drivers/staging/rt2870/common/rtusb_bulk.c:45: ERROR: that open brace { should be on the previous line
drivers/staging/rt2870/common/rtusb_bulk.c:175: ERROR: space required before the open parenthesis '('
drivers/staging/rt2870/common/rtusb_bulk.c:179: ERROR: space required before the open parenthesis '('
drivers/staging/rt2870/common/rtusb_bulk.c:190: ERROR: "foo * bar" should be "foo *bar"
drivers/staging/rt2870/common/rtusb_bulk.c:276: ERROR: space prohibited after that '&' (ctx:VxW)
drivers/staging/rt2870/common/rtusb_bulk.c:278: ERROR: space prohibited after that '&' (ctx:WxW)
drivers/staging/rt2870/common/rtusb_bulk.c:313: ERROR: space prohibited before that close parenthesis ')'
drivers/staging/rt2870/common/rtusb_bulk.c:329: WARNING: __func__ should be used instead of gcc specific __FUNCTION__
drivers/staging/rt2870/common/rtusb_bulk.c:337: ERROR: space prohibited after that '&' (ctx:VxW)
drivers/staging/rt2870/common/rtusb_bulk.c:404: WARNING: braces {} are not necessary for single statement blocks
drivers/staging/rt2870/common/rtusb_bulk.c:952: WARNING: braces {} are not necessary for single statement blocks
drivers/staging/rt2870/common/rtusb_bulk.c:1017: WARNING: braces {} are not necessary for single statement blocks
Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
*/
#define BULK_OUT_LOCK(pLock, IrqFlags) \
*/
#define BULK_OUT_LOCK(pLock, IrqFlags) \
- if(1 /*!(in_interrupt() & 0xffff0000)*/) \
+ if (1 /*!(in_interrupt() & 0xffff0000)*/) \
RTMP_IRQ_LOCK((pLock), IrqFlags);
#define BULK_OUT_UNLOCK(pLock, IrqFlags) \
RTMP_IRQ_LOCK((pLock), IrqFlags);
#define BULK_OUT_UNLOCK(pLock, IrqFlags) \
- if(1 /*!(in_interrupt() & 0xffff0000)*/) \
+ if (1 /*!(in_interrupt() & 0xffff0000)*/) \
RTMP_IRQ_UNLOCK((pLock), IrqFlags);
void RTUSBBulkOutDataPacket(struct rt_rtmp_adapter *pAd,
RTMP_IRQ_UNLOCK((pLock), IrqFlags);
void RTUSBBulkOutDataPacket(struct rt_rtmp_adapter *pAd,
PURB pUrb;
int ret = 0;
struct rt_txinfo *pTxInfo, *pLastTxInfo = NULL;
PURB pUrb;
int ret = 0;
struct rt_txinfo *pTxInfo, *pLastTxInfo = NULL;
- struct rt_txwi * pTxWI;
unsigned long TmpBulkEndPos, ThisBulkSize;
unsigned long IrqFlags = 0, IrqFlags2 = 0;
u8 *pWirelessPkt, *pAppendant;
unsigned long TmpBulkEndPos, ThisBulkSize;
unsigned long IrqFlags = 0, IrqFlags2 = 0;
u8 *pWirelessPkt, *pAppendant;
- pTxInfo = (struct rt_txinfo *)& pWirelessPkt[TmpBulkEndPos];
+ pTxInfo = (struct rt_txinfo *)&pWirelessPkt[TmpBulkEndPos];
- (struct rt_txwi *) & pWirelessPkt[TmpBulkEndPos + TXINFO_SIZE];
+ (struct rt_txwi *)&pWirelessPkt[TmpBulkEndPos + TXINFO_SIZE];
if (pAd->bForcePrintTX == TRUE)
DBGPRINT(RT_DEBUG_TRACE,
if (pAd->bForcePrintTX == TRUE)
DBGPRINT(RT_DEBUG_TRACE,
pHTTXContext->ENextBulkOutPosition =
TmpBulkEndPos;
break;
