microblaze_v8: Kconfig patches

Reviewed-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Acked-by: John Linn <john.linn@xilinx.com>
Acked-by: Stephen Neuendorffer <stephen.neuendorffer@xilinx.com>
Acked-by: John Williams <john.williams@petalogix.com>
Signed-off-by: Michal Simek <monstr@monstr.eu>

diff --git a/arch/microblaze/Kconfig b/arch/microblaze/Kconfig
new file mode 100644 (file)
index 0000000..8cc312b
--- /dev/null
+++ b/arch/microblaze/Kconfig
@@ -0,0 +1,141 @@
+# For a description of the syntax of this configuration file,
+# see Documentation/kbuild/kconfig-language.txt.
+
+mainmenu "Linux/Microblaze Kernel Configuration"
+
+config MICROBLAZE
+       def_bool y
+       select HAVE_LMB
+
+config SWAP
+       def_bool n
+
+config RWSEM_GENERIC_SPINLOCK
+       def_bool y
+
+config RWSEM_XCHGADD_ALGORITHM
+       bool
+
+config ARCH_HAS_ILOG2_U32
+       def_bool n
+
+config ARCH_HAS_ILOG2_U64
+       def_bool n
+
+config GENERIC_FIND_NEXT_BIT
+       def_bool y
+
+config GENERIC_HWEIGHT
+       def_bool y
+
+config GENERIC_HARDIRQS
+       def_bool y
+
+config GENERIC_IRQ_PROBE
+       def_bool y
+
+config GENERIC_CALIBRATE_DELAY
+       def_bool y
+
+config GENERIC_TIME
+       def_bool y
+
+config GENERIC_TIME_VSYSCALL
+       def_bool n
+
+config GENERIC_CLOCKEVENTS
+       def_bool y
+
+config GENERIC_HARDIRQS_NO__DO_IRQ
+       def_bool y
+
+config PCI
+       depends on !MMU
+       def_bool n
+
+config NO_DMA
+       depends on !MMU
+       def_bool n
+
+source "init/Kconfig"
+
+source "kernel/Kconfig.freezer"
+
+source "arch/microblaze/platform/Kconfig.platform"
+
+menu "Processor type and features"
+
+source kernel/time/Kconfig
+
+source "kernel/Kconfig.preempt"
+
+source "kernel/Kconfig.hz"
+
+config MMU
+       def_bool n
+
+config NO_MMU
+       bool
+       depends on !MMU
+       default y
+
+comment "Boot options"
+
+config CMDLINE_BOOL
+       bool "Default bootloader kernel arguments"
+
+config CMDLINE
+       string "Default kernel command string"
+       depends on CMDLINE_BOOL
+       default "console=ttyUL0,115200"
+       help
+         On some architectures there is currently no way for the boot loader
+         to pass arguments to the kernel. For these architectures, you should
+         supply some command-line options at build time by entering them
+         here.
+
+config CMDLINE_FORCE
+       bool "Force default kernel command string"
+       depends on CMDLINE_BOOL
+       default n
+       help
+         Set this to have arguments from the default kernel command string
+         override those passed by the boot loader.
+
+config OF
+       def_bool y
+
+config OF_DEVICE
+       def_bool y
+
+config PROC_DEVICETREE
+       bool "Support for device tree in /proc"
+       depends on PROC_FS
+       help
+         This option adds a device-tree directory under /proc which contains
+         an image of the device tree that the kernel copies from Open
+         Firmware or other boot firmware. If unsure, say Y here.
+
+endmenu
+
+source "mm/Kconfig"
+
+menu "Exectuable file formats"
+
+source "fs/Kconfig.binfmt"
+
+endmenu
+
+source "net/Kconfig"
+
+source "drivers/Kconfig"
+
+source "fs/Kconfig"
+
+source "arch/microblaze/Kconfig.debug"
+
+source "security/Kconfig"
+
+source "crypto/Kconfig"
+
+source "lib/Kconfig"

diff --git a/arch/microblaze/Kconfig.debug b/arch/microblaze/Kconfig.debug
new file mode 100644 (file)
index 0000000..242cd35
--- /dev/null
+++ b/arch/microblaze/Kconfig.debug
@@ -0,0 +1,26 @@
+# For a description of the syntax of this configuration file,
+# see Documentation/kbuild/kconfig-language.txt.
+
+menu "Kernel hacking"
+
+source "lib/Kconfig.debug"
+
+config EARLY_PRINTK
+       bool "Early printk function for kernel"
+       default n
+       help
+         This option turns on/off early printk messages to console.
+         First Uartlite node is taken.
+
+config HEART_BEAT
+       bool "Heart beat function for kernel"
+       default n
+       help
+         This option turns on/off heart beat kernel functionality.
+         First GPIO node is taken.
+
+config DEBUG_BOOTMEM
+       depends on DEBUG_KERNEL
+       bool "Debug BOOTMEM initialization"
+
+endmenu

