@fluff.org> */
.phys_io = S3C2410_PA_UART,
-/* linux/arch/arm/mach-s3c2410/mach-vstms.c
+/* linux/arch/arm/mach-s3c2412/mach-vstms.c
*
* (C) 2006 Thomas Gleixner <tglx@linutronix.de>
*
#include <asm/mach/irq.h>
#include <asm/hardware.h>
-#include <asm/hardware/iomd.h>
#include <asm/setup.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/arch/nand.h>
-#include "s3c2410.h"
-#include "s3c2412.h"
-#include "clock.h"
-#include "devs.h"
-#include "cpu.h"
+#include <asm/plat-s3c24xx/s3c2410.h>
+#include <asm/plat-s3c24xx/s3c2412.h>
+#include <asm/plat-s3c24xx/clock.h>
+#include <asm/plat-s3c24xx/devs.h>
+#include <asm/plat-s3c24xx/cpu.h>
static struct map_desc vstms_iodesc[] __initdata = {
-/* linux/arch/arm/mach-s3c2410/s3c2412-pm.c
+/* linux/arch/arm/mach-s3c2412/pm.c
*
* Copyright (c) 2006 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
#include <asm/arch/regs-gpio.h>
#include <asm/arch/regs-dsc.h>
-#include "cpu.h"
-#include "pm.h"
+#include <asm/plat-s3c24xx/cpu.h>
+#include <asm/plat-s3c24xx/pm.h>
-#include "s3c2412.h"
+#include <asm/plat-s3c24xx/s3c2412.h>
static void s3c2412_cpu_suspend(void)
{
-/* linux/arch/arm/mach-s3c2410/s3c2412.c
+/* linux/arch/arm/mach-s3c2412/s3c2412.c
*
* Copyright (c) 2006 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
#include <asm/arch/regs-gpioj.h>
#include <asm/arch/regs-dsc.h>
-#include "s3c2412.h"
-#include "cpu.h"
-#include "devs.h"
-#include "clock.h"
-#include "pm.h"
+#include <asm/plat-s3c24xx/s3c2412.h>
+#include <asm/plat-s3c24xx/cpu.h>
+#include <asm/plat-s3c24xx/devs.h>
+#include <asm/plat-s3c24xx/clock.h>
+#include <asm/plat-s3c24xx/pm.h>
#ifndef CONFIG_CPU_S3C2412_ONLY
void __iomem *s3c24xx_va_gpio2 = S3C24XX_VA_GPIO;
--- /dev/null
+# arch/arm/mach-s3c2440/Kconfig
+#
+# Copyright 2007 Simtec Electronics
+#
+# Licensed under GPLv2
+
+config CPU_S3C2440
+ bool
+ depends on ARCH_S3C2410
+ select S3C2410_CLOCK
+ select S3C2410_PM if PM
+ select S3C2410_GPIO
+ select S3C2440_DMA if S3C2410_DMA
+ select CPU_S3C244X
+ help
+ Support for S3C2440 Samsung Mobile CPU based systems.
+
+config S3C2440_DMA
+ bool
+ depends on ARCH_S3C2410 && CPU_S3C24405B
+ help
+ Support for S3C2440 specific DMA code5A
+
+
+menu "S3C2440 Machines"
+
+config MACH_ANUBIS
+ bool "Simtec Electronics ANUBIS"
+ select CPU_S3C2440
+ select PM_SIMTEC if PM
+ help
+ Say Y here if you are using the Simtec Electronics ANUBIS
+ development system
+
+config MACH_OSIRIS
+ bool "Simtec IM2440D20 (OSIRIS) module"
+ select CPU_S3C2440
+ select PM_SIMTEC if PM
+ help
+ Say Y here if you are using the Simtec IM2440D20 module, also
+ known as the Osiris.
+
+config MACH_RX3715
+ bool "HP iPAQ rx3715"
+ select CPU_S3C2440
+ select PM_H1940 if PM
+ help
+ Say Y here if you are using the HP iPAQ rx3715.
+
+config ARCH_S3C2440
+ bool "SMDK2440"
+ select CPU_S3C2440
+ select MACH_SMDK
+ help
+ Say Y here if you are using the SMDK2440.
+
+config MACH_NEXCODER_2440
+ bool "NexVision NEXCODER 2440 Light Board"
+ select CPU_S3C2440
+ help
+ Say Y here if you are using the Nex Vision NEXCODER 2440 Light Board
+
+config SMDK2440_CPU2440
+ bool "SMDK2440 with S3C2440 CPU module"
+ depends on ARCH_S3C2440
+ default y if ARCH_S3C2440
+ select CPU_S3C2440
+
+
+endmenu
+
--- /dev/null
+# arch/arm/mach-s3c2440/Makefile
+#
+# Copyright 2007 Simtec Electronics
+#
+# Licensed under GPLv2
+
+obj-y :=
+obj-m :=
+obj-n :=
+obj- :=
+
+obj-$(CONFIG_CPU_S3C2440) += s3c2440.o dsc.o
+obj-$(CONFIG_CPU_S3C2440) += irq.o
+obj-$(CONFIG_CPU_S3C2440) += clock.o
+obj-$(CONFIG_S3C2440_DMA) += dma.o
+
+# Machine support
+
+obj-$(CONFIG_MACH_ANUBIS) += mach-anubis.o
+obj-$(CONFIG_MACH_OSIRIS) += mach-osiris.o
+obj-$(CONFIG_MACH_RX3715) += mach-rx3715.o
+obj-$(CONFIG_ARCH_S3C2440) += mach-smdk2440.o
+obj-$(CONFIG_MACH_NEXCODER_2440) += mach-nexcoder.o
-/* linux/arch/arm/mach-s3c2410/s3c2440-clock.c
+/* linux/arch/arm/mach-s3c2440/clock.c
*
* Copyright (c) 2004-2005 Simtec Electronics
* http://armlinux.simtec.co.uk/
#include <asm/arch/regs-clock.h>
-#include "clock.h"
-#include "cpu.h"
+#include <asm/plat-s3c24xx/clock.h>
+#include <asm/plat-s3c24xx/cpu.h>
/* S3C2440 extended clock support */
-/* linux/arch/arm/mach-s3c2410/s3c2440-dma.c
+/* linux/arch/arm/mach-s3c2440/dma.c
*
* Copyright (c) 2006 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
#include <asm/dma.h>
#include <asm/arch/dma.h>
-#include "dma.h"
-#include "cpu.h"
+#include <asm/plat-s3c24xx/dma.h>
+#include <asm/plat-s3c24xx/cpu.h>
#include <asm/arch/regs-serial.h>
#include <asm/arch/regs-gpio.h>
.map_size = ARRAY_SIZE(s3c2440_dma_mappings),
};
+static struct s3c24xx_dma_order __initdata s3c2440_dma_order = {
+ .channels = {
+ [DMACH_SDI] = {
+ .list = {
+ [0] = 3 | DMA_CH_VALID,
+ [1] = 2 | DMA_CH_VALID,
+ [2] = 1 | DMA_CH_VALID,
+ [3] = 0 | DMA_CH_VALID,
+ },
+ },
+ [DMACH_I2S_IN] = {
+ .list = {
+ [0] = 1 | DMA_CH_VALID,
+ [1] = 2 | DMA_CH_VALID,
+ },
+ },
+ [DMACH_I2S_OUT] = {
+ .list = {
+ [0] = 2 | DMA_CH_VALID,
+ [1] = 1 | DMA_CH_VALID,
+ },
+ },
+ [DMACH_PCM_IN] = {
+ .list = {
+ [0] = 2 | DMA_CH_VALID,
+ [1] = 1 | DMA_CH_VALID,
+ },
+ },
+ [DMACH_PCM_OUT] = {
+ .list = {
+ [0] = 1 | DMA_CH_VALID,
+ [1] = 3 | DMA_CH_VALID,
+ },
+ },
+ [DMACH_MIC_IN] = {
+ .list = {
+ [0] = 3 | DMA_CH_VALID,
+ [1] = 2 | DMA_CH_VALID,
+ },
+ },
+ },
+};
+
static int s3c2440_dma_add(struct sys_device *sysdev)
{
+ s3c2410_dma_init();
+ s3c24xx_dma_order_set(&s3c2440_dma_order);
return s3c24xx_dma_init_map(&s3c2440_dma_sel);
}
-/* linux/arch/arm/mach-s3c2410/s3c2440-dsc.c
+/* linux/arch/arm/mach-s3c2440/dsc.c
*
* Copyright (c) 2004-2005 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
#include <asm/arch/regs-gpio.h>
#include <asm/arch/regs-dsc.h>
-#include "cpu.h"
-#include "s3c2440.h"
+#include <asm/plat-s3c24xx/cpu.h>
+#include <asm/plat-s3c24xx/s3c2440.h>
int s3c2440_set_dsc(unsigned int pin, unsigned int value)
{
-/* linux/arch/arm/mach-s3c2410/s3c2440-irq.c
+/* linux/arch/arm/mach-s3c2440/irq.c
*
* Copyright (c) 2003,2004 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
#include <asm/arch/regs-irq.h>
#include <asm/arch/regs-gpio.h>
-#include "cpu.h"
-#include "pm.h"
-#include "irq.h"
+#include <asm/plat-s3c24xx/cpu.h>
+#include <asm/plat-s3c24xx/pm.h>
+#include <asm/plat-s3c24xx/irq.h>
/* WDT/AC97 */
-/* linux/arch/arm/mach-s3c2410/mach-anubis.c
+/* linux/arch/arm/mach-s3c2440/mach-anubis.c
*
* Copyright (c) 2003-2005 Simtec Electronics
* http://armlinux.simtec.co.uk/
#include <linux/mtd/nand_ecc.h>
#include <linux/mtd/partitions.h>
-#include "clock.h"
-#include "devs.h"
-#include "cpu.h"
+#include <asm/plat-s3c24xx/clock.h>
+#include <asm/plat-s3c24xx/devs.h>
+#include <asm/plat-s3c24xx/cpu.h>
#define COPYRIGHT ", (c) 2005 Simtec Electronics"
-/* linux/arch/arm/mach-s3c2410/mach-nexcoder.c
+/* linux/arch/arm/mach-s3c2440/mach-nexcoder.c
*
* Copyright (c) 2004 Nex Vision
* Guillaume GOURAT <guillaume.gourat@nexvision.tv>
#include <asm/arch/regs-gpio.h>
#include <asm/arch/regs-serial.h>
-#include "s3c2410.h"
-#include "s3c2440.h"
-#include "clock.h"
-#include "devs.h"
-#include "cpu.h"
+#include <asm/plat-s3c24xx/s3c2410.h>
+#include <asm/plat-s3c24xx/s3c2440.h>
+#include <asm/plat-s3c24xx/clock.h>
+#include <asm/plat-s3c24xx/devs.h>
+#include <asm/plat-s3c24xx/cpu.h>
static struct map_desc nexcoder_iodesc[] __initdata = {
/* nothing here yet */
-/* linux/arch/arm/mach-s3c2410/mach-osiris.c
+/* linux/arch/arm/mach-s3c2440/mach-osiris.c
*
* Copyright (c) 2005 Simtec Electronics
* http://armlinux.simtec.co.uk/
#include <linux/mtd/nand_ecc.h>
#include <linux/mtd/partitions.h>
-#include "clock.h"
-#include "devs.h"
-#include "cpu.h"
+#include <asm/plat-s3c24xx/clock.h>
+#include <asm/plat-s3c24xx/devs.h>
+#include <asm/plat-s3c24xx/cpu.h>
/* onboard perihpheral map */
-/* linux/arch/arm/mach-s3c2410/mach-rx3715.c
+/* linux/arch/arm/mach-s3c2440/mach-rx3715.c
*
* Copyright (c) 2003,2004 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
#include <asm/mach/irq.h>
#include <asm/hardware.h>
-#include <asm/hardware/iomd.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
#include <asm/arch/nand.h>
#include <asm/arch/fb.h>
-#include "clock.h"
-#include "devs.h"
-#include "cpu.h"
-#include "pm.h"
+#include <asm/plat-s3c24xx/clock.h>
+#include <asm/plat-s3c24xx/devs.h>
+#include <asm/plat-s3c24xx/cpu.h>
+#include <asm/plat-s3c24xx/pm.h>
static struct map_desc rx3715_iodesc[] __initdata = {
/* dump ISA space somewhere unused */
-/* linux/arch/arm/mach-s3c2410/mach-smdk2440.c
+/* linux/arch/arm/mach-s3c2440/mach-smdk2440.c
*
* Copyright (c) 2004,2005 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
#include <asm/mach/irq.h>
#include <asm/hardware.h>
-#include <asm/hardware/iomd.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
-//#include <asm/debug-ll.h>
#include <asm/arch/regs-serial.h>
#include <asm/arch/regs-gpio.h>
#include <asm/arch/regs-lcd.h>
#include <asm/arch/idle.h>
#include <asm/arch/fb.h>
-#include "s3c2410.h"
-#include "s3c2440.h"
-#include "clock.h"
-#include "devs.h"
-#include "cpu.h"
+#include <asm/plat-s3c24xx/s3c2410.h>
+#include <asm/plat-s3c24xx/s3c2440.h>
+#include <asm/plat-s3c24xx/clock.h>
+#include <asm/plat-s3c24xx/devs.h>
+#include <asm/plat-s3c24xx/cpu.h>
-#include "common-smdk.h"
+#include <asm/plat-s3c24xx/common-smdk.h>
static struct map_desc smdk2440_iodesc[] __initdata = {
/* ISA IO Space map (memory space selected by A24) */
#endif
.lpcsel = ((0xCE6) & ~7) | 1<<4,
+ .type = S3C2410_LCDCON1_TFT16BPP,
.width = 240,
.height = 320,
-/* linux/arch/arm/mach-s3c2410/s3c2440.c
+/* linux/arch/arm/mach-s3c2440/s3c2440.c
*
* Copyright (c) 2004-2006 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
#include <asm/io.h>
#include <asm/irq.h>
-#include "s3c2440.h"
-#include "devs.h"
-#include "cpu.h"
+#include <asm/plat-s3c24xx/s3c2440.h>
+#include <asm/plat-s3c24xx/devs.h>
+#include <asm/plat-s3c24xx/cpu.h>
static struct sys_device s3c2440_sysdev = {
.cls = &s3c2440_sysclass,
--- /dev/null
+# arch/arm/mach-s3c2442/Kconfig
+#
+# Copyright 2007 Simtec Electronics
+#
+# Licensed under GPLv2
+
+config CPU_S3C2442
+ bool
+ depends on ARCH_S3C2420
+ select S3C2410_CLOCK
+ select S3C2410_GPIO
+ select S3C2410_PM if PM
+ select CPU_S3C244X
+ help
+ Support for S3C2442 Samsung Mobile CPU based systems.
+
+
+menu "S3C2442 Machines"
+
+config SMDK2440_CPU2442
+ bool "SMDM2440 with S3C2442 CPU module"
+ depends on ARCH_S3C2440
+ select CPU_S3C2442
+
+
+endmenu
+
--- /dev/null
+# arch/arm/mach-s3c2442/Makefile
+#
+# Copyright 2007 Simtec Electronics
+#
+# Licensed under GPLv2
+
+obj-y :=
+obj-m :=
+obj-n :=
+obj- :=
+
+obj-$(CONFIG_CPU_S3C2442) += s3c2442.o
+obj-$(CONFIG_CPU_S3C2442) += clock.o
+
+# Machine support
+
-/* linux/arch/arm/mach-s3c2410/s3c2442-clock.c
+/* linux/arch/arm/mach-s3c2442/clock.c
*
* Copyright (c) 2004-2005 Simtec Electronics
* http://armlinux.simtec.co.uk/
#include <asm/arch/regs-clock.h>
-#include "clock.h"
-#include "cpu.h"
+#include <asm/plat-s3c24xx/clock.h>
+#include <asm/plat-s3c24xx/cpu.h>
/* S3C2442 extended clock support */
-/* linux/arch/arm/mach-s3c2410/s3c2442.c
+/* linux/arch/arm/mach-s3c2442/s3c2442.c
*
* Copyright (c) 2006 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
#include <linux/serial_core.h>
#include <linux/sysdev.h>
-#include "s3c2442.h"
-#include "cpu.h"
+#include <asm/plat-s3c24xx/s3c2442.h>
+#include <asm/plat-s3c24xx/cpu.h>
static struct sys_device s3c2442_sysdev = {
.cls = &s3c2442_sysclass,
--- /dev/null
+# arch/arm/mach-s3c2443/Kconfig
+#
+# Copyright 2007 Simtec Electronics
+#
+# Licensed under GPLv2
+
+config CPU_S3C2443
+ bool
+ depends on ARCH_S3C2410
+ select S3C2443_DMA if S3C2410_DMA
+ help
+ Support for the S3C2443 SoC from the S3C24XX line
+
+config S3C2443_DMA
+ bool
+ depends on CPU_S3C2443
+ help
+ Internal config node for S3C2443 DMA support
+
+menu "S3C2443 Machines"
+
+config MACH_SMDK2443
+ bool "SMDK2443"
+ select CPU_S3C2443
+ select MACH_SMDK
+ help
+ Say Y here if you are using an SMDK2443
+
+endmenu
--- /dev/null
+# arch/arm/mach-s3c2443/Makefile
+#
+# Copyright 2007 Simtec Electronics
+#
+# Licensed under GPLv2
+
+obj-y :=
+obj-m :=
+obj-n :=
+obj- :=
+
+obj-$(CONFIG_CPU_S3C2443) += s3c2443.o
+obj-$(CONFIG_CPU_S3C2443) += irq.o
+obj-$(CONFIG_CPU_S3C2443) += clock.o
+
+obj-$(CONFIG_S3C2443_DMA) += dma.o
+
+# Machine support
+
+obj-$(CONFIG_MACH_SMDK2443) += mach-smdk2443.o
--- /dev/null
+/* linux/arch/arm/mach-s3c2443/clock.c
+ *
+ * Copyright (c) 2007 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2443 Clock control support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/sysdev.h>
+#include <linux/clk.h>
+#include <linux/mutex.h>
+#include <linux/delay.h>
+#include <linux/serial_core.h>
+
+#include <asm/mach/map.h>
+
+#include <asm/hardware.h>
+#include <asm/io.h>
+
+#include <asm/arch/regs-s3c2443-clock.h>
+
+#include <asm/plat-s3c24xx/s3c2443.h>
+#include <asm/plat-s3c24xx/clock.h>
+#include <asm/plat-s3c24xx/cpu.h>
+
+/* We currently have to assume that the system is running
+ * from the XTPll input, and that all ***REFCLKs are being
+ * fed from it, as we cannot read the state of OM[4] from
+ * software.
+ *
+ * It would be possible for each board initialisation to
+ * set the correct muxing at initialisation
+*/
+
+static int s3c2443_clkcon_enable_h(struct clk *clk, int enable)
+{
+ unsigned int clocks = clk->ctrlbit;
+ unsigned long clkcon;
+
+ clkcon = __raw_readl(S3C2443_HCLKCON);
+
+ if (enable)
+ clkcon |= clocks;
+ else
+ clkcon &= ~clocks;
+
+ __raw_writel(clkcon, S3C2443_HCLKCON);
+
+ return 0;
+}
+
+static int s3c2443_clkcon_enable_p(struct clk *clk, int enable)
+{
+ unsigned int clocks = clk->ctrlbit;
+ unsigned long clkcon;
+
+ clkcon = __raw_readl(S3C2443_PCLKCON);
+
+ if (enable)
+ clkcon |= clocks;
+ else
+ clkcon &= ~clocks;
+
+ __raw_writel(clkcon, S3C2443_HCLKCON);
+
+ return 0;
+}
+
+static int s3c2443_clkcon_enable_s(struct clk *clk, int enable)
+{
+ unsigned int clocks = clk->ctrlbit;
+ unsigned long clkcon;
+
+ clkcon = __raw_readl(S3C2443_SCLKCON);
+
+ if (enable)
+ clkcon |= clocks;
+ else
+ clkcon &= ~clocks;
+
+ __raw_writel(clkcon, S3C2443_SCLKCON);
+
+ return 0;
+}
+
+static unsigned long s3c2443_roundrate_clksrc(struct clk *clk,
+ unsigned long rate,
+ unsigned int max)
+{
+ unsigned long parent_rate = clk_get_rate(clk->parent);
+ int div;
+
+ if (rate > parent_rate)
+ return parent_rate;
+
+ /* note, we remove the +/- 1 calculations as they cancel out */
+
+ div = (rate / parent_rate);
+
+ if (div < 1)
+ div = 1;
+ else if (div > max)
+ div = max;
+
+ return parent_rate / div;
+}
+
+static unsigned long s3c2443_roundrate_clksrc4(struct clk *clk,
+ unsigned long rate)
+{
+ return s3c2443_roundrate_clksrc(clk, rate, 4);
+}
+
+static unsigned long s3c2443_roundrate_clksrc16(struct clk *clk,
+ unsigned long rate)
+{
+ return s3c2443_roundrate_clksrc(clk, rate, 16);
+}
+
+static unsigned long s3c2443_roundrate_clksrc256(struct clk *clk,
+ unsigned long rate)
+{
+ return s3c2443_roundrate_clksrc(clk, rate, 256);
+}
+
+/* clock selections */
+
+/* CPU EXTCLK input */
+static struct clk clk_ext = {
+ .name = "ext",
+ .id = -1,
+};
+
+static struct clk clk_mpllref = {
+ .name = "mpllref",
+ .parent = &clk_xtal,
+ .id = -1,
+};
+
+#if 0
+static struct clk clk_mpll = {
+ .name = "mpll",
+ .parent = &clk_mpllref,
+ .id = -1,
+};
+#endif
+
+static struct clk clk_epllref;
+
+static struct clk clk_epll = {
+ .name = "epll",
+ .parent = &clk_epllref,
+ .id = -1,
+};
+
+static struct clk clk_i2s_ext = {
+ .name = "i2s-ext",
+ .id = -1,
+};
+
+static int s3c2443_setparent_epllref(struct clk *clk, struct clk *parent)
+{
+ unsigned long clksrc = __raw_readl(S3C2443_CLKSRC);
+
+ clksrc &= ~S3C2443_CLKSRC_EPLLREF_MASK;
+
+ if (parent == &clk_xtal)
+ clksrc |= S3C2443_CLKSRC_EPLLREF_XTAL;
+ else if (parent == &clk_ext)
+ clksrc |= S3C2443_CLKSRC_EPLLREF_EXTCLK;
+ else if (parent != &clk_mpllref)
+ return -EINVAL;
+
+ __raw_writel(clksrc, S3C2443_CLKSRC);
+ clk->parent = parent;
+
+ return 0;
+}
+
+static struct clk clk_epllref = {
+ .name = "epllref",
+ .id = -1,
+ .set_parent = s3c2443_setparent_epllref,
+};
+
+static unsigned long s3c2443_getrate_mdivclk(struct clk *clk)
+{
+ unsigned long parent_rate = clk_get_rate(clk->parent);
+ unsigned long div = __raw_readl(S3C2443_CLKDIV0);
+
+ div &= S3C2443_CLKDIV0_EXTDIV_MASK;
+ div >>= (S3C2443_CLKDIV0_EXTDIV_SHIFT-1); /* x2 */
+
+ return parent_rate / (div + 1);
+}
+
+static struct clk clk_mdivclk = {
+ .name = "mdivclk",
+ .parent = &clk_mpllref,
+ .id = -1,
+ .get_rate = s3c2443_getrate_mdivclk,
+};
+
+
+static int s3c2443_setparent_msysclk(struct clk *clk, struct clk *parent)
+{
+ unsigned long clksrc = __raw_readl(S3C2443_CLKSRC);
+
+ clksrc &= ~(S3C2443_CLKSRC_MSYSCLK_MPLL |
+ S3C2443_CLKSRC_EXTCLK_DIV);
+
+ if (parent == &clk_mpll)
+ clksrc |= S3C2443_CLKSRC_MSYSCLK_MPLL;
+ else if (parent == &clk_mdivclk)
+ clksrc |= S3C2443_CLKSRC_EXTCLK_DIV;
+ else if (parent != &clk_mpllref)
+ return -EINVAL;
+
+ __raw_writel(clksrc, S3C2443_CLKSRC);
+ clk->parent = parent;
+
+ return 0;
+}
+
+static struct clk clk_msysclk = {
+ .name = "msysclk",
+ .parent = &clk_xtal,
+ .id = -1,
+ .set_parent = s3c2443_setparent_msysclk,
+};
+
+
+/* esysclk
+ *
+ * this is sourced from either the EPLL or the EPLLref clock
+*/
+
+static int s3c2443_setparent_esysclk(struct clk *clk, struct clk *parent)
+{
+ unsigned long clksrc = __raw_readl(S3C2443_CLKSRC);
+
+ if (parent == &clk_epll)
+ clksrc |= S3C2443_CLKSRC_ESYSCLK_EPLL;
+ else if (parent == &clk_epllref)
+ clksrc &= ~S3C2443_CLKSRC_ESYSCLK_EPLL;
+ else
+ return -EINVAL;
+
+ __raw_writel(clksrc, S3C2443_CLKSRC);
+ clk->parent = parent;
+
+ return 0;
+}
+
+static struct clk clk_esysclk = {
+ .name = "esysclk",
+ .parent = &clk_epll,
+ .id = -1,
+ .set_parent = s3c2443_setparent_esysclk,
+};
+
+/* uartclk
+ *
+ * UART baud-rate clock sourced from esysclk via a divisor
+*/
+
+static unsigned long s3c2443_getrate_uart(struct clk *clk)
+{
+ unsigned long parent_rate = clk_get_rate(clk->parent);
+ unsigned long div = __raw_readl(S3C2443_CLKDIV1);
+
+ div &= S3C2443_CLKDIV1_UARTDIV_MASK;
+ div >>= S3C2443_CLKDIV1_UARTDIV_SHIFT;
+
+ return parent_rate / (div + 1);
+}
+
+
+static int s3c2443_setrate_uart(struct clk *clk, unsigned long rate)
+{
+ unsigned long parent_rate = clk_get_rate(clk->parent);
+ unsigned long clkdivn = __raw_readl(S3C2443_CLKDIV1);
+
+ rate = s3c2443_roundrate_clksrc16(clk, rate);
+ rate = parent_rate / rate;
+
+ clkdivn &= ~S3C2443_CLKDIV1_UARTDIV_MASK;
+ clkdivn |= (rate - 1) << S3C2443_CLKDIV1_UARTDIV_SHIFT;
+
+ __raw_writel(clkdivn, S3C2443_CLKDIV1);
+ return 0;
+}
+
+static struct clk clk_uart = {
+ .name = "uartclk",
+ .id = -1,
+ .parent = &clk_esysclk,
+ .get_rate = s3c2443_getrate_uart,
+ .set_rate = s3c2443_setrate_uart,
+ .round_rate = s3c2443_roundrate_clksrc16,
+};
+
+/* hsspi
+ *
+ * high-speed spi clock, sourced from esysclk
+*/
+
+static unsigned long s3c2443_getrate_hsspi(struct clk *clk)
+{
+ unsigned long parent_rate = clk_get_rate(clk->parent);
+ unsigned long div = __raw_readl(S3C2443_CLKDIV1);
+
+ div &= S3C2443_CLKDIV1_HSSPIDIV_MASK;
+ div >>= S3C2443_CLKDIV1_HSSPIDIV_SHIFT;
+
+ return parent_rate / (div + 1);
+}
+
+
+static int s3c2443_setrate_hsspi(struct clk *clk, unsigned long rate)
+{
+ unsigned long parent_rate = clk_get_rate(clk->parent);
+ unsigned long clkdivn = __raw_readl(S3C2443_CLKDIV1);
+
+ rate = s3c2443_roundrate_clksrc4(clk, rate);
+ rate = parent_rate / rate;
+
+ clkdivn &= ~S3C2443_CLKDIV1_HSSPIDIV_MASK;
+ clkdivn |= (rate - 1) << S3C2443_CLKDIV1_HSSPIDIV_SHIFT;
+
+ __raw_writel(clkdivn, S3C2443_CLKDIV1);
+ return 0;
+}
+
+static struct clk clk_hsspi = {
+ .name = "hsspi",
+ .id = -1,
+ .parent = &clk_esysclk,
+ .ctrlbit = S3C2443_SCLKCON_HSSPICLK,
+ .enable = s3c2443_clkcon_enable_s,
+ .get_rate = s3c2443_getrate_hsspi,
+ .set_rate = s3c2443_setrate_hsspi,
+ .round_rate = s3c2443_roundrate_clksrc4,
+};
+
+/* usbhost
+ *
+ * usb host bus-clock, usually 48MHz to provide USB bus clock timing
+*/
+
+static unsigned long s3c2443_getrate_usbhost(struct clk *clk)
+{
+ unsigned long parent_rate = clk_get_rate(clk->parent);
+ unsigned long div = __raw_readl(S3C2443_CLKDIV1);
+
+ div &= S3C2443_CLKDIV1_USBHOSTDIV_MASK;
+ div >>= S3C2443_CLKDIV1_USBHOSTDIV_SHIFT;
+
+ return parent_rate / (div + 1);
+}
+
+static int s3c2443_setrate_usbhost(struct clk *clk, unsigned long rate)
+{
+ unsigned long parent_rate = clk_get_rate(clk->parent);
+ unsigned long clkdivn = __raw_readl(S3C2443_CLKDIV1);
+
+ rate = s3c2443_roundrate_clksrc4(clk, rate);
+ rate = parent_rate / rate;
+
+ clkdivn &= ~S3C2443_CLKDIV1_USBHOSTDIV_MASK;
+ clkdivn |= (rate - 1) << S3C2443_CLKDIV1_USBHOSTDIV_SHIFT;
+
+ __raw_writel(clkdivn, S3C2443_CLKDIV1);
+ return 0;
+}
+
+struct clk clk_usb_bus_host = {
+ .name = "usb-bus-host-parent",
+ .id = -1,
+ .parent = &clk_esysclk,
+ .ctrlbit = S3C2443_SCLKCON_USBHOST,
+ .enable = s3c2443_clkcon_enable_s,
+ .get_rate = s3c2443_getrate_usbhost,
+ .set_rate = s3c2443_setrate_usbhost,
+ .round_rate = s3c2443_roundrate_clksrc4,
+};
+
+/* clk_hsmcc_div
+ *
+ * this clock is sourced from epll, and is fed through a divider,
+ * to a mux controlled by sclkcon where either it or a extclk can
+ * be fed to the hsmmc block
+*/
+
+static unsigned long s3c2443_getrate_hsmmc_div(struct clk *clk)
+{
+ unsigned long parent_rate = clk_get_rate(clk->parent);
+ unsigned long div = __raw_readl(S3C2443_CLKDIV1);
+
+ div &= S3C2443_CLKDIV1_HSMMCDIV_MASK;
+ div >>= S3C2443_CLKDIV1_HSMMCDIV_SHIFT;
+
+ return parent_rate / (div + 1);
+}
+
+static int s3c2443_setrate_hsmmc_div(struct clk *clk, unsigned long rate)
+{
+ unsigned long parent_rate = clk_get_rate(clk->parent);
+ unsigned long clkdivn = __raw_readl(S3C2443_CLKDIV1);
+
+ rate = s3c2443_roundrate_clksrc4(clk, rate);
+ rate = parent_rate / rate;
+
+ clkdivn &= ~S3C2443_CLKDIV1_HSMMCDIV_MASK;
+ clkdivn |= (rate - 1) << S3C2443_CLKDIV1_HSMMCDIV_SHIFT;
+
+ __raw_writel(clkdivn, S3C2443_CLKDIV1);
+ return 0;
+}
+
+static struct clk clk_hsmmc_div = {
+ .name = "hsmmc-div",
+ .id = -1,
+ .parent = &clk_esysclk,
+ .get_rate = s3c2443_getrate_hsmmc_div,
+ .set_rate = s3c2443_setrate_hsmmc_div,
+ .round_rate = s3c2443_roundrate_clksrc4,
+};
+
+static int s3c2443_setparent_hsmmc(struct clk *clk, struct clk *parent)
+{
+ unsigned long clksrc = __raw_readl(S3C2443_SCLKCON);
+
+ clksrc &= ~(S3C2443_SCLKCON_HSMMCCLK_EXT |
+ S3C2443_SCLKCON_HSMMCCLK_EPLL);
+
+ if (parent == &clk_epll)
+ clksrc |= S3C2443_SCLKCON_HSMMCCLK_EPLL;
+ else if (parent == &clk_ext)
+ clksrc |= S3C2443_SCLKCON_HSMMCCLK_EXT;
+ else
+ return -EINVAL;
+
+ if (clk->usage > 0) {
+ __raw_writel(clksrc, S3C2443_SCLKCON);
+ }
+
+ clk->parent = parent;
+ return 0;
+}
+
+static int s3c2443_enable_hsmmc(struct clk *clk, int enable)
+{
+ return s3c2443_setparent_hsmmc(clk, clk->parent);
+}
+
+static struct clk clk_hsmmc = {
+ .name = "hsmmc-if",
+ .id = -1,
+ .parent = &clk_hsmmc_div,
+ .enable = s3c2443_enable_hsmmc,
+ .set_parent = s3c2443_setparent_hsmmc,
+};
+
+/* i2s_eplldiv
+ *
+ * this clock is the output from the i2s divisor of esysclk
+*/
+
+static unsigned long s3c2443_getrate_i2s_eplldiv(struct clk *clk)
+{
+ unsigned long parent_rate = clk_get_rate(clk->parent);
+ unsigned long div = __raw_readl(S3C2443_CLKDIV1);
+
+ div &= S3C2443_CLKDIV1_I2SDIV_MASK;
+ div >>= S3C2443_CLKDIV1_I2SDIV_SHIFT;
+
+ return parent_rate / (div + 1);
+}
+
+static int s3c2443_setrate_i2s_eplldiv(struct clk *clk, unsigned long rate)
+{
+ unsigned long parent_rate = clk_get_rate(clk->parent);
+ unsigned long clkdivn = __raw_readl(S3C2443_CLKDIV1);
+
+ rate = s3c2443_roundrate_clksrc16(clk, rate);
+ rate = parent_rate / rate;
+
+ clkdivn &= ~S3C2443_CLKDIV1_I2SDIV_MASK;
+ clkdivn |= (rate - 1) << S3C2443_CLKDIV1_I2SDIV_SHIFT;
+
+ __raw_writel(clkdivn, S3C2443_CLKDIV1);
+ return 0;
+}
+
+static struct clk clk_i2s_eplldiv = {
+ .name = "i2s-eplldiv",
+ .id = -1,
+ .parent = &clk_esysclk,
+ .get_rate = s3c2443_getrate_i2s_eplldiv,
+ .set_rate = s3c2443_setrate_i2s_eplldiv,
+ .round_rate = s3c2443_roundrate_clksrc16,
+};
+
+/* i2s-ref
+ *
+ * i2s bus reference clock, selectable from external, esysclk or epllref
+*/
+
+static int s3c2443_setparent_i2s(struct clk *clk, struct clk *parent)
+{
+ unsigned long clksrc = __raw_readl(S3C2443_CLKSRC);
+
+ clksrc &= ~S3C2443_CLKSRC_I2S_MASK;
+
+ if (parent == &clk_epllref)
+ clksrc |= S3C2443_CLKSRC_I2S_EPLLREF;
+ else if (parent == &clk_i2s_ext)
+ clksrc |= S3C2443_CLKSRC_I2S_EXT;
+ else if (parent != &clk_i2s_eplldiv)
+ return -EINVAL;
+
+ clk->parent = parent;
+ __raw_writel(clksrc, S3C2443_CLKSRC);
+
+ return 0;
+}
+
+static struct clk clk_i2s = {
+ .name = "i2s-if",
+ .id = -1,
+ .parent = &clk_i2s_eplldiv,
+ .ctrlbit = S3C2443_SCLKCON_I2SCLK,
+ .enable = s3c2443_clkcon_enable_s,
+ .set_parent = s3c2443_setparent_i2s,
+};
+
+/* cam-if
+ *
+ * camera interface bus-clock, divided down from esysclk
+*/
+
+static unsigned long s3c2443_getrate_cam(struct clk *clk)
+{
+ unsigned long parent_rate = clk_get_rate(clk->parent);
+ unsigned long div = __raw_readl(S3C2443_CLKDIV1);
+
+ div &= S3C2443_CLKDIV1_CAMDIV_MASK;
+ div >>= S3C2443_CLKDIV1_CAMDIV_SHIFT;
+
+ return parent_rate / (div + 1);
+}
+
+static int s3c2443_setrate_cam(struct clk *clk, unsigned long rate)
+{
+ unsigned long parent_rate = clk_get_rate(clk->parent);
+ unsigned long clkdiv1 = __raw_readl(S3C2443_CLKDIV1);
+
+ rate = s3c2443_roundrate_clksrc16(clk, rate);
+ rate = parent_rate / rate;
+
+ clkdiv1 &= ~S3C2443_CLKDIV1_CAMDIV_MASK;
+ clkdiv1 |= (rate - 1) << S3C2443_CLKDIV1_CAMDIV_SHIFT;
+
+ __raw_writel(clkdiv1, S3C2443_CLKDIV1);
+ return 0;
+}
+
+static struct clk clk_cam = {
+ .name = "camif-upll", /* same as 2440 name */
+ .id = -1,
+ .parent = &clk_esysclk,
+ .ctrlbit = S3C2443_SCLKCON_CAMCLK,
+ .enable = s3c2443_clkcon_enable_s,
+ .get_rate = s3c2443_getrate_cam,
+ .set_rate = s3c2443_setrate_cam,
+ .round_rate = s3c2443_roundrate_clksrc16,
+};
+
+/* display-if
+ *
+ * display interface clock, divided from esysclk
+*/
+
+static unsigned long s3c2443_getrate_display(struct clk *clk)
+{
+ unsigned long parent_rate = clk_get_rate(clk->parent);
+ unsigned long div = __raw_readl(S3C2443_CLKDIV1);
+
+ div &= S3C2443_CLKDIV1_DISPDIV_MASK;
+ div >>= S3C2443_CLKDIV1_DISPDIV_SHIFT;
+
+ return parent_rate / (div + 1);
+}
+
+static int s3c2443_setrate_display(struct clk *clk, unsigned long rate)
+{
+ unsigned long parent_rate = clk_get_rate(clk->parent);
+ unsigned long clkdivn = __raw_readl(S3C2443_CLKDIV1);
+
+ rate = s3c2443_roundrate_clksrc256(clk, rate);
+ rate = parent_rate / rate;
+
+ clkdivn &= ~S3C2443_CLKDIV1_UARTDIV_MASK;
+ clkdivn |= (rate - 1) << S3C2443_CLKDIV1_UARTDIV_SHIFT;
+
+ __raw_writel(clkdivn, S3C2443_CLKDIV1);
+ return 0;
+}
+
+static struct clk clk_display = {
+ .name = "display-if",
+ .id = -1,
+ .parent = &clk_esysclk,
+ .ctrlbit = S3C2443_SCLKCON_DISPCLK,
+ .enable = s3c2443_clkcon_enable_s,
+ .get_rate = s3c2443_getrate_display,
+ .set_rate = s3c2443_setrate_display,
+ .round_rate = s3c2443_roundrate_clksrc256,
+};
+
+/* standard clock definitions */
+
+static struct clk init_clocks_disable[] = {
+ {
+ .name = "nand",
+ .id = -1,
+ .parent = &clk_h,
+ }, {
+ .name = "sdi",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s3c2443_clkcon_enable_p,
+ .ctrlbit = S3C2443_PCLKCON_SDI,
+ }, {
+ .name = "adc",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s3c2443_clkcon_enable_p,
+ .ctrlbit = S3C2443_PCLKCON_ADC,
+ }, {
+ .name = "i2c",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s3c2443_clkcon_enable_p,
+ .ctrlbit = S3C2443_PCLKCON_IIC,
+ }, {
+ .name = "iis",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s3c2443_clkcon_enable_p,
+ .ctrlbit = S3C2443_PCLKCON_IIS,
+ }, {
+ .name = "spi",
+ .id = 0,
+ .parent = &clk_p,
+ .enable = s3c2443_clkcon_enable_p,
+ .ctrlbit = S3C2443_PCLKCON_SPI0,
+ }, {
+ .name = "spi",
+ .id = 1,
+ .parent = &clk_p,
+ .enable = s3c2443_clkcon_enable_p,
+ .ctrlbit = S3C2443_PCLKCON_SPI1,
+ }
+};
+
+static struct clk init_clocks[] = {
+ {
+ .name = "dma",
+ .id = 0,
+ .parent = &clk_h,
+ .enable = s3c2443_clkcon_enable_h,
+ .ctrlbit = S3C2443_HCLKCON_DMA0,
+ }, {
+ .name = "dma",
+ .id = 1,
+ .parent = &clk_h,
+ .enable = s3c2443_clkcon_enable_h,
+ .ctrlbit = S3C2443_HCLKCON_DMA1,
+ }, {
+ .name = "dma",
+ .id = 2,
+ .parent = &clk_h,
+ .enable = s3c2443_clkcon_enable_h,
+ .ctrlbit = S3C2443_HCLKCON_DMA2,
+ }, {
+ .name = "dma",
+ .id = 3,
+ .parent = &clk_h,
+ .enable = s3c2443_clkcon_enable_h,
+ .ctrlbit = S3C2443_HCLKCON_DMA3,
+ }, {
+ .name = "dma",
+ .id = 4,
+ .parent = &clk_h,
+ .enable = s3c2443_clkcon_enable_h,
+ .ctrlbit = S3C2443_HCLKCON_DMA4,
+ }, {
+ .name = "dma",
+ .id = 5,
+ .parent = &clk_h,
+ .enable = s3c2443_clkcon_enable_h,
+ .ctrlbit = S3C2443_HCLKCON_DMA5,
+ }, {
+ .name = "lcd",
+ .id = -1,
+ .parent = &clk_h,
+ .enable = s3c2443_clkcon_enable_h,
+ .ctrlbit = S3C2443_HCLKCON_LCDC,
+ }, {
+ .name = "gpio",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s3c2443_clkcon_enable_p,
+ .ctrlbit = S3C2443_PCLKCON_GPIO,
+ }, {
+ .name = "usb-host",
+ .id = -1,
+ .parent = &clk_h,
+ .enable = s3c2443_clkcon_enable_h,
+ .ctrlbit = S3C2443_HCLKCON_USBH,
+ }, {
+ .name = "usb-device",
+ .id = -1,
+ .parent = &clk_h,
+ .enable = s3c2443_clkcon_enable_h,
+ .ctrlbit = S3C2443_HCLKCON_USBD,
+ }, {
+ .name = "timers",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s3c2443_clkcon_enable_p,
+ .ctrlbit = S3C2443_PCLKCON_PWMT,
+ }, {
+ .name = "uart",
+ .id = 0,
+ .parent = &clk_p,
+ .enable = s3c2443_clkcon_enable_p,
+ .ctrlbit = S3C2443_PCLKCON_UART0,
+ }, {
+ .name = "uart",
+ .id = 1,
+ .parent = &clk_p,
+ .enable = s3c2443_clkcon_enable_p,
+ .ctrlbit = S3C2443_PCLKCON_UART1,
+ }, {
+ .name = "uart",
+ .id = 2,
+ .parent = &clk_p,
+ .enable = s3c2443_clkcon_enable_p,
+ .ctrlbit = S3C2443_PCLKCON_UART2,
+ }, {
+ .name = "uart",
+ .id = 3,
+ .parent = &clk_p,
+ .enable = s3c2443_clkcon_enable_p,
+ .ctrlbit = S3C2443_PCLKCON_UART3,
+ }, {
+ .name = "rtc",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s3c2443_clkcon_enable_p,
+ .ctrlbit = S3C2443_PCLKCON_RTC,
+ }, {
+ .name = "watchdog",
+ .id = -1,
+ .parent = &clk_p,
+ .ctrlbit = S3C2443_PCLKCON_WDT,
+ }, {
+ .name = "usb-bus-host",
+ .id = -1,
+ .parent = &clk_usb_bus_host,
+ }
+};
+
+/* clocks to add where we need to check their parentage */
+
+/* s3c2443_clk_initparents
+ *
+ * Initialise the parents for the clocks that we get at start-time
+*/
+
+static int __init clk_init_set_parent(struct clk *clk, struct clk *parent)
+{
+ printk(KERN_DEBUG "clock %s: parent %s\n", clk->name, parent->name);
+ return clk_set_parent(clk, parent);
+}
+
+static void __init s3c2443_clk_initparents(void)
+{
+ unsigned long clksrc = __raw_readl(S3C2443_CLKSRC);
+ struct clk *parent;
+
+ switch (clksrc & S3C2443_CLKSRC_EPLLREF_MASK) {
+ case S3C2443_CLKSRC_EPLLREF_EXTCLK:
+ parent = &clk_ext;
+ break;
+
+ case S3C2443_CLKSRC_EPLLREF_XTAL:
+ default:
+ parent = &clk_xtal;
+ break;
+
+ case S3C2443_CLKSRC_EPLLREF_MPLLREF:
+ case S3C2443_CLKSRC_EPLLREF_MPLLREF2:
+ parent = &clk_mpllref;
+ break;
+ }
+
+ clk_init_set_parent(&clk_epllref, parent);
+
+ switch (clksrc & S3C2443_CLKSRC_I2S_MASK) {
+ case S3C2443_CLKSRC_I2S_EXT:
+ parent = &clk_i2s_ext;
+ break;
+
+ case S3C2443_CLKSRC_I2S_EPLLDIV:
+ default:
+ parent = &clk_i2s_eplldiv;
+ break;
+
+ case S3C2443_CLKSRC_I2S_EPLLREF:
+ case S3C2443_CLKSRC_I2S_EPLLREF3:
+ parent = &clk_epllref;
+ }
+
+ clk_init_set_parent(&clk_i2s, &clk_epllref);
+
+ /* esysclk source */
+
+ parent = (clksrc & S3C2443_CLKSRC_ESYSCLK_EPLL) ?
+ &clk_epll : &clk_epllref;
+
+ clk_init_set_parent(&clk_esysclk, parent);
+
+ /* msysclk source */
+
+ if (clksrc & S3C2443_CLKSRC_MSYSCLK_MPLL) {
+ parent = &clk_mpll;
+ } else {
+ parent = (clksrc & S3C2443_CLKSRC_EXTCLK_DIV) ?
+ &clk_mdivclk : &clk_mpllref;
+ }
+
+ clk_init_set_parent(&clk_msysclk, parent);
+}
+
+/* armdiv divisor table */
+
+static unsigned int armdiv[16] = {
+ [S3C2443_CLKDIV0_ARMDIV_1 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 1,
+ [S3C2443_CLKDIV0_ARMDIV_2 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 2,
+ [S3C2443_CLKDIV0_ARMDIV_3 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 3,
+ [S3C2443_CLKDIV0_ARMDIV_4 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 4,
+ [S3C2443_CLKDIV0_ARMDIV_6 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 6,
+ [S3C2443_CLKDIV0_ARMDIV_8 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 8,
+ [S3C2443_CLKDIV0_ARMDIV_12 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 12,
+ [S3C2443_CLKDIV0_ARMDIV_16 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 16,
+};
+
+static inline unsigned int s3c2443_fclk_div(unsigned long clkcon0)
+{
+ clkcon0 &= S3C2443_CLKDIV0_ARMDIV_MASK;
+
+ return armdiv[clkcon0 >> S3C2443_CLKDIV0_ARMDIV_SHIFT];
+}
+
+static inline unsigned long s3c2443_get_prediv(unsigned long clkcon0)
+{
+ clkcon0 &= S3C2443_CLKDIV0_PREDIV_MASK;
+ clkcon0 >>= S3C2443_CLKDIV0_PREDIV_SHIFT;
+
+ return clkcon0 + 1;
+}
+
+/* clocks to add straight away */
+
+static struct clk *clks[] __initdata = {
+ &clk_ext,
+ &clk_epll,
+ &clk_usb_bus_host,
+ &clk_usb_bus,
+ &clk_esysclk,
+ &clk_epllref,
+ &clk_mpllref,
+ &clk_msysclk,
+ &clk_uart,
+ &clk_display,
+ &clk_cam,
+ &clk_i2s_eplldiv,
+ &clk_i2s,
+ &clk_hsspi,
+ &clk_hsmmc_div,
+ &clk_hsmmc,
+};
+
+void __init s3c2443_init_clocks(int xtal)
+{
+ unsigned long epllcon = __raw_readl(S3C2443_EPLLCON);
+ unsigned long mpllcon = __raw_readl(S3C2443_MPLLCON);
+ unsigned long clkdiv0 = __raw_readl(S3C2443_CLKDIV0);
+ unsigned long pll;
+ unsigned long fclk;
+ unsigned long hclk;
+ unsigned long pclk;
+ struct clk *clkp;
+ int ret;
+ int ptr;
+
+ pll = s3c2443_get_mpll(mpllcon, xtal);
+
+ fclk = pll / s3c2443_fclk_div(clkdiv0);
+ hclk = fclk / s3c2443_get_prediv(clkdiv0);
+ hclk = hclk / ((clkdiv0 & S3C2443_CLKDIV0_HALF_HCLK) ? 2 : 1);
+ pclk = hclk / ((clkdiv0 & S3C2443_CLKDIV0_HALF_PCLK) ? 2 : 1);
+
+ s3c24xx_setup_clocks(xtal, fclk, hclk, pclk);
+
+ printk("S3C2443: mpll %s %ld.%03ld MHz, cpu %ld.%03ld MHz, mem %ld.%03ld MHz, pclk %ld.%03ld MHz\n",
+ (mpllcon & S3C2443_PLLCON_OFF) ? "off":"on",
+ print_mhz(pll), print_mhz(fclk),
+ print_mhz(hclk), print_mhz(pclk));
+
+ s3c2443_clk_initparents();
+
+ for (ptr = 0; ptr < ARRAY_SIZE(clks); ptr++) {
+ clkp = clks[ptr];
+
+ ret = s3c24xx_register_clock(clkp);
+ if (ret < 0) {
+ printk(KERN_ERR "Failed to register clock %s (%d)\n",
+ clkp->name, ret);
+ }
+ }
+
+ clk_epll.rate = s3c2443_get_epll(epllcon, xtal);
+
+ clk_usb_bus.parent = &clk_usb_bus_host;
+
+ /* ensure usb bus clock is within correct rate of 48MHz */
+
+ if (clk_get_rate(&clk_usb_bus_host) != (48 * 1000 * 1000)) {
+ printk(KERN_INFO "Warning: USB host bus not at 48MHz\n");
+ clk_set_rate(&clk_usb_bus_host, 48*1000*1000);
+ }
+
+ printk("S3C2443: epll %s %ld.%03ld MHz, usb-bus %ld.%03ld MHz\n",
+ (epllcon & S3C2443_PLLCON_OFF) ? "off":"on",
+ print_mhz(clk_get_rate(&clk_epll)),
+ print_mhz(clk_get_rate(&clk_usb_bus)));
+
+ /* register clocks from clock array */
+
+ clkp = init_clocks;
+ for (ptr = 0; ptr < ARRAY_SIZE(init_clocks); ptr++, clkp++) {
+ ret = s3c24xx_register_clock(clkp);
+ if (ret < 0) {
+ printk(KERN_ERR "Failed to register clock %s (%d)\n",
+ clkp->name, ret);
+ }
+ }
+
+ /* We must be careful disabling the clocks we are not intending to
+ * be using at boot time, as subsytems such as the LCD which do
+ * their own DMA requests to the bus can cause the system to lockup
+ * if they where in the middle of requesting bus access.
+ *
+ * Disabling the LCD clock if the LCD is active is very dangerous,
+ * and therefore the bootloader should be careful to not enable
+ * the LCD clock if it is not needed.
