UCHAR SNAP_802_1H[] = { 0xaa, 0xaa, 0x03, 0x00, 0x00, 0x00 };
UCHAR SNAP_BRIDGE_TUNNEL[] = { 0xaa, 0xaa, 0x03, 0x00, 0x00, 0xf8 };
-// Add Cisco Aironet SNAP heade for CCX2 support
+/* Add Cisco Aironet SNAP heade for CCX2 support */
UCHAR SNAP_AIRONET[] = { 0xaa, 0xaa, 0x03, 0x00, 0x40, 0x96, 0x00, 0x00 };
UCHAR CKIP_LLC_SNAP[] = { 0xaa, 0xaa, 0x03, 0x00, 0x40, 0x96, 0x00, 0x02 };
UCHAR EAPOL_LLC_SNAP[] = { 0xaa, 0xaa, 0x03, 0x00, 0x00, 0x00, 0x88, 0x8e };
UCHAR APPLE_TALK[] = { 0x80, 0xf3 };
UCHAR RateIdToPlcpSignal[12] = {
- 0, /* RATE_1 */ 1, /* RATE_2 */ 2, /* RATE_5_5 */ 3, /* RATE_11 */// see BBP spec
- 11, /* RATE_6 */ 15, /* RATE_9 */ 10, /* RATE_12 */ 14, /* RATE_18 */// see IEEE802.11a-1999 p.14
+ 0, /* RATE_1 */ 1, /* RATE_2 */ 2, /* RATE_5_5 */ 3, /* RATE_11 *//* see BBP spec */
+ 11, /* RATE_6 */ 15, /* RATE_9 */ 10, /* RATE_12 */ 14, /* RATE_18 *//* see IEEE802.11a-1999 p.14 */
9, /* RATE_24 */ 13, /* RATE_36 */ 8, /* RATE_48 */ 12 /* RATE_54 */
-}; // see IEEE802.11a-1999 p.14
+}; /* see IEEE802.11a-1999 p.14 */
UCHAR OfdmSignalToRateId[16] = {
- RATE_54, RATE_54, RATE_54, RATE_54, // OFDM PLCP Signal = 0, 1, 2, 3 respectively
- RATE_54, RATE_54, RATE_54, RATE_54, // OFDM PLCP Signal = 4, 5, 6, 7 respectively
- RATE_48, RATE_24, RATE_12, RATE_6, // OFDM PLCP Signal = 8, 9, 10, 11 respectively
- RATE_54, RATE_36, RATE_18, RATE_9, // OFDM PLCP Signal = 12, 13, 14, 15 respectively
+ RATE_54, RATE_54, RATE_54, RATE_54, /* OFDM PLCP Signal = 0, 1, 2, 3 respectively */
+ RATE_54, RATE_54, RATE_54, RATE_54, /* OFDM PLCP Signal = 4, 5, 6, 7 respectively */
+ RATE_48, RATE_24, RATE_12, RATE_6, /* OFDM PLCP Signal = 8, 9, 10, 11 respectively */
+ RATE_54, RATE_36, RATE_18, RATE_9, /* OFDM PLCP Signal = 12, 13, 14, 15 respectively */
};
UCHAR OfdmRateToRxwiMCS[12] = {
0, 0, 0, 0,
- 0, 1, 2, 3, // OFDM rate 6,9,12,18 = rxwi mcs 0,1,2,3
- 4, 5, 6, 7, // OFDM rate 24,36,48,54 = rxwi mcs 4,5,6,7
+ 0, 1, 2, 3, /* OFDM rate 6,9,12,18 = rxwi mcs 0,1,2,3 */
+ 4, 5, 6, 7, /* OFDM rate 24,36,48,54 = rxwi mcs 4,5,6,7 */
};
UCHAR RxwiMCSToOfdmRate[12] = {
RATE_6, RATE_9, RATE_12, RATE_18,
- RATE_24, RATE_36, RATE_48, RATE_54, // OFDM rate 6,9,12,18 = rxwi mcs 0,1,2,3
- 4, 5, 6, 7, // OFDM rate 24,36,48,54 = rxwi mcs 4,5,6,7
+ RATE_24, RATE_36, RATE_48, RATE_54, /* OFDM rate 6,9,12,18 = rxwi mcs 0,1,2,3 */
+ 4, 5, 6, 7, /* OFDM rate 24,36,48,54 = rxwi mcs 4,5,6,7 */
};
char *MCSToMbps[] =
UCHAR default_cwmin[] =
{ CW_MIN_IN_BITS, CW_MIN_IN_BITS, CW_MIN_IN_BITS - 1, CW_MIN_IN_BITS - 2 };
-//UCHAR default_cwmax[]={CW_MAX_IN_BITS, CW_MAX_IN_BITS, CW_MIN_IN_BITS, CW_MIN_IN_BITS-1};
+/*UCHAR default_cwmax[]={CW_MAX_IN_BITS, CW_MAX_IN_BITS, CW_MIN_IN_BITS, CW_MIN_IN_BITS-1}; */
UCHAR default_sta_aifsn[] = { 3, 7, 2, 2 };
UCHAR MapUserPriorityToAccessCategory[8] =
PNDIS_PACKET pPacket;
NDIS_STATUS Status = NDIS_STATUS_SUCCESS;
ULONG FreeNum;
- UCHAR rtmpHwHdr[TXINFO_SIZE + TXWI_SIZE]; //RTMP_HW_HDR_LEN];
+ UCHAR rtmpHwHdr[TXINFO_SIZE + TXWI_SIZE]; /*RTMP_HW_HDR_LEN]; */
#ifdef RTMP_MAC_PCI
unsigned long IrqFlags = 0;
UCHAR IrqState;
-#endif // RTMP_MAC_PCI //
+#endif /* RTMP_MAC_PCI // */
BOOLEAN bUseDataQ = FALSE;
int retryCnt = 0;
QueIdx &= (~MGMT_USE_QUEUE_FLAG);
}
#ifdef RTMP_MAC_PCI
- // 2860C use Tx Ring
+ /* 2860C use Tx Ring */
IrqState = pAd->irq_disabled;
if (pAd->MACVersion == 0x28600100) {
QueIdx = (bUseDataQ == TRUE ? QueIdx : 3);
}
if (bUseDataQ && (!IrqState))
RTMP_IRQ_LOCK(&pAd->irq_lock, IrqFlags);
-#endif // RTMP_MAC_PCI //
+#endif /* RTMP_MAC_PCI // */
do {
- // Reset is in progress, stop immediately
+ /* Reset is in progress, stop immediately */
if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_RESET_IN_PROGRESS) ||
RTMP_TEST_FLAG(pAd,
fRTMP_ADAPTER_HALT_IN_PROGRESS |
Status = NDIS_STATUS_FAILURE;
break;
}
- // Check Free priority queue
- // Since we use PBF Queue2 for management frame. Its corresponding DMA ring should be using TxRing.
+ /* Check Free priority queue */
+ /* Since we use PBF Queue2 for management frame. Its corresponding DMA ring should be using TxRing. */
#ifdef RTMP_MAC_PCI
if (bUseDataQ) {
retryCnt = MAX_DATAMM_RETRY;
- // free Tx(QueIdx) resources
+ /* free Tx(QueIdx) resources */
RTMPFreeTXDUponTxDmaDone(pAd, QueIdx);
FreeNum = GET_TXRING_FREENO(pAd, QueIdx);
} else
-#endif // RTMP_MAC_PCI //
+#endif /* RTMP_MAC_PCI // */
{
FreeNum = GET_MGMTRING_FREENO(pAd);
}
if ((FreeNum > 0)) {
- // We need to reserve space for rtmp hardware header. i.e., TxWI for RT2860 and TxInfo+TxWI for RT2870
+ /* We need to reserve space for rtmp hardware header. i.e., TxWI for RT2860 and TxInfo+TxWI for RT2870 */
NdisZeroMemory(&rtmpHwHdr, (TXINFO_SIZE + TXWI_SIZE));
Status =
RTMPAllocateNdisPacket(pAd, &pPacket,
("MiniportMMRequest (error:: can't allocate NDIS PACKET)\n"));
break;
}
- //pAd->CommonCfg.MlmeTransmit.field.MODE = MODE_CCK;
- //pAd->CommonCfg.MlmeRate = RATE_2;
+ /*pAd->CommonCfg.MlmeTransmit.field.MODE = MODE_CCK; */
+ /*pAd->CommonCfg.MlmeRate = RATE_2; */
#ifdef RTMP_MAC_PCI
if (bUseDataQ) {
MlmeDataHardTransmit(pAd, QueIdx, pPacket);
retryCnt--;
} else
-#endif // RTMP_MAC_PCI //
+#endif /* RTMP_MAC_PCI // */
Status = MlmeHardTransmit(pAd, QueIdx, pPacket);
if (Status == NDIS_STATUS_SUCCESS)
retryCnt = 0;
MgmtRingFullCount));
}
}
-#endif // RTMP_MAC_PCI //
+#endif /* RTMP_MAC_PCI // */
DBGPRINT(RT_DEBUG_ERROR,
("Qidx(%d), not enough space in MgmtRing, MgmtRingFullCount=%ld!\n",
QueIdx,
#ifdef RTMP_MAC_PCI
if (bUseDataQ && (!IrqState))
RTMP_IRQ_UNLOCK(&pAd->irq_lock, IrqFlags);
-#endif // RTMP_MAC_PCI //
+#endif /* RTMP_MAC_PCI // */
return Status;
}
if (pAd->MACVersion == 0x28600100)
return MlmeHardTransmitTxRing(pAd, QueIdx, pPacket);
else
-#endif // RTMP_MAC_PCI //
+#endif /* RTMP_MAC_PCI // */
return MlmeHardTransmitMgmtRing(pAd, QueIdx, pPacket);
}
RTMP_QueryPacketInfo(pPacket, &PacketInfo, &pSrcBufVA, &SrcBufLen);
- // Make sure MGMT ring resource won't be used by other threads
+ /* Make sure MGMT ring resource won't be used by other threads */
RTMP_SEM_LOCK(&pAd->MgmtRingLock);
if (pSrcBufVA == NULL) {
- // The buffer shouldn't be NULL
+ /* The buffer shouldn't be NULL */
RTMP_SEM_UNLOCK(&pAd->MgmtRingLock);
return NDIS_STATUS_FAILURE;
}
{
- // outgoing frame always wakeup PHY to prevent frame lost
+ /* outgoing frame always wakeup PHY to prevent frame lost */
if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE))
AsicForceWakeup(pAd, TRUE);
}
pFirstTxWI = (PTXWI_STRUC) (pSrcBufVA + TXINFO_SIZE);
- pHeader_802_11 = (PHEADER_802_11) (pSrcBufVA + TXINFO_SIZE + TXWI_SIZE); //TXWI_SIZE);
+ pHeader_802_11 = (PHEADER_802_11) (pSrcBufVA + TXINFO_SIZE + TXWI_SIZE); /*TXWI_SIZE); */
if (pHeader_802_11->Addr1[0] & 0x01) {
MlmeRate = pAd->CommonCfg.BasicMlmeRate;
MlmeRate = pAd->CommonCfg.MlmeRate;
}
- // Verify Mlme rate for a / g bands.
