-/* the min and max PCI bus speed in MHz - from datasheet */
-#define CY82C963_MIN_BUS_SPEED 25
-#define CY82C963_MAX_BUS_SPEED 33
-
-/* the struct for the PIO mode timings */
-typedef struct pio_clocks_s {
- u8 address_time; /* Address setup (clocks) */
- u8 time_16r; /* clocks for 16bit IOR (0xF0=Active/data, 0x0F=Recovery) */
- u8 time_16w; /* clocks for 16bit IOW (0xF0=Active/data, 0x0F=Recovery) */
- u8 time_8; /* clocks for 8bit (0xF0=Active/data, 0x0F=Recovery) */
-} pio_clocks_t;
-
-/*
- * calc clocks using bus_speed
- * returns (rounded up) time in bus clocks for time in ns
- */
-static int calc_clk(int time, int bus_speed)
-{
- int clocks;
-
- clocks = (time*bus_speed+999)/1000 - 1;
-
- if (clocks < 0)
- clocks = 0;
-
- if (clocks > 0x0F)
- clocks = 0x0F;
-
- return clocks;
-}
-
-/*
- * compute the values for the clock registers for PIO
- * mode and pci_clk [MHz] speed
- *
- * NOTE: for mode 0,1 and 2 drives 8-bit IDE command control registers are used
- * for mode 3 and 4 drives 8 and 16-bit timings are the same
- *
- */
-static void compute_clocks(u8 pio, pio_clocks_t *p_pclk)
-{
- struct ide_timing *t = ide_timing_find_mode(XFER_PIO_0 + pio);
- int clk1, clk2;
- int bus_speed = ide_pci_clk ? ide_pci_clk : 33;
-
- /* we don't check against CY82C693's min and max speed,
- * so you can play with the idebus=xx parameter
- */
-
- /* let's calc the address setup time clocks */
- p_pclk->address_time = (u8)calc_clk(t->setup, bus_speed);
-
- /* let's calc the active and recovery time clocks */
- clk1 = calc_clk(t->active, bus_speed);
-
- /* calc recovery timing */
- clk2 = t->cycle - t->active - t->setup;
-
- clk2 = calc_clk(clk2, bus_speed);
-
- clk1 = (clk1<<4)|clk2; /* combine active and recovery clocks */
-
- /* note: we use the same values for 16bit IOR and IOW
- * those are all the same, since I don't have other
- * timings than those from ide-lib.c
- */
-
- p_pclk->time_16r = (u8)clk1;
- p_pclk->time_16w = (u8)clk1;
-
- /* what are good values for 8bit ?? */
- p_pclk->time_8 = (u8)clk1;
-}
-