#include <linux/inetdevice.h>
#include <linux/sysfs.h>
-MODULE_DESCRIPTION("QLogic 10 GbE Converged Ethernet Driver");
+MODULE_DESCRIPTION("QLogic 1/10 GbE Converged/Intelligent Ethernet Driver");
MODULE_LICENSE("GPL");
MODULE_VERSION(QLCNIC_LINUX_VERSIONID);
MODULE_FIRMWARE(QLCNIC_UNIFIED_ROMIMAGE_NAME);
char qlcnic_driver_name[] = "qlcnic";
-static const char qlcnic_driver_string[] = "QLogic Converged Ethernet Driver v"
- QLCNIC_LINUX_VERSIONID;
+static const char qlcnic_driver_string[] = "QLogic 1/10 GbE "
+ "Converged/Intelligent Ethernet Driver v" QLCNIC_LINUX_VERSIONID;
static int port_mode = QLCNIC_PORT_MODE_AUTO_NEG;
module_param(load_fw_file, int, 0644);
MODULE_PARM_DESC(load_fw_file, "Load firmware from (0=flash, 1=file");
+static int qlcnic_config_npars;
+module_param(qlcnic_config_npars, int, 0644);
+MODULE_PARM_DESC(qlcnic_config_npars, "Configure NPARs (0=disabled, 1=enabled");
+
static int __devinit qlcnic_probe(struct pci_dev *pdev,
const struct pci_device_id *ent);
static void __devexit qlcnic_remove(struct pci_dev *pdev);
static struct net_device_stats *qlcnic_get_stats(struct net_device *netdev);
static void qlcnic_config_indev_addr(struct net_device *dev, unsigned long);
-
+static int qlcnic_start_firmware(struct qlcnic_adapter *);
+
+static void qlcnic_dev_set_npar_ready(struct qlcnic_adapter *);
+static void qlcnicvf_clear_ilb_mode(struct qlcnic_adapter *);
+static int qlcnicvf_set_ilb_mode(struct qlcnic_adapter *);
+static int qlcnicvf_config_led(struct qlcnic_adapter *, u32, u32);
+static int qlcnicvf_config_bridged_mode(struct qlcnic_adapter *, u32);
+static int qlcnicvf_start_firmware(struct qlcnic_adapter *);
/* PCI Device ID Table */
#define ENTRY(device) \
{PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, (device)), \
static int
qlcnic_read_mac_addr(struct qlcnic_adapter *adapter)
{
- int i;
- unsigned char *p;
- u64 mac_addr;
+ u8 mac_addr[ETH_ALEN];
struct net_device *netdev = adapter->netdev;
struct pci_dev *pdev = adapter->pdev;
- if (qlcnic_get_mac_addr(adapter, &mac_addr) != 0)
+ if (adapter->nic_ops->get_mac_addr(adapter, mac_addr) != 0)
return -EIO;
- p = (unsigned char *)&mac_addr;
- for (i = 0; i < 6; i++)
- netdev->dev_addr[i] = *(p + 5 - i);
-
+ memcpy(netdev->dev_addr, mac_addr, ETH_ALEN);
memcpy(netdev->perm_addr, netdev->dev_addr, netdev->addr_len);
memcpy(adapter->mac_addr, netdev->dev_addr, netdev->addr_len);
#endif
};
+static struct qlcnic_nic_template qlcnic_ops = {
+ .get_mac_addr = qlcnic_get_mac_addr,
+ .config_bridged_mode = qlcnic_config_bridged_mode,
+ .config_led = qlcnic_config_led,
+ .set_ilb_mode = qlcnic_set_ilb_mode,
+ .clear_ilb_mode = qlcnic_clear_ilb_mode,
+ .start_firmware = qlcnic_start_firmware
+};
+