+ */
+
+ /* install (and disable) the clocks we do not need immediately */
+
+ clkp = init_clocks_disable;
+ for (ptr = 0; ptr < ARRAY_SIZE(init_clocks_disable); ptr++, clkp++) {
+
+ ret = s3c24xx_register_clock(clkp);
+ if (ret < 0) {
+ printk(KERN_ERR "Failed to register clock %s (%d)\n",
+ clkp->name, ret);
+ }
+
+ (clkp->enable)(clkp, 0);
+ }
+}
--- /dev/null
+/* linux/arch/arm/mach-s3c2443/dma.c
+ *
+ * Copyright (c) 2007 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2443 DMA selection
+ *
+ * http://armlinux.simtec.co.uk/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/sysdev.h>
+#include <linux/serial_core.h>
+
+#include <asm/dma.h>
+#include <asm/arch/dma.h>
+#include <asm/io.h>
+
+#include <asm/plat-s3c24xx/dma.h>
+#include <asm/plat-s3c24xx/cpu.h>
+
+#include <asm/arch/regs-serial.h>
+#include <asm/arch/regs-gpio.h>
+#include <asm/arch/regs-ac97.h>
+#include <asm/arch/regs-mem.h>
+#include <asm/arch/regs-lcd.h>
+#include <asm/arch/regs-sdi.h>
+#include <asm/arch/regs-iis.h>
+#include <asm/arch/regs-spi.h>
+
+#define MAP(x) { \
+ [0] = (x) | DMA_CH_VALID, \
+ [1] = (x) | DMA_CH_VALID, \
+ [2] = (x) | DMA_CH_VALID, \
+ [3] = (x) | DMA_CH_VALID, \
+ [4] = (x) | DMA_CH_VALID, \
+ [5] = (x) | DMA_CH_VALID, \
+ }
+
+static struct s3c24xx_dma_map __initdata s3c2443_dma_mappings[] = {
+ [DMACH_XD0] = {
+ .name = "xdreq0",
+ .channels = MAP(S3C2443_DMAREQSEL_XDREQ0),
+ },
+ [DMACH_XD1] = {
+ .name = "xdreq1",
+ .channels = MAP(S3C2443_DMAREQSEL_XDREQ1),
+ },
+ [DMACH_SDI] = {
+ .name = "sdi",
+ .channels = MAP(S3C2443_DMAREQSEL_SDI),
+ .hw_addr.to = S3C2410_PA_IIS + S3C2410_IISFIFO,
+ .hw_addr.from = S3C2410_PA_IIS + S3C2410_IISFIFO,
+ },
+ [DMACH_SPI0] = {
+ .name = "spi0",
+ .channels = MAP(S3C2443_DMAREQSEL_SPI0TX),
+ .hw_addr.to = S3C2410_PA_SPI + S3C2410_SPTDAT,
+ .hw_addr.from = S3C2410_PA_SPI + S3C2410_SPRDAT,
+ },
+ [DMACH_SPI1] = {
+ .name = "spi1",
+ .channels = MAP(S3C2443_DMAREQSEL_SPI1TX),
+ .hw_addr.to = S3C2410_PA_SPI + 0x20 + S3C2410_SPTDAT,
+ .hw_addr.from = S3C2410_PA_SPI + 0x20 + S3C2410_SPRDAT,
+ },
+ [DMACH_UART0] = {
+ .name = "uart0",
+ .channels = MAP(S3C2443_DMAREQSEL_UART0_0),
+ .hw_addr.to = S3C2410_PA_UART0 + S3C2410_UTXH,
+ .hw_addr.from = S3C2410_PA_UART0 + S3C2410_URXH,
+ },
+ [DMACH_UART1] = {
+ .name = "uart1",
+ .channels = MAP(S3C2443_DMAREQSEL_UART1_0),
+ .hw_addr.to = S3C2410_PA_UART1 + S3C2410_UTXH,
+ .hw_addr.from = S3C2410_PA_UART1 + S3C2410_URXH,
+ },
+ [DMACH_UART2] = {
+ .name = "uart2",
+ .channels = MAP(S3C2443_DMAREQSEL_UART2_0),
+ .hw_addr.to = S3C2410_PA_UART2 + S3C2410_UTXH,
+ .hw_addr.from = S3C2410_PA_UART2 + S3C2410_URXH,
+ },
+ [DMACH_UART3] = {
+ .name = "uart3",
+ .channels = MAP(S3C2443_DMAREQSEL_UART3_0),
+ .hw_addr.to = S3C2443_PA_UART3 + S3C2410_UTXH,
+ .hw_addr.from = S3C2443_PA_UART3 + S3C2410_URXH,
+ },
+ [DMACH_UART0_SRC2] = {
+ .name = "uart0",
+ .channels = MAP(S3C2443_DMAREQSEL_UART0_1),
+ .hw_addr.to = S3C2410_PA_UART0 + S3C2410_UTXH,
+ .hw_addr.from = S3C2410_PA_UART0 + S3C2410_URXH,
+ },
+ [DMACH_UART1_SRC2] = {
+ .name = "uart1",
+ .channels = MAP(S3C2443_DMAREQSEL_UART1_1),
+ .hw_addr.to = S3C2410_PA_UART1 + S3C2410_UTXH,
+ .hw_addr.from = S3C2410_PA_UART1 + S3C2410_URXH,
+ },
+ [DMACH_UART2_SRC2] = {
+ .name = "uart2",
+ .channels = MAP(S3C2443_DMAREQSEL_UART2_1),
+ .hw_addr.to = S3C2410_PA_UART2 + S3C2410_UTXH,
+ .hw_addr.from = S3C2410_PA_UART2 + S3C2410_URXH,
+ },
+ [DMACH_UART3_SRC2] = {
+ .name = "uart3",
+ .channels = MAP(S3C2443_DMAREQSEL_UART3_1),
+ .hw_addr.to = S3C2443_PA_UART3 + S3C2410_UTXH,
+ .hw_addr.from = S3C2443_PA_UART3 + S3C2410_URXH,
+ },
+ [DMACH_TIMER] = {
+ .name = "timer",
+ .channels = MAP(S3C2443_DMAREQSEL_TIMER),
+ },
+ [DMACH_I2S_IN] = {
+ .name = "i2s-sdi",
+ .channels = MAP(S3C2443_DMAREQSEL_I2SRX),
+ .hw_addr.from = S3C2410_PA_IIS + S3C2410_IISFIFO,
+ },
+ [DMACH_I2S_OUT] = {
+ .name = "i2s-sdo",
+ .channels = MAP(S3C2443_DMAREQSEL_I2STX),
+ .hw_addr.to = S3C2410_PA_IIS + S3C2410_IISFIFO,
+ },
+ [DMACH_PCM_IN] = {
+ .name = "pcm-in",
+ .channels = MAP(S3C2443_DMAREQSEL_PCMIN),
+ .hw_addr.from = S3C2440_PA_AC97 + S3C_AC97_PCM_DATA,
+ },
+ [DMACH_PCM_OUT] = {
+ .name = "pcm-out",
+ .channels = MAP(S3C2443_DMAREQSEL_PCMOUT),
+ .hw_addr.to = S3C2440_PA_AC97 + S3C_AC97_PCM_DATA,
+ },
+ [DMACH_MIC_IN] = {
+ .name = "mic-in",
+ .channels = MAP(S3C2443_DMAREQSEL_MICIN),
+ .hw_addr.from = S3C2440_PA_AC97 + S3C_AC97_MIC_DATA,
+ },
+};
+
+static void s3c2443_dma_select(struct s3c2410_dma_chan *chan,
+ struct s3c24xx_dma_map *map)
+{
+ writel(map->channels[0] | S3C2443_DMAREQSEL_HW,
+ chan->regs + S3C2443_DMA_DMAREQSEL);
+}
+
+static struct s3c24xx_dma_selection __initdata s3c2443_dma_sel = {
+ .select = s3c2443_dma_select,
+ .dcon_mask = 0,
+ .map = s3c2443_dma_mappings,
+ .map_size = ARRAY_SIZE(s3c2443_dma_mappings),
+};
+
+static int s3c2443_dma_add(struct sys_device *sysdev)
+{
+ s3c24xx_dma_init(6, IRQ_S3C2443_DMA0, 0x100);
+ return s3c24xx_dma_init_map(&s3c2443_dma_sel);
+}
+
+static struct sysdev_driver s3c2443_dma_driver = {
+ .add = s3c2443_dma_add,
+};
+
+static int __init s3c2443_dma_init(void)
+{
+ return sysdev_driver_register(&s3c2443_sysclass, &s3c2443_dma_driver);
+}
+
+arch_initcall(s3c2443_dma_init);
--- /dev/null
+/* linux/arch/arm/mach-s3c2443/irq.c
+ *
+ * Copyright (c) 2007 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/ptrace.h>
+#include <linux/sysdev.h>
+
+#include <asm/hardware.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+
+#include <asm/mach/irq.h>
+
+#include <asm/arch/regs-irq.h>
+#include <asm/arch/regs-gpio.h>
+
+#include <asm/plat-s3c24xx/cpu.h>
+#include <asm/plat-s3c24xx/pm.h>
+#include <asm/plat-s3c24xx/irq.h>
+
+#define INTMSK(start, end) ((1 << ((end) + 1 - (start))) - 1)
+
+static inline void s3c2443_irq_demux(unsigned int irq, unsigned int len)
+{
+ unsigned int subsrc, submsk;
+ unsigned int end;
+ struct irq_desc *mydesc;
+
+ /* read the current pending interrupts, and the mask
+ * for what it is available */
+
+ subsrc = __raw_readl(S3C2410_SUBSRCPND);
+ submsk = __raw_readl(S3C2410_INTSUBMSK);
+
+ subsrc &= ~submsk;
+ subsrc >>= (irq - S3C2410_IRQSUB(0));
+ subsrc &= (1 << len)-1;
+
+ end = len + irq;
+ mydesc = irq_desc + irq;
+
+ for (; irq < end && subsrc; irq++) {
+ if (subsrc & 1)
+ desc_handle_irq(irq, mydesc);
+
+ mydesc++;
+ subsrc >>= 1;
+ }
+}
+
+/* WDT/AC97 sub interrupts */
+
+static void s3c2443_irq_demux_wdtac97(unsigned int irq, struct irq_desc *desc)
+{
+ s3c2443_irq_demux(IRQ_S3C2443_WDT, 4);
+}
+
+#define INTMSK_WDTAC97 (1UL << (IRQ_WDT - IRQ_EINT0))
+#define SUBMSK_WDTAC97 INTMSK(IRQ_S3C2443_WDT, IRQ_S3C2443_AC97)
+
+static void s3c2443_irq_wdtac97_mask(unsigned int irqno)
+{
+ s3c_irqsub_mask(irqno, INTMSK_WDTAC97, SUBMSK_WDTAC97);
+}
+
+static void s3c2443_irq_wdtac97_unmask(unsigned int irqno)
+{
+ s3c_irqsub_unmask(irqno, INTMSK_WDTAC97);
+}
+
+static void s3c2443_irq_wdtac97_ack(unsigned int irqno)
+{
+ s3c_irqsub_maskack(irqno, INTMSK_WDTAC97, SUBMSK_WDTAC97);
+}
+
+static struct irq_chip s3c2443_irq_wdtac97 = {
+ .mask = s3c2443_irq_wdtac97_mask,
+ .unmask = s3c2443_irq_wdtac97_unmask,
+ .ack = s3c2443_irq_wdtac97_ack,
+};
+
+
+/* LCD sub interrupts */
+
+static void s3c2443_irq_demux_lcd(unsigned int irq, struct irq_desc *desc)
+{
+ s3c2443_irq_demux(IRQ_S3C2443_LCD1, 4);
+}
+
+#define INTMSK_LCD (1UL << (IRQ_LCD - IRQ_EINT0))
+#define SUBMSK_LCD INTMSK(IRQ_S3C2443_LCD1, IRQ_S3C2443_LCD4)
+
+static void s3c2443_irq_lcd_mask(unsigned int irqno)
+{
+ s3c_irqsub_mask(irqno, INTMSK_LCD, SUBMSK_LCD);
+}
+
+static void s3c2443_irq_lcd_unmask(unsigned int irqno)
+{
+ s3c_irqsub_unmask(irqno, INTMSK_LCD);
+}
+
+static void s3c2443_irq_lcd_ack(unsigned int irqno)
+{
+ s3c_irqsub_maskack(irqno, INTMSK_LCD, SUBMSK_LCD);
+}
+
+static struct irq_chip s3c2443_irq_lcd = {
+ .mask = s3c2443_irq_lcd_mask,
+ .unmask = s3c2443_irq_lcd_unmask,
+ .ack = s3c2443_irq_lcd_ack,
+};
+
+
+/* DMA sub interrupts */
+
+static void s3c2443_irq_demux_dma(unsigned int irq, struct irq_desc *desc)
+{
+ s3c2443_irq_demux(IRQ_S3C2443_DMA1, 6);
+}
+
+#define INTMSK_DMA (1UL << (IRQ_S3C2443_DMA - IRQ_EINT0))
+#define SUBMSK_DMA INTMSK(IRQ_S3C2443_DMA0, IRQ_S3C2443_DMA5)
+
+
+static void s3c2443_irq_dma_mask(unsigned int irqno)
+{
+ s3c_irqsub_mask(irqno, INTMSK_DMA, SUBMSK_DMA);
+}
+
+static void s3c2443_irq_dma_unmask(unsigned int irqno)
+{
+ s3c_irqsub_unmask(irqno, INTMSK_DMA);
+}
+
+static void s3c2443_irq_dma_ack(unsigned int irqno)
+{
+ s3c_irqsub_maskack(irqno, INTMSK_DMA, SUBMSK_DMA);
+}
+
+static struct irq_chip s3c2443_irq_dma = {
+ .mask = s3c2443_irq_dma_mask,
+ .unmask = s3c2443_irq_dma_unmask,
+ .ack = s3c2443_irq_dma_ack,
+};
+
+
+/* UART3 sub interrupts */
+
+static void s3c2443_irq_demux_uart3(unsigned int irq, struct irq_desc *desc)
+{
+ s3c2443_irq_demux(IRQ_S3C2443_UART3, 3);
+}
+
+#define INTMSK_UART3 (1UL << (IRQ_S3C2443_UART3 - IRQ_EINT0))
+#define SUBMSK_UART3 (0xf << (IRQ_S3C2443_RX3 - S3C2410_IRQSUB(0)))
+
+
+static void s3c2443_irq_uart3_mask(unsigned int irqno)
+{
+ s3c_irqsub_mask(irqno, INTMSK_UART3, SUBMSK_UART3);
+}
+
+static void s3c2443_irq_uart3_unmask(unsigned int irqno)
+{
+ s3c_irqsub_unmask(irqno, INTMSK_UART3);
+}
+
+static void s3c2443_irq_uart3_ack(unsigned int irqno)
+{
+ s3c_irqsub_maskack(irqno, INTMSK_UART3, SUBMSK_UART3);
+}
+
+static struct irq_chip s3c2443_irq_uart3 = {
+ .mask = s3c2443_irq_uart3_mask,
+ .unmask = s3c2443_irq_uart3_unmask,
+ .ack = s3c2443_irq_uart3_ack,
+};
+
+
+/* CAM sub interrupts */
+
+static void s3c2443_irq_demux_cam(unsigned int irq, struct irq_desc *desc)
+{
+ s3c2443_irq_demux(IRQ_S3C2440_CAM_C, 4);
+}
+
+#define INTMSK_CAM (1UL << (IRQ_CAM - IRQ_EINT0))
+#define SUBMSK_CAM INTMSK(IRQ_S3C2440_CAM_C, IRQ_S3C2440_CAM_P)
+
+static void s3c2443_irq_cam_mask(unsigned int irqno)
+{
+ s3c_irqsub_mask(irqno, INTMSK_CAM, SUBMSK_CAM);
+}
+
+static void s3c2443_irq_cam_unmask(unsigned int irqno)
+{
+ s3c_irqsub_unmask(irqno, INTMSK_CAM);
+}
+
+static void s3c2443_irq_cam_ack(unsigned int irqno)
+{
+ s3c_irqsub_maskack(irqno, INTMSK_CAM, SUBMSK_CAM);
+}
+
+static struct irq_chip s3c2443_irq_cam = {
+ .mask = s3c2443_irq_cam_mask,
+ .unmask = s3c2443_irq_cam_unmask,
+ .ack = s3c2443_irq_cam_ack,
+};
+
+/* IRQ initialisation code */
+
+static int __init s3c2443_add_sub(unsigned int base,
+ void (*demux)(unsigned int,
+ struct irq_desc *),
+ struct irq_chip *chip,
+ unsigned int start, unsigned int end)
+{
+ unsigned int irqno;
+
+ set_irq_chip(base, &s3c_irq_level_chip);
+ set_irq_handler(base, handle_level_irq);
+ set_irq_chained_handler(base, demux);
+
+ for (irqno = start; irqno <= end; irqno++) {
+ set_irq_chip(irqno, chip);
+ set_irq_handler(irqno, handle_level_irq);
+ set_irq_flags(irqno, IRQF_VALID);
+ }
+
+ return 0;
+}
+
+static int s3c2443_irq_add(struct sys_device *sysdev)
+{
+ printk("S3C2443: IRQ Support\n");
+
+ s3c2443_add_sub(IRQ_CAM, s3c2443_irq_demux_cam, &s3c2443_irq_cam,
+ IRQ_S3C2440_CAM_C, IRQ_S3C2440_CAM_P);
+
+ s3c2443_add_sub(IRQ_LCD, s3c2443_irq_demux_lcd, &s3c2443_irq_lcd,
+ IRQ_S3C2443_LCD1, IRQ_S3C2443_LCD4);
+
+ s3c2443_add_sub(IRQ_S3C2443_DMA, s3c2443_irq_demux_dma,
+ &s3c2443_irq_dma, IRQ_S3C2443_DMA0, IRQ_S3C2443_DMA5);
+
+ s3c2443_add_sub(IRQ_S3C2443_UART3, s3c2443_irq_demux_uart3,
+ &s3c2443_irq_uart3,
+ IRQ_S3C2443_RX3, IRQ_S3C2443_ERR3);
+
+ s3c2443_add_sub(IRQ_WDT, s3c2443_irq_demux_wdtac97,
+ &s3c2443_irq_wdtac97,
+ IRQ_S3C2443_WDT, IRQ_S3C2443_AC97);
+
+ return 0;
+}
+
+static struct sysdev_driver s3c2443_irq_driver = {
+ .add = s3c2443_irq_add,
+};
+
+static int s3c2443_irq_init(void)
+{
+ return sysdev_driver_register(&s3c2443_sysclass, &s3c2443_irq_driver);
+}
+
+arch_initcall(s3c2443_irq_init);
+
--- /dev/null
+/* linux/arch/arm/mach-s3c2443/mach-smdk2443.c
+ *
+ * Copyright (c) 2007 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * http://www.fluff.org/ben/smdk2443/
+ *
+ * Thanks to Samsung for the loan of an SMDK2443
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/hardware.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+#include <asm/arch/regs-serial.h>
+#include <asm/arch/regs-gpio.h>
+#include <asm/arch/regs-lcd.h>
+
+#include <asm/arch/idle.h>
+#include <asm/arch/fb.h>
+
+#include <asm/plat-s3c24xx/s3c2410.h>
+#include <asm/plat-s3c24xx/s3c2440.h>
+#include <asm/plat-s3c24xx/clock.h>
+#include <asm/plat-s3c24xx/devs.h>
+#include <asm/plat-s3c24xx/cpu.h>
+
+#include <asm/plat-s3c24xx/common-smdk.h>
+
+static struct map_desc smdk2443_iodesc[] __initdata = {
+ /* ISA IO Space map (memory space selected by A24) */
+
+ {
+ .virtual = (u32)S3C24XX_VA_ISA_WORD,
+ .pfn = __phys_to_pfn(S3C2410_CS2),
+ .length = 0x10000,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (u32)S3C24XX_VA_ISA_WORD + 0x10000,
+ .pfn = __phys_to_pfn(S3C2410_CS2 + (1<<24)),
+ .length = SZ_4M,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (u32)S3C24XX_VA_ISA_BYTE,
+ .pfn = __phys_to_pfn(S3C2410_CS2),
+ .length = 0x10000,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (u32)S3C24XX_VA_ISA_BYTE + 0x10000,
+ .pfn = __phys_to_pfn(S3C2410_CS2 + (1<<24)),
+ .length = SZ_4M,
+ .type = MT_DEVICE,
+ }
+};
+
+#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
+#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
+#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
+
+static struct s3c2410_uartcfg smdk2443_uartcfgs[] __initdata = {
+ [0] = {
+ .hwport = 0,
+ .flags = 0,
+ .ucon = 0x3c5,
+ .ulcon = 0x03,
+ .ufcon = 0x51,
+ },
+ [1] = {
+ .hwport = 1,
+ .flags = 0,
+ .ucon = 0x3c5,
+ .ulcon = 0x03,
+ .ufcon = 0x51,
+ },
+ /* IR port */
+ [2] = {
+ .hwport = 2,
+ .flags = 0,
+ .ucon = 0x3c5,
+ .ulcon = 0x43,
+ .ufcon = 0x51,
+ }
+};
+
+static struct platform_device *smdk2443_devices[] __initdata = {
+ &s3c_device_wdt,
+ &s3c_device_i2c,
+};
+
+static struct s3c24xx_board smdk2443_board __initdata = {
+ .devices = smdk2443_devices,
+ .devices_count = ARRAY_SIZE(smdk2443_devices)
+};
+
+static void __init smdk2443_map_io(void)
+{
+ s3c24xx_init_io(smdk2443_iodesc, ARRAY_SIZE(smdk2443_iodesc));
+ s3c24xx_init_clocks(12000000);
+ s3c24xx_init_uarts(smdk2443_uartcfgs, ARRAY_SIZE(smdk2443_uartcfgs));
+ s3c24xx_set_board(&smdk2443_board);
+}
+
+static void __init smdk2443_machine_init(void)
+{
+ smdk_machine_init();
+}
+
+MACHINE_START(SMDK2443, "SMDK2443")
+ /* Maintainer: Ben Dooks <ben@fluff.org> */
+ .phys_io = S3C2410_PA_UART,
+ .io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
+ .boot_params = S3C2410_SDRAM_PA + 0x100,
+
+ .init_irq = s3c24xx_init_irq,
+ .map_io = smdk2443_map_io,
+ .init_machine = smdk2443_machine_init,
+ .timer = &s3c24xx_timer,
+MACHINE_END
--- /dev/null
+/* linux/arch/arm/mach-s3c2443/s3c2443.c
+ *
+ * Copyright (c) 2007 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * Samsung S3C2443 Mobile CPU support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/serial_core.h>
+#include <linux/sysdev.h>
+#include <linux/clk.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/hardware.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+
+#include <asm/arch/regs-s3c2443-clock.h>
+#include <asm/arch/reset.h>
+
+#include <asm/plat-s3c24xx/s3c2443.h>
+#include <asm/plat-s3c24xx/devs.h>
+#include <asm/plat-s3c24xx/cpu.h>
+
+static struct map_desc s3c2443_iodesc[] __initdata = {
+ IODESC_ENT(WATCHDOG),
+ IODESC_ENT(CLKPWR),
+ IODESC_ENT(TIMER),
+};
+
+struct sysdev_class s3c2443_sysclass = {
+ set_kset_name("s3c2443-core"),
+};
+
+static struct sys_device s3c2443_sysdev = {
+ .cls = &s3c2443_sysclass,
+};
+
+static void s3c2443_hard_reset(void)
+{
+ __raw_writel(S3C2443_SWRST_RESET, S3C2443_SWRST);
+}
+
+int __init s3c2443_init(void)
+{
+ printk("S3C2443: Initialising architecture\n");
+
+ s3c24xx_reset_hook = s3c2443_hard_reset;
+
+ s3c_device_nand.name = "s3c2412-nand";
+
+ return sysdev_register(&s3c2443_sysdev);
+}
+
+void __init s3c2443_init_uarts(struct s3c2410_uartcfg *cfg, int no)
+{
+ s3c24xx_init_uartdevs("s3c2440-uart", s3c2410_uart_resources, cfg, no);
+}
+
+/* s3c2443_map_io
+ *
+ * register the standard cpu IO areas, and any passed in from the
+ * machine specific initialisation.
+ */
+
+void __init s3c2443_map_io(struct map_desc *mach_desc, int mach_size)
+{
+ iotable_init(s3c2443_iodesc, ARRAY_SIZE(s3c2443_iodesc));
+ iotable_init(mach_desc, mach_size);
+}
+
+/* need to register class before we actually register the device, and
+ * we also need to ensure that it has been initialised before any of the
+ * drivers even try to use it (even if not on an s3c2443 based system)
+ * as a driver which may support both 2443 and 2440 may try and use it.
+*/
+
+static int __init s3c2443_core_init(void)
+{
+ return sysdev_class_register(&s3c2443_sysclass);
+}
+
+core_initcall(s3c2443_core_init);
# ARM926T
config CPU_ARM926T
bool "Support ARM926T processor"
- depends on ARCH_INTEGRATOR || ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX || MACH_REALVIEW_EB || ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412 || ARCH_AT91SAM9260 || ARCH_AT91SAM9261
- default y if ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX || ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412 || ARCH_AT91SAM9260 || ARCH_AT91SAM9261
+ depends on ARCH_INTEGRATOR || ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX || MACH_REALVIEW_EB || ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412 || ARCH_AT91SAM9260 || ARCH_AT91SAM9261 || ARCH_AT91SAM9263 || ARCH_NS9XXX
+ default y if ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX || ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412 || ARCH_AT91SAM9260 || ARCH_AT91SAM9261 || ARCH_AT91SAM9263 || ARCH_NS9XXX
select CPU_32v5
select CPU_ABRT_EV5TJ
select CPU_CACHE_VIVT
Forget about fast user space cmpxchg support.
It is just not possible.
+config OUTER_CACHE
+ bool
+ default n
+
+config CACHE_L2X0
+ bool
+ select OUTER_CACHE
obj-$(CONFIG_CPU_XSCALE) += proc-xscale.o
obj-$(CONFIG_CPU_XSC3) += proc-xsc3.o
obj-$(CONFIG_CPU_V6) += proc-v6.o
+
+obj-$(CONFIG_CACHE_L2X0) += cache-l2x0.o
--- /dev/null
+/*
+ * arch/arm/mm/cache-l2x0.c - L210/L220 cache controller support
+ *
+ * Copyright (C) 2007 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#include <linux/init.h>
+
+#include <asm/cacheflush.h>
+#include <asm/io.h>
+#include <asm/hardware/cache-l2x0.h>
+
+#define CACHE_LINE_SIZE 32
+
+static void __iomem *l2x0_base;
+
+static inline void sync_writel(unsigned long val, unsigned long reg,
+ unsigned long complete_mask)
+{
+ writel(val, l2x0_base + reg);
+ /* wait for the operation to complete */
+ while (readl(l2x0_base + reg) & complete_mask)
+ ;
+}
+
+static inline void cache_sync(void)
+{
+ sync_writel(0, L2X0_CACHE_SYNC, 1);
+}
+
+static inline void l2x0_inv_all(void)
+{
+ /* invalidate all ways */
+ sync_writel(0xff, L2X0_INV_WAY, 0xff);
+ cache_sync();
+}
+
+static void l2x0_inv_range(unsigned long start, unsigned long end)
+{
+ unsigned long addr;
+
+ start &= ~(CACHE_LINE_SIZE - 1);
+ for (addr = start; addr < end; addr += CACHE_LINE_SIZE)
+ sync_writel(addr, L2X0_INV_LINE_PA, 1);
+ cache_sync();
+}
+
+static void l2x0_clean_range(unsigned long start, unsigned long end)
+{
+ unsigned long addr;
+
+ start &= ~(CACHE_LINE_SIZE - 1);
+ for (addr = start; addr < end; addr += CACHE_LINE_SIZE)
+ sync_writel(addr, L2X0_CLEAN_LINE_PA, 1);
+ cache_sync();
+}
+
+static void l2x0_flush_range(unsigned long start, unsigned long end)
+{
+ unsigned long addr;
+
+ start &= ~(CACHE_LINE_SIZE - 1);
+ for (addr = start; addr < end; addr += CACHE_LINE_SIZE)
+ sync_writel(addr, L2X0_CLEAN_INV_LINE_PA, 1);
+ cache_sync();
+}
+
+void __init l2x0_init(void __iomem *base, __u32 aux_val, __u32 aux_mask)
+{
+ __u32 aux;
+
+ l2x0_base = base;
+
+ /* disable L2X0 */
+ writel(0, l2x0_base + L2X0_CTRL);
+
+ aux = readl(l2x0_base + L2X0_AUX_CTRL);
+ aux &= aux_mask;
+ aux |= aux_val;
+ writel(aux, l2x0_base + L2X0_AUX_CTRL);
+
+ l2x0_inv_all();
+
+ /* enable L2X0 */
+ writel(1, l2x0_base + L2X0_CTRL);
+
+ outer_cache.inv_range = l2x0_inv_range;
+ outer_cache.clean_range = l2x0_clean_range;
+ outer_cache.flush_range = l2x0_flush_range;
+
+ printk(KERN_INFO "L2X0 cache controller enabled\n");
+}
* kernel direct-mapped region for device DMA.
*/
{
- unsigned long kaddr = (unsigned long)page_address(page);
- memset(page_address(page), 0, size);
- dmac_flush_range(kaddr, kaddr + size);
+ void *ptr = page_address(page);
+ memset(ptr, 0, size);
+ dmac_flush_range(ptr, ptr + size);
+ outer_flush_range(__pa(ptr), __pa(ptr) + size);
}
/*
* platforms with CONFIG_DMABOUNCE.
* Use the driver DMA support - see dma-mapping.h (dma_sync_*)
*/
-void consistent_sync(void *vaddr, size_t size, int direction)
+void consistent_sync(const void *start, size_t size, int direction)
{
- unsigned long start = (unsigned long)vaddr;
- unsigned long end = start + size;
+ const void *end = start + size;
+
+ BUG_ON(!virt_addr_valid(start) || !virt_addr_valid(end - 1));
switch (direction) {
case DMA_FROM_DEVICE: /* invalidate only */
dmac_inv_range(start, end);
+ outer_inv_range(__pa(start), __pa(end));
break;
case DMA_TO_DEVICE: /* writeback only */
dmac_clean_range(start, end);
+ outer_clean_range(__pa(start), __pa(end));
break;
case DMA_BIDIRECTIONAL: /* writeback and invalidate */
dmac_flush_range(start, end);
+ outer_flush_range(__pa(start), __pa(end));
break;
default:
BUG();
/*
* We fork()ed a process, and we need a new context for the child
* to run in. We reserve version 0 for initial tasks so we will
- * always allocate an ASID.
+ * always allocate an ASID. The ASID 0 is reserved for the TTBR
+ * register changing sequence.
*/
void __init_new_context(struct task_struct *tsk, struct mm_struct *mm)
{
* If we've used up all our ASIDs, we need
* to start a new version and flush the TLB.
*/
- if ((asid & ~ASID_MASK) == 0)
+ if ((asid & ~ASID_MASK) == 0) {
+ asid = ++cpu_last_asid;
+ /* set the reserved ASID before flushing the TLB */
+ asm("mcr p15, 0, %0, c13, c0, 1 @ set reserved context ID\n"
+ :
+ : "r" (0));
+ isb();
flush_tlb_all();
+ }
mm->context.id = asid;
}
flush_cache_page(vma, addr, pfn);
}
-void __flush_dcache_page(struct address_space *mapping, struct page *page);
-
/*
* Take care of architecture specific things when placing a new PTE into
* a page table, or changing an existing PTE. Basically, there are two
static unsigned int cachepolicy __initdata = CPOLICY_WRITEBACK;
static unsigned int ecc_mask __initdata = 0;
+pgprot_t pgprot_user;
pgprot_t pgprot_kernel;
+EXPORT_SYMBOL(pgprot_user);
EXPORT_SYMBOL(pgprot_kernel);
struct cachepolicy {
mem_types[MT_MINICLEAN].prot_sect &= ~PMD_SECT_TEX(1);
}
+ pgprot_user = __pgprot(L_PTE_PRESENT | L_PTE_YOUNG | user_pgprot);
pgprot_kernel = __pgprot(L_PTE_PRESENT | L_PTE_YOUNG |
L_PTE_DIRTY | L_PTE_WRITE |
L_PTE_EXEC | kern_pgprot);
#include <asm/assembler.h>
#include <asm/asm-offsets.h>
#include <asm/elf.h>
-#include <asm/hardware/arm_scu.h>
#include <asm/pgtable-hwdef.h>
#include <asm/pgtable.h>
+#ifdef CONFIG_SMP
+#include <asm/hardware/arm_scu.h>
+#endif
+
#include "proc-macros.S"
#define D_CACHE_LINE_SIZE 32
#define TTB_RGN_WT (2 << 3)
#define TTB_RGN_WB (3 << 3)
+#ifndef CONFIG_SMP
+#define TTB_FLAGS TTB_RGN_WBWA
+#else
+#define TTB_FLAGS TTB_RGN_WBWA|TTB_S
+#endif
+
ENTRY(cpu_v6_proc_init)
mov pc, lr
#ifdef CONFIG_MMU
mov r2, #0
ldr r1, [r1, #MM_CONTEXT_ID] @ get mm->context.id
-#ifdef CONFIG_SMP
- orr r0, r0, #TTB_RGN_WBWA|TTB_S @ mark PTWs shared, outer cacheable
-#endif
+ orr r0, r0, #TTB_FLAGS
mcr p15, 0, r2, c7, c5, 6 @ flush BTAC/BTB
mcr p15, 0, r2, c7, c10, 4 @ drain write buffer
mcr p15, 0, r0, c2, c0, 0 @ set TTB 0
/* Set up the SCU on core 0 only */
mrc p15, 0, r0, c0, c0, 5 @ CPU core number
ands r0, r0, #15
- moveq r0, #0x10000000 @ SCU_BASE
- orreq r0, r0, #0x00100000
+ ldreq r0, =SCU_BASE
ldreq r5, [r0, #SCU_CTRL]
orreq r5, r5, #1
streq r5, [r0, #SCU_CTRL]
#ifdef CONFIG_MMU
mcr p15, 0, r0, c8, c7, 0 @ invalidate I + D TLBs
mcr p15, 0, r0, c2, c0, 2 @ TTB control register
-#ifdef CONFIG_SMP
- orr r4, r4, #TTB_RGN_WBWA|TTB_S @ mark PTWs shared, outer cacheable
-#endif
+ orr r4, r4, #TTB_FLAGS
mcr p15, 0, r4, c2, c0, 1 @ load TTB1
#endif /* CONFIG_MMU */
adr r5, v6_crval
* Current Maintainer: Lennert Buytenhek <buytenh@wantstofly.org>
*
* Copyright 2004 (C) Intel Corp.
- * Copyright 2005 (c) MontaVista Software, Inc.
+ * Copyright 2005 (C) MontaVista Software, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
- * MMU functions for the Intel XScale3 Core (XSC3). The XSC3 core is an
- * extension to Intel's original XScale core that adds the following
+ * MMU functions for the Intel XScale3 Core (XSC3). The XSC3 core is
+ * an extension to Intel's original XScale core that adds the following
* features:
*
* - ARMv6 Supersections
* - Low Locality Reference pages (replaces mini-cache)
* - 36-bit addressing
* - L2 cache
- * - Cache-coherency if chipset supports it
+ * - Cache coherency if chipset supports it
*
- * Based on orignal XScale code by Nicolas Pitre
+ * Based on original XScale code by Nicolas Pitre.
*/
#include <linux/linkage.h>
#define MAX_AREA_SIZE 32768
/*
- * The cache line size of the I and D cache.
+ * The cache line size of the L1 I, L1 D and unified L2 cache.
*/
#define CACHELINESIZE 32
/*
- * The size of the data cache.
+ * The size of the L1 D cache.
*/
#define CACHESIZE 32768
#define L2_CACHE_ENABLE 1
/*
- * This macro is used to wait for a CP15 write and is needed
- * when we have to ensure that the last operation to the co-pro
- * was completed before continuing with operation.
+ * This macro is used to wait for a CP15 write and is needed when we
+ * have to ensure that the last operation to the coprocessor was
+ * completed before continuing with operation.
*/
.macro cpwait_ret, lr, rd
mrc p15, 0, \rd, c2, c0, 0 @ arbitrary read of cp15
.endm
/*
- * This macro cleans & invalidates the entire xsc3 dcache by set & way.
+ * This macro cleans and invalidates the entire L1 D cache.
*/
.macro clean_d_cache rd, rs
mov \rd, #0x1f00
orr \rd, \rd, #0x00e0
-1: mcr p15, 0, \rd, c7, c14, 2 @ clean/inv set/way
+1: mcr p15, 0, \rd, c7, c14, 2 @ clean/invalidate L1 D line
adds \rd, \rd, #0x40000000
bcc 1b
subs \rd, \rd, #0x20
mov r1, #PSR_F_BIT|PSR_I_BIT|SVC_MODE
msr cpsr_c, r1 @ reset CPSR
mrc p15, 0, r1, c1, c0, 0 @ ctrl register
- bic r1, r1, #0x0086 @ ........B....CA.
bic r1, r1, #0x3900 @ ..VIZ..S........
+ bic r1, r1, #0x0086 @ ........B....CA.
mcr p15, 0, r1, c1, c0, 0 @ ctrl register
- mcr p15, 0, ip, c7, c7, 0 @ invalidate I,D caches & BTB
+ mcr p15, 0, ip, c7, c7, 0 @ invalidate L1 caches and BTB
bic r1, r1, #0x0001 @ ...............M
mcr p15, 0, r1, c1, c0, 0 @ ctrl register
@ CAUTION: MMU turned off from this point. We count on the pipeline
@ already containing those two last instructions to survive.
- mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs
+ mcr p15, 0, ip, c8, c7, 0 @ invalidate I and D TLBs
mov pc, r0
/*
*
* XScale supports clock switching, but using idle mode support
* allows external hardware to react to system state changes.
-
- MMG: Come back to this one.
*/
.align 5
ENTRY(cpu_xsc3_do_idle)
mov r0, #1
- mcr p14, 0, r0, c7, c0, 0 @ Go to IDLE
+ mcr p14, 0, r0, c7, c0, 0 @ go to idle
mov pc, lr
/* ================================= CACHE ================================ */
__flush_whole_cache:
clean_d_cache r0, r1
tst r2, #VM_EXEC
- mcrne p15, 0, ip, c7, c5, 0 @ Invalidate I cache & BTB
- mcrne p15, 0, ip, c7, c10, 4 @ Drain Write Buffer
- mcrne p15, 0, ip, c7, c5, 4 @ Prefetch Flush
+ mcrne p15, 0, ip, c7, c5, 0 @ invalidate L1 I cache and BTB
+ mcrne p15, 0, ip, c7, c10, 4 @ data write barrier
+ mcrne p15, 0, ip, c7, c5, 4 @ prefetch flush
mov pc, lr
/*
bhs __flush_whole_cache
1: tst r2, #VM_EXEC
- mcrne p15, 0, r0, c7, c5, 1 @ Invalidate I cache line
- mcr p15, 0, r0, c7, c14, 1 @ Clean/invalidate D cache line
+ mcrne p15, 0, r0, c7, c5, 1 @ invalidate L1 I line
+ mcr p15, 0, r0, c7, c14, 1 @ clean/invalidate L1 D line
add r0, r0, #CACHELINESIZE
cmp r0, r1
blo 1b
tst r2, #VM_EXEC
- mcrne p15, 0, ip, c7, c5, 6 @ Invalidate BTB
- mcrne p15, 0, ip, c7, c10, 4 @ Drain Write Buffer
- mcrne p15, 0, ip, c7, c5, 4 @ Prefetch Flush
+ mcrne p15, 0, ip, c7, c5, 6 @ invalidate BTB
+ mcrne p15, 0, ip, c7, c10, 4 @ data write barrier
+ mcrne p15, 0, ip, c7, c5, 4 @ prefetch flush
mov pc, lr
/*
* coherent_kern_range(start, end)
*
- * Ensure coherency between the Icache and the Dcache in the
+ * Ensure coherency between the I cache and the D cache in the
* region described by start. If you have non-snooping
* Harvard caches, you need to implement this function.
*
/* FALLTHROUGH */
ENTRY(xsc3_coherent_user_range)
bic r0, r0, #CACHELINESIZE - 1
-1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
+1: mcr p15, 0, r0, c7, c10, 1 @ clean L1 D line
add r0, r0, #CACHELINESIZE
cmp r0, r1
blo 1b
mov r0, #0
- mcr p15, 0, r0, c7, c5, 0 @ Invalidate I cache & BTB
- mcr p15, 0, r0, c7, c10, 4 @ Drain Write Buffer
- mcr p15, 0, r0, c7, c5, 4 @ Prefetch Flush
+ mcr p15, 0, r0, c7, c5, 0 @ invalidate L1 I cache and BTB
+ mcr p15, 0, r0, c7, c10, 4 @ data write barrier
+ mcr p15, 0, r0, c7, c5, 4 @ prefetch flush
mov pc, lr
/*
* flush_kern_dcache_page(void *page)
*
* Ensure no D cache aliasing occurs, either with itself or
- * the I cache
+ * the I cache.
*
* - addr - page aligned address
*/
ENTRY(xsc3_flush_kern_dcache_page)
add r1, r0, #PAGE_SZ
-1: mcr p15, 0, r0, c7, c14, 1 @ Clean/Invalidate D Cache line
+1: mcr p15, 0, r0, c7, c14, 1 @ clean/invalidate L1 D line
add r0, r0, #CACHELINESIZE
cmp r0, r1
blo 1b
mov r0, #0
- mcr p15, 0, r0, c7, c5, 0 @ Invalidate I cache & BTB
- mcr p15, 0, r0, c7, c10, 4 @ Drain Write Buffer
- mcr p15, 0, r0, c7, c5, 4 @ Prefetch Flush
+ mcr p15, 0, r0, c7, c5, 0 @ invalidate L1 I cache and BTB
+ mcr p15, 0, r0, c7, c10, 4 @ data write barrier
+ mcr p15, 0, r0, c7, c5, 4 @ prefetch flush
mov pc, lr
/*
ENTRY(xsc3_dma_inv_range)
tst r0, #CACHELINESIZE - 1
bic r0, r0, #CACHELINESIZE - 1
- mcrne p15, 0, r0, c7, c10, 1 @ clean L1 D entry
- mcrne p15, 1, r0, c7, c11, 1 @ clean L2 D entry
+ mcrne p15, 0, r0, c7, c10, 1 @ clean L1 D line
+ mcrne p15, 1, r0, c7, c11, 1 @ clean L2 line
tst r1, #CACHELINESIZE - 1
- mcrne p15, 0, r1, c7, c10, 1 @ clean L1 D entry
- mcrne p15, 1, r1, c7, c11, 1 @ clean L2 D entry
-1: mcr p15, 0, r0, c7, c6, 1 @ invalidate L1 D entry
- mcr p15, 1, r0, c7, c7, 1 @ Invalidate L2 D cache line
+ mcrne p15, 0, r1, c7, c10, 1 @ clean L1 D line
+ mcrne p15, 1, r1, c7, c11, 1 @ clean L2 line
+1: mcr p15, 0, r0, c7, c6, 1 @ invalidate L1 D line
+ mcr p15, 1, r0, c7, c7, 1 @ invalidate L2 line
add r0, r0, #CACHELINESIZE
cmp r0, r1
blo 1b
- mcr p15, 0, r0, c7, c10, 4 @ Drain Write Buffer
+ mcr p15, 0, r0, c7, c10, 4 @ data write barrier
mov pc, lr
/*
*/
ENTRY(xsc3_dma_clean_range)
bic r0, r0, #CACHELINESIZE - 1
-1: mcr p15, 0, r0, c7, c10, 1 @ clean L1 D entry
- mcr p15, 1, r0, c7, c11, 1 @ clean L2 D entry
+1: mcr p15, 0, r0, c7, c10, 1 @ clean L1 D line
+ mcr p15, 1, r0, c7, c11, 1 @ clean L2 line
add r0, r0, #CACHELINESIZE
cmp r0, r1
blo 1b
- mcr p15, 0, r0, c7, c10, 4 @ Drain Write Buffer
+ mcr p15, 0, r0, c7, c10, 4 @ data write barrier
mov pc, lr
/*
*/
ENTRY(xsc3_dma_flush_range)
bic r0, r0, #CACHELINESIZE - 1
-1: mcr p15, 0, r0, c7, c14, 1 @ Clean/invalidate L1 D cache line
- mcr p15, 1, r0, c7, c11, 1 @ Clean L2 D cache line
- mcr p15, 1, r0, c7, c7, 1 @ Invalidate L2 D cache line
+1: mcr p15, 0, r0, c7, c14, 1 @ clean/invalidate L1 D line
+ mcr p15, 1, r0, c7, c11, 1 @ clean L2 line
+ mcr p15, 1, r0, c7, c7, 1 @ invalidate L2 line
add r0, r0, #CACHELINESIZE
cmp r0, r1
blo 1b
- mcr p15, 0, r0, c7, c10, 4 @ Drain Write Buffer
+ mcr p15, 0, r0, c7, c10, 4 @ data write barrier
mov pc, lr
ENTRY(xsc3_cache_fns)
.long xsc3_dma_flush_range
ENTRY(cpu_xsc3_dcache_clean_area)
-1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
+1: mcr p15, 0, r0, c7, c10, 1 @ clean L1 D line
add r0, r0, #CACHELINESIZE
subs r1, r1, #CACHELINESIZE
bhi 1b
.align 5
ENTRY(cpu_xsc3_switch_mm)
clean_d_cache r1, r2
- mcr p15, 0, ip, c7, c5, 0 @ Invalidate I cache & BTB
- mcr p15, 0, ip, c7, c10, 4 @ Drain Write Buffer
- mcr p15, 0, ip, c7, c5, 4 @ Prefetch Flush
+ mcr p15, 0, ip, c7, c5, 0 @ invalidate L1 I cache and BTB
+ mcr p15, 0, ip, c7, c10, 4 @ data write barrier
+ mcr p15, 0, ip, c7, c5, 4 @ prefetch flush
#ifdef L2_CACHE_ENABLE
orr r0, r0, #0x18 @ cache the page table in L2
#endif
mcr p15, 0, r0, c2, c0, 0 @ load page table pointer
- mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs
+ mcr p15, 0, ip, c8, c7, 0 @ invalidate I and D TLBs
cpwait_ret lr, ip
/*
ENTRY(cpu_xsc3_set_pte_ext)
str r1, [r0], #-2048 @ linux version
- bic r2, r1, #0xff0 @ Keep C, B bits
+ bic r2, r1, #0xff0 @ keep C, B bits
orr r2, r2, #PTE_TYPE_EXT @ extended page
- tst r1, #L_PTE_SHARED @ Shared?
+ tst r1, #L_PTE_SHARED @ shared?
orrne r2, r2, #0x200
eor r3, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_WRITE | L_PTE_DIRTY
- tst r3, #L_PTE_USER @ User?
+ tst r3, #L_PTE_USER @ user?
orrne r2, r2, #PTE_EXT_AP_URO_SRW @ yes -> user r/o, system r/w
- tst r3, #L_PTE_WRITE | L_PTE_DIRTY @ Write and Dirty?
+ tst r3, #L_PTE_WRITE | L_PTE_DIRTY @ write and dirty?
orreq r2, r2, #PTE_EXT_AP_UNO_SRW @ yes -> user n/a, system r/w
@ combined with user -> user r/w
#if L2_CACHE_ENABLE
- @ If its cacheable it needs to be in L2 also.
+ @ If it's cacheable, it needs to be in L2 also.
eor ip, r1, #L_PTE_CACHEABLE
tst ip, #L_PTE_CACHEABLE
orreq r2, r2, #PTE_EXT_TEX(0x5)
#endif
- tst r3, #L_PTE_PRESENT | L_PTE_YOUNG @ Present and Young?
+ tst r3, #L_PTE_PRESENT | L_PTE_YOUNG @ present and young?
movne r2, #0 @ no -> fault
str r2, [r0] @ hardware version
mov ip, #0
- mcr p15, 0, r0, c7, c10, 1 @ Clean D cache line mcr
- mcr p15, 0, ip, c7, c10, 4 @ Drain Write Buffer
+ mcr p15, 0, r0, c7, c10, 1 @ clean L1 D line
+ mcr p15, 0, ip, c7, c10, 4 @ data write barrier
mov pc, lr
.ltorg
__xsc3_setup:
mov r0, #PSR_F_BIT|PSR_I_BIT|SVC_MODE
msr cpsr_c, r0
- mcr p15, 0, ip, c7, c7, 0 @ invalidate I, D caches & BTB
- mcr p15, 0, ip, c7, c10, 4 @ Drain Write Buffer
- mcr p15, 0, ip, c7, c5, 4 @ Prefetch Flush
- mcr p15, 0, ip, c8, c7, 0 @ invalidate I, D TLBs
+ mcr p15, 0, ip, c7, c7, 0 @ invalidate L1 caches and BTB
+ mcr p15, 0, ip, c7, c10, 4 @ data write barrier
+ mcr p15, 0, ip, c7, c5, 4 @ prefetch flush
+ mcr p15, 0, ip, c8, c7, 0 @ invalidate I and D TLBs
#if L2_CACHE_ENABLE
orr r4, r4, #0x18 @ cache the page table in L2
#endif
mcr p15, 0, r4, c2, c0, 0 @ load page table pointer
- mov r0, #1 @ Allow access to CP0 and CP13
- orr r0, r0, #1 << 13 @ Its undefined whether this
- mcr p15, 0, r0, c15, c1, 0 @ affects USR or SVC modes
+
+ mov r0, #0 @ don't allow CP access
+ mcr p15, 0, r0, c15, c1, 0 @ write CP access register
+
mrc p15, 0, r0, c1, c0, 1 @ get auxiliary control reg
and r0, r0, #2 @ preserve bit P bit setting
#if L2_CACHE_ENABLE
adr r5, xsc3_crval
ldmia r5, {r5, r6}
mrc p15, 0, r0, c1, c0, 0 @ get control register
- bic r0, r0, r5 @ .... .... .... ..A.
- orr r0, r0, r6 @ .... .... .... .C.M
- orr r0, r0, #0x00000800 @ ..VI Z..S .... ....
+ bic r0, r0, r5 @ ..V. ..R. .... ..A.
+ orr r0, r0, r6 @ ..VI Z..S .... .C.M (mmu)
+ @ ...I Z..S .... .... (uc)
#if L2_CACHE_ENABLE
orr r0, r0, #0x04000000 @ L2 enable
#endif
.type xsc3_crval, #object
xsc3_crval:
- crval clear=0x04003b02, mmuset=0x00003105, ucset=0x00001100
+ crval clear=0x04002202, mmuset=0x00003905, ucset=0x00001900
__INITDATA
.type cpu_xsc3_name, #object
cpu_xsc3_name:
- .asciz "XScale-Core3"
+ .asciz "XScale-V3 based processor"
.size cpu_xsc3_name, . - cpu_xsc3_name
.align
PMD_SECT_CACHEABLE | \
PMD_SECT_AP_WRITE | \
PMD_SECT_AP_READ
- .long PMD_TYPE_SECT | \
+ .long PMD_TYPE_SECT | \
PMD_SECT_AP_WRITE | \
PMD_SECT_AP_READ
b __xsc3_setup
add r0, r0, #PAGE_SZ
cmp r0, r1
blo 1b
+ mcr p15, 0, ip, c7, c5, 6 @ flush BTAC/BTB
+ mcr p15, 0, ip, c7, c10, 4 @ data synchronization barrier
mov pc, lr
/*
add r0, r0, #PAGE_SZ
cmp r0, r1
blo 1b
+ mcr p15, 0, r2, c7, c5, 6 @ flush BTAC/BTB
mcr p15, 0, r2, c7, c10, 4 @ data synchronization barrier
+ mcr p15, 0, r2, c7, c5, 4 @ prefetch flush
mov pc, lr
.section ".text.init", #alloc, #execinstr
If unsure, say N.
+if OPROFILE
+
+config OPROFILE_ARMV6
+ bool
+ depends on CPU_V6 && !SMP
+ default y
+ select OPROFILE_ARM11_CORE
+
+config OPROFILE_MPCORE
+ bool
+ depends on CPU_V6 && SMP
+ default y
+ select OPROFILE_ARM11_CORE
+
+config OPROFILE_ARM11_CORE
+ bool
+
+endif
+
endmenu
oprofile-y := $(DRIVER_OBJS) common.o backtrace.o
oprofile-$(CONFIG_CPU_XSCALE) += op_model_xscale.o
-
+oprofile-$(CONFIG_OPROFILE_ARM11_CORE) += op_model_arm11_core.o
+oprofile-$(CONFIG_OPROFILE_ARMV6) += op_model_v6.o
+oprofile-$(CONFIG_OPROFILE_MPCORE) += op_model_mpcore.o
spec = &op_xscale_spec;
#endif
+#ifdef CONFIG_OPROFILE_ARMV6
+ spec = &op_armv6_spec;
+#endif
+
+#ifdef CONFIG_OPROFILE_MPCORE
+ spec = &op_mpcore_spec;
+#endif
+
if (spec) {
ret = spec->init();
if (ret < 0)
extern struct op_arm_model_spec op_xscale_spec;
#endif
+extern struct op_arm_model_spec op_armv6_spec;
+extern struct op_arm_model_spec op_mpcore_spec;
+
extern void arm_backtrace(struct pt_regs * const regs, unsigned int depth);
extern int __init op_arm_init(struct oprofile_operations *ops, struct op_arm_model_spec *spec);
--- /dev/null
+/**
+ * @file op_model_arm11_core.c
+ * ARM11 Event Monitor Driver
+ * @remark Copyright 2004 ARM SMP Development Team
+ */
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/oprofile.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/smp.h>
+
+#include "op_counter.h"
+#include "op_arm_model.h"
+#include "op_model_arm11_core.h"
+
+/*
+ * ARM11 PMU support
+ */
+static inline void arm11_write_pmnc(u32 val)
+{
+ /* upper 4bits and 7, 11 are write-as-0 */
+ val &= 0x0ffff77f;
+ asm volatile("mcr p15, 0, %0, c15, c12, 0" : : "r" (val));
+}
+
+static inline u32 arm11_read_pmnc(void)
+{
+ u32 val;
+ asm volatile("mrc p15, 0, %0, c15, c12, 0" : "=r" (val));
+ return val;
+}
+
+static void arm11_reset_counter(unsigned int cnt)
+{
+ u32 val = -(u32)counter_config[CPU_COUNTER(smp_processor_id(), cnt)].count;
+ switch (cnt) {
+ case CCNT:
+ asm volatile("mcr p15, 0, %0, c15, c12, 1" : : "r" (val));
+ break;
+
+ case PMN0:
+ asm volatile("mcr p15, 0, %0, c15, c12, 2" : : "r" (val));
+ break;
+
+ case PMN1:
+ asm volatile("mcr p15, 0, %0, c15, c12, 3" : : "r" (val));
+ break;
+ }
+}
+
+int arm11_setup_pmu(void)
+{
+ unsigned int cnt;
+ u32 pmnc;
+
+ if (arm11_read_pmnc() & PMCR_E) {
+ printk(KERN_ERR "oprofile: CPU%u PMU still enabled when setup new event counter.\n", smp_processor_id());
+ return -EBUSY;
+ }
+
+ /* initialize PMNC, reset overflow, D bit, C bit and P bit. */
+ arm11_write_pmnc(PMCR_OFL_PMN0 | PMCR_OFL_PMN1 | PMCR_OFL_CCNT |
+ PMCR_C | PMCR_P);
+
+ for (pmnc = 0, cnt = PMN0; cnt <= CCNT; cnt++) {
+ unsigned long event;
+
+ if (!counter_config[CPU_COUNTER(smp_processor_id(), cnt)].enabled)
+ continue;
+
+ event = counter_config[CPU_COUNTER(smp_processor_id(), cnt)].event & 255;
+
+ /*
+ * Set event (if destined for PMNx counters)
+ */
+ if (cnt == PMN0) {
+ pmnc |= event << 20;
+ } else if (cnt == PMN1) {
+ pmnc |= event << 12;
+ }
+
+ /*
+ * We don't need to set the event if it's a cycle count
+ * Enable interrupt for this counter
+ */
+ pmnc |= PMCR_IEN_PMN0 << cnt;
+ arm11_reset_counter(cnt);
+ }
+ arm11_write_pmnc(pmnc);
+
+ return 0;
+}
+
+int arm11_start_pmu(void)
+{
+ arm11_write_pmnc(arm11_read_pmnc() | PMCR_E);
+ return 0;
+}
+
+int arm11_stop_pmu(void)
+{
+ unsigned int cnt;
+
+ arm11_write_pmnc(arm11_read_pmnc() & ~PMCR_E);
+
+ for (cnt = PMN0; cnt <= CCNT; cnt++)
+ arm11_reset_counter(cnt);
+
+ return 0;
+}
+
+/*
+ * CPU counters' IRQ handler (one IRQ per CPU)
+ */
+static irqreturn_t arm11_pmu_interrupt(int irq, void *arg)
+{
+ struct pt_regs *regs = get_irq_regs();
+ unsigned int cnt;
+ u32 pmnc;
+
+ pmnc = arm11_read_pmnc();
+
+ for (cnt = PMN0; cnt <= CCNT; cnt++) {
+ if ((pmnc & (PMCR_OFL_PMN0 << cnt)) && (pmnc & (PMCR_IEN_PMN0 << cnt))) {
+ arm11_reset_counter(cnt);
+ oprofile_add_sample(regs, CPU_COUNTER(smp_processor_id(), cnt));
+ }
+ }
+ /* Clear counter flag(s) */
+ arm11_write_pmnc(pmnc);
+ return IRQ_HANDLED;
+}
+
+int arm11_request_interrupts(int *irqs, int nr)
+{
+ unsigned int i;
+ int ret = 0;
+
+ for(i = 0; i < nr; i++) {
+ ret = request_irq(irqs[i], arm11_pmu_interrupt, IRQF_DISABLED, "CP15 PMU", NULL);
+ if (ret != 0) {
+ printk(KERN_ERR "oprofile: unable to request IRQ%u for MPCORE-EM\n",
+ irqs[i]);
+ break;
+ }
+ }
+
+ if (i != nr)
+ while (i-- != 0)
+ free_irq(irqs[i], NULL);
+
+ return ret;
+}
+
+void arm11_release_interrupts(int *irqs, int nr)
+{
+ unsigned int i;
+
+ for (i = 0; i < nr; i++)
+ free_irq(irqs[i], NULL);
+}
--- /dev/null
+/**
+ * @file op_model_arm11_core.h
+ * ARM11 Event Monitor Driver
+ * @remark Copyright 2004 ARM SMP Development Team
+ * @remark Copyright 2000-2004 Deepak Saxena <dsaxena@mvista.com>
+ * @remark Copyright 2000-2004 MontaVista Software Inc
+ * @remark Copyright 2004 Dave Jiang <dave.jiang@intel.com>
+ * @remark Copyright 2004 Intel Corporation
+ * @remark Copyright 2004 Zwane Mwaikambo <zwane@arm.linux.org.uk>
+ * @remark Copyright 2004 Oprofile Authors
+ *
+ * @remark Read the file COPYING
+ *
+ * @author Zwane Mwaikambo
+ */
+#ifndef OP_MODEL_ARM11_CORE_H
+#define OP_MODEL_ARM11_CORE_H
+
+/*
+ * Per-CPU PMCR
+ */
+#define PMCR_E (1 << 0) /* Enable */
+#define PMCR_P (1 << 1) /* Count reset */
+#define PMCR_C (1 << 2) /* Cycle counter reset */
+#define PMCR_D (1 << 3) /* Cycle counter counts every 64th cpu cycle */
+#define PMCR_IEN_PMN0 (1 << 4) /* Interrupt enable count reg 0 */
+#define PMCR_IEN_PMN1 (1 << 5) /* Interrupt enable count reg 1 */
+#define PMCR_IEN_CCNT (1 << 6) /* Interrupt enable cycle counter */
+#define PMCR_OFL_PMN0 (1 << 8) /* Count reg 0 overflow */
+#define PMCR_OFL_PMN1 (1 << 9) /* Count reg 1 overflow */
+#define PMCR_OFL_CCNT (1 << 10) /* Cycle counter overflow */
+
+#define PMN0 0
+#define PMN1 1
+#define CCNT 2
+
+#define CPU_COUNTER(cpu, counter) ((cpu) * 3 + (counter))
+
+int arm11_setup_pmu(void);
+int arm11_start_pmu(void);
+int arm11_stop_pmu(void);
+int arm11_request_interrupts(int *, int);
+void arm11_release_interrupts(int *, int);
+
+#endif
--- /dev/null
+/**
+ * @file op_model_mpcore.c
+ * MPCORE Event Monitor Driver
+ * @remark Copyright 2004 ARM SMP Development Team
+ * @remark Copyright 2000-2004 Deepak Saxena <dsaxena@mvista.com>
+ * @remark Copyright 2000-2004 MontaVista Software Inc
+ * @remark Copyright 2004 Dave Jiang <dave.jiang@intel.com>
+ * @remark Copyright 2004 Intel Corporation
+ * @remark Copyright 2004 Zwane Mwaikambo <zwane@arm.linux.org.uk>
+ * @remark Copyright 2004 Oprofile Authors
+ *
+ * @remark Read the file COPYING
+ *
+ * @author Zwane Mwaikambo
+ *
+ * Counters:
+ * 0: PMN0 on CPU0, per-cpu configurable event counter
+ * 1: PMN1 on CPU0, per-cpu configurable event counter
+ * 2: CCNT on CPU0
+ * 3: PMN0 on CPU1
+ * 4: PMN1 on CPU1
+ * 5: CCNT on CPU1
+ * 6: PMN0 on CPU1
+ * 7: PMN1 on CPU1
+ * 8: CCNT on CPU1
+ * 9: PMN0 on CPU1
+ * 10: PMN1 on CPU1
+ * 11: CCNT on CPU1
+ * 12-19: configurable SCU event counters
+ */
+
+/* #define DEBUG */
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/oprofile.h>
+#include <linux/interrupt.h>
+#include <linux/smp.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/mach/irq.h>
+#include <asm/hardware.h>
+#include <asm/system.h>
+
+#include "op_counter.h"
+#include "op_arm_model.h"
+#include "op_model_arm11_core.h"
+#include "op_model_mpcore.h"
+
+/*
+ * MPCore SCU event monitor support
+ */
+#define SCU_EVENTMONITORS_VA_BASE __io_address(REALVIEW_MPCORE_SCU_BASE + 0x10)
+
+/*
+ * Bitmask of used SCU counters
+ */
+static unsigned int scu_em_used;
+
+/*
+ * 2 helper fns take a counter number from 0-7 (not the userspace-visible counter number)
+ */
+static inline void scu_reset_counter(struct eventmonitor __iomem *emc, unsigned int n)
+{
+ writel(-(u32)counter_config[SCU_COUNTER(n)].count, &emc->MC[n]);
+}
+
+static inline void scu_set_event(struct eventmonitor __iomem *emc, unsigned int n, u32 event)
+{
+ event &= 0xff;
+ writeb(event, &emc->MCEB[n]);
+}
+
+/*
+ * SCU counters' IRQ handler (one IRQ per counter => 2 IRQs per CPU)
+ */
+static irqreturn_t scu_em_interrupt(int irq, void *arg)
+{
+ struct eventmonitor __iomem *emc = SCU_EVENTMONITORS_VA_BASE;
+ unsigned int cnt;
+
+ cnt = irq - IRQ_PMU_SCU0;
+ oprofile_add_sample(get_irq_regs(), SCU_COUNTER(cnt));
+ scu_reset_counter(emc, cnt);
+
+ /* Clear overflow flag for this counter */
+ writel(1 << (cnt + 16), &emc->PMCR);
+
+ return IRQ_HANDLED;
+}
+
+/* Configure just the SCU counters that the user has requested */
+static void scu_setup(void)
+{
+ struct eventmonitor __iomem *emc = SCU_EVENTMONITORS_VA_BASE;
+ unsigned int i;
+
+ scu_em_used = 0;
+
+ for (i = 0; i < NUM_SCU_COUNTERS; i++) {
+ if (counter_config[SCU_COUNTER(i)].enabled &&
+ counter_config[SCU_COUNTER(i)].event) {
+ scu_set_event(emc, i, 0); /* disable counter for now */
+ scu_em_used |= 1 << i;
+ }
+ }
+}
+
+static int scu_start(void)
+{
+ struct eventmonitor __iomem *emc = SCU_EVENTMONITORS_VA_BASE;
+ unsigned int temp, i;
+ unsigned long event;
+ int ret = 0;
+
+ /*
+ * request the SCU counter interrupts that we need
+ */
+ for (i = 0; i < NUM_SCU_COUNTERS; i++) {
+ if (scu_em_used & (1 << i)) {
+ ret = request_irq(IRQ_PMU_SCU0 + i, scu_em_interrupt, IRQF_DISABLED, "SCU PMU", NULL);
+ if (ret) {
+ printk(KERN_ERR "oprofile: unable to request IRQ%u for SCU Event Monitor\n",
+ IRQ_PMU_SCU0 + i);
+ goto err_free_scu;
+ }
+ }
+ }
+
+ /*
+ * clear overflow and enable interrupt for all used counters
+ */
+ temp = readl(&emc->PMCR);
+ for (i = 0; i < NUM_SCU_COUNTERS; i++) {
+ if (scu_em_used & (1 << i)) {
+ scu_reset_counter(emc, i);
+ event = counter_config[SCU_COUNTER(i)].event;
+ scu_set_event(emc, i, event);
+
+ /* clear overflow/interrupt */
+ temp |= 1 << (i + 16);
+ /* enable interrupt*/
+ temp |= 1 << (i + 8);
+ }
+ }
+
+ /* Enable all 8 counters */
+ temp |= PMCR_E;
+ writel(temp, &emc->PMCR);
+
+ return 0;
+
+ err_free_scu:
+ while (i--)
+ free_irq(IRQ_PMU_SCU0 + i, NULL);
+ return ret;
+}
+
+static void scu_stop(void)
+{
+ struct eventmonitor __iomem *emc = SCU_EVENTMONITORS_VA_BASE;
+ unsigned int temp, i;
+
+ /* Disable counter interrupts */
+ /* Don't disable all 8 counters (with the E bit) as they may be in use */
+ temp = readl(&emc->PMCR);
+ for (i = 0; i < NUM_SCU_COUNTERS; i++) {
+ if (scu_em_used & (1 << i))
+ temp &= ~(1 << (i + 8));
+ }
+ writel(temp, &emc->PMCR);
+
+ /* Free counter interrupts and reset counters */
+ for (i = 0; i < NUM_SCU_COUNTERS; i++) {
+ if (scu_em_used & (1 << i)) {
+ scu_reset_counter(emc, i);
+ free_irq(IRQ_PMU_SCU0 + i, NULL);
+ }
+ }
+}
+
+struct em_function_data {
+ int (*fn)(void);
+ int ret;
+};
+
+static void em_func(void *data)
+{
+ struct em_function_data *d = data;
+ int ret = d->fn();
+ if (ret)
+ d->ret = ret;
+}
+
+static int em_call_function(int (*fn)(void))
+{
+ struct em_function_data data;
+
+ data.fn = fn;
+ data.ret = 0;
+
+ smp_call_function(em_func, &data, 1, 1);
+ em_func(&data);
+
+ return data.ret;
+}
+
+/*
+ * Glue to stick the individual ARM11 PMUs and the SCU
+ * into the oprofile framework.
+ */
+static int em_setup_ctrs(void)
+{
+ int ret;
+
+ /* Configure CPU counters by cross-calling to the other CPUs */
+ ret = em_call_function(arm11_setup_pmu);
+ if (ret == 0)
+ scu_setup();
+
+ return 0;
+}
+
+static int arm11_irqs[] = {
+ [0] = IRQ_PMU_CPU0,
+ [1] = IRQ_PMU_CPU1,
+ [2] = IRQ_PMU_CPU2,
+ [3] = IRQ_PMU_CPU3
+};
+
+static int em_start(void)
+{
+ int ret;
+
+ ret = arm11_request_interrupts(arm11_irqs, ARRAY_SIZE(arm11_irqs));
+ if (ret == 0) {
+ em_call_function(arm11_start_pmu);
+
+ ret = scu_start();
+ if (ret)
+ arm11_release_interrupts(arm11_irqs, ARRAY_SIZE(arm11_irqs));
+ }
+ return ret;
+}
+
+static void em_stop(void)
+{
+ em_call_function(arm11_stop_pmu);
+ arm11_release_interrupts(arm11_irqs, ARRAY_SIZE(arm11_irqs));
+ scu_stop();
+}
+
+/*
+ * Why isn't there a function to route an IRQ to a specific CPU in
+ * genirq?
+ */
+static void em_route_irq(int irq, unsigned int cpu)
+{
+ irq_desc[irq].affinity = cpumask_of_cpu(cpu);
+ irq_desc[irq].chip->set_affinity(irq, cpumask_of_cpu(cpu));
+}
+
+static int em_setup(void)
+{
+ /*
+ * Send SCU PMU interrupts to the "owner" CPU.
+ */
+ em_route_irq(IRQ_PMU_SCU0, 0);
+ em_route_irq(IRQ_PMU_SCU1, 0);
+ em_route_irq(IRQ_PMU_SCU2, 1);
+ em_route_irq(IRQ_PMU_SCU3, 1);
+ em_route_irq(IRQ_PMU_SCU4, 2);
+ em_route_irq(IRQ_PMU_SCU5, 2);
+ em_route_irq(IRQ_PMU_SCU6, 3);
+ em_route_irq(IRQ_PMU_SCU7, 3);
+
+ /*
+ * Send CP15 PMU interrupts to the owner CPU.
