--- /dev/null
+/*
+ * linux/arch/arm/mach-pxa/income.c
+ *
+ * Support for Income s.r.o. SH-Dmaster PXA270 SBC
+ *
+ * Copyright (C) 2010
+ * Marek Vasut <marek.vasut@gmail.com>
+ * Pavel Revak <palo@bielyvlk.sk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/bitops.h>
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/pwm_backlight.h>
+#include <linux/sysdev.h>
+
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+#include <mach/hardware.h>
+#include <mach/mmc.h>
+#include <mach/ohci.h>
+#include <mach/pxa27x.h>
+#include <mach/pxa27x-udc.h>
+#include <mach/pxafb.h>
+
+#include <plat/i2c.h>
+
+#include "devices.h"
+#include "generic.h"
+
+#define GPIO114_INCOME_ETH_IRQ (114)
+#define GPIO0_INCOME_SD_DETECT (0)
+#define GPIO0_INCOME_SD_RO (1)
+#define GPIO54_INCOME_LED_A (54)
+#define GPIO55_INCOME_LED_B (55)
+#define GPIO113_INCOME_TS_IRQ (113)
+
+/******************************************************************************
+ * Pin configuration
+ ******************************************************************************/
+static mfp_cfg_t income_pin_config[] __initdata = {
+ /* MMC */
+ GPIO32_MMC_CLK,
+ GPIO92_MMC_DAT_0,
+ GPIO109_MMC_DAT_1,
+ GPIO110_MMC_DAT_2,
+ GPIO111_MMC_DAT_3,
+ GPIO112_MMC_CMD,
+ GPIO0_GPIO, /* SD detect */
+ GPIO1_GPIO, /* SD read-only */
+
+ /* FFUART */
+ GPIO39_FFUART_TXD,
+ GPIO34_FFUART_RXD,
+
+ /* BFUART */
+ GPIO42_BTUART_RXD,
+ GPIO43_BTUART_TXD,
+ GPIO45_BTUART_RTS,
+
+ /* STUART */
+ GPIO46_STUART_RXD,
+ GPIO47_STUART_TXD,
+
+ /* UHC */
+ GPIO88_USBH1_PWR,
+ GPIO89_USBH1_PEN,
+
+ /* LCD */
+ GPIOxx_LCD_TFT_16BPP,
+
+ /* PWM */
+ GPIO16_PWM0_OUT,
+
+ /* I2C */
+ GPIO117_I2C_SCL,
+ GPIO118_I2C_SDA,
+
+ /* LED */
+ GPIO54_GPIO, /* LED A */
+ GPIO55_GPIO, /* LED B */
+};
+
+/******************************************************************************
+ * SD/MMC card controller
+ ******************************************************************************/
+#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
+static struct pxamci_platform_data income_mci_platform_data = {
+ .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
+ .gpio_power = -1,
+ .gpio_card_detect = GPIO0_INCOME_SD_DETECT,
+ .gpio_card_ro = GPIO0_INCOME_SD_RO,
+ .detect_delay_ms = 200,
+};
+
+static void __init income_mmc_init(void)
+{
+ pxa_set_mci_info(&income_mci_platform_data);
+}
+#else
+static inline void income_mmc_init(void) {}
+#endif
+
+/******************************************************************************
+ * USB Host
+ ******************************************************************************/
+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+static struct pxaohci_platform_data income_ohci_info = {
+ .port_mode = PMM_PERPORT_MODE,
+ .flags = ENABLE_PORT1 | POWER_CONTROL_LOW | POWER_SENSE_LOW,
+};
+
+static void __init income_uhc_init(void)
+{
+ pxa_set_ohci_info(&income_ohci_info);
+}
+#else
+static inline void income_uhc_init(void) {}
+#endif
+
+/******************************************************************************
+ * LED
+ ******************************************************************************/
+#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
+struct gpio_led income_gpio_leds[] = {
+ {
+ .name = "income:green:leda",
+ .default_trigger = "none",
+ .gpio = GPIO54_INCOME_LED_A,
+ .active_low = 1,
+ },
+ {
+ .name = "income:green:ledb",
+ .default_trigger = "none",
+ .gpio = GPIO55_INCOME_LED_B,
+ .active_low = 1,
+ }
+};
+
+static struct gpio_led_platform_data income_gpio_led_info = {
+ .leds = income_gpio_leds,
+ .num_leds = ARRAY_SIZE(income_gpio_leds),
+};
+
+static struct platform_device income_leds = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &income_gpio_led_info,
+ }
+};
+
+static void __init income_led_init(void)
+{
+ platform_device_register(&income_leds);
+}
+#else
+static inline void income_led_init(void) {}
+#endif
+
+/******************************************************************************
+ * I2C
+ ******************************************************************************/
