qlcnic: change all P3 references to P3P

[net-next-2.6.git] / drivers / net / qlcnic / qlcnic_hw.c

diff --git a/drivers/net/qlcnic/qlcnic_hw.c b/drivers/net/qlcnic/qlcnic_hw.c
index c198df90ff3ce91b90728543d5e6d7fc5d74b506..7a47a2a7ee2763b88b3b6cca21ca6f418c553465 100644 (file)
--- a/drivers/net/qlcnic/qlcnic_hw.c
+++ b/drivers/net/qlcnic/qlcnic_hw.c
@@ -375,10 +375,11 @@ qlcnic_send_cmd_descs(struct qlcnic_adapter *adapter,
 
 static int
 qlcnic_sre_macaddr_change(struct qlcnic_adapter *adapter, u8 *addr,
-                               u16 vlan_id, unsigned op)
+                               __le16 vlan_id, unsigned op)
 {
        struct qlcnic_nic_req req;
        struct qlcnic_mac_req *mac_req;
+       struct qlcnic_vlan_req *vlan_req;
        u64 word;
 
        memset(&req, 0, sizeof(struct qlcnic_nic_req));
@@ -391,7 +392,8 @@ qlcnic_sre_macaddr_change(struct qlcnic_adapter *adapter, u8 *addr,
        mac_req->op = op;
        memcpy(mac_req->mac_addr, addr, 6);
 
-       req.words[1] = cpu_to_le64(vlan_id);
+       vlan_req = (struct qlcnic_vlan_req *)&req.words[1];
+       vlan_req->vlan_id = vlan_id;
 
        return qlcnic_send_cmd_descs(adapter, (struct cmd_desc_type0 *)&req, 1);
 }
@@ -440,7 +442,8 @@ void qlcnic_set_multi(struct net_device *netdev)
        qlcnic_nic_add_mac(adapter, bcast_addr);
 
        if (netdev->flags & IFF_PROMISC) {
-               mode = VPORT_MISS_MODE_ACCEPT_ALL;
+               if (!(adapter->flags & QLCNIC_PROMISC_DISABLED))
+                       mode = VPORT_MISS_MODE_ACCEPT_ALL;
                goto send_fw_cmd;
        }
 
@@ -580,9 +583,6 @@ int qlcnic_config_hw_lro(struct qlcnic_adapter *adapter, int enable)
        u64 word;
        int rv;
 
-       if ((adapter->flags & QLCNIC_LRO_ENABLED) == enable)
-               return 0;
-
        memset(&req, 0, sizeof(struct qlcnic_nic_req));
 
        req.qhdr = cpu_to_le64(QLCNIC_HOST_REQUEST << 23);
@@ -597,8 +597,6 @@ int qlcnic_config_hw_lro(struct qlcnic_adapter *adapter, int enable)
                dev_err(&adapter->netdev->dev,
                        "Could not send configure hw lro request\n");
 
-       adapter->flags ^= QLCNIC_LRO_ENABLED;
-
        return rv;
 }
 
@@ -676,9 +674,10 @@ int qlcnic_config_rss(struct qlcnic_adapter *adapter, int enable)
        return rv;
 }
 
-int qlcnic_config_ipaddr(struct qlcnic_adapter *adapter, u32 ip, int cmd)
+int qlcnic_config_ipaddr(struct qlcnic_adapter *adapter, __be32 ip, int cmd)
 {
        struct qlcnic_nic_req req;
+       struct qlcnic_ipaddr *ipa;
        u64 word;
        int rv;
 
@@ -689,7 +688,8 @@ int qlcnic_config_ipaddr(struct qlcnic_adapter *adapter, u32 ip, int cmd)
        req.req_hdr = cpu_to_le64(word);
 
        req.words[0] = cpu_to_le64(cmd);
-       req.words[1] = cpu_to_le64(ip);
+       ipa = (struct qlcnic_ipaddr *)&req.words[1];
+       ipa->ipv4 = ip;
 
        rv = qlcnic_send_cmd_descs(adapter, (struct cmd_desc_type0 *)&req, 1);
        if (rv != 0)
@@ -754,9 +754,9 @@ int qlcnic_change_mtu(struct net_device *netdev, int mtu)
        struct qlcnic_adapter *adapter = netdev_priv(netdev);
        int rc = 0;
 