+ */
+ em_route_irq(IRQ_PMU_CPU0, 0);
+ em_route_irq(IRQ_PMU_CPU1, 1);
+ em_route_irq(IRQ_PMU_CPU2, 2);
+ em_route_irq(IRQ_PMU_CPU3, 3);
+
+ return 0;
+}
+
+struct op_arm_model_spec op_mpcore_spec = {
+ .init = em_setup,
+ .num_counters = MPCORE_NUM_COUNTERS,
+ .setup_ctrs = em_setup_ctrs,
+ .start = em_start,
+ .stop = em_stop,
+ .name = "arm/mpcore",
+};
--- /dev/null
+/**
+ * @file op_model_mpcore.c
+ * MPCORE Event Monitor Driver
+ * @remark Copyright 2004 ARM SMP Development Team
+ * @remark Copyright 2000-2004 Deepak Saxena <dsaxena@mvista.com>
+ * @remark Copyright 2000-2004 MontaVista Software Inc
+ * @remark Copyright 2004 Dave Jiang <dave.jiang@intel.com>
+ * @remark Copyright 2004 Intel Corporation
+ * @remark Copyright 2004 Zwane Mwaikambo <zwane@arm.linux.org.uk>
+ * @remark Copyright 2004 Oprofile Authors
+ *
+ * @remark Read the file COPYING
+ *
+ * @author Zwane Mwaikambo
+ */
+#ifndef OP_MODEL_MPCORE_H
+#define OP_MODEL_MPCORE_H
+
+struct eventmonitor {
+ unsigned long PMCR;
+ unsigned char MCEB[8];
+ unsigned long MC[8];
+};
+
+/*
+ * List of userspace counter numbers: note that the structure is important.
+ * The code relies on CPUn's counters being CPU0's counters + 3n
+ * and on CPU0's counters starting at 0
+ */
+
+#define COUNTER_CPU0_PMN0 0
+#define COUNTER_CPU0_PMN1 1
+#define COUNTER_CPU0_CCNT 2
+
+#define COUNTER_CPU1_PMN0 3
+#define COUNTER_CPU1_PMN1 4
+#define COUNTER_CPU1_CCNT 5
+
+#define COUNTER_CPU2_PMN0 6
+#define COUNTER_CPU2_PMN1 7
+#define COUNTER_CPU2_CCNT 8
+
+#define COUNTER_CPU3_PMN0 9
+#define COUNTER_CPU3_PMN1 10
+#define COUNTER_CPU3_CCNT 11
+
+#define COUNTER_SCU_MN0 12
+#define COUNTER_SCU_MN1 13
+#define COUNTER_SCU_MN2 14
+#define COUNTER_SCU_MN3 15
+#define COUNTER_SCU_MN4 16
+#define COUNTER_SCU_MN5 17
+#define COUNTER_SCU_MN6 18
+#define COUNTER_SCU_MN7 19
+#define NUM_SCU_COUNTERS 8
+
+#define SCU_COUNTER(number) ((number) + COUNTER_SCU_MN0)
+
+#define MPCORE_NUM_COUNTERS SCU_COUNTER(NUM_SCU_COUNTERS)
+
+#endif
--- /dev/null
+/**
+ * @file op_model_v6.c
+ * ARM11 Performance Monitor Driver
+ *
+ * Based on op_model_xscale.c
+ *
+ * @remark Copyright 2000-2004 Deepak Saxena <dsaxena@mvista.com>
+ * @remark Copyright 2000-2004 MontaVista Software Inc
+ * @remark Copyright 2004 Dave Jiang <dave.jiang@intel.com>
+ * @remark Copyright 2004 Intel Corporation
+ * @remark Copyright 2004 Zwane Mwaikambo <zwane@arm.linux.org.uk>
+ * @remark Copyright 2004 OProfile Authors
+ *
+ * @remark Read the file COPYING
+ *
+ * @author Tony Lindgren <tony@atomide.com>
+ */
+
+/* #define DEBUG */
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/oprofile.h>
+#include <linux/interrupt.h>
+#include <asm/irq.h>
+#include <asm/system.h>
+
+#include "op_counter.h"
+#include "op_arm_model.h"
+#include "op_model_arm11_core.h"
+
+static int irqs[] = {
+#ifdef CONFIG_ARCH_OMAP2
+ 3,
+#endif
+};
+
+static void armv6_pmu_stop(void)
+{
+ arm11_stop_pmu();
+ arm11_release_interrupts(irqs, ARRAY_SIZE(irqs));
+}
+
+static int armv6_pmu_start(void)
+{
+ int ret;
+
+ ret = arm11_request_interrupts(irqs, ARRAY_SIZE(irqs));
+ if (ret >= 0)
+ ret = arm11_start_pmu();
+
+ return ret;
+}
+
+static int armv6_detect_pmu(void)
+{
+ return 0;
+}
+
+struct op_arm_model_spec op_armv6_spec = {
+ .init = armv6_detect_pmu,
+ .num_counters = 3,
+ .setup_ctrs = arm11_setup_pmu,
+ .start = armv6_pmu_start,
+ .stop = armv6_pmu_stop,
+ .name = "arm/armv6",
+};
# Makefile for the linux kernel.
#
-obj-y := gpio.o i2c.o pci.o setup.o time.o
-obj-m :=
-obj-n :=
-obj- :=
+obj-y :=
+
+# IOP32X
+obj-$(CONFIG_ARCH_IOP32X) += gpio.o
+obj-$(CONFIG_ARCH_IOP32X) += i2c.o
+obj-$(CONFIG_ARCH_IOP32X) += pci.o
+obj-$(CONFIG_ARCH_IOP32X) += setup.o
+obj-$(CONFIG_ARCH_IOP32X) += time.o
+obj-$(CONFIG_ARCH_IOP32X) += io.o
+obj-$(CONFIG_ARCH_IOP32X) += cp6.o
+
+# IOP33X
+obj-$(CONFIG_ARCH_IOP33X) += gpio.o
+obj-$(CONFIG_ARCH_IOP33X) += i2c.o
+obj-$(CONFIG_ARCH_IOP33X) += pci.o
+obj-$(CONFIG_ARCH_IOP33X) += setup.o
+obj-$(CONFIG_ARCH_IOP33X) += time.o
+obj-$(CONFIG_ARCH_IOP33X) += io.o
+obj-$(CONFIG_ARCH_IOP33X) += cp6.o
+
+# IOP13XX
+obj-$(CONFIG_ARCH_IOP13XX) += cp6.o
+
+obj-m :=
+obj-n :=
+obj- :=
--- /dev/null
+/*
+ * IOP Coprocessor-6 access handler
+ * Copyright (c) 2006, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc., 59 Temple
+ * Place - Suite 330, Boston, MA 02111-1307 USA.
+ *
+ */
+#include <linux/init.h>
+#include <asm/traps.h>
+
+static int cp6_trap(struct pt_regs *regs, unsigned int instr)
+{
+ u32 temp;
+
+ /* enable cp6 access */
+ asm volatile (
+ "mrc p15, 0, %0, c15, c1, 0\n\t"
+ "orr %0, %0, #(1 << 6)\n\t"
+ "mcr p15, 0, %0, c15, c1, 0\n\t"
+ : "=r"(temp));
+
+ return 0;
+}
+
+/* permit kernel space cp6 access
+ * deny user space cp6 access
+ */
+static struct undef_hook cp6_hook = {
+ .instr_mask = 0x0f000ff0,
+ .instr_val = 0x0e000610,
+ .cpsr_mask = MODE_MASK,
+ .cpsr_val = SVC_MODE,
+ .fn = cp6_trap,
+};
+
+void __init iop_init_cp6_handler(void)
+{
+ register_undef_hook(&cp6_hook);
+}
--- /dev/null
+/*
+ * iop3xx custom ioremap implementation
+ * Copyright (c) 2006, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc., 59 Temple
+ * Place - Suite 330, Boston, MA 02111-1307 USA.
+ *
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <asm/hardware.h>
+#include <asm/io.h>
+
+void * __iomem __iop3xx_ioremap(unsigned long cookie, size_t size,
+ unsigned long flags)
+{
+ void __iomem * retval;
+
+ switch (cookie) {
+ case IOP3XX_PCI_LOWER_IO_PA ... IOP3XX_PCI_UPPER_IO_PA:
+ retval = (void *) IOP3XX_PCI_IO_PHYS_TO_VIRT(cookie);
+ break;
+ case IOP3XX_PERIPHERAL_PHYS_BASE ... IOP3XX_PERIPHERAL_UPPER_PA:
+ retval = (void *) IOP3XX_PMMR_PHYS_TO_VIRT(cookie);
+ break;
+ default:
+ retval = __ioremap(cookie, size, flags);
+ }
+
+ return retval;
+}
+EXPORT_SYMBOL(__iop3xx_ioremap);
+
+void __iop3xx_iounmap(void __iomem *addr)
+{
+ extern void __iounmap(volatile void __iomem *addr);
+
+ switch ((u32) addr) {
+ case IOP3XX_PCI_LOWER_IO_VA ... IOP3XX_PCI_UPPER_IO_VA:
+ case IOP3XX_PERIPHERAL_VIRT_BASE ... IOP3XX_PERIPHERAL_UPPER_VA:
+ goto skip;
+ }
+ __iounmap(addr);
+
+skip:
+ return;
+}
+EXPORT_SYMBOL(__iop3xx_iounmap);
if (!res)
panic("PCI: unable to alloc resources");
- res[0].start = IOP3XX_PCI_LOWER_IO_VA;
- res[0].end = IOP3XX_PCI_LOWER_IO_VA + IOP3XX_PCI_IO_WINDOW_SIZE - 1;
+ res[0].start = IOP3XX_PCI_LOWER_IO_PA;
+ res[0].end = IOP3XX_PCI_LOWER_IO_PA + IOP3XX_PCI_IO_WINDOW_SIZE - 1;
res[0].name = "IOP3XX PCI I/O Space";
res[0].flags = IORESOURCE_IO;
request_resource(&ioport_resource, &res[0]);
request_resource(&iomem_resource, &res[1]);
sys->mem_offset = IOP3XX_PCI_LOWER_MEM_PA - IOP3XX_PCI_LOWER_MEM_BA;
- sys->io_offset = IOP3XX_PCI_LOWER_IO_VA - IOP3XX_PCI_LOWER_IO_BA;
+ sys->io_offset = IOP3XX_PCI_LOWER_IO_PA - IOP3XX_PCI_LOWER_IO_BA;
sys->resource[0] = &res[0];
sys->resource[1] = &res[1];
--- /dev/null
+# arch/arm/plat-s3c24xx/Kconfig
+#
+# Copyright 2007 Simtec Electronics
+#
+# Licensed under GPLv2
+
+config PLAT_S3C24XX
+ bool
+ depends on ARCH_S3C2410
+ default y if ARCH_S3C2410
+ help
+ Base platform code for any Samsung S3C device
+
+if PLAT_S3C24XX
+
+config CPU_S3C244X
+ bool
+ depends on ARCH_S3C2410 && (CPU_S3C2440 || CPU_S3C2442)
+ help
+ Support for S3C2440 and S3C2442 Samsung Mobile CPU based systems.
+
+config PM_SIMTEC
+ bool
+ help
+ Common power management code for systems that are
+ compatible with the Simtec style of power management
+
+config S3C2410_BOOT_WATCHDOG
+ bool "S3C2410 Initialisation watchdog"
+ depends on ARCH_S3C2410 && S3C2410_WATCHDOG
+ help
+ Say y to enable the watchdog during the kernel decompression
+ stage. If the kernel fails to uncompress, then the watchdog
+ will trigger a reset and the system should restart.
+
+config S3C2410_BOOT_ERROR_RESET
+ bool "S3C2410 Reboot on decompression error"
+ depends on ARCH_S3C2410
+ help
+ Say y here to use the watchdog to reset the system if the
+ kernel decompressor detects an error during decompression.
+
+config S3C2410_PM_DEBUG
+ bool "S3C2410 PM Suspend debug"
+ depends on ARCH_S3C2410 && PM
+ help
+ Say Y here if you want verbose debugging from the PM Suspend and
+ Resume code. See <file:Documentation/arm/Samsung-S3C24XX/Suspend.txt>
+ for more information.
+
+config S3C2410_PM_CHECK
+ bool "S3C2410 PM Suspend Memory CRC"
+ depends on ARCH_S3C2410 && PM && CRC32
+ help
+ Enable the PM code's memory area checksum over sleep. This option
+ will generate CRCs of all blocks of memory, and store them before
+ going to sleep. The blocks are then checked on resume for any
+ errors.
+
+config S3C2410_PM_CHECK_CHUNKSIZE
+ int "S3C2410 PM Suspend CRC Chunksize (KiB)"
+ depends on ARCH_S3C2410 && PM && S3C2410_PM_CHECK
+ default 64
+ help
+ Set the chunksize in Kilobytes of the CRC for checking memory
+ corruption over suspend and resume. A smaller value will mean that
+ the CRC data block will take more memory, but wil identify any
+ faults with better precision.
+
+config S3C2410_LOWLEVEL_UART_PORT
+ int "S3C2410 UART to use for low-level messages"
+ default 0
+ help
+ Choice of which UART port to use for the low-level messages,
+ such as the `Uncompressing...` at start time. The value of
+ this configuration should be between zero and two. The port
+ must have been initialised by the boot-loader before use.
+
+config S3C2410_DMA
+ bool "S3C2410 DMA support"
+ depends on ARCH_S3C2410
+ help
+ S3C2410 DMA support. This is needed for drivers like sound which
+ use the S3C2410's DMA system to move data to and from the
+ peripheral blocks.
+
+config S3C2410_DMA_DEBUG
+ bool "S3C2410 DMA support debug"
+ depends on ARCH_S3C2410 && S3C2410_DMA
+ help
+ Enable debugging output for the DMA code. This option sends info
+ to the kernel log, at priority KERN_DEBUG.
+
+config MACH_SMDK
+ bool
+ help
+ Common machine code for SMDK2410 and SMDK2440
+
+endif
--- /dev/null
+# arch/arm/plat-s3c24xx/Makefile
+#
+# Copyright 2007 Simtec Electronics
+#
+# Licensed under GPLv2
+
+obj-y :=
+obj-m :=
+obj-n :=
+obj- :=
+
+
+# Core files
+
+obj-y += cpu.o
+obj-y += irq.o
+obj-y += devs.o
+obj-y += gpio.o
+obj-y += time.o
+obj-y += clock.o
+
+# Architecture dependant builds
+
+obj-$(CONFIG_CPU_S3C244X) += s3c244x.o
+obj-$(CONFIG_CPU_S3C244X) += s3c244x-irq.o
+obj-$(CONFIG_PM_SIMTEC) += pm-simtec.o
+obj-$(CONFIG_PM) += pm.o
+obj-$(CONFIG_PM) += sleep.o
+obj-$(CONFIG_S3C2410_DMA) += dma.o
+obj-$(CONFIG_MACH_SMDK) += common-smdk.o
--- /dev/null
+/* linux/arch/arm/plat-s3c24xx/clock.c
+ *
+ * Copyright (c) 2004-2005 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C24XX Core clock control support
+ *
+ * Based on, and code from linux/arch/arm/mach-versatile/clock.c
+ **
+ ** Copyright (C) 2004 ARM Limited.
+ ** Written by Deep Blue Solutions Limited.
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/sysdev.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/clk.h>
+#include <linux/mutex.h>
+#include <linux/delay.h>
+
+#include <asm/hardware.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+
+#include <asm/arch/regs-clock.h>
+#include <asm/arch/regs-gpio.h>
+
+#include <asm/plat-s3c24xx/clock.h>
+#include <asm/plat-s3c24xx/cpu.h>
+
+/* clock information */
+
+static LIST_HEAD(clocks);
+
+DEFINE_MUTEX(clocks_mutex);
+
+/* enable and disable calls for use with the clk struct */
+
+static int clk_null_enable(struct clk *clk, int enable)
+{
+ return 0;
+}
+
+/* Clock API calls */
+
+struct clk *clk_get(struct device *dev, const char *id)
+{
+ struct clk *p;
+ struct clk *clk = ERR_PTR(-ENOENT);
+ int idno;
+
+ if (dev == NULL || dev->bus != &platform_bus_type)
+ idno = -1;
+ else
+ idno = to_platform_device(dev)->id;
+
+ mutex_lock(&clocks_mutex);
+
+ list_for_each_entry(p, &clocks, list) {
+ if (p->id == idno &&
+ strcmp(id, p->name) == 0 &&
+ try_module_get(p->owner)) {
+ clk = p;
+ break;
+ }
+ }
+
+ /* check for the case where a device was supplied, but the
+ * clock that was being searched for is not device specific */
+
+ if (IS_ERR(clk)) {
+ list_for_each_entry(p, &clocks, list) {
+ if (p->id == -1 && strcmp(id, p->name) == 0 &&
+ try_module_get(p->owner)) {
+ clk = p;
+ break;
+ }
+ }
+ }
+
+ mutex_unlock(&clocks_mutex);
+ return clk;
+}
+
+void clk_put(struct clk *clk)
+{
+ module_put(clk->owner);
+}
+
+int clk_enable(struct clk *clk)
+{
+ if (IS_ERR(clk) || clk == NULL)
+ return -EINVAL;
+
+ clk_enable(clk->parent);
+
+ mutex_lock(&clocks_mutex);
+
+ if ((clk->usage++) == 0)
+ (clk->enable)(clk, 1);
+
+ mutex_unlock(&clocks_mutex);
+ return 0;
+}
+
+void clk_disable(struct clk *clk)
+{
+ if (IS_ERR(clk) || clk == NULL)
+ return;
+
+ mutex_lock(&clocks_mutex);
+
+ if ((--clk->usage) == 0)
+ (clk->enable)(clk, 0);
+
+ mutex_unlock(&clocks_mutex);
+ clk_disable(clk->parent);
+}
+
+
+unsigned long clk_get_rate(struct clk *clk)
+{
+ if (IS_ERR(clk))
+ return 0;
+
+ if (clk->rate != 0)
+ return clk->rate;
+
+ if (clk->get_rate != NULL)
+ return (clk->get_rate)(clk);
+
+ if (clk->parent != NULL)
+ return clk_get_rate(clk->parent);
+
+ return clk->rate;
+}
+
+long clk_round_rate(struct clk *clk, unsigned long rate)
+{
+ if (!IS_ERR(clk) && clk->round_rate)
+ return (clk->round_rate)(clk, rate);
+
+ return rate;
+}
+
+int clk_set_rate(struct clk *clk, unsigned long rate)
+{
+ int ret;
+
+ if (IS_ERR(clk))
+ return -EINVAL;
+
+ mutex_lock(&clocks_mutex);
+ ret = (clk->set_rate)(clk, rate);
+ mutex_unlock(&clocks_mutex);
+
+ return ret;
+}
+
+struct clk *clk_get_parent(struct clk *clk)
+{
+ return clk->parent;
+}
+
+int clk_set_parent(struct clk *clk, struct clk *parent)
+{
+ int ret = 0;
+
+ if (IS_ERR(clk))
+ return -EINVAL;
+
+ mutex_lock(&clocks_mutex);
+
+ if (clk->set_parent)
+ ret = (clk->set_parent)(clk, parent);
+
+ mutex_unlock(&clocks_mutex);
+
+ return ret;
+}
+
+EXPORT_SYMBOL(clk_get);
+EXPORT_SYMBOL(clk_put);
+EXPORT_SYMBOL(clk_enable);
+EXPORT_SYMBOL(clk_disable);
+EXPORT_SYMBOL(clk_get_rate);
+EXPORT_SYMBOL(clk_round_rate);
+EXPORT_SYMBOL(clk_set_rate);
+EXPORT_SYMBOL(clk_get_parent);
+EXPORT_SYMBOL(clk_set_parent);
+
+/* base clocks */
+
+struct clk clk_xtal = {
+ .name = "xtal",
+ .id = -1,
+ .rate = 0,
+ .parent = NULL,
+ .ctrlbit = 0,
+};
+
+struct clk clk_mpll = {
+ .name = "mpll",
+ .id = -1,
+};
+
+struct clk clk_upll = {
+ .name = "upll",
+ .id = -1,
+ .parent = NULL,
+ .ctrlbit = 0,
+};
+
+struct clk clk_f = {
+ .name = "fclk",
+ .id = -1,
+ .rate = 0,
+ .parent = &clk_mpll,
+ .ctrlbit = 0,
+};
+
+struct clk clk_h = {
+ .name = "hclk",
+ .id = -1,
+ .rate = 0,
+ .parent = NULL,
+ .ctrlbit = 0,
+};
+
+struct clk clk_p = {
+ .name = "pclk",
+ .id = -1,
+ .rate = 0,
+ .parent = NULL,
+ .ctrlbit = 0,
+};
+
+struct clk clk_usb_bus = {
+ .name = "usb-bus",
+ .id = -1,
+ .rate = 0,
+ .parent = &clk_upll,
+};
+
+/* clocks that could be registered by external code */
+
+static int s3c24xx_dclk_enable(struct clk *clk, int enable)
+{
+ unsigned long dclkcon = __raw_readl(S3C24XX_DCLKCON);
+
+ if (enable)
+ dclkcon |= clk->ctrlbit;
+ else
+ dclkcon &= ~clk->ctrlbit;
+
+ __raw_writel(dclkcon, S3C24XX_DCLKCON);
+
+ return 0;
+}
+
+static int s3c24xx_dclk_setparent(struct clk *clk, struct clk *parent)
+{
+ unsigned long dclkcon;
+ unsigned int uclk;
+
+ if (parent == &clk_upll)
+ uclk = 1;
+ else if (parent == &clk_p)
+ uclk = 0;
+ else
+ return -EINVAL;
+
+ clk->parent = parent;
+
+ dclkcon = __raw_readl(S3C24XX_DCLKCON);
+
+ if (clk->ctrlbit == S3C2410_DCLKCON_DCLK0EN) {
+ if (uclk)
+ dclkcon |= S3C2410_DCLKCON_DCLK0_UCLK;
+ else
+ dclkcon &= ~S3C2410_DCLKCON_DCLK0_UCLK;
+ } else {
+ if (uclk)
+ dclkcon |= S3C2410_DCLKCON_DCLK1_UCLK;
+ else
+ dclkcon &= ~S3C2410_DCLKCON_DCLK1_UCLK;
+ }
+
+ __raw_writel(dclkcon, S3C24XX_DCLKCON);
+
+ return 0;
+}
+
+
+static int s3c24xx_clkout_setparent(struct clk *clk, struct clk *parent)
+{
+ unsigned long mask;
+ unsigned long source;
+
+ /* calculate the MISCCR setting for the clock */
+
+ if (parent == &clk_xtal)
+ source = S3C2410_MISCCR_CLK0_MPLL;
+ else if (parent == &clk_upll)
+ source = S3C2410_MISCCR_CLK0_UPLL;
+ else if (parent == &clk_f)
+ source = S3C2410_MISCCR_CLK0_FCLK;
+ else if (parent == &clk_h)
+ source = S3C2410_MISCCR_CLK0_HCLK;
+ else if (parent == &clk_p)
+ source = S3C2410_MISCCR_CLK0_PCLK;
+ else if (clk == &s3c24xx_clkout0 && parent == &s3c24xx_dclk0)
+ source = S3C2410_MISCCR_CLK0_DCLK0;
+ else if (clk == &s3c24xx_clkout1 && parent == &s3c24xx_dclk1)
+ source = S3C2410_MISCCR_CLK0_DCLK0;
+ else
+ return -EINVAL;
+
+ clk->parent = parent;
+
+ if (clk == &s3c24xx_dclk0)
+ mask = S3C2410_MISCCR_CLK0_MASK;
+ else {
+ source <<= 4;
+ mask = S3C2410_MISCCR_CLK1_MASK;
+ }
+
+ s3c2410_modify_misccr(mask, source);
+ return 0;
+}
+
+/* external clock definitions */
+
+struct clk s3c24xx_dclk0 = {
+ .name = "dclk0",
+ .id = -1,
+ .ctrlbit = S3C2410_DCLKCON_DCLK0EN,
+ .enable = s3c24xx_dclk_enable,
+ .set_parent = s3c24xx_dclk_setparent,
+};
+
+struct clk s3c24xx_dclk1 = {
+ .name = "dclk1",
+ .id = -1,
+ .ctrlbit = S3C2410_DCLKCON_DCLK0EN,
+ .enable = s3c24xx_dclk_enable,
+ .set_parent = s3c24xx_dclk_setparent,
+};
+
+struct clk s3c24xx_clkout0 = {
+ .name = "clkout0",
+ .id = -1,
+ .set_parent = s3c24xx_clkout_setparent,
+};
+
+struct clk s3c24xx_clkout1 = {
+ .name = "clkout1",
+ .id = -1,
+ .set_parent = s3c24xx_clkout_setparent,
+};
+
+struct clk s3c24xx_uclk = {
+ .name = "uclk",
+ .id = -1,
+};
+
+/* initialise the clock system */
+
+int s3c24xx_register_clock(struct clk *clk)
+{
+ clk->owner = THIS_MODULE;
+
+ if (clk->enable == NULL)
+ clk->enable = clk_null_enable;
+
+ /* add to the list of available clocks */
+
+ mutex_lock(&clocks_mutex);
+ list_add(&clk->list, &clocks);
+ mutex_unlock(&clocks_mutex);
+
+ return 0;
+}
+
+/* initalise all the clocks */
+
+int __init s3c24xx_setup_clocks(unsigned long xtal,
+ unsigned long fclk,
+ unsigned long hclk,
+ unsigned long pclk)
+{
+ printk(KERN_INFO "S3C24XX Clocks, (c) 2004 Simtec Electronics\n");
+
+ /* initialise the main system clocks */
+
+ clk_xtal.rate = xtal;
+ clk_upll.rate = s3c2410_get_pll(__raw_readl(S3C2410_UPLLCON), xtal);
+
+ clk_mpll.rate = fclk;
+ clk_h.rate = hclk;
+ clk_p.rate = pclk;
+ clk_f.rate = fclk;
+
+ /* assume uart clocks are correctly setup */
+
+ /* register our clocks */
+
+ if (s3c24xx_register_clock(&clk_xtal) < 0)
+ printk(KERN_ERR "failed to register master xtal\n");
+
+ if (s3c24xx_register_clock(&clk_mpll) < 0)
+ printk(KERN_ERR "failed to register mpll clock\n");
+
+ if (s3c24xx_register_clock(&clk_upll) < 0)
+ printk(KERN_ERR "failed to register upll clock\n");
+
+ if (s3c24xx_register_clock(&clk_f) < 0)
+ printk(KERN_ERR "failed to register cpu fclk\n");
+
+ if (s3c24xx_register_clock(&clk_h) < 0)
+ printk(KERN_ERR "failed to register cpu hclk\n");
+
+ if (s3c24xx_register_clock(&clk_p) < 0)
+ printk(KERN_ERR "failed to register cpu pclk\n");
+
+ return 0;
+}
-/* linux/arch/arm/mach-s3c2410/common-smdk.c
+/* linux/arch/arm/plat-s3c24xx/common-smdk.c
*
* Copyright (c) 2006 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
#include <asm/arch/nand.h>
-#include "common-smdk.h"
-#include "devs.h"
-#include "pm.h"
+#include <asm/plat-s3c24xx/common-smdk.h>
+#include <asm/plat-s3c24xx/devs.h>
+#include <asm/plat-s3c24xx/pm.h>
/* LED devices */
-/* linux/arch/arm/mach-s3c2410/cpu.c
+/* linux/arch/arm/plat-s3c24xx/cpu.c
*
* Copyright (c) 2004-2005 Simtec Electronics
* http://www.simtec.co.uk/products/SWLINUX/
#include <asm/arch/regs-gpio.h>
#include <asm/arch/regs-serial.h>
-#include "cpu.h"
-#include "devs.h"
-#include "clock.h"
-#include "s3c2400.h"
-#include "s3c2410.h"
-#include "s3c2412.h"
+#include <asm/plat-s3c24xx/cpu.h>
+#include <asm/plat-s3c24xx/devs.h>
+#include <asm/plat-s3c24xx/clock.h>
+#include <asm/plat-s3c24xx/s3c2400.h>
+#include <asm/plat-s3c24xx/s3c2410.h>
+#include <asm/plat-s3c24xx/s3c2412.h>
#include "s3c244x.h"
-#include "s3c2440.h"
-#include "s3c2442.h"
+#include <asm/plat-s3c24xx/s3c2440.h>
+#include <asm/plat-s3c24xx/s3c2442.h>
+#include <asm/plat-s3c24xx/s3c2443.h>
struct cpu_table {
unsigned long idcode;
static const char name_s3c2412[] = "S3C2412";
static const char name_s3c2440[] = "S3C2440";
static const char name_s3c2442[] = "S3C2442";
+static const char name_s3c2443[] = "S3C2443";
static const char name_s3c2410a[] = "S3C2410A";
static const char name_s3c2440a[] = "S3C2440A";
.init = s3c2412_init,
.name = name_s3c2412,
},
+ {
+ .idcode = 0x32443001,
+ .idmask = 0xffffffff,
+ .map_io = s3c2443_map_io,
+ .init_clocks = s3c2443_init_clocks,
+ .init_uarts = s3c2443_init_uarts,
+ .init = s3c2443_init,
+ .name = name_s3c2443,
+ },
{
.idcode = 0x0, /* S3C2400 doesn't have an idcode */
.idmask = 0xffffffff,
-/* linux/arch/arm/mach-s3c2410/devs.c
+/* linux/arch/arm/plat-s3c24xx/devs.c
*
* Copyright (c) 2004 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
#include <asm/irq.h>
#include <asm/arch/regs-serial.h>
+#include <asm/arch/udc.h>
-#include "devs.h"
-#include "cpu.h"
+#include <asm/plat-s3c24xx/devs.h>
+#include <asm/plat-s3c24xx/cpu.h>
/* Serial port registrations */
EXPORT_SYMBOL(s3c_device_usbgadget);
+void __init s3c24xx_udc_set_platdata(struct s3c2410_udc_mach_info *pd)
+{
+ struct s3c2410_udc_mach_info *npd;
+
+ npd = kmalloc(sizeof(*npd), GFP_KERNEL);
+ if (npd) {
+ memcpy(npd, pd, sizeof(*npd));
+ s3c_device_usbgadget.dev.platform_data = npd;
+ } else {
+ printk(KERN_ERR "no memory for udc platform data\n");
+ }
+}
+
+
/* Watchdog */
static struct resource s3c_wdt_resource[] = {
--- /dev/null
+/* linux/arch/arm/plat-s3c24xx/dma.c
+ *
+ * Copyright (c) 2003-2005,2006 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2410 DMA core
+ *
+ * http://armlinux.simtec.co.uk/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+
+#ifdef CONFIG_S3C2410_DMA_DEBUG
+#define DEBUG
+#endif
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+#include <linux/sysdev.h>
+#include <linux/slab.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+
+#include <asm/system.h>
+#include <asm/irq.h>
+#include <asm/hardware.h>
+#include <asm/io.h>
+#include <asm/dma.h>
+
+#include <asm/mach/dma.h>
+#include <asm/arch/map.h>
+
+#include <asm/plat-s3c24xx/dma.h>
+
+/* io map for dma */
+static void __iomem *dma_base;
+static struct kmem_cache *dma_kmem;
+
+static int dma_channels;
+
+struct s3c24xx_dma_selection dma_sel;
+
+/* dma channel state information */
+struct s3c2410_dma_chan s3c2410_chans[S3C2410_DMA_CHANNELS];
+
+/* debugging functions */
+
+#define BUF_MAGIC (0xcafebabe)
+
+#define dmawarn(fmt...) printk(KERN_DEBUG fmt)
+
+#define dma_regaddr(chan, reg) ((chan)->regs + (reg))
+
+#if 1
+#define dma_wrreg(chan, reg, val) writel((val), (chan)->regs + (reg))
+#else
+static inline void
+dma_wrreg(struct s3c2410_dma_chan *chan, int reg, unsigned long val)
+{
+ pr_debug("writing %08x to register %08x\n",(unsigned int)val,reg);
+ writel(val, dma_regaddr(chan, reg));
+}
+#endif
+
+#define dma_rdreg(chan, reg) readl((chan)->regs + (reg))
+
+/* captured register state for debug */
+
+struct s3c2410_dma_regstate {
+ unsigned long dcsrc;
+ unsigned long disrc;
+ unsigned long dstat;
+ unsigned long dcon;
+ unsigned long dmsktrig;
+};
+
+#ifdef CONFIG_S3C2410_DMA_DEBUG
+
+/* dmadbg_showregs
+ *
+ * simple debug routine to print the current state of the dma registers
+*/
+
+static void
+dmadbg_capture(struct s3c2410_dma_chan *chan, struct s3c2410_dma_regstate *regs)
+{
+ regs->dcsrc = dma_rdreg(chan, S3C2410_DMA_DCSRC);
+ regs->disrc = dma_rdreg(chan, S3C2410_DMA_DISRC);
+ regs->dstat = dma_rdreg(chan, S3C2410_DMA_DSTAT);
+ regs->dcon = dma_rdreg(chan, S3C2410_DMA_DCON);
+ regs->dmsktrig = dma_rdreg(chan, S3C2410_DMA_DMASKTRIG);
+}
+
+static void
+dmadbg_dumpregs(const char *fname, int line, struct s3c2410_dma_chan *chan,
+ struct s3c2410_dma_regstate *regs)
+{
+ printk(KERN_DEBUG "dma%d: %s:%d: DCSRC=%08lx, DISRC=%08lx, DSTAT=%08lx DMT=%02lx, DCON=%08lx\n",
+ chan->number, fname, line,
+ regs->dcsrc, regs->disrc, regs->dstat, regs->dmsktrig,
+ regs->dcon);
+}
+
+static void
+dmadbg_showchan(const char *fname, int line, struct s3c2410_dma_chan *chan)
+{
+ struct s3c2410_dma_regstate state;
+
+ dmadbg_capture(chan, &state);
+
+ printk(KERN_DEBUG "dma%d: %s:%d: ls=%d, cur=%p, %p %p\n",
+ chan->number, fname, line, chan->load_state,
+ chan->curr, chan->next, chan->end);
+
+ dmadbg_dumpregs(fname, line, chan, &state);
+}
+
+static void
+dmadbg_showregs(const char *fname, int line, struct s3c2410_dma_chan *chan)
+{
+ struct s3c2410_dma_regstate state;
+
+ dmadbg_capture(chan, &state);
+ dmadbg_dumpregs(fname, line, chan, &state);
+}
+
+#define dbg_showregs(chan) dmadbg_showregs(__FUNCTION__, __LINE__, (chan))
+#define dbg_showchan(chan) dmadbg_showchan(__FUNCTION__, __LINE__, (chan))
+#else
+#define dbg_showregs(chan) do { } while(0)
+#define dbg_showchan(chan) do { } while(0)
+#endif /* CONFIG_S3C2410_DMA_DEBUG */
+
+static struct s3c2410_dma_chan *dma_chan_map[DMACH_MAX];
+
+/* lookup_dma_channel
+ *
+ * change the dma channel number given into a real dma channel id
+*/
+
+static struct s3c2410_dma_chan *lookup_dma_channel(unsigned int channel)
+{
+ if (channel & DMACH_LOW_LEVEL)
+ return &s3c2410_chans[channel & ~DMACH_LOW_LEVEL];
+ else
+ return dma_chan_map[channel];
+}
+
+/* s3c2410_dma_stats_timeout
+ *
+ * Update DMA stats from timeout info
+*/
+
+static void
+s3c2410_dma_stats_timeout(struct s3c2410_dma_stats *stats, int val)
+{
+ if (stats == NULL)
+ return;
+
+ if (val > stats->timeout_longest)
+ stats->timeout_longest = val;
+ if (val < stats->timeout_shortest)
+ stats->timeout_shortest = val;
+
+ stats->timeout_avg += val;
+}
+
+/* s3c2410_dma_waitforload
+ *
+ * wait for the DMA engine to load a buffer, and update the state accordingly
+*/
+
+static int
+s3c2410_dma_waitforload(struct s3c2410_dma_chan *chan, int line)
+{
+ int timeout = chan->load_timeout;
+ int took;
+
+ if (chan->load_state != S3C2410_DMALOAD_1LOADED) {
+ printk(KERN_ERR "dma%d: s3c2410_dma_waitforload() called in loadstate %d from line %d\n", chan->number, chan->load_state, line);
+ return 0;
+ }
+
+ if (chan->stats != NULL)
+ chan->stats->loads++;
+
+ while (--timeout > 0) {
+ if ((dma_rdreg(chan, S3C2410_DMA_DSTAT) << (32-20)) != 0) {
+ took = chan->load_timeout - timeout;
+
+ s3c2410_dma_stats_timeout(chan->stats, took);
+
+ switch (chan->load_state) {
+ case S3C2410_DMALOAD_1LOADED:
+ chan->load_state = S3C2410_DMALOAD_1RUNNING;
+ break;
+
+ default:
+ printk(KERN_ERR "dma%d: unknown load_state in s3c2410_dma_waitforload() %d\n", chan->number, chan->load_state);
+ }
+
+ return 1;
+ }
+ }
+
+ if (chan->stats != NULL) {
+ chan->stats->timeout_failed++;
+ }
+
+ return 0;
+}
+
+
+
+/* s3c2410_dma_loadbuffer
+ *
+ * load a buffer, and update the channel state
+*/
+
+static inline int
+s3c2410_dma_loadbuffer(struct s3c2410_dma_chan *chan,
+ struct s3c2410_dma_buf *buf)
+{
+ unsigned long reload;
+
+ pr_debug("s3c2410_chan_loadbuffer: loading buff %p (0x%08lx,0x%06x)\n",
+ buf, (unsigned long)buf->data, buf->size);
+
+ if (buf == NULL) {
+ dmawarn("buffer is NULL\n");
+ return -EINVAL;
+ }
+
+ /* check the state of the channel before we do anything */
+
+ if (chan->load_state == S3C2410_DMALOAD_1LOADED) {
+ dmawarn("load_state is S3C2410_DMALOAD_1LOADED\n");
+ }
+
+ if (chan->load_state == S3C2410_DMALOAD_1LOADED_1RUNNING) {
+ dmawarn("state is S3C2410_DMALOAD_1LOADED_1RUNNING\n");
+ }
+
+ /* it would seem sensible if we are the last buffer to not bother
+ * with the auto-reload bit, so that the DMA engine will not try
+ * and load another transfer after this one has finished...
+ */
+ if (chan->load_state == S3C2410_DMALOAD_NONE) {
+ pr_debug("load_state is none, checking for noreload (next=%p)\n",
+ buf->next);
+ reload = (buf->next == NULL) ? S3C2410_DCON_NORELOAD : 0;
+ } else {
+ //pr_debug("load_state is %d => autoreload\n", chan->load_state);
+ reload = S3C2410_DCON_AUTORELOAD;
+ }
+
+ if ((buf->data & 0xf0000000) != 0x30000000) {
+ dmawarn("dmaload: buffer is %p\n", (void *)buf->data);
+ }
+
+ writel(buf->data, chan->addr_reg);
+
+ dma_wrreg(chan, S3C2410_DMA_DCON,
+ chan->dcon | reload | (buf->size/chan->xfer_unit));
+
+ chan->next = buf->next;
+
+ /* update the state of the channel */
+
+ switch (chan->load_state) {
+ case S3C2410_DMALOAD_NONE:
+ chan->load_state = S3C2410_DMALOAD_1LOADED;
+ break;
+
+ case S3C2410_DMALOAD_1RUNNING:
+ chan->load_state = S3C2410_DMALOAD_1LOADED_1RUNNING;
+ break;
+
+ default:
+ dmawarn("dmaload: unknown state %d in loadbuffer\n",
+ chan->load_state);
+ break;
+ }
+
+ return 0;
+}
+
+/* s3c2410_dma_call_op
+ *
+ * small routine to call the op routine with the given op if it has been
+ * registered
+*/
+
+static void
+s3c2410_dma_call_op(struct s3c2410_dma_chan *chan, enum s3c2410_chan_op op)
+{
+ if (chan->op_fn != NULL) {
+ (chan->op_fn)(chan, op);
+ }
+}
+
+/* s3c2410_dma_buffdone
+ *
+ * small wrapper to check if callback routine needs to be called, and
+ * if so, call it
+*/
+
+static inline void
+s3c2410_dma_buffdone(struct s3c2410_dma_chan *chan, struct s3c2410_dma_buf *buf,
+ enum s3c2410_dma_buffresult result)
+{
+#if 0
+ pr_debug("callback_fn=%p, buf=%p, id=%p, size=%d, result=%d\n",
+ chan->callback_fn, buf, buf->id, buf->size, result);
+#endif
+
+ if (chan->callback_fn != NULL) {
+ (chan->callback_fn)(chan, buf->id, buf->size, result);
+ }
+}
+
+/* s3c2410_dma_start
+ *
+ * start a dma channel going
+*/
+
+static int s3c2410_dma_start(struct s3c2410_dma_chan *chan)
+{
+ unsigned long tmp;
+ unsigned long flags;
+
+ pr_debug("s3c2410_start_dma: channel=%d\n", chan->number);
+
+ local_irq_save(flags);
+
+ if (chan->state == S3C2410_DMA_RUNNING) {
+ pr_debug("s3c2410_start_dma: already running (%d)\n", chan->state);
+ local_irq_restore(flags);
+ return 0;
+ }
+
+ chan->state = S3C2410_DMA_RUNNING;
+
+ /* check wether there is anything to load, and if not, see
+ * if we can find anything to load
+ */
+
+ if (chan->load_state == S3C2410_DMALOAD_NONE) {
+ if (chan->next == NULL) {
+ printk(KERN_ERR "dma%d: channel has nothing loaded\n",
+ chan->number);
+ chan->state = S3C2410_DMA_IDLE;
+ local_irq_restore(flags);
+ return -EINVAL;
+ }
+
+ s3c2410_dma_loadbuffer(chan, chan->next);
+ }
+
+ dbg_showchan(chan);
+
+ /* enable the channel */
+
+ if (!chan->irq_enabled) {
+ enable_irq(chan->irq);
+ chan->irq_enabled = 1;
+ }
+
+ /* start the channel going */
+
+ tmp = dma_rdreg(chan, S3C2410_DMA_DMASKTRIG);
+ tmp &= ~S3C2410_DMASKTRIG_STOP;
+ tmp |= S3C2410_DMASKTRIG_ON;
+ dma_wrreg(chan, S3C2410_DMA_DMASKTRIG, tmp);
+
+ pr_debug("dma%d: %08lx to DMASKTRIG\n", chan->number, tmp);
+
+#if 0
+ /* the dma buffer loads should take care of clearing the AUTO
+ * reloading feature */
+ tmp = dma_rdreg(chan, S3C2410_DMA_DCON);
+ tmp &= ~S3C2410_DCON_NORELOAD;
+ dma_wrreg(chan, S3C2410_DMA_DCON, tmp);
+#endif
+
+ s3c2410_dma_call_op(chan, S3C2410_DMAOP_START);
+
+ dbg_showchan(chan);
+
+ /* if we've only loaded one buffer onto the channel, then chec
+ * to see if we have another, and if so, try and load it so when
+ * the first buffer is finished, the new one will be loaded onto
+ * the channel */
+
+ if (chan->next != NULL) {
+ if (chan->load_state == S3C2410_DMALOAD_1LOADED) {
+
+ if (s3c2410_dma_waitforload(chan, __LINE__) == 0) {
+ pr_debug("%s: buff not yet loaded, no more todo\n",
+ __FUNCTION__);
+ } else {
+ chan->load_state = S3C2410_DMALOAD_1RUNNING;
+ s3c2410_dma_loadbuffer(chan, chan->next);
+ }
+
+ } else if (chan->load_state == S3C2410_DMALOAD_1RUNNING) {
+ s3c2410_dma_loadbuffer(chan, chan->next);
+ }
+ }
+
+
+ local_irq_restore(flags);
+
+ return 0;
+}
+
+/* s3c2410_dma_canload
+ *
+ * work out if we can queue another buffer into the DMA engine
+*/
+
+static int
+s3c2410_dma_canload(struct s3c2410_dma_chan *chan)
+{
+ if (chan->load_state == S3C2410_DMALOAD_NONE ||
+ chan->load_state == S3C2410_DMALOAD_1RUNNING)
+ return 1;
+
+ return 0;
+}
+
+/* s3c2410_dma_enqueue
+ *
+ * queue an given buffer for dma transfer.
+ *
+ * id the device driver's id information for this buffer
+ * data the physical address of the buffer data
+ * size the size of the buffer in bytes
+ *
+ * If the channel is not running, then the flag S3C2410_DMAF_AUTOSTART
+ * is checked, and if set, the channel is started. If this flag isn't set,
+ * then an error will be returned.
+ *
+ * It is possible to queue more than one DMA buffer onto a channel at
+ * once, and the code will deal with the re-loading of the next buffer
+ * when necessary.
+*/
+
+int s3c2410_dma_enqueue(unsigned int channel, void *id,
+ dma_addr_t data, int size)
+{
+ struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
+ struct s3c2410_dma_buf *buf;
+ unsigned long flags;
+
+ if (chan == NULL)
+ return -EINVAL;
+
+ pr_debug("%s: id=%p, data=%08x, size=%d\n",
+ __FUNCTION__, id, (unsigned int)data, size);
+
+ buf = kmem_cache_alloc(dma_kmem, GFP_ATOMIC);
+ if (buf == NULL) {
+ pr_debug("%s: out of memory (%ld alloc)\n",
+ __FUNCTION__, (long)sizeof(*buf));
+ return -ENOMEM;
+ }
+
+ //pr_debug("%s: new buffer %p\n", __FUNCTION__, buf);
+ //dbg_showchan(chan);
+
+ buf->next = NULL;
+ buf->data = buf->ptr = data;
+ buf->size = size;
+ buf->id = id;
+ buf->magic = BUF_MAGIC;
+
+ local_irq_save(flags);
+
+ if (chan->curr == NULL) {
+ /* we've got nothing loaded... */
+ pr_debug("%s: buffer %p queued onto empty channel\n",
+ __FUNCTION__, buf);
+
+ chan->curr = buf;
+ chan->end = buf;
+ chan->next = NULL;
+ } else {
+ pr_debug("dma%d: %s: buffer %p queued onto non-empty channel\n",
+ chan->number, __FUNCTION__, buf);
+
+ if (chan->end == NULL)
+ pr_debug("dma%d: %s: %p not empty, and chan->end==NULL?\n",
+ chan->number, __FUNCTION__, chan);
+
+ chan->end->next = buf;
+ chan->end = buf;
+ }
+
+ /* if necessary, update the next buffer field */
+ if (chan->next == NULL)
+ chan->next = buf;
+
+ /* check to see if we can load a buffer */
+ if (chan->state == S3C2410_DMA_RUNNING) {
+ if (chan->load_state == S3C2410_DMALOAD_1LOADED && 1) {
+ if (s3c2410_dma_waitforload(chan, __LINE__) == 0) {
+ printk(KERN_ERR "dma%d: loadbuffer:"
+ "timeout loading buffer\n",
+ chan->number);
+ dbg_showchan(chan);
+ local_irq_restore(flags);
+ return -EINVAL;
+ }
+ }
+
+ while (s3c2410_dma_canload(chan) && chan->next != NULL) {
+ s3c2410_dma_loadbuffer(chan, chan->next);
+ }
+ } else if (chan->state == S3C2410_DMA_IDLE) {
+ if (chan->flags & S3C2410_DMAF_AUTOSTART) {
+ s3c2410_dma_ctrl(chan->number, S3C2410_DMAOP_START);
+ }
+ }
+
+ local_irq_restore(flags);
+ return 0;
+}
+
+EXPORT_SYMBOL(s3c2410_dma_enqueue);
+
+static inline void
+s3c2410_dma_freebuf(struct s3c2410_dma_buf *buf)
+{
+ int magicok = (buf->magic == BUF_MAGIC);
+
+ buf->magic = -1;
+
+ if (magicok) {
+ kmem_cache_free(dma_kmem, buf);
+ } else {
+ printk("s3c2410_dma_freebuf: buff %p with bad magic\n", buf);
+ }
+}
+
+/* s3c2410_dma_lastxfer
+ *
+ * called when the system is out of buffers, to ensure that the channel
+ * is prepared for shutdown.
+*/
+
+static inline void
+s3c2410_dma_lastxfer(struct s3c2410_dma_chan *chan)
+{
+#if 0
+ pr_debug("dma%d: s3c2410_dma_lastxfer: load_state %d\n",
+ chan->number, chan->load_state);
+#endif
+
+ switch (chan->load_state) {
+ case S3C2410_DMALOAD_NONE:
+ break;
+
+ case S3C2410_DMALOAD_1LOADED:
+ if (s3c2410_dma_waitforload(chan, __LINE__) == 0) {
+ /* flag error? */
+ printk(KERN_ERR "dma%d: timeout waiting for load (%s)\n",
+ chan->number, __FUNCTION__);
+ return;
+ }
+ break;
+
+ case S3C2410_DMALOAD_1LOADED_1RUNNING:
+ /* I belive in this case we do not have anything to do
+ * until the next buffer comes along, and we turn off the
+ * reload */
+ return;
+
+ default:
+ pr_debug("dma%d: lastxfer: unhandled load_state %d with no next\n",
+ chan->number, chan->load_state);
+ return;
+
+ }
+
+ /* hopefully this'll shut the damned thing up after the transfer... */
+ dma_wrreg(chan, S3C2410_DMA_DCON, chan->dcon | S3C2410_DCON_NORELOAD);
+}
+
+
+#define dmadbg2(x...)
+
+static irqreturn_t
+s3c2410_dma_irq(int irq, void *devpw)
+{
+ struct s3c2410_dma_chan *chan = (struct s3c2410_dma_chan *)devpw;
+ struct s3c2410_dma_buf *buf;
+
+ buf = chan->curr;
+
+ dbg_showchan(chan);
+
+ /* modify the channel state */
+
+ switch (chan->load_state) {
+ case S3C2410_DMALOAD_1RUNNING:
+ /* TODO - if we are running only one buffer, we probably
+ * want to reload here, and then worry about the buffer
+ * callback */
+
+ chan->load_state = S3C2410_DMALOAD_NONE;
+ break;
+
+ case S3C2410_DMALOAD_1LOADED:
+ /* iirc, we should go back to NONE loaded here, we
+ * had a buffer, and it was never verified as being
+ * loaded.
+ */
+
+ chan->load_state = S3C2410_DMALOAD_NONE;
+ break;
+
+ case S3C2410_DMALOAD_1LOADED_1RUNNING:
+ /* we'll worry about checking to see if another buffer is
+ * ready after we've called back the owner. This should
+ * ensure we do not wait around too long for the DMA
+ * engine to start the next transfer
+ */
+
+ chan->load_state = S3C2410_DMALOAD_1LOADED;
+ break;
+
+ case S3C2410_DMALOAD_NONE:
+ printk(KERN_ERR "dma%d: IRQ with no loaded buffer?\n",
+ chan->number);
+ break;
+
+ default:
+ printk(KERN_ERR "dma%d: IRQ in invalid load_state %d\n",
+ chan->number, chan->load_state);
+ break;
+ }
+
+ if (buf != NULL) {
+ /* update the chain to make sure that if we load any more
+ * buffers when we call the callback function, things should
+ * work properly */
+
+ chan->curr = buf->next;
+ buf->next = NULL;
+
+ if (buf->magic != BUF_MAGIC) {
+ printk(KERN_ERR "dma%d: %s: buf %p incorrect magic\n",
+ chan->number, __FUNCTION__, buf);
+ return IRQ_HANDLED;
+ }
+
+ s3c2410_dma_buffdone(chan, buf, S3C2410_RES_OK);
+
+ /* free resouces */
+ s3c2410_dma_freebuf(buf);
+ } else {
+ }
+
+ /* only reload if the channel is still running... our buffer done
+ * routine may have altered the state by requesting the dma channel
+ * to stop or shutdown... */
+
+ /* todo: check that when the channel is shut-down from inside this
+ * function, we cope with unsetting reload, etc */
+
+ if (chan->next != NULL && chan->state != S3C2410_DMA_IDLE) {
+ unsigned long flags;
+
+ switch (chan->load_state) {
+ case S3C2410_DMALOAD_1RUNNING:
+ /* don't need to do anything for this state */
+ break;
+
+ case S3C2410_DMALOAD_NONE:
+ /* can load buffer immediately */
+ break;
+
+ case S3C2410_DMALOAD_1LOADED:
+ if (s3c2410_dma_waitforload(chan, __LINE__) == 0) {
+ /* flag error? */
+ printk(KERN_ERR "dma%d: timeout waiting for load (%s)\n",
+ chan->number, __FUNCTION__);
+ return IRQ_HANDLED;
+ }
+
+ break;
+
+ case S3C2410_DMALOAD_1LOADED_1RUNNING:
+ goto no_load;
+
+ default:
+ printk(KERN_ERR "dma%d: unknown load_state in irq, %d\n",
+ chan->number, chan->load_state);
+ return IRQ_HANDLED;
+ }
+
+ local_irq_save(flags);
+ s3c2410_dma_loadbuffer(chan, chan->next);
+ local_irq_restore(flags);
+ } else {
+ s3c2410_dma_lastxfer(chan);
+
+ /* see if we can stop this channel.. */
+ if (chan->load_state == S3C2410_DMALOAD_NONE) {
+ pr_debug("dma%d: end of transfer, stopping channel (%ld)\n",
+ chan->number, jiffies);
+ s3c2410_dma_ctrl(chan->number | DMACH_LOW_LEVEL,
+ S3C2410_DMAOP_STOP);
+ }
+ }
+
+ no_load:
+ return IRQ_HANDLED;
+}
+
+static struct s3c2410_dma_chan *s3c2410_dma_map_channel(int channel);
+
+/* s3c2410_request_dma
+ *
+ * get control of an dma channel
+*/
+
+int s3c2410_dma_request(unsigned int channel,
+ struct s3c2410_dma_client *client,
+ void *dev)
+{
+ struct s3c2410_dma_chan *chan;
+ unsigned long flags;
+ int err;
+
+ pr_debug("dma%d: s3c2410_request_dma: client=%s, dev=%p\n",
+ channel, client->name, dev);
+
+ local_irq_save(flags);
+
+ chan = s3c2410_dma_map_channel(channel);
+ if (chan == NULL) {
+ local_irq_restore(flags);
+ return -EBUSY;
+ }
+
+ dbg_showchan(chan);
+
+ chan->client = client;
+ chan->in_use = 1;
+
+ if (!chan->irq_claimed) {
+ pr_debug("dma%d: %s : requesting irq %d\n",
+ channel, __FUNCTION__, chan->irq);
+
+ chan->irq_claimed = 1;
+ local_irq_restore(flags);
+
+ err = request_irq(chan->irq, s3c2410_dma_irq, IRQF_DISABLED,
+ client->name, (void *)chan);
+
+ local_irq_save(flags);
+
+ if (err) {
+ chan->in_use = 0;
+ chan->irq_claimed = 0;
+ local_irq_restore(flags);
+
+ printk(KERN_ERR "%s: cannot get IRQ %d for DMA %d\n",
+ client->name, chan->irq, chan->number);
+ return err;
+ }
+
+ chan->irq_enabled = 1;
+ }
+
+ local_irq_restore(flags);
+
+ /* need to setup */
+
+ pr_debug("%s: channel initialised, %p\n", __FUNCTION__, chan);
+
+ return 0;
+}
+
+EXPORT_SYMBOL(s3c2410_dma_request);
+
+/* s3c2410_dma_free
+ *
+ * release the given channel back to the system, will stop and flush
+ * any outstanding transfers, and ensure the channel is ready for the
+ * next claimant.
+ *
+ * Note, although a warning is currently printed if the freeing client
+ * info is not the same as the registrant's client info, the free is still
+ * allowed to go through.
+*/
+
+int s3c2410_dma_free(dmach_t channel, struct s3c2410_dma_client *client)
+{
+ struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
+ unsigned long flags;
+
+ if (chan == NULL)
+ return -EINVAL;
+
+ local_irq_save(flags);
+
+ if (chan->client != client) {
+ printk(KERN_WARNING "dma%d: possible free from different client (channel %p, passed %p)\n",
+ channel, chan->client, client);
+ }
+
+ /* sort out stopping and freeing the channel */
+
+ if (chan->state != S3C2410_DMA_IDLE) {
+ pr_debug("%s: need to stop dma channel %p\n",
+ __FUNCTION__, chan);
+
+ /* possibly flush the channel */
+ s3c2410_dma_ctrl(channel, S3C2410_DMAOP_STOP);
+ }
+
+ chan->client = NULL;
+ chan->in_use = 0;
+
+ if (chan->irq_claimed)
+ free_irq(chan->irq, (void *)chan);
+
+ chan->irq_claimed = 0;
+
+ if (!(channel & DMACH_LOW_LEVEL))
+ dma_chan_map[channel] = NULL;
+
+ local_irq_restore(flags);
+
+ return 0;
+}
+
+EXPORT_SYMBOL(s3c2410_dma_free);
+
+static int s3c2410_dma_dostop(struct s3c2410_dma_chan *chan)
+{
+ unsigned long flags;
+ unsigned long tmp;
+
+ pr_debug("%s:\n", __FUNCTION__);
+
+ dbg_showchan(chan);
+
+ local_irq_save(flags);
+
+ s3c2410_dma_call_op(chan, S3C2410_DMAOP_STOP);
+
+ tmp = dma_rdreg(chan, S3C2410_DMA_DMASKTRIG);
+ tmp |= S3C2410_DMASKTRIG_STOP;
+ //tmp &= ~S3C2410_DMASKTRIG_ON;
+ dma_wrreg(chan, S3C2410_DMA_DMASKTRIG, tmp);
+
+#if 0
+ /* should also clear interrupts, according to WinCE BSP */
+ tmp = dma_rdreg(chan, S3C2410_DMA_DCON);
+ tmp |= S3C2410_DCON_NORELOAD;
+ dma_wrreg(chan, S3C2410_DMA_DCON, tmp);
+#endif
+
+ /* should stop do this, or should we wait for flush? */
+ chan->state = S3C2410_DMA_IDLE;
+ chan->load_state = S3C2410_DMALOAD_NONE;
+
+ local_irq_restore(flags);
+
+ return 0;
+}
+
+void s3c2410_dma_waitforstop(struct s3c2410_dma_chan *chan)
+{
+ unsigned long tmp;
+ unsigned int timeout = 0x10000;
+
+ while (timeout-- > 0) {
+ tmp = dma_rdreg(chan, S3C2410_DMA_DMASKTRIG);
+
+ if (!(tmp & S3C2410_DMASKTRIG_ON))
+ return;
+ }
+
+ pr_debug("dma%d: failed to stop?\n", chan->number);
+}
+
+
+/* s3c2410_dma_flush
+ *
+ * stop the channel, and remove all current and pending transfers
+*/
+
+static int s3c2410_dma_flush(struct s3c2410_dma_chan *chan)
+{
+ struct s3c2410_dma_buf *buf, *next;
+ unsigned long flags;
+
+ pr_debug("%s: chan %p (%d)\n", __FUNCTION__, chan, chan->number);
+
+ dbg_showchan(chan);
+
+ local_irq_save(flags);
+
+ if (chan->state != S3C2410_DMA_IDLE) {
+ pr_debug("%s: stopping channel...\n", __FUNCTION__ );
+ s3c2410_dma_ctrl(chan->number, S3C2410_DMAOP_STOP);
+ }
+
+ buf = chan->curr;
+ if (buf == NULL)
+ buf = chan->next;
+
+ chan->curr = chan->next = chan->end = NULL;
+
+ if (buf != NULL) {
+ for ( ; buf != NULL; buf = next) {
+ next = buf->next;
+
+ pr_debug("%s: free buffer %p, next %p\n",
+ __FUNCTION__, buf, buf->next);
+
+ s3c2410_dma_buffdone(chan, buf, S3C2410_RES_ABORT);
+ s3c2410_dma_freebuf(buf);
+ }
+ }
+
+ dbg_showregs(chan);
+
+ s3c2410_dma_waitforstop(chan);
+
+#if 0
+ /* should also clear interrupts, according to WinCE BSP */
+ {
+ unsigned long tmp;
+
+ tmp = dma_rdreg(chan, S3C2410_DMA_DCON);
+ tmp |= S3C2410_DCON_NORELOAD;
+ dma_wrreg(chan, S3C2410_DMA_DCON, tmp);
+ }
+#endif
+
+ dbg_showregs(chan);
+
+ local_irq_restore(flags);
+
+ return 0;
+}
+
+int
+s3c2410_dma_started(struct s3c2410_dma_chan *chan)
+{
+ unsigned long flags;
+
+ local_irq_save(flags);
+
+ dbg_showchan(chan);
+
+ /* if we've only loaded one buffer onto the channel, then chec
+ * to see if we have another, and if so, try and load it so when
+ * the first buffer is finished, the new one will be loaded onto
+ * the channel */
+
+ if (chan->next != NULL) {
+ if (chan->load_state == S3C2410_DMALOAD_1LOADED) {
+
+ if (s3c2410_dma_waitforload(chan, __LINE__) == 0) {
+ pr_debug("%s: buff not yet loaded, no more todo\n",
+ __FUNCTION__);
+ } else {
+ chan->load_state = S3C2410_DMALOAD_1RUNNING;
+ s3c2410_dma_loadbuffer(chan, chan->next);
+ }
+
+ } else if (chan->load_state == S3C2410_DMALOAD_1RUNNING) {
+ s3c2410_dma_loadbuffer(chan, chan->next);
+ }
+ }
+
+
+ local_irq_restore(flags);
+
+ return 0;
+
+}
+
+int
+s3c2410_dma_ctrl(dmach_t channel, enum s3c2410_chan_op op)
+{
+ struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
+
+ if (chan == NULL)
+ return -EINVAL;
+
+ switch (op) {
+ case S3C2410_DMAOP_START:
+ return s3c2410_dma_start(chan);
+
+ case S3C2410_DMAOP_STOP:
+ return s3c2410_dma_dostop(chan);
+
+ case S3C2410_DMAOP_PAUSE:
+ case S3C2410_DMAOP_RESUME:
+ return -ENOENT;
+
+ case S3C2410_DMAOP_FLUSH:
+ return s3c2410_dma_flush(chan);
+
+ case S3C2410_DMAOP_STARTED:
+ return s3c2410_dma_started(chan);
+
+ case S3C2410_DMAOP_TIMEOUT:
+ return 0;
+
+ }
+
+ return -ENOENT; /* unknown, don't bother */
+}
+
+EXPORT_SYMBOL(s3c2410_dma_ctrl);
+
+/* DMA configuration for each channel
+ *
+ * DISRCC -> source of the DMA (AHB,APB)
+ * DISRC -> source address of the DMA
+ * DIDSTC -> destination of the DMA (AHB,APD)
+ * DIDST -> destination address of the DMA
+*/
+
+/* s3c2410_dma_config
+ *
+ * xfersize: size of unit in bytes (1,2,4)
+ * dcon: base value of the DCONx register
+*/
+
+int s3c2410_dma_config(dmach_t channel,
+ int xferunit,
+ int dcon)
+{
+ struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
+
+ pr_debug("%s: chan=%d, xfer_unit=%d, dcon=%08x\n",
+ __FUNCTION__, channel, xferunit, dcon);
+
+ if (chan == NULL)
+ return -EINVAL;
+
+ pr_debug("%s: Initial dcon is %08x\n", __FUNCTION__, dcon);
+
+ dcon |= chan->dcon & dma_sel.dcon_mask;
+
+ pr_debug("%s: New dcon is %08x\n", __FUNCTION__, dcon);
+
+ switch (xferunit) {
+ case 1:
+ dcon |= S3C2410_DCON_BYTE;
+ break;
+
+ case 2:
+ dcon |= S3C2410_DCON_HALFWORD;
+ break;
+
+ case 4:
+ dcon |= S3C2410_DCON_WORD;
+ break;
+
+ default:
+ pr_debug("%s: bad transfer size %d\n", __FUNCTION__, xferunit);
+ return -EINVAL;
+ }
+
+ dcon |= S3C2410_DCON_HWTRIG;
+ dcon |= S3C2410_DCON_INTREQ;
+
+ pr_debug("%s: dcon now %08x\n", __FUNCTION__, dcon);
+
+ chan->dcon = dcon;
+ chan->xfer_unit = xferunit;
+
+ return 0;
+}
+
+EXPORT_SYMBOL(s3c2410_dma_config);
+
+int s3c2410_dma_setflags(dmach_t channel, unsigned int flags)
+{
+ struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
+
+ if (chan == NULL)
+ return -EINVAL;
+
+ pr_debug("%s: chan=%p, flags=%08x\n", __FUNCTION__, chan, flags);
+
+ chan->flags = flags;
+
+ return 0;
+}
+
+EXPORT_SYMBOL(s3c2410_dma_setflags);
+
+
+/* do we need to protect the settings of the fields from
+ * irq?