- if ((pAd->LatchRfRegs.Channel > 14) && (MlmeRate < RATE_6)) // 11A band
+ /* Verify Mlme rate for a / g bands. */
+ if ((pAd->LatchRfRegs.Channel > 14) && (MlmeRate < RATE_6)) /* 11A band */
MlmeRate = RATE_6;
if ((pHeader_802_11->FC.Type == BTYPE_DATA) &&
}
{
- // Fixed W52 with Activity scan issue in ABG_MIXED and ABGN_MIXED mode.
+ /* Fixed W52 with Activity scan issue in ABG_MIXED and ABGN_MIXED mode. */
if (pAd->CommonCfg.PhyMode == PHY_11ABG_MIXED
|| pAd->CommonCfg.PhyMode == PHY_11ABGN_MIXED) {
if (pAd->LatchRfRegs.Channel > 14)
}
}
- //
- // Should not be hard code to set PwrMgmt to 0 (PWR_ACTIVE)
- // Snice it's been set to 0 while on MgtMacHeaderInit
- // By the way this will cause frame to be send on PWR_SAVE failed.
- //
- pHeader_802_11->FC.PwrMgmt = PWR_ACTIVE; // (pAd->StaCfg.Psm == PWR_SAVE);
-
- //
- // In WMM-UAPSD, mlme frame should be set psm as power saving but probe request frame
- // Data-Null packets alse pass through MMRequest in RT2860, however, we hope control the psm bit to pass APSD
-// if ((pHeader_802_11->FC.Type != BTYPE_DATA) && (pHeader_802_11->FC.Type != BTYPE_CNTL))
+ /* */
+ /* Should not be hard code to set PwrMgmt to 0 (PWR_ACTIVE) */
+ /* Snice it's been set to 0 while on MgtMacHeaderInit */
+ /* By the way this will cause frame to be send on PWR_SAVE failed. */
+ /* */
+ pHeader_802_11->FC.PwrMgmt = PWR_ACTIVE; /* (pAd->StaCfg.Psm == PWR_SAVE); */
+
+ /* */
+ /* In WMM-UAPSD, mlme frame should be set psm as power saving but probe request frame */
+ /* Data-Null packets alse pass through MMRequest in RT2860, however, we hope control the psm bit to pass APSD */
+/* if ((pHeader_802_11->FC.Type != BTYPE_DATA) && (pHeader_802_11->FC.Type != BTYPE_CNTL)) */
{
if ((pHeader_802_11->FC.SubType == SUBTYPE_ACTION) ||
((pHeader_802_11->FC.Type == BTYPE_DATA) &&
}
bInsertTimestamp = FALSE;
- if (pHeader_802_11->FC.Type == BTYPE_CNTL) // must be PS-POLL
+ if (pHeader_802_11->FC.Type == BTYPE_CNTL) /* must be PS-POLL */
{
- //Set PM bit in ps-poll, to fix WLK 1.2 PowerSaveMode_ext failure issue.
+ /*Set PM bit in ps-poll, to fix WLK 1.2 PowerSaveMode_ext failure issue. */
if ((pAd->OpMode == OPMODE_STA)
&& (pHeader_802_11->FC.SubType == SUBTYPE_PS_POLL)) {
pHeader_802_11->FC.PwrMgmt = PWR_SAVE;
}
bAckRequired = FALSE;
- } else // BTYPE_MGMT or BTYPE_DATA(must be NULL frame)
+ } else /* BTYPE_MGMT or BTYPE_DATA(must be NULL frame) */
{
- //pAd->Sequence++;
- //pHeader_802_11->Sequence = pAd->Sequence;
+ /*pAd->Sequence++; */
+ /*pHeader_802_11->Sequence = pAd->Sequence; */
- if (pHeader_802_11->Addr1[0] & 0x01) // MULTICAST, BROADCAST
+ if (pHeader_802_11->Addr1[0] & 0x01) /* MULTICAST, BROADCAST */
{
bAckRequired = FALSE;
pHeader_802_11->Duration = 0;
if ((pHeader_802_11->FC.SubType == SUBTYPE_PROBE_RSP)
&& (pHeader_802_11->FC.Type == BTYPE_MGMT)) {
bInsertTimestamp = TRUE;
- bAckRequired = FALSE; // Disable ACK to prevent retry 0x1f for Probe Response
+ bAckRequired = FALSE; /* Disable ACK to prevent retry 0x1f for Probe Response */
} else
if ((pHeader_802_11->FC.SubType ==
SUBTYPE_PROBE_REQ)
&& (pHeader_802_11->FC.Type == BTYPE_MGMT)) {
- bAckRequired = FALSE; // Disable ACK to prevent retry 0x1f for Probe Request
+ bAckRequired = FALSE; /* Disable ACK to prevent retry 0x1f for Probe Request */
}
}
}
if (pAd->Sequence > 0xfff)
pAd->Sequence = 0;
- // Before radar detection done, mgmt frame can not be sent but probe req
- // Because we need to use probe req to trigger driver to send probe req in passive scan
+ /* Before radar detection done, mgmt frame can not be sent but probe req */
+ /* Because we need to use probe req to trigger driver to send probe req in passive scan */
if ((pHeader_802_11->FC.SubType != SUBTYPE_PROBE_REQ)
&& (pAd->CommonCfg.bIEEE80211H == 1)
&& (pAd->CommonCfg.RadarDetect.RDMode != RD_NORMAL_MODE)) {
DBGPRINT(RT_DEBUG_ERROR,
("MlmeHardTransmit --> radar detect not in normal mode !!!\n"));
-// if (!IrqState)
+/* if (!IrqState) */
RTMP_SEM_UNLOCK(&pAd->MgmtRingLock);
return (NDIS_STATUS_FAILURE);
}
- //
- // fill scatter-and-gather buffer list into TXD. Internally created NDIS PACKET
- // should always has only one physical buffer, and the whole frame size equals
- // to the first scatter buffer size
- //
+ /* */
+ /* fill scatter-and-gather buffer list into TXD. Internally created NDIS PACKET */
+ /* should always has only one physical buffer, and the whole frame size equals */
+ /* to the first scatter buffer size */
+ /* */
- // Initialize TX Descriptor
- // For inter-frame gap, the number is for this frame and next frame
- // For MLME rate, we will fix as 2Mb to match other vendor's implement
-// pAd->CommonCfg.MlmeTransmit.field.MODE = 1;
+ /* Initialize TX Descriptor */
+ /* For inter-frame gap, the number is for this frame and next frame */
+ /* For MLME rate, we will fix as 2Mb to match other vendor's implement */
+/* pAd->CommonCfg.MlmeTransmit.field.MODE = 1; */
-// management frame doesn't need encryption. so use RESERVED_WCID no matter u are sending to specific wcid or not.
+/* management frame doesn't need encryption. so use RESERVED_WCID no matter u are sending to specific wcid or not. */
PID = PID_MGMT;
if (pMacEntry == NULL) {
IFS_BACKOFF, FALSE, &pMacEntry->MaxHTPhyMode);
}
- // Now do hardware-depened kick out.
+ /* Now do hardware-depened kick out. */
HAL_KickOutMgmtTx(pAd, QueIdx, pPacket, pSrcBufVA, SrcBufLen);
- // Make sure to release MGMT ring resource
-// if (!IrqState)
+ /* Make sure to release MGMT ring resource */
+/* if (!IrqState) */
RTMP_SEM_UNLOCK(&pAd->MgmtRingLock);
return NDIS_STATUS_SUCCESS;
}
BOOLEAN bHTRate = FALSE;
Wcid = RTMP_GET_PACKET_WCID(pPacket);
- if (Wcid == MCAST_WCID) { // Handle for RA is Broadcast/Multicast Address.
