if (uptodate) {
set_buffer_uptodate(bh);
} else {
- if (!buffer_eopnotsupp(bh) && !quiet_error(bh)) {
+ if (!quiet_error(bh)) {
buffer_io_error(bh);
printk(KERN_WARNING "lost page write due to "
"I/O error on %s\n",
spin_unlock(lock);
/*
* Ensure any pending I/O completes so that
- * ll_rw_block() actually writes the current
- * contents - it is a noop if I/O is still in
- * flight on potentially older contents.
+ * write_dirty_buffer() actually writes the
+ * current contents - it is a noop if I/O is
+ * still in flight on potentially older
+ * contents.
*/
- ll_rw_block(SWRITE_SYNC_PLUG, 1, &bh);
+ write_dirty_buffer(bh, WRITE_SYNC_PLUG);
/*
* Kick off IO for the previous mapping. Note
bh->b_state = 0;
atomic_set(&bh->b_count, 0);
- bh->b_private = NULL;
bh->b_size = size;
/* Link the buffer to its page */
* and kswapd activity, but those code paths have their own
* higher-level throttling.
*/
- if (wbc->sync_mode != WB_SYNC_NONE || !wbc->nonblocking) {
+ if (wbc->sync_mode != WB_SYNC_NONE) {
lock_buffer(bh);
} else if (!trylock_buffer(bh)) {
redirty_page_for_writepage(wbc, page);
}
EXPORT_SYMBOL(page_zero_new_buffers);
-int block_prepare_write(struct page *page, unsigned from, unsigned to,
+int __block_write_begin(struct page *page, loff_t pos, unsigned len,
get_block_t *get_block)
{
+ unsigned from = pos & (PAGE_CACHE_SIZE - 1);
+ unsigned to = from + len;
struct inode *inode = page->mapping->host;
unsigned block_start, block_end;
sector_t block;
}
return err;
}
-EXPORT_SYMBOL(block_prepare_write);
+EXPORT_SYMBOL(__block_write_begin);
static int __block_commit_write(struct inode *inode, struct page *page,
unsigned from, unsigned to)
return 0;
}
-int __block_write_begin(struct page *page, loff_t pos, unsigned len,
- get_block_t *get_block)
-{
- unsigned start = pos & (PAGE_CACHE_SIZE - 1);
-
- return block_prepare_write(page, start, start + len, get_block);
-}
-EXPORT_SYMBOL(__block_write_begin);
-
/*
* block_write_begin takes care of the basic task of block allocation and
* bringing partial write blocks uptodate first.
else
end = PAGE_CACHE_SIZE;
- ret = block_prepare_write(page, 0, end, get_block);
+ ret = __block_write_begin(page, 0, end, get_block);
if (!ret)
ret = block_commit_write(page, 0, end);
*fsdata = NULL;
if (page_has_buffers(page)) {
- unlock_page(page);
- page_cache_release(page);
- *pagep = NULL;
- return block_write_begin(mapping, pos, len, flags, pagep,
- get_block);
+ ret = __block_write_begin(page, pos, len, get_block);
+ if (unlikely(ret))
+ goto out_release;
+ return ret;
}
if (PageMappedToDisk(page))
if (err == -EOPNOTSUPP) {
set_bit(BIO_EOPNOTSUPP, &bio->bi_flags);
- set_bit(BH_Eopnotsupp, &bh->b_state);
}
if (unlikely (test_bit(BIO_QUIET,&bio->bi_flags)))
BUG_ON(buffer_delay(bh));
BUG_ON(buffer_unwritten(bh));
- /*
- * Mask in barrier bit for a write (could be either a WRITE or a
- * WRITE_SYNC
- */
- if (buffer_ordered(bh) && (rw & WRITE))
- rw |= WRITE_BARRIER;
-
/*
* Only clear out a write error when rewriting
*/
/**
* ll_rw_block: low-level access to block devices (DEPRECATED)
- * @rw: whether to %READ or %WRITE or %SWRITE or maybe %READA (readahead)
+ * @rw: whether to %READ or %WRITE or maybe %READA (readahead)
* @nr: number of &struct buffer_heads in the array
* @bhs: array of pointers to &struct buffer_head
*
* ll_rw_block() takes an array of pointers to &struct buffer_heads, and
* requests an I/O operation on them, either a %READ or a %WRITE. The third
- * %SWRITE is like %WRITE only we make sure that the *current* data in buffers
- * are sent to disk. The fourth %READA option is described in the documentation
- * for generic_make_request() which ll_rw_block() calls.