pHTTXContext->ENextBulkOutPosition =
TmpBulkEndPos;
break;
- } else if (((pAd->BulkOutMaxPacketSize < 512) && ((ThisBulkSize & 0xfffff800) != 0)) /*|| ( (ThisBulkSize != 0) && (pTxWI->AMPDU == 0)) */ ) { /* For USB 1.1 or peer which didn't support AMPDU, limit the BulkOut size. */
+ } else if (((pAd->BulkOutMaxPacketSize < 512) && ((ThisBulkSize & 0xfffff800) != 0)) /*|| ( (ThisBulkSize != 0) && (pTxWI->AMPDU == 0)) */) { /* For USB 1.1 or peer which didn't support AMPDU, limit the BulkOut size. */
/* For performence in b/g mode, now just check for USB 1.1 and didn't care about the APMDU or not! 2008/06/04. */
pHTTXContext->ENextBulkOutPosition =
TmpBulkEndPos;
/* For performence in b/g mode, now just check for USB 1.1 and didn't care about the APMDU or not! 2008/06/04. */
pHTTXContext->ENextBulkOutPosition =
TmpBulkEndPos;
if (pTxInfo->QSEL != FIFO_EDCA) {
DBGPRINT(RT_DEBUG_ERROR,
("%s(): ====> pTxInfo->QueueSel(%d)!= FIFO_EDCA!!!!\n",
if (pTxInfo->QSEL != FIFO_EDCA) {
DBGPRINT(RT_DEBUG_ERROR,
("%s(): ====> pTxInfo->QueueSel(%d)!= FIFO_EDCA!!!!\n",
- __FUNCTION__, pTxInfo->QSEL));
+ __func__, pTxInfo->QSEL));
DBGPRINT(RT_DEBUG_ERROR,
("\tCWPos=%ld, NBPos=%ld, ENBPos=%ld, bCopy=%d!\n",
pHTTXContext->CurWritePosition,
DBGPRINT(RT_DEBUG_ERROR,
("\tCWPos=%ld, NBPos=%ld, ENBPos=%ld, bCopy=%d!\n",
pHTTXContext->CurWritePosition,
pHTTXContext->ENextBulkOutPosition,
pHTTXContext->bCopySavePad));
hex_dump("Wrong QSel Pkt:",
pHTTXContext->ENextBulkOutPosition,
pHTTXContext->bCopySavePad));
hex_dump("Wrong QSel Pkt:",
- (u8 *)& pWirelessPkt[TmpBulkEndPos],
+ (u8 *)&pWirelessPkt[TmpBulkEndPos],
(pHTTXContext->CurWritePosition -
pHTTXContext->NextBulkOutPosition));
}
(pHTTXContext->CurWritePosition -
pHTTXContext->NextBulkOutPosition));
}
} while (TRUE);
/* adjust the pTxInfo->USBDMANextVLD value of last pTxInfo. */
} while (TRUE);
/* adjust the pTxInfo->USBDMANextVLD value of last pTxInfo. */
pLastTxInfo->USBDMANextVLD = 0;
pLastTxInfo->USBDMANextVLD = 0;
/*
We need to copy SavedPad when following condition matched!
/*
We need to copy SavedPad when following condition matched!
if (!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NEED_STOP_TX)
) {
/* 2. PS-Poll frame is next */
if (!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NEED_STOP_TX)
) {
/* 2. PS-Poll frame is next */
- if (RTUSB_TEST_BULK_FLAG(pAd, fRTUSB_BULK_OUT_PSPOLL)) {
+ if (RTUSB_TEST_BULK_FLAG(pAd, fRTUSB_BULK_OUT_PSPOLL))
/* 5. Mlme frame is next */
else if ((RTUSB_TEST_BULK_FLAG(pAd, fRTUSB_BULK_OUT_MLME)) ||
(pAd->MgmtRing.TxSwFreeIdx < MGMT_RING_SIZE)) {
/* 5. Mlme frame is next */
else if ((RTUSB_TEST_BULK_FLAG(pAd, fRTUSB_BULK_OUT_MLME)) ||
(pAd->MgmtRing.TxSwFreeIdx < MGMT_RING_SIZE)) {
}
}
/* 8. No data avaliable */
}
}
/* 8. No data avaliable */