[PATCH] dvb: LGDT3302 QAM256 initialization fix

- Initialize all non mutually exclusive variables
  without regard to the mode selected.
- Do a software reset each time the parameters are
  set, regardless of whether anything changes.
  This may allow an application to recover from a
  hung condition.
- Improved error reporting.
- Removed $Id:$

Signed-off-by: Mac Michaels <wmichaels1@earthlink.net>
Signed-off-by: Michael Krufky <mkrufky@m1k.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

diff --git a/drivers/media/dvb/frontends/lgdt3302.c b/drivers/media/dvb/frontends/lgdt3302.c
index 09c914256e49e2e958650e55543fec5eefcec901..2eea03d218cd1d5cb5abe5dae982ec2f452692a0 100644 (file)
--- a/drivers/media/dvb/frontends/lgdt3302.c
+++ b/drivers/media/dvb/frontends/lgdt3302.c
@@ -1,6 +1,4 @@
 /*
- * $Id: lgdt3302.c,v 1.5 2005/07/07 03:47:15 mkrufky Exp $
- *
  *    Support for LGDT3302 (DViCO FustionHDTV 3 Gold) - VSB/QAM
  *
  *    Copyright (C) 2005 Wilson Michaels <wilsonmichaels@earthlink.net>
@@ -83,7 +81,10 @@ static int i2c_writebytes (struct lgdt3302_state* state,
 
                if ((err = i2c_transfer(state->i2c, &msg, 1)) != 1) {
                        printk(KERN_WARNING "lgdt3302: %s error (addr %02x <- %02x, err == %i)\n", __FUNCTION__, addr, buf[0], err);
-                       return -EREMOTEIO;
+                       if (err < 0)
+                               return err;
+                       else
+                               return -EREMOTEIO;
                }
        } else {
                u8 tmp[] = { buf[0], buf[1] };
@@ -96,7 +97,10 @@ static int i2c_writebytes (struct lgdt3302_state* state,
                        tmp[1] = buf[i];
                        if ((err = i2c_transfer(state->i2c, &msg, 1)) != 1) {
                                printk(KERN_WARNING "lgdt3302: %s error (addr %02x <- %02x, err == %i)\n", __FUNCTION__, addr, buf[0], err);
-                               return -EREMOTEIO;
+                               if (err < 0)
+                                       return err;
+                               else
+                                       return -EREMOTEIO;
                        }
                        tmp[0]++;
                }
@@ -218,6 +222,8 @@ static int lgdt3302_set_parameters(struct dvb_frontend* fe,
 
        /* Change only if we are actually changing the modulation */
        if (state->current_modulation != param->u.vsb.modulation) {
+               int value;
+
                switch(param->u.vsb.modulation) {
                case VSB_8:
                        dprintk("%s: VSB_8 MODE\n", __FUNCTION__);
@@ -266,36 +272,29 @@ static int lgdt3302_set_parameters(struct dvb_frontend* fe,
                i2c_writebytes(state, state->config->demod_address,
                               demux_ctrl_cfg, sizeof(demux_ctrl_cfg));
 
-               if (param->u.vsb.modulation == VSB_8) {
-                       /* Initialization for VSB modes only */
-                       /* Change the value of NCOCTFV[25:0]of carrier
-                          recovery center frequency register for VSB */
-                       i2c_writebytes(state, state->config->demod_address,
+               /* Change the value of NCOCTFV[25:0] of carrier
+                  recovery center frequency register */
+               i2c_writebytes(state, state->config->demod_address,
                                       vsb_freq_cfg, sizeof(vsb_freq_cfg));
-               } else {
-                       /* Initialization for QAM modes only */
-                       /* Set the value of 'INLVTHD' register 0x2a/0x2c
-                          to value from 'IFACC' register 0x39/0x3b -1 */
-                       int value;
-                       i2c_selectreadbytes(state, AGC_RFIF_ACC0,
-                                           &agc_delay_cfg[1], 3);
-                       value = ((agc_delay_cfg[1] & 0x0f) << 8) | agc_delay_cfg[3];
-                       value = value -1;
-                       dprintk("%s IFACC -1 = 0x%03x\n", __FUNCTION__, value);
-                       agc_delay_cfg[1] = (value >> 8) & 0x0f;
-                       agc_delay_cfg[2] = 0x00;
-                       agc_delay_cfg[3] = value & 0xff;
-                       i2c_writebytes(state, state->config->demod_address,
-                                      agc_delay_cfg, sizeof(agc_delay_cfg));
-
-                       /* Change the value of IAGCBW[15:8]
-                          of inner AGC loop filter bandwith */
-                       i2c_writebytes(state, state->config->demod_address,
-                                      agc_loop_cfg, sizeof(agc_loop_cfg));
-               }
+               /* Set the value of 'INLVTHD' register 0x2a/0x2c
+                  to value from 'IFACC' register 0x39/0x3b -1 */
+               i2c_selectreadbytes(state, AGC_RFIF_ACC0,
+                                   &agc_delay_cfg[1], 3);
+               value = ((agc_delay_cfg[1] & 0x0f) << 8) | agc_delay_cfg[3];
+               value = value -1;
+               dprintk("%s IFACC -1 = 0x%03x\n", __FUNCTION__, value);
+               agc_delay_cfg[1] = (value >> 8) & 0x0f;
+               agc_delay_cfg[2] = 0x00;
+               agc_delay_cfg[3] = value & 0xff;
+               i2c_writebytes(state, state->config->demod_address,
+                              agc_delay_cfg, sizeof(agc_delay_cfg));
+
+               /* Change the value of IAGCBW[15:8]
+                  of inner AGC loop filter bandwith */
+               i2c_writebytes(state, state->config->demod_address,
+                              agc_loop_cfg, sizeof(agc_loop_cfg));
 
                state->config->set_ts_params(fe, 0);
-               lgdt3302_SwReset(state);
                state->current_modulation = param->u.vsb.modulation;
        }
 
@@ -311,11 +310,10 @@ static int lgdt3302_set_parameters(struct dvb_frontend* fe,
                i2c_readbytes(state, state->config->pll_address, buf, 1);
                dprintk("%s: tuner status byte = 0x%02x\n", __FUNCTION__, buf[0]);
 
-               lgdt3302_SwReset(state);
-
                /* Update current frequency */
                state->current_frequency = param->frequency;
        }
+       lgdt3302_SwReset(state);
        return 0;
 }