+static struct qlcnic_nic_template qlcnic_pf_ops = {
+ .get_mac_addr = qlcnic_get_mac_address,
+ .config_bridged_mode = qlcnic_config_bridged_mode,
+ .config_led = qlcnic_config_led,
+ .set_ilb_mode = qlcnic_set_ilb_mode,
+ .clear_ilb_mode = qlcnic_clear_ilb_mode,
+ .start_firmware = qlcnic_start_firmware
+};
+
+static struct qlcnic_nic_template qlcnic_vf_ops = {
+ .get_mac_addr = qlcnic_get_mac_address,
+ .config_bridged_mode = qlcnicvf_config_bridged_mode,
+ .config_led = qlcnicvf_config_led,
+ .set_ilb_mode = qlcnicvf_set_ilb_mode,
+ .clear_ilb_mode = qlcnicvf_clear_ilb_mode,
+ .start_firmware = qlcnicvf_start_firmware
+};
+
static void
qlcnic_setup_intr(struct qlcnic_adapter *adapter)
{
iounmap(adapter->ahw.pci_base0);
}
+static int
+qlcnic_set_function_modes(struct qlcnic_adapter *adapter)
+{
+ u8 id;
+ u32 ref_count;
+ int i, ret = 1;
+ u32 data = QLCNIC_MGMT_FUNC;
+ void __iomem *priv_op = adapter->ahw.pci_base0 + QLCNIC_DRV_OP_MODE;
+
+ /* If other drivers are not in use set their privilege level */
+ ref_count = QLCRD32(adapter, QLCNIC_CRB_DEV_REF_COUNT);
+ ret = qlcnic_api_lock(adapter);
+ if (ret)
+ goto err_lock;
+ if (QLC_DEV_CLR_REF_CNT(ref_count, adapter->ahw.pci_func))
+ goto err_npar;
+
+ if (qlcnic_config_npars) {
+ for (i = 0; i < QLCNIC_MAX_PCI_FUNC; i++) {
+ id = adapter->npars[i].id;
+ if (adapter->npars[i].type != QLCNIC_TYPE_NIC ||
+ id == adapter->ahw.pci_func)
+ continue;
+ data |= (qlcnic_config_npars &
+ QLC_DEV_SET_DRV(0xf, id));
+ }
+ } else {
+ data = readl(priv_op);
+ data = (data & ~QLC_DEV_SET_DRV(0xf, adapter->ahw.pci_func)) |
+ (QLC_DEV_SET_DRV(QLCNIC_MGMT_FUNC,
+ adapter->ahw.pci_func));
+ }
+ writel(data, priv_op);
+err_npar:
+ qlcnic_api_unlock(adapter);
+err_lock:
+ return ret;
+}
+
+static u32
+qlcnic_get_driver_mode(struct qlcnic_adapter *adapter)
+{
+ void __iomem *msix_base_addr;
+ void __iomem *priv_op;
+ u32 func;
+ u32 msix_base;
+ u32 op_mode, priv_level;
+
+ /* Determine FW API version */
+ adapter->fw_hal_version = readl(adapter->ahw.pci_base0 + QLCNIC_FW_API);
+ if (adapter->fw_hal_version == ~0) {
+ adapter->nic_ops = &qlcnic_ops;
+ adapter->fw_hal_version = QLCNIC_FW_BASE;
+ adapter->ahw.pci_func = PCI_FUNC(adapter->pdev->devfn);
+ adapter->capabilities = QLCRD32(adapter, CRB_FW_CAPABILITIES_1);
+ dev_info(&adapter->pdev->dev,
+ "FW does not support nic partion\n");
+ return adapter->fw_hal_version;
+ }
+
+ /* Find PCI function number */
+ pci_read_config_dword(adapter->pdev, QLCNIC_MSIX_TABLE_OFFSET, &func);
+ msix_base_addr = adapter->ahw.pci_base0 + QLCNIC_MSIX_BASE;
+ msix_base = readl(msix_base_addr);
+ func = (func - msix_base)/QLCNIC_MSIX_TBL_PGSIZE;
+ adapter->ahw.pci_func = func;
+
+ qlcnic_get_nic_info(adapter, adapter->ahw.pci_func);