+ * %READA option is described in the documentation for generic_make_request()
+ * which ll_rw_block() calls.
*
* This function drops any buffer that it cannot get a lock on (with the
- * BH_Lock state bit) unless SWRITE is required, any buffer that appears to be
- * clean when doing a write request, and any buffer that appears to be
- * up-to-date when doing read request. Further it marks as clean buffers that
- * are processed for writing (the buffer cache won't assume that they are
- * actually clean until the buffer gets unlocked).
+ * BH_Lock state bit), any buffer that appears to be clean when doing a write
+ * request, and any buffer that appears to be up-to-date when doing read
+ * request. Further it marks as clean buffers that are processed for
+ * writing (the buffer cache won't assume that they are actually clean
+ * until the buffer gets unlocked).
*
* ll_rw_block sets b_end_io to simple completion handler that marks
* the buffer up-to-date (if approriate), unlocks the buffer and wakes
for (i = 0; i < nr; i++) {
struct buffer_head *bh = bhs[i];
- if (rw == SWRITE || rw == SWRITE_SYNC || rw == SWRITE_SYNC_PLUG)
- lock_buffer(bh);
- else if (!trylock_buffer(bh))
+ if (!trylock_buffer(bh))
continue;
-
- if (rw == WRITE || rw == SWRITE || rw == SWRITE_SYNC ||
- rw == SWRITE_SYNC_PLUG) {
+ if (rw == WRITE) {
if (test_clear_buffer_dirty(bh)) {
bh->b_end_io = end_buffer_write_sync;
get_bh(bh);
- if (rw == SWRITE_SYNC)
- submit_bh(WRITE_SYNC, bh);
- else
- submit_bh(WRITE, bh);
+ submit_bh(WRITE, bh);
continue;
}
} else {
}
EXPORT_SYMBOL(ll_rw_block);
+void write_dirty_buffer(struct buffer_head *bh, int rw)
+{
+ lock_buffer(bh);
+ if (!test_clear_buffer_dirty(bh)) {
+ unlock_buffer(bh);
+ return;
+ }
+ bh->b_end_io = end_buffer_write_sync;
+ get_bh(bh);
+ submit_bh(rw, bh);
+}
+EXPORT_SYMBOL(write_dirty_buffer);
+
/*
* For a data-integrity writeout, we need to wait upon any in-progress I/O
* and then start new I/O and then wait upon it. The caller must have a ref on
* the buffer_head.
*/
-int sync_dirty_buffer(struct buffer_head *bh)
+int __sync_dirty_buffer(struct buffer_head *bh, int rw)
{
int ret = 0;
if (test_clear_buffer_dirty(bh)) {
get_bh(bh);
bh->b_end_io = end_buffer_write_sync;
- ret = submit_bh(WRITE_SYNC, bh);
+ ret = submit_bh(rw, bh);
wait_on_buffer(bh);
- if (buffer_eopnotsupp(bh)) {
- clear_buffer_eopnotsupp(bh);
- ret = -EOPNOTSUPP;
- }
if (!ret && !buffer_uptodate(bh))
ret = -EIO;
} else {
}
return ret;
}
+EXPORT_SYMBOL(__sync_dirty_buffer);
+
+int sync_dirty_buffer(struct buffer_head *bh)
+{
+ return __sync_dirty_buffer(bh, WRITE_SYNC);
+}
EXPORT_SYMBOL(sync_dirty_buffer);
/*