+ if (Wcid == MCAST_WCID) { /* Handle for RA is Broadcast/Multicast Address. */
return TX_MCAST_FRAME;
}
- // Handle for unicast packets
+ /* Handle for unicast packets */
pMacEntry = &pAd->MacTab.Content[Wcid];
- if (RTMP_GET_PACKET_LOWRATE(pPacket)) { // It's a specific packet need to force low rate, i.e., bDHCPFrame, bEAPOLFrame, bWAIFrame
+ if (RTMP_GET_PACKET_LOWRATE(pPacket)) { /* It's a specific packet need to force low rate, i.e., bDHCPFrame, bEAPOLFrame, bWAIFrame */
TxFrameType = TX_LEGACY_FRAME;
- } else if (IS_HT_RATE(pMacEntry)) { // it's a 11n capable packet
+ } else if (IS_HT_RATE(pMacEntry)) { /* it's a 11n capable packet */
- // Depends on HTPhyMode to check if the peer support the HTRate transmission.
- // Currently didn't support A-MSDU embedded in A-MPDU
+ /* Depends on HTPhyMode to check if the peer support the HTRate transmission. */
+ /* Currently didn't support A-MSDU embedded in A-MPDU */
bHTRate = TRUE;
if (RTMP_GET_PACKET_MOREDATA(pPacket)
|| (pMacEntry->PsMode == PWR_SAVE))
return TX_AMSDU_FRAME;
else
TxFrameType = TX_LEGACY_FRAME;
- } else { // it's a legacy b/g packet.
- if ((CLIENT_STATUS_TEST_FLAG(pMacEntry, fCLIENT_STATUS_AGGREGATION_CAPABLE) && pAd->CommonCfg.bAggregationCapable) && (RTMP_GET_PACKET_TXRATE(pPacket) >= RATE_6) && (!(OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_WMM_INUSED) && CLIENT_STATUS_TEST_FLAG(pMacEntry, fCLIENT_STATUS_WMM_CAPABLE)))) { // if peer support Ralink Aggregation, we use it.
+ } else { /* it's a legacy b/g packet. */
+ if ((CLIENT_STATUS_TEST_FLAG(pMacEntry, fCLIENT_STATUS_AGGREGATION_CAPABLE) && pAd->CommonCfg.bAggregationCapable) && (RTMP_GET_PACKET_TXRATE(pPacket) >= RATE_6) && (!(OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_WMM_INUSED) && CLIENT_STATUS_TEST_FLAG(pMacEntry, fCLIENT_STATUS_WMM_CAPABLE)))) { /* if peer support Ralink Aggregation, we use it. */
TxFrameType = TX_RALINK_FRAME;
} else {
TxFrameType = TX_LEGACY_FRAME;
}
}
- // Currently, our fragment only support when a unicast packet send as NOT-ARALINK, NOT-AMSDU and NOT-AMPDU.
+ /* Currently, our fragment only support when a unicast packet send as NOT-ARALINK, NOT-AMSDU and NOT-AMPDU. */
if ((RTMP_GET_PACKET_FRAGMENTS(pPacket) > 1)
&& (TxFrameType == TX_LEGACY_FRAME))
TxFrameType = TX_FRAG_FRAME;
pTxBlk->Wcid = RTMP_GET_PACKET_WCID(pPacket);
pTxBlk->apidx = RTMP_GET_PACKET_IF(pPacket);
pTxBlk->UserPriority = RTMP_GET_PACKET_UP(pPacket);
- pTxBlk->FrameGap = IFS_HTTXOP; // ASIC determine Frame Gap
+ pTxBlk->FrameGap = IFS_HTTXOP; /* ASIC determine Frame Gap */
if (RTMP_GET_PACKET_CLEAR_EAP_FRAME(pTxBlk->pPacket))
TX_BLK_SET_FLAG(pTxBlk, fTX_bClearEAPFrame);
else
TX_BLK_CLEAR_FLAG(pTxBlk, fTX_bClearEAPFrame);
- // Default to clear this flag
+ /* Default to clear this flag */
TX_BLK_CLEAR_FLAG(pTxBlk, fTX_bForceNonQoS);
if (pTxBlk->Wcid == MCAST_WCID) {
&pAd->MacTab.Content[MCAST_WCID].HTPhyMode;
}
- TX_BLK_CLEAR_FLAG(pTxBlk, fTX_bAckRequired); // AckRequired = FALSE, when broadcast packet in Adhoc mode.
- //TX_BLK_SET_FLAG(pTxBlk, fTX_bForceLowRate);
+ TX_BLK_CLEAR_FLAG(pTxBlk, fTX_bAckRequired); /* AckRequired = FALSE, when broadcast packet in Adhoc mode. */
+ /*TX_BLK_SET_FLAG(pTxBlk, fTX_bForceLowRate); */
TX_BLK_CLEAR_FLAG(pTxBlk, fTX_bAllowFrag);
TX_BLK_CLEAR_FLAG(pTxBlk, fTX_bWMM);
if (RTMP_GET_PACKET_MOREDATA(pPacket)) {
pMacEntry = pTxBlk->pMacEntry;
- // For all unicast packets, need Ack unless the Ack Policy is not set as NORMAL_ACK.
+ /* For all unicast packets, need Ack unless the Ack Policy is not set as NORMAL_ACK. */
if (pAd->CommonCfg.AckPolicy[pTxBlk->QueIdx] != NORMAL_ACK)
TX_BLK_CLEAR_FLAG(pTxBlk, fTX_bAckRequired);
else
{
{
- // If support WMM, enable it.
+ /* If support WMM, enable it. */
if (OPSTATUS_TEST_FLAG
(pAd, fOP_STATUS_WMM_INUSED)
&& CLIENT_STATUS_TEST_FLAG(pMacEntry,
fCLIENT_STATUS_WMM_CAPABLE))
TX_BLK_SET_FLAG(pTxBlk, fTX_bWMM);
-// if (pAd->StaCfg.bAutoTxRateSwitch)
-// TX_BLK_SET_FLAG(pTxBlk, fTX_AutoRateSwitch);
+/* if (pAd->StaCfg.bAutoTxRateSwitch) */
+/* TX_BLK_SET_FLAG(pTxBlk, fTX_AutoRateSwitch); */
}
}
if (pTxBlk->TxFrameType == TX_LEGACY_FRAME) {
- if ((RTMP_GET_PACKET_LOWRATE(pPacket)) || ((pAd->OpMode == OPMODE_AP) && (pMacEntry->MaxHTPhyMode.field.MODE == MODE_CCK) && (pMacEntry->MaxHTPhyMode.field.MCS == RATE_1))) { // Specific packet, i.e., bDHCPFrame, bEAPOLFrame, bWAIFrame, need force low rate.
+ if ((RTMP_GET_PACKET_LOWRATE(pPacket)) || ((pAd->OpMode == OPMODE_AP) && (pMacEntry->MaxHTPhyMode.field.MODE == MODE_CCK) && (pMacEntry->MaxHTPhyMode.field.MCS == RATE_1))) { /* Specific packet, i.e., bDHCPFrame, bEAPOLFrame, bWAIFrame, need force low rate. */
pTxBlk->pTransmit =
&pAd->MacTab.Content[MCAST_WCID].HTPhyMode;
- // Modify the WMM bit for ICV issue. If we have a packet with EOSP field need to set as 1, how to handle it???
+ /* Modify the WMM bit for ICV issue. If we have a packet with EOSP field need to set as 1, how to handle it??? */
if (IS_HT_STA(pTxBlk->pMacEntry) &&
(CLIENT_STATUS_TEST_FLAG
(pMacEntry, fCLIENT_STATUS_RALINK_CHIPSET))
}
}
- if ((IS_HT_RATE(pMacEntry) == FALSE) && (CLIENT_STATUS_TEST_FLAG(pMacEntry, fCLIENT_STATUS_PIGGYBACK_CAPABLE))) { // Currently piggy-back only support when peer is operate in b/g mode.
+ if ((IS_HT_RATE(pMacEntry) == FALSE) && (CLIENT_STATUS_TEST_FLAG(pMacEntry, fCLIENT_STATUS_PIGGYBACK_CAPABLE))) { /* Currently piggy-back only support when peer is operate in b/g mode. */
TX_BLK_SET_FLAG(pTxBlk, fTX_bPiggyBack);
}
IN NDIS_PACKET * pPacket, IN TX_BLK * pTxBlk)
{
- //DBGPRINT(RT_DEBUG_TRACE, ("Check if can do aggregation! TxFrameType=%d!\n", pTxBlk->TxFrameType));
+ /*DBGPRINT(RT_DEBUG_TRACE, ("Check if can do aggregation! TxFrameType=%d!\n", pTxBlk->TxFrameType)); */
if (RTMP_GET_PACKET_WCID(pPacket) == MCAST_WCID)
return FALSE;
RTMP_GET_PACKET_EAPOL(pPacket) || RTMP_GET_PACKET_WAI(pPacket))
return FALSE;
- if ((pTxBlk->TxFrameType == TX_AMSDU_FRAME) && ((pTxBlk->TotalFrameLen + GET_OS_PKT_LEN(pPacket)) > (RX_BUFFER_AGGRESIZE - 100))) { // For AMSDU, allow the packets with total length < max-amsdu size
+ if ((pTxBlk->TxFrameType == TX_AMSDU_FRAME) && ((pTxBlk->TotalFrameLen + GET_OS_PKT_LEN(pPacket)) > (RX_BUFFER_AGGRESIZE - 100))) { /* For AMSDU, allow the packets with total length < max-amsdu size */
return FALSE;
}
- if ((pTxBlk->TxFrameType == TX_RALINK_FRAME) && (pTxBlk->TxPacketList.Number == 2)) { // For RALINK-Aggregation, allow two frames in one batch.