+
+ if (!(adapter->flags & QLCNIC_ESWITCH_ENABLED)) {
+ adapter->nic_ops = &qlcnic_ops;
+ return adapter->fw_hal_version;
+ }
+
+ /* Determine function privilege level */
+ priv_op = adapter->ahw.pci_base0 + QLCNIC_DRV_OP_MODE;
+ op_mode = readl(priv_op);
+ if (op_mode == QLC_DEV_DRV_DEFAULT)
+ priv_level = QLCNIC_MGMT_FUNC;
+ else
+ priv_level = QLC_DEV_GET_DRV(op_mode, adapter->ahw.pci_func);
+
+ switch (priv_level) {
+ case QLCNIC_MGMT_FUNC:
+ adapter->op_mode = QLCNIC_MGMT_FUNC;
+ adapter->nic_ops = &qlcnic_pf_ops;
+ qlcnic_get_pci_info(adapter);
+ /* Set privilege level for other functions */
+ qlcnic_set_function_modes(adapter);
+ dev_info(&adapter->pdev->dev,
+ "HAL Version: %d, Management function\n",
+ adapter->fw_hal_version);
+ break;
+ case QLCNIC_PRIV_FUNC:
+ adapter->op_mode = QLCNIC_PRIV_FUNC;
+ dev_info(&adapter->pdev->dev,
+ "HAL Version: %d, Privileged function\n",
+ adapter->fw_hal_version);
+ adapter->nic_ops = &qlcnic_pf_ops;
+ break;
+ case QLCNIC_NON_PRIV_FUNC:
+ adapter->op_mode = QLCNIC_NON_PRIV_FUNC;
+ dev_info(&adapter->pdev->dev,
+ "HAL Version: %d Non Privileged function\n",
+ adapter->fw_hal_version);
+ adapter->nic_ops = &qlcnic_vf_ops;
+ break;
+ default:
+ dev_info(&adapter->pdev->dev, "Unknown function mode: %d\n",
+ priv_level);
+ return 0;
+ }
+ return adapter->fw_hal_version;
+}
+
static int
qlcnic_setup_pci_map(struct qlcnic_adapter *adapter)
{
unsigned long mem_len, pci_len0 = 0;
struct pci_dev *pdev = adapter->pdev;
- int pci_func = adapter->ahw.pci_func;
/* remap phys address */
mem_base = pci_resource_start(pdev, 0); /* 0 is for BAR 0 */
adapter->ahw.pci_base0 = mem_ptr0;
adapter->ahw.pci_len0 = pci_len0;
+ if (!qlcnic_get_driver_mode(adapter)) {
+ iounmap(adapter->ahw.pci_base0);
+ return -EIO;
+ }
+
adapter->ahw.ocm_win_crb = qlcnic_get_ioaddr(adapter,
- QLCNIC_PCIX_PS_REG(PCIX_OCM_WINDOW_REG(pci_func)));
+ QLCNIC_PCIX_PS_REG(PCIX_OCM_WINDOW_REG(adapter->ahw.pci_func)));
return 0;
}
}
if (!found)
- name = "Unknown";
+ sprintf(name, "%pM Gigabit Ethernet", adapter->mac_addr);
}
static void
dev_info(&pdev->dev, "firmware v%d.%d.%d\n",
fw_major, fw_minor, fw_build);
- adapter->capabilities = QLCRD32(adapter, CRB_FW_CAPABILITIES_1);
-
adapter->flags &= ~QLCNIC_LRO_ENABLED;
if (adapter->ahw.port_type == QLCNIC_XGBE) {
adapter->num_jumbo_rxd = MAX_JUMBO_RCV_DESCRIPTORS_1G;
}
+ qlcnic_get_nic_info(adapter, adapter->ahw.pci_func);
+
adapter->msix_supported = !!use_msi_x;
adapter->rss_supported = !!use_msi_x;
qlcnic_check_options(adapter);
+ if (adapter->flags & QLCNIC_ESWITCH_ENABLED &&
+ adapter->op_mode != QLCNIC_NON_PRIV_FUNC)
+ qlcnic_dev_set_npar_ready(adapter);
+
adapter->need_fw_reset = 0;
qlcnic_release_firmware(adapter);