+#if defined(CONFIG_I2C_PXA) || defined(CONFIG_I2C_PXA_MODULE)
+static struct i2c_board_info __initdata income_i2c_devs[] = {
+ {
+ I2C_BOARD_INFO("ds1340", 0x68),
+ }, {
+ I2C_BOARD_INFO("lm75", 0x4f),
+ },
+};
+
+static void __init income_i2c_init(void)
+{
+ pxa_set_i2c_info(NULL);
+ pxa27x_set_i2c_power_info(NULL);
+ i2c_register_board_info(0, ARRAY_AND_SIZE(income_i2c_devs));
+}
+#else
+static inline void income_i2c_init(void) {}
+#endif
+
+/******************************************************************************
+ * Framebuffer
+ ******************************************************************************/
+#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
+static struct pxafb_mode_info income_lcd_modes[] = {
+{
+ .pixclock = 144700,
+ .xres = 320,
+ .yres = 240,
+ .bpp = 32,
+ .depth = 18,
+
+ .left_margin = 10,
+ .right_margin = 10,
+ .upper_margin = 7,
+ .lower_margin = 8,
+
+ .hsync_len = 20,
+ .vsync_len = 2,
+
+ .sync = FB_SYNC_VERT_HIGH_ACT,
+},
+};
+
+static struct pxafb_mach_info income_lcd_screen = {
+ .modes = income_lcd_modes,
+ .num_modes = ARRAY_SIZE(income_lcd_modes),
+ .lcd_conn = LCD_COLOR_TFT_18BPP | LCD_PCLK_EDGE_FALL,
+};
+
+static void __init income_lcd_init(void)
+{
+ set_pxa_fb_info(&income_lcd_screen);
+}
+#else
+static inline void income_lcd_init(void) {}
+#endif
+
+/******************************************************************************
+ * Backlight
+ ******************************************************************************/
+#if defined(CONFIG_BACKLIGHT_PWM) || defined(CONFIG_BACKLIGHT_PWM__MODULE)
+static struct platform_pwm_backlight_data income_backlight_data = {
+ .pwm_id = 0,
+ .max_brightness = 0x3ff,
+ .dft_brightness = 0x1ff,
+ .pwm_period_ns = 1000000,
+};
+
+static struct platform_device income_backlight = {
+ .name = "pwm-backlight",
+ .dev = {
+ .parent = &pxa27x_device_pwm0.dev,
+ .platform_data = &income_backlight_data,
+ },
+};
+
+static void __init income_pwm_init(void)
+{
+ platform_device_register(&income_backlight);
+}
+#else
+static inline void income_pwm_init(void) {}
+#endif
+
+void __init colibri_pxa270_income_boardinit(void)
+{
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(income_pin_config));
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
+
+ income_mmc_init();
+ income_uhc_init();
+ income_led_init();
+ income_i2c_init();
+ income_lcd_init();
+ income_pwm_init();
+}
+
******************************************************************************/
#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
static struct resource colibri_pxa270_dm9000_resources[] = {
- [0] = {
+ {
.start = PXA_CS2_PHYS,
.end = PXA_CS2_PHYS + 3,
.flags = IORESOURCE_MEM,
},
- [1] = {
+ {
.start = PXA_CS2_PHYS + 4,
.end = PXA_CS2_PHYS + 4 + 500,
.flags = IORESOURCE_MEM,
},
- [2] = {
+ {
.start = gpio_to_irq(GPIO114_COLIBRI_PXA270_ETH_IRQ),
.end = gpio_to_irq(GPIO114_COLIBRI_PXA270_ETH_IRQ),
.flags = IORESOURCE_IRQ | IRQF_TRIGGER_RISING,
case COLIBRI_PXA270_EVALBOARD:
colibri_pxa270_evalboard_init();
break;
+ case COLIBRI_PXA270_INCOME:
+ colibri_pxa270_income_boardinit();
+ break;
default:
printk(KERN_ERR "Illegal colibri_pxa270_baseboard type %d\n",
colibri_pxa270_baseboard);
}
}
+/* The "Income s.r.o. SH-Dmaster PXA270 SBC" board can be booted either
+ * with the INCOME mach type or with COLIBRI and the kernel parameter
+ * "colibri_pxa270_baseboard=1"
+ */
+static void __init colibri_pxa270_income_init(void)
+{
+ colibri_pxa270_baseboard = COLIBRI_PXA270_INCOME;
+ colibri_pxa270_init();
+}
+
MACHINE_START(COLIBRI, "Toradex Colibri PXA270")
.phys_io = 0x40000000,
.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
.timer = &pxa_timer,
MACHINE_END
+MACHINE_START(INCOME, "Income s.r.o. SH-Dmaster PXA270 SBC")
+ .phys_io = 0x40000000,
+ .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
+ .boot_params = 0xa0000100,
+ .init_machine = colibri_pxa270_income_init,
+ .map_io = pxa_map_io,
+ .init_irq = pxa27x_init_irq,
+ .timer = &pxa_timer,
+MACHINE_END
+
git://bbs.cooldavid.org / net-next-2.6.git / commitdiff