X-Git-Url: https://bbs.cooldavid.org/git/?a=blobdiff_plain;f=jme.h;h=a3d0f246a1221467654511586eb19a426c6e544a;hb=e021d63c8df1bbbb70e6d729a4148ff7a6b9138c;hp=a2402407e783ff3b6f0213454def1f74d4867dec;hpb=5141719b9c30681a881413c07bf9d7b7dd76f238;p=jme.git

diff --git a/jme.h b/jme.h
index a240240..a3d0f24 100644
--- a/jme.h
+++ b/jme.h
@@ -118,6 +118,15 @@ do {									\
 
 #if LINUX_VERSION_CODE >= KERNEL_VERSION(3,1,0)
 #define __UNIFY_VLAN_RX_PATH__
+#define __USE_NDO_SET_RX_MODE__
+#endif
+
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(3,2,0)
+#define __USE_SKB_FRAG_API__
+#endif
+
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(3,3,0)
+#define __NEW_FIX_FEATURES_TYPE__
 #endif
 
 /*
@@ -168,7 +177,6 @@ enum jme_spi_op_bits {
 };
 
 #define HALF_US 500	/* 500 ns */
-#define JMESPIIOCTL	SIOCDEVPRIVATE
 
 #define PCI_PRIV_PE1		0xE4
 
@@ -936,6 +944,25 @@ enum jme_rxmcs_bits {
 				  RXMCS_CHECKSUM,
 };
 
+/*	Extern PHY common register 2	*/
+
+#define PHY_GAD_TEST_MODE_1			0x00002000
+#define PHY_GAD_TEST_MODE_MSK			0x0000E000
+#define JM_PHY_SPEC_REG_READ			0x00004000
+#define JM_PHY_SPEC_REG_WRITE			0x00008000
+#define PHY_CALIBRATION_DELAY			20
+#define JM_PHY_SPEC_ADDR_REG			0x1E
+#define JM_PHY_SPEC_DATA_REG			0x1F
+
+#define JM_PHY_EXT_COMM_0_REG			0x30
+#define JM_PHY_EXT_COMM_1_REG			0x31
+#define JM_PHY_EXT_COMM_2_REG			0x32
+#define JM_PHY_EXT_COMM_2_CALI_ENABLE		0x01
+#define JM_PHY_EXT_COMM_2_CALI_MODE_0		0x02
+#define JM_PHY_EXT_COMM_2_CALI_LATCH		0x10
+#define PCI_PRIV_SHARE_NICCTRL			0xF5
+#define JME_FLAG_PHYEA_ENABLE			0x2
+
 /*
  * Wakeup Frame setup interface registers
  */