+*/
+
+int s3c2410_dma_set_opfn(dmach_t channel, s3c2410_dma_opfn_t rtn)
+{
+ struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
+
+ if (chan == NULL)
+ return -EINVAL;
+
+ pr_debug("%s: chan=%p, op rtn=%p\n", __FUNCTION__, chan, rtn);
+
+ chan->op_fn = rtn;
+
+ return 0;
+}
+
+EXPORT_SYMBOL(s3c2410_dma_set_opfn);
+
+int s3c2410_dma_set_buffdone_fn(dmach_t channel, s3c2410_dma_cbfn_t rtn)
+{
+ struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
+
+ if (chan == NULL)
+ return -EINVAL;
+
+ pr_debug("%s: chan=%p, callback rtn=%p\n", __FUNCTION__, chan, rtn);
+
+ chan->callback_fn = rtn;
+
+ return 0;
+}
+
+EXPORT_SYMBOL(s3c2410_dma_set_buffdone_fn);
+
+/* s3c2410_dma_devconfig
+ *
+ * configure the dma source/destination hardware type and address
+ *
+ * source: S3C2410_DMASRC_HW: source is hardware
+ * S3C2410_DMASRC_MEM: source is memory
+ *
+ * hwcfg: the value for xxxSTCn register,
+ * bit 0: 0=increment pointer, 1=leave pointer
+ * bit 1: 0=soucre is AHB, 1=soucre is APB
+ *
+ * devaddr: physical address of the source
+*/
+
+int s3c2410_dma_devconfig(int channel,
+ enum s3c2410_dmasrc source,
+ int hwcfg,
+ unsigned long devaddr)
+{
+ struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
+
+ if (chan == NULL)
+ return -EINVAL;
+
+ pr_debug("%s: source=%d, hwcfg=%08x, devaddr=%08lx\n",
+ __FUNCTION__, (int)source, hwcfg, devaddr);
+
+ chan->source = source;
+ chan->dev_addr = devaddr;
+
+ switch (source) {
+ case S3C2410_DMASRC_HW:
+ /* source is hardware */
+ pr_debug("%s: hw source, devaddr=%08lx, hwcfg=%d\n",
+ __FUNCTION__, devaddr, hwcfg);
+ dma_wrreg(chan, S3C2410_DMA_DISRCC, hwcfg & 3);
+ dma_wrreg(chan, S3C2410_DMA_DISRC, devaddr);
+ dma_wrreg(chan, S3C2410_DMA_DIDSTC, (0<<1) | (0<<0));
+
+ chan->addr_reg = dma_regaddr(chan, S3C2410_DMA_DIDST);
+ return 0;
+
+ case S3C2410_DMASRC_MEM:
+ /* source is memory */
+ pr_debug( "%s: mem source, devaddr=%08lx, hwcfg=%d\n",
+ __FUNCTION__, devaddr, hwcfg);
+ dma_wrreg(chan, S3C2410_DMA_DISRCC, (0<<1) | (0<<0));
+ dma_wrreg(chan, S3C2410_DMA_DIDST, devaddr);
+ dma_wrreg(chan, S3C2410_DMA_DIDSTC, hwcfg & 3);
+
+ chan->addr_reg = dma_regaddr(chan, S3C2410_DMA_DISRC);
+ return 0;
+ }
+
+ printk(KERN_ERR "dma%d: invalid source type (%d)\n", channel, source);
+ return -EINVAL;
+}
+
+EXPORT_SYMBOL(s3c2410_dma_devconfig);
+
+/* s3c2410_dma_getposition
+ *
+ * returns the current transfer points for the dma source and destination
+*/
+
+int s3c2410_dma_getposition(dmach_t channel, dma_addr_t *src, dma_addr_t *dst)
+{
+ struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
+
+ if (chan == NULL)
+ return -EINVAL;
+
+ if (src != NULL)
+ *src = dma_rdreg(chan, S3C2410_DMA_DCSRC);
+
+ if (dst != NULL)
+ *dst = dma_rdreg(chan, S3C2410_DMA_DCDST);
+
+ return 0;
+}
+
+EXPORT_SYMBOL(s3c2410_dma_getposition);
+
+
+/* system device class */
+
+#ifdef CONFIG_PM
+
+static int s3c2410_dma_suspend(struct sys_device *dev, pm_message_t state)
+{
+ struct s3c2410_dma_chan *cp = container_of(dev, struct s3c2410_dma_chan, dev);
+
+ printk(KERN_DEBUG "suspending dma channel %d\n", cp->number);
+
+ if (dma_rdreg(cp, S3C2410_DMA_DMASKTRIG) & S3C2410_DMASKTRIG_ON) {
+ /* the dma channel is still working, which is probably
+ * a bad thing to do over suspend/resume. We stop the
+ * channel and assume that the client is either going to
+ * retry after resume, or that it is broken.
+ */
+
+ printk(KERN_INFO "dma: stopping channel %d due to suspend\n",
+ cp->number);
+
+ s3c2410_dma_dostop(cp);
+ }
+
+ return 0;
+}
+
+static int s3c2410_dma_resume(struct sys_device *dev)
+{
+ return 0;
+}
+
+#else
+#define s3c2410_dma_suspend NULL
+#define s3c2410_dma_resume NULL
+#endif /* CONFIG_PM */
+
+struct sysdev_class dma_sysclass = {
+ set_kset_name("s3c24xx-dma"),
+ .suspend = s3c2410_dma_suspend,
+ .resume = s3c2410_dma_resume,
+};
+
+/* kmem cache implementation */
+
+static void s3c2410_dma_cache_ctor(void *p, struct kmem_cache *c, unsigned long f)
+{
+ memset(p, 0, sizeof(struct s3c2410_dma_buf));
+}
+
+/* initialisation code */
+
+int __init s3c24xx_dma_sysclass_init(void)
+{
+ int ret = sysdev_class_register(&dma_sysclass);
+
+ if (ret != 0)
+ printk(KERN_ERR "dma sysclass registration failed\n");
+
+ return ret;
+}
+
+core_initcall(s3c24xx_dma_sysclass_init);
+
+int __init s3c24xx_dma_sysdev_register(void)
+{
+ struct s3c2410_dma_chan *cp = s3c2410_chans;
+ int channel, ret;
+
+ for (channel = 0; channel < dma_channels; cp++, channel++) {
+ cp->dev.cls = &dma_sysclass;
+ cp->dev.id = channel;
+ ret = sysdev_register(&cp->dev);
+
+ if (ret) {
+ printk(KERN_ERR "error registering dev for dma %d\n",
+ channel);
+ return ret;
+ }
+ }
+
+ return 0;
+}
+
+late_initcall(s3c24xx_dma_sysdev_register);
+
+int __init s3c24xx_dma_init(unsigned int channels, unsigned int irq,
+ unsigned int stride)
+{
+ struct s3c2410_dma_chan *cp;
+ int channel;
+ int ret;
+
+ printk("S3C24XX DMA Driver, (c) 2003-2004,2006 Simtec Electronics\n");
+
+ dma_channels = channels;
+
+ dma_base = ioremap(S3C24XX_PA_DMA, stride * channels);
+ if (dma_base == NULL) {
+ printk(KERN_ERR "dma failed to remap register block\n");
+ return -ENOMEM;
+ }
+
+ dma_kmem = kmem_cache_create("dma_desc",
+ sizeof(struct s3c2410_dma_buf), 0,
+ SLAB_HWCACHE_ALIGN,
+ s3c2410_dma_cache_ctor, NULL);
+
+ if (dma_kmem == NULL) {
+ printk(KERN_ERR "dma failed to make kmem cache\n");
+ ret = -ENOMEM;
+ goto err;
+ }
+
+ for (channel = 0; channel < channels; channel++) {
+ cp = &s3c2410_chans[channel];
+
+ memset(cp, 0, sizeof(struct s3c2410_dma_chan));
+
+ /* dma channel irqs are in order.. */
+ cp->number = channel;
+ cp->irq = channel + irq;
+ cp->regs = dma_base + (channel * stride);
+
+ /* point current stats somewhere */
+ cp->stats = &cp->stats_store;
+ cp->stats_store.timeout_shortest = LONG_MAX;
+
+ /* basic channel configuration */
+
+ cp->load_timeout = 1<<18;
+
+ printk("DMA channel %d at %p, irq %d\n",
+ cp->number, cp->regs, cp->irq);
+ }
+
+ return 0;
+
+ err:
+ kmem_cache_destroy(dma_kmem);
+ iounmap(dma_base);
+ dma_base = NULL;
+ return ret;
+}
+
+int s3c2410_dma_init(void)
+{
+ return s3c24xx_dma_init(4, IRQ_DMA0, 0x40);
+}
+
+static inline int is_channel_valid(unsigned int channel)
+{
+ return (channel & DMA_CH_VALID);
+}
+
+static struct s3c24xx_dma_order *dma_order;
+
+
+/* s3c2410_dma_map_channel()
+ *
+ * turn the virtual channel number into a real, and un-used hardware
+ * channel.
+ *
+ * first, try the dma ordering given to us by either the relevant
+ * dma code, or the board. Then just find the first usable free
+ * channel
+*/
+
+struct s3c2410_dma_chan *s3c2410_dma_map_channel(int channel)
+{
+ struct s3c24xx_dma_order_ch *ord = NULL;
+ struct s3c24xx_dma_map *ch_map;
+ struct s3c2410_dma_chan *dmach;
+ int ch;
+
+ if (dma_sel.map == NULL || channel > dma_sel.map_size)
+ return NULL;
+
+ ch_map = dma_sel.map + channel;
+
+ /* first, try the board mapping */
+
+ if (dma_order) {
+ ord = &dma_order->channels[channel];
+
+ for (ch = 0; ch < dma_channels; ch++) {
+ if (!is_channel_valid(ord->list[ch]))
+ continue;
+
+ if (s3c2410_chans[ord->list[ch]].in_use == 0) {
+ ch = ord->list[ch] & ~DMA_CH_VALID;
+ goto found;
+ }
+ }
+
+ if (ord->flags & DMA_CH_NEVER)
+ return NULL;
+ }
+
+ /* second, search the channel map for first free */
+
+ for (ch = 0; ch < dma_channels; ch++) {
+ if (!is_channel_valid(ch_map->channels[ch]))
+ continue;
+
+ if (s3c2410_chans[ch].in_use == 0) {
+ printk("mapped channel %d to %d\n", channel, ch);
+ break;
+ }
+ }
+
+ if (ch >= dma_channels)
+ return NULL;
+
+ /* update our channel mapping */
+
+ found:
+ dmach = &s3c2410_chans[ch];
+ dma_chan_map[channel] = dmach;
+
+ /* select the channel */
+
+ (dma_sel.select)(dmach, ch_map);
+
+ return dmach;
+}
+
+static int s3c24xx_dma_check_entry(struct s3c24xx_dma_map *map, int ch)
+{
+ return 0;
+}
+
+int __init s3c24xx_dma_init_map(struct s3c24xx_dma_selection *sel)
+{
+ struct s3c24xx_dma_map *nmap;
+ size_t map_sz = sizeof(*nmap) * sel->map_size;
+ int ptr;
+
+ nmap = kmalloc(map_sz, GFP_KERNEL);
+ if (nmap == NULL)
+ return -ENOMEM;
+
+ memcpy(nmap, sel->map, map_sz);
+ memcpy(&dma_sel, sel, sizeof(*sel));
+
+ dma_sel.map = nmap;
+
+ for (ptr = 0; ptr < sel->map_size; ptr++)
+ s3c24xx_dma_check_entry(nmap+ptr, ptr);
+
+ return 0;
+}
+
+int __init s3c24xx_dma_order_set(struct s3c24xx_dma_order *ord)
+{
+ struct s3c24xx_dma_order *nord = dma_order;
+
+ if (nord == NULL)
+ nord = kmalloc(sizeof(struct s3c24xx_dma_order), GFP_KERNEL);
+
+ if (nord == NULL) {
+ printk(KERN_ERR "no memory to store dma channel order\n");
+ return -ENOMEM;
+ }
+
+ dma_order = nord;
+ memcpy(nord, ord, sizeof(struct s3c24xx_dma_order));
+ return 0;
+}
--- /dev/null
+/* linux/arch/arm/plat-s3c24xx/gpio.c
+ *
+ * Copyright (c) 2004-2005 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C24XX GPIO support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+*/
+
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+
+#include <asm/hardware.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+
+#include <asm/arch/regs-gpio.h>
+
+void s3c2410_gpio_cfgpin(unsigned int pin, unsigned int function)
+{
+ void __iomem *base = S3C24XX_GPIO_BASE(pin);
+ unsigned long mask;
+ unsigned long con;
+ unsigned long flags;
+
+ if (pin < S3C2410_GPIO_BANKB) {
+ mask = 1 << S3C2410_GPIO_OFFSET(pin);
+ } else {
+ mask = 3 << S3C2410_GPIO_OFFSET(pin)*2;
+ }
+
+ switch (function) {
+ case S3C2410_GPIO_LEAVE:
+ mask = 0;
+ function = 0;
+ break;
+
+ case S3C2410_GPIO_INPUT:
+ case S3C2410_GPIO_OUTPUT:
+ case S3C2410_GPIO_SFN2:
+ case S3C2410_GPIO_SFN3:
+ if (pin < S3C2410_GPIO_BANKB) {
+ function -= 1;
+ function &= 1;
+ function <<= S3C2410_GPIO_OFFSET(pin);
+ } else {
+ function &= 3;
+ function <<= S3C2410_GPIO_OFFSET(pin)*2;
+ }
+ }
+
+ /* modify the specified register wwith IRQs off */
+
+ local_irq_save(flags);
+
+ con = __raw_readl(base + 0x00);
+ con &= ~mask;
+ con |= function;
+
+ __raw_writel(con, base + 0x00);
+
+ local_irq_restore(flags);
+}
+
+EXPORT_SYMBOL(s3c2410_gpio_cfgpin);
+
+unsigned int s3c2410_gpio_getcfg(unsigned int pin)
+{
+ void __iomem *base = S3C24XX_GPIO_BASE(pin);
+ unsigned long val = __raw_readl(base);
+
+ if (pin < S3C2410_GPIO_BANKB) {
+ val >>= S3C2410_GPIO_OFFSET(pin);
+ val &= 1;
+ val += 1;
+ } else {
+ val >>= S3C2410_GPIO_OFFSET(pin)*2;
+ val &= 3;
+ }
+
+ return val | S3C2410_GPIO_INPUT;
+}
+
+EXPORT_SYMBOL(s3c2410_gpio_getcfg);
+
+void s3c2410_gpio_pullup(unsigned int pin, unsigned int to)
+{
+ void __iomem *base = S3C24XX_GPIO_BASE(pin);
+ unsigned long offs = S3C2410_GPIO_OFFSET(pin);
+ unsigned long flags;
+ unsigned long up;
+
+ if (pin < S3C2410_GPIO_BANKB)
+ return;
+
+ local_irq_save(flags);
+
+ up = __raw_readl(base + 0x08);
+ up &= ~(1L << offs);
+ up |= to << offs;
+ __raw_writel(up, base + 0x08);
+
+ local_irq_restore(flags);
+}
+
+EXPORT_SYMBOL(s3c2410_gpio_pullup);
+
+void s3c2410_gpio_setpin(unsigned int pin, unsigned int to)
+{
+ void __iomem *base = S3C24XX_GPIO_BASE(pin);
+ unsigned long offs = S3C2410_GPIO_OFFSET(pin);
+ unsigned long flags;
+ unsigned long dat;
+
+ local_irq_save(flags);
+
+ dat = __raw_readl(base + 0x04);
+ dat &= ~(1 << offs);
+ dat |= to << offs;
+ __raw_writel(dat, base + 0x04);
+
+ local_irq_restore(flags);
+}
+
+EXPORT_SYMBOL(s3c2410_gpio_setpin);
+
+unsigned int s3c2410_gpio_getpin(unsigned int pin)
+{
+ void __iomem *base = S3C24XX_GPIO_BASE(pin);
+ unsigned long offs = S3C2410_GPIO_OFFSET(pin);
+
+ return __raw_readl(base + 0x04) & (1<< offs);
+}
+
+EXPORT_SYMBOL(s3c2410_gpio_getpin);
+
+unsigned int s3c2410_modify_misccr(unsigned int clear, unsigned int change)
+{
+ unsigned long flags;
+ unsigned long misccr;
+
+ local_irq_save(flags);
+ misccr = __raw_readl(S3C24XX_MISCCR);
+ misccr &= ~clear;
+ misccr ^= change;
+ __raw_writel(misccr, S3C24XX_MISCCR);
+ local_irq_restore(flags);
+
+ return misccr;
+}
+
+EXPORT_SYMBOL(s3c2410_modify_misccr);
+
+int s3c2410_gpio_getirq(unsigned int pin)
+{
+ if (pin < S3C2410_GPF0 || pin > S3C2410_GPG15)
+ return -1; /* not valid interrupts */
+
+ if (pin < S3C2410_GPG0 && pin > S3C2410_GPF7)
+ return -1; /* not valid pin */
+
+ if (pin < S3C2410_GPF4)
+ return (pin - S3C2410_GPF0) + IRQ_EINT0;
+
+ if (pin < S3C2410_GPG0)
+ return (pin - S3C2410_GPF4) + IRQ_EINT4;
+
+ return (pin - S3C2410_GPG0) + IRQ_EINT8;
+}
+
+EXPORT_SYMBOL(s3c2410_gpio_getirq);
--- /dev/null
+/* linux/arch/arm/plat-s3c24xx/irq.c
+ *
+ * Copyright (c) 2003,2004 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * Changelog:
+ *
+ * 22-Jul-2004 Ben Dooks <ben@simtec.co.uk>
+ * Fixed compile warnings
+ *
+ * 22-Jul-2004 Roc Wu <cooloney@yahoo.com.cn>
+ * Fixed s3c_extirq_type
+ *
+ * 21-Jul-2004 Arnaud Patard (Rtp) <arnaud.patard@rtp-net.org>
+ * Addition of ADC/TC demux
+ *
+ * 04-Oct-2004 Klaus Fetscher <k.fetscher@fetron.de>
+ * Fix for set_irq_type() on low EINT numbers
+ *
+ * 05-Oct-2004 Ben Dooks <ben@simtec.co.uk>
+ * Tidy up KF's patch and sort out new release
+ *
+ * 05-Oct-2004 Ben Dooks <ben@simtec.co.uk>
+ * Add support for power management controls
+ *
+ * 04-Nov-2004 Ben Dooks
+ * Fix standard IRQ wake for EINT0..4 and RTC
+ *
+ * 22-Feb-2005 Ben Dooks
+ * Fixed edge-triggering on ADC IRQ
+ *
+ * 28-Jun-2005 Ben Dooks
+ * Mark IRQ_LCD valid
+ *
+ * 25-Jul-2005 Ben Dooks
+ * Split the S3C2440 IRQ code to seperate file
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/ptrace.h>
+#include <linux/sysdev.h>
+
+#include <asm/hardware.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+
+#include <asm/mach/irq.h>
+
+#include <asm/arch/regs-irq.h>
+#include <asm/arch/regs-gpio.h>
+
+#include <asm/plat-s3c24xx/cpu.h>
+#include <asm/plat-s3c24xx/pm.h>
+#include <asm/plat-s3c24xx/irq.h>
+
+/* wakeup irq control */
+
+#ifdef CONFIG_PM
+
+/* state for IRQs over sleep */
+
+/* default is to allow for EINT0..EINT15, and IRQ_RTC as wakeup sources
+ *
+ * set bit to 1 in allow bitfield to enable the wakeup settings on it
+*/
+
+unsigned long s3c_irqwake_intallow = 1L << (IRQ_RTC - IRQ_EINT0) | 0xfL;
+unsigned long s3c_irqwake_intmask = 0xffffffffL;
+unsigned long s3c_irqwake_eintallow = 0x0000fff0L;
+unsigned long s3c_irqwake_eintmask = 0xffffffffL;
+
+int
+s3c_irq_wake(unsigned int irqno, unsigned int state)
+{
+ unsigned long irqbit = 1 << (irqno - IRQ_EINT0);
+
+ if (!(s3c_irqwake_intallow & irqbit))
+ return -ENOENT;
+
+ printk(KERN_INFO "wake %s for irq %d\n",
+ state ? "enabled" : "disabled", irqno);
+
+ if (!state)
+ s3c_irqwake_intmask |= irqbit;
+ else
+ s3c_irqwake_intmask &= ~irqbit;
+
+ return 0;
+}
+
+static int
+s3c_irqext_wake(unsigned int irqno, unsigned int state)
+{
+ unsigned long bit = 1L << (irqno - EXTINT_OFF);
+
+ if (!(s3c_irqwake_eintallow & bit))
+ return -ENOENT;
+
+ printk(KERN_INFO "wake %s for irq %d\n",
+ state ? "enabled" : "disabled", irqno);
+
+ if (!state)
+ s3c_irqwake_eintmask |= bit;
+ else
+ s3c_irqwake_eintmask &= ~bit;
+
+ return 0;
+}
+
+#else
+#define s3c_irqext_wake NULL
+#define s3c_irq_wake NULL
+#endif
+
+
+static void
+s3c_irq_mask(unsigned int irqno)
+{
+ unsigned long mask;
+
+ irqno -= IRQ_EINT0;
+
+ mask = __raw_readl(S3C2410_INTMSK);
+ mask |= 1UL << irqno;
+ __raw_writel(mask, S3C2410_INTMSK);
+}
+
+static inline void
+s3c_irq_ack(unsigned int irqno)
+{
+ unsigned long bitval = 1UL << (irqno - IRQ_EINT0);
+
+ __raw_writel(bitval, S3C2410_SRCPND);
+ __raw_writel(bitval, S3C2410_INTPND);
+}
+
+static inline void
+s3c_irq_maskack(unsigned int irqno)
+{
+ unsigned long bitval = 1UL << (irqno - IRQ_EINT0);
+ unsigned long mask;
+
+ mask = __raw_readl(S3C2410_INTMSK);
+ __raw_writel(mask|bitval, S3C2410_INTMSK);
+
+ __raw_writel(bitval, S3C2410_SRCPND);
+ __raw_writel(bitval, S3C2410_INTPND);
+}
+
+
+static void
+s3c_irq_unmask(unsigned int irqno)
+{
+ unsigned long mask;
+
+ if (irqno != IRQ_TIMER4 && irqno != IRQ_EINT8t23)
+ irqdbf2("s3c_irq_unmask %d\n", irqno);
+
+ irqno -= IRQ_EINT0;
+
+ mask = __raw_readl(S3C2410_INTMSK);
+ mask &= ~(1UL << irqno);
+ __raw_writel(mask, S3C2410_INTMSK);
+}
+
+struct irq_chip s3c_irq_level_chip = {
+ .name = "s3c-level",
+ .ack = s3c_irq_maskack,
+ .mask = s3c_irq_mask,
+ .unmask = s3c_irq_unmask,
+ .set_wake = s3c_irq_wake
+};
+
+static struct irq_chip s3c_irq_chip = {
+ .name = "s3c",
+ .ack = s3c_irq_ack,
+ .mask = s3c_irq_mask,
+ .unmask = s3c_irq_unmask,
+ .set_wake = s3c_irq_wake
+};
+
+static void
+s3c_irqext_mask(unsigned int irqno)
+{
+ unsigned long mask;
+
+ irqno -= EXTINT_OFF;
+
+ mask = __raw_readl(S3C24XX_EINTMASK);
+ mask |= ( 1UL << irqno);
+ __raw_writel(mask, S3C24XX_EINTMASK);
+}
+
+static void
+s3c_irqext_ack(unsigned int irqno)
+{
+ unsigned long req;
+ unsigned long bit;
+ unsigned long mask;
+
+ bit = 1UL << (irqno - EXTINT_OFF);
+
+ mask = __raw_readl(S3C24XX_EINTMASK);
+
+ __raw_writel(bit, S3C24XX_EINTPEND);
+
+ req = __raw_readl(S3C24XX_EINTPEND);
+ req &= ~mask;
+
+ /* not sure if we should be acking the parent irq... */
+
+ if (irqno <= IRQ_EINT7 ) {
+ if ((req & 0xf0) == 0)
+ s3c_irq_ack(IRQ_EINT4t7);
+ } else {
+ if ((req >> 8) == 0)
+ s3c_irq_ack(IRQ_EINT8t23);
+ }
+}
+
+static void
+s3c_irqext_unmask(unsigned int irqno)
+{
+ unsigned long mask;
+
+ irqno -= EXTINT_OFF;
+
+ mask = __raw_readl(S3C24XX_EINTMASK);
+ mask &= ~( 1UL << irqno);
+ __raw_writel(mask, S3C24XX_EINTMASK);
+}
+
+int
+s3c_irqext_type(unsigned int irq, unsigned int type)
+{
+ void __iomem *extint_reg;
+ void __iomem *gpcon_reg;
+ unsigned long gpcon_offset, extint_offset;
+ unsigned long newvalue = 0, value;
+
+ if ((irq >= IRQ_EINT0) && (irq <= IRQ_EINT3))
+ {
+ gpcon_reg = S3C2410_GPFCON;
+ extint_reg = S3C24XX_EXTINT0;
+ gpcon_offset = (irq - IRQ_EINT0) * 2;
+ extint_offset = (irq - IRQ_EINT0) * 4;
+ }
+ else if ((irq >= IRQ_EINT4) && (irq <= IRQ_EINT7))
+ {
+ gpcon_reg = S3C2410_GPFCON;
+ extint_reg = S3C24XX_EXTINT0;
+ gpcon_offset = (irq - (EXTINT_OFF)) * 2;
+ extint_offset = (irq - (EXTINT_OFF)) * 4;
+ }
+ else if ((irq >= IRQ_EINT8) && (irq <= IRQ_EINT15))
+ {
+ gpcon_reg = S3C2410_GPGCON;
+ extint_reg = S3C24XX_EXTINT1;
+ gpcon_offset = (irq - IRQ_EINT8) * 2;
+ extint_offset = (irq - IRQ_EINT8) * 4;
+ }
+ else if ((irq >= IRQ_EINT16) && (irq <= IRQ_EINT23))
+ {
+ gpcon_reg = S3C2410_GPGCON;
+ extint_reg = S3C24XX_EXTINT2;
+ gpcon_offset = (irq - IRQ_EINT8) * 2;
+ extint_offset = (irq - IRQ_EINT16) * 4;
+ } else
+ return -1;
+
+ /* Set the GPIO to external interrupt mode */
+ value = __raw_readl(gpcon_reg);
+ value = (value & ~(3 << gpcon_offset)) | (0x02 << gpcon_offset);
+ __raw_writel(value, gpcon_reg);
+
+ /* Set the external interrupt to pointed trigger type */
+ switch (type)
+ {
+ case IRQT_NOEDGE:
+ printk(KERN_WARNING "No edge setting!\n");
+ break;
+
+ case IRQT_RISING:
+ newvalue = S3C2410_EXTINT_RISEEDGE;
+ break;
+
+ case IRQT_FALLING:
+ newvalue = S3C2410_EXTINT_FALLEDGE;
+ break;
+
+ case IRQT_BOTHEDGE:
+ newvalue = S3C2410_EXTINT_BOTHEDGE;
+ break;
+
+ case IRQT_LOW:
+ newvalue = S3C2410_EXTINT_LOWLEV;
+ break;
+
+ case IRQT_HIGH:
+ newvalue = S3C2410_EXTINT_HILEV;
+ break;
+
+ default:
+ printk(KERN_ERR "No such irq type %d", type);
+ return -1;
+ }
+
+ value = __raw_readl(extint_reg);
+ value = (value & ~(7 << extint_offset)) | (newvalue << extint_offset);
+ __raw_writel(value, extint_reg);
+
+ return 0;
+}
+
+static struct irq_chip s3c_irqext_chip = {
+ .name = "s3c-ext",
+ .mask = s3c_irqext_mask,
+ .unmask = s3c_irqext_unmask,
+ .ack = s3c_irqext_ack,
+ .set_type = s3c_irqext_type,
+ .set_wake = s3c_irqext_wake
+};
+
+static struct irq_chip s3c_irq_eint0t4 = {
+ .name = "s3c-ext0",
+ .ack = s3c_irq_ack,
+ .mask = s3c_irq_mask,
+ .unmask = s3c_irq_unmask,
+ .set_wake = s3c_irq_wake,
+ .set_type = s3c_irqext_type,
+};
+
+/* mask values for the parent registers for each of the interrupt types */
+
+#define INTMSK_UART0 (1UL << (IRQ_UART0 - IRQ_EINT0))
+#define INTMSK_UART1 (1UL << (IRQ_UART1 - IRQ_EINT0))
+#define INTMSK_UART2 (1UL << (IRQ_UART2 - IRQ_EINT0))
+#define INTMSK_ADCPARENT (1UL << (IRQ_ADCPARENT - IRQ_EINT0))
+
+
+/* UART0 */
+
+static void
+s3c_irq_uart0_mask(unsigned int irqno)
+{
+ s3c_irqsub_mask(irqno, INTMSK_UART0, 7);
+}
+
+static void
+s3c_irq_uart0_unmask(unsigned int irqno)
+{
+ s3c_irqsub_unmask(irqno, INTMSK_UART0);
+}
+
+static void
+s3c_irq_uart0_ack(unsigned int irqno)
+{
+ s3c_irqsub_maskack(irqno, INTMSK_UART0, 7);
+}
+
+static struct irq_chip s3c_irq_uart0 = {
+ .name = "s3c-uart0",
+ .mask = s3c_irq_uart0_mask,
+ .unmask = s3c_irq_uart0_unmask,
+ .ack = s3c_irq_uart0_ack,
+};
+
+/* UART1 */
+
+static void
+s3c_irq_uart1_mask(unsigned int irqno)
+{
+ s3c_irqsub_mask(irqno, INTMSK_UART1, 7 << 3);
+}
+
+static void
+s3c_irq_uart1_unmask(unsigned int irqno)
+{
+ s3c_irqsub_unmask(irqno, INTMSK_UART1);
+}
+
+static void
+s3c_irq_uart1_ack(unsigned int irqno)
+{
+ s3c_irqsub_maskack(irqno, INTMSK_UART1, 7 << 3);
+}
+
+static struct irq_chip s3c_irq_uart1 = {
+ .name = "s3c-uart1",
+ .mask = s3c_irq_uart1_mask,
+ .unmask = s3c_irq_uart1_unmask,
+ .ack = s3c_irq_uart1_ack,
+};
+
+/* UART2 */
+
+static void
+s3c_irq_uart2_mask(unsigned int irqno)
+{
+ s3c_irqsub_mask(irqno, INTMSK_UART2, 7 << 6);
+}
+
+static void
+s3c_irq_uart2_unmask(unsigned int irqno)
+{
+ s3c_irqsub_unmask(irqno, INTMSK_UART2);
+}
+
+static void
+s3c_irq_uart2_ack(unsigned int irqno)
+{
+ s3c_irqsub_maskack(irqno, INTMSK_UART2, 7 << 6);
+}
+
+static struct irq_chip s3c_irq_uart2 = {
+ .name = "s3c-uart2",
+ .mask = s3c_irq_uart2_mask,
+ .unmask = s3c_irq_uart2_unmask,
+ .ack = s3c_irq_uart2_ack,
+};
+
+/* ADC and Touchscreen */
+
+static void
+s3c_irq_adc_mask(unsigned int irqno)
+{
+ s3c_irqsub_mask(irqno, INTMSK_ADCPARENT, 3 << 9);
+}
+
+static void
+s3c_irq_adc_unmask(unsigned int irqno)
+{
+ s3c_irqsub_unmask(irqno, INTMSK_ADCPARENT);
+}
+
+static void
+s3c_irq_adc_ack(unsigned int irqno)
+{
+ s3c_irqsub_ack(irqno, INTMSK_ADCPARENT, 3 << 9);
+}
+
+static struct irq_chip s3c_irq_adc = {
+ .name = "s3c-adc",
+ .mask = s3c_irq_adc_mask,
+ .unmask = s3c_irq_adc_unmask,
+ .ack = s3c_irq_adc_ack,
+};
+
+/* irq demux for adc */
+static void s3c_irq_demux_adc(unsigned int irq,
+ struct irq_desc *desc)
+{
+ unsigned int subsrc, submsk;
+ unsigned int offset = 9;
+ struct irq_desc *mydesc;
+
+ /* read the current pending interrupts, and the mask
+ * for what it is available */
+
+ subsrc = __raw_readl(S3C2410_SUBSRCPND);
+ submsk = __raw_readl(S3C2410_INTSUBMSK);
+
+ subsrc &= ~submsk;
+ subsrc >>= offset;
+ subsrc &= 3;
+
+ if (subsrc != 0) {
+ if (subsrc & 1) {
+ mydesc = irq_desc + IRQ_TC;
+ desc_handle_irq(IRQ_TC, mydesc);
+ }
+ if (subsrc & 2) {
+ mydesc = irq_desc + IRQ_ADC;
+ desc_handle_irq(IRQ_ADC, mydesc);
+ }
+ }
+}
+
+static void s3c_irq_demux_uart(unsigned int start)
+{
+ unsigned int subsrc, submsk;
+ unsigned int offset = start - IRQ_S3CUART_RX0;
+ struct irq_desc *desc;
+
+ /* read the current pending interrupts, and the mask
+ * for what it is available */
+
+ subsrc = __raw_readl(S3C2410_SUBSRCPND);
+ submsk = __raw_readl(S3C2410_INTSUBMSK);
+
+ irqdbf2("s3c_irq_demux_uart: start=%d (%d), subsrc=0x%08x,0x%08x\n",
+ start, offset, subsrc, submsk);
+
+ subsrc &= ~submsk;
+ subsrc >>= offset;
+ subsrc &= 7;
+
+ if (subsrc != 0) {
+ desc = irq_desc + start;
+
+ if (subsrc & 1)
+ desc_handle_irq(start, desc);
+
+ desc++;
+
+ if (subsrc & 2)
+ desc_handle_irq(start+1, desc);
+
+ desc++;
+
+ if (subsrc & 4)
+ desc_handle_irq(start+2, desc);
+ }
+}
+
+/* uart demux entry points */
+
+static void
+s3c_irq_demux_uart0(unsigned int irq,
+ struct irq_desc *desc)
+{
+ irq = irq;
+ s3c_irq_demux_uart(IRQ_S3CUART_RX0);
+}
+
+static void
+s3c_irq_demux_uart1(unsigned int irq,
+ struct irq_desc *desc)
+{
+ irq = irq;
+ s3c_irq_demux_uart(IRQ_S3CUART_RX1);
+}
+
+static void
+s3c_irq_demux_uart2(unsigned int irq,
+ struct irq_desc *desc)
+{
+ irq = irq;
+ s3c_irq_demux_uart(IRQ_S3CUART_RX2);
+}
+
+static void
+s3c_irq_demux_extint8(unsigned int irq,
+ struct irq_desc *desc)
+{
+ unsigned long eintpnd = __raw_readl(S3C24XX_EINTPEND);
+ unsigned long eintmsk = __raw_readl(S3C24XX_EINTMASK);
+
+ eintpnd &= ~eintmsk;
+ eintpnd &= ~0xff; /* ignore lower irqs */
+
+ /* we may as well handle all the pending IRQs here */
+
+ while (eintpnd) {
+ irq = __ffs(eintpnd);
+ eintpnd &= ~(1<<irq);
+
+ irq += (IRQ_EINT4 - 4);
+ desc_handle_irq(irq, irq_desc + irq);
+ }
+
+}
+
+static void
+s3c_irq_demux_extint4t7(unsigned int irq,
+ struct irq_desc *desc)
+{
+ unsigned long eintpnd = __raw_readl(S3C24XX_EINTPEND);
+ unsigned long eintmsk = __raw_readl(S3C24XX_EINTMASK);
+
+ eintpnd &= ~eintmsk;
+ eintpnd &= 0xff; /* only lower irqs */
+
+ /* we may as well handle all the pending IRQs here */
+
+ while (eintpnd) {
+ irq = __ffs(eintpnd);
+ eintpnd &= ~(1<<irq);
+
+ irq += (IRQ_EINT4 - 4);
+
+ desc_handle_irq(irq, irq_desc + irq);
+ }
+}
+
+#ifdef CONFIG_PM
+
+static struct sleep_save irq_save[] = {
+ SAVE_ITEM(S3C2410_INTMSK),
+ SAVE_ITEM(S3C2410_INTSUBMSK),
+};
+
+/* the extint values move between the s3c2410/s3c2440 and the s3c2412
+ * so we use an array to hold them, and to calculate the address of
+ * the register at run-time
+*/
+
+static unsigned long save_extint[3];
+static unsigned long save_eintflt[4];
+static unsigned long save_eintmask;
+
+int s3c24xx_irq_suspend(struct sys_device *dev, pm_message_t state)
+{
+ unsigned int i;
+
+ for (i = 0; i < ARRAY_SIZE(save_extint); i++)
+ save_extint[i] = __raw_readl(S3C24XX_EXTINT0 + (i*4));
+
+ for (i = 0; i < ARRAY_SIZE(save_eintflt); i++)
+ save_eintflt[i] = __raw_readl(S3C24XX_EINFLT0 + (i*4));
+
+ s3c2410_pm_do_save(irq_save, ARRAY_SIZE(irq_save));
+ save_eintmask = __raw_readl(S3C24XX_EINTMASK);
+
+ return 0;
+}
+
+int s3c24xx_irq_resume(struct sys_device *dev)
+{
+ unsigned int i;
+
+ for (i = 0; i < ARRAY_SIZE(save_extint); i++)
+ __raw_writel(save_extint[i], S3C24XX_EXTINT0 + (i*4));
+
+ for (i = 0; i < ARRAY_SIZE(save_eintflt); i++)
+ __raw_writel(save_eintflt[i], S3C24XX_EINFLT0 + (i*4));
+
+ s3c2410_pm_do_restore(irq_save, ARRAY_SIZE(irq_save));
+ __raw_writel(save_eintmask, S3C24XX_EINTMASK);
+
+ return 0;
+}
+
+#else
+#define s3c24xx_irq_suspend NULL
+#define s3c24xx_irq_resume NULL
+#endif
+
+/* s3c24xx_init_irq
+ *
+ * Initialise S3C2410 IRQ system
+*/
+
+void __init s3c24xx_init_irq(void)
+{
+ unsigned long pend;
+ unsigned long last;
+ int irqno;
+ int i;
+
+ irqdbf("s3c2410_init_irq: clearing interrupt status flags\n");
+
+ /* first, clear all interrupts pending... */
+
+ last = 0;
+ for (i = 0; i < 4; i++) {
+ pend = __raw_readl(S3C24XX_EINTPEND);
+
+ if (pend == 0 || pend == last)
+ break;
+
+ __raw_writel(pend, S3C24XX_EINTPEND);
+ printk("irq: clearing pending ext status %08x\n", (int)pend);
+ last = pend;
+ }
+
+ last = 0;
+ for (i = 0; i < 4; i++) {
+ pend = __raw_readl(S3C2410_INTPND);
+
+ if (pend == 0 || pend == last)
+ break;
+
+ __raw_writel(pend, S3C2410_SRCPND);
+ __raw_writel(pend, S3C2410_INTPND);
+ printk("irq: clearing pending status %08x\n", (int)pend);
+ last = pend;
+ }
+
+ last = 0;
+ for (i = 0; i < 4; i++) {
+ pend = __raw_readl(S3C2410_SUBSRCPND);
+
+ if (pend == 0 || pend == last)
+ break;
+
+ printk("irq: clearing subpending status %08x\n", (int)pend);
+ __raw_writel(pend, S3C2410_SUBSRCPND);
+ last = pend;
+ }
+
+ /* register the main interrupts */
+
+ irqdbf("s3c2410_init_irq: registering s3c2410 interrupt handlers\n");
+
+ for (irqno = IRQ_EINT4t7; irqno <= IRQ_ADCPARENT; irqno++) {
+ /* set all the s3c2410 internal irqs */
+
+ switch (irqno) {
+ /* deal with the special IRQs (cascaded) */
+
+ case IRQ_EINT4t7:
+ case IRQ_EINT8t23:
+ case IRQ_UART0:
+ case IRQ_UART1:
+ case IRQ_UART2:
+ case IRQ_ADCPARENT:
+ set_irq_chip(irqno, &s3c_irq_level_chip);
+ set_irq_handler(irqno, handle_level_irq);
+ break;
+
+ case IRQ_RESERVED6:
+ case IRQ_RESERVED24:
+ /* no IRQ here */
+ break;
+
+ default:
+ //irqdbf("registering irq %d (s3c irq)\n", irqno);
+ set_irq_chip(irqno, &s3c_irq_chip);
+ set_irq_handler(irqno, handle_edge_irq);
+ set_irq_flags(irqno, IRQF_VALID);
+ }
+ }
+
+ /* setup the cascade irq handlers */
+
+ set_irq_chained_handler(IRQ_EINT4t7, s3c_irq_demux_extint4t7);
+ set_irq_chained_handler(IRQ_EINT8t23, s3c_irq_demux_extint8);
+
+ set_irq_chained_handler(IRQ_UART0, s3c_irq_demux_uart0);
+ set_irq_chained_handler(IRQ_UART1, s3c_irq_demux_uart1);
+ set_irq_chained_handler(IRQ_UART2, s3c_irq_demux_uart2);
+ set_irq_chained_handler(IRQ_ADCPARENT, s3c_irq_demux_adc);
+
+ /* external interrupts */
+
+ for (irqno = IRQ_EINT0; irqno <= IRQ_EINT3; irqno++) {
+ irqdbf("registering irq %d (ext int)\n", irqno);
+ set_irq_chip(irqno, &s3c_irq_eint0t4);
+ set_irq_handler(irqno, handle_edge_irq);
+ set_irq_flags(irqno, IRQF_VALID);
+ }
+
+ for (irqno = IRQ_EINT4; irqno <= IRQ_EINT23; irqno++) {
+ irqdbf("registering irq %d (extended s3c irq)\n", irqno);
+ set_irq_chip(irqno, &s3c_irqext_chip);
+ set_irq_handler(irqno, handle_edge_irq);
+ set_irq_flags(irqno, IRQF_VALID);
+ }
+
+ /* register the uart interrupts */
+
+ irqdbf("s3c2410: registering external interrupts\n");
+
+ for (irqno = IRQ_S3CUART_RX0; irqno <= IRQ_S3CUART_ERR0; irqno++) {
+ irqdbf("registering irq %d (s3c uart0 irq)\n", irqno);
+ set_irq_chip(irqno, &s3c_irq_uart0);
+ set_irq_handler(irqno, handle_level_irq);
+ set_irq_flags(irqno, IRQF_VALID);
+ }
+
+ for (irqno = IRQ_S3CUART_RX1; irqno <= IRQ_S3CUART_ERR1; irqno++) {
+ irqdbf("registering irq %d (s3c uart1 irq)\n", irqno);
+ set_irq_chip(irqno, &s3c_irq_uart1);
+ set_irq_handler(irqno, handle_level_irq);
+ set_irq_flags(irqno, IRQF_VALID);
+ }
+
+ for (irqno = IRQ_S3CUART_RX2; irqno <= IRQ_S3CUART_ERR2; irqno++) {
+ irqdbf("registering irq %d (s3c uart2 irq)\n", irqno);
+ set_irq_chip(irqno, &s3c_irq_uart2);
+ set_irq_handler(irqno, handle_level_irq);
+ set_irq_flags(irqno, IRQF_VALID);
+ }
+
+ for (irqno = IRQ_TC; irqno <= IRQ_ADC; irqno++) {
+ irqdbf("registering irq %d (s3c adc irq)\n", irqno);
+ set_irq_chip(irqno, &s3c_irq_adc);
+ set_irq_handler(irqno, handle_edge_irq);
+ set_irq_flags(irqno, IRQF_VALID);
+ }
+
+ irqdbf("s3c2410: registered interrupt handlers\n");
+}
-/* linux/arch/arm/mach-s3c2410/pm-simtec.c
+/* linux/arch/arm/plat-s3c24xx/pm-simtec.c
*
* Copyright (c) 2004 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
#include <asm/mach-types.h>
-#include "pm.h"
+#include <asm/plat-s3c24xx/pm.h>
#define COPYRIGHT ", (c) 2005 Simtec Electronics"
--- /dev/null
+/* linux/arch/arm/plat-s3c24xx/pm.c
+ *
+ * Copyright (c) 2004,2006 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C24XX Power Manager (Suspend-To-RAM) support
+ *
+ * See Documentation/arm/Samsung-S3C24XX/Suspend.txt for more information
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * Parts based on arch/arm/mach-pxa/pm.c
+ *
+ * Thanks to Dimitry Andric for debugging
+*/
+
+#include <linux/init.h>
+#include <linux/suspend.h>
+#include <linux/errno.h>
+#include <linux/time.h>
+#include <linux/interrupt.h>
+#include <linux/crc32.h>
+#include <linux/ioport.h>
+#include <linux/delay.h>
+#include <linux/serial_core.h>
+
+#include <asm/cacheflush.h>
+#include <asm/hardware.h>
+#include <asm/io.h>
+
+#include <asm/arch/regs-serial.h>
+#include <asm/arch/regs-clock.h>
+#include <asm/arch/regs-gpio.h>
+#include <asm/arch/regs-mem.h>
+#include <asm/arch/regs-irq.h>
+
+#include <asm/mach/time.h>
+
+#include <asm/plat-s3c24xx/pm.h>
+
+/* for external use */
+
+unsigned long s3c_pm_flags;
+
+#define PFX "s3c24xx-pm: "
+
+static struct sleep_save core_save[] = {
+ SAVE_ITEM(S3C2410_LOCKTIME),
+ SAVE_ITEM(S3C2410_CLKCON),
+
+ /* we restore the timings here, with the proviso that the board
+ * brings the system up in an slower, or equal frequency setting
+ * to the original system.
+ *
+ * if we cannot guarantee this, then things are going to go very
+ * wrong here, as we modify the refresh and both pll settings.
+ */
+
+ SAVE_ITEM(S3C2410_BWSCON),
+ SAVE_ITEM(S3C2410_BANKCON0),
+ SAVE_ITEM(S3C2410_BANKCON1),
+ SAVE_ITEM(S3C2410_BANKCON2),
+ SAVE_ITEM(S3C2410_BANKCON3),
+ SAVE_ITEM(S3C2410_BANKCON4),
+ SAVE_ITEM(S3C2410_BANKCON5),
+
+ SAVE_ITEM(S3C2410_CLKDIVN),
+ SAVE_ITEM(S3C2410_MPLLCON),
+ SAVE_ITEM(S3C2410_UPLLCON),
+ SAVE_ITEM(S3C2410_CLKSLOW),
+ SAVE_ITEM(S3C2410_REFRESH),
+};
+
+static struct sleep_save gpio_save[] = {
+ SAVE_ITEM(S3C2410_GPACON),
+ SAVE_ITEM(S3C2410_GPADAT),
+
+ SAVE_ITEM(S3C2410_GPBCON),
+ SAVE_ITEM(S3C2410_GPBDAT),
+ SAVE_ITEM(S3C2410_GPBUP),
+
+ SAVE_ITEM(S3C2410_GPCCON),
+ SAVE_ITEM(S3C2410_GPCDAT),
+ SAVE_ITEM(S3C2410_GPCUP),
+
+ SAVE_ITEM(S3C2410_GPDCON),
+ SAVE_ITEM(S3C2410_GPDDAT),
+ SAVE_ITEM(S3C2410_GPDUP),
+
+ SAVE_ITEM(S3C2410_GPECON),
+ SAVE_ITEM(S3C2410_GPEDAT),
+ SAVE_ITEM(S3C2410_GPEUP),
+
+ SAVE_ITEM(S3C2410_GPFCON),
+ SAVE_ITEM(S3C2410_GPFDAT),
+ SAVE_ITEM(S3C2410_GPFUP),
+
+ SAVE_ITEM(S3C2410_GPGCON),
+ SAVE_ITEM(S3C2410_GPGDAT),
+ SAVE_ITEM(S3C2410_GPGUP),
+
+ SAVE_ITEM(S3C2410_GPHCON),
+ SAVE_ITEM(S3C2410_GPHDAT),
+ SAVE_ITEM(S3C2410_GPHUP),
+
+ SAVE_ITEM(S3C2410_DCLKCON),
+};
+
+#ifdef CONFIG_S3C2410_PM_DEBUG
+
+#define SAVE_UART(va) \
+ SAVE_ITEM((va) + S3C2410_ULCON), \
+ SAVE_ITEM((va) + S3C2410_UCON), \
+ SAVE_ITEM((va) + S3C2410_UFCON), \
+ SAVE_ITEM((va) + S3C2410_UMCON), \
+ SAVE_ITEM((va) + S3C2410_UBRDIV)
+
+static struct sleep_save uart_save[] = {
+ SAVE_UART(S3C24XX_VA_UART0),
+ SAVE_UART(S3C24XX_VA_UART1),
+#ifndef CONFIG_CPU_S3C2400
+ SAVE_UART(S3C24XX_VA_UART2),
+#endif
+};
+
+/* debug
+ *
+ * we send the debug to printascii() to allow it to be seen if the
+ * system never wakes up from the sleep
+*/
+
+extern void printascii(const char *);
+
+void pm_dbg(const char *fmt, ...)
+{
+ va_list va;
+ char buff[256];
+
+ va_start(va, fmt);
+ vsprintf(buff, fmt, va);
+ va_end(va);
+
+ printascii(buff);
+}
+
+static void s3c2410_pm_debug_init(void)
+{
+ unsigned long tmp = __raw_readl(S3C2410_CLKCON);
+
+ /* re-start uart clocks */
+ tmp |= S3C2410_CLKCON_UART0;
+ tmp |= S3C2410_CLKCON_UART1;
+ tmp |= S3C2410_CLKCON_UART2;
+
+ __raw_writel(tmp, S3C2410_CLKCON);
+ udelay(10);
+}
+
+#define DBG(fmt...) pm_dbg(fmt)
+#else
+#define DBG(fmt...) printk(KERN_DEBUG fmt)
+
+#define s3c2410_pm_debug_init() do { } while(0)
+
+static struct sleep_save uart_save[] = {};
+#endif
+
+#if defined(CONFIG_S3C2410_PM_CHECK) && CONFIG_S3C2410_PM_CHECK_CHUNKSIZE != 0
+
+/* suspend checking code...
+ *
+ * this next area does a set of crc checks over all the installed
+ * memory, so the system can verify if the resume was ok.
+ *
+ * CONFIG_S3C2410_PM_CHECK_CHUNKSIZE defines the block-size for the CRC,
+ * increasing it will mean that the area corrupted will be less easy to spot,
+ * and reducing the size will cause the CRC save area to grow
+*/
+
+#define CHECK_CHUNKSIZE (CONFIG_S3C2410_PM_CHECK_CHUNKSIZE * 1024)
+
+static u32 crc_size; /* size needed for the crc block */
+static u32 *crcs; /* allocated over suspend/resume */
+
+typedef u32 *(run_fn_t)(struct resource *ptr, u32 *arg);
+
+/* s3c2410_pm_run_res
+ *
+ * go thorugh the given resource list, and look for system ram
+*/
+
+static void s3c2410_pm_run_res(struct resource *ptr, run_fn_t fn, u32 *arg)
+{
+ while (ptr != NULL) {
+ if (ptr->child != NULL)
+ s3c2410_pm_run_res(ptr->child, fn, arg);
+
+ if ((ptr->flags & IORESOURCE_MEM) &&
+ strcmp(ptr->name, "System RAM") == 0) {
+ DBG("Found system RAM at %08lx..%08lx\n",
+ ptr->start, ptr->end);
+ arg = (fn)(ptr, arg);
+ }
+
+ ptr = ptr->sibling;
+ }
+}
+
+static void s3c2410_pm_run_sysram(run_fn_t fn, u32 *arg)
+{
+ s3c2410_pm_run_res(&iomem_resource, fn, arg);
+}
+
+static u32 *s3c2410_pm_countram(struct resource *res, u32 *val)
+{
+ u32 size = (u32)(res->end - res->start)+1;
+
+ size += CHECK_CHUNKSIZE-1;
+ size /= CHECK_CHUNKSIZE;
+
+ DBG("Area %08lx..%08lx, %d blocks\n", res->start, res->end, size);
+
+ *val += size * sizeof(u32);
+ return val;
+}
+
+/* s3c2410_pm_prepare_check
+ *
+ * prepare the necessary information for creating the CRCs. This
+ * must be done before the final save, as it will require memory
+ * allocating, and thus touching bits of the kernel we do not
+ * know about.
+*/
+
+static void s3c2410_pm_check_prepare(void)
+{
+ crc_size = 0;
+
+ s3c2410_pm_run_sysram(s3c2410_pm_countram, &crc_size);
+
+ DBG("s3c2410_pm_prepare_check: %u checks needed\n", crc_size);
+
+ crcs = kmalloc(crc_size+4, GFP_KERNEL);
+ if (crcs == NULL)
+ printk(KERN_ERR "Cannot allocated CRC save area\n");
+}
+
+static u32 *s3c2410_pm_makecheck(struct resource *res, u32 *val)
+{
+ unsigned long addr, left;
+
+ for (addr = res->start; addr < res->end;
+ addr += CHECK_CHUNKSIZE) {
+ left = res->end - addr;
+
+ if (left > CHECK_CHUNKSIZE)
+ left = CHECK_CHUNKSIZE;
+
+ *val = crc32_le(~0, phys_to_virt(addr), left);
+ val++;
+ }
+
+ return val;
+}
+
+/* s3c2410_pm_check_store
+ *
+ * compute the CRC values for the memory blocks before the final
+ * sleep.
+*/
+
+static void s3c2410_pm_check_store(void)
+{
+ if (crcs != NULL)
+ s3c2410_pm_run_sysram(s3c2410_pm_makecheck, crcs);
+}
+
+/* in_region
+ *
+ * return TRUE if the area defined by ptr..ptr+size contatins the
+ * what..what+whatsz
+*/
+
+static inline int in_region(void *ptr, int size, void *what, size_t whatsz)
+{
+ if ((what+whatsz) < ptr)
+ return 0;
+
+ if (what > (ptr+size))
+ return 0;
+
+ return 1;
+}
+
+static u32 *s3c2410_pm_runcheck(struct resource *res, u32 *val)
+{
+ void *save_at = phys_to_virt(s3c2410_sleep_save_phys);
+ unsigned long addr;
+ unsigned long left;
+ void *ptr;
+ u32 calc;
+
+ for (addr = res->start; addr < res->end;
+ addr += CHECK_CHUNKSIZE) {
+ left = res->end - addr;
+
+ if (left > CHECK_CHUNKSIZE)
+ left = CHECK_CHUNKSIZE;
+
+ ptr = phys_to_virt(addr);
+
+ if (in_region(ptr, left, crcs, crc_size)) {
+ DBG("skipping %08lx, has crc block in\n", addr);
+ goto skip_check;
+ }
+
+ if (in_region(ptr, left, save_at, 32*4 )) {
+ DBG("skipping %08lx, has save block in\n", addr);
+ goto skip_check;
+ }
+
+ /* calculate and check the checksum */
+
+ calc = crc32_le(~0, ptr, left);
+ if (calc != *val) {
+ printk(KERN_ERR PFX "Restore CRC error at "
+ "%08lx (%08x vs %08x)\n", addr, calc, *val);
+
+ DBG("Restore CRC error at %08lx (%08x vs %08x)\n",
+ addr, calc, *val);
+ }
+
+ skip_check:
+ val++;
+ }
+
+ return val;
+}
+
+/* s3c2410_pm_check_restore
+ *
+ * check the CRCs after the restore event and free the memory used
+ * to hold them
+*/
+
+static void s3c2410_pm_check_restore(void)
+{
+ if (crcs != NULL) {
+ s3c2410_pm_run_sysram(s3c2410_pm_runcheck, crcs);
+ kfree(crcs);
+ crcs = NULL;
+ }
+}
+
+#else
+
+#define s3c2410_pm_check_prepare() do { } while(0)
+#define s3c2410_pm_check_restore() do { } while(0)
+#define s3c2410_pm_check_store() do { } while(0)
+#endif
+
+/* helper functions to save and restore register state */
+
+void s3c2410_pm_do_save(struct sleep_save *ptr, int count)
+{
+ for (; count > 0; count--, ptr++) {
+ ptr->val = __raw_readl(ptr->reg);
+ DBG("saved %p value %08lx\n", ptr->reg, ptr->val);
+ }
+}
+
+/* s3c2410_pm_do_restore
+ *
+ * restore the system from the given list of saved registers
+ *
+ * Note, we do not use DBG() in here, as the system may not have
+ * restore the UARTs state yet
+*/
+
+void s3c2410_pm_do_restore(struct sleep_save *ptr, int count)
+{
+ for (; count > 0; count--, ptr++) {
+ printk(KERN_DEBUG "restore %p (restore %08lx, was %08x)\n",
+ ptr->reg, ptr->val, __raw_readl(ptr->reg));
+
+ __raw_writel(ptr->val, ptr->reg);
+ }
+}
+
+/* s3c2410_pm_do_restore_core
+ *
+ * similar to s3c2410_pm_do_restore_core
+ *
+ * WARNING: Do not put any debug in here that may effect memory or use
+ * peripherals, as things may be changing!