diff --git a/arch/microblaze/platform/Kconfig.platform b/arch/microblaze/platform/Kconfig.platform
new file mode 100644 (file)
index 0000000..8e9b475
--- /dev/null
+++ b/arch/microblaze/platform/Kconfig.platform
@@ -0,0 +1,85 @@
+# For a description of the syntax of this configuration file,
+# see Documentation/kbuild/kconfig-language.txt.
+#
+# Platform selection Kconfig menu for MicroBlaze targets
+#
+
+menu "Platform options"
+choice
+       prompt "Platform"
+       default PLATFORM_MICROBLAZE_AUTO
+       help
+         Choose which hardware board/platform you are targeting.
+
+config PLATFORM_GENERIC
+       bool "Generic"
+       help
+         Choose this option for the Generic platform.
+
+endchoice
+
+config SELFMOD
+       bool "Use self modified code for intc/timer"
+       depends on EXPERIMENTAL && NO_MMU
+       default n
+       help
+         This choice enables self-modified code for interrupt controller
+         and timer.
+
+config SELFMOD_INTC
+       bool "Use self modified code for intc"
+       depends on SELFMOD
+       default y
+       help
+         This choice enables self-modified code for interrupt controller.
+
+config SELFMOD_TIMER
+       bool "Use self modified code for timer"
+       depends on SELFMOD
+       default y
+       help
+         This choice enables self-modified code for timer.
+
+config OPT_LIB_FUNCTION
+       bool "Optimalized lib function"
+       default y
+       help
+         Allows turn on optimalized library function (memcpy and memmove).
+         They are optimized by using word alignment. This will work
+         fine if both source and destination are aligned on the same
+         boundary. However, if they are aligned on different boundaries
+         shifts will be necessary. This might result in bad performance
+         on MicroBlaze systems without a barrel shifter.
+
+config OPT_LIB_ASM
+       bool "Optimalized lib function ASM"
+       depends on OPT_LIB_FUNCTION
+       default n
+       help
+         Allows turn on optimalized library function (memcpy and memmove).
+         Function are written in asm code.
+
+# This is still a bit broken - disabling for now JW 20070504
+config ALLOW_EDIT_AUTO
+       bool "Permit Display/edit of Kconfig.auto platform settings"
+       default n
+       help
+         Allows the editing of auto-generated platform settings from
+         the Kconfig.auto file. Obviously this does not change the
+         underlying hardware, so be very careful if you go editing
+         these settings.
+
+         Also, if you enable this, and edit various Kconfig.auto
+         settings, YOUR CHANGES WILL BE LOST if you then disable it
+         again. You have been warned!
+
+         If unsure, say no.
+
+comment "Automatic platform settings from Kconfig.auto"
+       depends on ALLOW_EDIT_AUTO
+
+if PLATFORM_GENERIC=y
+       source "arch/microblaze/platform/generic/Kconfig.auto"
+endif
+
+endmenu

diff --git a/arch/microblaze/platform/generic/Kconfig.auto b/arch/microblaze/platform/generic/Kconfig.auto
new file mode 100644 (file)
index 0000000..fbca22d
--- /dev/null
+++ b/arch/microblaze/platform/generic/Kconfig.auto
@@ -0,0 +1,62 @@
+#
+# (C) Copyright 2007 Michal Simek
+#
+# Michal SIMEK <monstr@monstr.eu>
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+# Definitions for MICROBLAZE0
+comment "Definitions for MICROBLAZE0"
+       depends on ALLOW_EDIT_AUTO
+
+config KERNEL_BASE_ADDR
+       hex "Physical address where Linux Kernel is"
+       default "0x90000000"
+       help
+         BASE Address for kernel
+
+config XILINX_MICROBLAZE0_FAMILY
+       string "Targetted FPGA family" if ALLOW_EDIT_AUTO
+       default "virtex5"
+
+config XILINX_MICROBLAZE0_USE_MSR_INSTR
+       int "USE_MSR_INSTR range (0:1)" if ALLOW_EDIT_AUTO
+       default 1
+
+config XILINX_MICROBLAZE0_USE_PCMP_INSTR
+       int "USE_PCMP_INSTR range (0:1)" if ALLOW_EDIT_AUTO
+       default 1
+
+config XILINX_MICROBLAZE0_USE_BARREL
+       int "USE_BARREL range (0:1)" if ALLOW_EDIT_AUTO
+       default 1
+
+config XILINX_MICROBLAZE0_USE_DIV
+       int "USE_DIV range (0:1)" if ALLOW_EDIT_AUTO
+       default 1
+
+config XILINX_MICROBLAZE0_USE_HW_MUL
+       int "USE_HW_MUL values (0=NONE, 1=MUL32, 2=MUL64)" if ALLOW_EDIT_AUTO
+       default 2
+
+config XILINX_MICROBLAZE0_USE_FPU
+       int "USE_FPU values (0=NONE, 1=BASIC, 2=EXTENDED)" if ALLOW_EDIT_AUTO
+       default 2
+
+config XILINX_MICROBLAZE0_HW_VER
+       string "Core version number" if ALLOW_EDIT_AUTO
+       default 7.10.d