+ if ((pTxBlk->TxFrameType == TX_RALINK_FRAME) && (pTxBlk->TxPacketList.Number == 2)) { /* For RALINK-Aggregation, allow two frames in one batch. */
return FALSE;
}
- if ((INFRA_ON(pAd)) && (pAd->OpMode == OPMODE_STA)) // must be unicast to AP
+ if ((INFRA_ON(pAd)) && (pAd->OpMode == OPMODE_STA)) /* must be unicast to AP */
return TRUE;
else
return FALSE;
if (QIdx == NUM_OF_TX_RING) {
sQIdx = 0;
- eQIdx = 3; // 4 ACs, start from 0.
+ eQIdx = 3; /* 4 ACs, start from 0. */
} else {
sQIdx = eQIdx = QIdx;
}
FreeNumber[QueIdx] = GET_TXRING_FREENO(pAd, QueIdx);
if (FreeNumber[QueIdx] <= 5) {
- // free Tx(QueIdx) resources
+ /* free Tx(QueIdx) resources */
RTMPFreeTXDUponTxDmaDone(pAd, QueIdx);
FreeNumber[QueIdx] =
GET_TXRING_FREENO(pAd, QueIdx);
}
-#endif // RTMP_MAC_PCI //
+#endif /* RTMP_MAC_PCI // */
- // probe the Queue Head
+ /* probe the Queue Head */
pQueue = &pAd->TxSwQueue[QueIdx];
if ((pEntry = pQueue->Head) == NULL) {
DEQUEUE_UNLOCK(&pAd->irq_lock, bIntContext,
pTxBlk = &TxBlk;
NdisZeroMemory((PUCHAR) pTxBlk, sizeof(TX_BLK));
- //InitializeQueueHeader(&pTxBlk->TxPacketList); // Didn't need it because we already memzero it.
+ /*InitializeQueueHeader(&pTxBlk->TxPacketList); // Didn't need it because we already memzero it. */
pTxBlk->QueIdx = QueIdx;
pPacket = QUEUE_ENTRY_TO_PACKET(pEntry);
- // Early check to make sure we have enoguh Tx Resource.
+ /* Early check to make sure we have enoguh Tx Resource. */
hasTxDesc =
RTMP_HAS_ENOUGH_FREE_DESC(pAd, pTxBlk,
FreeNumber[QueIdx],
pTxBlk->TxFrameType = TxPktClassification(pAd, pPacket);
pEntry = RemoveHeadQueue(pQueue);
pTxBlk->TotalFrameNum++;
- pTxBlk->TotalFragNum += RTMP_GET_PACKET_FRAGMENTS(pPacket); // The real fragment number maybe vary
+ pTxBlk->TotalFragNum += RTMP_GET_PACKET_FRAGMENTS(pPacket); /* The real fragment number maybe vary */
pTxBlk->TotalFrameLen += GET_OS_PKT_LEN(pPacket);
pTxBlk->pPacket = pPacket;
InsertTailQueue(&pTxBlk->TxPacketList,
if (pTxBlk->TxFrameType == TX_RALINK_FRAME
|| pTxBlk->TxFrameType == TX_AMSDU_FRAME) {
- // Enhance SW Aggregation Mechanism
+ /* Enhance SW Aggregation Mechanism */
if (NEED_QUEUE_BACK_FOR_AGG
(pAd, QueIdx, FreeNumber[QueIdx],
pTxBlk->TxFrameType)) {
if ((pEntry = pQueue->Head) == NULL)
break;
- // For TX_AMSDU_FRAME/TX_RALINK_FRAME, Need to check if next pakcet can do aggregation.
+ /* For TX_AMSDU_FRAME/TX_RALINK_FRAME, Need to check if next pakcet can do aggregation. */
pPacket = QUEUE_ENTRY_TO_PACKET(pEntry);
FreeNumber[QueIdx] =
GET_TXRING_FREENO(pAd, QueIdx);
(pAd, pPacket, pTxBlk) == FALSE))
break;
- //Remove the packet from the TxSwQueue and insert into pTxBlk
+ /*Remove the packet from the TxSwQueue and insert into pTxBlk */
pEntry = RemoveHeadQueue(pQueue);
ASSERT(pEntry);
pPacket = QUEUE_ENTRY_TO_PACKET(pEntry);
pTxBlk->TotalFrameNum++;
- pTxBlk->TotalFragNum += RTMP_GET_PACKET_FRAGMENTS(pPacket); // The real fragment number maybe vary
+ pTxBlk->TotalFragNum += RTMP_GET_PACKET_FRAGMENTS(pPacket); /* The real fragment number maybe vary */
pTxBlk->TotalFrameLen +=
GET_OS_PKT_LEN(pPacket);
InsertTailQueue(&pTxBlk->TxPacketList,
}
#ifdef RTMP_MAC_USB
DEQUEUE_UNLOCK(&pAd->irq_lock, bIntContext, IrqFlags);
-#endif // RTMP_MAC_USB //
+#endif /* RTMP_MAC_USB // */
Count += pTxBlk->TxPacketList.Number;
- // Do HardTransmit now.
+ /* Do HardTransmit now. */
Status = STAHardTransmit(pAd, pTxBlk, QueIdx);
#ifdef RTMP_MAC_PCI
DEQUEUE_UNLOCK(&pAd->irq_lock, bIntContext, IrqFlags);
- // static rate also need NICUpdateFifoStaCounters() function.
- //if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_TX_RATE_SWITCH_ENABLED))
+ /* static rate also need NICUpdateFifoStaCounters() function. */
+ /*if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_TX_RATE_SWITCH_ENABLED)) */
NICUpdateFifoStaCounters(pAd);
-#endif // RTMP_MAC_PCI //
+#endif /* RTMP_MAC_PCI // */
}
#ifdef RTMP_MAC_USB
if (!hasTxDesc)
RTUSBKickBulkOut(pAd);
-#endif // RTMP_MAC_USB //
+#endif /* RTMP_MAC_USB // */
}
}
{
ULONG Duration = 0;
- if (Rate < RATE_FIRST_OFDM_RATE) // CCK
+ if (Rate < RATE_FIRST_OFDM_RATE) /* CCK */
{
if ((Rate > RATE_1)
&& OPSTATUS_TEST_FLAG(pAd,
fOP_STATUS_SHORT_PREAMBLE_INUSED))
- Duration = 96; // 72+24 preamble+plcp
+ Duration = 96; /* 72+24 preamble+plcp */
else
- Duration = 192; // 144+48 preamble+plcp
+ Duration = 192; /* 144+48 preamble+plcp */
Duration += (USHORT) ((Size << 4) / RateIdTo500Kbps[Rate]);
if ((Size << 4) % RateIdTo500Kbps[Rate])
Duration++;
- } else if (Rate <= RATE_LAST_OFDM_RATE) // OFDM rates
+ } else if (Rate <= RATE_LAST_OFDM_RATE) /* OFDM rates */
{
- Duration = 20 + 6; // 16+4 preamble+plcp + Signal Extension
+ Duration = 20 + 6; /* 16+4 preamble+plcp + Signal Extension */
Duration +=
4 * (USHORT) ((11 + Size * 4) / RateIdTo500Kbps[Rate]);
if ((11 + Size * 4) % RateIdTo500Kbps[Rate])
Duration += 4;
- } else //mimo rate
+ } else /*mimo rate */
{
- Duration = 20 + 6; // 16+4 preamble+plcp + Signal Extension
+ Duration = 20 + 6; /* 16+4 preamble+plcp + Signal Extension */
}
return (USHORT) Duration;
========================================================================
*/
-VOID RTMPWriteTxWI(IN PRTMP_ADAPTER pAd, IN PTXWI_STRUC pOutTxWI, IN BOOLEAN FRAG, IN BOOLEAN CFACK, IN BOOLEAN InsTimestamp, IN BOOLEAN AMPDU, IN BOOLEAN Ack, IN BOOLEAN NSeq, // HW new a sequence.
+VOID RTMPWriteTxWI(IN PRTMP_ADAPTER pAd, IN PTXWI_STRUC pOutTxWI, IN BOOLEAN FRAG, IN BOOLEAN CFACK, IN BOOLEAN InsTimestamp, IN BOOLEAN AMPDU, IN BOOLEAN Ack, IN BOOLEAN NSeq, /* HW new a sequence. */
IN UCHAR BASize,
IN UCHAR WCID,
IN ULONG Length,
if (WCID < MAX_LEN_OF_MAC_TABLE)
pMac = &pAd->MacTab.Content[WCID];
- //
- // Always use Long preamble before verifiation short preamble functionality works well.