-       if (mtu > P3_MAX_MTU) {
-               dev_err(&adapter->netdev->dev, "mtu > %d bytes unsupported\n",
-                                               P3_MAX_MTU);
+       if (mtu < P3P_MIN_MTU || mtu > P3P_MAX_MTU) {
+               dev_err(&adapter->netdev->dev, "%d bytes < mtu < %d bytes"
+                       " not supported\n", P3P_MAX_MTU, P3P_MIN_MTU);
                return -EINVAL;
        }
 
@@ -1161,31 +1161,31 @@ int qlcnic_get_board_info(struct qlcnic_adapter *adapter)
 
        adapter->ahw.board_type = board_type;
 
-       if (board_type == QLCNIC_BRDTYPE_P3_4_GB_MM) {
+       if (board_type == QLCNIC_BRDTYPE_P3P_4_GB_MM) {
                u32 gpio = QLCRD32(adapter, QLCNIC_ROMUSB_GLB_PAD_GPIO_I);
                if ((gpio & 0x8000) == 0)
-                       board_type = QLCNIC_BRDTYPE_P3_10G_TP;
+                       board_type = QLCNIC_BRDTYPE_P3P_10G_TP;
        }
 
        switch (board_type) {
-       case QLCNIC_BRDTYPE_P3_HMEZ:
-       case QLCNIC_BRDTYPE_P3_XG_LOM:
-       case QLCNIC_BRDTYPE_P3_10G_CX4:
-       case QLCNIC_BRDTYPE_P3_10G_CX4_LP:
-       case QLCNIC_BRDTYPE_P3_IMEZ:
-       case QLCNIC_BRDTYPE_P3_10G_SFP_PLUS:
-       case QLCNIC_BRDTYPE_P3_10G_SFP_CT:
-       case QLCNIC_BRDTYPE_P3_10G_SFP_QT:
-       case QLCNIC_BRDTYPE_P3_10G_XFP:
-       case QLCNIC_BRDTYPE_P3_10000_BASE_T:
+       case QLCNIC_BRDTYPE_P3P_HMEZ:
+       case QLCNIC_BRDTYPE_P3P_XG_LOM:
+       case QLCNIC_BRDTYPE_P3P_10G_CX4:
+       case QLCNIC_BRDTYPE_P3P_10G_CX4_LP:
+       case QLCNIC_BRDTYPE_P3P_IMEZ:
+       case QLCNIC_BRDTYPE_P3P_10G_SFP_PLUS:
+       case QLCNIC_BRDTYPE_P3P_10G_SFP_CT:
+       case QLCNIC_BRDTYPE_P3P_10G_SFP_QT:
+       case QLCNIC_BRDTYPE_P3P_10G_XFP:
+       case QLCNIC_BRDTYPE_P3P_10000_BASE_T:
                adapter->ahw.port_type = QLCNIC_XGBE;
                break;
-       case QLCNIC_BRDTYPE_P3_REF_QG:
-       case QLCNIC_BRDTYPE_P3_4_GB:
-       case QLCNIC_BRDTYPE_P3_4_GB_MM:
+       case QLCNIC_BRDTYPE_P3P_REF_QG:
+       case QLCNIC_BRDTYPE_P3P_4_GB:
+       case QLCNIC_BRDTYPE_P3P_4_GB_MM:
                adapter->ahw.port_type = QLCNIC_GBE;
                break;
-       case QLCNIC_BRDTYPE_P3_10G_TP:
+       case QLCNIC_BRDTYPE_P3P_10G_TP:
                adapter->ahw.port_type = (adapter->portnum < 2) ?
                        QLCNIC_XGBE : QLCNIC_GBE;
                break;