SET_ETHTOOL_OPS(netdev, &qlcnic_ethtool_ops);
- netdev->features |= (NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_TSO);
- netdev->features |= (NETIF_F_GRO);
- netdev->vlan_features |= (NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_TSO);
+ netdev->features |= (NETIF_F_SG | NETIF_F_IP_CSUM |
+ NETIF_F_IPV6_CSUM | NETIF_F_GRO | NETIF_F_TSO | NETIF_F_TSO6);
- netdev->features |= (NETIF_F_IPV6_CSUM | NETIF_F_TSO6);
- netdev->vlan_features |= (NETIF_F_IPV6_CSUM | NETIF_F_TSO6);
+ netdev->vlan_features |= (NETIF_F_SG | NETIF_F_IP_CSUM |
+ NETIF_F_IPV6_CSUM | NETIF_F_TSO | NETIF_F_TSO6);
if (pci_using_dac) {
netdev->features |= NETIF_F_HIGHDMA;
struct net_device *netdev = NULL;
struct qlcnic_adapter *adapter = NULL;
int err;
- int pci_func_id = PCI_FUNC(pdev->devfn);
uint8_t revision_id;
uint8_t pci_using_dac;
adapter->netdev = netdev;
adapter->pdev = pdev;
adapter->dev_rst_time = jiffies;
- adapter->ahw.pci_func = pci_func_id;
revision_id = pdev->revision;
adapter->ahw.revision_id = revision_id;
goto err_out_free_netdev;
/* This will be reset for mezz cards */
- adapter->portnum = pci_func_id;
+ adapter->portnum = adapter->ahw.pci_func;
err = qlcnic_get_board_info(adapter);
if (err) {
if (qlcnic_setup_idc_param(adapter))
goto err_out_iounmap;
- err = qlcnic_start_firmware(adapter);
+ err = adapter->nic_ops->start_firmware(adapter);
if (err) {
dev_err(&pdev->dev, "Loading fw failed.Please Reboot\n");
goto err_out_decr_ref;
qlcnic_detach(adapter);
+ if (adapter->npars != NULL)
+ kfree(adapter->npars);
+ if (adapter->eswitch != NULL)
+ kfree(adapter->eswitch);
+
qlcnic_clr_all_drv_state(adapter);
clear_bit(__QLCNIC_RESETTING, &adapter->state);
pci_set_master(pdev);
pci_restore_state(pdev);
- err = qlcnic_start_firmware(adapter);
+ err = adapter->nic_ops->start_firmware(adapter);
if (err) {
dev_err(&pdev->dev, "failed to start firmware\n");
return err;
u8 opcode = TX_ETHER_PKT;
__be16 protocol = skb->protocol;
u16 flags = 0, vid = 0;
- u32 producer;
int copied, offset, copy_len, hdr_len = 0, tso = 0, vlan_oob = 0;
struct cmd_desc_type0 *hwdesc;
struct vlan_ethhdr *vh;
struct qlcnic_adapter *adapter = netdev_priv(netdev);
+ u32 producer = tx_ring->producer;
if (protocol == cpu_to_be16(ETH_P_8021Q)) {
vlan_oob = 1;
}
+ if (*(skb->data) & BIT_0) {
+ flags |= BIT_0;
+ memcpy(&first_desc->eth_addr, skb->data, ETH_ALEN);
+ }
+
if ((netdev->features & (NETIF_F_TSO | NETIF_F_TSO6)) &&
skb_shinfo(skb)->gso_size > 0) {
/* For LSO, we need to copy the MAC/IP/TCP headers into
* the descriptor ring
*/
- producer = tx_ring->producer;
copied = 0;
offset = 2;
{
struct qlcnic_adapter *adapter = container_of(work,
struct qlcnic_adapter, fw_work.work);
- u32 dev_state = 0xf;