- // Todo: remove the following line if short preamble functionality works
- //
+ /* */
+ /* Always use Long preamble before verifiation short preamble functionality works well. */
+ /* Todo: remove the following line if short preamble functionality works */
+ /* */
OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_SHORT_PREAMBLE_INUSED);
NdisZeroMemory(&TxWI, TXWI_SIZE);
pTxWI = &TxWI;
pTxWI->txop = Txopmode;
pTxWI->NSEQ = NSeq;
- // John tune the performace with Intel Client in 20 MHz performance
+ /* John tune the performace with Intel Client in 20 MHz performance */
BASize = pAd->CommonCfg.TxBASize;
if (pAd->MACVersion == 0x28720200) {
if (BASize > 13)
pTxWI->MPDUtotalByteCount = Length;
pTxWI->PacketId = PID;
- // If CCK or OFDM, BW must be 20
+ /* If CCK or OFDM, BW must be 20 */
pTxWI->BW =
(pTransmit->field.MODE <=
MODE_OFDM) ? (BW_20) : (pTransmit->field.BW);
if (pAd->CommonCfg.bMIMOPSEnable) {
if ((pMac->MmpsMode == MMPS_DYNAMIC)
&& (pTransmit->field.MCS > 7)) {
- // Dynamic MIMO Power Save Mode
+ /* Dynamic MIMO Power Save Mode */
pTxWI->MIMOps = 1;
} else if (pMac->MmpsMode == MMPS_STATIC) {
- // Static MIMO Power Save Mode
+ /* Static MIMO Power Save Mode */
if (pTransmit->field.MODE >= MODE_HTMIX
&& pTransmit->field.MCS > 7) {
pTxWI->MCS = 7;
}
}
}
- //pTxWI->MIMOps = (pMac->PsMode == PWR_MMPS)? 1:0;
+ /*pTxWI->MIMOps = (pMac->PsMode == PWR_MMPS)? 1:0; */
if (pMac->bIAmBadAtheros
&& (pMac->WepStatus != Ndis802_11WEPDisabled)) {
pTxWI->MpduDensity = 7;
pTransmit = pTxBlk->pTransmit;
pMacEntry = pTxBlk->pMacEntry;
- //
- // Always use Long preamble before verifiation short preamble functionality works well.
- // Todo: remove the following line if short preamble functionality works
- //
+ /* */
+ /* Always use Long preamble before verifiation short preamble functionality works well. */
+ /* Todo: remove the following line if short preamble functionality works */
+ /* */
OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_SHORT_PREAMBLE_INUSED);
NdisZeroMemory(pTxWI, TXWI_SIZE);
pTxWI->MPDUtotalByteCount = pTxBlk->MpduHeaderLen + pTxBlk->SrcBufLen;
pTxWI->CFACK = TX_BLK_TEST_FLAG(pTxBlk, fTX_bPiggyBack);
- // If CCK or OFDM, BW must be 20
+ /* If CCK or OFDM, BW must be 20 */
pTxWI->BW =
(pTransmit->field.MODE <=
MODE_OFDM) ? (BW_20) : (pTransmit->field.BW);
pTxWI->AMPDU = ((pTxBlk->TxFrameType == TX_AMPDU_FRAME) ? TRUE : FALSE);
- // John tune the performace with Intel Client in 20 MHz performance
+ /* John tune the performace with Intel Client in 20 MHz performance */
BASize = pAd->CommonCfg.TxBASize;
if ((pTxBlk->TxFrameType == TX_AMPDU_FRAME) && (pMacEntry)) {
- UCHAR RABAOriIdx = 0; //The RA's BA Originator table index.
+ UCHAR RABAOriIdx = 0; /*The RA's BA Originator table index. */
RABAOriIdx =
pTxBlk->pMacEntry->BAOriWcidArray[pTxBlk->UserPriority];
if (pMacEntry) {
if ((pMacEntry->MmpsMode == MMPS_DYNAMIC)
&& (pTransmit->field.MCS > 7)) {
- // Dynamic MIMO Power Save Mode
+ /* Dynamic MIMO Power Save Mode */
pTxWI->MIMOps = 1;
} else if (pMacEntry->MmpsMode == MMPS_STATIC) {
- // Static MIMO Power Save Mode
+ /* Static MIMO Power Save Mode */
if (pTransmit->field.MODE >= MODE_HTMIX
&& pTransmit->field.MCS > 7) {
pTxWI->MCS = 7;
}
}
- // for rate adapation
+ /* for rate adapation */
pTxWI->PacketId = pTxWI->MCS;
}
PHTTRANSMIT_SETTING /*pTxHTPhyMode, */ pTransmit;
PMAC_TABLE_ENTRY pMacEntry;
- //
- // update TXWI
- //
+ /* */
+ /* update TXWI */
+ /* */
pMacEntry = pTxBlk->pMacEntry;
pTransmit = pTxBlk->pTransmit;
- //if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_TX_RATE_SWITCH_ENABLED))
- //if (RTMPCheckEntryEnableAutoRateSwitch(pAd, pMacEntry))
- //if (TX_BLK_TEST_FLAG(pTxBlk, fTX_AutoRateSwitch))
+ /*if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_TX_RATE_SWITCH_ENABLED)) */
+ /*if (RTMPCheckEntryEnableAutoRateSwitch(pAd, pMacEntry)) */
+ /*if (TX_BLK_TEST_FLAG(pTxBlk, fTX_AutoRateSwitch)) */
if (pMacEntry->bAutoTxRateSwitch) {
pTxWI->txop = IFS_HTTXOP;
- // If CCK or OFDM, BW must be 20
+ /* If CCK or OFDM, BW must be 20 */
pTxWI->BW =
(pTransmit->field.MODE <=
MODE_OFDM) ? (BW_20) : (pTransmit->field.BW);
pTxWI->MCS = pTransmit->field.MCS;
pTxWI->PHYMODE = pTransmit->field.MODE;
- // set PID for TxRateSwitching
+ /* set PID for TxRateSwitching */
pTxWI->PacketId = pTransmit->field.MCS;
}
pTxWI->MIMOps = 0;
if (pAd->CommonCfg.bMIMOPSEnable) {
- // MIMO Power Save Mode
+ /* MIMO Power Save Mode */
if ((pMacEntry->MmpsMode == MMPS_DYNAMIC)
&& (pTransmit->field.MCS > 7)) {
- // Dynamic MIMO Power Save Mode
+ /* Dynamic MIMO Power Save Mode */
pTxWI->MIMOps = 1;
} else if (pMacEntry->MmpsMode == MMPS_STATIC) {
- // Static MIMO Power Save Mode
+ /* Static MIMO Power Save Mode */
if ((pTransmit->field.MODE >= MODE_HTMIX)
&& (pTransmit->field.MCS > 7)) {
pTxWI->MCS = 7;
}
-// should be called only when -
-// 1. MEADIA_CONNECTED
-// 2. AGGREGATION_IN_USED
-// 3. Fragmentation not in used
-// 4. either no previous frame (pPrevAddr1=NULL) .OR. previoud frame is aggregatible
+/* should be called only when - */
+/* 1. MEADIA_CONNECTED */
+/* 2. AGGREGATION_IN_USED */
+/* 3. Fragmentation not in used */
+/* 4. either no previous frame (pPrevAddr1=NULL) .OR. previoud frame is aggregatible */
BOOLEAN TxFrameIsAggregatible(IN PRTMP_ADAPTER pAd,
IN PUCHAR pPrevAddr1, IN PUCHAR p8023hdr)
{
- // can't aggregate EAPOL (802.1x) frame
+ /* can't aggregate EAPOL (802.1x) frame */
if ((p8023hdr[12] == 0x88) && (p8023hdr[13] == 0x8e))
return FALSE;
- // can't aggregate multicast/broadcast frame
+ /* can't aggregate multicast/broadcast frame */
if (p8023hdr[0] & 0x01)
return FALSE;
- if (INFRA_ON(pAd)) // must be unicast to AP
+ if (INFRA_ON(pAd)) /* must be unicast to AP */
return TRUE;
- else if ((pPrevAddr1 == NULL) || MAC_ADDR_EQUAL(pPrevAddr1, p8023hdr)) // unicast to same STA
+ else if ((pPrevAddr1 == NULL) || MAC_ADDR_EQUAL(pPrevAddr1, p8023hdr)) /* unicast to same STA */
return TRUE;
else
return FALSE;
return TRUE;
}
#ifdef AGGREGATION_SUPPORT
- if (TxRate >= RATE_6 && pAd->CommonCfg.bAggregationCapable && (!(OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_WMM_INUSED) && CLIENT_STATUS_TEST_FLAG(pMacEntry, fCLIENT_STATUS_WMM_CAPABLE)))) { // legacy Ralink Aggregation support
+ if (TxRate >= RATE_6 && pAd->CommonCfg.bAggregationCapable && (!(OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_WMM_INUSED) && CLIENT_STATUS_TEST_FLAG(pMacEntry, fCLIENT_STATUS_WMM_CAPABLE)))) { /* legacy Ralink Aggregation support */
return TRUE;
}
-#endif // AGGREGATION_SUPPORT //
+#endif /* AGGREGATION_SUPPORT // */
}
return FALSE;
{
ULONG Number;
- // 2004-11-15 to be removed. test aggregation only
-// if ((OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_AGGREGATION_INUSED)) && (*pNumber < 2))
-// return NULL;
+ /* 2004-11-15 to be removed. test aggregation only */
+/* if ((OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_AGGREGATION_INUSED)) && (*pNumber < 2)) */
+/* return NULL; */
Number = pAd->TxSwQueue[QID_AC_BK].Number
+ pAd->TxSwQueue[QID_AC_BE].Number
*pQueIdx = QID_AC_BK;
return (&pAd->TxSwQueue[QID_AC_BK]);
}
- // No packet pending in Tx Sw queue
+ /* No packet pending in Tx Sw queue */
*pQueIdx = QID_AC_BK;
return (NULL);
{
DBGPRINT(RT_DEBUG_TRACE, ("SCANNING, suspend MSDU transmission ...\n"));
- //
- // Before BSS_SCAN_IN_PROGRESS, we need to keep Current R66 value and
- // use Lowbound as R66 value on ScanNextChannel(...)