+*/
+
+static void s3c2410_pm_do_restore_core(struct sleep_save *ptr, int count)
+{
+ for (; count > 0; count--, ptr++) {
+ __raw_writel(ptr->val, ptr->reg);
+ }
+}
+
+/* s3c2410_pm_show_resume_irqs
+ *
+ * print any IRQs asserted at resume time (ie, we woke from)
+*/
+
+static void s3c2410_pm_show_resume_irqs(int start, unsigned long which,
+ unsigned long mask)
+{
+ int i;
+
+ which &= ~mask;
+
+ for (i = 0; i <= 31; i++) {
+ if ((which) & (1L<<i)) {
+ DBG("IRQ %d asserted at resume\n", start+i);
+ }
+ }
+}
+
+/* s3c2410_pm_check_resume_pin
+ *
+ * check to see if the pin is configured correctly for sleep mode, and
+ * make any necessary adjustments if it is not
+*/
+
+static void s3c2410_pm_check_resume_pin(unsigned int pin, unsigned int irqoffs)
+{
+ unsigned long irqstate;
+ unsigned long pinstate;
+ int irq = s3c2410_gpio_getirq(pin);
+
+ if (irqoffs < 4)
+ irqstate = s3c_irqwake_intmask & (1L<<irqoffs);
+ else
+ irqstate = s3c_irqwake_eintmask & (1L<<irqoffs);
+
+ pinstate = s3c2410_gpio_getcfg(pin);
+
+ if (!irqstate) {
+ if (pinstate == S3C2410_GPIO_IRQ)
+ DBG("Leaving IRQ %d (pin %d) enabled\n", irq, pin);
+ } else {
+ if (pinstate == S3C2410_GPIO_IRQ) {
+ DBG("Disabling IRQ %d (pin %d)\n", irq, pin);
+ s3c2410_gpio_cfgpin(pin, S3C2410_GPIO_INPUT);
+ }
+ }
+}
+
+/* s3c2410_pm_configure_extint
+ *
+ * configure all external interrupt pins
+*/
+
+static void s3c2410_pm_configure_extint(void)
+{
+ int pin;
+
+ /* for each of the external interrupts (EINT0..EINT15) we
+ * need to check wether it is an external interrupt source,
+ * and then configure it as an input if it is not
+ */
+
+ for (pin = S3C2410_GPF0; pin <= S3C2410_GPF7; pin++) {
+ s3c2410_pm_check_resume_pin(pin, pin - S3C2410_GPF0);
+ }
+
+ for (pin = S3C2410_GPG0; pin <= S3C2410_GPG7; pin++) {
+ s3c2410_pm_check_resume_pin(pin, (pin - S3C2410_GPG0)+8);
+ }
+}
+
+void (*pm_cpu_prep)(void);
+void (*pm_cpu_sleep)(void);
+
+#define any_allowed(mask, allow) (((mask) & (allow)) != (allow))
+
+/* s3c2410_pm_enter
+ *
+ * central control for sleep/resume process
+*/
+
+static int s3c2410_pm_enter(suspend_state_t state)
+{
+ unsigned long regs_save[16];
+
+ /* ensure the debug is initialised (if enabled) */
+
+ s3c2410_pm_debug_init();
+
+ DBG("s3c2410_pm_enter(%d)\n", state);
+
+ if (pm_cpu_prep == NULL || pm_cpu_sleep == NULL) {
+ printk(KERN_ERR PFX "error: no cpu sleep functions set\n");
+ return -EINVAL;
+ }
+
+ if (state != PM_SUSPEND_MEM) {
+ printk(KERN_ERR PFX "error: only PM_SUSPEND_MEM supported\n");
+ return -EINVAL;
+ }
+
+ /* check if we have anything to wake-up with... bad things seem
+ * to happen if you suspend with no wakeup (system will often
+ * require a full power-cycle)
+ */
+
+ if (!any_allowed(s3c_irqwake_intmask, s3c_irqwake_intallow) &&
+ !any_allowed(s3c_irqwake_eintmask, s3c_irqwake_eintallow)) {
+ printk(KERN_ERR PFX "No sources enabled for wake-up!\n");
+ printk(KERN_ERR PFX "Aborting sleep\n");
+ return -EINVAL;
+ }
+
+ /* prepare check area if configured */
+
+ s3c2410_pm_check_prepare();
+
+ /* store the physical address of the register recovery block */
+
+ s3c2410_sleep_save_phys = virt_to_phys(regs_save);
+
+ DBG("s3c2410_sleep_save_phys=0x%08lx\n", s3c2410_sleep_save_phys);
+
+ /* save all necessary core registers not covered by the drivers */
+
+ s3c2410_pm_do_save(gpio_save, ARRAY_SIZE(gpio_save));
+ s3c2410_pm_do_save(core_save, ARRAY_SIZE(core_save));
+ s3c2410_pm_do_save(uart_save, ARRAY_SIZE(uart_save));
+
+ /* set the irq configuration for wake */
+
+ s3c2410_pm_configure_extint();
+
+ DBG("sleep: irq wakeup masks: %08lx,%08lx\n",
+ s3c_irqwake_intmask, s3c_irqwake_eintmask);
+
+ __raw_writel(s3c_irqwake_intmask, S3C2410_INTMSK);
+ __raw_writel(s3c_irqwake_eintmask, S3C2410_EINTMASK);
+
+ /* ack any outstanding external interrupts before we go to sleep */
+
+ __raw_writel(__raw_readl(S3C2410_EINTPEND), S3C2410_EINTPEND);
+ __raw_writel(__raw_readl(S3C2410_INTPND), S3C2410_INTPND);
+ __raw_writel(__raw_readl(S3C2410_SRCPND), S3C2410_SRCPND);
+
+ /* call cpu specific preperation */
+
+ pm_cpu_prep();
+
+ /* flush cache back to ram */
+
+ flush_cache_all();
+
+ s3c2410_pm_check_store();
+
+ /* send the cpu to sleep... */
+
+ __raw_writel(0x00, S3C2410_CLKCON); /* turn off clocks over sleep */
+
+ /* s3c2410_cpu_save will also act as our return point from when
+ * we resume as it saves its own register state, so use the return
+ * code to differentiate return from save and return from sleep */
+
+ if (s3c2410_cpu_save(regs_save) == 0) {
+ flush_cache_all();
+ pm_cpu_sleep();
+ }
+
+ /* restore the cpu state */
+
+ cpu_init();
+
+ /* restore the system state */
+
+ s3c2410_pm_do_restore_core(core_save, ARRAY_SIZE(core_save));
+ s3c2410_pm_do_restore(gpio_save, ARRAY_SIZE(gpio_save));
+ s3c2410_pm_do_restore(uart_save, ARRAY_SIZE(uart_save));
+
+ s3c2410_pm_debug_init();
+
+ /* check what irq (if any) restored the system */
+
+ DBG("post sleep: IRQs 0x%08x, 0x%08x\n",
+ __raw_readl(S3C2410_SRCPND),
+ __raw_readl(S3C2410_EINTPEND));
+
+ s3c2410_pm_show_resume_irqs(IRQ_EINT0, __raw_readl(S3C2410_SRCPND),
+ s3c_irqwake_intmask);
+
+ s3c2410_pm_show_resume_irqs(IRQ_EINT4-4, __raw_readl(S3C2410_EINTPEND),
+ s3c_irqwake_eintmask);
+
+ DBG("post sleep, preparing to return\n");
+
+ s3c2410_pm_check_restore();
+
+ /* ok, let's return from sleep */
+
+ DBG("S3C2410 PM Resume (post-restore)\n");
+ return 0;
+}
+
+/*
+ * Called after processes are frozen, but before we shut down devices.
+ */
+static int s3c2410_pm_prepare(suspend_state_t state)
+{
+ return 0;
+}
+
+/*
+ * Called after devices are re-setup, but before processes are thawed.
+ */
+static int s3c2410_pm_finish(suspend_state_t state)
+{
+ return 0;
+}
+
+/*
+ * Set to PM_DISK_FIRMWARE so we can quickly veto suspend-to-disk.
+ */
+static struct pm_ops s3c2410_pm_ops = {
+ .pm_disk_mode = PM_DISK_FIRMWARE,
+ .prepare = s3c2410_pm_prepare,
+ .enter = s3c2410_pm_enter,
+ .finish = s3c2410_pm_finish,
+};
+
+/* s3c2410_pm_init
+ *
+ * Attach the power management functions. This should be called
+ * from the board specific initialisation if the board supports
+ * it.
+*/
+
+int __init s3c2410_pm_init(void)
+{
+ printk("S3C2410 Power Management, (c) 2004 Simtec Electronics\n");
+
+ pm_set_ops(&s3c2410_pm_ops);
+ return 0;
+}
-/* linux/arch/arm/mach-s3c2410/s3c244x-irq.c
+/* linux/arch/arm/plat-s3c24xx/s3c244x-irq.c
*
* Copyright (c) 2003,2004 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
#include <asm/arch/regs-irq.h>
#include <asm/arch/regs-gpio.h>
-#include "cpu.h"
-#include "pm.h"
-#include "irq.h"
+#include <asm/plat-s3c24xx/cpu.h>
+#include <asm/plat-s3c24xx/pm.h>
+#include <asm/plat-s3c24xx/irq.h>
/* camera irq */
-/* linux/arch/arm/mach-s3c2410/s3c244x.c
+/* linux/arch/arm/plat-s3c24xx/s3c244x.c
*
* Copyright (c) 2004-2006 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
*
- * Samsung S3C2440 and S3C2442 Mobile CPU support
+ * Samsung S3C2440 and S3C2442 Mobile CPU support (not S3C2443)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
#include <asm/arch/regs-gpioj.h>
#include <asm/arch/regs-dsc.h>
-#include "s3c2410.h"
-#include "s3c2440.h"
+#include <asm/plat-s3c24xx/s3c2410.h>
+#include <asm/plat-s3c24xx/s3c2440.h>
#include "s3c244x.h"
-#include "clock.h"
-#include "devs.h"
-#include "cpu.h"
-#include "pm.h"
+#include <asm/plat-s3c24xx/clock.h>
+#include <asm/plat-s3c24xx/devs.h>
+#include <asm/plat-s3c24xx/cpu.h>
+#include <asm/plat-s3c24xx/pm.h>
static struct map_desc s3c244x_iodesc[] __initdata = {
IODESC_ENT(CLKPWR),
-/* arch/arm/mach-s3c2410/s3c244x.h
+/* linux/arch/arm/plat-s3c24xx/s3c244x.h
*
* Copyright (c) 2004-2005 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
--- /dev/null
+/* linux/arch/arm/mach-s3c2410/sleep.S
+ *
+ * Copyright (c) 2004 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2410 Power Manager (Suspend-To-RAM) support
+ *
+ * Based on PXA/SA1100 sleep code by:
+ * Nicolas Pitre, (c) 2002 Monta Vista Software Inc
+ * Cliff Brake, (c) 2001
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+*/
+
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+#include <asm/hardware.h>
+#include <asm/arch/map.h>
+
+#include <asm/arch/regs-gpio.h>
+#include <asm/arch/regs-clock.h>
+#include <asm/arch/regs-mem.h>
+#include <asm/arch/regs-serial.h>
+
+/* CONFIG_DEBUG_RESUME is dangerous if your bootloader does not
+ * reset the UART configuration, only enable if you really need this!
+*/
+//#define CONFIG_DEBUG_RESUME
+
+ .text
+
+ /* s3c2410_cpu_save
+ *
+ * save enough of the CPU state to allow us to re-start
+ * pm.c code. as we store items like the sp/lr, we will
+ * end up returning from this function when the cpu resumes
+ * so the return value is set to mark this.
+ *
+ * This arangement means we avoid having to flush the cache
+ * from this code.
+ *
+ * entry:
+ * r0 = pointer to save block
+ *
+ * exit:
+ * r0 = 0 => we stored everything
+ * 1 => resumed from sleep
+ */
+
+ENTRY(s3c2410_cpu_save)
+ stmfd sp!, { r4 - r12, lr }
+
+ @@ store co-processor registers
+
+ mrc p15, 0, r4, c13, c0, 0 @ PID
+ mrc p15, 0, r5, c3, c0, 0 @ Domain ID
+ mrc p15, 0, r6, c2, c0, 0 @ translation table base address
+ mrc p15, 0, r7, c1, c0, 0 @ control register
+
+ stmia r0, { r4 - r13 }
+
+ mov r0, #0
+ ldmfd sp, { r4 - r12, pc }
+
+ @@ return to the caller, after having the MMU
+ @@ turned on, this restores the last bits from the
+ @@ stack
+resume_with_mmu:
+ mov r0, #1
+ ldmfd sp!, { r4 - r12, pc }
+
+ .ltorg
+
+ @@ the next bits sit in the .data segment, even though they
+ @@ happen to be code... the s3c2410_sleep_save_phys needs to be
+ @@ accessed by the resume code before it can restore the MMU.
+ @@ This means that the variable has to be close enough for the
+ @@ code to read it... since the .text segment needs to be RO,
+ @@ the data segment can be the only place to put this code.
+
+ .data
+
+ .global s3c2410_sleep_save_phys
+s3c2410_sleep_save_phys:
+ .word 0
+
+ /* s3c2410_cpu_resume
+ *
+ * resume code entry for bootloader to call
+ *
+ * we must put this code here in the data segment as we have no
+ * other way of restoring the stack pointer after sleep, and we
+ * must not write to the code segment (code is read-only)
+ */
+
+ENTRY(s3c2410_cpu_resume)
+ mov r0, #PSR_I_BIT | PSR_F_BIT | SVC_MODE
+ msr cpsr_c, r0
+
+ @@ load UART to allow us to print the two characters for
+ @@ resume debug
+
+ mov r2, #S3C24XX_PA_UART & 0xff000000
+ orr r2, r2, #S3C24XX_PA_UART & 0xff000
+
+#if 0
+ /* SMDK2440 LED set */
+ mov r14, #S3C24XX_PA_GPIO
+ ldr r12, [ r14, #0x54 ]
+ bic r12, r12, #3<<4
+ orr r12, r12, #1<<7
+ str r12, [ r14, #0x54 ]
+#endif
+
+#ifdef CONFIG_DEBUG_RESUME
+ mov r3, #'L'
+ strb r3, [ r2, #S3C2410_UTXH ]
+1001:
+ ldrb r14, [ r3, #S3C2410_UTRSTAT ]
+ tst r14, #S3C2410_UTRSTAT_TXE
+ beq 1001b
+#endif /* CONFIG_DEBUG_RESUME */
+
+ mov r1, #0
+ mcr p15, 0, r1, c8, c7, 0 @@ invalidate I & D TLBs
+ mcr p15, 0, r1, c7, c7, 0 @@ invalidate I & D caches
+
+ ldr r0, s3c2410_sleep_save_phys @ address of restore block
+ ldmia r0, { r4 - r13 }
+
+ mcr p15, 0, r4, c13, c0, 0 @ PID
+ mcr p15, 0, r5, c3, c0, 0 @ Domain ID
+ mcr p15, 0, r6, c2, c0, 0 @ translation table base
+
+#ifdef CONFIG_DEBUG_RESUME
+ mov r3, #'R'
+ strb r3, [ r2, #S3C2410_UTXH ]
+#endif
+
+ ldr r2, =resume_with_mmu
+ mcr p15, 0, r7, c1, c0, 0 @ turn on MMU, etc
+ nop @ second-to-last before mmu
+ mov pc, r2 @ go back to virtual address
+
+ .ltorg
-/* linux/arch/arm/mach-s3c2410/time.c
+/* linux/arch/arm/plat-s3c24xx/time.c
*
* Copyright (C) 2003-2005 Simtec Electronics
* Ben Dooks, <ben@simtec.co.uk>
#include <asm/arch/regs-irq.h>
#include <asm/mach/time.h>
-#include "clock.h"
-#include "cpu.h"
+#include <asm/plat-s3c24xx/clock.h>
+#include <asm/plat-s3c24xx/cpu.h>
static unsigned long timer_startval;
static unsigned long timer_usec_ticks;
*
* Copyright (C) 2006 Atmel Corporation
*
- * Based on arch/arm/mach-at91rm9200/clock.c
+ * Based on arch/arm/mach-at91/clock.c
* Copyright (C) 2005 David Brownell
* Copyright (C) 2005 Ivan Kokshaysky
*
*
* Copyright (C) 2006 Atmel Corporation
*
- * Based on arch/arm/mach-at91rm9200/clock.c
+ * Based on arch/arm/mach-at91/clock.c
* Copyright (C) 2005 David Brownell
* Copyright (C) 2005 Ivan Kokshaysky
*
* Every time unit enable is asserted, GPOD needs to be cleared
* on IOP3XX to avoid data corruption on the bus.
*/
-#ifdef CONFIG_PLAT_IOP
+#if defined(CONFIG_ARCH_IOP32X) || defined(CONFIG_ARCH_IOP33X)
if (iop3xx_adap->id == 0) {
gpio_line_set(IOP3XX_GPIO_LINE(7), GPIO_LOW);
gpio_line_set(IOP3XX_GPIO_LINE(6), GPIO_LOW);
#include <asm/hardware.h>
#include <asm/irq.h>
+#include <asm/io.h>
#include <asm/arch/i2c.h>
#include <asm/arch/pxa-regs.h>
unsigned int irqlogidx;
u32 isrlog[32];
u32 icrlog[32];
+
+ void __iomem *reg_base;
+
+ unsigned long iobase;
+ unsigned long iosize;
+
+ int irq;
};
+#define _IBMR(i2c) ((i2c)->reg_base + 0)
+#define _IDBR(i2c) ((i2c)->reg_base + 8)
+#define _ICR(i2c) ((i2c)->reg_base + 0x10)
+#define _ISR(i2c) ((i2c)->reg_base + 0x18)
+#define _ISAR(i2c) ((i2c)->reg_base + 0x20)
+
/*
* I2C Slave mode address
*/
static void i2c_pxa_show_state(struct pxa_i2c *i2c, int lno, const char *fname)
{
- dev_dbg(&i2c->adap.dev, "state:%s:%d: ISR=%08x, ICR=%08x, IBMR=%02x\n", fname, lno, ISR, ICR, IBMR);
+ dev_dbg(&i2c->adap.dev, "state:%s:%d: ISR=%08x, ICR=%08x, IBMR=%02x\n", fname, lno,
+ readl(_ISR(i2c)), readl(_ICR(i2c)), readl(_IBMR(i2c)));
}
#define show_state(i2c) i2c_pxa_show_state(i2c, __LINE__, __FUNCTION__)
printk("i2c: msg_num: %d msg_idx: %d msg_ptr: %d\n",
i2c->msg_num, i2c->msg_idx, i2c->msg_ptr);
printk("i2c: ICR: %08x ISR: %08x\n"
- "i2c: log: ", ICR, ISR);
+ "i2c: log: ", readl(_ICR(i2c)), readl(_ISR(i2c)));
for (i = 0; i < i2c->irqlogidx; i++)
printk("[%08x:%08x] ", i2c->isrlog[i], i2c->icrlog[i]);
printk("\n");
static inline int i2c_pxa_is_slavemode(struct pxa_i2c *i2c)
{
- return !(ICR & ICR_SCLE);
+ return !(readl(_ICR(i2c)) & ICR_SCLE);
}
static void i2c_pxa_abort(struct pxa_i2c *i2c)
return;
}
- while (time_before(jiffies, timeout) && (IBMR & 0x1) == 0) {
- unsigned long icr = ICR;
+ while (time_before(jiffies, timeout) && (readl(_IBMR(i2c)) & 0x1) == 0) {
+ unsigned long icr = readl(_ICR(i2c));
icr &= ~ICR_START;
icr |= ICR_ACKNAK | ICR_STOP | ICR_TB;
- ICR = icr;
+ writel(icr, _ICR(i2c));
show_state(i2c);
msleep(1);
}
- ICR &= ~(ICR_MA | ICR_START | ICR_STOP);
+ writel(readl(_ICR(i2c)) & ~(ICR_MA | ICR_START | ICR_STOP),
+ _ICR(i2c));
}
static int i2c_pxa_wait_bus_not_busy(struct pxa_i2c *i2c)
{
int timeout = DEF_TIMEOUT;
- while (timeout-- && ISR & (ISR_IBB | ISR_UB)) {
- if ((ISR & ISR_SAD) != 0)
+ while (timeout-- && readl(_ISR(i2c)) & (ISR_IBB | ISR_UB)) {
+ if ((readl(_ISR(i2c)) & ISR_SAD) != 0)
timeout += 4;
msleep(2);
while (time_before(jiffies, timeout)) {
if (i2c_debug > 1)
dev_dbg(&i2c->adap.dev, "%s: %ld: ISR=%08x, ICR=%08x, IBMR=%02x\n",
- __func__, (long)jiffies, ISR, ICR, IBMR);
+ __func__, (long)jiffies, readl(_ISR(i2c)), readl(_ICR(i2c)), readl(_IBMR(i2c)));
- if (ISR & ISR_SAD) {
+ if (readl(_ISR(i2c)) & ISR_SAD) {
if (i2c_debug > 0)
dev_dbg(&i2c->adap.dev, "%s: Slave detected\n", __func__);
goto out;
* quick check of the i2c lines themselves to ensure they've
* gone high...
*/
- if ((ISR & (ISR_UB | ISR_IBB)) == 0 && IBMR == 3) {
+ if ((readl(_ISR(i2c)) & (ISR_UB | ISR_IBB)) == 0 && readl(_IBMR(i2c)) == 3) {
if (i2c_debug > 0)
dev_dbg(&i2c->adap.dev, "%s: done\n", __func__);
return 1;
if (i2c_debug)
dev_dbg(&i2c->adap.dev, "setting to bus master\n");
- if ((ISR & (ISR_UB | ISR_IBB)) != 0) {
+ if ((readl(_ISR(i2c)) & (ISR_UB | ISR_IBB)) != 0) {
dev_dbg(&i2c->adap.dev, "%s: unit is busy\n", __func__);
if (!i2c_pxa_wait_master(i2c)) {
dev_dbg(&i2c->adap.dev, "%s: error: unit busy\n", __func__);
}
}
- ICR |= ICR_SCLE;
+ writel(readl(_ICR(i2c)) | ICR_SCLE, _ICR(i2c));
return 0;
}
while (time_before(jiffies, timeout)) {
if (i2c_debug > 1)
dev_dbg(&i2c->adap.dev, "%s: %ld: ISR=%08x, ICR=%08x, IBMR=%02x\n",
- __func__, (long)jiffies, ISR, ICR, IBMR);
+ __func__, (long)jiffies, readl(_ISR(i2c)), readl(_ICR(i2c)), readl(_IBMR(i2c)));
- if ((ISR & (ISR_UB|ISR_IBB)) == 0 ||
- (ISR & ISR_SAD) != 0 ||
- (ICR & ICR_SCLE) == 0) {
+ if ((readl(_ISR(i2c)) & (ISR_UB|ISR_IBB)) == 0 ||
+ (readl(_ISR(i2c)) & ISR_SAD) != 0 ||
+ (readl(_ICR(i2c)) & ICR_SCLE) == 0) {
if (i2c_debug > 1)
dev_dbg(&i2c->adap.dev, "%s: done\n", __func__);
return 1;
/* we need to wait for the stop condition to end */
/* if we where in stop, then clear... */
- if (ICR & ICR_STOP) {
+ if (readl(_ICR(i2c)) & ICR_STOP) {
udelay(100);
- ICR &= ~ICR_STOP;
+ writel(readl(_ICR(i2c)) & ~ICR_STOP, _ICR(i2c));
}
if (!i2c_pxa_wait_slave(i2c)) {
}
}
- ICR &= ~(ICR_STOP|ICR_ACKNAK|ICR_MA);
- ICR &= ~ICR_SCLE;
+ writel(readl(_ICR(i2c)) & ~(ICR_STOP|ICR_ACKNAK|ICR_MA), _ICR(i2c));
+ writel(readl(_ICR(i2c)) & ~ICR_SCLE, _ICR(i2c));
if (i2c_debug) {
- dev_dbg(&i2c->adap.dev, "ICR now %08x, ISR %08x\n", ICR, ISR);
- decode_ICR(ICR);
+ dev_dbg(&i2c->adap.dev, "ICR now %08x, ISR %08x\n", readl(_ICR(i2c)), readl(_ISR(i2c)));
+ decode_ICR(readl(_ICR(i2c)));
}
}
#else
i2c_pxa_abort(i2c);
/* reset according to 9.8 */
- ICR = ICR_UR;
- ISR = I2C_ISR_INIT;
- ICR &= ~ICR_UR;
+ writel(ICR_UR, _ICR(i2c));
+ writel(I2C_ISR_INIT, _ISR(i2c));
+ writel(readl(_ICR(i2c)) & ~ICR_UR, _ICR(i2c));
- ISAR = i2c->slave_addr;
+ writel(i2c->slave_addr, _ISAR(i2c));
/* set control register values */
- ICR = I2C_ICR_INIT;
+ writel(I2C_ICR_INIT, _ICR(i2c));
#ifdef CONFIG_I2C_PXA_SLAVE
dev_info(&i2c->adap.dev, "Enabling slave mode\n");
- ICR |= ICR_SADIE | ICR_ALDIE | ICR_SSDIE;
+ writel(readl(_ICR(i2c)) | ICR_SADIE | ICR_ALDIE | ICR_SSDIE, _ICR(i2c));
#endif
i2c_pxa_set_slave(i2c, 0);
/* enable unit */
- ICR |= ICR_IUE;
+ writel(readl(_ICR(i2c)) | ICR_IUE, _ICR(i2c));
udelay(100);
}
if (i2c->slave != NULL)
ret = i2c->slave->read(i2c->slave->data);
- IDBR = ret;
- ICR |= ICR_TB; /* allow next byte */
+ writel(ret, _IDBR(i2c));
+ writel(readl(_ICR(i2c)) | ICR_TB, _ICR(i2c)); /* allow next byte */
}
}
static void i2c_pxa_slave_rxfull(struct pxa_i2c *i2c, u32 isr)
{
- unsigned int byte = IDBR;
+ unsigned int byte = readl(_IDBR(i2c));
if (i2c->slave != NULL)
i2c->slave->write(i2c->slave->data, byte);
- ICR |= ICR_TB;
+ writel(readl(_ICR(i2c)) | ICR_TB, _ICR(i2c));
}
static void i2c_pxa_slave_start(struct pxa_i2c *i2c, u32 isr)
* start condition... if this happens, we'd better back off
* and stop holding the poor thing up
*/
- ICR &= ~(ICR_START|ICR_STOP);
- ICR |= ICR_TB;
+ writel(readl(_ICR(i2c)) & ~(ICR_START|ICR_STOP), _ICR(i2c));
+ writel(readl(_ICR(i2c)) | ICR_TB, _ICR(i2c));
timeout = 0x10000;
while (1) {
- if ((IBMR & 2) == 2)
+ if ((readl(_IBMR(i2c)) & 2) == 2)
break;
timeout--;
}
}
- ICR &= ~ICR_SCLE;
+ writel(readl(_ICR(i2c)) & ~ICR_SCLE, _ICR(i2c));
}
static void i2c_pxa_slave_stop(struct pxa_i2c *i2c)
if (isr & ISR_BED) {
/* what should we do here? */
} else {
- IDBR = 0;
- ICR |= ICR_TB;
+ writel(0, _IDBR(i2c));
+ writel(readl(_ICR(i2c)) | ICR_TB, _ICR(i2c));
}
}
static void i2c_pxa_slave_rxfull(struct pxa_i2c *i2c, u32 isr)
{
- ICR |= ICR_TB | ICR_ACKNAK;
+ writel(readl(_ICR(i2c)) | ICR_TB | ICR_ACKNAK, _ICR(i2c));
}
static void i2c_pxa_slave_start(struct pxa_i2c *i2c, u32 isr)
* start condition... if this happens, we'd better back off
* and stop holding the poor thing up
*/
- ICR &= ~(ICR_START|ICR_STOP);
- ICR |= ICR_TB | ICR_ACKNAK;
+ writel(readl(_ICR(i2c)) & ~(ICR_START|ICR_STOP), _ICR(i2c));
+ writel(readl(_ICR(i2c)) | ICR_TB | ICR_ACKNAK, _ICR(i2c));
timeout = 0x10000;
while (1) {
- if ((IBMR & 2) == 2)
+ if ((readl(_IBMR(i2c)) & 2) == 2)
break;
timeout--;
}
}
- ICR &= ~ICR_SCLE;
+ writel(readl(_ICR(i2c)) & ~ICR_SCLE, _ICR(i2c));
}
static void i2c_pxa_slave_stop(struct pxa_i2c *i2c)
/*
* Step 1: target slave address into IDBR
*/
- IDBR = i2c_pxa_addr_byte(i2c->msg);
+ writel(i2c_pxa_addr_byte(i2c->msg), _IDBR(i2c));
/*
* Step 2: initiate the write.
*/
- icr = ICR & ~(ICR_STOP | ICR_ALDIE);
- ICR = icr | ICR_START | ICR_TB;
+ icr = readl(_ICR(i2c)) & ~(ICR_STOP | ICR_ALDIE);
+ writel(icr | ICR_START | ICR_TB, _ICR(i2c));
}
/*
static void i2c_pxa_irq_txempty(struct pxa_i2c *i2c, u32 isr)
{
- u32 icr = ICR & ~(ICR_START|ICR_STOP|ICR_ACKNAK|ICR_TB);
+ u32 icr = readl(_ICR(i2c)) & ~(ICR_START|ICR_STOP|ICR_ACKNAK|ICR_TB);
again:
/*
/*
* Write mode. Write the next data byte.
*/
- IDBR = i2c->msg->buf[i2c->msg_ptr++];
+ writel(i2c->msg->buf[i2c->msg_ptr++], _IDBR(i2c));
icr |= ICR_ALDIE | ICR_TB;
/*
* Write the next address.
*/
- IDBR = i2c_pxa_addr_byte(i2c->msg);
+ writel(i2c_pxa_addr_byte(i2c->msg), _IDBR(i2c));
/*
* And trigger a repeated start, and send the byte.
i2c->icrlog[i2c->irqlogidx-1] = icr;
- ICR = icr;
+ writel(icr, _ICR(i2c));
show_state(i2c);
}
static void i2c_pxa_irq_rxfull(struct pxa_i2c *i2c, u32 isr)
{
- u32 icr = ICR & ~(ICR_START|ICR_STOP|ICR_ACKNAK|ICR_TB);
+ u32 icr = readl(_ICR(i2c)) & ~(ICR_START|ICR_STOP|ICR_ACKNAK|ICR_TB);
/*
* Read the byte.
*/
- i2c->msg->buf[i2c->msg_ptr++] = IDBR;
+ i2c->msg->buf[i2c->msg_ptr++] = readl(_IDBR(i2c));
if (i2c->msg_ptr < i2c->msg->len) {
/*
i2c->icrlog[i2c->irqlogidx-1] = icr;
- ICR = icr;
+ writel(icr, _ICR(i2c));
}
static irqreturn_t i2c_pxa_handler(int this_irq, void *dev_id)
{
struct pxa_i2c *i2c = dev_id;
- u32 isr = ISR;
+ u32 isr = readl(_ISR(i2c));
if (i2c_debug > 2 && 0) {
dev_dbg(&i2c->adap.dev, "%s: ISR=%08x, ICR=%08x, IBMR=%02x\n",
- __func__, isr, ICR, IBMR);
+ __func__, isr, readl(_ICR(i2c)), readl(_IBMR(i2c)));
decode_ISR(isr);
}
/*
* Always clear all pending IRQs.
*/
- ISR = isr & (ISR_SSD|ISR_ALD|ISR_ITE|ISR_IRF|ISR_SAD|ISR_BED);
+ writel(isr & (ISR_SSD|ISR_ALD|ISR_ITE|ISR_IRF|ISR_SAD|ISR_BED), _ISR(i2c));
if (isr & ISR_SAD)
i2c_pxa_slave_start(i2c, isr);
/* If the I2C controller is disabled we need to reset it (probably due
to a suspend/resume destroying state). We do this here as we can then
avoid worrying about resuming the controller before its users. */
- if (!(ICR & ICR_IUE))
+ if (!(readl(_ICR(i2c)) & ICR_IUE))
i2c_pxa_reset(i2c);
for (i = adap->retries; i >= 0; i--) {
static struct pxa_i2c i2c_pxa = {
.lock = SPIN_LOCK_UNLOCKED,
- .wait = __WAIT_QUEUE_HEAD_INITIALIZER(i2c_pxa.wait),
.adap = {
.owner = THIS_MODULE,
.algo = &i2c_pxa_algorithm,
- .name = "pxa2xx-i2c",
+ .name = "pxa2xx-i2c.0",
.retries = 5,
},
};
+#define res_len(r) ((r)->end - (r)->start + 1)
static int i2c_pxa_probe(struct platform_device *dev)
{
struct pxa_i2c *i2c = &i2c_pxa;
+ struct resource *res;
#ifdef CONFIG_I2C_PXA_SLAVE
struct i2c_pxa_platform_data *plat = dev->dev.platform_data;
#endif
int ret;
+ int irq;
-#ifdef CONFIG_PXA27x
- pxa_gpio_mode(GPIO117_I2CSCL_MD);
- pxa_gpio_mode(GPIO118_I2CSDA_MD);
- udelay(100);
-#endif
+ res = platform_get_resource(dev, IORESOURCE_MEM, 0);
+ irq = platform_get_irq(dev, 0);
+ if (res == NULL || irq < 0)
+ return -ENODEV;
+
+ if (!request_mem_region(res->start, res_len(res), res->name))
+ return -ENOMEM;
+
+ i2c = kmalloc(sizeof(struct pxa_i2c), GFP_KERNEL);
+ if (!i2c) {
+ ret = -ENOMEM;
+ goto emalloc;
+ }
+
+ memcpy(i2c, &i2c_pxa, sizeof(struct pxa_i2c));
+ init_waitqueue_head(&i2c->wait);
+ i2c->adap.name[strlen(i2c->adap.name) - 1] = '0' + dev->id % 10;
+
+ i2c->reg_base = ioremap(res->start, res_len(res));
+ if (!i2c->reg_base) {
+ ret = -EIO;
+ goto eremap;
+ }
+
+ i2c->iobase = res->start;
+ i2c->iosize = res_len(res);
+
+ i2c->irq = irq;
i2c->slave_addr = I2C_PXA_SLAVE_ADDR;
}
#endif
- pxa_set_cken(CKEN14_I2C, 1);
- ret = request_irq(IRQ_I2C, i2c_pxa_handler, IRQF_DISABLED,
- "pxa2xx-i2c", i2c);
+ switch (dev->id) {
+ case 0:
+#ifdef CONFIG_PXA27x
+ pxa_gpio_mode(GPIO117_I2CSCL_MD);
+ pxa_gpio_mode(GPIO118_I2CSDA_MD);
+#endif
+ pxa_set_cken(CKEN14_I2C, 1);
+ break;
+#ifdef CONFIG_PXA27x
+ case 1:
+ local_irq_disable();
+ PCFR |= PCFR_PI2CEN;
+ local_irq_enable();
+ pxa_set_cken(CKEN15_PWRI2C, 1);
+#endif
+ }
+
+ ret = request_irq(irq, i2c_pxa_handler, IRQF_DISABLED,
+ i2c->adap.name, i2c);
if (ret)
- goto out;
+ goto ereqirq;
+
i2c_pxa_reset(i2c);
ret = i2c_add_adapter(&i2c->adap);
if (ret < 0) {
printk(KERN_INFO "I2C: Failed to add bus\n");
- goto err_irq;
+ goto eadapt;
}
platform_set_drvdata(dev, i2c);
#endif
return 0;
- err_irq:
- free_irq(IRQ_I2C, i2c);
- out:
+eadapt:
+ free_irq(irq, i2c);
+ereqirq:
+ switch (dev->id) {
+ case 0:
+ pxa_set_cken(CKEN14_I2C, 0);
+ break;
+#ifdef CONFIG_PXA27x
+ case 1:
+ pxa_set_cken(CKEN15_PWRI2C, 0);
+ local_irq_disable();
+ PCFR &= ~PCFR_PI2CEN;
+ local_irq_enable();
+#endif
+ }
+eremap:
+ kfree(i2c);
+emalloc:
+ release_mem_region(res->start, res_len(res));
return ret;
}
platform_set_drvdata(dev, NULL);
i2c_del_adapter(&i2c->adap);
- free_irq(IRQ_I2C, i2c);
- pxa_set_cken(CKEN14_I2C, 0);
+ free_irq(i2c->irq, i2c);
+ switch (dev->id) {
+ case 0:
+ pxa_set_cken(CKEN14_I2C, 0);
+ break;
+#ifdef CONFIG_PXA27x
+ case 1:
+ pxa_set_cken(CKEN15_PWRI2C, 0);
+ local_irq_disable();
+ PCFR &= ~PCFR_PI2CEN;
+ local_irq_enable();
+#endif
+ }
+ release_mem_region(i2c->iobase, i2c->iosize);
+ kfree(i2c);
return 0;
}
#include <linux/err.h>
#include <linux/dma-mapping.h>
#include <linux/clk.h>
+#include <linux/atmel_pdc.h>
#include <linux/mmc/host.h>
#include <linux/mmc/protocol.h>
#include <asm/arch/cpu.h>
#include <asm/arch/gpio.h>
#include <asm/arch/at91_mci.h>
-#include <asm/arch/at91_pdc.h>
#define DRIVER_NAME "at91_mci"
/* Check to see if this needs filling */
if (i == 0) {
- if (at91_mci_read(host, AT91_PDC_RCR) != 0) {
+ if (at91_mci_read(host, ATMEL_PDC_RCR) != 0) {
pr_debug("Transfer active in current\n");
continue;
}
}
else {
- if (at91_mci_read(host, AT91_PDC_RNCR) != 0) {
+ if (at91_mci_read(host, ATMEL_PDC_RNCR) != 0) {
pr_debug("Transfer active in next\n");
continue;
}
pr_debug("dma address = %08X, length = %d\n", sg->dma_address, sg->length);
if (i == 0) {
- at91_mci_write(host, AT91_PDC_RPR, sg->dma_address);
- at91_mci_write(host, AT91_PDC_RCR, sg->length / 4);
+ at91_mci_write(host, ATMEL_PDC_RPR, sg->dma_address);
+ at91_mci_write(host, ATMEL_PDC_RCR, sg->length / 4);
}
else {
- at91_mci_write(host, AT91_PDC_RNPR, sg->dma_address);
- at91_mci_write(host, AT91_PDC_RNCR, sg->length / 4);
+ at91_mci_write(host, ATMEL_PDC_RNPR, sg->dma_address);
+ at91_mci_write(host, ATMEL_PDC_RNCR, sg->length / 4);
}
}
at91mci_pre_dma_read(host);
else {
at91_mci_write(host, AT91_MCI_IER, AT91_MCI_RXBUFF);
- at91_mci_write(host, AT91_PDC_PTCR, AT91_PDC_RXTDIS | AT91_PDC_TXTDIS);
+ at91_mci_write(host, ATMEL_PDC_PTCR, ATMEL_PDC_RXTDIS | ATMEL_PDC_TXTDIS);
}
pr_debug("post dma read done\n");
pr_debug("Handling the transmit\n");
/* Disable the transfer */
- at91_mci_write(host, AT91_PDC_PTCR, AT91_PDC_RXTDIS | AT91_PDC_TXTDIS);
+ at91_mci_write(host, ATMEL_PDC_PTCR, ATMEL_PDC_RXTDIS | ATMEL_PDC_TXTDIS);
/* Now wait for cmd ready */
at91_mci_write(host, AT91_MCI_IDR, AT91_MCI_TXBUFE);
cmd->opcode, cmdr, cmd->arg, blocks, block_length, at91_mci_read(host, AT91_MCI_MR));
if (!data) {
- at91_mci_write(host, AT91_PDC_PTCR, AT91_PDC_TXTDIS | AT91_PDC_RXTDIS);
- at91_mci_write(host, AT91_PDC_RPR, 0);
- at91_mci_write(host, AT91_PDC_RCR, 0);
- at91_mci_write(host, AT91_PDC_RNPR, 0);
- at91_mci_write(host, AT91_PDC_RNCR, 0);
- at91_mci_write(host, AT91_PDC_TPR, 0);
- at91_mci_write(host, AT91_PDC_TCR, 0);
- at91_mci_write(host, AT91_PDC_TNPR, 0);
- at91_mci_write(host, AT91_PDC_TNCR, 0);
+ at91_mci_write(host, ATMEL_PDC_PTCR, ATMEL_PDC_TXTDIS | ATMEL_PDC_RXTDIS);
+ at91_mci_write(host, ATMEL_PDC_RPR, 0);
+ at91_mci_write(host, ATMEL_PDC_RCR, 0);
+ at91_mci_write(host, ATMEL_PDC_RNPR, 0);
+ at91_mci_write(host, ATMEL_PDC_RNCR, 0);
+ at91_mci_write(host, ATMEL_PDC_TPR, 0);
+ at91_mci_write(host, ATMEL_PDC_TCR, 0);
+ at91_mci_write(host, ATMEL_PDC_TNPR, 0);
+ at91_mci_write(host, ATMEL_PDC_TNCR, 0);
at91_mci_write(host, AT91_MCI_ARGR, cmd->arg);
at91_mci_write(host, AT91_MCI_CMDR, cmdr);
/*
* Disable the PDC controller
*/
- at91_mci_write(host, AT91_PDC_PTCR, AT91_PDC_RXTDIS | AT91_PDC_TXTDIS);
+ at91_mci_write(host, ATMEL_PDC_PTCR, ATMEL_PDC_RXTDIS | ATMEL_PDC_TXTDIS);
if (cmdr & AT91_MCI_TRCMD_START) {
data->bytes_xfered = 0;
pr_debug("Transmitting %d bytes\n", host->total_length);
- at91_mci_write(host, AT91_PDC_TPR, host->physical_address);
- at91_mci_write(host, AT91_PDC_TCR, host->total_length / 4);
+ at91_mci_write(host, ATMEL_PDC_TPR, host->physical_address);
+ at91_mci_write(host, ATMEL_PDC_TCR, host->total_length / 4);
ier = AT91_MCI_TXBUFE;
}
}
if (cmdr & AT91_MCI_TRCMD_START) {
if (cmdr & AT91_MCI_TRDIR)
- at91_mci_write(host, AT91_PDC_PTCR, AT91_PDC_RXTEN);
+ at91_mci_write(host, ATMEL_PDC_PTCR, ATMEL_PDC_RXTEN);
else
- at91_mci_write(host, AT91_PDC_PTCR, AT91_PDC_TXTEN);
+ at91_mci_write(host, ATMEL_PDC_PTCR, ATMEL_PDC_TXTEN);
}
return ier;
}
select SERIAL_CORE
help
This selects the ARM(R) AMBA(R) PrimeCell PL010 UART. If you have
- an Integrator/AP or Integrator/PP2 platform, say Y or M here.
+ an Integrator/AP or Integrator/PP2 platform, or if you have a
+ Cirrus Logic EP93xx CPU, say Y or M here.
If unsure, say N.
#include <linux/sysrq.h>
#include <linux/tty_flip.h>
#include <linux/platform_device.h>
+#include <linux/atmel_pdc.h>
#include <asm/io.h>
#include <asm/mach/serial_at91.h>
#include <asm/arch/board.h>
-#include <asm/arch/at91_pdc.h>
+
#ifdef CONFIG_ARM
#include <asm/arch/cpu.h>
#include <asm/arch/gpio.h>
{
struct circ_buf *xmit = &sport->port.info->xmit;
- do {
+ while (!(UTS((u32)sport->port.membase) & UTS_TXFULL)) {
/* send xmit->buf[xmit->tail]
* out the port here */
URTX0((u32)sport->port.membase) = xmit->buf[xmit->tail];
sport->port.icount.tx++;
if (uart_circ_empty(xmit))
break;
- } while (!(UTS((u32)sport->port.membase) & UTS_TXFULL));
+ }
if (uart_circ_empty(xmit))
imx_stop_tx(&sport->port);
UCR1((u32)sport->port.membase) |= UCR1_TXMPTYEN;
- if(UTS((u32)sport->port.membase) & UTS_TXEMPTY)
- imx_transmit_buffer(sport);
+ imx_transmit_buffer(sport);
}
static irqreturn_t imx_rtsint(int irq, void *dev_id)
if (retval) goto error_out2;
retval = request_irq(sport->rtsirq, imx_rtsint,
- IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
+ (sport->rtsirq < IMX_IRQS) ? 0 :
+ IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
DRIVER_NAME, sport);
if (retval) goto error_out3;
.mapbase = IMX_UART1_BASE, /* FIXME */
.irq = UART1_MINT_RX,
.uartclk = 16000000,
- .fifosize = 8,
+ .fifosize = 32,
.flags = UPF_BOOT_AUTOCONF,
.ops = &imx_pops,
.line = 0,
.mapbase = IMX_UART2_BASE, /* FIXME */
.irq = UART2_MINT_RX,
.uartclk = 16000000,
- .fifosize = 8,
+ .fifosize = 32,
.flags = UPF_BOOT_AUTOCONF,
.ops = &imx_pops,
.line = 1,
at91_udp_write(udc, AT91_UDP_TXVC, 0);
if (cpu_is_at91rm9200())
at91_set_gpio_value(udc->board.pullup_pin, 1);
- else if (cpu_is_at91sam9260()) {
+ else if (cpu_is_at91sam9260() || cpu_is_at91sam9263()) {
u32 txvc = at91_udp_read(udc, AT91_UDP_TXVC);
txvc |= AT91_UDP_TXVC_PUON;
at91_udp_write(udc, AT91_UDP_TXVC, AT91_UDP_TXVC_TXVDIS);
if (cpu_is_at91rm9200())
at91_set_gpio_value(udc->board.pullup_pin, 0);
- else if (cpu_is_at91sam9260()) {
+ else if (cpu_is_at91sam9260() || cpu_is_at91sam9263()) {
u32 txvc = at91_udp_read(udc, AT91_UDP_TXVC);
txvc &= ~AT91_UDP_TXVC_PUON;
struct pxa2xx_udc_mach_info *mach = the_controller->mach;
if (mach->gpio_vbus)
- return pxa_gpio_get(mach->gpio_vbus);
+ return udc_gpio_get(mach->gpio_vbus);
if (mach->udc_is_connected)
return mach->udc_is_connected();
return 1;
struct pxa2xx_udc_mach_info *mach = the_controller->mach;
if (mach->gpio_pullup)
- pxa_gpio_set(mach->gpio_pullup, 0);
+ udc_gpio_set(mach->gpio_pullup, 0);
else if (mach->udc_command)
mach->udc_command(PXA2XX_UDC_CMD_DISCONNECT);
}
struct pxa2xx_udc_mach_info *mach = the_controller->mach;
if (mach->gpio_pullup)
- pxa_gpio_set(mach->gpio_pullup, 1);
+ udc_gpio_set(mach->gpio_pullup, 1);
else if (mach->udc_command)
mach->udc_command(PXA2XX_UDC_CMD_CONNECT);
}
static irqreturn_t udc_vbus_irq(int irq, void *_dev)
{
struct pxa2xx_udc *dev = _dev;
- int vbus = pxa_gpio_get(dev->mach->gpio_vbus);
+ int vbus = udc_gpio_get(dev->mach->gpio_vbus);
pxa2xx_udc_vbus_session(&dev->gadget, vbus);
return IRQ_HANDLED;
dev->dev = &pdev->dev;
dev->mach = pdev->dev.platform_data;
if (dev->mach->gpio_vbus) {
- vbus_irq = IRQ_GPIO(dev->mach->gpio_vbus & GPIO_MD_MASK_NR);
- pxa_gpio_mode((dev->mach->gpio_vbus & GPIO_MD_MASK_NR)
- | GPIO_IN);
+ udc_gpio_init_vbus(dev->mach->gpio_vbus);
+ vbus_irq = udc_gpio_to_irq(dev->mach->gpio_vbus);
set_irq_type(vbus_irq, IRQT_BOTHEDGE);
} else
vbus_irq = 0;
if (dev->mach->gpio_pullup)
- pxa_gpio_mode((dev->mach->gpio_pullup & GPIO_MD_MASK_NR)
- | GPIO_OUT | GPIO_DFLT_LOW);
+ udc_gpio_init_pullup(dev->mach->gpio_pullup);
init_timer(&dev->timer);
dev->timer.function = udc_watchdog;
static struct pxa2xx_udc *the_controller;
-static inline int pxa_gpio_get(unsigned gpio)
-{
- return (GPLR(gpio) & GPIO_bit(gpio)) != 0;
-}
-
-static inline void pxa_gpio_set(unsigned gpio, int is_on)
-{
- int mask = GPIO_bit(gpio);
-
- if (is_on)
- GPSR(gpio) = mask;
- else
- GPCR(gpio) = mask;
-}
-
/*-------------------------------------------------------------------------*/
/*
--- /dev/null
+arch
+mach-types.h
/*
- * include/asm-arm/arch-at91rm9200/at91_aic.h
+ * include/asm-arm/arch-at91/at91_aic.h
*
* Copyright (C) 2005 Ivan Kokshaysky
* Copyright (C) SAN People
/*
- * include/asm-arm/arch-at91rm9200/at91_dbgu.h
+ * include/asm-arm/arch-at91/at91_dbgu.h
*
* Copyright (C) 2005 Ivan Kokshaysky
* Copyright (C) SAN People
#define AT91_CIDR_NVPSIZ (0xf << 8) /* Nonvolatile Program Memory Size */
#define AT91_CIDR_NVPSIZ2 (0xf << 12) /* Second Nonvolatile Program Memory Size */
#define AT91_CIDR_SRAMSIZ (0xf << 16) /* Internal SRAM Size */
+#define AT91_CIDR_SRAMSIZ_1K (1 << 16)
+#define AT91_CIDR_SRAMSIZ_2K (2 << 16)
+#define AT91_CIDR_SRAMSIZ_112K (4 << 16)
+#define AT91_CIDR_SRAMSIZ_4K (5 << 16)
+#define AT91_CIDR_SRAMSIZ_80K (6 << 16)
+#define AT91_CIDR_SRAMSIZ_160K (7 << 16)
+#define AT91_CIDR_SRAMSIZ_8K (8 << 16)
+#define AT91_CIDR_SRAMSIZ_16K (9 << 16)
+#define AT91_CIDR_SRAMSIZ_32K (10 << 16)
+#define AT91_CIDR_SRAMSIZ_64K (11 << 16)
+#define AT91_CIDR_SRAMSIZ_128K (12 << 16)
+#define AT91_CIDR_SRAMSIZ_256K (13 << 16)
+#define AT91_CIDR_SRAMSIZ_96K (14 << 16)
+#define AT91_CIDR_SRAMSIZ_512K (15 << 16)
#define AT91_CIDR_ARCH (0xff << 20) /* Architecture Identifier */
#define AT91_CIDR_NVPTYP (7 << 28) /* Nonvolatile Program Memory Type */
#define AT91_CIDR_EXT (1 << 31) /* Extension Flag */
/*
- * include/asm-arm/arch-at91rm9200/at91_ecc.h
+ * include/asm-arm/arch-at91/at91_ecc.h
*
* Error Corrected Code Controller (ECC) - System peripherals regsters.
* Based on AT91SAM9260 datasheet revision B.
/*
- * include/asm-arm/arch-at91rm9200/at91_lcdc.h
+ * include/asm-arm/arch-at91/at91_lcdc.h
*
* LCD Controller (LCDC).
* Based on AT91SAM9261 datasheet revision E.
/*
- * include/asm-arm/arch-at91rm9200/at91_mci.h
+ * include/asm-arm/arch-at91/at91_mci.h
*
* Copyright (C) 2005 Ivan Kokshaysky
* Copyright (C) SAN People
/*
- * include/asm-arm/arch-at91rm9200/at91_pio.h
+ * include/asm-arm/arch-at91/at91_pio.h
*
* Copyright (C) 2005 Ivan Kokshaysky
* Copyright (C) SAN People
/*
- * include/asm-arm/arch-at91rm9200/at91_pit.h
+ * include/asm-arm/arch-at91/at91_pit.h
*
* Periodic Interval Timer (PIT) - System peripherals regsters.
* Based on AT91SAM9261 datasheet revision D.
/*
- * include/asm-arm/arch-at91rm9200/at91_pmc.h
+ * include/asm-arm/arch-at91/at91_pmc.h
*
* Copyright (C) 2005 Ivan Kokshaysky
* Copyright (C) SAN People
/*
- * include/asm-arm/arch-at91rm9200/at91_rstc.h
+ * include/asm-arm/arch-at91/at91_rstc.h
*
* Reset Controller (RSTC) - System peripherals regsters.
* Based on AT91SAM9261 datasheet revision D.
#define AT91_RSTC_PROCRST (1 << 0) /* Processor Reset */
#define AT91_RSTC_PERRST (1 << 2) /* Peripheral Reset */
#define AT91_RSTC_EXTRST (1 << 3) /* External Reset */
-#define AT91_RSTC_KEY (0xff << 24) /* KEY Password */
+#define AT91_RSTC_KEY (0xa5 << 24) /* KEY Password */
#define AT91_RSTC_SR (AT91_RSTC + 0x04) /* Reset Controller Status Register */
#define AT91_RSTC_URSTS (1 << 0) /* User Reset Status */
#define AT91_RSTC_URSTEN (1 << 0) /* User Reset Enable */
#define AT91_RSTC_URSTIEN (1 << 4) /* User Reset Interrupt Enable */
#define AT91_RSTC_ERSTL (0xf << 8) /* External Reset Length */
-#define AT91_RSTC_KEY (0xff << 24) /* KEY Password */
#endif
/*
- * include/asm-arm/arch-at91rm9200/at91_rtc.h
+ * include/asm-arm/arch-at91/at91_rtc.h
*
* Copyright (C) 2005 Ivan Kokshaysky
* Copyright (C) SAN People
/*
- * include/asm-arm/arch-at91rm9200/at91_rtt.h
+ * include/asm-arm/arch-at91/at91_rtt.h
*
* Real-time Timer (RTT) - System peripherals regsters.
* Based on AT91SAM9261 datasheet revision D.
/*
- * include/asm-arm/arch-at91rm9200/at91_shdwc.h
+ * include/asm-arm/arch-at91/at91_shdwc.h
*
* Shutdown Controller (SHDWC) - System peripherals regsters.
* Based on AT91SAM9261 datasheet revision D.
/*
- * include/asm-arm/arch-at91rm9200/at91_spi.h
+ * include/asm-arm/arch-at91/at91_spi.h
*
* Copyright (C) 2005 Ivan Kokshaysky
* Copyright (C) SAN People
/*
- * include/asm-arm/arch-at91rm9200/at91_ssc.h
+ * include/asm-arm/arch-at91/at91_ssc.h
*
* Copyright (C) SAN People
*
/*
- * include/asm-arm/arch-at91rm9200/at91_st.h
+ * include/asm-arm/arch-at91/at91_st.h
*
* Copyright (C) 2005 Ivan Kokshaysky
* Copyright (C) SAN People
/*
- * include/asm-arm/arch-at91rm9200/at91_tc.h
+ * include/asm-arm/arch-at91/at91_tc.h
*
* Copyright (C) SAN People
*
/*
- * include/asm-arm/arch-at91rm9200/at91_twi.h
+ * include/asm-arm/arch-at91/at91_twi.h
*
* Copyright (C) 2005 Ivan Kokshaysky
* Copyright (C) SAN People
/*
- * include/asm-arm/arch-at91rm9200/at91_wdt.h
+ * include/asm-arm/arch-at91/at91_wdt.h
*
* Watchdog Timer (WDT) - System peripherals regsters.
* Based on AT91SAM9261 datasheet revision D.
/*
- * include/asm-arm/arch-at91rm9200/at91rm9200.h
+ * include/asm-arm/arch-at91/at91rm9200.h
*
* Copyright (C) 2005 Ivan Kokshaysky
* Copyright (C) SAN People
/*
- * include/asm-arm/arch-at91rm9200/at91rm9200_emac.h
+ * include/asm-arm/arch-at91/at91rm9200_emac.h
*
* Copyright (C) 2005 Ivan Kokshaysky
* Copyright (C) SAN People
/*
- * include/asm-arm/arch-at91rm9200/at91rm9200_mc.h
+ * include/asm-arm/arch-at91/at91rm9200_mc.h
*
* Copyright (C) 2005 Ivan Kokshaysky
* Copyright (C) SAN People
/*
- * include/asm-arm/arch-at91rm9200/at91sam9260.h
+ * include/asm-arm/arch-at91/at91sam9260.h
*
* (C) 2006 Andrew Victor
*
#define AT91SAM9260_UHP_BASE 0x00500000 /* USB Host controller */
+#define AT91SAM9XE_FLASH_BASE 0x00200000 /* Internal FLASH base address */
+#define AT91SAM9XE_SRAM_BASE 0x00300000 /* Internal SRAM base address */
+
+
#if 0
/*
* PIO pin definitions (peripheral A/B multiplexing).
/*
- * include/asm-arm/arch-at91rm9200/at91sam9260_matrix.h
+ * include/asm-arm/arch-at91/at91sam9260_matrix.h
*
* Memory Controllers (MATRIX, EBI) - System peripherals registers.
* Based on AT91SAM9260 datasheet revision B.
#define AT91_MATRIX_MCFG2 (AT91_MATRIX + 0x08) /* Master Configuration Register 2 */
#define AT91_MATRIX_MCFG3 (AT91_MATRIX + 0x0C) /* Master Configuration Register 3 */
#define AT91_MATRIX_MCFG4 (AT91_MATRIX + 0x10) /* Master Configuration Register 4 */
-#define AT91_MATRIX_MCFG5 (AT91_MATRIX + 0x04) /* Master Configuration Register 5 */
+#define AT91_MATRIX_MCFG5 (AT91_MATRIX + 0x14) /* Master Configuration Register 5 */
#define AT91_MATRIX_ULBT (7 << 0) /* Undefined Length Burst Type */
#define AT91_MATRIX_ULBT_INFINITE (0 << 0)
#define AT91_MATRIX_ULBT_SINGLE (1 << 0)
/*
- * include/asm-arm/arch-at91rm9200/at91sam9261.h
+ * include/asm-arm/arch-at91/at91sam9261.h
*
* Copyright (C) SAN People
*
/*
- * include/asm-arm/arch-at91rm9200/at91sam9261_matrix.h
+ * include/asm-arm/arch-at91/at91sam9261_matrix.h
*
* Memory Controllers (MATRIX, EBI) - System peripherals registers.
* Based on AT91SAM9261 datasheet revision D.
--- /dev/null
+/*
+ * include/asm-arm/arch-at91/at91sam9263.h
+ *
+ * (C) 2007 Atmel Corporation.
+ *
+ * Common definitions.
+ * Based on AT91SAM9263 datasheet revision B (Preliminary).
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91SAM9263_H
+#define AT91SAM9263_H
+
+/*
+ * Peripheral identifiers/interrupts.
+ */
+#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */
+#define AT91_ID_SYS 1 /* System Peripherals */
+#define AT91SAM9263_ID_PIOA 2 /* Parallel IO Controller A */
+#define AT91SAM9263_ID_PIOB 3 /* Parallel IO Controller B */
+#define AT91SAM9263_ID_PIOCDE 4 /* Parallel IO Controller C, D and E */
+#define AT91SAM9263_ID_US0 7 /* USART 0 */
+#define AT91SAM9263_ID_US1 8 /* USART 1 */
+#define AT91SAM9263_ID_US2 9 /* USART 2 */
+#define AT91SAM9263_ID_MCI0 10 /* Multimedia Card Interface 0 */
+#define AT91SAM9263_ID_MCI1 11 /* Multimedia Card Interface 1 */
+#define AT91SAM9263_ID_CAN 12 /* CAN */
+#define AT91SAM9263_ID_TWI 13 /* Two-Wire Interface */
+#define AT91SAM9263_ID_SPI0 14 /* Serial Peripheral Interface 0 */
+#define AT91SAM9263_ID_SPI1 15 /* Serial Peripheral Interface 1 */
+#define AT91SAM9263_ID_SSC0 16 /* Serial Synchronous Controller 0 */
+#define AT91SAM9263_ID_SSC1 17 /* Serial Synchronous Controller 1 */
+#define AT91SAM9263_ID_AC97C 18 /* AC97 Controller */
+#define AT91SAM9263_ID_TCB 19 /* Timer Counter 0, 1 and 2 */
+#define AT91SAM9263_ID_PWMC 20 /* Pulse Width Modulation Controller */
+#define AT91SAM9263_ID_EMAC 21 /* Ethernet */
+#define AT91SAM9263_ID_2DGE 23 /* 2D Graphic Engine */
+#define AT91SAM9263_ID_UDP 24 /* USB Device Port */
+#define AT91SAM9263_ID_ISI 25 /* Image Sensor Interface */
+#define AT91SAM9263_ID_LCDC 26 /* LCD Controller */
+#define AT91SAM9263_ID_DMA 27 /* DMA Controller */
+#define AT91SAM9263_ID_UHP 29 /* USB Host port */
+#define AT91SAM9263_ID_IRQ0 30 /* Advanced Interrupt Controller (IRQ0) */
+#define AT91SAM9263_ID_IRQ1 31 /* Advanced Interrupt Controller (IRQ1) */
+
+
+/*
+ * User Peripheral physical base addresses.
