#define BUFMGR_MODE_ATTN_ENABLE 0x00000004
#define BUFMGR_MODE_BM_TEST 0x00000008
#define BUFMGR_MODE_MBLOW_ATTN_ENAB 0x00000010
+#define BUFMGR_MODE_NO_TX_UNDERRUN 0x80000000
#define BUFMGR_STATUS 0x00004404
#define BUFMGR_STATUS_ERROR 0x00000004
#define BUFMGR_STATUS_MBLOW 0x00000010
#define RDMAC_STATUS_FIFOURUN 0x00000080
#define RDMAC_STATUS_FIFOOREAD 0x00000100
#define RDMAC_STATUS_LNGREAD 0x00000200
-/* 0x4808 --> 0x4c00 unused */
+/* 0x4808 --> 0x4900 unused */
+
+#define TG3_RDMA_RSRVCTRL_REG 0x00004900
+#define TG3_RDMA_RSRVCTRL_FIFO_OFLW_FIX 0x00000004
+/* 0x4904 --> 0x4910 unused */
+
+#define TG3_LSO_RD_DMA_CRPTEN_CTRL 0x00004910
+#define TG3_LSO_RD_DMA_CRPTEN_CTRL_BLEN_BD_4K 0x00030000
+#define TG3_LSO_RD_DMA_CRPTEN_CTRL_BLEN_LSO_4K 0x000c0000
+/* 0x4914 --> 0x4c00 unused */
/* Write DMA control registers */
#define WDMAC_MODE 0x00004c00
#define TG3_PCIE_LNKCTL_L1_PLL_PD_DIS 0x00000080
/* 0x7d58 --> 0x7e70 unused */
+#define TG3_PCIE_PHY_TSTCTL 0x00007e2c
+#define TG3_PCIE_PHY_TSTCTL_PCIE10 0x00000040
+#define TG3_PCIE_PHY_TSTCTL_PSCRAM 0x00000020
+
#define TG3_PCIE_EIDLE_DELAY 0x00007e70
#define TG3_PCIE_EIDLE_DELAY_MASK 0x0000001f
#define TG3_PCIE_EIDLE_DELAY_13_CLKS 0x0000000c
#define MII_TG3_EXT_STAT 0x11 /* Extended status register */
#define MII_TG3_EXT_STAT_LPASS 0x0100
+#define MII_TG3_RXR_COUNTERS 0x14 /* Local/Remote Receiver Counts */
#define MII_TG3_DSP_RW_PORT 0x15 /* DSP coefficient read/write port */
-
+#define MII_TG3_DSP_CONTROL 0x16 /* DSP control register */
#define MII_TG3_DSP_ADDRESS 0x17 /* DSP address register */
#define MII_TG3_DSP_TAP1 0x0001
#define MII_TG3_DSP_AADJ1CH0 0x001f
#define MII_TG3_DSP_AADJ1CH3 0x601f
#define MII_TG3_DSP_AADJ1CH3_ADCCKADJ 0x0002
+#define MII_TG3_DSP_EXP1_INT_STAT 0x0f01
#define MII_TG3_DSP_EXP8 0x0f08
#define MII_TG3_DSP_EXP8_REJ2MHz 0x0001
#define MII_TG3_DSP_EXP8_AEDW 0x0200
/* APE shared memory. Accessible through BAR1 */
#define TG3_APE_FW_STATUS 0x400c
#define APE_FW_STATUS_READY 0x00000100
+#define TG3_APE_FW_FEATURES 0x4010
+#define TG3_APE_FW_FEATURE_NCSI 0x00000002
#define TG3_APE_FW_VERSION 0x4018
#define APE_FW_VERSION_MAJMSK 0xff000000
#define APE_FW_VERSION_MAJSFT 24
#define TG3_APE_HOST_SEG_SIG 0x4200
#define APE_HOST_SEG_SIG_MAGIC 0x484f5354
#define TG3_APE_HOST_SEG_LEN 0x4204
-#define APE_HOST_SEG_LEN_MAGIC 0x0000001c
+#define APE_HOST_SEG_LEN_MAGIC 0x00000020
#define TG3_APE_HOST_INIT_COUNT 0x4208
#define TG3_APE_HOST_DRIVER_ID 0x420c
#define APE_HOST_DRIVER_ID_LINUX 0xf0000000
#define APE_HOST_HEARTBEAT_INT_DISABLE 0
#define APE_HOST_HEARTBEAT_INT_5SEC 5000
#define TG3_APE_HOST_HEARTBEAT_COUNT 0x4218
+#define TG3_APE_HOST_DRVR_STATE 0x421c
+#define TG3_APE_HOST_DRVR_STATE_START 0x00000001
+#define TG3_APE_HOST_DRVR_STATE_UNLOAD 0x00000002
+#define TG3_APE_HOST_DRVR_STATE_WOL 0x00000003
+#define TG3_APE_HOST_WOL_SPEED 0x4224
+#define TG3_APE_HOST_WOL_SPEED_AUTO 0x00008000
#define TG3_APE_EVENT_STATUS 0x4300
/* When we go in and out of low power mode we need
* to swap with this state.