- //
+ /* */
+ /* Before BSS_SCAN_IN_PROGRESS, we need to keep Current R66 value and */
+ /* use Lowbound as R66 value on ScanNextChannel(...) */
+ /* */
RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R66,
&pAd->BbpTuning.R66CurrentValue);
- // set BBP_R66 to 0x30/0x40 when scanning (AsicSwitchChannel will set R66 according to channel when scanning)
- //RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R66, (0x26 + GET_LNA_GAIN(pAd)));
+ /* set BBP_R66 to 0x30/0x40 when scanning (AsicSwitchChannel will set R66 according to channel when scanning) */
+ /*RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R66, (0x26 + GET_LNA_GAIN(pAd))); */
RTMPSetAGCInitValue(pAd, BW_20);
RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS);
- //RTMP_IO_WRITE32(pAd, TX_CNTL_CSR, 0x000f0000); // abort all TX rings
+ /*RTMP_IO_WRITE32(pAd, TX_CNTL_CSR, 0x000f0000); // abort all TX rings */
}
/*
*/
VOID RTMPResumeMsduTransmission(IN PRTMP_ADAPTER pAd)
{
-// UCHAR IrqState;
+/* UCHAR IrqState; */
DBGPRINT(RT_DEBUG_TRACE, ("SCAN done, resume MSDU transmission ...\n"));
- // After finish BSS_SCAN_IN_PROGRESS, we need to restore Current R66 value
- // R66 should not be 0
+ /* After finish BSS_SCAN_IN_PROGRESS, we need to restore Current R66 value */
+ /* R66 should not be 0 */
if (pAd->BbpTuning.R66CurrentValue == 0) {
pAd->BbpTuning.R66CurrentValue = 0x38;
DBGPRINT_ERR(("RTMPResumeMsduTransmission, R66CurrentValue=0...\n"));
pAd->BbpTuning.R66CurrentValue);
RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS);
-// sample, for IRQ LOCK to SEM LOCK
-// IrqState = pAd->irq_disabled;
-// if (IrqState)
-// RTMPDeQueuePacket(pAd, TRUE, NUM_OF_TX_RING, MAX_TX_PROCESS);
-// else
+/* sample, for IRQ LOCK to SEM LOCK */
+/* IrqState = pAd->irq_disabled; */
+/* if (IrqState) */
+/* RTMPDeQueuePacket(pAd, TRUE, NUM_OF_TX_RING, MAX_TX_PROCESS); */
+/* else */
RTMPDeQueuePacket(pAd, FALSE, NUM_OF_TX_RING, MAX_TX_PROCESS);
}
nMSDU++;
- //hex_dump("subheader", pData, 64);
+ /*hex_dump("subheader", pData, 64); */
pAMSDUsubheader = (PHEADER_802_3) pData;
- //pData += LENGTH_802_3;
+ /*pData += LENGTH_802_3; */
PayloadSize =
pAMSDUsubheader->Octet[1] +
(pAMSDUsubheader->Octet[0] << 8);
if ((DataSize < SubFrameSize) || (PayloadSize > 1518)) {
break;
}
- //DBGPRINT(RT_DEBUG_TRACE,("%d subframe: Size = %d\n", nMSDU, PayloadSize));
+ /*DBGPRINT(RT_DEBUG_TRACE,("%d subframe: Size = %d\n", nMSDU, PayloadSize)); */
pPayload = pData + LENGTH_802_3;
pDA = pData;
pSA = pData + MAC_ADDR_LEN;
- // convert to 802.3 header
+ /* convert to 802.3 header */
CONVERT_TO_802_3(Header802_3, pDA, pSA, pPayload, PayloadSize,
pRemovedLLCSNAP);
Elem->MsgLen =
LENGTH_802_11 + LENGTH_802_1_H +
PayloadSize;
- //WpaEAPOLKeyAction(pAd, Elem);
+ /*WpaEAPOLKeyAction(pAd, Elem); */
REPORT_MGMT_FRAME_TO_MLME(pAd, BSSID_WCID,
Elem->Msg,
Elem->MsgLen, 0, 0, 0,
(pPacket));
}
- // A-MSDU has padding to multiple of 4 including subframe header.
- // align SubFrameSize up to multiple of 4
+ /* A-MSDU has padding to multiple of 4 including subframe header. */
+ /* align SubFrameSize up to multiple of 4 */
SubFrameSize = (SubFrameSize + 3) & (~0x3);
if (SubFrameSize > 1528 || SubFrameSize < 32) {
pData += SubFrameSize;
DataSize -= SubFrameSize;
} else {
- // end of A-MSDU
+ /* end of A-MSDU */
DataSize = 0;
}
}
- // finally release original rx packet
+ /* finally release original rx packet */
RELEASE_NDIS_PACKET(pAd, pPacket, NDIS_STATUS_SUCCESS);
return nMSDU;
UCHAR HashIdx;
int i, FirstWcid;
MAC_TABLE_ENTRY *pEntry = NULL, *pCurrEntry;
-// USHORT offset;
-// ULONG addr;
+/* USHORT offset; */
+/* ULONG addr; */
- // if FULL, return
+ /* if FULL, return */
if (pAd->MacTab.Size >= MAX_LEN_OF_MAC_TABLE)
return NULL;
if (pAd->StaCfg.BssType == BSS_INFRA)
FirstWcid = 2;
- // allocate one MAC entry
+ /* allocate one MAC entry */
NdisAcquireSpinLock(&pAd->MacTabLock);
- for (i = FirstWcid; i < MAX_LEN_OF_MAC_TABLE; i++) // skip entry#0 so that "entry index == AID" for fast lookup
+ for (i = FirstWcid; i < MAX_LEN_OF_MAC_TABLE; i++) /* skip entry#0 so that "entry index == AID" for fast lookup */
{
- // pick up the first available vacancy
+ /* pick up the first available vacancy */
if ((pAd->MacTab.Content[i].ValidAsCLI == FALSE) &&
(pAd->MacTab.Content[i].ValidAsWDS == FALSE) &&
(pAd->MacTab.Content[i].ValidAsApCli == FALSE) &&
pEntry->
apidx,
(UCHAR) i);
-#endif // RTMP_MAC_PCI //
+#endif /* RTMP_MAC_PCI // */
}
}
COPY_MAC_ADDR(pEntry->Addr, pAddr);
pEntry->Sst = SST_NOT_AUTH;
pEntry->AuthState = AS_NOT_AUTH;
- pEntry->Aid = (USHORT) i; //0;
+ pEntry->Aid = (USHORT) i; /*0; */
pEntry->CapabilityInfo = 0;
pEntry->PsMode = PWR_ACTIVE;
pEntry->PsQIdleCount = 0;
InitializeQueueHeader(&pEntry->PsQueue);
pAd->MacTab.Size++;
- // Add this entry into ASIC RX WCID search table
+ /* Add this entry into ASIC RX WCID search table */
RTMP_STA_ENTRY_ADD(pAd, pEntry);
DBGPRINT(RT_DEBUG_TRACE,
}
}
- // add this MAC entry into HASH table
+ /* add this MAC entry into HASH table */
if (pEntry) {
HashIdx = MAC_ADDR_HASH_INDEX(pAddr);
if (pAd->MacTab.Hash[HashIdx] == NULL) {
USHORT HashIdx;
MAC_TABLE_ENTRY *pEntry, *pPrevEntry, *pProbeEntry;
BOOLEAN Cancelled;
- //USHORT offset; // unused variable
- //UCHAR j; // unused variable
+ /*USHORT offset; // unused variable */
+ /*UCHAR j; // unused variable */
if (wcid >= MAX_LEN_OF_MAC_TABLE)
return FALSE;
NdisAcquireSpinLock(&pAd->MacTabLock);
HashIdx = MAC_ADDR_HASH_INDEX(pAddr);
- //pEntry = pAd->MacTab.Hash[HashIdx];
+ /*pEntry = pAd->MacTab.Hash[HashIdx]; */
pEntry = &pAd->MacTab.Content[wcid];
if (pEntry
|| pEntry->ValidAsMesh)) {
if (MAC_ADDR_EQUAL(pEntry->Addr, pAddr)) {
- // Delete this entry from ASIC on-chip WCID Table
+ /* Delete this entry from ASIC on-chip WCID Table */
RTMP_STA_ENTRY_MAC_RESET(pAd, wcid);
- // free resources of BA
+ /* free resources of BA */
BASessionTearDownALL(pAd, pEntry->Aid);
pPrevEntry = NULL;
pProbeEntry = pAd->MacTab.Hash[HashIdx];
ASSERT(pProbeEntry);
- // update Hash list
+ /* update Hash list */
do {
if (pProbeEntry == pEntry) {
if (pPrevEntry == NULL) {
pProbeEntry = pProbeEntry->pNext;
} while (pProbeEntry);
- // not found !!!