+ */
+#define AT91SAM9263_BASE_UDP 0xfff78000
+#define AT91SAM9263_BASE_TCB0 0xfff7c000
+#define AT91SAM9263_BASE_TC0 0xfff7c000
+#define AT91SAM9263_BASE_TC1 0xfff7c040
+#define AT91SAM9263_BASE_TC2 0xfff7c080
+#define AT91SAM9263_BASE_MCI0 0xfff80000
+#define AT91SAM9263_BASE_MCI1 0xfff84000
+#define AT91SAM9263_BASE_TWI 0xfff88000
+#define AT91SAM9263_BASE_US0 0xfff8c000
+#define AT91SAM9263_BASE_US1 0xfff90000
+#define AT91SAM9263_BASE_US2 0xfff94000
+#define AT91SAM9263_BASE_SSC0 0xfff98000
+#define AT91SAM9263_BASE_SSC1 0xfff9c000
+#define AT91SAM9263_BASE_AC97C 0xfffa0000
+#define AT91SAM9263_BASE_SPI0 0xfffa4000
+#define AT91SAM9263_BASE_SPI1 0xfffa8000
+#define AT91SAM9263_BASE_CAN 0xfffac000
+#define AT91SAM9263_BASE_PWMC 0xfffb8000
+#define AT91SAM9263_BASE_EMAC 0xfffbc000
+#define AT91SAM9263_BASE_ISI 0xfffc4000
+#define AT91SAM9263_BASE_2DGE 0xfffc8000
+#define AT91_BASE_SYS 0xffffe000
+
+/*
+ * System Peripherals (offset from AT91_BASE_SYS)
+ */
+#define AT91_ECC0 (0xffffe000 - AT91_BASE_SYS)
+#define AT91_SDRAMC0 (0xffffe200 - AT91_BASE_SYS)
+#define AT91_SMC0 (0xffffe400 - AT91_BASE_SYS)
+#define AT91_ECC1 (0xffffe600 - AT91_BASE_SYS)
+#define AT91_SDRAMC1 (0xffffe800 - AT91_BASE_SYS)
+#define AT91_SMC1 (0xffffea00 - AT91_BASE_SYS)
+#define AT91_MATRIX (0xffffec00 - AT91_BASE_SYS)
+#define AT91_CCFG (0xffffed10 - AT91_BASE_SYS)
+#define AT91_DBGU (0xffffee00 - AT91_BASE_SYS)
+#define AT91_AIC (0xfffff000 - AT91_BASE_SYS)
+#define AT91_PIOA (0xfffff200 - AT91_BASE_SYS)
+#define AT91_PIOB (0xfffff400 - AT91_BASE_SYS)
+#define AT91_PIOC (0xfffff600 - AT91_BASE_SYS)
+#define AT91_PIOD (0xfffff800 - AT91_BASE_SYS)
+#define AT91_PIOE (0xfffffa00 - AT91_BASE_SYS)
+#define AT91_PMC (0xfffffc00 - AT91_BASE_SYS)
+#define AT91_RSTC (0xfffffd00 - AT91_BASE_SYS)
+#define AT91_SHDWC (0xfffffd10 - AT91_BASE_SYS)
+#define AT91_RTT0 (0xfffffd20 - AT91_BASE_SYS)
+#define AT91_PIT (0xfffffd30 - AT91_BASE_SYS)
+#define AT91_WDT (0xfffffd40 - AT91_BASE_SYS)
+#define AT91_RTT1 (0xfffffd50 - AT91_BASE_SYS)
+#define AT91_GPBR (0xfffffd60 - AT91_BASE_SYS)
+
+#define AT91_SMC AT91_SMC0
+
+/*
+ * Internal Memory.
+ */
+#define AT91SAM9263_SRAM0_BASE 0x00300000 /* Internal SRAM 0 base address */
+#define AT91SAM9263_SRAM0_SIZE (80 * SZ_1K) /* Internal SRAM 0 size (80Kb) */
+
+#define AT91SAM9263_ROM_BASE 0x00400000 /* Internal ROM base address */
+#define AT91SAM9263_ROM_SIZE SZ_128K /* Internal ROM size (128Kb) */
+
+#define AT91SAM9263_SRAM1_BASE 0x00500000 /* Internal SRAM 1 base address */
+#define AT91SAM9263_SRAM1_SIZE SZ_16K /* Internal SRAM 1 size (16Kb) */
+
+#define AT91SAM9263_LCDC_BASE 0x00700000 /* LCD Controller */
+#define AT91SAM9263_DMAC_BASE 0x00800000 /* DMA Controller */
+#define AT91SAM9263_UHP_BASE 0x00a00000 /* USB Host controller */
+
+#if 0
+/*
+ * PIO pin definitions (peripheral A/B multiplexing).
+ */
+
+// TODO: Add
+
+#endif
+
+#endif
--- /dev/null
+/*
+ * include/asm-arm/arch-at91/at91sam9263_matrix.h
+ *
+ * Copyright (C) 2006 Atmel Corporation.
+ *
+ * Memory Controllers (MATRIX, EBI) - System peripherals registers.
+ * Based on AT91SAM9263 datasheet revision B (Preliminary).
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91SAM9263_MATRIX_H
+#define AT91SAM9263_MATRIX_H
+
+#define AT91_MATRIX_MCFG0 (AT91_MATRIX + 0x00) /* Master Configuration Register 0 */
+#define AT91_MATRIX_MCFG1 (AT91_MATRIX + 0x04) /* Master Configuration Register 1 */
+#define AT91_MATRIX_MCFG2 (AT91_MATRIX + 0x08) /* Master Configuration Register 2 */
+#define AT91_MATRIX_MCFG3 (AT91_MATRIX + 0x0C) /* Master Configuration Register 3 */
+#define AT91_MATRIX_MCFG4 (AT91_MATRIX + 0x10) /* Master Configuration Register 4 */
+#define AT91_MATRIX_MCFG5 (AT91_MATRIX + 0x14) /* Master Configuration Register 5 */
+#define AT91_MATRIX_MCFG6 (AT91_MATRIX + 0x18) /* Master Configuration Register 6 */
+#define AT91_MATRIX_MCFG7 (AT91_MATRIX + 0x1C) /* Master Configuration Register 7 */
+#define AT91_MATRIX_MCFG8 (AT91_MATRIX + 0x20) /* Master Configuration Register 8 */
+#define AT91_MATRIX_ULBT (7 << 0) /* Undefined Length Burst Type */
+#define AT91_MATRIX_ULBT_INFINITE (0 << 0)
+#define AT91_MATRIX_ULBT_SINGLE (1 << 0)
+#define AT91_MATRIX_ULBT_FOUR (2 << 0)
+#define AT91_MATRIX_ULBT_EIGHT (3 << 0)
+#define AT91_MATRIX_ULBT_SIXTEEN (4 << 0)
+
+#define AT91_MATRIX_SCFG0 (AT91_MATRIX + 0x40) /* Slave Configuration Register 0 */
+#define AT91_MATRIX_SCFG1 (AT91_MATRIX + 0x44) /* Slave Configuration Register 1 */
+#define AT91_MATRIX_SCFG2 (AT91_MATRIX + 0x48) /* Slave Configuration Register 2 */
+#define AT91_MATRIX_SCFG3 (AT91_MATRIX + 0x4C) /* Slave Configuration Register 3 */
+#define AT91_MATRIX_SCFG4 (AT91_MATRIX + 0x50) /* Slave Configuration Register 4 */
+#define AT91_MATRIX_SCFG5 (AT91_MATRIX + 0x54) /* Slave Configuration Register 5 */
+#define AT91_MATRIX_SCFG6 (AT91_MATRIX + 0x58) /* Slave Configuration Register 6 */
+#define AT91_MATRIX_SCFG7 (AT91_MATRIX + 0x5C) /* Slave Configuration Register 7 */
+#define AT91_MATRIX_SLOT_CYCLE (0xff << 0) /* Maximum Number of Allowed Cycles for a Burst */
+#define AT91_MATRIX_DEFMSTR_TYPE (3 << 16) /* Default Master Type */
+#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16)
+#define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16)
+#define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16)
+#define AT91_MATRIX_FIXED_DEFMSTR (7 << 18) /* Fixed Index of Default Master */
+#define AT91_MATRIX_ARBT (3 << 24) /* Arbitration Type */
+#define AT91_MATRIX_ARBT_ROUND_ROBIN (0 << 24)
+#define AT91_MATRIX_ARBT_FIXED_PRIORITY (1 << 24)
+
+#define AT91_MATRIX_PRAS0 (AT91_MATRIX + 0x80) /* Priority Register A for Slave 0 */
+#define AT91_MATRIX_PRBS0 (AT91_MATRIX + 0x84) /* Priority Register B for Slave 0 */
+#define AT91_MATRIX_PRAS1 (AT91_MATRIX + 0x88) /* Priority Register A for Slave 1 */
+#define AT91_MATRIX_PRBS1 (AT91_MATRIX + 0x8C) /* Priority Register B for Slave 1 */
+#define AT91_MATRIX_PRAS2 (AT91_MATRIX + 0x90) /* Priority Register A for Slave 2 */
+#define AT91_MATRIX_PRBS2 (AT91_MATRIX + 0x94) /* Priority Register B for Slave 2 */
+#define AT91_MATRIX_PRAS3 (AT91_MATRIX + 0x98) /* Priority Register A for Slave 3 */
+#define AT91_MATRIX_PRBS3 (AT91_MATRIX + 0x9C) /* Priority Register B for Slave 3 */
+#define AT91_MATRIX_PRAS4 (AT91_MATRIX + 0xA0) /* Priority Register A for Slave 4 */
+#define AT91_MATRIX_PRBS4 (AT91_MATRIX + 0xA4) /* Priority Register B for Slave 4 */
+#define AT91_MATRIX_PRAS5 (AT91_MATRIX + 0xA8) /* Priority Register A for Slave 5 */
+#define AT91_MATRIX_PRBS5 (AT91_MATRIX + 0xAC) /* Priority Register B for Slave 5 */
+#define AT91_MATRIX_PRAS6 (AT91_MATRIX + 0xB0) /* Priority Register A for Slave 6 */
+#define AT91_MATRIX_PRBS6 (AT91_MATRIX + 0xB4) /* Priority Register B for Slave 6 */
+#define AT91_MATRIX_PRAS7 (AT91_MATRIX + 0xB8) /* Priority Register A for Slave 7 */
+#define AT91_MATRIX_PRBS7 (AT91_MATRIX + 0xBC) /* Priority Register B for Slave 7 */
+#define AT91_MATRIX_M0PR (3 << 0) /* Master 0 Priority */
+#define AT91_MATRIX_M1PR (3 << 4) /* Master 1 Priority */
+#define AT91_MATRIX_M2PR (3 << 8) /* Master 2 Priority */
+#define AT91_MATRIX_M3PR (3 << 12) /* Master 3 Priority */
+#define AT91_MATRIX_M4PR (3 << 16) /* Master 4 Priority */
+#define AT91_MATRIX_M5PR (3 << 20) /* Master 5 Priority */
+#define AT91_MATRIX_M6PR (3 << 24) /* Master 6 Priority */
+#define AT91_MATRIX_M7PR (3 << 28) /* Master 7 Priority */
+#define AT91_MATRIX_M8PR (3 << 0) /* Master 8 Priority (in Register B) */
+
+#define AT91_MATRIX_MRCR (AT91_MATRIX + 0x100) /* Master Remap Control Register */
+#define AT91_MATRIX_RCB0 (1 << 0) /* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */
+#define AT91_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
+#define AT91_MATRIX_RCB2 (1 << 2)
+#define AT91_MATRIX_RCB3 (1 << 3)
+#define AT91_MATRIX_RCB4 (1 << 4)
+#define AT91_MATRIX_RCB5 (1 << 5)
+#define AT91_MATRIX_RCB6 (1 << 6)
+#define AT91_MATRIX_RCB7 (1 << 7)
+#define AT91_MATRIX_RCB8 (1 << 8)
+
+#define AT91_MATRIX_TCMR (AT91_MATRIX + 0x114) /* TCM Configuration Register */
+#define AT91_MATRIX_ITCM_SIZE (0xf << 0) /* Size of ITCM enabled memory block */
+#define AT91_MATRIX_ITCM_0 (0 << 0)
+#define AT91_MATRIX_ITCM_16 (5 << 0)
+#define AT91_MATRIX_ITCM_32 (6 << 0)
+#define AT91_MATRIX_DTCM_SIZE (0xf << 4) /* Size of DTCM enabled memory block */
+#define AT91_MATRIX_DTCM_0 (0 << 4)
+#define AT91_MATRIX_DTCM_16 (5 << 4)
+#define AT91_MATRIX_DTCM_32 (6 << 4)
+
+#define AT91_MATRIX_EBI0CSA (AT91_MATRIX + 0x120) /* EBI0 Chip Select Assignment Register */
+#define AT91_MATRIX_EBI0_CS1A (1 << 1) /* Chip Select 1 Assignment */
+#define AT91_MATRIX_EBI0_CS1A_SMC (0 << 1)
+#define AT91_MATRIX_EBI0_CS1A_SDRAMC (1 << 1)
+#define AT91_MATRIX_EBI0_CS3A (1 << 3) /* Chip Select 3 Assignment */
+#define AT91_MATRIX_EBI0_CS3A_SMC (0 << 3)
+#define AT91_MATRIX_EBI0_CS3A_SMC_SMARTMEDIA (1 << 3)
+#define AT91_MATRIX_EBI0_CS4A (1 << 4) /* Chip Select 4 Assignment */
+#define AT91_MATRIX_EBI0_CS4A_SMC (0 << 4)
+#define AT91_MATRIX_EBI0_CS4A_SMC_CF1 (1 << 4)
+#define AT91_MATRIX_EBI0_CS5A (1 << 5) /* Chip Select 5 Assignment */
+#define AT91_MATRIX_EBI0_CS5A_SMC (0 << 5)
+#define AT91_MATRIX_EBI0_CS5A_SMC_CF2 (1 << 5)
+#define AT91_MATRIX_EBI0_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */
+#define AT91_MATRIX_EBI0_VDDIOMSEL (1 << 16) /* Memory voltage selection */
+#define AT91_MATRIX_EBI0_VDDIOMSEL_1_8V (0 << 16)
+#define AT91_MATRIX_EBI0_VDDIOMSEL_3_3V (1 << 16)
+
+#define AT91_MATRIX_EBI1CSA (AT91_MATRIX + 0x124) /* EBI1 Chip Select Assignment Register */
+#define AT91_MATRIX_EBI1_CS1A (1 << 1) /* Chip Select 1 Assignment */
+#define AT91_MATRIX_EBI1_CS1A_SMC (0 << 1)
+#define AT91_MATRIX_EBI1_CS1A_SDRAMC (1 << 1)
+#define AT91_MATRIX_EBI1_CS2A (1 << 3) /* Chip Select 3 Assignment */
+#define AT91_MATRIX_EBI1_CS2A_SMC (0 << 3)
+#define AT91_MATRIX_EBI1_CS2A_SMC_SMARTMEDIA (1 << 3)
+#define AT91_MATRIX_EBI1_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */
+#define AT91_MATRIX_EBI1_VDDIOMSEL (1 << 16) /* Memory voltage selection */
+#define AT91_MATRIX_EBI1_VDDIOMSEL_1_8V (0 << 16)
+#define AT91_MATRIX_EBI1_VDDIOMSEL_3_3V (1 << 16)
+
+#endif
/*
- * include/asm-arm/arch-at91rm9200/at91sam926x_mc.h
+ * include/asm-arm/arch-at91/at91sam926x_mc.h
*
* Memory Controllers (SMC, SDRAMC) - System peripherals registers.
* Based on AT91SAM9261 datasheet revision D.
#define AT91_SMC_PS_16 (2 << 28)
#define AT91_SMC_PS_32 (3 << 28)
+#if defined(AT91_SMC1) /* The AT91SAM9263 has 2 Static Memory contollers */
+#define AT91_SMC1_SETUP(n) (AT91_SMC1 + 0x00 + ((n)*0x10)) /* Setup Register for CS n */
+#define AT91_SMC1_PULSE(n) (AT91_SMC1 + 0x04 + ((n)*0x10)) /* Pulse Register for CS n */
+#define AT91_SMC1_CYCLE(n) (AT91_SMC1 + 0x08 + ((n)*0x10)) /* Cycle Register for CS n */
+#define AT91_SMC1_MODE(n) (AT91_SMC1 + 0x0c + ((n)*0x10)) /* Mode Register for CS n */
+#endif
+
#endif
/*
- * include/asm-arm/arch-at91rm9200/board.h
+ * include/asm-arm/arch-at91/board.h
*
* Copyright (C) 2005 HP Labs
*
u8 wp_pin; /* (SD) writeprotect detect */
u8 vcc_pin; /* power switching (high == on) */
};
-extern void __init at91_add_device_mmc(struct at91_mmc_data *data);
+extern void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data);
/* Ethernet */
struct at91_eth_data {
};
extern void __init at91_add_device_eth(struct at91_eth_data *data);
+#if defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9263)
+#define eth_platform_data at91_eth_data
+#endif
+
/* USB Host */
struct at91_usbh_data {
u8 ports; /* number of ports on root hub */
+ u8 vbus_pin[]; /* port power-control pin */
};
extern void __init at91_add_device_usbh(struct at91_usbh_data *data);
/*
- * include/asm-arm/arch-at91rm9200/cpu.h
+ * include/asm-arm/arch-at91/cpu.h
*
* Copyright (C) 2006 SAN People
*
#define ARCH_ID_AT91RM9200 0x09290780
#define ARCH_ID_AT91SAM9260 0x019803a0
#define ARCH_ID_AT91SAM9261 0x019703a0
+#define ARCH_ID_AT91SAM9263 0x019607a0
+#define ARCH_ID_AT91SAM9XE128 0x329973a0
+#define ARCH_ID_AT91SAM9XE256 0x329a93a0
+#define ARCH_ID_AT91SAM9XE512 0x329aa3a0
static inline unsigned long at91_cpu_identify(void)
{
}
+#define ARCH_FAMILY_AT91X92 0x09200000
+#define ARCH_FAMILY_AT91SAM9 0x01900000
+#define ARCH_FAMILY_AT91SAM9XE 0x02900000
+
+static inline unsigned long at91_arch_identify(void)
+{
+ return (at91_sys_read(AT91_DBGU_CIDR) & AT91_CIDR_ARCH);
+}
+
+
#ifdef CONFIG_ARCH_AT91RM9200
#define cpu_is_at91rm9200() (at91_cpu_identify() == ARCH_ID_AT91RM9200)
#else
#endif
#ifdef CONFIG_ARCH_AT91SAM9260
-#define cpu_is_at91sam9260() (at91_cpu_identify() == ARCH_ID_AT91SAM9260)
+#define cpu_is_at91sam9xe() (at91_arch_identify() == ARCH_FAMILY_AT91SAM9XE)
+#define cpu_is_at91sam9260() ((at91_cpu_identify() == ARCH_ID_AT91SAM9260) || cpu_is_at91sam9xe())
#else
+#define cpu_is_at91sam9xe() (0)
#define cpu_is_at91sam9260() (0)
#endif
#define cpu_is_at91sam9261() (0)
#endif
+#ifdef CONFIG_ARCH_AT91SAM9263
+#define cpu_is_at91sam9263() (at91_cpu_identify() == ARCH_ID_AT91SAM9263)
+#else
+#define cpu_is_at91sam9263() (0)
+#endif
+
#endif
--- /dev/null
+/*
+ * include/asm-arm/arch-at91/debug-macro.S
+ *
+ * Copyright (C) 2003-2005 SAN People
+ *
+ * Debugging macro include header
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+#include <asm/hardware.h>
+#include <asm/arch/at91_dbgu.h>
+
+ .macro addruart,rx
+ mrc p15, 0, \rx, c1, c0
+ tst \rx, #1 @ MMU enabled?
+ ldreq \rx, =(AT91_BASE_SYS + AT91_DBGU) @ System peripherals (phys address)
+ ldrne \rx, =(AT91_VA_BASE_SYS + AT91_DBGU) @ System peripherals (virt address)
+ .endm
+
+ .macro senduart,rd,rx
+ strb \rd, [\rx, #(AT91_DBGU_THR - AT91_DBGU)] @ Write to Transmitter Holding Register
+ .endm
+
+ .macro waituart,rd,rx
+1001: ldr \rd, [\rx, #(AT91_DBGU_SR - AT91_DBGU)] @ Read Status Register
+ tst \rd, #AT91_DBGU_TXRDY @ DBGU_TXRDY = 1 when ready to transmit
+ beq 1001b
+ .endm
+
+ .macro busyuart,rd,rx
+1001: ldr \rd, [\rx, #(AT91_DBGU_SR - AT91_DBGU)] @ Read Status Register
+ tst \rd, #AT91_DBGU_TXEMPTY @ DBGU_TXEMPTY = 1 when transmission complete
+ beq 1001b
+ .endm
+
/*
- * include/asm-arm/arch-at91rm9200/dma.h
+ * include/asm-arm/arch-at91/dma.h
*
* Copyright (C) 2003 SAN People
*
--- /dev/null
+/*
+ * include/asm-arm/arch-at91/entry-macro.S
+ *
+ * Copyright (C) 2003-2005 SAN People
+ *
+ * Low-level IRQ helper macros for AT91RM9200 platforms
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <asm/hardware.h>
+#include <asm/arch/at91_aic.h>
+
+ .macro disable_fiq
+ .endm
+
+ .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
+ ldr \base, =(AT91_VA_BASE_SYS + AT91_AIC) @ base virtual address of AIC peripheral
+ ldr \irqnr, [\base, #(AT91_AIC_IVR - AT91_AIC)] @ read IRQ vector register: de-asserts nIRQ to processor (and clears interrupt)
+ ldr \irqstat, [\base, #(AT91_AIC_ISR - AT91_AIC)] @ read interrupt source number
+ teq \irqstat, #0 @ ISR is 0 when no current interrupt, or spurious interrupt
+ streq \tmp, [\base, #(AT91_AIC_EOICR - AT91_AIC)] @ not going to be handled further, then ACK it now.
+ .endm
+
/*
- * include/asm-arm/arch-at91rm9200/gpio.h
+ * include/asm-arm/arch-at91/gpio.h
*
* Copyright (C) 2005 HP Labs
*
#define PIN_BASE NR_AIC_IRQS
-#define MAX_GPIO_BANKS 4
+#define MAX_GPIO_BANKS 5
/* these pin numbers double as IRQ numbers, like AT91xxx_ID_* values */
#define AT91_PIN_PA2 (PIN_BASE + 0x00 + 2)
#define AT91_PIN_PA3 (PIN_BASE + 0x00 + 3)
#define AT91_PIN_PA4 (PIN_BASE + 0x00 + 4)
-
#define AT91_PIN_PA5 (PIN_BASE + 0x00 + 5)
#define AT91_PIN_PA6 (PIN_BASE + 0x00 + 6)
#define AT91_PIN_PA7 (PIN_BASE + 0x00 + 7)
#define AT91_PIN_PA8 (PIN_BASE + 0x00 + 8)
#define AT91_PIN_PA9 (PIN_BASE + 0x00 + 9)
-
#define AT91_PIN_PA10 (PIN_BASE + 0x00 + 10)
#define AT91_PIN_PA11 (PIN_BASE + 0x00 + 11)
#define AT91_PIN_PA12 (PIN_BASE + 0x00 + 12)
#define AT91_PIN_PA13 (PIN_BASE + 0x00 + 13)
#define AT91_PIN_PA14 (PIN_BASE + 0x00 + 14)
-
#define AT91_PIN_PA15 (PIN_BASE + 0x00 + 15)
#define AT91_PIN_PA16 (PIN_BASE + 0x00 + 16)
#define AT91_PIN_PA17 (PIN_BASE + 0x00 + 17)
#define AT91_PIN_PA18 (PIN_BASE + 0x00 + 18)
#define AT91_PIN_PA19 (PIN_BASE + 0x00 + 19)
-
#define AT91_PIN_PA20 (PIN_BASE + 0x00 + 20)
#define AT91_PIN_PA21 (PIN_BASE + 0x00 + 21)
#define AT91_PIN_PA22 (PIN_BASE + 0x00 + 22)
#define AT91_PIN_PA23 (PIN_BASE + 0x00 + 23)
#define AT91_PIN_PA24 (PIN_BASE + 0x00 + 24)
-
#define AT91_PIN_PA25 (PIN_BASE + 0x00 + 25)
#define AT91_PIN_PA26 (PIN_BASE + 0x00 + 26)
#define AT91_PIN_PA27 (PIN_BASE + 0x00 + 27)
#define AT91_PIN_PA28 (PIN_BASE + 0x00 + 28)
#define AT91_PIN_PA29 (PIN_BASE + 0x00 + 29)
-
#define AT91_PIN_PA30 (PIN_BASE + 0x00 + 30)
#define AT91_PIN_PA31 (PIN_BASE + 0x00 + 31)
#define AT91_PIN_PB2 (PIN_BASE + 0x20 + 2)
#define AT91_PIN_PB3 (PIN_BASE + 0x20 + 3)
#define AT91_PIN_PB4 (PIN_BASE + 0x20 + 4)
-
#define AT91_PIN_PB5 (PIN_BASE + 0x20 + 5)
#define AT91_PIN_PB6 (PIN_BASE + 0x20 + 6)
#define AT91_PIN_PB7 (PIN_BASE + 0x20 + 7)
#define AT91_PIN_PB8 (PIN_BASE + 0x20 + 8)
#define AT91_PIN_PB9 (PIN_BASE + 0x20 + 9)
-
#define AT91_PIN_PB10 (PIN_BASE + 0x20 + 10)
#define AT91_PIN_PB11 (PIN_BASE + 0x20 + 11)
#define AT91_PIN_PB12 (PIN_BASE + 0x20 + 12)
#define AT91_PIN_PB13 (PIN_BASE + 0x20 + 13)
#define AT91_PIN_PB14 (PIN_BASE + 0x20 + 14)
-
#define AT91_PIN_PB15 (PIN_BASE + 0x20 + 15)
#define AT91_PIN_PB16 (PIN_BASE + 0x20 + 16)
#define AT91_PIN_PB17 (PIN_BASE + 0x20 + 17)
#define AT91_PIN_PB18 (PIN_BASE + 0x20 + 18)
#define AT91_PIN_PB19 (PIN_BASE + 0x20 + 19)
-
#define AT91_PIN_PB20 (PIN_BASE + 0x20 + 20)
#define AT91_PIN_PB21 (PIN_BASE + 0x20 + 21)
#define AT91_PIN_PB22 (PIN_BASE + 0x20 + 22)
#define AT91_PIN_PB23 (PIN_BASE + 0x20 + 23)
#define AT91_PIN_PB24 (PIN_BASE + 0x20 + 24)
-
#define AT91_PIN_PB25 (PIN_BASE + 0x20 + 25)
#define AT91_PIN_PB26 (PIN_BASE + 0x20 + 26)
#define AT91_PIN_PB27 (PIN_BASE + 0x20 + 27)
#define AT91_PIN_PB28 (PIN_BASE + 0x20 + 28)
#define AT91_PIN_PB29 (PIN_BASE + 0x20 + 29)
-
#define AT91_PIN_PB30 (PIN_BASE + 0x20 + 30)
#define AT91_PIN_PB31 (PIN_BASE + 0x20 + 31)
#define AT91_PIN_PC2 (PIN_BASE + 0x40 + 2)
#define AT91_PIN_PC3 (PIN_BASE + 0x40 + 3)
#define AT91_PIN_PC4 (PIN_BASE + 0x40 + 4)
-
#define AT91_PIN_PC5 (PIN_BASE + 0x40 + 5)
#define AT91_PIN_PC6 (PIN_BASE + 0x40 + 6)
#define AT91_PIN_PC7 (PIN_BASE + 0x40 + 7)
#define AT91_PIN_PC8 (PIN_BASE + 0x40 + 8)
#define AT91_PIN_PC9 (PIN_BASE + 0x40 + 9)
-
#define AT91_PIN_PC10 (PIN_BASE + 0x40 + 10)
#define AT91_PIN_PC11 (PIN_BASE + 0x40 + 11)
#define AT91_PIN_PC12 (PIN_BASE + 0x40 + 12)
#define AT91_PIN_PC13 (PIN_BASE + 0x40 + 13)
#define AT91_PIN_PC14 (PIN_BASE + 0x40 + 14)
-
#define AT91_PIN_PC15 (PIN_BASE + 0x40 + 15)
#define AT91_PIN_PC16 (PIN_BASE + 0x40 + 16)
#define AT91_PIN_PC17 (PIN_BASE + 0x40 + 17)
#define AT91_PIN_PC18 (PIN_BASE + 0x40 + 18)
#define AT91_PIN_PC19 (PIN_BASE + 0x40 + 19)
-
#define AT91_PIN_PC20 (PIN_BASE + 0x40 + 20)
#define AT91_PIN_PC21 (PIN_BASE + 0x40 + 21)
#define AT91_PIN_PC22 (PIN_BASE + 0x40 + 22)
#define AT91_PIN_PC23 (PIN_BASE + 0x40 + 23)
#define AT91_PIN_PC24 (PIN_BASE + 0x40 + 24)
-
#define AT91_PIN_PC25 (PIN_BASE + 0x40 + 25)
#define AT91_PIN_PC26 (PIN_BASE + 0x40 + 26)
#define AT91_PIN_PC27 (PIN_BASE + 0x40 + 27)
#define AT91_PIN_PC28 (PIN_BASE + 0x40 + 28)
#define AT91_PIN_PC29 (PIN_BASE + 0x40 + 29)
-
#define AT91_PIN_PC30 (PIN_BASE + 0x40 + 30)
#define AT91_PIN_PC31 (PIN_BASE + 0x40 + 31)
#define AT91_PIN_PD2 (PIN_BASE + 0x60 + 2)
#define AT91_PIN_PD3 (PIN_BASE + 0x60 + 3)
#define AT91_PIN_PD4 (PIN_BASE + 0x60 + 4)
-
#define AT91_PIN_PD5 (PIN_BASE + 0x60 + 5)
#define AT91_PIN_PD6 (PIN_BASE + 0x60 + 6)
#define AT91_PIN_PD7 (PIN_BASE + 0x60 + 7)
#define AT91_PIN_PD8 (PIN_BASE + 0x60 + 8)
#define AT91_PIN_PD9 (PIN_BASE + 0x60 + 9)
-
#define AT91_PIN_PD10 (PIN_BASE + 0x60 + 10)
#define AT91_PIN_PD11 (PIN_BASE + 0x60 + 11)
#define AT91_PIN_PD12 (PIN_BASE + 0x60 + 12)
#define AT91_PIN_PD13 (PIN_BASE + 0x60 + 13)
#define AT91_PIN_PD14 (PIN_BASE + 0x60 + 14)
-
#define AT91_PIN_PD15 (PIN_BASE + 0x60 + 15)
#define AT91_PIN_PD16 (PIN_BASE + 0x60 + 16)
#define AT91_PIN_PD17 (PIN_BASE + 0x60 + 17)
#define AT91_PIN_PD18 (PIN_BASE + 0x60 + 18)
#define AT91_PIN_PD19 (PIN_BASE + 0x60 + 19)
-
#define AT91_PIN_PD20 (PIN_BASE + 0x60 + 20)
#define AT91_PIN_PD21 (PIN_BASE + 0x60 + 21)
#define AT91_PIN_PD22 (PIN_BASE + 0x60 + 22)
#define AT91_PIN_PD23 (PIN_BASE + 0x60 + 23)
#define AT91_PIN_PD24 (PIN_BASE + 0x60 + 24)
-
#define AT91_PIN_PD25 (PIN_BASE + 0x60 + 25)
#define AT91_PIN_PD26 (PIN_BASE + 0x60 + 26)
#define AT91_PIN_PD27 (PIN_BASE + 0x60 + 27)
#define AT91_PIN_PD28 (PIN_BASE + 0x60 + 28)
#define AT91_PIN_PD29 (PIN_BASE + 0x60 + 29)
-
#define AT91_PIN_PD30 (PIN_BASE + 0x60 + 30)
#define AT91_PIN_PD31 (PIN_BASE + 0x60 + 31)
+#define AT91_PIN_PE0 (PIN_BASE + 0x80 + 0)
+#define AT91_PIN_PE1 (PIN_BASE + 0x80 + 1)
+#define AT91_PIN_PE2 (PIN_BASE + 0x80 + 2)
+#define AT91_PIN_PE3 (PIN_BASE + 0x80 + 3)
+#define AT91_PIN_PE4 (PIN_BASE + 0x80 + 4)
+#define AT91_PIN_PE5 (PIN_BASE + 0x80 + 5)
+#define AT91_PIN_PE6 (PIN_BASE + 0x80 + 6)
+#define AT91_PIN_PE7 (PIN_BASE + 0x80 + 7)
+#define AT91_PIN_PE8 (PIN_BASE + 0x80 + 8)
+#define AT91_PIN_PE9 (PIN_BASE + 0x80 + 9)
+#define AT91_PIN_PE10 (PIN_BASE + 0x80 + 10)
+#define AT91_PIN_PE11 (PIN_BASE + 0x80 + 11)
+#define AT91_PIN_PE12 (PIN_BASE + 0x80 + 12)
+#define AT91_PIN_PE13 (PIN_BASE + 0x80 + 13)
+#define AT91_PIN_PE14 (PIN_BASE + 0x80 + 14)
+#define AT91_PIN_PE15 (PIN_BASE + 0x80 + 15)
+#define AT91_PIN_PE16 (PIN_BASE + 0x80 + 16)
+#define AT91_PIN_PE17 (PIN_BASE + 0x80 + 17)
+#define AT91_PIN_PE18 (PIN_BASE + 0x80 + 18)
+#define AT91_PIN_PE19 (PIN_BASE + 0x80 + 19)
+#define AT91_PIN_PE20 (PIN_BASE + 0x80 + 20)
+#define AT91_PIN_PE21 (PIN_BASE + 0x80 + 21)
+#define AT91_PIN_PE22 (PIN_BASE + 0x80 + 22)
+#define AT91_PIN_PE23 (PIN_BASE + 0x80 + 23)
+#define AT91_PIN_PE24 (PIN_BASE + 0x80 + 24)
+#define AT91_PIN_PE25 (PIN_BASE + 0x80 + 25)
+#define AT91_PIN_PE26 (PIN_BASE + 0x80 + 26)
+#define AT91_PIN_PE27 (PIN_BASE + 0x80 + 27)
+#define AT91_PIN_PE28 (PIN_BASE + 0x80 + 28)
+#define AT91_PIN_PE29 (PIN_BASE + 0x80 + 29)
+#define AT91_PIN_PE30 (PIN_BASE + 0x80 + 30)
+#define AT91_PIN_PE31 (PIN_BASE + 0x80 + 31)
+
#ifndef __ASSEMBLY__
/* setup setup routines, called from board init or driver probe() */
extern int __init_or_module at91_set_GPIO_periph(unsigned pin, int use_pullup);
/*
- * include/asm-arm/arch-at91rm9200/hardware.h
+ * include/asm-arm/arch-at91/hardware.h
*
* Copyright (C) 2003 SAN People
* Copyright (C) 2003 ATMEL
#include <asm/arch/at91sam9260.h>
#elif defined(CONFIG_ARCH_AT91SAM9261)
#include <asm/arch/at91sam9261.h>
+#elif defined(CONFIG_ARCH_AT91SAM9263)
+#include <asm/arch/at91sam9263.h>
#else
#error "Unsupported AT91 processor"
#endif
/*
- * Remap the peripherals from address 0xFFFA0000 .. 0xFFFFFFFF
- * to 0xFEFA0000 .. 0xFF000000. (384Kb)
+ * Remap the peripherals from address 0xFFF78000 .. 0xFFFFFFFF
+ * to 0xFEF78000 .. 0xFF000000. (5444Kb)
*/
-#define AT91_IO_PHYS_BASE 0xFFFA0000
+#define AT91_IO_PHYS_BASE 0xFFF78000
#define AT91_IO_SIZE (0xFFFFFFFF - AT91_IO_PHYS_BASE + 1)
#define AT91_IO_VIRT_BASE (0xFF000000 - AT91_IO_SIZE)
/* Convert a physical IO address to virtual IO address */
-#define AT91_IO_P2V(x) ((x) - AT91_IO_PHYS_BASE + AT91_IO_VIRT_BASE)
+#define AT91_IO_P2V(x) ((x) - AT91_IO_PHYS_BASE + AT91_IO_VIRT_BASE)
/*
* Virtual to Physical Address mapping for IO devices.
/*
- * include/asm-arm/arch-at91rm9200/io.h
+ * include/asm-arm/arch-at91/io.h
*
* Copyright (C) 2003 SAN People
*
/*
- * include/asm-arm/arch-at91rm9200/irqs.h
+ * include/asm-arm/arch-at91/irqs.h
*
* Copyright (C) 2004 SAN People
*
* IRQ interrupt symbols are the AT91xxx_ID_* symbols
* for IRQs handled directly through the AIC, or else the AT91_PIN_*
* symbols in gpio.h for ones handled indirectly as GPIOs.
- * We make provision for 4 banks of GPIO.
+ * We make provision for 5 banks of GPIO.
*/
-#define NR_IRQS (NR_AIC_IRQS + (4 * 32))
+#define NR_IRQS (NR_AIC_IRQS + (5 * 32))
#endif
/*
- * include/asm-arm/arch-at91rm9200/memory.h
+ * include/asm-arm/arch-at91/memory.h
*
* Copyright (C) 2004 SAN People
*
/*
- * include/asm-arm/arch-at91rm9200/system.h
+ * include/asm-arm/arch-at91/system.h
*
* Copyright (C) 2003 SAN People
*
/*
- * include/asm-arm/arch-at91rm9200/timex.h
+ * include/asm-arm/arch-at91/timex.h
*
* Copyright (C) 2003 SAN People
*
#define AT91SAM9_MASTER_CLOCK 99300000
#define CLOCK_TICK_RATE (AT91SAM9_MASTER_CLOCK/16)
+#elif defined(CONFIG_ARCH_AT91SAM9263)
+
+#define AT91SAM9_MASTER_CLOCK 99959500
+#define CLOCK_TICK_RATE (AT91SAM9_MASTER_CLOCK/16)
+
#endif
#endif
/*
- * include/asm-arm/arch-at91rm9200/uncompress.h
+ * include/asm-arm/arch-at91/uncompress.h
*
* Copyright (C) 2003 SAN People
*
/*
- * include/asm-arm/arch-at91rm9200/vmalloc.h
+ * include/asm-arm/arch-at91/vmalloc.h
*
* Copyright (C) 2003 SAN People
*
+++ /dev/null
-/*
- * include/asm-arm/arch-at91rm9200/at91_pdc.h
- *
- * Copyright (C) 2005 Ivan Kokshaysky
- * Copyright (C) SAN People
- *
- * Peripheral Data Controller (PDC) registers.
- * Based on AT91RM9200 datasheet revision E.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91_PDC_H
-#define AT91_PDC_H
-
-#define AT91_PDC_RPR 0x100 /* Receive Pointer Register */
-#define AT91_PDC_RCR 0x104 /* Receive Counter Register */
-#define AT91_PDC_TPR 0x108 /* Transmit Pointer Register */
-#define AT91_PDC_TCR 0x10c /* Transmit Counter Register */
-#define AT91_PDC_RNPR 0x110 /* Receive Next Pointer Register */
-#define AT91_PDC_RNCR 0x114 /* Receive Next Counter Register */
-#define AT91_PDC_TNPR 0x118 /* Transmit Next Pointer Register */
-#define AT91_PDC_TNCR 0x11c /* Transmit Next Counter Register */
-
-#define AT91_PDC_PTCR 0x120 /* Transfer Control Register */
-#define AT91_PDC_RXTEN (1 << 0) /* Receiver Transfer Enable */
-#define AT91_PDC_RXTDIS (1 << 1) /* Receiver Transfer Disable */
-#define AT91_PDC_TXTEN (1 << 8) /* Transmitter Transfer Enable */
-#define AT91_PDC_TXTDIS (1 << 9) /* Transmitter Transfer Disable */
-
-#define AT91_PDC_PTSR 0x124 /* Transfer Status Register */
-
-#endif
+++ /dev/null
-/*
- * include/asm-arm/arch-at91rm9200/debug-macro.S
- *
- * Copyright (C) 2003-2005 SAN People
- *
- * Debugging macro include header
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-#include <asm/hardware.h>
-#include <asm/arch/at91_dbgu.h>
-
- .macro addruart,rx
- mrc p15, 0, \rx, c1, c0
- tst \rx, #1 @ MMU enabled?
- ldreq \rx, =AT91_BASE_SYS @ System peripherals (phys address)
- ldrne \rx, =AT91_VA_BASE_SYS @ System peripherals (virt address)
- .endm
-
- .macro senduart,rd,rx
- strb \rd, [\rx, #AT91_DBGU_THR] @ Write to Transmitter Holding Register
- .endm
-
- .macro waituart,rd,rx
-1001: ldr \rd, [\rx, #AT91_DBGU_SR] @ Read Status Register
- tst \rd, #AT91_DBGU_TXRDY @ DBGU_TXRDY = 1 when ready to transmit
- beq 1001b
- .endm
-
- .macro busyuart,rd,rx
-1001: ldr \rd, [\rx, #AT91_DBGU_SR] @ Read Status Register
- tst \rd, #AT91_DBGU_TXEMPTY @ DBGU_TXEMPTY = 1 when transmission complete
- beq 1001b
- .endm
-
+++ /dev/null
-/*
- * include/asm-arm/arch-at91rm9200/entry-macro.S
- *
- * Copyright (C) 2003-2005 SAN People
- *
- * Low-level IRQ helper macros for AT91RM9200 platforms
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <asm/hardware.h>
-#include <asm/arch/at91_aic.h>
-
- .macro disable_fiq
- .endm
-
- .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
- ldr \base, =(AT91_VA_BASE_SYS) @ base virtual address of SYS peripherals
- ldr \irqnr, [\base, #AT91_AIC_IVR] @ read IRQ vector register: de-asserts nIRQ to processor (and clears interrupt)
- ldr \irqstat, [\base, #AT91_AIC_ISR] @ read interrupt source number
- teq \irqstat, #0 @ ISR is 0 when no current interrupt, or spurious interrupt
- streq \tmp, [\base, #AT91_AIC_EOICR] @ not going to be handled further, then ACK it now.
- .endm
-
#define EP93XX_GPIO_BASE (EP93XX_APB_VIRT_BASE + 0x00040000)
#define EP93XX_GPIO_REG(x) (EP93XX_GPIO_BASE + (x))
+#define EP93XX_GPIO_F_INT_TYPE1 EP93XX_GPIO_REG(0x4c)
+#define EP93XX_GPIO_F_INT_TYPE2 EP93XX_GPIO_REG(0x50)
+#define EP93XX_GPIO_F_INT_ACK EP93XX_GPIO_REG(0x54)
+#define EP93XX_GPIO_F_INT_ENABLE EP93XX_GPIO_REG(0x58)
+#define EP93XX_GPIO_F_INT_STATUS EP93XX_GPIO_REG(0x5c)
#define EP93XX_GPIO_A_INT_TYPE1 EP93XX_GPIO_REG(0x90)
#define EP93XX_GPIO_A_INT_TYPE2 EP93XX_GPIO_REG(0x94)
#define EP93XX_GPIO_A_INT_ACK EP93XX_GPIO_REG(0x98)
#define IRQ_EP93XX_SAI 60
#define EP93XX_VIC2_VALID_IRQ_MASK 0x1fffffff
-#define IRQ_EP93XX_GPIO(x) (64 + (x))
+/*
+ * Map GPIO A0..A7 to irq 64..71, B0..B7 to 72..79, and
+ * F0..F7 to 80..87.
+ */
+#define IRQ_EP93XX_GPIO(x) (64 + (((x) + (((x) >> 2) & 8)) & 0x1f))
-#define NR_EP93XX_IRQS IRQ_EP93XX_GPIO(16)
+#define NR_EP93XX_IRQS (64 + 24)
#define EP93XX_BOARD_IRQ(x) (NR_EP93XX_IRQS + (x))
#define EP93XX_BOARD_IRQS 32
void ep93xx_init_irq(void);
void ep93xx_init_time(unsigned long);
void ep93xx_init_devices(void);
-void ep93xx_clock_init(void);
extern struct sys_timer ep93xx_timer;
struct ep93xx_eth_data
.endm
#define AITC_NIVECSR 0x40
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
- ldr \irqstat, =IO_ADDRESS(IMX_AITC_BASE)
+ ldr \base, =IO_ADDRESS(IMX_AITC_BASE)
@ Load offset & priority of the highest priority
@ interrupt pending.
- ldr \irqnr, [\irqstat, #AITC_NIVECSR]
+ ldr \irqstat, [\base, #AITC_NIVECSR]
@ Shift off the priority leaving the offset or
- @ "interrupt number"
- mov \irqnr, \irqnr, lsr #16
- ldr \irqstat, =1 @ dummy compare
- ldr \base, =0xFFFF // invalid interrupt
- cmp \irqnr, \base
- bne 1001f
- ldr \irqstat, =0
-1001:
- tst \irqstat, #1 @ to make the condition code = TRUE
+ @ "interrupt number", use arithmetic shift to
+ @ transform illegal source (0xffff) as -1
+ mov \irqnr, \irqstat, asr #16
+ adds \tmp, \irqnr, #1
.endm
-
#include <asm/hardware.h>
-#define IO_SPACE_LIMIT 0xffffffff
+extern void __iomem * __ioremap(unsigned long, size_t, unsigned long);
+extern void __iomem *__iop3xx_ioremap(unsigned long cookie, size_t size,
+ unsigned long flags);
+extern void __iop3xx_iounmap(void __iomem *addr);
-#define __io(p) ((void __iomem *)(p))
+#define IO_SPACE_LIMIT 0xffffffff
+#define __io(p) ((void __iomem *)IOP3XX_PCI_IO_PHYS_TO_VIRT(p))
#define __mem_pci(a) (a)
+#define __arch_ioremap(a, s, f) __iop3xx_ioremap(a, s, f)
+#define __arch_iounmap(a) __iop3xx_iounmap(a)
#endif
#include <asm/hardware.h>
+extern void __iomem * __ioremap(unsigned long, size_t, unsigned long);
+extern void __iomem *__iop3xx_ioremap(unsigned long cookie, size_t size,
+ unsigned long flags);
+extern void __iop3xx_iounmap(void __iomem *addr);
+
#define IO_SPACE_LIMIT 0xffffffff
-#define __io(p) ((void __iomem *)(p))
+#define __io(p) ((void __iomem *)IOP3XX_PCI_IO_PHYS_TO_VIRT(p))
#define __mem_pci(a) (a)
+#define __arch_ioremap(a, s, f) __iop3xx_ioremap(a, s, f)
+#define __arch_iounmap(a) __iop3xx_iounmap(a)
#endif
--- /dev/null
+/*
+ * include/asm-arm/arch-ixp4xx/avila.h
+ *
+ * Gateworks Avila platform specific definitions
+ *
+ * Author: Michael-Luke Jones <mlj28@cam.ac.uk>
+ *
+ * Based on ixdp425.h
+ * Author: Deepak Saxena <dsaxena@plexity.net>
+ *
+ * Copyright 2004 (c) MontaVista, Software, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H__
+#error "Do not include this directly, instead #include <asm/hardware.h>"
+#endif
+
+#define AVILA_SDA_PIN 7
+#define AVILA_SCL_PIN 6
+
+/*
+ * AVILA PCI IRQs
+ */
+#define AVILA_PCI_MAX_DEV 4
+#define LOFT_PCI_MAX_DEV 6
+#define AVILA_PCI_IRQ_LINES 4
+
+
+/* PCI controller GPIO to IRQ pin mappings */
+#define AVILA_PCI_INTA_PIN 11
+#define AVILA_PCI_INTB_PIN 10
+#define AVILA_PCI_INTC_PIN 9
+#define AVILA_PCI_INTD_PIN 8
+
+
/* Platform specific details */
#include "ixdp425.h"
+#include "avila.h"
#include "coyote.h"
#include "prpmc1100.h"
#include "nslu2.h"
#define IRQ_IXDP425_PCI_INTC IRQ_IXP4XX_GPIO9
#define IRQ_IXDP425_PCI_INTD IRQ_IXP4XX_GPIO8
+/*
+ * Gateworks Avila board IRQs
+ */
+#define IRQ_AVILA_PCI_INTA IRQ_IXP4XX_GPIO11
+#define IRQ_AVILA_PCI_INTB IRQ_IXP4XX_GPIO10
+#define IRQ_AVILA_PCI_INTC IRQ_IXP4XX_GPIO9
+#define IRQ_AVILA_PCI_INTD IRQ_IXP4XX_GPIO8
+
+
/*
* PrPMC1100 Board IRQs
*/
extern void ixp4xx_set_udc_info(struct pxa2xx_udc_mach_info *info);
+static inline int udc_gpio_to_irq(unsigned gpio)
+{
+ return 0;
+}
+
+static inline void udc_gpio_init_vbus(unsigned gpio)
+{
+}
+
+static inline void udc_gpio_init_pullup(unsigned gpio)
+{
+}
+
+static inline int udc_gpio_get(unsigned gpio)
+{
+ return 0;
+}
+
+static inline void udc_gpio_set(unsigned gpio, int is_on)
+{
+}
+
--- /dev/null
+/*
+ * include/asm-arm/arch-ns9xxx/board.h
+ *
+ * Copyright (C) 2006 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_BOARD_H
+#define __ASM_ARCH_BOARD_H
+
+#include <asm/mach-types.h>
+
+#define board_is_a9m9750dev() (machine_is_cc9p9360dev())
+
+#endif /* ifndef __ASM_ARCH_BOARD_H */
--- /dev/null
+/*
+ * include/asm-arm/arch-ns9xxx/clock.h
+ *
+ * Copyright (C) 2007 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_CLOCK_H
+#define __ASM_ARCH_CLOCK_H
+
+static inline u32 ns9xxx_systemclock(void)
+{
+ /*
+ * This should be a multiple of HZ * TIMERCLOCKSELECT (in time.c)
+ */
+ return 353894400;
+}
+
+static inline const u32 ns9xxx_cpuclock(void)
+{
+ return ns9xxx_systemclock() / 2;
+}
+
+static inline const u32 ns9xxx_ahbclock(void)
+{
+ return ns9xxx_systemclock() / 4;
+}
+
+static inline const u32 ns9xxx_bbusclock(void)
+{
+ return ns9xxx_systemclock() / 8;
+}
+
+#endif /* ifndef __ASM_ARCH_CLOCK_H */
--- /dev/null
+/*
+ * include/asm-arm/arch-ns9xxx/debug-macro.S
+ * Copyright (C) 2006 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#include <asm/hardware.h>
+
+#include <asm/arch-ns9xxx/regs-board-a9m9750dev.h>
+
+ .macro addruart,rx
+ mrc p15, 0, \rx, c1, c0
+ tst \rx, #1
+ ldreq \rx, =NS9XXX_CSxSTAT_PHYS(0)
+ ldrne \rx, =io_p2v(NS9XXX_CSxSTAT_PHYS(0))
+ .endm
+
+#define UART_SHIFT 2
+#include <asm/hardware/debug-8250.S>
--- /dev/null
+/*
+ * include/asm-arm/arch-ns9xxx/dma.h
+ *
+ * Copyright (C) 2006 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_DMA_H
+#define __ASM_ARCH_DMA_H
+
+#endif /* ifndef __ASM_ARCH_DMA_H */
--- /dev/null
+/*
+ * include/asm-arm/arch-ns9xxx/entry-macro.S
+ *
+ * Copyright (C) 2006 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#include <asm/hardware.h>
+#include <asm/arch-ns9xxx/regs-sys.h>
+
+ .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
+ ldr \base, =SYS_ISRADDR
+ ldr \irqstat, [\base, #(SYS_ISA - SYS_ISRADDR)]
+ cmp \irqstat, #0
+ ldrne \irqnr, [\base]
+ .endm
+
+ .macro disable_fiq
+ .endm
--- /dev/null
+/*
+ * include/asm-arm/arch-ns9xxx/hardware.h
+ *
+ * Copyright (C) 2006 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include <asm/memory.h>
+
+/*
+ * NetSilicon NS9xxx internal mapping:
+ *
+ * physical <--> virtual
+ * 0x90000000 - 0x906fffff <--> 0xf9000000 - 0xf96fffff
+ * 0xa0100000 - 0xa0afffff <--> 0xfa100000 - 0xfaafffff
+ */
+#define io_p2v(x) (0xf0000000 \
+ + (((x) & 0xf0000000) >> 4) \
+ + ((x) & 0x00ffffff))
+
+#define io_v2p(x) ((((x) & 0x0f000000) << 4) \
+ + ((x) & 0x00ffffff))
+
+#define __REGBIT(bit) ((u32)1 << (bit))
+#define __REGBITS(hbit, lbit) ((((u32)1 << ((hbit) - (lbit) + 1)) - 1) << (lbit))
+#define __REGVAL(mask, value) (((value) * ((mask) & (-(mask))) & (mask)))
+
+#ifndef __ASSEMBLY__
+
+# define __REG(x) (*((volatile u32 *)io_p2v((x))))
+# define __REG2(x, y) (*((volatile u32 *)io_p2v((x)) + (y)))
+
+# define __REGB(x) (*((volatile u8 *)io_p2v((x))))
+# define __REGB2(x) (*((volatile u8 *)io_p2v((x)) + (y)))
+
+# define REGSET(var, reg, field, value) \
+ ((var) = (((var) \
+ & ~(reg ## _ ## field & \
+ ~ reg ## _ ## field ## _ ## value)) \
+ | (reg ## _ ## field ## _ ## value)))
+
+# define REGSETIM(var, reg, field, value) \
+ ((var) = (((var) \
+ & ~(reg ## _ ## field & \
+ ~(__REGVAL(reg ## _ ## field, value)))) \
+ | (__REGVAL(reg ## _ ## field, value))))
+
+# define REGGET(reg, field) \
+ ((reg & (reg ## _ ## field)) / (field & (-field)))
+
+#else
+
+# define __REG(x) io_p2v(x)
+# define __REG2(x, y) io_p2v((x) + (y))
+
+# define __REGB(x) __REG((x))
+# define __REGB2(x, y) __REG2((x), (y))
+
+#endif
+
+#endif /* ifndef __ASM_ARCH_HARDWARE_H */
--- /dev/null
+/*
+ * include/asm-arm/arch-ns9xxx/io.h
+ *
+ * Copyright (C) 2006 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_IO_H
+#define __ASM_ARCH_IO_H
+
+#define IO_SPACE_LIMIT 0xffffffff /* XXX */
+
+#define __io(a) ((void __iomem *)(a))
+#define __mem_pci(a) (a)
+#define __mem_isa(a) (IO_BASE + (a))
+
+#endif /* ifndef __ASM_ARCH_IO_H */
--- /dev/null
+/*
+ * include/asm-arm/arch-ns9xxx/irqs.h
+ *
+ * Copyright (C) 2006 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H
+
+#define IRQ_WATCHDOG 0
+#define IRQ_AHBBUSERR 1
+#define IRQ_BBUSAGG 2
+/* irq 3 is reserved for NS9360 */
+#define IRQ_ETHRX 4
+#define IRQ_ETHTX 5
+#define IRQ_ETHPHY 6
+#define IRQ_LCD 7
+#define IRQ_SERBRX 8
+#define IRQ_SERBTX 9
+#define IRQ_SERARX 10
+#define IRQ_SERATX 11
+#define IRQ_SERCRX 12
+#define IRQ_SERCTX 13
+#define IRQ_I2C 14
+#define IRQ_BBUSDMA 15
+#define IRQ_TIMER0 16
+#define IRQ_TIMER1 17
+#define IRQ_TIMER2 18
+#define IRQ_TIMER3 19
+#define IRQ_TIMER4 20
+#define IRQ_TIMER5 21
+#define IRQ_TIMER6 22
+#define IRQ_TIMER7 23
+#define IRQ_RTC 24
+#define IRQ_USBHOST 25
+#define IRQ_USBDEVICE 26
+#define IRQ_IEEE1284 27
+#define IRQ_EXT0 28
+#define IRQ_EXT1 29
+#define IRQ_EXT2 30
+#define IRQ_EXT3 31
+
+#define BBUS_IRQ(irq) (32 + irq)
+
+#define IRQ_BBUS_DMA BBUS_IRQ(0)
+#define IRQ_BBUS_SERBRX BBUS_IRQ(2)
+#define IRQ_BBUS_SERBTX BBUS_IRQ(3)
+#define IRQ_BBUS_SERARX BBUS_IRQ(4)
+#define IRQ_BBUS_SERATX BBUS_IRQ(5)
+#define IRQ_BBUS_SERCRX BBUS_IRQ(6)
+#define IRQ_BBUS_SERCTX BBUS_IRQ(7)
+#define IRQ_BBUS_SERDRX BBUS_IRQ(8)
+#define IRQ_BBUS_SERDTX BBUS_IRQ(9)
+#define IRQ_BBUS_I2C BBUS_IRQ(10)
+#define IRQ_BBUS_1284 BBUS_IRQ(11)
+#define IRQ_BBUS_UTIL BBUS_IRQ(12)
+#define IRQ_BBUS_RTC BBUS_IRQ(13)
+#define IRQ_BBUS_USBHST BBUS_IRQ(14)
+#define IRQ_BBUS_USBDEV BBUS_IRQ(15)
+#define IRQ_BBUS_AHBDMA1 BBUS_IRQ(24)
+#define IRQ_BBUS_AHBDMA2 BBUS_IRQ(25)
+
+/*
+ * these Interrupts are specific for the a9m9750dev board.