*/
- int phy_is_low_power;
u16 orig_speed;
u8 orig_duplex;
u8 orig_autoneg;
dma_addr_t rx_jmb_mapping;
};
-#define TG3_IRQ_MAX_VECS 5
+#define TG3_IRQ_MAX_VECS_RSS 5
+#define TG3_IRQ_MAX_VECS TG3_IRQ_MAX_VECS_RSS
struct tg3_napi {
struct napi_struct napi ____cacheline_aligned;
u32 consmbox;
u32 rx_rcb_ptr;
u16 *rx_rcb_prod_idx;
- struct tg3_rx_prodring_set *prodring;
+ struct tg3_rx_prodring_set prodring;
struct tg3_rx_buffer_desc *rx_rcb;
struct tg3_tx_buffer_desc *tx_ring;
struct vlan_group *vlgrp;
#endif
- struct tg3_rx_prodring_set prodring[TG3_IRQ_MAX_VECS];
-
/* begin "everything else" cacheline(s) section */
struct rtnl_link_stats64 net_stats;
#define TG3_FLAG_TXD_MBOX_HWBUG 0x00000002
#define TG3_FLAG_RX_CHECKSUMS 0x00000004
#define TG3_FLAG_USE_LINKCHG_REG 0x00000008
-#define TG3_FLAG_USE_MI_INTERRUPT 0x00000010
#define TG3_FLAG_ENABLE_ASF 0x00000020
#define TG3_FLAG_ASPM_WORKAROUND 0x00000040
#define TG3_FLAG_POLL_SERDES 0x00000080
#define TG3_FLAG_TX_RECOVERY_PENDING 0x00200000
#define TG3_FLAG_WOL_CAP 0x00400000
#define TG3_FLAG_JUMBO_RING_ENABLE 0x00800000
-#define TG3_FLAG_10_100_ONLY 0x01000000
#define TG3_FLAG_PAUSE_AUTONEG 0x02000000
#define TG3_FLAG_CPMU_PRESENT 0x04000000
#define TG3_FLAG_40BIT_DMA_BUG 0x08000000
u32 tg3_flags2;
#define TG3_FLG2_RESTART_TIMER 0x00000001
#define TG3_FLG2_TSO_BUG 0x00000002
-#define TG3_FLG2_NO_ETH_WIRE_SPEED 0x00000004
#define TG3_FLG2_IS_5788 0x00000008
#define TG3_FLG2_MAX_RXPEND_64 0x00000010
#define TG3_FLG2_TSO_CAPABLE 0x00000020
-#define TG3_FLG2_PHY_ADC_BUG 0x00000040
-#define TG3_FLG2_PHY_5704_A0_BUG 0x00000080
-#define TG3_FLG2_PHY_BER_BUG 0x00000100
#define TG3_FLG2_PCI_EXPRESS 0x00000200
#define TG3_FLG2_ASF_NEW_HANDSHAKE 0x00000400
#define TG3_FLG2_HW_AUTONEG 0x00000800
#define TG3_FLG2_IS_NIC 0x00001000
-#define TG3_FLG2_PHY_SERDES 0x00002000
-#define TG3_FLG2_CAPACITIVE_COUPLING 0x00004000
#define TG3_FLG2_FLASH 0x00008000
#define TG3_FLG2_HW_TSO_1 0x00010000
-#define TG3_FLG2_SERDES_PREEMPHASIS 0x00020000
#define TG3_FLG2_5705_PLUS 0x00040000
#define TG3_FLG2_5750_PLUS 0x00080000
#define TG3_FLG2_HW_TSO_3 0x00100000
#define TG3_FLG2_USING_MSIX 0x00400000
#define TG3_FLG2_USING_MSI_OR_MSIX (TG3_FLG2_USING_MSI | \
TG3_FLG2_USING_MSIX)
-#define TG3_FLG2_MII_SERDES 0x00800000
-#define TG3_FLG2_ANY_SERDES (TG3_FLG2_PHY_SERDES | \
- TG3_FLG2_MII_SERDES)