+ u32 dev_state = 0xf, npar_state;
if (qlcnic_api_lock(adapter))
goto err_ret;
return;
}
+ if (adapter->op_mode == QLCNIC_NON_PRIV_FUNC) {
+ npar_state = QLCRD32(adapter, QLCNIC_CRB_DEV_NPAR_STATE);
+ if (npar_state == QLCNIC_DEV_NPAR_RDY) {
+ qlcnic_api_unlock(adapter);
+ goto wait_npar;
+ } else {
+ qlcnic_schedule_work(adapter, qlcnic_fwinit_work,
+ FW_POLL_DELAY);
+ qlcnic_api_unlock(adapter);
+ return;
+ }
+ }
+
if (adapter->fw_wait_cnt++ > adapter->reset_ack_timeo) {
dev_err(&adapter->pdev->dev, "Reset:Failed to get ack %d sec\n",
adapter->reset_ack_timeo);
qlcnic_api_unlock(adapter);
- if (!qlcnic_start_firmware(adapter)) {
+ if (!adapter->nic_ops->start_firmware(adapter)) {
qlcnic_schedule_work(adapter, qlcnic_attach_work, 0);
return;
}
qlcnic_api_unlock(adapter);
+wait_npar:
dev_state = QLCRD32(adapter, QLCNIC_CRB_DEV_STATE);
QLCDB(adapter, HW, "Func waiting: Device state=%u\n", dev_state);
break;
default:
- if (!qlcnic_start_firmware(adapter)) {
+ if (!adapter->nic_ops->start_firmware(adapter)) {
qlcnic_schedule_work(adapter, qlcnic_attach_work, 0);
return;
}
qlcnic_api_unlock(adapter);
}
+/* Transit to NPAR READY state from NPAR NOT READY state */
+static void
+qlcnic_dev_set_npar_ready(struct qlcnic_adapter *adapter)
+{
+ u32 state;
+
+ if (qlcnic_api_lock(adapter))
+ return;
+
+ state = QLCRD32(adapter, QLCNIC_CRB_DEV_NPAR_STATE);
+
+ if (state != QLCNIC_DEV_NPAR_RDY) {
+ QLCWR32(adapter, QLCNIC_CRB_DEV_NPAR_STATE,
+ QLCNIC_DEV_NPAR_RDY);
+ QLCDB(adapter, DRV, "NPAR READY state set\n");
+ }
+
+ qlcnic_api_unlock(adapter);
+}
+
static void
qlcnic_schedule_work(struct qlcnic_adapter *adapter,
work_func_t func, int delay)
qlcnic_schedule_work(adapter, qlcnic_fw_poll_work, FW_POLL_DELAY);
}
+static int
+qlcnicvf_start_firmware(struct qlcnic_adapter *adapter)
+{
+ int err;
+
+ err = qlcnic_can_start_firmware(adapter);
+ if (err)
+ return err;
+
+ qlcnic_check_options(adapter);
+
+ adapter->need_fw_reset = 0;
+
+ return err;
+}
+
+static int
+qlcnicvf_config_bridged_mode(struct qlcnic_adapter *adapter, u32 enable)
+{
+ return -EOPNOTSUPP;
+}
+
+static int
+qlcnicvf_config_led(struct qlcnic_adapter *adapter, u32 state, u32 rate)
+{
+ return -EOPNOTSUPP;
+}
+
+static int
+qlcnicvf_set_ilb_mode(struct qlcnic_adapter *adapter)
+{
+ return -EOPNOTSUPP;
+}
+
+static void
+qlcnicvf_clear_ilb_mode(struct qlcnic_adapter *adapter)
+{
+ return;
+}
+
static ssize_t
qlcnic_store_bridged_mode(struct device *dev,
struct device_attribute *attr, const char *buf, size_t len)
if (strict_strtoul(buf, 2, &new))
goto err_out;
- if (!qlcnic_config_bridged_mode(adapter, !!new))
+ if (!adapter->nic_ops->config_bridged_mode(adapter, !!new))
ret = len;
err_out:
git://bbs.cooldavid.org / net-next-2.6.git / blobdiff