+ * They are generated by an FPGA that interrupts the CPU on
+ * IRQ_EXT2
+ */
+#define FPGA_IRQ(irq) (64 + irq)
+
+#define IRQ_FPGA_UARTA FPGA_IRQ(0)
+#define IRQ_FPGA_UARTB FPGA_IRQ(1)
+#define IRQ_FPGA_UARTC FPGA_IRQ(2)
+#define IRQ_FPGA_UARTD FPGA_IRQ(3)
+#define IRQ_FPGA_TOUCH FPGA_IRQ(4)
+#define IRQ_FPGA_CF FPGA_IRQ(5)
+#define IRQ_FPGA_CAN0 FPGA_IRQ(6)
+#define IRQ_FPGA_CAN1 FPGA_IRQ(7)
+
+#define NR_IRQS 72
+
+#endif /* __ASM_ARCH_IRQS_H */
--- /dev/null
+/*
+ * include/asm-arm/arch-ns9xxx/memory.h
+ *
+ * Copyright (C) 2006 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+*/
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+/* x in [0..3] */
+#define NS9XXX_CSxSTAT_PHYS(x) UL(((x) + 4) << 28)
+
+#define NS9XXX_CS0STAT_LENGTH UL(0x1000)
+#define NS9XXX_CS1STAT_LENGTH UL(0x1000)
+#define NS9XXX_CS2STAT_LENGTH UL(0x1000)
+#define NS9XXX_CS3STAT_LENGTH UL(0x1000)
+
+#define PHYS_OFFSET UL(0x00000000)
+
+#define __virt_to_bus(x) __virt_to_phys(x)
+#define __bus_to_virt(x) __phys_to_virt(x)
+
+#endif
--- /dev/null
+/*
+ * include/asm-arm/arch-ns9xxx/processor.h
+ *
+ * Copyright (C) 2006 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_PROCESSOR_H
+#define __ASM_ARCH_PROCESSOR_H
+
+#include <asm/mach-types.h>
+
+#define processor_is_ns9360() (machine_is_cc9p9360dev())
+
+#endif /* ifndef __ASM_ARCH_PROCESSOR_H */
--- /dev/null
+/*
+ * include/asm-arm/arch-ns9xxx/regs-bbu.h
+ *
+ * Copyright (C) 2006 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_REGSBBU_H
+#define __ASM_ARCH_REGSBBU_H
+
+#include <asm/hardware.h>
+
+/* BBus Utility */
+
+/* GPIO Configuration Register */
+#define BBU_GC(x) __REG2(0x9060000c, (x))
+
+#endif /* ifndef __ASM_ARCH_REGSBBU_H */
--- /dev/null
+/*
+ * include/asm-arm/arch-ns9xxx/regs-board-a9m9750dev.h
+ *
+ * Copyright (C) 2006 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_REGSBOARDA9M9750_H
+#define __ASM_ARCH_REGSBOARDA9M9750_H
+
+#include <asm/hardware.h>
+
+#define FPGA_UARTA_BASE io_p2v(NS9XXX_CSxSTAT_PHYS(0))
+#define FPGA_UARTB_BASE io_p2v(NS9XXX_CSxSTAT_PHYS(0) + 0x08)
+#define FPGA_UARTC_BASE io_p2v(NS9XXX_CSxSTAT_PHYS(0) + 0x10)
+#define FPGA_UARTD_BASE io_p2v(NS9XXX_CSxSTAT_PHYS(0) + 0x18)
+
+#define FPGA_IER __REGB(NS9XXX_CSxSTAT_PHYS(0) + 0x50)
+#define FPGA_ISR __REGB(NS9XXX_CSxSTAT_PHYS(0) + 0x60)
+
+#endif /* ifndef __ASM_ARCH_REGSBOARDA9M9750_H */
--- /dev/null
+/*
+ * include/asm-arm/arch-ns9xxx/regs-mem.h
+ *
+ * Copyright (C) 2006 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_REGSMEM_H
+#define __ASM_ARCH_REGSMEM_H
+
+#include <asm/hardware.h>
+
+/* Memory Module */
+
+/* Control register */
+#define MEM_CTRL __REG(0xa0700000)
+
+/* Status register */
+#define MEM_STAT __REG(0xa0700004)
+
+/* Configuration register */
+#define MEM_CONF __REG(0xa0700008)
+
+/* Dynamic Memory Control register */
+#define MEM_DMCTRL __REG(0xa0700020)
+
+/* Dynamic Memory Refresh Timer */
+#define MEM_DMRT __REG(0xa0700024)
+
+/* Dynamic Memory Read Configuration register */
+#define MEM_DMRC __REG(0xa0700028)
+
+/* Dynamic Memory Precharge Command Period (tRP) */
+#define MEM_DMPCP __REG(0xa0700030)
+
+/* Dynamic Memory Active to Precharge Command Period (tRAS) */
+#define MEM_DMAPCP __REG(0xa0700034)
+
+/* Dynamic Memory Self-Refresh Exit Time (tSREX) */
+#define MEM_DMSRET __REG(0xa0700038)
+
+/* Dynamic Memory Last Data Out to Active Time (tAPR) */
+#define MEM_DMLDOAT __REG(0xa070003c)
+
+/* Dynamic Memory Data-in to Active Command Time (tDAL or TAPW) */
+#define MEM_DMDIACT __REG(0xa0700040)
+
+/* Dynamic Memory Write Recovery Time (tWR, tDPL, tRWL, tRDL) */
+#define MEM_DMWRT __REG(0xa0700044)
+
+/* Dynamic Memory Active to Active Command Period (tRC) */
+#define MEM_DMAACP __REG(0xa0700048)
+
+/* Dynamic Memory Auto Refresh Period, and Auto Refresh to Active Command Period (tRFC) */
+#define MEM_DMARP __REG(0xa070004c)
+
+/* Dynamic Memory Exit Self-Refresh to Active Command (tXSR) */
+#define MEM_DMESRAC __REG(0xa0700050)
+
+/* Dynamic Memory Active Bank A to Active B Time (tRRD) */
+#define MEM_DMABAABT __REG(0xa0700054)
+
+/* Dynamic Memory Load Mode register to Active Command Time (tMRD) */
+#define MEM_DMLMACT __REG(0xa0700058)
+
+/* Static Memory Extended Wait */
+#define MEM_SMEW __REG(0xa0700080)
+
+/* Dynamic Memory Configuration Register x */
+#define MEM_DMCONF(x) __REG2(0xa0700100, (x) << 3)
+
+/* Dynamic Memory RAS and CAS Delay x */
+#define MEM_DMRCD(x) __REG2(0xa0700104, (x) << 3)
+
+/* Static Memory Configuration Register x */
+#define MEM_SMC(x) __REG2(0xa0700200, (x) << 3)
+
+/* Static Memory Configuration Register x: Write protect */
+#define MEM_SMC_WSMC __REGBIT(20)
+#define MEM_SMC_WSMC_OFF __REGVAL(MEM_SMC_WSMC, 0)
+#define MEM_SMC_WSMC_ON __REGVAL(MEM_SMC_WSMC, 1)
+
+/* Static Memory Configuration Register x: Buffer enable */
+#define MEM_SMC_BSMC __REGBIT(19)
+#define MEM_SMC_BSMC_OFF __REGVAL(MEM_SMC_BSMC, 0)
+#define MEM_SMC_BSMC_ON __REGVAL(MEM_SMC_BSMC, 1)
+
+/* Static Memory Configuration Register x: Extended Wait */
+#define MEM_SMC_EW __REGBIT(8)
+#define MEM_SMC_EW_OFF __REGVAL(MEM_SMC_EW, 0)
+#define MEM_SMC_EW_ON __REGVAL(MEM_SMC_EW, 1)
+
+/* Static Memory Configuration Register x: Byte lane state */
+#define MEM_SMC_PB __REGBIT(7)
+#define MEM_SMC_PB_0 __REGVAL(MEM_SMC_PB, 0)
+#define MEM_SMC_PB_1 __REGVAL(MEM_SMC_PB, 1)
+
+/* Static Memory Configuration Register x: Chip select polarity */
+#define MEM_SMC_PC __REGBIT(6)
+#define MEM_SMC_PC_AL __REGVAL(MEM_SMC_PC, 0)
+#define MEM_SMC_PC_AH __REGVAL(MEM_SMC_PC, 1)
+
+/* static memory configuration register x: page mode*/
+#define MEM_SMC_PM __REGBIT(3)
+#define MEM_SMC_PM_DIS __REGVAL(MEM_SMC_PM, 0)
+#define MEM_SMC_PM_ASYNC __REGVAL(MEM_SMC_PM, 1)
+
+/* static memory configuration register x: Memory width */
+#define MEM_SMC_MW __REGBITS(1, 0)
+#define MEM_SMC_MW_8 __REGVAL(MEM_SMC_MW, 0)
+#define MEM_SMC_MW_16 __REGVAL(MEM_SMC_MW, 1)
+#define MEM_SMC_MW_32 __REGVAL(MEM_SMC_MW, 2)
+
+/* Static Memory Write Enable Delay x */
+#define MEM_SMWED(x) __REG2(0xa0700204, (x) << 3)
+
+/* Static Memory Output Enable Delay x */
+#define MEM_SMOED(x) __REG2(0xa0700208, (x) << 3)
+
+/* Static Memory Read Delay x */
+#define MEM_SMRD(x) __REG2(0xa070020c, (x) << 3)
+
+/* Static Memory Page Mode Read Delay 0 */
+#define MEM_SMPMRD(x) __REG2(0xa0700210, (x) << 3)
+
+/* Static Memory Write Delay */
+#define MEM_SMWD(x) __REG2(0xa0700214, (x) << 3)
+
+/* Static Memory Turn Round Delay x */
+#define MEM_SWT(x) __REG2(0xa0700218, (x) << 3)
+
+#endif /* ifndef __ASM_ARCH_REGSMEM_H */
--- /dev/null
+/*
+ * include/asm-arm/arch-ns9xxx/regs-sys.h
+ *
+ * Copyright (C) 2006 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_REGSSYS_H
+#define __ASM_ARCH_REGSSYS_H
+
+#include <asm/hardware.h>
+
+/* System Control Module */
+
+/* AHB Arbiter Gen Configuration */
+#define SYS_AHBAGENCONF __REG(0xa0900000)
+
+/* BRC */
+#define SYS_BRC(x) __REG2(0xa0900004, (x))
+
+/* Timer x Reload Count register */
+#define SYS_TRC(x) __REG2(0xa0900044, (x))
+
+/* Timer x Read register */
+#define SYS_TR(x) __REG2(0xa0900084, (x))
+
+/* Interrupt Vector Address Register Level x */
+#define SYS_IVA(x) __REG2(0xa09000c4, (x))
+
+/* Interrupt Configuration registers */
+#define SYS_IC(x) __REG2(0xa0900144, (x))
+
+/* ISRADDR */
+#define SYS_ISRADDR __REG(0xa0900164)
+
+/* Interrupt Status Active */
+#define SYS_ISA __REG(0xa0900168)
+
+/* Interrupt Status Raw */
+#define SYS_ISR __REG(0xa090016c)
+
+/* Timer Interrupt Status register */
+#define SYS_TIS __REG(0xa0900170)
+
+/* PLL Configuration register */
+#define SYS_PLL __REG(0xa0900188)
+
+/* PLL Configuration register: PLL SW change */
+#define SYS_PLL_SWC __REGBIT(15)
+#define SYS_PLL_SWC_NO __REGVAL(SYS_PLL_SWC, 0)
+#define SYS_PLL_SWC_YES __REGVAL(SYS_PLL_SWC, 1)
+
+/* Timer x Control register */
+#define SYS_TC(x) __REG2(0xa0900190, (x))
+
+/* Timer x Control register: Timer enable */
+#define SYS_TCx_TEN __REGBIT(15)
+#define SYS_TCx_TEN_DIS __REGVAL(SYS_TCx_TEN, 1)
+#define SYS_TCx_TEN_EN __REGVAL(SYS_TCx_TEN, 1)
+
+/* Timer x Control register: CPU debug mode */
+#define SYS_TCx_TDBG __REGBIT(10)
+#define SYS_TCx_TDBG_CONT __REGVAL(SYS_TCx_TDBG, 0)
+#define SYS_TCx_TDBG_STOP __REGVAL(SYS_TCx_TDBG, 1)
+
+/* Timer x Control register: Interrupt clear */
+#define SYS_TCx_INTC __REGBIT(9)
+#define SYS_TCx_INTC_UNSET __REGVAL(SYS_TCx_INTC, 0)
+#define SYS_TCx_INTC_SET __REGVAL(SYS_TCx_INTC, 1)
+
+/* Timer x Control register: Timer clock select */
+#define SYS_TCx_TLCS __REGBITS(8, 6)
+#define SYS_TCx_TLCS_CPU __REGVAL(SYS_TCx_TLCS, 0) /* CPU clock */
+#define SYS_TCx_TLCS_DIV2 __REGVAL(SYS_TCx_TLCS, 1) /* CPU clock / 2 */
+#define SYS_TCx_TLCS_DIV4 __REGVAL(SYS_TCx_TLCS, 2) /* CPU clock / 4 */
+#define SYS_TCx_TLCS_DIV8 __REGVAL(SYS_TCx_TLCS, 3) /* CPU clock / 8 */
+#define SYS_TCx_TLCS_DIV16 __REGVAL(SYS_TCx_TLCS, 4) /* CPU clock / 16 */
+#define SYS_TCx_TLCS_DIV32 __REGVAL(SYS_TCx_TLCS, 5) /* CPU clock / 32 */
+#define SYS_TCx_TLCS_DIV64 __REGVAL(SYS_TCx_TLCS, 6) /* CPU clock / 64 */
+#define SYS_TCx_TLCS_EXT __REGVAL(SYS_TCx_TLCS, 7)
+
+/* Timer x Control register: Timer mode */
+#define SYS_TCx_TM __REGBITS(5, 4)
+#define SYS_TCx_TM_IEE __REGVAL(SYS_TCx_TM, 0) /* Internal timer or external event */
+#define SYS_TCx_TM_ELL __REGVAL(SYS_TCx_TM, 1) /* External low-level, gated timer */
+#define SYS_TCx_TM_EHL __REGVAL(SYS_TCx_TM, 2) /* External high-level, gated timer */
+#define SYS_TCx_TM_CONCAT __REGVAL(SYS_TCx_TM, 3) /* Concatenate the lower timer. */
+
+/* Timer x Control register: Interrupt select */
+#define SYS_TCx_INTS __REGBIT(3)
+#define SYS_TCx_INTS_DIS __REGVAL(SYS_TCx_INTS, 0)
+#define SYS_TCx_INTS_EN __REGVAL(SYS_TCx_INTS, 1)
+
+/* Timer x Control register: Up/down select */
+#define SYS_TCx_UDS __REGBIT(2)
+#define SYS_TCx_UDS_UP __REGVAL(SYS_TCx_UDS, 0)
+#define SYS_TCx_UDS_DOWN __REGVAL(SYS_TCx_UDS, 1)
+
+/* Timer x Control register: 32- or 16-bit timer */
+#define SYS_TCx_TSZ __REGBIT(1)
+#define SYS_TCx_TSZ_16 __REGVAL(SYS_TCx_TSZ, 0)
+#define SYS_TCx_TSZ_32 __REGVAL(SYS_TCx_TSZ, 1)
+
+/* Timer x Control register: Reload enable */
+#define SYS_TCx_REN __REGBIT(0)
+#define SYS_TCx_REN_DIS __REGVAL(SYS_TCx_REN, 0)
+#define SYS_TCx_REN_EN __REGVAL(SYS_TCx_REN, 1)
+
+/* System Memory Chip Select x Dynamic Memory Base */
+#define SYS_SMCSDMB(x) __REG2(0xa09001d0, (x) << 1)
+
+/* System Memory Chip Select x Dynamic Memory Mask */
+#define SYS_SMCSDMM(x) __REG2(0xa09001d4, (x) << 1)
+
+/* System Memory Chip Select x Static Memory Base */
+#define SYS_SMCSSMB(x) __REG2(0xa09001f0, (x) << 1)
+
+/* System Memory Chip Select x Static Memory Base: Chip select x base */
+#define SYS_SMCSSMB_CSxB __REGBITS(31, 12)
+
+/* System Memory Chip Select x Static Memory Mask */
+#define SYS_SMCSSMM(x) __REG2(0xa09001f4, (x) << 1)
+
+/* System Memory Chip Select x Static Memory Mask: Chip select x mask */
+#define SYS_SMCSSMM_CSxM __REGBITS(31, 12)
+
+/* System Memory Chip Select x Static Memory Mask: Chip select x enable */
+#define SYS_SMCSSMM_CSEx __REGBIT(0)
+#define SYS_SMCSSMM_CSEx_DIS __REGVAL(SYS_SMCSSMM_CSEx, 0)
+#define SYS_SMCSSMM_CSEx_EN __REGVAL(SYS_SMCSSMM_CSEx, 1)
+
+/* General purpose, user-defined ID register */
+#define SYS_GENID __REG(0xa0900210)
+
+/* External Interrupt x Control register */
+#define SYS_EIC(x) __REG2(0xa0900214, (x))
+
+/* External Interrupt x Control register: Status */
+#define SYS_EIC_STS __REGBIT(3)
+
+/* External Interrupt x Control register: Clear */
+#define SYS_EIC_CLR __REGBIT(2)
+
+/* External Interrupt x Control register: Polarity */
+#define SYS_EIC_PLTY __REGBIT(1)
+#define SYS_EIC_PLTY_AH __REGVAL(SYS_EIC_PLTY, 0)
+#define SYS_EIC_PLTY_AL __REGVAL(SYS_EIC_PLTY, 1)
+
+/* External Interrupt x Control register: Level edge */
+#define SYS_EIC_LVEDG __REGBIT(0)
+#define SYS_EIC_LVEDG_LEVEL __REGVAL(SYS_EIC_LVEDG, 0)
+#define SYS_EIC_LVEDG_EDGE __REGVAL(SYS_EIC_LVEDG, 1)
+
+#endif /* ifndef __ASM_ARCH_REGSSYS_H */
--- /dev/null
+/*
+ * include/asm-arm/arch-ns9xxx/system.h
+ *
+ * Copyright (C) 2006 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+#include <asm/proc-fns.h>
+#include <asm/arch-ns9xxx/regs-sys.h>
+#include <asm/mach-types.h>
+
+static inline void arch_idle(void)
+{
+ cpu_do_idle();
+}
+
+static inline void arch_reset(char mode)
+{
+ u32 reg;
+
+ reg = SYS_PLL >> 16;
+ REGSET(reg, SYS_PLL, SWC, YES);
+ SYS_PLL = reg;
+
+ BUG();
+}
+
+#endif /* ifndef __ASM_ARCH_SYSTEM_H */
--- /dev/null
+/*
+ * include/asm-arm/arch-ns9xxx/timex.h
+ *
+ * Copyright (C) 2005-2006 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_TIMEX_H
+#define __ASM_ARCH_TIMEX_H
+
+/*
+ * value for CLOCK_TICK_RATE stolen from include/asm-arm/arch-s3c2410/timex.h.
+ * See there for an explanation.
+ */
+#define CLOCK_TICK_RATE 12000000
+
+#endif /* ifndef __ASM_ARCH_TIMEX_H */
--- /dev/null
+/*
+ * include/asm-arm/arch-ns9xxx/uncompress.h
+ *
+ * Copyright (C) 2006 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_UNCOMPRESS_H
+#define __ASM_ARCH_UNCOMPRESS_H
+
+static void putc(char c)
+{
+ volatile u8 *base = (volatile u8 *)0x40000000;
+ int t = 0x10000;
+
+ do {
+ if (base[5] & 0x20) {
+ base[0] = c;
+ break;
+ }
+ } while (--t);
+}
+
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
+
+static void flush(void)
+{
+ /* nothing */
+}
+
+#endif /* ifndef __ASM_ARCH_UNCOMPRESS_H */
--- /dev/null
+/*
+ * include/asm-arm/arch-ns9xxx/vmalloc.h
+ *
+ * Copyright (C) 2006 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_VMALLOC_H
+#define __ASM_ARCH_VMALLOC_H
+
+#define VMALLOC_END (0xf0000000)
+
+#endif /* ifndef __ASM_ARCH_VMALLOC_H */
* Serial Audio Controller
*/
-/* FIXME: This clash with SA1111 defines */
-#ifndef _ASM_ARCH_SA1111
-
#define SACR0 __REG(0x40400000) /* Global Control Register */
#define SACR1 __REG(0x40400004) /* Serial Audio I 2 S/MSB-Justified Control Register */
#define SASR0 __REG(0x4040000C) /* Serial Audio I 2 S/MSB-Justified Interface and FIFO Status Register */
#define SADIV __REG(0x40400060) /* Audio Clock Divider Register. */
#define SADR __REG(0x40400080) /* Serial Audio Data Register (TX and RX FIFO access Register). */
-#define SACR0_RFTH(x) (x << 12) /* Rx FIFO Interrupt or DMA Trigger Threshold */
-#define SACR0_TFTH(x) (x << 8) /* Tx FIFO Interrupt or DMA Trigger Threshold */
+#define SACR0_RFTH(x) ((x) << 12) /* Rx FIFO Interrupt or DMA Trigger Threshold */
+#define SACR0_TFTH(x) ((x) << 8) /* Tx FIFO Interrupt or DMA Trigger Threshold */
#define SACR0_STRF (1 << 5) /* FIFO Select for EFWR Special Function */
#define SACR0_EFWR (1 << 4) /* Enable EFWR Function */
#define SACR0_RST (1 << 3) /* FIFO, i2s Register Reset */
#define SAIMR_RFS (1 << 4) /* Enable Rx FIFO Service Interrupt */
#define SAIMR_TFS (1 << 3) /* Enable Tx FIFO Service Interrupt */
-#endif
-
/*
* AC97 Controller registers
*/
#define SSSR_PINT (1 << 18) /* Peripheral Trailing Byte Interrupt */
#define SSPSP_FSRT (1 << 25) /* Frame Sync Relative Timing */
-#define SSPSP_DMYSTOP(x) (x << 23) /* Dummy Stop */
-#define SSPSP_SFRMWDTH(x) (x << 16) /* Serial Frame Width */
-#define SSPSP_SFRMDLY(x) (x << 9) /* Serial Frame Delay */
-#define SSPSP_DMYSTRT(x) (x << 7) /* Dummy Start */
-#define SSPSP_STRTDLY(x) (x << 4) /* Start Delay */
+#define SSPSP_DMYSTOP(x) ((x) << 23) /* Dummy Stop */
+#define SSPSP_SFRMWDTH(x) ((x) << 16) /* Serial Frame Width */
+#define SSPSP_SFRMDLY(x) ((x) << 9) /* Serial Frame Delay */
+#define SSPSP_DMYSTRT(x) ((x) << 7) /* Dummy Start */
+#define SSPSP_STRTDLY(x) ((x) << 4) /* Start Delay */
#define SSPSP_ETDS (1 << 3) /* End of Transfer data State */
#define SSPSP_SFRMP (1 << 2) /* Serial Frame Polarity */
-#define SSPSP_SCMODE(x) (x << 0) /* Serial Bit Rate Clock Mode */
+#define SSPSP_SCMODE(x) ((x) << 0) /* Serial Bit Rate Clock Mode */
+#define SSACD_SCDB (1 << 3) /* SSPSYSCLK Divider Bypass */
+#define SSACD_ACPS(x) ((x) << 4) /* Audio clock PLL select */
+#define SSACD_ACDS(x) ((x) << 0) /* Audio clock divider select */
#define SSCR0_P1 __REG(0x41000000) /* SSP Port 1 Control Register 0 */
#define SSCR1_P1 __REG(0x41000004) /* SSP Port 1 Control Register 1 */
extern void pxa_set_udc_info(struct pxa2xx_udc_mach_info *info);
+static inline int udc_gpio_to_irq(unsigned gpio)
+{
+ return IRQ_GPIO(gpio & GPIO_MD_MASK_NR);
+}
+
+static inline void udc_gpio_init_vbus(unsigned gpio)
+{
+ pxa_gpio_mode((gpio & GPIO_MD_MASK_NR) | GPIO_IN);
+}
+
+static inline void udc_gpio_init_pullup(unsigned gpio)
+{
+ pxa_gpio_mode((gpio & GPIO_MD_MASK_NR) | GPIO_OUT | GPIO_DFLT_LOW);
+}
+
+static inline int udc_gpio_get(unsigned gpio)
+{
+ return (GPLR(gpio) & GPIO_bit(gpio)) != 0;
+}
+
+static inline void udc_gpio_set(unsigned gpio, int is_on)
+{
+ int mask = GPIO_bit(gpio);
+
+ if (is_on)
+ GPSR(gpio) = mask;
+ else
+ GPCR(gpio) = mask;
+}
+
#include <asm/arch/platform.h>
/* macro to get at IO space when running virtually */
-#define IO_ADDRESS(x) (((x) & 0x0fffffff) + (((x) >> 4) & 0x0f000000) + 0xf0000000)
+#define IO_ADDRESS(x) ((((x) & 0x0effffff) | (((x) >> 4) & 0x0f000000)) + 0xf0000000)
#define __io_address(n) __io(IO_ADDRESS(n))
#endif
#define IRQ_AACI (IRQ_GIC_START + INT_AACI)
#define IRQ_ETH (IRQ_GIC_START + INT_ETH)
#define IRQ_USB (IRQ_GIC_START + INT_USB)
+#define IRQ_PMU_CPU0 (IRQ_GIC_START + INT_PMU_CPU0)
+#define IRQ_PMU_CPU1 (IRQ_GIC_START + INT_PMU_CPU1)
+#define IRQ_PMU_CPU2 (IRQ_GIC_START + INT_PMU_CPU2)
+#define IRQ_PMU_CPU3 (IRQ_GIC_START + INT_PMU_CPU3)
+#define IRQ_PMU_SCU0 (IRQ_GIC_START + INT_PMU_SCU0)
+#define IRQ_PMU_SCU1 (IRQ_GIC_START + INT_PMU_SCU1)
+#define IRQ_PMU_SCU2 (IRQ_GIC_START + INT_PMU_SCU2)
+#define IRQ_PMU_SCU3 (IRQ_GIC_START + INT_PMU_SCU3)
+#define IRQ_PMU_SCU4 (IRQ_GIC_START + INT_PMU_SCU4)
+#define IRQ_PMU_SCU5 (IRQ_GIC_START + INT_PMU_SCU5)
+#define IRQ_PMU_SCU6 (IRQ_GIC_START + INT_PMU_SCU6)
+#define IRQ_PMU_SCU7 (IRQ_GIC_START + INT_PMU_SCU7)
+
+#define IRQ_EB_IRQ1 (IRQ_GIC_START + INT_EB_IRQ1)
+#define IRQ_EB_IRQ2 (IRQ_GIC_START + INT_EB_IRQ2)
#define IRQMASK_WDOGINT INTMASK_WDOGINT
#define IRQMASK_SOFTINT INTMASK_SOFTINT
#define IRQMASK_ETH INTMASK_ETH
#define IRQMASK_USB INTMASK_USB
-#define NR_IRQS (IRQ_GIC_START + 64)
+#define NR_IRQS (IRQ_GIC_START + 96)
#define REALVIEW_GIC_CPU_BASE 0x10040000 /* Generic interrupt controller CPU interface */
#define REALVIEW_GIC_DIST_BASE 0x10041000 /* Generic interrupt controller distributor */
#else
+#ifdef CONFIG_REALVIEW_MPCORE_REVB
#define REALVIEW_MPCORE_SCU_BASE 0x10100000 /* SCU registers */
#define REALVIEW_GIC_CPU_BASE 0x10100100 /* Generic interrupt controller CPU interface */
#define REALVIEW_TWD_BASE 0x10100700
#define REALVIEW_TWD_SIZE 0x00000100
#define REALVIEW_GIC_DIST_BASE 0x10101000 /* Generic interrupt controller distributor */
+#define REALVIEW_MPCORE_L220_BASE 0x10102000 /* L220 registers */
+#define REALVIEW_MPCORE_SYS_PLD_CTRL1 0xD8 /* Register offset for MPCore sysctl */
+#else
+#define REALVIEW_MPCORE_SCU_BASE 0x1F000000 /* SCU registers */
+#define REALVIEW_GIC_CPU_BASE 0x1F000100 /* Generic interrupt controller CPU interface */
+#define REALVIEW_TWD_BASE 0x1F000700
+#define REALVIEW_TWD_SIZE 0x00000100
+#define REALVIEW_GIC_DIST_BASE 0x1F001000 /* Generic interrupt controller distributor */
+#define REALVIEW_MPCORE_L220_BASE 0x1F002000 /* L220 registers */
+#define REALVIEW_MPCORE_SYS_PLD_CTRL1 0x74 /* Register offset for MPCore sysctl */
+#endif
+#define REALVIEW_GIC1_CPU_BASE 0x10040000 /* Generic interrupt controller CPU interface */
+#define REALVIEW_GIC1_DIST_BASE 0x10041000 /* Generic interrupt controller distributor */
#endif
#define REALVIEW_SMC_BASE 0x10080000 /* SMC */
/* Reserved 0x10090000 - 0x100EFFFF */
#define INT_USB 29 /* USB controller */
#define INT_TSPENINT 30 /* Touchscreen pen */
#define INT_TSKPADINT 31 /* Touchscreen keypad */
+
#else
+
+#define MAX_GIC_NR 2
+
#define INT_AACI 0
#define INT_TIMERINT0_1 1
#define INT_TIMERINT2_3 2
--- /dev/null
+#ifndef __ASMARM_ARCH_SCU_H
+#define __ASMARM_ARCH_SCU_H
+
+#include <asm/arch/platform.h>
+
+#define SCU_BASE REALVIEW_MPCORE_SCU_BASE
+
+#endif
DMACH_UART0_SRC2, /* s3c2412 second uart sources */
DMACH_UART1_SRC2,
DMACH_UART2_SRC2,
+ DMACH_UART3, /* s3c2443 has extra uart */
+ DMACH_UART3_SRC2,
DMACH_MAX, /* the end entry */
};
#define DMACH_LOW_LEVEL (1<<28) /* use this to specifiy hardware ch no */
/* we have 4 dma channels */
-#define S3C2410_DMA_CHANNELS (4)
+#ifndef CONFIG_CPU_S3C2443
+#define S3C2410_DMA_CHANNELS (4)
+#else
+#define S3C2410_DMA_CHANNELS (6)
+#endif
/* types */
#define S3C2410_DMA_DCDST (0x1C)
#define S3C2410_DMA_DMASKTRIG (0x20)
#define S3C2412_DMA_DMAREQSEL (0x24)
+#define S3C2443_DMA_DMAREQSEL (0x24)
#define S3C2410_DISRCC_INC (1<<0)
#define S3C2410_DISRCC_APB (1<<1)
#define S3C2412_DMAREQSEL_UART2_1 S3C2412_DMAREQSEL_SRC(24)
#endif
+
+#define S3C2443_DMAREQSEL_SRC(x) ((x)<<1)
+
+#define S3C2443_DMAREQSEL_HW (1)
+
+#define S3C2443_DMAREQSEL_SPI0TX S3C2443_DMAREQSEL_SRC(0)
+#define S3C2443_DMAREQSEL_SPI0RX S3C2443_DMAREQSEL_SRC(1)
+#define S3C2443_DMAREQSEL_SPI1TX S3C2443_DMAREQSEL_SRC(2)
+#define S3C2443_DMAREQSEL_SPI1RX S3C2443_DMAREQSEL_SRC(3)
+#define S3C2443_DMAREQSEL_I2STX S3C2443_DMAREQSEL_SRC(4)
+#define S3C2443_DMAREQSEL_I2SRX S3C2443_DMAREQSEL_SRC(5)
+#define S3C2443_DMAREQSEL_TIMER S3C2443_DMAREQSEL_SRC(9)
+#define S3C2443_DMAREQSEL_SDI S3C2443_DMAREQSEL_SRC(10)
+#define S3C2443_DMAREQSEL_XDREQ0 S3C2443_DMAREQSEL_SRC(17)
+#define S3C2443_DMAREQSEL_XDREQ1 S3C2443_DMAREQSEL_SRC(18)
+#define S3C2443_DMAREQSEL_UART0_0 S3C2443_DMAREQSEL_SRC(19)
+#define S3C2443_DMAREQSEL_UART0_1 S3C2443_DMAREQSEL_SRC(20)
+#define S3C2443_DMAREQSEL_UART1_0 S3C2443_DMAREQSEL_SRC(21)
+#define S3C2443_DMAREQSEL_UART1_1 S3C2443_DMAREQSEL_SRC(22)
+#define S3C2443_DMAREQSEL_UART2_0 S3C2443_DMAREQSEL_SRC(23)
+#define S3C2443_DMAREQSEL_UART2_1 S3C2443_DMAREQSEL_SRC(24)
+#define S3C2443_DMAREQSEL_UART3_0 S3C2443_DMAREQSEL_SRC(25)
+#define S3C2443_DMAREQSEL_UART3_1 S3C2443_DMAREQSEL_SRC(26)
+#define S3C2443_DMAREQSEL_PCMOUT S3C2443_DMAREQSEL_SRC(27)
+#define S3C2443_DMAREQSEL_PCMIN S3C2443_DMAREQSEL_SRC(28)
+#define S3C2443_DMAREQSEL_MICIN S3C2443_DMAREQSEL_SRC(29)
+
#endif /* __ASM_ARCH_DMA_H */
#define IRQ_EINT4t7 S3C2410_IRQ(4) /* 20 */
#define IRQ_EINT8t23 S3C2410_IRQ(5)
#define IRQ_RESERVED6 S3C2410_IRQ(6) /* for s3c2410 */
-#define IRQ_CAM S3C2410_IRQ(6) /* for s3c2440 */
+#define IRQ_CAM S3C2410_IRQ(6) /* for s3c2440,s3c2443 */
#define IRQ_BATT_FLT S3C2410_IRQ(7)
#define IRQ_TICK S3C2410_IRQ(8) /* 24 */
-#define IRQ_WDT S3C2410_IRQ(9)
+#define IRQ_WDT S3C2410_IRQ(9) /* WDT/AC97 for s3c2443 */
#define IRQ_TIMER0 S3C2410_IRQ(10)
#define IRQ_TIMER1 S3C2410_IRQ(11)
#define IRQ_TIMER2 S3C2410_IRQ(12)
#define IRQ_TIMER4 S3C2410_IRQ(14)
#define IRQ_UART2 S3C2410_IRQ(15)
#define IRQ_LCD S3C2410_IRQ(16) /* 32 */
-#define IRQ_DMA0 S3C2410_IRQ(17)
+#define IRQ_DMA0 S3C2410_IRQ(17) /* IRQ_DMA for s3c2443 */
#define IRQ_DMA1 S3C2410_IRQ(18)
#define IRQ_DMA2 S3C2410_IRQ(19)
#define IRQ_DMA3 S3C2410_IRQ(20)
* these need to be ordered in number of appearance in the
* SUBSRC mask register
*/
-#define IRQ_S3CUART_RX0 S3C2410_IRQ(54) /* 70 */
-#define IRQ_S3CUART_TX0 S3C2410_IRQ(55) /* 71 */
-#define IRQ_S3CUART_ERR0 S3C2410_IRQ(56)
-#define IRQ_S3CUART_RX1 S3C2410_IRQ(57)
-#define IRQ_S3CUART_TX1 S3C2410_IRQ(58)
-#define IRQ_S3CUART_ERR1 S3C2410_IRQ(59)
+#define S3C2410_IRQSUB(x) S3C2410_IRQ((x)+54)
-#define IRQ_S3CUART_RX2 S3C2410_IRQ(60)
-#define IRQ_S3CUART_TX2 S3C2410_IRQ(61)
-#define IRQ_S3CUART_ERR2 S3C2410_IRQ(62)
+#define IRQ_S3CUART_RX0 S3C2410_IRQSUB(0) /* 70 */
+#define IRQ_S3CUART_TX0 S3C2410_IRQSUB(1)
+#define IRQ_S3CUART_ERR0 S3C2410_IRQSUB(2)
-#define IRQ_TC S3C2410_IRQ(63)
-#define IRQ_ADC S3C2410_IRQ(64)
+#define IRQ_S3CUART_RX1 S3C2410_IRQSUB(3) /* 73 */
+#define IRQ_S3CUART_TX1 S3C2410_IRQSUB(4)
+#define IRQ_S3CUART_ERR1 S3C2410_IRQSUB(5)
-/* extra irqs for s3c2440 */
+#define IRQ_S3CUART_RX2 S3C2410_IRQSUB(6) /* 76 */
+#define IRQ_S3CUART_TX2 S3C2410_IRQSUB(7)
+#define IRQ_S3CUART_ERR2 S3C2410_IRQSUB(8)
-#define IRQ_S3C2440_CAM_C S3C2410_IRQ(65)
-#define IRQ_S3C2440_CAM_P S3C2410_IRQ(66)
-#define IRQ_S3C2440_WDT S3C2410_IRQ(67)
-#define IRQ_S3C2440_AC97 S3C2410_IRQ(68)
+#define IRQ_TC S3C2410_IRQSUB(9)
+#define IRQ_ADC S3C2410_IRQSUB(10)
-#define NR_IRQS (IRQ_S3C2440_AC97+1)
+/* extra irqs for s3c2440 */
+#define IRQ_S3C2440_CAM_C S3C2410_IRQSUB(11) /* S3C2443 too */
+#define IRQ_S3C2440_CAM_P S3C2410_IRQSUB(12) /* S3C2443 too */
+#define IRQ_S3C2440_WDT S3C2410_IRQSUB(13)
+#define IRQ_S3C2440_AC97 S3C2410_IRQSUB(14)
+
+/* irqs for s3c2443 */
+
+#define IRQ_S3C2443_DMA S3C2410_IRQ(17) /* IRQ_DMA1 */
+#define IRQ_S3C2443_UART3 S3C2410_IRQ(18) /* IRQ_DMA2 */
+#define IRQ_S3C2443_CFCON S3C2410_IRQ(19) /* IRQ_DMA3 */
+#define IRQ_S3C2443_SDI1 S3C2410_IRQ(20) /* IRQ_SDI */
+#define IRQ_S3C2443_NAND S3C2410_IRQ(24) /* reserved */
+
+#define IRQ_S3C2443_LCD1 S3C2410_IRQSUB(14)
+#define IRQ_S3C2443_LCD2 S3C2410_IRQSUB(15)
+#define IRQ_S3C2443_LCD3 S3C2410_IRQSUB(16)
+#define IRQ_S3C2443_LCD4 S3C2410_IRQSUB(17)
+
+#define IRQ_S3C2443_DMA0 S3C2410_IRQSUB(18)
+#define IRQ_S3C2443_DMA1 S3C2410_IRQSUB(19)
+#define IRQ_S3C2443_DMA2 S3C2410_IRQSUB(20)
+#define IRQ_S3C2443_DMA3 S3C2410_IRQSUB(21)
+#define IRQ_S3C2443_DMA4 S3C2410_IRQSUB(22)
+#define IRQ_S3C2443_DMA5 S3C2410_IRQSUB(23)
+
+/* UART3 */
+#define IRQ_S3C2443_RX3 S3C2410_IRQSUB(24)
+#define IRQ_S3C2443_TX3 S3C2410_IRQSUB(25)
+#define IRQ_S3C2443_ERR3 S3C2410_IRQSUB(26)
+
+#define IRQ_S3C2443_WDT S3C2410_IRQSUB(27)
+#define IRQ_S3C2443_AC97 S3C2410_IRQSUB(28)
+
+#ifdef CONFIG_CPU_S3C2443
+#define NR_IRQS (IRQ_S3C2443_AC97+1)
+#else
+#define NR_IRQS (IRQ_S3C2440_AC97+1)
+#endif
#endif /* __ASM_ARCH_IRQ_H */
#define S3C2410_ADCTSC_XP_SEN (1<<4)
#define S3C2410_ADCTSC_PULL_UP_DISABLE (1<<3)
#define S3C2410_ADCTSC_AUTO_PST (1<<2)
-#define S3C2410_ADCTSC_XY_PST (0x3<<0)
+#define S3C2410_ADCTSC_XY_PST(x) (((x)&0x3)<<0)
/* ADCDAT0 Bits */
#define S3C2410_ADCDAT0_UPDOWN (1<<15)
#define S3C2400_GPBDAT S3C2410_GPIOREG(0x0C)
#define S3C2400_GPBUP S3C2410_GPIOREG(0x10)
-/* no i/o pin in port b can have value 3! */
+/* no i/o pin in port b can have value 3 (unless it is a s3c2443) ! */
#define S3C2410_GPB0 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 0)
#define S3C2410_GPB0_INP (0x00 << 0)
#define S3C2410_GPB5_INP (0x00 << 10)
#define S3C2410_GPB5_OUTP (0x01 << 10)
#define S3C2410_GPB5_nXBACK (0x02 << 10)
+#define S3C2443_GPB5_XBACK (0x03 << 10)
#define S3C2400_GPB5_DATA21 (0x02 << 10)
#define S3C2400_GPB5_nCTS1 (0x03 << 10)
#define S3C2410_GPB6_INP (0x00 << 12)
#define S3C2410_GPB6_OUTP (0x01 << 12)
#define S3C2410_GPB6_nXBREQ (0x02 << 12)
+#define S3C2443_GPB6_XBREQ (0x03 << 12)
#define S3C2400_GPB6_DATA22 (0x02 << 12)
#define S3C2400_GPB6_nRTS1 (0x03 << 12)
#define S3C2410_GPB7_INP (0x00 << 14)
#define S3C2410_GPB7_OUTP (0x01 << 14)
#define S3C2410_GPB7_nXDACK1 (0x02 << 14)
+#define S3C2443_GPB7_XDACK1 (0x03 << 14)
#define S3C2400_GPB7_DATA23 (0x02 << 14)
#define S3C2410_GPB8 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 8)
#define S3C2410_GPB9_INP (0x00 << 18)
#define S3C2410_GPB9_OUTP (0x01 << 18)
#define S3C2410_GPB9_nXDACK0 (0x02 << 18)
+#define S3C2443_GPB9_XDACK0 (0x03 << 18)
#define S3C2400_GPB9_DATA25 (0x02 << 18)
#define S3C2400_GPB9_I2SSDI (0x03 << 18)
#define S3C2410_GPB10_INP (0x00 << 20)
#define S3C2410_GPB10_OUTP (0x01 << 20)
#define S3C2410_GPB10_nXDRE0 (0x02 << 20)
+#define S3C2443_GPB10_XDREQ0 (0x03 << 20)
#define S3C2400_GPB10_DATA26 (0x02 << 20)
#define S3C2400_GPB10_nSS (0x03 << 20)
#define S3C2410_GPE0_INP (0x00 << 0)
#define S3C2410_GPE0_OUTP (0x01 << 0)
#define S3C2410_GPE0_I2SLRCK (0x02 << 0)
+#define S3C2443_GPE0_AC_nRESET (0x03 << 0)
#define S3C2400_GPE0_EINT0 (0x02 << 0)
#define S3C2410_GPE0_MASK (0x03 << 0)
#define S3C2410_GPE1_INP (0x00 << 2)
#define S3C2410_GPE1_OUTP (0x01 << 2)
#define S3C2410_GPE1_I2SSCLK (0x02 << 2)
+#define S3C2443_GPE1_AC_SYNC (0x03 << 2)
#define S3C2400_GPE1_EINT1 (0x02 << 2)
#define S3C2400_GPE1_nSS (0x03 << 2)
#define S3C2410_GPE1_MASK (0x03 << 2)
#define S3C2410_GPE2_INP (0x00 << 4)
#define S3C2410_GPE2_OUTP (0x01 << 4)
#define S3C2410_GPE2_CDCLK (0x02 << 4)
+#define S3C2443_GPE2_AC_BITCLK (0x03 << 4)
#define S3C2400_GPE2_EINT2 (0x02 << 4)
#define S3C2400_GPE2_I2SSDI (0x03 << 4)
#define S3C2410_GPE3_INP (0x00 << 6)
#define S3C2410_GPE3_OUTP (0x01 << 6)
#define S3C2410_GPE3_I2SSDI (0x02 << 6)
+#define S3C2443_GPE3_AC_SDI (0x03 << 6)
#define S3C2400_GPE3_EINT3 (0x02 << 6)
#define S3C2400_GPE3_nCTS1 (0x03 << 6)
#define S3C2410_GPE3_nSS0 (0x03 << 6)
#define S3C2410_GPE4_INP (0x00 << 8)
#define S3C2410_GPE4_OUTP (0x01 << 8)
#define S3C2410_GPE4_I2SSDO (0x02 << 8)
+#define S3C2443_GPE4_AC_SDO (0x03 << 8)
#define S3C2400_GPE4_EINT4 (0x02 << 8)
#define S3C2400_GPE4_nRTS1 (0x03 << 8)
#define S3C2410_GPE4_I2SSDI (0x03 << 8)
#define S3C2410_GPE5_INP (0x00 << 10)
#define S3C2410_GPE5_OUTP (0x01 << 10)
#define S3C2410_GPE5_SDCLK (0x02 << 10)
+#define S3C2443_GPE5_SD1_CLK (0x02 << 10)
#define S3C2400_GPE5_EINT5 (0x02 << 10)
#define S3C2400_GPE5_TCLK1 (0x03 << 10)
#define S3C2410_GPE6_INP (0x00 << 12)
#define S3C2410_GPE6_OUTP (0x01 << 12)
#define S3C2410_GPE6_SDCMD (0x02 << 12)
+#define S3C2443_GPE6_SD1_CMD (0x02 << 12)
+#define S3C2443_GPE6_AC_BITCLK (0x03 << 12)
#define S3C2400_GPE6_EINT6 (0x02 << 12)
#define S3C2410_GPE7 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 7)
#define S3C2410_GPE7_INP (0x00 << 14)
#define S3C2410_GPE7_OUTP (0x01 << 14)
#define S3C2410_GPE7_SDDAT0 (0x02 << 14)
+#define S3C2443_GPE5_SD1_DAT0 (0x02 << 14)
+#define S3C2443_GPE7_AC_SDI (0x03 << 14)
#define S3C2400_GPE7_EINT7 (0x02 << 14)
#define S3C2410_GPE8 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 8)
#define S3C2410_GPE8_INP (0x00 << 16)
#define S3C2410_GPE8_OUTP (0x01 << 16)
#define S3C2410_GPE8_SDDAT1 (0x02 << 16)
+#define S3C2443_GPE8_SD1_DAT1 (0x02 << 16)
+#define S3C2443_GPE8_AC_SDO (0x03 << 16)
#define S3C2400_GPE8_nXDACK0 (0x02 << 16)
#define S3C2410_GPE9 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 9)
#define S3C2410_GPE9_INP (0x00 << 18)
#define S3C2410_GPE9_OUTP (0x01 << 18)
#define S3C2410_GPE9_SDDAT2 (0x02 << 18)
+#define S3C2443_GPE9_SD1_DAT2 (0x02 << 18)
+#define S3C2443_GPE9_AC_SYNC (0x03 << 18)
#define S3C2400_GPE9_nXDACK1 (0x02 << 18)
#define S3C2400_GPE9_nXBACK (0x03 << 18)
#define S3C2410_GPE10_INP (0x00 << 20)
#define S3C2410_GPE10_OUTP (0x01 << 20)
#define S3C2410_GPE10_SDDAT3 (0x02 << 20)
+#define S3C2443_GPE10_SD1_DAT3 (0x02 << 20)
+#define S3C2443_GPE10_AC_nRESET (0x03 << 20)
#define S3C2400_GPE10_nXDREQ0 (0x02 << 20)
#define S3C2410_GPE11 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 11)
#define S3C2400_GPG4_MMCCLK (0x02 << 8)
#define S3C2400_GPG4_I2SSDI (0x03 << 8)
#define S3C2410_GPG4_LCDPWREN (0x03 << 8)
+#define S3C2443_GPG4_LCDPWRDN (0x03 << 8)
#define S3C2410_GPG5 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 5)
#define S3C2410_GPG5_INP (0x00 << 10)
#define S3C2410_GPG5_EINT13 (0x02 << 10)
#define S3C2400_GPG5_MMCCMD (0x02 << 10)
#define S3C2400_GPG5_IICSDA (0x03 << 10)
-#define S3C2410_GPG5_SPIMISO1 (0x03 << 10)
+#define S3C2410_GPG5_SPIMISO1 (0x03 << 10) /* not s3c2443 */
#define S3C2410_GPG6 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 6)
#define S3C2410_GPG6_INP (0x00 << 12)
#define S3C2410_GPG11_OUTP (0x01 << 22)
#define S3C2410_GPG11_EINT19 (0x02 << 22)
#define S3C2410_GPG11_TCLK1 (0x03 << 22)
+#define S3C2443_GPG11_CF_nIREQ (0x03 << 22)
#define S3C2410_GPG12 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 12)
#define S3C2410_GPG12_INP (0x00 << 24)
#define S3C2410_GPG12_EINT20 (0x02 << 24)
#define S3C2410_GPG12_XMON (0x03 << 24)
#define S3C2442_GPG12_nSPICS0 (0x03 << 24)
+#define S3C2443_GPG12_nINPACK (0x03 << 24)
#define S3C2410_GPG13 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 13)
#define S3C2410_GPG13_INP (0x00 << 26)
#define S3C2410_GPG13_OUTP (0x01 << 26)
#define S3C2410_GPG13_EINT21 (0x02 << 26)
#define S3C2410_GPG13_nXPON (0x03 << 26)
+#define S3C2443_GPG13_CF_nREG (0x03 << 26)
#define S3C2410_GPG14 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 14)
#define S3C2410_GPG14_INP (0x00 << 28)
#define S3C2410_GPG14_OUTP (0x01 << 28)
#define S3C2410_GPG14_EINT22 (0x02 << 28)
#define S3C2410_GPG14_YMON (0x03 << 28)
+#define S3C2443_GPG14_CF_RESET (0x03 << 28)
#define S3C2410_GPG15 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 15)
#define S3C2410_GPG15_INP (0x00 << 30)
#define S3C2410_GPG15_OUTP (0x01 << 30)
#define S3C2410_GPG15_EINT23 (0x02 << 30)
#define S3C2410_GPG15_nYPON (0x03 << 30)
-
+#define S3C2443_GPG15_CF_PWR (0x03 << 30)
#define S3C2410_GPG_PUPDIS(x) (1<<(x))
--- /dev/null
+/* linux/include/asm-arm/arch-s3c2410/regs-clock.h
+ *
+ * Copyright (c) 2007 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S3C2443 clock register definitions
+*/
+
+#ifndef __ASM_ARM_REGS_S3C2443_CLOCK
+#define __ASM_ARM_REGS_S3C2443_CLOCK
+
+#define S3C2443_CLKREG(x) ((x) + S3C24XX_VA_CLKPWR)
+
+#define S3C2443_PLLCON_MDIVSHIFT 16
+#define S3C2443_PLLCON_PDIVSHIFT 8
+#define S3C2443_PLLCON_SDIVSHIFT 0
+#define S3C2443_PLLCON_MDIVMASK ((1<<(1+(23-16)))-1)
+#define S3C2443_PLLCON_PDIVMASK ((1<<(1+(9-8)))-1)
+#define S3C2443_PLLCON_SDIVMASK (3)
+
+#define S3C2443_MPLLCON S3C2443_CLKREG(0x10)
+#define S3C2443_EPLLCON S3C2443_CLKREG(0x18)
+#define S3C2443_CLKSRC S3C2443_CLKREG(0x20)
+#define S3C2443_CLKDIV0 S3C2443_CLKREG(0x24)
+#define S3C2443_CLKDIV1 S3C2443_CLKREG(0x28)
+#define S3C2443_HCLKCON S3C2443_CLKREG(0x30)
+#define S3C2443_PCLKCON S3C2443_CLKREG(0x34)
+#define S3C2443_SCLKCON S3C2443_CLKREG(0x38)
+#define S3C2443_PWRMODE S3C2443_CLKREG(0x40)
+#define S3C2443_SWRST S3C2443_CLKREG(0x44)
+#define S3C2443_BUSPRI0 S3C2443_CLKREG(0x50)
+#define S3C2443_SYSID S3C2443_CLKREG(0x5C)
+#define S3C2443_PWRCFG S3C2443_CLKREG(0x60)
+#define S3C2443_RSTCON S3C2443_CLKREG(0x64)
+
+#define S3C2443_SWRST_RESET (0x533c2443)
+
+#define S3C2443_PLLCON_OFF (1<<24)
+
+#define S3C2443_CLKSRC_I2S_EXT (1<<14)
+#define S3C2443_CLKSRC_I2S_EPLLDIV (0<<14)
+#define S3C2443_CLKSRC_I2S_EPLLREF (2<<14)
+#define S3C2443_CLKSRC_I2S_EPLLREF3 (3<<14)
+#define S3C2443_CLKSRC_I2S_MASK (3<<14)
+
+#define S3C2443_CLKSRC_EPLLREF_XTAL (2<<8)
+#define S3C2443_CLKSRC_EPLLREF_EXTCLK (3<<8)
+#define S3C2443_CLKSRC_EPLLREF_MPLLREF (0<<8)
+#define S3C2443_CLKSRC_EPLLREF_MPLLREF2 (1<<8)
+#define S3C2443_CLKSRC_EPLLREF_MASK (3<<8)
+
+#define S3C2443_CLKSRC_ESYSCLK_EPLL (1<<6)
+#define S3C2443_CLKSRC_MSYSCLK_MPLL (1<<4)
+#define S3C2443_CLKSRC_EXTCLK_DIV (1<<3)
+
+#define S3C2443_CLKDIV0_DVS (1<<13)
+#define S3C2443_CLKDIV0_HALF_HCLK (1<<3)
+#define S3C2443_CLKDIV0_HALF_PCLK (1<<2)
+
+#define S3C2443_CLKDIV0_HCLKDIV_MASK (3<<0)
+
+#define S3C2443_CLKDIV0_EXTDIV_MASK (3<<6)
+#define S3C2443_CLKDIV0_EXTDIV_SHIFT (6)
+
+#define S3C2443_CLKDIV0_PREDIV_MASK (3<<4)
+#define S3C2443_CLKDIV0_PREDIV_SHIFT (4)
+
+#define S3C2443_CLKDIV0_ARMDIV_MASK (15<<9)
+#define S3C2443_CLKDIV0_ARMDIV_SHIFT (9)
+#define S3C2443_CLKDIV0_ARMDIV_1 (0<<9)
+#define S3C2443_CLKDIV0_ARMDIV_2 (8<<9)
+#define S3C2443_CLKDIV0_ARMDIV_3 (2<<9)
+#define S3C2443_CLKDIV0_ARMDIV_4 (9<<9)
+#define S3C2443_CLKDIV0_ARMDIV_6 (10<<9)
+#define S3C2443_CLKDIV0_ARMDIV_8 (11<<9)
+#define S3C2443_CLKDIV0_ARMDIV_12 (13<<9)
+#define S3C2443_CLKDIV0_ARMDIV_16 (15<<9)
+
+/* S3C2443_CLKDIV1 */
+
+#define S3C2443_CLKDIV1_CAMDIV_MASK (15<<26)
+#define S3C2443_CLKDIV1_CAMDIV_SHIFT (26)
+
+#define S3C2443_CLKDIV1_HSSPIDIV_MASK (3<<24)
+#define S3C2443_CLKDIV1_HSSPIDIV_SHIFT (24)
+
+#define S3C2443_CLKDIV1_DISPDIV_MASK (0xff<<16)
+#define S3C2443_CLKDIV1_DISPDIV_SHIFT (16)
+
+#define S3C2443_CLKDIV1_I2SDIV_MASK (15<<12)
+#define S3C2443_CLKDIV1_I2SDIV_SHIFT (12)
+
+#define S3C2443_CLKDIV1_UARTDIV_MASK (15<<8)
+#define S3C2443_CLKDIV1_UARTDIV_SHIFT (8)
+
+#define S3C2443_CLKDIV1_HSMMCDIV_MASK (3<<6)
+#define S3C2443_CLKDIV1_HSMMCDIV_SHIFT (6)
+
+#define S3C2443_CLKDIV1_USBHOSTDIV_MASK (3<<4)
+#define S3C2443_CLKDIV1_USBHOSTDIV_SHIFT (4)
+
+#define S3C2443_CLKCON_NAND
+
+#define S3C2443_HCLKCON_DMA0 (1<<0)
+#define S3C2443_HCLKCON_DMA1 (1<<1)
+#define S3C2443_HCLKCON_DMA2 (1<<2)
+#define S3C2443_HCLKCON_DMA3 (1<<3)
+#define S3C2443_HCLKCON_DMA4 (1<<4)
+#define S3C2443_HCLKCON_DMA5 (1<<5)
+#define S3C2443_HCLKCON_CAMIF (1<<8)
+#define S3C2443_HCLKCON_DISP (1<<9)
+#define S3C2443_HCLKCON_LCDC (1<<10)
+#define S3C2443_HCLKCON_USBH (1<<11)
+#define S3C2443_HCLKCON_USBD (1<<12)
+#define S3C2443_HCLKCON_HSMMC (1<<16)
+#define S3C2443_HCLKCON_CFC (1<<17)
+#define S3C2443_HCLKCON_SSMC (1<<18)
+#define S3C2443_HCLKCON_DRAMC (1<<19)
+
+#define S3C2443_PCLKCON_UART0 (1<<0)
+#define S3C2443_PCLKCON_UART1 (1<<1)
+#define S3C2443_PCLKCON_UART2 (1<<2)
+#define S3C2443_PCLKCON_UART3 (1<<3)
+#define S3C2443_PCLKCON_IIC (1<<4)
+#define S3C2443_PCLKCON_SDI (1<<5)
+#define S3C2443_PCLKCON_ADC (1<<7)
+#define S3C2443_PCLKCON_IIS (1<<9)
+#define S3C2443_PCLKCON_PWMT (1<<10)
+#define S3C2443_PCLKCON_WDT (1<<11)
+#define S3C2443_PCLKCON_RTC (1<<12)
+#define S3C2443_PCLKCON_GPIO (1<<13)
+#define S3C2443_PCLKCON_SPI0 (1<<14)
+#define S3C2443_PCLKCON_SPI1 (1<<15)
+
+#define S3C2443_SCLKCON_DDRCLK (1<<16)
+#define S3C2443_SCLKCON_SSMCCLK (1<<15)
+#define S3C2443_SCLKCON_HSSPICLK (1<<14)
+#define S3C2443_SCLKCON_HSMMCCLK_EXT (1<<13)
+#define S3C2443_SCLKCON_HSMMCCLK_EPLL (1<<12)
+#define S3C2443_SCLKCON_CAMCLK (1<<11)
+#define S3C2443_SCLKCON_DISPCLK (1<<10)
+#define S3C2443_SCLKCON_I2SCLK (1<<9)
+#define S3C2443_SCLKCON_UARTCLK (1<<8)
+#define S3C2443_SCLKCON_USBHOST (1<<1)
+
+#include <asm/div64.h>
+
+static inline unsigned int
+s3c2443_get_mpll(unsigned int pllval, unsigned int baseclk)
+{
+ unsigned int mdiv, pdiv, sdiv;
+ uint64_t fvco;
+
+ mdiv = pllval >> S3C2443_PLLCON_MDIVSHIFT;
+ pdiv = pllval >> S3C2443_PLLCON_PDIVSHIFT;
+ sdiv = pllval >> S3C2443_PLLCON_SDIVSHIFT;
+
+ mdiv &= S3C2443_PLLCON_MDIVMASK;
+ pdiv &= S3C2443_PLLCON_PDIVMASK;
+ sdiv &= S3C2443_PLLCON_SDIVMASK;
+
+ fvco = (uint64_t)baseclk * (2 * (mdiv + 8));
+ do_div(fvco, pdiv << sdiv);
+
+ return (unsigned int)fvco;
+}
+
+static inline unsigned int
+s3c2443_get_epll(unsigned int pllval, unsigned int baseclk)
+{
+ unsigned int mdiv, pdiv, sdiv;
+ uint64_t fvco;
+
+ mdiv = pllval >> S3C2443_PLLCON_MDIVSHIFT;
+ pdiv = pllval >> S3C2443_PLLCON_PDIVSHIFT;
+ sdiv = pllval >> S3C2443_PLLCON_SDIVSHIFT;
+
+ mdiv &= S3C2443_PLLCON_MDIVMASK;
+ pdiv &= S3C2443_PLLCON_PDIVMASK;
+ sdiv &= S3C2443_PLLCON_SDIVMASK;
+
+ fvco = (uint64_t)baseclk * (mdiv + 8);
+ do_div(fvco, (pdiv + 2) << sdiv);
+
+ return (unsigned int)fvco;
+}
+
+#endif /* __ASM_ARM_REGS_S3C2443_CLOCK */
+
#define S3C24XX_VA_UART0 (S3C24XX_VA_UART)
#define S3C24XX_VA_UART1 (S3C24XX_VA_UART + 0x4000 )
#define S3C24XX_VA_UART2 (S3C24XX_VA_UART + 0x8000 )
+#define S3C24XX_VA_UART3 (S3C24XX_VA_UART + 0xC000 )
#define S3C2410_PA_UART0 (S3C24XX_PA_UART)
#define S3C2410_PA_UART1 (S3C24XX_PA_UART + 0x4000 )
#define S3C2410_PA_UART2 (S3C24XX_PA_UART + 0x8000 )
+#define S3C2443_PA_UART3 (S3C24XX_PA_UART + 0xC000 )
#define S3C2410_URXH (0x24)
#define S3C2410_UTXH (0x20)
#define S3C2440_UCON_UCLK (1<<10)
#define S3C2440_UCON_PCLK2 (2<<10)
#define S3C2440_UCON_FCLK (3<<10)
+#define S3C2443_UCON_EPLL (3<<10)
+
#define S3C2440_UCON2_FCLK_EN (1<<15)
#define S3C2440_UCON0_DIVMASK (15 << 12)
#define S3C2440_UCON1_DIVMASK (15 << 12)
#define S3C2410_UCON_TXIRQMODE (1<<2)
#define S3C2410_UCON_RXIRQMODE (1<<0)
#define S3C2410_UCON_RXFIFO_TOI (1<<7)
+#define S3C2443_UCON_RXERR_IRQEN (1<<6)
+#define S3C2443_UCON_LOOPBACK (1<<5)
#define S3C2410_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
S3C2410_UCON_RXILEVEL | \
#define S3C2410_UMCOM_AFC (1<<4)
#define S3C2410_UMCOM_RTS_LOW (1<<0)
-#define S3C2412_UMCON_AFC_63 (0<<5)
+#define S3C2412_UMCON_AFC_63 (0<<5) /* same as s3c2443 */
#define S3C2412_UMCON_AFC_56 (1<<5)
#define S3C2412_UMCON_AFC_48 (2<<5)
#define S3C2412_UMCON_AFC_40 (3<<5)
#define S3C2410_UFSTAT_RXMASK (15<<0)
#define S3C2410_UFSTAT_RXSHIFT (0)
+/* UFSTAT S3C2443 same as S3C2440 */
#define S3C2440_UFSTAT_TXFULL (1<<14)
#define S3C2440_UFSTAT_RXFULL (1<<6)
#define S3C2440_UFSTAT_TXSHIFT (8)
#define S3C2410_UERSTAT_OVERRUN (1<<0)
#define S3C2410_UERSTAT_FRAME (1<<2)
#define S3C2410_UERSTAT_BREAK (1<<3)
+#define S3C2443_UERSTAT_PARITY (1<<1)
+
#define S3C2410_UERSTAT_ANY (S3C2410_UERSTAT_OVERRUN | \
S3C2410_UERSTAT_FRAME | \
S3C2410_UERSTAT_BREAK)
#define S3C2410_UMSTAT_CTS (1<<0)
#define S3C2410_UMSTAT_DeltaCTS (1<<2)
+#define S3C2443_DIVSLOT (0x2C)
+
#ifndef __ASSEMBLY__
/* struct s3c24xx_uart_clksrc
--- /dev/null
+/* linux/include/asm-arm/arch-s3c2410/reset.h
+ *
+ * Copyright (c) 2007 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S3C2410 CPU reset controls
+*/
+
+#ifndef __ASM_ARCH_RESET_H
+#define __ASM_ARCH_RESET_H __FILE__
+
+/* This allows the over-ride of the default reset code
+*/
+
+extern void (*s3c24xx_reset_hook)(void);
+
+#endif /* __ASM_ARCH_RESET_H */
#include <asm/arch/map.h>
#include <asm/arch/idle.h>
+#include <asm/arch/reset.h>
#include <asm/arch/regs-watchdog.h>
#include <asm/arch/regs-clock.h>
void (*s3c24xx_idle)(void);
+void (*s3c24xx_reset_hook)(void);
void s3c24xx_default_idle(void)
{
- void __iomem *reg = S3C2410_CLKCON;
unsigned long tmp;
int i;
/* Warning: going into idle state upsets jtag scanning */
- __raw_writel(__raw_readl(reg) | (1<<2), reg);
+ __raw_writel(__raw_readl(S3C2410_CLKCON) | S3C2410_CLKCON_IDLE,
+ S3C2410_CLKCON);
/* the samsung port seems to do a loop and then unset idle.. */
for (i = 0; i < 50; i++) {
- tmp += __raw_readl(reg); /* ensure loop not optimised out */
+ tmp += __raw_readl(S3C2410_CLKCON); /* ensure loop not optimised out */
}
/* this bit is not cleared on re-start... */
- __raw_writel(__raw_readl(reg) & ~(1<<2), reg);
+ __raw_writel(__raw_readl(S3C2410_CLKCON) & ~S3C2410_CLKCON_IDLE,
+ S3C2410_CLKCON);
}
static void arch_idle(void)
s3c24xx_default_idle();
}
-
static void
arch_reset(char mode)
{
cpu_reset(0);
}
+ if (s3c24xx_reset_hook)
+ s3c24xx_reset_hook();
+
printk("arch_reset: attempting watchdog reset\n");
__raw_writel(0, S3C2410_WTCON); /* disable watchdog, to be safe */
--- /dev/null
+/* linux/include/asm/arch-s3c2410/udc.h
+ *
+ * Copyright (c) 2005 Arnaud Patard <arnaud.patard@rtp-net.org>
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *
+ * Changelog:
+ * 14-Mar-2005 RTP Created file
+ * 02-Aug-2005 RTP File rename
+ * 07-Sep-2005 BJD Minor cleanups, changed cmd to enum
+ * 18-Jan-2007 HMW Add per-platform vbus_draw function
+*/
+
+#ifndef __ASM_ARM_ARCH_UDC_H
+#define __ASM_ARM_ARCH_UDC_H
+
+enum s3c2410_udc_cmd_e {
+ S3C2410_UDC_P_ENABLE = 1, /* Pull-up enable */
+ S3C2410_UDC_P_DISABLE = 2, /* Pull-up disable */
+ S3C2410_UDC_P_RESET = 3, /* UDC reset, in case of */
+};
+
+struct s3c2410_udc_mach_info {
+ void (*udc_command)(enum s3c2410_udc_cmd_e);
+ void (*vbus_draw)(unsigned int ma);
+ unsigned int vbus_pin;
+ unsigned char vbus_pin_inverted;
+};
+
+extern void __init s3c24xx_udc_set_platdata(struct s3c2410_udc_mach_info *);
+
+#endif /* __ASM_ARM_ARCH_UDC_H */
void (*coherent_user_range)(unsigned long, unsigned long);
void (*flush_kern_dcache_page)(void *);
- void (*dma_inv_range)(unsigned long, unsigned long);
- void (*dma_clean_range)(unsigned long, unsigned long);
- void (*dma_flush_range)(unsigned long, unsigned long);
+ void (*dma_inv_range)(const void *, const void *);
+ void (*dma_clean_range)(const void *, const void *);
+ void (*dma_flush_range)(const void *, const void *);
+};
+
+struct outer_cache_fns {
+ void (*inv_range)(unsigned long, unsigned long);
+ void (*clean_range)(unsigned long, unsigned long);
+ void (*flush_range)(unsigned long, unsigned long);
};
/*
#define dmac_clean_range __glue(_CACHE,_dma_clean_range)
#define dmac_flush_range __glue(_CACHE,_dma_flush_range)
-extern void dmac_inv_range(unsigned long, unsigned long);
-extern void dmac_clean_range(unsigned long, unsigned long);
-extern void dmac_flush_range(unsigned long, unsigned long);
+extern void dmac_inv_range(const void *, const void *);
+extern void dmac_clean_range(const void *, const void *);
+extern void dmac_flush_range(const void *, const void *);
+
+#endif
+
+#ifdef CONFIG_OUTER_CACHE
+
+extern struct outer_cache_fns outer_cache;
+
+static inline void outer_inv_range(unsigned long start, unsigned long end)
+{
+ if (outer_cache.inv_range)
+ outer_cache.inv_range(start, end);
+}
+static inline void outer_clean_range(unsigned long start, unsigned long end)
+{
+ if (outer_cache.clean_range)
+ outer_cache.clean_range(start, end);
+}
+static inline void outer_flush_range(unsigned long start, unsigned long end)
+{
+ if (outer_cache.flush_range)
+ outer_cache.flush_range(start, end);
+}
+
+#else
+
+static inline void outer_inv_range(unsigned long start, unsigned long end)
+{ }
+static inline void outer_clean_range(unsigned long start, unsigned long end)
+{ }
+static inline void outer_flush_range(unsigned long start, unsigned long end)
+{ }
#endif
__wsum
csum_partial_copy_from_user(const void __user *src, void *dst, int len, __wsum sum, int *err_ptr);
+/*
+ * Fold a partial checksum without adding pseudo headers
+ */
+static inline __sum16 csum_fold(__wsum sum)
+{
+ __asm__(
+ "add %0, %1, %1, ror #16 @ csum_fold"
+ : "=r" (sum)
+ : "r" (sum)
+ : "cc");
+ return (__force __sum16)(~(__force u32)sum >> 16);
+}
+
/*
* This is a version of ip_compute_csum() optimized for IP headers,
* which always checksum on 4 octet boundaries.
static inline __sum16
ip_fast_csum(const void *iph, unsigned int ihl)
{
- unsigned int sum, tmp1;
+ unsigned int tmp1;
+ __wsum sum;
__asm__ __volatile__(
"ldr %0, [%1], #4 @ ip_fast_csum \n\
subne %2, %2, #1 @ without destroying \n\
bne 1b @ the carry flag \n\
adcs %0, %0, %3 \n\
- adc %0, %0, #0 \n\
- adds %0, %0, %0, lsl #16 \n\
- addcs %0, %0, #0x10000 \n\
- mvn %0, %0 \n\
- mov %0, %0, lsr #16"
+ adc %0, %0, #0"
: "=r" (sum), "=r" (iph), "=r" (ihl), "=r" (tmp1)
: "1" (iph), "2" (ihl)
: "cc", "memory");
- return (__force __sum16)sum;
-}
-
-/*
- * Fold a partial checksum without adding pseudo headers
- */
-static inline __sum16 csum_fold(__wsum sum)
-{
- __asm__(
- "adds %0, %1, %1, lsl #16 @ csum_fold \n\
- addcs %0, %0, #0x10000"
- : "=r" (sum)
- : "r" (sum)
- : "cc");
- return (__force __sum16)(~(__force u32)sum >> 16);
+ return csum_fold(sum);
}
static inline __wsum
csum_tcpudp_magic(__be32 saddr, __be32 daddr, unsigned short len,
unsigned short proto, __wsum sum)
{
- __asm__(
- "adds %0, %1, %2 @ csum_tcpudp_magic \n\
- adcs %0, %0, %3 \n"
-#ifdef __ARMEB__
- "adcs %0, %0, %4 \n"
-#else
- "adcs %0, %0, %4, lsl #8 \n"
-#endif
- "adcs %0, %0, %5 \n\
- adc %0, %0, #0 \n\
- adds %0, %0, %0, lsl #16 \n\
- addcs %0, %0, #0x10000 \n\
- mvn %0, %0"
- : "=&r"(sum)
- : "r" (sum), "r" (daddr), "r" (saddr), "r" (len), "Ir" (htons(proto))
- : "cc");
- return (__force __sum16)((__force u32)sum >> 16);
+ return csum_fold(csum_tcpudp_nofold(saddr, daddr, len, proto, sum));
}
*
* This file is released under the GPLv2
*/
-#include <asm-generic/device.h>
+#ifndef ASMARM_DEVICE_H
+#define ASMARM_DEVICE_H
+struct dev_archdata {
+#ifdef CONFIG_DMABOUNCE
+ struct dmabounce_device_info *dmabounce;
+#endif
+};
+
+#endif
* platforms with CONFIG_DMABOUNCE.