-#define TG3_FLG2_PARALLEL_DETECT 0x01000000
#define TG3_FLG2_ICH_WORKAROUND 0x02000000
#define TG3_FLG2_5780_CLASS 0x04000000
#define TG3_FLG2_HW_TSO_2 0x08000000
TG3_FLG2_HW_TSO_2 | \
TG3_FLG2_HW_TSO_3)
#define TG3_FLG2_1SHOT_MSI 0x10000000
-#define TG3_FLG2_PHY_JITTER_BUG 0x20000000
#define TG3_FLG2_NO_FWARE_REPORTED 0x40000000
-#define TG3_FLG2_PHY_ADJUST_TRIM 0x80000000
u32 tg3_flags3;
#define TG3_FLG3_NO_NVRAM_ADDR_TRANS 0x00000001
#define TG3_FLG3_ENABLE_APE 0x00000002
#define TG3_FLG3_5701_DMA_BUG 0x00000008
#define TG3_FLG3_USE_PHYLIB 0x00000010
#define TG3_FLG3_MDIOBUS_INITED 0x00000020
-#define TG3_FLG3_PHY_CONNECTED 0x00000080
#define TG3_FLG3_RGMII_INBAND_DISABLE 0x00000100
#define TG3_FLG3_RGMII_EXT_IBND_RX_EN 0x00000200
#define TG3_FLG3_RGMII_EXT_IBND_TX_EN 0x00000400
#define TG3_FLG3_CLKREQ_BUG 0x00000800
-#define TG3_FLG3_PHY_ENABLE_APD 0x00001000
#define TG3_FLG3_5755_PLUS 0x00002000
#define TG3_FLG3_NO_NVRAM 0x00004000
-#define TG3_FLG3_PHY_IS_FET 0x00010000
#define TG3_FLG3_ENABLE_RSS 0x00020000
#define TG3_FLG3_ENABLE_TSS 0x00040000
#define TG3_FLG3_4G_DMA_BNDRY_BUG 0x00080000
#define TG3_FLG3_SHORT_DMA_BUG 0x00200000
#define TG3_FLG3_USE_JUMBO_BDFLAG 0x00400000
#define TG3_FLG3_L1PLLPD_EN 0x00800000
+#define TG3_FLG3_5717_PLUS 0x01000000
+#define TG3_FLG3_APE_HAS_NCSI 0x02000000
struct timer_list timer;
u16 timer_counter;
(X) == TG3_PHY_ID_BCM57765 || (X) == TG3_PHY_ID_BCM5719C || \
(X) == TG3_PHY_ID_BCM8002)
+ u32 phy_flags;
+#define TG3_PHYFLG_IS_LOW_POWER 0x00000001
+#define TG3_PHYFLG_IS_CONNECTED 0x00000002
+#define TG3_PHYFLG_USE_MI_INTERRUPT 0x00000004
+#define TG3_PHYFLG_PHY_SERDES 0x00000010
+#define TG3_PHYFLG_MII_SERDES 0x00000020
+#define TG3_PHYFLG_ANY_SERDES (TG3_PHYFLG_PHY_SERDES | \
+ TG3_PHYFLG_MII_SERDES)
+#define TG3_PHYFLG_IS_FET 0x00000040
+#define TG3_PHYFLG_10_100_ONLY 0x00000080
+#define TG3_PHYFLG_ENABLE_APD 0x00000100
+#define TG3_PHYFLG_CAPACITIVE_COUPLING 0x00000200
+#define TG3_PHYFLG_NO_ETH_WIRE_SPEED 0x00000400
+#define TG3_PHYFLG_JITTER_BUG 0x00000800
+#define TG3_PHYFLG_ADJUST_TRIM 0x00001000
+#define TG3_PHYFLG_ADC_BUG 0x00002000
+#define TG3_PHYFLG_5704_A0_BUG 0x00004000
+#define TG3_PHYFLG_BER_BUG 0x00008000
+#define TG3_PHYFLG_SERDES_PREEMPHASIS 0x00010000
+#define TG3_PHYFLG_PARALLEL_DETECT 0x00020000
+
u32 led_ctrl;
u32 phy_otp;
git://bbs.cooldavid.org / net-next-2.6.git / blobdiff