+ /* not found !!! */
ASSERT(pProbeEntry != NULL);
RTMP_STA_ENTRY_KEY_DEL(pAd, BSS0, wcid);
NdisReleaseSpinLock(&pAd->MacTabLock);
- //Reset operating mode when no Sta.
+ /*Reset operating mode when no Sta. */
if (pAd->MacTab.Size == 0) {
pAd->CommonCfg.AddHTInfo.AddHtInfo2.OperaionMode = 0;
- //AsicUpdateProtect(pAd, 0 /*pAd->CommonCfg.AddHTInfo.AddHtInfo2.OperaionMode*/, (ALLN_SETPROTECT), TRUE, 0 /*pAd->MacTab.fAnyStationNonGF*/);
- RTMP_UPDATE_PROTECT(pAd); // edit by johnli, fix "in_interrupt" error when call "MacTableDeleteEntry" in Rx tasklet
+ RTMP_UPDATE_PROTECT(pAd); /* edit by johnli, fix "in_interrupt" error when call "MacTableDeleteEntry" in Rx tasklet */
}
return TRUE;
int i;
DBGPRINT(RT_DEBUG_TRACE, ("MacTableReset\n"));
- //NdisAcquireSpinLock(&pAd->MacTabLock);
+ /*NdisAcquireSpinLock(&pAd->MacTabLock); */
for (i = 1; i < MAX_LEN_OF_MAC_TABLE; i++) {
#ifdef RTMP_MAC_PCI
RTMP_STA_ENTRY_MAC_RESET(pAd, i);
-#endif // RTMP_MAC_PCI //
+#endif /* RTMP_MAC_PCI // */
if (pAd->MacTab.Content[i].ValidAsCLI == TRUE) {
- // free resources of BA
+ /* free resources of BA */
BASessionTearDownALL(pAd, i);
pAd->MacTab.Content[i].ValidAsCLI = FALSE;
#ifdef RTMP_MAC_USB
NdisZeroMemory(pAd->MacTab.Content[i].Addr, 6);
RTMP_STA_ENTRY_MAC_RESET(pAd, i);
-#endif // RTMP_MAC_USB //
+#endif /* RTMP_MAC_USB // */
- //AsicDelWcidTab(pAd, i);
+ /*AsicDelWcidTab(pAd, i); */
}
}
IN ULONG Timeout, IN USHORT ListenIntv)
{
COPY_MAC_ADDR(AssocReq->Addr, pAddr);
- // Add mask to support 802.11b mode only
- AssocReq->CapabilityInfo = CapabilityInfo & SUPPORTED_CAPABILITY_INFO; // not cf-pollable, not cf-poll-request
+ /* Add mask to support 802.11b mode only */
+ AssocReq->CapabilityInfo = CapabilityInfo & SUPPORTED_CAPABILITY_INFO; /* not cf-pollable, not cf-poll-request */
AssocReq->Timeout = Timeout;
AssocReq->ListenIntv = ListenIntv;
}
pSrc = (PUCHAR) pVirtualAddress;
Protocol = *(pSrc + 12) * 256 + *(pSrc + 13);
- //
- // Check DHCP & BOOTP protocol
- //
+ /* */
+ /* Check DHCP & BOOTP protocol */
+ /* */
while (NumberOfBytesRead <= PacketInfo.TotalPacketLength) {
if ((NumberOfBytesRead >= 35) && (ReadFirstParm == TRUE)) {
CurrentOffset =
CurrentOffset =
37 - (NumberOfBytesRead - NdisBufferLength);
ByteOffset38 = *(pSrc + CurrentOffset);
- //End of Read
+ /*End of Read */
break;
}
return FALSE;
}
- // Check for DHCP & BOOTP protocol
+ /* Check for DHCP & BOOTP protocol */
if ((ByteOffset36 != 0x44) || (ByteOffset38 != 0x43)) {
- //
- // 2054 (hex 0806) for ARP datagrams
- // if this packet is not ARP datagrams, then do nothing
- // ARP datagrams will also be duplicate at 1mb broadcast frames
- //
+ /* */
+ /* 2054 (hex 0806) for ARP datagrams */
+ /* if this packet is not ARP datagrams, then do nothing */
+ /* ARP datagrams will also be duplicate at 1mb broadcast frames */
+ /* */
if (Protocol != 0x0806)
return FALSE;
}
RTMP_SET_PACKET_SPECIFIC(pPacket, 0);
- // get Ethernet protocol field
+ /* get Ethernet protocol field */
TypeLen = (pSrcBuf[12] << 8) | pSrcBuf[13];
- pSrcBuf += LENGTH_802_3; // Skip the Ethernet Header.
+ pSrcBuf += LENGTH_802_3; /* Skip the Ethernet Header. */
- if (TypeLen <= 1500) { // 802.3, 802.3 LLC
+ if (TypeLen <= 1500) { /* 802.3, 802.3 LLC */
/*
DestMAC(6) + SrcMAC(6) + Lenght(2) +
DSAP(1) + SSAP(1) + Control(1) +
&Byte0, &Byte1);
RTMP_SET_PACKET_LLCSNAP(pPacket, 1);
TypeLen = (USHORT) ((Byte0 << 8) + Byte1);
- pSrcBuf += 8; // Skip this LLC/SNAP header
+ pSrcBuf += 8; /* Skip this LLC/SNAP header */
} else {
- //It just has 3-byte LLC header, maybe a legacy ether type frame. we didn't handle it.
+ /*It just has 3-byte LLC header, maybe a legacy ether type frame. we didn't handle it. */
}
}
- // If it's a VLAN packet, get the real Type/Length field.
+ /* If it's a VLAN packet, get the real Type/Length field. */
if (TypeLen == 0x8100) {
/* 0x8100 means VLAN packets */
&Byte1);
TypeLen = (USHORT) ((Byte0 << 8) + Byte1);
- pSrcBuf += 4; // Skip the VLAN Header.
+ pSrcBuf += 4; /* Skip the VLAN Header. */
}
switch (TypeLen) {
case 0x0800:
{
ASSERT((pktLen > 34));
- if (*(pSrcBuf + 9) == 0x11) { // udp packet
- ASSERT((pktLen > 34)); // 14 for ethernet header, 20 for IP header
+ if (*(pSrcBuf + 9) == 0x11) { /* udp packet */
+ ASSERT((pktLen > 34)); /* 14 for ethernet header, 20 for IP header */
- pSrcBuf += 20; // Skip the IP header
+ pSrcBuf += 20; /* Skip the IP header */
srcPort =
OS_NTOHS(get_unaligned
((PUINT16) (pSrcBuf)));
OS_NTOHS(get_unaligned
((PUINT16) (pSrcBuf + 2)));
- if ((srcPort == 0x44 && dstPort == 0x43) || (srcPort == 0x43 && dstPort == 0x44)) { //It's a BOOTP/DHCP packet
+ if ((srcPort == 0x44 && dstPort == 0x43) || (srcPort == 0x43 && dstPort == 0x44)) { /*It's a BOOTP/DHCP packet */
RTMP_SET_PACKET_DHCP(pPacket, 1);
}
}
break;
case 0x0806:
{
- //ARP Packet.
+ /*ARP Packet. */
RTMP_SET_PACKET_DHCP(pPacket, 1);
}
break;
case 0x888e:
{
- // EAPOL Packet.