* Use the driver DMA support - see dma-mapping.h (dma_sync_*)
*/
-extern void consistent_sync(void *kaddr, size_t size, int rw);
+extern void consistent_sync(const void *kaddr, size_t size, int rw);
/*
* Return whether the given device DMA address mask can be supported
return dma_addr == ~0;
}
+/*
+ * Dummy noncoherent implementation. We don't provide a dma_cache_sync
+ * function so drivers using this API are highlighted with build warnings.
+ */
+static inline void *
+dma_alloc_noncoherent(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp)
+{
+ return NULL;
+}
+
+static inline void
+dma_free_noncoherent(struct device *dev, size_t size, void *cpu_addr,
+ dma_addr_t handle)
+{
+}
+
/**
* dma_alloc_coherent - allocate consistent memory for DMA
* @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
__asm__ __volatile__( \
"mcr p15, 0, %0, c3, c0 @ set domain" \
: : "r" (x)); \
+ isb(); \
} while (0)
#define modify_domain(dom,type) \
#ifndef ASMARM_HARDWARE_ARM_SCU_H
#define ASMARM_HARDWARE_ARM_SCU_H
+#include <asm/arch/scu.h>
+
/*
* SCU registers
*/
--- /dev/null
+/*
+ * include/asm-arm/hardware/cache-l2x0.h
+ *
+ * Copyright (C) 2007 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __ASM_ARM_HARDWARE_L2X0_H
+#define __ASM_ARM_HARDWARE_L2X0_H
+
+#define L2X0_CACHE_ID 0x000
+#define L2X0_CACHE_TYPE 0x004
+#define L2X0_CTRL 0x100
+#define L2X0_AUX_CTRL 0x104
+#define L2X0_EVENT_CNT_CTRL 0x200
+#define L2X0_EVENT_CNT1_CFG 0x204
+#define L2X0_EVENT_CNT0_CFG 0x208
+#define L2X0_EVENT_CNT1_VAL 0x20C
+#define L2X0_EVENT_CNT0_VAL 0x210
+#define L2X0_INTR_MASK 0x214
+#define L2X0_MASKED_INTR_STAT 0x218
+#define L2X0_RAW_INTR_STAT 0x21C
+#define L2X0_INTR_CLEAR 0x220
+#define L2X0_CACHE_SYNC 0x730
+#define L2X0_INV_LINE_PA 0x770
+#define L2X0_INV_WAY 0x77C
+#define L2X0_CLEAN_LINE_PA 0x7B0
+#define L2X0_CLEAN_LINE_IDX 0x7B8
+#define L2X0_CLEAN_WAY 0x7BC
+#define L2X0_CLEAN_INV_LINE_PA 0x7F0
+#define L2X0_CLEAN_INV_LINE_IDX 0x7F8
+#define L2X0_CLEAN_INV_WAY 0x7FC
+#define L2X0_LOCKDOWN_WAY_D 0x900
+#define L2X0_LOCKDOWN_WAY_I 0x904
+#define L2X0_TEST_OPERATION 0xF00
+#define L2X0_LINE_DATA 0xF10
+#define L2X0_LINE_TAG 0xF30
+#define L2X0_DEBUG_CTRL 0xF40
+
+#ifndef __ASSEMBLY__
+extern void __init l2x0_init(void __iomem *base, __u32 aux_val, __u32 aux_mask);
+#endif
+
+#endif
#define GIC_DIST_SOFTINT 0xf00
#ifndef __ASSEMBLY__
-void gic_dist_init(void __iomem *base);
-void gic_cpu_init(void __iomem *base);
+void gic_dist_init(unsigned int gic_nr, void __iomem *base, unsigned int irq_start);
+void gic_cpu_init(unsigned int gic_nr, void __iomem *base);
+void gic_cascade_irq(unsigned int gic_nr, unsigned int irq);
void gic_raise_softirq(cpumask_t cpumask, unsigned int irq);
#endif
#define IOP3XX_PERIPHERAL_PHYS_BASE 0xffffe000
#define IOP3XX_PERIPHERAL_VIRT_BASE 0xfeffe000
#define IOP3XX_PERIPHERAL_SIZE 0x00002000
+#define IOP3XX_PERIPHERAL_UPPER_PA (IOP3XX_PERIPHERAL_PHYS_BASE +\
+ IOP3XX_PERIPHERAL_SIZE - 1)
+#define IOP3XX_PERIPHERAL_UPPER_VA (IOP3XX_PERIPHERAL_VIRT_BASE +\
+ IOP3XX_PERIPHERAL_SIZE - 1)
+#define IOP3XX_PMMR_PHYS_TO_VIRT(addr) (u32) ((u32) addr -\
+ (IOP3XX_PERIPHERAL_PHYS_BASE\
+ - IOP3XX_PERIPHERAL_VIRT_BASE))
#define IOP3XX_REG_ADDR(reg) (IOP3XX_PERIPHERAL_VIRT_BASE + (reg))
/* Address Translation Unit */
#define IOP3XX_PCI_LOWER_IO_PA 0x90000000
#define IOP3XX_PCI_LOWER_IO_VA 0xfe000000
#define IOP3XX_PCI_LOWER_IO_BA (*IOP3XX_OIOWTVR)
+#define IOP3XX_PCI_UPPER_IO_PA (IOP3XX_PCI_LOWER_IO_PA +\
+ IOP3XX_PCI_IO_WINDOW_SIZE - 1)
+#define IOP3XX_PCI_UPPER_IO_VA (IOP3XX_PCI_LOWER_IO_VA +\
+ IOP3XX_PCI_IO_WINDOW_SIZE - 1)
+#define IOP3XX_PCI_IO_PHYS_TO_VIRT(addr) (((u32) addr -\
+ IOP3XX_PCI_LOWER_IO_PA) +\
+ IOP3XX_PCI_LOWER_IO_VA)
#ifndef __ASSEMBLY__
void iop3xx_map_io(void);
void iop3xx_init_time(unsigned long);
unsigned long iop3xx_gettimeoffset(void);
+void iop_init_cp6_handler(void);
extern struct platform_device iop3xx_i2c0_device;
extern struct platform_device iop3xx_i2c1_device;
#define _SA1111(x) ((x) + sa1111->resource.start)
#endif
+#define sa1111_writel(val,addr) __raw_writel(val, addr)
+#define sa1111_readl(addr) __raw_readl(addr)
+
/*
* 26 bits of the SA-1110 address bus are available to the SA-1111.
* Use these when feeding target addresses to the DMA engines.
#define SA1111_SAC_DMA_MIN_XFER (0x800)
-/*
- * SA1111 register definitions.
- */
-#define __CCREG(x) __REGP(SA1111_VBASE + (x))
-
-#define sa1111_writel(val,addr) __raw_writel(val, addr)
-#define sa1111_readl(addr) __raw_readl(addr)
-
/*
* System Bus Interface (SBI)
*
* SADR Serial Audio Data Register (16 x 32-bit)
*/
-#define _SACR0 _SA1111( 0x0600 )
-#define _SACR1 _SA1111( 0x0604 )
-#define _SACR2 _SA1111( 0x0608 )
-#define _SASR0 _SA1111( 0x060c )
-#define _SASR1 _SA1111( 0x0610 )
-#define _SASCR _SA1111( 0x0618 )
-#define _L3_CAR _SA1111( 0x061c )
-#define _L3_CDR _SA1111( 0x0620 )
-#define _ACCAR _SA1111( 0x0624 )
-#define _ACCDR _SA1111( 0x0628 )
-#define _ACSAR _SA1111( 0x062c )
-#define _ACSDR _SA1111( 0x0630 )
-#define _SADTCS _SA1111( 0x0634 )
-#define _SADTSA _SA1111( 0x0638 )
-#define _SADTCA _SA1111( 0x063c )
-#define _SADTSB _SA1111( 0x0640 )
-#define _SADTCB _SA1111( 0x0644 )
-#define _SADRCS _SA1111( 0x0648 )
-#define _SADRSA _SA1111( 0x064c )
-#define _SADRCA _SA1111( 0x0650 )
-#define _SADRSB _SA1111( 0x0654 )
-#define _SADRCB _SA1111( 0x0658 )
-#define _SAITR _SA1111( 0x065c )
-#define _SADR _SA1111( 0x0680 )
-
-#define SACR0 __CCREG(0x0600)
-#define SACR1 __CCREG(0x0604)
-#define SACR2 __CCREG(0x0608)
-#define SASR0 __CCREG(0x060c)
-#define SASR1 __CCREG(0x0610)
-#define SASCR __CCREG(0x0618)
-#define L3_CAR __CCREG(0x061c)
-#define L3_CDR __CCREG(0x0620)
-#define ACCAR __CCREG(0x0624)
-#define ACCDR __CCREG(0x0628)
-#define ACSAR __CCREG(0x062c)
-#define ACSDR __CCREG(0x0630)
-#define SADTCS __CCREG(0x0634)
-#define SADTSA __CCREG(0x0638)
-#define SADTCA __CCREG(0x063c)
-#define SADTSB __CCREG(0x0640)
-#define SADTCB __CCREG(0x0644)
-#define SADRCS __CCREG(0x0648)
-#define SADRSA __CCREG(0x064c)
-#define SADRCA __CCREG(0x0650)
-#define SADRSB __CCREG(0x0654)
-#define SADRCB __CCREG(0x0658)
-#define SAITR __CCREG(0x065c)
-#define SADR __CCREG(0x0680)
+#define SA1111_SERAUDIO 0x0600
+
+/*
+ * These are offsets from the above base.
+ */
+#define SA1111_SACR0 0x00
+#define SA1111_SACR1 0x04
+#define SA1111_SACR2 0x08
+#define SA1111_SASR0 0x0c
+#define SA1111_SASR1 0x10
+#define SA1111_SASCR 0x18
+#define SA1111_L3_CAR 0x1c
+#define SA1111_L3_CDR 0x20
+#define SA1111_ACCAR 0x24
+#define SA1111_ACCDR 0x28
+#define SA1111_ACSAR 0x2c
+#define SA1111_ACSDR 0x30
+#define SA1111_SADTCS 0x34
+#define SA1111_SADTSA 0x38
+#define SA1111_SADTCA 0x3c
+#define SA1111_SADTSB 0x40
+#define SA1111_SADTCB 0x44
+#define SA1111_SADRCS 0x48
+#define SA1111_SADRSA 0x4c
+#define SA1111_SADRCA 0x50
+#define SA1111_SADRSB 0x54
+#define SA1111_SADRCB 0x58
+#define SA1111_SAITR 0x5c
+#define SA1111_SADR 0x80
+
+#ifndef CONFIG_ARCH_PXA
#define SACR0_ENB (1<<0)
#define SACR0_BCKD (1<<2)
#define SAITR_RDBDA (1<<10)
#define SAITR_RDBDB (1<<11)
+#endif /* !CONFIG_ARCH_PXA */
+
/*
* General-Purpose I/O Interface
*
--- /dev/null
+#ifndef _ARM_KEXEC_H
+#define _ARM_KEXEC_H
+
+#ifdef CONFIG_KEXEC
+
+/* Maximum physical address we can use pages from */
+#define KEXEC_SOURCE_MEMORY_LIMIT (-1UL)
+/* Maximum address we can reach in physical address mode */
+#define KEXEC_DESTINATION_MEMORY_LIMIT (-1UL)
+/* Maximum address we can use for the control code buffer */
+#define KEXEC_CONTROL_MEMORY_LIMIT TASK_SIZE
+
+#define KEXEC_CONTROL_CODE_SIZE 4096
+
+#define KEXEC_ARCH KEXEC_ARCH_ARM
+
+#ifndef __ASSEMBLY__
+
+#define MAX_NOTE_BYTES 1024
+
+struct kimage;
+/* Provide a dummy definition to avoid build failures. */
+static inline void crash_setup_regs(struct pt_regs *newregs,
+ struct pt_regs *oldregs) { }
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* CONFIG_KEXEC */
+
+#endif /* _ARM_KEXEC_H */
#ifndef __ASSEMBLY__
/*
- * The following macros handle the cache and bufferable bits...
+ * The pgprot_* and protection_map entries will be fixed up in runtime
+ * to include the cachable and bufferable bits based on memory policy,
+ * as well as any architecture dependent bits like global/ASID and SMP
+ * shared mapping bits.
*/
#define _L_PTE_DEFAULT L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_CACHEABLE | L_PTE_BUFFERABLE
#define _L_PTE_READ L_PTE_USER | L_PTE_EXEC
+extern pgprot_t pgprot_user;
extern pgprot_t pgprot_kernel;
-#define PAGE_NONE __pgprot(_L_PTE_DEFAULT)
-#define PAGE_COPY __pgprot(_L_PTE_DEFAULT | _L_PTE_READ)
-#define PAGE_SHARED __pgprot(_L_PTE_DEFAULT | _L_PTE_READ | L_PTE_WRITE)
-#define PAGE_READONLY __pgprot(_L_PTE_DEFAULT | _L_PTE_READ)
+#define PAGE_NONE pgprot_user
+#define PAGE_COPY __pgprot(pgprot_val(pgprot_user) | _L_PTE_READ)
+#define PAGE_SHARED __pgprot(pgprot_val(pgprot_user) | _L_PTE_READ | \
+ L_PTE_WRITE)
+#define PAGE_READONLY __pgprot(pgprot_val(pgprot_user) | _L_PTE_READ)
#define PAGE_KERNEL pgprot_kernel
+#define __PAGE_NONE __pgprot(_L_PTE_DEFAULT)
+#define __PAGE_COPY __pgprot(_L_PTE_DEFAULT | _L_PTE_READ)
+#define __PAGE_SHARED __pgprot(_L_PTE_DEFAULT | _L_PTE_READ | L_PTE_WRITE)
+#define __PAGE_READONLY __pgprot(_L_PTE_DEFAULT | _L_PTE_READ)
+
#endif /* __ASSEMBLY__ */
/*
* 2) If we could do execute protection, then read is implied
* 3) write implies read permissions
*/
-#define __P000 PAGE_NONE
-#define __P001 PAGE_READONLY
-#define __P010 PAGE_COPY
-#define __P011 PAGE_COPY
-#define __P100 PAGE_READONLY
-#define __P101 PAGE_READONLY
-#define __P110 PAGE_COPY
-#define __P111 PAGE_COPY
-
-#define __S000 PAGE_NONE
-#define __S001 PAGE_READONLY
-#define __S010 PAGE_SHARED
-#define __S011 PAGE_SHARED
-#define __S100 PAGE_READONLY
-#define __S101 PAGE_READONLY
-#define __S110 PAGE_SHARED
-#define __S111 PAGE_SHARED
+#define __P000 __PAGE_NONE
+#define __P001 __PAGE_READONLY
+#define __P010 __PAGE_COPY
+#define __P011 __PAGE_COPY
+#define __P100 __PAGE_READONLY
+#define __P101 __PAGE_READONLY
+#define __P110 __PAGE_COPY
+#define __P111 __PAGE_COPY
+
+#define __S000 __PAGE_NONE
+#define __S001 __PAGE_READONLY
+#define __S010 __PAGE_SHARED
+#define __S011 __PAGE_SHARED
+#define __S100 __PAGE_READONLY
+#define __S101 __PAGE_READONLY
+#define __S110 __PAGE_SHARED
+#define __S111 __PAGE_SHARED
#ifndef __ASSEMBLY__
/*
-/*
+/* linux/include/asm-arm/plat-s3c24xx/clock.h
* linux/arch/arm/mach-s3c2410/clock.h
*
* Copyright (c) 2004-2005 Simtec Electronics
-/* linux/arch/arm/mach-s3c2410/common-smdk.h
+/* linux/include/asm-arm/plat-s3c24xx/common-smdk.h
*
* Copyright (c) 2006 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
-/* arch/arm/mach-s3c2410/cpu.h
+/* linux/include/asm-arm/plat-s3c24xx/cpu.h
*
* Copyright (c) 2004-2005 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
extern struct sysdev_class s3c2412_sysclass;
extern struct sysdev_class s3c2440_sysclass;
extern struct sysdev_class s3c2442_sysclass;
+extern struct sysdev_class s3c2443_sysclass;
-/* arch/arm/mach-s3c2410/devs.h
+/* linux/include/asm-arm/plat-s3c24xx/devs.h
*
* Copyright (c) 2004 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
-/* arch/arm/mach-s3c2410/dma.h
+/* linux/include/asm-arm/plat-s3c24xx/dma.h
*
* Copyright (C) 2006 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
extern struct s3c2410_dma_chan s3c2410_chans[S3C2410_DMA_CHANNELS];
#define DMA_CH_VALID (1<<31)
+#define DMA_CH_NEVER (1<<30)
struct s3c24xx_dma_addr {
unsigned long from;
};
extern int s3c24xx_dma_init_map(struct s3c24xx_dma_selection *sel);
+
+/* struct s3c24xx_dma_order_ch
+ *
+ * channel map for one of the `enum dma_ch` dma channels. the list
+ * entry contains a set of low-level channel numbers, orred with
+ * DMA_CH_VALID, which are checked in the order in the array.
+*/
+
+struct s3c24xx_dma_order_ch {
+ unsigned int list[S3C2410_DMA_CHANNELS]; /* list of channels */
+ unsigned int flags; /* flags */
+};
+
+/* struct s3c24xx_dma_order
+ *
+ * information provided by either the core or the board to give the
+ * dma system a hint on how to allocate channels
+*/
+
+struct s3c24xx_dma_order {
+ struct s3c24xx_dma_order_ch channels[DMACH_MAX];
+};
+
+extern int s3c24xx_dma_order_set(struct s3c24xx_dma_order *map);
+
+/* DMA init code, called from the cpu support code */
+
+extern int s3c2410_dma_init(void);
+
+extern int s3c24xx_dma_init(unsigned int channels, unsigned int irq,
+ unsigned int stride);
-/* arch/arm/mach-s3c2410/irq.h
+/* linux/include/asm-arm/plat-s3c24xx/irq.h
*
* Copyright (c) 2004-2005 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
-/* linux/arch/arm/mach-s3c2410/pm.h
+/* linux/include/asm-arm/plat-s3c24xx/pm.h
*
* Copyright (c) 2004 Simtec Electronics
* Written by Ben Dooks, <ben@simtec.co.uk>
-/* arch/arm/mach-s3c2410/s3c2400.h
+/* linux/include/asm-arm/plat-s3c24xx/s3c2400.h
*
* Copyright (c) 2004 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
-/* arch/arm/mach-s3c2410/s3c2410.h
+/* linux/include/asm-arm/plat-s3c24xx/s3c2410.h
*
* Copyright (c) 2004 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
-/* arch/arm/mach-s3c2410/s3c2412.h
+/* linux/include/asm-arm/plat-s3c24xx/s3c2412.h
*
* Copyright (c) 2006 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
-/* arch/arm/mach-s3c2410/s3c2440.h
+/* linux/include/asm-arm/plat-s3c24xx/s3c2440.h
*
* Copyright (c) 2004-2005 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
-/* arch/arm/mach-s3c2410/s3c2442.h
+/* linux/include/asm-arm/plat-s3c24xx/s3c2442.h
*
* Copyright (c) 2006 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
--- /dev/null
+/* linux/include/asm-arm/plat-s3c24xx/s3c2443.h
+ *
+ * Copyright (c) 2004-2005 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * Header file for s3c2443 cpu support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifdef CONFIG_CPU_S3C2443
+
+struct s3c2410_uartcfg;
+
+extern int s3c2443_init(void);
+
+extern void s3c2443_map_io(struct map_desc *mach_desc, int size);
+
+extern void s3c2443_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+
+extern void s3c2443_init_clocks(int xtal);
+
+extern int s3c2443_baseclk_add(void);
+
+#else
+#define s3c2443_init_clocks NULL
+#define s3c2443_init_uarts NULL
+#define s3c2443_map_io NULL
+#define s3c2443_init NULL
+#endif
#define cpu_is_xscale() 1
#endif
+#define UDBG_UNDEFINED (1 << 0)
+#define UDBG_SYSCALL (1 << 1)
+#define UDBG_BADABORT (1 << 2)
+#define UDBG_SEGV (1 << 3)
+#define UDBG_BUS (1 << 4)
+
+extern unsigned int user_debug;
+
+#if __LINUX_ARM_ARCH__ >= 4
+#define vectors_high() (cr_alignment & CR_V)
+#else
+#define vectors_high() (0)
+#endif
+
+#if __LINUX_ARM_ARCH__ >= 6
+#define isb() __asm__ __volatile__ ("mcr p15, 0, %0, c7, c5, 4" \
+ : : "r" (0) : "memory")
+#define dsb() __asm__ __volatile__ ("mcr p15, 0, %0, c7, c10, 4" \
+ : : "r" (0) : "memory")
+#define dmb() __asm__ __volatile__ ("mcr p15, 0, %0, c7, c10, 5" \
+ : : "r" (0) : "memory")
+#else
+#define isb() __asm__ __volatile__ ("" : : : "memory")
+#define dsb() __asm__ __volatile__ ("mcr p15, 0, %0, c7, c10, 4" \
+ : : "r" (0) : "memory")
+#define dmb() __asm__ __volatile__ ("" : : : "memory")
+#endif
+#define mb() dmb()
+#define rmb() mb()
+#define wmb() mb()
+#define read_barrier_depends() do { } while(0)
+#define set_mb(var, value) do { var = value; mb(); } while (0)
+#define nop() __asm__ __volatile__("mov\tr0,r0\t@ nop\n\t");
+
extern unsigned long cr_no_alignment; /* defined in entry-armv.S */
extern unsigned long cr_alignment; /* defined in entry-armv.S */
{
asm volatile("mcr p15, 0, %0, c1, c0, 0 @ set CR"
: : "r" (val) : "cc");
+ isb();
}
#ifndef CONFIG_SMP
{
asm volatile("mcr p15, 0, %0, c1, c0, 2 @ set copro access"
: : "r" (val) : "cc");
+ isb();
}
-#define UDBG_UNDEFINED (1 << 0)
-#define UDBG_SYSCALL (1 << 1)
-#define UDBG_BADABORT (1 << 2)
-#define UDBG_SEGV (1 << 3)
-#define UDBG_BUS (1 << 4)
-
-extern unsigned int user_debug;
-
-#if __LINUX_ARM_ARCH__ >= 4
-#define vectors_high() (cr_alignment & CR_V)
-#else
-#define vectors_high() (0)
-#endif
-
-#if __LINUX_ARM_ARCH__ >= 6
-#define mb() __asm__ __volatile__ ("mcr p15, 0, %0, c7, c10, 5" \
- : : "r" (0) : "memory")
-#else
-#define mb() __asm__ __volatile__ ("" : : : "memory")
-#endif
-#define rmb() mb()
-#define wmb() mb()
-#define read_barrier_depends() do { } while(0)
-#define set_mb(var, value) do { var = value; mb(); } while (0)
-#define nop() __asm__ __volatile__("mov\tr0,r0\t@ nop\n\t");
-
/*
* switch_mm() may do a full cache flush over the context switch,
* so enable interrupts over the context switch to avoid high
const unsigned int __tlb_flag = __cpu_tlb_flags;
if (tlb_flag(TLB_WB))
- asm("mcr p15, 0, %0, c7, c10, 4" : : "r" (zero) : "cc");
+ dsb();
if (tlb_flag(TLB_V3_FULL))
asm("mcr p15, 0, %0, c6, c0, 0" : : "r" (zero) : "cc");
asm("mcr p15, 0, %0, c8, c6, 0" : : "r" (zero) : "cc");
if (tlb_flag(TLB_V4_I_FULL | TLB_V6_I_FULL))
asm("mcr p15, 0, %0, c8, c5, 0" : : "r" (zero) : "cc");
+
+ if (tlb_flag(TLB_V6_I_FULL | TLB_V6_D_FULL |
+ TLB_V6_I_PAGE | TLB_V6_D_PAGE |
+ TLB_V6_I_ASID | TLB_V6_D_ASID)) {
+ /* flush the branch target cache */
+ asm("mcr p15, 0, %0, c7, c5, 6" : : "r" (zero) : "cc");
+ dsb();
+ isb();
+ }
}
static inline void local_flush_tlb_mm(struct mm_struct *mm)
const unsigned int __tlb_flag = __cpu_tlb_flags;
if (tlb_flag(TLB_WB))
- asm("mcr p15, 0, %0, c7, c10, 4" : : "r" (zero) : "cc");
+ dsb();
if (cpu_isset(smp_processor_id(), mm->cpu_vm_mask)) {
if (tlb_flag(TLB_V3_FULL))
asm("mcr p15, 0, %0, c8, c6, 2" : : "r" (asid) : "cc");
if (tlb_flag(TLB_V6_I_ASID))
asm("mcr p15, 0, %0, c8, c5, 2" : : "r" (asid) : "cc");
+
+ if (tlb_flag(TLB_V6_I_FULL | TLB_V6_D_FULL |
+ TLB_V6_I_PAGE | TLB_V6_D_PAGE |
+ TLB_V6_I_ASID | TLB_V6_D_ASID)) {
+ /* flush the branch target cache */
+ asm("mcr p15, 0, %0, c7, c5, 6" : : "r" (zero) : "cc");
+ dsb();
+ }
}
static inline void
uaddr = (uaddr & PAGE_MASK) | ASID(vma->vm_mm);
if (tlb_flag(TLB_WB))
- asm("mcr p15, 0, %0, c7, c10, 4" : : "r" (zero));
+ dsb();
if (cpu_isset(smp_processor_id(), vma->vm_mm->cpu_vm_mask)) {
if (tlb_flag(TLB_V3_PAGE))
asm("mcr p15, 0, %0, c8, c6, 1" : : "r" (uaddr) : "cc");
if (tlb_flag(TLB_V6_I_PAGE))
asm("mcr p15, 0, %0, c8, c5, 1" : : "r" (uaddr) : "cc");
+
+ if (tlb_flag(TLB_V6_I_FULL | TLB_V6_D_FULL |
+ TLB_V6_I_PAGE | TLB_V6_D_PAGE |
+ TLB_V6_I_ASID | TLB_V6_D_ASID)) {
+ /* flush the branch target cache */
+ asm("mcr p15, 0, %0, c7, c5, 6" : : "r" (zero) : "cc");
+ dsb();
+ }
}
static inline void local_flush_tlb_kernel_page(unsigned long kaddr)
kaddr &= PAGE_MASK;
if (tlb_flag(TLB_WB))
- asm("mcr p15, 0, %0, c7, c10, 4" : : "r" (zero) : "cc");
+ dsb();
if (tlb_flag(TLB_V3_PAGE))
asm("mcr p15, 0, %0, c6, c0, 0" : : "r" (kaddr) : "cc");
if (tlb_flag(TLB_V6_I_PAGE))
asm("mcr p15, 0, %0, c8, c5, 1" : : "r" (kaddr) : "cc");
- /* The ARM ARM states that the completion of a TLB maintenance
- * operation is only guaranteed by a DSB instruction
- */
- if (tlb_flag(TLB_V6_U_PAGE | TLB_V6_D_PAGE | TLB_V6_I_PAGE))
- asm("mcr p15, 0, %0, c7, c10, 4" : : "r" (zero) : "cc");
+ if (tlb_flag(TLB_V6_I_FULL | TLB_V6_D_FULL |
+ TLB_V6_I_PAGE | TLB_V6_D_PAGE |
+ TLB_V6_I_ASID | TLB_V6_D_ASID)) {
+ /* flush the branch target cache */
+ asm("mcr p15, 0, %0, c7, c5, 6" : : "r" (zero) : "cc");
+ dsb();
+ isb();
+ }
}
/*
*/
static inline void flush_pmd_entry(pmd_t *pmd)
{
- const unsigned int zero = 0;
const unsigned int __tlb_flag = __cpu_tlb_flags;
if (tlb_flag(TLB_DCLEAN))
asm("mcr p15, 0, %0, c7, c10, 1 @ flush_pmd"
: : "r" (pmd) : "cc");
if (tlb_flag(TLB_WB))
- asm("mcr p15, 0, %0, c7, c10, 4 @ flush_pmd"
- : : "r" (zero) : "cc");
+ dsb();
}
static inline void clean_pmd_entry(pmd_t *pmd)
#define __NR_move_pages (__NR_SYSCALL_BASE+344)
#define __NR_getcpu (__NR_SYSCALL_BASE+345)
/* 346 for epoll_pwait */
+#define __NR_sys_kexec_load (__NR_SYSCALL_BASE+347)
/*
* The following SWIs are ARM private.
+++ /dev/null
-/*
- * include/asm-arm/arch-at91rm9200/at91_pdc.h
- *
- * Copyright (C) 2005 Ivan Kokshaysky
- * Copyright (C) SAN People
- *
- * Peripheral Data Controller (PDC) registers.
- * Based on AT91RM9200 datasheet revision E.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91_PDC_H
-#define AT91_PDC_H
-
-#define AT91_PDC_RPR 0x100 /* Receive Pointer Register */
-#define AT91_PDC_RCR 0x104 /* Receive Counter Register */
-#define AT91_PDC_TPR 0x108 /* Transmit Pointer Register */
-#define AT91_PDC_TCR 0x10c /* Transmit Counter Register */
-#define AT91_PDC_RNPR 0x110 /* Receive Next Pointer Register */
-#define AT91_PDC_RNCR 0x114 /* Receive Next Counter Register */
-#define AT91_PDC_TNPR 0x118 /* Transmit Next Pointer Register */
-#define AT91_PDC_TNCR 0x11c /* Transmit Next Counter Register */
-
-#define AT91_PDC_PTCR 0x120 /* Transfer Control Register */
-#define AT91_PDC_RXTEN (1 << 0) /* Receiver Transfer Enable */
-#define AT91_PDC_RXTDIS (1 << 1) /* Receiver Transfer Disable */
-#define AT91_PDC_TXTEN (1 << 8) /* Transmitter Transfer Enable */
-#define AT91_PDC_TXTDIS (1 << 9) /* Transmitter Transfer Disable */
-
-#define AT91_PDC_PTSR 0x124 /* Transfer Status Register */
-
-#endif
--- /dev/null
+/*
+ * include/linux/atmel_pdc.h
+ *
+ * Copyright (C) 2005 Ivan Kokshaysky
+ * Copyright (C) SAN People
+ *
+ * Peripheral Data Controller (PDC) registers.
+ * Based on AT91RM9200 datasheet revision E.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef ATMEL_PDC_H
+#define ATMEL_PDC_H
+
+#define ATMEL_PDC_RPR 0x100 /* Receive Pointer Register */
+#define ATMEL_PDC_RCR 0x104 /* Receive Counter Register */
+#define ATMEL_PDC_TPR 0x108 /* Transmit Pointer Register */
+#define ATMEL_PDC_TCR 0x10c /* Transmit Counter Register */
+#define ATMEL_PDC_RNPR 0x110 /* Receive Next Pointer Register */
+#define ATMEL_PDC_RNCR 0x114 /* Receive Next Counter Register */
+#define ATMEL_PDC_TNPR 0x118 /* Transmit Next Pointer Register */
+#define ATMEL_PDC_TNCR 0x11c /* Transmit Next Counter Register */
+
+#define ATMEL_PDC_PTCR 0x120 /* Transfer Control Register */
+#define ATMEL_PDC_RXTEN (1 << 0) /* Receiver Transfer Enable */
+#define ATMEL_PDC_RXTDIS (1 << 1) /* Receiver Transfer Disable */
+#define ATMEL_PDC_TXTEN (1 << 8) /* Transmitter Transfer Enable */
+#define ATMEL_PDC_TXTDIS (1 << 9) /* Transmitter Transfer Disable */
+
+#define ATMEL_PDC_PTSR 0x124 /* Transfer Status Register */
+
+#endif
#define KEXEC_ARCH_PPC (20 << 16)
#define KEXEC_ARCH_PPC64 (21 << 16)
#define KEXEC_ARCH_IA_64 (50 << 16)
+#define KEXEC_ARCH_ARM (40 << 16)
#define KEXEC_ARCH_S390 (22 << 16)
#define KEXEC_ARCH_SH (42 << 16)
#define KEXEC_ARCH_MIPS_LE (10 << 16)
* SI1TxEn, SI2TxEn and SI12TxEn bits are set in the AACI_MAINCR
* register.
*/
-static void aaci_ac97_write(struct snd_ac97 *ac97, unsigned short reg, unsigned short val)
+static void aaci_ac97_write(struct snd_ac97 *ac97, unsigned short reg,
+ unsigned short val)
{
struct aaci *aaci = ac97->private_data;
u32 v;
+ int timeout = 5000;
if (ac97->num >= 4)
return;
*/
do {
v = readl(aaci->base + AACI_SLFR);
- } while (v & (SLFR_1TXB|SLFR_2TXB));
+ } while ((v & (SLFR_1TXB|SLFR_2TXB)) && timeout--);
+
+ if (!timeout)
+ dev_err(&aaci->dev->dev,
+ "timeout waiting for write to complete\n");
mutex_unlock(&aaci->ac97_sem);
}
{
struct aaci *aaci = ac97->private_data;
u32 v;
+ int timeout = 5000;
+ int retries = 10;
if (ac97->num >= 4)
return ~0;
*/
do {
v = readl(aaci->base + AACI_SLFR);
- } while (v & SLFR_1TXB);
+ } while ((v & SLFR_1TXB) && timeout--);
+
+ if (!timeout) {
+ dev_err(&aaci->dev->dev, "timeout on slot 1 TX busy\n");
+ v = ~0;
+ goto out;
+ }
/*
* Give the AC'97 codec more than enough time
/*
* Wait for slot 2 to indicate data.
*/
+ timeout = 5000;
do {
cond_resched();
v = readl(aaci->base + AACI_SLFR) & (SLFR_1RXV|SLFR_2RXV);
- } while (v != (SLFR_1RXV|SLFR_2RXV));
+ } while ((v != (SLFR_1RXV|SLFR_2RXV)) && timeout--);
- v = readl(aaci->base + AACI_SL1RX) >> 12;
- if (v == reg) {
- v = readl(aaci->base + AACI_SL2RX) >> 4;
- } else {
- dev_err(&aaci->dev->dev,
- "wrong ac97 register read back (%x != %x)\n",
- v, reg);
+ if (!timeout) {
+ dev_err(&aaci->dev->dev, "timeout on RX valid\n");
v = ~0;
+ goto out;
}
+ do {
+ v = readl(aaci->base + AACI_SL1RX) >> 12;
+ if (v == reg) {
+ v = readl(aaci->base + AACI_SL2RX) >> 4;
+ break;
+ } else if (--retries) {
+ dev_warn(&aaci->dev->dev,
+ "ac97 read back fail. retry\n");
+ continue;
+ } else {
+ dev_warn(&aaci->dev->dev,
+ "wrong ac97 register read back (%x != %x)\n",
+ v, reg);
+ v = ~0;
+ }
+ } while (retries);
+ out:
mutex_unlock(&aaci->ac97_sem);
return v;
}
/*
* Interrupt support.
*/
-static void aaci_fifo_irq(struct aaci *aaci, u32 mask)
+static void aaci_fifo_irq(struct aaci *aaci, int channel, u32 mask)
{
+ if (mask & ISR_ORINTR) {
+ dev_warn(&aaci->dev->dev, "RX overrun on chan %d\n", channel);
+ writel(ICLR_RXOEC1 << channel, aaci->base + AACI_INTCLR);
+ }
+
+ if (mask & ISR_RXTOINTR) {
+ dev_warn(&aaci->dev->dev, "RX timeout on chan %d\n", channel);
+ writel(ICLR_RXTOFEC1 << channel, aaci->base + AACI_INTCLR);
+ }
+
+ if (mask & ISR_RXINTR) {
+ struct aaci_runtime *aacirun = &aaci->capture;
+ void *ptr;
+
+ if (!aacirun->substream || !aacirun->start) {
+ dev_warn(&aaci->dev->dev, "RX interrupt???");
+ writel(0, aacirun->base + AACI_IE);
+ return;
+ }
+ ptr = aacirun->ptr;
+
+ do {
+ unsigned int len = aacirun->fifosz;
+ u32 val;
+
+ if (aacirun->bytes <= 0) {
+ aacirun->bytes += aacirun->period;
+ aacirun->ptr = ptr;
+ spin_unlock(&aaci->lock);
+ snd_pcm_period_elapsed(aacirun->substream);
+ spin_lock(&aaci->lock);
+ }
+ if (!(aacirun->cr & CR_EN))
+ break;
+
+ val = readl(aacirun->base + AACI_SR);
+ if (!(val & SR_RXHF))
+ break;
+ if (!(val & SR_RXFF))
+ len >>= 1;
+
+ aacirun->bytes -= len;
+
+ /* reading 16 bytes at a time */
+ for( ; len > 0; len -= 16) {
+ asm(
+ "ldmia %1, {r0, r1, r2, r3}\n\t"
+ "stmia %0!, {r0, r1, r2, r3}"
+ : "+r" (ptr)
+ : "r" (aacirun->fifo)
+ : "r0", "r1", "r2", "r3", "cc");
+
+ if (ptr >= aacirun->end)
+ ptr = aacirun->start;
+ }
+ } while(1);
+ aacirun->ptr = ptr;
+ }
+
if (mask & ISR_URINTR) {
- writel(ICLR_TXUEC1, aaci->base + AACI_INTCLR);
+ dev_dbg(&aaci->dev->dev, "TX underrun on chan %d\n", channel);
+ writel(ICLR_TXUEC1 << channel, aaci->base + AACI_INTCLR);
}
if (mask & ISR_TXINTR) {
snd_pcm_period_elapsed(aacirun->substream);
spin_lock(&aaci->lock);
}
- if (!(aacirun->cr & TXCR_TXEN))
+ if (!(aacirun->cr & CR_EN))
break;
val = readl(aacirun->base + AACI_SR);
u32 m = mask;
for (i = 0; i < 4; i++, m >>= 7) {
if (m & 0x7f) {
- aaci_fifo_irq(aaci, m);
+ aaci_fifo_irq(aaci, i, m);
}
}
}
.periods_max = PAGE_SIZE / 16,
};
-static int aaci_pcm_open(struct aaci *aaci, struct snd_pcm_substream *substream,
- struct aaci_runtime *aacirun)
+static int __aaci_pcm_open(struct aaci *aaci,
+ struct snd_pcm_substream *substream,
+ struct aaci_runtime *aacirun)
{
struct snd_pcm_runtime *runtime = substream->runtime;
int ret;
struct aaci *aaci = substream->private_data;
struct aaci_runtime *aacirun = substream->runtime->private_data;
- WARN_ON(aacirun->cr & TXCR_TXEN);
+ WARN_ON(aacirun->cr & CR_EN);
aacirun->substream = NULL;
free_irq(aaci->dev->irq[0], aaci);
/*
* This must not be called with the device enabled.
*/
- WARN_ON(aacirun->cr & TXCR_TXEN);
+ WARN_ON(aacirun->cr & CR_EN);
if (aacirun->pcm_open)
snd_ac97_pcm_close(aacirun->pcm);
if (err < 0)
goto out;
- err = snd_ac97_pcm_open(aacirun->pcm, params_rate(params),
- params_channels(params),
- aacirun->pcm->r[0].slots);
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+ err = snd_ac97_pcm_open(aacirun->pcm, params_rate(params),
+ params_channels(params),
+ aacirun->pcm->r[0].slots);
+ else
+ err = snd_ac97_pcm_open(aacirun->pcm, params_rate(params),
+ params_channels(params),
+ aacirun->pcm->r[1].slots);
+
if (err)
goto out;
* Playback specific ALSA stuff
*/
static const u32 channels_to_txmask[] = {
- [2] = TXCR_TX3 | TXCR_TX4,
- [4] = TXCR_TX3 | TXCR_TX4 | TXCR_TX7 | TXCR_TX8,
- [6] = TXCR_TX3 | TXCR_TX4 | TXCR_TX7 | TXCR_TX8 | TXCR_TX6 | TXCR_TX9,
+ [2] = CR_SL3 | CR_SL4,
+ [4] = CR_SL3 | CR_SL4 | CR_SL7 | CR_SL8,
+ [6] = CR_SL3 | CR_SL4 | CR_SL7 | CR_SL8 | CR_SL6 | CR_SL9,
};
/*
chan_mask);
}
-static int aaci_pcm_playback_open(struct snd_pcm_substream *substream)
+static int aaci_pcm_open(struct snd_pcm_substream *substream)
{
struct aaci *aaci = substream->private_data;
int ret;
if (ret)
return ret;
- return aaci_pcm_open(aaci, substream, &aaci->playback);
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
+ ret = __aaci_pcm_open(aaci, substream, &aaci->playback);
+ } else {
+ ret = __aaci_pcm_open(aaci, substream, &aaci->capture);
+ }
+ return ret;
}
static int aaci_pcm_playback_hw_params(struct snd_pcm_substream *substream,
* FIXME: double rate slots?
*/
if (ret >= 0) {
- aacirun->cr = TXCR_FEN | TXCR_COMPACT | TXCR_TSZ16;
+ aacirun->cr = CR_FEN | CR_COMPACT | CR_SZ16;
aacirun->cr |= channels_to_txmask[channels];
aacirun->fifosz = aaci->fifosize * 4;
- if (aacirun->cr & TXCR_COMPACT)
+ if (aacirun->cr & CR_COMPACT)
aacirun->fifosz >>= 1;
}
return ret;
ie = readl(aacirun->base + AACI_IE);
ie &= ~(IE_URIE|IE_TXIE);
writel(ie, aacirun->base + AACI_IE);
- aacirun->cr &= ~TXCR_TXEN;
+ aacirun->cr &= ~CR_EN;
aaci_chan_wait_ready(aacirun);
writel(aacirun->cr, aacirun->base + AACI_TXCR);
}
u32 ie;
aaci_chan_wait_ready(aacirun);
- aacirun->cr |= TXCR_TXEN;
+ aacirun->cr |= CR_EN;
ie = readl(aacirun->base + AACI_IE);
ie |= IE_URIE | IE_TXIE;
}
static struct snd_pcm_ops aaci_playback_ops = {
- .open = aaci_pcm_playback_open,
+ .open = aaci_pcm_open,
.close = aaci_pcm_close,
.ioctl = snd_pcm_lib_ioctl,
.hw_params = aaci_pcm_playback_hw_params,
.mmap = aaci_pcm_mmap,
};
+static int aaci_pcm_capture_hw_params(snd_pcm_substream_t *substream,
+ snd_pcm_hw_params_t *params)
+{
+ struct aaci *aaci = substream->private_data;
+ struct aaci_runtime *aacirun = substream->runtime->private_data;
+ int ret;
+
+ ret = aaci_pcm_hw_params(substream, aacirun, params);
+
+ if (ret >= 0) {
+ aacirun->cr = CR_FEN | CR_COMPACT | CR_SZ16;
+
+ /* Line in record: slot 3 and 4 */
+ aacirun->cr |= CR_SL3 | CR_SL4;
+
+ aacirun->fifosz = aaci->fifosize * 4;
+
+ if (aacirun->cr & CR_COMPACT)
+ aacirun->fifosz >>= 1;
+ }
+ return ret;
+}
+
+static void aaci_pcm_capture_stop(struct aaci_runtime *aacirun)
+{
+ u32 ie;
+
+ aaci_chan_wait_ready(aacirun);
+
+ ie = readl(aacirun->base + AACI_IE);
+ ie &= ~(IE_ORIE | IE_RXIE);
+ writel(ie, aacirun->base+AACI_IE);
+
+ aacirun->cr &= ~CR_EN;
+
+ writel(aacirun->cr, aacirun->base + AACI_RXCR);
+}
+
+static void aaci_pcm_capture_start(struct aaci_runtime *aacirun)
+{
+ u32 ie;
+
+ aaci_chan_wait_ready(aacirun);
+
+#ifdef DEBUG
+ /* RX Timeout value: bits 28:17 in RXCR */
+ aacirun->cr |= 0xf << 17;
+#endif
+
+ aacirun->cr |= CR_EN;
+ writel(aacirun->cr, aacirun->base + AACI_RXCR);
+
+ ie = readl(aacirun->base + AACI_IE);
+ ie |= IE_ORIE |IE_RXIE; // overrun and rx interrupt -- half full
+ writel(ie, aacirun->base + AACI_IE);
+}
+
+static int aaci_pcm_capture_trigger(snd_pcm_substream_t *substream, int cmd){
+
+ struct aaci *aaci = substream->private_data;
+ struct aaci_runtime *aacirun = substream->runtime->private_data;
+ unsigned long flags;
+ int ret = 0;
+
+ spin_lock_irqsave(&aaci->lock, flags);
+
+ switch (cmd) {
+ case SNDRV_PCM_TRIGGER_START:
+ aaci_pcm_capture_start(aacirun);
+ break;
+
+ case SNDRV_PCM_TRIGGER_RESUME:
+ aaci_pcm_capture_start(aacirun);
+ break;
+
+ case SNDRV_PCM_TRIGGER_STOP:
+ aaci_pcm_capture_stop(aacirun);
+ break;
+
+ case SNDRV_PCM_TRIGGER_SUSPEND:
+ aaci_pcm_capture_stop(aacirun);
+ break;
+
+ case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
+ break;
+
+ case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
+ break;
+
+ default:
+ ret = -EINVAL;
+ }
+
+ spin_unlock_irqrestore(&aaci->lock, flags);
+
+ return ret;
+}
+static int aaci_pcm_capture_prepare(snd_pcm_substream_t *substream)
+{
+ struct snd_pcm_runtime *runtime = substream->runtime;
+ struct aaci *aaci = substream->private_data;
+
+ aaci_pcm_prepare(substream);
+
+ /* allow changing of sample rate */
+ aaci_ac97_write(aaci->ac97, AC97_EXTENDED_STATUS, 0x0001); /* VRA */
+ aaci_ac97_write(aaci->ac97, AC97_PCM_LR_ADC_RATE, runtime->rate);
+ aaci_ac97_write(aaci->ac97, AC97_PCM_MIC_ADC_RATE, runtime->rate);
+
+ /* Record select: Mic: 0, Aux: 3, Line: 4 */
+ aaci_ac97_write(aaci->ac97, AC97_REC_SEL, 0x0404);
+
+ return 0;
+}
+
+static snd_pcm_ops_t aaci_capture_ops = {
+ .open = aaci_pcm_open,
+ .close = aaci_pcm_close,
+ .ioctl = snd_pcm_lib_ioctl,
+ .hw_params = aaci_pcm_capture_hw_params,
+ .hw_free = aaci_pcm_hw_free,
+ .prepare = aaci_pcm_capture_prepare,
+ .trigger = aaci_pcm_capture_trigger,
+ .pointer = aaci_pcm_pointer,
+ .mmap = aaci_pcm_mmap,
+};
/*
* Power Management.
static struct ac97_pcm ac97_defs[] __devinitdata = {
- [0] = { /* Front PCM */
+ [0] = { /* Front PCM */
.exclusive = 1,
.r = {
[0] = {
ret = snd_ac97_mixer(ac97_bus, &ac97_template, &ac97);
if (ret)
goto out;
+ aaci->ac97 = ac97;
/*
* Disable AC97 PC Beep input on audio codecs.
goto out;
aaci->playback.pcm = &ac97_bus->pcms[0];
+ aaci->capture.pcm = &ac97_bus->pcms[1];
out:
return ret;
struct snd_pcm *pcm;
int ret;
- ret = snd_pcm_new(aaci->card, "AACI AC'97", 0, 1, 0, &pcm);
+ ret = snd_pcm_new(aaci->card, "AACI AC'97", 0, 1, 1, &pcm);
if (ret == 0) {
aaci->pcm = pcm;
pcm->private_data = aaci;
strlcpy(pcm->name, DRIVER_NAME, sizeof(pcm->name));
snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK, &aaci_playback_ops);
+ snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_CAPTURE, &aaci_capture_ops);
}
return ret;
static unsigned int __devinit aaci_size_fifo(struct aaci *aaci)
{
- void __iomem *base = aaci->base + AACI_CSCH1;
+ struct aaci_runtime *aacirun = &aaci->playback;
int i;
- writel(TXCR_FEN | TXCR_TSZ16 | TXCR_TXEN, base + AACI_TXCR);
+ writel(CR_FEN | CR_SZ16 | CR_EN, aacirun->base + AACI_TXCR);
- for (i = 0; !(readl(base + AACI_SR) & SR_TXFF) && i < 4096; i++)
- writel(0, aaci->base + AACI_DR1);
+ for (i = 0; !(readl(aacirun->base + AACI_SR) & SR_TXFF) && i < 4096; i++)
+ writel(0, aacirun->fifo);
- writel(0, base + AACI_TXCR);
+ writel(0, aacirun->base + AACI_TXCR);
/*
* Re-initialise the AACI after the FIFO depth test, to
aaci->playback.base = aaci->base + AACI_CSCH1;
aaci->playback.fifo = aaci->base + AACI_DR1;
+ /*
+ * Capture uses AACI channel 0
+ */
+ aaci->capture.base = aaci->base + AACI_CSCH1;
+ aaci->capture.fifo = aaci->base + AACI_DR1;
+
for (i = 0; i < 4; i++) {
void __iomem *base = aaci->base + i * 0x14;
ret = snd_card_register(aaci->card);
if (ret == 0) {
dev_info(&dev->dev, "%s, fifo %d\n", aaci->card->longname,
- aaci->fifosize);
+ aaci->fifosize);
amba_set_drvdata(dev, aaci->card);
return ret;
}
#define AACI_DR4 0x0f0 /* data read/written fifo 4 */
/*
- * transmit fifo control register. P48
+ * TX/RX fifo control register (CR). P48
*/
-#define TXCR_FEN (1 << 16) /* fifo enable */
-#define TXCR_COMPACT (1 << 15) /* compact mode */
-#define TXCR_TSZ16 (0 << 13) /* 16 bits */
-#define TXCR_TSZ18 (1 << 13) /* 18 bits */
-#define TXCR_TSZ20 (2 << 13) /* 20 bits */
-#define TXCR_TSZ12 (3 << 13) /* 12 bits */
-#define TXCR_TX12 (1 << 12) /* transmits slot 12 */
-#define TXCR_TX11 (1 << 11) /* transmits slot 12 */
-#define TXCR_TX10 (1 << 10) /* transmits slot 12 */
-#define TXCR_TX9 (1 << 9) /* transmits slot 12 */
-#define TXCR_TX8 (1 << 8) /* transmits slot 12 */
-#define TXCR_TX7 (1 << 7) /* transmits slot 12 */
-#define TXCR_TX6 (1 << 6) /* transmits slot 12 */
-#define TXCR_TX5 (1 << 5) /* transmits slot 12 */
-#define TXCR_TX4 (1 << 4) /* transmits slot 12 */
-#define TXCR_TX3 (1 << 3) /* transmits slot 12 */
-#define TXCR_TX2 (1 << 2) /* transmits slot 12 */
-#define TXCR_TX1 (1 << 1) /* transmits slot 12 */
-#define TXCR_TXEN (1 << 0) /* transmit enable */
+#define CR_FEN (1 << 16) /* fifo enable */
+#define CR_COMPACT (1 << 15) /* compact mode */
+#define CR_SZ16 (0 << 13) /* 16 bits */
+#define CR_SZ18 (1 << 13) /* 18 bits */
+#define CR_SZ20 (2 << 13) /* 20 bits */
+#define CR_SZ12 (3 << 13) /* 12 bits */
+#define CR_SL12 (1 << 12)
+#define CR_SL11 (1 << 11)
+#define CR_SL10 (1 << 10)
+#define CR_SL9 (1 << 9)
+#define CR_SL8 (1 << 8)
+#define CR_SL7 (1 << 7)
+#define CR_SL6 (1 << 6)
+#define CR_SL5 (1 << 5)
+#define CR_SL4 (1 << 4)
+#define CR_SL3 (1 << 3)
+#define CR_SL2 (1 << 2)
+#define CR_SL1 (1 << 1)
+#define CR_EN (1 << 0) /* transmit enable */
/*
* status register bits. P49
/* AC'97 */
struct mutex ac97_sem;
struct snd_ac97_bus *ac97_bus;
+ struct snd_ac97 *ac97;
u32 maincr;
spinlock_t lock;
git://bbs.cooldavid.org / net-next-2.6.git / commitdiff