+ /* EAPOL Packet. */
RTMP_SET_PACKET_EAPOL(pPacket, 1);
}
break;
}
}
-// Normal legacy Rx packet indication
+/* Normal legacy Rx packet indication */
VOID Indicate_Legacy_Packet(IN PRTMP_ADAPTER pAd,
IN RX_BLK * pRxBlk, IN UCHAR FromWhichBSSID)
{
PNDIS_PACKET pRxPacket = pRxBlk->pRxPacket;
UCHAR Header802_3[LENGTH_802_3];
- // 1. get 802.3 Header
- // 2. remove LLC
- // a. pointer pRxBlk->pData to payload
- // b. modify pRxBlk->DataSize
+ /* 1. get 802.3 Header */
+ /* 2. remove LLC */
+ /* a. pointer pRxBlk->pData to payload */
+ /* b. modify pRxBlk->DataSize */
RTMP_802_11_REMOVE_LLC_AND_CONVERT_TO_802_3(pRxBlk, Header802_3);
if (pRxBlk->DataSize > MAX_RX_PKT_LEN) {
- // release packet
+ /* release packet */
RELEASE_NDIS_PACKET(pAd, pRxPacket, NDIS_STATUS_FAILURE);
return;
}
UCHAR TID = pRxBlk->pRxWI->TID;
USHORT Idx;
-#define REORDERING_PACKET_TIMEOUT ((100 * OS_HZ)/1000) // system ticks -- 100 ms
+#define REORDERING_PACKET_TIMEOUT ((100 * OS_HZ)/1000) /* system ticks -- 100 ms */
if (Wcid < MAX_LEN_OF_MAC_TABLE) {
Idx = pAd->MacTab.Content[Wcid].BARecWcidArray[TID];
if (Idx != 0) {
pBAEntry = &pAd->BATable.BARecEntry[Idx];
- // update last rx time
+ /* update last rx time */
NdisGetSystemUpTime(&Now32);
if ((pBAEntry->list.qlen > 0) &&
RTMP_TIME_AFTER((unsigned long)Now32,
}
}
}
-#endif // RTMP_MAC_USB //
+#endif /* RTMP_MAC_USB // */
wlan_802_11_to_802_3_packet(pAd, pRxBlk, Header802_3, FromWhichBSSID);
- //
- // pass this 802.3 packet to upper layer or forward this packet to WM directly
- //
+ /* */
+ /* pass this 802.3 packet to upper layer or forward this packet to WM directly */
+ /* */
ANNOUNCE_OR_FORWARD_802_3_PACKET(pAd, pRxPacket, FromWhichBSSID);
}
-// Normal, AMPDU or AMSDU
+/* Normal, AMPDU or AMSDU */
VOID CmmRxnonRalinkFrameIndicate(IN PRTMP_ADAPTER pAd,
IN RX_BLK * pRxBlk, IN UCHAR FromWhichBSSID)
{
Indicate_AMPDU_Packet(pAd, pRxBlk, FromWhichBSSID);
} else {
if (RX_BLK_TEST_FLAG(pRxBlk, fRX_AMSDU)) {
- // handle A-MSDU
+ /* handle A-MSDU */
Indicate_AMSDU_Packet(pAd, pRxBlk, FromWhichBSSID);
} else {
Indicate_Legacy_Packet(pAd, pRxBlk, FromWhichBSSID);
pRxBlk->pData += 2;
pRxBlk->DataSize -= 2;
} else {
- // release packet
+ /* release packet */
RELEASE_NDIS_PACKET(pAd, pRxBlk->pRxPacket,
NDIS_STATUS_FAILURE);
return;
}
- // get 802.3 Header and remove LLC
+ /* get 802.3 Header and remove LLC */
RTMP_802_11_REMOVE_LLC_AND_CONVERT_TO_802_3(pRxBlk, Header802_3);
ASSERT(pRxBlk->pRxPacket);
- // Ralink Aggregation frame
+ /* Ralink Aggregation frame */
pAd->RalinkCounters.OneSecRxAggregationCount++;
Payload1Size = pRxBlk->DataSize - Msdu2Size;
Payload2Size = Msdu2Size - LENGTH_802_3;
Payload2Size, FromWhichBSSID);
if (!pPacket2) {
- // release packet
+ /* release packet */
RELEASE_NDIS_PACKET(pAd, pRxBlk->pRxPacket,
NDIS_STATUS_FAILURE);
return;
}
- // update payload size of 1st packet
+ /* update payload size of 1st packet */
pRxBlk->DataSize = Payload1Size;
wlan_802_11_to_802_3_packet(pAd, pRxBlk, Header802_3, FromWhichBSSID);
HeaderRoom = pData - (UCHAR *) pHeader;
- // Re-assemble the fragmented packets
- if (pHeader->Frag == 0) // Frag. Number is 0 : First frag or only one pkt
+ /* Re-assemble the fragmented packets */
+ if (pHeader->Frag == 0) /* Frag. Number is 0 : First frag or only one pkt */
{
- // the first pkt of fragment, record it.
+ /* the first pkt of fragment, record it. */
if (pHeader->FC.MoreFrag) {
ASSERT(pAd->FragFrame.pFragPacket);
pFragBuffer =
NdisMoveMemory(pFragBuffer, pHeader,
pAd->FragFrame.RxSize);
pAd->FragFrame.Sequence = pHeader->Sequence;
- pAd->FragFrame.LastFrag = pHeader->Frag; // Should be 0
+ pAd->FragFrame.LastFrag = pHeader->Frag; /* Should be 0 */
ASSERT(pAd->FragFrame.LastFrag == 0);
- goto done; // end of processing this frame
+ goto done; /* end of processing this frame */
}
- } else //Middle & End of fragment
+ } else /*Middle & End of fragment */
{
if ((pHeader->Sequence != pAd->FragFrame.Sequence) ||
(pHeader->Frag != (pAd->FragFrame.LastFrag + 1))) {
- // Fragment is not the same sequence or out of fragment number order
- // Reset Fragment control blk
+ /* Fragment is not the same sequence or out of fragment number order */
+ /* Reset Fragment control blk */
RESET_FRAGFRAME(pAd->FragFrame);
DBGPRINT(RT_DEBUG_ERROR,
("Fragment is not the same sequence or out of fragment number order.\n"));
- goto done; // give up this frame
+ goto done; /* give up this frame */
} else if ((pAd->FragFrame.RxSize + DataSize) > MAX_FRAME_SIZE) {
- // Fragment frame is too large, it exeeds the maximum frame size.
- // Reset Fragment control blk
+ /* Fragment frame is too large, it exeeds the maximum frame size. */
+ /* Reset Fragment control blk */
RESET_FRAGFRAME(pAd->FragFrame);
DBGPRINT(RT_DEBUG_ERROR,
("Fragment frame is too large, it exeeds the maximum frame size.\n"));
- goto done; // give up this frame
+ goto done; /* give up this frame */
}
- //
- // Broadcom AP(BCM94704AGR) will send out LLC in fragment's packet, LLC only can accpet at first fragment.
- // In this case, we will dropt it.
- //
+ /* */
+ /* Broadcom AP(BCM94704AGR) will send out LLC in fragment's packet, LLC only can accpet at first fragment. */
+ /* In this case, we will dropt it. */
+ /* */
if (NdisEqualMemory(pData, SNAP_802_1H, sizeof(SNAP_802_1H))) {
DBGPRINT(RT_DEBUG_ERROR,
("Find another LLC at Middle or End fragment(SN=%d, Frag=%d)\n",
pHeader->Sequence, pHeader->Frag));
- goto done; // give up this frame
+ goto done; /* give up this frame */
}
pFragBuffer = GET_OS_PKT_DATAPTR(pAd->FragFrame.pFragPacket);
- // concatenate this fragment into the re-assembly buffer
+ /* concatenate this fragment into the re-assembly buffer */
NdisMoveMemory((pFragBuffer + pAd->FragFrame.RxSize), pData,
DataSize);
pAd->FragFrame.RxSize += DataSize;
- pAd->FragFrame.LastFrag = pHeader->Frag; // Update fragment number
+ pAd->FragFrame.LastFrag = pHeader->Frag; /* Update fragment number */
- // Last fragment
+ /* Last fragment */
if (pHeader->FC.MoreFrag == FALSE) {
bReassDone = TRUE;
}
}
done:
- // always release rx fragmented packet
+ /* always release rx fragmented packet */
RELEASE_NDIS_PACKET(pAd, pRxPacket, NDIS_STATUS_FAILURE);
- // return defragmented packet if packet is reassembled completely
- // otherwise return NULL
+ /* return defragmented packet if packet is reassembled completely */
+ /* otherwise return NULL */
if (bReassDone) {
PNDIS_PACKET pNewFragPacket;
- // allocate a new packet buffer for fragment
+ /* allocate a new packet buffer for fragment */
pNewFragPacket =
RTMP_AllocateFragPacketBuffer(pAd, RX_BUFFER_NORMSIZE);
if (pNewFragPacket) {
- // update RxBlk
+ /* update RxBlk */
pRetPacket = pAd->FragFrame.pFragPacket;
pAd->FragFrame.pFragPacket = pNewFragPacket;
pRxBlk->pHeader =
if (pEntry == NULL) {
DBGPRINT(RT_DEBUG_WARN,
("Indicate_EAPOL_Packet: drop and release the invalid packet.\n"));
- // release packet
+ /* release packet */
RELEASE_NDIS_PACKET(pAd, pRxBlk->pRxPacket,
NDIS_STATUS_FAILURE);
return;
}
}
-#define BCN_TBTT_OFFSET 64 //defer 64 us
+#define BCN_TBTT_OFFSET 64 /*defer 64 us */
VOID ReSyncBeaconTime(IN PRTMP_ADAPTER pAd)
{
pAd->TbttTickCount++;
- //
- // The updated BeaconInterval Value will affect Beacon Interval after two TBTT
- // beacasue the original BeaconInterval had been loaded into next TBTT_TIMER
- //
+ /* */
+ /* The updated BeaconInterval Value will affect Beacon Interval after two TBTT */
+ /* beacasue the original BeaconInterval had been loaded into next TBTT_TIMER */
+ /* */
if (Offset == (BCN_TBTT_OFFSET - 2)) {
BCN_TIME_CFG_STRUC csr;
RTMP_IO_READ32(pAd, BCN_TIME_CFG, &csr.word);
- csr.field.BeaconInterval = (pAd->CommonCfg.BeaconPeriod << 4) - 1; // ASIC register in units of 1/16 TU = 64us
+ csr.field.BeaconInterval = (pAd->CommonCfg.BeaconPeriod << 4) - 1; /* ASIC register in units of 1/16 TU = 64us */
RTMP_IO_WRITE32(pAd, BCN_TIME_CFG, csr.word);
} else {
if (Offset == (BCN_TBTT_OFFSET - 1)) {
BCN_TIME_CFG_STRUC csr;
RTMP_IO_READ32(pAd, BCN_TIME_CFG, &csr.word);
- csr.field.BeaconInterval = (pAd->CommonCfg.BeaconPeriod) << 4; // ASIC register in units of 1/16 TU
+ csr.field.BeaconInterval = (pAd->CommonCfg.BeaconPeriod) << 4; /* ASIC register in units of 1/16 TU */
RTMP_IO_WRITE32(pAd, BCN_TIME_CFG, csr.word);
}
}
git://bbs.cooldavid.org / net-next-2.6.git / blobdiff